[ 0.000000] Linux version 6.1.95+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Thu Jun 27 04:14:47 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000461] tsc: Detected 2199.998 MHz processor [ 0.000904] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000908] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000915] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000916] Disabled [ 0.000917] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000922] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000961] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027741] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.027749] ACPI: Early table checksum verification disabled [ 0.028349] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028360] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028397] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028445] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028461] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028477] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028493] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028509] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028525] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028541] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028558] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028574] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028590] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028606] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028622] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028638] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028654] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028670] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028691] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028706] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028723] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028739] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028747] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028749] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028750] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028751] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028752] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028753] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028754] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028755] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028756] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028757] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028758] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028759] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028760] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028761] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028761] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028762] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028763] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028764] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028765] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028766] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028811] Setting APIC routing to Xen PV. [ 0.032764] Zone ranges: [ 0.032765] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032768] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032770] Normal empty [ 0.032771] Movable zone start for each node [ 0.032772] Early memory node ranges [ 0.032772] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032774] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032776] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032781] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032818] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034364] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034369] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221875] Remapped 102 page(s) [ 0.223248] ACPI: PM-Timer IO Port: 0x408 [ 0.223301] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223304] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223306] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223307] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223309] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223310] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223311] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223313] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223341] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223355] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223358] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223383] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223388] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223458] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223473] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223475] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223476] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223478] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223483] Booting kernel on Xen [ 0.223483] Xen version: 4.19-unstable (preserve-AD) [ 0.223487] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229738] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.230021] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.230028] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.230031] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230110] xen: PV spinlocks enabled [ 0.230113] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230118] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230121] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230159] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230168] random: crng init done [ 0.230217] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230242] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231562] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231565] software IO TLB: area num 8. [ 0.291101] Memory: 390032K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1576K init, 1296K bss, 134000K reserved, 0K cma-reserved) [ 0.291269] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.293779] Dynamic Preempt: voluntary [ 0.293878] rcu: Preemptible hierarchical RCU implementation. [ 0.293879] rcu: RCU event tracing is enabled. [ 0.293880] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.293882] Trampoline variant of Tasks RCU enabled. [ 0.293883] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.293884] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.304380] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.304505] xen:events: Using FIFO-based ABI [ 0.304529] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.304537] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.304545] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.304552] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.304560] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.304567] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.304575] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.304582] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.304589] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.304597] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.304604] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.304612] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.304619] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.304628] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.304635] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.304646] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.310007] Console: colour VGA+ 80x25 [ 0.324676] printk: console [tty0] enabled [ 0.326011] printk: console [hvc0] enabled [ 0.326148] ACPI: Core revision 20220331 [ 0.341633] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.341800] Xen: using vcpuop timer interface [ 0.341807] installing Xen timer for CPU 0 [ 0.341957] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.342114] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199998) [ 0.342442] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.342559] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.342685] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.342833] Spectre V2 : Mitigation: Retpolines [ 0.343121] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.343279] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.343398] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.343518] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.343666] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.343783] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.343934] MDS: Mitigation: Clear CPU buffers [ 0.344046] TAA: Mitigation: Clear CPU buffers [ 0.344118] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.344283] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.344427] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.344552] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.344671] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.344790] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.362525] Freeing SMP alternatives memory: 40K [ 0.362651] pid_max: default: 32768 minimum: 301 [ 0.363137] LSM: Security Framework initializing [ 0.363258] SELinux: Initializing. [ 0.363398] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363550] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364206] cpu 0 spinlock event irq 25 [ 0.364325] VPMU disabled by hypervisor. [ 0.364759] cblist_init_generic: Setting adjustable number of callback queues. [ 0.364904] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.365060] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.365119] signal: max sigframe size: 1776 [ 0.365282] rcu: Hierarchical SRCU implementation. [ 0.365415] rcu: Max phase no-delay instances is 400. [ 0.365908] smp: Bringing up secondary CPUs ... [ 0.366242] installing Xen timer for CPU 1 [ 0.366711] cpu 1 spinlock event irq 35 [ 0.367255] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.367422] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.367609] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.368336] installing Xen timer for CPU 2 [ 0.368806] cpu 2 spinlock event irq 41 [ 0.369237] installing Xen timer for CPU 3 [ 0.369669] cpu 3 spinlock event irq 47 [ 0.369669] installing Xen timer for CPU 4 [ 0.370456] cpu 4 spinlock event irq 53 [ 0.370456] installing Xen timer for CPU 5 [ 0.371280] cpu 5 spinlock event irq 59 [ 0.371320] installing Xen timer for CPU 6 [ 0.372157] cpu 6 spinlock event irq 65 [ 0.372368] installing Xen timer for CPU 7 [ 0.372820] cpu 7 spinlock event irq 71 [ 0.373381] smp: Brought up 1 node, 8 CPUs [ 0.373498] smpboot: Max logical packages: 1 [ 0.373717] devtmpfs: initialized [ 0.373717] x86/mm: Memory block size: 128MB [ 0.374353] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.374384] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.374555] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.374807] PM: RTC time: 06:05:06, date: 2024-06-27 [ 0.375371] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.375516] xen:grant_table: Grant tables using version 1 layout [ 0.375653] Grant table initialized [ 0.375958] audit: initializing netlink subsys (disabled) [ 0.376137] audit: type=2000 audit(1719468307.045:1): state=initialized audit_enabled=0 res=1 [ 0.376187] thermal_sys: Registered thermal governor 'step_wise' [ 0.376187] thermal_sys: Registered thermal governor 'user_space' [ 0.376341] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.376778] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.377122] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.504281] PCI: Using configuration type 1 for base access [ 0.506912] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.507193] ACPI: Added _OSI(Module Device) [ 0.507282] ACPI: Added _OSI(Processor Device) [ 0.507395] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.507509] ACPI: Added _OSI(Processor Aggregator Device) [ 0.537997] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.539974] xen: registering gsi 9 triggering 0 polarity 0 [ 0.542627] ACPI: Dynamic OEM Table Load: [ 0.549940] ACPI: Interpreter enabled [ 0.550073] ACPI: PM: (supports S0 S4 S5) [ 0.550118] ACPI: Using IOAPIC for interrupt routing [ 0.550304] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.550454] PCI: Using E820 reservations for host bridge windows [ 0.551022] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.584779] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.584907] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.585153] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.585419] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.585539] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.585714] PCI host bridge to bus 0000:ff [ 0.585827] pci_bus 0000:ff: root bus resource [bus ff] [ 0.586059] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.586446] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.586872] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.587334] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.587773] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.588197] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.588656] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.589076] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.589447] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.589921] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.590344] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.590768] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.591236] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.591657] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.592091] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.592420] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.592879] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.593308] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.593562] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.594059] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.594470] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.594942] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.595448] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.595913] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.596380] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.596876] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.597300] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.597731] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.598240] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.598705] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.599175] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.599672] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.600095] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.600423] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.600885] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.601319] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.601785] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.602292] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.602757] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.603276] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.603737] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.604164] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.604595] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.604883] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.605319] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.605745] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.606205] pci_bus 0000:ff: on NUMA node 0 [ 0.610647] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.610774] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.611048] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.612341] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.612462] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.612978] PCI host bridge to bus 0000:00 [ 0.613091] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.613118] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.613238] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.613382] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.613526] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.613704] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.614380] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.614899] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.615314] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.615834] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.616219] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.616774] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.617131] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.617646] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.618059] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.618523] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.618892] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.619453] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.619824] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.620402] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.621065] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.621664] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.621881] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.622382] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.622726] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.622943] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.623445] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.623748] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.623966] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.624430] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.624828] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.625025] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.625532] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.625851] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.626435] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.626635] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.626756] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.634286] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.634844] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.635039] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.635125] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.635455] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.636008] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.636193] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.636315] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.636599] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.637192] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.637386] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.637507] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.637829] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.638065] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.638533] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.638854] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.639647] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.639840] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.639998] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.640158] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.640316] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.640473] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.640630] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.640980] pci 0000:00:1f.2: PME# supported from D3hot [ 0.641261] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.641478] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.641723] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.642143] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.642361] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.643074] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.643295] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.643665] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.643876] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.644633] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.644885] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.645592] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.645804] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.646512] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.646724] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.647422] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.647596] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.647935] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.648146] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.648430] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.648614] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.649003] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.649219] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.649340] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.649543] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.649663] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.650278] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.650491] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.650775] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.650958] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.651307] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.651509] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.651668] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.651870] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.651990] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.652519] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.652654] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.652791] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.653124] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.653415] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.653777] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.653896] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.654102] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.654254] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.654419] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.654948] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.655408] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.655534] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.655701] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.656052] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.656118] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.656323] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.656539] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.656704] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.657274] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.657738] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.657863] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.657991] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.658371] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.658763] pci 0000:09:00.0: enabling Extended Tags [ 0.659102] pci 0000:09:00.0: supports D1 D2 [ 0.659117] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.659472] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.659637] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.659765] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.660066] pci_bus 0000:0a: extended config space not accessible [ 0.660170] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.660375] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.660542] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.660708] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.661100] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.661259] pci 0000:0a:00.0: supports D1 D2 [ 0.661372] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.661807] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.661945] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.662074] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.662384] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.662584] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.662792] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.662953] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.663506] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.663744] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.663889] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.664106] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.664249] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.664849] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.665049] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.665207] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.665368] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.665878] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.666147] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.666291] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.666508] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.666651] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.667171] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.667371] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.667619] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.667780] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.668289] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.668517] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.668661] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.668917] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.669061] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.669486] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.669687] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.669895] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.670056] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.670509] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.670738] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.670882] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.671099] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.671117] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.671736] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.671862] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.671990] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.672131] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.672599] pci_bus 0000:00: on NUMA node 0 [ 0.672734] xen: registering gsi 13 triggering 1 polarity 0 [ 0.673708] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.673904] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.674139] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.674329] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.674519] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.674637] ACPI: PCI: Interrupt link LNKE disabled [ 0.674820] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.674938] ACPI: PCI: Interrupt link LNKF disabled [ 0.675126] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.675245] ACPI: PCI: Interrupt link LNKG disabled [ 0.675469] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.675587] ACPI: PCI: Interrupt link LNKH disabled [ 0.675851] xen:balloon: Initialising balloon driver [ 0.676204] iommu: Default domain type: Translated [ 0.684118] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.684302] SCSI subsystem initialized [ 0.684428] libata version 3.00 loaded. [ 0.684428] ACPI: bus type USB registered [ 0.684428] usbcore: registered new interface driver usbfs [ 0.684428] usbcore: registered new interface driver hub [ 0.684523] usbcore: registered new device driver usb [ 0.684650] pps_core: LinuxPPS API ver. 1 registered [ 0.685118] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.685269] PTP clock support registered [ 0.685404] Advanced Linux Sound Architecture Driver Initialized. [ 0.685408] NetLabel: Initializing [ 0.685519] NetLabel: domain hash size = 128 [ 0.685631] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.686135] NetLabel: unlabeled traffic allowed by default [ 0.686273] PCI: Using ACPI for IRQ routing [ 0.721112] PCI: pci_cache_line_size set to 64 bytes [ 0.722343] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.722346] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.723154] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.723275] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.723392] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.723540] vgaarb: loaded [ 0.725116] clocksource: Switched to clocksource tsc-early [ 0.725192] VFS: Disk quotas dquot_6.6.0 [ 0.725192] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.725629] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.725786] pnp: PnP ACPI init [ 0.726310] xen: registering gsi 8 triggering 1 polarity 0 [ 0.726504] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.726629] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.726748] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.726866] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.726984] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.727101] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.727242] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.727365] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.727523] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.727643] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.727762] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.727881] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.728001] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.728428] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.728552] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.728670] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.728788] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.728945] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.729390] xen: registering gsi 4 triggering 1 polarity 0 [ 0.729396] Already setup the GSI :4 [ 0.729508] pnp 00:03: [dma 0 disabled] [ 0.729818] xen: registering gsi 3 triggering 1 polarity 0 [ 0.729829] pnp 00:04: [dma 0 disabled] [ 0.730481] pnp: PnP ACPI: found 5 devices [ 0.762842] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.763034] NET: Registered PF_INET protocol family [ 0.763227] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.763634] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.763784] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.763930] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.764080] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.764275] TCP: Hash tables configured (established 4096 bind 4096) [ 0.764444] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.764593] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.764745] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.765170] RPC: Registered named UNIX socket transport module. [ 0.765295] RPC: Registered udp transport module. [ 0.765408] RPC: Registered tcp transport module. [ 0.765521] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.766081] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.766309] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.766472] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.766633] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.766779] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.766953] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.767137] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.767284] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.767449] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.767572] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.767754] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.767897] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.768042] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.768186] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.768340] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.768483] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.768628] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.768749] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.768893] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.769075] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.769242] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.769366] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.769510] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.769653] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.769797] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.769932] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.770065] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.770263] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.770478] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.770652] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.770771] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.770910] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.771071] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.771217] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.771358] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.771520] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.771640] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.771780] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.771985] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.772105] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.772264] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.772444] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.772601] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.772758] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.772909] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.773061] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.773273] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.773428] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.773580] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.773733] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.773852] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.773991] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.774136] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.774323] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.774473] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.774632] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.774751] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.774871] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.774991] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.775110] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.775252] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.775398] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.775514] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.775632] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.775748] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.775866] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.776021] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.776155] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.776287] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.776408] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.776523] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.776642] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.777215] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.777475] xen: registering gsi 19 triggering 0 polarity 1 [ 0.777502] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.786341] xen: registering gsi 18 triggering 0 polarity 1 [ 0.786362] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.803292] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 16605 usecs [ 0.803537] xen: registering gsi 18 triggering 0 polarity 1 [ 0.803542] Already setup the GSI :18 [ 0.820465] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 16585 usecs [ 0.820678] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.820820] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.820891] Unpacking initramfs... [ 0.820939] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.821323] kvm: no hardware support for 'kvm_intel' [ 0.829088] has_svm: not amd or hygon [ 0.829228] kvm: no hardware support for 'kvm_amd' [ 0.829379] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.829622] clocksource: Switched to clocksource tsc [ 0.832054] Initialise system trusted keyrings [ 0.832350] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.833804] NFS: Registering the id_resolver key type [ 0.833928] Key type id_resolver registered [ 0.834039] Key type id_legacy registered [ 0.834239] 9p: Installing v9fs 9p2000 file system support [ 0.848151] Key type asymmetric registered [ 0.848276] Asymmetric key parser 'x509' registered [ 0.848413] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.848577] io scheduler mq-deadline registered [ 0.848691] io scheduler kyber registered [ 0.849750] xen: registering gsi 16 triggering 0 polarity 1 [ 0.849781] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.850340] xen: registering gsi 16 triggering 0 polarity 1 [ 0.850346] Already setup the GSI :16 [ 0.850986] xen: registering gsi 16 triggering 0 polarity 1 [ 0.850991] Already setup the GSI :16 [ 0.851312] xen: registering gsi 16 triggering 0 polarity 1 [ 0.851316] Already setup the GSI :16 [ 0.851683] xen: registering gsi 16 triggering 0 polarity 1 [ 0.851687] Already setup the GSI :16 [ 0.852266] xen: registering gsi 16 triggering 0 polarity 1 [ 0.852271] Already setup the GSI :16 [ 0.852857] xen: registering gsi 16 triggering 0 polarity 1 [ 0.852862] Already setup the GSI :16 [ 0.853331] xen: registering gsi 17 triggering 0 polarity 1 [ 0.853348] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.853696] xen: registering gsi 19 triggering 0 polarity 1 [ 0.853701] Already setup the GSI :19 [ 0.854137] xen: registering gsi 16 triggering 0 polarity 1 [ 0.854141] Already setup the GSI :16 [ 0.854843] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.855017] ACPI: button: Power Button [PWRB] [ 0.855160] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.855389] ACPI: button: Power Button [PWRF] [ 0.855683] Monitor-Mwait will be used to enter C-1 state [ 0.855718] Monitor-Mwait will be used to enter C-2 state [ 0.855734] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.856222] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.856626] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.857161] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.869755] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.870196] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.870703] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.871211] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.872052] xen:xen_evtchn: Event-channel device installed [ 0.872248] xen_pciback: backend is vpci [ 0.873011] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.873320] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.874057] hpet_acpi_add: no address or irqs in _CRS [ 0.874296] Non-volatile memory driver v1.3 [ 0.874409] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.876938] loop: module loaded [ 0.883296] ahci 0000:00:1f.2: version 3.0 [ 0.883402] xen: registering gsi 16 triggering 0 polarity 1 [ 0.883416] Already setup the GSI :16 [ 0.883767] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.883918] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.899096] scsi host0: ahci [ 0.899473] scsi host1: ahci [ 0.899859] scsi host2: ahci [ 0.900185] scsi host3: ahci [ 0.900565] scsi host4: ahci [ 0.900912] scsi host5: ahci [ 0.901060] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 0.901206] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 0.901350] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 0.901509] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 0.901653] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 0.901796] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 0.902231] tun: Universal TUN/TAP device driver, 1.6 [ 0.902518] e100: Intel(R) PRO/100 Network Driver [ 0.902666] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.902806] sky2: driver version 1.30 [ 0.903016] xen_netfront: Initialising Xen virtual ethernet driver [ 0.903380] xen: registering gsi 18 triggering 0 polarity 1 [ 0.903390] Already setup the GSI :18 [ 0.903609] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.903802] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.903977] ehci-pci 0000:00:1a.0: debug port 2 [ 0.908107] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.914538] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.914777] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.914925] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.915069] usb usb1: Product: EHCI Host Controller [ 0.915183] usb usb1: Manufacturer: Linux 6.1.95+ ehci_hcd [ 0.915298] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.915642] hub 1-0:1.0: USB hub found [ 0.915766] hub 1-0:1.0: 2 ports detected [ 0.916139] xen: registering gsi 18 triggering 0 polarity 1 [ 0.916149] Already setup the GSI :18 [ 0.916341] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.916546] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.916726] ehci-pci 0000:00:1d.0: debug port 2 [ 0.920818] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.925911] Freeing initrd memory: 19884K [ 0.927579] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.927926] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.928073] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.928216] usb usb2: Product: EHCI Host Controller [ 0.928331] usb usb2: Manufacturer: Linux 6.1.95+ ehci_hcd [ 0.928446] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.928753] hub 2-0:1.0: USB hub found [ 0.928878] hub 2-0:1.0: 2 ports detected [ 0.929311] xen: registering gsi 19 triggering 0 polarity 1 [ 0.929320] Already setup the GSI :19 [ 0.929541] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.929736] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.930948] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.931415] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.931607] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.931754] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.931956] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.932112] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.932255] usb usb3: Product: xHCI Host Controller [ 0.932368] usb usb3: Manufacturer: Linux 6.1.95+ xhci-hcd [ 0.932499] usb usb3: SerialNumber: 0000:00:14.0 [ 0.932779] hub 3-0:1.0: USB hub found [ 0.932911] hub 3-0:1.0: 8 ports detected [ 0.934052] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.934203] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.934346] usb usb4: Product: xHCI Host Controller [ 0.934459] usb usb4: Manufacturer: Linux 6.1.95+ xhci-hcd [ 0.934587] usb usb4: SerialNumber: 0000:00:14.0 [ 0.934828] hub 4-0:1.0: USB hub found [ 0.934959] hub 4-0:1.0: 6 ports detected [ 0.936036] usbcore: registered new interface driver usblp [ 0.936177] usbcore: registered new interface driver usb-storage [ 0.936321] i8042: PNP: No PS/2 controller found. [ 0.936681] rtc_cmos 00:00: RTC can wake from S4 [ 0.937314] rtc_cmos 00:00: registered as rtc0 [ 0.937530] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.937725] device-mapper: uevent: version 1.0.3 [ 0.937816] xen: registering gsi 18 triggering 0 polarity 1 [ 0.937845] Already setup the GSI :18 [ 0.937937] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.937987] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.938109] intel_pstate: CPU model not supported [ 0.938140] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.938240] hid: raw HID events driver (C) Jiri Kosina [ 0.938705] usbcore: registered new interface driver usbhid [ 0.938778] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.938822] usbhid: USB HID core driver [ 0.939508] Initializing XFRM netlink socket [ 0.939755] NET: Registered PF_INET6 protocol family [ 0.940346] Segment Routing with IPv6 [ 0.940482] In-situ OAM (IOAM) with IPv6 [ 0.940629] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.940870] NET: Registered PF_PACKET protocol family [ 0.941025] 9pnet: Installing 9P2000 support [ 0.941150] Key type dns_resolver registered [ 0.941888] IPI shorthand broadcast: enabled [ 0.942026] sched_clock: Marking stable (904386291, 37463720)->(1787205898, -845355887) [ 0.942603] registered taskstats version 1 [ 0.942719] Loading compiled-in X.509 certificates [ 0.945345] PM: Magic number: 12:177:65 [ 0.945587] printk: console [netcon0] enabled [ 0.945703] netconsole: network logging started [ 0.946044] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.958607] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.958948] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.959547] ALSA device list: [ 0.959626] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.959678] No soundcards found. [ 1.152507] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.168548] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.176527] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.211889] ata4: SATA link down (SStatus 0 SControl 300) [ 1.212025] ata1: SATA link down (SStatus 0 SControl 300) [ 1.213726] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.213918] ata5: SATA link down (SStatus 0 SControl 300) [ 1.214055] ata6: SATA link down (SStatus 0 SControl 300) [ 1.214194] ata2: SATA link down (SStatus 0 SControl 300) [ 1.215073] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.242761] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.242890] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.270758] ata3.00: configured for UDMA/133 [ 1.271124] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.272037] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.272130] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.272352] sd 2:0:0:0: [sda] Write Protect is off [ 1.272490] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.272559] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.272796] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.288044] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.288198] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.288595] hub 1-1:1.0: USB hub found [ 1.288792] hub 1-1:1.0: 4 ports detected [ 1.291935] sda: sda1 sda2 < sda5 > [ 1.292317] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.293541] Freeing unused kernel image (initmem) memory: 1576K [ 1.293669] Write protecting the kernel read-only data: 22528k [ 1.296919] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.297073] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.297466] hub 2-1:1.0: USB hub found [ 1.297668] hub 2-1:1.0: 4 ports detected [ 1.304042] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.304197] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.304320] usb 3-3: Product: USB2.0 Hub [ 1.305088] hub 3-3:1.0: USB hub found [ 1.305531] hub 3-3:1.0: 4 ports detected [ 1.311620] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.312878] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.421510] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.547770] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.547921] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.548547] hub 3-4:1.0: USB hub found [ 1.548758] hub 3-4:1.0: 4 ports detected [ 1.613508] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.691920] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.692074] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.692218] usb 3-3.2: Product: USB2.0 Hub [ 1.692882] hub 3-3.2:1.0: USB hub found [ 1.693342] hub 3-3.2:1.0: 4 ports detected [ 1.774542] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.774668] Run /init as init process [ 1.774777] with arguments: [ 1.774778] /init [ 1.774780] placeholder [ 1.774781] with environment: [ 1.774782] HOME=/ [ 1.774783] TERM=linux [ 1.843528] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.947891] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.948053] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.954024] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 2.005805] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 2.008669] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 2.008981] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.216215] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.216402] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.216841] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.217083] xen: registering gsi 16 triggering 0 polarity 1 [ 2.217092] Already setup the GSI :16 [ 2.220690] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.220815] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.221020] xen: registering gsi 16 triggering 0 polarity 1 [ 2.221029] Already setup the GSI :16 [ 2.247123] pps pps0: new PPS source ptp0 [ 2.247306] igb 0000:07:00.0: added PHC on eth0 [ 2.247439] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.247579] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.247745] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.247860] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.248100] xen: registering gsi 17 triggering 0 polarity 1 [ 2.248109] Already setup the GSI :17 [ 2.277699] pps pps1: new PPS source ptp1 [ 2.277897] igb 0000:08:00.0: added PHC on eth1 [ 2.278030] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.278150] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.278315] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.278435] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.278675] xen: registering gsi 16 triggering 0 polarity 1 [ 2.278683] Already setup the GSI :16 [ 2.336563] igb 0000:0b:00.0: added PHC on eth2 [ 2.336709] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.336830] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.337033] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.337148] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.337376] xen: registering gsi 17 triggering 0 polarity 1 [ 2.337384] Already setup the GSI :17 [ 2.395658] igb 0000:0b:00.1: added PHC on eth3 [ 2.395796] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.395921] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.396127] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.396246] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.396526] xen: registering gsi 18 triggering 0 polarity 1 [ 2.396535] Already setup the GSI :18 [ 2.453548] igb 0000:0b:00.2: added PHC on eth4 [ 2.453691] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.453812] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.454015] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.454130] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.454374] xen: registering gsi 19 triggering 0 polarity 1 [ 2.454383] Already setup the GSI :19 [ 2.512657] igb 0000:0b:00.3: added PHC on eth5 [ 2.512802] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.512923] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.513126] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.513241] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.516598] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.531037] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.540707] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.554040] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.571685] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.580993] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 2.950907] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.079891] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.080033] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.372524] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.372848] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.373067] xen: registering gsi 17 triggering 0 polarity 1 [ 3.373078] Already setup the GSI :17 [ 4.114107] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.243852] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.244093] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.544646] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.547124] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 4.558960] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.969258] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 4.977205] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.690539] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.762219] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.787116] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.865726] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.455743] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.455943] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.456116] device enx0cc47a9f87be entered promiscuous mode [ 15.040062] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 15.246863] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 15.247120] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 15.247243] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 15.247538] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready