[ 0.000000] Linux version 6.10.0-rc5+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Wed Jun 26 23:24:49 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/pinot0--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000f6000000-0x00000000f6003fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SML/H8SML, BIOS 3.5 11/25/2013 [ 0.000000] DMI: Memory slots populated: 2/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000011] Xen PV: Detected 4 vCPUS [ 0.038656] tsc: Fast TSC calibration using PIT [ 0.038657] tsc: Detected 2800.037 MHz processor [ 0.038659] tsc: Detected 2799.984 MHz TSC [ 0.038875] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.038879] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.038886] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.038889] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.038891] MTRRs set to read-only [ 0.038893] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.064715] RAMDISK: [mem 0x04000000-0x053b7fff] [ 0.064727] ACPI: Early table checksum verification disabled [ 0.065487] ACPI: RSDP 0x00000000000FA1C0 000024 (v02 ACPIAM) [ 0.065496] ACPI: XSDT 0x00000000DFEA0100 00007C (v01 SMCI 20131125 MSFT 00000097) [ 0.065522] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.065555] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20240322/tbfadt-560) [ 0.065566] ACPI: DSDT 0x00000000DFEA0600 00562B (v01 1CF11 1CF11000 00000000 INTL 20051117) [ 0.065577] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.065586] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.065596] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.065607] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.065618] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.065628] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.065639] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.065649] ACPI: SSDT 0x00000000DFEAA6F0 000B9C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.065659] ACPI: EINJ 0x00000000DFEAB290 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.065670] ACPI: BERT 0x00000000DFEAB420 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.065680] ACPI: ERST 0x00000000DFEAB450 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.065690] ACPI: HEST 0x00000000DFEAB660 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.065696] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.065698] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c2a] [ 0.065700] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.065701] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.065702] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.065704] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.065705] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.065706] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.065707] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.065708] ACPI: Reserving SSDT table memory at [mem 0xdfeaa6f0-0xdfeab28b] [ 0.065710] ACPI: Reserving EINJ table memory at [mem 0xdfeab290-0xdfeab3bf] [ 0.065711] ACPI: Reserving BERT table memory at [mem 0xdfeab420-0xdfeab44f] [ 0.065712] ACPI: Reserving ERST table memory at [mem 0xdfeab450-0xdfeab65f] [ 0.065713] ACPI: Reserving HEST table memory at [mem 0xdfeab660-0xdfeab707] [ 0.065803] APIC: Switched APIC routing to: Xen PV [ 0.068265] Zone ranges: [ 0.068266] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.068268] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.068271] Normal empty [ 0.068272] Movable zone start for each node [ 0.068273] Early memory node ranges [ 0.068273] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.068275] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.068278] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.068285] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.068349] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.070671] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.070677] p2m virtual area at (____ptrval____), size is 40000000 [ 0.290813] Remapped 102 page(s) [ 0.291351] ACPI: PM-Timer IO Port: 0x808 [ 0.291377] CPU topo: CPU limit of 4 reached. Ignoring further CPUs [ 0.291401] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.291404] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.291424] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.291432] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.291442] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.291446] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.291465] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.291469] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.291479] CPU topo: Max. logical packages: 1 [ 0.291481] CPU topo: Max. logical dies: 1 [ 0.291482] CPU topo: Max. dies per package: 1 [ 0.291487] CPU topo: Max. threads per core: 1 [ 0.291489] CPU topo: Num. cores per package: 4 [ 0.291490] CPU topo: Num. threads per package: 4 [ 0.291490] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.291492] CPU topo: Rejected CPUs 4 [ 0.291507] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.291510] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.291511] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.291513] [mem 0x20066000-0xdfe9dfff] available for PCI devices [ 0.291523] Booting kernel on Xen [ 0.291524] Xen version: 4.19-unstable (preserve-AD) [ 0.291527] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.297800] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.298364] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u524288 [ 0.298373] pcpu-alloc: s194408 r8192 d30872 u524288 alloc=1*2097152 [ 0.298376] pcpu-alloc: [0] 0 1 2 3 [ 0.298428] xen: PV spinlocks enabled [ 0.298432] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.298435] Kernel command line: placeholder root=/dev/mapper/pinot0--vg-root ro console=hvc0 [ 0.298493] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.298612] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.298669] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.298864] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.298868] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.298870] software IO TLB: area num 4. [ 0.368957] Memory: 386444K/524284K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 137588K reserved, 0K cma-reserved) [ 0.369063] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.371634] Dynamic Preempt: voluntary [ 0.371733] rcu: Preemptible hierarchical RCU implementation. [ 0.371734] rcu: RCU event tracing is enabled. [ 0.371735] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.371737] Trampoline variant of Tasks RCU enabled. [ 0.371738] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.371739] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.371755] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.378505] NR_IRQS: 4352, nr_irqs: 1000, preallocated irqs: 16 [ 0.378633] xen:events: Using FIFO-based ABI [ 0.378663] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.378669] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.378675] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.378684] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.378690] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.378696] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.378701] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.378707] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.378713] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.378718] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.378724] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.378730] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.378735] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.378741] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.378747] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.378756] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.384849] Console: colour VGA+ 80x25 [ 0.384853] printk: legacy console [tty0] enabled [ 0.398437] printk: legacy console [hvc0] enabled [ 0.402583] ACPI: Core revision 20240322 [ 0.407867] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.408323] Xen: using vcpuop timer interface [ 0.408351] installing Xen timer for CPU 0 [ 0.409338] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c31c5631, max_idle_ns: 440795301911 ns [ 0.409824] Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.96 BogoMIPS (lpj=2799984) [ 0.410367] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.411964] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.412268] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.412593] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.412754] Spectre V2 : Mitigation: Retpolines [ 0.413048] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.413392] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.413694] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.414018] RETBleed: Mitigation: untrained return thunk [ 0.414308] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.414715] Speculative Store Bypass: Vulnerable [ 0.415077] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.415286] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.415395] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.415505] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.415613] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.437823] Freeing SMP alternatives memory: 40K [ 0.437943] pid_max: default: 32768 minimum: 301 [ 0.438074] LSM: initializing lsm=capability,selinux [ 0.438185] SELinux: Initializing. [ 0.438320] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.438464] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.439853] cpu 0 spinlock event irq 57 [ 0.439966] VPMU disabled by hypervisor. [ 0.440464] Performance Events: PMU not available due to virtualization, using software events only. [ 0.440632] signal: max sigframe size: 1776 [ 0.440784] rcu: Hierarchical SRCU implementation. [ 0.440888] rcu: Max phase no-delay instances is 400. [ 0.446513] smp: Bringing up secondary CPUs ... [ 0.446819] installing Xen timer for CPU 1 [ 0.447200] installing Xen timer for CPU 2 [ 0.447556] installing Xen timer for CPU 3 [ 0.031965] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0011 [ 0.447797] cpu 1 spinlock event irq 77 [ 0.031965] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0012 [ 0.448056] cpu 2 spinlock event irq 78 [ 0.031965] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0013 [ 0.448776] cpu 3 spinlock event irq 79 [ 0.449059] smp: Brought up 1 node, 4 CPUs [ 0.449775] devtmpfs: initialized [ 0.449891] x86/mm: Memory block size: 128MB [ 0.450476] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.450792] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.450944] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.451161] PM: RTC time: 02:16:06, date: 2024-06-27 [ 0.451466] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.451600] xen:grant_table: Grant tables using version 1 layout [ 0.451732] Grant table initialized [ 0.452110] audit: initializing netlink subsys (disabled) [ 0.452255] audit: type=2000 audit(1719454567.289:1): state=initialized audit_enabled=0 res=1 [ 0.452255] thermal_sys: Registered thermal governor 'step_wise' [ 0.452255] thermal_sys: Registered thermal governor 'user_space' [ 0.452971] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.453253] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.537761] PCI: Using configuration type 1 for base access [ 0.537941] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.537941] ACPI: Added _OSI(Module Device) [ 0.538731] ACPI: Added _OSI(Processor Device) [ 0.538834] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.538936] ACPI: Added _OSI(Processor Aggregator Device) [ 0.543811] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.544385] xen: registering gsi 9 triggering 0 polarity 1 [ 0.544854] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.545274] ACPI: Interpreter enabled [ 0.545751] ACPI: PM: (supports S0 S1 S4 S5) [ 0.545860] ACPI: Using IOAPIC for interrupt routing [ 0.546012] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.546166] PCI: Using E820 reservations for host bridge windows [ 0.546467] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.557480] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.557629] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.557734] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.557852] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.558001] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.558440] PCI host bridge to bus 0000:00 [ 0.558549] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.558668] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.558729] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.558880] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.559070] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.559219] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.559387] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.560034] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.560629] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.560819] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.560947] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.561092] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.561275] pci 0000:00:09.0: enabling Extended Tags [ 0.561533] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.561868] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.562107] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.562234] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.562377] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.562557] pci 0000:00:0a.0: enabling Extended Tags [ 0.562814] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.563155] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f conventional PCI endpoint [ 0.563359] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.563522] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.563660] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.563757] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.563895] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.564032] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.564212] pci 0000:00:11.0: set SATA to AHCI mode [ 0.564573] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.564781] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.565217] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.565421] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.565896] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.566099] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.566482] pci 0000:00:12.2: supports D1 D2 [ 0.566589] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.566886] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.567117] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.567547] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.567752] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.568204] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.568424] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.568819] pci 0000:00:13.2: supports D1 D2 [ 0.568926] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.569241] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.569892] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.570095] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.570233] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.570373] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.570510] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.570646] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.570794] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.570912] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.571026] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.571149] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.571486] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.572063] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.572319] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.572456] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.572601] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.572886] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.573112] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.573563] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.573968] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.574320] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.574675] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.574977] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.575337] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.575883] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.576092] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.576270] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.576413] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.576864] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.577307] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.577631] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.577790] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.577990] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.578133] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.578546] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.579010] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.579229] pci_bus 0000:03: extended config space not accessible [ 0.579405] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.579614] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.579759] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.579903] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.580190] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.580662] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.580754] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.580906] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.581729] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.581884] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.582039] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.582274] pci_bus 0000:00: on NUMA node 0 [ 0.582774] xen: registering gsi 13 triggering 1 polarity 0 [ 0.583243] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.583433] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.583620] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.583806] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.583992] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.584205] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.584393] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.584578] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.584803] xen:balloon: Initialising balloon driver [ 0.584931] iommu: Default domain type: Translated [ 0.584933] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.585146] SCSI subsystem initialized [ 0.585264] libata version 3.00 loaded. [ 0.585264] ACPI: bus type USB registered [ 0.585750] usbcore: registered new interface driver usbfs [ 0.585870] usbcore: registered new interface driver hub [ 0.585990] usbcore: registered new device driver usb [ 0.586122] pps_core: LinuxPPS API ver. 1 registered [ 0.586232] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.586389] PTP clock support registered [ 0.586749] Advanced Linux Sound Architecture Driver Initialized. [ 0.587178] NetLabel: Initializing [ 0.587283] NetLabel: domain hash size = 128 [ 0.587391] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.587525] NetLabel: unlabeled traffic allowed by default [ 0.587747] PCI: Using ACPI for IRQ routing [ 0.619275] PCI: pci_cache_line_size set to 64 bytes [ 0.619472] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.619475] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.619499] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.619499] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.619499] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.619729] vgaarb: loaded [ 0.620844] clocksource: Switched to clocksource tsc-early [ 0.621049] VFS: Disk quotas dquot_6.6.0 [ 0.621163] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.621318] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.621506] pnp: PnP ACPI init [ 0.621762] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.622043] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.622488] xen: registering gsi 8 triggering 1 polarity 0 [ 0.622622] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.623015] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.623136] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.623626] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.623766] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.623882] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.623996] system 00:05: [io 0x040b] has been reserved [ 0.624108] system 00:05: [io 0x04d6] has been reserved [ 0.624219] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.624334] system 00:05: [io 0x0c14] has been reserved [ 0.624445] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.624559] system 00:05: [io 0x0c52] has been reserved [ 0.624669] system 00:05: [io 0x0c6c] has been reserved [ 0.624800] system 00:05: [io 0x0c6f] has been reserved [ 0.624939] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.625053] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.625167] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.625281] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.625394] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.625508] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.625622] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.625744] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.625858] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.625972] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.626087] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.626251] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.626369] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.626486] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.626869] xen: registering gsi 4 triggering 1 polarity 0 [ 0.626874] Already setup the GSI :4 [ 0.626979] pnp 00:06: [dma 0 disabled] [ 0.627288] xen: registering gsi 3 triggering 1 polarity 0 [ 0.627299] pnp 00:07: [dma 0 disabled] [ 0.627460] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.627870] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.628063] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.628183] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.628301] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.628418] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.628720] pnp: PnP ACPI: found 10 devices [ 0.650910] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.651055] NET: Registered PF_INET protocol family [ 0.651226] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.651630] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.651795] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.651970] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.652147] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.652316] TCP: Hash tables configured (established 4096 bind 4096) [ 0.652457] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.652578] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.652746] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.653023] RPC: Registered named UNIX socket transport module. [ 0.653138] RPC: Registered udp transport module. [ 0.653245] RPC: Registered tcp transport module. [ 0.653353] RPC: Registered tcp-with-tls transport module. [ 0.653463] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.654102] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.654219] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.654368] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.654505] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.654618] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.654753] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.654892] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.655014] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.655139] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.655339] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.655480] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.655595] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.655712] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.655838] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.655955] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.656068] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.656182] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.656296] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.656411] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.656526] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.656707] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.656834] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.656949] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.657067] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.657183] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.657447] xen: registering gsi 16 triggering 0 polarity 1 [ 0.657473] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.320872] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 647942 usecs [ 1.321108] xen: registering gsi 16 triggering 0 polarity 1 [ 1.321118] Already setup the GSI :16 [ 1.344876] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 23268 usecs [ 1.345118] xen: registering gsi 17 triggering 0 polarity 1 [ 1.345163] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.345349] xen: registering gsi 18 triggering 0 polarity 1 [ 1.345371] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.368877] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 23031 usecs [ 1.369113] xen: registering gsi 18 triggering 0 polarity 1 [ 1.369121] Already setup the GSI :18 [ 1.392877] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 23264 usecs [ 1.393119] xen: registering gsi 19 triggering 0 polarity 1 [ 1.393159] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.393381] xen: registering gsi 18 triggering 0 polarity 1 [ 1.393385] Already setup the GSI :18 [ 1.417874] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 23975 usecs [ 1.418101] PCI: CLS 64 bytes, default 64 [ 1.418286] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.418402] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 1.418446] Unpacking initramfs... [ 1.418599] kvm_intel: VMX not supported by CPU 0 [ 1.418790] kvm_amd: SVM not supported by CPU 0 [ 1.418901] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c31c5631, max_idle_ns: 440795301911 ns [ 1.422904] clocksource: Switched to clocksource tsc [ 1.487784] Initialise system trusted keyrings [ 1.488024] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.488329] NFS: Registering the id_resolver key type [ 1.488443] Key type id_resolver registered [ 1.488543] Key type id_legacy registered [ 1.488749] 9p: Installing v9fs 9p2000 file system support [ 1.506181] Key type asymmetric registered [ 1.506286] Asymmetric key parser 'x509' registered [ 1.506411] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.506563] io scheduler mq-deadline registered [ 1.506666] io scheduler kyber registered [ 1.507437] xen: registering gsi 53 triggering 0 polarity 1 [ 1.507468] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.507743] xen: registering gsi 54 triggering 0 polarity 1 [ 1.507760] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.508115] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.508294] ACPI: button: Power Button [PWRB] [ 1.508477] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.508707] ACPI: button: Power Button [PWRF] [ 1.510930] ACPI: \_PR_.P001: Found 2 idle states [ 1.511198] ACPI: \_PR_.P002: Found 2 idle states [ 1.511348] ACPI: \_PR_.P003: Found 2 idle states [ 1.511511] ACPI: \_PR_.P004: Found 2 idle states [ 1.512119] xen:xen_evtchn: Event-channel device installed [ 1.512338] xen_pciback: backend is vpci [ 1.513118] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.513500] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.515794] hpet_acpi_add: no address or irqs in _CRS [ 1.515978] Non-volatile memory driver v1.3 [ 1.518335] loop: module loaded [ 1.524652] ahci 0000:00:11.0: version 3.0 [ 1.524758] xen: registering gsi 22 triggering 0 polarity 1 [ 1.524793] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.524938] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.525108] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.525246] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.526467] scsi host0: ahci [ 1.526793] scsi host1: ahci [ 1.527120] scsi host2: ahci [ 1.527466] scsi host3: ahci [ 1.527664] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 0 [ 1.527810] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 0 [ 1.527955] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 0 [ 1.528114] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 0 [ 1.528690] tun: Universal TUN/TAP device driver, 1.6 [ 1.528976] e100: Intel(R) PRO/100 Network Driver [ 1.529081] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.529202] sky2: driver version 1.30 [ 1.529357] xen_netfront: Initialising Xen virtual ethernet driver [ 1.529727] xen: registering gsi 16 triggering 0 polarity 1 [ 1.529735] Already setup the GSI :16 [ 1.529861] xen: registering gsi 17 triggering 0 polarity 1 [ 1.529867] Already setup the GSI :17 [ 1.529896] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.530211] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.530407] xen: registering gsi 19 triggering 0 polarity 1 [ 1.530415] Already setup the GSI :19 [ 1.530534] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.572941] Freeing initrd memory: 20192K [ 1.586260] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.586433] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.586573] usb usb1: Product: OHCI PCI host controller [ 1.586678] usb usb1: Manufacturer: Linux 6.10.0-rc5+ ohci_hcd [ 1.586786] usb usb1: SerialNumber: 0000:00:12.0 [ 1.587178] hub 1-0:1.0: USB hub found [ 1.587318] hub 1-0:1.0: 3 ports detected [ 1.587897] xen: registering gsi 16 triggering 0 polarity 1 [ 1.587906] Already setup the GSI :16 [ 1.587919] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.588223] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2 [ 1.588369] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.588577] ehci-pci 0000:00:12.2: debug port 1 [ 1.588823] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.595019] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.595196] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 1.595342] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.595521] usb usb2: Product: EHCI Host Controller [ 1.595624] usb usb2: Manufacturer: Linux 6.10.0-rc5+ ehci_hcd [ 1.595731] usb usb2: SerialNumber: 0000:00:12.2 [ 1.595996] hub 2-0:1.0: USB hub found [ 1.596139] hub 2-0:1.0: 6 ports detected [ 1.648068] hub 1-0:1.0: USB hub found [ 1.648200] hub 1-0:1.0: 3 ports detected [ 1.648450] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.648641] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 1.648785] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.648951] ehci-pci 0000:00:13.2: debug port 1 [ 1.649166] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 1.656023] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.656264] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 1.656418] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.656592] usb usb3: Product: EHCI Host Controller [ 1.656696] usb usb3: Manufacturer: Linux 6.10.0-rc5+ ehci_hcd [ 1.656803] usb usb3: SerialNumber: 0000:00:13.2 [ 1.657129] hub 3-0:1.0: USB hub found [ 1.657253] hub 3-0:1.0: 6 ports detected [ 1.657575] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.657863] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.658053] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 1.714272] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.714425] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.714592] usb usb4: Product: OHCI PCI host controller [ 1.714737] usb usb4: Manufacturer: Linux 6.10.0-rc5+ ohci_hcd [ 1.714844] usb usb4: SerialNumber: 0000:00:12.1 [ 1.715188] hub 4-0:1.0: USB hub found [ 1.715325] hub 4-0:1.0: 3 ports detected [ 1.715809] xen: registering gsi 18 triggering 0 polarity 1 [ 1.715816] Already setup the GSI :18 [ 1.715952] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.716239] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.716441] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 1.772213] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.772366] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.772507] usb usb5: Product: OHCI PCI host controller [ 1.772612] usb usb5: Manufacturer: Linux 6.10.0-rc5+ ohci_hcd [ 1.772722] usb usb5: SerialNumber: 0000:00:13.0 [ 1.773122] hub 5-0:1.0: USB hub found [ 1.773303] hub 5-0:1.0: 3 ports detected [ 1.773869] xen: registering gsi 18 triggering 0 polarity 1 [ 1.773875] Already setup the GSI :18 [ 1.774031] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.774244] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.774452] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 1.830254] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.830408] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.830548] usb usb6: Product: OHCI PCI host controller [ 1.830668] usb usb6: Manufacturer: Linux 6.10.0-rc5+ ohci_hcd [ 1.830775] usb usb6: SerialNumber: 0000:00:13.1 [ 1.831084] hub 6-0:1.0: USB hub found [ 1.831293] hub 6-0:1.0: 3 ports detected [ 1.831865] xen: registering gsi 18 triggering 0 polarity 1 [ 1.831872] Already setup the GSI :18 [ 1.832026] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.832246] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.832422] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 1.838969] ata4: SATA link down (SStatus 0 SControl 300) [ 1.839208] ata3: SATA link down (SStatus 0 SControl 300) [ 1.888274] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.888427] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.888567] usb usb7: Product: OHCI PCI host controller [ 1.888672] usb usb7: Manufacturer: Linux 6.10.0-rc5+ ohci_hcd [ 1.888780] usb usb7: SerialNumber: 0000:00:14.5 [ 1.889110] hub 7-0:1.0: USB hub found [ 1.889231] hub 7-0:1.0: 2 ports detected [ 1.889561] usbcore: registered new interface driver usblp [ 1.889692] usbcore: registered new interface driver usb-storage [ 1.889838] i8042: PNP: No PS/2 controller found. [ 1.889941] i8042: Probing ports directly. [ 1.893160] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.893270] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.893710] rtc_cmos 00:02: RTC can wake from S4 [ 1.894255] rtc_cmos 00:02: registered as rtc0 [ 1.894400] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 1.894554] device-mapper: uevent: version 1.0.3 [ 1.894742] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 1.894894] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.895152] hid: raw HID events driver (C) Jiri Kosina [ 1.895463] usbcore: registered new interface driver usbhid [ 1.895569] usbhid: USB HID core driver [ 1.896071] Initializing XFRM netlink socket [ 1.896207] NET: Registered PF_INET6 protocol family [ 1.896843] Segment Routing with IPv6 [ 1.896961] In-situ OAM (IOAM) with IPv6 [ 1.897115] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.897373] NET: Registered PF_PACKET protocol family [ 1.897503] 9pnet: Installing 9P2000 support [ 1.897626] Key type dns_resolver registered [ 1.897745] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.898281] IPI shorthand broadcast: enabled [ 1.902797] sched_clock: Marking stable (1871003648, 30965767)->(1907301470, -5332055) [ 1.903406] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 1.903739] registered taskstats version 1 [ 1.903840] Loading compiled-in X.509 certificates [ 1.906093] PM: Magic number: 12:956:258 [ 1.906297] printk: legacy console [netcon0] enabled [ 1.906428] netconsole: network logging started [ 1.906645] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.916829] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.917271] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 1.918088] ALSA device list: [ 1.918127] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 1.918195] No soundcards found. [ 1.993034] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.993195] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.993919] ata2.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133 [ 1.994488] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.995394] ata2.00: configured for UDMA/133 [ 1.995604] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 1.996079] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.997864] ata1.00: configured for UDMA/133 [ 1.998214] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 1.998747] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.998810] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.999067] sd 0:0:0:0: [sda] Write Protect is off [ 1.999192] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5 [ 1.999211] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.999412] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.999654] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.999777] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.999839] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.999930] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 2.000194] sd 1:0:0:0: [sdb] Write Protect is off [ 2.000316] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.000420] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.000663] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 2.019899] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.033828] sdb: sdb1 sdb2 < sdb5 > [ 2.034218] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.035797] Freeing unused kernel image (initmem) memory: 2680K [ 2.035956] Write protecting the kernel read-only data: 24576k [ 2.049140] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 2.164576] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.164728] Run /init as init process [ 2.164837] with arguments: [ 2.164838] /init [ 2.164840] placeholder [ 2.164841] with environment: [ 2.164843] HOME=/ [ 2.164844] TERM=linux [ 2.217005] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.381120] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.381282] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.381397] usb 6-2: Product: Hermon USB hidmouse Device [ 2.381503] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.387482] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.387850] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.391602] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.437963] e1000e: Intel(R) PRO/1000 Network Driver [ 2.438117] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.438351] xen: registering gsi 48 triggering 0 polarity 1 [ 2.438393] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.438671] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.445365] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.483793] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.527785] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e8:ac [ 2.527939] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.528170] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.528393] xen: registering gsi 47 triggering 0 polarity 1 [ 2.528423] xen: --> pirq=47 -> irq=47 (gsi=47) [ 2.528626] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.576030] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.592218] random: crng init done [ 2.622903] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e8:ad [ 2.623098] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.623291] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.625305] e1000e 0000:02:00.0 enx002590aee8ad: renamed from eth1 [ 2.625639] e1000e 0000:01:00.0 enx002590aee8ac: renamed from eth0 [ 3.379944] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.392802] EXT4-fs (dm-0): mounted filesystem cb7e2cbd-9eae-4770-83f1-f390d2763b65 ro with ordered data mode. Quota mode: none. [ 7.199924] EXT4-fs (dm-0): re-mounted cb7e2cbd-9eae-4770-83f1-f390d2763b65 r/w. Quota mode: none. [ 8.881809] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem [ 8.888871] EXT4-fs (sdb1): mounted filesystem aab38ab5-77e0-48e0-b5e6-a43cd7c689ab r/w with ordered data mode. Quota mode: none. [ 8.965422] Adding 1949692k swap on /dev/mapper/pinot0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 10.515138] xenbr0: port 1(enx002590aee8ac) entered blocking state [ 10.515317] xenbr0: port 1(enx002590aee8ac) entered disabled state [ 10.515434] e1000e 0000:01:00.0 enx002590aee8ac: entered allmulticast mode [ 10.515593] e1000e 0000:01:00.0 enx002590aee8ac: entered promiscuous mode [ 13.892018] e1000e 0000:01:00.0 enx002590aee8ac: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 13.892602] xenbr0: port 1(enx002590aee8ac) entered blocking state [ 13.892714] xenbr0: port 1(enx002590aee8ac) entered forwarding state