[ 0.000000] Linux version 6.1.96 (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Thu Jun 27 13:27:14 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000460] tsc: Detected 2199.996 MHz processor [ 0.000904] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000907] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000914] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000916] Disabled [ 0.000917] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000921] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000960] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027740] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.027748] ACPI: Early table checksum verification disabled [ 0.028347] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028359] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028396] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028444] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028460] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028476] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028492] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028508] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028524] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028540] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028557] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028573] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028589] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028605] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028621] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028637] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028653] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028669] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028689] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028705] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028721] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028736] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028745] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028747] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028748] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028749] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028750] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028751] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028752] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028753] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028754] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028755] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028755] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028756] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028757] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028758] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028759] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028760] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028761] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028762] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028763] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028764] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028810] Setting APIC routing to Xen PV. [ 0.032769] Zone ranges: [ 0.032770] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032772] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032774] Normal empty [ 0.032775] Movable zone start for each node [ 0.032776] Early memory node ranges [ 0.032776] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032778] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032780] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032785] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032822] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034368] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034373] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221877] Remapped 102 page(s) [ 0.223250] ACPI: PM-Timer IO Port: 0x408 [ 0.223303] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223306] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223308] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223309] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223311] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223312] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223314] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223315] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223344] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223357] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223361] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223387] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223391] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223461] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223476] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223478] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223479] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223481] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223486] Booting kernel on Xen [ 0.223486] Xen version: 4.19-unstable (preserve-AD) [ 0.223490] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229766] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.230050] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.230056] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.230060] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230137] xen: PV spinlocks enabled [ 0.230140] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230146] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230148] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230185] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230195] random: crng init done [ 0.230244] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230269] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231587] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231590] software IO TLB: area num 8. [ 0.291107] Memory: 390032K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1576K init, 1296K bss, 134000K reserved, 0K cma-reserved) [ 0.291275] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.293773] Dynamic Preempt: voluntary [ 0.293874] rcu: Preemptible hierarchical RCU implementation. [ 0.293874] rcu: RCU event tracing is enabled. [ 0.293875] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.293877] Trampoline variant of Tasks RCU enabled. [ 0.293878] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.293879] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.304362] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.304486] xen:events: Using FIFO-based ABI [ 0.304510] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.304519] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.304527] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.304535] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.304542] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.304550] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.304557] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.304565] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.304572] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.304579] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.304587] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.304595] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.304602] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.304611] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.304619] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.304630] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.309999] Console: colour VGA+ 80x25 [ 0.324819] printk: console [tty0] enabled [ 0.326154] printk: console [hvc0] enabled [ 0.326294] ACPI: Core revision 20220331 [ 0.341775] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.341942] Xen: using vcpuop timer interface [ 0.341949] installing Xen timer for CPU 0 [ 0.342098] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.342258] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199996) [ 0.342588] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.342705] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.342833] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.342982] Spectre V2 : Mitigation: Retpolines [ 0.343265] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.343421] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.343540] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.343662] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.343811] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.343930] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.344082] MDS: Mitigation: Clear CPU buffers [ 0.344195] TAA: Mitigation: Clear CPU buffers [ 0.344262] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.344428] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.344575] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.344726] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.344846] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.344965] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.362690] Freeing SMP alternatives memory: 40K [ 0.362818] pid_max: default: 32768 minimum: 301 [ 0.363280] LSM: Security Framework initializing [ 0.363404] SELinux: Initializing. [ 0.363550] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363697] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364350] cpu 0 spinlock event irq 25 [ 0.364470] VPMU disabled by hypervisor. [ 0.364904] cblist_init_generic: Setting adjustable number of callback queues. [ 0.365051] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.365208] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.365263] signal: max sigframe size: 1776 [ 0.365427] rcu: Hierarchical SRCU implementation. [ 0.365551] rcu: Max phase no-delay instances is 400. [ 0.366046] smp: Bringing up secondary CPUs ... [ 0.366379] installing Xen timer for CPU 1 [ 0.366848] cpu 1 spinlock event irq 35 [ 0.367399] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.367568] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.367757] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.368482] installing Xen timer for CPU 2 [ 0.368953] cpu 2 spinlock event irq 41 [ 0.369350] installing Xen timer for CPU 3 [ 0.369789] cpu 3 spinlock event irq 47 [ 0.369789] installing Xen timer for CPU 4 [ 0.370599] cpu 4 spinlock event irq 53 [ 0.370599] installing Xen timer for CPU 5 [ 0.371452] cpu 5 spinlock event irq 59 [ 0.371464] installing Xen timer for CPU 6 [ 0.372338] cpu 6 spinlock event irq 65 [ 0.372520] installing Xen timer for CPU 7 [ 0.372949] cpu 7 spinlock event irq 71 [ 0.373514] smp: Brought up 1 node, 8 CPUs [ 0.373635] smpboot: Max logical packages: 1 [ 0.373853] devtmpfs: initialized [ 0.374303] x86/mm: Memory block size: 128MB [ 0.374653] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.374653] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.374687] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.375393] PM: RTC time: 16:53:06, date: 2024-06-27 [ 0.375650] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.375798] xen:grant_table: Grant tables using version 1 layout [ 0.375935] Grant table initialized [ 0.376249] audit: initializing netlink subsys (disabled) [ 0.376400] audit: type=2000 audit(1719507186.857:1): state=initialized audit_enabled=0 res=1 [ 0.376400] thermal_sys: Registered thermal governor 'step_wise' [ 0.376400] thermal_sys: Registered thermal governor 'user_space' [ 0.376457] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.377357] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.377513] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.504701] PCI: Using configuration type 1 for base access [ 0.507339] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.507483] ACPI: Added _OSI(Module Device) [ 0.507483] ACPI: Added _OSI(Processor Device) [ 0.507547] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.507695] ACPI: Added _OSI(Processor Aggregator Device) [ 0.538006] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.540037] xen: registering gsi 9 triggering 0 polarity 0 [ 0.542781] ACPI: Dynamic OEM Table Load: [ 0.550012] ACPI: Interpreter enabled [ 0.550146] ACPI: PM: (supports S0 S4 S5) [ 0.550262] ACPI: Using IOAPIC for interrupt routing [ 0.550408] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.550563] PCI: Using E820 reservations for host bridge windows [ 0.551139] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.588446] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.588576] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.588813] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.589084] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.589205] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.589290] PCI host bridge to bus 0000:ff [ 0.589404] pci_bus 0000:ff: root bus resource [bus ff] [ 0.589597] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.590045] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.590476] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.590899] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.591341] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.591767] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.592188] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.592565] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.593012] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.593453] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.593875] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.594301] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.594727] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.595152] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.595596] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.596018] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.596442] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.596869] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.597128] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.597591] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.598062] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.598530] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.598996] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.599465] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.599932] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.600390] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.600814] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.601245] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.601609] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.602074] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.602542] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.602999] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.603423] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.603846] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.604271] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.604707] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.605175] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.605609] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.606075] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.606591] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.607013] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.607436] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.607865] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.608113] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.608554] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.608981] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.609410] pci_bus 0000:ff: on NUMA node 0 [ 0.613735] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.613862] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.614140] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.614487] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.614612] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.615098] PCI host bridge to bus 0000:00 [ 0.615213] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.615262] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.615383] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.615528] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.615673] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.615852] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.616496] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.617017] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.617388] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.617909] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.618294] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.618810] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.619162] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.620657] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.621032] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.621562] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.621930] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.622450] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.622834] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.623409] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.624032] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.624699] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.624917] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.625389] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.625733] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.625951] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.626414] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.626722] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.626940] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.627402] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.627761] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.627962] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.628500] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.628817] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.629366] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.629566] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.629688] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.637432] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.637987] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.638182] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.638269] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.638557] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.639117] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.639314] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.639437] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.639723] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.640281] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.640476] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.640597] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.640919] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.641117] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.641657] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.641977] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.642731] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.642933] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.643092] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.643250] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.643411] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.643569] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.643727] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.644040] pci 0000:00:1f.2: PME# supported from D3hot [ 0.644325] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.644542] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.644788] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.645170] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.645360] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.646077] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.646366] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.646698] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.646911] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.647667] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.647880] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.648585] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.648799] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.649505] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.649718] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.650418] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.650553] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.650892] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.651105] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.651391] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.651576] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.651926] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.652147] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.652261] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.652466] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.652588] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.653158] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.653355] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.653641] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.653825] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.654174] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.654344] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.654466] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.654670] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.654791] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.655343] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.655478] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.655617] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.655907] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.656199] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.656510] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.656631] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.656838] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.657055] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.657221] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.657672] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.658143] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.658271] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.658400] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.658758] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.658878] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.659084] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.659309] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.659475] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.660005] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.660463] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.660596] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.660724] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.661064] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.661456] pci 0000:09:00.0: enabling Extended Tags [ 0.661796] pci 0000:09:00.0: supports D1 D2 [ 0.661919] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.662279] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.662406] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.662535] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.662837] pci_bus 0000:0a: extended config space not accessible [ 0.663008] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.663213] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.663309] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.663477] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.663831] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.664121] pci 0000:0a:00.0: supports D1 D2 [ 0.664235] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.664584] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.664723] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.664853] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.665241] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.665343] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.665553] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.665714] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.666266] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.666501] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.666647] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.666866] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.667010] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.667579] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.667781] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.667991] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.668153] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.668655] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.668885] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.669030] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.669249] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.669395] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.669918] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.670119] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.670326] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.670488] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.670999] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.671234] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.671261] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.671479] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.671624] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.672142] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.672342] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.672556] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.672718] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.673230] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.673370] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.673516] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.673734] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.673884] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.674474] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.674601] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.674729] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.674870] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.675340] pci_bus 0000:00: on NUMA node 0 [ 0.675435] xen: registering gsi 13 triggering 1 polarity 0 [ 0.676400] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.676600] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.676791] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.676982] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.677173] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.677261] ACPI: PCI: Interrupt link LNKE disabled [ 0.677448] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.677567] ACPI: PCI: Interrupt link LNKF disabled [ 0.677752] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.677875] ACPI: PCI: Interrupt link LNKG disabled [ 0.678078] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.678196] ACPI: PCI: Interrupt link LNKH disabled [ 0.678405] xen:balloon: Initialising balloon driver [ 0.678544] iommu: Default domain type: Translated [ 0.686264] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.686450] SCSI subsystem initialized [ 0.686579] libata version 3.00 loaded. [ 0.686579] ACPI: bus type USB registered [ 0.686579] usbcore: registered new interface driver usbfs [ 0.686579] usbcore: registered new interface driver hub [ 0.686671] usbcore: registered new device driver usb [ 0.686807] pps_core: LinuxPPS API ver. 1 registered [ 0.687262] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.687414] PTP clock support registered [ 0.687550] Advanced Linux Sound Architecture Driver Initialized. [ 0.687552] NetLabel: Initializing [ 0.687664] NetLabel: domain hash size = 128 [ 0.687777] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.688279] NetLabel: unlabeled traffic allowed by default [ 0.688420] PCI: Using ACPI for IRQ routing [ 0.723726] PCI: pci_cache_line_size set to 64 bytes [ 0.724500] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.724502] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.724524] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.724524] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.724546] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.724696] vgaarb: loaded [ 0.726833] clocksource: Switched to clocksource tsc-early [ 0.727048] VFS: Disk quotas dquot_6.6.0 [ 0.727172] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.727172] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.727172] pnp: PnP ACPI init [ 0.727415] xen: registering gsi 8 triggering 1 polarity 0 [ 0.727611] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.727738] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.727738] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.727738] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.727738] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.727738] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.728361] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.728485] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.728605] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.728726] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.728846] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.728967] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.729087] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.729521] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.729648] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.729792] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.729911] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.730030] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.730478] xen: registering gsi 4 triggering 1 polarity 0 [ 0.730484] Already setup the GSI :4 [ 0.730597] pnp 00:03: [dma 0 disabled] [ 0.730909] xen: registering gsi 3 triggering 1 polarity 0 [ 0.730920] pnp 00:04: [dma 0 disabled] [ 0.731512] pnp: PnP ACPI: found 5 devices [ 0.762797] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.762954] NET: Registered PF_INET protocol family [ 0.763121] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.763527] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.763682] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.763830] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.763981] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.764151] TCP: Hash tables configured (established 4096 bind 4096) [ 0.764348] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.764502] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.764655] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.765054] RPC: Registered named UNIX socket transport module. [ 0.765180] RPC: Registered udp transport module. [ 0.765313] RPC: Registered tcp transport module. [ 0.765427] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.765967] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.766140] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.766324] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.766498] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.766646] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.766822] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.766996] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.767136] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.767322] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.767458] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.767604] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.767749] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.767895] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.768017] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.768162] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.768329] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.768491] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.768615] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.768760] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.768904] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.769050] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.769172] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.769347] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.769495] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.769641] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.769776] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.769919] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.770091] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.770277] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.770465] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.770588] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.770728] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.770889] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.771009] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.771148] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.771346] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.771472] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.771614] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.771780] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.771900] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.772039] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.772205] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.772386] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.772542] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.772703] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.772857] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.773010] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.773164] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.773344] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.773503] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.773624] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.773763] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.773898] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.774078] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.774229] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.774374] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.774495] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.774616] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.774737] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.774857] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.774977] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.775121] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.775238] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.775383] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.775530] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.775654] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.775770] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.775890] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.776006] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.776126] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.776242] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.776385] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.776930] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.777152] xen: registering gsi 19 triggering 0 polarity 1 [ 0.777178] xen: --> pirq=19 -> irq=19 (gsi=19) [ 5.077591] pci 0000:00:14.0: quirk_usb_early_handoff+0x0/0x720 took 4199724 usecs [ 5.077829] xen: registering gsi 18 triggering 0 polarity 1 [ 5.077849] xen: --> pirq=18 -> irq=18 (gsi=18) [ 5.094677] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 16506 usecs [ 5.094962] xen: registering gsi 18 triggering 0 polarity 1 [ 5.094967] Already setup the GSI :18 [ 5.112581] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 17260 usecs [ 5.112796] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 5.112971] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 5.113056] Unpacking initramfs... [ 5.113094] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 5.121163] kvm: no hardware support for 'kvm_intel' [ 5.121298] has_svm: not amd or hygon [ 5.121423] kvm: no hardware support for 'kvm_amd' [ 5.121545] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 5.122043] clocksource: Switched to clocksource tsc [ 5.124868] Initialise system trusted keyrings [ 5.125220] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 5.126796] NFS: Registering the id_resolver key type [ 5.126923] Key type id_resolver registered [ 5.127035] Key type id_legacy registered [ 5.127237] 9p: Installing v9fs 9p2000 file system support [ 5.141378] Key type asymmetric registered [ 5.141506] Asymmetric key parser 'x509' registered [ 5.141652] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 5.141809] io scheduler mq-deadline registered [ 5.141924] io scheduler kyber registered [ 5.142981] xen: registering gsi 16 triggering 0 polarity 1 [ 5.143012] xen: --> pirq=16 -> irq=16 (gsi=16) [ 5.143546] xen: registering gsi 16 triggering 0 polarity 1 [ 5.143552] Already setup the GSI :16 [ 5.144173] xen: registering gsi 16 triggering 0 polarity 1 [ 5.144179] Already setup the GSI :16 [ 5.144506] xen: registering gsi 16 triggering 0 polarity 1 [ 5.144510] Already setup the GSI :16 [ 5.144845] xen: registering gsi 16 triggering 0 polarity 1 [ 5.144849] Already setup the GSI :16 [ 5.145456] xen: registering gsi 16 triggering 0 polarity 1 [ 5.145461] Already setup the GSI :16 [ 5.146070] xen: registering gsi 16 triggering 0 polarity 1 [ 5.146075] Already setup the GSI :16 [ 5.146513] xen: registering gsi 17 triggering 0 polarity 1 [ 5.146530] xen: --> pirq=17 -> irq=17 (gsi=17) [ 5.146878] xen: registering gsi 19 triggering 0 polarity 1 [ 5.146883] Already setup the GSI :19 [ 5.147320] xen: registering gsi 16 triggering 0 polarity 1 [ 5.147324] Already setup the GSI :16 [ 5.147997] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 5.148172] ACPI: button: Power Button [PWRB] [ 5.148314] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 5.148560] ACPI: button: Power Button [PWRF] [ 5.148874] Monitor-Mwait will be used to enter C-1 state [ 5.148910] Monitor-Mwait will be used to enter C-2 state [ 5.148926] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 5.149257] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 5.149676] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 5.150038] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 5.150398] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 5.150764] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 5.151256] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 5.151852] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 5.152584] xen:xen_evtchn: Event-channel device installed [ 5.152852] xen_pciback: backend is vpci [ 5.153606] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 5.153932] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 5.154682] hpet_acpi_add: no address or irqs in _CRS [ 5.154873] Non-volatile memory driver v1.3 [ 5.154987] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 5.157661] loop: module loaded [ 5.163928] ahci 0000:00:1f.2: version 3.0 [ 5.164029] xen: registering gsi 16 triggering 0 polarity 1 [ 5.164039] Already setup the GSI :16 [ 5.164363] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 5.164515] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 5.180350] scsi host0: ahci [ 5.180808] scsi host1: ahci [ 5.181209] scsi host2: ahci [ 5.181539] scsi host3: ahci [ 5.181876] scsi host4: ahci [ 5.182195] scsi host5: ahci [ 5.182338] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 5.182485] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 5.182646] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 5.182791] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 5.182936] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 5.183081] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 5.183517] tun: Universal TUN/TAP device driver, 1.6 [ 5.183784] e100: Intel(R) PRO/100 Network Driver [ 5.183903] e100: Copyright(c) 1999-2006 Intel Corporation [ 5.184072] sky2: driver version 1.30 [ 5.184262] xen_netfront: Initialising Xen virtual ethernet driver [ 5.184656] xen: registering gsi 18 triggering 0 polarity 1 [ 5.184666] Already setup the GSI :18 [ 5.184874] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.185106] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.185283] ehci-pci 0000:00:1a.0: debug port 2 [ 5.189416] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 5.195684] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.195957] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.196106] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.196251] usb usb1: Product: EHCI Host Controller [ 5.196366] usb usb1: Manufacturer: Linux 6.1.96 ehci_hcd [ 5.196487] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.196773] hub 1-0:1.0: USB hub found [ 5.196898] hub 1-0:1.0: 2 ports detected [ 5.197261] xen: registering gsi 18 triggering 0 polarity 1 [ 5.197270] Already setup the GSI :18 [ 5.197463] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.197695] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.197894] ehci-pci 0000:00:1d.0: debug port 2 [ 5.201977] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 5.208679] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.208921] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.209071] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.209215] usb usb2: Product: EHCI Host Controller [ 5.209330] usb usb2: Manufacturer: Linux 6.1.96 ehci_hcd [ 5.209445] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.209730] hub 2-0:1.0: USB hub found [ 5.209855] hub 2-0:1.0: 2 ports detected [ 5.210286] xen: registering gsi 19 triggering 0 polarity 1 [ 5.210295] Already setup the GSI :19 [ 5.210513] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 5.210713] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 5.211933] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 5.212399] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 5.212599] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 5.212760] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 5.212966] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.213123] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.213267] usb usb3: Product: xHCI Host Controller [ 5.213382] usb usb3: Manufacturer: Linux 6.1.96 xhci-hcd [ 5.213498] usb usb3: SerialNumber: 0000:00:14.0 [ 5.213779] hub 3-0:1.0: USB hub found [ 5.213911] hub 3-0:1.0: 8 ports detected [ 5.215086] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 5.215240] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.215384] usb usb4: Product: xHCI Host Controller [ 5.215499] usb usb4: Manufacturer: Linux 6.1.96 xhci-hcd [ 5.215615] usb usb4: SerialNumber: 0000:00:14.0 [ 5.215884] hub 4-0:1.0: USB hub found [ 5.216016] hub 4-0:1.0: 6 ports detected [ 5.217229] usbcore: registered new interface driver usblp [ 5.217382] usbcore: registered new interface driver usb-storage [ 5.217532] i8042: PNP: No PS/2 controller found. [ 5.217923] rtc_cmos 00:00: RTC can wake from S4 [ 5.218620] rtc_cmos 00:00: registered as rtc0 [ 5.218796] Freeing initrd memory: 19884K [ 5.218803] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 5.219126] device-mapper: uevent: version 1.0.3 [ 5.219201] xen: registering gsi 18 triggering 0 polarity 1 [ 5.219249] Already setup the GSI :18 [ 5.219386] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 5.219400] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 5.219540] intel_pstate: CPU model not supported [ 5.219572] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 5.219687] hid: raw HID events driver (C) Jiri Kosina [ 5.220153] usbcore: registered new interface driver usbhid [ 5.220212] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 5.220271] usbhid: USB HID core driver [ 5.220767] Initializing XFRM netlink socket [ 5.221019] NET: Registered PF_INET6 protocol family [ 5.221601] Segment Routing with IPv6 [ 5.221738] In-situ OAM (IOAM) with IPv6 [ 5.221881] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 5.222118] NET: Registered PF_PACKET protocol family [ 5.222271] 9pnet: Installing 9P2000 support [ 5.222395] Key type dns_resolver registered [ 5.223140] IPI shorthand broadcast: enabled [ 5.223279] sched_clock: Marking stable (5185476768, 37624303)->(6067624144, -844523073) [ 5.223861] registered taskstats version 1 [ 5.223977] Loading compiled-in X.509 certificates [ 5.226327] PM: Magic number: 12:67:895 [ 5.226559] printk: console [netcon0] enabled [ 5.226684] netconsole: network logging started [ 5.227021] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 5.238607] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 5.238967] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 5.239638] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 5.239701] ALSA device list: [ 5.247593] No soundcards found. [ 5.432777] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.448712] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.456717] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 5.494068] ata2: SATA link down (SStatus 0 SControl 300) [ 5.494377] ata5: SATA link down (SStatus 0 SControl 300) [ 5.494594] ata6: SATA link down (SStatus 0 SControl 300) [ 5.494753] ata4: SATA link down (SStatus 0 SControl 300) [ 5.494915] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.495059] ata1: SATA link down (SStatus 0 SControl 300) [ 5.496176] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 5.527194] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.527387] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 5.555239] ata3.00: configured for UDMA/133 [ 5.555720] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 5.556629] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 5.556736] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.556952] sd 2:0:0:0: [sda] Write Protect is off [ 5.557091] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.557152] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.557383] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 5.561106] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 5.561292] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.561631] hub 1-1:1.0: USB hub found [ 5.561851] hub 1-1:1.0: 4 ports detected [ 5.576241] sda: sda1 sda2 < sda5 > [ 5.576734] sd 2:0:0:0: [sda] Attached SCSI disk [ 5.577959] Freeing unused kernel image (initmem) memory: 1576K [ 5.578088] Write protecting the kernel read-only data: 22528k [ 5.578106] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 5.578358] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.578756] hub 2-1:1.0: USB hub found [ 5.578981] hub 2-1:1.0: 4 ports detected [ 5.584084] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 5.584236] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 5.584360] usb 3-3: Product: USB2.0 Hub [ 5.585138] hub 3-3:1.0: USB hub found [ 5.585590] hub 3-3:1.0: 4 ports detected [ 5.595940] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 5.597201] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 5.701674] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 5.827928] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 5.828084] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.828806] hub 3-4:1.0: USB hub found [ 5.829042] hub 3-4:1.0: 4 ports detected [ 5.891674] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 5.969050] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 5.969206] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 5.969351] usb 3-3.2: Product: USB2.0 Hub [ 5.970099] hub 3-3.2:1.0: USB hub found [ 5.970578] hub 3-3.2:1.0: 4 ports detected [ 6.055281] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 6.055411] Run /init as init process [ 6.055522] with arguments: [ 6.055523] /init [ 6.055524] placeholder [ 6.055525] with environment: [ 6.055526] HOME=/ [ 6.055527] TERM=linux [ 6.122686] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 6.227071] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 6.227233] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.233495] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 6.286969] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 6.289948] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 6.290266] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 6.499664] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 6.499836] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 6.500288] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 6.500582] xen: registering gsi 16 triggering 0 polarity 1 [ 6.500595] Already setup the GSI :16 [ 6.502203] igb: Intel(R) Gigabit Ethernet Network Driver [ 6.502329] igb: Copyright (c) 2007-2014 Intel Corporation. [ 6.502536] xen: registering gsi 16 triggering 0 polarity 1 [ 6.502548] Already setup the GSI :16 [ 6.529223] pps pps0: new PPS source ptp0 [ 6.529437] igb 0000:07:00.0: added PHC on eth0 [ 6.529571] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 6.529707] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 6.529874] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 6.529990] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 6.530221] xen: registering gsi 17 triggering 0 polarity 1 [ 6.530229] Already setup the GSI :17 [ 6.559852] pps pps1: new PPS source ptp1 [ 6.560033] igb 0000:08:00.0: added PHC on eth1 [ 6.560167] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 6.560288] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 6.560455] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 6.560570] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 6.560813] xen: registering gsi 16 triggering 0 polarity 1 [ 6.560821] Already setup the GSI :16 [ 6.617931] igb 0000:0b:00.0: added PHC on eth2 [ 6.618070] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 6.618192] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 6.618396] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 6.618512] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 6.618755] xen: registering gsi 17 triggering 0 polarity 1 [ 6.618764] Already setup the GSI :17 [ 6.676710] igb 0000:0b:00.1: added PHC on eth3 [ 6.676848] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 6.676970] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 6.677174] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 6.677290] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 6.677540] xen: registering gsi 18 triggering 0 polarity 1 [ 6.677548] Already setup the GSI :18 [ 6.735247] igb 0000:0b:00.2: added PHC on eth4 [ 6.735391] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 6.735513] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 6.735733] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 6.735850] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 6.736092] xen: registering gsi 19 triggering 0 polarity 1 [ 6.736101] Already setup the GSI :19 [ 6.793586] igb 0000:0b:00.3: added PHC on eth5 [ 6.793745] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 6.793874] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 6.794088] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 6.794204] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 6.797685] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 6.805907] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 6.815944] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 6.829152] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 6.839833] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 6.847915] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 7.238777] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 7.367553] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 7.367697] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 7.660635] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 7.660945] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 7.661162] xen: registering gsi 17 triggering 0 polarity 1 [ 7.661172] Already setup the GSI :17 [ 8.401497] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 8.531279] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 8.531440] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 8.820538] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 8.822762] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 8.832181] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 9.243435] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 9.251844] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 13.204896] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 14.175494] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 14.196405] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 14.283373] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 15.829095] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 15.829263] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 15.829457] device enx0cc47a9f87be entered promiscuous mode [ 19.357284] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 19.463027] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 19.463261] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 19.463384] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 19.463677] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready