[ 0.000000] Linux version 6.1.96 (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Thu Jun 27 13:27:14 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000459] tsc: Detected 2199.996 MHz processor [ 0.000902] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000905] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000912] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000914] Disabled [ 0.000915] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000919] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000958] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027742] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.027750] ACPI: Early table checksum verification disabled [ 0.028349] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028361] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028398] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028446] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028462] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028478] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028494] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028510] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028526] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028542] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028558] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028574] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028590] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028606] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028622] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028638] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028654] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028674] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028690] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028706] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028722] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028738] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028746] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028748] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028749] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028750] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028751] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028752] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028753] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028754] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028755] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028756] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028757] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028758] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028759] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028760] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028761] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028762] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028763] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028764] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028765] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028768] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028813] Setting APIC routing to Xen PV. [ 0.032762] Zone ranges: [ 0.032763] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032766] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032768] Normal empty [ 0.032769] Movable zone start for each node [ 0.032770] Early memory node ranges [ 0.032770] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032772] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032774] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032779] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032817] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034366] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034371] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221876] Remapped 102 page(s) [ 0.223247] ACPI: PM-Timer IO Port: 0x408 [ 0.223301] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223304] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223305] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223307] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223308] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223310] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223311] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223313] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223341] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223355] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223358] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223384] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223388] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223458] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223473] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223475] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223477] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223478] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223483] Booting kernel on Xen [ 0.223484] Xen version: 4.19-unstable (preserve-AD) [ 0.223487] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229726] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.230008] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.230015] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.230018] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230096] xen: PV spinlocks enabled [ 0.230099] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230104] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230106] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230144] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230153] random: crng init done [ 0.230202] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230227] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231546] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231549] software IO TLB: area num 8. [ 0.291007] Memory: 390032K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1576K init, 1296K bss, 134000K reserved, 0K cma-reserved) [ 0.291178] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.293663] Dynamic Preempt: voluntary [ 0.293764] rcu: Preemptible hierarchical RCU implementation. [ 0.293765] rcu: RCU event tracing is enabled. [ 0.293766] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.293767] Trampoline variant of Tasks RCU enabled. [ 0.293768] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.293769] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.304272] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.304397] xen:events: Using FIFO-based ABI [ 0.304421] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.304430] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.304437] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.304445] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.304452] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.304460] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.304467] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.304475] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.304482] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.304490] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.304497] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.304505] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.304513] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.304522] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.304529] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.304540] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.309894] Console: colour VGA+ 80x25 [ 0.324667] printk: console [tty0] enabled [ 0.325999] printk: console [hvc0] enabled [ 0.326137] ACPI: Core revision 20220331 [ 0.341615] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.341781] Xen: using vcpuop timer interface [ 0.341788] installing Xen timer for CPU 0 [ 0.341936] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.342096] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199996) [ 0.342426] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.342543] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.342670] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.342819] Spectre V2 : Mitigation: Retpolines [ 0.343102] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.343274] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.343393] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.343515] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.343663] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.343782] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.343934] MDS: Mitigation: Clear CPU buffers [ 0.344047] TAA: Mitigation: Clear CPU buffers [ 0.344099] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.344265] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.344411] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.344562] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.344681] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.344801] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.362506] Freeing SMP alternatives memory: 40K [ 0.362633] pid_max: default: 32768 minimum: 301 [ 0.363117] LSM: Security Framework initializing [ 0.363240] SELinux: Initializing. [ 0.363380] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363530] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364187] cpu 0 spinlock event irq 25 [ 0.364308] VPMU disabled by hypervisor. [ 0.364742] cblist_init_generic: Setting adjustable number of callback queues. [ 0.364888] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.365046] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.365100] signal: max sigframe size: 1776 [ 0.365264] rcu: Hierarchical SRCU implementation. [ 0.365385] rcu: Max phase no-delay instances is 400. [ 0.365876] smp: Bringing up secondary CPUs ... [ 0.366212] installing Xen timer for CPU 1 [ 0.366684] cpu 1 spinlock event irq 35 [ 0.367237] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.367406] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.367595] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.368319] installing Xen timer for CPU 2 [ 0.368788] cpu 2 spinlock event irq 41 [ 0.369219] installing Xen timer for CPU 3 [ 0.369653] cpu 3 spinlock event irq 47 [ 0.369653] installing Xen timer for CPU 4 [ 0.370435] cpu 4 spinlock event irq 53 [ 0.370435] installing Xen timer for CPU 5 [ 0.371269] cpu 5 spinlock event irq 59 [ 0.371302] installing Xen timer for CPU 6 [ 0.372156] cpu 6 spinlock event irq 65 [ 0.372350] installing Xen timer for CPU 7 [ 0.372780] cpu 7 spinlock event irq 71 [ 0.373336] smp: Brought up 1 node, 8 CPUs [ 0.373454] smpboot: Max logical packages: 1 [ 0.373672] devtmpfs: initialized [ 0.373672] x86/mm: Memory block size: 128MB [ 0.374331] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.374392] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.374550] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.374801] PM: RTC time: 13:41:23, date: 2024-06-27 [ 0.375353] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.375500] xen:grant_table: Grant tables using version 1 layout [ 0.375637] Grant table initialized [ 0.375951] audit: initializing netlink subsys (disabled) [ 0.376119] audit: type=2000 audit(1719495683.506:1): state=initialized audit_enabled=0 res=1 [ 0.376168] thermal_sys: Registered thermal governor 'step_wise' [ 0.376168] thermal_sys: Registered thermal governor 'user_space' [ 0.376320] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.376752] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.377104] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.506050] PCI: Using configuration type 1 for base access [ 0.508619] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.509169] ACPI: Added _OSI(Module Device) [ 0.509268] ACPI: Added _OSI(Processor Device) [ 0.509382] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.509496] ACPI: Added _OSI(Processor Aggregator Device) [ 0.539101] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.541085] xen: registering gsi 9 triggering 0 polarity 0 [ 0.544921] ACPI: Dynamic OEM Table Load: [ 0.552335] ACPI: Interpreter enabled [ 0.552468] ACPI: PM: (supports S0 S4 S5) [ 0.552580] ACPI: Using IOAPIC for interrupt routing [ 0.552725] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.552876] PCI: Using E820 reservations for host bridge windows [ 0.553458] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.588780] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.588909] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.589152] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.589419] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.589571] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.589963] PCI host bridge to bus 0000:ff [ 0.590076] pci_bus 0000:ff: root bus resource [bus ff] [ 0.590178] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.590627] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.591080] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.591404] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.591844] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.592296] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.592905] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.593331] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.593985] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.594416] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.594872] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.595298] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.595725] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.596151] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.596620] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.597040] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.597628] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.598057] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.598235] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.598700] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.599209] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.599677] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.600147] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.600853] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.601520] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.602006] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.602404] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.602836] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.603334] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.603805] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.604279] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.604765] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.605392] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.605844] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.606270] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.606702] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.607199] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.607665] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.608331] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.608882] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.609311] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.609765] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.610195] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.610443] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.610879] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.611341] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.611766] pci_bus 0000:ff: on NUMA node 0 [ 0.616539] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.616668] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.617130] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.617475] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.617595] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.618088] PCI host bridge to bus 0000:00 [ 0.618206] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.618328] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.618449] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.618594] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.618739] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.618918] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.619586] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.619586] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.619586] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.620094] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.620094] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.621167] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.621523] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.622038] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.622387] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.623122] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.623494] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.624245] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.624619] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.625227] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.625850] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.626540] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.626758] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.627223] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.627567] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.628018] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.628442] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.628748] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.628966] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.629455] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.629814] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.630012] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.630540] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.631059] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.632725] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.632963] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.633086] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.640283] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.640846] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.641044] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.641107] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.641432] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.642001] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.642177] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.642299] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.642635] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.643194] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.643391] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.643528] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.643865] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.644100] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.644641] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.644963] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.645749] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.645943] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.646099] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.646257] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.646415] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.646573] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.646757] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.647070] pci 0000:00:1f.2: PME# supported from D3hot [ 0.647267] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.647484] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.647729] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.648119] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.648338] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.649051] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.649277] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.649642] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.649855] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.650604] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.650847] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.651555] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.651768] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.652503] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.652717] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.653414] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.653588] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.653927] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.654138] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.654424] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.654609] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.654984] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.655200] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.655322] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.655526] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.655647] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.656251] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.656465] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.656751] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.656940] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.657288] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.657492] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.657637] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.657841] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.657963] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.658502] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.658636] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.658775] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.659099] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.659393] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.659755] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.659876] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.660083] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.660222] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.660388] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.660918] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.661377] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.661504] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.661657] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.662010] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.662099] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.662306] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.662523] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.662688] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.663244] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.663708] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.663833] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.663962] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.664327] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.664720] pci 0000:09:00.0: enabling Extended Tags [ 0.665060] pci 0000:09:00.0: supports D1 D2 [ 0.665098] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.665454] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.665608] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.665738] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.666040] pci_bus 0000:0a: extended config space not accessible [ 0.666151] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.666357] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.666528] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.666696] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.667076] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.667241] pci 0000:0a:00.0: supports D1 D2 [ 0.667355] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.667791] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.667929] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.668059] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.668366] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.668567] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.668777] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.668938] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.669483] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.669718] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.669863] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.670081] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.670098] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.670672] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.670890] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.671099] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.671261] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.671771] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.672000] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.672098] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.672317] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.672462] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.672980] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.673180] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.673417] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.673579] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.674090] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.674318] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.674463] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.674681] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.674856] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.675376] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.675578] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.675787] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.675949] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.676477] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.676706] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.676851] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.677069] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.677098] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.677709] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.677835] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.677963] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.678104] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.678573] pci_bus 0000:00: on NUMA node 0 [ 0.678668] xen: registering gsi 13 triggering 1 polarity 0 [ 0.679654] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.679851] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.680042] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.680172] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.680363] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.680482] ACPI: PCI: Interrupt link LNKE disabled [ 0.680667] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.680786] ACPI: PCI: Interrupt link LNKF disabled [ 0.680970] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.681089] ACPI: PCI: Interrupt link LNKG disabled [ 0.681277] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.681428] ACPI: PCI: Interrupt link LNKH disabled [ 0.681695] xen:balloon: Initialising balloon driver [ 0.682188] iommu: Default domain type: Translated [ 0.689101] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.689287] SCSI subsystem initialized [ 0.690124] libata version 3.00 loaded. [ 0.690135] ACPI: bus type USB registered [ 0.690263] usbcore: registered new interface driver usbfs [ 0.690386] usbcore: registered new interface driver hub [ 0.690507] usbcore: registered new device driver usb [ 0.690634] pps_core: LinuxPPS API ver. 1 registered [ 0.690634] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.690634] PTP clock support registered [ 0.691143] Advanced Linux Sound Architecture Driver Initialized. [ 0.691391] NetLabel: Initializing [ 0.691503] NetLabel: domain hash size = 128 [ 0.691615] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.691615] NetLabel: unlabeled traffic allowed by default [ 0.692132] PCI: Using ACPI for IRQ routing [ 0.727227] PCI: pci_cache_line_size set to 64 bytes [ 0.728028] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.728031] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.728136] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.728258] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.728376] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.728525] vgaarb: loaded [ 0.730343] clocksource: Switched to clocksource tsc-early [ 0.730564] VFS: Disk quotas dquot_6.6.0 [ 0.730716] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.730861] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.731019] pnp: PnP ACPI init [ 0.731268] xen: registering gsi 8 triggering 1 polarity 0 [ 0.731462] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.731589] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.731708] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.731851] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.731901] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.731901] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.732229] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.732352] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.732472] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.732593] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.732713] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.732833] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.732953] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.733393] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.733518] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.733636] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.733755] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.733875] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.734324] xen: registering gsi 4 triggering 1 polarity 0 [ 0.734329] Already setup the GSI :4 [ 0.734443] pnp 00:03: [dma 0 disabled] [ 0.734777] xen: registering gsi 3 triggering 1 polarity 0 [ 0.734790] pnp 00:04: [dma 0 disabled] [ 0.735407] pnp: PnP ACPI: found 5 devices [ 0.766748] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.766906] NET: Registered PF_INET protocol family [ 0.767067] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.767462] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.767615] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.767762] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.767919] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.768088] TCP: Hash tables configured (established 4096 bind 4096) [ 0.768271] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.768419] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.768572] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.769007] RPC: Registered named UNIX socket transport module. [ 0.769163] RPC: Registered udp transport module. [ 0.769319] RPC: Registered tcp transport module. [ 0.769433] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.769971] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.770161] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.770326] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.770488] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.770675] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.770850] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.771023] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.771184] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.771353] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.771476] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.771622] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.771766] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.771911] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.772073] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.772237] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.772384] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.772530] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.772652] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.772797] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.772941] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.773086] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.773229] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.773416] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.773560] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.773705] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.773840] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.773974] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.774171] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.774361] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.774535] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.774655] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.774833] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.774994] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.775130] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.775286] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.775451] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.775571] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.775713] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.775878] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.775999] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.776205] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.776373] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.776531] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.776685] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.776838] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.776991] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.777170] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.777332] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.777485] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.777679] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.777799] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.777938] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.778073] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.778267] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.778419] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.778539] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.778658] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.778778] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.778939] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.779059] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.779203] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.779350] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.779471] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.779590] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.779707] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.779826] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.779943] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.780062] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.780203] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.780364] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.780480] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.780599] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.781169] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.781397] xen: registering gsi 19 triggering 0 polarity 1 [ 0.781424] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.790243] xen: registering gsi 18 triggering 0 polarity 1 [ 0.790264] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.806271] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 15707 usecs [ 0.806517] xen: registering gsi 18 triggering 0 polarity 1 [ 0.806523] Already setup the GSI :18 [ 0.822437] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 15600 usecs [ 0.822651] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.822826] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.822898] Unpacking initramfs... [ 0.822967] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.823326] kvm: no hardware support for 'kvm_intel' [ 0.831072] has_svm: not amd or hygon [ 0.831220] kvm: no hardware support for 'kvm_amd' [ 0.831339] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.831588] clocksource: Switched to clocksource tsc [ 0.834189] Initialise system trusted keyrings [ 0.834512] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.836020] NFS: Registering the id_resolver key type [ 0.836148] Key type id_resolver registered [ 0.836260] Key type id_legacy registered [ 0.836481] 9p: Installing v9fs 9p2000 file system support [ 0.850676] Key type asymmetric registered [ 0.850801] Asymmetric key parser 'x509' registered [ 0.850939] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.851095] io scheduler mq-deadline registered [ 0.851209] io scheduler kyber registered [ 0.852052] xen: registering gsi 16 triggering 0 polarity 1 [ 0.852081] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.852635] xen: registering gsi 16 triggering 0 polarity 1 [ 0.852641] Already setup the GSI :16 [ 0.853251] xen: registering gsi 16 triggering 0 polarity 1 [ 0.853256] Already setup the GSI :16 [ 0.853622] xen: registering gsi 16 triggering 0 polarity 1 [ 0.853626] Already setup the GSI :16 [ 0.853947] xen: registering gsi 16 triggering 0 polarity 1 [ 0.853951] Already setup the GSI :16 [ 0.854569] xen: registering gsi 16 triggering 0 polarity 1 [ 0.854574] Already setup the GSI :16 [ 0.855195] xen: registering gsi 16 triggering 0 polarity 1 [ 0.855201] Already setup the GSI :16 [ 0.855655] xen: registering gsi 17 triggering 0 polarity 1 [ 0.855672] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.856014] xen: registering gsi 19 triggering 0 polarity 1 [ 0.856019] Already setup the GSI :19 [ 0.856488] xen: registering gsi 16 triggering 0 polarity 1 [ 0.856493] Already setup the GSI :16 [ 0.857162] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.857338] ACPI: button: Power Button [PWRB] [ 0.857486] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.857723] ACPI: button: Power Button [PWRF] [ 0.858009] Monitor-Mwait will be used to enter C-1 state [ 0.858044] Monitor-Mwait will be used to enter C-2 state [ 0.858060] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.858488] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.858928] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.859465] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.859893] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.860207] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.860681] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.861188] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.862067] xen:xen_evtchn: Event-channel device installed [ 0.862265] xen_pciback: backend is vpci [ 0.862952] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.863265] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.864009] hpet_acpi_add: no address or irqs in _CRS [ 0.864243] Non-volatile memory driver v1.3 [ 0.864356] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.866941] loop: module loaded [ 0.872996] ahci 0000:00:1f.2: version 3.0 [ 0.873097] xen: registering gsi 16 triggering 0 polarity 1 [ 0.873106] Already setup the GSI :16 [ 0.873431] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.873599] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.889181] scsi host0: ahci [ 0.889543] scsi host1: ahci [ 0.889888] scsi host2: ahci [ 0.890203] scsi host3: ahci [ 0.890517] scsi host4: ahci [ 0.890860] scsi host5: ahci [ 0.891006] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 0.891153] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 0.891298] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 0.891442] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 0.891597] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 0.891742] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 0.892208] tun: Universal TUN/TAP device driver, 1.6 [ 0.892545] e100: Intel(R) PRO/100 Network Driver [ 0.892703] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.892887] sky2: driver version 1.30 [ 0.893157] xen_netfront: Initialising Xen virtual ethernet driver [ 0.893700] xen: registering gsi 18 triggering 0 polarity 1 [ 0.893711] Already setup the GSI :18 [ 0.893922] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.894150] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.894328] ehci-pci 0000:00:1a.0: debug port 2 [ 0.898474] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.905614] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.905890] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.906047] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.906191] usb usb1: Product: EHCI Host Controller [ 0.906306] usb usb1: Manufacturer: Linux 6.1.96 ehci_hcd [ 0.906422] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.906735] hub 1-0:1.0: USB hub found [ 0.906862] hub 1-0:1.0: 2 ports detected [ 0.907229] xen: registering gsi 18 triggering 0 polarity 1 [ 0.907238] Already setup the GSI :18 [ 0.907433] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.907627] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.907803] ehci-pci 0000:00:1d.0: debug port 2 [ 0.911889] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.918612] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.918855] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.919004] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.919148] usb usb2: Product: EHCI Host Controller [ 0.919263] usb usb2: Manufacturer: Linux 6.1.96 ehci_hcd [ 0.919379] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.919660] hub 2-0:1.0: USB hub found [ 0.919785] hub 2-0:1.0: 2 ports detected [ 0.920224] xen: registering gsi 19 triggering 0 polarity 1 [ 0.920233] Already setup the GSI :19 [ 0.920441] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.920644] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.921861] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.922328] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.922531] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.922699] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.922905] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.923052] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.923196] usb usb3: Product: xHCI Host Controller [ 0.923311] usb usb3: Manufacturer: Linux 6.1.96 xhci-hcd [ 0.923427] usb usb3: SerialNumber: 0000:00:14.0 [ 0.923716] hub 3-0:1.0: USB hub found [ 0.923849] hub 3-0:1.0: 8 ports detected [ 0.925027] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.925181] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.925325] usb usb4: Product: xHCI Host Controller [ 0.925442] usb usb4: Manufacturer: Linux 6.1.96 xhci-hcd [ 0.925591] usb usb4: SerialNumber: 0000:00:14.0 [ 0.925850] hub 4-0:1.0: USB hub found [ 0.925982] hub 4-0:1.0: 6 ports detected [ 0.927216] usbcore: registered new interface driver usblp [ 0.927361] usbcore: registered new interface driver usb-storage [ 0.927515] i8042: PNP: No PS/2 controller found. [ 0.927914] rtc_cmos 00:00: RTC can wake from S4 [ 0.928480] Freeing initrd memory: 19884K [ 0.928598] rtc_cmos 00:00: registered as rtc0 [ 0.928777] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.928989] device-mapper: uevent: version 1.0.3 [ 0.929100] xen: registering gsi 18 triggering 0 polarity 1 [ 0.929113] Already setup the GSI :18 [ 0.929207] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.929263] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.929379] intel_pstate: CPU model not supported [ 0.929411] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.929511] hid: raw HID events driver (C) Jiri Kosina [ 0.929985] usbcore: registered new interface driver usbhid [ 0.930088] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.930102] usbhid: USB HID core driver [ 0.930878] Initializing XFRM netlink socket [ 0.931145] NET: Registered PF_INET6 protocol family [ 0.931732] Segment Routing with IPv6 [ 0.931855] In-situ OAM (IOAM) with IPv6 [ 0.932000] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.932243] NET: Registered PF_PACKET protocol family [ 0.932401] 9pnet: Installing 9P2000 support [ 0.932527] Key type dns_resolver registered [ 0.933278] IPI shorthand broadcast: enabled [ 0.933417] sched_clock: Marking stable (895687173, 37551371)->(1782355066, -849116522) [ 0.933982] registered taskstats version 1 [ 0.934099] Loading compiled-in X.509 certificates [ 0.936693] PM: Magic number: 12:540:686 [ 0.936925] printk: console [netcon0] enabled [ 0.937041] netconsole: network logging started [ 0.937379] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.948984] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.949353] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.950035] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.950213] ALSA device list: [ 0.950333] No soundcards found. [ 1.143704] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.159613] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.167643] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.204769] ata1: SATA link down (SStatus 0 SControl 300) [ 1.205041] ata6: SATA link down (SStatus 0 SControl 300) [ 1.205198] ata5: SATA link down (SStatus 0 SControl 300) [ 1.205338] ata4: SATA link down (SStatus 0 SControl 300) [ 1.205496] ata2: SATA link down (SStatus 0 SControl 300) [ 1.205664] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.207054] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.232637] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.232818] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.260567] ata3.00: configured for UDMA/133 [ 1.260909] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.261776] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.261886] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.262102] sd 2:0:0:0: [sda] Write Protect is off [ 1.262226] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.262286] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.262523] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.280039] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.280192] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.280566] hub 1-1:1.0: USB hub found [ 1.280788] hub 1-1:1.0: 4 ports detected [ 1.281551] sda: sda1 sda2 < sda5 > [ 1.281968] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.283124] Freeing unused kernel image (initmem) memory: 1576K [ 1.283274] Write protecting the kernel read-only data: 22528k [ 1.301818] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.302065] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.302215] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.303508] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.303819] hub 2-1:1.0: USB hub found [ 1.304040] hub 2-1:1.0: 4 ports detected [ 1.304282] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.304430] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.304568] usb 3-3: Product: USB2.0 Hub [ 1.305370] hub 3-3:1.0: USB hub found [ 1.305828] hub 3-3:1.0: 4 ports detected [ 1.421595] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.547868] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.548021] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.548631] hub 3-4:1.0: USB hub found [ 1.548840] hub 3-4:1.0: 4 ports detected [ 1.611592] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.689033] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.689185] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.689330] usb 3-3.2: Product: USB2.0 Hub [ 1.690002] hub 3-3.2:1.0: USB hub found [ 1.690447] hub 3-3.2:1.0: 4 ports detected [ 1.760325] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.760457] Run /init as init process [ 1.760582] with arguments: [ 1.760583] /init [ 1.760584] placeholder [ 1.760585] with environment: [ 1.760586] HOME=/ [ 1.760587] TERM=linux [ 1.841609] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.947974] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.948137] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.954027] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 2.005838] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 2.008723] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 2.009099] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.200117] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.200299] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.200794] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.201086] xen: registering gsi 16 triggering 0 polarity 1 [ 2.201100] Already setup the GSI :16 [ 2.204610] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.204764] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.205075] xen: registering gsi 16 triggering 0 polarity 1 [ 2.205088] Already setup the GSI :16 [ 2.231724] pps pps0: new PPS source ptp0 [ 2.231910] igb 0000:07:00.0: added PHC on eth0 [ 2.232043] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.232165] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.232330] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.232446] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.232719] xen: registering gsi 17 triggering 0 polarity 1 [ 2.232728] Already setup the GSI :17 [ 2.262304] pps pps1: new PPS source ptp1 [ 2.262510] igb 0000:08:00.0: added PHC on eth1 [ 2.262661] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.262783] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.262949] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.263065] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.263294] xen: registering gsi 16 triggering 0 polarity 1 [ 2.263302] Already setup the GSI :16 [ 2.320810] igb 0000:0b:00.0: added PHC on eth2 [ 2.320951] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.321072] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.321276] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.321392] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.321634] xen: registering gsi 17 triggering 0 polarity 1 [ 2.321643] Already setup the GSI :17 [ 2.377401] igb 0000:0b:00.1: added PHC on eth3 [ 2.377540] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.377677] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.377884] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.378000] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.378237] xen: registering gsi 18 triggering 0 polarity 1 [ 2.378246] Already setup the GSI :18 [ 2.436246] igb 0000:0b:00.2: added PHC on eth4 [ 2.436389] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.436511] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.436734] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.436852] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.437101] xen: registering gsi 19 triggering 0 polarity 1 [ 2.437110] Already setup the GSI :19 [ 2.494579] igb 0000:0b:00.3: added PHC on eth5 [ 2.494718] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.494839] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.495043] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.495165] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.497529] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.511113] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.522686] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.529969] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.540964] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.553830] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 2.933946] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.078963] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.079089] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.371464] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.371843] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.372062] xen: registering gsi 17 triggering 0 polarity 1 [ 3.372072] Already setup the GSI :17 [ 4.109916] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.239700] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.239894] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.531555] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.534192] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 4.541789] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.957669] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 4.966308] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.506820] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.613891] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.635506] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.713782] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.254359] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.254589] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.254821] device enx0cc47a9f87be entered promiscuous mode [ 14.763185] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 14.869897] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 14.870127] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 14.870251] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 14.870527] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready