[ 0.000000] Linux version 6.1.96+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Sun Jun 30 02:31:58 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000457] tsc: Detected 2199.998 MHz processor [ 0.000901] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000905] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000912] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000913] Disabled [ 0.000914] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000918] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000957] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027632] RAMDISK: [mem 0x04000000-0x05421fff] [ 0.027640] ACPI: Early table checksum verification disabled [ 0.028239] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028251] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028288] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028336] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028352] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028368] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028384] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028400] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028416] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028432] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028448] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028464] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028480] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028496] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028512] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028528] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028545] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028561] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028576] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028592] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028608] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028624] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028632] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028634] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028635] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028636] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028637] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028638] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028639] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028640] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028641] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028642] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028643] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028644] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028645] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028646] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028647] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028648] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028649] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028650] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028651] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028652] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028701] Setting APIC routing to Xen PV. [ 0.032656] Zone ranges: [ 0.032657] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032659] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032661] Normal empty [ 0.032663] Movable zone start for each node [ 0.032663] Early memory node ranges [ 0.032664] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032666] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032667] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032673] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032708] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034258] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034262] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221775] Remapped 102 page(s) [ 0.223142] ACPI: PM-Timer IO Port: 0x408 [ 0.223196] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223199] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223200] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223202] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223203] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223205] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223206] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223208] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223237] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223250] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223253] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223279] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223284] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223353] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223368] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223371] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223372] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223374] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223378] Booting kernel on Xen [ 0.223379] Xen version: 4.19-unstable (preserve-AD) [ 0.223382] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229623] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.229907] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.229913] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.229916] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.229994] xen: PV spinlocks enabled [ 0.229997] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230002] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230004] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230042] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230052] random: crng init done [ 0.230100] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230126] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231444] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231447] software IO TLB: area num 8. [ 0.290851] Memory: 389300K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1576K init, 1296K bss, 134732K reserved, 0K cma-reserved) [ 0.291017] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.293491] Dynamic Preempt: voluntary [ 0.293590] rcu: Preemptible hierarchical RCU implementation. [ 0.293591] rcu: RCU event tracing is enabled. [ 0.293592] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.293594] Trampoline variant of Tasks RCU enabled. [ 0.293595] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.293596] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.304080] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.304204] xen:events: Using FIFO-based ABI [ 0.304228] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.304237] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.304245] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.304252] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.304260] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.304267] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.304275] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.304282] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.304289] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.304297] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.304305] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.304312] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.304320] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.304329] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.304336] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.304347] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.309693] Console: colour VGA+ 80x25 [ 0.324421] printk: console [tty0] enabled [ 0.325756] printk: console [hvc0] enabled [ 0.325893] ACPI: Core revision 20220331 [ 0.341384] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.341550] Xen: using vcpuop timer interface [ 0.341557] installing Xen timer for CPU 0 [ 0.341707] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.341866] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199998) [ 0.342194] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.342310] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.342437] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.342586] Spectre V2 : Mitigation: Retpolines [ 0.342872] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.343027] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.343146] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.343267] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.343415] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.343533] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.343684] MDS: Mitigation: Clear CPU buffers [ 0.343797] TAA: Mitigation: Clear CPU buffers [ 0.343870] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.344035] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.344180] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.344305] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.344424] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.344543] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.362264] Freeing SMP alternatives memory: 40K [ 0.362391] pid_max: default: 32768 minimum: 301 [ 0.362887] LSM: Security Framework initializing [ 0.363010] SELinux: Initializing. [ 0.363150] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363301] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363956] cpu 0 spinlock event irq 25 [ 0.364076] VPMU disabled by hypervisor. [ 0.364509] cblist_init_generic: Setting adjustable number of callback queues. [ 0.364655] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.364810] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.364870] signal: max sigframe size: 1776 [ 0.365034] rcu: Hierarchical SRCU implementation. [ 0.365167] rcu: Max phase no-delay instances is 400. [ 0.365660] smp: Bringing up secondary CPUs ... [ 0.365993] installing Xen timer for CPU 1 [ 0.366459] cpu 1 spinlock event irq 35 [ 0.367006] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.367175] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.367363] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.368089] installing Xen timer for CPU 2 [ 0.368561] cpu 2 spinlock event irq 41 [ 0.368957] installing Xen timer for CPU 3 [ 0.369412] cpu 3 spinlock event irq 47 [ 0.369412] installing Xen timer for CPU 4 [ 0.370209] cpu 4 spinlock event irq 53 [ 0.370209] installing Xen timer for CPU 5 [ 0.371035] cpu 5 spinlock event irq 59 [ 0.371071] installing Xen timer for CPU 6 [ 0.371909] cpu 6 spinlock event irq 65 [ 0.372126] installing Xen timer for CPU 7 [ 0.372555] cpu 7 spinlock event irq 71 [ 0.373068] smp: Brought up 1 node, 8 CPUs [ 0.373193] smpboot: Max logical packages: 1 [ 0.373408] devtmpfs: initialized [ 0.373408] x86/mm: Memory block size: 128MB [ 0.374105] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.374132] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.374292] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.374544] PM: RTC time: 03:53:23, date: 2024-06-30 [ 0.375127] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.375279] xen:grant_table: Grant tables using version 1 layout [ 0.375416] Grant table initialized [ 0.375730] audit: initializing netlink subsys (disabled) [ 0.375921] audit: type=2000 audit(1719719604.176:1): state=initialized audit_enabled=0 res=1 [ 0.375938] thermal_sys: Registered thermal governor 'step_wise' [ 0.375938] thermal_sys: Registered thermal governor 'user_space' [ 0.376065] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.376489] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.376872] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.503568] PCI: Using configuration type 1 for base access [ 0.506206] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.506939] ACPI: Added _OSI(Module Device) [ 0.507044] ACPI: Added _OSI(Processor Device) [ 0.507157] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.507270] ACPI: Added _OSI(Processor Aggregator Device) [ 0.537612] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.539600] xen: registering gsi 9 triggering 0 polarity 0 [ 0.542375] ACPI: Dynamic OEM Table Load: [ 0.549822] ACPI: Interpreter enabled [ 0.549885] ACPI: PM: (supports S0 S4 S5) [ 0.549997] ACPI: Using IOAPIC for interrupt routing [ 0.550149] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.550300] PCI: Using E820 reservations for host bridge windows [ 0.550864] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.586469] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.586598] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.586834] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.587014] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.587135] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.587311] PCI host bridge to bus 0000:ff [ 0.587423] pci_bus 0000:ff: root bus resource [bus ff] [ 0.587796] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.588197] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.588622] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.589045] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.589482] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.589907] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.590327] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.590983] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.591434] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.592073] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.592501] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.592940] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.593365] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.593784] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.594184] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.594604] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.595024] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.595646] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.595896] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.596355] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.596825] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.597216] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.597680] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.598148] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.598810] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.599410] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.599837] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.600182] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.600646] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.601112] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.601576] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.602033] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.602460] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.602896] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.603519] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.603953] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.604419] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.604883] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.605348] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.605862] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.606464] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.606887] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.607512] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.607761] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.607761] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.607761] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.607864] pci_bus 0000:ff: on NUMA node 0 [ 0.612546] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.612675] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.613154] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.613503] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.613623] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.614316] PCI host bridge to bus 0000:00 [ 0.614432] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.614553] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.614674] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.614818] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.614869] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.615048] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.615685] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.616204] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.616571] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.617088] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.617475] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.618041] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.618405] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.618922] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.619296] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.619818] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.620116] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.620837] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.621124] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.621900] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.622523] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.623184] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.623401] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.623868] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.624211] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.624428] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.624893] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.625195] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.625412] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.626070] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.626438] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.626634] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.627168] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.627485] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.628039] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.628238] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.628359] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.637054] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.637615] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.637812] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.637877] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.638174] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.638726] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.638922] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.639043] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.639327] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.639888] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.640082] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.640203] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.640527] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.640724] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.641282] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.641603] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.642359] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.642553] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.642710] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.642868] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.643026] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.643183] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.643340] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.643656] pci 0000:00:1f.2: PME# supported from D3hot [ 0.643941] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.644158] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.644402] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.644778] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.644967] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.645682] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.645971] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.646302] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.646514] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.647261] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.647473] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.648184] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.648396] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.649099] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.649311] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.650009] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.650143] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.650481] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.650693] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.650976] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.651160] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.651508] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.651729] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.651851] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.652057] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.652178] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.652748] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.652748] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.652748] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.652748] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.652785] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.653952] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.654073] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.654276] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.654396] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.654396] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.654396] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.654396] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.654516] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.654807] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.654864] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.654864] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.654864] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.654864] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.655876] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.656410] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.656870] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.656996] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.657124] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.657475] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.657602] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.657808] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.657965] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.658130] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.658657] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.659138] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.659264] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.659392] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.659728] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.660122] pci 0000:09:00.0: enabling Extended Tags [ 0.660464] pci 0000:09:00.0: supports D1 D2 [ 0.660578] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.660933] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.661059] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.661187] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.661488] pci_bus 0000:0a: extended config space not accessible [ 0.661660] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.661869] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.662037] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.662204] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.662557] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.662846] pci 0000:0a:00.0: supports D1 D2 [ 0.662868] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.663312] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.663449] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.663579] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.663968] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.664168] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.664381] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.664542] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.665053] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.665288] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.665433] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.665651] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.665827] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.666272] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.666473] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.666681] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.666842] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.667258] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.667486] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.667630] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.667848] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.668868] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.669399] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.669599] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.669808] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.669914] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.670449] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.670677] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.670821] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.670932] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.671077] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.671590] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.671797] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.671958] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.672119] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.672627] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.672855] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.673007] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.673235] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.673379] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.673958] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.674084] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.674212] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.674353] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.674844] pci_bus 0000:00: on NUMA node 0 [ 0.674944] xen: registering gsi 13 triggering 1 polarity 0 [ 0.674944] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.675112] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.675303] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.675492] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.675681] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.675799] ACPI: PCI: Interrupt link LNKE disabled [ 0.675864] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.675864] ACPI: PCI: Interrupt link LNKF disabled [ 0.675864] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.675864] ACPI: PCI: Interrupt link LNKG disabled [ 0.675864] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.675864] ACPI: PCI: Interrupt link LNKH disabled [ 0.676979] xen:balloon: Initialising balloon driver [ 0.677958] iommu: Default domain type: Translated [ 0.684871] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.685055] SCSI subsystem initialized [ 0.685902] libata version 3.00 loaded. [ 0.685927] ACPI: bus type USB registered [ 0.686061] usbcore: registered new interface driver usbfs [ 0.686184] usbcore: registered new interface driver hub [ 0.686315] usbcore: registered new device driver usb [ 0.686443] pps_core: LinuxPPS API ver. 1 registered [ 0.686443] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.686443] PTP clock support registered [ 0.686915] Advanced Linux Sound Architecture Driver Initialized. [ 0.687166] NetLabel: Initializing [ 0.687277] NetLabel: domain hash size = 128 [ 0.687277] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.687277] NetLabel: unlabeled traffic allowed by default [ 0.687902] PCI: Using ACPI for IRQ routing [ 0.722318] PCI: pci_cache_line_size set to 64 bytes [ 0.723093] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.723096] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.723119] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.723119] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.723153] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.723302] vgaarb: loaded [ 0.725867] clocksource: Switched to clocksource tsc-early [ 0.725930] VFS: Disk quotas dquot_6.6.0 [ 0.726236] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.726389] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.726546] pnp: PnP ACPI init [ 0.727058] xen: registering gsi 8 triggering 1 polarity 0 [ 0.727256] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.727383] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.727502] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.727620] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.727746] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.727878] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.728009] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.728132] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.728252] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.728372] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.728492] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.728612] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.728731] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.729165] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.729290] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.729408] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.729526] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.729644] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.730093] xen: registering gsi 4 triggering 1 polarity 0 [ 0.730099] Already setup the GSI :4 [ 0.730211] pnp 00:03: [dma 0 disabled] [ 0.730524] xen: registering gsi 3 triggering 1 polarity 0 [ 0.730535] pnp 00:04: [dma 0 disabled] [ 0.731155] pnp: PnP ACPI: found 5 devices [ 0.762324] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.762485] NET: Registered PF_INET protocol family [ 0.762646] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.763048] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.763202] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.763349] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.763506] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.763676] TCP: Hash tables configured (established 4096 bind 4096) [ 0.763824] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.763999] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.764180] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.764585] RPC: Registered named UNIX socket transport module. [ 0.764711] RPC: Registered udp transport module. [ 0.764825] RPC: Registered tcp transport module. [ 0.764965] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.765536] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.765707] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.765885] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.766061] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.766210] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.766385] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.766587] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.766721] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.766898] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.767037] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.767185] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.767328] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.767473] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.767595] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.767740] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.767897] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.768084] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.768209] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.768353] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.768497] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.768641] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.768763] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.768932] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.769084] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.769230] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.769396] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.769529] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.769700] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.769884] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.770078] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.770200] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.770339] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.770500] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.770619] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.770785] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.770977] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.771100] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.771241] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.771407] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.771527] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.771665] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.771829] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.772009] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.772186] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.772339] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.772491] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.772643] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.772796] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.772974] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.773130] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.773250] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.773388] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.773553] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.773726] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.773887] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.774019] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.774140] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.774261] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.774382] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.774501] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.774619] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.774764] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.774928] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.775058] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.775178] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.775297] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.775413] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.775532] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.775648] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.775767] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.775897] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.776033] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.776586] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.776806] xen: registering gsi 19 triggering 0 polarity 1 [ 0.776833] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.785723] xen: registering gsi 18 triggering 0 polarity 1 [ 0.785744] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.801198] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 15163 usecs [ 0.801442] xen: registering gsi 18 triggering 0 polarity 1 [ 0.801448] Already setup the GSI :18 [ 0.818046] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 16268 usecs [ 0.818258] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.818432] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.818506] Unpacking initramfs... [ 0.818551] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.818896] kvm: no hardware support for 'kvm_intel' [ 0.826667] has_svm: not amd or hygon [ 0.826782] kvm: no hardware support for 'kvm_amd' [ 0.826912] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.827276] clocksource: Switched to clocksource tsc [ 0.830014] Initialise system trusted keyrings [ 0.830375] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.831850] NFS: Registering the id_resolver key type [ 0.831978] Key type id_resolver registered [ 0.832089] Key type id_legacy registered [ 0.832300] 9p: Installing v9fs 9p2000 file system support [ 0.846180] Key type asymmetric registered [ 0.846305] Asymmetric key parser 'x509' registered [ 0.846442] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.846606] io scheduler mq-deadline registered [ 0.846727] io scheduler kyber registered [ 0.847539] xen: registering gsi 16 triggering 0 polarity 1 [ 0.847571] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.848107] xen: registering gsi 16 triggering 0 polarity 1 [ 0.848113] Already setup the GSI :16 [ 0.848731] xen: registering gsi 16 triggering 0 polarity 1 [ 0.848736] Already setup the GSI :16 [ 0.849058] xen: registering gsi 16 triggering 0 polarity 1 [ 0.849062] Already setup the GSI :16 [ 0.849378] xen: registering gsi 16 triggering 0 polarity 1 [ 0.849382] Already setup the GSI :16 [ 0.850001] xen: registering gsi 16 triggering 0 polarity 1 [ 0.850006] Already setup the GSI :16 [ 0.850610] xen: registering gsi 16 triggering 0 polarity 1 [ 0.850615] Already setup the GSI :16 [ 0.851057] xen: registering gsi 17 triggering 0 polarity 1 [ 0.851074] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.851415] xen: registering gsi 19 triggering 0 polarity 1 [ 0.851420] Already setup the GSI :19 [ 0.851871] xen: registering gsi 16 triggering 0 polarity 1 [ 0.851876] Already setup the GSI :16 [ 0.852553] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.852729] ACPI: button: Power Button [PWRB] [ 0.852872] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.853113] ACPI: button: Power Button [PWRF] [ 0.853394] Monitor-Mwait will be used to enter C-1 state [ 0.853427] Monitor-Mwait will be used to enter C-2 state [ 0.853443] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.853916] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.854482] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.855007] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.855508] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.856017] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.856466] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.856795] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.857647] xen:xen_evtchn: Event-channel device installed [ 0.857865] xen_pciback: backend is vpci [ 0.858573] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.858879] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.859622] hpet_acpi_add: no address or irqs in _CRS [ 0.859828] Non-volatile memory driver v1.3 [ 0.859942] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.862592] loop: module loaded [ 0.868795] ahci 0000:00:1f.2: version 3.0 [ 0.868895] xen: registering gsi 16 triggering 0 polarity 1 [ 0.868904] Already setup the GSI :16 [ 0.869231] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.869381] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.885185] scsi host0: ahci [ 0.885644] scsi host1: ahci [ 0.885997] scsi host2: ahci [ 0.886360] scsi host3: ahci [ 0.886719] scsi host4: ahci [ 0.887046] scsi host5: ahci [ 0.887192] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 74 [ 0.887338] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 74 [ 0.887483] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 74 [ 0.887644] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 74 [ 0.887789] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 74 [ 0.887933] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 74 [ 0.888362] tun: Universal TUN/TAP device driver, 1.6 [ 0.888625] e100: Intel(R) PRO/100 Network Driver [ 0.888746] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.888884] sky2: driver version 1.30 [ 0.889073] xen_netfront: Initialising Xen virtual ethernet driver [ 0.889542] xen: registering gsi 18 triggering 0 polarity 1 [ 0.889555] Already setup the GSI :18 [ 0.889801] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.890030] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.890207] ehci-pci 0000:00:1a.0: debug port 2 [ 0.894338] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.900564] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.900822] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.900971] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.901115] usb usb1: Product: EHCI Host Controller [ 0.901229] usb usb1: Manufacturer: Linux 6.1.96+ ehci_hcd [ 0.901345] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.901650] hub 1-0:1.0: USB hub found [ 0.901774] hub 1-0:1.0: 2 ports detected [ 0.902139] xen: registering gsi 18 triggering 0 polarity 1 [ 0.902149] Already setup the GSI :18 [ 0.902341] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.902579] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.902754] ehci-pci 0000:00:1d.0: debug port 2 [ 0.906836] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.913548] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.913768] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.913916] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.914061] usb usb2: Product: EHCI Host Controller [ 0.914175] usb usb2: Manufacturer: Linux 6.1.96+ ehci_hcd [ 0.914290] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.914578] hub 2-0:1.0: USB hub found [ 0.914742] hub 2-0:1.0: 2 ports detected [ 0.915170] xen: registering gsi 19 triggering 0 polarity 1 [ 0.915180] Already setup the GSI :19 [ 0.915385] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.915609] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.916827] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.917292] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.917533] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.917680] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.917883] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.918031] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.918174] usb usb3: Product: xHCI Host Controller [ 0.918289] usb usb3: Manufacturer: Linux 6.1.96+ xhci-hcd [ 0.918404] usb usb3: SerialNumber: 0000:00:14.0 [ 0.918691] hub 3-0:1.0: USB hub found [ 0.918855] hub 3-0:1.0: 8 ports detected [ 0.919999] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.920185] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.920330] usb usb4: Product: xHCI Host Controller [ 0.920444] usb usb4: Manufacturer: Linux 6.1.96+ xhci-hcd [ 0.920574] usb usb4: SerialNumber: 0000:00:14.0 [ 0.920825] hub 4-0:1.0: USB hub found [ 0.920956] hub 4-0:1.0: 6 ports detected [ 0.922168] usbcore: registered new interface driver usblp [ 0.922311] usbcore: registered new interface driver usb-storage [ 0.922462] i8042: PNP: No PS/2 controller found. [ 0.922849] rtc_cmos 00:00: RTC can wake from S4 [ 0.923581] rtc_cmos 00:00: registered as rtc0 [ 0.923744] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.923973] device-mapper: uevent: version 1.0.3 [ 0.924219] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.924254] Freeing initrd memory: 20616K [ 0.924260] xen: registering gsi 18 triggering 0 polarity 1 [ 0.924269] Already setup the GSI :18 [ 0.924314] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.924353] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.924401] intel_pstate: CPU model not supported [ 0.924790] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.924884] hid: raw HID events driver (C) Jiri Kosina [ 0.925344] usbcore: registered new interface driver usbhid [ 0.925464] usbhid: USB HID core driver [ 0.925977] Initializing XFRM netlink socket [ 0.926208] NET: Registered PF_INET6 protocol family [ 0.926813] Segment Routing with IPv6 [ 0.926936] In-situ OAM (IOAM) with IPv6 [ 0.927079] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.927350] NET: Registered PF_PACKET protocol family [ 0.927506] 9pnet: Installing 9P2000 support [ 0.927654] Key type dns_resolver registered [ 0.928372] IPI shorthand broadcast: enabled [ 0.928513] sched_clock: Marking stable (890818467, 37514439)->(1774807776, -846474870) [ 0.929097] registered taskstats version 1 [ 0.929213] Loading compiled-in X.509 certificates [ 0.931854] PM: Magic number: 12:908:867 [ 0.932085] printk: console [netcon0] enabled [ 0.932200] netconsole: network logging started [ 0.932551] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.944136] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.944476] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.945162] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.945340] ALSA device list: [ 0.945459] No soundcards found. [ 1.143594] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.151613] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.159629] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.196820] ata4: SATA link down (SStatus 0 SControl 300) [ 1.197094] ata6: SATA link down (SStatus 0 SControl 300) [ 1.197232] ata1: SATA link down (SStatus 0 SControl 300) [ 1.197371] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.197544] ata5: SATA link down (SStatus 0 SControl 300) [ 1.197784] ata2: SATA link down (SStatus 0 SControl 300) [ 1.198599] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.279906] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.280062] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.280234] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.280383] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.280708] hub 1-1:1.0: USB hub found [ 1.280850] hub 2-1:1.0: USB hub found [ 1.280974] hub 1-1:1.0: 4 ports detected [ 1.281161] hub 2-1:1.0: 4 ports detected [ 1.284745] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.284883] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.287492] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.287671] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.287796] usb 3-3: Product: USB2.0 Hub [ 1.288744] hub 3-3:1.0: USB hub found [ 1.289334] hub 3-3:1.0: 4 ports detected [ 1.312761] ata3.00: configured for UDMA/133 [ 1.313249] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.314212] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.314356] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.314577] sd 2:0:0:0: [sda] Write Protect is off [ 1.314701] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.314770] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.315008] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.333698] sda: sda1 sda2 < sda5 > [ 1.334108] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.335372] Freeing unused kernel image (initmem) memory: 1576K [ 1.335501] Write protecting the kernel read-only data: 22528k [ 1.353466] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.354779] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.405562] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.531843] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.531998] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.532672] hub 3-4:1.0: USB hub found [ 1.532884] hub 3-4:1.0: 4 ports detected [ 1.595573] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.672995] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.673155] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.673301] usb 3-3.2: Product: USB2.0 Hub [ 1.673976] hub 3-3.2:1.0: USB hub found [ 1.674435] hub 3-3.2:1.0: 4 ports detected [ 1.814247] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.814372] Run /init as init process [ 1.814486] with arguments: [ 1.814487] /init [ 1.814488] placeholder [ 1.814489] with environment: [ 1.814490] HOME=/ [ 1.814491] TERM=linux [ 1.825572] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.931055] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.931217] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.937062] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 1.988888] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 1.991780] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 1.992095] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.253902] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.254067] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.254547] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.254834] xen: registering gsi 16 triggering 0 polarity 1 [ 2.254847] Already setup the GSI :16 [ 2.258729] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.258855] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.259065] xen: registering gsi 16 triggering 0 polarity 1 [ 2.259073] Already setup the GSI :16 [ 2.285389] pps pps0: new PPS source ptp0 [ 2.285605] igb 0000:07:00.0: added PHC on eth0 [ 2.285741] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.285862] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.286067] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.286182] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.286424] xen: registering gsi 17 triggering 0 polarity 1 [ 2.286433] Already setup the GSI :17 [ 2.316027] pps pps1: new PPS source ptp1 [ 2.316212] igb 0000:08:00.0: added PHC on eth1 [ 2.316345] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.316466] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.316653] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.316769] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.316994] xen: registering gsi 16 triggering 0 polarity 1 [ 2.317001] Already setup the GSI :16 [ 2.374333] igb 0000:0b:00.0: added PHC on eth2 [ 2.374472] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.374608] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.374807] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.374922] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.375145] xen: registering gsi 17 triggering 0 polarity 1 [ 2.375154] Already setup the GSI :17 [ 2.432177] igb 0000:0b:00.1: added PHC on eth3 [ 2.432319] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.432440] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.432652] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.432768] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.433010] xen: registering gsi 18 triggering 0 polarity 1 [ 2.433019] Already setup the GSI :18 [ 2.488073] igb 0000:0b:00.2: added PHC on eth4 [ 2.488216] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.488338] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.488570] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.488689] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.488940] xen: registering gsi 19 triggering 0 polarity 1 [ 2.488949] Already setup the GSI :19 [ 2.546312] igb 0000:0b:00.3: added PHC on eth5 [ 2.546450] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.546584] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.546789] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.546904] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.549498] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.558151] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.570815] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.584983] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.596893] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.608120] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 2.995212] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.124839] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.125080] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.419634] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.420176] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.420403] xen: registering gsi 17 triggering 0 polarity 1 [ 3.420415] Already setup the GSI :17 [ 4.169330] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.299056] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.299262] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.595321] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.597587] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.606279] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 5.027054] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.035255] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.637857] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.626193] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.645768] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.724101] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.255385] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.255568] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.255746] device enx0cc47a9f87be entered promiscuous mode [ 14.781154] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 14.885919] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 14.886171] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 14.886295] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 14.886591] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready