[ 0.000000] Linux version 6.1.95+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Thu Jun 27 04:14:47 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000459] tsc: Detected 2199.998 MHz processor [ 0.000904] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000908] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000914] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000916] Disabled [ 0.000917] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000921] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000960] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027751] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.027760] ACPI: Early table checksum verification disabled [ 0.028359] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028371] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028407] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028455] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028471] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028487] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028503] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028519] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028535] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028551] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028568] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028584] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028600] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028616] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028632] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028648] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028664] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028680] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028696] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028716] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028732] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028748] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028756] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028758] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028759] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028760] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028761] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028762] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028763] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028764] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028765] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028766] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028766] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028767] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028768] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028769] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028770] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028771] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028772] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028773] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028774] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028775] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028821] Setting APIC routing to Xen PV. [ 0.032778] Zone ranges: [ 0.032780] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032782] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032784] Normal empty [ 0.032785] Movable zone start for each node [ 0.032786] Early memory node ranges [ 0.032787] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032788] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032790] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032795] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032832] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034381] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034386] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221899] Remapped 102 page(s) [ 0.223272] ACPI: PM-Timer IO Port: 0x408 [ 0.223324] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223327] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223328] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223330] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223332] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223333] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223334] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223336] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223364] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223377] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223380] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223406] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223411] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223481] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223496] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223498] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223499] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223501] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223506] Booting kernel on Xen [ 0.223507] Xen version: 4.19-unstable (preserve-AD) [ 0.223510] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229720] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.230003] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.230010] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.230013] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230090] xen: PV spinlocks enabled [ 0.230093] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230098] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230100] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230138] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230148] random: crng init done [ 0.230197] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230222] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231557] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231560] software IO TLB: area num 8. [ 0.291023] Memory: 390032K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1576K init, 1296K bss, 134000K reserved, 0K cma-reserved) [ 0.291191] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.293695] Dynamic Preempt: voluntary [ 0.293795] rcu: Preemptible hierarchical RCU implementation. [ 0.293796] rcu: RCU event tracing is enabled. [ 0.293796] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.293798] Trampoline variant of Tasks RCU enabled. [ 0.293799] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.293800] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.304298] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.304423] xen:events: Using FIFO-based ABI [ 0.304447] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.304455] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.304463] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.304470] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.304478] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.304485] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.304492] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.304500] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.304507] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.304515] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.304522] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.304530] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.304537] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.304546] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.304554] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.304565] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.309908] Console: colour VGA+ 80x25 [ 0.324570] printk: console [tty0] enabled [ 0.325903] printk: console [hvc0] enabled [ 0.326041] ACPI: Core revision 20220331 [ 0.341537] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.341702] Xen: using vcpuop timer interface [ 0.341709] installing Xen timer for CPU 0 [ 0.341858] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.342015] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199998) [ 0.342342] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.342459] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.342585] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.342734] Spectre V2 : Mitigation: Retpolines [ 0.343021] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.343177] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.343296] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.343416] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.343563] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.343681] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.343831] MDS: Mitigation: Clear CPU buffers [ 0.343944] TAA: Mitigation: Clear CPU buffers [ 0.344018] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.344183] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.344327] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.344452] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.344570] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.344689] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.362427] Freeing SMP alternatives memory: 40K [ 0.362553] pid_max: default: 32768 minimum: 301 [ 0.363037] LSM: Security Framework initializing [ 0.363159] SELinux: Initializing. [ 0.363299] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363449] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364107] cpu 0 spinlock event irq 25 [ 0.364226] VPMU disabled by hypervisor. [ 0.364659] cblist_init_generic: Setting adjustable number of callback queues. [ 0.364804] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.364960] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.365019] signal: max sigframe size: 1776 [ 0.365182] rcu: Hierarchical SRCU implementation. [ 0.365318] rcu: Max phase no-delay instances is 400. [ 0.365812] smp: Bringing up secondary CPUs ... [ 0.366151] installing Xen timer for CPU 1 [ 0.366618] cpu 1 spinlock event irq 35 [ 0.367156] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.367323] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.367509] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.368237] installing Xen timer for CPU 2 [ 0.368703] cpu 2 spinlock event irq 41 [ 0.369102] installing Xen timer for CPU 3 [ 0.369532] cpu 3 spinlock event irq 47 [ 0.369532] installing Xen timer for CPU 4 [ 0.370380] cpu 4 spinlock event irq 53 [ 0.370380] installing Xen timer for CPU 5 [ 0.371177] cpu 5 spinlock event irq 59 [ 0.371220] installing Xen timer for CPU 6 [ 0.372061] cpu 6 spinlock event irq 65 [ 0.372270] installing Xen timer for CPU 7 [ 0.372701] cpu 7 spinlock event irq 71 [ 0.373217] smp: Brought up 1 node, 8 CPUs [ 0.373340] smpboot: Max logical packages: 1 [ 0.373557] devtmpfs: initialized [ 0.373557] x86/mm: Memory block size: 128MB [ 0.374251] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.374279] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.374439] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.374687] PM: RTC time: 04:42:35, date: 2024-06-27 [ 0.375162] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.375304] xen:grant_table: Grant tables using version 1 layout [ 0.375440] Grant table initialized [ 0.375741] audit: initializing netlink subsys (disabled) [ 0.376037] audit: type=2000 audit(1719463355.795:1): state=initialized audit_enabled=0 res=1 [ 0.376121] thermal_sys: Registered thermal governor 'step_wise' [ 0.376121] thermal_sys: Registered thermal governor 'user_space' [ 0.376246] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.376676] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.377027] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.505970] PCI: Using configuration type 1 for base access [ 0.508542] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.509087] ACPI: Added _OSI(Module Device) [ 0.509184] ACPI: Added _OSI(Processor Device) [ 0.509184] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.509184] ACPI: Added _OSI(Processor Aggregator Device) [ 0.539223] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.541217] xen: registering gsi 9 triggering 0 polarity 0 [ 0.543947] ACPI: Dynamic OEM Table Load: [ 0.552625] ACPI: Interpreter enabled [ 0.552757] ACPI: PM: (supports S0 S4 S5) [ 0.552869] ACPI: Using IOAPIC for interrupt routing [ 0.553013] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.553166] PCI: Using E820 reservations for host bridge windows [ 0.553776] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.589497] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.589625] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.589862] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.590131] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.590251] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.590426] PCI host bridge to bus 0000:ff [ 0.590538] pci_bus 0000:ff: root bus resource [bus ff] [ 0.590770] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.591217] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.591643] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.592070] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.592548] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.592976] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.593320] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.593780] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.594230] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.594664] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.595128] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.595552] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.595977] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.596360] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.596794] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.597218] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.597678] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.598107] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.598360] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.598819] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.599330] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.599796] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.600301] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.600766] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.601234] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.601730] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.602154] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.602584] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.603092] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.603558] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.604026] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.604523] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.604946] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.605323] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.605785] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.606219] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.606684] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.606684] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.606684] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.607013] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.607013] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.608059] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.608486] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.608733] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.609208] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.609634] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.610063] pci_bus 0000:ff: on NUMA node 0 [ 0.614542] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.614669] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.614944] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.615241] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.615361] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.615881] PCI host bridge to bus 0000:00 [ 0.615995] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.616018] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.616138] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.616282] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.616426] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.616604] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.617280] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.617800] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.618172] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.618730] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.619119] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.619634] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.620032] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.620547] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.620921] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.621468] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.621836] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.622353] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.622763] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.623339] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.624001] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.624565] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.624782] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.625279] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.625623] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.625840] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.626306] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.626649] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.626865] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.627324] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.627682] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.627917] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.628433] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.628751] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.629334] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.629533] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.629655] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.637227] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.637781] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.637975] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.638026] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.638315] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.638907] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.639093] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.639215] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.639499] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.640092] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.640285] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.640407] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.640736] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.640933] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.641472] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.641793] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.642586] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.642779] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.642937] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.643059] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.643216] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.643373] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.643530] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.643880] pci 0000:00:1f.2: PME# supported from D3hot [ 0.644162] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.644378] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.644622] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.644999] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.645155] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.645869] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.646164] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.646536] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.646747] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.647495] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.647708] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.648452] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.648664] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.649409] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.649621] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.650322] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.650457] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.650834] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.651047] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.651331] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.651514] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.651863] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.652119] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.652240] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.652443] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.652563] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.653139] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.653392] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.653676] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.653859] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.654207] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.654409] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.654530] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.654771] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.654891] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.655420] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.655554] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.655692] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.655981] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.656196] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.656558] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.656677] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.656882] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.657100] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.657265] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.657833] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.658297] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.658422] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.658550] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.658940] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.659018] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.659224] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.659440] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.659604] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.660155] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.660619] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.660744] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.660871] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.661210] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.661640] pci 0000:09:00.0: enabling Extended Tags [ 0.661979] pci 0000:09:00.0: supports D1 D2 [ 0.662017] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.662373] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.662499] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.662627] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.662967] pci_bus 0000:0a: extended config space not accessible [ 0.663070] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.663275] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.663442] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.663609] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.664000] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.664159] pci 0000:0a:00.0: supports D1 D2 [ 0.664272] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.664708] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.664846] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.664975] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.665324] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.665523] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.665732] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.665893] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.666406] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.666679] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.666823] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.667040] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.667184] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.667741] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.667981] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.668108] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.668269] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.668778] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.669006] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.669149] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.669405] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.669552] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.670071] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.670271] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.670483] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.670684] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.671195] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.671423] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.671567] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.671784] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.671967] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.672383] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.672584] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.672792] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.672953] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.673448] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.673676] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.673820] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.674039] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.674183] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.674801] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.674926] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.675028] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.675167] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.675635] pci_bus 0000:00: on NUMA node 0 [ 0.675730] xen: registering gsi 13 triggering 1 polarity 0 [ 0.676733] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.676929] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.677092] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.677322] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.677511] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.677629] ACPI: PCI: Interrupt link LNKE disabled [ 0.677813] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.677930] ACPI: PCI: Interrupt link LNKF disabled [ 0.678090] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.678208] ACPI: PCI: Interrupt link LNKG disabled [ 0.678392] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.678510] ACPI: PCI: Interrupt link LNKH disabled [ 0.678811] xen:balloon: Initialising balloon driver [ 0.679108] iommu: Default domain type: Translated [ 0.687019] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.687203] SCSI subsystem initialized [ 0.687330] libata version 3.00 loaded. [ 0.687330] ACPI: bus type USB registered [ 0.687330] usbcore: registered new interface driver usbfs [ 0.687330] usbcore: registered new interface driver hub [ 0.687424] usbcore: registered new device driver usb [ 0.687550] pps_core: LinuxPPS API ver. 1 registered [ 0.688018] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.688168] PTP clock support registered [ 0.688342] Advanced Linux Sound Architecture Driver Initialized. [ 0.688345] NetLabel: Initializing [ 0.688459] NetLabel: domain hash size = 128 [ 0.689019] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.689152] NetLabel: unlabeled traffic allowed by default [ 0.689291] PCI: Using ACPI for IRQ routing [ 0.723616] PCI: pci_cache_line_size set to 64 bytes [ 0.724391] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.724394] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.725056] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.725177] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.725294] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.725450] vgaarb: loaded [ 0.727016] clocksource: Switched to clocksource tsc-early [ 0.727262] VFS: Disk quotas dquot_6.6.0 [ 0.727386] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.727530] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.727687] pnp: PnP ACPI init [ 0.728182] xen: registering gsi 8 triggering 1 polarity 0 [ 0.728377] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.728502] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.728621] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.728739] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.728856] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.728974] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.729118] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.729246] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.729366] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.729485] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.729604] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.729724] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.729843] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.730277] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.730401] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.730519] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.730643] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.730760] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.731210] xen: registering gsi 4 triggering 1 polarity 0 [ 0.731216] Already setup the GSI :4 [ 0.731328] pnp 00:03: [dma 0 disabled] [ 0.731640] xen: registering gsi 3 triggering 1 polarity 0 [ 0.731652] pnp 00:04: [dma 0 disabled] [ 0.732262] pnp: PnP ACPI: found 5 devices [ 0.763529] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.763722] NET: Registered PF_INET protocol family [ 0.763882] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.764263] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.764413] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.764559] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.764709] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.764877] TCP: Hash tables configured (established 4096 bind 4096) [ 0.765050] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.765217] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.765391] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.765765] RPC: Registered named UNIX socket transport module. [ 0.765891] RPC: Registered udp transport module. [ 0.766004] RPC: Registered tcp transport module. [ 0.766132] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.766693] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.766864] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.767038] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.767214] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.767362] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.767536] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.767709] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.767843] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.768004] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.768179] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.768326] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.768469] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.768613] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.768734] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.768878] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.769033] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.769192] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.769316] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.769464] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.769607] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.769750] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.769872] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.770028] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.770180] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.770327] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.770461] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.770593] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.770763] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.770942] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.771143] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.771265] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.771404] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.771564] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.771683] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.771821] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.771982] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.772130] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.772279] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.772444] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.772564] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.772702] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.772866] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.773032] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.773198] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.773351] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.773503] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.773659] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.773811] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.773962] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.774138] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.774260] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.774398] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.774531] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.774704] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.774852] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.774978] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.775110] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.775230] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.775350] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.775469] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.775587] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.775731] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.775846] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.775964] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.776101] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.776222] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.776348] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.776467] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.776582] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.776701] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.776816] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.776935] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.777502] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.777724] xen: registering gsi 19 triggering 0 polarity 1 [ 0.777752] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.786511] xen: registering gsi 18 triggering 0 polarity 1 [ 0.786532] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.803502] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 16644 usecs [ 0.803746] xen: registering gsi 18 triggering 0 polarity 1 [ 0.803751] Already setup the GSI :18 [ 0.819471] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 15410 usecs [ 0.819684] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.819825] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.819897] Unpacking initramfs... [ 0.819944] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.820305] kvm: no hardware support for 'kvm_intel' [ 0.828095] has_svm: not amd or hygon [ 0.828210] kvm: no hardware support for 'kvm_amd' [ 0.828327] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.828569] clocksource: Switched to clocksource tsc [ 0.831289] Initialise system trusted keyrings [ 0.831634] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.833161] NFS: Registering the id_resolver key type [ 0.833285] Key type id_resolver registered [ 0.833424] Key type id_legacy registered [ 0.833623] 9p: Installing v9fs 9p2000 file system support [ 0.847425] Key type asymmetric registered [ 0.847561] Asymmetric key parser 'x509' registered [ 0.847700] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.847854] io scheduler mq-deadline registered [ 0.847967] io scheduler kyber registered [ 0.848947] xen: registering gsi 16 triggering 0 polarity 1 [ 0.848976] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.849576] xen: registering gsi 16 triggering 0 polarity 1 [ 0.849582] Already setup the GSI :16 [ 0.850170] xen: registering gsi 16 triggering 0 polarity 1 [ 0.850175] Already setup the GSI :16 [ 0.850511] xen: registering gsi 16 triggering 0 polarity 1 [ 0.850516] Already setup the GSI :16 [ 0.850835] xen: registering gsi 16 triggering 0 polarity 1 [ 0.850839] Already setup the GSI :16 [ 0.851416] xen: registering gsi 16 triggering 0 polarity 1 [ 0.851421] Already setup the GSI :16 [ 0.852005] xen: registering gsi 16 triggering 0 polarity 1 [ 0.852010] Already setup the GSI :16 [ 0.852457] xen: registering gsi 17 triggering 0 polarity 1 [ 0.852474] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.852815] xen: registering gsi 19 triggering 0 polarity 1 [ 0.852820] Already setup the GSI :19 [ 0.853254] xen: registering gsi 16 triggering 0 polarity 1 [ 0.853258] Already setup the GSI :16 [ 0.853936] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.854112] ACPI: button: Power Button [PWRB] [ 0.854275] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.854531] ACPI: button: Power Button [PWRF] [ 0.854821] Monitor-Mwait will be used to enter C-1 state [ 0.854858] Monitor-Mwait will be used to enter C-2 state [ 0.854874] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.855385] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.855838] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.856141] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.856651] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.857182] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.857561] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.858060] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.858898] xen:xen_evtchn: Event-channel device installed [ 0.859091] xen_pciback: backend is vpci [ 0.859916] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.860231] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.861013] hpet_acpi_add: no address or irqs in _CRS [ 0.861269] Non-volatile memory driver v1.3 [ 0.861382] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.864056] loop: module loaded [ 0.870935] ahci 0000:00:1f.2: version 3.0 [ 0.871036] xen: registering gsi 16 triggering 0 polarity 1 [ 0.871045] Already setup the GSI :16 [ 0.871368] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.871538] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.887124] scsi host0: ahci [ 0.887525] scsi host1: ahci [ 0.887901] scsi host2: ahci [ 0.888232] scsi host3: ahci [ 0.888648] scsi host4: ahci [ 0.889044] scsi host5: ahci [ 0.889196] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 0.889342] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 0.889504] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 0.889648] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 0.889791] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 0.889935] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 0.890373] tun: Universal TUN/TAP device driver, 1.6 [ 0.890665] e100: Intel(R) PRO/100 Network Driver [ 0.890802] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.890972] sky2: driver version 1.30 [ 0.891160] xen_netfront: Initialising Xen virtual ethernet driver [ 0.891570] xen: registering gsi 18 triggering 0 polarity 1 [ 0.891580] Already setup the GSI :18 [ 0.891790] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.891985] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.892160] ehci-pci 0000:00:1a.0: debug port 2 [ 0.896287] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.902505] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.902728] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.902875] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.903018] usb usb1: Product: EHCI Host Controller [ 0.903132] usb usb1: Manufacturer: Linux 6.1.95+ ehci_hcd [ 0.903248] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.903535] hub 1-0:1.0: USB hub found [ 0.903660] hub 1-0:1.0: 2 ports detected [ 0.904026] xen: registering gsi 18 triggering 0 polarity 1 [ 0.904035] Already setup the GSI :18 [ 0.904245] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.904476] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.904650] ehci-pci 0000:00:1d.0: debug port 2 [ 0.908755] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.915500] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.915719] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.915866] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.916008] usb usb2: Product: EHCI Host Controller [ 0.916122] usb usb2: Manufacturer: Linux 6.1.95+ ehci_hcd [ 0.916237] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.916520] hub 2-0:1.0: USB hub found [ 0.916644] hub 2-0:1.0: 2 ports detected [ 0.917073] xen: registering gsi 19 triggering 0 polarity 1 [ 0.917083] Already setup the GSI :19 [ 0.917288] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.917497] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.918713] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.919182] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.919382] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.919539] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.919745] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.919891] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.920034] usb usb3: Product: xHCI Host Controller [ 0.920148] usb usb3: Manufacturer: Linux 6.1.95+ xhci-hcd [ 0.920263] usb usb3: SerialNumber: 0000:00:14.0 [ 0.920604] hub 3-0:1.0: USB hub found [ 0.920752] hub 3-0:1.0: 8 ports detected [ 0.921874] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.922025] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.922174] usb usb4: Product: xHCI Host Controller [ 0.922288] usb usb4: Manufacturer: Linux 6.1.95+ xhci-hcd [ 0.922405] usb usb4: SerialNumber: 0000:00:14.0 [ 0.922702] hub 4-0:1.0: USB hub found [ 0.922836] hub 4-0:1.0: 6 ports detected [ 0.924122] usbcore: registered new interface driver usblp [ 0.924268] usbcore: registered new interface driver usb-storage [ 0.924420] i8042: PNP: No PS/2 controller found. [ 0.924828] rtc_cmos 00:00: RTC can wake from S4 [ 0.924898] Freeing initrd memory: 19884K [ 0.925552] rtc_cmos 00:00: registered as rtc0 [ 0.925709] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.925915] device-mapper: uevent: version 1.0.3 [ 0.926012] xen: registering gsi 18 triggering 0 polarity 1 [ 0.926037] Already setup the GSI :18 [ 0.926128] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.926182] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.926304] intel_pstate: CPU model not supported [ 0.926336] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.926436] hid: raw HID events driver (C) Jiri Kosina [ 0.926912] usbcore: registered new interface driver usbhid [ 0.926980] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.927028] usbhid: USB HID core driver [ 0.927441] Initializing XFRM netlink socket [ 0.927705] NET: Registered PF_INET6 protocol family [ 0.928398] Segment Routing with IPv6 [ 0.928531] In-situ OAM (IOAM) with IPv6 [ 0.928677] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.928918] NET: Registered PF_PACKET protocol family [ 0.929079] 9pnet: Installing 9P2000 support [ 0.929205] Key type dns_resolver registered [ 0.929909] IPI shorthand broadcast: enabled [ 0.930048] sched_clock: Marking stable (892425056, 37445624)->(1778211082, -848340402) [ 0.930638] registered taskstats version 1 [ 0.930754] Loading compiled-in X.509 certificates [ 0.933417] PM: Magic number: 12:136:718 [ 0.933647] acpi LNXCPU:51: hash matches [ 0.933780] printk: console [netcon0] enabled [ 0.933894] netconsole: network logging started [ 0.934232] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.945993] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.946332] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.946571] ALSA device list: [ 0.946698] No soundcards found. [ 0.947028] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 1.143612] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.159516] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.159657] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.196693] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.196924] ata1: SATA link down (SStatus 0 SControl 300) [ 1.197064] ata5: SATA link down (SStatus 0 SControl 300) [ 1.197218] ata2: SATA link down (SStatus 0 SControl 300) [ 1.197358] ata6: SATA link down (SStatus 0 SControl 300) [ 1.197531] ata4: SATA link down (SStatus 0 SControl 300) [ 1.198068] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.229578] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.229779] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.257662] ata3.00: configured for UDMA/133 [ 1.257995] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.258569] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.258675] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.258894] sd 2:0:0:0: [sda] Write Protect is off [ 1.259055] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.259122] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.259355] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.271850] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.272005] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.272414] hub 1-1:1.0: USB hub found [ 1.272761] hub 1-1:1.0: 4 ports detected [ 1.278625] sda: sda1 sda2 < sda5 > [ 1.278971] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.280194] Freeing unused kernel image (initmem) memory: 1576K [ 1.280322] Write protecting the kernel read-only data: 22528k [ 1.286865] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.287020] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.287143] usb 3-3: Product: USB2.0 Hub [ 1.287847] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.287998] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.288256] hub 3-3:1.0: USB hub found [ 1.288401] hub 2-1:1.0: USB hub found [ 1.288607] hub 2-1:1.0: 4 ports detected [ 1.288826] hub 3-3:1.0: 4 ports detected [ 1.298231] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.299516] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.404491] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.530724] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.530881] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.531514] hub 3-4:1.0: USB hub found [ 1.531716] hub 3-4:1.0: 4 ports detected [ 1.594489] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.671789] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.671943] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.672087] usb 3-3.2: Product: USB2.0 Hub [ 1.672715] hub 3-3.2:1.0: USB hub found [ 1.673120] hub 3-3.2:1.0: 4 ports detected [ 1.760810] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.760936] Run /init as init process [ 1.761051] with arguments: [ 1.761052] /init [ 1.761053] placeholder [ 1.761054] with environment: [ 1.761055] HOME=/ [ 1.761056] TERM=linux [ 1.826531] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.930870] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.931032] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.936825] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 1.988754] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 1.991668] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 1.992010] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.205664] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.205835] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.206220] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.206524] xen: registering gsi 16 triggering 0 polarity 1 [ 2.206539] Already setup the GSI :16 [ 2.208899] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.209024] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.209234] xen: registering gsi 16 triggering 0 polarity 1 [ 2.209243] Already setup the GSI :16 [ 2.236114] pps pps0: new PPS source ptp0 [ 2.236294] igb 0000:07:00.0: added PHC on eth0 [ 2.236427] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.236570] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.236744] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.236860] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.237104] xen: registering gsi 17 triggering 0 polarity 1 [ 2.237113] Already setup the GSI :17 [ 2.266724] pps pps1: new PPS source ptp1 [ 2.266942] igb 0000:08:00.0: added PHC on eth1 [ 2.267090] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.267261] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.267440] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.267572] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.267803] xen: registering gsi 16 triggering 0 polarity 1 [ 2.267811] Already setup the GSI :16 [ 2.325346] igb 0000:0b:00.0: added PHC on eth2 [ 2.325514] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.325635] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.325838] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.325953] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.326180] xen: registering gsi 17 triggering 0 polarity 1 [ 2.326188] Already setup the GSI :17 [ 2.384384] igb 0000:0b:00.1: added PHC on eth3 [ 2.384549] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.384672] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.384876] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.385028] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.385263] xen: registering gsi 18 triggering 0 polarity 1 [ 2.385270] Already setup the GSI :18 [ 2.443072] igb 0000:0b:00.2: added PHC on eth4 [ 2.443232] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.443370] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.443590] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.443709] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.443953] xen: registering gsi 19 triggering 0 polarity 1 [ 2.443962] Already setup the GSI :19 [ 2.499477] igb 0000:0b:00.3: added PHC on eth5 [ 2.499614] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.499735] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.499938] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.500053] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.503283] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.510986] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.526857] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.534810] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.547032] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.554711] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 2.944572] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.074364] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.074516] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.363420] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.363760] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.363979] xen: registering gsi 17 triggering 0 polarity 1 [ 3.363990] Already setup the GSI :17 [ 4.106605] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.236447] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.236625] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.533646] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.536229] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.544999] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 4.954898] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 4.963021] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.684479] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.819895] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.840504] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.927234] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.481377] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.481561] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.481737] device enx0cc47a9f87be entered promiscuous mode [ 14.992090] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 15.093831] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 15.094067] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 15.094191] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 15.094482] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready