[ 0.000000] Linux version 6.10.0-rc5+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Thu Jun 27 08:29:27 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/huxelrebe0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009cfff] usable [ 0.000000] Xen: [mem 0x000000000009d800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020062fff] usable [ 0.000000] Xen: [mem 0x00000000ca2b6000-0x00000000ca2bcfff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000ca70a000-0x00000000cab93fff] reserved [ 0.000000] Xen: [mem 0x00000000da6f3000-0x00000000da784fff] reserved [ 0.000000] Xen: [mem 0x00000000da785000-0x00000000da7a8fff] ACPI data [ 0.000000] Xen: [mem 0x00000000da7a9000-0x00000000db4bbfff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000db4bc000-0x00000000dbffefff] reserved [ 0.000000] Xen: [mem 0x00000000dd000000-0x00000000df1fffff] reserved [ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed91fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: LENOVO ThinkServer RS140/ThinkServer RS140, BIOS FBKT75CUS 03/24/2014 [ 0.000000] DMI: Memory slots populated: 2/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000015] Xen PV: Detected 4 vCPUS [ 0.048104] tsc: Fast TSC calibration using PIT [ 0.048105] tsc: Detected 3192.766 MHz processor [ 0.048106] tsc: Detected 3192.604 MHz TSC [ 0.048365] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.048367] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.048372] last_pfn = 0x20063 max_arch_pfn = 0x400000000 [ 0.048374] MTRR map: 4 entries (0 fixed + 4 variable; max 20), built from 10 variable MTRRs [ 0.048376] MTRRs set to read-only [ 0.048378] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.048404] Kernel/User page tables isolation: disabled on XEN PV. [ 0.063955] RAMDISK: [mem 0x04000000-0x053a4fff] [ 0.063959] ACPI: Early table checksum verification disabled [ 0.066651] ACPI: RSDP 0x00000000000F0450 000024 (v02 LENOVO) [ 0.066659] ACPI: XSDT 0x00000000DA78C098 0000B4 (v01 LENOVO TC-FB 000014B0 AMI 00010013) [ 0.066684] ACPI: FACP 0x00000000DA7A3758 00010C (v05 LENOVO TC-FB 000014B0 AMI 00010013) [ 0.066719] ACPI: DSDT 0x00000000DA78C1E0 017573 (v02 LENOVO TC-FB 000014B0 INTL 20120711) [ 0.066729] ACPI: FACS 0x00000000DB4BA080 000040 [ 0.066739] ACPI: APIC 0x00000000DA7A3868 000072 (v03 LENOVO TC-FB 000014B0 AMI 00010013) [ 0.066749] ACPI: FPDT 0x00000000DA7A38E0 000044 (v01 LENOVO TC-FB 000014B0 AMI 00010013) [ 0.066759] ACPI: TCPA 0x00000000DA7A3928 000032 (v02 LENOVO TC-FB 000014B0 MSFT 01000013) [ 0.066769] ACPI: LPIT 0x00000000DA7A3960 00005C (v01 LENOVO TC-FB 000014B0 AMI. 00000005) [ 0.066779] ACPI: SSDT 0x00000000DA7A39C0 000539 (v01 LENOVO TC-FB 000014B0 INTL 20120711) [ 0.066789] ACPI: SSDT 0x00000000DA7A3F00 000AD8 (v01 LENOVO TC-FB 000014B0 INTL 20120711) [ 0.066799] ACPI: MCFG 0x00000000DA7A49D8 00003C (v01 LENOVO TC-FB 000014B0 MSFT 00000097) [ 0.066809] ACPI: HPET 0x00000000DA7A4A18 000038 (v01 LENOVO TC-FB 000014B0 AMI. 00000005) [ 0.066819] ACPI: SSDT 0x00000000DA7A4A50 00036D (v01 LENOVO TC-FB 000014B0 INTL 20120711) [ 0.066829] ACPI: SSDT 0x00000000DA7A4DC0 0034E1 (v01 LENOVO TC-FB 000014B0 INTL 20091112) [ 0.066839] ACPI: ASF! 0x00000000DA7A82A8 0000A5 (v32 LENOVO TC-FB 000014B0 TFSM 000F4240) [ 0.066850] ACPI: RMAD 0x00000000DA7A8350 0000B8 (v01 LENOVO TC-FB 000014B0 INTL 00000001) [ 0.066860] ACPI: EINJ 0x00000000DA7A8408 000130 (v01 LENOVO TC-FB 000014B0 00000000) [ 0.066870] ACPI: ERST 0x00000000DA7A8538 000230 (v01 LENOVO TC-FB 000014B0 00000000) [ 0.066880] ACPI: HEST 0x00000000DA7A8768 0000A8 (v01 LENOVO TC-FB 000014B0 00000000) [ 0.066890] ACPI: BERT 0x00000000DA7A8810 000030 (v01 LENOVO TC-FB 000014B0 00000000) [ 0.066900] ACPI: BGRT 0x00000000DA7A8840 000038 (v00 LENOVO TC-FB 000014B0 AMI 00010013) [ 0.066905] ACPI: Reserving FACP table memory at [mem 0xda7a3758-0xda7a3863] [ 0.066906] ACPI: Reserving DSDT table memory at [mem 0xda78c1e0-0xda7a3752] [ 0.066907] ACPI: Reserving FACS table memory at [mem 0xdb4ba080-0xdb4ba0bf] [ 0.066907] ACPI: Reserving APIC table memory at [mem 0xda7a3868-0xda7a38d9] [ 0.066908] ACPI: Reserving FPDT table memory at [mem 0xda7a38e0-0xda7a3923] [ 0.066909] ACPI: Reserving TCPA table memory at [mem 0xda7a3928-0xda7a3959] [ 0.066909] ACPI: Reserving LPIT table memory at [mem 0xda7a3960-0xda7a39bb] [ 0.066910] ACPI: Reserving SSDT table memory at [mem 0xda7a39c0-0xda7a3ef8] [ 0.066910] ACPI: Reserving SSDT table memory at [mem 0xda7a3f00-0xda7a49d7] [ 0.066911] ACPI: Reserving MCFG table memory at [mem 0xda7a49d8-0xda7a4a13] [ 0.066911] ACPI: Reserving HPET table memory at [mem 0xda7a4a18-0xda7a4a4f] [ 0.066912] ACPI: Reserving SSDT table memory at [mem 0xda7a4a50-0xda7a4dbc] [ 0.066913] ACPI: Reserving SSDT table memory at [mem 0xda7a4dc0-0xda7a82a0] [ 0.066913] ACPI: Reserving ASF! table memory at [mem 0xda7a82a8-0xda7a834c] [ 0.066914] ACPI: Reserving RMAD table memory at [mem 0xda7a8350-0xda7a8407] [ 0.066914] ACPI: Reserving EINJ table memory at [mem 0xda7a8408-0xda7a8537] [ 0.066915] ACPI: Reserving ERST table memory at [mem 0xda7a8538-0xda7a8767] [ 0.066915] ACPI: Reserving HEST table memory at [mem 0xda7a8768-0xda7a880f] [ 0.066916] ACPI: Reserving BERT table memory at [mem 0xda7a8810-0xda7a883f] [ 0.066917] ACPI: Reserving BGRT table memory at [mem 0xda7a8840-0xda7a8877] [ 0.066979] APIC: Switched APIC routing to: Xen PV [ 0.069462] Zone ranges: [ 0.069463] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.069465] DMA32 [mem 0x0000000001000000-0x0000000020062fff] [ 0.069466] Normal empty [ 0.069467] Movable zone start for each node [ 0.069467] Early memory node ranges [ 0.069468] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.069469] node 0: [mem 0x0000000000100000-0x0000000020062fff] [ 0.069470] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020062fff] [ 0.069474] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.069502] On node 0, zone DMA: 99 pages in unavailable ranges [ 0.070594] On node 0, zone DMA32: 32669 pages in unavailable ranges [ 0.070596] p2m virtual area at (____ptrval____), size is 40000000 [ 0.148122] Remapped 99 page(s) [ 0.148472] Reserving Intel graphics memory at [mem 0xdd200000-0xdf1fffff] [ 0.148811] ACPI: PM-Timer IO Port: 0x1808 [ 0.148848] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.148870] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.148878] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.148880] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.148894] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.148898] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.148910] CPU topo: Max. logical packages: 1 [ 0.148911] CPU topo: Max. logical dies: 1 [ 0.148911] CPU topo: Max. dies per package: 1 [ 0.148915] CPU topo: Max. threads per core: 1 [ 0.148916] CPU topo: Num. cores per package: 4 [ 0.148916] CPU topo: Num. threads per package: 4 [ 0.148917] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.148926] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.148928] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.148929] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff] [ 0.148930] [mem 0x20063000-0xca2b5fff] available for PCI devices [ 0.148933] Booting kernel on Xen [ 0.148934] Xen version: 4.19-unstable (preserve-AD) [ 0.148935] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.153340] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.153649] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u524288 [ 0.153653] pcpu-alloc: s194408 r8192 d30872 u524288 alloc=1*2097152 [ 0.153655] pcpu-alloc: [0] 0 1 2 3 [ 0.153691] xen: PV spinlocks enabled [ 0.153694] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.153695] Kernel command line: placeholder root=/dev/mapper/huxelrebe0--vg-root ro console=hvc0 [ 0.153727] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.153741] random: crng init done [ 0.153796] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.153827] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.154274] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.154276] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.154278] software IO TLB: area num 4. [ 0.195311] Memory: 386516K/524284K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 137516K reserved, 0K cma-reserved) [ 0.195413] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.197206] Dynamic Preempt: voluntary [ 0.197305] rcu: Preemptible hierarchical RCU implementation. [ 0.197305] rcu: RCU event tracing is enabled. [ 0.197306] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.197307] Trampoline variant of Tasks RCU enabled. [ 0.197308] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.197308] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.197322] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.204341] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.204440] xen:events: Using FIFO-based ABI [ 0.204457] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.204462] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.204467] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.204471] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.204476] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.204480] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.204485] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.204490] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.204494] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.204499] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.204504] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.204509] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.204513] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.204519] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.204523] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.204530] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.206115] Console: colour VGA+ 80x25 [ 0.206118] printk: legacy console [tty0] enabled [ 0.213948] printk: legacy console [hvc0] enabled [ 0.214923] ACPI: Core revision 20240322 [ 0.224459] ACPI BIOS Warning (bug): Incorrect checksum in table [BGRT] - 0x92, should be 0x4D (20240322/utcksum-58) [ 0.224609] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.224695] Xen: using vcpuop timer interface [ 0.224702] installing Xen timer for CPU 0 [ 0.224793] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e04ff556d3, max_idle_ns: 440795348168 ns [ 0.224880] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.20 BogoMIPS (lpj=3192604) [ 0.225077] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.225203] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.225269] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.225348] Spectre V2 : Mitigation: Retpolines [ 0.225403] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.225481] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.225540] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.225600] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.225679] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.225887] MDS: Mitigation: Clear CPU buffers [ 0.225943] MMIO Stale Data: Unknown: No mitigations [ 0.225999] SRBDS: Unknown: Dependent on hypervisor status [ 0.226069] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.226146] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.226265] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.226324] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.226383] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.241346] Freeing SMP alternatives memory: 40K [ 0.241465] pid_max: default: 32768 minimum: 301 [ 0.241535] LSM: initializing lsm=capability,selinux [ 0.241594] SELinux: Initializing. [ 0.241666] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.241743] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.242947] cpu 0 spinlock event irq 25 [ 0.243007] VPMU disabled by hypervisor. [ 0.243352] Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only. [ 0.243435] signal: max sigframe size: 1776 [ 0.243532] rcu: Hierarchical SRCU implementation. [ 0.243588] rcu: Max phase no-delay instances is 400. [ 0.243945] smp: Bringing up secondary CPUs ... [ 0.244145] installing Xen timer for CPU 1 [ 0.244498] installing Xen timer for CPU 2 [ 0.244775] installing Xen timer for CPU 3 [ 0.021346] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0002 [ 0.244921] cpu 1 spinlock event irq 45 [ 0.021346] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0004 [ 0.245058] cpu 2 spinlock event irq 46 [ 0.021346] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0006 [ 0.245906] cpu 3 spinlock event irq 47 [ 0.246070] smp: Brought up 1 node, 4 CPUs [ 0.246243] devtmpfs: initialized [ 0.246243] x86/mm: Memory block size: 128MB [ 0.246915] ACPI: PM: Registering ACPI NVS region [mem 0xca2b6000-0xca2bcfff] (28672 bytes) [ 0.247085] ACPI: PM: Registering ACPI NVS region [mem 0xda7a9000-0xdb4bbfff] (13709312 bytes) [ 0.247277] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.247360] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.247530] PM: RTC time: 09:37:32, date: 2024-06-27 [ 0.247686] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.247771] xen:grant_table: Grant tables using version 1 layout [ 0.247895] Grant table initialized [ 0.248044] audit: initializing netlink subsys (disabled) [ 0.248157] audit: type=2000 audit(1719481053.422:1): state=initialized audit_enabled=0 res=1 [ 0.248157] thermal_sys: Registered thermal governor 'step_wise' [ 0.248157] thermal_sys: Registered thermal governor 'user_space' [ 0.248157] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.248260] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f] [ 0.248342] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved as E820 entry [ 0.270058] PCI: Using configuration type 1 for base access [ 0.270165] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.270165] ACPI: Added _OSI(Module Device) [ 0.270165] ACPI: Added _OSI(Processor Device) [ 0.270165] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.270165] ACPI: Added _OSI(Processor Aggregator Device) [ 0.284989] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.285660] xen: registering gsi 9 triggering 0 polarity 0 [ 0.286245] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.287254] ACPI: Dynamic OEM Table Load: [ 0.287316] ACPI: SSDT 0xFFFF8880039A0C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.288538] ACPI: Dynamic OEM Table Load: [ 0.288597] ACPI: SSDT 0xFFFF888003ADD800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.289243] ACPI: Dynamic OEM Table Load: [ 0.289301] ACPI: SSDT 0xFFFF888003982600 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.290479] ACPI: _OSC evaluated successfully for all CPUs [ 0.290960] ACPI: Interpreter enabled [ 0.291030] ACPI: PM: (supports S0 S5) [ 0.291084] ACPI: Using IOAPIC for interrupt routing [ 0.291160] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.291291] PCI: Using E820 reservations for host bridge windows [ 0.291859] ACPI: Enabled 11 GPEs in block 00 to 3F [ 0.302589] ACPI: \_TZ_.FN00: New power resource [ 0.302689] ACPI: \_TZ_.FN01: New power resource [ 0.302786] ACPI: \_TZ_.FN02: New power resource [ 0.302893] ACPI: \_TZ_.FN03: New power resource [ 0.303001] ACPI: \_TZ_.FN04: New power resource [ 0.303856] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.303885] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.304565] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability LTR] [ 0.304626] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.305107] PCI host bridge to bus 0000:00 [ 0.305163] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.305224] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.305284] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.305360] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000e7fff window] [ 0.305436] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window] [ 0.305522] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.305615] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000 conventional PCI endpoint [ 0.305956] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 PCIe Root Port [ 0.306108] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.306361] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.306746] pci 0000:00:01.1: [8086:0c05] type 01 class 0x060400 PCIe Root Port [ 0.306910] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.306975] pci 0000:00:01.1: bridge window [io 0xe000-0xefff] [ 0.307040] pci 0000:00:01.1: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.307256] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.307687] pci 0000:00:01.2: [8086:0c09] type 01 class 0x060400 PCIe Root Port [ 0.307839] pci 0000:00:01.2: PCI bridge to [bus 03] [ 0.307891] pci 0000:00:01.2: bridge window [io 0xd000-0xdfff] [ 0.307955] pci 0000:00:01.2: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.308171] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold [ 0.308560] pci 0000:00:02.0: [8086:041a] type 00 class 0x030000 conventional PCI endpoint [ 0.308685] pci 0000:00:02.0: BAR 0 [mem 0xf7800000-0xf7bfffff 64bit] [ 0.308773] pci 0000:00:02.0: BAR 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.308852] pci 0000:00:02.0: BAR 4 [io 0xf000-0xf03f] [ 0.308944] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.309223] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint [ 0.309349] pci 0000:00:03.0: BAR 0 [mem 0xf7e30000-0xf7e33fff 64bit] [ 0.309795] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 conventional PCI endpoint [ 0.309950] pci 0000:00:14.0: BAR 0 [mem 0xf7e20000-0xf7e2ffff 64bit] [ 0.310255] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.310540] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 conventional PCI endpoint [ 0.310684] pci 0000:00:16.0: BAR 0 [mem 0xf7e3c000-0xf7e3c00f 64bit] [ 0.310999] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.311188] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002 conventional PCI endpoint [ 0.311316] pci 0000:00:16.3: BAR 0 [io 0xf0e0-0xf0e7] [ 0.311400] pci 0000:00:16.3: BAR 1 [mem 0xf7e3a000-0xf7e3afff] [ 0.311857] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000 conventional PCI endpoint [ 0.311932] pci 0000:00:19.0: BAR 0 [mem 0xf7e00000-0xf7e1ffff] [ 0.312018] pci 0000:00:19.0: BAR 1 [mem 0xf7e39000-0xf7e39fff] [ 0.312103] pci 0000:00:19.0: BAR 2 [io 0xf080-0xf09f] [ 0.312384] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.312615] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 conventional PCI endpoint [ 0.312746] pci 0000:00:1a.0: BAR 0 [mem 0xf7e38000-0xf7e383ff] [ 0.313106] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.313321] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 PCIe Root Port [ 0.313523] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.313844] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.313944] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.314004] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.314409] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 PCIe Root Port [ 0.314611] pci 0000:00:1c.3: PCI bridge to [bus 05-06] [ 0.314939] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.315057] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.315117] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.315494] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 conventional PCI endpoint [ 0.315623] pci 0000:00:1d.0: BAR 0 [mem 0xf7e37000-0xf7e373ff] [ 0.316044] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.316257] pci 0000:00:1f.0: [8086:8c56] type 00 class 0x060100 conventional PCI endpoint [ 0.316792] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 conventional PCI endpoint [ 0.316931] pci 0000:00:1f.2: BAR 0 [io 0xf0d0-0xf0d7] [ 0.317560] pci 0000:00:1f.2: BAR 1 [io 0xf0c0-0xf0c3] [ 0.317643] pci 0000:00:1f.2: BAR 2 [io 0xf0b0-0xf0b7] [ 0.317725] pci 0000:00:1f.2: BAR 3 [io 0xf0a0-0xf0a3] [ 0.317808] pci 0000:00:1f.2: BAR 4 [io 0xf060-0xf07f] [ 0.317908] pci 0000:00:1f.2: BAR 5 [mem 0xf7e36000-0xf7e367ff] [ 0.318113] pci 0000:00:1f.2: PME# supported from D3hot [ 0.318297] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 conventional PCI endpoint [ 0.318441] pci 0000:00:1f.3: BAR 0 [mem 0xf7e35000-0xf7e350ff 64bit] [ 0.318631] pci 0000:00:1f.3: BAR 4 [io 0x0580-0x059f] [ 0.318933] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.319143] pci 0000:02:00.0: working around ROM BAR overlap defect [ 0.319203] pci 0000:02:00.0: [8086:1533] type 00 class 0x020000 PCIe Endpoint [ 0.319339] pci 0000:02:00.0: BAR 0 [mem 0xf7d00000-0xf7d7ffff] [ 0.319460] pci 0000:02:00.0: BAR 2 [io 0xe000-0xe01f] [ 0.319586] pci 0000:02:00.0: BAR 3 [mem 0xf7d80000-0xf7d83fff] [ 0.319989] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.320330] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.320557] pci 0000:03:00.0: working around ROM BAR overlap defect [ 0.320617] pci 0000:03:00.0: [8086:1533] type 00 class 0x020000 PCIe Endpoint [ 0.320740] pci 0000:03:00.0: BAR 0 [mem 0xf7c00000-0xf7c7ffff] [ 0.320849] pci 0000:03:00.0: BAR 2 [io 0xd000-0xd01f] [ 0.320908] pci 0000:03:00.0: BAR 3 [mem 0xf7c80000-0xf7c83fff] [ 0.321244] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.321519] pci 0000:00:01.2: PCI bridge to [bus 03] [ 0.321715] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.321987] pci 0000:05:00.0: [1283:8893] type 01 class 0x060401 conventional PCI bridge [ 0.322254] pci 0000:05:00.0: PCI bridge to [bus 06] (subtractive decode) [ 0.322684] pci 0000:05:00.0: supports D1 D2 [ 0.322739] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.322989] pci 0000:00:1c.3: PCI bridge to [bus 05-06] [ 0.323168] pci_bus 0000:06: extended config space not accessible [ 0.323407] pci 0000:05:00.0: PCI bridge to [bus 06] (subtractive decode) [ 0.323669] pci_bus 0000:00: on NUMA node 0 [ 0.323815] xen: registering gsi 13 triggering 1 polarity 0 [ 0.324570] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.324681] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.324788] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.324913] ACPI: PCI: Interrupt link LNKD configured for IRQ 3 [ 0.325021] ACPI: PCI: Interrupt link LNKE configured for IRQ 11 [ 0.325128] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.325187] ACPI: PCI: Interrupt link LNKF disabled [ 0.325299] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.325363] ACPI: PCI: Interrupt link LNKG disabled [ 0.325466] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.325853] xen:balloon: Initialising balloon driver [ 0.325939] iommu: Default domain type: Translated [ 0.325996] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.326092] SCSI subsystem initialized [ 0.326164] libata version 3.00 loaded. [ 0.326164] ACPI: bus type USB registered [ 0.326164] usbcore: registered new interface driver usbfs [ 0.326164] usbcore: registered new interface driver hub [ 0.326164] usbcore: registered new device driver usb [ 0.326252] pps_core: LinuxPPS API ver. 1 registered [ 0.326308] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.326389] PTP clock support registered [ 0.326907] Advanced Linux Sound Architecture Driver Initialized. [ 0.327106] NetLabel: Initializing [ 0.327161] NetLabel: domain hash size = 128 [ 0.327217] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.327286] NetLabel: unlabeled traffic allowed by default [ 0.327369] PCI: Using ACPI for IRQ routing [ 0.334645] PCI: pci_cache_line_size set to 64 bytes [ 0.334833] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff] [ 0.334834] e820: reserve RAM buffer [mem 0x20063000-0x23ffffff] [ 0.334904] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.334991] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.335050] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.335130] vgaarb: loaded [ 0.335748] clocksource: Switched to clocksource tsc-early [ 0.335839] VFS: Disk quotas dquot_6.6.0 [ 0.335839] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.335839] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.335839] pnp: PnP ACPI init [ 0.335839] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.335839] system 00:00: [io 0xffff] has been reserved [ 0.335839] system 00:00: [io 0xffff] has been reserved [ 0.335839] system 00:00: [io 0xffff] has been reserved [ 0.335839] system 00:00: [io 0x1c00-0x1cfe] has been reserved [ 0.335839] system 00:00: [io 0x1d00-0x1dfe] has been reserved [ 0.335892] system 00:00: [io 0x1e00-0x1efe] has been reserved [ 0.335953] system 00:00: [io 0x1f00-0x1ffe] has been reserved [ 0.336014] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.336022] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.336022] xen: registering gsi 8 triggering 1 polarity 0 [ 0.336022] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.336022] system 00:03: [io 0x0a00-0x0a2f] has been reserved [ 0.336022] system 00:03: [io 0x0a30-0x0a3f] has been reserved [ 0.336022] system 00:03: [io 0x0a40-0x0a4f] has been reserved [ 0.336022] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.336022] xen: registering gsi 4 triggering 1 polarity 0 [ 0.336022] Already setup the GSI :4 [ 0.336945] pnp 00:05: [dma 0 disabled] [ 0.337672] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.337736] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.337798] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.337859] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.337947] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.338008] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.338069] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.338135] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.338254] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.338315] system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.338376] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 0.338437] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.338752] pnp: PnP ACPI: found 8 devices [ 0.358395] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.358477] NET: Registered PF_INET protocol family [ 0.358559] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.358766] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.358848] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.358991] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.359077] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.359170] TCP: Hash tables configured (established 4096 bind 4096) [ 0.359241] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.359303] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.359381] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.360064] RPC: Registered named UNIX socket transport module. [ 0.360135] RPC: Registered udp transport module. [ 0.360191] RPC: Registered tcp transport module. [ 0.360247] RPC: Registered tcp-with-tls transport module. [ 0.360304] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.360693] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.360781] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.360843] pci 0000:00:01.1: bridge window [io 0xe000-0xefff] [ 0.360921] pci 0000:00:01.1: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.361000] pci 0000:00:01.2: PCI bridge to [bus 03] [ 0.361062] pci 0000:00:01.2: bridge window [io 0xd000-0xdfff] [ 0.361131] pci 0000:00:01.2: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.361211] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.361305] pci 0000:05:00.0: PCI bridge to [bus 06] [ 0.361407] pci 0000:00:1c.3: PCI bridge to [bus 05-06] [ 0.361502] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.361563] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.361625] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.361687] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000e7fff window] [ 0.361808] pci_bus 0000:00: resource 8 [mem 0xdf200000-0xfeafffff window] [ 0.361871] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.361953] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 0.362013] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.362069] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.362238] xen: registering gsi 16 triggering 0 polarity 1 [ 0.362254] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.362459] xen: registering gsi 17 triggering 0 polarity 1 [ 0.362472] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.379975] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x7c0 took 17139 usecs [ 0.380109] xen: registering gsi 23 triggering 0 polarity 1 [ 0.380123] xen: --> pirq=23 -> irq=23 (gsi=23) [ 0.397984] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x7c0 took 17490 usecs [ 0.398109] PCI: CLS 64 bytes, default 64 [ 0.398189] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.398233] Unpacking initramfs... [ 0.398248] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.398422] kvm_intel: VMX not supported by CPU 2 [ 0.398479] kvm_amd: CPU 2 isn't AMD or Hygon [ 0.398536] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e04ff556d3, max_idle_ns: 440795348168 ns [ 0.398671] clocksource: Switched to clocksource tsc [ 0.402471] Initialise system trusted keyrings [ 0.402613] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.402802] NFS: Registering the id_resolver key type [ 0.402865] Key type id_resolver registered [ 0.402922] Key type id_legacy registered [ 0.403018] 9p: Installing v9fs 9p2000 file system support [ 0.414108] Key type asymmetric registered [ 0.414176] Asymmetric key parser 'x509' registered [ 0.414250] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.414334] io scheduler mq-deadline registered [ 0.414417] io scheduler kyber registered [ 0.414874] xen: registering gsi 16 triggering 0 polarity 1 [ 0.414880] Already setup the GSI :16 [ 0.415069] pcieport 0000:00:01.0: PME: Signaling with IRQ 50 [ 0.415282] xen: registering gsi 16 triggering 0 polarity 1 [ 0.415287] Already setup the GSI :16 [ 0.415489] pcieport 0000:00:01.1: PME: Signaling with IRQ 51 [ 0.415693] xen: registering gsi 16 triggering 0 polarity 1 [ 0.415697] Already setup the GSI :16 [ 0.415882] pcieport 0000:00:01.2: PME: Signaling with IRQ 52 [ 0.416119] xen: registering gsi 16 triggering 0 polarity 1 [ 0.416122] Already setup the GSI :16 [ 0.416311] pcieport 0000:00:1c.0: PME: Signaling with IRQ 53 [ 0.416598] xen: registering gsi 19 triggering 0 polarity 1 [ 0.416612] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.416745] pcieport 0000:00:1c.3: PME: Signaling with IRQ 54 [ 0.417046] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.417767] ACPI: button: Power Button [PWRB] [ 0.417850] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.417995] ACPI: button: Power Button [PWRF] [ 0.418312] Monitor-Mwait will be used to enter C-1 state [ 0.418342] Monitor-Mwait will be used to enter C-2 state [ 0.418359] ACPI: \_PR_.CPU0: Found 2 idle states [ 0.418587] ACPI: \_PR_.CPU1: Found 2 idle states [ 0.418826] ACPI: \_PR_.CPU2: Found 2 idle states [ 0.419026] ACPI: \_PR_.CPU3: Found 2 idle states [ 0.419430] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.419494] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.419756] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.419818] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.420174] xen:xen_evtchn: Event-channel device installed [ 0.420298] xen_pciback: backend is vpci [ 0.420739] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.421196] xen: registering gsi 19 triggering 0 polarity 1 [ 0.421201] Already setup the GSI :19 [ 0.421577] 0000:00:16.3: ttyS0 at I/O 0xf0e0 (irq = 19, base_baud = 115200) is a 16550A [ 0.421859] hpet_acpi_add: no address or irqs in _CRS [ 0.421966] Non-volatile memory driver v1.3 [ 0.423206] loop: module loaded [ 0.426573] ahci 0000:00:1f.2: version 3.0 [ 0.426674] xen: registering gsi 19 triggering 0 polarity 1 [ 0.426681] Already setup the GSI :19 [ 0.426682] xen: registering gsi 16 triggering 0 polarity 1 [ 0.426754] Already setup the GSI :16 [ 0.426861] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 6 Gbps, SATA mode [ 0.427022] ahci 0000:00:1f.2: 5/5 ports implemented (port mask 0x1f) [ 0.427088] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 0.441089] scsi host0: ahci [ 0.441383] scsi host1: ahci [ 0.441622] scsi host2: ahci [ 0.441847] scsi host3: ahci [ 0.442028] scsi host4: ahci [ 0.442108] ata1: SATA max UDMA/133 abar m2048@0xf7e36000 port 0xf7e36100 irq 56 lpm-pol 0 [ 0.442245] ata2: SATA max UDMA/133 abar m2048@0xf7e36000 port 0xf7e36180 irq 56 lpm-pol 0 [ 0.442327] ata3: SATA max UDMA/133 abar m2048@0xf7e36000 port 0xf7e36200 irq 56 lpm-pol 0 [ 0.442421] ata4: SATA max UDMA/133 abar m2048@0xf7e36000 port 0xf7e36280 irq 56 lpm-pol 0 [ 0.442503] ata5: SATA max UDMA/133 abar m2048@0xf7e36000 port 0xf7e36300 irq 56 lpm-pol 0 [ 0.442762] tun: Universal TUN/TAP device driver, 1.6 [ 0.442900] e100: Intel(R) PRO/100 Network Driver [ 0.442959] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.443024] sky2: driver version 1.30 [ 0.443100] xen_netfront: Initialising Xen virtual ethernet driver [ 0.443403] xen: registering gsi 17 triggering 0 polarity 1 [ 0.443410] Already setup the GSI :17 [ 0.443460] xen: registering gsi 16 triggering 0 polarity 1 [ 0.443467] xen: registering gsi 23 triggering 0 polarity 1 [ 0.443472] Already setup the GSI :23 [ 0.443472] Already setup the GSI :16 [ 0.443544] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.443595] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.443857] ehci-pci 0000:00:1d.0: debug port 2 [ 0.447893] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e37000 [ 0.454393] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.454603] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.454774] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.454851] usb usb1: Product: EHCI Host Controller [ 0.454909] usb usb1: Manufacturer: Linux 6.10.0-rc5+ ehci_hcd [ 0.454969] usb usb1: SerialNumber: 0000:00:1d.0 [ 0.455195] hub 1-0:1.0: USB hub found [ 0.455260] hub 1-0:1.0: 3 ports detected [ 0.455541] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.455709] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 2 [ 0.455814] ehci-pci 0000:00:1a.0: debug port 2 [ 0.459853] ehci-pci 0000:00:1a.0: irq 17, io mem 0xf7e38000 [ 0.466392] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.466738] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.466847] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.466925] usb usb2: Product: EHCI Host Controller [ 0.466983] usb usb2: Manufacturer: Linux 6.10.0-rc5+ ehci_hcd [ 0.467042] usb usb2: SerialNumber: 0000:00:1a.0 [ 0.467322] hub 2-0:1.0: USB hub found [ 0.467408] hub 2-0:1.0: 3 ports detected [ 0.467673] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.467804] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.468966] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.469301] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.469411] Freeing initrd memory: 20116K [ 0.469457] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.469567] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.469706] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.469788] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.469864] usb usb3: Product: xHCI Host Controller [ 0.469938] usb usb3: Manufacturer: Linux 6.10.0-rc5+ xhci-hcd [ 0.470028] usb usb3: SerialNumber: 0000:00:14.0 [ 0.470254] hub 3-0:1.0: USB hub found [ 0.470330] hub 3-0:1.0: 15 ports detected [ 0.474565] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.10 [ 0.474645] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.474721] usb usb4: Product: xHCI Host Controller [ 0.474777] usb usb4: Manufacturer: Linux 6.10.0-rc5+ xhci-hcd [ 0.474835] usb usb4: SerialNumber: 0000:00:14.0 [ 0.475018] hub 4-0:1.0: USB hub found [ 0.475095] hub 4-0:1.0: 6 ports detected [ 0.476189] usbcore: registered new interface driver usblp [ 0.476257] usbcore: registered new interface driver usb-storage [ 0.476338] i8042: PNP: No PS/2 controller found. [ 0.476648] rtc_cmos 00:01: RTC can wake from S4 [ 0.477142] rtc_cmos 00:01: registered as rtc0 [ 0.477231] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram [ 0.477330] device-mapper: uevent: version 1.0.3 [ 0.477426] xen: registering gsi 18 triggering 0 polarity 1 [ 0.477469] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.477476] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.477546] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.477582] intel_pstate: CPU model not supported [ 0.477724] hid: raw HID events driver (C) Jiri Kosina [ 0.477873] usbcore: registered new interface driver usbhid [ 0.477940] usbhid: USB HID core driver [ 0.478398] xen: registering gsi 16 triggering 0 polarity 1 [ 0.478403] Already setup the GSI :16 [ 0.478471] snd_hda_intel 0000:00:03.0: Haswell/Broadwell HDMI/DP must build in CONFIG_SND_HDA_I915 [ 0.478804] Initializing XFRM netlink socket [ 0.478896] NET: Registered PF_INET6 protocol family [ 0.479003] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.479212] Segment Routing with IPv6 [ 0.479294] In-situ OAM (IOAM) with IPv6 [ 0.479383] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.479537] NET: Registered PF_PACKET protocol family [ 0.479544] i2c i2c-0: Successfully instantiated SPD at 0x53 [ 0.479615] 9pnet: Installing 9P2000 support [ 0.479786] Key type dns_resolver registered [ 0.480033] IPI shorthand broadcast: enabled [ 0.481026] snd_hda_intel 0000:00:03.0: Cannot probe codecs, giving up [ 0.482004] sched_clock: Marking stable (461003159, 20346889)->(483905097, -2555049) [ 0.482305] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.482486] registered taskstats version 1 [ 0.482543] Loading compiled-in X.509 certificates [ 0.483522] PM: Magic number: 12:563:627 [ 0.483648] printk: legacy console [netcon0] enabled [ 0.483708] netconsole: network logging started [ 0.483965] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.491634] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.491842] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.491931] ALSA device list: [ 0.491985] No soundcards found. [ 0.492433] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.698466] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.707389] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.750188] ata2: SATA link down (SStatus 0 SControl 300) [ 0.750294] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.750483] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.750569] ata4: SATA link down (SStatus 0 SControl 300) [ 0.750664] ata3: SATA link down (SStatus 0 SControl 300) [ 0.751353] ata1.00: ATA-9: ST1000NM0033-9ZM173, LV5B, max UDMA/133 [ 0.752014] ata1.00: NCQ Send/Recv Log not supported [ 0.752081] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.753480] ata1.00: NCQ Send/Recv Log not supported [ 0.753549] ata1.00: configured for UDMA/133 [ 0.753732] scsi 0:0:0:0: Direct-Access ATA ST1000NM0033-9ZM LV5B PQ: 0 ANSI: 5 [ 0.754373] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.754396] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.754556] sd 0:0:0:0: [sda] Write Protect is off [ 0.754620] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.754638] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.754758] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 0.763256] ata5.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out [ 0.763822] ata5.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out [ 0.769045] ata5.00: ATAPI: PLDS DVD-RW DU8A5SH, BL61, max UDMA/100 [ 0.773520] sda: sda1 sda2 < sda5 > [ 0.773910] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.781138] ata5.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out [ 0.781219] ata5.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out [ 0.782091] ata5.00: configured for UDMA/100 [ 0.790401] scsi 4:0:0:0: CD-ROM PLDS DVD-RW DU8A5SH BL61 PQ: 0 ANSI: 5 [ 0.821705] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.821790] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.826806] usb 1-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04 [ 0.826899] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.827226] hub 1-1:1.0: USB hub found [ 0.827432] hub 1-1:1.0: 8 ports detected [ 0.835773] usb 2-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04 [ 0.835855] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.836169] hub 2-1:1.0: USB hub found [ 0.836391] hub 2-1:1.0: 6 ports detected [ 0.838694] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 0.838782] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 0.840057] Freeing unused kernel image (initmem) memory: 2680K [ 0.840132] Write protecting the kernel read-only data: 24576k [ 0.853014] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 0.918738] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.918840] Run /init as init process [ 0.918911] with arguments: [ 0.918912] /init [ 0.918913] placeholder [ 0.918913] with environment: [ 0.918914] HOME=/ [ 0.918915] TERM=linux [ 1.119889] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.119963] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.121579] xen: registering gsi 17 triggering 0 polarity 1 [ 1.121587] Already setup the GSI :17 [ 1.123980] e1000e: Intel(R) PRO/1000 Network Driver [ 1.124044] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.124176] xen: registering gsi 20 triggering 0 polarity 1 [ 1.124199] xen: --> pirq=20 -> irq=20 (gsi=20) [ 1.124480] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.152700] pps pps0: new PPS source ptp0 [ 1.152864] igb 0000:02:00.0: added PHC on eth0 [ 1.152957] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection [ 1.153026] igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 44:39:c4:6d:20:4d [ 1.153180] igb 0000:02:00.0: eth0: PBA No: 000300-000 [ 1.153246] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 1.153447] xen: registering gsi 18 triggering 0 polarity 1 [ 1.153453] Already setup the GSI :18 [ 1.182176] pps pps1: new PPS source ptp1 [ 1.182323] igb 0000:03:00.0: added PHC on eth1 [ 1.182452] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection [ 1.182532] igb 0000:03:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 44:39:c4:6d:20:4e [ 1.182625] igb 0000:03:00.0: eth1: PBA No: 000300-000 [ 1.182771] igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 1.184156] igb 0000:02:00.0 enx4439c46d204d: renamed from eth0 [ 1.185207] igb 0000:03:00.0 enx4439c46d204e: renamed from eth1 [ 1.197899] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 1.259863] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 44:39:c4:39:a1:26 [ 1.259945] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.260047] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 1.261325] e1000e 0000:00:19.0 enx4439c439a126: renamed from eth0 [ 1.879026] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 1.889786] EXT4-fs (dm-0): mounted filesystem c9987a2a-0033-4a43-b490-ba5828f1db51 ro with ordered data mode. Quota mode: none. [ 4.504267] EXT4-fs (dm-0): re-mounted c9987a2a-0033-4a43-b490-ba5828f1db51 r/w. Quota mode: none. [ 5.622851] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 5.634621] EXT4-fs (sda1): mounted filesystem 02731b73-61af-45ab-bc70-e3fb7f5d25b9 r/w with ordered data mode. Quota mode: none. [ 5.693639] Adding 1949692k swap on /dev/mapper/huxelrebe0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 7.227904] xenbr0: port 1(enx4439c46d204e) entered blocking state [ 7.228001] xenbr0: port 1(enx4439c46d204e) entered disabled state [ 7.228126] igb 0000:03:00.0 enx4439c46d204e: entered allmulticast mode [ 7.228219] igb 0000:03:00.0 enx4439c46d204e: entered promiscuous mode [ 10.109827] igb 0000:03:00.0 enx4439c46d204e: igb: enx4439c46d204e NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 10.216587] xenbr0: port 1(enx4439c46d204e) entered blocking state [ 10.216693] xenbr0: port 1(enx4439c46d204e) entered forwarding state