[ 0.000000] Linux version 6.1.96 (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Thu Jun 27 13:27:14 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000459] tsc: Detected 2199.998 MHz processor [ 0.000903] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000906] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000913] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000915] Disabled [ 0.000916] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000920] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000959] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027745] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.027754] ACPI: Early table checksum verification disabled [ 0.028354] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028366] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028402] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028450] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028466] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028482] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028498] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028514] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028530] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028546] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028563] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028579] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028595] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028611] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028627] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028643] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028659] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028680] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028696] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028712] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028728] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028743] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028752] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028754] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028755] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028756] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028757] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028758] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028759] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028760] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028760] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028761] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028762] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028763] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028764] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028765] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028766] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028767] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028768] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028769] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028773] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028774] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028819] Setting APIC routing to Xen PV. [ 0.032776] Zone ranges: [ 0.032777] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032780] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032782] Normal empty [ 0.032783] Movable zone start for each node [ 0.032784] Early memory node ranges [ 0.032784] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032786] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032788] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032793] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032831] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034377] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034381] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221896] Remapped 102 page(s) [ 0.223268] ACPI: PM-Timer IO Port: 0x408 [ 0.223322] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223324] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223326] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223327] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223329] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223331] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223332] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223333] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223362] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223375] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223378] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223404] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223409] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223479] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223494] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223496] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223497] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223499] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223504] Booting kernel on Xen [ 0.223505] Xen version: 4.19-unstable (preserve-AD) [ 0.223508] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229739] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.230023] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.230030] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.230033] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230111] xen: PV spinlocks enabled [ 0.230114] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230119] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230121] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230159] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230170] random: crng init done [ 0.230218] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230243] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231563] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231566] software IO TLB: area num 8. [ 0.291115] Memory: 390032K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1576K init, 1296K bss, 134000K reserved, 0K cma-reserved) [ 0.291283] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.293791] Dynamic Preempt: voluntary [ 0.293891] rcu: Preemptible hierarchical RCU implementation. [ 0.293892] rcu: RCU event tracing is enabled. [ 0.293892] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.293894] Trampoline variant of Tasks RCU enabled. [ 0.293895] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.293896] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.304391] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.304516] xen:events: Using FIFO-based ABI [ 0.304540] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.304549] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.304556] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.304564] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.304571] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.304579] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.304586] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.304594] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.304601] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.304609] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.304616] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.304624] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.304632] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.304641] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.304648] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.304660] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.310025] Console: colour VGA+ 80x25 [ 0.324852] printk: console [tty0] enabled [ 0.326186] printk: console [hvc0] enabled [ 0.326324] ACPI: Core revision 20220331 [ 0.341777] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.341944] Xen: using vcpuop timer interface [ 0.341952] installing Xen timer for CPU 0 [ 0.342101] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.342261] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199998) [ 0.342591] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.342708] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.342836] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.342986] Spectre V2 : Mitigation: Retpolines [ 0.343268] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.343448] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.343567] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.343689] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.343838] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.343957] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.344109] MDS: Mitigation: Clear CPU buffers [ 0.344223] TAA: Mitigation: Clear CPU buffers [ 0.344265] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.344431] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.344578] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.344730] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.344850] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.344970] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.362672] Freeing SMP alternatives memory: 40K [ 0.362800] pid_max: default: 32768 minimum: 301 [ 0.363282] LSM: Security Framework initializing [ 0.363406] SELinux: Initializing. [ 0.363553] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363701] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364353] cpu 0 spinlock event irq 25 [ 0.364473] VPMU disabled by hypervisor. [ 0.364909] cblist_init_generic: Setting adjustable number of callback queues. [ 0.365056] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.365213] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.365266] signal: max sigframe size: 1776 [ 0.365430] rcu: Hierarchical SRCU implementation. [ 0.365555] rcu: Max phase no-delay instances is 400. [ 0.366046] smp: Bringing up secondary CPUs ... [ 0.366381] installing Xen timer for CPU 1 [ 0.366850] cpu 1 spinlock event irq 35 [ 0.367402] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.367571] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.367761] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.368484] installing Xen timer for CPU 2 [ 0.368950] cpu 2 spinlock event irq 41 [ 0.369349] installing Xen timer for CPU 3 [ 0.369777] cpu 3 spinlock event irq 47 [ 0.369777] installing Xen timer for CPU 4 [ 0.370602] cpu 4 spinlock event irq 53 [ 0.370602] installing Xen timer for CPU 5 [ 0.371426] cpu 5 spinlock event irq 59 [ 0.371467] installing Xen timer for CPU 6 [ 0.372305] cpu 6 spinlock event irq 65 [ 0.372514] installing Xen timer for CPU 7 [ 0.372968] cpu 7 spinlock event irq 71 [ 0.373496] smp: Brought up 1 node, 8 CPUs [ 0.373623] smpboot: Max logical packages: 1 [ 0.373842] devtmpfs: initialized [ 0.373842] x86/mm: Memory block size: 128MB [ 0.374500] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.374528] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.374695] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.375265] PM: RTC time: 14:20:04, date: 2024-06-27 [ 0.375526] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.375674] xen:grant_table: Grant tables using version 1 layout [ 0.375811] Grant table initialized [ 0.376114] audit: initializing netlink subsys (disabled) [ 0.376284] audit: type=2000 audit(1719498005.067:1): state=initialized audit_enabled=0 res=1 [ 0.376334] thermal_sys: Registered thermal governor 'step_wise' [ 0.376334] thermal_sys: Registered thermal governor 'user_space' [ 0.376462] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.376890] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.377268] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.504383] PCI: Using configuration type 1 for base access [ 0.507026] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.507340] ACPI: Added _OSI(Module Device) [ 0.507444] ACPI: Added _OSI(Processor Device) [ 0.507558] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.507672] ACPI: Added _OSI(Processor Aggregator Device) [ 0.538175] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.540142] xen: registering gsi 9 triggering 0 polarity 0 [ 0.542724] ACPI: Dynamic OEM Table Load: [ 0.550532] ACPI: Interpreter enabled [ 0.550665] ACPI: PM: (supports S0 S4 S5) [ 0.550778] ACPI: Using IOAPIC for interrupt routing [ 0.550924] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.551075] PCI: Using E820 reservations for host bridge windows [ 0.551656] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.587872] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.588002] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.588240] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.588412] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.588552] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.588745] PCI host bridge to bus 0000:ff [ 0.588858] pci_bus 0000:ff: root bus resource [bus ff] [ 0.589052] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.589599] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.590058] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.590484] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.590925] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.591381] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.591803] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.591803] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.591946] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.592259] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.592259] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.593481] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.593909] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.594360] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.594797] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.595218] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.595568] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.596214] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.597402] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.597862] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.597862] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.597862] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.598259] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.598259] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.599469] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.600152] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.600571] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.601004] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.601494] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.601966] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.602459] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.602918] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.603344] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.603768] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.604425] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.604858] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.605353] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.605819] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.606287] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.607009] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.607439] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.608080] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.608508] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.608757] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.609195] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.609601] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.610027] pci_bus 0000:ff: on NUMA node 0 [ 0.614581] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.614933] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.615212] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.615490] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.615803] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.616303] PCI host bridge to bus 0000:00 [ 0.616418] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.616540] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.616661] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.616807] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.616957] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.617141] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.617816] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.618344] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.618714] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.619265] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.619848] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.620387] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.620744] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.621259] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.621671] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.622196] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.622707] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.623257] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.623831] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.624437] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.625061] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.625755] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.625973] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.626439] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.626783] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.627001] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.627679] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.627987] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.628205] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.628634] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.628993] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.630345] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.630885] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.631208] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.631720] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.631921] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.632044] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.639447] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.640027] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.640228] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.640273] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.640600] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.641176] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.641343] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.641466] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.641775] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.642350] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.642550] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.642672] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.643016] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.643248] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.643680] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.644003] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.644788] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.644982] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.645141] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.645301] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.645459] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.645618] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.645806] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.646118] pci 0000:00:1f.2: PME# supported from D3hot [ 0.646404] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.646622] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.646867] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.647270] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.647489] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.648204] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.648469] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.648802] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.649015] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.649789] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.650020] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.650745] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.650962] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.651700] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.651914] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.652640] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.652775] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.653116] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.653331] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.653617] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.653802] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.654183] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.654366] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.654489] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.654694] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.654815] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.655416] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.655630] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.655916] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.656101] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.656450] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.656677] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.656799] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.657003] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.657124] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.657667] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.657802] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.657941] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.658281] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.658575] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.658937] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.659058] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.659272] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.659518] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.659684] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.660215] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.660609] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.660768] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.660897] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.661251] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.661265] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.661472] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.661689] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.661855] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.662410] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.662875] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.663002] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.663131] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.663501] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.663894] pci 0000:09:00.0: enabling Extended Tags [ 0.664235] pci 0000:09:00.0: supports D1 D2 [ 0.664264] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.664643] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.664770] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.664899] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.665201] pci_bus 0000:0a: extended config space not accessible [ 0.665318] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.665524] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.665692] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.665860] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.666246] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.666407] pci 0000:0a:00.0: supports D1 D2 [ 0.666520] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.666957] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.667096] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.667250] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.667531] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.667733] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.667942] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.668104] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.668649] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.668888] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.669034] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.669253] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.669398] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.669990] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.670191] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.670354] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.670516] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.671028] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.671287] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.671433] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.671651] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.671796] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.672318] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.672546] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.672756] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.672918] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.673431] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.673660] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.673806] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.674048] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.674193] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.674627] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.674829] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.675038] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.675229] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.675655] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.675885] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.676030] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.676248] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.676264] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.676878] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.677005] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.677134] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.677274] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.677771] pci_bus 0000:00: on NUMA node 0 [ 0.677868] xen: registering gsi 13 triggering 1 polarity 0 [ 0.678847] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.679043] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.679271] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.679463] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.679655] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.679774] ACPI: PCI: Interrupt link LNKE disabled [ 0.679958] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.680077] ACPI: PCI: Interrupt link LNKF disabled [ 0.680266] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.680385] ACPI: PCI: Interrupt link LNKG disabled [ 0.680597] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.680716] ACPI: PCI: Interrupt link LNKH disabled [ 0.680983] xen:balloon: Initialising balloon driver [ 0.681350] iommu: Default domain type: Translated [ 0.688265] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.688454] SCSI subsystem initialized [ 0.689311] libata version 3.00 loaded. [ 0.689313] ACPI: bus type USB registered [ 0.689443] usbcore: registered new interface driver usbfs [ 0.689566] usbcore: registered new interface driver hub [ 0.689689] usbcore: registered new device driver usb [ 0.689689] pps_core: LinuxPPS API ver. 1 registered [ 0.689689] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.689689] PTP clock support registered [ 0.690309] Advanced Linux Sound Architecture Driver Initialized. [ 0.690559] NetLabel: Initializing [ 0.690671] NetLabel: domain hash size = 128 [ 0.690671] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.690671] NetLabel: unlabeled traffic allowed by default [ 0.691292] PCI: Using ACPI for IRQ routing [ 0.726536] PCI: pci_cache_line_size set to 64 bytes [ 0.727344] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.727346] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.727369] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.727423] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.727541] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.727692] vgaarb: loaded [ 0.729655] clocksource: Switched to clocksource tsc-early [ 0.729871] VFS: Disk quotas dquot_6.6.0 [ 0.729996] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.730141] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.730141] pnp: PnP ACPI init [ 0.730404] xen: registering gsi 8 triggering 1 polarity 0 [ 0.730566] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.730691] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.730810] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.730913] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.730913] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.730913] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.731300] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.731432] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.731553] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.731673] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.731794] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.731947] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.732068] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.732497] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.732622] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.732741] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.732860] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.732978] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.733444] xen: registering gsi 4 triggering 1 polarity 0 [ 0.733449] Already setup the GSI :4 [ 0.733563] pnp 00:03: [dma 0 disabled] [ 0.733877] xen: registering gsi 3 triggering 1 polarity 0 [ 0.733889] pnp 00:04: [dma 0 disabled] [ 0.734507] pnp: PnP ACPI: found 5 devices [ 0.766546] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.766733] NET: Registered PF_INET protocol family [ 0.766893] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.767299] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.767473] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.767647] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.767800] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.767973] TCP: Hash tables configured (established 4096 bind 4096) [ 0.768128] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.768250] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.768429] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.768849] RPC: Registered named UNIX socket transport module. [ 0.768976] RPC: Registered udp transport module. [ 0.769090] RPC: Registered tcp transport module. [ 0.769204] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.769751] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.769924] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.770088] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.770251] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.770421] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.770599] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.770773] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.770908] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.771072] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.771196] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.771367] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.771515] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.771661] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.771784] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.771929] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.772074] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.772225] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.772362] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.772507] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.772652] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.772797] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.772920] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.773065] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.773209] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.773375] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.773513] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.773659] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.773831] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.774004] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.774179] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.774315] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.774471] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.774635] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.774755] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.774895] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.775090] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.775210] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.775381] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.775549] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.775670] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.775810] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.775988] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.776147] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.776325] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.776479] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.776633] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.776786] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.776940] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.777093] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.777248] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.777382] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.777527] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.777661] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.777841] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.777991] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.778111] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.778230] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.778376] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.778500] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.778620] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.778740] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.778885] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.779002] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.779128] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.779245] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.779376] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.779493] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.779613] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.779730] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.779849] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.779966] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.780085] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.780658] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.780881] xen: registering gsi 19 triggering 0 polarity 1 [ 0.780908] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.789752] xen: registering gsi 18 triggering 0 polarity 1 [ 0.789771] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.806479] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 16386 usecs [ 0.806724] xen: registering gsi 18 triggering 0 polarity 1 [ 0.806730] Already setup the GSI :18 [ 0.823704] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 16636 usecs [ 0.823919] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.824097] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.824149] Unpacking initramfs... [ 0.824217] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.824581] kvm: no hardware support for 'kvm_intel' [ 0.832459] has_svm: not amd or hygon [ 0.832575] kvm: no hardware support for 'kvm_amd' [ 0.832692] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.833233] clocksource: Switched to clocksource tsc [ 0.835971] Initialise system trusted keyrings [ 0.836293] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.837782] NFS: Registering the id_resolver key type [ 0.837915] Key type id_resolver registered [ 0.838030] Key type id_legacy registered [ 0.838234] 9p: Installing v9fs 9p2000 file system support [ 0.851673] Key type asymmetric registered [ 0.851806] Asymmetric key parser 'x509' registered [ 0.851944] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.852100] io scheduler mq-deadline registered [ 0.852215] io scheduler kyber registered [ 0.853033] xen: registering gsi 16 triggering 0 polarity 1 [ 0.853065] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.853632] xen: registering gsi 16 triggering 0 polarity 1 [ 0.853638] Already setup the GSI :16 [ 0.854243] xen: registering gsi 16 triggering 0 polarity 1 [ 0.854248] Already setup the GSI :16 [ 0.854594] xen: registering gsi 16 triggering 0 polarity 1 [ 0.854610] Already setup the GSI :16 [ 0.854932] xen: registering gsi 16 triggering 0 polarity 1 [ 0.854936] Already setup the GSI :16 [ 0.855539] xen: registering gsi 16 triggering 0 polarity 1 [ 0.855544] Already setup the GSI :16 [ 0.856172] xen: registering gsi 16 triggering 0 polarity 1 [ 0.856177] Already setup the GSI :16 [ 0.856629] xen: registering gsi 17 triggering 0 polarity 1 [ 0.856647] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.856981] xen: registering gsi 19 triggering 0 polarity 1 [ 0.856986] Already setup the GSI :19 [ 0.857449] xen: registering gsi 16 triggering 0 polarity 1 [ 0.857454] Already setup the GSI :16 [ 0.858125] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.858301] ACPI: button: Power Button [PWRB] [ 0.858444] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.858730] ACPI: button: Power Button [PWRF] [ 0.859015] Monitor-Mwait will be used to enter C-1 state [ 0.859051] Monitor-Mwait will be used to enter C-2 state [ 0.859067] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.859471] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.859793] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.860298] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.860683] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.861108] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.861552] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.862143] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.862992] xen:xen_evtchn: Event-channel device installed [ 0.863188] xen_pciback: backend is vpci [ 0.863975] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.864294] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.865082] hpet_acpi_add: no address or irqs in _CRS [ 0.865299] Non-volatile memory driver v1.3 [ 0.865414] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.868051] loop: module loaded [ 0.875064] ahci 0000:00:1f.2: version 3.0 [ 0.875164] xen: registering gsi 16 triggering 0 polarity 1 [ 0.875173] Already setup the GSI :16 [ 0.875514] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.875696] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.891293] scsi host0: ahci [ 0.891652] scsi host1: ahci [ 0.891961] scsi host2: ahci [ 0.892306] scsi host3: ahci [ 0.892617] scsi host4: ahci [ 0.893008] scsi host5: ahci [ 0.893169] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 0.893317] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 0.893467] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 0.893627] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 0.893772] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 0.893917] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 0.894433] tun: Universal TUN/TAP device driver, 1.6 [ 0.894714] e100: Intel(R) PRO/100 Network Driver [ 0.894849] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.894989] sky2: driver version 1.30 [ 0.895178] xen_netfront: Initialising Xen virtual ethernet driver [ 0.895562] xen: registering gsi 18 triggering 0 polarity 1 [ 0.895572] Already setup the GSI :18 [ 0.895796] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.895992] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.896175] ehci-pci 0000:00:1a.0: debug port 2 [ 0.900309] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.906655] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.906877] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.907027] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.907172] usb usb1: Product: EHCI Host Controller [ 0.907293] usb usb1: Manufacturer: Linux 6.1.96 ehci_hcd [ 0.907409] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.907717] hub 1-0:1.0: USB hub found [ 0.907842] hub 1-0:1.0: 2 ports detected [ 0.908208] xen: registering gsi 18 triggering 0 polarity 1 [ 0.908218] Already setup the GSI :18 [ 0.908409] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.908652] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.908828] ehci-pci 0000:00:1d.0: debug port 2 [ 0.912927] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.919652] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.919879] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.920028] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.920173] usb usb2: Product: EHCI Host Controller [ 0.920288] usb usb2: Manufacturer: Linux 6.1.96 ehci_hcd [ 0.920404] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.920708] hub 2-0:1.0: USB hub found [ 0.920833] hub 2-0:1.0: 2 ports detected [ 0.921262] xen: registering gsi 19 triggering 0 polarity 1 [ 0.921271] Already setup the GSI :19 [ 0.921477] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.921698] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.922916] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.923385] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.923613] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.923761] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.923976] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.924124] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.924269] usb usb3: Product: xHCI Host Controller [ 0.924384] usb usb3: Manufacturer: Linux 6.1.96 xhci-hcd [ 0.924500] usb usb3: SerialNumber: 0000:00:14.0 [ 0.924797] hub 3-0:1.0: USB hub found [ 0.924930] hub 3-0:1.0: 8 ports detected [ 0.926104] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.926258] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.926403] usb usb4: Product: xHCI Host Controller [ 0.926517] usb usb4: Manufacturer: Linux 6.1.96 xhci-hcd [ 0.926651] usb usb4: SerialNumber: 0000:00:14.0 [ 0.926913] hub 4-0:1.0: USB hub found [ 0.927045] hub 4-0:1.0: 6 ports detected [ 0.928252] usbcore: registered new interface driver usblp [ 0.928398] usbcore: registered new interface driver usb-storage [ 0.928552] i8042: PNP: No PS/2 controller found. [ 0.928951] rtc_cmos 00:00: RTC can wake from S4 [ 0.929648] rtc_cmos 00:00: registered as rtc0 [ 0.929832] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.930066] device-mapper: uevent: version 1.0.3 [ 0.930108] Freeing initrd memory: 19884K [ 0.930326] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.930353] xen: registering gsi 18 triggering 0 polarity 1 [ 0.930480] intel_pstate: CPU model not supported [ 0.930485] Already setup the GSI :18 [ 0.930499] hid: raw HID events driver (C) Jiri Kosina [ 0.930669] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.930869] usbcore: registered new interface driver usbhid [ 0.930995] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.931086] usbhid: USB HID core driver [ 0.931511] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.931772] Initializing XFRM netlink socket [ 0.932014] NET: Registered PF_INET6 protocol family [ 0.932662] Segment Routing with IPv6 [ 0.932784] In-situ OAM (IOAM) with IPv6 [ 0.932928] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.933171] NET: Registered PF_PACKET protocol family [ 0.933324] 9pnet: Installing 9P2000 support [ 0.933450] Key type dns_resolver registered [ 0.934212] IPI shorthand broadcast: enabled [ 0.934353] sched_clock: Marking stable (896576403, 37597273)->(1781536455, -847362779) [ 0.934952] registered taskstats version 1 [ 0.935096] Loading compiled-in X.509 certificates [ 0.937662] PM: Magic number: 12:784:334 [ 0.937824] tty tty55: hash matches [ 0.938020] printk: console [netcon0] enabled [ 0.938136] netconsole: network logging started [ 0.938473] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.950384] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.950768] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.951437] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.951632] ALSA device list: [ 0.951776] No soundcards found. [ 1.143660] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.159729] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.167759] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.204963] ata4: SATA link down (SStatus 0 SControl 300) [ 1.205226] ata2: SATA link down (SStatus 0 SControl 300) [ 1.205395] ata6: SATA link down (SStatus 0 SControl 300) [ 1.205550] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.205720] ata5: SATA link down (SStatus 0 SControl 300) [ 1.205876] ata1: SATA link down (SStatus 0 SControl 300) [ 1.206884] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.234475] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.234777] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.262389] ata3.00: configured for UDMA/133 [ 1.262715] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.263594] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.263686] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.263939] sd 2:0:0:0: [sda] Write Protect is off [ 1.264065] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.264131] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.264365] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.272375] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.272530] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.272897] hub 1-1:1.0: USB hub found [ 1.273121] hub 1-1:1.0: 4 ports detected [ 1.283399] sda: sda1 sda2 < sda5 > [ 1.283784] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.284993] Freeing unused kernel image (initmem) memory: 1576K [ 1.285121] Write protecting the kernel read-only data: 22528k [ 1.303482] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.303778] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.303960] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.304402] hub 2-1:1.0: USB hub found [ 1.304649] hub 2-1:1.0: 4 ports detected [ 1.304860] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.304881] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.305014] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.305266] usb 3-3: Product: USB2.0 Hub [ 1.306111] hub 3-3:1.0: USB hub found [ 1.306570] hub 3-3:1.0: 4 ports detected [ 1.422644] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.548915] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.549069] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.549691] hub 3-4:1.0: USB hub found [ 1.549903] hub 3-4:1.0: 4 ports detected [ 1.612640] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.690100] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.690256] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.690402] usb 3-3.2: Product: USB2.0 Hub [ 1.691101] hub 3-3.2:1.0: USB hub found [ 1.691562] hub 3-3.2:1.0: 4 ports detected [ 1.765948] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.766077] Run /init as init process [ 1.766188] with arguments: [ 1.766189] /init [ 1.766190] placeholder [ 1.766191] with environment: [ 1.766192] HOME=/ [ 1.766193] TERM=linux [ 1.842664] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.947997] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.948159] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.953974] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 2.006897] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 2.009800] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 2.010128] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.201562] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.201723] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.202230] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.202523] xen: registering gsi 16 triggering 0 polarity 1 [ 2.202536] Already setup the GSI :16 [ 2.207730] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.207893] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.208230] xen: registering gsi 16 triggering 0 polarity 1 [ 2.208244] Already setup the GSI :16 [ 2.235782] pps pps0: new PPS source ptp0 [ 2.235965] igb 0000:07:00.0: added PHC on eth0 [ 2.236099] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.236221] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.236387] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.236506] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.236757] xen: registering gsi 17 triggering 0 polarity 1 [ 2.236766] Already setup the GSI :17 [ 2.266299] pps pps1: new PPS source ptp1 [ 2.266496] igb 0000:08:00.0: added PHC on eth1 [ 2.266644] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.266766] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.266933] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.267049] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.267281] xen: registering gsi 16 triggering 0 polarity 1 [ 2.267288] Already setup the GSI :16 [ 2.325564] igb 0000:0b:00.0: added PHC on eth2 [ 2.325720] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.325848] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.326052] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.326168] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.326397] xen: registering gsi 17 triggering 0 polarity 1 [ 2.326406] Already setup the GSI :17 [ 2.382407] igb 0000:0b:00.1: added PHC on eth3 [ 2.382546] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.382686] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.382891] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.383007] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.383246] xen: registering gsi 18 triggering 0 polarity 1 [ 2.383254] Already setup the GSI :18 [ 2.441272] igb 0000:0b:00.2: added PHC on eth4 [ 2.441416] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.441538] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.441757] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.441874] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.442116] xen: registering gsi 19 triggering 0 polarity 1 [ 2.442125] Already setup the GSI :19 [ 2.499802] igb 0000:0b:00.3: added PHC on eth5 [ 2.499941] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.500062] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.500266] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.500382] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.503509] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.518235] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.525969] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.536813] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.548879] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.561952] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 2.936271] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.079666] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.079904] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.371216] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.371557] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.371799] xen: registering gsi 17 triggering 0 polarity 1 [ 3.371810] Already setup the GSI :17 [ 4.110213] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.246624] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.246904] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.539621] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.541991] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 4.550039] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.961713] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 4.969793] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.487847] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.695535] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.712124] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.807274] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.361408] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.361577] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.361769] device enx0cc47a9f87be entered promiscuous mode [ 14.891287] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 14.997964] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 14.998231] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 14.998355] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 14.998645] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready