[ 0.000000] microcode: microcode updated early to revision 0x42e, date = 2019-03-14 [ 0.000000] Linux version 6.1.0-22-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.94-1 (2024-06-21) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.0-22-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007de2bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1799.955 MHz processor [ 0.000895] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000899] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000910] last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.001050] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001700] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved [ 0.001709] last_pfn = 0x7de2c max_arch_pfn = 0x400000000 [ 0.018927] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] [ 0.018952] Using GB pages for direct mapping [ 0.019421] RAMDISK: [mem 0x33127000-0x3588afff] [ 0.019429] ACPI: Early table checksum verification disabled [ 0.019433] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.019440] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019449] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019457] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.019463] ACPI: FACS 0x000000007E1D8080 000040 [ 0.019467] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.019473] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.019477] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.019483] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.019488] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.019493] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.019498] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.019503] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.019508] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.019513] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.019518] ACPI: DMAR 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.019523] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.019527] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.019529] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.019531] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.019532] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.019534] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.019535] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.019536] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.019538] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.019539] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.019540] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.019542] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.019543] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.019544] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.019546] ACPI: Reserving DMAR table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.019547] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.019617] No NUMA configuration found [ 0.019618] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] [ 0.019635] NODE_DATA(0) allocated [mem 0x27ffd5000-0x27fffffff] [ 0.020087] Zone ranges: [ 0.020088] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.020091] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.020093] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.020095] Device empty [ 0.020097] Movable zone start for each node [ 0.020101] Early memory node ranges [ 0.020102] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.020104] node 0: [mem 0x0000000000100000-0x000000007de2bfff] [ 0.020106] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.020110] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.020118] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.020174] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.028305] On node 0, zone Normal: 8660 pages in unavailable ranges [ 0.028600] ACPI: PM-Timer IO Port: 0x408 [ 0.028611] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.028614] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.028615] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.028617] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.028629] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.028636] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.028639] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028643] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.028650] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028651] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.028658] TSC deadline timer available [ 0.028660] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.028681] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028684] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.028686] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.028687] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.028688] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.028690] PM: hibernation: Registered nosave memory: [mem 0x7de2c000-0x7debafff] [ 0.028692] PM: hibernation: Registered nosave memory: [mem 0x7debb000-0x7dfc3fff] [ 0.028693] PM: hibernation: Registered nosave memory: [mem 0x7dfc4000-0x7e1e0fff] [ 0.028694] PM: hibernation: Registered nosave memory: [mem 0x7e1e1000-0x7f36afff] [ 0.028695] PM: hibernation: Registered nosave memory: [mem 0x7f36b000-0x7f7fffff] [ 0.028696] PM: hibernation: Registered nosave memory: [mem 0x7f800000-0x7fffffff] [ 0.028698] PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff] [ 0.028699] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.028700] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff] [ 0.028701] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff] [ 0.028702] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.028705] [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.028707] Booting paravirtualized kernel on bare hardware [ 0.028710] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.036109] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.036503] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.036511] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.036515] pcpu-alloc: [0] 0 1 2 3 [ 0.036555] Fallback order for Node 0: 0 [ 0.036560] Built 1 zonelists, mobility grouping on. Total pages: 2055603 [ 0.036562] Policy zone: Normal [ 0.036564] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.0-22-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.036633] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.0-22-amd64", will be passed to user space. [ 0.036646] random: crng init done [ 0.037698] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.038269] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.038358] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.038370] software IO TLB: area num 4. [ 0.080385] Memory: 2086428K/8353556K available (14342K kernel code, 2332K rwdata, 9064K rodata, 2796K init, 17404K bss, 305148K reserved, 0K cma-reserved) [ 0.080600] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.080622] Kernel/User page tables isolation: enabled [ 0.080677] ftrace: allocating 40229 entries in 158 pages [ 0.091052] ftrace: allocated 158 pages with 5 groups [ 0.092004] Dynamic Preempt: voluntary [ 0.092048] rcu: Preemptible hierarchical RCU implementation. [ 0.092049] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.092051] Trampoline variant of Tasks RCU enabled. [ 0.092052] Rude variant of Tasks RCU enabled. [ 0.092053] Tracing variant of Tasks RCU enabled. [ 0.092054] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.092055] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.099389] NR_IRQS: 524544, nr_irqs: 864, preallocated irqs: 16 [ 0.099597] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.104151] Console: colour VGA+ 80x25 [ 1.028544] printk: console [ttyS0] enabled [ 1.032751] ACPI: Core revision 20220331 [ 1.037400] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 1.046540] APIC: Switch to symmetric I/O mode setup [ 1.051522] DMAR: Host address width 46 [ 1.055371] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 1.060696] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de [ 1.068618] DMAR: RMRR base: 0x0000007de91000 end: 0x0000007de9dfff [ 1.074885] DMAR: ATSR flags: 0x0 [ 1.078204] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 1.084472] DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0 [ 1.090832] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0 [ 1.097183] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 1.102584] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 1.111729] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 1.117129] x2apic enabled [ 1.119855] Switched APIC routing to cluster x2apic. [ 1.125367] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.150542] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f1ff16e5d, max_idle_ns: 440795296909 ns [ 1.161058] Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.91 BogoMIPS (lpj=7199820) [ 1.165089] CPU0: Thermal monitoring enabled (TM1) [ 1.169142] process: using mwait in idle threads [ 1.173059] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 1.177056] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 1.181059] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.185058] Spectre V2 : Mitigation: Retpolines [ 1.189056] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.193056] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.197056] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 1.201058] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.205057] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 1.209057] MDS: Mitigation: Clear CPU buffers [ 1.213056] MMIO Stale Data: Unknown: No mitigations [ 1.217062] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.221056] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.225056] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.229057] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.233056] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.261706] Freeing SMP alternatives memory: 36K [ 1.265057] pid_max: default: 32768 minimum: 301 [ 1.269091] LSM: Security Framework initializing [ 1.273075] landlock: Up and running. [ 1.277056] Yama: disabled by default; enable with sysctl kernel.yama.* [ 1.281087] AppArmor: AppArmor initialized [ 1.285058] TOMOYO Linux initialized [ 1.289063] LSM support for eBPF active [ 1.293103] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.301071] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.305681] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2403 v2 @ 1.80GHz (family: 0x6, model: 0x3e, stepping: 0x4) [ 1.309246] cblist_init_generic: Setting adjustable number of callback queues. [ 1.313058] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.317088] cblist_init_generic: Setting adjustable number of callback queues. [ 1.321057] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.325079] cblist_init_generic: Setting adjustable number of callback queues. [ 1.329057] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.333078] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 1.337058] ... version: 3 [ 1.341057] ... bit width: 48 [ 1.345056] ... generic registers: 8 [ 1.349056] ... value mask: 0000ffffffffffff [ 1.353056] ... max period: 00007fffffffffff [ 1.357056] ... fixed-purpose events: 3 [ 1.361056] ... event mask: 00000007000000ff [ 1.365290] signal: max sigframe size: 1776 [ 1.369081] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 1.373090] rcu: Hierarchical SRCU implementation. [ 1.377057] rcu: Max phase no-delay instances is 1000. [ 1.381732] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.385151] smp: Bringing up secondary CPUs ... [ 1.389206] x86: Booting SMP configuration: [ 1.393062] .... node #0, CPUs: #1 #2 #3 [ 1.408407] smp: Brought up 1 node, 4 CPUs [ 1.413058] smpboot: Max logical packages: 1 [ 1.417057] smpboot: Total of 4 processors activated (14399.64 BogoMIPS) [ 1.441404] node 0 deferred pages initialised in 20ms [ 1.445502] devtmpfs: initialized [ 1.449138] x86/mm: Memory block size: 128MB [ 1.454108] ACPI: PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 1.457109] ACPI: PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 1.461213] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.465069] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.469118] pinctrl core: initialized pinctrl subsystem [ 1.473972] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.477338] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 1.481211] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.485211] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.489066] audit: initializing netlink subsys (disabled) [ 1.493072] audit: type=2000 audit(1719738200.404:1): state=initialized audit_enabled=0 res=1 [ 1.493208] thermal_sys: Registered thermal governor 'fair_share' [ 1.497060] thermal_sys: Registered thermal governor 'bang_bang' [ 1.501057] thermal_sys: Registered thermal governor 'step_wise' [ 1.505057] thermal_sys: Registered thermal governor 'user_space' [ 1.509057] thermal_sys: Registered thermal governor 'power_allocator' [ 1.513074] cpuidle: using governor ladder [ 1.521062] cpuidle: using governor menu [ 1.525032] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 1.525058] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.529161] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 1.533059] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 1.537066] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 1.541515] PCI: Using configuration type 1 for base access [ 1.545154] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 1.550397] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.553103] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 1.557059] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 1.565058] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 1.573056] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 1.577222] ACPI: Added _OSI(Module Device) [ 1.581062] ACPI: Added _OSI(Processor Device) [ 1.585058] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.593058] ACPI: Added _OSI(Processor Aggregator Device) [ 1.712315] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.744206] ACPI: Interpreter enabled [ 1.745079] ACPI: PM: (supports S0 S1 S4 S5) [ 1.749057] ACPI: Using IOAPIC for interrupt routing [ 1.757166] HEST: Table parsing has been initialized. [ 1.761182] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 1.765061] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.777057] PCI: Using E820 reservations for host bridge windows [ 1.781607] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.789167] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PRAD], AE_NOT_FOUND (20220331/psargs-330) [ 1.793060] ACPI Error: Aborting method \_GPE._L24 due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 1.797062] ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_L24] (20220331/evgpe-511) [ 1.801055] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.805055] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.813152] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR] [ 1.821213] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability] [ 1.829058] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.837418] PCI host bridge to bus 0000:00 [ 1.841059] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.849057] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.857057] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.861057] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.869057] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 1.877057] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.885057] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.893057] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.901057] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.905088] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.909140] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.917183] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.925157] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.929225] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.937155] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.941225] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.949095] pci 0000:00:03.0: enabling Extended Tags [ 1.953122] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.961211] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.965074] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.973203] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.977073] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.985195] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 1.993073] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 1.997192] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 2.005073] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 2.009194] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 2.017073] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 2.025192] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 2.029073] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 2.037193] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 2.041076] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 2.049193] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 2.057073] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 2.061191] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 2.069187] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 2.073181] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 2.081069] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 2.089208] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 2.093178] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 2.101201] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 2.105077] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 2.113132] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 2.117149] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 2.125077] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 2.133132] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 2.137161] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 2.145073] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 2.149148] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.157163] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 2.161156] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.169087] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 2.173058] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 2.181173] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 2.185157] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.193083] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 2.197058] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 2.205172] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 2.209073] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 2.217148] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.221160] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.229208] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 2.233274] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 2.241070] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 2.245063] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 2.253063] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 2.257063] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 2.265063] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 2.269064] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 2.273101] pci 0000:00:1f.2: PME# supported from D3hot [ 2.281149] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 2.285075] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 2.293080] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 2.297134] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 2.305077] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 2.313220] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.317108] pci 0000:00:01.1: PCI bridge to [bus 02] [ 2.321107] pci 0000:00:03.0: PCI bridge to [bus 03] [ 2.325140] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 2.333079] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 2.341071] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 2.349066] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 2.353083] pci 0000:04:00.0: enabling Extended Tags [ 2.357163] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 2.365057] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 2.377313] pci 0000:00:11.0: PCI bridge to [bus 04] [ 2.381060] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 2.385065] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 2.393155] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 2.401092] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 2.409094] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 2.413075] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 2.417246] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 2.425278] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 2.429060] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 2.437059] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 2.445157] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 2.449092] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 2.457094] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 2.461075] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 2.469243] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 2.473273] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 2.477060] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 2.485059] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 2.493079] pci_bus 0000:07: extended config space not accessible [ 2.497082] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 2.505073] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 2.509065] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 2.517065] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 2.525104] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.533169] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 2.537061] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 2.545063] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 2.553057] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 2.561057] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 2.569057] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 2.577057] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 2.589057] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 2.597057] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 2.605057] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 2.613057] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 2.625856] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 2.629062] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.641076] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 2.649057] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 2.657125] PCI host bridge to bus 0000:ff [ 2.661058] pci_bus 0000:ff: root bus resource [bus ff] [ 2.665071] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 2.673137] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 2.677126] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 2.685118] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 2.689117] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 2.697120] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 2.705124] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 2.709115] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 2.717116] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 2.721115] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 2.729118] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 2.733115] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 2.741118] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 2.745120] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 2.753134] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 2.757146] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 2.765141] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 2.769140] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 2.777139] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 2.781139] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 2.789142] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 2.793141] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 2.801148] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 2.805141] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 2.813140] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 2.817140] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 2.825146] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 2.829141] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 2.837139] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 2.841117] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 2.849122] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 2.853118] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 2.861120] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 2.869117] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 2.873115] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 2.881277] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 2.885110] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 2.893108] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 2.897108] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 2.905108] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 2.909108] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 2.917119] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 2.921108] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 2.930680] iommu: Default domain type: Translated [ 2.933058] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.941148] pps_core: LinuxPPS API ver. 1 registered [ 2.945057] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.953060] PTP clock support registered [ 2.956996] EDAC MC: Ver: 3.0.0 [ 2.961323] NetLabel: Initializing [ 2.964730] NetLabel: domain hash size = 128 [ 2.969059] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 2.977079] NetLabel: unlabeled traffic allowed by default [ 2.981057] PCI: Using ACPI for IRQ routing [ 2.992056] PCI: pci_cache_line_size set to 64 bytes [ 2.992182] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] [ 2.992185] e820: reserve RAM buffer [mem 0x7de2c000-0x7fffffff] [ 2.993100] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 2.997055] pci 0000:07:01.0: vgaarb: bridge control possible [ 2.997055] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.013064] vgaarb: loaded [ 3.017787] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 3.025057] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 3.033057] clocksource: Switched to clocksource tsc-early [ 3.038743] VFS: Disk quotas dquot_6.6.0 [ 3.042691] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.049762] AppArmor: AppArmor Filesystem Enabled [ 3.054495] pnp: PnP ACPI init [ 3.057708] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 3.064326] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 3.070935] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 3.077548] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 3.084290] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 3.091397] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 3.097319] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 3.104601] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 3.110726] pnp 00:07: [dma 0 disabled] [ 3.110968] pnp 00:08: [dma 0 disabled] [ 3.111251] system 00:09: [io 0x0400-0x0453] has been reserved [ 3.117174] system 00:09: [io 0x0458-0x047f] has been reserved [ 3.123092] system 00:09: [io 0x1180-0x119f] has been reserved [ 3.129011] system 00:09: [io 0x0500-0x057f] has been reserved [ 3.134932] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 3.141544] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 3.148507] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 3.155224] system 00:0a: [io 0x0454-0x0457] has been reserved [ 3.161431] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 3.168669] pnp: PnP ACPI: found 12 devices [ 3.179393] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.188364] NET: Registered PF_INET protocol family [ 3.193424] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 3.203758] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 3.212329] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.220165] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 3.228468] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 3.236262] TCP: Hash tables configured (established 65536 bind 65536) [ 3.242892] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 3.250444] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.257271] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.264556] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.270230] NET: Registered PF_XDP protocol family [ 3.275042] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.280023] pci 0000:00:01.1: PCI bridge to [bus 02] [ 3.284995] pci 0000:00:03.0: PCI bridge to [bus 03] [ 3.289973] pci 0000:00:11.0: PCI bridge to [bus 04] [ 3.294938] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 3.301040] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.308786] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 3.313753] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 3.319850] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 3.326639] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 3.331607] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 3.337703] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 3.344493] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 3.349462] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 3.356249] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.363992] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 3.370174] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 3.376353] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 3.382532] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 3.388712] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.395585] pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.402457] pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.409418] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.416378] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 3.421951] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.429170] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 3.434741] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 3.441009] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 3.446580] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 3.452848] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 3.459112] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.466333] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 3.472512] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 3.478691] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 3.484870] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 3.491050] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.497924] pci_bus 0000:07: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.504797] pci_bus 0000:07: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.511755] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.518811] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 3.549543] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 23112 usecs [ 3.581529] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 23991 usecs [ 3.589034] PCI: CLS 64 bytes, default 64 [ 3.593086] DMAR: No SATC found [ 3.593119] Trying to unpack rootfs image as initramfs... [ 3.596233] DMAR: dmar0: Using Queued invalidation [ 3.596314] pci 0000:00:00.0: Adding to iommu group 0 [ 3.611547] pci 0000:00:01.0: Adding to iommu group 1 [ 3.616624] pci 0000:00:01.1: Adding to iommu group 2 [ 3.621708] pci 0000:00:03.0: Adding to iommu group 3 [ 3.626793] pci 0000:00:04.0: Adding to iommu group 4 [ 3.631873] pci 0000:00:04.1: Adding to iommu group 5 [ 3.636950] pci 0000:00:04.2: Adding to iommu group 6 [ 3.642030] pci 0000:00:04.3: Adding to iommu group 7 [ 3.647106] pci 0000:00:04.4: Adding to iommu group 8 [ 3.652185] pci 0000:00:04.5: Adding to iommu group 9 [ 3.657267] pci 0000:00:04.6: Adding to iommu group 10 [ 3.662428] pci 0000:00:04.7: Adding to iommu group 11 [ 3.667597] pci 0000:00:05.0: Adding to iommu group 12 [ 3.672759] pci 0000:00:05.2: Adding to iommu group 13 [ 3.677930] pci 0000:00:05.4: Adding to iommu group 14 [ 3.683101] pci 0000:00:11.0: Adding to iommu group 15 [ 3.688288] pci 0000:00:16.0: Adding to iommu group 16 [ 3.693460] pci 0000:00:16.1: Adding to iommu group 16 [ 3.698631] pci 0000:00:1a.0: Adding to iommu group 17 [ 3.703803] pci 0000:00:1c.0: Adding to iommu group 18 [ 3.708974] pci 0000:00:1c.1: Adding to iommu group 19 [ 3.714135] pci 0000:00:1d.0: Adding to iommu group 20 [ 3.719304] pci 0000:00:1e.0: Adding to iommu group 21 [ 3.724514] pci 0000:00:1f.0: Adding to iommu group 22 [ 3.729686] pci 0000:00:1f.2: Adding to iommu group 22 [ 3.734848] pci 0000:00:1f.3: Adding to iommu group 22 [ 3.740016] pci 0000:00:1f.6: Adding to iommu group 22 [ 3.745191] pci 0000:04:00.0: Adding to iommu group 23 [ 3.750355] pci 0000:05:00.0: Adding to iommu group 24 [ 3.755522] pci 0000:06:00.0: Adding to iommu group 25 [ 3.760668] pci 0000:07:01.0: Adding to iommu group 21 [ 3.765851] pci 0000:ff:08.0: Adding to iommu group 26 [ 3.771027] pci 0000:ff:09.0: Adding to iommu group 27 [ 3.776235] pci 0000:ff:0a.0: Adding to iommu group 28 [ 3.781404] pci 0000:ff:0a.1: Adding to iommu group 28 [ 3.786574] pci 0000:ff:0a.2: Adding to iommu group 28 [ 3.791744] pci 0000:ff:0a.3: Adding to iommu group 28 [ 3.796939] pci 0000:ff:0b.0: Adding to iommu group 29 [ 3.802111] pci 0000:ff:0b.3: Adding to iommu group 29 [ 3.807306] pci 0000:ff:0c.0: Adding to iommu group 30 [ 3.812475] pci 0000:ff:0c.1: Adding to iommu group 30 [ 3.817673] pci 0000:ff:0d.0: Adding to iommu group 31 [ 3.822839] pci 0000:ff:0d.1: Adding to iommu group 31 [ 3.828026] pci 0000:ff:0e.0: Adding to iommu group 32 [ 3.833198] pci 0000:ff:0e.1: Adding to iommu group 32 [ 3.838370] pci 0000:ff:0f.0: Adding to iommu group 33 [ 3.843531] pci 0000:ff:0f.1: Adding to iommu group 34 [ 3.848697] pci 0000:ff:0f.2: Adding to iommu group 35 [ 3.853865] pci 0000:ff:0f.3: Adding to iommu group 36 [ 3.859031] pci 0000:ff:0f.4: Adding to iommu group 37 [ 3.864194] pci 0000:ff:0f.5: Adding to iommu group 38 [ 3.869362] pci 0000:ff:10.0: Adding to iommu group 39 [ 3.874533] pci 0000:ff:10.1: Adding to iommu group 40 [ 3.879701] pci 0000:ff:10.2: Adding to iommu group 41 [ 3.884865] pci 0000:ff:10.3: Adding to iommu group 42 [ 3.890029] pci 0000:ff:10.4: Adding to iommu group 43 [ 3.895197] pci 0000:ff:10.5: Adding to iommu group 44 [ 3.900361] pci 0000:ff:10.6: Adding to iommu group 45 [ 3.905539] pci 0000:ff:10.7: Adding to iommu group 46 [ 3.910758] pci 0000:ff:13.0: Adding to iommu group 47 [ 3.915935] pci 0000:ff:13.1: Adding to iommu group 47 [ 3.921108] pci 0000:ff:13.4: Adding to iommu group 47 [ 3.926281] pci 0000:ff:13.5: Adding to iommu group 47 [ 3.931485] pci 0000:ff:16.0: Adding to iommu group 48 [ 3.936656] pci 0000:ff:16.1: Adding to iommu group 48 [ 3.941832] pci 0000:ff:16.2: Adding to iommu group 48 [ 3.950894] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 3.957344] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.963784] software IO TLB: mapped [mem 0x0000000079e2c000-0x000000007de2c000] (64MB) [ 3.972282] Initialise system trusted keyrings [ 3.976748] Key type blacklist registered [ 3.980845] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 3.989166] zbud: loaded [ 3.992027] integrity: Platform Keyring initialized [ 3.996923] integrity: Machine keyring initialized [ 4.001722] Key type asymmetric registered [ 4.005818] Asymmetric key parser 'x509' registered [ 4.037675] Freeing initrd memory: 40336K [ 4.048904] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 4.054687] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 4.062127] io scheduler mq-deadline registered [ 4.069101] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.075919] Monitor-Mwait will be used to enter C-1 state [ 4.075933] Monitor-Mwait will be used to enter C-2 state [ 4.075939] ACPI: \_SB_.SCK0.C000: Found 2 idle states [ 4.086108] ERST: Error Record Serialization Table (ERST) support is initialized. [ 4.093602] pstore: Registered erst as persistent store backend [ 4.099683] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.106114] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.114222] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.122455] Linux agpgart interface v0.103 [ 4.126685] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 4.135825] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 4.142706] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 4.152568] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.157547] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.162794] mousedev: PS/2 mouse device common for all mice [ 4.168408] rtc_cmos 00:02: RTC can wake from S4 [ 4.173329] rtc_cmos 00:02: registered as rtc0 [ 4.177813] rtc_cmos 00:02: setting system clock to 2024-06-30T09:03:25 UTC (1719738205) [ 4.185938] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.193739] intel_pstate: Intel P-state driver initializing [ 4.199595] ledtrig-cpu: registered to indicate activity on CPUs [ 4.223997] NET: Registered PF_INET6 protocol family [ 4.236889] Segment Routing with IPv6 [ 4.240580] In-situ OAM (IOAM) with IPv6 [ 4.244545] mip6: Mobile IPv6 [ 4.247524] NET: Registered PF_PACKET protocol family [ 4.252671] mpls_gso: MPLS GSO support [ 4.256912] microcode: sig=0x306e4, pf=0x8, revision=0x42e [ 4.262453] microcode: Microcode Update Driver: v2.2. [ 4.262461] IPI shorthand broadcast: enabled [ 4.271822] sched_clock: Marking stable (3282356279, 989425998)->(4639053296, -367271019) [ 4.280241] registered taskstats version 1 [ 4.284359] Loading compiled-in X.509 certificates [ 4.329106] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.337832] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 4.348488] zswap: loaded using pool lzo/zbud [ 4.353076] Key type .fscrypt registered [ 4.357002] Key type fscrypt-provisioning registered [ 4.362269] pstore: Using crash dump compression: deflate [ 4.375337] Key type encrypted registered [ 4.379377] AppArmor: AppArmor sha1 policy hashing enabled [ 4.384876] ima: No TPM chip found, activating TPM-bypass! [ 4.390358] ima: Allocated hash algorithm: sha256 [ 4.395076] ima: No architecture policies found [ 4.399616] evm: Initialising EVM extended attributes: [ 4.404751] evm: security.selinux [ 4.408071] evm: security.SMACK64 (disabled) [ 4.412344] evm: security.SMACK64EXEC (disabled) [ 4.416962] evm: security.SMACK64TRANSMUTE (disabled) [ 4.422016] evm: security.SMACK64MMAP (disabled) [ 4.426634] evm: security.apparmor [ 4.430041] evm: security.ima [ 4.433011] evm: security.capability [ 4.436585] evm: HMAC attrs: 0x1 [ 4.620443] clk: Disabling unused clocks [ 4.626074] Freeing unused decrypted memory: 2036K [ 4.631584] Freeing unused kernel image (initmem) memory: 2796K [ 4.637575] Write protecting the kernel read-only data: 26624k [ 4.644146] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 4.651103] Freeing unused kernel image (rodata/data gap) memory: 1176K [ 4.745377] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.751817] x86/mm: Checking user space page tables [ 4.832791] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.839234] Run /init as init process [ 4.842896] with arguments: [ 4.842898] /init [ 4.842899] with environment: [ 4.842900] HOME=/ [ 4.842901] TERM=linux [ 4.842903] BOOT_IMAGE=/vmlinuz-6.1.0-22-amd64 [ 4.989458] tsc: Refined TSC clocksource calibration: 1799.999 MHz [ 4.995657] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 5.005692] clocksource: Switched to clocksource tsc [ 5.036405] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 5.046901] i2c i2c-0: 1/6 memory slots populated (from DMI) [ 5.052572] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 5.075726] e1000e: Intel(R) PRO/1000 Network Driver [ 5.080711] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 5.088279] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.103734] SCSI subsystem initialized [ 5.103763] ACPI: bus type USB registered [ 5.114049] usbcore: registered new interface driver usbfs [ 5.119586] usbcore: registered new interface driver hub [ 5.124927] usbcore: registered new device driver usb [ 5.144686] libata version 3.00 loaded. [ 5.145661] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.150914] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.158996] ehci-pci 0000:00:1a.0: debug port 2 [ 5.161292] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 5.169477] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 5.177113] ahci 0000:00:1f.2: version 3.0 [ 5.187384] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 5.189461] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.195570] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 5.201389] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.217578] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.221779] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a6 [ 5.224805] usb usb1: Product: EHCI Host Controller [ 5.232723] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 5.237594] usb usb1: Manufacturer: Linux 6.1.0-22-amd64 ehci_hcd [ 5.244548] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.250560] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.257524] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.262067] hub 1-0:1.0: USB hub found [ 5.266898] scsi host0: ahci [ 5.267224] scsi host1: ahci [ 5.267517] scsi host2: ahci [ 5.267793] scsi host3: ahci [ 5.268069] scsi host4: ahci [ 5.268344] scsi host5: ahci [ 5.268406] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 32 [ 5.268410] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 32 [ 5.268413] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 32 [ 5.268416] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 32 [ 5.268418] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 32 [ 5.268421] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 32 [ 5.327779] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 5.329229] hub 1-0:1.0: 2 ports detected [ 5.348615] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 5.348644] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.355074] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 5.360286] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.374369] ehci-pci 0000:00:1d.0: debug port 2 [ 5.383522] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 5.384793] isci 0000:04:00.0: OEM parameter table found in OROM [ 5.394550] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a7 [ 5.395190] isci 0000:04:00.0: OEM SAS parameters (version: 1.0) loaded (platform) [ 5.403104] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 5.405454] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.405524] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.405528] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.405530] usb usb2: Product: EHCI Host Controller [ 5.405532] usb usb2: Manufacturer: Linux 6.1.0-22-amd64 ehci_hcd [ 5.405534] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.405863] hub 2-0:1.0: USB hub found [ 5.405874] hub 2-0:1.0: 2 ports detected [ 5.417680] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 5.423365] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.434360] scsi host6: isci [ 5.588396] ata2: SATA link down (SStatus 0 SControl 300) [ 5.593833] ata3: SATA link down (SStatus 0 SControl 300) [ 5.599274] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.605491] ata6: SATA link down (SStatus 0 SControl 300) [ 5.605700] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.610925] ata5: SATA link down (SStatus 0 SControl 300) [ 5.622862] ata4: SATA link down (SStatus 0 SControl 300) [ 5.628364] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 5.635538] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.644144] ata1.00: configured for UDMA/133 [ 5.648489] scsi: waiting for bus probes to complete ... [ 5.677482] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.773831] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.782029] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.789877] hub 1-1:1.0: USB hub found [ 5.793744] hub 1-1:1.0: 6 ports detected [ 5.837831] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.846021] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.853879] hub 2-1:1.0: USB hub found [ 5.857744] hub 2-1:1.0: 8 ports detected [ 5.901695] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 5.912215] e1000e 0000:05:00.0 enx002590eb25a6: renamed from eth0 [ 5.936342] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.944027] sd 0:0:0:0: [sda] Write Protect is off [ 5.948852] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.948951] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.953897] e1000e 0000:06:00.0 enx002590eb25a7: renamed from eth1 [ 5.958019] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 5.992387] sda: sda1 sda2 < sda5 > [ 5.996278] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.085478] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 6.199561] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 6.207958] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.215282] usb 1-1.1: Product: Hermon USB hidmouse Device [ 6.220782] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 6.242087] hid: raw HID events driver (C) Jiri Kosina [ 6.255114] usbcore: registered new interface driver usbhid [ 6.260714] usbhid: USB HID core driver [ 6.268064] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input3 [ 6.282882] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 6.297797] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input4 [ 6.369750] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 6.400073] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.412309] device-mapper: uevent: version 1.0.3 [ 6.417058] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 7.139858] PM: Image not found (code -22) [ 7.508460] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 7.519972] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 7.679601] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 9.401635] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 9.426420] ACPI: button: Power Button [PWRB] [ 9.430906] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 9.438443] ACPI: button: Power Button [PWRF] [ 9.492060] dca service started, version 1.12.1 [ 9.582874] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 9.590629] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 9.681027] IPMI message handler: version 39.2 [ 9.687532] ipmi device interface [ 9.716532] ipmi_si: IPMI System Interface driver [ 9.721303] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 9.727686] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 9.735186] ipmi_si: Adding SMBIOS-specified kcs state machine [ 9.741710] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 9.747862] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 9.779119] iTCO_vendor_support: vendor-support=0 [ 9.867279] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.867534] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 9.872623] ACPI: bus type drm_connector registered [ 9.881298] ipmi_si: Adding ACPI-specified kcs state machine [ 9.881385] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 9.934077] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 9.942037] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 9.947802] RAPL PMU: hw unit of domain package 2^-16 Joules [ 9.953470] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 9.971286] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 10.005620] cryptd: max_cpu_qlen set to 1000 [ 10.047744] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 10.095841] AVX version of gcm_enc/dec engaged. [ 10.100452] AES CTR mode by8 optimization enabled [ 10.130011] mgag200 0000:07:01.0: vgaarb: deactivate vga console [ 10.141037] Console: switching to colour dummy device 80x25 [ 10.152462] [drm] Initialized mgag200 1.0.0 20110418 for 0000:07:01.0 on minor 0 [ 10.161671] fbcon: mgag200drmfb (fb0) is primary device [ 10.185644] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 10.300061] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x0703, dev_id: 0x20) [ 10.338188] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 10.533399] Console: switching to colour frame buffer device 128x48 [ 10.577459] ipmi_ssif: IPMI SSIF Interface driver [ 10.643026] mgag200 0000:07:01.0: [drm] fb0: mgag200drmfb frame buffer device [ 11.290324] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 11.290351] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 11.290358] EDAC sbridge: Seeking for: PCI ID 8086:0e60 [ 11.290367] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 11.290375] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 11.290379] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 11.290387] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 11.290391] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 11.290399] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 11.290403] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 11.290411] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 11.290414] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 11.290423] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 11.290426] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 11.290435] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 11.290438] EDAC sbridge: Seeking for: PCI ID 8086:0e68 [ 11.290446] EDAC sbridge: Seeking for: PCI ID 8086:0e79 [ 11.290453] EDAC sbridge: Seeking for: PCI ID 8086:0e6a [ 11.290461] EDAC sbridge: Seeking for: PCI ID 8086:0e6b [ 11.290469] EDAC sbridge: Seeking for: PCI ID 8086:0e6c [ 11.290477] EDAC sbridge: Seeking for: PCI ID 8086:0e6d [ 11.290484] EDAC sbridge: Seeking for: PCI ID 8086:0eb8 [ 11.290492] EDAC sbridge: Seeking for: PCI ID 8086:0ebc [ 11.290500] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 11.290510] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 11.290512] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 11.290521] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 11.290523] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 11.290534] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 11.290672] EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT) [ 11.301727] EDAC sbridge: Ver: 1.1.2 [ 11.406431] intel_rapl_common: Found RAPL domain package [ 11.411762] intel_rapl_common: Found RAPL domain core [ 11.416822] intel_rapl_common: Found RAPL domain dram [ 12.468162] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 13.537501] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 13.567852] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 13.624439] Adding 1949692k swap on /dev/mapper/fiano1--vg-swap_1. Priority:-2 extents:1 across:1949692k FS [ 14.182150] audit: type=1400 audit(1719738215.144:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1066 comm="apparmor_parser" [ 14.198328] audit: type=1400 audit(1719738215.152:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1067 comm="apparmor_parser" [ 14.213724] audit: type=1400 audit(1719738215.156:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1067 comm="apparmor_parser" [ 14.246251] audit: type=1400 audit(1719738215.208:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1069 comm="apparmor_parser" [ 14.261652] audit: type=1400 audit(1719738215.208:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1069 comm="apparmor_parser" [ 14.276610] audit: type=1400 audit(1719738215.208:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1069 comm="apparmor_parser" [ 14.437323] audit: type=1400 audit(1719738215.396:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=1071 comm="apparmor_parser" [ 14.452621] audit: type=1400 audit(1719738215.408:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1068 comm="apparmor_parser" [ 14.470627] audit: type=1400 audit(1719738215.412:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1068 comm="apparmor_parser" [ 14.489532] audit: type=1400 audit(1719738215.416:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1068 comm="apparmor_parser" [ 17.638526] e1000e 0000:05:00.0 enx002590eb25a6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 17.648458] IPv6: ADDRCONF(NETDEV_CHANGE): enx002590eb25a6: link becomes ready