[ 0.000000] Linux version 6.10.0-rc5+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Thu Jun 27 08:29:27 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/pinot0--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000f6000000-0x00000000f6003fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SML/H8SML, BIOS 3.5 11/25/2013 [ 0.000000] DMI: Memory slots populated: 2/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000011] Xen PV: Detected 4 vCPUS [ 0.000460] tsc: Detected 2800.022 MHz processor [ 0.000684] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000688] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000696] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000700] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.000702] MTRRs set to read-only [ 0.000706] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.026831] RAMDISK: [mem 0x04000000-0x053b7fff] [ 0.026855] ACPI: Early table checksum verification disabled [ 0.027989] ACPI: RSDP 0x00000000000FA1C0 000024 (v02 ACPIAM) [ 0.028000] ACPI: XSDT 0x00000000DFEA0100 00007C (v01 SMCI 20131125 MSFT 00000097) [ 0.028035] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.028084] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20240322/tbfadt-560) [ 0.028095] ACPI: DSDT 0x00000000DFEA0600 00562B (v01 1CF11 1CF11000 00000000 INTL 20051117) [ 0.028106] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.028116] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.028126] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.028137] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.028148] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.028159] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.028170] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.028181] ACPI: SSDT 0x00000000DFEAA6F0 000B9C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.028192] ACPI: EINJ 0x00000000DFEAB290 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.028203] ACPI: BERT 0x00000000DFEAB420 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.028213] ACPI: ERST 0x00000000DFEAB450 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.028224] ACPI: HEST 0x00000000DFEAB660 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.028230] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.028232] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c2a] [ 0.028234] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.028235] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.028236] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.028238] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.028239] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.028240] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.028241] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.028243] ACPI: Reserving SSDT table memory at [mem 0xdfeaa6f0-0xdfeab28b] [ 0.028244] ACPI: Reserving EINJ table memory at [mem 0xdfeab290-0xdfeab3bf] [ 0.028245] ACPI: Reserving BERT table memory at [mem 0xdfeab420-0xdfeab44f] [ 0.028246] ACPI: Reserving ERST table memory at [mem 0xdfeab450-0xdfeab65f] [ 0.028247] ACPI: Reserving HEST table memory at [mem 0xdfeab660-0xdfeab707] [ 0.028366] APIC: Switched APIC routing to: Xen PV [ 0.030643] Zone ranges: [ 0.030645] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.030648] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.030650] Normal empty [ 0.030651] Movable zone start for each node [ 0.030652] Early memory node ranges [ 0.030653] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.030656] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.030658] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.030669] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.030749] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034888] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034919] p2m virtual area at (____ptrval____), size is 40000000 [ 0.255394] Remapped 102 page(s) [ 0.255926] ACPI: PM-Timer IO Port: 0x808 [ 0.255959] CPU topo: CPU limit of 4 reached. Ignoring further CPUs [ 0.255990] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.255995] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.256018] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.256026] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.256038] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.256043] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.256067] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.256071] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.256084] CPU topo: Max. logical packages: 1 [ 0.256086] CPU topo: Max. logical dies: 1 [ 0.256087] CPU topo: Max. dies per package: 1 [ 0.256094] CPU topo: Max. threads per core: 1 [ 0.256096] CPU topo: Num. cores per package: 4 [ 0.256097] CPU topo: Num. threads per package: 4 [ 0.256098] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.256099] CPU topo: Rejected CPUs 4 [ 0.256117] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.256120] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.256122] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.256125] [mem 0x20066000-0xdfe9dfff] available for PCI devices [ 0.256129] Booting kernel on Xen [ 0.256130] Xen version: 4.19-unstable (preserve-AD) [ 0.256135] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.262574] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.263496] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u524288 [ 0.263507] pcpu-alloc: s194408 r8192 d30872 u524288 alloc=1*2097152 [ 0.263512] pcpu-alloc: [0] 0 1 2 3 [ 0.263591] xen: PV spinlocks enabled [ 0.263596] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.263600] Kernel command line: placeholder root=/dev/mapper/pinot0--vg-root ro console=hvc0 [ 0.263676] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.263881] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.263979] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.264190] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.264195] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.264199] software IO TLB: area num 4. [ 0.370408] Memory: 386444K/524284K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 137588K reserved, 0K cma-reserved) [ 0.370534] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.373346] Dynamic Preempt: voluntary [ 0.373458] rcu: Preemptible hierarchical RCU implementation. [ 0.373460] rcu: RCU event tracing is enabled. [ 0.373461] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.373464] Trampoline variant of Tasks RCU enabled. [ 0.373465] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.373466] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.373487] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.380288] NR_IRQS: 4352, nr_irqs: 1000, preallocated irqs: 16 [ 0.380445] xen:events: Using FIFO-based ABI [ 0.380474] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.380486] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.380491] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.380497] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.380502] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.380508] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.380513] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.380518] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.380524] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.380529] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.380534] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.380540] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.380545] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.380550] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.380555] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.380567] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.386684] Console: colour VGA+ 80x25 [ 0.386688] printk: legacy console [tty0] enabled [ 0.400202] printk: legacy console [hvc0] enabled [ 0.400889] ACPI: Core revision 20240322 [ 0.404852] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.405010] Xen: using vcpuop timer interface [ 0.405016] installing Xen timer for CPU 0 [ 0.405262] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c55904d1, max_idle_ns: 440795315316 ns [ 0.405446] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.04 BogoMIPS (lpj=2800022) [ 0.405639] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.405836] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.405946] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.406061] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.406455] Spectre V2 : Mitigation: Retpolines [ 0.406558] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.406701] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.406836] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.406946] RETBleed: Mitigation: untrained return thunk [ 0.407052] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.407196] Speculative Store Bypass: Vulnerable [ 0.407320] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.407449] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.407559] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.407668] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.407778] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.433350] Freeing SMP alternatives memory: 40K [ 0.433453] pid_max: default: 32768 minimum: 301 [ 0.433598] LSM: initializing lsm=capability,selinux [ 0.433711] SELinux: Initializing. [ 0.433868] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.434013] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.434577] cpu 0 spinlock event irq 57 [ 0.434691] VPMU disabled by hypervisor. [ 0.435190] Performance Events: PMU not available due to virtualization, using software events only. [ 0.435351] signal: max sigframe size: 1776 [ 0.435503] rcu: Hierarchical SRCU implementation. [ 0.435606] rcu: Max phase no-delay instances is 400. [ 0.442233] smp: Bringing up secondary CPUs ... [ 0.442567] installing Xen timer for CPU 1 [ 0.442997] installing Xen timer for CPU 2 [ 0.443367] installing Xen timer for CPU 3 [ 0.025872] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0011 [ 0.443583] cpu 1 spinlock event irq 77 [ 0.025872] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0012 [ 0.444649] cpu 2 spinlock event irq 78 [ 0.025872] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0013 [ 0.445495] cpu 3 spinlock event irq 79 [ 0.446547] smp: Brought up 1 node, 4 CPUs [ 0.446944] devtmpfs: initialized [ 0.447505] x86/mm: Memory block size: 128MB [ 0.448169] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.448518] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.448675] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.449278] PM: RTC time: 09:41:48, date: 2024-06-27 [ 0.450254] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.450563] xen:grant_table: Grant tables using version 1 layout [ 0.450968] Grant table initialized [ 0.451729] audit: initializing netlink subsys (disabled) [ 0.451861] audit: type=2000 audit(1719481308.809:1): state=initialized audit_enabled=0 res=1 [ 0.452582] thermal_sys: Registered thermal governor 'step_wise' [ 0.452585] thermal_sys: Registered thermal governor 'user_space' [ 0.454575] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.455255] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.581025] PCI: Using configuration type 1 for base access [ 0.581493] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.582542] ACPI: Added _OSI(Module Device) [ 0.582645] ACPI: Added _OSI(Processor Device) [ 0.582754] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.582864] ACPI: Added _OSI(Processor Aggregator Device) [ 0.589210] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.589823] xen: registering gsi 9 triggering 0 polarity 1 [ 0.593594] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.593594] ACPI: Interpreter enabled [ 0.593734] ACPI: PM: (supports S0 S1 S4 S5) [ 0.593871] ACPI: Using IOAPIC for interrupt routing [ 0.594303] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.594465] PCI: Using E820 reservations for host bridge windows [ 0.595735] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.615614] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.615789] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.615945] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.616056] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.616225] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.616718] PCI host bridge to bus 0000:00 [ 0.616821] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.616934] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.617085] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.617226] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.617382] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.617448] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.617619] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.618190] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.619779] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.621491] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.621880] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.622206] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.622725] pci 0000:00:09.0: enabling Extended Tags [ 0.623792] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.625314] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.625981] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.626359] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.626500] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.627115] pci 0000:00:0a.0: enabling Extended Tags [ 0.628074] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.629405] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f conventional PCI endpoint [ 0.629738] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.630044] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.630444] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.630892] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.631217] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.631582] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.632123] pci 0000:00:11.0: set SATA to AHCI mode [ 0.633735] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.634204] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.636930] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.637485] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.639227] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.639730] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.641045] pci 0000:00:12.2: supports D1 D2 [ 0.641331] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.642381] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.642690] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.644386] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.645689] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.647502] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.648077] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.649435] pci 0000:00:13.2: supports D1 D2 [ 0.649725] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.651019] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.653303] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.653712] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.654047] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.654444] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.654852] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.655224] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.655754] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.656011] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.656309] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.656471] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.657731] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.658259] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.658529] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.658691] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.659039] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.659815] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.660006] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.660417] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.661143] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.662667] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.662989] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.663390] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.663620] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.664129] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.664323] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.664491] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.664631] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.664999] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.668529] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.668948] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.669143] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.669308] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.669479] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.669871] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.673535] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.673718] pci_bus 0000:03: extended config space not accessible [ 0.674056] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.674529] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.674969] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.675346] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.675593] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.676068] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.676202] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.676352] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.676466] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.678452] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.678605] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.678834] pci_bus 0000:00: on NUMA node 0 [ 0.679542] xen: registering gsi 13 triggering 1 polarity 0 [ 0.680043] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.680231] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.680419] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.680524] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.680774] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.680959] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.681142] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.681329] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.681600] xen:balloon: Initialising balloon driver [ 0.681894] iommu: Default domain type: Translated [ 0.682473] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.683142] SCSI subsystem initialized [ 0.683554] libata version 3.00 loaded. [ 0.683725] ACPI: bus type USB registered [ 0.684121] usbcore: registered new interface driver usbfs [ 0.684365] usbcore: registered new interface driver hub [ 0.684533] usbcore: registered new device driver usb [ 0.684898] pps_core: LinuxPPS API ver. 1 registered [ 0.685149] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.685489] PTP clock support registered [ 0.686609] Advanced Linux Sound Architecture Driver Initialized. [ 0.688419] NetLabel: Initializing [ 0.688726] NetLabel: domain hash size = 128 [ 0.688924] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.689340] NetLabel: unlabeled traffic allowed by default [ 0.690576] PCI: Using ACPI for IRQ routing [ 0.769444] PCI: pci_cache_line_size set to 64 bytes [ 0.769444] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.769444] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.770519] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.770587] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.770760] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.770906] vgaarb: loaded [ 0.772603] clocksource: Switched to clocksource tsc-early [ 0.773484] VFS: Disk quotas dquot_6.6.0 [ 0.773484] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.774939] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.775394] pnp: PnP ACPI init [ 0.776856] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.777887] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.779696] xen: registering gsi 8 triggering 1 polarity 0 [ 0.780797] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.781982] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.782305] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.783875] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.784202] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.784473] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.784730] system 00:05: [io 0x040b] has been reserved [ 0.785048] system 00:05: [io 0x04d6] has been reserved [ 0.785344] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.785546] system 00:05: [io 0x0c14] has been reserved [ 0.785811] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.786105] system 00:05: [io 0x0c52] has been reserved [ 0.786411] system 00:05: [io 0x0c6c] has been reserved [ 0.786665] system 00:05: [io 0x0c6f] has been reserved [ 0.786987] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.787281] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.787526] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.787824] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.788172] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.788464] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.788745] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.789030] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.789331] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.789581] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.789867] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.790158] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.790460] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.790723] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.792242] xen: registering gsi 4 triggering 1 polarity 0 [ 0.792274] Already setup the GSI :4 [ 0.792506] pnp 00:06: [dma 0 disabled] [ 0.793835] xen: registering gsi 3 triggering 1 polarity 0 [ 0.793880] pnp 00:07: [dma 0 disabled] [ 0.794741] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.796100] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.796623] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.796926] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.797239] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.797486] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.798398] pnp: PnP ACPI: found 10 devices [ 0.854848] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.855042] NET: Registered PF_INET protocol family [ 0.855246] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.855751] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.855930] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.856116] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.856274] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.856519] TCP: Hash tables configured (established 4096 bind 4096) [ 0.856724] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.856843] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.857035] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.857698] RPC: Registered named UNIX socket transport module. [ 0.857836] RPC: Registered udp transport module. [ 0.857940] RPC: Registered tcp transport module. [ 0.858043] RPC: Registered tcp-with-tls transport module. [ 0.858149] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.859965] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.860323] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.860601] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.860757] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.860866] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.860984] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.861115] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.861230] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.861348] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.861520] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.861669] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.861779] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.861891] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.862016] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.862128] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.862236] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.862346] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.862471] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.862618] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.862731] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.862843] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.862953] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.863069] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.863207] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.863319] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.864309] xen: registering gsi 16 triggering 0 polarity 1 [ 0.864532] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.528938] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 649556 usecs [ 1.529590] xen: registering gsi 16 triggering 0 polarity 1 [ 1.529600] Already setup the GSI :16 [ 1.552702] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 22636 usecs [ 1.552949] xen: registering gsi 17 triggering 0 polarity 1 [ 1.553004] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.553184] xen: registering gsi 18 triggering 0 polarity 1 [ 1.553207] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.578132] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 24409 usecs [ 1.578602] xen: registering gsi 18 triggering 0 polarity 1 [ 1.578611] Already setup the GSI :18 [ 1.602091] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 22997 usecs [ 1.602562] xen: registering gsi 19 triggering 0 polarity 1 [ 1.602611] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.602814] xen: registering gsi 18 triggering 0 polarity 1 [ 1.602818] Already setup the GSI :18 [ 1.626695] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 23373 usecs [ 1.626916] PCI: CLS 64 bytes, default 64 [ 1.627066] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.627178] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 1.627399] kvm_intel: VMX not supported by CPU 1 [ 1.627405] Unpacking initramfs... [ 1.627521] kvm_amd: SVM not supported by CPU 1 [ 1.627528] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c55904d1, max_idle_ns: 440795315316 ns [ 1.627992] clocksource: Switched to clocksource tsc [ 1.633256] Initialise system trusted keyrings [ 1.633894] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.634422] NFS: Registering the id_resolver key type [ 1.634566] Key type id_resolver registered [ 1.634686] Key type id_legacy registered [ 1.635000] 9p: Installing v9fs 9p2000 file system support [ 1.655499] Key type asymmetric registered [ 1.655674] Asymmetric key parser 'x509' registered [ 1.655849] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.656068] io scheduler mq-deadline registered [ 1.656177] io scheduler kyber registered [ 1.657653] xen: registering gsi 53 triggering 0 polarity 1 [ 1.657814] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.659650] xen: registering gsi 54 triggering 0 polarity 1 [ 1.659787] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.662022] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.662691] ACPI: button: Power Button [PWRB] [ 1.663359] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.664287] ACPI: button: Power Button [PWRF] [ 1.667177] ACPI: \_PR_.P001: Found 2 idle states [ 1.667805] ACPI: \_PR_.P002: Found 2 idle states [ 1.668274] ACPI: \_PR_.P003: Found 2 idle states [ 1.668805] ACPI: \_PR_.P004: Found 2 idle states [ 1.670032] xen:xen_evtchn: Event-channel device installed [ 1.670298] xen_pciback: backend is vpci [ 1.671852] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.672452] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.673923] hpet_acpi_add: no address or irqs in _CRS [ 1.674201] Non-volatile memory driver v1.3 [ 1.686216] loop: module loaded [ 1.714534] ahci 0000:00:11.0: version 3.0 [ 1.714690] xen: registering gsi 22 triggering 0 polarity 1 [ 1.714731] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.714940] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.715094] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.715206] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.717104] scsi host0: ahci [ 1.718195] scsi host1: ahci [ 1.718850] scsi host2: ahci [ 1.719729] scsi host3: ahci [ 1.720502] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 0 [ 1.720963] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 0 [ 1.721357] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 0 [ 1.721727] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 0 [ 1.722861] tun: Universal TUN/TAP device driver, 1.6 [ 1.723121] e100: Intel(R) PRO/100 Network Driver [ 1.723241] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.723362] sky2: driver version 1.30 [ 1.723521] xen_netfront: Initialising Xen virtual ethernet driver [ 1.723997] xen: registering gsi 16 triggering 0 polarity 1 [ 1.724006] Already setup the GSI :16 [ 1.724123] xen: registering gsi 17 triggering 0 polarity 1 [ 1.724130] Already setup the GSI :17 [ 1.724219] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.724897] xen: registering gsi 19 triggering 0 polarity 1 [ 1.724904] Already setup the GSI :19 [ 1.725590] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.726017] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.782123] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.782326] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.782468] usb usb1: Product: OHCI PCI host controller [ 1.782575] usb usb1: Manufacturer: Linux 6.10.0-rc5+ ohci_hcd [ 1.782683] usb usb1: SerialNumber: 0000:00:12.0 [ 1.783395] hub 1-0:1.0: USB hub found [ 1.783811] hub 1-0:1.0: 3 ports detected [ 1.784438] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.784530] xen: registering gsi 16 triggering 0 polarity 1 [ 1.784602] Already setup the GSI :16 [ 1.784806] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2 [ 1.784992] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.785174] ehci-pci 0000:00:12.2: debug port 1 [ 1.785443] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.791936] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.792169] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 1.792321] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.792469] usb usb2: Product: EHCI Host Controller [ 1.792579] usb usb2: Manufacturer: Linux 6.10.0-rc5+ ehci_hcd [ 1.792692] usb usb2: SerialNumber: 0000:00:12.2 [ 1.793352] hub 2-0:1.0: USB hub found [ 1.793558] hub 2-0:1.0: 6 ports detected [ 1.847449] hub 1-0:1.0: USB hub found [ 1.847960] hub 1-0:1.0: 3 ports detected [ 1.849308] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.849973] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 1.850148] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.850340] ehci-pci 0000:00:13.2: debug port 1 [ 1.850598] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 1.856954] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.857713] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 1.857902] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.858053] usb usb3: Product: EHCI Host Controller [ 1.858167] usb usb3: Manufacturer: Linux 6.10.0-rc5+ ehci_hcd [ 1.858285] usb usb3: SerialNumber: 0000:00:13.2 [ 1.858962] hub 3-0:1.0: USB hub found [ 1.859419] hub 3-0:1.0: 6 ports detected [ 1.860513] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.861025] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.861621] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 1.879007] Freeing initrd memory: 20192K [ 1.918332] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.918508] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.918674] usb usb4: Product: OHCI PCI host controller [ 1.918780] usb usb4: Manufacturer: Linux 6.10.0-rc5+ ohci_hcd [ 1.918902] usb usb4: SerialNumber: 0000:00:12.1 [ 1.919342] hub 4-0:1.0: USB hub found [ 1.919510] hub 4-0:1.0: 3 ports detected [ 1.920116] xen: registering gsi 18 triggering 0 polarity 1 [ 1.920126] Already setup the GSI :18 [ 1.920292] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.920546] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.920828] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 1.977616] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.978109] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.978455] usb usb5: Product: OHCI PCI host controller [ 1.978749] usb usb5: Manufacturer: Linux 6.10.0-rc5+ ohci_hcd [ 1.979156] usb usb5: SerialNumber: 0000:00:13.0 [ 1.980167] hub 5-0:1.0: USB hub found [ 1.980377] hub 5-0:1.0: 3 ports detected [ 1.982227] xen: registering gsi 18 triggering 0 polarity 1 [ 1.982256] Already setup the GSI :18 [ 1.982841] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.983604] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.984227] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 2.027292] ata4: SATA link down (SStatus 0 SControl 300) [ 2.028049] ata3: SATA link down (SStatus 0 SControl 300) [ 2.040201] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 2.040375] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.040516] usb usb6: Product: OHCI PCI host controller [ 2.040621] usb usb6: Manufacturer: Linux 6.10.0-rc5+ ohci_hcd [ 2.040728] usb usb6: SerialNumber: 0000:00:13.1 [ 2.041378] hub 6-0:1.0: USB hub found [ 2.041495] hub 6-0:1.0: 3 ports detected [ 2.042152] xen: registering gsi 18 triggering 0 polarity 1 [ 2.042166] Already setup the GSI :18 [ 2.042339] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.042584] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.042781] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 2.099162] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 2.099324] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.099491] usb usb7: Product: OHCI PCI host controller [ 2.099598] usb usb7: Manufacturer: Linux 6.10.0-rc5+ ohci_hcd [ 2.099744] usb usb7: SerialNumber: 0000:00:14.5 [ 2.100099] hub 7-0:1.0: USB hub found [ 2.100245] hub 7-0:1.0: 2 ports detected [ 2.100724] usbcore: registered new interface driver usblp [ 2.100854] usbcore: registered new interface driver usb-storage [ 2.101015] i8042: PNP: No PS/2 controller found. [ 2.101120] i8042: Probing ports directly. [ 2.104077] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.104186] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.104510] rtc_cmos 00:02: RTC can wake from S4 [ 2.105081] rtc_cmos 00:02: registered as rtc0 [ 2.105285] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 2.105442] device-mapper: uevent: version 1.0.3 [ 2.105659] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 2.105812] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 2.105983] hid: raw HID events driver (C) Jiri Kosina [ 2.106297] usbcore: registered new interface driver usbhid [ 2.106403] usbhid: USB HID core driver [ 2.106940] Initializing XFRM netlink socket [ 2.107076] NET: Registered PF_INET6 protocol family [ 2.107734] Segment Routing with IPv6 [ 2.107849] In-situ OAM (IOAM) with IPv6 [ 2.107997] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.108290] NET: Registered PF_PACKET protocol family [ 2.108421] 9pnet: Installing 9P2000 support [ 2.108538] Key type dns_resolver registered [ 2.108653] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 2.109224] IPI shorthand broadcast: enabled [ 2.113782] sched_clock: Marking stable (2088006230, 24872299)->(2121667890, -8789361) [ 2.114232] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 2.114529] registered taskstats version 1 [ 2.114630] Loading compiled-in X.509 certificates [ 2.116804] PM: Magic number: 12:116:678 [ 2.116978] printk: legacy console [netcon0] enabled [ 2.117083] netconsole: network logging started [ 2.117297] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.127809] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.128230] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 2.129124] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 2.129299] ALSA device list: [ 2.129398] No soundcards found. [ 2.180945] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.183385] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 2.183880] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.185830] ata1.00: configured for UDMA/133 [ 2.186143] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.187028] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.187075] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.187350] sd 0:0:0:0: [sda] Write Protect is off [ 2.187487] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.187512] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.187699] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.188986] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.189617] ata2.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133 [ 2.190184] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.190969] ata2.00: configured for UDMA/133 [ 2.191291] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5 [ 2.191851] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.191869] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.192122] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 2.192291] sd 1:0:0:0: [sdb] Write Protect is off [ 2.192401] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.192456] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.192706] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 2.210814] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.222468] sdb: sdb1 sdb2 < sdb5 > [ 2.222823] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.224437] Freeing unused kernel image (initmem) memory: 2680K [ 2.224580] Write protecting the kernel read-only data: 24576k [ 2.236769] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 2.348915] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.351936] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.352054] Run /init as init process [ 2.352159] with arguments: [ 2.352161] /init [ 2.352163] placeholder [ 2.352164] with environment: [ 2.352165] HOME=/ [ 2.352166] TERM=linux [ 2.516029] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.516190] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.516303] usb 6-2: Product: Hermon USB hidmouse Device [ 2.516409] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.522543] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.522857] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.526473] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.578294] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.623291] e1000e: Intel(R) PRO/1000 Network Driver [ 2.623414] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.623675] xen: registering gsi 48 triggering 0 polarity 1 [ 2.623714] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.624007] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.669850] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.713785] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e8:ac [ 2.713961] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.714158] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.714378] xen: registering gsi 47 triggering 0 polarity 1 [ 2.714411] xen: --> pirq=47 -> irq=47 (gsi=47) [ 2.714604] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.760985] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.766944] random: crng init done [ 2.805927] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e8:ad [ 2.806080] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.806270] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.808479] e1000e 0000:02:00.0 enx002590aee8ad: renamed from eth1 [ 2.809050] e1000e 0000:01:00.0 enx002590aee8ac: renamed from eth0 [ 3.560506] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.572721] EXT4-fs (dm-0): mounted filesystem 0749e743-ba29-42df-9a81-7657baac82fe ro with ordered data mode. Quota mode: none. [ 7.496755] EXT4-fs (dm-0): re-mounted 0749e743-ba29-42df-9a81-7657baac82fe r/w. Quota mode: none. [ 8.358698] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem [ 8.385650] EXT4-fs (sdb1): mounted filesystem 708ef7d7-aea3-487f-b026-bccefaa71ab8 r/w with ordered data mode. Quota mode: none. [ 8.453821] Adding 1949692k swap on /dev/mapper/pinot0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 9.995401] xenbr0: port 1(enx002590aee8ac) entered blocking state [ 9.995606] xenbr0: port 1(enx002590aee8ac) entered disabled state [ 9.995723] e1000e 0000:01:00.0 enx002590aee8ac: entered allmulticast mode [ 9.995892] e1000e 0000:01:00.0 enx002590aee8ac: entered promiscuous mode [ 13.096888] e1000e 0000:01:00.0 enx002590aee8ac: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 13.097473] xenbr0: port 1(enx002590aee8ac) entered blocking state [ 13.097584] xenbr0: port 1(enx002590aee8ac) entered forwarding state