[ 0.000000] Linux version 6.10.0-rc5+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Wed Jun 26 23:24:49 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/italia1--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009afff] usable [ 0.000000] Xen: [mem 0x000000000009bc00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020064fff] usable [ 0.000000] Xen: [mem 0x00000000ab9ba000-0x00000000bba3afff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000bc60a000-0x00000000bc73ffff] reserved [ 0.000000] Xen: [mem 0x00000000beaee000-0x00000000beaf8fff] reserved [ 0.000000] Xen: [mem 0x00000000beb05000-0x00000000beb15fff] reserved [ 0.000000] Xen: [mem 0x00000000bed3a000-0x00000000beddffff] reserved [ 0.000000] Xen: [mem 0x00000000bede0000-0x00000000befdffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000befe0000-0x00000000beffefff] ACPI data [ 0.000000] Xen: [mem 0x00000000bf000000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed19000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed90fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Intel Corporation SandyBridge Platform/To be filled by O.E.M., BIOS S1200BT.86B.02.00.0042.050820141549 05/08/2014 [ 0.000000] DMI: Memory slots populated: 1/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000022] Xen PV: Detected 4 vCPUS [ 0.000483] tsc: Detected 3092.972 MHz processor [ 0.000899] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000902] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000908] last_pfn = 0x20065 max_arch_pfn = 0x400000000 [ 0.000911] MTRR map: 3 entries (0 fixed + 3 variable; max 20), built from 10 variable MTRRs [ 0.000912] MTRRs set to read-only [ 0.000915] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000951] Kernel/User page tables isolation: disabled on XEN PV. [ 0.024219] RAMDISK: [mem 0x04000000-0x053a4fff] [ 0.024227] ACPI: Early table checksum verification disabled [ 0.033883] ACPI: RSDP 0x00000000000F0410 000024 (v02 INTEL ) [ 0.033894] ACPI: XSDT 0x00000000BEFFDE18 0000BC (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033927] ACPI: FACP 0x00000000BEFFCA98 0000F4 (v04 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033966] ACPI: DSDT 0x00000000BEFEE018 00CE48 (v02 INTEL S1200BTS 00000000 INTL 20100331) [ 0.033982] ACPI: FACS 0x00000000BEFFDD40 000040 [ 0.033997] ACPI: APIC 0x00000000BEFFB018 000652 (v03 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034012] ACPI: SPMI 0x00000000BEFFEC18 000040 (v05 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034028] ACPI: MCFG 0x00000000BEFFEB98 00003C (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034043] ACPI: WDDT 0x00000000BEFFEF18 000040 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034058] ACPI: HPET 0x00000000BEFFEE98 000038 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034073] ACPI: SSDT 0x00000000BEFEB018 0010A8 (v02 INTEL S1200BTS 00001000 INTL 20100331) [ 0.034089] ACPI: BOOT 0x00000000BEFFEE18 000028 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034104] ACPI: SSDT 0x00000000BEFE7698 0005E0 (v02 INTEL S1200BTS 00003000 INTL 20100331) [ 0.034119] ACPI: SSDT 0x00000000BEFE6018 000A92 (v02 INTEL S1200BTS 00003000 INTL 20100331) [ 0.034134] ACPI: SSDT 0x00000000BEFEA598 00054D (v01 INTEL S1200BTS 00001000 INTL 20100331) [ 0.034149] ACPI: SSDT 0x00000000BEFFDB18 000069 (v01 INTEL S1200BTS 00001000 INTL 20100331) [ 0.034164] ACPI: SSDT 0x00000000BEFE9E18 00017B (v02 INTEL S1200BTS 00002000 INTL 20100331) [ 0.034180] ACPI: RMAD 0x00000000BEFE8F18 000078 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034195] ACPI: SPCR 0x00000000BEFFED98 000050 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034210] ACPI: HEST 0x00000000BEFFCF18 0000A8 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034225] ACPI: BERT 0x00000000BEFFED18 000030 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034240] ACPI: ERST 0x00000000BEFE8C98 000230 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034256] ACPI: EINJ 0x00000000BEFFC918 000130 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034264] ACPI: Reserving FACP table memory at [mem 0xbeffca98-0xbeffcb8b] [ 0.034265] ACPI: Reserving DSDT table memory at [mem 0xbefee018-0xbeffae5f] [ 0.034266] ACPI: Reserving FACS table memory at [mem 0xbeffdd40-0xbeffdd7f] [ 0.034267] ACPI: Reserving APIC table memory at [mem 0xbeffb018-0xbeffb669] [ 0.034268] ACPI: Reserving SPMI table memory at [mem 0xbeffec18-0xbeffec57] [ 0.034269] ACPI: Reserving MCFG table memory at [mem 0xbeffeb98-0xbeffebd3] [ 0.034269] ACPI: Reserving WDDT table memory at [mem 0xbeffef18-0xbeffef57] [ 0.034270] ACPI: Reserving HPET table memory at [mem 0xbeffee98-0xbeffeecf] [ 0.034271] ACPI: Reserving SSDT table memory at [mem 0xbefeb018-0xbefec0bf] [ 0.034272] ACPI: Reserving BOOT table memory at [mem 0xbeffee18-0xbeffee3f] [ 0.034273] ACPI: Reserving SSDT table memory at [mem 0xbefe7698-0xbefe7c77] [ 0.034273] ACPI: Reserving SSDT table memory at [mem 0xbefe6018-0xbefe6aa9] [ 0.034274] ACPI: Reserving SSDT table memory at [mem 0xbefea598-0xbefeaae4] [ 0.034275] ACPI: Reserving SSDT table memory at [mem 0xbeffdb18-0xbeffdb80] [ 0.034276] ACPI: Reserving SSDT table memory at [mem 0xbefe9e18-0xbefe9f92] [ 0.034277] ACPI: Reserving RMAD table memory at [mem 0xbefe8f18-0xbefe8f8f] [ 0.034277] ACPI: Reserving SPCR table memory at [mem 0xbeffed98-0xbeffede7] [ 0.034278] ACPI: Reserving HEST table memory at [mem 0xbeffcf18-0xbeffcfbf] [ 0.034279] ACPI: Reserving BERT table memory at [mem 0xbeffed18-0xbeffed47] [ 0.034280] ACPI: Reserving ERST table memory at [mem 0xbefe8c98-0xbefe8ec7] [ 0.034280] ACPI: Reserving EINJ table memory at [mem 0xbeffc918-0xbeffca47] [ 0.034372] APIC: Switched APIC routing to: Xen PV [ 0.038887] Zone ranges: [ 0.038888] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.038890] DMA32 [mem 0x0000000001000000-0x0000000020064fff] [ 0.038891] Normal empty [ 0.038892] Movable zone start for each node [ 0.038893] Early memory node ranges [ 0.038893] node 0: [mem 0x0000000000001000-0x000000000009afff] [ 0.038895] node 0: [mem 0x0000000000100000-0x0000000020064fff] [ 0.038896] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020064fff] [ 0.038901] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.038941] On node 0, zone DMA: 101 pages in unavailable ranges [ 0.040562] On node 0, zone DMA32: 32667 pages in unavailable ranges [ 0.040568] p2m virtual area at (____ptrval____), size is 40000000 [ 0.176624] Remapped 101 page(s) [ 0.177304] ACPI: PM-Timer IO Port: 0x408 [ 0.177464] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.177509] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.177536] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.177539] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.177591] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.177596] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.177605] ACPI: SPCR: SPCR table version 1 [ 0.177608] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.177617] CPU topo: Max. logical packages: 1 [ 0.177618] CPU topo: Max. logical dies: 1 [ 0.177618] CPU topo: Max. dies per package: 1 [ 0.177623] CPU topo: Max. threads per core: 1 [ 0.177624] CPU topo: Num. cores per package: 4 [ 0.177624] CPU topo: Num. threads per package: 4 [ 0.177625] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.177640] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.177642] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009bfff] [ 0.177643] PM: hibernation: Registered nosave memory: [mem 0x0009c000-0x000fffff] [ 0.177644] [mem 0x20065000-0xab9b9fff] available for PCI devices [ 0.177649] Booting kernel on Xen [ 0.177649] Xen version: 4.19-unstable (preserve-AD) [ 0.177652] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.182934] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.183370] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u524288 [ 0.183375] pcpu-alloc: s194408 r8192 d30872 u524288 alloc=1*2097152 [ 0.183378] pcpu-alloc: [0] 0 1 2 3 [ 0.183426] xen: PV spinlocks enabled [ 0.183429] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.183431] Kernel command line: placeholder root=/dev/mapper/italia1--vg-root ro console=hvc0 [ 0.183467] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.183557] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.183601] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.184258] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.184262] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.184264] software IO TLB: area num 4. [ 0.246225] Memory: 386516K/524284K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 137516K reserved, 0K cma-reserved) [ 0.246401] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.248527] Dynamic Preempt: voluntary [ 0.248695] rcu: Preemptible hierarchical RCU implementation. [ 0.248696] rcu: RCU event tracing is enabled. [ 0.248696] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.248698] Trampoline variant of Tasks RCU enabled. [ 0.248699] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.248699] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.248722] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.260947] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.261104] xen:events: Using FIFO-based ABI [ 0.261128] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.261138] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.261146] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.261154] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.261163] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.261171] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.261179] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.261187] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.261197] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.261205] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.261214] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.261222] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.261230] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.261239] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.261247] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.261256] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.266552] Console: colour VGA+ 80x25 [ 0.266555] printk: legacy console [tty0] enabled [ 0.282784] printk: legacy console [hvc0] enabled [ 0.284123] ACPI: Core revision 20240322 [ 0.288703] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.288861] Xen: using vcpuop timer interface [ 0.288866] installing Xen timer for CPU 0 [ 0.289017] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c955856658, max_idle_ns: 440795256416 ns [ 0.289175] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.94 BogoMIPS (lpj=3092972) [ 0.289480] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.289598] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.289723] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.289910] Spectre V2 : Mitigation: Retpolines [ 0.290181] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.290325] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.290443] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.290564] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.290712] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.291181] MDS: Mitigation: Clear CPU buffers [ 0.291294] MMIO Stale Data: Unknown: No mitigations [ 0.291469] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.291613] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.291730] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.291848] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.291966] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.310724] Freeing SMP alternatives memory: 40K [ 0.310852] pid_max: default: 32768 minimum: 301 [ 0.310982] LSM: initializing lsm=capability,selinux [ 0.311100] SELinux: Initializing. [ 0.311201] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.311347] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.311809] cpu 0 spinlock event irq 25 [ 0.311925] VPMU disabled by hypervisor. [ 0.312648] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.312800] signal: max sigframe size: 1776 [ 0.312986] rcu: Hierarchical SRCU implementation. [ 0.313102] rcu: Max phase no-delay instances is 400. [ 0.313679] smp: Bringing up secondary CPUs ... [ 0.314062] installing Xen timer for CPU 1 [ 0.314569] installing Xen timer for CPU 2 [ 0.315090] installing Xen timer for CPU 3 [ 0.028913] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0002 [ 0.315297] cpu 1 spinlock event irq 45 [ 0.028913] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0004 [ 0.315478] cpu 2 spinlock event irq 46 [ 0.028913] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0006 [ 0.316218] cpu 3 spinlock event irq 47 [ 0.317288] smp: Brought up 1 node, 4 CPUs [ 0.317570] devtmpfs: initialized [ 0.317570] x86/mm: Memory block size: 128MB [ 0.318277] ACPI: PM: Registering ACPI NVS region [mem 0xab9ba000-0xbba3afff] (268963840 bytes) [ 0.320420] ACPI: PM: Registering ACPI NVS region [mem 0xbede0000-0xbefdffff] (2097152 bytes) [ 0.320629] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.320783] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.321032] PM: RTC time: 01:45:07, date: 2024-06-27 [ 0.321322] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.321464] xen:grant_table: Grant tables using version 1 layout [ 0.321639] Grant table initialized [ 0.321873] audit: initializing netlink subsys (disabled) [ 0.322005] audit: type=2000 audit(1719452708.167:1): state=initialized audit_enabled=0 res=1 [ 0.322224] thermal_sys: Registered thermal governor 'step_wise' [ 0.322226] thermal_sys: Registered thermal governor 'user_space' [ 0.322372] Simple Boot Flag at 0x4f set to 0x1 [ 0.322619] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.322966] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f] [ 0.323328] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved as E820 entry [ 0.360633] PCI: Using configuration type 1 for base access [ 0.360805] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.361250] ACPI: Added _OSI(Module Device) [ 0.361363] ACPI: Added _OSI(Processor Device) [ 0.361476] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.361590] ACPI: Added _OSI(Processor Aggregator Device) [ 0.368399] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.369123] xen: registering gsi 9 triggering 0 polarity 0 [ 0.369593] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.373277] ACPI: Dynamic OEM Table Load: [ 0.373397] ACPI: SSDT 0xFFFF888003937000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20100331) [ 0.374168] ACPI: Dynamic OEM Table Load: [ 0.374292] ACPI: SSDT 0xFFFF88800399E400 000303 (v01 PmRef ApIst 00003000 INTL 20100331) [ 0.374880] ACPI: Dynamic OEM Table Load: [ 0.374995] ACPI: SSDT 0xFFFF888003980A00 000119 (v01 PmRef ApCst 00003000 INTL 20100331) [ 0.375947] ACPI: _OSC evaluated successfully for all CPUs [ 0.376208] ACPI: Interpreter enabled [ 0.376336] ACPI: PM: (supports S0 S1 S3 S5) [ 0.376449] ACPI: Using IOAPIC for interrupt routing [ 0.376633] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.376783] PCI: Using E820 reservations for host bridge windows [ 0.377132] ACPI: Enabled 10 GPEs in block 00 to 3F [ 0.385460] acpi ABCDEFGH:00: ACPI dock station (docks/bays count: 1) [ 0.388134] ACPI: \_TZ_.FN00: New power resource [ 0.388239] ACPI: \_TZ_.FN01: New power resource [ 0.388413] ACPI: \_TZ_.FN02: New power resource [ 0.388585] ACPI: \_TZ_.FN03: New power resource [ 0.388806] ACPI: \_TZ_.FN04: New power resource [ 0.389642] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.389768] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.390377] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.391045] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.391166] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.391852] PCI host bridge to bus 0000:00 [ 0.391966] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.392087] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.392178] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.392322] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000e7fff window] [ 0.392465] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window] [ 0.392608] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.392750] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.392960] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000 conventional PCI endpoint [ 0.393640] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 conventional PCI endpoint [ 0.393862] pci 0000:00:19.0: BAR 0 [mem 0xc1b00000-0xc1b1ffff] [ 0.394019] pci 0000:00:19.0: BAR 1 [mem 0xc1b70000-0xc1b70fff] [ 0.394212] pci 0000:00:19.0: BAR 2 [io 0x4040-0x405f] [ 0.394661] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.395006] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 conventional PCI endpoint [ 0.395230] pci 0000:00:1a.0: BAR 0 [mem 0xc1b60000-0xc1b603ff] [ 0.395818] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.396160] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 PCIe Root Port [ 0.396335] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.396467] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.396598] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc19fffff] [ 0.396821] pci 0000:00:1c.0: bridge window [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.397244] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.397454] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.397576] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.397888] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 PCIe Root Port [ 0.398239] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.398372] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.398502] pci 0000:00:1c.4: bridge window [mem 0xc1a00000-0xc1afffff] [ 0.398950] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.399156] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.399185] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.399551] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 conventional PCI endpoint [ 0.399772] pci 0000:00:1d.0: BAR 0 [mem 0xc1b50000-0xc1b503ff] [ 0.400301] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.400628] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 conventional PCI bridge [ 0.400963] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.401111] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc0ffffff] [ 0.401514] pci 0000:00:1f.0: [8086:1c52] type 00 class 0x060100 conventional PCI endpoint [ 0.402330] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 conventional PCI endpoint [ 0.402548] pci 0000:00:1f.2: BAR 0 [io 0x4090-0x4097] [ 0.402705] pci 0000:00:1f.2: BAR 1 [io 0x4080-0x4083] [ 0.402860] pci 0000:00:1f.2: BAR 2 [io 0x4070-0x4077] [ 0.403013] pci 0000:00:1f.2: BAR 3 [io 0x4060-0x4063] [ 0.403166] pci 0000:00:1f.2: BAR 4 [io 0x4020-0x403f] [ 0.403219] pci 0000:00:1f.2: BAR 5 [mem 0xc1b40000-0xc1b407ff] [ 0.403621] pci 0000:00:1f.2: PME# supported from D3hot [ 0.403923] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 conventional PCI endpoint [ 0.404164] pci 0000:00:1f.3: BAR 0 [mem 0xc1b30000-0xc1b300ff 64bit] [ 0.404294] pci 0000:00:1f.3: BAR 4 [io 0x4000-0x401f] [ 0.404816] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.405242] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.405484] pci 0000:02:00.0: BAR 0 [mem 0xc1a00000-0xc1a1ffff] [ 0.405706] pci 0000:02:00.0: BAR 2 [io 0x2000-0x201f] [ 0.405873] pci 0000:02:00.0: BAR 3 [mem 0xc1a20000-0xc1a23fff] [ 0.406531] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.407072] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.407321] pci_bus 0000:03: extended config space not accessible [ 0.407550] pci 0000:03:02.0: [126f:0712] type 00 class 0x030000 conventional PCI endpoint [ 0.407770] pci 0000:03:02.0: BAR 0 [mem 0xc0000000-0xc0ffffff] [ 0.408160] pci 0000:03:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.408287] pci 0000:03:02.0: supports D1 D2 [ 0.408691] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.408857] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.409005] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.409153] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.409179] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000e7fff window] (subtractive decode) [ 0.409326] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff window] (subtractive decode) [ 0.409476] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.409784] pci_bus 0000:00: on NUMA node 0 [ 0.409949] xen: registering gsi 13 triggering 1 polarity 0 [ 0.410459] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.410655] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.410842] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.410960] ACPI: PCI: Interrupt link LNKC disabled [ 0.411187] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.411374] ACPI: PCI: Interrupt link LNKE configured for IRQ 3 [ 0.411559] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 0.411745] ACPI: PCI: Interrupt link LNKG configured for IRQ 5 [ 0.411930] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.412048] ACPI: PCI: Interrupt link LNKH disabled [ 0.412541] xen:balloon: Initialising balloon driver [ 0.412671] iommu: Default domain type: Translated [ 0.412671] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.412671] SCSI subsystem initialized [ 0.413220] libata version 3.00 loaded. [ 0.413220] ACPI: bus type USB registered [ 0.413341] usbcore: registered new interface driver usbfs [ 0.413462] usbcore: registered new interface driver hub [ 0.413583] usbcore: registered new device driver usb [ 0.413757] pps_core: LinuxPPS API ver. 1 registered [ 0.413871] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.414022] PTP clock support registered [ 0.414222] Advanced Linux Sound Architecture Driver Initialized. [ 0.414516] NetLabel: Initializing [ 0.414629] NetLabel: domain hash size = 128 [ 0.414742] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.414912] NetLabel: unlabeled traffic allowed by default [ 0.415210] PCI: Using ACPI for IRQ routing [ 0.426144] PCI: pci_cache_line_size set to 64 bytes [ 0.426291] e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff] [ 0.426293] e820: reserve RAM buffer [mem 0x20065000-0x23ffffff] [ 0.426316] pci 0000:03:02.0: vgaarb: setting as boot VGA device [ 0.426321] pci 0000:03:02.0: vgaarb: bridge control possible [ 0.426440] pci 0000:03:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.426586] vgaarb: loaded [ 0.427308] clocksource: Switched to clocksource tsc-early [ 0.427537] VFS: Disk quotas dquot_6.6.0 [ 0.427655] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.427800] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.427955] pnp: PnP ACPI init [ 0.428152] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.428185] system 00:00: [io 0xffff] has been reserved [ 0.428302] system 00:00: [io 0xffff] has been reserved [ 0.428417] system 00:00: [io 0xffff] has been reserved [ 0.428531] system 00:00: [io 0x0400-0x0453] has been reserved [ 0.428700] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.428819] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.428937] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.429056] system 00:00: [io 0x0900-0x090f] has been reserved [ 0.429184] system 00:00: [io 0x0295-0x0296] has been reserved [ 0.429320] xen: registering gsi 8 triggering 1 polarity 0 [ 0.429383] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.429785] xen: registering gsi 4 triggering 1 polarity 0 [ 0.429789] Already setup the GSI :4 [ 0.430348] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.430475] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.430595] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.430716] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.430837] system 00:04: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.430957] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.431076] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.431208] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.431328] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved [ 0.431489] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.431609] system 00:04: [mem 0xc1b90000-0xc1b90fff] has been reserved [ 0.431988] system 00:05: [mem 0x00000000-0x0009cfff] could not be reserved [ 0.432157] pnp: PnP ACPI: found 6 devices [ 0.461952] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.462092] NET: Registered PF_INET protocol family [ 0.462249] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.462553] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.462703] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.462849] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.462999] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.463162] TCP: Hash tables configured (established 4096 bind 4096) [ 0.463390] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.463514] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.463661] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.466411] RPC: Registered named UNIX socket transport module. [ 0.466536] RPC: Registered udp transport module. [ 0.466650] RPC: Registered tcp transport module. [ 0.466764] RPC: Registered tcp-with-tls transport module. [ 0.466878] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.467347] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.467474] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.467610] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc19fffff] [ 0.467741] pci 0000:00:1c.0: bridge window [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.467907] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.468027] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.468161] pci 0000:00:1c.4: bridge window [mem 0xc1a00000-0xc1afffff] [ 0.468327] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 0.468459] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc0ffffff] [ 0.468613] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.468732] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.468851] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.468971] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000e7fff window] [ 0.469090] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfeafffff window] [ 0.469219] pci_bus 0000:00: resource 9 [mem 0xfed40000-0xfed44fff window] [ 0.469339] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.469455] pci_bus 0000:01: resource 1 [mem 0xc1000000-0xc19fffff] [ 0.469574] pci_bus 0000:01: resource 2 [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.469716] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.469832] pci_bus 0000:02: resource 1 [mem 0xc1a00000-0xc1afffff] [ 0.469950] pci_bus 0000:03: resource 1 [mem 0xc0000000-0xc0ffffff] [ 0.470069] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.470196] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.470349] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.470469] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000e7fff window] [ 0.470590] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xfeafffff window] [ 0.470710] pci_bus 0000:03: resource 9 [mem 0xfed40000-0xfed44fff window] [ 0.470947] xen: registering gsi 22 triggering 0 polarity 1 [ 0.470972] xen: --> pirq=22 -> irq=22 (gsi=22) [ 0.492289] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x7c0 took 20897 usecs [ 0.492511] xen: registering gsi 20 triggering 0 polarity 1 [ 0.492534] xen: --> pirq=20 -> irq=20 (gsi=20) [ 0.513308] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x7c0 took 20354 usecs [ 0.513511] PCI: CLS 64 bytes, default 64 [ 0.513662] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.513740] Unpacking initramfs... [ 0.513780] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.514105] kvm_intel: VMX not supported by CPU 2 [ 0.514234] kvm_amd: CPU 2 isn't AMD or Hygon [ 0.514351] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c955856658, max_idle_ns: 440795256416 ns [ 0.514557] clocksource: Switched to clocksource tsc [ 0.519761] Initialise system trusted keyrings [ 0.520006] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.520320] NFS: Registering the id_resolver key type [ 0.520446] Key type id_resolver registered [ 0.520558] Key type id_legacy registered [ 0.520730] 9p: Installing v9fs 9p2000 file system support [ 0.533730] Key type asymmetric registered [ 0.533857] Asymmetric key parser 'x509' registered [ 0.534009] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.534165] io scheduler mq-deadline registered [ 0.534280] io scheduler kyber registered [ 0.534741] xen: registering gsi 16 triggering 0 polarity 1 [ 0.534772] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.535017] pcieport 0000:00:1c.0: PME: Signaling with IRQ 50 [ 0.535385] xen: registering gsi 16 triggering 0 polarity 1 [ 0.535390] Already setup the GSI :16 [ 0.535692] pcieport 0000:00:1c.4: PME: Signaling with IRQ 51 [ 0.536128] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.536373] ACPI: button: Sleep Button [SLPB] [ 0.536520] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.536750] ACPI: button: Power Button [PWRF] [ 0.537249] Monitor-Mwait will be used to enter C-1 state [ 0.537287] Monitor-Mwait will be used to enter C-3 state [ 0.537304] ACPI: \_PR_.CPU0: Found 2 idle states [ 0.537699] ACPI: \_PR_.CPU1: Found 2 idle states [ 0.538129] ACPI: \_PR_.CPU2: Found 2 idle states [ 0.538453] ACPI: \_PR_.CPU3: Found 2 idle states [ 0.539034] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.539155] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.539465] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.539584] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.540009] xen:xen_evtchn: Event-channel device installed [ 0.540218] xen_pciback: backend is vpci [ 0.541069] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.541958] hpet_acpi_add: no address or irqs in _CRS [ 0.542147] Non-volatile memory driver v1.3 [ 0.543911] loop: module loaded [ 0.548729] ahci 0000:00:1f.2: version 3.0 [ 0.548826] xen: registering gsi 21 triggering 0 polarity 1 [ 0.548855] xen: --> pirq=21 -> irq=21 (gsi=21) [ 0.559195] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 3 Gbps, SATA mode [ 0.559355] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 0.561092] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 0.576682] scsi host0: ahci [ 0.577173] scsi host1: ahci [ 0.577616] scsi host2: ahci [ 0.578023] scsi host3: ahci [ 0.578402] scsi host4: ahci [ 0.578727] scsi host5: ahci [ 0.578870] ata1: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40100 irq 53 lpm-pol 0 [ 0.579036] ata2: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40180 irq 53 lpm-pol 0 [ 0.579186] ata3: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40200 irq 53 lpm-pol 0 [ 0.579333] ata4: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40280 irq 53 lpm-pol 0 [ 0.579479] ata5: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40300 irq 53 lpm-pol 0 [ 0.579624] ata6: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40380 irq 53 lpm-pol 0 [ 0.579990] tun: Universal TUN/TAP device driver, 1.6 [ 0.580203] e100: Intel(R) PRO/100 Network Driver [ 0.580319] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.580442] sky2: driver version 1.30 [ 0.580575] xen_netfront: Initialising Xen virtual ethernet driver [ 0.580830] usbcore: registered new interface driver usblp [ 0.580971] usbcore: registered new interface driver usb-storage [ 0.581003] xen: registering gsi 22 triggering 0 polarity 1 [ 0.581096] Already setup the GSI :22 [ 0.581121] i8042: PNP: No PS/2 controller found. [ 0.581304] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.581466] rtc_cmos 00:01: RTC can wake from S4 [ 0.581500] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.581517] xen: registering gsi 20 triggering 0 polarity 1 [ 0.581524] Already setup the GSI :20 [ 0.581876] ehci-pci 0000:00:1a.0: debug port 2 [ 0.582248] rtc_cmos 00:01: registered as rtc0 [ 0.582430] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram [ 0.582593] device-mapper: uevent: version 1.0.3 [ 0.582774] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.582954] intel_pstate: CPU model not supported [ 0.583094] hid: raw HID events driver (C) Jiri Kosina [ 0.583325] usbcore: registered new interface driver usbhid [ 0.583455] usbhid: USB HID core driver [ 0.583858] Initializing XFRM netlink socket [ 0.584030] NET: Registered PF_INET6 protocol family [ 0.584037] xen: registering gsi 22 triggering 0 polarity 1 [ 0.584164] Already setup the GSI :22 [ 0.584382] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.585229] Segment Routing with IPv6 [ 0.585378] In-situ OAM (IOAM) with IPv6 [ 0.585536] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.585789] NET: Registered PF_PACKET protocol family [ 0.585959] ehci-pci 0000:00:1a.0: irq 22, io mem 0xc1b60000 [ 0.585966] 9pnet: Installing 9P2000 support [ 0.586230] Key type dns_resolver registered [ 0.586467] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.586711] IPI shorthand broadcast: enabled [ 0.589030] sched_clock: Marking stable (561035526, 27913884)->(594325614, -5376204) [ 0.589499] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.589776] registered taskstats version 1 [ 0.589889] Loading compiled-in X.509 certificates [ 0.591136] PM: Magic number: 12:368:762 [ 0.591317] printk: legacy console [netcon0] enabled [ 0.591433] netconsole: network logging started [ 0.591760] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.592949] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.593281] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.593431] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.593574] usb usb1: Product: EHCI Host Controller [ 0.593689] usb usb1: Manufacturer: Linux 6.10.0-rc5+ ehci_hcd [ 0.593806] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.594102] hub 1-0:1.0: USB hub found [ 0.594246] hub 1-0:1.0: 2 ports detected [ 0.594595] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.594790] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.594986] ehci-pci 0000:00:1d.0: debug port 2 [ 0.599094] ehci-pci 0000:00:1d.0: irq 20, io mem 0xc1b50000 [ 0.606787] Freeing initrd memory: 20116K [ 0.606944] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.607196] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.607348] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.607499] usb usb2: Product: EHCI Host Controller [ 0.607618] usb usb2: Manufacturer: Linux 6.10.0-rc5+ ehci_hcd [ 0.607736] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.608046] hub 2-0:1.0: USB hub found [ 0.608177] hub 2-0:1.0: 2 ports detected [ 0.618535] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.618846] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.619022] ALSA device list: [ 0.619132] No soundcards found. [ 0.619798] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.835010] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.850978] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.887515] ata4: SATA link down (SStatus 0 SControl 300) [ 0.887661] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.887801] ata2: SATA link down (SStatus 0 SControl 300) [ 0.887955] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.888096] ata5: SATA link down (SStatus 0 SControl 300) [ 0.888229] ata6: SATA link down (SStatus 0 SControl 300) [ 0.889668] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 0.890297] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.891833] ata3.00: ATAPI: Slimtype DVD A DS8ABSH, AP52, max UDMA/100 [ 0.893067] ata1.00: configured for UDMA/133 [ 0.893314] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 0.893948] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.893983] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.894270] sd 0:0:0:0: [sda] Write Protect is off [ 0.894395] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.894505] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.894863] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 0.898195] ata3.00: configured for UDMA/100 [ 0.907656] scsi 2:0:0:0: CD-ROM Slimtype DVD A DS8ABSH AP52 PQ: 0 ANSI: 5 [ 0.920913] sda: sda1 sda2 < sda5 > [ 0.921518] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.941043] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.941195] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.963758] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.963909] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.964569] hub 1-1:1.0: USB hub found [ 0.964861] hub 1-1:1.0: 6 ports detected [ 0.965195] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 0.965364] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 0.967198] Freeing unused kernel image (initmem) memory: 2680K [ 0.967333] Write protecting the kernel read-only data: 24576k [ 0.979274] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.979424] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.979804] hub 2-1:1.0: USB hub found [ 0.980029] hub 2-1:1.0: 6 ports detected [ 0.988817] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 1.155928] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.156053] Run /init as init process [ 1.156162] with arguments: [ 1.156163] /init [ 1.156164] placeholder [ 1.156165] with environment: [ 1.156166] HOME=/ [ 1.156167] TERM=linux [ 1.498244] e1000e: Intel(R) PRO/1000 Network Driver [ 1.498372] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.498587] xen: registering gsi 19 triggering 0 polarity 1 [ 1.498614] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.498862] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.607829] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 1.705810] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:67:96:a5:3d [ 1.706026] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.706196] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 0050FF-0FF [ 1.706439] xen: registering gsi 16 triggering 0 polarity 1 [ 1.706447] Already setup the GSI :16 [ 1.706875] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.749883] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 1.796526] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:1e:67:96:a5:3c [ 1.796680] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 1.796884] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 1000FF-0FF [ 1.798991] e1000e 0000:02:00.0 enx001e6796a53c: renamed from eth1 [ 1.799591] e1000e 0000:00:19.0 enx001e6796a53d: renamed from eth0 [ 1.857942] random: crng init done [ 2.433089] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 2.437899] EXT4-fs (dm-0): mounted filesystem 58a42478-ecba-4909-aece-0bc2f2c37cce ro with ordered data mode. Quota mode: none. [ 5.945806] EXT4-fs (dm-0): re-mounted 58a42478-ecba-4909-aece-0bc2f2c37cce r/w. Quota mode: none. [ 7.338242] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 7.345036] EXT4-fs (sda1): mounted filesystem 890691cf-d438-40e6-96e9-873995d2b6aa r/w with ordered data mode. Quota mode: none. [ 7.462208] Adding 1949692k swap on /dev/mapper/italia1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 9.265813] xenbr0: port 1(enx001e6796a53c) entered blocking state [ 9.265980] xenbr0: port 1(enx001e6796a53c) entered disabled state [ 9.266107] e1000e 0000:02:00.0 enx001e6796a53c: entered allmulticast mode [ 9.266264] e1000e 0000:02:00.0 enx001e6796a53c: entered promiscuous mode [ 11.839019] e1000e 0000:02:00.0 enx001e6796a53c: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 11.839583] xenbr0: port 1(enx001e6796a53c) entered blocking state [ 11.839710] xenbr0: port 1(enx001e6796a53c) entered forwarding state