[ 0.000000] Linux version 6.1.95+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Thu Jun 27 16:44:04 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000459] tsc: Detected 2199.998 MHz processor [ 0.000896] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000900] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000906] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000908] Disabled [ 0.000909] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000913] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000952] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027507] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.027515] ACPI: Early table checksum verification disabled [ 0.028119] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028131] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028168] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028216] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028232] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028248] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028265] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028281] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028297] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028314] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028330] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028347] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028363] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028379] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028396] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028412] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028428] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028444] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028461] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028477] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028494] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028510] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028518] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028520] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028521] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028522] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028523] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028524] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028525] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028526] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028527] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028528] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028529] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028530] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028531] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028532] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028533] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028534] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028534] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028535] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028536] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028537] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028583] Setting APIC routing to Xen PV. [ 0.032655] Zone ranges: [ 0.032656] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032658] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032660] Normal empty [ 0.032661] Movable zone start for each node [ 0.032662] Early memory node ranges [ 0.032663] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032664] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032666] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032671] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032707] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034249] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034254] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221867] Remapped 102 page(s) [ 0.223290] ACPI: PM-Timer IO Port: 0x408 [ 0.223343] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223346] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223348] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223349] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223351] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223352] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223354] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223355] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223384] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223397] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223400] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223427] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223431] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223502] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223517] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223519] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223520] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223522] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223532] Booting kernel on Xen [ 0.223533] Xen version: 4.19-unstable (preserve-AD) [ 0.223536] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229760] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.230040] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.230046] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.230050] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230128] xen: PV spinlocks enabled [ 0.230130] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230135] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230137] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230176] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230186] random: crng init done [ 0.230234] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230260] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231613] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231616] software IO TLB: area num 8. [ 0.291321] Memory: 390032K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1576K init, 1296K bss, 134000K reserved, 0K cma-reserved) [ 0.291489] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.294024] Dynamic Preempt: voluntary [ 0.294122] rcu: Preemptible hierarchical RCU implementation. [ 0.294123] rcu: RCU event tracing is enabled. [ 0.294124] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.294125] Trampoline variant of Tasks RCU enabled. [ 0.294126] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.294127] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.304618] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.304741] xen:events: Using FIFO-based ABI [ 0.304772] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.304781] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.304788] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.304796] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.304804] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.304811] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.304818] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.304826] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.304833] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.304841] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.304849] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.304856] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.304864] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.304872] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.304880] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.304891] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.310247] Console: colour VGA+ 80x25 [ 0.325103] printk: console [tty0] enabled [ 0.326446] printk: console [hvc0] enabled [ 0.326584] ACPI: Core revision 20220331 [ 0.342082] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.342250] Xen: using vcpuop timer interface [ 0.342257] installing Xen timer for CPU 0 [ 0.342407] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.342567] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199998) [ 0.342897] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.343015] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.343142] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.343292] Spectre V2 : Mitigation: Retpolines [ 0.343573] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.343720] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.343840] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.343962] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.344111] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.344229] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.344382] MDS: Mitigation: Clear CPU buffers [ 0.344495] TAA: Mitigation: Clear CPU buffers [ 0.344570] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.344736] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.344888] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.345019] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.345139] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.345259] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.362977] Freeing SMP alternatives memory: 40K [ 0.363104] pid_max: default: 32768 minimum: 301 [ 0.363587] LSM: Security Framework initializing [ 0.363711] SELinux: Initializing. [ 0.363855] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364003] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364659] cpu 0 spinlock event irq 25 [ 0.364780] VPMU disabled by hypervisor. [ 0.365214] cblist_init_generic: Setting adjustable number of callback queues. [ 0.365360] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.365516] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.365572] signal: max sigframe size: 1776 [ 0.365735] rcu: Hierarchical SRCU implementation. [ 0.365856] rcu: Max phase no-delay instances is 400. [ 0.366352] smp: Bringing up secondary CPUs ... [ 0.366686] installing Xen timer for CPU 1 [ 0.367158] cpu 1 spinlock event irq 35 [ 0.367710] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.367880] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.368070] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.368827] installing Xen timer for CPU 2 [ 0.369272] cpu 2 spinlock event irq 41 [ 0.369642] installing Xen timer for CPU 3 [ 0.370075] cpu 3 spinlock event irq 47 [ 0.370075] installing Xen timer for CPU 4 [ 0.370912] cpu 4 spinlock event irq 53 [ 0.370912] installing Xen timer for CPU 5 [ 0.371756] cpu 5 spinlock event irq 59 [ 0.371774] installing Xen timer for CPU 6 [ 0.372634] cpu 6 spinlock event irq 65 [ 0.372830] installing Xen timer for CPU 7 [ 0.373261] cpu 7 spinlock event irq 71 [ 0.373830] smp: Brought up 1 node, 8 CPUs [ 0.373951] smpboot: Max logical packages: 1 [ 0.374169] devtmpfs: initialized [ 0.374610] x86/mm: Memory block size: 128MB [ 0.374962] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.374962] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.375000] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.375701] PM: RTC time: 18:44:12, date: 2024-06-27 [ 0.375946] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.376093] xen:grant_table: Grant tables using version 1 layout [ 0.376236] Grant table initialized [ 0.376549] audit: initializing netlink subsys (disabled) [ 0.376703] audit: type=2000 audit(1719513852.302:1): state=initialized audit_enabled=0 res=1 [ 0.376703] thermal_sys: Registered thermal governor 'step_wise' [ 0.376703] thermal_sys: Registered thermal governor 'user_space' [ 0.376767] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.377623] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.377779] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.507336] PCI: Using configuration type 1 for base access [ 0.509979] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.510635] ACPI: Added _OSI(Module Device) [ 0.510736] ACPI: Added _OSI(Processor Device) [ 0.510850] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.510964] ACPI: Added _OSI(Processor Aggregator Device) [ 0.541340] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.543326] xen: registering gsi 9 triggering 0 polarity 0 [ 0.546075] ACPI: Dynamic OEM Table Load: [ 0.553776] ACPI: Interpreter enabled [ 0.553930] ACPI: PM: (supports S0 S4 S5) [ 0.554042] ACPI: Using IOAPIC for interrupt routing [ 0.554188] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.554339] PCI: Using E820 reservations for host bridge windows [ 0.554915] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.588663] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.588794] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.589031] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.589294] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.589423] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.589600] PCI host bridge to bus 0000:ff [ 0.589714] pci_bus 0000:ff: root bus resource [bus ff] [ 0.589910] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.590370] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.591001] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.591435] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.591893] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.592331] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.592766] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.593197] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.593660] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.594108] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.594538] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.594885] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.595529] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.595883] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.596358] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.596786] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.597217] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.597660] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.597919] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.598608] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.599126] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.599798] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.600275] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.600753] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.601230] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.601702] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.602135] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.602579] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.603057] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.603741] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.604218] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.604691] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.605124] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.605584] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.606017] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.606663] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.607347] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.607829] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.608343] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.608873] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.609305] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.609742] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.610179] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.610431] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.610882] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.611507] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.611887] pci_bus 0000:ff: on NUMA node 0 [ 0.616545] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.617573] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.617852] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.618193] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.618314] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.618802] PCI host bridge to bus 0000:00 [ 0.618917] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.619038] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.619160] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.619305] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.619451] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.619634] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.620478] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.620984] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.621358] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.621894] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.622289] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.623022] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.623386] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.624115] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.624507] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.624987] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.625361] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.625893] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.626271] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.626861] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.627505] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.628334] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.628559] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.629031] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.629381] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.629601] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.630104] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.630412] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.630841] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.631320] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.631898] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.632099] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.632651] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.632976] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.633536] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.633652] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.633798] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.641747] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.642316] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.642515] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.643578] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.644086] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.644657] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.644855] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.644978] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.645275] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.645893] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.646101] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.646223] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.646564] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.646787] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.647339] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.647689] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.648468] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.648647] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.648820] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.648981] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.649139] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.649298] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.649457] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.649779] pci 0000:00:1f.2: PME# supported from D3hot [ 0.650080] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.650301] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.650550] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.650866] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.651088] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.651827] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.652127] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.652472] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.652665] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.653436] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.653660] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.654383] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.654599] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.655327] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.655543] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.656162] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.656315] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.656668] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.656884] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.657173] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.657359] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.657718] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.657943] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.658065] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.658271] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.658392] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.658990] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.659206] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.659496] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.659612] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.659969] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.660176] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.660303] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.660509] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.660569] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.661143] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.661278] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.661417] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.661720] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.662018] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.662387] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.662507] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.662659] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.662882] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.663049] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.663049] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.663062] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.663188] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.663323] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.663564] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.663564] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.663564] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.663564] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.663564] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.664944] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.665416] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.665542] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.665580] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.665928] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.666328] pci 0000:09:00.0: enabling Extended Tags [ 0.666675] pci 0000:09:00.0: supports D1 D2 [ 0.666789] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.667150] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.667282] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.667419] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.667731] pci_bus 0000:0a: extended config space not accessible [ 0.667904] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.668112] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.668281] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.668449] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.668815] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.669109] pci 0000:0a:00.0: supports D1 D2 [ 0.669223] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.669668] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.669808] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.669939] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.670341] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.670544] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.670661] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.670824] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.671372] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.671611] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.671758] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.671978] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.672124] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.672658] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.672863] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.673075] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.673238] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.673760] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.673992] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.674143] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.674363] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.674508] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.674940] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.675143] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.675358] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.675521] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.675970] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.676202] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.676347] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.676569] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.676746] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.677269] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.677473] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.677661] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.677825] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.678349] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.678584] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.678729] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.678949] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.679094] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.679712] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.679839] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.679969] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.680110] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.680588] pci_bus 0000:00: on NUMA node 0 [ 0.680685] xen: registering gsi 13 triggering 1 polarity 0 [ 0.681656] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.681852] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.682042] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.682238] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.682428] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.682546] ACPI: PCI: Interrupt link LNKE disabled [ 0.682642] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.682761] ACPI: PCI: Interrupt link LNKF disabled [ 0.682946] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.683065] ACPI: PCI: Interrupt link LNKG disabled [ 0.683249] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.683374] ACPI: PCI: Interrupt link LNKH disabled [ 0.683668] xen:balloon: Initialising balloon driver [ 0.684670] iommu: Default domain type: Translated [ 0.691574] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.691760] SCSI subsystem initialized [ 0.692594] libata version 3.00 loaded. [ 0.692607] ACPI: bus type USB registered [ 0.692735] usbcore: registered new interface driver usbfs [ 0.692858] usbcore: registered new interface driver hub [ 0.692979] usbcore: registered new device driver usb [ 0.693106] pps_core: LinuxPPS API ver. 1 registered [ 0.693106] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.693106] PTP clock support registered [ 0.693613] Advanced Linux Sound Architecture Driver Initialized. [ 0.693864] NetLabel: Initializing [ 0.693976] NetLabel: domain hash size = 128 [ 0.694088] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.694088] NetLabel: unlabeled traffic allowed by default [ 0.694606] PCI: Using ACPI for IRQ routing [ 0.730337] PCI: pci_cache_line_size set to 64 bytes [ 0.731142] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.731145] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.731607] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.731729] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.731847] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.731847] vgaarb: loaded [ 0.733568] clocksource: Switched to clocksource tsc-early [ 0.733815] VFS: Disk quotas dquot_6.6.0 [ 0.733943] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.734089] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.734246] pnp: PnP ACPI init [ 0.734727] xen: registering gsi 8 triggering 1 polarity 0 [ 0.734858] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.734983] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.735102] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.735221] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.735340] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.735459] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.735590] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.735726] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.735850] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.735977] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.736100] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.736220] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.736341] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.736778] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.736904] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.737023] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.737141] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.737260] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.737713] xen: registering gsi 4 triggering 1 polarity 0 [ 0.737719] Already setup the GSI :4 [ 0.737833] pnp 00:03: [dma 0 disabled] [ 0.738145] xen: registering gsi 3 triggering 1 polarity 0 [ 0.738157] pnp 00:04: [dma 0 disabled] [ 0.738765] pnp: PnP ACPI: found 5 devices [ 0.770057] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.770255] NET: Registered PF_INET protocol family [ 0.770417] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.770821] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.770976] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.771123] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.771274] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.771445] TCP: Hash tables configured (established 4096 bind 4096) [ 0.771637] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.771814] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.771969] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.772387] RPC: Registered named UNIX socket transport module. [ 0.772514] RPC: Registered udp transport module. [ 0.772652] RPC: Registered tcp transport module. [ 0.772768] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.773318] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.773494] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.773683] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.773849] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.773997] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.774174] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.774349] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.774485] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.774677] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.774811] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.774956] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.775101] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.775247] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.775370] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.775515] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.775682] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.775832] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.775955] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.776100] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.776251] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.776396] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.776519] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.776684] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.776831] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.776977] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.777112] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.777247] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.777419] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.777609] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.777801] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.777924] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.778064] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.778226] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.778346] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.778486] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.778681] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.778805] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.778948] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.779139] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.779259] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.779399] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.779576] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.779746] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.779903] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.780057] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.780211] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.780372] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.780526] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.780706] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.780863] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.780984] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.781124] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.781259] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.781433] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.781594] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.781736] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.781858] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.781979] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.782101] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.782220] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.782340] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.782485] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.782619] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.782754] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.782871] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.782991] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.783115] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.783255] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.783371] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.783491] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.783625] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.783760] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.784313] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.784534] xen: registering gsi 19 triggering 0 polarity 1 [ 0.784562] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.793348] xen: registering gsi 18 triggering 0 polarity 1 [ 0.793369] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.809776] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 16095 usecs [ 0.810023] xen: registering gsi 18 triggering 0 polarity 1 [ 0.810029] Already setup the GSI :18 [ 0.826994] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 16627 usecs [ 0.827211] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.827353] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.827426] Unpacking initramfs... [ 0.827475] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.827877] kvm: no hardware support for 'kvm_intel' [ 0.835796] has_svm: not amd or hygon [ 0.835950] kvm: no hardware support for 'kvm_amd' [ 0.836067] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.836513] clocksource: Switched to clocksource tsc [ 0.839374] Initialise system trusted keyrings [ 0.839703] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.841167] NFS: Registering the id_resolver key type [ 0.841293] Key type id_resolver registered [ 0.841405] Key type id_legacy registered [ 0.841656] 9p: Installing v9fs 9p2000 file system support [ 0.855687] Key type asymmetric registered [ 0.855813] Asymmetric key parser 'x509' registered [ 0.855949] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.856105] io scheduler mq-deadline registered [ 0.856220] io scheduler kyber registered [ 0.857056] xen: registering gsi 16 triggering 0 polarity 1 [ 0.857087] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.857632] xen: registering gsi 16 triggering 0 polarity 1 [ 0.857638] Already setup the GSI :16 [ 0.858309] xen: registering gsi 16 triggering 0 polarity 1 [ 0.858315] Already setup the GSI :16 [ 0.858645] xen: registering gsi 16 triggering 0 polarity 1 [ 0.858649] Already setup the GSI :16 [ 0.858995] xen: registering gsi 16 triggering 0 polarity 1 [ 0.859000] Already setup the GSI :16 [ 0.859618] xen: registering gsi 16 triggering 0 polarity 1 [ 0.859623] Already setup the GSI :16 [ 0.860242] xen: registering gsi 16 triggering 0 polarity 1 [ 0.860247] Already setup the GSI :16 [ 0.860707] xen: registering gsi 17 triggering 0 polarity 1 [ 0.860724] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.861069] xen: registering gsi 19 triggering 0 polarity 1 [ 0.861074] Already setup the GSI :19 [ 0.861518] xen: registering gsi 16 triggering 0 polarity 1 [ 0.861522] Already setup the GSI :16 [ 0.862210] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.862394] ACPI: button: Power Button [PWRB] [ 0.862539] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.862754] ACPI: button: Power Button [PWRF] [ 0.863005] Monitor-Mwait will be used to enter C-1 state [ 0.863018] Monitor-Mwait will be used to enter C-2 state [ 0.863024] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.863411] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.863808] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.864157] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.864517] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.870880] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.871339] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.878919] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.879919] xen:xen_evtchn: Event-channel device installed [ 0.880113] xen_pciback: backend is vpci [ 0.880923] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.881240] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.881992] hpet_acpi_add: no address or irqs in _CRS [ 0.882208] Non-volatile memory driver v1.3 [ 0.882322] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.885156] loop: module loaded [ 0.891696] ahci 0000:00:1f.2: version 3.0 [ 0.891807] xen: registering gsi 16 triggering 0 polarity 1 [ 0.891818] Already setup the GSI :16 [ 0.892152] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.892304] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.907356] scsi host0: ahci [ 0.907750] scsi host1: ahci [ 0.908118] scsi host2: ahci [ 0.908478] scsi host3: ahci [ 0.908827] scsi host4: ahci [ 0.909122] scsi host5: ahci [ 0.909268] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 0.909423] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 0.909571] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 0.909733] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 0.909879] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 0.910024] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 0.910511] tun: Universal TUN/TAP device driver, 1.6 [ 0.910777] e100: Intel(R) PRO/100 Network Driver [ 0.910913] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.911058] sky2: driver version 1.30 [ 0.911245] xen_netfront: Initialising Xen virtual ethernet driver [ 0.911621] xen: registering gsi 18 triggering 0 polarity 1 [ 0.911631] Already setup the GSI :18 [ 0.911868] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.912099] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.912282] ehci-pci 0000:00:1a.0: debug port 2 [ 0.916421] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.922748] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.922979] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.923129] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.923281] usb usb1: Product: EHCI Host Controller [ 0.923396] usb usb1: Manufacturer: Linux 6.1.95+ ehci_hcd [ 0.923513] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.923864] hub 1-0:1.0: USB hub found [ 0.923996] hub 1-0:1.0: 2 ports detected [ 0.924362] xen: registering gsi 18 triggering 0 polarity 1 [ 0.924371] Already setup the GSI :18 [ 0.924566] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.924802] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.924980] ehci-pci 0000:00:1d.0: debug port 2 [ 0.929076] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.933384] Freeing initrd memory: 19884K [ 0.935846] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.936150] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.936300] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.936444] usb usb2: Product: EHCI Host Controller [ 0.936560] usb usb2: Manufacturer: Linux 6.1.95+ ehci_hcd [ 0.936691] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.936959] hub 2-0:1.0: USB hub found [ 0.937085] hub 2-0:1.0: 2 ports detected [ 0.937553] xen: registering gsi 19 triggering 0 polarity 1 [ 0.937563] Already setup the GSI :19 [ 0.937787] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.937968] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.939183] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.939657] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.939848] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.940036] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.940240] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.940388] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.940533] usb usb3: Product: xHCI Host Controller [ 0.940648] usb usb3: Manufacturer: Linux 6.1.95+ xhci-hcd [ 0.940777] usb usb3: SerialNumber: 0000:00:14.0 [ 0.941053] hub 3-0:1.0: USB hub found [ 0.941186] hub 3-0:1.0: 8 ports detected [ 0.942368] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.942520] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.942709] usb usb4: Product: xHCI Host Controller [ 0.942825] usb usb4: Manufacturer: Linux 6.1.95+ xhci-hcd [ 0.942941] usb usb4: SerialNumber: 0000:00:14.0 [ 0.943200] hub 4-0:1.0: USB hub found [ 0.943333] hub 4-0:1.0: 6 ports detected [ 0.944421] usbcore: registered new interface driver usblp [ 0.944557] usbcore: registered new interface driver usb-storage [ 0.944715] i8042: PNP: No PS/2 controller found. [ 0.944985] rtc_cmos 00:00: RTC can wake from S4 [ 0.945636] rtc_cmos 00:00: registered as rtc0 [ 0.945859] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.946050] device-mapper: uevent: version 1.0.3 [ 0.946150] xen: registering gsi 18 triggering 0 polarity 1 [ 0.946171] Already setup the GSI :18 [ 0.946265] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.946317] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.946438] intel_pstate: CPU model not supported [ 0.946469] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.946571] hid: raw HID events driver (C) Jiri Kosina [ 0.947078] usbcore: registered new interface driver usbhid [ 0.947098] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.947195] usbhid: USB HID core driver [ 0.947615] Initializing XFRM netlink socket [ 0.947941] NET: Registered PF_INET6 protocol family [ 0.948650] Segment Routing with IPv6 [ 0.948789] In-situ OAM (IOAM) with IPv6 [ 0.948934] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.949177] NET: Registered PF_PACKET protocol family [ 0.949333] 9pnet: Installing 9P2000 support [ 0.949461] Key type dns_resolver registered [ 0.950167] IPI shorthand broadcast: enabled [ 0.950307] sched_clock: Marking stable (912453784, 37671113)->(1794758987, -844634090) [ 0.950911] registered taskstats version 1 [ 0.951036] Loading compiled-in X.509 certificates [ 0.953494] PM: Magic number: 12:623:747 [ 0.953716] acpi LNXCPU:72: hash matches [ 0.953860] printk: console [netcon0] enabled [ 0.953975] netconsole: network logging started [ 0.954312] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.966157] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.966508] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.967027] ALSA device list: [ 0.967154] No soundcards found. [ 0.967187] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 1.160813] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.176747] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.184855] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.221814] ata6: SATA link down (SStatus 0 SControl 300) [ 1.221955] ata4: SATA link down (SStatus 0 SControl 300) [ 1.222095] ata2: SATA link down (SStatus 0 SControl 300) [ 1.222252] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.222397] ata5: SATA link down (SStatus 0 SControl 300) [ 1.222554] ata1: SATA link down (SStatus 0 SControl 300) [ 1.223674] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.256177] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.256308] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.284203] ata3.00: configured for UDMA/133 [ 1.284635] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.285533] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.285639] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.285852] sd 2:0:0:0: [sda] Write Protect is off [ 1.285976] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.286037] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.286268] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.289363] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.289519] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.289923] hub 1-1:1.0: USB hub found [ 1.290105] hub 1-1:1.0: 4 ports detected [ 1.305136] sda: sda1 sda2 < sda5 > [ 1.305654] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.306230] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.306384] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.306758] hub 2-1:1.0: USB hub found [ 1.306980] hub 2-1:1.0: 4 ports detected [ 1.307074] Freeing unused kernel image (initmem) memory: 1576K [ 1.307237] Write protecting the kernel read-only data: 22528k [ 1.312172] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.312329] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.312453] usb 3-3: Product: USB2.0 Hub [ 1.313240] hub 3-3:1.0: USB hub found [ 1.313709] hub 3-3:1.0: 4 ports detected [ 1.325604] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.326904] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.429756] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.557982] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.558135] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.558759] hub 3-4:1.0: USB hub found [ 1.558971] hub 3-4:1.0: 4 ports detected [ 1.622715] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.702153] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.702310] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.702456] usb 3-3.2: Product: USB2.0 Hub [ 1.703138] hub 3-3.2:1.0: USB hub found [ 1.703616] hub 3-3.2:1.0: 4 ports detected [ 1.788383] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.788511] Run /init as init process [ 1.788655] with arguments: [ 1.788656] /init [ 1.788657] placeholder [ 1.788658] with environment: [ 1.788659] HOME=/ [ 1.788660] TERM=linux [ 1.850725] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.956195] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.956365] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.962162] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 2.014155] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 2.017024] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 2.017406] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.229636] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.229832] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.230288] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.230553] xen: registering gsi 16 triggering 0 polarity 1 [ 2.230564] Already setup the GSI :16 [ 2.234446] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.234572] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.234800] xen: registering gsi 16 triggering 0 polarity 1 [ 2.234810] Already setup the GSI :16 [ 2.261827] pps pps0: new PPS source ptp0 [ 2.262009] igb 0000:07:00.0: added PHC on eth0 [ 2.262143] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.262265] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.262431] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.262547] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.262803] xen: registering gsi 17 triggering 0 polarity 1 [ 2.262813] Already setup the GSI :17 [ 2.292327] pps pps1: new PPS source ptp1 [ 2.292509] igb 0000:08:00.0: added PHC on eth1 [ 2.292643] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.292781] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.292948] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.293064] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.293296] xen: registering gsi 16 triggering 0 polarity 1 [ 2.293304] Already setup the GSI :16 [ 2.350824] igb 0000:0b:00.0: added PHC on eth2 [ 2.350965] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.351087] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.351291] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.351407] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.351643] xen: registering gsi 17 triggering 0 polarity 1 [ 2.351653] Already setup the GSI :17 [ 2.409812] igb 0000:0b:00.1: added PHC on eth3 [ 2.409955] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.410080] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.410288] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.410405] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.410636] xen: registering gsi 18 triggering 0 polarity 1 [ 2.410644] Already setup the GSI :18 [ 2.468248] igb 0000:0b:00.2: added PHC on eth4 [ 2.468391] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.468513] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.468733] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.468850] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.469091] xen: registering gsi 19 triggering 0 polarity 1 [ 2.469101] Already setup the GSI :19 [ 2.526666] igb 0000:0b:00.3: added PHC on eth5 [ 2.526821] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.526944] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.527148] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.527264] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.529734] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.539367] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.544922] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.562079] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.574028] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.582350] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 2.973925] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.103564] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.103714] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.396763] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.397105] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.397326] xen: registering gsi 17 triggering 0 polarity 1 [ 3.397338] Already setup the GSI :17 [ 4.140198] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.269906] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.270129] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.564538] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.566940] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 4.579250] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.982312] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 4.990600] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.559860] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.558786] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.575290] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.653972] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.240496] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.240664] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.240876] device enx0cc47a9f87be entered promiscuous mode [ 14.786277] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 14.895037] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 14.895344] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 14.895469] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 14.895764] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready