[ 0.000000] Linux version 6.10.0-rc5+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Sat Jun 29 17:07:50 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina1--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] DMI: Memory slots populated: 1/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000029] Xen PV: Detected 8 vCPUS [ 0.000487] tsc: Detected 2199.996 MHz processor [ 0.000922] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000926] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000933] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000935] MTRR map: 2 entries (0 fixed + 2 variable; max 20), built from 10 variable MTRRs [ 0.000937] MTRRs set to read-only [ 0.000941] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000982] Kernel/User page tables isolation: disabled on XEN PV. [ 0.026369] RAMDISK: [mem 0x04000000-0x0545bfff] [ 0.026377] ACPI: Early table checksum verification disabled [ 0.026978] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.026990] ACPI: XSDT 0x00000000799FF0A0 0000BC (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027027] ACPI: FACP 0x0000000079A17AC8 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027076] ACPI: DSDT 0x00000000799FF1F0 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.027092] ACPI: FACS 0x0000000079E59F80 000040 [ 0.027108] ACPI: APIC 0x0000000079A17BD8 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027124] ACPI: FPDT 0x0000000079A17C98 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027141] ACPI: FIDT 0x0000000079A17CE0 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027156] ACPI: SPMI 0x0000000079A17D80 000040 (v05 SUPERM SMCI--MB 00000000 AMI. 00000000) [ 0.027172] ACPI: MCFG 0x0000000079A17DC0 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.027188] ACPI: UEFI 0x0000000079A17E00 000042 (v01 00000000 00000000) [ 0.027205] ACPI: DBG2 0x0000000079A17E48 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.027221] ACPI: HPET 0x0000000079A17EC0 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.027237] ACPI: WDDT 0x0000000079A17EF8 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.027253] ACPI: SSDT 0x0000000079A17F38 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.027269] ACPI: SSDT 0x0000000079A26CC8 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.027285] ACPI: SSDT 0x0000000079A28F50 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.027301] ACPI: PRAD 0x0000000079A28FB8 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.027317] ACPI: RMAD 0x0000000079A290C0 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.027333] ACPI: HEST 0x0000000079A29190 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027349] ACPI: BERT 0x0000000079A29238 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027365] ACPI: ERST 0x0000000079A29268 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027381] ACPI: EINJ 0x0000000079A29498 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027389] ACPI: Reserving FACP table memory at [mem 0x79a17ac8-0x79a17bd3] [ 0.027391] ACPI: Reserving DSDT table memory at [mem 0x799ff1f0-0x79a17ac4] [ 0.027392] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.027393] ACPI: Reserving APIC table memory at [mem 0x79a17bd8-0x79a17c93] [ 0.027394] ACPI: Reserving FPDT table memory at [mem 0x79a17c98-0x79a17cdb] [ 0.027395] ACPI: Reserving FIDT table memory at [mem 0x79a17ce0-0x79a17d7b] [ 0.027396] ACPI: Reserving SPMI table memory at [mem 0x79a17d80-0x79a17dbf] [ 0.027397] ACPI: Reserving MCFG table memory at [mem 0x79a17dc0-0x79a17dfb] [ 0.027398] ACPI: Reserving UEFI table memory at [mem 0x79a17e00-0x79a17e41] [ 0.027399] ACPI: Reserving DBG2 table memory at [mem 0x79a17e48-0x79a17eb9] [ 0.027400] ACPI: Reserving HPET table memory at [mem 0x79a17ec0-0x79a17ef7] [ 0.027401] ACPI: Reserving WDDT table memory at [mem 0x79a17ef8-0x79a17f37] [ 0.027402] ACPI: Reserving SSDT table memory at [mem 0x79a17f38-0x79a26cc2] [ 0.027403] ACPI: Reserving SSDT table memory at [mem 0x79a26cc8-0x79a28f4c] [ 0.027403] ACPI: Reserving SSDT table memory at [mem 0x79a28f50-0x79a28fb3] [ 0.027404] ACPI: Reserving PRAD table memory at [mem 0x79a28fb8-0x79a290b9] [ 0.027405] ACPI: Reserving RMAD table memory at [mem 0x79a290c0-0x79a2918b] [ 0.027406] ACPI: Reserving HEST table memory at [mem 0x79a29190-0x79a29237] [ 0.027407] ACPI: Reserving BERT table memory at [mem 0x79a29238-0x79a29267] [ 0.027408] ACPI: Reserving ERST table memory at [mem 0x79a29268-0x79a29497] [ 0.027409] ACPI: Reserving EINJ table memory at [mem 0x79a29498-0x79a295c7] [ 0.027516] APIC: Switched APIC routing to: Xen PV [ 0.031601] Zone ranges: [ 0.031602] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.031605] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.031607] Normal empty [ 0.031608] Movable zone start for each node [ 0.031609] Early memory node ranges [ 0.031609] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.031611] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.031613] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.031619] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.031657] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.033149] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.033154] p2m virtual area at (____ptrval____), size is 40000000 [ 0.159718] Remapped 102 page(s) [ 0.161098] ACPI: PM-Timer IO Port: 0x408 [ 0.161168] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.161171] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.161173] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.161175] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.161176] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.161178] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.161179] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.161181] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.161211] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.161225] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.161228] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.161256] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.161260] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.161273] CPU topo: Max. logical packages: 1 [ 0.161274] CPU topo: Max. logical dies: 1 [ 0.161275] CPU topo: Max. dies per package: 1 [ 0.161281] CPU topo: Max. threads per core: 2 [ 0.161282] CPU topo: Num. cores per package: 4 [ 0.161283] CPU topo: Num. threads per package: 8 [ 0.161284] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs [ 0.161297] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.161300] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.161301] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.161303] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.161308] Booting kernel on Xen [ 0.161308] Xen version: 4.19-unstable (preserve-AD) [ 0.161312] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.168319] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.168802] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u262144 [ 0.168809] pcpu-alloc: s194408 r8192 d30872 u262144 alloc=1*2097152 [ 0.168812] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.168883] xen: PV spinlocks enabled [ 0.168886] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.168889] Kernel command line: placeholder root=/dev/mapper/debina1--vg-root ro console=hvc0 [ 0.168927] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.168938] random: crng init done [ 0.169007] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.169045] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.170364] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.170368] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.170370] software IO TLB: area num 8. [ 0.233648] Memory: 384876K/524284K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 139156K reserved, 0K cma-reserved) [ 0.233810] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.236418] Dynamic Preempt: voluntary [ 0.236668] rcu: Preemptible hierarchical RCU implementation. [ 0.236669] rcu: RCU event tracing is enabled. [ 0.236670] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.236671] Trampoline variant of Tasks RCU enabled. [ 0.236672] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.236673] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.236708] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.248406] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.248567] xen:events: Using FIFO-based ABI [ 0.248593] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.248602] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.248610] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.248617] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.248625] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.248633] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.248641] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.248648] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.248656] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.248663] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.248671] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.248678] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.248686] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.248695] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.248703] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.248712] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.254085] Console: colour VGA+ 80x25 [ 0.254089] printk: legacy console [tty0] enabled [ 0.273690] printk: legacy console [hvc0] enabled [ 0.275087] ACPI: Core revision 20240322 [ 0.289100] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.289279] Xen: using vcpuop timer interface [ 0.289287] installing Xen timer for CPU 0 [ 0.289446] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.289606] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199996) [ 0.289938] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.290056] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.290184] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.290333] Spectre V2 : Mitigation: Retpolines [ 0.290613] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.290792] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.290912] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.291033] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.291182] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.291300] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.291614] MDS: Mitigation: Clear CPU buffers [ 0.291728] TAA: Mitigation: Clear CPU buffers [ 0.291841] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.292007] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.292153] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.292272] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.292392] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.292519] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.315099] Freeing SMP alternatives memory: 40K [ 0.315230] pid_max: default: 32768 minimum: 301 [ 0.315367] LSM: initializing lsm=capability,selinux [ 0.315489] SELinux: Initializing. [ 0.315630] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.315778] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.316693] cpu 0 spinlock event irq 25 [ 0.316812] VPMU disabled by hypervisor. [ 0.317387] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.317542] signal: max sigframe size: 1776 [ 0.317680] rcu: Hierarchical SRCU implementation. [ 0.317796] rcu: Max phase no-delay instances is 400. [ 0.318411] smp: Bringing up secondary CPUs ... [ 0.318772] installing Xen timer for CPU 1 [ 0.319234] installing Xen timer for CPU 2 [ 0.319675] installing Xen timer for CPU 3 [ 0.041888] [Firmware Bug]: CPU 1: APIC ID mismatch. Firmware: 0x0002 APIC: 0x0001 [ 0.319909] cpu 1 spinlock event irq 45 [ 0.320749] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.320921] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.321110] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.041888] [Firmware Bug]: CPU 2: APIC ID mismatch. Firmware: 0x0004 APIC: 0x0002 [ 0.321653] cpu 2 spinlock event irq 46 [ 0.041888] [Firmware Bug]: CPU 3: APIC ID mismatch. Firmware: 0x0006 APIC: 0x0003 [ 0.321918] cpu 3 spinlock event irq 47 [ 0.322837] installing Xen timer for CPU 4 [ 0.323300] installing Xen timer for CPU 5 [ 0.323849] installing Xen timer for CPU 6 [ 0.324267] installing Xen timer for CPU 7 [ 0.041888] [Firmware Bug]: CPU 4: APIC ID mismatch. Firmware: 0x0001 APIC: 0x0004 [ 0.324650] cpu 4 spinlock event irq 68 [ 0.041888] [Firmware Bug]: CPU 5: APIC ID mismatch. Firmware: 0x0003 APIC: 0x0005 [ 0.324912] cpu 5 spinlock event irq 69 [ 0.041888] [Firmware Bug]: CPU 6: APIC ID mismatch. Firmware: 0x0005 APIC: 0x0006 [ 0.325653] cpu 6 spinlock event irq 70 [ 0.325917] cpu 7 spinlock event irq 71 [ 0.326801] smp: Brought up 1 node, 8 CPUs [ 0.327040] devtmpfs: initialized [ 0.327040] x86/mm: Memory block size: 128MB [ 0.327939] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.327939] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.328022] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.328612] PM: RTC time: 18:27:14, date: 2024-06-29 [ 0.328851] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.328993] xen:grant_table: Grant tables using version 1 layout [ 0.329137] Grant table initialized [ 0.329477] audit: initializing netlink subsys (disabled) [ 0.329623] audit: type=2000 audit(1719685634.672:1): state=initialized audit_enabled=0 res=1 [ 0.329683] thermal_sys: Registered thermal governor 'step_wise' [ 0.329683] thermal_sys: Registered thermal governor 'user_space' [ 0.329830] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.330632] PCI: ECAM [mem 0x80000000-0x8fffffff] (base 0x80000000) for domain 0000 [bus 00-ff] [ 0.463856] PCI: Using configuration type 1 for base access [ 0.464041] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.464669] ACPI: Added _OSI(Module Device) [ 0.464801] ACPI: Added _OSI(Processor Device) [ 0.464915] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.465029] ACPI: Added _OSI(Processor Aggregator Device) [ 0.494656] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.496756] xen: registering gsi 9 triggering 0 polarity 0 [ 0.499890] ACPI: Dynamic OEM Table Load: [ 0.502903] ACPI: _OSC evaluated successfully for all CPUs [ 0.503227] ACPI: Interpreter enabled [ 0.503353] ACPI: PM: (supports S0 S4 S5) [ 0.503464] ACPI: Using IOAPIC for interrupt routing [ 0.503641] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.503792] PCI: Using E820 reservations for host bridge windows [ 0.504369] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.529974] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.530103] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.530338] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.530596] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.530722] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.530899] PCI host bridge to bus 0000:ff [ 0.531012] pci_bus 0000:ff: root bus resource [bus ff] [ 0.531238] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 conventional PCI endpoint [ 0.531726] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 conventional PCI endpoint [ 0.532188] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 conventional PCI endpoint [ 0.532678] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 conventional PCI endpoint [ 0.533153] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 conventional PCI endpoint [ 0.533610] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 conventional PCI endpoint [ 0.534096] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 conventional PCI endpoint [ 0.534552] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 conventional PCI endpoint [ 0.534946] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 conventional PCI endpoint [ 0.535444] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 conventional PCI endpoint [ 0.535903] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 conventional PCI endpoint [ 0.536360] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 conventional PCI endpoint [ 0.536857] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 conventional PCI endpoint [ 0.537314] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 conventional PCI endpoint [ 0.537789] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 conventional PCI endpoint [ 0.538273] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 conventional PCI endpoint [ 0.538731] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 conventional PCI endpoint [ 0.539193] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 conventional PCI endpoint [ 0.539503] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 conventional PCI endpoint [ 0.539961] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 conventional PCI endpoint [ 0.540468] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 conventional PCI endpoint [ 0.540964] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 conventional PCI endpoint [ 0.541465] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 conventional PCI endpoint [ 0.541977] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 conventional PCI endpoint [ 0.542477] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 conventional PCI endpoint [ 0.542956] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 conventional PCI endpoint [ 0.543442] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 conventional PCI endpoint [ 0.543914] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 conventional PCI endpoint [ 0.544415] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 conventional PCI endpoint [ 0.544946] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 conventional PCI endpoint [ 0.545447] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 conventional PCI endpoint [ 0.545944] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 conventional PCI endpoint [ 0.546425] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 conventional PCI endpoint [ 0.546886] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 conventional PCI endpoint [ 0.547345] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 conventional PCI endpoint [ 0.547848] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 conventional PCI endpoint [ 0.548964] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 conventional PCI endpoint [ 0.549470] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 conventional PCI endpoint [ 0.549992] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 conventional PCI endpoint [ 0.550542] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 conventional PCI endpoint [ 0.550920] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 conventional PCI endpoint [ 0.551410] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 conventional PCI endpoint [ 0.551873] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 conventional PCI endpoint [ 0.552155] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 conventional PCI endpoint [ 0.552654] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 conventional PCI endpoint [ 0.553120] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 conventional PCI endpoint [ 0.553581] pci_bus 0000:ff: on NUMA node 0 [ 0.557907] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.558035] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.558309] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.558650] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.558771] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.559269] PCI host bridge to bus 0000:00 [ 0.559384] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.559505] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.559610] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.559756] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.559901] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.560086] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 PCIe Root Port [ 0.560801] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 PCIe Root Port [ 0.561103] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.561518] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.561872] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 PCIe Root Port [ 0.562206] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.562624] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.563029] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 PCIe Root Port [ 0.563357] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.563495] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.563882] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.564253] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 PCIe Root Port [ 0.564553] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.564633] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.564798] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.565172] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.565563] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 PCIe Root Port [ 0.565763] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.566206] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.566586] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 PCIe Root Port [ 0.566763] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.567204] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.567585] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint [ 0.568071] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint [ 0.568772] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint [ 0.569477] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 conventional PCI endpoint [ 0.569735] pci 0000:00:14.0: BAR 0 [mem 0xfb600000-0xfb60ffff 64bit] [ 0.570198] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.570550] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 conventional PCI endpoint [ 0.570708] pci 0000:00:16.0: BAR 0 [mem 0xfb617000-0xfb61700f 64bit] [ 0.571199] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.571509] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 conventional PCI endpoint [ 0.571708] pci 0000:00:16.1: BAR 0 [mem 0xfb616000-0xfb61600f 64bit] [ 0.572172] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.572567] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 conventional PCI endpoint [ 0.572687] pci 0000:00:1a.0: BAR 0 [mem 0xfb614000-0xfb6143ff] [ 0.573223] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.573563] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 PCIe Root Port [ 0.573771] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.573902] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.574031] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.574448] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.574651] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.574774] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.575108] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 PCIe Root Port [ 0.575417] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.575547] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.575620] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.576045] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.576274] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.576396] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.576707] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 PCIe Root Port [ 0.577015] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.577146] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.577275] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.577729] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.577931] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.578053] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.578352] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 PCIe Root Port [ 0.578663] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.578793] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.578953] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.579377] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.579574] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.579617] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.579949] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 conventional PCI endpoint [ 0.580196] pci 0000:00:1d.0: BAR 0 [mem 0xfb613000-0xfb6133ff] [ 0.580739] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.581069] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 conventional PCI endpoint [ 0.581893] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 conventional PCI endpoint [ 0.582117] pci 0000:00:1f.2: BAR 0 [io 0xf070-0xf077] [ 0.582274] pci 0000:00:1f.2: BAR 1 [io 0xf060-0xf063] [ 0.582431] pci 0000:00:1f.2: BAR 2 [io 0xf050-0xf057] [ 0.582588] pci 0000:00:1f.2: BAR 3 [io 0xf040-0xf043] [ 0.582651] pci 0000:00:1f.2: BAR 4 [io 0xf020-0xf03f] [ 0.582815] pci 0000:00:1f.2: BAR 5 [mem 0xfb612000-0xfb6127ff] [ 0.583155] pci 0000:00:1f.2: PME# supported from D3hot [ 0.583446] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 conventional PCI endpoint [ 0.583695] pci 0000:00:1f.3: BAR 0 [mem 0xfb611000-0xfb6110ff 64bit] [ 0.583940] pci 0000:00:1f.3: BAR 4 [io 0xf000-0xf01f] [ 0.584345] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 conventional PCI endpoint [ 0.584594] pci 0000:00:1f.6: BAR 0 [mem 0xfb610000-0xfb610fff 64bit] [ 0.585211] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.585543] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.585841] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 PCIe Endpoint [ 0.586080] pci 0000:03:00.0: BAR 0 [mem 0xfb506000-0xfb507fff 64bit] [ 0.586868] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 PCIe Endpoint [ 0.587109] pci 0000:03:00.1: BAR 0 [mem 0xfb504000-0xfb505fff 64bit] [ 0.587840] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 PCIe Endpoint [ 0.588080] pci 0000:03:00.2: BAR 0 [mem 0xfb502000-0xfb503fff 64bit] [ 0.588835] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 PCIe Endpoint [ 0.589075] pci 0000:03:00.3: BAR 0 [mem 0xfb500000-0xfb501fff 64bit] [ 0.589812] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.590182] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 PCIe Endpoint [ 0.590421] pci 0000:04:00.0: BAR 0 [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.590686] pci 0000:04:00.0: BAR 4 [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.590848] pci 0000:04:00.0: ROM [mem 0xfb480000-0xfb4fffff pref] [ 0.591225] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.591447] pci 0000:04:00.0: VF BAR 0 [mem 0x00000000-0x00003fff 64bit] [ 0.591568] pci 0000:04:00.0: VF BAR 0 [mem 0x00000000-0x000fffff 64bit]: contains BAR 0 for 64 VFs [ 0.591660] pci 0000:04:00.0: VF BAR 3 [mem 0x00000000-0x00003fff 64bit] [ 0.591781] pci 0000:04:00.0: VF BAR 3 [mem 0x00000000-0x000fffff 64bit]: contains BAR 3 for 64 VFs [ 0.592391] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 PCIe Endpoint [ 0.592634] pci 0000:04:00.1: BAR 0 [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.592896] pci 0000:04:00.1: BAR 4 [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.593057] pci 0000:04:00.1: ROM [mem 0xfb400000-0xfb47ffff pref] [ 0.593407] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.593637] pci 0000:04:00.1: VF BAR 0 [mem 0x00000000-0x00003fff 64bit] [ 0.593758] pci 0000:04:00.1: VF BAR 0 [mem 0x00000000-0x000fffff 64bit]: contains BAR 0 for 64 VFs [ 0.593959] pci 0000:04:00.1: VF BAR 3 [mem 0x00000000-0x00003fff 64bit] [ 0.594080] pci 0000:04:00.1: VF BAR 3 [mem 0x00000000-0x000fffff 64bit]: contains BAR 3 for 64 VFs [ 0.595022] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.595327] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.595652] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.596030] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.596151] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 PCIe Endpoint [ 0.596384] pci 0000:07:00.0: BAR 0 [mem 0xfb300000-0xfb37ffff] [ 0.596604] pci 0000:07:00.0: BAR 2 [io 0xe000-0xe01f] [ 0.596773] pci 0000:07:00.0: BAR 3 [mem 0xfb380000-0xfb383fff] [ 0.597338] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.597814] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.598197] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.598324] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 PCIe Endpoint [ 0.598585] pci 0000:08:00.0: BAR 0 [mem 0xfb200000-0xfb27ffff] [ 0.598707] pci 0000:08:00.0: BAR 2 [io 0xd000-0xd01f] [ 0.598872] pci 0000:08:00.0: BAR 3 [mem 0xfb280000-0xfb283fff] [ 0.599407] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.599898] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.600267] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 PCIe to PCI/PCI-X bridge [ 0.600592] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.600638] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.600768] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.601041] pci 0000:09:00.0: enabling Extended Tags [ 0.601383] pci 0000:09:00.0: supports D1 D2 [ 0.601497] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.601855] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.602174] pci_bus 0000:0a: extended config space not accessible [ 0.602374] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 conventional PCI endpoint [ 0.602609] pci 0000:0a:00.0: BAR 0 [mem 0xfa000000-0xfaffffff] [ 0.602777] pci 0000:0a:00.0: BAR 1 [mem 0xfb000000-0xfb01ffff] [ 0.602944] pci 0000:0a:00.0: BAR 2 [io 0xc000-0xc07f] [ 0.603297] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.603587] pci 0000:0a:00.0: supports D1 D2 [ 0.603609] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.604055] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.604501] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.604691] pci 0000:0b:00.0: BAR 0 [mem 0xfb160000-0xfb17ffff] [ 0.604927] pci 0000:0b:00.0: BAR 2 [io 0xb060-0xb07f] [ 0.605088] pci 0000:0b:00.0: BAR 3 [mem 0xfb18c000-0xfb18ffff] [ 0.605614] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.605851] pci 0000:0b:00.0: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.605974] pci 0000:0b:00.0: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.606199] pci 0000:0b:00.0: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.606352] pci 0000:0b:00.0: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.606927] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.607155] pci 0000:0b:00.1: BAR 0 [mem 0xfb140000-0xfb15ffff] [ 0.607364] pci 0000:0b:00.1: BAR 2 [io 0xb040-0xb05f] [ 0.607525] pci 0000:0b:00.1: BAR 3 [mem 0xfb188000-0xfb18bfff] [ 0.608009] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.608240] pci 0000:0b:00.1: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.608363] pci 0000:0b:00.1: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.608578] pci 0000:0b:00.1: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.608609] pci 0000:0b:00.1: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.609171] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.609399] pci 0000:0b:00.2: BAR 0 [mem 0xfb120000-0xfb13ffff] [ 0.609609] pci 0000:0b:00.2: BAR 2 [io 0xb020-0xb03f] [ 0.609771] pci 0000:0b:00.2: BAR 3 [mem 0xfb184000-0xfb187fff] [ 0.610314] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.610544] pci 0000:0b:00.2: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.610609] pci 0000:0b:00.2: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.610824] pci 0000:0b:00.2: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.610947] pci 0000:0b:00.2: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.611477] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.611691] pci 0000:0b:00.3: BAR 0 [mem 0xfb100000-0xfb11ffff] [ 0.611900] pci 0000:0b:00.3: BAR 2 [io 0xb000-0xb01f] [ 0.612061] pci 0000:0b:00.3: BAR 3 [mem 0xfb180000-0xfb183fff] [ 0.612578] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.612723] pci 0000:0b:00.3: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.612879] pci 0000:0b:00.3: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.613094] pci 0000:0b:00.3: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.613217] pci 0000:0b:00.3: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.613808] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.613964] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.614533] pci_bus 0000:00: on NUMA node 0 [ 0.614637] xen: registering gsi 13 triggering 1 polarity 0 [ 0.615604] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.615796] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.615984] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.616172] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.616359] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.616478] ACPI: PCI: Interrupt link LNKE disabled [ 0.616666] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.616785] ACPI: PCI: Interrupt link LNKF disabled [ 0.616997] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.617116] ACPI: PCI: Interrupt link LNKG disabled [ 0.617298] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.617416] ACPI: PCI: Interrupt link LNKH disabled [ 0.617690] xen:balloon: Initialising balloon driver [ 0.617828] iommu: Default domain type: Translated [ 0.617859] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.618048] SCSI subsystem initialized [ 0.618177] libata version 3.00 loaded. [ 0.618630] ACPI: bus type USB registered [ 0.618756] usbcore: registered new interface driver usbfs [ 0.618886] usbcore: registered new interface driver hub [ 0.619009] usbcore: registered new device driver usb [ 0.619138] pps_core: LinuxPPS API ver. 1 registered [ 0.619253] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.619404] PTP clock support registered [ 0.619649] Advanced Linux Sound Architecture Driver Initialized. [ 0.619987] NetLabel: Initializing [ 0.620099] NetLabel: domain hash size = 128 [ 0.620212] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.620346] NetLabel: unlabeled traffic allowed by default [ 0.620647] PCI: Using ACPI for IRQ routing [ 0.656930] PCI: pci_cache_line_size set to 64 bytes [ 0.657708] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.657712] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.657738] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.657774] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.657892] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.658047] vgaarb: loaded [ 0.658639] clocksource: Switched to clocksource tsc-early [ 0.659125] VFS: Disk quotas dquot_6.6.0 [ 0.659246] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.659401] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.659562] pnp: PnP ACPI init [ 0.660012] xen: registering gsi 8 triggering 1 polarity 0 [ 0.660214] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.660340] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.660460] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.660578] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.660727] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.660848] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.660974] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.661096] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.661217] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.661337] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.661457] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.661577] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.661726] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.662133] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.662254] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.662379] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.662498] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.662631] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.663036] xen: registering gsi 4 triggering 1 polarity 0 [ 0.663041] Already setup the GSI :4 [ 0.663152] pnp 00:03: [dma 0 disabled] [ 0.663460] xen: registering gsi 3 triggering 1 polarity 0 [ 0.663471] pnp 00:04: [dma 0 disabled] [ 0.664043] pnp: PnP ACPI: found 5 devices [ 0.695850] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.696058] NET: Registered PF_INET protocol family [ 0.696213] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.696568] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.696751] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.696975] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.697150] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.697321] TCP: Hash tables configured (established 4096 bind 4096) [ 0.697463] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.697586] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.697761] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.698114] RPC: Registered named UNIX socket transport module. [ 0.698235] RPC: Registered udp transport module. [ 0.698388] RPC: Registered tcp transport module. [ 0.698502] RPC: Registered tcp-with-tls transport module. [ 0.698631] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.699254] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.699426] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref]: assigned [ 0.699575] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.699820] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.699996] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.700131] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.701417] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.701567] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.701735] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.701884] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.702030] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.702176] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.702322] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.702468] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.702677] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.702834] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.702980] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.703127] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.703272] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.703418] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.703563] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.703735] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.703938] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.704074] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.704208] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.704380] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.704553] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.704754] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.704877] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.705017] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.705178] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.705337] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.705477] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.705655] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.705791] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.705935] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.706101] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.706221] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.706360] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.706526] pci 0000:0b:00.0: VF BAR 0 [mem 0x90000000-0x9001ffff 64bit pref]: assigned [ 0.706749] pci 0000:0b:00.0: VF BAR 3 [mem 0x90020000-0x9003ffff 64bit pref]: assigned [ 0.706911] pci 0000:0b:00.1: VF BAR 0 [mem 0x90040000-0x9005ffff 64bit pref]: assigned [ 0.707064] pci 0000:0b:00.1: VF BAR 3 [mem 0x90060000-0x9007ffff 64bit pref]: assigned [ 0.707217] pci 0000:0b:00.2: VF BAR 0 [mem 0x90080000-0x9009ffff 64bit pref]: assigned [ 0.707371] pci 0000:0b:00.2: VF BAR 3 [mem 0x900a0000-0x900bffff 64bit pref]: assigned [ 0.707524] pci 0000:0b:00.3: VF BAR 0 [mem 0x900c0000-0x900dffff 64bit pref]: assigned [ 0.707707] pci 0000:0b:00.3: VF BAR 3 [mem 0x900e0000-0x900fffff 64bit pref]: assigned [ 0.707865] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.707985] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.708164] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.708298] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.708471] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.708633] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.708769] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.708890] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.709011] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.709132] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.709252] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.709371] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.709555] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.709694] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.709816] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.709933] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.710052] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.710168] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.710287] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.710403] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.710522] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.710652] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.710787] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.711364] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.711575] xen: registering gsi 19 triggering 0 polarity 1 [ 0.711629] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.720569] xen: registering gsi 18 triggering 0 polarity 1 [ 0.720594] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.736922] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x7c0 took 16017 usecs [ 0.737166] xen: registering gsi 18 triggering 0 polarity 1 [ 0.737173] Already setup the GSI :18 [ 0.752802] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x7c0 took 15319 usecs [ 0.753026] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.753200] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.753278] Unpacking initramfs... [ 0.753321] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.753679] kvm_intel: VMX not supported by CPU 1 [ 0.753802] kvm_amd: CPU 1 isn't AMD or Hygon [ 0.753918] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.754164] clocksource: Switched to clocksource tsc [ 0.760408] Initialise system trusted keyrings [ 0.760724] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.761048] NFS: Registering the id_resolver key type [ 0.761176] Key type id_resolver registered [ 0.761301] Key type id_legacy registered [ 0.761512] 9p: Installing v9fs 9p2000 file system support [ 0.779270] Key type asymmetric registered [ 0.779399] Asymmetric key parser 'x509' registered [ 0.779538] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.779694] io scheduler mq-deadline registered [ 0.779808] io scheduler kyber registered [ 0.783476] xen: registering gsi 16 triggering 0 polarity 1 [ 0.783515] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.783936] xen: registering gsi 16 triggering 0 polarity 1 [ 0.783943] Already setup the GSI :16 [ 0.784418] xen: registering gsi 16 triggering 0 polarity 1 [ 0.784423] Already setup the GSI :16 [ 0.784745] xen: registering gsi 16 triggering 0 polarity 1 [ 0.784753] Already setup the GSI :16 [ 0.785094] xen: registering gsi 16 triggering 0 polarity 1 [ 0.785099] Already setup the GSI :16 [ 0.785578] xen: registering gsi 16 triggering 0 polarity 1 [ 0.785584] Already setup the GSI :16 [ 0.786082] xen: registering gsi 16 triggering 0 polarity 1 [ 0.786087] Already setup the GSI :16 [ 0.786570] xen: registering gsi 17 triggering 0 polarity 1 [ 0.786590] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.786947] xen: registering gsi 19 triggering 0 polarity 1 [ 0.786953] Already setup the GSI :19 [ 0.787403] xen: registering gsi 16 triggering 0 polarity 1 [ 0.787408] Already setup the GSI :16 [ 0.788120] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.788300] ACPI: button: Power Button [PWRB] [ 0.788447] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.788710] ACPI: button: Power Button [PWRF] [ 0.789003] Monitor-Mwait will be used to enter C-1 state [ 0.789036] Monitor-Mwait will be used to enter C-2 state [ 0.789052] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.789381] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.789915] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.790465] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.790825] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.791180] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.791679] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.792120] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.792850] xen:xen_evtchn: Event-channel device installed [ 0.793123] xen_pciback: backend is vpci [ 0.793881] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.794310] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.795200] hpet_acpi_add: no address or irqs in _CRS [ 0.795422] Non-volatile memory driver v1.3 [ 0.797971] loop: module loaded [ 0.804123] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 0.804172] ahci 0000:00:1f.2: version 3.0 [ 0.804388] xen: registering gsi 16 triggering 0 polarity 1 [ 0.804399] Already setup the GSI :16 [ 0.804740] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 6 Gbps, SATA mode [ 0.804906] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 0.805027] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.820564] scsi host0: ahci [ 0.820898] scsi host1: ahci [ 0.821230] scsi host2: ahci [ 0.821530] scsi host3: ahci [ 0.821833] scsi host4: ahci [ 0.822154] scsi host5: ahci [ 0.822306] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 83 lpm-pol 0 [ 0.822455] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 83 lpm-pol 0 [ 0.822602] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 83 lpm-pol 0 [ 0.822749] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 83 lpm-pol 0 [ 0.822906] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 83 lpm-pol 0 [ 0.823053] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 83 lpm-pol 0 [ 0.823526] tun: Universal TUN/TAP device driver, 1.6 [ 0.823853] e100: Intel(R) PRO/100 Network Driver [ 0.823997] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.824137] sky2: driver version 1.30 [ 0.824319] xen_netfront: Initialising Xen virtual ethernet driver [ 0.825871] xen: registering gsi 19 triggering 0 polarity 1 [ 0.825881] Already setup the GSI :19 [ 0.826029] xen: registering gsi 18 triggering 0 polarity 1 [ 0.826041] Already setup the GSI :18 [ 0.826112] xen: registering gsi 18 triggering 0 polarity 1 [ 0.826133] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.826205] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.826318] Already setup the GSI :18 [ 0.827434] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.827949] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.827986] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.828138] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.828265] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.828334] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.828375] ehci-pci 0000:00:1a.0: debug port 2 [ 0.828740] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.828923] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.829083] usb usb1: Product: xHCI Host Controller [ 0.829241] usb usb1: Manufacturer: Linux 6.10.0-rc5+ xhci-hcd [ 0.829362] usb usb1: SerialNumber: 0000:00:14.0 [ 0.829752] hub 1-0:1.0: USB hub found [ 0.829939] hub 1-0:1.0: 8 ports detected [ 0.831401] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.10 [ 0.831554] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.831702] usb usb2: Product: xHCI Host Controller [ 0.831819] usb usb2: Manufacturer: Linux 6.10.0-rc5+ xhci-hcd [ 0.831957] usb usb2: SerialNumber: 0000:00:14.0 [ 0.832263] hub 2-0:1.0: USB hub found [ 0.832412] hub 2-0:1.0: 6 ports detected [ 0.832709] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.833676] usbcore: registered new interface driver usblp [ 0.833807] usbcore: registered new interface driver usb-storage [ 0.833971] i8042: PNP: No PS/2 controller found. [ 0.834268] rtc_cmos 00:00: RTC can wake from S4 [ 0.834967] rtc_cmos 00:00: registered as rtc0 [ 0.835125] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.835308] device-mapper: uevent: version 1.0.3 [ 0.835517] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.835595] xen: registering gsi 18 triggering 0 polarity 1 [ 0.835674] intel_pstate: CPU model not supported [ 0.835677] Already setup the GSI :18 [ 0.835695] hid: raw HID events driver (C) Jiri Kosina [ 0.835829] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.836105] usbcore: registered new interface driver usbhid [ 0.836175] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.836275] usbhid: USB HID core driver [ 0.836982] Initializing XFRM netlink socket [ 0.837139] NET: Registered PF_INET6 protocol family [ 0.837610] Segment Routing with IPv6 [ 0.837731] In-situ OAM (IOAM) with IPv6 [ 0.837871] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.838135] NET: Registered PF_PACKET protocol family [ 0.838278] 9pnet: Installing 9P2000 support [ 0.838404] Key type dns_resolver registered [ 0.838944] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.839268] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.839424] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.839504] IPI shorthand broadcast: enabled [ 0.839569] usb usb3: Product: EHCI Host Controller [ 0.839797] usb usb3: Manufacturer: Linux 6.10.0-rc5+ ehci_hcd [ 0.839934] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.840380] hub 3-0:1.0: USB hub found [ 0.840528] hub 3-0:1.0: 2 ports detected [ 0.840961] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.841164] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 0.841343] ehci-pci 0000:00:1d.0: debug port 2 [ 0.842736] sched_clock: Marking stable (801006796, 40888968)->(1726298316, -884402552) [ 0.843327] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.845476] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.845621] registered taskstats version 1 [ 0.845748] Loading compiled-in X.509 certificates [ 0.847457] PM: Magic number: 12:17:495 [ 0.847720] printk: legacy console [netcon0] enabled [ 0.847837] netconsole: network logging started [ 0.848237] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.851946] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.852328] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.852485] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.852630] usb usb4: Product: EHCI Host Controller [ 0.852752] usb usb4: Manufacturer: Linux 6.10.0-rc5+ ehci_hcd [ 0.852871] usb usb4: SerialNumber: 0000:00:1d.0 [ 0.853206] hub 4-0:1.0: USB hub found [ 0.853348] hub 4-0:1.0: 2 ports detected [ 0.867382] Freeing initrd memory: 20848K [ 0.879107] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.879450] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.879613] ALSA device list: [ 0.879723] No soundcards found. [ 0.880420] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 1.067035] usb 1-3: new high-speed USB device number 2 using xhci_hcd [ 1.082967] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 1.091065] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 1.136314] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.136552] ata2: SATA link down (SStatus 0 SControl 300) [ 1.136694] ata1: SATA link down (SStatus 0 SControl 300) [ 1.136852] ata4: SATA link down (SStatus 0 SControl 300) [ 1.137023] ata5: SATA link down (SStatus 0 SControl 300) [ 1.137182] ata6: SATA link down (SStatus 0 SControl 300) [ 1.137571] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.194618] usb 1-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.194772] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.194911] usb 1-3: Product: USB2.0 Hub [ 1.195760] hub 1-3:1.0: USB hub found [ 1.196214] hub 1-3:1.0: 4 ports detected [ 1.211392] usb 3-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.211546] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.211934] hub 3-1:1.0: USB hub found [ 1.212150] hub 3-1:1.0: 4 ports detected [ 1.219396] usb 4-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.219552] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.219950] hub 4-1:1.0: USB hub found [ 1.220202] hub 4-1:1.0: 4 ports detected [ 1.227923] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.228054] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.255777] ata3.00: configured for UDMA/133 [ 1.256230] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.257121] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.257226] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.257471] sd 2:0:0:0: [sda] Write Protect is off [ 1.257597] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.257667] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.257928] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.274715] sda: sda1 sda2 < sda5 > [ 1.275291] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.277170] Freeing unused kernel image (initmem) memory: 2680K [ 1.277311] Write protecting the kernel read-only data: 24576k [ 1.296986] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 1.311916] usb 1-4: new high-speed USB device number 3 using xhci_hcd [ 1.438192] usb 1-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.438345] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.439006] hub 1-4:1.0: USB hub found [ 1.439217] hub 1-4:1.0: 4 ports detected [ 1.501913] usb 1-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.579375] usb 1-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.579528] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.579673] usb 1-3.2: Product: USB2.0 Hub [ 1.580366] hub 1-3.2:1.0: USB hub found [ 1.580793] hub 1-3.2:1.0: 4 ports detected [ 1.732937] usb 1-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.769252] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.769407] Run /init as init process [ 1.769518] with arguments: [ 1.769520] /init [ 1.769521] placeholder [ 1.769522] with environment: [ 1.769523] HOME=/ [ 1.769524] TERM=linux [ 1.837271] usb 1-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.837435] usb 1-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.843292] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.0/0003:0557:2419.0001/input/input2 [ 1.895386] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 1.898907] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.1/0003:0557:2419.0002/input/input3 [ 1.899361] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.213540] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.213706] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.214123] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20240322/nsprepkg-94) [ 2.215475] xen: registering gsi 16 triggering 0 polarity 1 [ 2.215485] Already setup the GSI :16 [ 2.218807] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.218959] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.219159] xen: registering gsi 16 triggering 0 polarity 1 [ 2.219166] Already setup the GSI :16 [ 2.248410] pps pps0: new PPS source ptp0 [ 2.248629] igb 0000:07:00.0: added PHC on eth0 [ 2.248765] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.248886] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:93:a4:c8 [ 2.249106] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.249223] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.249465] xen: registering gsi 17 triggering 0 polarity 1 [ 2.249475] Already setup the GSI :17 [ 2.278257] pps pps1: new PPS source ptp1 [ 2.278451] igb 0000:08:00.0: added PHC on eth1 [ 2.278586] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.278707] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:93:a4:c9 [ 2.278873] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.279006] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.279236] xen: registering gsi 16 triggering 0 polarity 1 [ 2.279245] Already setup the GSI :16 [ 2.336973] igb 0000:0b:00.0: added PHC on eth2 [ 2.337114] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.337236] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:93:a4:ca [ 2.337440] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.337556] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.337788] xen: registering gsi 17 triggering 0 polarity 1 [ 2.337798] Already setup the GSI :17 [ 2.395516] igb 0000:0b:00.1: added PHC on eth3 [ 2.395654] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.395776] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:93:a4:cb [ 2.396000] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.396124] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.396343] xen: registering gsi 18 triggering 0 polarity 1 [ 2.396351] Already setup the GSI :18 [ 2.452213] igb 0000:0b:00.2: added PHC on eth4 [ 2.452356] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.452478] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:93:a4:cc [ 2.452682] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.452798] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.453079] xen: registering gsi 19 triggering 0 polarity 1 [ 2.453089] Already setup the GSI :19 [ 2.510585] igb 0000:0b:00.3: added PHC on eth5 [ 2.510737] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.510860] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:93:a4:cd [ 2.511083] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.511205] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.514224] igb 0000:07:00.0 enx0cc47a93a4c8: renamed from eth0 [ 2.514674] igb 0000:08:00.0 enx0cc47a93a4c9: renamed from eth1 [ 2.515495] igb 0000:0b:00.0 enx0cc47a93a4ca: renamed from eth2 [ 2.515974] igb 0000:0b:00.1 enx0cc47a93a4cb: renamed from eth3 [ 2.516510] igb 0000:0b:00.2 enx0cc47a93a4cc: renamed from eth4 [ 2.521314] igb 0000:0b:00.3 enx0cc47a93a4cd: renamed from eth5 [ 2.953319] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.081058] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.081297] ixgbe 0000:04:00.0: 0c:c4:7a:93:a8:9e [ 3.374819] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.375285] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20240322/nsprepkg-94) [ 3.375499] xen: registering gsi 17 triggering 0 polarity 1 [ 3.375509] Already setup the GSI :17 [ 4.112471] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.241339] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.241535] ixgbe 0000:04:00.1: 0c:c4:7a:93:a8:9f [ 4.534994] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.537446] ixgbe 0000:04:00.1 enx0cc47a93a89f: renamed from eth1 [ 4.537875] ixgbe 0000:04:00.0 enx0cc47a93a89e: renamed from eth0 [ 4.955090] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 4.962269] EXT4-fs (dm-0): mounted filesystem 26caca4b-d367-4f32-b089-54a3773600cb ro with ordered data mode. Quota mode: none. [ 8.594049] EXT4-fs (dm-0): re-mounted 26caca4b-d367-4f32-b089-54a3773600cb r/w. Quota mode: none. [ 9.872256] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.888993] EXT4-fs (sda1): mounted filesystem b36869ab-8d56-479d-be3c-e3bc19a041e7 r/w with ordered data mode. Quota mode: none. [ 9.964456] Adding 1949692k swap on /dev/mapper/debina1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.495186] xenbr0: port 1(enx0cc47a93a4c8) entered blocking state [ 11.495367] xenbr0: port 1(enx0cc47a93a4c8) entered disabled state [ 11.495499] igb 0000:07:00.0 enx0cc47a93a4c8: entered allmulticast mode [ 11.495668] igb 0000:07:00.0 enx0cc47a93a4c8: entered promiscuous mode [ 14.511545] igb 0000:07:00.0 enx0cc47a93a4c8: igb: enx0cc47a93a4c8 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 14.721264] xenbr0: port 1(enx0cc47a93a4c8) entered blocking state [ 14.721453] xenbr0: port 1(enx0cc47a93a4c8) entered forwarding state