[ 0.000000] Linux version 6.1.96+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Sun Jun 30 02:31:58 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000459] tsc: Detected 2199.996 MHz processor [ 0.000903] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000906] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000913] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000915] Disabled [ 0.000916] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000920] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000959] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027909] RAMDISK: [mem 0x04000000-0x05421fff] [ 0.027917] ACPI: Early table checksum verification disabled [ 0.028516] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028528] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028564] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028612] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028629] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028645] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028668] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028684] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028700] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028717] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028733] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028751] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028767] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028783] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028800] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028815] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028831] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028848] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028863] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028880] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028896] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028911] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028920] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028922] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028923] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028924] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028925] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028926] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028927] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028927] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028928] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028929] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028930] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028931] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028932] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028933] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028934] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028935] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028936] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028937] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028938] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028939] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028985] Setting APIC routing to Xen PV. [ 0.032931] Zone ranges: [ 0.032932] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032935] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032937] Normal empty [ 0.032938] Movable zone start for each node [ 0.032939] Early memory node ranges [ 0.032939] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032941] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032943] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032948] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032983] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034534] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034539] p2m virtual area at (____ptrval____), size is 40000000 [ 0.222094] Remapped 102 page(s) [ 0.223466] ACPI: PM-Timer IO Port: 0x408 [ 0.223519] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223522] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223523] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223525] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223526] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223528] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223529] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223531] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223559] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223572] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223575] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223601] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223606] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223675] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223689] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223692] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223693] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223695] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223699] Booting kernel on Xen [ 0.223700] Xen version: 4.19-unstable (preserve-AD) [ 0.223703] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229968] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.230253] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.230259] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.230262] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230340] xen: PV spinlocks enabled [ 0.230343] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230348] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230350] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230389] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230398] random: crng init done [ 0.230447] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230472] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231804] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231807] software IO TLB: area num 8. [ 0.294201] Memory: 389300K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1576K init, 1296K bss, 134732K reserved, 0K cma-reserved) [ 0.294369] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.296850] Dynamic Preempt: voluntary [ 0.296949] rcu: Preemptible hierarchical RCU implementation. [ 0.296950] rcu: RCU event tracing is enabled. [ 0.296951] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.296953] Trampoline variant of Tasks RCU enabled. [ 0.296954] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.296955] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.307426] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.307548] xen:events: Using FIFO-based ABI [ 0.307575] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.307583] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.307591] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.307598] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.307606] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.307613] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.307621] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.307628] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.307635] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.307643] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.307650] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.307658] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.307665] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.307673] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.307680] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.307691] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.313069] Console: colour VGA+ 80x25 [ 0.327890] printk: console [tty0] enabled [ 0.329168] printk: console [hvc0] enabled [ 0.329289] ACPI: Core revision 20220331 [ 0.343270] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.343435] Xen: using vcpuop timer interface [ 0.343441] installing Xen timer for CPU 0 [ 0.343584] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.343743] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199996) [ 0.344068] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.344185] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.344313] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.344462] Spectre V2 : Mitigation: Retpolines [ 0.344748] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.344895] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.345022] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.345144] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.345292] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.345411] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.345563] MDS: Mitigation: Clear CPU buffers [ 0.345677] TAA: Mitigation: Clear CPU buffers [ 0.345747] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.345912] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.346058] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.346177] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.346303] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.346429] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.364088] Freeing SMP alternatives memory: 40K [ 0.364220] pid_max: default: 32768 minimum: 301 [ 0.364763] LSM: Security Framework initializing [ 0.364886] SELinux: Initializing. [ 0.365025] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.365173] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.365834] cpu 0 spinlock event irq 25 [ 0.365954] VPMU disabled by hypervisor. [ 0.366389] cblist_init_generic: Setting adjustable number of callback queues. [ 0.366536] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.366692] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.366748] signal: max sigframe size: 1776 [ 0.366911] rcu: Hierarchical SRCU implementation. [ 0.367043] rcu: Max phase no-delay instances is 400. [ 0.367537] smp: Bringing up secondary CPUs ... [ 0.367869] installing Xen timer for CPU 1 [ 0.368746] cpu 1 spinlock event irq 35 [ 0.368903] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.369749] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.369939] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.370360] installing Xen timer for CPU 2 [ 0.370808] cpu 2 spinlock event irq 41 [ 0.370951] installing Xen timer for CPU 3 [ 0.371439] cpu 3 spinlock event irq 47 [ 0.371954] installing Xen timer for CPU 4 [ 0.372452] cpu 4 spinlock event irq 53 [ 0.372950] installing Xen timer for CPU 5 [ 0.373426] cpu 5 spinlock event irq 59 [ 0.373844] installing Xen timer for CPU 6 [ 0.374304] cpu 6 spinlock event irq 65 [ 0.374772] installing Xen timer for CPU 7 [ 0.375290] cpu 7 spinlock event irq 71 [ 0.375290] smp: Brought up 1 node, 8 CPUs [ 0.375746] smpboot: Max logical packages: 1 [ 0.375966] devtmpfs: initialized [ 0.375966] x86/mm: Memory block size: 128MB [ 0.376767] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.377016] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.377171] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.377422] PM: RTC time: 04:07:49, date: 2024-06-30 [ 0.377673] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.377786] xen:grant_table: Grant tables using version 1 layout [ 0.377925] Grant table initialized [ 0.378227] audit: initializing netlink subsys (disabled) [ 0.378362] audit: type=2000 audit(1719720469.769:1): state=initialized audit_enabled=0 res=1 [ 0.378758] thermal_sys: Registered thermal governor 'step_wise' [ 0.378762] thermal_sys: Registered thermal governor 'user_space' [ 0.378924] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.379355] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.379511] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.507664] PCI: Using configuration type 1 for base access [ 0.510298] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.510824] ACPI: Added _OSI(Module Device) [ 0.510942] ACPI: Added _OSI(Processor Device) [ 0.511073] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.511205] ACPI: Added _OSI(Processor Aggregator Device) [ 0.557561] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.560924] xen: registering gsi 9 triggering 0 polarity 0 [ 0.565049] ACPI: Dynamic OEM Table Load: [ 0.571848] ACPI: Interpreter enabled [ 0.571983] ACPI: PM: (supports S0 S4 S5) [ 0.572095] ACPI: Using IOAPIC for interrupt routing [ 0.572243] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.572411] PCI: Using E820 reservations for host bridge windows [ 0.573004] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.606714] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.606750] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.606992] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.607257] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.607378] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.607555] PCI host bridge to bus 0000:ff [ 0.607669] pci_bus 0000:ff: root bus resource [bus ff] [ 0.607825] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.608273] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.608711] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.609052] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.609496] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.609929] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.610351] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.610797] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.611246] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.611693] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.612050] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.612475] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.612908] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.613331] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.613778] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.614201] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.614635] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.615057] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.615311] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.615787] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.616275] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.616755] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.617223] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.617706] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.618095] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.618564] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.618991] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.619423] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.619911] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.620377] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.620857] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.621315] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.621756] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.622181] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.622616] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.623060] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.623537] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.624019] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.624496] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.625015] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.625439] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.625873] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.626301] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.626562] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.627005] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.627432] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.627871] pci_bus 0000:ff: on NUMA node 0 [ 0.632249] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.632378] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.632667] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.632970] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.633092] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.633589] PCI host bridge to bus 0000:00 [ 0.633719] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.633746] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.633868] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.634013] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.634159] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.634339] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.634988] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.635521] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.635898] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.636429] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.636824] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.637341] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.637707] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.639142] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.639531] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.640064] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.640449] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.640973] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.641384] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.641965] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.642601] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.643278] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.643505] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.643969] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.644332] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.644551] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.645011] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.645321] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.645554] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.646018] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.646397] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.646595] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.647135] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.647466] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.648016] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.648219] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.648352] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.655918] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.656490] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.656687] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.656754] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.657057] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.657617] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.657810] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.657942] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.658228] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.658788] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.658994] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.659117] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.659442] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.659640] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.660174] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.660497] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.661261] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.661460] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.661618] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.661776] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.661945] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.662103] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.662261] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.662574] pci 0000:00:1f.2: PME# supported from D3hot [ 0.662862] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.663088] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.663333] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.663714] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.663856] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.664578] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.664889] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.665223] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.665444] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.666226] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.666440] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.667160] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.667374] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.668093] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.668309] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.669022] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.669157] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.669497] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.669717] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.669887] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.670072] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.670424] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.670645] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.670746] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.670954] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.671076] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.671651] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.671840] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.672126] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.672338] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.672697] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.672829] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.672951] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.673156] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.673277] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.673850] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.673985] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.674124] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.674415] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.674719] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.674995] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.675122] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.675330] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.675557] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.675723] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.676158] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.676632] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.676756] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.676885] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.677240] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.677360] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.677606] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.677823] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.677989] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.678529] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.679000] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.679127] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.679256] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.679608] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.680000] pci 0000:09:00.0: enabling Extended Tags [ 0.680348] pci 0000:09:00.0: supports D1 D2 [ 0.680471] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.680834] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.680961] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.681090] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.681393] pci_bus 0000:0a: extended config space not accessible [ 0.681576] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.681780] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.681948] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.682116] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.682480] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.682769] pci 0000:0a:00.0: supports D1 D2 [ 0.682883] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.683351] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.683499] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.683630] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.684014] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.684215] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.684432] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.684603] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.685123] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.685359] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.685504] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.685730] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.685746] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.686311] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.686522] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.686731] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.686795] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.687322] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.687552] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.687698] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.687810] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.687955] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.688490] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.688692] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.688836] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.688998] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.689515] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.689745] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.689891] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.690118] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.690264] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.690784] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.690986] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.691202] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.691365] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.691876] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.692121] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.692267] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.692486] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.692631] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.693182] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.693309] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.693441] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.693589] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.694065] pci_bus 0000:00: on NUMA node 0 [ 0.694161] xen: registering gsi 13 triggering 1 polarity 0 [ 0.695162] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.695358] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.695549] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.695739] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.695929] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.696058] ACPI: PCI: Interrupt link LNKE disabled [ 0.696250] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.696370] ACPI: PCI: Interrupt link LNKF disabled [ 0.696555] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.696673] ACPI: PCI: Interrupt link LNKG disabled [ 0.696818] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.696937] ACPI: PCI: Interrupt link LNKH disabled [ 0.697210] xen:balloon: Initialising balloon driver [ 0.697836] iommu: Default domain type: Translated [ 0.704749] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.704936] SCSI subsystem initialized [ 0.705792] libata version 3.00 loaded. [ 0.705792] ACPI: bus type USB registered [ 0.705922] usbcore: registered new interface driver usbfs [ 0.706046] usbcore: registered new interface driver hub [ 0.706167] usbcore: registered new device driver usb [ 0.706167] pps_core: LinuxPPS API ver. 1 registered [ 0.706167] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.706167] PTP clock support registered [ 0.706790] Advanced Linux Sound Architecture Driver Initialized. [ 0.707045] NetLabel: Initializing [ 0.707157] NetLabel: domain hash size = 128 [ 0.707157] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.707157] NetLabel: unlabeled traffic allowed by default [ 0.707157] PCI: Using ACPI for IRQ routing [ 0.742684] PCI: pci_cache_line_size set to 64 bytes [ 0.743478] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.743481] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.743507] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.743507] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.743507] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.743747] vgaarb: loaded [ 0.745747] clocksource: Switched to clocksource tsc-early [ 0.745979] VFS: Disk quotas dquot_6.6.0 [ 0.746103] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.746255] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.746413] pnp: PnP ACPI init [ 0.746910] xen: registering gsi 8 triggering 1 polarity 0 [ 0.747056] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.747181] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.747301] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.747420] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.747539] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.747658] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.747804] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.747934] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.748055] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.748176] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.748302] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.748423] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.748543] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.748955] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.749078] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.749197] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.749320] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.749455] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.749882] xen: registering gsi 4 triggering 1 polarity 0 [ 0.749886] Already setup the GSI :4 [ 0.749999] pnp 00:03: [dma 0 disabled] [ 0.750307] xen: registering gsi 3 triggering 1 polarity 0 [ 0.750318] pnp 00:04: [dma 0 disabled] [ 0.750908] pnp: PnP ACPI: found 5 devices [ 0.783082] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.783237] NET: Registered PF_INET protocol family [ 0.783398] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.783784] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.783936] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.784117] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.784269] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.784439] TCP: Hash tables configured (established 4096 bind 4096) [ 0.784582] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.784705] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.784895] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.785273] RPC: Registered named UNIX socket transport module. [ 0.785403] RPC: Registered udp transport module. [ 0.785517] RPC: Registered tcp transport module. [ 0.785631] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.786149] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.786321] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.786486] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.786649] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.786821] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.786997] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.787171] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.787313] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.787477] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.787600] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.787764] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.787909] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.788055] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.788187] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.788332] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.788477] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.788623] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.788763] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.788909] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.789053] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.789199] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.789322] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.789468] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.789615] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.789779] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.789914] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.790048] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.790220] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.790394] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.790568] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.790688] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.790850] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.791018] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.791138] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.791277] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.791446] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.791567] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.791709] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.791892] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.792013] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.792152] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.792332] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.792497] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.792651] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.792826] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.792980] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.793134] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.793293] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.793446] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.793601] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.793730] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.793888] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.794023] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.794196] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.794347] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.794468] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.794587] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.794708] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.794847] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.794967] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.795094] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.795240] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.795356] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.795476] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.795593] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.795712] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.795846] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.795966] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.796083] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.796202] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.796319] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.796438] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.797004] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.797225] xen: registering gsi 19 triggering 0 polarity 1 [ 0.797251] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.806137] xen: registering gsi 18 triggering 0 polarity 1 [ 0.806156] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.822943] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 16462 usecs [ 0.823187] xen: registering gsi 18 triggering 0 polarity 1 [ 0.823193] Already setup the GSI :18 [ 0.840939] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 17389 usecs [ 0.841154] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.841328] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.841415] Unpacking initramfs... [ 0.841449] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.841802] kvm: no hardware support for 'kvm_intel' [ 0.849791] has_svm: not amd or hygon [ 0.849906] kvm: no hardware support for 'kvm_amd' [ 0.850024] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.850602] clocksource: Switched to clocksource tsc [ 0.857846] Initialise system trusted keyrings [ 0.858139] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.859659] NFS: Registering the id_resolver key type [ 0.859785] Key type id_resolver registered [ 0.859901] Key type id_legacy registered [ 0.860136] 9p: Installing v9fs 9p2000 file system support [ 0.873852] Key type asymmetric registered [ 0.873978] Asymmetric key parser 'x509' registered [ 0.874139] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.874296] io scheduler mq-deadline registered [ 0.874411] io scheduler kyber registered [ 0.875415] xen: registering gsi 16 triggering 0 polarity 1 [ 0.875446] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.875986] xen: registering gsi 16 triggering 0 polarity 1 [ 0.875991] Already setup the GSI :16 [ 0.876633] xen: registering gsi 16 triggering 0 polarity 1 [ 0.876638] Already setup the GSI :16 [ 0.876963] xen: registering gsi 16 triggering 0 polarity 1 [ 0.876967] Already setup the GSI :16 [ 0.877329] xen: registering gsi 16 triggering 0 polarity 1 [ 0.877334] Already setup the GSI :16 [ 0.877938] xen: registering gsi 16 triggering 0 polarity 1 [ 0.877942] Already setup the GSI :16 [ 0.878566] xen: registering gsi 16 triggering 0 polarity 1 [ 0.878571] Already setup the GSI :16 [ 0.879012] xen: registering gsi 17 triggering 0 polarity 1 [ 0.879029] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.879385] xen: registering gsi 19 triggering 0 polarity 1 [ 0.879390] Already setup the GSI :19 [ 0.879826] xen: registering gsi 16 triggering 0 polarity 1 [ 0.879830] Already setup the GSI :16 [ 0.880509] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.880686] ACPI: button: Power Button [PWRB] [ 0.880835] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.881026] ACPI: button: Power Button [PWRF] [ 0.881311] Monitor-Mwait will be used to enter C-1 state [ 0.881324] Monitor-Mwait will be used to enter C-2 state [ 0.881331] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.881715] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.882144] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.882513] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.882886] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.883395] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.884161] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.884673] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.885495] xen:xen_evtchn: Event-channel device installed [ 0.885705] xen_pciback: backend is vpci [ 0.886556] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.886883] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.887644] hpet_acpi_add: no address or irqs in _CRS [ 0.887874] Non-volatile memory driver v1.3 [ 0.887989] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.890883] loop: module loaded [ 0.897427] ahci 0000:00:1f.2: version 3.0 [ 0.897530] xen: registering gsi 16 triggering 0 polarity 1 [ 0.897539] Already setup the GSI :16 [ 0.897866] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.898017] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.913700] scsi host0: ahci [ 0.914153] scsi host1: ahci [ 0.914480] scsi host2: ahci [ 0.914808] scsi host3: ahci [ 0.915160] scsi host4: ahci [ 0.915510] scsi host5: ahci [ 0.915653] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 0.915800] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 0.915945] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 0.916119] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 0.916273] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 0.916418] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 0.916936] tun: Universal TUN/TAP device driver, 1.6 [ 0.917248] e100: Intel(R) PRO/100 Network Driver [ 0.917366] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.917503] sky2: driver version 1.30 [ 0.917690] xen_netfront: Initialising Xen virtual ethernet driver [ 0.918096] xen: registering gsi 18 triggering 0 polarity 1 [ 0.918106] Already setup the GSI :18 [ 0.918320] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.918509] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.918687] ehci-pci 0000:00:1a.0: debug port 2 [ 0.922839] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.929125] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.929367] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.929516] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.929661] usb usb1: Product: EHCI Host Controller [ 0.929777] usb usb1: Manufacturer: Linux 6.1.96+ ehci_hcd [ 0.929893] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.930215] hub 1-0:1.0: USB hub found [ 0.930341] hub 1-0:1.0: 2 ports detected [ 0.930711] xen: registering gsi 18 triggering 0 polarity 1 [ 0.930721] Already setup the GSI :18 [ 0.930915] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.931146] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.931327] ehci-pci 0000:00:1d.0: debug port 2 [ 0.935431] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.942117] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.942337] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.942486] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.942630] usb usb2: Product: EHCI Host Controller [ 0.942745] usb usb2: Manufacturer: Linux 6.1.96+ ehci_hcd [ 0.942861] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.943145] hub 2-0:1.0: USB hub found [ 0.943270] hub 2-0:1.0: 2 ports detected [ 0.943701] xen: registering gsi 19 triggering 0 polarity 1 [ 0.943710] Already setup the GSI :19 [ 0.943915] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.944120] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.945335] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.945809] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.946010] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.946175] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.946383] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.946532] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.946679] usb usb3: Product: xHCI Host Controller [ 0.946796] usb usb3: Manufacturer: Linux 6.1.96+ xhci-hcd [ 0.946916] usb usb3: SerialNumber: 0000:00:14.0 [ 0.947281] hub 3-0:1.0: USB hub found [ 0.947424] hub 3-0:1.0: 8 ports detected [ 0.948701] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.948863] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.949008] usb usb4: Product: xHCI Host Controller [ 0.949092] Freeing initrd memory: 20616K [ 0.949155] usb usb4: Manufacturer: Linux 6.1.96+ xhci-hcd [ 0.949378] usb usb4: SerialNumber: 0000:00:14.0 [ 0.949688] hub 4-0:1.0: USB hub found [ 0.949819] hub 4-0:1.0: 6 ports detected [ 0.950954] usbcore: registered new interface driver usblp [ 0.951128] usbcore: registered new interface driver usb-storage [ 0.951294] i8042: PNP: No PS/2 controller found. [ 0.951678] rtc_cmos 00:00: RTC can wake from S4 [ 0.952336] rtc_cmos 00:00: registered as rtc0 [ 0.952493] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.952692] device-mapper: uevent: version 1.0.3 [ 0.952806] xen: registering gsi 18 triggering 0 polarity 1 [ 0.952818] Already setup the GSI :18 [ 0.952922] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.953000] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.953151] intel_pstate: CPU model not supported [ 0.953180] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.953293] hid: raw HID events driver (C) Jiri Kosina [ 0.953748] usbcore: registered new interface driver usbhid [ 0.953820] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.953866] usbhid: USB HID core driver [ 0.954531] Initializing XFRM netlink socket [ 0.954767] NET: Registered PF_INET6 protocol family [ 0.955336] Segment Routing with IPv6 [ 0.955456] In-situ OAM (IOAM) with IPv6 [ 0.955598] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.955843] NET: Registered PF_PACKET protocol family [ 0.955996] 9pnet: Installing 9P2000 support [ 0.956134] Key type dns_resolver registered [ 0.956891] IPI shorthand broadcast: enabled [ 0.957037] sched_clock: Marking stable (920805346, 36047603)->(1803607595, -846754646) [ 0.957601] registered taskstats version 1 [ 0.957717] Loading compiled-in X.509 certificates [ 0.960401] PM: Magic number: 12:740:111 [ 0.960632] printk: console [netcon0] enabled [ 0.960747] netconsole: network logging started [ 0.961092] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.972919] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.973297] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.973962] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.974174] ALSA device list: [ 0.974296] No soundcards found. [ 1.169175] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.185123] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.185263] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.221894] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.222104] ata2: SATA link down (SStatus 0 SControl 300) [ 1.222280] ata1: SATA link down (SStatus 0 SControl 300) [ 1.223167] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.230367] ata4: SATA link down (SStatus 0 SControl 300) [ 1.230516] ata5: SATA link down (SStatus 0 SControl 300) [ 1.230655] ata6: SATA link down (SStatus 0 SControl 300) [ 1.305660] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.305817] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.306192] hub 1-1:1.0: USB hub found [ 1.306409] hub 1-1:1.0: 4 ports detected [ 1.307393] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.307520] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.312779] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.312936] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.313083] usb 3-3: Product: USB2.0 Hub [ 1.313659] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.313812] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.314042] hub 3-3:1.0: USB hub found [ 1.314351] hub 2-1:1.0: USB hub found [ 1.314531] hub 2-1:1.0: 4 ports detected [ 1.314652] hub 3-3:1.0: 4 ports detected [ 1.335467] ata3.00: configured for UDMA/133 [ 1.335919] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.336929] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.337045] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.337334] sd 2:0:0:0: [sda] Write Protect is off [ 1.337457] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.337528] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.337778] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.356459] sda: sda1 sda2 < sda5 > [ 1.356862] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.358130] Freeing unused kernel image (initmem) memory: 1576K [ 1.358264] Write protecting the kernel read-only data: 22528k [ 1.376197] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.377507] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.431104] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.557432] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.557588] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.558284] hub 3-4:1.0: USB hub found [ 1.558503] hub 3-4:1.0: 4 ports detected [ 1.621102] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.698652] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.698807] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.698985] usb 3-3.2: Product: USB2.0 Hub [ 1.699709] hub 3-3.2:1.0: USB hub found [ 1.700142] hub 3-3.2:1.0: 4 ports detected [ 1.837913] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.838040] Run /init as init process [ 1.838166] with arguments: [ 1.838167] /init [ 1.838169] placeholder [ 1.838170] with environment: [ 1.838171] HOME=/ [ 1.838172] TERM=linux [ 1.851098] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.955514] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.955676] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.961560] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 2.014382] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 2.017429] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 2.017761] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.290282] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.290446] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.291030] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.291356] xen: registering gsi 16 triggering 0 polarity 1 [ 2.291371] Already setup the GSI :16 [ 2.295205] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.295369] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.295642] xen: registering gsi 16 triggering 0 polarity 1 [ 2.295651] Already setup the GSI :16 [ 2.323198] pps pps0: new PPS source ptp0 [ 2.323391] igb 0000:07:00.0: added PHC on eth0 [ 2.323525] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.323647] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.323813] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.323929] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.324195] xen: registering gsi 17 triggering 0 polarity 1 [ 2.324204] Already setup the GSI :17 [ 2.353811] pps pps1: new PPS source ptp1 [ 2.354006] igb 0000:08:00.0: added PHC on eth1 [ 2.354159] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.354286] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.354452] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.354568] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.354813] xen: registering gsi 16 triggering 0 polarity 1 [ 2.354821] Already setup the GSI :16 [ 2.413203] igb 0000:0b:00.0: added PHC on eth2 [ 2.413343] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.413464] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.413668] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.413784] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.414010] xen: registering gsi 17 triggering 0 polarity 1 [ 2.414019] Already setup the GSI :17 [ 2.470247] igb 0000:0b:00.1: added PHC on eth3 [ 2.470417] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.470574] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.470821] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.470969] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.471331] xen: registering gsi 18 triggering 0 polarity 1 [ 2.471342] Already setup the GSI :18 [ 2.529321] igb 0000:0b:00.2: added PHC on eth4 [ 2.529494] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.529645] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.529881] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.530025] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.530344] xen: registering gsi 19 triggering 0 polarity 1 [ 2.530356] Already setup the GSI :19 [ 2.588267] igb 0000:0b:00.3: added PHC on eth5 [ 2.588407] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.588529] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.588733] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.588849] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.591951] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.601340] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.611617] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.623271] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 2.631291] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.648577] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 3.026235] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.156406] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.156538] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.453118] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.453575] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.453797] xen: registering gsi 17 triggering 0 polarity 1 [ 3.453807] Already setup the GSI :17 [ 4.194134] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.324523] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.324727] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.621114] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.623568] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.638712] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 5.045513] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.053964] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.688774] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.835678] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.851917] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.930159] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.467103] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.467307] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.467487] device enx0cc47a9f87be entered promiscuous mode [ 15.013620] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 15.223411] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 15.223622] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 15.223746] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 15.224022] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready