[ 0.000000] Linux version 6.1.96+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Fri Jun 28 21:34:31 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/fiano1--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] Xen: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] Xen: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] Xen: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] Xen: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec01fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] Hypervisor detected: Xen PV [ 0.000499] tsc: Detected 1800.000 MHz processor [ 0.001230] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001239] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001253] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.001256] Disabled [ 0.001258] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.001270] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.001347] Kernel/User page tables isolation: disabled on XEN PV. [ 0.039048] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.039076] ACPI: Early table checksum verification disabled [ 0.045653] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.045676] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.045733] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.045815] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.045841] ACPI: FACS 0x000000007E1D8080 000040 [ 0.045868] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.045895] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.045922] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.045949] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.045975] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.046002] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.046029] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.046055] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.046082] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.046108] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.046135] ACPI: RMAD 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.046162] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.046176] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.046180] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.046182] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.046183] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.046185] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.046186] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.046187] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.046189] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.046190] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.046191] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.046193] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.046194] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.046195] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.046196] ACPI: Reserving RMAD table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.046198] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.046303] Setting APIC routing to Xen PV. [ 0.054254] Zone ranges: [ 0.054267] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.054275] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.054278] Normal empty [ 0.054279] Movable zone start for each node [ 0.054280] Early memory node ranges [ 0.054281] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.054284] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.054288] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.054302] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.054418] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.058789] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.058810] p2m virtual area at (____ptrval____), size is 40000000 [ 0.374786] Remapped 102 page(s) [ 0.377498] ACPI: PM-Timer IO Port: 0x408 [ 0.377595] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.377601] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.377604] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.377606] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.377653] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.377675] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.377695] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.377701] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.377744] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.377753] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.377873] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.377902] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.377906] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.377907] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.377910] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.377919] Booting kernel on Xen [ 0.377921] Xen version: 4.19-unstable (preserve-AD) [ 0.377927] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.386165] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.386769] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u524288 [ 0.386779] pcpu-alloc: s180520 r8192 d32472 u524288 alloc=1*2097152 [ 0.386785] pcpu-alloc: [0] 0 1 2 3 [ 0.386945] xen: PV spinlocks enabled [ 0.386950] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.386960] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.386965] Kernel command line: placeholder root=/dev/mapper/fiano1--vg-root ro console=hvc0 [ 0.387040] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.387062] random: crng init done [ 0.387185] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.387245] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.388469] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.388481] software IO TLB: area num 4. [ 0.505425] Memory: 390896K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1576K init, 1296K bss, 133136K reserved, 0K cma-reserved) [ 0.505756] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.509354] Dynamic Preempt: voluntary [ 0.509498] rcu: Preemptible hierarchical RCU implementation. [ 0.509500] rcu: RCU event tracing is enabled. [ 0.509501] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.509503] Trampoline variant of Tasks RCU enabled. [ 0.509504] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.509506] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.527683] NR_IRQS: 4352, nr_irqs: 864, preallocated irqs: 16 [ 0.527884] xen:events: Using FIFO-based ABI [ 0.527924] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.527940] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.527958] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.527972] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.527986] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.528000] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.528014] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.528028] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.528042] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.528056] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.528070] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.528084] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.528098] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.528112] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.528126] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.528143] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.533077] Console: colour VGA+ 80x25 [ 0.548125] printk: console [tty0] enabled [ 0.549935] printk: console [hvc0] enabled [ 0.550077] ACPI: Core revision 20220331 [ 0.633091] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.633273] Xen: using vcpuop timer interface [ 0.633282] installing Xen timer for CPU 0 [ 0.633468] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f2297dd97, max_idle_ns: 440795236593 ns [ 0.633649] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.00 BogoMIPS (lpj=1800000) [ 0.634089] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.634228] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 0.634386] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.634661] Spectre V2 : Mitigation: Retpolines [ 0.634796] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.634960] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.635100] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.635242] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.635410] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.635549] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.635658] MDS: Mitigation: Clear CPU buffers [ 0.635798] MMIO Stale Data: Unknown: No mitigations [ 0.635964] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.636128] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.636266] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.636405] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.636545] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.660012] Freeing SMP alternatives memory: 40K [ 0.660159] pid_max: default: 32768 minimum: 301 [ 0.660314] LSM: Security Framework initializing [ 0.660482] SELinux: Initializing. [ 0.660654] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.660822] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.661611] cpu 0 spinlock event irq 49 [ 0.661662] VPMU disabled by hypervisor. [ 0.662428] cblist_init_generic: Setting adjustable number of callback queues. [ 0.662595] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.662734] Performance Events: unsupported p6 CPU model 62 no PMU driver, software events only. [ 0.662916] signal: max sigframe size: 1776 [ 0.663145] rcu: Hierarchical SRCU implementation. [ 0.663282] rcu: Max phase no-delay instances is 400. [ 0.663959] smp: Bringing up secondary CPUs ... [ 0.664499] installing Xen timer for CPU 1 [ 0.665239] cpu 1 spinlock event irq 59 [ 0.665904] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.667238] installing Xen timer for CPU 2 [ 0.667909] cpu 2 spinlock event irq 65 [ 0.668053] installing Xen timer for CPU 3 [ 0.669235] cpu 3 spinlock event irq 71 [ 0.669235] smp: Brought up 1 node, 4 CPUs [ 0.669658] smpboot: Max logical packages: 1 [ 0.669916] devtmpfs: initialized [ 0.669916] x86/mm: Memory block size: 128MB [ 0.670817] ACPI: PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 0.670897] ACPI: PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 0.671190] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.671660] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.671974] PM: RTC time: 22:08:03, date: 2024-06-28 [ 0.672249] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.672441] xen:grant_table: Grant tables using version 1 layout [ 0.672609] Grant table initialized [ 0.672840] audit: initializing netlink subsys (disabled) [ 0.673010] audit: type=2000 audit(1719612484.022:1): state=initialized audit_enabled=0 res=1 [ 0.673010] thermal_sys: Registered thermal governor 'step_wise' [ 0.673010] thermal_sys: Registered thermal governor 'user_space' [ 0.673702] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.674220] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.674397] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.910415] PCI: Using configuration type 1 for base access [ 0.913817] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.914769] ACPI: Added _OSI(Module Device) [ 0.914859] ACPI: Added _OSI(Processor Device) [ 0.914994] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.914994] ACPI: Added _OSI(Processor Aggregator Device) [ 1.094352] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.109715] xen: registering gsi 9 triggering 0 polarity 0 [ 1.114957] ACPI: Interpreter enabled [ 1.115124] ACPI: PM: (supports S0 S1 S4 S5) [ 1.115260] ACPI: Using IOAPIC for interrupt routing [ 1.115448] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.115619] PCI: Using E820 reservations for host bridge windows [ 1.116204] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.137982] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.138140] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.138445] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 1.138832] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 1.138978] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.139471] PCI host bridge to bus 0000:00 [ 1.139609] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.139657] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.139799] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.139940] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.140082] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 1.140245] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.140409] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.140594] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.140656] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.140893] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.141550] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.141974] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.142765] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.143290] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.144074] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.144640] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.145094] pci 0000:00:03.0: enabling Extended Tags [ 1.145595] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.146084] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.146361] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.147311] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.147583] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.148459] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 1.148733] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 1.149679] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 1.149952] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 1.150896] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 1.151172] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 1.152130] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 1.152402] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 1.153372] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 1.153644] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 1.154588] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 1.154787] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 1.155726] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 1.156575] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 1.157364] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 1.157598] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 1.158549] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 1.159312] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 1.159853] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 1.160128] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 1.160767] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 1.161189] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 1.161471] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 1.162111] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 1.162624] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 1.162761] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 1.163484] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 1.163940] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 1.164725] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.164996] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 1.165141] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 1.165521] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 1.166297] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.166563] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 1.166666] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 1.167132] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 1.167378] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 1.168105] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.168548] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 1.169322] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 1.170371] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 1.170614] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 1.170710] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 1.170908] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 1.171103] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 1.171294] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 1.171484] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 1.171955] pci 0000:00:1f.2: PME# supported from D3hot [ 1.172394] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 1.172672] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 1.172976] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 1.173456] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 1.173737] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 1.174691] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.175124] pci 0000:00:01.1: PCI bridge to [bus 02] [ 1.175553] pci 0000:00:03.0: PCI bridge to [bus 03] [ 1.176030] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 1.176308] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 1.176563] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 1.176713] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 1.177010] pci 0000:04:00.0: enabling Extended Tags [ 1.177599] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 1.177656] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 1.178529] pci 0000:00:11.0: PCI bridge to [bus 04] [ 1.178674] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 1.178863] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 1.179368] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 1.179632] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 1.179786] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 1.179989] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 1.180732] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 1.181376] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 1.181531] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 1.181673] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 1.182182] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 1.182445] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 1.182722] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 1.182928] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 1.183665] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 1.184306] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 1.184461] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 1.184616] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 1.184816] pci_bus 0000:07: extended config space not accessible [ 1.185034] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 1.185278] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 1.185475] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 1.185703] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 1.186120] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.186813] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 1.186992] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 1.187164] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 1.187329] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 1.187656] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 1.187825] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 1.187992] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 1.188159] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 1.188329] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 1.188498] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 1.188655] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 1.189150] pci_bus 0000:00: on NUMA node 0 [ 1.189298] xen: registering gsi 13 triggering 1 polarity 0 [ 1.190072] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 1.190224] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.190413] acpi PNP0A03:00: _OSC: OS now controls [PME PCIeCapability LTR] [ 1.190557] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.190737] PCI host bridge to bus 0000:ff [ 1.190874] pci_bus 0000:ff: root bus resource [bus ff] [ 1.191117] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 1.191791] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 1.192446] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 1.193056] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 1.193657] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 1.194263] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 1.194898] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 1.195505] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 1.196130] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 1.196732] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 1.197369] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 1.197969] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 1.198614] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 1.199117] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 1.199810] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 1.200595] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 1.201300] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 1.202089] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 1.202879] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 1.203665] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 1.204473] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 1.205270] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 1.206065] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 1.206849] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 1.207629] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 1.208300] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 1.209088] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 1.209878] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 1.210655] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 1.211252] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 1.211871] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 1.212464] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 1.213093] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 1.213689] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 1.214290] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 1.214964] pci_bus 0000:ff: on NUMA node 0 [ 1.215154] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 1.215404] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 1.215684] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 1.215932] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 1.216178] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 1.216422] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 1.216672] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 1.216926] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 1.218929] xen:balloon: Initialising balloon driver [ 1.219101] iommu: Default domain type: Translated [ 1.219101] iommu: DMA domain TLB invalidation policy: lazy mode [ 1.219746] SCSI subsystem initialized [ 1.219907] libata version 3.00 loaded. [ 1.219907] ACPI: bus type USB registered [ 1.219907] usbcore: registered new interface driver usbfs [ 1.220024] usbcore: registered new interface driver hub [ 1.220171] usbcore: registered new device driver usb [ 1.220681] pps_core: LinuxPPS API ver. 1 registered [ 1.220821] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.221007] PTP clock support registered [ 1.221179] Advanced Linux Sound Architecture Driver Initialized. [ 1.221702] NetLabel: Initializing [ 1.221836] NetLabel: domain hash size = 128 [ 1.221970] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.222131] NetLabel: unlabeled traffic allowed by default [ 1.222312] PCI: Using ACPI for IRQ routing [ 1.281654] PCI: pci_cache_line_size set to 64 bytes [ 1.282672] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 1.282677] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 1.282716] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 1.282838] pci 0000:07:01.0: vgaarb: bridge control possible [ 1.282976] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.283150] vgaarb: loaded [ 1.285398] clocksource: Switched to clocksource tsc-early [ 1.285646] VFS: Disk quotas dquot_6.6.0 [ 1.285646] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.285646] hugetlbfs: disabling because there are no supported hugepage sizes [ 1.285646] pnp: PnP ACPI init [ 1.285670] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 1.285822] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 1.285927] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 1.285927] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 1.285927] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 1.285927] xen: registering gsi 8 triggering 1 polarity 0 [ 1.286742] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 1.286890] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 1.287204] xen: registering gsi 12 triggering 1 polarity 0 [ 1.287444] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 1.287948] xen: registering gsi 4 triggering 1 polarity 0 [ 1.287954] Already setup the GSI :4 [ 1.288088] pnp 00:07: [dma 0 disabled] [ 1.288464] xen: registering gsi 3 triggering 1 polarity 0 [ 1.288481] pnp 00:08: [dma 0 disabled] [ 1.288967] system 00:09: [io 0x0400-0x0453] has been reserved [ 1.289114] system 00:09: [io 0x0458-0x047f] has been reserved [ 1.289254] system 00:09: [io 0x1180-0x119f] has been reserved [ 1.289394] system 00:09: [io 0x0500-0x057f] has been reserved [ 1.289534] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.289697] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 1.289840] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 1.290104] system 00:0a: [io 0x0454-0x0457] has been reserved [ 1.290643] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 1.291069] pnp: PnP ACPI: found 12 devices [ 1.339945] PM-Timer failed consistency check (0xffffff) - aborting. [ 1.340135] NET: Registered PF_INET protocol family [ 1.340343] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.340838] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.341013] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.341180] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 1.341359] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.341556] TCP: Hash tables configured (established 4096 bind 4096) [ 1.341793] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.341989] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.342174] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.342730] RPC: Registered named UNIX socket transport module. [ 1.342882] RPC: Registered udp transport module. [ 1.343016] RPC: Registered tcp transport module. [ 1.343150] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.343784] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.343996] pci 0000:00:01.1: PCI bridge to [bus 02] [ 1.344204] pci 0000:00:03.0: PCI bridge to [bus 03] [ 1.344409] pci 0000:00:11.0: PCI bridge to [bus 04] [ 1.344553] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 1.344755] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 1.344953] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 1.345097] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 1.345260] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 1.345450] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 1.345608] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 1.345790] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 1.345980] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 1.346139] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 1.346295] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 1.346491] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 1.346632] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 1.346790] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 1.346935] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 1.347075] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 1.347216] pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window] [ 1.347357] pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 1.347498] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfbffffff window] [ 1.347640] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 1.347794] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 1.347957] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 1.348093] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 1.348237] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 1.348378] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 1.348517] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 1.348674] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 1.348839] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 1.348979] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 1.349118] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 1.349258] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 1.349397] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 1.349538] pci_bus 0000:07: resource 9 [mem 0xfed08000-0xfed08fff window] [ 1.349699] pci_bus 0000:07: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 1.349842] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfbffffff window] [ 1.350173] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 1.350477] xen: registering gsi 16 triggering 0 polarity 1 [ 1.350517] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.366868] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 16100 usecs [ 1.372611] xen: registering gsi 23 triggering 0 polarity 1 [ 1.372645] xen: --> pirq=23 -> irq=23 (gsi=23) [ 1.389871] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 16932 usecs [ 1.390464] PCI: CLS 64 bytes, default 64 [ 1.390679] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.390758] Unpacking initramfs... [ 1.390820] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 1.391241] kvm: no hardware support for 'kvm_intel' [ 1.391381] has_svm: not amd or hygon [ 1.391510] kvm: no hardware support for 'kvm_amd' [ 1.391670] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f2297dd97, max_idle_ns: 440795236593 ns [ 1.391919] clocksource: Switched to clocksource tsc [ 1.394008] Initialise system trusted keyrings [ 1.394349] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.396274] NFS: Registering the id_resolver key type [ 1.396424] Key type id_resolver registered [ 1.396575] Key type id_legacy registered [ 1.396809] 9p: Installing v9fs 9p2000 file system support [ 1.414471] Key type asymmetric registered [ 1.414635] Asymmetric key parser 'x509' registered [ 1.414808] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.414986] io scheduler mq-deadline registered [ 1.415122] io scheduler kyber registered [ 1.415989] xen: registering gsi 26 triggering 0 polarity 1 [ 1.416031] xen: --> pirq=26 -> irq=26 (gsi=26) [ 1.416834] xen: registering gsi 26 triggering 0 polarity 1 [ 1.416842] Already setup the GSI :26 [ 1.417708] xen: registering gsi 40 triggering 0 polarity 1 [ 1.417738] xen: --> pirq=40 -> irq=40 (gsi=40) [ 1.418446] xen: registering gsi 16 triggering 0 polarity 1 [ 1.418455] Already setup the GSI :16 [ 1.418961] xen: registering gsi 17 triggering 0 polarity 1 [ 1.418988] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.419347] xen: registering gsi 16 triggering 0 polarity 1 [ 1.419355] Already setup the GSI :16 [ 1.420038] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.420284] ACPI: button: Power Button [PWRB] [ 1.420480] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.420729] ACPI: button: Power Button [PWRF] [ 1.421088] Monitor-Mwait will be used to enter C-1 state [ 1.421112] Monitor-Mwait will be used to enter C-2 state [ 1.421125] ACPI: \_SB_.SCK0.C000: Found 2 idle states [ 1.422883] ACPI: \_SB_.SCK0.C002: Found 2 idle states [ 1.424619] ACPI: \_SB_.SCK0.C004: Found 2 idle states [ 1.426628] ACPI: \_SB_.SCK0.C006: Found 2 idle states [ 1.429053] xen:xen_evtchn: Event-channel device installed [ 1.429360] xen_pciback: backend is vpci [ 1.430544] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.431038] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.432074] hpet_acpi_add: no address or irqs in _CRS [ 1.432321] Non-volatile memory driver v1.3 [ 1.432457] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 1.435560] loop: module loaded [ 1.443684] ahci 0000:00:1f.2: version 3.0 [ 1.443827] xen: registering gsi 18 triggering 0 polarity 1 [ 1.443869] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.454270] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 1.454451] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 1.470419] scsi host0: ahci [ 1.470981] scsi host1: ahci [ 1.471454] scsi host2: ahci [ 1.471963] scsi host3: ahci [ 1.472530] scsi host4: ahci [ 1.473021] scsi host5: ahci [ 1.473209] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 75 [ 1.473377] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 75 [ 1.473610] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 75 [ 1.473776] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 75 [ 1.473939] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 75 [ 1.474103] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 75 [ 1.474701] tun: Universal TUN/TAP device driver, 1.6 [ 1.475027] e100: Intel(R) PRO/100 Network Driver [ 1.475172] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.475341] sky2: driver version 1.30 [ 1.475627] xen_netfront: Initialising Xen virtual ethernet driver [ 1.476119] xen: registering gsi 16 triggering 0 polarity 1 [ 1.476131] Already setup the GSI :16 [ 1.476390] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.476659] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.476873] ehci-pci 0000:00:1a.0: debug port 2 [ 1.481040] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 1.487544] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.487867] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.488036] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.488199] usb usb1: Product: EHCI Host Controller [ 1.488334] usb usb1: Manufacturer: Linux 6.1.96+ ehci_hcd [ 1.488470] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.488878] hub 1-0:1.0: USB hub found [ 1.489040] hub 1-0:1.0: 2 ports detected [ 1.489597] xen: registering gsi 23 triggering 0 polarity 1 [ 1.489608] Already setup the GSI :23 [ 1.489846] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.490093] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.490312] ehci-pci 0000:00:1d.0: debug port 2 [ 1.494539] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 1.501570] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.501899] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.502068] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.502232] usb usb2: Product: EHCI Host Controller [ 1.502367] usb usb2: Manufacturer: Linux 6.1.96+ ehci_hcd [ 1.502534] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.502969] hub 2-0:1.0: USB hub found [ 1.503128] hub 2-0:1.0: 2 ports detected [ 1.503686] usbcore: registered new interface driver usblp [ 1.503847] usbcore: registered new interface driver usb-storage [ 1.504040] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 1.504189] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 1.507610] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.507755] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.508367] rtc_cmos 00:02: RTC can wake from S4 [ 1.509267] rtc_cmos 00:02: registered as rtc0 [ 1.509472] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 1.509749] device-mapper: uevent: version 1.0.3 [ 1.509976] xen: registering gsi 18 triggering 0 polarity 1 [ 1.509992] Already setup the GSI :18 [ 1.509998] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 1.510174] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.510305] intel_pstate: CPU model not supported [ 1.510369] i2c i2c-0: 1/6 memory slots populated (from DMI) [ 1.510476] hid: raw HID events driver (C) Jiri Kosina [ 1.510620] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 1.510805] usbcore: registered new interface driver usbhid [ 1.511191] usbhid: USB HID core driver [ 1.511978] Initializing XFRM netlink socket [ 1.512283] NET: Registered PF_INET6 protocol family [ 1.512999] Segment Routing with IPv6 [ 1.513144] In-situ OAM (IOAM) with IPv6 [ 1.513324] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.513660] NET: Registered PF_PACKET protocol family [ 1.513860] 9pnet: Installing 9P2000 support [ 1.514014] Key type dns_resolver registered [ 1.514974] IPI shorthand broadcast: enabled [ 1.515146] sched_clock: Marking stable (1409357974, 105499379)->(1693539330, -178681977) [ 1.515873] registered taskstats version 1 [ 1.516010] Loading compiled-in X.509 certificates [ 1.520113] PM: Magic number: 12:504:149 [ 1.520263] ata_port ata6: hash matches [ 1.520394] ata6: hash matches [ 1.520659] printk: console [netcon0] enabled [ 1.520803] netconsole: network logging started [ 1.521186] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.538466] Freeing initrd memory: 19884K [ 1.558606] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.559077] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 1.559560] ALSA device list: [ 1.559715] No soundcards found. [ 1.560047] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 1.731611] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.739599] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.784699] ata4: SATA link down (SStatus 0 SControl 300) [ 1.784871] ata6: SATA link down (SStatus 0 SControl 300) [ 1.785039] ata3: SATA link down (SStatus 0 SControl 300) [ 1.785205] ata2: SATA link down (SStatus 0 SControl 300) [ 1.785374] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.785566] ata5: SATA link down (SStatus 0 SControl 300) [ 1.786435] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 1.787049] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.788165] ata1.00: configured for UDMA/133 [ 1.788652] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 1.790162] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.790307] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.790558] sd 0:0:0:0: [sda] Write Protect is off [ 1.790701] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.790819] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.791169] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.817172] sda: sda1 sda2 < sda5 > [ 1.817758] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.819618] Freeing unused kernel image (initmem) memory: 1576K [ 1.819771] Write protecting the kernel read-only data: 22528k [ 1.859283] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.861261] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.871013] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.871191] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.871436] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.871632] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.872065] hub 1-1:1.0: USB hub found [ 1.872266] hub 2-1:1.0: USB hub found [ 1.872418] hub 1-1:1.0: 6 ports detected [ 1.872587] hub 2-1:1.0: 8 ports detected [ 2.145565] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 2.225557] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.225738] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.225903] usb 1-1.1: Product: Hermon USB hidmouse Device [ 2.226040] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 2.227815] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input5 [ 2.228277] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 2.229651] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input6 [ 2.281897] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 2.623548] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.623793] Run /init as init process [ 2.623936] with arguments: [ 2.623937] /init [ 2.623939] placeholder [ 2.623940] with environment: [ 2.623942] HOME=/ [ 2.623943] TERM=linux [ 3.334310] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 3.334542] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 3.334778] isci 0000:04:00.0: OEM SAS parameters (version: 1.3) loaded (firmware) [ 3.335098] xen: registering gsi 16 triggering 0 polarity 1 [ 3.335109] Already setup the GSI :16 [ 3.335543] e1000e: Intel(R) PRO/1000 Network Driver [ 3.335692] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.339926] xen: registering gsi 16 triggering 0 polarity 1 [ 3.339937] Already setup the GSI :16 [ 3.340485] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.348881] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 3.351695] scsi host6: isci [ 3.386182] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 3.429660] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a6 [ 3.429839] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.430071] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 3.430392] xen: registering gsi 17 triggering 0 polarity 1 [ 3.430404] Already setup the GSI :17 [ 3.430975] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.478839] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 3.524735] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a7 [ 3.524914] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 3.525148] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 3.529144] e1000e 0000:05:00.0 enx002590eb25a6: renamed from eth0 [ 3.538202] e1000e 0000:06:00.0 enx002590eb25a7: renamed from eth1 [ 4.287532] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 4.293979] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 9.301259] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 10.961021] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 11.000818] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 11.182741] Adding 1949692k swap on /dev/mapper/fiano1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 12.970784] xenbr0: port 1(enx002590eb25a6) entered blocking state [ 12.970961] xenbr0: port 1(enx002590eb25a6) entered disabled state [ 12.971234] device enx002590eb25a6 entered promiscuous mode [ 16.051597] e1000e 0000:05:00.0 enx002590eb25a6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 16.052133] IPv6: ADDRCONF(NETDEV_CHANGE): enx002590eb25a6: link becomes ready [ 16.052338] xenbr0: port 1(enx002590eb25a6) entered blocking state [ 16.052482] xenbr0: port 1(enx002590eb25a6) entered forwarding state [ 16.052753] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready