[ 0.000000] Linux version 6.1.95+ (osstest@godello0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Wed Jun 26 13:06:55 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/rimava1--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000095fff] usable [ 0.000000] Xen: [mem 0x0000000000096000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020069fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SCM/H8SCM, BIOS 3.5 11/25/2013 [ 0.000000] Hypervisor detected: Xen PV [ 0.037575] tsc: Fast TSC calibration using PIT [ 0.037577] tsc: Detected 3101.141 MHz processor [ 0.037578] tsc: Detected 3101.162 MHz TSC [ 0.037797] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.037801] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.037808] last_pfn = 0x2006a max_arch_pfn = 0x400000000 [ 0.037810] Disabled [ 0.037812] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.037817] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.063262] RAMDISK: [mem 0x04000000-0x0537dfff] [ 0.063289] ACPI: Early table checksum verification disabled [ 0.064807] ACPI: RSDP 0x00000000000FA1D0 000024 (v02 ACPIAM) [ 0.064821] ACPI: XSDT 0x00000000DFEA0100 000084 (v01 SMCI 20131125 MSFT 00000097) [ 0.064865] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.064929] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20220331/tbfadt-564) [ 0.064942] ACPI: DSDT 0x00000000DFEA0600 005699 (v01 1BA11 1BA11000 00000000 INTL 20051117) [ 0.064990] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.065000] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.065011] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.065023] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.065034] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.065045] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.065055] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.065066] ACPI: SRAT 0x00000000DFEAA6F0 000108 (v02 AMD AGESA 00000001 AMD 00000001) [ 0.065076] ACPI: SSDT 0x00000000DFEAA800 001158 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.065087] ACPI: EINJ 0x00000000DFEAB960 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.065098] ACPI: BERT 0x00000000DFEABAF0 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.065109] ACPI: ERST 0x00000000DFEABB20 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.065120] ACPI: HEST 0x00000000DFEABD30 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.065126] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.065128] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c98] [ 0.065129] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.065130] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.065131] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.065132] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.065133] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.065135] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.065136] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.065137] ACPI: Reserving SRAT table memory at [mem 0xdfeaa6f0-0xdfeaa7f7] [ 0.065138] ACPI: Reserving SSDT table memory at [mem 0xdfeaa800-0xdfeab957] [ 0.065139] ACPI: Reserving EINJ table memory at [mem 0xdfeab960-0xdfeaba8f] [ 0.065140] ACPI: Reserving BERT table memory at [mem 0xdfeabaf0-0xdfeabb1f] [ 0.065141] ACPI: Reserving ERST table memory at [mem 0xdfeabb20-0xdfeabd2f] [ 0.065143] ACPI: Reserving HEST table memory at [mem 0xdfeabd30-0xdfeabdd7] [ 0.065189] Setting APIC routing to Xen PV. [ 0.067279] Zone ranges: [ 0.067281] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.067284] DMA32 [mem 0x0000000001000000-0x0000000020069fff] [ 0.067287] Normal empty [ 0.067288] Movable zone start for each node [ 0.067289] Early memory node ranges [ 0.067289] node 0: [mem 0x0000000000001000-0x0000000000095fff] [ 0.067291] node 0: [mem 0x0000000000100000-0x0000000020069fff] [ 0.067295] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020069fff] [ 0.067308] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.067439] On node 0, zone DMA: 106 pages in unavailable ranges [ 0.073152] On node 0, zone DMA32: 32662 pages in unavailable ranges [ 0.073173] p2m virtual area at (____ptrval____), size is 40000000 [ 0.361946] Remapped 106 page(s) [ 0.362463] ACPI: PM-Timer IO Port: 0x808 [ 0.362525] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.362529] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.362556] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.362564] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.362577] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.362583] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.362608] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.362613] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.362644] smpboot: Allowing 6 CPUs, 0 hotplug CPUs [ 0.362666] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.362669] PM: hibernation: Registered nosave memory: [mem 0x00096000-0x000fffff] [ 0.362673] [mem 0x2006a000-0xdfe9dfff] available for PCI devices [ 0.362677] Booting kernel on Xen [ 0.362678] Xen version: 4.18.3-pre (preserve-AD) [ 0.362684] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.368317] setup_percpu: NR_CPUS:64 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1 [ 0.369506] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.369518] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.369523] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.369627] xen: PV spinlocks enabled [ 0.369633] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.369642] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.369646] Kernel command line: placeholder root=/dev/mapper/rimava1--vg-root ro console=hvc0 [ 0.369736] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.369794] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.369919] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.370192] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.370198] software IO TLB: area num 8. [ 0.508366] Memory: 390388K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1576K init, 1296K bss, 133644K reserved, 0K cma-reserved) [ 0.508522] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.511468] Dynamic Preempt: voluntary [ 0.511562] rcu: Preemptible hierarchical RCU implementation. [ 0.511564] rcu: RCU event tracing is enabled. [ 0.511565] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.511568] Trampoline variant of Tasks RCU enabled. [ 0.511570] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.511572] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.517384] NR_IRQS: 4352, nr_irqs: 1016, preallocated irqs: 16 [ 0.517532] xen:events: Using FIFO-based ABI [ 0.517569] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.517576] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.517580] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.517588] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.517594] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.517598] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.517603] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.517608] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.517613] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.517617] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.517623] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.517628] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.517632] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.517637] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.517642] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.517659] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.523676] Console: colour VGA+ 80x25 [ 0.535954] printk: console [tty0] enabled [ 0.536562] printk: console [hvc0] enabled [ 0.536679] ACPI: Core revision 20220331 [ 0.542224] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.542381] Xen: using vcpuop timer interface [ 0.542389] installing Xen timer for CPU 0 [ 0.542534] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cb39194e31, max_idle_ns: 440795279653 ns [ 0.542693] Calibrating delay loop (skipped), value calculated using timer frequency.. 6202.32 BogoMIPS (lpj=3101162) [ 0.542961] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.543072] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.543200] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.543348] Spectre V2 : Mitigation: Retpolines [ 0.543450] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.543699] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.543810] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.543920] RETBleed: Mitigation: untrained return thunk [ 0.544027] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.544173] Speculative Store Bypass: Vulnerable [ 0.544303] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.544445] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.544565] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.544677] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.544694] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.566020] Freeing SMP alternatives memory: 40K [ 0.566168] pid_max: default: 32768 minimum: 301 [ 0.566322] LSM: Security Framework initializing [ 0.566455] SELinux: Initializing. [ 0.566639] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.566697] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.567835] cpu 0 spinlock event irq 57 [ 0.567950] VPMU disabled by hypervisor. [ 0.568320] cblist_init_generic: Setting adjustable number of callback queues. [ 0.568459] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.568595] Performance Events: PMU not available due to virtualization, using software events only. [ 0.568694] signal: max sigframe size: 1776 [ 0.568832] rcu: Hierarchical SRCU implementation. [ 0.568935] rcu: Max phase no-delay instances is 400. [ 0.569452] smp: Bringing up secondary CPUs ... [ 0.569782] installing Xen timer for CPU 1 [ 0.571026] cpu 1 spinlock event irq 67 [ 0.571881] installing Xen timer for CPU 2 [ 0.573162] cpu 2 spinlock event irq 73 [ 0.573882] installing Xen timer for CPU 3 [ 0.574209] cpu 3 spinlock event irq 79 [ 0.574782] installing Xen timer for CPU 4 [ 0.575152] cpu 4 spinlock event irq 85 [ 0.575152] installing Xen timer for CPU 5 [ 0.575932] cpu 5 spinlock event irq 91 [ 0.575932] smp: Brought up 1 node, 6 CPUs [ 0.576033] smpboot: Max logical packages: 1 [ 0.576913] devtmpfs: initialized [ 0.576913] x86/mm: Memory block size: 128MB [ 0.577936] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.577943] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.578103] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.578408] PM: RTC time: 15:36:31, date: 2024-06-26 [ 0.578989] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.579139] xen:grant_table: Grant tables using version 1 layout [ 0.579306] Grant table initialized [ 0.579645] audit: initializing netlink subsys (disabled) [ 0.579747] audit: type=2000 audit(1719416191.577:1): state=initialized audit_enabled=0 res=1 [ 0.581001] thermal_sys: Registered thermal governor 'step_wise' [ 0.581020] thermal_sys: Registered thermal governor 'user_space' [ 0.584676] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.585510] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 1.317667] PCI: Using configuration type 1 for base access [ 1.336174] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.338021] ACPI: Added _OSI(Module Device) [ 1.338397] ACPI: Added _OSI(Processor Device) [ 1.338727] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.339093] ACPI: Added _OSI(Processor Aggregator Device) [ 1.360842] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.361517] xen: registering gsi 9 triggering 0 polarity 1 [ 1.367727] ACPI: Interpreter enabled [ 1.367897] ACPI: PM: (supports S0 S1 S4 S5) [ 1.368002] ACPI: Using IOAPIC for interrupt routing [ 1.368179] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.368330] PCI: Using E820 reservations for host bridge windows [ 1.368620] ACPI: Enabled 4 GPEs in block 00 to 1F [ 1.378105] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.378227] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.378380] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 1.378492] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 1.378637] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 1.379018] PCI host bridge to bus 0000:00 [ 1.379121] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.379235] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.379372] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.379515] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 1.379656] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 1.379693] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.379852] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 [ 1.380356] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 [ 1.380824] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 1.381042] pci 0000:00:09.0: enabling Extended Tags [ 1.381255] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 1.381537] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 [ 1.381753] pci 0000:00:0a.0: enabling Extended Tags [ 1.382010] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 1.382309] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 1.382461] pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007] [ 1.382591] pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003] [ 1.382715] pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007] [ 1.382845] pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003] [ 1.382977] pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f] [ 1.383105] pci 0000:00:11.0: reg 0x24: [mem 0xfebfbc00-0xfebfbfff] [ 1.383485] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 1.383639] pci 0000:00:12.0: reg 0x10: [mem 0xfebf9000-0xfebf9fff] [ 1.383958] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 1.384110] pci 0000:00:12.1: reg 0x10: [mem 0xfebfa000-0xfebfafff] [ 1.384503] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 1.384660] pci 0000:00:12.2: reg 0x10: [mem 0xfebfb800-0xfebfb8ff] [ 1.384911] pci 0000:00:12.2: supports D1 D2 [ 1.385014] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 1.385275] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 1.385425] pci 0000:00:13.0: reg 0x10: [mem 0xfebf7000-0xfebf7fff] [ 1.385796] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 1.385954] pci 0000:00:13.1: reg 0x10: [mem 0xfebf8000-0xfebf8fff] [ 1.386342] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 1.386494] pci 0000:00:13.2: reg 0x10: [mem 0xfebfb400-0xfebfb4ff] [ 1.386494] pci 0000:00:13.2: supports D1 D2 [ 1.386494] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 1.386494] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 1.386676] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 1.386689] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007] [ 1.386689] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003] [ 1.386689] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007] [ 1.386689] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003] [ 1.386689] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f] [ 1.386689] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 1.386689] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 1.387693] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 1.387807] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 1.388116] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 1.388561] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 1.388894] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 1.389055] pci 0000:00:14.5: reg 0x10: [mem 0xfebf6000-0xfebf6fff] [ 1.389449] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 [ 1.389821] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 [ 1.390097] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 [ 1.390399] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 [ 1.390729] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 [ 1.391070] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 [ 1.391555] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 [ 1.391746] pci 0000:01:00.0: reg 0x10: [mem 0xfe9e0000-0xfe9fffff] [ 1.391916] pci 0000:01:00.0: reg 0x18: [io 0xd800-0xd81f] [ 1.392054] pci 0000:01:00.0: reg 0x1c: [mem 0xfe9dc000-0xfe9dffff] [ 1.392442] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 1.395749] pci 0000:00:09.0: PCI bridge to [bus 01] [ 1.395873] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 1.395988] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 1.396342] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 [ 1.396504] pci 0000:02:00.0: reg 0x10: [mem 0xfeae0000-0xfeafffff] [ 1.396668] pci 0000:02:00.0: reg 0x18: [io 0xe800-0xe81f] [ 1.396720] pci 0000:02:00.0: reg 0x1c: [mem 0xfeadc000-0xfeadffff] [ 1.397107] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 1.400766] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 1.400900] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 1.401033] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 1.401230] pci_bus 0000:03: extended config space not accessible [ 1.401434] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 [ 1.401591] pci 0000:03:04.0: reg 0x10: [mem 0xfc000000-0xfcffffff pref] [ 1.401718] pci 0000:03:04.0: reg 0x14: [mem 0xfdffc000-0xfdffffff] [ 1.401854] pci 0000:03:04.0: reg 0x18: [mem 0xfe000000-0xfe7fffff] [ 1.402106] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.402571] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 1.402699] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 1.402817] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 1.402960] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 1.403111] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 1.403256] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 1.403403] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 1.403551] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 1.403751] pci_bus 0000:00: on NUMA node 0 [ 1.404399] xen: registering gsi 13 triggering 1 polarity 0 [ 1.404919] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 1.405117] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 1.405344] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 1.405538] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 1.405739] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 1.405927] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 1.406124] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 1.406320] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 1.406606] xen:balloon: Initialising balloon driver [ 1.406855] iommu: Default domain type: Translated [ 1.407002] iommu: DMA domain TLB invalidation policy: lazy mode [ 1.407247] SCSI subsystem initialized [ 1.407775] libata version 3.00 loaded. [ 1.407775] ACPI: bus type USB registered [ 1.407877] usbcore: registered new interface driver usbfs [ 1.407992] usbcore: registered new interface driver hub [ 1.408107] usbcore: registered new device driver usb [ 1.408236] pps_core: LinuxPPS API ver. 1 registered [ 1.408338] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.408487] PTP clock support registered [ 1.409089] Advanced Linux Sound Architecture Driver Initialized. [ 1.409477] NetLabel: Initializing [ 1.409694] NetLabel: domain hash size = 128 [ 1.409797] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.409924] NetLabel: unlabeled traffic allowed by default [ 1.410759] PCI: Using ACPI for IRQ routing [ 1.436290] PCI: pci_cache_line_size set to 64 bytes [ 1.436485] e820: reserve RAM buffer [mem 0x00096000-0x0009ffff] [ 1.436492] e820: reserve RAM buffer [mem 0x2006a000-0x23ffffff] [ 1.436756] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 1.436880] pci 0000:03:04.0: vgaarb: bridge control possible [ 1.436987] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.437139] vgaarb: loaded [ 1.438637] clocksource: Switched to clocksource tsc-early [ 1.439624] VFS: Disk quotas dquot_6.6.0 [ 1.440373] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.440785] hugetlbfs: disabling because there are no supported hugepage sizes [ 1.442514] pnp: PnP ACPI init [ 1.443044] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 1.443301] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 1.444145] xen: registering gsi 8 triggering 1 polarity 0 [ 1.444909] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 1.445268] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.445383] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.445956] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 1.446089] system 00:05: [io 0x0550-0x0551] has been reserved [ 1.446202] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 1.446314] system 00:05: [io 0x040b] has been reserved [ 1.446421] system 00:05: [io 0x04d6] has been reserved [ 1.446570] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 1.446682] system 00:05: [io 0x0c14] has been reserved [ 1.446843] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 1.446957] system 00:05: [io 0x0c52] has been reserved [ 1.447066] system 00:05: [io 0x0c6c] has been reserved [ 1.447175] system 00:05: [io 0x0c6f] has been reserved [ 1.447284] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 1.447395] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 1.447508] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 1.447627] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 1.447749] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 1.447859] system 00:05: [io 0x0800-0x089f] has been reserved [ 1.447999] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 1.448107] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 1.448216] system 00:05: [io 0x0900-0x090f] has been reserved [ 1.448323] system 00:05: [io 0x0910-0x091f] has been reserved [ 1.448432] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 1.448541] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 1.448652] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 1.448775] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 1.449188] xen: registering gsi 4 triggering 1 polarity 0 [ 1.449192] Already setup the GSI :4 [ 1.449298] pnp 00:06: [dma 0 disabled] [ 1.449629] xen: registering gsi 3 triggering 1 polarity 0 [ 1.449636] pnp 00:07: [dma 0 disabled] [ 1.449857] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 1.450280] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 1.450468] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 1.450582] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 1.450710] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 1.450856] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 1.451150] pnp: PnP ACPI: found 10 devices [ 1.476320] PM-Timer failed consistency check (0xffffff) - aborting. [ 1.476571] NET: Registered PF_INET protocol family [ 1.476925] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.477907] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.478062] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.478208] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 1.478368] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.478597] TCP: Hash tables configured (established 4096 bind 4096) [ 1.478828] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.478947] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.479115] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.479837] RPC: Registered named UNIX socket transport module. [ 1.479980] RPC: Registered udp transport module. [ 1.480085] RPC: Registered tcp transport module. [ 1.480189] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.481082] pci 0000:00:09.0: PCI bridge to [bus 01] [ 1.481209] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 1.481329] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 1.481458] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 1.481565] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 1.481682] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 1.481856] pci 0000:00:14.4: PCI bridge to [bus 03] [ 1.481973] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 1.482091] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 1.482249] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.482360] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.482473] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.482598] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 1.482756] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 1.482875] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 1.482983] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 1.483093] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 1.483201] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 1.483313] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 1.483422] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 1.483535] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 1.483644] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 1.483762] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.483914] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 1.484027] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 1.484365] xen: registering gsi 16 triggering 0 polarity 1 [ 1.484425] xen: --> pirq=16 -> irq=16 (gsi=16) [ 2.135629] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x720 took 636116 usecs [ 2.135978] xen: registering gsi 16 triggering 0 polarity 1 [ 2.135992] Already setup the GSI :16 [ 2.160995] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x720 took 24493 usecs [ 2.161288] xen: registering gsi 17 triggering 0 polarity 1 [ 2.161352] xen: --> pirq=17 -> irq=17 (gsi=17) [ 2.161592] xen: registering gsi 18 triggering 0 polarity 1 [ 2.161619] xen: --> pirq=18 -> irq=18 (gsi=18) [ 2.186391] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x720 took 24256 usecs [ 2.186949] xen: registering gsi 18 triggering 0 polarity 1 [ 2.186962] Already setup the GSI :18 [ 2.212448] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x720 took 24939 usecs [ 2.212919] xen: registering gsi 19 triggering 0 polarity 1 [ 2.212970] xen: --> pirq=19 -> irq=19 (gsi=19) [ 2.213188] xen: registering gsi 18 triggering 0 polarity 1 [ 2.213193] Already setup the GSI :18 [ 2.237995] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x720 took 24282 usecs [ 2.238231] PCI: CLS 64 bytes, default 64 [ 2.238356] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.238604] software IO TLB: mapped [mem 0x000000001b200000-0x000000001f200000] (64MB) [ 2.238891] kvm: no hardware support for 'kvm_intel' [ 2.238989] Unpacking initramfs... [ 2.239005] has_svm: svm not available [ 2.239008] kvm: no hardware support for 'kvm_amd' [ 2.239015] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cb39194e31, max_idle_ns: 440795279653 ns [ 2.239769] clocksource: Switched to clocksource tsc [ 2.249697] Initialise system trusted keyrings [ 2.250249] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 2.253421] NFS: Registering the id_resolver key type [ 2.253558] Key type id_resolver registered [ 2.253677] Key type id_legacy registered [ 2.254016] 9p: Installing v9fs 9p2000 file system support [ 2.266844] Key type asymmetric registered [ 2.267019] Asymmetric key parser 'x509' registered [ 2.267236] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.267423] io scheduler mq-deadline registered [ 2.267549] io scheduler kyber registered [ 2.269292] xen: registering gsi 53 triggering 0 polarity 1 [ 2.269359] xen: --> pirq=53 -> irq=53 (gsi=53) [ 2.269686] xen: registering gsi 54 triggering 0 polarity 1 [ 2.269703] xen: --> pirq=54 -> irq=54 (gsi=54) [ 2.270135] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.270327] ACPI: button: Power Button [PWRB] [ 2.270478] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.270887] ACPI: button: Power Button [PWRF] [ 2.273975] ACPI: \_PR_.P001: Found 2 idle states [ 2.274273] ACPI: \_PR_.P002: Found 2 idle states [ 2.274425] ACPI: \_PR_.P003: Found 2 idle states [ 2.274576] ACPI: \_PR_.P004: Found 2 idle states [ 2.274719] ACPI: \_PR_.P005: Found 2 idle states [ 2.274909] ACPI: \_PR_.P006: Found 2 idle states [ 2.276132] xen:xen_evtchn: Event-channel device installed [ 2.277476] xen_pciback: backend is vpci [ 2.281209] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.282826] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.287599] hpet_acpi_add: no address or irqs in _CRS [ 2.288682] Non-volatile memory driver v1.3 [ 2.289237] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 2.311743] loop: module loaded [ 2.334668] ahci 0000:00:11.0: version 3.0 [ 2.334881] xen: registering gsi 22 triggering 0 polarity 1 [ 2.334922] xen: --> pirq=22 -> irq=22 (gsi=22) [ 2.335122] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 2.335285] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 2.337559] scsi host0: ahci [ 2.339005] scsi host1: ahci [ 2.339971] scsi host2: ahci [ 2.340867] scsi host3: ahci [ 2.342020] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 [ 2.342593] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 [ 2.343162] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 [ 2.343658] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 [ 2.345184] tun: Universal TUN/TAP device driver, 1.6 [ 2.345659] e100: Intel(R) PRO/100 Network Driver [ 2.345764] e100: Copyright(c) 1999-2006 Intel Corporation [ 2.345923] sky2: driver version 1.30 [ 2.346097] xen_netfront: Initialising Xen virtual ethernet driver [ 2.346530] xen: registering gsi 17 triggering 0 polarity 1 [ 2.346541] Already setup the GSI :17 [ 2.346716] ehci-pci 0000:00:12.2: EHCI Host Controller [ 2.346968] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 2.347131] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.347338] ehci-pci 0000:00:12.2: debug port 1 [ 2.347584] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 2.354078] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.354337] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 2.354484] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.354627] usb usb1: Product: EHCI Host Controller [ 2.354731] usb usb1: Manufacturer: Linux 6.1.95+ ehci_hcd [ 2.356359] usb usb1: SerialNumber: 0000:00:12.2 [ 2.356725] hub 1-0:1.0: USB hub found [ 2.356838] hub 1-0:1.0: 6 ports detected [ 2.357417] xen: registering gsi 19 triggering 0 polarity 1 [ 2.357429] Already setup the GSI :19 [ 2.357605] ehci-pci 0000:00:13.2: EHCI Host Controller [ 2.357807] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 2.357956] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.358131] ehci-pci 0000:00:13.2: debug port 1 [ 2.358409] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 2.365094] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.365344] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 2.365493] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.365634] usb usb2: Product: EHCI Host Controller [ 2.365738] usb usb2: Manufacturer: Linux 6.1.95+ ehci_hcd [ 2.365845] usb usb2: SerialNumber: 0000:00:13.2 [ 2.366258] hub 2-0:1.0: USB hub found [ 2.366373] hub 2-0:1.0: 6 ports detected [ 2.366976] xen: registering gsi 16 triggering 0 polarity 1 [ 2.366989] Already setup the GSI :16 [ 2.367170] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 2.367359] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 2.367606] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 2.423205] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 2.423428] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.423570] usb usb3: Product: OHCI PCI host controller [ 2.423677] usb usb3: Manufacturer: Linux 6.1.95+ ohci_hcd [ 2.423783] usb usb3: SerialNumber: 0000:00:12.0 [ 2.424267] hub 3-0:1.0: USB hub found [ 2.424385] hub 3-0:1.0: 3 ports detected [ 2.424894] xen: registering gsi 16 triggering 0 polarity 1 [ 2.424904] Already setup the GSI :16 [ 2.425080] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 2.425280] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 2.425488] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 2.481207] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 2.481393] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.481544] usb usb4: Product: OHCI PCI host controller [ 2.481650] usb usb4: Manufacturer: Linux 6.1.95+ ohci_hcd [ 2.481756] usb usb4: SerialNumber: 0000:00:12.1 [ 2.482237] hub 4-0:1.0: USB hub found [ 2.482352] hub 4-0:1.0: 3 ports detected [ 2.482922] xen: registering gsi 18 triggering 0 polarity 1 [ 2.482932] Already setup the GSI :18 [ 2.483109] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.483306] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 2.483549] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 2.539219] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 2.539404] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.539553] usb usb5: Product: OHCI PCI host controller [ 2.539660] usb usb5: Manufacturer: Linux 6.1.95+ ohci_hcd [ 2.539768] usb usb5: SerialNumber: 0000:00:13.0 [ 2.540373] hub 5-0:1.0: USB hub found [ 2.540505] hub 5-0:1.0: 3 ports detected [ 2.541078] xen: registering gsi 18 triggering 0 polarity 1 [ 2.541087] Already setup the GSI :18 [ 2.541267] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 2.541492] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 2.542121] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 2.556239] Freeing initrd memory: 19960K [ 2.598188] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 2.598340] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.598477] usb usb6: Product: OHCI PCI host controller [ 2.598580] usb usb6: Manufacturer: Linux 6.1.95+ ohci_hcd [ 2.598683] usb usb6: SerialNumber: 0000:00:13.1 [ 2.598997] hub 6-0:1.0: USB hub found [ 2.599125] hub 6-0:1.0: 3 ports detected [ 2.599541] xen: registering gsi 18 triggering 0 polarity 1 [ 2.599548] Already setup the GSI :18 [ 2.599687] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.599879] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.600072] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 2.652838] ata3: SATA link down (SStatus 0 SControl 300) [ 2.653050] ata4: SATA link down (SStatus 0 SControl 300) [ 2.656171] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 2.656319] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.656459] usb usb7: Product: OHCI PCI host controller [ 2.656560] usb usb7: Manufacturer: Linux 6.1.95+ ohci_hcd [ 2.656663] usb usb7: SerialNumber: 0000:00:14.5 [ 2.656908] hub 7-0:1.0: USB hub found [ 2.657036] hub 7-0:1.0: 2 ports detected [ 2.657380] usbcore: registered new interface driver usblp [ 2.657510] usbcore: registered new interface driver usb-storage [ 2.657649] i8042: PNP: No PS/2 controller found. [ 2.657750] i8042: Probing ports directly. [ 2.660897] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.661003] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.661377] rtc_cmos 00:02: RTC can wake from S4 [ 2.661848] rtc_cmos 00:02: registered as rtc0 [ 2.661988] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 2.662165] device-mapper: uevent: version 1.0.3 [ 2.662386] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 2.662599] hid: raw HID events driver (C) Jiri Kosina [ 2.662906] usbcore: registered new interface driver usbhid [ 2.663010] usbhid: USB HID core driver [ 2.663494] Initializing XFRM netlink socket [ 2.663710] NET: Registered PF_INET6 protocol family [ 2.664261] Segment Routing with IPv6 [ 2.664374] In-situ OAM (IOAM) with IPv6 [ 2.664511] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.664790] NET: Registered PF_PACKET protocol family [ 2.664932] 9pnet: Installing 9P2000 support [ 2.665071] Key type dns_resolver registered [ 2.665172] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 2.665790] IPI shorthand broadcast: enabled [ 2.665917] sched_clock: Marking stable (2640722094, 25024618)->(2715770507, -50023795) [ 2.666438] registered taskstats version 1 [ 2.666538] Loading compiled-in X.509 certificates [ 2.668842] PM: Magic number: 12:127:640 [ 2.669003] printk: console [netcon0] enabled [ 2.669116] netconsole: network logging started [ 2.669298] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.678813] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.679200] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 2.679350] ALSA device list: [ 2.679445] No soundcards found. [ 2.680214] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 2.807091] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.807224] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.809419] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 2.809826] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.810377] ata2.00: ATAPI: ATAPI iHAS124 E, 4L07, max UDMA/100 [ 2.811248] ata2.00: configured for UDMA/100 [ 2.811412] ata1.00: configured for UDMA/133 [ 2.811723] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.812502] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.812609] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.812859] sd 0:0:0:0: [sda] Write Protect is off [ 2.812967] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.813026] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.813256] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.819134] scsi 1:0:0:0: CD-ROM ATAPI iHAS124 E 4L07 PQ: 0 ANSI: 5 [ 2.845552] sda: sda1 sda2 < sda5 > [ 2.845881] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.847090] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.861538] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.861690] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.889597] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.889702] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.890874] Freeing unused kernel image (initmem) memory: 1576K [ 2.890987] Write protecting the kernel read-only data: 22528k [ 2.901523] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 2.902675] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 3.007621] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 3.007771] Run /init as init process [ 3.007877] with arguments: [ 3.007879] /init [ 3.007880] placeholder [ 3.007881] with environment: [ 3.007882] HOME=/ [ 3.007883] TERM=linux [ 3.085917] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 3.086090] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.086204] usb 6-2: Product: Hermon USB hidmouse Device [ 3.086307] usb 6-2: Manufacturer: Winbond Electronics Corp [ 3.092398] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 3.092749] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 3.096369] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 3.149405] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 3.269739] e1000e: Intel(R) PRO/1000 Network Driver [ 3.269862] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.270197] xen: registering gsi 48 triggering 0 polarity 1 [ 3.270331] xen: --> pirq=48 -> irq=48 (gsi=48) [ 3.270527] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.313947] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 3.357887] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0a:48:f6 [ 3.358049] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.358238] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 3.358446] xen: registering gsi 47 triggering 0 polarity 1 [ 3.358469] xen: --> pirq=47 -> irq=47 (gsi=47) [ 3.358645] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.405123] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 3.452147] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0a:48:f7 [ 3.452296] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 3.452483] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 3.454406] e1000e 0000:01:00.0 enx0cc47a0a48f6: renamed from eth0 [ 3.463465] e1000e 0000:02:00.0 enx0cc47a0a48f7: renamed from eth1 [ 3.568047] random: crng init done [ 4.210396] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 4.215572] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.291747] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.840230] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.870648] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.937927] Adding 1949692k swap on /dev/mapper/rimava1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.527690] xenbr0: port 1(enx0cc47a0a48f6) entered blocking state [ 11.527832] xenbr0: port 1(enx0cc47a0a48f6) entered disabled state [ 11.528053] device enx0cc47a0a48f6 entered promiscuous mode [ 14.748103] e1000e 0000:01:00.0 enx0cc47a0a48f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 14.748580] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a0a48f6: link becomes ready [ 14.748743] xenbr0: port 1(enx0cc47a0a48f6) entered blocking state [ 14.748851] xenbr0: port 1(enx0cc47a0a48f6) entered forwarding state [ 14.749051] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready