[ 0.000000] Linux version 6.10.0-rc5+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Thu Jun 27 22:42:25 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/pinot1--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000f6000000-0x00000000f6003fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SML/H8SML, BIOS 3.5 11/25/2013 [ 0.000000] DMI: Memory slots populated: 2/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000073] Xen PV: Detected 4 vCPUS [ 0.000579] tsc: Detected 2800.002 MHz processor [ 0.001739] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001763] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001781] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.001789] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.001795] MTRRs set to read-only [ 0.001810] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.229421] RAMDISK: [mem 0x04000000-0x053b7fff] [ 0.229451] ACPI: Early table checksum verification disabled [ 0.231276] ACPI: RSDP 0x00000000000FA1C0 000024 (v02 ACPIAM) [ 0.231320] ACPI: XSDT 0x00000000DFEA0100 00007C (v01 SMCI 20131125 MSFT 00000097) [ 0.231410] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.231491] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20240322/tbfadt-560) [ 0.231547] ACPI: DSDT 0x00000000DFEA0600 00562B (v01 1CF11 1CF11000 00000000 INTL 20051117) [ 0.231600] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.231653] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.231710] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.231769] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.231826] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.231885] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.231937] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.231991] ACPI: SSDT 0x00000000DFEAA6F0 000B9C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.232042] ACPI: EINJ 0x00000000DFEAB290 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.232094] ACPI: BERT 0x00000000DFEAB420 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.232152] ACPI: ERST 0x00000000DFEAB450 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.232208] ACPI: HEST 0x00000000DFEAB660 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.232242] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.232249] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c2a] [ 0.232253] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.232258] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.232262] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.232266] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.232270] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.232275] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.232279] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.232283] ACPI: Reserving SSDT table memory at [mem 0xdfeaa6f0-0xdfeab28b] [ 0.232288] ACPI: Reserving EINJ table memory at [mem 0xdfeab290-0xdfeab3bf] [ 0.232292] ACPI: Reserving BERT table memory at [mem 0xdfeab420-0xdfeab44f] [ 0.232297] ACPI: Reserving ERST table memory at [mem 0xdfeab450-0xdfeab65f] [ 0.232300] ACPI: Reserving HEST table memory at [mem 0xdfeab660-0xdfeab707] [ 0.232769] APIC: Switched APIC routing to: Xen PV [ 0.252739] Zone ranges: [ 0.252753] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.252763] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.252771] Normal empty [ 0.252780] Movable zone start for each node [ 0.252785] Early memory node ranges [ 0.252789] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.252796] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.252801] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.252818] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.252960] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.262348] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.262367] p2m virtual area at (____ptrval____), size is 40000000 [ 0.496331] Remapped 102 page(s) [ 0.496848] ACPI: PM-Timer IO Port: 0x808 [ 0.496873] CPU topo: CPU limit of 4 reached. Ignoring further CPUs [ 0.496897] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.496900] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.496920] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.496928] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.496937] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.496941] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.496959] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.496963] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.496974] CPU topo: Max. logical packages: 1 [ 0.496975] CPU topo: Max. logical dies: 1 [ 0.496975] CPU topo: Max. dies per package: 1 [ 0.496981] CPU topo: Max. threads per core: 1 [ 0.496983] CPU topo: Num. cores per package: 4 [ 0.496983] CPU topo: Num. threads per package: 4 [ 0.496984] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.496985] CPU topo: Rejected CPUs 4 [ 0.497001] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.497004] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.497005] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.497007] [mem 0x20066000-0xdfe9dfff] available for PCI devices [ 0.497011] Booting kernel on Xen [ 0.497012] Xen version: 4.19-unstable (preserve-AD) [ 0.497016] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.503281] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.503845] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u524288 [ 0.503853] pcpu-alloc: s194408 r8192 d30872 u524288 alloc=1*2097152 [ 0.503857] pcpu-alloc: [0] 0 1 2 3 [ 0.503911] xen: PV spinlocks enabled [ 0.503915] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.503918] Kernel command line: placeholder root=/dev/mapper/pinot1--vg-root ro console=hvc0 [ 0.503973] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.504099] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.504159] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.504345] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.504348] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.504351] software IO TLB: area num 4. [ 0.584977] Memory: 386444K/524284K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 137588K reserved, 0K cma-reserved) [ 0.585082] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.587568] Dynamic Preempt: voluntary [ 0.587666] rcu: Preemptible hierarchical RCU implementation. [ 0.587667] rcu: RCU event tracing is enabled. [ 0.587668] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.587670] Trampoline variant of Tasks RCU enabled. [ 0.587671] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.587673] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.587688] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.594329] NR_IRQS: 4352, nr_irqs: 1000, preallocated irqs: 16 [ 0.594457] xen:events: Using FIFO-based ABI [ 0.594479] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.594485] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.594491] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.594496] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.594501] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.594506] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.594511] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.594516] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.594521] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.594526] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.594531] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.594536] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.594541] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.594547] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.594553] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.594562] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.600609] Console: colour VGA+ 80x25 [ 0.600613] printk: legacy console [tty0] enabled [ 0.613989] printk: legacy console [hvc0] enabled [ 0.614660] ACPI: Core revision 20240322 [ 0.617231] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.617386] Xen: using vcpuop timer interface [ 0.617391] installing Xen timer for CPU 0 [ 0.617619] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c427961f, max_idle_ns: 440795275103 ns [ 0.617774] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.00 BogoMIPS (lpj=2800002) [ 0.617962] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.618180] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.618298] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.618410] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.618781] Spectre V2 : Mitigation: Retpolines [ 0.618882] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.619024] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.619132] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.619239] RETBleed: Mitigation: untrained return thunk [ 0.619344] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.619486] Speculative Store Bypass: Vulnerable [ 0.619630] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.619770] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.619889] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.619997] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.620105] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.642402] Freeing SMP alternatives memory: 40K [ 0.642521] pid_max: default: 32768 minimum: 301 [ 0.642674] LSM: initializing lsm=capability,selinux [ 0.642778] SELinux: Initializing. [ 0.642912] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.643054] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.643899] cpu 0 spinlock event irq 57 [ 0.644012] VPMU disabled by hypervisor. [ 0.644506] Performance Events: PMU not available due to virtualization, using software events only. [ 0.644666] signal: max sigframe size: 1776 [ 0.644820] rcu: Hierarchical SRCU implementation. [ 0.644924] rcu: Max phase no-delay instances is 400. [ 0.651325] smp: Bringing up secondary CPUs ... [ 0.651643] installing Xen timer for CPU 1 [ 0.652080] installing Xen timer for CPU 2 [ 0.652470] installing Xen timer for CPU 3 [ 0.024206] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0011 [ 0.652820] cpu 1 spinlock event irq 77 [ 0.024206] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0012 [ 0.653062] cpu 2 spinlock event irq 78 [ 0.024206] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0013 [ 0.653781] cpu 3 spinlock event irq 79 [ 0.653880] smp: Brought up 1 node, 4 CPUs [ 0.654154] devtmpfs: initialized [ 0.654154] x86/mm: Memory block size: 128MB [ 0.655221] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.655221] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.655221] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.655776] PM: RTC time: 23:57:30, date: 2024-06-27 [ 0.656047] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.656192] xen:grant_table: Grant tables using version 1 layout [ 0.656313] Grant table initialized [ 0.656661] audit: initializing netlink subsys (disabled) [ 0.656806] audit: type=2000 audit(1719532650.695:1): state=initialized audit_enabled=0 res=1 [ 0.656896] thermal_sys: Registered thermal governor 'step_wise' [ 0.656896] thermal_sys: Registered thermal governor 'user_space' [ 0.657037] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.657779] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.738985] PCI: Using configuration type 1 for base access [ 0.739200] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.739837] ACPI: Added _OSI(Module Device) [ 0.739916] ACPI: Added _OSI(Processor Device) [ 0.740018] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.740119] ACPI: Added _OSI(Processor Aggregator Device) [ 0.745187] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.745733] xen: registering gsi 9 triggering 0 polarity 1 [ 0.747892] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.748265] ACPI: Interpreter enabled [ 0.748383] ACPI: PM: (supports S0 S1 S4 S5) [ 0.748484] ACPI: Using IOAPIC for interrupt routing [ 0.748815] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.748962] PCI: Using E820 reservations for host bridge windows [ 0.749234] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.759140] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.759256] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.759409] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.759519] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.759661] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.760054] PCI host bridge to bus 0000:00 [ 0.760156] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.760292] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.760403] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.760544] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.760685] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.760777] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.760968] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.761497] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.762021] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.762234] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.762357] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.762471] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.762659] pci 0000:00:09.0: enabling Extended Tags [ 0.762894] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.763177] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.763388] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.763504] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.763617] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.763794] pci 0000:00:0a.0: enabling Extended Tags [ 0.764029] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.764335] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f conventional PCI endpoint [ 0.764523] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.764651] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.764786] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.764913] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.765041] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.765199] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.765363] pci 0000:00:11.0: set SATA to AHCI mode [ 0.765681] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.765820] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.766230] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.766425] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.766827] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.767014] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.767345] pci 0000:00:12.2: supports D1 D2 [ 0.767469] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.767738] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.767820] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.768204] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.768392] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.768826] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.769018] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.769363] pci 0000:00:13.2: supports D1 D2 [ 0.769464] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.769784] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.770297] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.770523] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.770658] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.770786] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.770913] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.771065] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.771223] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.771333] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.771441] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.771551] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.771881] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.772402] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.772642] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.772769] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.772890] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.773180] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.773390] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.773800] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.774149] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.774460] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.774828] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.775177] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.775485] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.775972] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.776164] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.776326] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.776458] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.776833] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.779816] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.780120] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.780313] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.780476] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.780635] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.781011] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.783816] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.783983] pci_bus 0000:03: extended config space not accessible [ 0.784153] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.784359] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.784493] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.784626] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.784870] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.785262] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.785393] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.785558] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.785712] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.785777] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.785924] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.786137] pci_bus 0000:00: on NUMA node 0 [ 0.786619] xen: registering gsi 13 triggering 1 polarity 0 [ 0.787052] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.787236] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.787412] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.787613] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.787789] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.787963] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.788141] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.788323] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.788535] xen:balloon: Initialising balloon driver [ 0.788803] iommu: Default domain type: Translated [ 0.788908] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.789081] SCSI subsystem initialized [ 0.789192] libata version 3.00 loaded. [ 0.789192] ACPI: bus type USB registered [ 0.789192] usbcore: registered new interface driver usbfs [ 0.789192] usbcore: registered new interface driver hub [ 0.789192] usbcore: registered new device driver usb [ 0.789796] pps_core: LinuxPPS API ver. 1 registered [ 0.789899] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.790075] PTP clock support registered [ 0.790198] Advanced Linux Sound Architecture Driver Initialized. [ 0.790198] NetLabel: Initializing [ 0.790777] NetLabel: domain hash size = 128 [ 0.790878] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.791001] NetLabel: unlabeled traffic allowed by default [ 0.791152] PCI: Using ACPI for IRQ routing [ 0.817942] PCI: pci_cache_line_size set to 64 bytes [ 0.818106] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.818109] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.818132] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.818132] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.818132] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.818179] vgaarb: loaded [ 0.820679] clocksource: Switched to clocksource tsc-early [ 0.820679] VFS: Disk quotas dquot_6.6.0 [ 0.820679] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.820679] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.820679] pnp: PnP ACPI init [ 0.820769] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.820897] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.820897] xen: registering gsi 8 triggering 1 polarity 0 [ 0.820897] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.821951] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.822066] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.822480] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.822589] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.822697] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.822824] system 00:05: [io 0x040b] has been reserved [ 0.822996] system 00:05: [io 0x04d6] has been reserved [ 0.823107] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.823215] system 00:05: [io 0x0c14] has been reserved [ 0.823320] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.823428] system 00:05: [io 0x0c52] has been reserved [ 0.823533] system 00:05: [io 0x0c6c] has been reserved [ 0.823638] system 00:05: [io 0x0c6f] has been reserved [ 0.823742] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.823866] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.823974] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.824082] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.824215] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.824361] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.824468] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.824576] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.824683] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.824807] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.824915] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.825023] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.825133] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.825242] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.825602] xen: registering gsi 4 triggering 1 polarity 0 [ 0.825606] Already setup the GSI :4 [ 0.825708] pnp 00:06: [dma 0 disabled] [ 0.826006] xen: registering gsi 3 triggering 1 polarity 0 [ 0.826017] pnp 00:07: [dma 0 disabled] [ 0.826165] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.826503] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.826698] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.826829] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.826941] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.827056] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.827327] pnp: PnP ACPI: found 10 devices [ 0.846476] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.846613] NET: Registered PF_INET protocol family [ 0.846761] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.847156] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.847303] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.847470] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.847618] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.847791] TCP: Hash tables configured (established 4096 bind 4096) [ 0.847961] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.848103] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.848251] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.848539] RPC: Registered named UNIX socket transport module. [ 0.848672] RPC: Registered udp transport module. [ 0.848784] RPC: Registered tcp transport module. [ 0.848890] RPC: Registered tcp-with-tls transport module. [ 0.848994] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.849489] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.849604] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.849721] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.849878] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.849984] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.850099] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.850226] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.850339] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.850455] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.850611] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.850741] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.850861] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.850973] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.851108] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.851218] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.851323] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.851430] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.851535] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.851643] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.851751] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.851875] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.851992] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.852128] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.852238] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.852362] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.852606] xen: registering gsi 16 triggering 0 polarity 1 [ 0.852628] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.515928] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 647837 usecs [ 1.516152] xen: registering gsi 16 triggering 0 polarity 1 [ 1.516159] Already setup the GSI :16 [ 1.539925] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 23269 usecs [ 1.540177] xen: registering gsi 17 triggering 0 polarity 1 [ 1.540221] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.540391] xen: registering gsi 18 triggering 0 polarity 1 [ 1.540407] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.563921] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 23029 usecs [ 1.564145] xen: registering gsi 18 triggering 0 polarity 1 [ 1.564152] Already setup the GSI :18 [ 1.587931] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 23281 usecs [ 1.588159] xen: registering gsi 19 triggering 0 polarity 1 [ 1.588196] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.588385] xen: registering gsi 18 triggering 0 polarity 1 [ 1.588389] Already setup the GSI :18 [ 1.611931] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 23044 usecs [ 1.612141] PCI: CLS 64 bytes, default 64 [ 1.612274] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.612383] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 1.612569] kvm_intel: VMX not supported by CPU 1 [ 1.612672] kvm_amd: SVM not supported by CPU 1 [ 1.612792] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c427961f, max_idle_ns: 440795275103 ns [ 1.613097] clocksource: Switched to clocksource tsc [ 1.613283] Unpacking initramfs... [ 1.690938] Initialise system trusted keyrings [ 1.691211] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.691539] NFS: Registering the id_resolver key type [ 1.691650] Key type id_resolver registered [ 1.691750] Key type id_legacy registered [ 1.691940] 9p: Installing v9fs 9p2000 file system support [ 1.709552] Key type asymmetric registered [ 1.709655] Asymmetric key parser 'x509' registered [ 1.709774] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.709940] io scheduler mq-deadline registered [ 1.710041] io scheduler kyber registered [ 1.710579] xen: registering gsi 53 triggering 0 polarity 1 [ 1.710609] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.710870] xen: registering gsi 54 triggering 0 polarity 1 [ 1.710886] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.711255] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.711434] ACPI: button: Power Button [PWRB] [ 1.711577] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.711848] ACPI: button: Power Button [PWRF] [ 1.714099] ACPI: \_PR_.P001: Found 2 idle states [ 1.714372] ACPI: \_PR_.P002: Found 2 idle states [ 1.714528] ACPI: \_PR_.P003: Found 2 idle states [ 1.714673] ACPI: \_PR_.P004: Found 2 idle states [ 1.715379] xen:xen_evtchn: Event-channel device installed [ 1.715591] xen_pciback: backend is vpci [ 1.716417] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.716855] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.717656] hpet_acpi_add: no address or irqs in _CRS [ 1.717833] Non-volatile memory driver v1.3 [ 1.721888] loop: module loaded [ 1.728648] ahci 0000:00:11.0: version 3.0 [ 1.728753] xen: registering gsi 22 triggering 0 polarity 1 [ 1.728782] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.728929] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.729077] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.729186] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.730468] scsi host0: ahci [ 1.730825] scsi host1: ahci [ 1.731146] scsi host2: ahci [ 1.731521] scsi host3: ahci [ 1.731674] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 0 [ 1.731845] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 0 [ 1.731990] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 0 [ 1.732154] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 0 [ 1.732755] tun: Universal TUN/TAP device driver, 1.6 [ 1.732971] e100: Intel(R) PRO/100 Network Driver [ 1.733100] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.733228] sky2: driver version 1.30 [ 1.733426] xen_netfront: Initialising Xen virtual ethernet driver [ 1.733788] xen: registering gsi 16 triggering 0 polarity 1 [ 1.733795] Already setup the GSI :16 [ 1.733950] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.734008] xen: registering gsi 19 triggering 0 polarity 1 [ 1.734066] Already setup the GSI :19 [ 1.734070] xen: registering gsi 17 triggering 0 polarity 1 [ 1.734075] Already setup the GSI :17 [ 1.734130] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.734264] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.765651] Freeing initrd memory: 20192K [ 1.790483] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.790634] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.790774] usb usb1: Product: OHCI PCI host controller [ 1.790879] usb usb1: Manufacturer: Linux 6.10.0-rc5+ ohci_hcd [ 1.790985] usb usb1: SerialNumber: 0000:00:12.0 [ 1.791320] hub 1-0:1.0: USB hub found [ 1.791452] hub 1-0:1.0: 3 ports detected [ 1.791903] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.791994] xen: registering gsi 16 triggering 0 polarity 1 [ 1.792019] Already setup the GSI :16 [ 1.792164] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.792334] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.792503] ehci-pci 0000:00:13.2: debug port 1 [ 1.792712] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 1.799261] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.799471] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 1.799616] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.799756] usb usb2: Product: EHCI Host Controller [ 1.799861] usb usb2: Manufacturer: Linux 6.10.0-rc5+ ehci_hcd [ 1.799970] usb usb2: SerialNumber: 0000:00:13.2 [ 1.800252] hub 2-0:1.0: USB hub found [ 1.800383] hub 2-0:1.0: 6 ports detected [ 1.859470] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.859711] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3 [ 1.859854] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.860019] ehci-pci 0000:00:12.2: debug port 1 [ 1.860277] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.867259] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.867432] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 1.867580] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.867720] usb usb3: Product: EHCI Host Controller [ 1.867823] usb usb3: Manufacturer: Linux 6.10.0-rc5+ ehci_hcd [ 1.867933] usb usb3: SerialNumber: 0000:00:12.2 [ 1.868216] hub 3-0:1.0: USB hub found [ 1.868353] hub 3-0:1.0: 6 ports detected [ 1.920307] hub 1-0:1.0: USB hub found [ 1.920424] hub 1-0:1.0: 3 ports detected [ 1.920702] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.920910] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.921087] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 1.977368] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.977558] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.977698] usb usb4: Product: OHCI PCI host controller [ 1.977801] usb usb4: Manufacturer: Linux 6.10.0-rc5+ ohci_hcd [ 1.977907] usb usb4: SerialNumber: 0000:00:12.1 [ 1.978205] hub 4-0:1.0: USB hub found [ 1.978352] hub 4-0:1.0: 3 ports detected [ 1.978806] xen: registering gsi 18 triggering 0 polarity 1 [ 1.978811] Already setup the GSI :18 [ 1.978975] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.979173] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.979388] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 2.035438] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 2.035589] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.035766] usb usb5: Product: OHCI PCI host controller [ 2.035870] usb usb5: Manufacturer: Linux 6.10.0-rc5+ ohci_hcd [ 2.035976] usb usb5: SerialNumber: 0000:00:13.0 [ 2.036286] hub 5-0:1.0: USB hub found [ 2.036416] hub 5-0:1.0: 3 ports detected [ 2.036837] xen: registering gsi 18 triggering 0 polarity 1 [ 2.036843] Already setup the GSI :18 [ 2.036978] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 2.037200] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 2.037414] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 2.039226] ata3: SATA link down (SStatus 0 SControl 300) [ 2.039372] ata4: SATA link down (SStatus 0 SControl 300) [ 2.093440] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 2.093590] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.093729] usb usb6: Product: OHCI PCI host controller [ 2.093833] usb usb6: Manufacturer: Linux 6.10.0-rc5+ ohci_hcd [ 2.093978] usb usb6: SerialNumber: 0000:00:13.1 [ 2.094263] hub 6-0:1.0: USB hub found [ 2.094394] hub 6-0:1.0: 3 ports detected [ 2.094809] xen: registering gsi 18 triggering 0 polarity 1 [ 2.094814] Already setup the GSI :18 [ 2.094950] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.095133] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.095347] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 2.151449] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 2.151599] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.151738] usb usb7: Product: OHCI PCI host controller [ 2.151842] usb usb7: Manufacturer: Linux 6.10.0-rc5+ ohci_hcd [ 2.151948] usb usb7: SerialNumber: 0000:00:14.5 [ 2.152282] hub 7-0:1.0: USB hub found [ 2.152412] hub 7-0:1.0: 2 ports detected [ 2.152769] usbcore: registered new interface driver usblp [ 2.152899] usbcore: registered new interface driver usb-storage [ 2.153044] i8042: PNP: No PS/2 controller found. [ 2.153147] i8042: Probing ports directly. [ 2.156326] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.156449] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.156810] rtc_cmos 00:02: RTC can wake from S4 [ 2.157340] rtc_cmos 00:02: registered as rtc0 [ 2.157486] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 2.157643] device-mapper: uevent: version 1.0.3 [ 2.157888] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 2.158040] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 2.158237] hid: raw HID events driver (C) Jiri Kosina [ 2.158560] usbcore: registered new interface driver usbhid [ 2.158665] usbhid: USB HID core driver [ 2.159161] Initializing XFRM netlink socket [ 2.159285] NET: Registered PF_INET6 protocol family [ 2.159789] Segment Routing with IPv6 [ 2.159902] In-situ OAM (IOAM) with IPv6 [ 2.160037] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.160305] NET: Registered PF_PACKET protocol family [ 2.160435] 9pnet: Installing 9P2000 support [ 2.160560] Key type dns_resolver registered [ 2.160701] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 2.161166] IPI shorthand broadcast: enabled [ 2.165713] sched_clock: Marking stable (2142007648, 23206580)->(2171706451, -6492223) [ 2.166158] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 2.166447] registered taskstats version 1 [ 2.166549] Loading compiled-in X.509 certificates [ 2.168738] PM: Magic number: 12:912:1010 [ 2.168898] printk: legacy console [netcon0] enabled [ 2.169002] netconsole: network logging started [ 2.169205] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.179600] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.179996] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 2.180152] ALSA device list: [ 2.180281] No soundcards found. [ 2.181069] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 2.194261] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.194404] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.195026] ata2.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133 [ 2.195564] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.195863] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 2.196347] ata2.00: configured for UDMA/133 [ 2.196464] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.198223] ata1.00: configured for UDMA/133 [ 2.198497] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.199032] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.199157] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.199370] sd 0:0:0:0: [sda] Write Protect is off [ 2.199490] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.199499] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5 [ 2.199534] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.199861] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.200375] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.200418] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.200663] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 2.200847] sd 1:0:0:0: [sdb] Write Protect is off [ 2.200969] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.201021] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.201273] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 2.222313] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.226501] sda: sda1 sda2 < sda5 > [ 2.226914] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.228473] Freeing unused kernel image (initmem) memory: 2680K [ 2.228606] Write protecting the kernel read-only data: 24576k [ 2.241131] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 2.338246] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.356624] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.356774] Run /init as init process [ 2.356898] with arguments: [ 2.356900] /init [ 2.356902] placeholder [ 2.356904] with environment: [ 2.356906] HOME=/ [ 2.356907] TERM=linux [ 2.500308] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.500478] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.500601] usb 6-2: Product: Hermon USB hidmouse Device [ 2.500718] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.506755] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.507047] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.510811] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.562493] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.623106] e1000e: Intel(R) PRO/1000 Network Driver [ 2.623245] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.623468] xen: registering gsi 48 triggering 0 polarity 1 [ 2.623504] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.623816] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.667050] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.711107] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e9:2a [ 2.711294] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.711492] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.711734] xen: registering gsi 47 triggering 0 polarity 1 [ 2.711760] xen: --> pirq=47 -> irq=47 (gsi=47) [ 2.711949] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.759307] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.806099] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e9:2b [ 2.806271] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.806461] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.808858] e1000e 0000:01:00.0 enx002590aee92a: renamed from eth0 [ 2.810469] e1000e 0000:02:00.0 enx002590aee92b: renamed from eth1 [ 2.825239] random: crng init done [ 3.474304] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.484945] EXT4-fs (dm-0): mounted filesystem 43c9b61f-3ed4-4150-bc1c-f71d6619c9a9 ro with ordered data mode. Quota mode: none. [ 7.571760] EXT4-fs (dm-0): re-mounted 43c9b61f-3ed4-4150-bc1c-f71d6619c9a9 r/w. Quota mode: none. [ 8.664191] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 8.670998] EXT4-fs (sda1): mounted filesystem 3ad42b3a-ac48-4ef2-b176-368246f44deb r/w with ordered data mode. Quota mode: none. [ 8.744965] Adding 1949692k swap on /dev/mapper/pinot1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 10.254945] xenbr0: port 1(enx002590aee92a) entered blocking state [ 10.255124] xenbr0: port 1(enx002590aee92a) entered disabled state [ 10.255305] e1000e 0000:01:00.0 enx002590aee92a: entered allmulticast mode [ 10.255463] e1000e 0000:01:00.0 enx002590aee92a: entered promiscuous mode [ 13.422254] e1000e 0000:01:00.0 enx002590aee92a: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 13.422803] xenbr0: port 1(enx002590aee92a) entered blocking state [ 13.422914] xenbr0: port 1(enx002590aee92a) entered forwarding state