[ 0.000000] Linux version 6.10.0-rc5+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Thu Jun 27 22:42:25 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina1--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] DMI: Memory slots populated: 1/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000029] Xen PV: Detected 8 vCPUS [ 0.000486] tsc: Detected 2199.998 MHz processor [ 0.000918] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000922] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000929] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000932] MTRR map: 2 entries (0 fixed + 2 variable; max 20), built from 10 variable MTRRs [ 0.000933] MTRRs set to read-only [ 0.000937] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000979] Kernel/User page tables isolation: disabled on XEN PV. [ 0.026660] RAMDISK: [mem 0x04000000-0x053a5fff] [ 0.026669] ACPI: Early table checksum verification disabled [ 0.027270] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.027283] ACPI: XSDT 0x00000000799FF0A0 0000BC (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027320] ACPI: FACP 0x0000000079A17AC8 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027368] ACPI: DSDT 0x00000000799FF1F0 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.027384] ACPI: FACS 0x0000000079E59F80 000040 [ 0.027400] ACPI: APIC 0x0000000079A17BD8 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027416] ACPI: FPDT 0x0000000079A17C98 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027432] ACPI: FIDT 0x0000000079A17CE0 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027448] ACPI: SPMI 0x0000000079A17D80 000040 (v05 SUPERM SMCI--MB 00000000 AMI. 00000000) [ 0.027464] ACPI: MCFG 0x0000000079A17DC0 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.027480] ACPI: UEFI 0x0000000079A17E00 000042 (v01 00000000 00000000) [ 0.027496] ACPI: DBG2 0x0000000079A17E48 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.027512] ACPI: HPET 0x0000000079A17EC0 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.027528] ACPI: WDDT 0x0000000079A17EF8 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.027544] ACPI: SSDT 0x0000000079A17F38 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.027561] ACPI: SSDT 0x0000000079A26CC8 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.027577] ACPI: SSDT 0x0000000079A28F50 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.027593] ACPI: PRAD 0x0000000079A28FB8 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.027609] ACPI: RMAD 0x0000000079A290C0 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.027625] ACPI: HEST 0x0000000079A29190 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027641] ACPI: BERT 0x0000000079A29238 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027657] ACPI: ERST 0x0000000079A29268 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027673] ACPI: EINJ 0x0000000079A29498 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027681] ACPI: Reserving FACP table memory at [mem 0x79a17ac8-0x79a17bd3] [ 0.027683] ACPI: Reserving DSDT table memory at [mem 0x799ff1f0-0x79a17ac4] [ 0.027684] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.027685] ACPI: Reserving APIC table memory at [mem 0x79a17bd8-0x79a17c93] [ 0.027686] ACPI: Reserving FPDT table memory at [mem 0x79a17c98-0x79a17cdb] [ 0.027687] ACPI: Reserving FIDT table memory at [mem 0x79a17ce0-0x79a17d7b] [ 0.027688] ACPI: Reserving SPMI table memory at [mem 0x79a17d80-0x79a17dbf] [ 0.027689] ACPI: Reserving MCFG table memory at [mem 0x79a17dc0-0x79a17dfb] [ 0.027690] ACPI: Reserving UEFI table memory at [mem 0x79a17e00-0x79a17e41] [ 0.027691] ACPI: Reserving DBG2 table memory at [mem 0x79a17e48-0x79a17eb9] [ 0.027691] ACPI: Reserving HPET table memory at [mem 0x79a17ec0-0x79a17ef7] [ 0.027692] ACPI: Reserving WDDT table memory at [mem 0x79a17ef8-0x79a17f37] [ 0.027693] ACPI: Reserving SSDT table memory at [mem 0x79a17f38-0x79a26cc2] [ 0.027694] ACPI: Reserving SSDT table memory at [mem 0x79a26cc8-0x79a28f4c] [ 0.027695] ACPI: Reserving SSDT table memory at [mem 0x79a28f50-0x79a28fb3] [ 0.027696] ACPI: Reserving PRAD table memory at [mem 0x79a28fb8-0x79a290b9] [ 0.027697] ACPI: Reserving RMAD table memory at [mem 0x79a290c0-0x79a2918b] [ 0.027698] ACPI: Reserving HEST table memory at [mem 0x79a29190-0x79a29237] [ 0.027699] ACPI: Reserving BERT table memory at [mem 0x79a29238-0x79a29267] [ 0.027700] ACPI: Reserving ERST table memory at [mem 0x79a29268-0x79a29497] [ 0.027701] ACPI: Reserving EINJ table memory at [mem 0x79a29498-0x79a295c7] [ 0.027808] APIC: Switched APIC routing to: Xen PV [ 0.031893] Zone ranges: [ 0.031894] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.031897] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.031899] Normal empty [ 0.031900] Movable zone start for each node [ 0.031901] Early memory node ranges [ 0.031902] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.031904] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.031905] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.031911] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.031950] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.033435] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.033440] p2m virtual area at (____ptrval____), size is 40000000 [ 0.160012] Remapped 102 page(s) [ 0.161391] ACPI: PM-Timer IO Port: 0x408 [ 0.161460] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.161463] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.161465] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.161467] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.161469] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.161470] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.161472] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.161473] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.161502] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.161516] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.161520] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.161547] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.161552] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.161564] CPU topo: Max. logical packages: 1 [ 0.161565] CPU topo: Max. logical dies: 1 [ 0.161566] CPU topo: Max. dies per package: 1 [ 0.161573] CPU topo: Max. threads per core: 2 [ 0.161574] CPU topo: Num. cores per package: 4 [ 0.161574] CPU topo: Num. threads per package: 8 [ 0.161575] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs [ 0.161589] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.161591] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.161592] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.161594] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.161599] Booting kernel on Xen [ 0.161600] Xen version: 4.19-unstable (preserve-AD) [ 0.161603] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.168645] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.169118] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u262144 [ 0.169123] pcpu-alloc: s194408 r8192 d30872 u262144 alloc=1*2097152 [ 0.169127] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.169198] xen: PV spinlocks enabled [ 0.169201] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.169204] Kernel command line: placeholder root=/dev/mapper/debina1--vg-root ro console=hvc0 [ 0.169242] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.169253] random: crng init done [ 0.169328] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.169369] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.170687] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.170691] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.170693] software IO TLB: area num 8. [ 0.234013] Memory: 385604K/524284K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 138428K reserved, 0K cma-reserved) [ 0.234175] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.236772] Dynamic Preempt: voluntary [ 0.237021] rcu: Preemptible hierarchical RCU implementation. [ 0.237022] rcu: RCU event tracing is enabled. [ 0.237023] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.237024] Trampoline variant of Tasks RCU enabled. [ 0.237025] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.237026] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.237061] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.248873] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.249030] xen:events: Using FIFO-based ABI [ 0.249054] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.249063] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.249071] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.249079] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.249086] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.249094] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.249101] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.249108] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.249116] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.249124] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.249131] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.249139] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.249147] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.249156] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.249163] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.249173] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.254533] Console: colour VGA+ 80x25 [ 0.254537] printk: legacy console [tty0] enabled [ 0.273863] printk: legacy console [hvc0] enabled [ 0.275372] ACPI: Core revision 20240322 [ 0.289432] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.289591] Xen: using vcpuop timer interface [ 0.289599] installing Xen timer for CPU 0 [ 0.289757] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.289916] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199998) [ 0.290245] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.290362] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.290489] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.290638] Spectre V2 : Mitigation: Retpolines [ 0.290923] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.291068] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.291187] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.291308] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.291455] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.291572] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.291924] MDS: Mitigation: Clear CPU buffers [ 0.292037] TAA: Mitigation: Clear CPU buffers [ 0.292150] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.292314] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.292458] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.292576] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.292700] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.292833] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.315655] Freeing SMP alternatives memory: 40K [ 0.315785] pid_max: default: 32768 minimum: 301 [ 0.315926] LSM: initializing lsm=capability,selinux [ 0.316048] SELinux: Initializing. [ 0.316211] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.316357] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.317003] cpu 0 spinlock event irq 25 [ 0.317120] VPMU disabled by hypervisor. [ 0.317695] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.317848] signal: max sigframe size: 1776 [ 0.317991] rcu: Hierarchical SRCU implementation. [ 0.318106] rcu: Max phase no-delay instances is 400. [ 0.318721] smp: Bringing up secondary CPUs ... [ 0.319079] installing Xen timer for CPU 1 [ 0.319537] installing Xen timer for CPU 2 [ 0.319986] installing Xen timer for CPU 3 [ 0.041738] [Firmware Bug]: CPU 1: APIC ID mismatch. Firmware: 0x0002 APIC: 0x0001 [ 0.320209] cpu 1 spinlock event irq 45 [ 0.321059] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.321229] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.321416] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.041738] [Firmware Bug]: CPU 2: APIC ID mismatch. Firmware: 0x0004 APIC: 0x0002 [ 0.321963] cpu 2 spinlock event irq 46 [ 0.041738] [Firmware Bug]: CPU 3: APIC ID mismatch. Firmware: 0x0006 APIC: 0x0003 [ 0.322226] cpu 3 spinlock event irq 47 [ 0.323148] installing Xen timer for CPU 4 [ 0.323622] installing Xen timer for CPU 5 [ 0.324159] installing Xen timer for CPU 6 [ 0.324577] installing Xen timer for CPU 7 [ 0.041738] [Firmware Bug]: CPU 4: APIC ID mismatch. Firmware: 0x0001 APIC: 0x0004 [ 0.324959] cpu 4 spinlock event irq 68 [ 0.041738] [Firmware Bug]: CPU 5: APIC ID mismatch. Firmware: 0x0003 APIC: 0x0005 [ 0.325219] cpu 5 spinlock event irq 69 [ 0.041738] [Firmware Bug]: CPU 6: APIC ID mismatch. Firmware: 0x0005 APIC: 0x0006 [ 0.325961] cpu 6 spinlock event irq 70 [ 0.326222] cpu 7 spinlock event irq 71 [ 0.327110] smp: Brought up 1 node, 8 CPUs [ 0.327353] devtmpfs: initialized [ 0.327353] x86/mm: Memory block size: 128MB [ 0.328236] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.328236] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.328333] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.328922] PM: RTC time: 23:50:33, date: 2024-06-27 [ 0.329162] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.329307] xen:grant_table: Grant tables using version 1 layout [ 0.329443] Grant table initialized [ 0.329797] audit: initializing netlink subsys (disabled) [ 0.329950] audit: type=2000 audit(1719532234.223:1): state=initialized audit_enabled=0 res=1 [ 0.329992] thermal_sys: Registered thermal governor 'step_wise' [ 0.329992] thermal_sys: Registered thermal governor 'user_space' [ 0.330120] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.330568] PCI: ECAM [mem 0x80000000-0x8fffffff] (base 0x80000000) for domain 0000 [bus 00-ff] [ 0.463842] PCI: Using configuration type 1 for base access [ 0.463981] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.464128] ACPI: Added _OSI(Module Device) [ 0.464128] ACPI: Added _OSI(Processor Device) [ 0.464923] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.465037] ACPI: Added _OSI(Processor Aggregator Device) [ 0.494302] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.496396] xen: registering gsi 9 triggering 0 polarity 0 [ 0.500403] ACPI: Dynamic OEM Table Load: [ 0.503740] ACPI: _OSC evaluated successfully for all CPUs [ 0.504075] ACPI: Interpreter enabled [ 0.504210] ACPI: PM: (supports S0 S4 S5) [ 0.504321] ACPI: Using IOAPIC for interrupt routing [ 0.504467] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.504617] PCI: Using E820 reservations for host bridge windows [ 0.505441] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.532970] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.533099] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.533335] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.533592] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.533713] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.533888] PCI host bridge to bus 0000:ff [ 0.533920] pci_bus 0000:ff: root bus resource [bus ff] [ 0.534119] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 conventional PCI endpoint [ 0.534602] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 conventional PCI endpoint [ 0.535064] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 conventional PCI endpoint [ 0.535520] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 conventional PCI endpoint [ 0.535994] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 conventional PCI endpoint [ 0.536450] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 conventional PCI endpoint [ 0.537129] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 conventional PCI endpoint [ 0.537584] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 conventional PCI endpoint [ 0.538067] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 conventional PCI endpoint [ 0.538540] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 conventional PCI endpoint [ 0.538999] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 conventional PCI endpoint [ 0.539454] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 conventional PCI endpoint [ 0.540148] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 conventional PCI endpoint [ 0.540825] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 conventional PCI endpoint [ 0.541242] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 conventional PCI endpoint [ 0.541696] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 conventional PCI endpoint [ 0.542150] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 conventional PCI endpoint [ 0.542610] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 conventional PCI endpoint [ 0.542896] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 conventional PCI endpoint [ 0.543266] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 conventional PCI endpoint [ 0.543771] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 conventional PCI endpoint [ 0.544272] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 conventional PCI endpoint [ 0.545012] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 conventional PCI endpoint [ 0.545513] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 conventional PCI endpoint [ 0.546015] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 conventional PCI endpoint [ 0.546509] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 conventional PCI endpoint [ 0.546973] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 conventional PCI endpoint [ 0.547642] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 conventional PCI endpoint [ 0.548150] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 conventional PCI endpoint [ 0.548854] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 conventional PCI endpoint [ 0.549273] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 conventional PCI endpoint [ 0.549769] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 conventional PCI endpoint [ 0.550229] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 conventional PCI endpoint [ 0.550691] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 conventional PCI endpoint [ 0.551152] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 conventional PCI endpoint [ 0.551617] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 conventional PCI endpoint [ 0.552289] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 conventional PCI endpoint [ 0.552994] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 conventional PCI endpoint [ 0.553502] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 conventional PCI endpoint [ 0.554074] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 conventional PCI endpoint [ 0.554547] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 conventional PCI endpoint [ 0.555021] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 conventional PCI endpoint [ 0.555486] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 conventional PCI endpoint [ 0.555770] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 conventional PCI endpoint [ 0.556250] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 conventional PCI endpoint [ 0.556714] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 conventional PCI endpoint [ 0.557199] pci_bus 0000:ff: on NUMA node 0 [ 0.561570] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.561701] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.561981] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.562328] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.562456] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.562940] PCI host bridge to bus 0000:00 [ 0.563054] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.563176] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.563303] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.563453] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.563597] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.563782] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 PCIe Root Port [ 0.564469] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 PCIe Root Port [ 0.564769] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.565188] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.565569] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 PCIe Root Port [ 0.565868] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.566218] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.566620] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 PCIe Root Port [ 0.566919] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.567057] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.567449] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.567816] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 PCIe Root Port [ 0.568072] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.568210] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.568374] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.568746] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.569136] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 PCIe Root Port [ 0.569443] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.569859] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.570179] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 PCIe Root Port [ 0.570478] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.570891] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.571180] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint [ 0.571813] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint [ 0.572433] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint [ 0.573135] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 conventional PCI endpoint [ 0.573381] pci 0000:00:14.0: BAR 0 [mem 0xfb600000-0xfb60ffff 64bit] [ 0.573843] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.574151] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 conventional PCI endpoint [ 0.574402] pci 0000:00:16.0: BAR 0 [mem 0xfb617000-0xfb61700f 64bit] [ 0.574864] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.575109] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 conventional PCI endpoint [ 0.575354] pci 0000:00:16.1: BAR 0 [mem 0xfb616000-0xfb61600f 64bit] [ 0.575820] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.576164] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 conventional PCI endpoint [ 0.576390] pci 0000:00:1a.0: BAR 0 [mem 0xfb614000-0xfb6143ff] [ 0.576924] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.577261] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 PCIe Root Port [ 0.577568] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.577697] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.577825] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.578215] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.578421] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.578544] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.578844] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 PCIe Root Port [ 0.579081] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.579211] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.579339] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.579764] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.579960] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.580083] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.580387] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 PCIe Root Port [ 0.580694] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.580824] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.580929] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.581359] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.581555] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.581677] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.581972] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 PCIe Root Port [ 0.582279] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.582414] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.582547] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.582969] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.583169] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.583292] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.583625] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 conventional PCI endpoint [ 0.583855] pci 0000:00:1d.0: BAR 0 [mem 0xfb613000-0xfb6133ff] [ 0.584336] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.584665] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 conventional PCI endpoint [ 0.585463] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 conventional PCI endpoint [ 0.585685] pci 0000:00:1f.2: BAR 0 [io 0xf070-0xf077] [ 0.585843] pci 0000:00:1f.2: BAR 1 [io 0xf060-0xf063] [ 0.585960] pci 0000:00:1f.2: BAR 2 [io 0xf050-0xf057] [ 0.586117] pci 0000:00:1f.2: BAR 3 [io 0xf040-0xf043] [ 0.586273] pci 0000:00:1f.2: BAR 4 [io 0xf020-0xf03f] [ 0.586435] pci 0000:00:1f.2: BAR 5 [mem 0xfb612000-0xfb6127ff] [ 0.586746] pci 0000:00:1f.2: PME# supported from D3hot [ 0.587035] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 conventional PCI endpoint [ 0.587280] pci 0000:00:1f.3: BAR 0 [mem 0xfb611000-0xfb6110ff 64bit] [ 0.587524] pci 0000:00:1f.3: BAR 4 [io 0xf000-0xf01f] [ 0.587909] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 conventional PCI endpoint [ 0.588153] pci 0000:00:1f.6: BAR 0 [mem 0xfb610000-0xfb610fff 64bit] [ 0.588900] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.589109] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.589462] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 PCIe Endpoint [ 0.589701] pci 0000:03:00.0: BAR 0 [mem 0xfb506000-0xfb507fff 64bit] [ 0.590502] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 PCIe Endpoint [ 0.590741] pci 0000:03:00.1: BAR 0 [mem 0xfb504000-0xfb505fff 64bit] [ 0.591467] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 PCIe Endpoint [ 0.591705] pci 0000:03:00.2: BAR 0 [mem 0xfb502000-0xfb503fff 64bit] [ 0.592437] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 PCIe Endpoint [ 0.592676] pci 0000:03:00.3: BAR 0 [mem 0xfb500000-0xfb501fff 64bit] [ 0.593384] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.593753] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 PCIe Endpoint [ 0.593990] pci 0000:04:00.0: BAR 0 [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.594252] pci 0000:04:00.0: BAR 4 [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.594413] pci 0000:04:00.0: ROM [mem 0xfb480000-0xfb4fffff pref] [ 0.594766] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.594990] pci 0000:04:00.0: VF BAR 0 [mem 0x00000000-0x00003fff 64bit] [ 0.595111] pci 0000:04:00.0: VF BAR 0 [mem 0x00000000-0x000fffff 64bit]: contains BAR 0 for 64 VFs [ 0.595311] pci 0000:04:00.0: VF BAR 3 [mem 0x00000000-0x00003fff 64bit] [ 0.595431] pci 0000:04:00.0: VF BAR 3 [mem 0x00000000-0x000fffff 64bit]: contains BAR 3 for 64 VFs [ 0.596029] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 PCIe Endpoint [ 0.596268] pci 0000:04:00.1: BAR 0 [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.596530] pci 0000:04:00.1: BAR 4 [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.596690] pci 0000:04:00.1: ROM [mem 0xfb400000-0xfb47ffff pref] [ 0.597038] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.597242] pci 0000:04:00.1: VF BAR 0 [mem 0x00000000-0x00003fff 64bit] [ 0.597368] pci 0000:04:00.1: VF BAR 0 [mem 0x00000000-0x000fffff 64bit]: contains BAR 0 for 64 VFs [ 0.597567] pci 0000:04:00.1: VF BAR 3 [mem 0x00000000-0x00003fff 64bit] [ 0.597687] pci 0000:04:00.1: VF BAR 3 [mem 0x00000000-0x000fffff 64bit]: contains BAR 3 for 64 VFs [ 0.598331] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.598636] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.598939] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.599319] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.599439] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 PCIe Endpoint [ 0.599671] pci 0000:07:00.0: BAR 0 [mem 0xfb300000-0xfb37ffff] [ 0.599887] pci 0000:07:00.0: BAR 2 [io 0xe000-0xe01f] [ 0.599967] pci 0000:07:00.0: BAR 3 [mem 0xfb380000-0xfb383fff] [ 0.600506] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.600979] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.601364] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.601484] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 PCIe Endpoint [ 0.601719] pci 0000:08:00.0: BAR 0 [mem 0xfb200000-0xfb27ffff] [ 0.601940] pci 0000:08:00.0: BAR 2 [io 0xd000-0xd01f] [ 0.602104] pci 0000:08:00.0: BAR 3 [mem 0xfb280000-0xfb283fff] [ 0.602639] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.603109] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.603478] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 PCIe to PCI/PCI-X bridge [ 0.603802] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.603947] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.604077] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.604315] pci 0000:09:00.0: enabling Extended Tags [ 0.604662] pci 0000:09:00.0: supports D1 D2 [ 0.604776] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.605139] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.605457] pci_bus 0000:0a: extended config space not accessible [ 0.605629] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 conventional PCI endpoint [ 0.605867] pci 0000:0a:00.0: BAR 0 [mem 0xfa000000-0xfaffffff] [ 0.605967] pci 0000:0a:00.0: BAR 1 [mem 0xfb000000-0xfb01ffff] [ 0.606133] pci 0000:0a:00.0: BAR 2 [io 0xc000-0xc07f] [ 0.606486] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.606775] pci 0000:0a:00.0: supports D1 D2 [ 0.606888] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.607261] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.607706] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.607934] pci 0000:0b:00.0: BAR 0 [mem 0xfb160000-0xfb17ffff] [ 0.608142] pci 0000:0b:00.0: BAR 2 [io 0xb060-0xb07f] [ 0.608302] pci 0000:0b:00.0: BAR 3 [mem 0xfb18c000-0xfb18ffff] [ 0.608829] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.609035] pci 0000:0b:00.0: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.609158] pci 0000:0b:00.0: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.609372] pci 0000:0b:00.0: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.609494] pci 0000:0b:00.0: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.610070] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.610297] pci 0000:0b:00.1: BAR 0 [mem 0xfb140000-0xfb15ffff] [ 0.610505] pci 0000:0b:00.1: BAR 2 [io 0xb040-0xb05f] [ 0.610666] pci 0000:0b:00.1: BAR 3 [mem 0xfb188000-0xfb18bfff] [ 0.611205] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.611435] pci 0000:0b:00.1: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.611558] pci 0000:0b:00.1: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.611771] pci 0000:0b:00.1: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.611893] pci 0000:0b:00.1: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.612300] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.612533] pci 0000:0b:00.2: BAR 0 [mem 0xfb120000-0xfb13ffff] [ 0.612741] pci 0000:0b:00.2: BAR 2 [io 0xb020-0xb03f] [ 0.612901] pci 0000:0b:00.2: BAR 3 [mem 0xfb184000-0xfb187fff] [ 0.613318] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.613547] pci 0000:0b:00.2: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.613673] pci 0000:0b:00.2: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.613907] pci 0000:0b:00.2: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.614030] pci 0000:0b:00.2: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.614558] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.614784] pci 0000:0b:00.3: BAR 0 [mem 0xfb100000-0xfb11ffff] [ 0.614996] pci 0000:0b:00.3: BAR 2 [io 0xb000-0xb01f] [ 0.615163] pci 0000:0b:00.3: BAR 3 [mem 0xfb180000-0xfb183fff] [ 0.615680] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.615909] pci 0000:0b:00.3: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.616030] pci 0000:0b:00.3: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.616244] pci 0000:0b:00.3: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.616365] pci 0000:0b:00.3: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.616958] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.617114] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.617654] pci_bus 0000:00: on NUMA node 0 [ 0.617753] xen: registering gsi 13 triggering 1 polarity 0 [ 0.618720] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.618914] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.619109] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.619303] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.619490] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.619608] ACPI: PCI: Interrupt link LNKE disabled [ 0.619791] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.619908] ACPI: PCI: Interrupt link LNKF disabled [ 0.620095] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.620213] ACPI: PCI: Interrupt link LNKG disabled [ 0.620395] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.620519] ACPI: PCI: Interrupt link LNKH disabled [ 0.620817] xen:balloon: Initialising balloon driver [ 0.621017] iommu: Default domain type: Translated [ 0.621134] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.621313] SCSI subsystem initialized [ 0.621438] libata version 3.00 loaded. [ 0.621438] ACPI: bus type USB registered [ 0.621438] usbcore: registered new interface driver usbfs [ 0.621927] usbcore: registered new interface driver hub [ 0.622049] usbcore: registered new device driver usb [ 0.622178] pps_core: LinuxPPS API ver. 1 registered [ 0.622292] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.622443] PTP clock support registered [ 0.622579] Advanced Linux Sound Architecture Driver Initialized. [ 0.623132] NetLabel: Initializing [ 0.623245] NetLabel: domain hash size = 128 [ 0.623386] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.623520] NetLabel: unlabeled traffic allowed by default [ 0.623660] PCI: Using ACPI for IRQ routing [ 0.660042] PCI: pci_cache_line_size set to 64 bytes [ 0.660825] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.660828] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.660964] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.661086] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.661203] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.661351] vgaarb: loaded [ 0.661734] clocksource: Switched to clocksource tsc-early [ 0.661873] VFS: Disk quotas dquot_6.6.0 [ 0.661873] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.661873] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.661873] pnp: PnP ACPI init [ 0.662116] xen: registering gsi 8 triggering 1 polarity 0 [ 0.662116] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.662116] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.662116] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.662116] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.662984] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.663108] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.663227] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.663347] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.663467] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.663586] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.663706] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.663832] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.663968] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.664363] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.664485] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.664602] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.664720] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.664838] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.665277] xen: registering gsi 4 triggering 1 polarity 0 [ 0.665282] Already setup the GSI :4 [ 0.665395] pnp 00:03: [dma 0 disabled] [ 0.665702] xen: registering gsi 3 triggering 1 polarity 0 [ 0.665713] pnp 00:04: [dma 0 disabled] [ 0.666291] pnp: PnP ACPI: found 5 devices [ 0.698126] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.698333] NET: Registered PF_INET protocol family [ 0.698488] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.698842] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.699024] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.699206] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.699356] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.699525] TCP: Hash tables configured (established 4096 bind 4096) [ 0.699666] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.699788] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.699960] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.700279] RPC: Registered named UNIX socket transport module. [ 0.700400] RPC: Registered udp transport module. [ 0.700512] RPC: Registered tcp transport module. [ 0.700625] RPC: Registered tcp-with-tls transport module. [ 0.700740] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.701363] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.701533] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref]: assigned [ 0.701682] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.701856] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.702062] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.702198] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.703459] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.703606] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.703750] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.703896] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.704064] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.704211] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.704355] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.704500] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.704645] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.704790] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.704945] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.705106] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.705253] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.705400] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.705567] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.705712] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.705856] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.706020] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.706157] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.706327] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.706500] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.706673] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.706797] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.706971] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.707133] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.707252] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.707391] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.707552] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.707672] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.707812] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.707997] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.708124] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.708269] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.708449] pci 0000:0b:00.0: VF BAR 0 [mem 0x90000000-0x9001ffff 64bit pref]: assigned [ 0.708605] pci 0000:0b:00.0: VF BAR 3 [mem 0x90020000-0x9003ffff 64bit pref]: assigned [ 0.708757] pci 0000:0b:00.1: VF BAR 0 [mem 0x90040000-0x9005ffff 64bit pref]: assigned [ 0.708914] pci 0000:0b:00.1: VF BAR 3 [mem 0x90060000-0x9007ffff 64bit pref]: assigned [ 0.709090] pci 0000:0b:00.2: VF BAR 0 [mem 0x90080000-0x9009ffff 64bit pref]: assigned [ 0.709244] pci 0000:0b:00.2: VF BAR 3 [mem 0x900a0000-0x900bffff 64bit pref]: assigned [ 0.709396] pci 0000:0b:00.3: VF BAR 0 [mem 0x900c0000-0x900dffff 64bit pref]: assigned [ 0.709548] pci 0000:0b:00.3: VF BAR 3 [mem 0x900e0000-0x900fffff 64bit pref]: assigned [ 0.709735] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.709854] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.710020] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.710157] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.710329] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.710478] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.710597] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.710715] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.710835] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.710976] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.711109] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.711229] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.711373] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.711488] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.711607] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.711722] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.711841] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.711980] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.712107] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.712223] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.712346] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.712476] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.712595] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.713165] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.713378] xen: registering gsi 19 triggering 0 polarity 1 [ 0.713411] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.722270] xen: registering gsi 18 triggering 0 polarity 1 [ 0.722295] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.739364] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x7c0 took 16742 usecs [ 0.739649] xen: registering gsi 18 triggering 0 polarity 1 [ 0.739655] Already setup the GSI :18 [ 0.757095] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x7c0 took 17128 usecs [ 0.757312] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.757487] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.757566] Unpacking initramfs... [ 0.757607] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.757943] kvm_intel: VMX not supported by CPU 1 [ 0.758085] kvm_amd: CPU 1 isn't AMD or Hygon [ 0.758202] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.758439] clocksource: Switched to clocksource tsc [ 0.765720] Initialise system trusted keyrings [ 0.765988] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.766374] NFS: Registering the id_resolver key type [ 0.766496] Key type id_resolver registered [ 0.766607] Key type id_legacy registered [ 0.766824] 9p: Installing v9fs 9p2000 file system support [ 0.784442] Key type asymmetric registered [ 0.784569] Asymmetric key parser 'x509' registered [ 0.784708] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.784874] io scheduler mq-deadline registered [ 0.784988] io scheduler kyber registered [ 0.785674] xen: registering gsi 16 triggering 0 polarity 1 [ 0.785709] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.786133] xen: registering gsi 16 triggering 0 polarity 1 [ 0.786139] Already setup the GSI :16 [ 0.786606] xen: registering gsi 16 triggering 0 polarity 1 [ 0.786612] Already setup the GSI :16 [ 0.786946] xen: registering gsi 16 triggering 0 polarity 1 [ 0.786951] Already setup the GSI :16 [ 0.787267] xen: registering gsi 16 triggering 0 polarity 1 [ 0.787272] Already setup the GSI :16 [ 0.787758] xen: registering gsi 16 triggering 0 polarity 1 [ 0.787763] Already setup the GSI :16 [ 0.788243] xen: registering gsi 16 triggering 0 polarity 1 [ 0.788249] Already setup the GSI :16 [ 0.788698] xen: registering gsi 17 triggering 0 polarity 1 [ 0.788718] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.789078] xen: registering gsi 19 triggering 0 polarity 1 [ 0.789083] Already setup the GSI :19 [ 0.789523] xen: registering gsi 16 triggering 0 polarity 1 [ 0.789528] Already setup the GSI :16 [ 0.790206] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.790384] ACPI: button: Power Button [PWRB] [ 0.790530] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.790789] ACPI: button: Power Button [PWRF] [ 0.791099] Monitor-Mwait will be used to enter C-1 state [ 0.791139] Monitor-Mwait will be used to enter C-2 state [ 0.791155] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.791486] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.791829] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.792691] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.793328] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.793862] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.794334] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.794853] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.795744] xen:xen_evtchn: Event-channel device installed [ 0.795991] xen_pciback: backend is vpci [ 0.796788] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.797247] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.798090] hpet_acpi_add: no address or irqs in _CRS [ 0.798334] Non-volatile memory driver v1.3 [ 0.800755] loop: module loaded [ 0.807102] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 0.807131] ahci 0000:00:1f.2: version 3.0 [ 0.807324] xen: registering gsi 16 triggering 0 polarity 1 [ 0.807334] Already setup the GSI :16 [ 0.807678] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 6 Gbps, SATA mode [ 0.807846] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 0.807972] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.823398] scsi host0: ahci [ 0.823726] scsi host1: ahci [ 0.824070] scsi host2: ahci [ 0.824388] scsi host3: ahci [ 0.824708] scsi host4: ahci [ 0.825051] scsi host5: ahci [ 0.825199] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 83 lpm-pol 0 [ 0.825347] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 83 lpm-pol 0 [ 0.825492] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 83 lpm-pol 0 [ 0.825638] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 83 lpm-pol 0 [ 0.825794] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 83 lpm-pol 0 [ 0.825943] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 83 lpm-pol 0 [ 0.826427] tun: Universal TUN/TAP device driver, 1.6 [ 0.826711] e100: Intel(R) PRO/100 Network Driver [ 0.826849] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.826987] sky2: driver version 1.30 [ 0.827170] xen_netfront: Initialising Xen virtual ethernet driver [ 0.828701] xen: registering gsi 19 triggering 0 polarity 1 [ 0.828711] Already setup the GSI :19 [ 0.828879] xen: registering gsi 18 triggering 0 polarity 1 [ 0.828891] Already setup the GSI :18 [ 0.828959] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.828970] xen: registering gsi 18 triggering 0 polarity 1 [ 0.828977] Already setup the GSI :18 [ 0.829330] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.830548] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.831058] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.831070] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.831285] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.831377] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 0.831444] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.831550] ehci-pci 0000:00:1d.0: debug port 2 [ 0.831820] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.831988] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.832134] usb usb1: Product: xHCI Host Controller [ 0.832250] usb usb1: Manufacturer: Linux 6.10.0-rc5+ xhci-hcd [ 0.832370] usb usb1: SerialNumber: 0000:00:14.0 [ 0.832803] hub 1-0:1.0: USB hub found [ 0.832968] hub 1-0:1.0: 8 ports detected [ 0.834345] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.10 [ 0.834500] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.834646] usb usb2: Product: xHCI Host Controller [ 0.834779] usb usb2: Manufacturer: Linux 6.10.0-rc5+ xhci-hcd [ 0.834899] usb usb2: SerialNumber: 0000:00:14.0 [ 0.835236] hub 2-0:1.0: USB hub found [ 0.835386] hub 2-0:1.0: 6 ports detected [ 0.835857] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.836572] usbcore: registered new interface driver usblp [ 0.836702] usbcore: registered new interface driver usb-storage [ 0.836872] i8042: PNP: No PS/2 controller found. [ 0.837183] rtc_cmos 00:00: RTC can wake from S4 [ 0.837835] rtc_cmos 00:00: registered as rtc0 [ 0.837997] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.838184] device-mapper: uevent: version 1.0.3 [ 0.838398] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.838529] xen: registering gsi 18 triggering 0 polarity 1 [ 0.838602] intel_pstate: CPU model not supported [ 0.838603] Already setup the GSI :18 [ 0.838657] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.838781] hid: raw HID events driver (C) Jiri Kosina [ 0.838906] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.839241] usbcore: registered new interface driver usbhid [ 0.839411] usbhid: USB HID core driver [ 0.840137] Initializing XFRM netlink socket [ 0.840299] NET: Registered PF_INET6 protocol family [ 0.840819] Segment Routing with IPv6 [ 0.840942] In-situ OAM (IOAM) with IPv6 [ 0.841090] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.841407] NET: Registered PF_PACKET protocol family [ 0.841549] 9pnet: Installing 9P2000 support [ 0.841676] Key type dns_resolver registered [ 0.842792] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.842798] IPI shorthand broadcast: enabled [ 0.843047] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.843200] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.843343] usb usb3: Product: EHCI Host Controller [ 0.843457] usb usb3: Manufacturer: Linux 6.10.0-rc5+ ehci_hcd [ 0.843575] usb usb3: SerialNumber: 0000:00:1d.0 [ 0.844015] hub 3-0:1.0: USB hub found [ 0.844162] hub 3-0:1.0: 2 ports detected [ 0.844581] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.844852] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 4 [ 0.845030] ehci-pci 0000:00:1a.0: debug port 2 [ 0.846197] sched_clock: Marking stable (805005764, 40738085)->(1731486415, -885742566) [ 0.846833] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.849143] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.849364] registered taskstats version 1 [ 0.849484] Loading compiled-in X.509 certificates [ 0.851145] PM: Magic number: 12:259:859 [ 0.851386] printk: legacy console [netcon0] enabled [ 0.851503] netconsole: network logging started [ 0.851900] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.855814] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.856151] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.856307] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.856452] usb usb4: Product: EHCI Host Controller [ 0.856595] usb usb4: Manufacturer: Linux 6.10.0-rc5+ ehci_hcd [ 0.856713] usb usb4: SerialNumber: 0000:00:1a.0 [ 0.857034] hub 4-0:1.0: USB hub found [ 0.857183] hub 4-0:1.0: 2 ports detected [ 0.871051] Freeing initrd memory: 20120K [ 0.882966] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.883309] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.883472] ALSA device list: [ 0.883582] No soundcards found. [ 0.884275] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 1.075806] usb 1-3: new high-speed USB device number 2 using xhci_hcd [ 1.083871] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 1.099997] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 1.136990] ata1: SATA link down (SStatus 0 SControl 300) [ 1.137130] ata6: SATA link down (SStatus 0 SControl 300) [ 1.137269] ata4: SATA link down (SStatus 0 SControl 300) [ 1.137428] ata5: SATA link down (SStatus 0 SControl 300) [ 1.137569] ata2: SATA link down (SStatus 0 SControl 300) [ 1.137728] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.138989] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.203525] usb 1-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.203679] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.203815] usb 1-3: Product: USB2.0 Hub [ 1.204682] hub 1-3:1.0: USB hub found [ 1.205196] hub 1-3:1.0: 4 ports detected [ 1.212166] usb 3-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.212320] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.212699] hub 3-1:1.0: USB hub found [ 1.212916] hub 3-1:1.0: 4 ports detected [ 1.226951] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.227079] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.228294] usb 4-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.228449] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.228826] hub 4-1:1.0: USB hub found [ 1.229044] hub 4-1:1.0: 4 ports detected [ 1.254651] ata3.00: configured for UDMA/133 [ 1.254982] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.255868] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.255899] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.256192] sd 2:0:0:0: [sda] Write Protect is off [ 1.256311] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.256374] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.256628] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.273952] sda: sda1 sda2 < sda5 > [ 1.274473] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.276418] Freeing unused kernel image (initmem) memory: 2680K [ 1.276558] Write protecting the kernel read-only data: 24576k [ 1.296792] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 1.321818] usb 1-4: new high-speed USB device number 3 using xhci_hcd [ 1.448093] usb 1-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.448248] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.448989] hub 1-4:1.0: USB hub found [ 1.449203] hub 1-4:1.0: 4 ports detected [ 1.741780] usb 1-4.1: new low-speed USB device number 4 using xhci_hcd [ 1.783099] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.783295] Run /init as init process [ 1.783414] with arguments: [ 1.783415] /init [ 1.783417] placeholder [ 1.783418] with environment: [ 1.783419] HOME=/ [ 1.783420] TERM=linux [ 1.847254] usb 1-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.847421] usb 1-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.853314] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.0/0003:0557:2419.0001/input/input2 [ 1.908277] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 1.911230] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.1/0003:0557:2419.0002/input/input3 [ 1.911617] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 1.954846] usb 1-3.2: new high-speed USB device number 5 using xhci_hcd [ 2.032286] usb 1-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 2.032450] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.032595] usb 1-3.2: Product: USB2.0 Hub [ 2.033526] hub 1-3.2:1.0: USB hub found [ 2.033987] hub 1-3.2:1.0: 4 ports detected [ 2.227825] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.227987] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.228331] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20240322/nsprepkg-94) [ 2.229646] xen: registering gsi 16 triggering 0 polarity 1 [ 2.229655] Already setup the GSI :16 [ 2.233970] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.234128] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.234398] xen: registering gsi 16 triggering 0 polarity 1 [ 2.234409] Already setup the GSI :16 [ 2.263313] pps pps0: new PPS source ptp0 [ 2.263499] igb 0000:07:00.0: added PHC on eth0 [ 2.263634] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.263775] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:93:a4:c8 [ 2.263960] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.264075] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.264311] xen: registering gsi 17 triggering 0 polarity 1 [ 2.264319] Already setup the GSI :17 [ 2.293109] pps pps1: new PPS source ptp1 [ 2.293345] igb 0000:08:00.0: added PHC on eth1 [ 2.293479] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.293600] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:93:a4:c9 [ 2.293783] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.293899] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.294125] xen: registering gsi 16 triggering 0 polarity 1 [ 2.294132] Already setup the GSI :16 [ 2.351551] igb 0000:0b:00.0: added PHC on eth2 [ 2.351692] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.351834] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:93:a4:ca [ 2.352038] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.352153] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.352389] xen: registering gsi 17 triggering 0 polarity 1 [ 2.352399] Already setup the GSI :17 [ 2.410967] igb 0000:0b:00.1: added PHC on eth3 [ 2.411106] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.411227] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:93:a4:cb [ 2.411431] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.411546] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.411797] xen: registering gsi 18 triggering 0 polarity 1 [ 2.411805] Already setup the GSI :18 [ 2.468036] igb 0000:0b:00.2: added PHC on eth4 [ 2.468178] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.468299] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:93:a4:cc [ 2.468502] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.468618] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.468874] xen: registering gsi 19 triggering 0 polarity 1 [ 2.468884] Already setup the GSI :19 [ 2.525875] igb 0000:0b:00.3: added PHC on eth5 [ 2.526025] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.526146] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:93:a4:cd [ 2.526349] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.526465] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.528994] igb 0000:0b:00.0 enx0cc47a93a4ca: renamed from eth2 [ 2.529429] igb 0000:08:00.0 enx0cc47a93a4c9: renamed from eth1 [ 2.530122] igb 0000:07:00.0 enx0cc47a93a4c8: renamed from eth0 [ 2.530628] igb 0000:0b:00.1 enx0cc47a93a4cb: renamed from eth3 [ 2.531132] igb 0000:0b:00.2 enx0cc47a93a4cc: renamed from eth4 [ 2.532198] igb 0000:0b:00.3 enx0cc47a93a4cd: renamed from eth5 [ 2.960673] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.089130] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.089362] ixgbe 0000:04:00.0: 0c:c4:7a:93:a8:9e [ 3.383990] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.384324] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20240322/nsprepkg-94) [ 3.384541] xen: registering gsi 17 triggering 0 polarity 1 [ 3.384552] Already setup the GSI :17 [ 4.127473] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.255790] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.255946] ixgbe 0000:04:00.1: 0c:c4:7a:93:a8:9f [ 4.551896] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.554270] ixgbe 0000:04:00.1 enx0cc47a93a89f: renamed from eth1 [ 4.554637] ixgbe 0000:04:00.0 enx0cc47a93a89e: renamed from eth0 [ 4.969988] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 4.976849] EXT4-fs (dm-0): mounted filesystem 5b155306-df56-406a-93ad-ef46e95e5c21 ro with ordered data mode. Quota mode: none. [ 8.581005] EXT4-fs (dm-0): re-mounted 5b155306-df56-406a-93ad-ef46e95e5c21 r/w. Quota mode: none. [ 9.806503] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.829862] EXT4-fs (sda1): mounted filesystem fb3e889e-1e41-4eca-ad98-51a684bedf30 r/w with ordered data mode. Quota mode: none. [ 9.905315] Adding 1949692k swap on /dev/mapper/debina1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.473827] xenbr0: port 1(enx0cc47a93a4c8) entered blocking state [ 11.474003] xenbr0: port 1(enx0cc47a93a4c8) entered disabled state [ 11.474134] igb 0000:07:00.0 enx0cc47a93a4c8: entered allmulticast mode [ 11.474301] igb 0000:07:00.0 enx0cc47a93a4c8: entered promiscuous mode [ 14.453339] igb 0000:07:00.0 enx0cc47a93a4c8: igb: enx0cc47a93a4c8 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 14.666150] xenbr0: port 1(enx0cc47a93a4c8) entered blocking state [ 14.666313] xenbr0: port 1(enx0cc47a93a4c8) entered forwarding state