Jun 29 19:31:18.530109 [ 17.566310] usb 2-3.2.4: Manufacturer: ASIX Elec. Corp. Jun 29 19:31:18.540421 [ 17.571559] usb 2-3.2.4: SerialNumber: 000001 Jun 29 19:31:18.540421 [ 17.626409] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 29 19:31:18.602970 [ 17.734246] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 29 19:31:18.712590 [ 17.842168] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 29 19:31:18.820560 [ 17.950218] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 29 19:31:18.928610 [ 17.957852] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 29 19:31:18.928679 [ 18.164632] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 29 19:31:19.144495 [ 18.843893] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 29 19:31:19.816647 [ 18.859442] Asix Electronics AX88772A usb-002:004:10: attached PHY driver (mii_bus:phy_addr=usb-002:004:10, irq=POLL) Jun 29 19:31:19.840606 [ 18.873305] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 86:bf:39:c8:01:19 Jun 29 19:31:19.852607 [ 18.885622] usbcore: registered new interface driver asix Jun 29 19:31:19.852669 done. Jun 29 19:31:20.156556 [ 19.657733] EXT4-fs (dm-0): re-mounted. Quota mode: none. Jun 29 19:31:20.624595 Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). Jun 29 19:31:20.660532 Checking file systems.../dev/sda1: clean, 922/61056 files, 25374/243968 blocks Jun 29 19:31:21.756416 done. Jun 29 19:31:21.804382 Cleaning up temporary files... /tmp. Jun 29 19:31:22.128396 [ 21.425562] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 29 19:31:22.392594 [ 21.477639] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Jun 29 19:31:22.452403 [ 21.716201] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k FS Jun 29 19:31:22.696397 Mounting local filesystems...done. Jun 29 19:31:23.044530 Activating swapfile swap, if any...done. Jun 29 19:31:23.044593 Cleaning up temporary files.... Jun 29 19:31:23.092404 Starting Setting kernel variables: sysctl. Jun 29 19:31:23.284425 [ 22.933580] audit: type=1400 audit(1719689483.924:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=901 comm="apparmor_parser" Jun 29 19:31:23.912430 [ 22.947512] audit: type=1400 audit(1719689483.932:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=902 comm="apparmor_parser" Jun 29 19:31:23.924463 [ 22.962492] audit: type=1400 audit(1719689483.932:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=902 comm="apparmor_parser" Jun 29 19:31:23.948390 [ 23.053428] asix 2-3.2.4:1.0 eth0: configuring for phy/internal link mode Jun 29 19:31:24.024409 [ 23.307397] audit: type=1400 audit(1719689484.300:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=939 comm="apparmor_parser" Jun 29 19:31:24.291681 [ 23.327522] audit: type=1400 audit(1719689484.316:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=939 comm="apparmor_parser" Jun 29 19:31:24.304478 [ 23.341004] audit: type=1400 audit(1719689484.320:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=939 comm="apparmor_parser" Jun 29 19:31:24.316535 [ 23.651718] audit: type=1400 audit(1719689484.644:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=938 comm="apparmor_parser" Jun 29 19:31:24.640618 [ 23.668231] audit: type=1400 audit(1719689484.648:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=938 comm="apparmor_parser" Jun 29 19:31:24.652689 [ 23.685466] audit: type=1400 audit(1719689484.652:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=938 comm="apparmor_parser" Jun 29 19:31:24.664654 [ 23.818874] audit: type=1400 audit(1719689484.812:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=938 comm="apparmor_parser" Jun 29 19:31:24.796626 Starting: AppArmorLoading AppArmor profiles...done. Jun 29 19:31:24.856597 . Jun 29 19:31:24.856647 [ 25.222950] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 29 19:31:26.192624 [ 25.228999] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jun 29 19:31:26.204534 Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1 Jun 29 19:31:27.892653 Copyright 2004-2022 Internet Systems Consortium. Jun 29 19:31:27.904492 All rights reserved. Jun 29 19:31:27.904492 For info, please visit https://www.isc.org/software/dhcp/ Jun 29 19:31:27.904492 Jun 29 19:31:27.904492 Listening on LPF/eth0/9e:04:00:59:64:5a Jun 29 19:31:27.904492 Sending on LPF/eth0/9e:04:00:59:64:5a Jun 29 19:31:27.916638 Sending on Socket/fallback Jun 29 19:31:27.916699 Created duid "\000\001\000\001.\023\035\214\236\004\000YdZ". Jun 29 19:31:27.916746 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 Jun 29 19:31:27.928583 [ 28.896531] exynos-mixer 14450000.mixer: deferred probe timeout, ignoring dependency Jun 29 19:31:29.868679 [ 28.908224] exynos4-fb 14400000.fimd: deferred probe timeout, ignoring dependency Jun 29 19:31:29.880646 [ 28.916614] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations Jun 29 19:31:29.892629 [ 28.923015] exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm]) Jun 29 19:31:29.892696 [ 28.931429] exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm]) Jun 29 19:31:29.904635 [ 28.941464] exynos-drm exynos-drm: bound 14500000.dsi (ops hdmi_enable [exynosdrm]) Jun 29 19:31:29.920636 [ 28.948141] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm]) Jun 29 19:31:29.920703 [ 28.967455] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Jun 29 19:31:29.944617 [ 28.972677] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Jun 29 19:31:29.944681 [ 28.981687] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 Jun 29 19:31:29.956572 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 18 Jun 29 19:31:30.256634 DHCPOFFER of 10.149.64.44 from 10.149.64.4 Jun 29 19:31:30.256692 DHCPREQUEST for 10.149.64.44 on eth0 to 255.255.255.255 port 67 Jun 29 19:31:30.256741 DHCPACK of 10.149.64.44 from 10.149.64.4 Jun 29 19:31:30.268603 bound to 10.149.64.44 -- renewal in 267 seconds. Jun 29 19:31:30.268662 done. Jun 29 19:31:30.268701 Cleaning up temporary files.... Jun 29 19:31:30.316568 Starting nftables: none Jun 29 19:31:30.424576 . Jun 29 19:31:30.856562 INIT: Entering runlevel: 2 Jun 29 19:31:30.904517 Using makefile-style concurrent boot in runlevel 2. Jun 29 19:31:30.952585 Starting Apache httpd web server: apache2. Jun 29 19:31:32.824596 Starting NTP server: ntpd2024-06-29T19:31:33 ntpd[1129]: INIT: ntpd ntpsec-1.2.2: Starting Jun 29 19:31:33.266806 2024-06-29T19:31:33 ntpd[1129]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 29 19:31:33.268543 . Jun 29 19:31:33.268593 Starting periodic command scheduler: cron. Jun 29 19:31:33.400579 Starting system message bus: dbus. Jun 29 19:31:33.472568 Starting OpenBSD Secure Shell server: sshd. Jun 29 19:31:34.292593 Jun 29 19:31:35.360596 Debian GNU/Linux 12 arndale-metrocentre ttySAC2 Jun 29 19:31:35.360658 Jun 29 19:31:35.360695 arndale-metrocentre login: INIT: Switching to r INIT: No inittab.d directorUsing makefile-style concurrent boot in runlevel 6. Jun 29 19:36:43.321865 Stopping nftables: none. Jun 29 19:36:43.381726 Stopping SMP IRQ Balancer: irqbalance. Jun 29 19:36:43.393594 Stopping hotplug events dispatcher: systemd-udevd. Jun 29 19:36:43.429624 Saving the system clock to /dev/rtc0. Jun 29 19:36:44.125787 Hardware Clock updated to Sat Jun 29 19:36:44 UTC 2024. Jun 29 19:36:44.137729 Stopping Apache httpd web server: apache2. Jun 29 19:36:44.545831 Asking all remaining processes to terminate...done. Jun 29 19:36:45.049735 All processes ended within 1 seconds...done. Jun 29 19:36:45.049796 Deconfiguring network interfaces...ifdown: ignoring unknown interface eth0=eth0 Jun 29 19:36:45.169744 done. Jun 29 19:36:45.169795 [ 344.376601] EXT4-fs (sda1): unmounting filesystem. Jun 29 19:36:45.337773 Deactivating swap...done. Jun 29 19:36:45.409702 Unmounting local filesystems...done. Jun 29 19:36:45.421686 [ 344.740869] EXT4-fs (dm-0): re-mounted. Quota mode: none. Jun 29 19:36:45.713663 Will now restart. Jun 29 19:36:46.037739 [ 345.087852] asix 2-3.2.4:1.0 eth0: Link is Down Jun 29 19:36:46.049665 [ 345.130106] sd 0:0:0:0: [sda] Synchronizing SCSI cache Jun 29 19:36:46.097737 [ 345.158136] wake enabled for irq 101 (gpx1-4) Jun 29 19:36:46.121732 [ 345.161026] wake enabled for irq 102 (gpx1-5) Jun 29 19:36:46.133820 [ 345.165390] wake enabled for irq 103 (gpx1-6) Jun 29 19:36:46.133885 [ 345.169724] wake enabled for irq 104 (gpx1-7) Jun 29 19:36:46.133931 [ 345.174062] wake enabled for irq 105 (gpx2-0) Jun 29 19:36:46.145730 [ 345.178401] wake enabled for irq 106 (gpx2-1) Jun 29 19:36:46.145789 [ 345.183293] reboot: Reó Jun 29 19:36:46.481749 Jun 29 19:36:46.481780 Jun 29 19:36:46.481851 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 29 19:36:46.493737 Jun 29 19:36:46.493787 CPU: Exynos5250@1000MHz Jun 29 19:36:46.493830 Jun 29 19:36:46.493866 Board: Arndale Jun 29 19:36:46.493905 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 29 19:36:46.493951 ready Jun 29 19:36:46.493988 DRAM: 2 GiB Jun 29 19:36:46.494026 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 29 19:36:46.517730 trace: enabled Jun 29 19:36:46.553684 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 29 19:36:46.913761 i2c_init: failed to init bus 0 for speed = 100000 Jun 29 19:36:46.973735 In: serial Jun 29 19:36:46.973788 Out: serial Jun 29 19:36:46.973828 Err: serial Jun 29 19:36:46.973866 SCSI: ARNDALE SCSI INIT Jun 29 19:36:46.973906 Target spinup took 0 ms. Jun 29 19:36:46.985747 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 29 19:36:46.985807 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 29 19:36:46.997742 Net: Net Initialization Skipped Jun 29 19:36:46.997799 No ethernet found. Jun 29 19:36:46.997839 Hostname: arndale-metrocentre Jun 29 19:36:46.997881 Hit any key to stop autoboot: 2  1  0 Jun 29 19:36:48.917686 (Re)start USB... Jun 29 19:36:48.917746 USB0: USB EHCI 1.00 Jun 29 19:36:48.929596 scanning bus 0 for devices... 4 USB Device(s) found Jun 29 19:36:54.521770 scanning usb for storage devices... 0 Storage Device(s) found Jun 29 19:36:54.533746 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 29 19:36:54.977691 Waiting for Ethernet connection... done. Jun 29 19:36:56.621670 BOOTP broadcast 1 Jun 29 19:36:56.621734 BOOTP broadcast 2 Jun 29 19:36:58.709751 DHCP client bound to address 10.149.64.44 (2172 ms) Jun 29 19:36:58.709816 Using asx0 device Jun 29 19:36:58.709857 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 29 19:36:58.721723 Filename 'pxelinux.0'. Jun 29 19:36:58.721778 Load address: 0x43e00000 Jun 29 19:36:58.721820 Loading: *### Jun 29 19:36:58.733697 2.5 MiB/s Jun 29 19:36:58.733751 done Jun 29 19:36:58.733789 Bytes transferred = 42430 (a5be hex) Jun 29 19:36:58.745790 missing environment variable: pxeuuid Jun 29 19:36:58.745847 Retrieving file: pxelinux.cfg/0A95402C Jun 29 19:36:58.745892 Using asx0 device Jun 29 19:36:58.745965 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 29 19:36:58.757794 Filename 'pxelinux.cfg/0A95402C'. Jun 29 19:36:58.757846 Load address: 0x51000000 Jun 29 19:36:58.757889 Loading: *# Jun 29 19:36:58.757928 31.3 KiB/s Jun 29 19:36:58.769748 done Jun 29 19:36:58.769799 Bytes transferred = 65 (41 hex) Jun 29 19:36:58.769843 Config file found Jun 29 19:36:58.769882 Ignoring unknown command: serial Jun 29 19:36:58.769924 1: local Jun 29 19:36:58.769961 scanning bus for devices... Jun 29 19:36:58.781698 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 29 19:36:58.805786 Type: Hard Disk Jun 29 19:36:58.805841 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 29 19:36:58.805890 Found 1 device(s). Jun 29 19:36:58.805930 Jun 29 19:36:58.805967 SCSI device 0: Jun 29 19:36:58.806006 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 29 19:36:58.817835 Type: Hard Disk Jun 29 19:36:58.817890 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 29 19:36:58.829775 ... is now current device Jun 29 19:36:58.829830 Scanning scsi 0... Jun 29 19:36:58.829871 Found U-Boot script /boot.scr Jun 29 19:36:59.009771 1781 bytes read in 37 ms (46.9 KiB/s) Jun 29 19:36:59.045796 ## Executing script at 50000000 Jun 29 19:36:59.057788 Loading dtbs/6.10.0-rc5+/exynos5250-arndale.dtb Jun 29 19:36:59.057848 46641 bytes read in 3555 ms (12.7 KiB/s) Jun 29 19:37:02.484772 983052 bytes read in 120 ms (7.8 MiB/s) Jun 29 19:37:02.632726 Loaded xen-4.19-unstable to 0x41000000 (f000c) Jun 29 19:37:02.644776 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan sched=credit Jun 29 19:37:02.656088 10785280 bytes read in 603 ms (17.1 MiB/s) Jun 29 19:37:03.253642 Loaded vmlinuz-6.10.0-rc5+ to 0x42000000 (a49200) Jun 29 19:37:03.265641 command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 29 19:37:03.277643 12142184 bytes read in 503 ms (23 MiB/s) Jun 29 19:37:03.785615 Loaded initrd.img-6.10.0-rc5+ to 0x43300000 (b94668) Jun 29 19:37:03.785615 chosen { Jun 29 19:37:03.785615 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan sched=credit"; Jun 29 19:37:03.797677 #size-cells = <0x00000001>; Jun 29 19:37:03.809654 #address-cells = <0x00000001>; Jun 29 19:37:03.809654 stdout-path = "serial2:115200n8"; Jun 29 19:37:03.809654 module@1 { Jun 29 19:37:03.809654 reg = <0x43300000 0x00b94668>; Jun 29 19:37:03.809654 compatible = "xen,linux-initrd", "xen,multiboot-module"; Jun 29 19:37:03.821673 }; Jun 29 19:37:03.821673 module@0 { Jun 29 19:37:03.821673 bootargs = "ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Jun 29 19:37:03.833603 reg = <0x42000000 0x00a49200>; Jun 29 19:37:03.845663 compatible = "xen,linux-zimage", "xen,multiboot-module"; Jun 29 19:37:03.845663 }; Jun 29 19:37:03.845663 }; Jun 29 19:37:03.845663 Booting 0x41000000 - 0x43000000 Jun 29 19:37:03.845663 Kernel image @ 0x41000000 [ 0x000000 - 0x12f000 ] Jun 29 19:37:03.857652 ## Flattened Device Tree blob at 43000000 Jun 29 19:37:03.857652 Booting using the fdt blob at 0x43000000 Jun 29 19:37:03.857652 reserving fdt memory region: addr=43000000 size=c000 Jun 29 19:37:03.869651 Loading Device Tree to 4fff1000, end 4fffffff ... OK Jun 29 19:37:03.869651 Jun 29 19:37:03.869651 Starting kernel ...(fake run for tracing) Jun 29 19:37:03.881616 Jun 29 19:37:03.881616 Jun 29 19:37:03.881616 Starting kernel ... Jun 29 19:37:03.881616 Jun 29 19:37:03.881616 __ __ _ _ _ ___ _ _ _ Jun 29 19:37:03.929584 \ \/ /___ _ __ | || | / |/ _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Jun 29 19:37:03.941670 \ // _ \ '_ \ | || |_ | | (_) |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Jun 29 19:37:03.953724 / \ __/ | | | |__ _|| |\__, |__| |_| | | | \__ \ || (_| | |_) | | __/ Jun 29 19:37:03.953735 /_/\_\___|_| |_| |_|(_)_| /_/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Jun 29 19:37:03.965771 Jun 29 19:37:03.965839 (XEN) Xen version 4.19-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Sat Jun 29 18:19:56 UTC 2024 Jun 29 19:37:03.977775 (XEN) Latest ChangeSet: Wed Jun 26 16:07:30 2024 +0100 git:08f9b1dd9c Jun 29 19:37:03.977839 (XEN) build-id: b9392d5be22d35c0073ac9215c669f6e9fcfb743 Jun 29 19:37:03.989735 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Jun 29 19:37:03.989735 (XEN) 32-bit Execution: Jun 29 19:37:03.989735 (XEN) Processor Features: 00001031:00011011 Jun 29 19:37:04.001740 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Jun 29 19:37:04.001740 (XEN) Extensions: GenericTimer Security Jun 29 19:37:04.001740 (XEN) Debug Features: 02010555 Jun 29 19:37:04.013676 (XEN) Auxiliary Features: 00000000 Jun 29 19:37:04.013712 (XEN) Memory Model Features: 10201105 20000000 Jun 29 19:37:04.013737 (XEN) 01240000 02102211 Jun 29 19:37:04.025748 (XEN) ISA Features: 02101110 13112111 21232041 Jun 29 19:37:04.025815 (XEN) 11112131 10011142 00000000 Jun 29 19:37:04.025861 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Jun 29 19:37:04.037779 (XEN) Set SYSRAM to 0000000041000074 (00200074) Jun 29 19:37:04.049765 (XEN) SMP: Allowing 2 CPUs Jun 29 19:37:04.049821 (XEN) enabled workaround for: ARM erratum 766422 Jun 29 19:37:04.049868 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Jun 29 19:37:04.061754 (XEN) GICv2 initialization: Jun 29 19:37:04.061810 (XEN) gic_dist_addr=0000000010481000 Jun 29 19:37:04.061855 (XEN) gic_cpu_addr=0000000010482000 Jun 29 19:37:04.073733 (XEN) gic_hyp_addr=0000000010484000 Jun 29 19:37:04.073792 (XEN) gic_vcpu_addr=0000000010486000 Jun 29 19:37:04.073837 (XEN) gic_maintenance_irq=25 Jun 29 19:37:04.073880 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Jun 29 19:37:04.085783 (XEN) Using scheduler: SMP Credit Scheduler (credit) Jun 29 19:37:04.085850 (XEN) Allocated console ring of 16 KiB. Jun 29 19:37:04.097720 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Jun 29 19:37:04.097763 (XEN) CPU0: Guest atomics will try 1 times before pausing the domain Jun 29 19:37:04.109754 (XEN) Bringing up CPU1 Jun 29 19:37:04.109809 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Jun 29 19:37:04.109859 (XEN) Brought up 2 CPUs Jun 29 19:37:04.109900 (XEN) CPU 1 booted. Jun 29 19:37:04.121745 (XEN) I/O virtualisation disabled Jun 29 19:37:04.121801 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Jun 29 19:37:04.121849 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Jun 29 19:37:04.133724 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Jun 29 19:37:04.133724 (XEN) alternatives: Patching with alt table 002c2f84 -> 002c305c Jun 29 19:37:04.145740 (XEN) CPU0 will execute ICIALLU on guest exit Jun 29 19:37:04.145804 (XEN) CPU1 will execute ICIALLU on guest exit Jun 29 19:37:04.145857 (XEN) *** LOADING DOMAIN 0 *** Jun 29 19:37:04.157770 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Jun 29 19:37:04.157831 (XEN) Loading ramdisk from boot module @ 0000000043300000 Jun 29 19:37:04.157878 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Jun 29 19:37:04.169701 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Jun 29 19:37:04.769829 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Jun 29 19:37:04.769889 (XEN) Allocating PPI 16 for event channel interrupt Jun 29 19:37:04.805770 (XEN) d0: extended regions not supported for 32-bit guests Jun 29 19:37:04.805831 (XEN) Loading zImage from 0000000042000000 to 0000000067400000-0000000067e49200 Jun 29 19:37:04.817742 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d94668 Jun 29 19:37:04.913815 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b499 Jun 29 19:37:05.009670 (XEN) Initial low memory virq threshold set at 0x4000 pages. Jun 29 19:37:05.009704 (XEN) Scrubbing Free RAM in background Jun 29 19:37:05.021635 (XEN) Std. Loglevel: All Jun 29 19:37:05.021666 (XEN) Guest Loglevel: All Jun 29 19:37:05.021689 (XEN) *************************************************** Jun 29 19:37:05.021713 (XEN) WARNING: SILO mode is not enabled. Jun 29 19:37:05.033772 (XEN) It has implications on the security of the system, Jun 29 19:37:05.033832 (XEN) unless the communications have been forbidden between Jun 29 19:37:05.045639 (XEN) untrusted domains. Jun 29 19:37:05.045669 (XEN) *************************************************** Jun 29 19:37:05.045694 (XEN) 3... 2... 1... Jun 29 19:37:08.057785 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 29 19:37:08.057868 (XEN) Freed 352kB init memory. Jun 29 19:37:08.057911 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Jun 29 19:37:09.197796 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Jun 29 19:37:09.209803 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Jun 29 19:37:09.221784 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Jun 29 19:37:09.221843 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Jun 29 19:37:09.233703 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:37:09.233748 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 29 19:37:09.281659 [ 0.000000] Linux version 6.10.0-rc5+ (osstest@himrod2) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Sat Jun 29 17:14:33 UTC 2024 Jun 29 19:37:09.293692 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 29 19:37:09.293692 [ 0.000000] CPU: div instructions available: patching division code Jun 29 19:37:09.305650 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 29 19:37:09.317603 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 29 19:37:09.317603 [ 0.000000] Memory policy: Data cache writealloc Jun 29 19:37:09.329600 [ 0.000000] Xen 4.19 support found Jun 29 19:37:09.329600 [ 0.000000] efi: UEFI not found. Jun 29 19:37:09.329600 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 on node -1 Jun 29 19:37:09.341661 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 29 19:37:09.341661 [ 0.000000] Zone ranges: Jun 29 19:37:09.341661 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Jun 29 19:37:09.353660 [ 0.000000] Normal empty Jun 29 19:37:09.353660 [ 0.000000] HighMem empty Jun 29 19:37:09.353660 [ 0.000000] Movable zone start for each node Jun 29 19:37:09.365663 [ 0.000000] Early memory node ranges Jun 29 19:37:09.365663 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Jun 29 19:37:09.365663 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Jun 29 19:37:09.377674 [ 0.000000] psci: probing for conduit method from DT. Jun 29 19:37:09.377674 [ 0.000000] psci: PSCIv1.1 detected in firmware. Jun 29 19:37:09.389600 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Jun 29 19:37:09.389600 [ 0.000000] psci: Trusted OS migration not required Jun 29 19:37:09.401653 [ 0.000000] psci: SMC Calling Convention v1.2 Jun 29 19:37:09.401653 [ 0.000000] percpu: Embedded 18 pages/cpu s41428 r8192 d24108 u73728 Jun 29 19:37:09.413667 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 29 19:37:09.425656 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 29 19:37:09.437668 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Jun 29 19:37:09.437668 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 131072 Jun 29 19:37:09.449651 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Jun 29 19:37:09.461656 [ 0.000000] Memory: 414600K/524288K available (15360K kernel code, 2268K rwdata, 6084K rodata, 2048K init, 439K bss, 44152K reserved, 65536K cma-reserved, 0K highmem) Jun 29 19:37:09.473666 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 29 19:37:09.473666 [ 0.000000] trace event string verifier disabled Jun 29 19:37:09.485657 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 29 19:37:09.485657 [ 0.000000] rcu: RCU event tracing is enabled. Jun 29 19:37:09.485657 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Jun 29 19:37:09.497688 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Jun 29 19:37:09.509716 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 29 19:37:09.509716 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 29 19:37:09.521763 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 29 19:37:09.521836 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 29 19:37:09.533758 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Jun 29 19:37:09.533820 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 29 19:37:09.545774 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 29 19:37:09.557757 [ 0.000013] Switching to timer-based delay loop, resolution 41ns Jun 29 19:37:09.557819 [ 0.000518] Console: colour dummy device 80x30 Jun 29 19:37:09.569740 [ 0.000536] printk: legacy console [hvc0] enabled Jun 29 19:37:09.569801 [ 0.299536] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Jun 29 19:37:09.581814 [ 0.309934] CPU: Testing write buffer coherency: ok Jun 29 19:37:09.581874 [ 0.314875] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 29 19:37:09.593860 [ 0.324429] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 29 19:37:09.605830 [ 0.330842] pid_max: default: 32768 minimum: 301 Jun 29 19:37:09.605891 [ 0.335629] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 29 19:37:09.617824 [ 0.342910] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 29 19:37:09.617892 [ 0.351312] /cpus/cpu@0 missing clock-frequency property Jun 29 19:37:09.629830 [ 0.356113] /cpus/cpu@1 missing clock-frequency property Jun 29 19:37:09.629891 [ 0.361506] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 29 19:37:09.641819 [ 0.368225] xen:grant_table: Grant tables using version 1 layout Jun 29 19:37:09.641883 [ 0.373362] Grant table initialized Jun 29 19:37:09.653833 [ 0.376918] xen:events: Using FIFO-based ABI Jun 29 19:37:09.653894 [ 0.381215] Xen: initializing cpu0 Jun 29 19:37:09.653939 [ 0.384752] Setting up static identity map for 0x60300000 - 0x603000ac Jun 29 19:37:09.665840 [ 0.392504] rcu: Hierarchical SRCU implementation. Jun 29 19:37:09.665902 [ 0.396134] rcu: Max phase no-delay instances is 1000. Jun 29 19:37:09.677837 [ 0.404346] EFI services will not be available. Jun 29 19:37:09.677897 [ 0.407667] smp: Bringing up secondary CPUs ... Jun 29 19:37:09.689697 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:37:09.749619 [ 0.483068] Xen: initializing cpu1 Jun 29 19:37:09.761635 [ 0.483236] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 29 19:37:09.761635 [ 0.483260] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 29 19:37:09.773671 [ 0.502169] smp: Brought up 1 node, 2 CPUs Jun 29 19:37:09.773671 [ 0.505831] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 29 19:37:09.785654 [ 0.512116] CPU: All CPU(s) started in SVC mode. Jun 29 19:37:09.785654 [ 0.518032] devtmpfs: initialized Jun 29 19:37:09.797612 [ 0.530404] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 29 19:37:09.809675 [ 0.536952] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Jun 29 19:37:09.821672 [ 0.546625] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 29 19:37:09.821672 [ 0.554520] pinctrl core: initialized pinctrl subsystem Jun 29 19:37:09.833795 [ 0.561194] DMI not present or invalid. Jun 29 19:37:09.833855 [ 0.564683] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 29 19:37:09.845656 [ 0.571325] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 29 19:37:09.845656 [ 0.580694] thermal_sys: Registered thermal governor 'step_wise' Jun 29 19:37:09.857714 [ 0.580853] software IO TLB: area num 2. Jun 29 19:37:09.857714 [ 0.589522] software IO TLB: only able to allocate 8 MB Jun 29 19:37:09.869764 [ 0.596596] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Jun 29 19:37:09.869833 [ 0.601814] No ATAGs? Jun 29 19:37:09.881734 [ 0.604102] hw-breakpoint: Failed to enable monitor mode on CPU 0. Jun 29 19:37:09.881798 [ 0.612845] Serial: AMBA PL011 UART driver Jun 29 19:37:09.893670 [ 0.659509] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 65 Jun 29 19:37:09.941615 [ 0.688030] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 29 19:37:09.965740 [ 0.711307] xen:balloon: Initialising balloon driver Jun 29 19:37:09.989756 [ 0.717744] iommu: Default domain type: Translated Jun 29 19:37:09.989817 [ 0.721155] iommu: DMA domain TLB invalidation policy: strict mode Jun 29 19:37:10.001790 [ 0.729912] SCSI subsystem initialized Jun 29 19:37:10.001848 [ 0.732653] usbcore: registered new interface driver usbfs Jun 29 19:37:10.013754 [ 0.737902] usbcore: registered new interface driver hub Jun 29 19:37:10.013815 [ 0.743249] usbcore: registered new device driver usb Jun 29 19:37:10.025747 [ 0.749928] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 29 19:37:10.025808 [ 0.753519] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 29 19:37:10.025857 [ 0.759764] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 29 19:37:10.037750 [ 0.764839] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 29 19:37:10.037811 [ 0.769780] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 29 19:37:10.049767 [ 0.775801] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 29 19:37:10.049828 [ 0.781588] pps_core: LinuxPPS API ver. 1 registered Jun 29 19:37:10.061774 [ 0.785978] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 29 19:37:10.061846 [ 0.795201] PTP clock support registered Jun 29 19:37:10.073779 [ 0.799420] EDAC MC: Ver: 3.0.0 Jun 29 19:37:10.073836 [ 0.802763] scmi_core: SCMI protocol bus registered Jun 29 19:37:10.073883 [ 0.809348] vgaarb: loaded Jun 29 19:37:10.085723 [ 0.813374] clocksource: Switched to clocksource arch_sys_counter Jun 29 19:37:10.085786 [ 0.827432] NET: Registered PF_INET protocol family Jun 29 19:37:10.097747 [ 0.831080] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Jun 29 19:37:10.109769 [ 0.839009] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 29 19:37:10.121724 [ 0.846673] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 29 19:37:10.121724 [ 0.854477] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Jun 29 19:37:10.133815 [ 0.862303] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Jun 29 19:37:10.145765 [ 0.869601] TCP: Hash tables configured (established 4096 bind 4096) Jun 29 19:37:10.145828 [ 0.875964] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 29 19:37:10.157756 [ 0.882516] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 29 19:37:10.157820 [ 0.889648] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 29 19:37:10.169689 [ 0.895769] RPC: Registered named UNIX socket transport module. Jun 29 19:37:10.169723 [ 0.901249] RPC: Registered udp transport module. Jun 29 19:37:10.181753 [ 0.906037] RPC: Registered tcp transport module. Jun 29 19:37:10.181812 [ 0.910796] RPC: Registered tcp-with-tls transport module. Jun 29 19:37:10.193746 [ 0.916378] RPC: Registered tcp NFSv4.1 backchannel transport module. Jun 29 19:37:10.193811 [ 0.922867] PCI: CLS 0 bytes, default 64 Jun 29 19:37:10.193856 [ 0.928298] Initialise system trusted keyrings Jun 29 19:37:10.205771 [ 0.931602] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Jun 29 19:37:10.205833 [ 0.938135] squashfs: version 4.0 (2009/01/31) Phillip Lougher Jun 29 19:37:10.217734 [ 0.944035] Trying to unpack rootfs image as initramfs... Jun 29 19:37:10.217795 [ 0.975049] NFS: Registering the id_resolver key type Jun 29 19:37:10.253658 [ 0.978780] Key type id_resolver registered Jun 29 19:37:10.253692 [ 0.982988] Key type id_legacy registered Jun 29 19:37:10.253717 [ 0.987114] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Jun 29 19:37:10.265768 [ 0.993884] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Jun 29 19:37:10.277709 [ 1.014908] Key type asymmetric registered Jun 29 19:37:10.289710 [ 1.017641] Asymmetric key parser 'x509' registered Jun 29 19:37:10.289771 [ 1.022642] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) Jun 29 19:37:10.301768 [ 1.030067] io scheduler mq-deadline registered Jun 29 19:37:10.301826 [ 1.034680] io scheduler kyber registered Jun 29 19:37:10.313684 [ 1.038751] io scheduler bfq registered Jun 29 19:37:10.313715 [ 1.192453] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 29 19:37:10.469719 [ 1.198705] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 29 19:37:10.481737 [ 1.232720] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 29 19:37:10.505635 [ 1.239007] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 29 19:37:10.517790 [ 1.285324] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 29 19:37:10.565626 [ 1.291534] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 29 19:37:10.577677 [ 1.330088] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 29 19:37:10.613740 [ 1.336357] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 29 19:37:10.613811 [ 1.349085] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 29 19:37:10.625673 [ 1.385633] xen:xen_evtchn: Event-channel device installed Jun 29 19:37:10.661727 [ 1.497301] Freeing initrd memory: 11860K Jun 29 19:37:10.769618 [ 1.525304] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 29 19:37:10.805653 [ 1.536281] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 29 19:37:10.817761 [ 1.544489] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 29 19:37:10.829763 [ 1.553376] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 29 19:37:10.829834 [ 1.562336] SuperH (H)SCI(F) driver initialized Jun 29 19:37:10.841762 [ 1.566675] STMicroelectronics ASC driver initialized Jun 29 19:37:10.841854 [ 1.571538] STM32 USART driver initialized Jun 29 19:37:10.853704 [ 1.582869] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 29 19:37:10.865674 [ 1.599370] brd: module loaded Jun 29 19:37:10.877718 [ 1.605594] loop: module loaded Jun 29 19:37:10.877779 [ 1.612709] random: crng init done Jun 29 19:37:10.889712 [ 1.622277] Invalid max_queues (4), will use default max: 2. Jun 29 19:37:10.901715 [ 1.640961] tun: Universal TUN/TAP device driver, 1.6 Jun 29 19:37:10.913730 [ 1.644824] CAN device driver interface Jun 29 19:37:10.925757 [ 1.649930] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Jun 29 19:37:10.925819 [ 1.661130] xen_netfront: Initialising Xen virtual ethernet driver Jun 29 19:37:10.937710 [ 1.666007] pegasus: Pegasus/Pegasus II USB Ethernet driver Jun 29 19:37:10.949756 [ 1.671600] usbcore: registered new interface driver pegasus Jun 29 19:37:10.949823 [ 1.677339] usbcore: registered new interface driver asix Jun 29 19:37:10.949871 [ 1.682796] usbcore: registered new interface driver ax88179_178a Jun 29 19:37:10.961660 [ 1.688977] usbcore: registered new interface driver cdc_ether Jun 29 19:37:10.961693 [ 1.694871] usbcore: registered new interface driver smsc75xx Jun 29 19:37:10.973757 [ 1.700675] usbcore: registered new interface driver smsc95xx Jun 29 19:37:10.973818 [ 1.706505] usbcore: registered new interface driver net1080 Jun 29 19:37:10.985753 [ 1.712221] usbcore: registered new interface driver cdc_subset Jun 29 19:37:10.985814 [ 1.718235] usbcore: registered new interface driver zaurus Jun 29 19:37:10.997774 [ 1.723870] usbcore: registered new interface driver cdc_ncm Jun 29 19:37:10.997835 [ 1.733203] usbcore: registered new interface driver usb-storage Jun 29 19:37:11.009724 [ 1.743772] i2c_dev: i2c /dev entries driver Jun 29 19:37:11.021708 [ 1.762210] device-mapper: uevent: version 1.0.3 Jun 29 19:37:11.033718 [ 1.765658] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev Jun 29 19:37:11.045778 [ 1.775259] cpu cpu0: OPP table can't be empty Jun 29 19:37:11.045836 [ 1.780000] failed to register cpuidle driver Jun 29 19:37:11.057706 [ 1.783415] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Jun 29 19:37:11.057741 [ 1.791708] sdhci: Secure Digital Host Controller Interface driver Jun 29 19:37:11.069739 [ 1.796723] sdhci: Copyright(c) Pierre Ossman Jun 29 19:37:11.069798 [ 1.804859] sdhci-pltfm: SDHCI platform and OF driver helper Jun 29 19:37:11.081656 [ 1.812665] ledtrig-cpu: registered to indicate activity on CPUs Jun 29 19:37:11.093782 [ 1.818128] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Jun 29 19:37:11.093846 [ 1.824794] usbcore: registered new interface driver usbhid Jun 29 19:37:11.105709 [ 1.829445] usbhid: USB HID core driver Jun 29 19:37:11.105767 [ 1.840374] NET: Registered PF_INET6 protocol family Jun 29 19:37:11.117767 [ 1.844955] Segment Routing with IPv6 Jun 29 19:37:11.117824 [ 1.847726] In-situ OAM (IOAM) with IPv6 Jun 29 19:37:11.129745 [ 1.851747] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Jun 29 19:37:11.129808 [ 1.858202] NET: Registered PF_PACKET protocol family Jun 29 19:37:11.129856 [ 1.862813] can: controller area network core Jun 29 19:37:11.141691 [ 1.867295] NET: Registered PF_CAN protocol family Jun 29 19:37:11.141691 [ 1.872092] can: raw protocol Jun 29 19:37:11.141691 [ 1.875143] can: broadcast manager protocol Jun 29 19:37:11.153751 [ 1.879389] can: netlink gateway - max_hops=1 Jun 29 19:37:11.153814 [ 1.884140] Key type dns_resolver registered Jun 29 19:37:11.165733 [ 1.888812] ThumbEE CPU extension supported. Jun 29 19:37:11.165792 [ 1.892495] Registering SWP/SWPB emulation handler Jun 29 19:37:11.165839 [ 1.906888] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level Jun 29 19:37:11.189656 [ 1.913809] Loading compiled-in X.509 certificates Jun 29 19:37:11.189689 [ 1.960031] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 29 19:37:11.237752 [ 1.963669] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 29 19:37:11.237814 [ 1.970273] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 29 19:37:11.249721 [ 1.978429] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 29 19:37:11.261635 [ 2.020448] s5m-rtc s5m-rtc: registered as rtc0 Jun 29 19:37:11.297725 [ 2.029415] s5m-rtc s5m-rtc: setting system clock to 2024-06-29T19:37:12 UTC (1719689832) Jun 29 19:37:11.309741 [ 2.040478] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 29 19:37:11.321747 [ 2.045154] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 29 19:37:11.321808 [ 2.049466] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 29 19:37:11.321857 [ 2.056311] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 29 19:37:11.333752 [ 2.062084] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 29 19:37:11.345758 [ 2.068217] clk: Not disabling unused clocks Jun 29 19:37:11.345819 [ 2.071758] PM: genpd: Disabling unused power domains Jun 29 19:37:11.345867 [ 2.080297] Freeing unused kernel image (initmem) memory: 2048K Jun 29 19:37:11.357703 [ 2.086652] Run /init as init process Jun 29 19:37:11.357760 Loading, please wait... Jun 29 19:37:11.381721 Starting systemd-udevd version 252.26-1~deb12u2 Jun 29 19:37:11.453730 [ 3.336837] i2c-gpio i2c-10: using lines 552 (SDA) and 553 (SCL) Jun 29 19:37:12.617646 [ 3.441330] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 29 19:37:12.725734 [ 3.448610] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 29 19:37:12.725805 [ 3.473851] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 29 19:37:12.749646 [ 3.509049] Synopsys Designware Multimedia Card Interface Driver Jun 29 19:37:12.785738 [ 3.516927] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 29 19:37:12.797763 [ 3.523150] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 29 19:37:12.797829 [ 3.530676] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 29 19:37:12.809720 [ 3.583523] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 29 19:37:12.857761 [ 3.589231] ahci-dwc 122f0000.sata: AHCI vers 0001.0300, 32 command slots, 6 Gbps, platform mode Jun 29 19:37:12.869742 [ 3.598098] ahci-dwc 122f0000.sata: 1/1 ports implemented (port mask 0x1) Jun 29 19:37:12.881737 [ 3.604934] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 29 19:37:12.881808 [ 3.620583] phy phy-12130000.phy.9: phy_power_on was called before phy_init Jun 29 19:37:12.893731 [ 3.626234] exynos-ehci 12110000.usb: EHCI Host Controller Jun 29 19:37:12.905771 [ 3.631770] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Jun 29 19:37:12.917722 [ 3.644936] s2mps11-clk s5m8767-clk: DMA mask not set Jun 29 19:37:12.917784 [ 3.647903] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 29 19:37:12.929725 [ 3.677552] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 29 19:37:12.953727 [ 3.693845] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 29 19:37:12.965716 [ 3.695718] phy phy-12130000.phy.9: phy_power_on was called before phy_init Jun 29 19:37:12.977770 [ 3.698934] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 29 19:37:12.989730 [ 3.705982] exynos-ohci 12120000.usb: USB Host Controller Jun 29 19:37:12.989793 [ 3.711526] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 128,32 bit host data width,128 deep fifo Jun 29 19:37:13.001747 [ 3.716939] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Jun 29 19:37:13.001851 [ 3.773582] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 29 19:37:13.049759 [ 3.778667] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 29 19:37:13.061659 [ 3.784224] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 127,32 bit host data width,128 deep fifo Jun 29 19:37:13.061699 [ 3.794135] mmc_host mmc0: card is polling. Jun 29 19:37:13.073738 [ 3.798597] exynos-ehci 12110000.usb: irq 126, io mem 0x12110000 Jun 29 19:37:13.073801 [ 3.804207] scsi host0: ahci-dwc Jun 29 19:37:13.073845 [ 3.807663] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 125 lpm-pol 0 Jun 29 19:37:13.085780 [ 3.815456] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 29 19:37:13.097743 [ 3.838984] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 29 19:37:13.121643 [ 3.845176] hub 1-0:1.0: USB hub found Jun 29 19:37:13.121643 [ 3.855211] exynos-ohci 12120000.usb: irq 126, io mem 0x12120000 Jun 29 19:37:13.133671 [ 3.862967] hub 1-0:1.0: 3 ports detected Jun 29 19:37:13.133707 [ 3.865933] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 29 19:37:13.145737 [ 3.897949] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Jun 29 19:37:13.169750 [ 3.902586] s3c-rtc 101e0000.rtc: registered as rtc1 Jun 29 19:37:13.181700 [ 3.936853] hub 2-0:1.0: USB hub found Jun 29 19:37:13.205725 [ 3.939296] hub 2-0:1.0: 3 ports detected Jun 29 19:37:13.217703 [ 4.002761] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 29 19:37:13.277837 [ 4.018818] mmc0: new DDR MMC card at address 0001 Jun 29 19:37:13.289806 [ 4.028782] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Jun 29 19:37:13.301803 [ 4.039940] mmcblk0: p1 p2 p3 p4 Jun 29 19:37:13.313774 [ 4.047393] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Jun 29 19:37:13.325838 [ 4.047772] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 29 19:37:13.337774 [ 4.053306] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Jun 29 19:37:13.337836 [ 4.070790] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Jun 29 19:37:13.349746 [ 4.076554] mmc1: new high speed SDHC card at address aaaa Jun 29 19:37:13.349807 [ 4.089335] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Jun 29 19:37:13.361693 [ 4.353472] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 29 19:37:13.625731 [ 4.366800] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 29 19:37:13.649714 [ 4.372165] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 29 19:37:13.649778 [ 4.394211] ata1.00: configured for UDMA/133 Jun 29 19:37:13.673747 [ 4.397567] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 29 19:37:13.673816 [ 4.407223] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 29 19:37:13.685703 [ 4.413427] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 29 19:37:13.685735 [ 4.418898] sd 0:0:0:0: [sda] Write Protect is off Jun 29 19:37:13.697773 [ 4.423615] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 29 19:37:13.709648 [ 4.432755] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 29 19:37:13.709683 [ 4.455913] sda: sda1 sda2 < sda5 > Jun 29 19:37:13.733734 [ 4.459144] sd 0:0:0:0: [sda] Attached SCSI disk Jun 29 19:37:13.733793 [ 4.566652] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Jun 29 19:37:13.841721 [ 4.597883] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 29 19:37:13.877750 [ 4.602833] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 29 19:37:13.877815 [ 4.629423] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002000010 Jun 29 19:37:13.913762 [ 4.638038] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Jun 29 19:37:13.913826 [ 4.643948] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 29 19:37:13.925651 [ 4.649158] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 29 19:37:13.925688 [ 4.656934] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 29 19:37:13.937696 [ 4.677538] hub 3-0:1.0: USB hub found Jun 29 19:37:13.949729 [ 4.680367] hub 3-0:1.0: 1 port detected Jun 29 19:37:13.961748 [ 4.686219] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 29 19:37:13.961818 [ 4.694040] hub 4-0:1.0: USB hub found Jun 29 19:37:13.973705 [ 4.697615] hub 4-0:1.0: 1 port detected Jun 29 19:37:13.973763 [ 5.086226] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 29 19:37:14.369668 [ 5.263499] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 29 19:37:14.549631 [ 5.401452] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 29 19:37:14.681726 [ 5.509797] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 29 19:37:14.789620 [ 5.618154] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 29 19:37:14.897641 [ 5.726449] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 29 19:37:15.005608 [ 6.097824] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 29 19:37:15.377600 [ 6.272953] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 29 19:37:15.558112 [ 6.387302] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 29 19:37:15.665657 [ 6.495057] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 29 19:37:15.773647 [ 6.602775] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 29 19:37:15.881651 [ 6.710527] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 29 19:37:15.989683 [ 6.718140] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 29 19:37:16.001639 Begin: Loading essential drivers ... done. Jun 29 19:37:16.049605 Begin: Running /scripts/init-premount ... done. Jun 29 19:37:19.053654 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 29 19:37:19.065651 Begin: Running /scripts/local-premount ... done. Jun 29 19:37:19.077602 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 29 19:37:19.161612 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 29 19:37:19.281648 /dev/mapper/arndale--metrocentre--vg-root: clean, 46073/1220608 files, 606048/4882432 blocks Jun 29 19:37:19.533660 done. Jun 29 19:37:19.545629 [ 10.283697] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 29 19:37:19.557695 [ 10.697271] EXT4-fs (dm-0): mounted filesystem d78527d4-348b-42a8-91bb-e8ddef8954ef ro with ordered data mode. Quota mode: disabled. Jun 29 19:37:19.977725 done. Jun 29 19:37:19.977754 Begin: Running /scripts/local-bottom ... done. Jun 29 19:37:20.037663 Begin: Running /scripts/init-bottom ... done. Jun 29 19:37:20.073627 INIT: version 3.06 booting Jun 29 19:37:20.613699 INIT: No inittab.d directory found Jun 29 19:37:20.697628 Using makefile-style concurrent boot in runlevel S. Jun 29 19:37:20.997632 Starting hotplug events dispatcher: systemd-udevd. Jun 29 19:37:22.720420 Synthesizing the initial hotplug events (subsystems)...done. Jun 29 19:37:23.180444 Synthesizing the initial hotplug events (devices)...done. Jun 29 19:37:23.960385 Waiting for /dev to be fully populated...[ 14.718185] wm8994 3-001a: Device is not a WM8994, ID is 0 Jun 29 19:37:23.996418 [ 14.744512] wm8994 3-001a: probe with driver wm8994 failed with error -22 Jun 29 19:37:24.020485 [ 14.867552] s5p-secss 10830000.sss: s5p-sss driver registered Jun 29 19:37:24.140475 [ 14.885303] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 29 19:37:24.164396 [ 14.900032] mc: Linux media interface: v0.10 Jun 29 19:37:24.176417 [ 15.046774] videodev: Linux video capture interface: v2.00 Jun 29 19:37:24.320413 [ 15.208351] s5p-mfc 11000000.codec: Adding to iommu group 0 Jun 29 19:37:24.488404 [ 15.260273] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Jun 29 19:37:24.536603 [ 15.347067] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 29 19:37:24.632505 [ 15.354888] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 29 19:37:24.632505 [ 15.363543] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 29 19:37:24.644421 [ 15.383559] s5p-mfc 11000000.codec: decoder registered as /dev/video0 Jun 29 19:37:24.656447 [ 15.393102] s5p-mfc 11000000.codec: encoder registered as /dev/video1 Jun 29 19:37:24.668399 [ 15.413410] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 29 19:37:24.692611 [ 15.440242] exynos-gsc 13e00000.gsc: Adding to iommu group 1 Jun 29 19:37:24.716520 [ 15.490252] exynos-gsc 13e10000.gsc: Adding to iommu group 2 Jun 29 19:37:24.764471 [ 15.500253] exynos-gsc 13e20000.gsc: Adding to iommu group 3 Jun 29 19:37:24.776507 [ 15.505531] exynos-gsc 13e30000.gsc: Adding to iommu group 4 Jun 29 19:37:24.788417 [ 15.593571] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 29 19:37:24.872482 [ 15.643500] usb3503 usb-hub: switched to HUB mode Jun 29 19:37:24.920500 [ 15.646881] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 29 19:37:24.920500 [ 15.766388] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 29 19:37:25.052428 [ 15.884800] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 29 19:37:25.160492 [ 15.993028] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 29 19:37:25.268486 [ 15.993513] usb 1-3: new high-speed USB device number 2 using exynos-ehci Jun 29 19:37:25.280499 [ 16.037278] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Jun 29 19:37:25.316462 [ 16.101381] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 29 19:37:25.376486 [ 16.305659] hub 1-3:1.0: USB hub found Jun 29 19:37:25.580462 [ 16.315623] hub 1-3:1.0: 3 ports detected Jun 29 19:37:25.591860 [ 16.321762] I/O error, dev mmcblk1, sector 7743712 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 Jun 29 19:37:25.603141 [ 16.437680] I/O error, dev mmcblk1, sector 7743713 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 Jun 29 19:37:25.712644 [ 16.449061] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 29 19:37:25.728098 [ 16.456769] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 29 19:37:25.736497 [ 16.465494] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 29 19:37:25.748497 [ 16.477088] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 29 19:37:25.760503 [ 16.485038] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 29 19:37:25.760503 [ 16.493768] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 29 19:37:25.772478 [ 16.653435] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Jun 29 19:37:25.928468 [ 16.779560] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 29 19:37:26.060615 [ 16.806620] hub 1-3.2:1.0: USB hub found Jun 29 19:37:26.084502 [ 16.809552] hub 1-3.2:1.0: 4 ports detected Jun 29 19:37:26.084502 [ 16.860149] usbcore: registered new device driver onboard-usb-dev Jun 29 19:37:26.132398 [ 16.962635] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 29 19:37:26.240398 [ 16.984247] hub 1-3.2:1.0: USB hub found Jun 29 19:37:26.264420 [ 16.987190] hub 1-3.2:1.0: 4 ports detected Jun 29 19:37:26.264420 [ 16.999699] hub 1-3.2:1.0: USB hub found Jun 29 19:37:26.276408 [ 17.002647] hub 1-3.2:1.0: 4 ports detected Jun 29 19:37:26.276408 [ 17.077094] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 29 19:37:26.360395 [ 17.184888] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 29 19:37:26.468384 [ 17.292613] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 29 19:37:26.576500 [ 17.323409] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 29 19:37:26.600620 [ 17.400377] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 29 19:37:26.684567 [ 17.407996] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 29 19:37:26.684567 done. Jun 29 19:37:26.708429 [ 17.484387] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 29 19:37:26.768433 [ 17.867198] EXT4-fs (dm-0): re-mounted d78527d4-348b-42a8-91bb-e8ddef8954ef r/w. Quota mode: disabled. Jun 29 19:37:27.144657 [ 18.235385] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 29 19:37:27.520453 [ 18.252329] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Jun 29 19:37:27.532556 [ 18.262338] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, a6:1b:eb:ae:83:f1 Jun 29 19:37:27.548463 Checking file systems.../dev/sda1: clean, 2179/61056 files, 44463/243968 blocks Jun 29 19:37:28.256475 done. Jun 29 19:37:28.292433 Cleaning up temporary files... /tmp. Jun 29 19:37:28.556444 [ 20.059300] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 29 19:37:29.336464 [ 20.231619] EXT4-fs (sda1): mounted filesystem 8c16fc8a-3143-47fe-a247-0b6e342aa181 r/w with ordered data mode. Quota mode: disabled. Jun 29 19:37:29.516438 [ 20.331830] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k Jun 29 19:37:29.612454 Mounting local filesystems...done. Jun 29 19:37:29.868446 Activating swapfile swap, if any...done. Jun 29 19:37:29.868446 Cleaning up temporary files.... Jun 29 19:37:29.892501 Starting Setting kernel variables: sysctl. Jun 29 19:37:30.084432 [ 22.193596] xenbr0: port 1(eth0) entered blocking state Jun 29 19:37:31.468495 [ 22.197459] xenbr0: port 1(eth0) entered disabled state Jun 29 19:37:31.480512 [ 22.202788] asix 1-3.2.4:1.0 eth0: entered allmulticast mode Jun 29 19:37:31.480512 [ 22.208655] asix 1-3.2.4:1.0 eth0: entered promiscuous mode Jun 29 19:37:31.480512 [ 22.219549] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Jun 29 19:37:31.492425 Configuring network interfaces...RTNETLINK answers: Operation not supported Jun 29 19:37:33.148479 Jun 29 19:37:33.148479 Waiting for xenbr0 to get ready (MAXWAIT is 2 seconds). Jun 29 19:37:33.148479 [ 24.472177] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 29 19:37:33.748450 [ 24.478236] xenbr0: port 1(eth0) entered blocking state Jun 29 19:37:33.760534 [ 24.483433] xenbr0: port 1(eth0) entered forwarding state Jun 29 19:37:33.760534 done. Jun 29 19:37:33.976429 Cleaning up temporary files.... Jun 29 19:37:34.060380 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Jun 29 19:37:34.108372 Starting nftables: none Jun 29 19:37:34.144375 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Jun 29 19:37:34.252399 failed! Jun 29 19:37:34.264393 startpar: service(s) returned failure: nftables ... failed! Jun 29 19:37:34.264393 INIT: Entering runlevel: 2 Jun 29 19:37:34.276428 Using makefile-style concurrent boot in runlevel 2. Jun 29 19:37:34.288416 Starting Apache httpd web server: apache2AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.149.64.44. Set the 'ServerName' directive globally to suppress this message Jun 29 19:37:35.068578 . Jun 29 19:37:36.153044 Starting NTP server: ntpd2024-06-29T19:37:37 ntpd[1146]: INIT: ntpd ntpsec-1.2.2: Starting Jun 29 19:37:36.633741 2024-06-29T19:37:37 ntpd[1146]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 29 19:37:36.645679 . Jun 29 19:37:36.645706 Starting SMP IRQ Balancer: irqbalance. Jun 29 19:37:36.837643 Starting system message bus: dbus. Jun 29 19:37:37.068483 Starting OpenBSD Secure Shell server: sshd. Jun 29 19:37:37.768421 Starting /usr/local/sbin/oxenstored... Jun 29 19:37:40.232692 Setting domain 0 name, domid and JSON config... Jun 29 19:37:40.232739 Done setting up Dom0 Jun 29 19:37:40.232762 Starting xenconsoled... Jun 29 19:37:40.232784 Starting QEMU as disk backend for dom0 Jun 29 19:37:40.248580 Jun 29 19:37:41.316646 Debian GNU/Linux 12 arndale-metrocentre hvc0 Jun 29 19:37:41.316704 Jun 29 19:37:41.316727 arndale-metrocentre login: [ 118.705193] EXT4-fs (dm-3): mounted filesystem f0d1e98e-c780-4b1f-abba-035277062467 r/w with ordered data mode. Quota mode: disabled. Jun 29 19:39:07.985832 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 19:39:20.377645 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 19:46:01.797797 [ 639.751607] EXT4-fs (dm-3): unmounting filesystem f0d1e98e-c780-4b1f-abba-035277062467. Jun 29 19:47:49.025711 [ 646.665115] EXT4-fs (dm-3): mounted filesystem f0d1e98e-c780-4b1f-abba-035277062467 r/w with ordered data mode. Quota mode: disabled. Jun 29 19:47:55.937804 [ 651.780270] EXT4-fs (dm-3): unmounting filesystem f0d1e98e-c780-4b1f-abba-035277062467. Jun 29 19:48:01.053726 [ 667.124807] xenbr0: port 2(vif1.0) entered blocking state Jun 29 19:48:16.397896 [ 667.128843] xenbr0: port 2(vif1.0) entered disabled state Jun 29 19:48:16.397989 [ 667.134378] vif vif-1-0 vif1.0: entered allmulticast mode Jun 29 19:48:16.409727 [ 667.139955] vif vif-1-0 vif1.0: entered promiscuous mode Jun 29 19:48:16.409806 (XEN) d1v0 Unhandled SMC/HVC: 0x8600ff01 Jun 29 19:48:17.573740 (XEN) d1v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:48:17.597664 (XEN) d1v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:48:17.633621 (XEN) d1v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:48:17.657687 (XEN) d1v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:48:17.681683 [ 668.946622] xen-blkback: backend/vbd/1/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 29 19:48:18.221600 [ 668.987574] xen-blkback: backend/vbd/1/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 29 19:48:18.261717 (XEN) common/grant_table.c:1909:d1v1 Expanding d1 grant table from 1 to 2 frames Jun 29 19:48:18.317693 (XEN) common/grant_table.c:1909:d1v1 Expanding d1 grant table from 2 to 3 frames Jun 29 19:48:18.329595 [ 669.115574] vif vif-1-0 vif1.0: Guest Rx ready Jun 29 19:48:18.389704 [ 669.118822] xenbr0: port 2(vif1.0) entered blocking state Jun 29 19:48:18.389772 [ 669.133693] xenbr0: port 2(vif1.0) entered forwarding state Jun 29 19:48:18.401706 (XEN) gnttab_mark_dirty not implemented yet Jun 29 19:48:18.437710 (XEN) common/grant_table.c:1909:d1v0 Expanding d1 grant table from 3 to 4 frames Jun 29 19:48:40.245768 [ 699.013392] dwmmc_exynos 12200000.mmc: Unexpected interrupt latency Jun 29 19:48:48.289572 [ 734.468673] xenbr0: port 2(vif1.0) entered disabled state Jun 29 19:49:23.733761 [ 734.793851] xenbr0: port 2(vif1.0) entered disabled state Jun 29 19:49:24.057739 [ 734.813644] vif vif-1-0 vif1.0 (unregistering): left allmulticast mode Jun 29 19:49:24.081776 [ 734.818887] vif vif-1-0 vif1.0 (unregistering): left promiscuous mode Jun 29 19:49:24.093608 [ 734.825447] xenbr0: port 2(vif1.0) entered disabled state Jun 29 19:49:24.093643 [ 762.325794] xenbr0: port 2(vif2.0) entered blocking state Jun 29 19:49:51.597755 [ 762.329833] xenbr0: port 2(vif2.0) entered disabled state Jun 29 19:49:51.597827 [ 762.335339] vif vif-2-0 vif2.0: entered allmulticast mode Jun 29 19:49:51.609736 [ 762.340943] vif vif-2-0 vif2.0: entered promiscuous mode Jun 29 19:49:51.609798 (XEN) d2v0 Unhandled SMC/HVC: 0x8600ff01 Jun 29 19:49:52.737701 (XEN) d2v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:49:52.761691 (XEN) d2v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:49:52.797668 (XEN) d2v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:49:52.821848 (XEN) d2v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:49:52.845624 [ 764.137665] xen-blkback: backend/vbd/2/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 29 19:49:53.409771 [ 764.224613] xen-blkback: backend/vbd/2/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 29 19:49:53.493675 (XEN) common/grant_table.c:1909:d2v3 Expanding d2 grant table from 1 to 2 frames Jun 29 19:49:53.577690 (XEN) common/grant_table.c:1909:d2v3 Expanding d2 grant table from 2 to 3 frames Jun 29 19:49:53.577726 [ 764.356237] vif vif-2-0 vif2.0: Guest Rx ready Jun 29 19:49:53.625790 [ 764.359500] xenbr0: port 2(vif2.0) entered blocking state Jun 29 19:49:53.625852 [ 764.364840] xenbr0: port 2(vif2.0) entered forwarding state Jun 29 19:49:53.637732 [ 819.795509] xenbr0: port 2(vif2.0) entered disabled state Jun 29 19:50:49.069831 [ 820.123920] xenbr0: port 2(vif2.0) entered disabled state Jun 29 19:50:49.393769 [ 820.130070] vif vif-2-0 vif2.0 (unregistering): left allmulticast mode Jun 29 19:50:49.405784 [ 820.135298] vif vif-2-0 vif2.0 (unregistering): left promiscuous mode Jun 29 19:50:49.405848 [ 820.141799] xenbr0: port 2(vif2.0) entered disabled state Jun 29 19:50:49.417685 [ 847.070400] xenbr0: port 2(vif3.0) entered blocking state Jun 29 19:51:16.341812 [ 847.074500] xenbr0: port 2(vif3.0) entered disabled state Jun 29 19:51:16.341885 [ 847.079928] vif vif-3-0 vif3.0: entered allmulticast mode Jun 29 19:51:16.341939 [ 847.085582] vif vif-3-0 vif3.0: entered promiscuous mode Jun 29 19:51:16.353672 (XEN) d3v0 Unhandled SMC/HVC: 0x8600ff01 Jun 29 19:51:17.481765 (XEN) d3v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:51:17.505715 (XEN) d3v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:51:17.541737 (XEN) d3v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:51:17.577692 (XEN) d3v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:51:17.601736 [ 848.752446] xen-blkback: backend/vbd/3/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 29 19:51:18.021739 [ 848.812928] xen-blkback: backend/vbd/3/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 29 19:51:18.081744 (XEN) common/grant_table.c:1909:d3v2 Expanding d3 grant table from 1 to 2 frames Jun 29 19:51:18.141766 (XEN) common/grant_table.c:1909:d3v2 Expanding d3 grant table from 2 to 3 frames Jun 29 19:51:18.153701 [ 848.933864] vif vif-3-0 vif3.0: Guest Rx ready Jun 29 19:51:18.201706 [ 848.967928] xenbr0: port 2(vif3.0) entered blocking state Jun 29 19:51:18.237729 [ 848.971970] xenbr0: port 2(vif3.0) entered forwarding state Jun 29 19:51:18.237832 [ 852.303397] dwmmc_exynos 12200000.mmc: Unexpected interrupt latency Jun 29 19:51:21.573758 [ 904.216919] xenbr0: port 2(vif3.0) entered disabled state Jun 29 19:52:13.488732 [ 904.520683] xenbr0: port 2(vif3.0) entered disabled state Jun 29 19:52:13.788757 [ 904.538860] vif vif-3-0 vif3.0 (unregistering): left allmulticast mode Jun 29 19:52:13.812786 [ 904.544125] vif vif-3-0 vif3.0 (unregistering): left promiscuous mode Jun 29 19:52:13.812851 [ 904.550578] xenbr0: port 2(vif3.0) entered disabled state Jun 29 19:52:13.824677 [ 931.427494] xenbr0: port 2(vif4.0) entered blocking state Jun 29 19:52:40.696646 [ 931.431534] xenbr0: port 2(vif4.0) entered disabled state Jun 29 19:52:40.696646 [ 931.437087] vif vif-4-0 vif4.0: entered allmulticast mode Jun 29 19:52:40.708609 [ 931.442650] vif vif-4-0 vif4.0: entered promiscuous mode Jun 29 19:52:40.708609 (XEN) d4v0 Unhandled SMC/HVC: 0x8600ff01 Jun 29 19:52:41.868535 (XEN) d4v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:52:41.880538 (XEN) d4v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:52:41.916536 (XEN) d4v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:52:41.940539 (XEN) d4v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:52:41.976572 [ 933.200451] xen-blkback: backend/vbd/4/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 29 19:52:42.468777 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 19:52:42.492560 [ 933.250888] xen-blkback: backend/vbd/4/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 29 19:52:42.516606 (XEN) common/grant_table.c:1909:d4v1 Expanding d4 grant table from 1 to 2 frames Jun 29 19:52:42.552614 (XEN) common/grant_table.c:1909:d4v1 Expanding d4 grant table from 2 to 3 frames Jun 29 19:52:42.564562 [ 933.345913] vif vif-4-0 vif4.0: Guest Rx ready Jun 29 19:52:42.612611 [ 933.349677] xenbr0: port 2(vif4.0) entered blocking state Jun 29 19:52:42.612611 [ 933.354494] xenbr0: port 2(vif4.0) entered forwarding state Jun 29 19:52:42.624721 [ 988.829303] xenbr0: port 2(vif4.0) entered disabled state Jun 29 19:53:38.100488 [ 989.184254] xenbr0: port 2(vif4.0) entered disabled state Jun 29 19:53:38.448562 [ 989.190890] vif vif-4-0 vif4.0 (unregistering): left allmulticast mode Jun 29 19:53:38.460567 [ 989.196113] vif vif-4-0 vif4.0 (unregistering): left promiscuous mode Jun 29 19:53:38.460567 [ 989.202607] xenbr0: port 2(vif4.0) entered disabled state Jun 29 19:53:38.472543 [ 1016.141793] xenbr0: port 2(vif5.0) entered blocking state Jun 29 19:54:05.405752 [ 1016.145881] xenbr0: port 2(vif5.0) entered disabled state Jun 29 19:54:05.417741 [ 1016.151320] vif vif-5-0 vif5.0: entered allmulticast mode Jun 29 19:54:05.417804 [ 1016.156978] vif vif-5-0 vif5.0: entered promiscuous mode Jun 29 19:54:05.429678 (XEN) d5v0 Unhandled SMC/HVC: 0x8600ff01 Jun 29 19:54:06.564632 (XEN) d5v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:54:06.576736 (XEN) d5v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:54:06.611324 (XEN) d5v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:54:06.636698 (XEN) d5v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:54:06.696549 [ 1017.822569] xen-blkback: backend/vbd/5/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 29 19:54:07.088764 [ 1017.871780] xen-blkback: backend/vbd/5/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 29 19:54:07.136591 (XEN) common/grant_table.c:1909:d5v2 Expanding d5 grant table from 1 to 2 frames Jun 29 19:54:07.172644 (XEN) common/grant_table.c:1909:d5v2 Expanding d5 grant table from 2 to 3 frames Jun 29 19:54:07.184756 [ 1018.042167] vif vif-5-0 vif5.0: Guest Rx ready Jun 29 19:54:07.304579 [ 1018.045507] xenbr0: port 2(vif5.0) entered blocking state Jun 29 19:54:07.316612 [ 1018.050727] xenbr0: port 2(vif5.0) entered forwarding state Jun 29 19:54:07.316612 [ 1036.023395] dwmmc_exynos 12200000.mmc: Unexpected interrupt latency Jun 29 19:54:25.296613 [ 1071.978804] xenbr0: port 2(vif5.0) entered disabled state Jun 29 19:55:01.249754 [ 1072.304016] xenbr0: port 2(vif5.0) entered disabled state Jun 29 19:55:01.573677 [ 1072.313787] vif vif-5-0 vif5.0 (unregistering): left allmulticast mode Jun 29 19:55:01.585713 [ 1072.318997] vif vif-5-0 vif5.0 (unregistering): left promiscuous mode Jun 29 19:55:01.585749 [ 1072.325520] xenbr0: port 2(vif5.0) entered disabled state Jun 29 19:55:01.597682 [ 1099.236333] xenbr0: port 2(vif6.0) entered blocking state Jun 29 19:55:28.496596 [ 1099.240384] xenbr0: port 2(vif6.0) entered disabled state Jun 29 19:55:28.508621 [ 1099.245903] vif vif-6-0 vif6.0: entered allmulticast mode Jun 29 19:55:28.508621 [ 1099.251486] vif vif-6-0 vif6.0: entered promiscuous mode Jun 29 19:55:28.520557 (XEN) d6v0 Unhandled SMC/HVC: 0x8600ff01 Jun 29 19:55:29.669737 (XEN) d6v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:55:29.681662 (XEN) d6v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:55:29.729699 (XEN) d6v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:55:29.753667 (XEN) d6v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:55:29.777730 [ 1101.142506] xen-blkback: backend/vbd/6/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 29 19:55:30.413749 (XEN) common/grant_table.c:1909:d6v3 Expanding d6 grant table from 1 to 2 frames Jun 29 19:55:30.449764 (XEN) common/grant_table.c:1909:d6v3 Expanding d6 grant table from 2 to 3 frames Jun 29 19:55:30.449829 [ 1101.204183] xen-blkback: backend/vbd/6/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 29 19:55:30.473719 [ 1101.286800] vif vif-6-0 vif6.0: Guest Rx ready Jun 29 19:55:30.545742 [ 1101.290025] xenbr0: port 2(vif6.0) entered blocking state Jun 29 19:55:30.557747 [ 1101.295405] xenbr0: port 2(vif6.0) entered forwarding state Jun 29 19:55:30.557781 [ 1101.433643] hrtimer: interrupt took 90248292 ns Jun 29 19:55:30.701690 [ 1157.004393] xenbr0: port 2(vif6.0) entered disabled state Jun 29 19:56:26.265556 [ 1157.286567] xenbr0: port 2(vif6.0) entered disabled state Jun 29 19:56:26.553771 [ 1157.294000] vif vif-6-0 vif6.0 (unregistering): left allmulticast mode Jun 29 19:56:26.565755 [ 1157.299197] vif vif-6-0 vif6.0 (unregistering): left promiscuous mode Jun 29 19:56:26.565819 [ 1157.305772] xenbr0: port 2(vif6.0) entered disabled state Jun 29 19:56:26.577687 [ 1184.395532] xenbr0: port 2(vif7.0) entered blocking state Jun 29 19:56:53.661751 [ 1184.399589] xenbr0: port 2(vif7.0) entered disabled state Jun 29 19:56:53.661805 [ 1184.405099] vif vif-7-0 vif7.0: entered allmulticast mode Jun 29 19:56:53.673757 [ 1184.410687] vif vif-7-0 vif7.0: entered promiscuous mode Jun 29 19:56:53.673791 (XEN) d7v0 Unhandled SMC/HVC: 0x8600ff01 Jun 29 19:56:54.825749 (XEN) d7v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:56:54.837728 (XEN) d7v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:56:54.873730 (XEN) d7v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:56:54.909731 (XEN) d7v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:56:54.933715 [ 1186.226915] xen-blkback: backend/vbd/7/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 29 19:56:55.497742 [ 1186.314210] xen-blkback: backend/vbd/7/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 29 19:56:55.581777 (XEN) common/grant_table.c:1909:d7v1 Expanding d7 grant table from 1 to 2 frames Jun 29 19:56:55.605777 (XEN) common/grant_table.c:1909:d7v1 Expanding d7 grant table from 2 to 3 frames Jun 29 19:56:55.617708 [ 1186.406877] vif vif-7-0 vif7.0: Guest Rx ready Jun 29 19:56:55.665747 [ 1186.410081] xenbr0: port 2(vif7.0) entered blocking state Jun 29 19:56:55.677706 [ 1186.423711] xenbr0: port 2(vif7.0) entered forwarding state Jun 29 19:56:55.689765 [ 1208.448338] dwmmc_exynos 12200000.mmc: Unexpected interrupt latency Jun 29 19:57:17.717606 [ 1241.461989] xenbr0: port 2(vif7.0) entered disabled state Jun 29 19:57:50.728538 [ 1241.833840] xenbr0: port 2(vif7.0) entered disabled state Jun 29 19:57:51.100783 [ 1241.838417] vif vif-7-0 vif7.0 (unregistering): left allmulticast mode Jun 29 19:57:51.100805 [ 1241.844547] vif vif-7-0 vif7.0 (unregistering): left promiscuous mode Jun 29 19:57:51.112640 [ 1241.851023] xenbr0: port 2(vif7.0) entered disabled state Jun 29 19:57:51.112640 [ 1268.845586] xenbr0: port 2(vif8.0) entered blocking state Jun 29 19:58:18.109836 [ 1268.849624] xenbr0: port 2(vif8.0) entered disabled state Jun 29 19:58:18.109919 [ 1268.855171] vif vif-8-0 vif8.0: entered allmulticast mode Jun 29 19:58:18.121801 [ 1268.860740] vif vif-8-0 vif8.0: entered promiscuous mode Jun 29 19:58:18.121858 (XEN) d8v0 Unhandled SMC/HVC: 0x8600ff01 Jun 29 19:58:19.273747 (XEN) d8v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:58:19.285814 (XEN) d8v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:58:19.333750 (XEN) d8v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:58:19.357685 (XEN) d8v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:58:19.381738 [ 1270.910960] xen-blkback: backend/vbd/8/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 29 19:58:20.173775 [ 1270.964702] xen-blkback: backend/vbd/8/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 29 19:58:20.233717 (XEN) common/grant_table.c:1909:d8v3 Expanding d8 grant table from 1 to 2 frames Jun 29 19:58:20.257772 (XEN) common/grant_table.c:1909:d8v3 Expanding d8 grant table from 2 to 3 frames Jun 29 19:58:20.269723 [ 1271.063720] vif vif-8-0 vif8.0: Guest Rx ready Jun 29 19:58:20.329724 [ 1271.066976] xenbr0: port 2(vif8.0) entered blocking state Jun 29 19:58:20.329787 [ 1271.072312] xenbr0: port 2(vif8.0) entered forwarding state Jun 29 19:58:20.329835 [ 1288.663687] dwmmc_exynos 12200000.mmc: Unexpected interrupt latency Jun 29 19:58:37.933743 [ 1326.147265] xenbr0: port 2(vif8.0) entered disabled state Jun 29 19:59:15.409663 [ 1326.404043] xenbr0: port 2(vif8.0) entered disabled state Jun 29 19:59:15.673650 [ 1326.408450] vif vif-8-0 vif8.0 (unregistering): left allmulticast mode Jun 29 19:59:15.673685 [ 1326.414712] vif vif-8-0 vif8.0 (unregistering): left promiscuous mode Jun 29 19:59:15.685638 [ 1326.421183] xenbr0: port 2(vif8.0) entered disabled state Jun 29 19:59:15.685671 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 19:59:23.617641 [ 1360.503196] xenbr0: port 2(vif9.0) entered blocking state Jun 29 19:59:49.761715 [ 1360.507299] xenbr0: port 2(vif9.0) entered disabled state Jun 29 19:59:49.773702 [ 1360.512728] vif vif-9-0 vif9.0: entered allmulticast mode Jun 29 19:59:49.773736 [ 1360.518391] vif vif-9-0 vif9.0: entered promiscuous mode Jun 29 19:59:49.785633 (XEN) d9v0 Unhandled SMC/HVC: 0x8600ff01 Jun 29 19:59:50.913672 (XEN) d9v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:59:50.925674 (XEN) d9v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:59:50.961673 (XEN) d9v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:59:50.997643 (XEN) d9v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 19:59:51.033661 [ 1362.320742] xen-blkback: backend/vbd/9/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 29 19:59:51.585671 [ 1362.370538] xen-blkback: backend/vbd/9/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 29 19:59:51.633689 (XEN) common/grant_table.c:1909:d9v2 Expanding d9 grant table from 1 to 2 frames Jun 29 19:59:51.657689 (XEN) common/grant_table.c:1909:d9v2 Expanding d9 grant table from 2 to 3 frames Jun 29 19:59:51.669669 [ 1362.523575] vif vif-9-0 vif9.0: Guest Rx ready Jun 29 19:59:51.777737 [ 1362.527535] xenbr0: port 2(vif9.0) entered blocking state Jun 29 19:59:51.789709 [ 1362.532175] xenbr0: port 2(vif9.0) entered forwarding state Jun 29 19:59:51.789743 [ 1418.139976] xenbr0: port 2(vif9.0) entered disabled state Jun 29 20:00:47.397799 [ 1418.443831] xenbr0: port 2(vif9.0) entered disabled state Jun 29 20:00:47.709650 [ 1418.456987] vif vif-9-0 vif9.0 (unregistering): left allmulticast mode Jun 29 20:00:47.721723 [ 1418.462173] vif vif-9-0 vif9.0 (unregistering): left promiscuous mode Jun 29 20:00:47.721758 [ 1418.468769] xenbr0: port 2(vif9.0) entered disabled state Jun 29 20:00:47.733648 [ 1445.400830] xenbr0: port 2(vif10.0) entered blocking state Jun 29 20:01:14.661811 [ 1445.405003] xenbr0: port 2(vif10.0) entered disabled state Jun 29 20:01:14.673747 [ 1445.410528] vif vif-10-0 vif10.0: entered allmulticast mode Jun 29 20:01:14.673808 [ 1445.416373] vif vif-10-0 vif10.0: entered promiscuous mode Jun 29 20:01:14.685677 (XEN) d10v0 Unhandled SMC/HVC: 0x8600ff01 Jun 29 20:01:15.837699 (XEN) d10v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 20:01:15.849717 (XEN) d10v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 20:01:15.885718 (XEN) d10v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 20:01:15.921695 (XEN) d10v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 20:01:15.945752 [ 1447.197039] xen-blkback: backend/vbd/10/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 29 20:01:16.461741 [ 1447.242861] xen-blkback: backend/vbd/10/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 29 20:01:16.509734 (XEN) common/grant_table.c:1909:d10v3 Expanding d10 grant table from 1 to 2 frames Jun 29 20:01:16.533736 (XEN) common/grant_table.c:1909:d10v3 Expanding d10 grant table from 2 to 3 frames Jun 29 20:01:16.533803 [ 1447.338693] vif vif-10-0 vif10.0: Guest Rx ready Jun 29 20:01:16.605741 [ 1447.342729] xenbr0: port 2(vif10.0) entered blocking state Jun 29 20:01:16.605803 [ 1447.347548] xenbr0: port 2(vif10.0) entered forwarding state Jun 29 20:01:16.617665 [ 1505.115186] xenbr0: port 2(vif10.0) entered disabled state Jun 29 20:02:14.373820 [ 1505.394079] xenbr0: port 2(vif10.0) entered disabled state Jun 29 20:02:14.653826 [ 1505.398552] vif vif-10-0 vif10.0 (unregistering): left allmulticast mode Jun 29 20:02:14.665806 [ 1505.405065] vif vif-10-0 vif10.0 (unregistering): left promiscuous mode Jun 29 20:02:14.665842 [ 1505.411690] xenbr0: port 2(vif10.0) entered disabled state Jun 29 20:02:14.677779 [ 1532.445451] xenbr0: port 2(vif11.0) entered blocking state Jun 29 20:02:41.712596 [ 1532.449574] xenbr0: port 2(vif11.0) entered disabled state Jun 29 20:02:41.712596 [ 1532.455175] vif vif-11-0 vif11.0: entered allmulticast mode Jun 29 20:02:41.724625 [ 1532.460926] vif vif-11-0 vif11.0: entered promiscuous mode Jun 29 20:02:41.724625 (XEN) d11v0 Unhandled SMC/HVC: 0x8600ff01 Jun 29 20:02:42.850852 (XEN) d11v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 20:02:42.873721 (XEN) d11v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 20:02:42.909745 (XEN) d11v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 20:02:42.933628 (XEN) d11v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 20:02:42.969622 [ 1534.210166] xen-blkback: backend/vbd/11/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 29 20:02:43.473689 [ 1534.295864] xen-blkback: backend/vbd/11/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 29 20:02:43.557625 (XEN) common/grant_table.c:1909:d11v0 Expanding d11 grant table from 1 to 2 frames Jun 29 20:02:43.725790 (XEN) common/grant_table.c:1909:d11v0 Expanding d11 grant table from 2 to 3 frames Jun 29 20:02:43.737707 [ 1534.546175] vif vif-11-0 vif11.0: Guest Rx ready Jun 29 20:02:43.809700 [ 1534.549607] xenbr0: port 2(vif11.0) entered blocking state Jun 29 20:02:43.821674 [ 1534.560662] xenbr0: port 2(vif11.0) entered forwarding state Jun 29 20:02:43.821720 [ 1589.807003] xenbr0: port 2(vif11.0) entered disabled state Jun 29 20:03:39.065748 [ 1590.134914] xenbr0: port 2(vif11.0) entered disabled state Jun 29 20:03:39.401712 [ 1590.147287] vif vif-11-0 vif11.0 (unregistering): left allmulticast mode Jun 29 20:03:39.413775 [ 1590.152642] vif vif-11-0 vif11.0 (unregistering): left promiscuous mode Jun 29 20:03:39.413841 [ 1590.159454] xenbr0: port 2(vif11.0) entered disabled state Jun 29 20:03:39.425700 [ 1617.537624] xenbr0: port 2(vif12.0) entered blocking state Jun 29 20:04:06.797829 [ 1617.541749] xenbr0: port 2(vif12.0) entered disabled state Jun 29 20:04:06.797909 [ 1617.547372] vif vif-12-0 vif12.0: entered allmulticast mode Jun 29 20:04:06.809639 [ 1617.553141] vif vif-12-0 vif12.0: entered promiscuous mode Jun 29 20:04:06.809679 (XEN) d12v0 Unhandled SMC/HVC: 0x8600ff01 Jun 29 20:04:07.961756 (XEN) d12v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 20:04:07.973689 (XEN) d12v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 20:04:08.009641 (XEN) d12v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 20:04:08.045655 (XEN) d12v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 20:04:08.069610 [ 1619.429674] xen-blkback: backend/vbd/12/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 29 20:04:08.693743 [ 1619.543726] xen-blkback: backend/vbd/12/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 29 20:04:08.801776 (XEN) common/grant_table.c:1909:d12v0 Expanding d12 grant table from 1 to 2 frames Jun 29 20:04:08.825805 (XEN) common/grant_table.c:1909:d12v0 Expanding d12 grant table from 2 to 3 frames Jun 29 20:04:08.837959 [ 1619.671403] vif vif-12-0 vif12.0: Guest Rx ready Jun 29 20:04:08.933661 [ 1619.675852] xenbr0: port 2(vif12.0) entered blocking state Jun 29 20:04:08.933702 [ 1619.680238] xenbr0: port 2(vif12.0) entered forwarding state Jun 29 20:04:08.945644 [ 1653.063391] dwmmc_exynos 12200000.mmc: Unexpected interrupt latency Jun 29 20:04:42.329778 [ 1671.788059] xenbr0: port 2(vif12.0) entered disabled state Jun 29 20:05:01.053593 [ 1671.945710] xenbr0: port 2(vif12.0) entered disabled state Jun 29 20:05:01.209666 [ 1671.952196] vif vif-12-0 vif12.0 (unregistering): left allmulticast mode Jun 29 20:05:01.209666 [ 1671.957640] vif vif-12-0 vif12.0 (unregistering): left promiscuous mode Jun 29 20:05:01.221683 [ 1671.964267] xenbr0: port 2(vif12.0) entered disabled state Jun 29 20:05:01.221683 Jun 29 20:05:20.544981 (XEN) *** Serial input to Xen (type 'CTRL-x' three times to switch input) Jun 29 20:05:20.569776 Jun 29 20:05:20.571073 Jun 29 20:05:21.552224 (XEN) '0' pressed -> dumping Dom0's registers Jun 29 20:05:21.569815 (XEN) *** Dumping Dom0 vcpu#0 state: *** Jun 29 20:05:21.569874 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Jun 29 20:05:21.572280 Not tainted ]---- Jun 29 20:05:21.581699 (XEN) CPU: 0 Jun 29 20:05:21.581751 (XEN) PC: c031be28 Jun 29 20:05:21.581794 (XEN) CPSR: 600f0093 MODE:32-bit Guest SVC Jun 29 20:05:21.581840 (XEN) R0: 00000005 R1: 00000000 R2: 00266a81 R3: c031be20 Jun 29 20:05:21.593751 (XEN) R4: c1b09d40 R5: c1d26f50 R6: c1b04e5c R7: c1b04e98 Jun 29 20:05:21.593813 (XEN) R8: 00000000 R9: 00000000 R10:000000ad R11:00000000 R12:c1d264a0 Jun 29 20:05:21.605767 (XEN) USR: SP: bef218e4 LR: b69d2169 Jun 29 20:05:21.605826 (XEN) SVC: SP: c1b01f78 LR: c114e058 SPSR:600f0013 Jun 29 20:05:21.605873 (XEN) ABT: SP: c1d38b10 LR: c0300ec0 SPSR:600f0193 Jun 29 20:05:21.617672 (XEN) UND: SP: c1d38b20 LR: c0300fc0 SPSR:600f0093 Jun 29 20:05:21.617672 (XEN) IRQ: SP: c1d38b00 LR: c0300bc0 SPSR:600f0193 Jun 29 20:05:21.629756 (XEN) FIQ: SP: c1d38b30 LR: c1d38b30 SPSR:00000000 Jun 29 20:05:21.629821 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Jun 29 20:05:21.629871 (XEN) Jun 29 20:05:21.641756 (XEN) SCTLR: 10c5387d Jun 29 20:05:21.641813 (XEN) TCR: 00000000 Jun 29 20:05:21.641856 (XEN) TTBR0: 0000000069c3406a Jun 29 20:05:21.641899 (XEN) TTBR1: 000000006020406a Jun 29 20:05:21.641967 (XEN) IFAR: b6db2eb8, IFSR: 00000007 Jun 29 20:05:21.653763 (XEN) DFAR: 004f8318, DFSR: 0000081f Jun 29 20:05:21.653826 (XEN) Jun 29 20:05:21.653867 (XEN) VTCR_EL2: 80003558 Jun 29 20:05:21.653909 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 29 20:05:21.665761 (XEN) Jun 29 20:05:21.665813 (XEN) SCTLR_EL2: 30cd187f Jun 29 20:05:21.665856 (XEN) HCR_EL2: 007c663f Jun 29 20:05:21.665898 (XEN) TTBR0_EL2: 0000000041107000 Jun 29 20:05:21.665940 (XEN) Jun 29 20:05:21.665978 (XEN) ESR_EL2: 07e00000 Jun 29 20:05:21.677807 (XEN) HPFAR_EL2: 00104810 Jun 29 20:05:21.677864 (XEN) HDFAR: e0807f00 Jun 29 20:05:21.677906 (XEN) HIFAR: c0d9e04c Jun 29 20:05:21.677947 (XEN) Jun 29 20:05:21.677985 (XEN) Guest stack trace from sp=c1b01f78: Jun 29 20:05:21.689896 (XEN) Failed to convert stack to physical address Jun 29 20:05:21.689962 (XEN) *** Dumping Dom0 vcpu#1 state: *** Jun 29 20:05:21.690010 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Not tainted ]---- Jun 29 20:05:21.701804 (XEN) CPU: 0 Jun 29 20:05:21.701858 (XEN) PC: c031be28 Jun 29 20:05:21.701901 (XEN) CPSR: 600d0093 MODE:32-bit Guest SVC Jun 29 20:05:21.701946 (XEN) R0: 00000005 R1: 00000000 R2: 001f0551 R3: c031be20 Jun 29 20:05:21.713665 (XEN) R4: c2110880 R5: c1d26f50 R6: c1b04e5c R7: c1b04e98 Jun 29 20:05:21.713665 (XEN) R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:c1d264a0 Jun 29 20:05:21.725674 (XEN) USR: SP: beff6938 LR: b6c08853 Jun 29 20:05:21.725674 (XEN) SVC: SP: e08d9fa0 LR: c114e058 SPSR:000d0030 Jun 29 20:05:21.725674 (XEN) ABT: SP: c1d38b50 LR: c0301040 SPSR:600b0193 Jun 29 20:05:21.737661 (XEN) UND: SP: c1d38b60 LR: c0300fc0 SPSR:600d0093 Jun 29 20:05:21.737661 (XEN) IRQ: SP: c1d38b40 LR: c0300bc0 SPSR:60070193 Jun 29 20:05:21.749668 (XEN) FIQ: SP: c1d38b70 LR: c1d38b70 SPSR:00000000 Jun 29 20:05:21.749668 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Jun 29 20:05:21.761660 (XEN) Jun 29 20:05:21.761660 (XEN) SCTLR: 10c5387d Jun 29 20:05:21.761660 (XEN) TCR: 00000000 Jun 29 20:05:21.761939 (XEN) TTBR0: 0000000063fc806a Jun 29 20:05:21.761973 (XEN) TTBR1: 000000006020406a Jun 29 20:05:21.773661 (XEN) IFAR: b6e8ceb8, IFSR: 00000007 Jun 29 20:05:21.773661 (XEN) DFAR: b6b7bf18, DFSR: 00000017 Jun 29 20:05:21.773661 (XEN) Jun 29 20:05:21.773661 (XEN) VTCR_EL2: 80003558 Jun 29 20:05:21.773661 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 29 20:05:21.785670 (XEN) Jun 29 20:05:21.785670 (XEN) SCTLR_EL2: 30cd187f Jun 29 20:05:21.785670 (XEN) HCR_EL2: 007c663f Jun 29 20:05:21.785670 (XEN) TTBR0_EL2: 0000000041107000 Jun 29 20:05:21.785670 (XEN) Jun 29 20:05:21.785670 (XEN) ESR_EL2: 07e00000 Jun 29 20:05:21.797669 (XEN) HPFAR_EL2: 00104810 Jun 29 20:05:21.797669 (XEN) HDFAR: e0807f00 Jun 29 20:05:21.797669 (XEN) HIFAR: c0d9e04c Jun 29 20:05:21.797669 (XEN) Jun 29 20:05:21.797669 (XEN) Guest stack trace from sp=e08d9fa0: Jun 29 20:05:21.809628 (XEN) Failed to convert stack to physical address Jun 29 20:05:21.809628 Jun 29 20:05:23.552861 (XEN) 'H' pressed -> dumping heap info (now = 1699655753666) Jun 29 20:05:23.573914 (XEN) heap[node=0][zone=0] -> 16278 pages Jun 29 20:05:23.573914 (XEN) heap[node=0][zone=1] -> 0 Jun 29 20:05:23.576317 pages Jun 29 20:05:23.585664 (XEN) heap[node=0][zone=2] -> 0 pages Jun 29 20:05:23.585664 (XEN) heap[node=0][zone=3] -> 0 pages Jun 29 20:05:23.585664 (XEN) heap[node=0][zone=4] -> 0 pages Jun 29 20:05:23.585664 (XEN) heap[node=0][zone=5] -> 0 pages Jun 29 20:05:23.597745 (XEN) heap[node=0][zone=6] -> 0 pages Jun 29 20:05:23.597745 (XEN) heap[node=0][zone=7] -> 0 pages Jun 29 20:05:23.597745 (XEN) heap[node=0][zone=8] -> 0 pages Jun 29 20:05:23.609633 (XEN) heap[node=0][zone=9] -> 0 pages Jun 29 20:05:23.609633 (XEN) heap[node=0][zone=10] -> 0 pages Jun 29 20:05:23.609633 (XEN) heap[node=0][zone=11] -> 0 pages Jun 29 20:05:23.609633 (XEN) heap[node=0][zone=12] -> 0 pages Jun 29 20:05:23.621660 (XEN) heap[node=0][zone=13] -> 0 pages Jun 29 20:05:23.621660 (XEN) heap[node=0][zone=14] -> 0 pages Jun 29 20:05:23.621660 (XEN) heap[node=0][zone=15] -> 0 pages Jun 29 20:05:23.633661 (XEN) heap[node=0][zone=16] -> 0 pages Jun 29 20:05:23.633661 (XEN) heap[node=0][zone=17] -> 0 pages Jun 29 20:05:23.633661 (XEN) heap[node=0][zone=18] -> 0 pages Jun 29 20:05:23.633661 (XEN) heap[node=0][zone=19] -> 130833 pages Jun 29 20:05:23.645662 (XEN) heap[node=0][zone=20] -> 241603 pages Jun 29 20:05:23.645662 (XEN) heap[node=0][zone=21] -> 0 pages Jun 29 20:05:23.645662 (XEN) heap[node=0][zone=22] -> 0 pages Jun 29 20:05:23.657659 (XEN) heap[node=0][zone=23] -> 0 pages Jun 29 20:05:23.657659 (XEN) heap[node=0][zone=24] -> 0 pages Jun 29 20:05:23.657659 (XEN) heap[node=0][zone=25] -> 0 pages Jun 29 20:05:23.669638 (XEN) heap[node=0][zone=26] -> 0 pages Jun 29 20:05:23.669638 (XEN) heap[node=0][zone=27] -> 0 pages Jun 29 20:05:23.669638 (XEN) heap[node=0][zone=28] -> 0 pages Jun 29 20:05:23.669638 Jun 29 20:05:25.548168 Jun 29 20:05:27.309697 Jun 29 20:05:27.557244 Jun 29 20:05:29.315727 Jun 29 20:05:29.552321 (XEN) Dumping timer queues: Jun 29 20:05:29.573842 (XEN) CPU00: Jun 29 20:05:29.573895 (XEN) ex= 13962us timer=43ffcf98 cb=credit.c#csched_acct(43ffcf30) Jun 29 20:05:29.573946 (XEN) ex= Jun 29 20:05:29.576203 57386us timer=43fdc968 cb=vtimer.c#virt_timer_expired(43fdc960) Jun 29 20:05:29.585732 (XEN) CPU01: Jun 29 20:05:29.585781 (XEN) ex= 24229us timer=43fef968 cb=vtimer.c#virt_timer_expired(43fef960) Jun 29 20:05:29.597692 Jun 29 20:05:31.560326 Jun 29 20:05:33.324547 Jun 29 20:05:33.572015 (XEN) 'd' pressed -> dumping registers Jun 29 20:05:33.593834 (XEN) Jun 29 20:05:33.593888 (XEN) *** Dumping CPU0 host state: *** Jun 29 20:05:33.593933 (XEN) ----[ Xen-4.19-unstable arm32 debug=y N Jun 29 20:05:33.596316 ot tainted ]---- Jun 29 20:05:33.605726 (XEN) CPU: 0 Jun 29 20:05:33.605778 (XEN) PC: 0025ef7c domain.c#idle_loop+0x130/0x1ac Jun 29 20:05:33.605826 (XEN) CPSR: 600d005a MODE:Hypervisor Jun 29 20:05:33.605870 (XEN) R0: 00000000 R1: 0029f300 R2: 00000000 R3: 00000000 Jun 29 20:05:33.617782 (XEN) R4: 00000000 R5: 002f80e0 R6: 0032b324 R7: 00000001 Jun 29 20:05:33.617843 (XEN) R8: 0032b104 R9: 00000000 R10:40e00000 R11:4003ff54 R12:fffffffc Jun 29 20:05:33.629796 (XEN) HYP: SP: 4003ff44 LR: 00225cb8 Jun 29 20:05:33.629854 (XEN) Jun 29 20:05:33.629893 (XEN) VTCR_EL2: 80003558 Jun 29 20:05:33.629934 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 29 20:05:33.641758 (XEN) Jun 29 20:05:33.641810 (XEN) SCTLR_EL2: 30cd187f Jun 29 20:05:33.641853 (XEN) HCR_EL2: 007c663f Jun 29 20:05:33.641894 (XEN) TTBR0_EL2: 0000000041107000 Jun 29 20:05:33.641936 (XEN) Jun 29 20:05:33.641973 (XEN) ESR_EL2: 07e00000 Jun 29 20:05:33.653790 (XEN) HPFAR_EL2: 00104810 Jun 29 20:05:33.653845 (XEN) HDFAR: e0807f00 Jun 29 20:05:33.653888 (XEN) HIFAR: c0d9e04c Jun 29 20:05:33.653929 (XEN) Jun 29 20:05:33.653967 (XEN) Xen stack trace from sp=4003ff44: Jun 29 20:05:33.665798 (XEN) 07e00000 00295014 002919b0 4003ff4c 00267818 00000000 00000000 00000000 Jun 29 20:05:33.665862 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 29 20:05:33.677793 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 29 20:05:33.677855 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 29 20:05:33.689859 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 29 20:05:33.701844 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 29 20:05:33.701905 (XEN) Xen call trace: Jun 29 20:05:33.701947 (XEN) [<0025ef7c>] domain.c#idle_loop+0x130/0x1ac (PC) Jun 29 20:05:33.713833 (XEN) [<00225cb8>] rcu_needs_cpu+0x40/0x60 (LR) Jun 29 20:05:33.713893 (XEN) [<00267818>] arch_get_xen_caps+0/0x90 Jun 29 20:05:33.713939 (XEN) Jun 29 20:05:33.725832 (XEN) *** Dumping CPU1 host state: *** Jun 29 20:05:33.725890 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Not tainted ]---- Jun 29 20:05:33.725939 (XEN) CPU: 1 Jun 29 20:05:33.725978 (XEN) PC: 0025ef7c domain.c#idle_loop+0x130/0x1ac Jun 29 20:05:33.737834 (XEN) CPSR: 6001005a MODE:Hypervisor Jun 29 20:05:33.737892 (XEN) R0: 00000000 R1: 0029f300 R2: 3fd0e000 R3: 00000000 Jun 29 20:05:33.749832 (XEN) R4: 00000001 R5: 002f80e0 R6: 0032b324 R7: 00000002 Jun 29 20:05:33.749893 (XEN) R8: 0032b104 R9: 00000001 R10:40e00000 R11:4000ff54 R12:fffffffc Jun 29 20:05:33.761749 (XEN) HYP: SP: 4000ff44 LR: 00225cb8 Jun 29 20:05:33.761843 (XEN) Jun 29 20:05:33.761887 (XEN) VTCR_EL2: 80003558 Jun 29 20:05:33.761929 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 29 20:05:33.761971 (XEN) Jun 29 20:05:33.762009 (XEN) SCTLR_EL2: 30cd187f Jun 29 20:05:33.773759 (XEN) HCR_EL2: 007c663f Jun 29 20:05:33.773815 (XEN) TTBR0_EL2: 00000000ba004000 Jun 29 20:05:33.773858 (XEN) Jun 29 20:05:33.773896 (XEN) ESR_EL2: 07e00000 Jun 29 20:05:33.773936 (XEN) HPFAR_EL2: 00104810 Jun 29 20:05:33.785775 (XEN) HDFAR: e0807f00 Jun 29 20:05:33.785831 (XEN) HIFAR: c0ac9320 Jun 29 20:05:33.785873 (XEN) Jun 29 20:05:33.785912 (XEN) Xen stack trace from sp=4000ff44: Jun 29 20:05:33.785956 (XEN) 07e00000 002f9290 00000001 4000ff3c 002680f4 00000000 00000000 00000000 Jun 29 20:05:33.797829 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 29 20:05:33.809829 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 29 20:05:33.809891 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 29 20:05:33.821832 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 29 20:05:33.821894 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 29 20:05:33.833842 (XEN) Xen call trace: Jun 29 20:05:33.833897 (XEN) [<0025ef7c>] domain.c#idle_loop+0x130/0x1ac (PC) Jun 29 20:05:33.833946 (XEN) [<00225cb8>] rcu_needs_cpu+0x40/0x60 (LR) Jun 29 20:05:33.845824 (XEN) [<002680f4>] start_secondary+0x204/0x20c Jun 29 20:05:33.845883 (XEN) Jun 29 20:05:33.845922 Jun 29 20:05:35.655332 (XEN) 'e' pressed -> dumping event-channel info Jun 29 20:05:35.673860 (XEN) Event channel information for domain 0: Jun 29 20:05:35.673921 (XEN) Polling vCPUs: {} Jun 29 20:05:35.673963 (XEN) port Jun 29 20:05:35.676223 [p/m/s] Jun 29 20:05:35.685719 (XEN) 1 [0/0/ - ]: s=3 n=1 x=0 d=0 p=4 Jun 29 20:05:35.685777 (XEN) 2 [0/0/ - ]: s=5 n=0 x=0 v=2 Jun 29 20:05:35.685823 (XEN) 3 [0/0/ - ]: s=5 n=1 x=0 v=3 Jun 29 20:05:35.697805 (XEN) 4 [0/0/ - ]: s=3 n=0 x=0 d=0 p=1 Jun 29 20:05:35.697864 Jun 29 20:05:37.572415 (XEN) gnttab_usage_print_all [ key 'g' pressed Jun 29 20:05:37.593776 (XEN) -------- active -------- -------- shared -------- Jun 29 20:05:37.593837 (XEN) [ref] localdo Jun 29 20:05:37.596181 m mfn pin localdom gmfn flags Jun 29 20:05:37.605677 (XEN) grant-table for remote d0 (v1) Jun 29 20:05:37.605731 (XEN) 1 frames (64 max), 4 maptrack frames (1024 max) Jun 29 20:05:37.617792 (XEN) no active grant table entries Jun 29 20:05:37.617849 (XEN) gnttab_usage_print_all ] done Jun 29 20:05:37.617894 Jun 29 20:05:39.583851 Jun 29 20:05:41.340478 Jun 29 20:05:41.584517 (XEN) Physical memory information: Jun 29 20:05:41.601835 (XEN) Xen heap: 65112kB free Jun 29 20:05:41.601895 (XEN) heap[19]: 523332kB free Jun 29 20:05:41.601940 (XEN) heap[20]: 966412kB fr Jun 29 20:05:41.604213 ee Jun 29 20:05:41.613670 (XEN) Dom heap: 1489744kB free Jun 29 20:05:41.613726 Jun 29 20:05:43.588161 Jun 29 20:05:45.350456 Jun 29 20:05:45.586439 (XEN) sched_smt_power_savings: disabled Jun 29 20:05:45.645854 (XEN) NOW=1721686939208 Jun 29 20:05:45.645893 (XEN) Online Cpus: 0-1 Jun 29 20:05:45.645918 (XEN) Cpupool 0: Jun 29 20:05:45.645970 (XEN) Cpus: 0-1 Jun 29 20:05:45.646010 (XEN) Sched Jun 29 20:05:45.646129 uling granularity: cpu, 1 CPU per sched-resource Jun 29 20:05:45.646252 (XEN) Scheduler: SMP Credit Scheduler (credit) Jun 29 20:05:45.646300 (XEN) info: Jun 29 20:05:45.646340 (XEN) ncpus = 2 Jun 29 20:05:45.646382 (XEN) master = 0 Jun 29 20:05:45.646425 (XEN) credit = 600 Jun 29 20:05:45.646467 (XEN) credit balance = 296 Jun 29 20:05:45.646515 (XEN) weight = 512 Jun 29 20:05:45.646941 (XEN) runq_sort = 52510 Jun 29 20:05:45.646986 (XEN) default-weight = 256 Jun 29 20:05:45.647052 (XEN) tslice = 30ms Jun 29 20:05:45.647076 (XEN) ratelimit = 1000us Jun 29 20:05:45.647099 (XEN) credits per msec = 10 Jun 29 20:05:45.649693 (XEN) ticks per tslice = 3 Jun 29 20:05:45.649750 (XEN) migration delay = 0us Jun 29 20:05:45.649795 (XEN) idlers: 2 Jun 29 20:05:45.649835 (XEN) active units: Jun 29 20:05:45.649876 (XEN) 1: [0.1] pri=-1 flags=0 cpu=0 credit=295 [w=256,cap=0] Jun 29 20:05:45.661738 (XEN) 2: [0.0] pri=-1 flags=0 cpu=1 credit=293 [w=256,cap=0] Jun 29 20:05:45.661797 (XEN) CPUs info: Jun 29 20:05:45.673689 (XEN) CPU[00] current=d[IDLE]v0, curr=d[IDLE]v0, prev=NULL Jun 29 20:05:45.673738 (XEN) CPU[00] nr_run=1, sort=52510, sibling={0}, core={0-1} Jun 29 20:05:45.673764 (XEN) CPU[01] current=d[IDLE]v1, curr=d[IDLE]v1, prev=NULL Jun 29 20:05:45.685654 (XEN) CPU[01] nr_run=0, sort=52510, sibling={1}, core={0-1} Jun 29 20:05:45.685684 Jun 29 20:05:47.599938 Jun 29 20:05:49.359959 Jun 29 20:05:49.596598 (XEN) Synced stime skew: max=84ns avg=84ns samples=1 current=84ns Jun 29 20:05:49.621838 (XEN) Synced cycles skew: max=1 avg=1 samples=1 current=1 Jun 29 20:05:49.621901 Jun 29 20:05:49.624014 Jun 29 20:05:51.608890 Jun 29 20:05:53.369875 Jun 29 20:05:53.608446 Jun 29 20:05:55.376880 Jun 29 20:05:55.610431 Jun 29 20:05:57.386247 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 20:06:04.780468 Jun 29 20:06:07.628405 (XEN) 'q' pressed -> dumping domain info (now = 1743731193750) Jun 29 20:06:07.648746 (XEN) General information for domain 0: Jun 29 20:06:07.648746 (XEN) refcnt=3 dying=0 paus Jun 29 20:06:07.651050 e_count=0 Jun 29 20:06:07.659341 (XEN) nr_pages=131072 xenheap_pages=2 dirty_cpus={} max_pages=131072 Jun 29 20:06:07.659341 (XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=00000020 Jun 29 20:06:07.671057 (XEN) p2m mappings for domain 0 (vmid 1): Jun 29 20:06:07.671153 (XEN) 1G mappings: 0 (shattered 0) Jun 29 20:06:07.671200 (XEN) 2M mappings: 232 (shattered 24) Jun 29 20:06:07.684697 (XEN) 4K mappings: 7119 Jun 29 20:06:07.684697 (XEN) Rangesets belonging to domain 0: Jun 29 20:06:07.684697 (XEN) Interrupts { 32-72, 74, 77-79, 82-84, 86, 88-100, 103-104, 107-110, 114, 116-120, 123, 126-128, 138, 144, 146-147, 149-151, 156 } Jun 29 20:06:07.696636 (XEN) I/O Memory { 2020-2050, 3810-3811, 3830-3831, 3860-3861, 10000-10001, 10010-10045, 10050-10055, 10060-10061, 101b0-101b1, 101d0-101d1, 101e0-101e1, 10440-10441, 10800-10801, 10830-10831, 10850-10851, 10a60-10a61, 10d10-10d11, 11000-11010, 11200-11201, 11210-11211, 11400-11401, 11800-11805, 11c00-11c01, 11c10-11c11, 11d40-11d41, 11f20-11f21, 12000-12010, 12100-12101, 12110-12111, 12120-12121, 12130-12131, 12170-12171, 121a0-121a1, 121b0-121b1, 121d0-121d1, 12200-12201, 12210-12211, 12220-12221, 12230-12231, 12250-12251, 122f0-122f1, 12c00-12c01, 12c10-12c11, 12c30-12c31, 12c60-12c61, 12c70-12c71, 12c80-12c81, 12c90-12c91, 12ca0-12ca1, 12cb0-12cb1, 12cc0-12cc1, 12cd0-12cd1, 12ce0-12ce1, 12d10-12d11, 12d20-12d21, 12d30-12d31, 12d40-12d41, 12d60-12d61, 12d70-12d71, 12dd0-12dd1, 13260-13261, 13270-13271, 13280-13281, 13290-13291, 132a0-132a1, 132b0-132b1, 132c0-132c1, 132d0-132d1, 132e0-132e1, 132f0-132f1, 13400-13401, 13c40-13c41, 13c50-13c51, 13e00-13e01, 13e10-13e11, 13e20-13e21, 13e30-13e31, 13e80-13e81, 13e90-13e91, 13ea0-13ea1, 13eb0-13eb1, 14400-14440, 14450-14460, 14500-14510, 14530-145a0, 145b0-145b1, 14640-14641, 14650-14651 } Jun 29 20:06:07.792858 (XEN) NODE affinity for domain 0: [0] Jun 29 20:06:07.804823 (XEN) VCPU information and callbacks for domain 0: Jun 29 20:06:07.804883 (XEN) UNIT0 affinities: hard={0-1} soft={0-1} Jun 29 20:06:07.804929 (XEN) VCPU0: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Jun 29 20:06:07.816831 (XEN) pause_count=0 pause_flags=1 Jun 29 20:06:07.816889 (XEN) GICH_LRs (vcpu 0) mask=0 Jun 29 20:06:07.816933 (XEN) VCPU_LR[0]=0 Jun 29 20:06:07.828823 (XEN) VCPU_LR[1]=0 Jun 29 20:06:07.828878 (XEN) VCPU_LR[2]=0 Jun 29 20:06:07.828920 (XEN) VCPU_LR[3]=0 Jun 29 20:06:07.828960 (XEN) No periodic timer Jun 29 20:06:07.829001 (XEN) UNIT1 affinities: hard={0-1} soft={0-1} Jun 29 20:06:07.840834 (XEN) VCPU1: CPU0 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Jun 29 20:06:07.840897 (XEN) pause_count=0 pause_flags=0 Jun 29 20:06:07.840941 (XEN) GICH_LRs (vcpu 1) mask=0 Jun 29 20:06:07.852821 (XEN) VCPU_LR[0]=0 Jun 29 20:06:07.852876 (XEN) VCPU_LR[1]=0 Jun 29 20:06:07.852918 (XEN) VCPU_LR[2]=0 Jun 29 20:06:07.852957 (XEN) VCPU_LR[3]=0 Jun 29 20:06:07.852997 (XEN) Inflight irq=27 lr=255 Jun 29 20:06:07.864824 (XEN) Pending irq=27 Jun 29 20:06:07.864879 (XEN) No periodic timer Jun 29 20:06:07.864921 (XEN) Notifying guest 0:0 (virq 1, port 0) Jun 29 20:06:07.864965 (XEN) Notifying guest 0:1 (virq 1, port 0) Jun 29 20:06:07.876730 Jun 29 20:06:19.636179 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 29 20:06:19.649882 Jun 29 20:06:19.649935 arndale-metrocen Jun 29 20:06:19.651631 tre login: [ 1832.486588] sd 0:0:0:0: [sda] Synchronizing SCSI cache Jun 29 20:07:41.749620 [ 1832.499202] wake enabled for irq 119 (gpx1-4) Jun 29 20:07:41.761761 [ 1832.502201] wake enabled for irq 120 (gpx1-5) Jun 29 20:07:41.761761 [ 1832.506670] wake enabled for irq 121 (gpx1-6) Jun 29 20:07:41.761761 [ 1832.511054] wake enabled for irq 122 (gpx1-7) Jun 29 20:07:41.773651 [ 1832.515519] wake enabled for irq 123 (gpx2-0) Jun 29 20:07:41.773651 [ 1832.519907] wake enabled for irq 124 (gpx2-1) Jun 29 20:07:41.773651 [ 1832.524799] reboot: Resô Jun 29 20:07:42.121782 Jun 29 20:07:42.121809 Jun 29 20:07:42.121881 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 29 20:07:42.121934 Jun 29 20:07:42.121998 CPU: Exynos5250@1000MHz Jun 29 20:07:42.122043 Jun 29 20:07:42.122080 Board: Arndale Jun 29 20:07:42.122120 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 29 20:07:42.133737 ready Jun 29 20:07:42.133789 DRAM: 2 GiB Jun 29 20:07:42.133829 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 29 20:07:42.145755 trace: enabled Jun 29 20:07:42.185663 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 29 20:07:42.545619 i2c_init: failed to init bus 0 for speed = 100000 Jun 29 20:07:42.605653 In: serial Jun 29 20:07:42.605653 Out: serial Jun 29 20:07:42.605653 Err: serial Jun 29 20:07:42.605653 SCSI: ARNDALE SCSI INIT Jun 29 20:07:42.617644 Target spinup took 0 ms. Jun 29 20:07:42.617644 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 29 20:07:42.617644 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 29 20:07:42.629720 Net: Net Initialization Skipped Jun 29 20:07:42.629720 No ethernet found. Jun 29 20:07:42.629720 Hostname: arndale-metrocentre Jun 29 20:07:42.641731 Hit any key to stop autoboot: 2  1  0 Jun 29 20:07:44.561699 (Re)start USB... Jun 29 20:07:44.561751 USB0: USB EHCI 1.00 Jun 29 20:07:44.561775 scanning bus 0 for devices... 4 USB Device(s) found Jun 29 20:07:50.157618 scanning usb for storage devices... 0 Storage Device(s) found Jun 29 20:07:50.169622 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 29 20:07:50.617717 Waiting for Ethernet connection... done. Jun 29 20:07:52.213778 BOOTP broadcast 1 Jun 29 20:07:52.213844 BOOTP broadcast 2 Jun 29 20:07:55.117634 DHCP client bound to address 10.149.64.44 (3019 ms) Jun 29 20:07:55.117634 Using asx0 device Jun 29 20:07:55.117634 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 29 20:07:55.117634 Filename 'pxelinux.0'. Jun 29 20:07:55.117634 Load address: 0x43e00000 Jun 29 20:07:55.129678 Loading: *### Jun 29 20:07:55.653696 74.2 KiB/s Jun 29 20:07:55.665744 done Jun 29 20:07:55.665795 Bytes transferred = 42430 (a5be hex) Jun 29 20:07:55.665841 missing environment variable: pxeuuid Jun 29 20:07:55.665885 Retrieving file: pxelinux.cfg/0A95402C Jun 29 20:07:55.665929 Using asx0 device Jun 29 20:07:55.677737 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 29 20:07:55.677798 Filename 'pxelinux.cfg/0A95402C'. Jun 29 20:07:55.677842 Load address: 0x51000000 Jun 29 20:07:55.677883 Loading: *# Jun 29 20:07:55.741748 12.7 KiB/s Jun 29 20:07:55.741802 done Jun 29 20:07:55.741841 Bytes transferred = 734 (2de hex) Jun 29 20:07:55.741883 Config file found Jun 29 20:07:55.741923 Ignoring unknown command: serial Jun 29 20:07:55.741966 1: ^Overwrite Jun 29 20:07:55.742004 Retrieving file: /osstest/tmp//arndale-metrocentre--initrd.gz Jun 29 20:07:55.753512 Using asx0 device Jun 29 20:07:55.753512 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 29 20:07:55.753512 Filename '/osstest/tmp//arndale-metrocentre--initrd.gz'. Jun 29 20:07:55.765479 Load address: 0x43300000 Jun 29 20:07:55.765479 Loading: *################################################################# Jun 29 20:08:04.885684 ################################################################# Jun 29 20:08:05.209728 ################################################################# Jun 29 20:08:05.545713 ################################################################# Jun 29 20:08:05.858185 ################################################################# Jun 29 20:08:06.169642 ################################################################# Jun 29 20:08:06.469703 ################################################################# Jun 29 20:08:06.757694 ################################################################# Jun 29 20:08:07.069750 ################################################################# Jun 29 20:08:07.381696 ################################################################# Jun 29 20:08:07.681699 ################################################################# Jun 29 20:08:07.961782 ################################################################# Jun 29 20:08:08.249835 ################################################################# Jun 29 20:08:08.537762 ################################################################# Jun 29 20:08:08.849802 ################################################################# Jun 29 20:08:09.173682 ################################################################# Jun 29 20:08:09.485733 ################################################################# Jun 29 20:08:09.797670 ################################################################# Jun 29 20:08:10.097773 ################################################################# Jun 29 20:08:10.409749 ################################################################# Jun 29 20:08:10.737769 ################################################################# Jun 29 20:08:11.057740 ################################################################# Jun 29 20:08:11.321585 ################################################################# Jun 29 20:08:11.609719 ################################################################# Jun 29 20:08:11.877542 ################################################################# Jun 29 20:08:12.149700 ################################################################# Jun 29 20:08:12.401689 ################################################################# Jun 29 20:08:12.701688 ###################################### Jun 29 20:08:12.869718 1.4 MiB/s Jun 29 20:08:12.869773 done Jun 29 20:08:12.869829 Bytes transferred = 26310353 (19176d1 hex) Jun 29 20:08:12.869902 Retrieving file: /osstest/debian-installer/armhf/2024-03-26-bookworm/linux Jun 29 20:08:12.881723 Using asx0 device Jun 29 20:08:12.881778 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 29 20:08:12.893790 Filename '/osstest/debian-installer/armhf/2024-03-26-bookworm/linux'. Jun 29 20:08:12.893853 Load address: 0x42000000 Jun 29 20:08:12.905687 Loading: *################################################################# Jun 29 20:08:13.229690 ################################################################# Jun 29 20:08:13.553740 ################################################################# Jun 29 20:08:13.873615 ################################################################# Jun 29 20:08:14.193905 ################################################################# Jun 29 20:08:14.517667 ############################################# Jun 29 20:08:14.733691 2.7 MiB/s Jun 29 20:08:14.733746 done Jun 29 20:08:14.733788 Bytes transferred = 5423616 (52c200 hex) Jun 29 20:08:14.745810 append: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-metrocentre url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=42188 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-metrocentre--initrd.gz --- console=ttySAC2,115200n8 Jun 29 20:08:14.781780 Retrieving file: /osstest/debian-installer/armhf/2024-03-26-bookworm/dtbs/exynos5250-arndale.dtb Jun 29 20:08:14.793769 Using asx0 device Jun 29 20:08:14.793822 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 29 20:08:14.805808 Filename '/osstest/debian-installer/armhf/2024-03-26-bookworm/dtbs/exynos5250-arndale.dtb'. Jun 29 20:08:14.805879 Load address: 0x43000000 Jun 29 20:08:14.805921 Loading: *#### Jun 29 20:08:14.829728 2.3 MiB/s Jun 29 20:08:14.829782 done Jun 29 20:08:14.829821 Bytes transferred = 46686 (b65e hex) Jun 29 20:08:14.829865 Kernel image @ 0x42000000 [ 0x000000 - 0x52c200 ] Jun 29 20:08:14.841746 ## Flattened Device Tree blob at 43000000 Jun 29 20:08:14.841804 Booting using the fdt blob at 0x43000000 Jun 29 20:08:14.841849 Loading Ramdisk to 4e6e8000, end 4ffff6d1 ... OK Jun 29 20:08:15.273733 Loading Device Tree to 4e6d9000, end 4e6e765d ... OK Jun 29 20:08:15.273797 Jun 29 20:08:15.285750 Starting kernel ...(fake run for tracing) Jun 29 20:08:15.285750 Jun 29 20:08:15.285750 Jun 29 20:08:15.285750 Starting kernel ... Jun 29 20:08:15.285750 Jun 29 20:08:15.285750 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 29 20:08:21.341591 [ 0.000000] Linux version 6.1.0-18-armmp (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.76-1 (2024-02-01) Jun 29 20:08:21.365636 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 29 20:08:21.365636 [ 0.000000] CPU: div instructions available: patching division code Jun 29 20:08:21.377625 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 29 20:08:21.377625 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 29 20:08:21.389643 [ 0.000000] Memory policy: Data cache writealloc Jun 29 20:08:21.401627 [ 0.000000] efi: UEFI not found. Jun 29 20:08:21.401862 [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 Jun 29 20:08:21.401903 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 29 20:08:21.401903 [ 0.000000] Zone ranges: Jun 29 20:08:21.413627 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Jun 29 20:08:21.413627 [ 0.000000] Normal empty Jun 29 20:08:21.413627 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Jun 29 20:08:21.425598 [ 0.000000] Movable zone start for each node Jun 29 20:08:21.425598 [ 0.000000] Early memory node ranges Jun 29 20:08:21.437634 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Jun 29 20:08:21.437634 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Jun 29 20:08:21.449627 [ 0.000000] percpu: Embedded 18 pages/cpu s41620 r8192 d23916 u73728 Jun 29 20:08:21.449627 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Jun 29 20:08:21.461664 [ 0.000000] Kernel command line: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-metrocentre url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=42188 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-metrocentre--initrd.gz --- console=ttySAC2,115200n8 Jun 29 20:08:21.509717 [ 0.000000] Unknown kernel command line parameters "preseed --- vga=normal auto=true hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=42188 domain=test-lab.xenproject.org", will be passed to user space. Jun 29 20:08:21.545686 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Jun 29 20:08:21.545725 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 29 20:08:21.557683 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Jun 29 20:08:21.569696 [ 0.000000] Memory: 2015996K/2097152K available (11264K kernel code, 1696K rwdata, 3716K rodata, 2048K init, 378K bss, 64772K reserved, 16384K cma-reserved, 1294332K highmem) Jun 29 20:08:21.581705 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 29 20:08:21.581741 [ 0.000000] ftrace: allocating 39582 entries in 117 pages Jun 29 20:08:21.593696 [ 0.000000] ftrace: allocated 116 pages with 4 groups Jun 29 20:08:21.593729 [ 0.000000] trace event string verifier disabled Jun 29 20:08:21.605679 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 29 20:08:21.605713 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Jun 29 20:08:21.617708 [ 0.000000] Rude variant of Tasks RCU enabled. Jun 29 20:08:21.617742 [ 0.000000] Tracing variant of Tasks RCU enabled. Jun 29 20:08:21.617768 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Jun 29 20:08:21.629737 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 29 20:08:21.629772 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 29 20:08:21.641699 [ 0.000000] GIC: Using split EOI/Deactivate mode Jun 29 20:08:21.641737 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 29 20:08:21.653629 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 29 20:08:21.653629 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Jun 29 20:08:21.665647 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Jun 29 20:08:21.677711 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Jun 29 20:08:21.677754 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Jun 29 20:08:21.689675 [ 0.002637] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Jun 29 20:08:21.689712 [ 0.002651] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 29 20:08:21.701646 [ 0.002666] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 29 20:08:21.713680 [ 0.002678] Ignoring duplicate/late registration of read_current_timer delay Jun 29 20:08:21.725672 [ 0.003046] Console: colour dummy device 80x30 Jun 29 20:08:21.725704 [ 0.003085] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Jun 29 20:08:21.737641 [ 0.003099] CPU: Testing write buffer coherency: ok Jun 29 20:08:21.737673 [ 0.003141] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 29 20:08:21.753678 [ 0.003149] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 29 20:08:21.753709 [ 0.003155] pid_max: default: 32768 minimum: 301 Jun 29 20:08:21.765643 [ 0.003513] LSM: Security Framework initializing Jun 29 20:08:21.765676 [ 0.003586] landlock: Up and running. Jun 29 20:08:21.765701 [ 0.003590] Yama: disabled by default; enable with sysctl kernel.yama.* Jun 29 20:08:21.777631 [ 0.003775] AppArmor: AppArmor initialized Jun 29 20:08:21.777661 [ 0.003787] TOMOYO Linux initialized Jun 29 20:08:21.777686 [ 0.003829] LSM support for eBPF active Jun 29 20:08:21.789679 [ 0.004073] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 29 20:08:21.789716 [ 0.004088] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 29 20:08:21.801668 [ 0.005520] /cpus/cpu@0 missing clock-frequency property Jun 29 20:08:21.801702 [ 0.005546] /cpus/cpu@1 missing clock-frequency property Jun 29 20:08:21.813697 [ 0.005558] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 29 20:08:21.813731 [ 0.006512] cblist_init_generic: Setting adjustable number of callback queues. Jun 29 20:08:21.825666 [ 0.006518] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 29 20:08:21.837678 [ 0.006623] cblist_init_generic: Setting adjustable number of callback queues. Jun 29 20:08:21.837716 [ 0.006628] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 29 20:08:21.849681 [ 0.006776] Setting up static identity map for 0x40300000 - 0x403000ac Jun 29 20:08:21.849715 [ 0.007946] rcu: Hierarchical SRCU implementation. Jun 29 20:08:21.861642 [ 0.007951] rcu: Max phase no-delay instances is 1000. Jun 29 20:08:21.861677 [ 0.010099] EFI services will not be available. Jun 29 20:08:21.861702 [ 0.010448] smp: Bringing up secondary CPUs ... Jun 29 20:08:21.873643 [ 0.011197] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 29 20:08:21.873675 [ 0.011209] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 29 20:08:21.885617 [ 0.011342] smp: Brought up 1 node, 2 CPUs Jun 29 20:08:21.885617 [ 0.011351] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 29 20:08:21.897634 [ 0.011359] CPU: All CPU(s) started in HYP mode. Jun 29 20:08:21.897634 [ 0.011363] CPU: Virtualization extensions available. Jun 29 20:08:21.909632 [ 0.012022] devtmpfs: initialized Jun 29 20:08:21.909632 [ 0.023065] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 29 20:08:21.921568 [ 0.023317] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Jun 29 20:08:21.921568 [ 0.023342] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 29 20:08:21.933694 [ 0.023822] pinctrl core: initialized pinctrl subsystem Jun 29 20:08:21.933732 [ 0.024551] DMI not present or invalid. Jun 29 20:08:21.945610 [ 0.025229] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 29 20:08:21.945610 [ 0.030611] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 29 20:08:21.957618 [ 0.032177] audit: initializing netlink subsys (disabled) Jun 29 20:08:21.957618 [ 0.032379] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 Jun 29 20:08:21.969665 [ 0.033548] thermal_sys: Registered thermal governor 'fair_share' Jun 29 20:08:21.969728 [ 0.033554] thermal_sys: Registered thermal governor 'bang_bang' Jun 29 20:08:21.981798 [ 0.033559] thermal_sys: Registered thermal governor 'step_wise' Jun 29 20:08:21.981798 [ 0.033564] thermal_sys: Registered thermal governor 'user_space' Jun 29 20:08:21.993630 [ 0.033568] thermal_sys: Registered thermal governor 'power_allocator' Jun 29 20:08:21.993630 [ 0.033935] No ATAGs? Jun 29 20:08:22.005624 [ 0.034005] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jun 29 20:08:22.005624 [ 0.034013] hw-breakpoint: maximum watchpoint size is 8 bytes. Jun 29 20:08:22.017703 [ 0.035097] Serial: AMBA PL011 UART driver Jun 29 20:08:22.017740 [ 0.091536] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Jun 29 20:08:22.029690 [ 0.102610] iommu: Default domain type: Translated Jun 29 20:08:22.029723 [ 0.102618] iommu: DMA domain TLB invalidation policy: strict mode Jun 29 20:08:22.041678 [ 0.103589] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Jun 29 20:08:22.041712 [ 0.104167] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 29 20:08:22.053680 [ 0.104178] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 29 20:08:22.053714 [ 0.104692] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 29 20:08:22.065699 [ 0.104721] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 29 20:08:22.077679 [ 0.104903] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 29 20:08:22.077712 [ 0.105260] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 29 20:08:22.077738 [ 0.105270] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 29 20:08:22.089694 [ 0.105674] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 29 20:08:22.089727 [ 0.105962] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 29 20:08:22.101702 [ 0.105971] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 29 20:08:22.101736 [ 0.106246] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 29 20:08:22.113702 [ 0.106345] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 29 20:08:22.113735 [ 0.106354] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 29 20:08:22.125692 [ 0.106552] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 29 20:08:22.125726 [ 0.106749] pps_core: LinuxPPS API ver. 1 registered Jun 29 20:08:22.125752 [ 0.106754] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 29 20:08:22.137705 [ 0.106770] PTP clock support registered Jun 29 20:08:22.149713 [ 0.108347] NetLabel: Initializing Jun 29 20:08:22.149745 [ 0.108353] NetLabel: domain hash size = 128 Jun 29 20:08:22.149770 [ 0.108358] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Jun 29 20:08:22.161700 [ 0.108411] NetLabel: unlabeled traffic allowed by default Jun 29 20:08:22.161733 [ 0.108572] vgaarb: loaded Jun 29 20:08:22.161757 [ 0.109187] clocksource: Switched to clocksource mct-frc Jun 29 20:08:22.173698 [ 0.109803] VFS: Disk quotas dquot_6.6.0 Jun 29 20:08:22.173730 [ 0.109898] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jun 29 20:08:22.185697 [ 0.110633] AppArmor: AppArmor Filesystem Enabled Jun 29 20:08:22.185730 [ 0.120384] NET: Registered PF_INET protocol family Jun 29 20:08:22.185756 [ 0.120577] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Jun 29 20:08:22.197705 [ 0.122044] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 29 20:08:22.209698 [ 0.122145] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 29 20:08:22.209734 [ 0.122170] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Jun 29 20:08:22.221678 [ 0.122270] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Jun 29 20:08:22.233698 [ 0.122500] TCP: Hash tables configured (established 8192 bind 8192) Jun 29 20:08:22.233732 [ 0.122722] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Jun 29 20:08:22.245683 [ 0.122837] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 29 20:08:22.245737 [ 0.122878] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 29 20:08:22.257697 [ 0.123070] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 29 20:08:22.257732 [ 0.123111] NET: Registered PF_XDP protocol family Jun 29 20:08:22.269678 [ 0.123123] PCI: CLS 0 bytes, default 64 Jun 29 20:08:22.269710 [ 0.124229] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Jun 29 20:08:22.281709 [ 0.124597] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Jun 29 20:08:22.281746 [ 0.129533] Trying to unpack rootfs image as initramfs... Jun 29 20:08:22.293676 [ 0.184014] Initialise system trusted keyrings Jun 29 20:08:22.293709 [ 0.184119] Key type blacklist registered Jun 29 20:08:22.305703 [ 0.184372] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Jun 29 20:08:22.305738 [ 0.191534] zbud: loaded Jun 29 20:08:22.305761 [ 0.198202] integrity: Platform Keyring initialized Jun 29 20:08:22.317700 [ 0.198277] integrity: Machine keyring initialized Jun 29 20:08:22.317732 [ 0.198285] Key type asymmetric registered Jun 29 20:08:22.329697 [ 0.198291] Asymmetric key parser 'x509' registered Jun 29 20:08:22.329731 [ 1.507869] Freeing initrd memory: 25696K Jun 29 20:08:22.329756 [ 1.519654] alg: self-tests for CTR-KDF (hmac(sha256)) passed Jun 29 20:08:22.341698 [ 1.519953] bounce: pool size: 64 pages Jun 29 20:08:22.341730 [ 1.520125] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Jun 29 20:08:22.353698 [ 1.520289] io scheduler mq-deadline registered Jun 29 20:08:22.353731 [ 1.525449] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Jun 29 20:08:22.365704 [ 1.546233] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 29 20:08:22.365741 [ 1.546246] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 29 20:08:22.377696 [ 1.548529] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 29 20:08:22.389701 [ 1.548538] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 29 20:08:22.401697 [ 1.549393] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 29 20:08:22.401735 [ 1.549402] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 29 20:08:22.413702 [ 1.550189] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 29 20:08:22.425675 [ 1.550198] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 29 20:08:22.425715 [ 1.552567] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 29 20:08:22.437679 [ 1.555405] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 29 20:08:22.449697 [ 1.558159] Serial: AMBA driver Jun 29 20:08:22.449729 [ 1.558419] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 29 20:08:22.461678 [ 1.558900] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 29 20:08:22.461716 [ 1.559346] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 29 20:08:22.473656 [ 2.690240] printk: console [ttySAC2] enabled Jun 29 20:08:22.473688 [ 2.695053] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Jun 29 20:08:22.485686 [ 2.705762] STM32 USART driver initialized Jun 29 20:08:22.497659 [ 2.719827] mousedev: PS/2 mouse device common for all mice Jun 29 20:08:22.509659 [ 2.751041] s5m-rtc s5m-rtc: registered as rtc0 Jun 29 20:08:22.533709 [ 2.759667] s5m-rtc s5m-rtc: setting system clock to 2024-06-29T20:08:24 UTC (1719691704) Jun 29 20:08:22.545639 [ 2.769560] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Jun 29 20:08:22.557697 [ 2.776971] ledtrig-cpu: registered to indicate activity on CPUs Jun 29 20:08:22.569673 [ 2.784960] NET: Registered PF_INET6 protocol family Jun 29 20:08:22.569707 [ 2.798703] Segment Routing with IPv6 Jun 29 20:08:22.581661 [ 2.800941] In-situ OAM (IOAM) with IPv6 Jun 29 20:08:22.593698 [ 2.804903] mip6: Mobile IPv6 Jun 29 20:08:22.593729 [ 2.807782] NET: Registered PF_PACKET protocol family Jun 29 20:08:22.593756 [ 2.812937] mpls_gso: MPLS GSO support Jun 29 20:08:22.605695 [ 2.817174] ThumbEE CPU extension supported. Jun 29 20:08:22.605728 [ 2.820777] Registering SWP/SWPB emulation handler Jun 29 20:08:22.605754 [ 2.826054] registered taskstats version 1 Jun 29 20:08:22.617691 [ 2.829674] Loading compiled-in X.509 certificates Jun 29 20:08:22.617725 [ 3.286344] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Jun 29 20:08:23.073709 [ 3.293689] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Jun 29 20:08:23.085706 [ 3.304706] zswap: loaded using pool lzo/zbud Jun 29 20:08:23.097662 [ 3.308688] Key type .fscrypt registered Jun 29 20:08:23.097704 [ 3.312021] Key type fscrypt-provisioning registered Jun 29 20:08:23.097746 [ 3.325782] Key type encrypted registered Jun 29 20:08:23.109648 [ 3.328331] AppArmor: AppArmor sha1 policy hashing enabled Jun 29 20:08:23.121677 [ 3.333870] ima: No TPM chip found, activating TPM-bypass! Jun 29 20:08:23.121711 [ 3.339412] ima: Allocated hash algorithm: sha256 Jun 29 20:08:23.133703 [ 3.344019] ima: No architecture policies found Jun 29 20:08:23.133736 [ 3.348530] evm: Initialising EVM extended attributes: Jun 29 20:08:23.133762 [ 3.353610] evm: security.selinux Jun 29 20:08:23.145750 [ 3.356879] evm: security.SMACK64 (disabled) Jun 29 20:08:23.145783 [ 3.361155] evm: security.SMACK64EXEC (disabled) Jun 29 20:08:23.145809 [ 3.365748] evm: security.SMACK64TRANSMUTE (disabled) Jun 29 20:08:23.157691 [ 3.370781] evm: security.SMACK64MMAP (disabled) Jun 29 20:08:23.157724 [ 3.375381] evm: security.apparmor Jun 29 20:08:23.157748 [ 3.378766] evm: security.ima Jun 29 20:08:23.169732 [ 3.381717] evm: security.capability Jun 29 20:08:23.169764 [ 3.385282] evm: HMAC attrs: 0x1 Jun 29 20:08:23.169788 [ 3.969103] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 29 20:08:23.761616 [ 3.995457] Freeing unused kernel image (initmem) memory: 2048K Jun 29 20:08:23.785634 [ 4.000322] Checked W+X mappings: passed, no W+X pages found Jun 29 20:08:23.785634 [ 4.005583] Run /init as init process Jun 29 20:08:23.793616 [ 4.564939] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 29 20:08:24.349679 [ 4.629431] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 29 20:08:24.421660 [ 4.659182] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 29 20:08:24.445711 [ 4.672204] usbcore: registered new interface driver usbfs Jun 29 20:08:24.457685 [ 4.676853] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 29 20:08:24.469711 [ 4.685547] usbcore: registered new interface driver hub Jun 29 20:08:24.469744 [ 4.690729] usbcore: registered new device driver usb Jun 29 20:08:24.481665 [ 4.703468] phy phy-12130000.phy.1: phy_power_on was called before phy_init Jun 29 20:08:24.493726 [ 4.712604] phy phy-12130000.phy.1: phy_power_on was called before phy_init Jun 29 20:08:24.505678 [ 4.722695] exynos-ohci 12120000.usb: USB Host Controller Jun 29 20:08:24.505713 [ 4.727441] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Jun 29 20:08:24.517674 [ 4.735001] exynos-ehci 12110000.usb: EHCI Host Controller Jun 29 20:08:24.529601 [ 4.739978] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Jun 29 20:08:24.529601 [ 4.753282] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Jun 29 20:08:24.541743 [ 4.761537] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Jun 29 20:08:24.553726 [ 4.786430] s2mps11-clk s5m8767-clk: DMA mask not set Jun 29 20:08:24.577648 [ 4.813068] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Jun 29 20:08:24.601709 [ 4.819917] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 29 20:08:24.613702 [ 4.827103] usb usb1: Product: USB Host Controller Jun 29 20:08:24.613734 [ 4.831862] usb usb1: Manufacturer: Linux 6.1.0-18-armmp ohci_hcd Jun 29 20:08:24.625696 [ 4.837944] usb usb1: SerialNumber: 12120000.usb Jun 29 20:08:24.625729 [ 4.842558] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 29 20:08:24.637671 [ 4.856301] hub 1-0:1.0: USB hub found Jun 29 20:08:24.637703 [ 4.858666] hub 1-0:1.0: 3 ports detected Jun 29 20:08:24.649641 [ 4.874494] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 29 20:08:24.661693 [ 4.881364] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 29 20:08:24.673693 [ 4.888543] usb usb2: Product: EHCI Host Controller Jun 29 20:08:24.673725 [ 4.893370] usb usb2: Manufacturer: Linux 6.1.0-18-armmp ehci_hcd Jun 29 20:08:24.685672 [ 4.899447] usb usb2: SerialNumber: 12110000.usb Jun 29 20:08:24.685705 [ 4.914425] hub 2-0:1.0: USB hub found Jun 29 20:08:24.697653 [ 4.921520] hub 2-0:1.0: 3 ports detected Jun 29 20:08:24.709679 [ 4.927987] usb3503 usb-hub: switched to HUB mode Jun 29 20:08:24.709712 [ 4.931273] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 29 20:08:24.721663 [ 5.229986] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 29 20:08:25.021708 [ 5.234161] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 29 20:08:25.021745 [ 5.242155] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 Jun 29 20:08:25.033711 [ 5.251058] usb 2-3: new high-speed USB device number 2 using exynos-ehci Jun 29 20:08:25.045693 [ 5.253296] xhci-hcd xhci-hcd.2.auto: irq 108, io mem 0x12000000 Jun 29 20:08:25.045727 [ 5.264005] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 29 20:08:25.057701 [ 5.269376] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 29 20:08:25.057739 [ 5.276911] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 29 20:08:25.069692 [ 5.283576] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 29 20:08:25.081713 [ 5.291657] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 29 20:08:25.081751 [ 5.298864] usb usb3: Product: xHCI Host Controller Jun 29 20:08:25.093692 [ 5.303718] usb usb3: Manufacturer: Linux 6.1.0-18-armmp xhci-hcd Jun 29 20:08:25.093727 [ 5.309793] usb usb3: SerialNumber: xhci-hcd.2.auto Jun 29 20:08:25.093752 [ 5.315314] hub 3-0:1.0: USB hub found Jun 29 20:08:25.105708 [ 5.318427] hub 3-0:1.0: 1 port detected Jun 29 20:08:25.105740 [ 5.322775] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 29 20:08:25.117673 [ 5.330497] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Jun 29 20:08:25.117711 [ 5.338616] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 29 20:08:25.129691 [ 5.345835] usb usb4: Product: xHCI Host Controller Jun 29 20:08:25.129720 [ 5.350681] usb usb4: Manufacturer: Linux 6.1.0-18-armmp xhci-hcd Jun 29 20:08:25.141701 [ 5.356755] usb usb4: SerialNumber: xhci-hcd.2.auto Jun 29 20:08:25.141734 [ 5.362311] hub 4-0:1.0: USB hub found Jun 29 20:08:25.153642 [ 5.365381] hub 4-0:1.0: 1 port detected Jun 29 20:08:25.153674 [ 5.417599] usb 2-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Jun 29 20:08:25.213685 [ 5.424341] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jun 29 20:08:25.213721 [ 5.432142] hub 2-3:1.0: USB hub found Jun 29 20:08:25.213746 [ 5.435344] hub 2-3:1.0: 3 ports detected Jun 29 20:08:25.225626 Starting system log daemon: syslogd, klogd. Jun 29 20:08:25.357639 /var/run/utmp: No such file or directory Jun 29 20:08:27.193723 [?1h=(B   Jun 29 20:08:27.241681  Jun 29 20:08:27.241709 [  (-*) ][ Jun 29 20:08 ] Jun 29 20:08:27.265734 [  (0*start) ][ Jun 29 20:08 ] Jun 29 20:08:27.277687 [  (0*start) ][ Jun 29 20:08 ] Jun 29 20:08:27.289678 [  (0*start) ][ Jun 29 20:08 ] Jun 29 20:08:27.301847 [  (0*start) ][ Jun 29 20:08 ]                        [  (0*start) ][ Jun 29 20:08 ][  (0*start) ][ Jun 29 20:08 ] Jun 29 20:08:27.361773 [ 0- start  (2*shell) ][ Jun 29 20:08 ] Jun 29 20:08:27.373676 [ 0- start  (2*shell) ][ Jun 29 20:08 ] Jun 29 20:08:27.385669 [ 0- start  (2*shell) ][ Jun 29 20:08 ] Jun 29 20:08:27.397676 [ 0- start  (2*shell) ][ Jun 29 20:08 ]                        [ 0- start  (2*shell) ][ Jun 29 20:08 ][ 0- start  (2*shell) ][ Jun 29 20:08 ] Jun 29 20:08:27.457685 [ 0 start 2- shell  (3*shell) ][ Jun 29 20:08 ] Jun 29 20:08:27.469676 [ 0 start 2- shell  (3*shell) ][ Jun 29 20:08 ] Jun 29 20:08:27.481730 [ 0 start 2- shell  (3*shell) ][ Jun 29 20:08 ] Jun 29 20:08:27.493674 [ 0 start 2- shell  (3*shell) ][ Jun 29 20:08 ]                        [ 0 start 2- shell  (3*shell) ][ Jun 29 20:08 ][ 0 start 2- shell  (3*shell) ][ Jun 29 20:08 ] Jun 29 20:08:27.553675 [ 0 start 2 shell 3- shell  (4*log) ][ Jun 29 20:08 ] Jun 29 20:08:27.565675 [ 0 start 2 shell 3- shell  (4*log) ][ Jun 29 20:08 ] Jun 29 20:08:27.577676 [ 0 start 2 shell 3- shell  (4*log) ][ Jun 29 20:08 ] Jun 29 20:08:27.589776 [ 0 start 2 shell 3- shell  (4*log) ][ Jun 29 20:08 ]                        [ 0 start 2 shell 3- shell  (4*log) ][ Jun 29 20:08 ][ 0 start 2 shell 3- shell  (4*log) ][ Jun 29 20:08 ] Jun 29 20:08:27.649677 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 29 20:08 ] Jun 29 20:08:27.661676 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 29 20:08 ] Jun 29 20:08:27.673675 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 29 20:08 ] Jun 29 20:08:27.685681 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 29 20:08 ]                        [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 29 20:08 ][ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 29 20:08 ] Jun 29 20:08:27.745701 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Jun 29 20:08 ] Jun 29 20:08:27.757703 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Jun 29 20:08 ] Jun 29 20:08:27.769671 [  (1*installer) 2 shell 3 shell 4- log ][ Jun 29 20:08 ] Jun 29 20:08:28.225832 Detecting network hardware ... 2%... 95%... 100% Jun 29 20:08:29.977766 Detecting link on eth0; please wait... ... 0%... 10%... 20% Jun 29 20:08:34.873645 Waiting for link-local address... ... 8%... 16%... 25%... 33%... 100% Jun 29 20:08:35.905659 Attempting IPv6 autoconfiguration... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 75%... 83%... 91%... 100% Jun 29 20:08:41.985566 Configuring the network with DHCP ... 0%... 100% Jun 29 20:08:45.153638 Checking the Debian archive mirror ... 25%... 50%... 75%... 100% Jun 29 20:08:53.341634 Loading additional components ... 0%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 29 20:09 ]... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Jun 29 20:09:27.329707 Setting up the clock ... 0%... 100% Jun 29 20:09:30.137682 Loading additional components ... 50%... 100% Jun 29 20:09:31.817688 Detecting disks and all other hardware ... 2%... 95%... 100% Jun 29 20:09:35.789592 Loading additional components ... 5%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Jun 29 20:09:44.528518 Loading additional components ... 25%... 50%... 75%... 100% Jun 29 20:09:46.929672 Starting up the partitioner ... 4%... 13%... 21%... 30%... 43%... 52%... 60%... 73%... 82%... 91%... 100% Jun 29 20:09:58.197635 [  (1*installer) 2 shell 3 shell 4- log ][ Jun 29 20:10 ] Guided partitioning ... 16%... 33%... 50%... 66%... 83%... 100% Jun 29 20:10:06.925645 Starting up the partitioner ... 4%... 12%... 20%... 32%... 40%... 52%... 60%... 72%... 80%... 92%... 100% Jun 29 20:10:17.109710 Partitions formatting ... 33% Jun 29 20:10:25.585754 Partitions formatting Jun 29 20:10:34.953754 Partitions formatting Installing the base system ... 0%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 29 20:11 ]... 17%... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 29 20:12 ]... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 29 20:13 ]... 48%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 29 20:14 ]... 50%...  Jun 29 20:14:25.437754  60%... 70%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 29 20:15 ]... 79%... 83%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 29 20:16 ][  (1*installer) 2 shell 3 shell 4- log ][ Jun 29 20:17 ]... 91%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 29 20:18 ]... 100% Jun 29 20:18:52.117737 Configuring apt ... 7%... 14%... 14%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 29 20:19 ]... 21%... 35%... 42%... 50%... 60%... 71%. Jun 29 20:19:29.721725 ... 82%... 92%... 100% Jun 29 20:19:32.373723 Select and install software ... 1%... 10%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 29 20:20 ]... 13%... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 29 20:21 ]... 40%... 50%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 29 20:22 ]... Jun 29 20:22:20.357656 . 60%... 70%... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 29 20:23 ]... 88%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 29 20:24 ]... 90%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 29 20:25 ]... 94%... 100% Jun 29 20:25:43.948818 Finishing the installation ... 4%... 12%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 29 20:26 ][  (1*installer) 2 shell 3 shell 4- log ][ Jun 29 20:27 ]... 16%... 20%... 32%... 40%... 44%... Jun 29 20:27:31.212441  52%... 60%... 72%... 80%... 92% The system is going down NOW! Sent SIGKILL to all processes Jun 29 20:27:42.488506 Requesting system reboot Jun 29 20:27:42.488506 [ 1163.734722] reboot: Re˙ Jun 29 20:27:43.848536 Jun 29 20:27:43.848536 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 29 20:27:43.848536 Jun 29 20:27:43.848536 CPU: Exynos5250@1000MHz Jun 29 20:27:43.848536 Jun 29 20:27:43.848536 Board: Arndale Jun 29 20:27:43.848951 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 29 20:27:43.860644 ready Jun 29 20:27:43.860702 DRAM: 2 GiB Jun 29 20:27:43.860702 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 29 20:27:43.872505 trace: enabled Jun 29 20:27:43.908483 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 29 20:27:44.272500 i2c_init: failed to init bus 0 for speed = 100000 Jun 29 20:27:44.332535 In: serial Jun 29 20:27:44.332535 Out: serial Jun 29 20:27:44.332535 Err: serial Jun 29 20:27:44.332535 SCSI: ARNDALE SCSI INIT Jun 29 20:27:44.332535 Target spinup took 0 ms. Jun 29 20:27:44.344667 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 29 20:27:44.344718 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 29 20:27:44.356637 Net: Net Initialization Skipped Jun 29 20:27:44.356637 No ethernet found. Jun 29 20:27:44.356637 Hostname: arndale-metrocentre Jun 29 20:27:44.356637 Hit any key to stop autoboot: 2  1  0 Jun 29 20:27:46.284498 (Re)start USB... Jun 29 20:27:46.284498 USB0: USB EHCI 1.00 Jun 29 20:27:46.296508 scanning bus 0 for devices... 4 USB Device(s) found Jun 29 20:27:51.884673 scanning usb for storage devices... 0 Storage Device(s) found Jun 29 20:27:51.893750 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 29 20:27:52.337716 Waiting for Ethernet connection... done. Jun 29 20:27:53.933681 BOOTP broadcast 1 Jun 29 20:27:53.933736 BOOTP broadcast 2 Jun 29 20:27:55.925803 DHCP client bound to address 10.149.64.44 (2073 ms) Jun 29 20:27:55.925873 Using asx0 device Jun 29 20:27:55.937851 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 29 20:27:55.937914 Filename 'pxelinux.0'. Jun 29 20:27:55.937978 Load address: 0x43e00000 Jun 29 20:27:55.938023 Loading: *### Jun 29 20:27:55.961824 2.4 MiB/s Jun 29 20:27:55.961879 done Jun 29 20:27:55.961919 Bytes transferred = 42430 (a5be hex) Jun 29 20:27:55.961963 missing environment variable: pxeuuid Jun 29 20:27:55.962006 Retrieving file: pxelinux.cfg/0A95402C Jun 29 20:27:55.973856 Using asx0 device Jun 29 20:27:55.973910 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 29 20:27:55.973959 Filename 'pxelinux.cfg/0A95402C'. Jun 29 20:27:55.985830 Load address: 0x51000000 Jun 29 20:27:55.985885 Loading: *# Jun 29 20:27:55.985926 31.3 KiB/s Jun 29 20:27:55.985966 done Jun 29 20:27:55.986003 Bytes transferred = 65 (41 hex) Jun 29 20:27:55.986046 Config file found Jun 29 20:27:55.986085 Ignoring unknown command: serial Jun 29 20:27:55.997613 1: local Jun 29 20:27:55.997663 scanning bus for devices... Jun 29 20:27:55.997706 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 29 20:27:56.021653 Type: Hard Disk Jun 29 20:27:56.021710 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 29 20:27:56.021760 Found 1 device(s). Jun 29 20:27:56.021800 Jun 29 20:27:56.021836 SCSI device 0: Jun 29 20:27:56.033768 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 29 20:27:56.033768 Type: Hard Disk Jun 29 20:27:56.033768 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 29 20:27:56.045621 ... is now current device Jun 29 20:27:56.045677 Scanning scsi 0... Jun 29 20:27:56.045718 Found U-Boot script /boot.scr Jun 29 20:27:56.165707 641 bytes read in 37 ms (16.6 KiB/s) Jun 29 20:27:56.201768 ## Executing script at 50000000 Jun 29 20:27:56.201824 Loading dtbs/exynos5250-arndale.dtb Jun 29 20:27:56.213722 46686 bytes read in 515 ms (87.9 KiB/s) Jun 29 20:27:56.729780 Loading vmlinuz-6.1.0-22-armmp-lpae Jun 29 20:27:56.729842 5505536 bytes read in 189 ms (27.8 MiB/s) Jun 29 20:27:56.933789 Loading initrd.img-6.1.0-22-armmp-lpae Jun 29 20:27:56.951528 25720811 bytes read in 2520 ms (9.7 MiB/s) Jun 29 20:27:59.381761 Booting Jun 29 20:27:59.393746 Kernel image @ 0x42000000 [ 0x000000 - 0x540200 ] Jun 29 20:27:59.393807 ## Flattened Device Tree blob at 43000000 Jun 29 20:27:59.393853 Booting using the fdt blob at 0x43000000 Jun 29 20:27:59.405723 Loading Ramdisk to 4e778000, end 4ffff7eb ... OK Jun 29 20:27:59.813699 Loading Device Tree to 4e769000, end 4e77765d ... OK Jun 29 20:27:59.825672 Jun 29 20:27:59.825723 Starting kernel ...(fake run for tracing) Jun 29 20:27:59.825770 Jun 29 20:27:59.825808 Jun 29 20:27:59.837679 Starting kernel ... Jun 29 20:27:59.837736 Jun 29 20:27:59.837775 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 29 20:28:05.981749 [ 0.000000] Linux version 6.1.0-22-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.94-1 (2024-06-21) Jun 29 20:28:06.005780 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=30c5387d Jun 29 20:28:06.005846 [ 0.000000] CPU: div instructions available: patching division code Jun 29 20:28:06.017788 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 29 20:28:06.017854 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 29 20:28:06.029795 [ 0.000000] Memory policy: Data cache writealloc Jun 29 20:28:06.029856 [ 0.000000] efi: UEFI not found. Jun 29 20:28:06.041784 [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000 Jun 29 20:28:06.041845 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 29 20:28:06.041892 [ 0.000000] Zone ranges: Jun 29 20:28:06.053772 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Jun 29 20:28:06.053835 [ 0.000000] Normal empty Jun 29 20:28:06.053886 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Jun 29 20:28:06.065795 [ 0.000000] Movable zone start for each node Jun 29 20:28:06.065883 [ 0.000000] Early memory node ranges Jun 29 20:28:06.077781 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Jun 29 20:28:06.077843 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Jun 29 20:28:06.089772 [ 0.000000] percpu: Embedded 18 pages/cpu s44756 r8192 d20780 u73728 Jun 29 20:28:06.089835 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Jun 29 20:28:06.101732 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=ttySAC2,115200n8 Jun 29 20:28:06.113754 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Jun 29 20:28:06.113820 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 29 20:28:06.125765 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Jun 29 20:28:06.137754 [ 0.000000] Memory: 2015520K/2097152K available (12288K kernel code, 1714K rwdata, 3748K rodata, 2048K init, 382K bss, 65248K reserved, 16384K cma-reserved, 1294332K highmem) Jun 29 20:28:06.149749 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 29 20:28:06.149819 [ 0.000000] ftrace: allocating 39982 entries in 118 pages Jun 29 20:28:06.161765 [ 0.000000] ftrace: allocated 118 pages with 5 groups Jun 29 20:28:06.161825 [ 0.000000] trace event string verifier disabled Jun 29 20:28:06.173760 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 29 20:28:06.173846 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Jun 29 20:28:06.185754 [ 0.000000] Rude variant of Tasks RCU enabled. Jun 29 20:28:06.185806 [ 0.000000] Tracing variant of Tasks RCU enabled. Jun 29 20:28:06.185853 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Jun 29 20:28:06.197760 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 29 20:28:06.209745 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 29 20:28:06.209813 [ 0.000000] GIC: Using split EOI/Deactivate mode Jun 29 20:28:06.209855 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 29 20:28:06.221750 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 29 20:28:06.221817 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Jun 29 20:28:06.233757 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Jun 29 20:28:06.245764 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Jun 29 20:28:06.245832 [ 0.000019] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Jun 29 20:28:06.257755 [ 0.002642] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Jun 29 20:28:06.269744 [ 0.002656] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 29 20:28:06.269821 [ 0.002670] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 29 20:28:06.281757 [ 0.002682] Ignoring duplicate/late registration of read_current_timer delay Jun 29 20:28:06.293752 [ 0.003046] Console: colour dummy device 80x30 Jun 29 20:28:06.293815 [ 0.003086] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Jun 29 20:28:06.305760 [ 0.003100] CPU: Testing write buffer coherency: ok Jun 29 20:28:06.305820 [ 0.003144] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 29 20:28:06.317762 [ 0.003152] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 29 20:28:06.329750 [ 0.003159] pid_max: default: 32768 minimum: 301 Jun 29 20:28:06.329811 [ 0.003517] LSM: Security Framework initializing Jun 29 20:28:06.329858 [ 0.003587] landlock: Up and running. Jun 29 20:28:06.341737 [ 0.003592] Yama: disabled by default; enable with sysctl kernel.yama.* Jun 29 20:28:06.341821 [ 0.003775] AppArmor: AppArmor initialized Jun 29 20:28:06.353750 [ 0.003788] TOMOYO Linux initialized Jun 29 20:28:06.353808 [ 0.003832] LSM support for eBPF active Jun 29 20:28:06.353855 [ 0.004075] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 29 20:28:06.365763 [ 0.004088] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 29 20:28:06.365831 [ 0.005494] /cpus/cpu@0 missing clock-frequency property Jun 29 20:28:06.377899 [ 0.005522] /cpus/cpu@1 missing clock-frequency property Jun 29 20:28:06.377959 [ 0.005535] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 29 20:28:06.389868 [ 0.006482] cblist_init_generic: Setting adjustable number of callback queues. Jun 29 20:28:06.389935 [ 0.006489] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 29 20:28:06.401902 [ 0.006591] cblist_init_generic: Setting adjustable number of callback queues. Jun 29 20:28:06.401975 [ 0.006597] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 29 20:28:06.413759 [ 0.006737] Setting up static identity map for 0x40400000 - 0x404000ac Jun 29 20:28:06.425759 [ 0.007899] rcu: Hierarchical SRCU implementation. Jun 29 20:28:06.425817 [ 0.007904] rcu: Max phase no-delay instances is 1000. Jun 29 20:28:06.425866 [ 0.010041] EFI services will not be available. Jun 29 20:28:06.437754 [ 0.010387] smp: Bringing up secondary CPUs ... Jun 29 20:28:06.438118 [ 0.011127] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 29 20:28:06.449985 [ 0.011139] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 29 20:28:06.450056 [ 0.011283] smp: Brought up 1 node, 2 CPUs Jun 29 20:28:06.461761 [ 0.011292] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 29 20:28:06.461833 [ 0.011300] CPU: All CPU(s) started in HYP mode. Jun 29 20:28:06.473757 [ 0.011304] CPU: Virtualization extensions available. Jun 29 20:28:06.473844 [ 0.012172] devtmpfs: initialized Jun 29 20:28:06.473911 [ 0.022958] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 29 20:28:06.485767 [ 0.023189] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Jun 29 20:28:06.497925 [ 0.023215] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 29 20:28:06.497997 [ 0.023751] pinctrl core: initialized pinctrl subsystem Jun 29 20:28:06.509756 [ 0.024498] DMI not present or invalid. Jun 29 20:28:06.510035 [ 0.025170] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 29 20:28:06.521754 [ 0.026709] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 29 20:28:06.522129 [ 0.028186] audit: initializing netlink subsys (disabled) Jun 29 20:28:06.533731 [ 0.028390] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 Jun 29 20:28:06.534113 [ 0.029575] thermal_sys: Registered thermal governor 'fair_share' Jun 29 20:28:06.545762 [ 0.029582] thermal_sys: Registered thermal governor 'bang_bang' Jun 29 20:28:06.546115 [ 0.029587] thermal_sys: Registered thermal governor 'step_wise' Jun 29 20:28:06.557737 [ 0.029591] thermal_sys: Registered thermal governor 'user_space' Jun 29 20:28:06.558115 [ 0.029595] thermal_sys: Registered thermal governor 'power_allocator' Jun 29 20:28:06.569736 [ 0.029794] No ATAGs? Jun 29 20:28:06.570095 [ 0.029859] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jun 29 20:28:06.581748 [ 0.029868] hw-breakpoint: maximum watchpoint size is 8 bytes. Jun 29 20:28:06.582189 [ 0.030953] Serial: AMBA PL011 UART driver Jun 29 20:28:06.582239 [ 0.080489] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 29 20:28:06.594073 [ 0.087374] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Jun 29 20:28:06.605762 [ 0.091821] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages Jun 29 20:28:06.605845 [ 0.091830] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page Jun 29 20:28:06.617754 [ 0.098662] iommu: Default domain type: Translated Jun 29 20:28:06.617815 [ 0.098670] iommu: DMA domain TLB invalidation policy: strict mode Jun 29 20:28:06.629994 [ 0.099640] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Jun 29 20:28:06.630059 [ 0.100177] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 29 20:28:06.641778 [ 0.100189] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 29 20:28:06.642065 [ 0.100825] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 29 20:28:06.654117 [ 0.100855] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 29 20:28:06.665764 [ 0.101055] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 29 20:28:06.666084 [ 0.101415] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 29 20:28:06.677750 [ 0.101425] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 29 20:28:06.678079 [ 0.101803] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 29 20:28:06.678125 [ 0.102095] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 29 20:28:06.689749 [ 0.102105] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 29 20:28:06.690036 [ 0.102399] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 29 20:28:06.701769 [ 0.102516] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 29 20:28:06.702092 [ 0.102524] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 29 20:28:06.713736 [ 0.102703] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 29 20:28:06.714097 [ 0.102923] pps_core: LinuxPPS API ver. 1 registered Jun 29 20:28:06.725745 [ 0.102928] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 29 20:28:06.726046 [ 0.102944] PTP clock support registered Jun 29 20:28:06.737678 [ 0.104477] NetLabel: Initializing Jun 29 20:28:06.737713 [ 0.104483] NetLabel: domain hash size = 128 Jun 29 20:28:06.737739 [ 0.104488] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Jun 29 20:28:06.749732 [ 0.104543] NetLabel: unlabeled traffic allowed by default Jun 29 20:28:06.750074 [ 0.104713] vgaarb: loaded Jun 29 20:28:06.750117 [ 0.105180] clocksource: Switched to clocksource mct-frc Jun 29 20:28:06.761710 [ 0.105760] VFS: Disk quotas dquot_6.6.0 Jun 29 20:28:06.761754 [ 0.105845] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jun 29 20:28:06.773754 [ 0.106606] AppArmor: AppArmor Filesystem Enabled Jun 29 20:28:06.774109 [ 0.116471] NET: Registered PF_INET protocol family Jun 29 20:28:06.786078 [ 0.116663] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Jun 29 20:28:06.786148 [ 0.118130] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 29 20:28:06.797926 [ 0.118233] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 29 20:28:06.809966 [ 0.118259] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Jun 29 20:28:06.810048 [ 0.118360] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Jun 29 20:28:06.821802 [ 0.118591] TCP: Hash tables configured (established 8192 bind 8192) Jun 29 20:28:06.821836 [ 0.118838] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Jun 29 20:28:06.833973 [ 0.118938] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 29 20:28:06.834036 [ 0.118978] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 29 20:28:06.845861 [ 0.119198] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 29 20:28:06.857859 [ 0.119233] NET: Registered PF_XDP protocol family Jun 29 20:28:06.857893 [ 0.119243] PCI: CLS 0 bytes, default 64 Jun 29 20:28:06.857948 [ 0.119734] Trying to unpack rootfs image as initramfs... Jun 29 20:28:06.869916 [ 0.120098] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Jun 29 20:28:06.869995 [ 0.125482] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Jun 29 20:28:06.881924 [ 0.190318] Initialise system trusted keyrings Jun 29 20:28:06.881985 [ 0.190404] Key type blacklist registered Jun 29 20:28:06.893919 [ 0.191638] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Jun 29 20:28:06.893984 [ 0.199537] zbud: loaded Jun 29 20:28:06.894027 [ 0.201351] integrity: Platform Keyring initialized Jun 29 20:28:06.905907 [ 0.201392] integrity: Machine keyring initialized Jun 29 20:28:06.905968 [ 0.201402] Key type asymmetric registered Jun 29 20:28:06.917888 [ 0.201409] Asymmetric key parser 'x509' registered Jun 29 20:28:06.917948 [ 1.423472] Freeing initrd memory: 25120K Jun 29 20:28:06.917995 [ 1.445773] alg: self-tests for CTR-KDF (hmac(sha256)) passed Jun 29 20:28:06.929969 [ 1.446040] bounce: pool size: 64 pages Jun 29 20:28:06.930028 [ 1.446221] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Jun 29 20:28:06.941951 [ 1.446410] io scheduler mq-deadline registered Jun 29 20:28:06.942010 [ 1.451517] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Jun 29 20:28:06.953904 [ 1.472524] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 29 20:28:06.953941 [ 1.472536] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 29 20:28:06.965927 [ 1.474893] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 29 20:28:06.977938 [ 1.474903] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 29 20:28:06.989929 [ 1.475699] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 29 20:28:06.989998 [ 1.475707] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 29 20:28:07.001911 [ 1.476521] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 29 20:28:07.013932 [ 1.476530] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 29 20:28:07.014004 [ 1.478935] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 29 20:28:07.025934 [ 1.481759] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 29 20:28:07.037899 [ 1.484487] Serial: AMBA driver Jun 29 20:28:07.037931 [ 1.484713] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 29 20:28:07.049961 [ 1.485220] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 29 20:28:07.050032 [ 1.485711] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 29 20:28:07.061932 [ 2.566524] printk: console [ttySAC2] enabled Jun 29 20:28:07.073849 [ 2.571334] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Jun 29 20:28:07.073922 [ 2.582034] STM32 USART driver initialized Jun 29 20:28:07.085880 [ 2.596369] mousedev: PS/2 mouse device common for all mice Jun 29 20:28:07.097888 [ 2.627588] s5m-rtc s5m-rtc: registered as rtc0 Jun 29 20:28:07.133795 [ 2.636214] s5m-rtc s5m-rtc: setting system clock to 2024-06-29T20:28:08 UTC (1719692888) Jun 29 20:28:07.145831 [ 2.646074] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Jun 29 20:28:07.145895 [ 2.653591] ledtrig-cpu: registered to indicate activity on CPUs Jun 29 20:28:07.157803 [ 2.661581] NET: Registered PF_INET6 protocol family Jun 29 20:28:07.157864 [ 2.685576] Segment Routing with IPv6 Jun 29 20:28:07.181813 [ 2.687818] In-situ OAM (IOAM) with IPv6 Jun 29 20:28:07.193811 [ 2.691808] mip6: Mobile IPv6 Jun 29 20:28:07.193868 [ 2.694662] NET: Registered PF_PACKET protocol family Jun 29 20:28:07.193918 [ 2.699827] mpls_gso: MPLS GSO support Jun 29 20:28:07.205778 [ 2.703833] ThumbEE CPU extension supported. Jun 29 20:28:07.205811 [ 2.707699] Registering SWP/SWPB emulation handler Jun 29 20:28:07.205850 [ 2.712910] registered taskstats version 1 Jun 29 20:28:07.217786 [ 2.716573] Loading compiled-in X.509 certificates Jun 29 20:28:07.217847 [ 3.177225] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Jun 29 20:28:07.685733 [ 3.184536] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Jun 29 20:28:07.697817 [ 3.195609] zswap: loaded using pool lzo/zbud Jun 29 20:28:07.697877 [ 3.199589] Key type .fscrypt registered Jun 29 20:28:07.697922 [ 3.202871] Key type fscrypt-provisioning registered Jun 29 20:28:07.709749 [ 3.227099] Key type encrypted registered Jun 29 20:28:07.721773 [ 3.229700] AppArmor: AppArmor sha1 policy hashing enabled Jun 29 20:28:07.733775 [ 3.235188] ima: No TPM chip found, activating TPM-bypass! Jun 29 20:28:07.733837 [ 3.240631] ima: Allocated hash algorithm: sha256 Jun 29 20:28:07.745745 [ 3.245360] ima: No architecture policies found Jun 29 20:28:07.745804 [ 3.249856] evm: Initialising EVM extended attributes: Jun 29 20:28:07.757725 [ 3.254925] evm: security.selinux Jun 29 20:28:07.757783 [ 3.258213] evm: security.SMACK64 (disabled) Jun 29 20:28:07.757830 [ 3.262468] evm: security.SMACK64EXEC (disabled) Jun 29 20:28:07.769741 [ 3.267069] evm: security.SMACK64TRANSMUTE (disabled) Jun 29 20:28:07.769802 [ 3.272101] evm: security.SMACK64MMAP (disabled) Jun 29 20:28:07.769849 [ 3.276701] evm: security.apparmor Jun 29 20:28:07.781731 [ 3.280086] evm: security.ima Jun 29 20:28:07.781762 [ 3.283038] evm: security.capability Jun 29 20:28:07.781816 [ 3.286603] evm: HMAC attrs: 0x1 Jun 29 20:28:07.781859 [ 3.876173] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 29 20:28:08.381796 [ 3.882144] clk: Disabling unused clocks Jun 29 20:28:08.381857 [ 3.895067] Freeing unused kernel image (initmem) memory: 2048K Jun 29 20:28:08.393804 [ 3.899934] Checked W+X mappings: passed, no W+X pages found Jun 29 20:28:08.405796 [ 3.905197] Run /init as init process Jun 29 20:28:08.405854 Loading, please wait... Jun 29 20:28:08.441745 Starting systemd-udevd version 252.26-1~deb12u2 Jun 29 20:28:08.513764 [ 4.833081] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 29 20:28:09.341714 [ 4.846150] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 29 20:28:09.353725 [ 4.857976] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 29 20:28:09.365784 [ 4.865322] usbcore: registered new interface driver usbfs Jun 29 20:28:09.365845 [ 4.873628] usbcore: registered new interface driver hub Jun 29 20:28:09.377727 [ 4.877557] usbcore: registered new device driver usb Jun 29 20:28:09.377788 [ 4.898728] phy phy-12130000.phy.4: phy_power_on was called before phy_init Jun 29 20:28:09.401813 [ 4.906893] exynos-ehci 12110000.usb: EHCI Host Controller Jun 29 20:28:09.413797 [ 4.911001] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Jun 29 20:28:09.413866 [ 4.927657] Synopsys Designware Multimedia Card Interface Driver Jun 29 20:28:09.425744 [ 4.953380] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 29 20:28:09.461743 [ 4.960923] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 29 20:28:09.461779 [ 4.965947] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 29 20:28:09.473713 [ 4.975427] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Jun 29 20:28:09.473776 [ 4.985285] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo Jun 29 20:28:09.485754 [ 4.994347] mmc_host mmc0: card is polling. Jun 29 20:28:09.497684 [ 5.009243] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 29 20:28:09.509735 [ 5.016244] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 29 20:28:09.521768 [ 5.023124] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 29 20:28:09.521836 [ 5.030269] usb usb1: Product: EHCI Host Controller Jun 29 20:28:09.533741 [ 5.033868] s2mps11-clk s5m8767-clk: DMA mask not set Jun 29 20:28:09.533801 [ 5.035127] usb usb1: Manufacturer: Linux 6.1.0-22-armmp-lpae ehci_hcd Jun 29 20:28:09.545763 [ 5.040217] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 29 20:28:09.557707 [ 5.046664] usb usb1: SerialNumber: 12110000.usb Jun 29 20:28:09.557767 [ 5.077411] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 29 20:28:09.581714 [ 5.119566] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 29 20:28:09.617740 [ 5.124600] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 29 20:28:09.629723 [ 5.134037] hub 1-0:1.0: USB hub found Jun 29 20:28:09.629781 [ 5.140751] hub 1-0:1.0: 3 ports detected Jun 29 20:28:09.641755 [ 5.159741] phy phy-12130000.phy.4: phy_power_on was called before phy_init Jun 29 20:28:09.665805 [ 5.167324] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 29 20:28:09.677778 [ 5.186700] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 109,32 bit host data width,128 deep fifo Jun 29 20:28:09.689828 [ 5.196225] mmc0: new DDR MMC card at address 0001 Jun 29 20:28:09.701670 [ 5.210365] exynos-ohci 12120000.usb: USB Host Controller Jun 29 20:28:09.713840 [ 5.227630] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Jun 29 20:28:09.725737 [ 5.234675] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Jun 29 20:28:09.737682 [ 5.249036] mmcblk0: p1 p2 p3 p4 Jun 29 20:28:09.749873 [ 5.253258] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 29 20:28:09.761732 [ 5.262119] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Jun 29 20:28:09.761793 [ 5.273669] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Jun 29 20:28:09.773688 [ 5.312236] SCSI subsystem initialized Jun 29 20:28:09.809833 [ 5.334087] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Jun 29 20:28:09.833706 [ 5.350025] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Jun 29 20:28:09.857768 [ 5.356888] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 29 20:28:09.857838 [ 5.364097] usb usb2: Product: USB Host Controller Jun 29 20:28:09.869757 [ 5.368847] usb usb2: Manufacturer: Linux 6.1.0-22-armmp-lpae ohci_hcd Jun 29 20:28:09.869822 [ 5.375345] usb usb2: SerialNumber: 12120000.usb Jun 29 20:28:09.881689 [ 5.388993] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (241:0) Jun 29 20:28:09.893750 [ 5.394597] hub 2-0:1.0: USB hub found Jun 29 20:28:09.893809 [ 5.397578] hub 2-0:1.0: 3 ports detected Jun 29 20:28:09.893854 [ 5.410308] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 29 20:28:09.917756 [ 5.416452] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 29 20:28:09.917828 [ 5.429930] mmc1: new high speed SDHC card at address aaaa Jun 29 20:28:09.929751 [ 5.434298] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 29 20:28:09.941660 [ 5.455155] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Jun 29 20:28:09.953854 [ 5.458903] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 29 20:28:09.965681 [ 5.487477] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 29 20:28:09.989761 [ 5.493167] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Jun 29 20:28:10.001763 [ 5.501965] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 29 20:28:10.013764 [ 5.514383] scsi host0: ahci-dwc Jun 29 20:28:10.013820 [ 5.527898] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 111 Jun 29 20:28:10.037552 [ 5.847277] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 29 20:28:10.349821 [ 5.920555] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 29 20:28:10.421806 [ 6.017248] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 29 20:28:10.517804 [ 6.022817] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 29 20:28:10.529789 [ 6.028664] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 29 20:28:10.529852 [ 6.036121] ata1.00: configured for UDMA/133 Jun 29 20:28:10.541735 [ 6.039871] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 29 20:28:10.541804 [ 6.050919] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 29 20:28:10.553787 [ 6.054305] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 29 20:28:10.565784 [ 6.059463] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 29 20:28:10.565851 [ 6.082126] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Jun 29 20:28:10.589791 [ 6.090169] xhci-hcd xhci-hcd.2.auto: irq 110, io mem 0x12000000 Jun 29 20:28:10.589852 [ 6.096704] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 29 20:28:10.601783 [ 6.101581] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 29 20:28:10.601850 [ 6.109284] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 29 20:28:10.613792 [ 6.116654] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 29 20:28:10.625882 [ 6.123931] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 29 20:28:10.625969 [ 6.131124] usb usb3: Product: xHCI Host Controller Jun 29 20:28:10.637834 [ 6.135984] usb usb3: Manufacturer: Linux 6.1.0-22-armmp-lpae xhci-hcd Jun 29 20:28:10.637874 [ 6.142502] usb usb3: SerialNumber: xhci-hcd.2.auto Jun 29 20:28:10.649724 [ 6.147948] hub 3-0:1.0: USB hub found Jun 29 20:28:10.649782 [ 6.151139] hub 3-0:1.0: 1 port detected Jun 29 20:28:10.649826 [ 6.155490] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 29 20:28:10.661819 [ 6.163206] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Jun 29 20:28:10.673773 [ 6.164465] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 29 20:28:10.673845 [ 6.171321] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 29 20:28:10.685799 [ 6.187891] usb usb4: Product: xHCI Host Controller Jun 29 20:28:10.685858 [ 6.192752] usb usb4: Manufacturer: Linux 6.1.0-22-armmp-lpae xhci-hcd Jun 29 20:28:10.697819 [ 6.199261] usb usb4: SerialNumber: xhci-hcd.2.auto Jun 29 20:28:10.697867 [ 6.204761] hub 4-0:1.0: USB hub found Jun 29 20:28:10.709802 [ 6.207895] hub 4-0:1.0: 1 port detected Jun 29 20:28:10.709868 [ 6.268400] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 29 20:28:10.769755 [ 6.274464] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 29 20:28:10.781733 [ 6.279744] sd 0:0:0:0: [sda] Write Protect is off Jun 29 20:28:10.781793 [ 6.288011] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 29 20:28:10.793760 [ 6.288086] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 29 20:28:10.805765 [ 6.305818] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 29 20:28:10.805831 [ 6.333526] sda: sda1 sda2 < sda5 > Jun 29 20:28:10.829647 [ 6.336320] sd 0:0:0:0: [sda] Attached SCSI disk Jun 29 20:28:10.841680 [ 6.396060] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 29 20:28:10.901723 [ 6.725210] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 29 20:28:11.225758 [ 6.794599] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 29 20:28:11.297768 [ 6.908708] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 29 20:28:11.417697 [ 7.016313] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 29 20:28:11.525679 [ 7.123906] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 29 20:28:11.633676 [ 7.231508] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 29 20:28:11.741728 [ 7.239018] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 29 20:28:11.741796 [ 7.281203] random: crng init done Jun 29 20:28:11.777697 [ 7.390377] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. Jun 29 20:28:11.897765 [ 7.401232] device-mapper: uevent: version 1.0.3 Jun 29 20:28:11.897824 [ 7.407157] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Jun 29 20:28:11.909735 Begin: Loading essential drivers ... done. Jun 29 20:28:12.521686 Begin: Running /scripts/init-premount ... done. Jun 29 20:28:15.525785 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 29 20:28:15.537733 Begin: Running /scripts/local-premount ... done. Jun 29 20:28:15.585697 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 29 20:28:15.645806 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 29 20:28:15.765670 /dev/mapper/arndale--metrocentre--vg-root: clean, 39331/1220608 files, 378007/4882432 blocks Jun 29 20:28:16.017733 done. Jun 29 20:28:16.041672 [ 11.650830] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 29 20:28:16.149926 [ 11.908254] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. Jun 29 20:28:16.413594 done. Jun 29 20:28:16.413594 Begin: Running /scripts/local-bottom ... done. Jun 29 20:28:16.461643 Begin: Running /scripts/init-bottom ... done. Jun 29 20:28:16.497597 [ 12.218585] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. Jun 29 20:28:16.725618 INIT: version 3.06 booting Jun 29 20:28:17.013601 INIT: No inittab.d directory found Jun 29 20:28:17.133596 Using makefile-style concurrent boot in runlevel S. Jun 29 20:28:17.445643 Starting hotplug events dispatcher: systemd-udevd. Jun 29 20:28:19.089738 Synthesizing the initial hotplug events (subsystems)...done. Jun 29 20:28:19.329726 Synthesizing the initial hotplug events (devices)...done. Jun 29 20:28:19.917726 Waiting for /dev to be fully populated...[ 15.677432] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 29 20:28:20.181691 [ 15.693434] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 29 20:28:20.193762 [ 15.804886] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jun 29 20:28:20.301709 [ 15.915552] panfrost 11800000.gpu: clock rate = 533000000 Jun 29 20:28:20.421594 [ 15.999158] panfrost 11800000.gpu: mali-t600 id 0x600 major 0x0 minor 0x0 status 0x1 Jun 29 20:28:20.505774 [ 16.005474] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,31b4dfff Jun 29 20:28:20.505842 [ 16.013610] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 Jun 29 20:28:20.517768 [ 16.025322] panfrost 11800000.gpu: shader_present=0xf l2_present=0x1 Jun 29 20:28:20.529750 [ 16.037497] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 0 Jun 29 20:28:20.551246 [ 16.056051] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 29 20:28:20.565695 [ 16.081207] usb3503 usb-hub: switched to HUB mode Jun 29 20:28:20.577734 [ 16.084449] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 29 20:28:20.589737 [ 16.134747] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 29 20:28:20.637748 [ 16.268503] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 29 20:28:20.769763 [ 16.377249] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 29 20:28:20.877758 [ 16.405303] usb 1-3: new high-speed USB device number 2 using exynos-ehci Jun 29 20:28:20.913686 [ 16.485339] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 29 20:28:20.985761 [ 16.565634] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Jun 29 20:28:21.069761 [ 16.572419] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jun 29 20:28:21.081710 [ 16.583815] hub 1-3:1.0: USB hub found Jun 29 20:28:21.081768 [ 16.593409] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 29 20:28:21.093759 [ 16.602154] hub 1-3:1.0: 3 ports detected Jun 29 20:28:21.105705 [ 16.642734] OF: graph: no port node found in /soc/hdmi@14530000 Jun 29 20:28:21.141733 [ 16.756595] I/O error, dev mmcblk1, sector 7743713 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 2 Jun 29 20:28:21.261739 [ 16.893399] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Jun 29 20:28:21.393615 [ 17.024801] usb 1-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=77.32 Jun 29 20:28:21.525675 [ 17.031836] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Jun 29 20:28:21.537681 [ 17.039045] usb 1-3.2: Product: USB2.0 Hub Jun 29 20:28:21.537713 [ 17.044594] hub 1-3.2:1.0: USB hub found Jun 29 20:28:21.549708 [ 17.047663] hub 1-3.2:1.0: 4 ports detected Jun 29 20:28:21.549767 [ 17.065313] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 29 20:28:21.573698 [ 17.135144] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 29 20:28:21.645685 [ 17.251322] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 29 20:28:21.753708 [ 17.345385] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 29 20:28:21.849794 [ 17.359050] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 29 20:28:21.861735 [ 17.466926] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 29 20:28:21.969776 [ 17.476255] usb 1-3.2.4: New USB device found, idVendor=0b95, idProduct=772a, bcdDevice= 0.01 Jun 29 20:28:21.981761 [ 17.483598] usb 1-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 29 20:28:21.993756 [ 17.491013] usb 1-3.2.4: Product: AX88772 Jun 29 20:28:21.993816 [ 17.495091] usb 1-3.2.4: Manufacturer: ASIX Elec. Corp. Jun 29 20:28:21.993864 [ 17.500228] usb 1-3.2.4: SerialNumber: 000001 Jun 29 20:28:22.005691 [ 17.575182] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 29 20:28:22.077774 [ 17.582877] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 29 20:28:22.089713 [ 18.139280] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 29 20:28:22.641736 [ 18.839968] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 29 20:28:23.349730 [ 18.855510] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Jun 29 20:28:23.361765 [ 18.867359] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, b6:a1:8e:89:c6:a2 Jun 29 20:28:23.373725 [ 18.885731] usbcore: registered new interface driver asix Jun 29 20:28:23.385715 done. Jun 29 20:28:23.673748 [ 19.667057] EXT4-fs (dm-0): re-mounted. Quota mode: none. Jun 29 20:28:24.165752 Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). Jun 29 20:28:24.201737 Checking file systems.../dev/sda1: clean, 922/61056 files, 25375/243968 blocks Jun 29 20:28:25.941651 done. Jun 29 20:28:25.977579 Cleaning up temporary files... /tmp. Jun 29 20:28:26.337717 [ 22.046028] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 29 20:28:26.553604 [ 22.098234] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Jun 29 20:28:26.601617 [ 22.365978] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k FS Jun 29 20:28:26.877681 Mounting local filesystems...done. Jun 29 20:28:27.261703 Activating swapfile swap, if any...done. Jun 29 20:28:27.261764 Cleaning up temporary files.... Jun 29 20:28:27.321700 Starting Setting kernel variables: sysctl. Jun 29 20:28:27.597791 [ 23.638790] audit: type=1400 audit(1719692909.196:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=877 comm="apparmor_parser" Jun 29 20:28:28.149711 [ 23.663168] audit: type=1400 audit(1719692909.216:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=878 comm="apparmor_parser" Jun 29 20:28:28.173729 [ 23.679074] audit: type=1400 audit(1719692909.236:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=878 comm="apparmor_parser" Jun 29 20:28:28.185805 [ 23.997501] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Jun 29 20:28:28.497734 [ 24.050056] audit: type=1400 audit(1719692909.608:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=921 comm="apparmor_parser" Jun 29 20:28:28.557757 [ 24.069802] audit: type=1400 audit(1719692909.624:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=921 comm="apparmor_parser" Jun 29 20:28:28.581773 [ 24.083240] audit: type=1400 audit(1719692909.624:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=921 comm="apparmor_parser" Jun 29 20:28:28.593735 [ 24.362534] audit: type=1400 audit(1719692909.920:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=914 comm="apparmor_parser" Jun 29 20:28:28.869785 [ 24.381312] audit: type=1400 audit(1719692909.920:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=914 comm="apparmor_parser" Jun 29 20:28:28.893768 [ 24.397188] audit: type=1400 audit(1719692909.920:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=914 comm="apparmor_parser" Jun 29 20:28:28.905781 [ 24.414703] audit: type=1400 audit(1719692909.920:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=914 comm="apparmor_parser" Jun 29 20:28:28.929741 Starting: AppArmorLoading AppArmor profiles...done. Jun 29 20:28:28.953702 . Jun 29 20:28:28.953753 [ 26.182890] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 29 20:28:30.681810 [ 26.188936] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jun 29 20:28:30.693660 Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1 Jun 29 20:28:32.061838 Copyright 2004-2022 Internet Systems Consortium. Jun 29 20:28:32.061914 All rights reserved. Jun 29 20:28:32.061957 For info, please visit https://www.isc.org/software/dhcp/ Jun 29 20:28:32.073754 Jun 29 20:28:32.073806 Listening on LPF/eth0/9e:04:00:59:64:5a Jun 29 20:28:32.073852 Sending on LPF/eth0/9e:04:00:59:64:5a Jun 29 20:28:32.073897 Sending on Socket/fallback Jun 29 20:28:32.073940 Created duid "\000\001\000\001.\023*\355\236\004\000YdZ". Jun 29 20:28:32.085738 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 Jun 29 20:28:32.085844 [ 28.897322] exynos-mixer 14450000.mixer: deferred probe timeout, ignoring dependency Jun 29 20:28:33.405800 [ 28.907914] exynos4-fb 14400000.fimd: deferred probe timeout, ignoring dependency Jun 29 20:28:33.405884 [ 28.916171] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations Jun 29 20:28:33.417757 [ 28.922605] exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm]) Jun 29 20:28:33.429770 [ 28.931322] exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm]) Jun 29 20:28:33.429838 [ 28.940695] exynos-drm exynos-drm: bound 14500000.dsi (ops hdmi_enable [exynosdrm]) Jun 29 20:28:33.441766 [ 28.947284] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm]) Jun 29 20:28:33.453785 [ 28.968636] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Jun 29 20:28:33.465726 [ 28.974526] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Jun 29 20:28:33.477753 [ 28.983274] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 Jun 29 20:28:33.489652 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 Jun 29 20:28:34.113823 DHCPOFFER of 10.149.64.44 from 10.149.64.4 Jun 29 20:28:34.113901 DHCPREQUEST for 10.149.64.44 on eth0 to 255.255.255.255 port 67 Jun 29 20:28:34.125758 DHCPACK of 10.149.64.44 from 10.149.64.4 Jun 29 20:28:34.125819 bound to 10.149.64.44 -- renewal in 255 seconds. Jun 29 20:28:34.137680 done. Jun 29 20:28:34.137731 Cleaning up temporary files.... Jun 29 20:28:34.185700 Starting nftables: none Jun 29 20:28:34.245676 . Jun 29 20:28:34.653607 INIT: Entering runlevel: 2 Jun 29 20:28:34.713567 Using makefile-style concurrent boot in runlevel 2. Jun 29 20:28:34.761583 Starting Apache httpd web server: apache2. Jun 29 20:28:36.805716 Starting NTP server: ntpd2024-06-29T20:28:38 ntpd[1130]: INIT: ntpd ntpsec-1.2.2: Starting Jun 29 20:28:37.241691 2024-06-29T20:28:38 ntpd[1130]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 29 20:28:37.276069 . Jun 29 20:28:37.276138 Starting periodic command scheduler: cron. Jun 29 20:28:37.289714 Starting system message bus: dbus. Jun 29 20:28:37.553712 Starting OpenBSD Secure Shell server: sshd. Jun 29 20:28:38.357686 Jun 29 20:28:39.413743 Debian GNU/Linux 12 arndale-metrocentre ttySAC2 Jun 29 20:28:39.413808 Jun 29 20:28:39.413846 arndale-metrocentre login: INIT: Switching to r INIT: No initUsing makefile-style concurrent boot in runlevel 6. Jun 29 20:33:48.625668 Stopping nftables: none. Jun 29 20:33:48.697671 Stopping SMP IRQ Balancer: irqbalance. Jun 29 20:33:48.697710 Stopping hotplug events dispatcher: systemd-udevd. Jun 29 20:33:48.721650 Saving the system clock to /dev/rtc0. Jun 29 20:33:49.021650 Hardware Clock updated to Sat Jun 29 20:33:50 UTC 2024. Jun 29 20:33:49.033631 Stopping Apache httpd web server: apache2. Jun 29 20:33:49.861628 Asking all remaining processes to terminate...done. Jun 29 20:33:50.113642 All processes ended within 1 seconds...done. Jun 29 20:33:50.113675 Deconfiguring network interfaces...ifdown: ignoring unknown interface eth0=eth0 Jun 29 20:33:50.257669 done. Jun 29 20:33:50.257701 [ 345.965836] EXT4-fs (sda1): unmounting filesystem. Jun 29 20:33:50.461680 Deactivating swap...done. Jun 29 20:33:50.521641 Unmounting local filesystems...done. Jun 29 20:33:50.533641 [ 346.283453] EXT4-fs (dm-0): re-mounted. Quota mode: none. Jun 29 20:33:50.785631 Will now restart. Jun 29 20:33:51.085640 [ 346.617994] asix 1-3.2.4:1.0 eth0: Link is Down Jun 29 20:33:51.109645 [ 346.665964] sd 0:0:0:0: [sda] Synchronizing SCSI cache Jun 29 20:33:51.157662 [ 346.693944] wake enabled for irq 101 (gpx1-4) Jun 29 20:33:51.193692 [ 346.696834] wake enabled for irq 102 (gpx1-5) Jun 29 20:33:51.193724 [ 346.701194] wake enabled for irq 103 (gpx1-6) Jun 29 20:33:51.193750 [ 346.705530] wake enabled for irq 104 (gpx1-7) Jun 29 20:33:51.205689 [ 346.709870] wake enabled for irq 105 (gpx2-0) Jun 29 20:33:51.205722 [ 346.714209] wake enabled for irq 106 (gpx2-1) Jun 29 20:33:51.217649 [ 346.719024] reboot: Re˙ Jun 29 20:33:51.553672 Jun 29 20:33:51.553699 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 29 20:33:51.553727 Jun 29 20:33:51.553747 CPU: Exynos5250@1000MHz Jun 29 20:33:51.553770 Jun 29 20:33:51.553790 Board: Arndale Jun 29 20:33:51.565660 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 29 20:33:51.565693 ready Jun 29 20:33:51.565714 DRAM: 2 GiB Jun 29 20:33:51.565735 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 29 20:33:51.589627 trace: enabled Jun 29 20:33:51.625619 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 29 20:33:51.985635 i2c_init: failed to init bus 0 for speed = 100000 Jun 29 20:33:52.045658 In: serial Jun 29 20:33:52.045687 Out: serial Jun 29 20:33:52.045710 Err: serial Jun 29 20:33:52.045731 SCSI: ARNDALE SCSI INIT Jun 29 20:33:52.045754 Target spinup took 0 ms. Jun 29 20:33:52.057692 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 29 20:33:52.057725 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 29 20:33:52.057751 Net: Net Initialization Skipped Jun 29 20:33:52.069665 No ethernet found. Jun 29 20:33:52.069695 Hostname: arndale-metrocentre Jun 29 20:33:52.069718 Hit any key to stop autoboot: 2  1  0 Jun 29 20:33:53.997664 (Re)start USB... Jun 29 20:33:53.997707 USB0: USB EHCI 1.00 Jun 29 20:33:53.997730 scanning bus 0 for devices... 4 USB Device(s) found Jun 29 20:33:59.601630 scanning usb for storage devices... 0 Storage Device(s) found Jun 29 20:33:59.601630 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 29 20:34:00.045595 Waiting for Ethernet connection... done. Jun 29 20:34:01.641652 BOOTP broadcast 1 Jun 29 20:34:01.653628 EHCI timed out on TD - token=0x8008d80 Jun 29 20:34:06.441769 BOOTP broadcast 2 Jun 29 20:34:06.453762 DHCP client bound to address 10.149.64.44 (5006 ms) Jun 29 20:34:06.453824 Using asx0 device Jun 29 20:34:06.453866 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 29 20:34:06.465743 Filename 'pxelinux.0'. Jun 29 20:34:06.465800 Load address: 0x43e00000 Jun 29 20:34:06.465843 Loading: *### Jun 29 20:34:06.477671 2.4 MiB/s Jun 29 20:34:06.477726 done Jun 29 20:34:06.477766 Bytes transferred = 42430 (a5be hex) Jun 29 20:34:06.489758 missing environment variable: pxeuuid Jun 29 20:34:06.489816 Retrieving file: pxelinux.cfg/0A95402C Jun 29 20:34:06.489862 Using asx0 device Jun 29 20:34:06.489903 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 29 20:34:06.501774 Filename 'pxelinux.cfg/0A95402C'. Jun 29 20:34:06.501832 Load address: 0x51000000 Jun 29 20:34:06.501876 Loading: *# Jun 29 20:34:06.501916 31.3 KiB/s Jun 29 20:34:06.501956 done Jun 29 20:34:06.513755 Bytes transferred = 65 (41 hex) Jun 29 20:34:06.513813 Config file found Jun 29 20:34:06.513856 Ignoring unknown command: serial Jun 29 20:34:06.513900 1: local Jun 29 20:34:06.513939 scanning bus for devices... Jun 29 20:34:06.513982 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 29 20:34:06.549768 Type: Hard Disk Jun 29 20:34:06.549825 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 29 20:34:06.561762 Found 1 device(s). Jun 29 20:34:06.561817 Jun 29 20:34:06.561856 SCSI device 0: Jun 29 20:34:06.561897 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 29 20:34:06.573763 Type: Hard Disk Jun 29 20:34:06.573820 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 29 20:34:06.573870 ... is now current device Jun 29 20:34:06.573912 Scanning scsi 0... Jun 29 20:34:06.585700 Found U-Boot script /boot.scr Jun 29 20:34:06.753713 1779 bytes read in 37 ms (46.9 KiB/s) Jun 29 20:34:06.801745 ## Executing script at 50000000 Jun 29 20:34:06.801803 Loading dtbs/6.10.0-rc5+/exynos5250-arndale.dtb Jun 29 20:34:06.813660 46641 bytes read in 1889 ms (23.4 KiB/s) Jun 29 20:34:08.637740 983052 bytes read in 120 ms (7.8 MiB/s) Jun 29 20:34:08.769770 Loaded xen-4.19-unstable to 0x41000000 (f000c) Jun 29 20:34:08.781763 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan sched=rtds Jun 29 20:34:08.793708 10785280 bytes read in 596 ms (17.3 MiB/s) Jun 29 20:34:09.381726 Loaded vmlinuz-6.10.0-rc5+ to 0x42000000 (a49200) Jun 29 20:34:09.393722 command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 29 20:34:09.405799 12142166 bytes read in 788 ms (14.7 MiB/s) Jun 29 20:34:10.197774 Loaded initrd.img-6.10.0-rc5+ to 0x43300000 (b94656) Jun 29 20:34:10.197846 chosen { Jun 29 20:34:10.197885 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan sched=rtds"; Jun 29 20:34:10.209830 #size-cells = <0x00000001>; Jun 29 20:34:10.221761 #address-cells = <0x00000001>; Jun 29 20:34:10.221818 stdout-path = "serial2:115200n8"; Jun 29 20:34:10.221862 module@1 { Jun 29 20:34:10.221901 reg = <0x43300000 0x00b94656>; Jun 29 20:34:10.221942 compatible = "xen,linux-initrd", "xen,multiboot-module"; Jun 29 20:34:10.233739 }; Jun 29 20:34:10.233791 module@0 { Jun 29 20:34:10.233831 bootargs = "ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Jun 29 20:34:10.245819 reg = <0x42000000 0x00a49200>; Jun 29 20:34:10.257758 compatible = "xen,linux-zimage", "xen,multiboot-module"; Jun 29 20:34:10.257820 }; Jun 29 20:34:10.257859 }; Jun 29 20:34:10.257895 Booting 0x41000000 - 0x43000000 Jun 29 20:34:10.257937 Kernel image @ 0x41000000 [ 0x000000 - 0x12f000 ] Jun 29 20:34:10.269746 ## Flattened Device Tree blob at 43000000 Jun 29 20:34:10.269804 Booting using the fdt blob at 0x43000000 Jun 29 20:34:10.269848 reserving fdt memory region: addr=43000000 size=c000 Jun 29 20:34:10.281756 Loading Device Tree to 4fff1000, end 4fffffff ... OK Jun 29 20:34:10.281815 Jun 29 20:34:10.293730 Starting kernel ...(fake run for tracing) Jun 29 20:34:10.293790 Jun 29 20:34:10.293828 Jun 29 20:34:10.293864 Starting kernel ... Jun 29 20:34:10.293903 Jun 29 20:34:10.293940 __ __ _ _ _ ___ _ _ _ Jun 29 20:34:10.341733 \ \/ /___ _ __ | || | / |/ _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Jun 29 20:34:10.353769 \ // _ \ '_ \ | || |_ | | (_) |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Jun 29 20:34:10.365767 / \ __/ | | | |__ _|| |\__, |__| |_| | | | \__ \ || (_| | |_) | | __/ Jun 29 20:34:10.365829 /_/\_\___|_| |_| |_|(_)_| /_/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Jun 29 20:34:10.377761 Jun 29 20:34:10.377811 (XEN) Xen version 4.19-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Sat Jun 29 18:19:56 UTC 2024 Jun 29 20:34:10.389765 (XEN) Latest ChangeSet: Wed Jun 26 16:07:30 2024 +0100 git:08f9b1dd9c Jun 29 20:34:10.389829 (XEN) build-id: b9392d5be22d35c0073ac9215c669f6e9fcfb743 Jun 29 20:34:10.401772 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Jun 29 20:34:10.401836 (XEN) 32-bit Execution: Jun 29 20:34:10.401878 (XEN) Processor Features: 00001031:00011011 Jun 29 20:34:10.413755 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Jun 29 20:34:10.413816 (XEN) Extensions: GenericTimer Security Jun 29 20:34:10.413861 (XEN) Debug Features: 02010555 Jun 29 20:34:10.425768 (XEN) Auxiliary Features: 00000000 Jun 29 20:34:10.425825 (XEN) Memory Model Features: 10201105 20000000 Jun 29 20:34:10.425871 (XEN) 01240000 02102211 Jun 29 20:34:10.437769 (XEN) ISA Features: 02101110 13112111 21232041 Jun 29 20:34:10.437828 (XEN) 11112131 10011142 00000000 Jun 29 20:34:10.437872 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Jun 29 20:34:10.449816 (XEN) Set SYSRAM to 0000000041000074 (00200074) Jun 29 20:34:10.461767 (XEN) SMP: Allowing 2 CPUs Jun 29 20:34:10.461823 (XEN) enabled workaround for: ARM erratum 766422 Jun 29 20:34:10.461870 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Jun 29 20:34:10.473776 (XEN) GICv2 initialization: Jun 29 20:34:10.473833 (XEN) gic_dist_addr=0000000010481000 Jun 29 20:34:10.473878 (XEN) gic_cpu_addr=0000000010482000 Jun 29 20:34:10.485792 (XEN) gic_hyp_addr=0000000010484000 Jun 29 20:34:10.485853 (XEN) gic_vcpu_addr=0000000010486000 Jun 29 20:34:10.485897 (XEN) gic_maintenance_irq=25 Jun 29 20:34:10.485939 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Jun 29 20:34:10.497773 (XEN) Using scheduler: SMP RTDS Scheduler (rtds) Jun 29 20:34:10.497832 (XEN) Initializing RTDS scheduler Jun 29 20:34:10.509762 (XEN) WARNING: This is experimental software in development. Jun 29 20:34:10.509825 (XEN) Use at your own risk. Jun 29 20:34:10.509867 (XEN) Allocated console ring of 16 KiB. Jun 29 20:34:10.509910 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Jun 29 20:34:10.521819 (XEN) CPU0: Guest atomics will try 1 times before pausing the domain Jun 29 20:34:10.533765 (XEN) Bringing up CPU1 Jun 29 20:34:10.533822 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Jun 29 20:34:10.533873 (XEN) Brought up 2 CPUs Jun 29 20:34:10.533913 (XEN) CPU 1 booted. Jun 29 20:34:10.545760 (XEN) I/O virtualisation disabled Jun 29 20:34:10.545818 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Jun 29 20:34:10.545865 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Jun 29 20:34:10.557762 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Jun 29 20:34:10.557823 (XEN) Initializing RTDS scheduler Jun 29 20:34:10.557866 (XEN) WARNING: This is experimental software in development. Jun 29 20:34:10.569757 (XEN) Use at your own risk. Jun 29 20:34:10.569812 (XEN) common/sched/rt.c:745: RTDS: timer initialized on cpu 0 Jun 29 20:34:10.569861 (XEN) alternatives: Patching with alt table 002c2f84 -> 002c305c Jun 29 20:34:10.581762 (XEN) CPU0 will execute ICIALLU on guest exit Jun 29 20:34:10.581820 (XEN) CPU1 will execute ICIALLU on guest exit Jun 29 20:34:10.593769 (XEN) *** LOADING DOMAIN 0 *** Jun 29 20:34:10.593825 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Jun 29 20:34:10.593873 (XEN) Loading ramdisk from boot module @ 0000000043300000 Jun 29 20:34:10.605728 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Jun 29 20:34:10.605789 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Jun 29 20:34:11.193774 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Jun 29 20:34:11.194612 (XEN) Allocating PPI 16 for event channel interrupt Jun 29 20:34:11.229764 (XEN) d0: extended regions not supported for 32-bit guests Jun 29 20:34:11.229825 (XEN) Loading zImage from 0000000042000000 to 0000000067400000-0000000067e49200 Jun 29 20:34:11.241679 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d94656 Jun 29 20:34:11.337757 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b499 Jun 29 20:34:11.433721 (XEN) Initial low memory virq threshold set at 0x4000 pages. Jun 29 20:34:11.445769 (XEN) Scrubbing Free RAM in background Jun 29 20:34:11.445826 (XEN) Std. Loglevel: All Jun 29 20:34:11.445868 (XEN) Guest Loglevel: All Jun 29 20:34:11.445909 (XEN) *************************************************** Jun 29 20:34:11.457763 (XEN) WARNING: SILO mode is not enabled. Jun 29 20:34:11.457822 (XEN) It has implications on the security of the system, Jun 29 20:34:11.469726 (XEN) unless the communications have been forbidden between Jun 29 20:34:11.469786 (XEN) untrusted domains. Jun 29 20:34:11.469828 (XEN) *************************************************** Jun 29 20:34:11.481709 (XEN) 3... 2... 1... Jun 29 20:34:14.481778 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 29 20:34:14.493738 (XEN) Freed 352kB init memory. Jun 29 20:34:14.493796 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Jun 29 20:34:15.621724 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Jun 29 20:34:15.645756 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Jun 29 20:34:15.645817 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Jun 29 20:34:15.657761 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Jun 29 20:34:15.657822 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 20:34:15.669700 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 29 20:34:15.705730 [ 0.000000] Linux version 6.10.0-rc5+ (osstest@himrod2) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Sat Jun 29 17:14:33 UTC 2024 Jun 29 20:34:15.729754 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 29 20:34:15.729819 [ 0.000000] CPU: div instructions available: patching division code Jun 29 20:34:15.741710 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 29 20:34:15.741710 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 29 20:34:15.753772 [ 0.000000] Memory policy: Data cache writealloc Jun 29 20:34:15.753831 [ 0.000000] Xen 4.19 support found Jun 29 20:34:15.765760 [ 0.000000] efi: UEFI not found. Jun 29 20:34:15.765817 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 on node -1 Jun 29 20:34:15.765872 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 29 20:34:15.777750 [ 0.000000] Zone ranges: Jun 29 20:34:15.777806 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Jun 29 20:34:15.777854 [ 0.000000] Normal empty Jun 29 20:34:15.789746 [ 0.000000] HighMem empty Jun 29 20:34:15.789801 [ 0.000000] Movable zone start for each node Jun 29 20:34:15.789847 [ 0.000000] Early memory node ranges Jun 29 20:34:15.801758 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Jun 29 20:34:15.801820 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Jun 29 20:34:15.813754 [ 0.000000] psci: probing for conduit method from DT. Jun 29 20:34:15.813815 [ 0.000000] psci: PSCIv1.1 detected in firmware. Jun 29 20:34:15.813862 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Jun 29 20:34:15.825784 [ 0.000000] psci: Trusted OS migration not required Jun 29 20:34:15.825845 [ 0.000000] psci: SMC Calling Convention v1.2 Jun 29 20:34:15.837747 [ 0.000000] percpu: Embedded 18 pages/cpu s41428 r8192 d24108 u73728 Jun 29 20:34:15.837810 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 29 20:34:15.861760 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 29 20:34:15.861828 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Jun 29 20:34:15.873786 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 131072 Jun 29 20:34:15.885751 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Jun 29 20:34:15.885816 [ 0.000000] Memory: 414600K/524288K available (15360K kernel code, 2268K rwdata, 6084K rodata, 2048K init, 439K bss, 44152K reserved, 65536K cma-reserved, 0K highmem) Jun 29 20:34:15.897782 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 29 20:34:15.913795 [ 0.000000] trace event string verifier disabled Jun 29 20:34:15.913853 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 29 20:34:15.913900 [ 0.000000] rcu: RCU event tracing is enabled. Jun 29 20:34:15.921641 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Jun 29 20:34:15.933782 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Jun 29 20:34:15.933887 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 29 20:34:15.945754 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 29 20:34:15.945815 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 29 20:34:15.957782 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 29 20:34:15.957843 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Jun 29 20:34:15.969752 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 29 20:34:15.981745 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 29 20:34:15.993752 [ 0.000013] Switching to timer-based delay loop, resolution 41ns Jun 29 20:34:15.993814 [ 0.000536] Console: colour dummy device 80x30 Jun 29 20:34:15.993861 [ 0.000553] printk: legacy console [hvc0] enabled Jun 29 20:34:16.005797 [ 0.299555] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Jun 29 20:34:16.017839 [ 0.309953] CPU: Testing write buffer coherency: ok Jun 29 20:34:16.017902 [ 0.314895] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 29 20:34:16.029866 [ 0.324448] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 29 20:34:16.029929 [ 0.330872] pid_max: default: 32768 minimum: 301 Jun 29 20:34:16.041851 [ 0.335648] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 29 20:34:16.041920 [ 0.342929] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 29 20:34:16.053851 [ 0.351343] /cpus/cpu@0 missing clock-frequency property Jun 29 20:34:16.065776 [ 0.356133] /cpus/cpu@1 missing clock-frequency property Jun 29 20:34:16.065839 [ 0.361536] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 29 20:34:16.065897 [ 0.368253] xen:grant_table: Grant tables using version 1 layout Jun 29 20:34:16.077749 [ 0.373383] Grant table initialized Jun 29 20:34:16.077805 [ 0.376934] xen:events: Using FIFO-based ABI Jun 29 20:34:16.089776 [ 0.381236] Xen: initializing cpu0 Jun 29 20:34:16.089834 [ 0.384759] Setting up static identity map for 0x60300000 - 0x603000ac Jun 29 20:34:16.089885 [ 0.392532] rcu: Hierarchical SRCU implementation. Jun 29 20:34:16.101774 [ 0.396153] rcu: Max phase no-delay instances is 1000. Jun 29 20:34:16.101835 [ 0.404403] EFI services will not be available. Jun 29 20:34:16.113726 [ 0.407728] smp: Bringing up secondary CPUs ... Jun 29 20:34:16.113785 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 20:34:16.185751 [ 0.482975] Xen: initializing cpu1 Jun 29 20:34:16.185808 [ 0.483140] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 29 20:34:16.197851 [ 0.483164] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 29 20:34:16.209660 [ 0.502111] smp: Brought up 1 node, 2 CPUs Jun 29 20:34:16.209660 [ 0.505773] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 29 20:34:16.221637 [ 0.512061] CPU: All CPU(s) started in SVC mode. Jun 29 20:34:16.221637 [ 0.517948] devtmpfs: initialized Jun 29 20:34:16.221637 [ 0.530447] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 29 20:34:16.245772 [ 0.537008] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Jun 29 20:34:16.245843 [ 0.546680] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 29 20:34:16.257757 [ 0.554575] pinctrl core: initialized pinctrl subsystem Jun 29 20:34:16.257817 [ 0.561252] DMI not present or invalid. Jun 29 20:34:16.269741 [ 0.564774] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 29 20:34:16.269804 [ 0.571396] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 29 20:34:16.281762 [ 0.580804] thermal_sys: Registered thermal governor 'step_wise' Jun 29 20:34:16.293746 [ 0.580961] software IO TLB: area num 2. Jun 29 20:34:16.293805 [ 0.589647] software IO TLB: only able to allocate 8 MB Jun 29 20:34:16.293853 [ 0.596721] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Jun 29 20:34:16.305760 [ 0.601923] No ATAGs? Jun 29 20:34:16.305815 [ 0.604244] hw-breakpoint: Failed to enable monitor mode on CPU 0. Jun 29 20:34:16.317700 [ 0.612943] Serial: AMBA PL011 UART driver Jun 29 20:34:16.317700 [ 0.659677] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 65 Jun 29 20:34:16.365742 [ 0.688171] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 29 20:34:16.401699 [ 0.712156] xen:balloon: Initialising balloon driver Jun 29 20:34:16.425738 [ 0.718602] iommu: Default domain type: Translated Jun 29 20:34:16.425799 [ 0.722017] iommu: DMA domain TLB invalidation policy: strict mode Jun 29 20:34:16.437735 [ 0.730866] SCSI subsystem initialized Jun 29 20:34:16.437793 [ 0.733634] usbcore: registered new interface driver usbfs Jun 29 20:34:16.437841 [ 0.738865] usbcore: registered new interface driver hub Jun 29 20:34:16.449797 [ 0.744214] usbcore: registered new device driver usb Jun 29 20:34:16.449858 [ 0.750910] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 29 20:34:16.461749 [ 0.754522] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 29 20:34:16.461810 [ 0.760778] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 29 20:34:16.473723 [ 0.765840] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 29 20:34:16.473723 [ 0.770779] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 29 20:34:16.485743 [ 0.776790] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 29 20:34:16.485809 [ 0.782572] pps_core: LinuxPPS API ver. 1 registered Jun 29 20:34:16.485857 [ 0.786961] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 29 20:34:16.497773 [ 0.796187] PTP clock support registered Jun 29 20:34:16.509753 [ 0.800420] EDAC MC: Ver: 3.0.0 Jun 29 20:34:16.509810 [ 0.803681] scmi_core: SCMI protocol bus registered Jun 29 20:34:16.509858 [ 0.810367] vgaarb: loaded Jun 29 20:34:16.521763 [ 0.814134] clocksource: Switched to clocksource arch_sys_counter Jun 29 20:34:16.521827 [ 0.831491] NET: Registered PF_INET protocol family Jun 29 20:34:16.533721 [ 0.835177] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Jun 29 20:34:16.545778 [ 0.843038] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 29 20:34:16.557780 [ 0.850746] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 29 20:34:16.557847 [ 0.858537] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Jun 29 20:34:16.569776 [ 0.866371] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Jun 29 20:34:16.581740 [ 0.873646] TCP: Hash tables configured (established 4096 bind 4096) Jun 29 20:34:16.581803 [ 0.880024] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 29 20:34:16.593771 [ 0.886590] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 29 20:34:16.593835 [ 0.893685] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 29 20:34:16.605735 [ 0.902225] RPC: Registered named UNIX socket transport module. Jun 29 20:34:16.605797 [ 0.906777] RPC: Registered udp transport module. Jun 29 20:34:16.617750 [ 0.911537] RPC: Registered tcp transport module. Jun 29 20:34:16.617809 [ 0.916324] RPC: Registered tcp-with-tls transport module. Jun 29 20:34:16.629730 [ 0.921877] RPC: Registered tcp NFSv4.1 backchannel transport module. Jun 29 20:34:16.629730 [ 0.928392] PCI: CLS 0 bytes, default 64 Jun 29 20:34:16.641745 [ 0.933802] Initialise system trusted keyrings Jun 29 20:34:16.641829 [ 0.937117] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Jun 29 20:34:16.641883 [ 0.943647] squashfs: version 4.0 (2009/01/31) Phillip Lougher Jun 29 20:34:16.653764 [ 0.949543] Trying to unpack rootfs image as initramfs... Jun 29 20:34:16.653825 [ 0.974547] NFS: Registering the id_resolver key type Jun 29 20:34:16.677730 [ 0.978284] Key type id_resolver registered Jun 29 20:34:16.689772 [ 0.982488] Key type id_legacy registered Jun 29 20:34:16.689830 [ 0.986601] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Jun 29 20:34:16.701751 [ 0.993345] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Jun 29 20:34:16.701819 [ 1.016160] Key type asymmetric registered Jun 29 20:34:16.725747 [ 1.018909] Asymmetric key parser 'x509' registered Jun 29 20:34:16.725807 [ 1.023894] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) Jun 29 20:34:16.737762 [ 1.031329] io scheduler mq-deadline registered Jun 29 20:34:16.737821 [ 1.035930] io scheduler kyber registered Jun 29 20:34:16.749701 [ 1.040019] io scheduler bfq registered Jun 29 20:34:16.749759 [ 1.170638] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 29 20:34:16.881766 [ 1.176896] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 29 20:34:16.893692 [ 1.213698] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 29 20:34:16.929739 [ 1.219958] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 29 20:34:16.929812 [ 1.260101] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 29 20:34:16.965824 [ 1.266361] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 29 20:34:16.977804 [ 1.305349] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 29 20:34:17.013813 [ 1.311562] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 29 20:34:17.025777 [ 1.324428] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 29 20:34:17.037750 [ 1.406122] xen:xen_evtchn: Event-channel device installed Jun 29 20:34:17.110116 [ 1.497785] Freeing initrd memory: 11860K Jun 29 20:34:17.205806 [ 1.556032] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 29 20:34:17.265836 [ 1.567099] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 29 20:34:17.277855 [ 1.575329] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 29 20:34:17.289729 [ 1.584213] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 29 20:34:17.301733 [ 1.593166] SuperH (H)SCI(F) driver initialized Jun 29 20:34:17.301766 [ 1.597515] STMicroelectronics ASC driver initialized Jun 29 20:34:17.301792 [ 1.602368] STM32 USART driver initialized Jun 29 20:34:17.313785 [ 1.607835] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 29 20:34:17.313822 [ 1.616527] random: crng init done Jun 29 20:34:17.325685 [ 1.624319] brd: module loaded Jun 29 20:34:17.325716 [ 1.630253] loop: module loaded Jun 29 20:34:17.337682 [ 1.666860] Invalid max_queues (4), will use default max: 2. Jun 29 20:34:17.373705 [ 1.685709] tun: Universal TUN/TAP device driver, 1.6 Jun 29 20:34:17.397833 [ 1.689574] CAN device driver interface Jun 29 20:34:17.397892 [ 1.694768] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Jun 29 20:34:17.397941 [ 1.705975] xen_netfront: Initialising Xen virtual ethernet driver Jun 29 20:34:17.409714 [ 1.710841] pegasus: Pegasus/Pegasus II USB Ethernet driver Jun 29 20:34:17.421739 [ 1.716460] usbcore: registered new interface driver pegasus Jun 29 20:34:17.421773 [ 1.722170] usbcore: registered new interface driver asix Jun 29 20:34:17.433752 [ 1.727654] usbcore: registered new interface driver ax88179_178a Jun 29 20:34:17.433787 [ 1.733801] usbcore: registered new interface driver cdc_ether Jun 29 20:34:17.445737 [ 1.739715] usbcore: registered new interface driver smsc75xx Jun 29 20:34:17.445771 [ 1.745539] usbcore: registered new interface driver smsc95xx Jun 29 20:34:17.457738 [ 1.751336] usbcore: registered new interface driver net1080 Jun 29 20:34:17.457772 [ 1.757089] usbcore: registered new interface driver cdc_subset Jun 29 20:34:17.469837 [ 1.763056] usbcore: registered new interface driver zaurus Jun 29 20:34:17.469899 [ 1.768711] usbcore: registered new interface driver cdc_ncm Jun 29 20:34:17.481780 [ 1.778137] usbcore: registered new interface driver usb-storage Jun 29 20:34:17.481836 [ 1.788798] i2c_dev: i2c /dev entries driver Jun 29 20:34:17.493759 [ 1.809445] device-mapper: uevent: version 1.0.3 Jun 29 20:34:17.517746 [ 1.812892] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev Jun 29 20:34:17.529806 [ 1.822484] cpu cpu0: OPP table can't be empty Jun 29 20:34:17.529859 [ 1.827221] failed to register cpuidle driver Jun 29 20:34:17.529906 [ 1.830580] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Jun 29 20:34:17.541800 [ 1.838950] sdhci: Secure Digital Host Controller Interface driver Jun 29 20:34:17.553793 [ 1.843933] sdhci: Copyright(c) Pierre Ossman Jun 29 20:34:17.553845 [ 1.852052] sdhci-pltfm: SDHCI platform and OF driver helper Jun 29 20:34:17.565781 [ 1.859836] ledtrig-cpu: registered to indicate activity on CPUs Jun 29 20:34:17.565838 [ 1.865329] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Jun 29 20:34:17.577795 [ 1.871946] usbcore: registered new interface driver usbhid Jun 29 20:34:17.577849 [ 1.876649] usbhid: USB HID core driver Jun 29 20:34:17.589738 [ 1.887596] NET: Registered PF_INET6 protocol family Jun 29 20:34:17.589767 [ 1.892096] Segment Routing with IPv6 Jun 29 20:34:17.601756 [ 1.895002] In-situ OAM (IOAM) with IPv6 Jun 29 20:34:17.601785 [ 1.898979] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Jun 29 20:34:17.613830 [ 1.905500] NET: Registered PF_PACKET protocol family Jun 29 20:34:17.613891 [ 1.910033] can: controller area network core Jun 29 20:34:17.613937 [ 1.914520] NET: Registered PF_CAN protocol family Jun 29 20:34:17.625718 [ 1.919314] can: raw protocol Jun 29 20:34:17.625745 [ 1.922353] can: broadcast manager protocol Jun 29 20:34:17.625769 [ 1.926635] can: netlink gateway - max_hops=1 Jun 29 20:34:17.637748 [ 1.931345] Key type dns_resolver registered Jun 29 20:34:17.637800 [ 1.936069] ThumbEE CPU extension supported. Jun 29 20:34:17.649666 [ 1.939715] Registering SWP/SWPB emulation handler Jun 29 20:34:17.649719 [ 1.954055] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level Jun 29 20:34:17.661714 [ 1.960985] Loading compiled-in X.509 certificates Jun 29 20:34:17.673632 [ 2.003921] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 29 20:34:17.709638 [ 2.007596] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 29 20:34:17.721668 [ 2.014708] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 29 20:34:17.721707 [ 2.022281] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 29 20:34:17.733633 [ 2.064291] s5m-rtc s5m-rtc: registered as rtc0 Jun 29 20:34:17.769700 [ 2.073143] s5m-rtc s5m-rtc: setting system clock to 2024-06-29T20:34:19 UTC (1719693259) Jun 29 20:34:17.781788 [ 2.084294] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 29 20:34:17.793729 [ 2.088912] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 29 20:34:17.793762 [ 2.093271] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 29 20:34:17.805724 [ 2.100128] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 29 20:34:17.805803 [ 2.106069] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 29 20:34:17.817713 [ 2.112155] clk: Not disabling unused clocks Jun 29 20:34:17.817713 [ 2.115770] PM: genpd: Disabling unused power domains Jun 29 20:34:17.829743 [ 2.124345] Freeing unused kernel image (initmem) memory: 2048K Jun 29 20:34:17.829811 [ 2.130569] Run /init as init process Jun 29 20:34:17.841680 Loading, please wait... Jun 29 20:34:17.865686 Starting systemd-udevd version 252.26-1~deb12u2 Jun 29 20:34:17.937670 [ 3.392619] i2c-gpio i2c-10: using lines 552 (SDA) and 553 (SCL) Jun 29 20:34:19.101723 [ 3.518274] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 29 20:34:19.233682 [ 3.536997] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 29 20:34:19.245752 [ 3.548627] phy phy-12130000.phy.6: phy_power_on was called before phy_init Jun 29 20:34:19.257734 [ 3.554819] exynos-ohci 12120000.usb: USB Host Controller Jun 29 20:34:19.269751 [ 3.560064] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Jun 29 20:34:19.269826 [ 3.573634] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 29 20:34:19.281758 [ 3.574055] phy phy-12130000.phy.6: phy_power_on was called before phy_init Jun 29 20:34:19.293783 [ 3.588138] exynos-ehci 12110000.usb: EHCI Host Controller Jun 29 20:34:19.293845 [ 3.593698] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Jun 29 20:34:19.305683 [ 3.628203] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 Jun 29 20:34:19.341689 [ 3.633821] Synopsys Designware Multimedia Card Interface Driver Jun 29 20:34:19.341756 [ 3.660259] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 29 20:34:19.365745 [ 3.667189] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 29 20:34:19.377778 [ 3.675866] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 Jun 29 20:34:19.389728 [ 3.678531] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 29 20:34:19.389796 [ 3.694458] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 29 20:34:19.401774 [ 3.700152] ahci-dwc 122f0000.sata: AHCI vers 0001.0300, 32 command slots, 6 Gbps, platform mode Jun 29 20:34:19.413766 [ 3.709032] ahci-dwc 122f0000.sata: 1/1 ports implemented (port mask 0x1) Jun 29 20:34:19.425717 [ 3.715875] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 29 20:34:19.425788 [ 3.746043] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 29 20:34:19.449730 [ 3.754307] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 29 20:34:19.461729 [ 3.766399] hub 1-0:1.0: USB hub found Jun 29 20:34:19.473730 [ 3.770480] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 29 20:34:19.485706 [ 3.770600] hub 1-0:1.0: 3 ports detected Jun 29 20:34:19.485765 [ 3.827700] hub 2-0:1.0: USB hub found Jun 29 20:34:19.533722 [ 3.830491] hub 2-0:1.0: 3 ports detected Jun 29 20:34:19.533780 [ 3.836777] s2mps11-clk s5m8767-clk: DMA mask not set Jun 29 20:34:19.545708 [ 3.873878] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Jun 29 20:34:19.581716 [ 3.880217] s3c-rtc 101e0000.rtc: registered as rtc1 Jun 29 20:34:19.593747 [ 3.884242] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 29 20:34:19.593816 [ 3.890345] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 29 20:34:19.605775 [ 3.895921] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 127,32 bit host data width,128 deep fifo Jun 29 20:34:19.605849 [ 3.905814] mmc_host mmc0: card is polling. Jun 29 20:34:19.617743 [ 3.910004] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 29 20:34:19.617806 [ 3.916145] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 29 20:34:19.629751 [ 3.921644] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 128,32 bit host data width,128 deep fifo Jun 29 20:34:19.629854 [ 3.924781] scsi host0: ahci-dwc Jun 29 20:34:19.641757 [ 3.935197] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 126 lpm-pol 0 Jun 29 20:34:19.641827 [ 3.954313] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 29 20:34:19.665764 [ 3.964256] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 29 20:34:19.677706 [ 4.078370] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 29 20:34:19.785779 [ 4.086869] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 29 20:34:19.797762 [ 4.087108] mmc1: new high speed SDHC card at address aaaa Jun 29 20:34:19.809760 [ 4.102708] mmc0: new DDR MMC card at address 0001 Jun 29 20:34:19.809820 [ 4.103457] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Jun 29 20:34:19.809866 [ 4.117221] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Jun 29 20:34:19.821675 [ 4.129578] mmcblk0: p1 p2 p3 p4 Jun 29 20:34:19.833750 [ 4.132841] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Jun 29 20:34:19.845713 [ 4.142500] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Jun 29 20:34:19.845773 [ 4.153044] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Jun 29 20:34:19.857731 [ 4.454275] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 29 20:34:20.157727 [ 4.460598] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 29 20:34:20.169783 [ 4.465962] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 29 20:34:20.181734 [ 4.474180] ata1.00: configured for UDMA/133 Jun 29 20:34:20.181793 [ 4.479579] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 29 20:34:20.197636 [ 4.490397] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 29 20:34:20.197704 [ 4.496545] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 29 20:34:20.213658 [ 4.502414] sd 0:0:0:0: [sda] Write Protect is off Jun 29 20:34:20.213718 [ 4.507507] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 29 20:34:20.229678 [ 4.516595] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 29 20:34:20.229742 [ 4.541912] sda: sda1 sda2 < sda5 > Jun 29 20:34:20.245721 [ 4.545199] sd 0:0:0:0: [sda] Attached SCSI disk Jun 29 20:34:20.257668 [ 4.585680] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Jun 29 20:34:20.293729 [ 4.633129] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 29 20:34:20.341754 [ 4.638197] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 29 20:34:20.353687 [ 4.719169] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002000010 Jun 29 20:34:20.425754 [ 4.727555] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Jun 29 20:34:20.437757 [ 4.733476] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 29 20:34:20.437818 [ 4.738897] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 29 20:34:20.449760 [ 4.746581] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 29 20:34:20.461752 [ 4.755131] hub 3-0:1.0: USB hub found Jun 29 20:34:20.461810 [ 4.757585] hub 3-0:1.0: 1 port detected Jun 29 20:34:20.461855 [ 4.762391] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 29 20:34:20.473740 [ 4.770710] hub 4-0:1.0: USB hub found Jun 29 20:34:20.473796 [ 4.787193] hub 4-0:1.0: 1 port detected Jun 29 20:34:20.497688 [ 4.983521] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 29 20:34:20.701674 [ 5.152970] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 29 20:34:20.869687 [ 5.291500] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 29 20:34:21.001735 [ 5.399714] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 29 20:34:21.109742 [ 5.508865] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 29 20:34:21.217760 [ 5.617681] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 29 20:34:21.325748 [ 5.960678] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 29 20:34:21.673707 [ 6.134605] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 29 20:34:21.844627 [ 6.248952] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 29 20:34:21.964590 [ 6.356725] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 29 20:34:22.072593 [ 6.464488] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 29 20:34:22.180577 [ 6.572203] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 29 20:34:22.288623 [ 6.579825] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 29 20:34:22.288623 Begin: Loading essential drivers ... done. Jun 29 20:34:22.336581 Begin: Running /scripts/init-premount ... done. Jun 29 20:34:25.356634 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 29 20:34:25.356634 Begin: Running /scripts/local-premount ... done. Jun 29 20:34:25.368580 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 29 20:34:25.464585 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 29 20:34:25.584632 /dev/mapper/arndale--metrocentre--vg-root: clean, 46073/1220608 files, 606069/4882432 blocks Jun 29 20:34:25.848535 done. Jun 29 20:34:25.860728 [ 10.158456] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 29 20:34:25.872556 [ 10.527720] EXT4-fs (dm-0): mounted filesystem c58c01de-2a0d-467e-9a9b-d5bdb747cef1 ro with ordered data mode. Quota mode: disabled. Jun 29 20:34:26.244545 done. Jun 29 20:34:26.244545 Begin: Running /scripts/local-bottom ... done. Jun 29 20:34:26.280603 Begin: Running /scripts/init-bottom ... done. Jun 29 20:34:26.328756 INIT: version 3.06 booting Jun 29 20:34:26.796470 INIT: No inittab.d directory found Jun 29 20:34:26.892567 Using makefile-style concurrent boot in runlevel S. Jun 29 20:34:27.168548 Starting hotplug events dispatcher: systemd-udevd. Jun 29 20:34:28.752600 Synthesizing the initial hotplug events (subsystems)...done. Jun 29 20:34:29.220607 Synthesizing the initial hotplug events (devices)...done. Jun 29 20:34:30.040593 Waiting for /dev to be fully populated...[ 14.485321] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 29 20:34:30.196655 [ 14.487396] usb3503 usb-hub: switched to HUB mode Jun 29 20:34:30.196655 [ 14.497043] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 29 20:34:30.208574 [ 14.579188] mc: Linux media interface: v0.10 Jun 29 20:34:30.280596 [ 14.591167] s5p-secss 10830000.sss: s5p-sss driver registered Jun 29 20:34:30.304564 [ 14.824677] videodev: Linux video capture interface: v2.00 Jun 29 20:34:30.532611 [ 14.834852] usb 2-3: new high-speed USB device number 2 using exynos-ehci Jun 29 20:34:30.544716 [ 15.024407] s5p-mfc 11000000.codec: Adding to iommu group 0 Jun 29 20:34:30.736599 [ 15.037866] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Jun 29 20:34:30.748608 [ 15.065974] hub 2-3:1.0: USB hub found Jun 29 20:34:30.772625 [ 15.070878] hub 2-3:1.0: 3 ports detected Jun 29 20:34:30.772625 [ 15.088198] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 29 20:34:30.796639 [ 15.097448] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 29 20:34:30.808644 [ 15.106115] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 29 20:34:30.820679 [ 15.121323] s5p-mfc 11000000.codec: decoder registered as /dev/video0 Jun 29 20:34:30.832631 [ 15.127480] s5p-mfc 11000000.codec: encoder registered as /dev/video1 Jun 29 20:34:30.832631 [ 15.239017] exynos-gsc 13e00000.gsc: Adding to iommu group 1 Jun 29 20:34:30.952613 [ 15.247277] exynos-gsc 13e10000.gsc: Adding to iommu group 2 Jun 29 20:34:30.952613 [ 15.269431] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 29 20:34:30.976637 [ 15.278769] exynos-gsc 13e20000.gsc: Adding to iommu group 3 Jun 29 20:34:30.988606 [ 15.290474] exynos-gsc 13e30000.gsc: Adding to iommu group 4 Jun 29 20:34:31.000598 [ 15.329394] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Jun 29 20:34:31.036620 [ 15.396826] wm8994 3-001a: Device is not a WM8994, ID is 0 Jun 29 20:34:31.106247 [ 15.403299] wm8994 3-001a: probe with driver wm8994 failed with error -22 Jun 29 20:34:31.120617 [ 15.404215] usb 2-3.2: new high-speed USB device number 3 using exynos-ehci Jun 29 20:34:31.120617 [ 15.443417] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 29 20:34:31.156601 [ 15.578007] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 29 20:34:31.288646 [ 15.586517] hub 2-3.2:1.0: USB hub found Jun 29 20:34:31.288646 [ 15.591302] hub 2-3.2:1.0: 4 ports detected Jun 29 20:34:31.300590 [ 15.689358] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 29 20:34:31.396660 [ 15.797625] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 29 20:34:31.504793 [ 15.907303] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 29 20:34:31.624596 [ 15.924354] usb 2-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 29 20:34:31.636596 [ 15.953361] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 29 20:34:31.660645 [ 15.961135] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 29 20:34:31.672649 [ 15.969841] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 29 20:34:31.684643 [ 15.981513] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 29 20:34:31.696651 [ 15.989370] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 29 20:34:31.696651 [ 15.998110] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 29 20:34:31.708633 [ 16.127328] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 29 20:34:31.840755 [ 16.139158] I/O error, dev mmcblk1, sector 7743713 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 Jun 29 20:34:31.864770 [ 16.247288] I/O error, dev mmcblk1, sector 7743714 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 Jun 29 20:34:31.960570 [ 16.531295] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 29 20:34:32.248746 [ 16.703882] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 29 20:34:32.416796 [ 16.806077] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 29 20:34:32.526826 [ 16.818350] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 29 20:34:32.526894 [ 16.827942] Asix Electronics AX88772A usb-002:004:10: attached PHY driver (mii_bus:phy_addr=usb-002:004:10, irq=POLL) Jun 29 20:34:32.540841 [ 16.837796] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, da:f0:c4:84:61:11 Jun 29 20:34:32.552724 [ 16.877490] usbcore: registered new device driver onboard-usb-dev Jun 29 20:34:32.588644 [ 16.884216] usb 2-3.2.4: USB disconnect, device number 4 Jun 29 20:34:32.588644 [ 16.888473] asix 2-3.2.4:1.0 eth0: unregister 'asix' usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet Jun 29 20:34:32.598049 [ 16.926148] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 29 20:34:32.636609 [ 17.033882] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 29 20:34:32.744609 [ 17.065015] hub 2-3.2:1.0: USB hub found Jun 29 20:34:32.768617 [ 17.067974] hub 2-3.2:1.0: 4 ports detected Jun 29 20:34:32.780596 [ 17.082215] hub 2-3.2:1.0: USB hub found Jun 29 20:34:32.792605 [ 17.085323] hub 2-3.2:1.0: 4 ports detected Jun 29 20:34:32.792605 [ 17.142322] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 29 20:34:32.851616 [ 17.149972] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 29 20:34:32.868570 [ 17.424307] usb 2-3.2.4: new high-speed USB device number 5 using exynos-ehci Jun 29 20:34:33.132824 [ 18.266239] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:005:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 29 20:34:33.980626 [ 18.281106] Asix Electronics AX88772A usb-002:005:10: attached PHY driver (mii_bus:phy_addr=usb-002:005:10, irq=POLL) Jun 29 20:34:33.992644 [ 18.290959] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, da:f0:c4:84:61:11 Jun 29 20:34:34.004607 [ 18.378318] asix 2-3.2.4:1.0 enxdaf0c4846111: renamed from eth0 Jun 29 20:34:34.088602 done. Jun 29 20:34:34.172576 [ 18.886648] EXT4-fs (dm-0): re-mounted c58c01de-2a0d-467e-9a9b-d5bdb747cef1 r/w. Quota mode: disabled. Jun 29 20:34:34.592632 Checking file systems.../dev/sda1: clean, 2179/61056 files, 44464/243968 blocks Jun 29 20:34:35.616495 done. Jun 29 20:34:35.628571 Cleaning up temporary files... /tmp. Jun 29 20:34:35.832559 [ 20.332168] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 29 20:34:36.040533 [ 20.384161] EXT4-fs (sda1): mounted filesystem bfc2f879-87f2-4292-8d88-e51527b92b0d r/w with ordered data mode. Quota mode: disabled. Jun 29 20:34:36.100504 [ 20.484486] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k Jun 29 20:34:36.196527 Mounting local filesystems...done. Jun 29 20:34:36.464681 Activating swapfile swap, if any...done. Jun 29 20:34:36.464681 Cleaning up temporary files.... Jun 29 20:34:36.500664 Starting Setting kernel variables: sysctl. Jun 29 20:34:36.656494 Configuring network interfaces...RTNETLINK answers: Operation not supported Jun 29 20:34:37.368615 done. Jun 29 20:34:37.368615 Cleaning up temporary files.... Jun 29 20:34:37.452501 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Jun 29 20:34:37.620527 Starting nftables: none Jun 29 20:34:37.632488 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Jun 29 20:34:37.728539 failed! Jun 29 20:34:37.728539 startpar: service(s) returned failure: nftables ... failed! Jun 29 20:34:37.740493 INIT: Entering runlevel: 2 Jun 29 20:34:37.752499 Using makefile-style concurrent boot in runlevel 2. Jun 29 20:34:37.764137 Starting Apache httpd web server: apache2[ 27.535980] platform sound: deferred probe pending: arndale-audio: snd_soc_register_card() failed Jun 29 20:34:43.245792 AH00557: apache2: apr_sockaddr_info_get() failed for arndale-metrocentre Jun 29 20:35:03.477791 AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1. Set the 'ServerName' directive globally to suppress this message Jun 29 20:35:03.501782 . Jun 29 20:35:16.620723 Starting NTP server: ntpd Jun 29 20:35:16.656671 2024-06-29T20:35:19 ntpd[1108]: INIT: ntpd ntpsec-1.2.2: Starting Jun 29 20:35:17.112741 2024-06-29T20:35:19 ntpd[1108]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 29 20:35:17.124673 . Jun 29 20:35:17.124673 Starting SMP IRQ Balancer: irqbalance. Jun 29 20:35:17.340712 Starting system message bus: dbus. Jun 29 20:35:17.736682 Starting OpenBSD Secure Shell server: sshd. Jun 29 20:35:18.312530 Starting /usr/local/sbin/oxenstored.... Jun 29 20:35:21.464587 Setting domain 0 name, domid and JSON config... Jun 29 20:35:21.464587 Done setting up Dom0 Jun 29 20:35:21.476569 Starting xenconsoled... Jun 29 20:35:21.476569 Starting QEMU as disk backend for dom0 Jun 29 20:35:21.476569 Jun 29 20:35:22.568544 Debian GNU/Linux 12 arndale-metrocentre hvc0 Jun 29 20:35:22.580533 Jun 29 20:35:22.580533 arndale-metrocentre login: INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 20:37:01.617747 Jun 29 20:40:50.199646 (XEN) *** Serial input to Xen (type 'CTRL-x' three times to switch input) Jun 29 20:40:50.221745 Jun 29 20:40:50.223315 Jun 29 20:40:51.203080 (XEN) '0' pressed -> dumping Dom0's registers Jun 29 20:40:51.217804 (XEN) *** Dumping Dom0 vcpu#0 state: *** Jun 29 20:40:51.217864 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Jun 29 20:40:51.220198 Not tainted ]---- Jun 29 20:40:51.229733 (XEN) CPU: 0 Jun 29 20:40:51.229785 (XEN) PC: c03dba20 Jun 29 20:40:51.229827 (XEN) CPSR: 600e0193 MODE:32-bit Guest SVC Jun 29 20:40:51.229873 (XEN) R0: dbb8d140 R1: 200e0193 R2: 00000000 R3: 00009cad Jun 29 20:40:51.241814 (XEN) R4: c03e706c R5: dbb8d180 R6: dbb8d140 R7: dbb8d194 Jun 29 20:40:51.241876 (XEN) R8: dbb8d140 R9: c5517058 R10:200e0193 R11:c1d26890 R12:c5dc45b8 Jun 29 20:40:51.253777 (XEN) USR: SP: bede9938 LR: b6b67853 Jun 29 20:40:51.253849 (XEN) SVC: SP: c1b01e38 LR: c03dba0c SPSR:600e0013 Jun 29 20:40:51.253899 (XEN) ABT: SP: c1d38b10 LR: c0300ec0 SPSR:60010193 Jun 29 20:40:51.265772 (XEN) UND: SP: c1d38b20 LR: c0300fc0 SPSR:600e0093 Jun 29 20:40:51.265832 (XEN) IRQ: SP: c1d38b00 LR: c0300bc0 SPSR:600e0193 Jun 29 20:40:51.277718 (XEN) FIQ: SP: c1d38b30 LR: c1d38b30 SPSR:00000000 Jun 29 20:40:51.277779 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Jun 29 20:40:51.277829 (XEN) Jun 29 20:40:51.289726 (XEN) SCTLR: 10c5387d Jun 29 20:40:51.289757 (XEN) TCR: 00000000 Jun 29 20:40:51.289781 (XEN) TTBR0: 000000006704c06a Jun 29 20:40:51.289805 (XEN) TTBR1: 000000006020406a Jun 29 20:40:51.289828 (XEN) IFAR: b6f23c34, IFSR: 00000007 Jun 29 20:40:51.301769 (XEN) DFAR: b6ca6ffc, DFSR: 00000817 Jun 29 20:40:51.301829 (XEN) Jun 29 20:40:51.301868 (XEN) VTCR_EL2: 80003558 Jun 29 20:40:51.301911 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 29 20:40:51.313762 (XEN) Jun 29 20:40:51.313814 (XEN) SCTLR_EL2: 30cd187f Jun 29 20:40:51.313858 (XEN) HCR_EL2: 007c663f Jun 29 20:40:51.313900 (XEN) TTBR0_EL2: 0000000041107000 Jun 29 20:40:51.313943 (XEN) Jun 29 20:40:51.313981 (XEN) ESR_EL2: 07e00000 Jun 29 20:40:51.325758 (XEN) HPFAR_EL2: 00104810 Jun 29 20:40:51.325815 (XEN) HDFAR: e0807f00 Jun 29 20:40:51.325858 (XEN) HIFAR: c0d9e04c Jun 29 20:40:51.325901 (XEN) Jun 29 20:40:51.325940 (XEN) Guest stack trace from sp=c1b01e38: Jun 29 20:40:51.337773 (XEN) Failed to convert stack to physical address Jun 29 20:40:51.337834 (XEN) *** Dumping Dom0 vcpu#1 state: *** Jun 29 20:40:51.337880 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Not tainted ]---- Jun 29 20:40:51.349727 (XEN) CPU: 0 Jun 29 20:40:51.349781 (XEN) PC: c031be28 Jun 29 20:40:51.349850 (XEN) CPSR: 60070093 MODE:32-bit Guest SVC Jun 29 20:40:51.349898 (XEN) R0: 00000005 R1: 00000000 R2: 00012821 R3: c031be20 Jun 29 20:40:51.361765 (XEN) R4: c2110880 R5: c1d26f50 R6: c1b04e5c R7: c1b04e98 Jun 29 20:40:51.361826 (XEN) R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:c1d264a0 Jun 29 20:40:51.373775 (XEN) USR: SP: be847960 LR: b6dd4685 Jun 29 20:40:51.373832 (XEN) SVC: SP: e08d9fa0 LR: c114e058 SPSR:60070013 Jun 29 20:40:51.373879 (XEN) ABT: SP: c1d38b50 LR: c0300ec0 SPSR:60030193 Jun 29 20:40:51.385759 (XEN) UND: SP: c1d38b60 LR: c0300fc0 SPSR:60000093 Jun 29 20:40:51.385817 (XEN) IRQ: SP: c1d38b40 LR: c0300bc0 SPSR:60070193 Jun 29 20:40:51.397768 (XEN) FIQ: SP: c1d38b70 LR: c1d38b70 SPSR:00000000 Jun 29 20:40:51.397826 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Jun 29 20:40:51.409771 (XEN) Jun 29 20:40:51.409823 (XEN) SCTLR: 10c5387d Jun 29 20:40:51.409866 (XEN) TCR: 00000000 Jun 29 20:40:51.409907 (XEN) TTBR0: 0000000064e1006a Jun 29 20:40:51.409948 (XEN) TTBR1: 000000006020406a Jun 29 20:40:51.421749 (XEN) IFAR: b6eeb0e4, IFSR: 00000007 Jun 29 20:40:51.421807 (XEN) DFAR: 00486ffc, DFSR: 00000817 Jun 29 20:40:51.421852 (XEN) Jun 29 20:40:51.421889 (XEN) VTCR_EL2: 80003558 Jun 29 20:40:51.421929 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 29 20:40:51.433768 (XEN) Jun 29 20:40:51.433820 (XEN) SCTLR_EL2: 30cd187f Jun 29 20:40:51.433862 (XEN) HCR_EL2: 007c663f Jun 29 20:40:51.433903 (XEN) TTBR0_EL2: 0000000041107000 Jun 29 20:40:51.433944 (XEN) Jun 29 20:40:51.433981 (XEN) ESR_EL2: 07e00000 Jun 29 20:40:51.445749 (XEN) HPFAR_EL2: 00104810 Jun 29 20:40:51.445803 (XEN) HDFAR: e0807f00 Jun 29 20:40:51.445845 (XEN) HIFAR: c0d9e04c Jun 29 20:40:51.445886 (XEN) Jun 29 20:40:51.445923 (XEN) Guest stack trace from sp=e08d9fa0: Jun 29 20:40:51.457697 (XEN) Failed to convert stack to physical address Jun 29 20:40:51.457763 Jun 29 20:40:53.201867 (XEN) 'H' pressed -> dumping heap info (now = 402879577500) Jun 29 20:40:53.221849 (XEN) heap[node=0][zone=0] -> 16284 pages Jun 29 20:40:53.221907 (XEN) heap[node=0][zone=1] -> 0 Jun 29 20:40:53.224239 pages Jun 29 20:40:53.233713 (XEN) heap[node=0][zone=2] -> 0 pages Jun 29 20:40:53.233769 (XEN) heap[node=0][zone=3] -> 0 pages Jun 29 20:40:53.233814 (XEN) heap[node=0][zone=4] -> 0 pages Jun 29 20:40:53.233856 (XEN) heap[node=0][zone=5] -> 0 pages Jun 29 20:40:53.245785 (XEN) heap[node=0][zone=6] -> 0 pages Jun 29 20:40:53.245843 (XEN) heap[node=0][zone=7] -> 0 pages Jun 29 20:40:53.245886 (XEN) heap[node=0][zone=8] -> 0 pages Jun 29 20:40:53.257737 (XEN) heap[node=0][zone=9] -> 0 pages Jun 29 20:40:53.257796 (XEN) heap[node=0][zone=10] -> 0 pages Jun 29 20:40:53.257847 (XEN) heap[node=0][zone=11] -> 0 pages Jun 29 20:40:53.257890 (XEN) heap[node=0][zone=12] -> 0 pages Jun 29 20:40:53.269754 (XEN) heap[node=0][zone=13] -> 0 pages Jun 29 20:40:53.269811 (XEN) heap[node=0][zone=14] -> 0 pages Jun 29 20:40:53.269855 (XEN) heap[node=0][zone=15] -> 0 pages Jun 29 20:40:53.281710 (XEN) heap[node=0][zone=16] -> 0 pages Jun 29 20:40:53.281769 (XEN) heap[node=0][zone=17] -> 0 pages Jun 29 20:40:53.281813 (XEN) heap[node=0][zone=18] -> 0 pages Jun 29 20:40:53.281856 (XEN) heap[node=0][zone=19] -> 130833 pages Jun 29 20:40:53.293759 (XEN) heap[node=0][zone=20] -> 241626 pages Jun 29 20:40:53.293817 (XEN) heap[node=0][zone=21] -> 0 pages Jun 29 20:40:53.293861 (XEN) heap[node=0][zone=22] -> 0 pages Jun 29 20:40:53.305753 (XEN) heap[node=0][zone=23] -> 0 pages Jun 29 20:40:53.305810 (XEN) heap[node=0][zone=24] -> 0 pages Jun 29 20:40:53.305854 (XEN) heap[node=0][zone=25] -> 0 pages Jun 29 20:40:53.317750 (XEN) heap[node=0][zone=26] -> 0 pages Jun 29 20:40:53.317810 (XEN) heap[node=0][zone=27] -> 0 pages Jun 29 20:40:53.317861 (XEN) heap[node=0][zone=28] -> 0 pages Jun 29 20:40:53.317904 Jun 29 20:40:55.211175 Jun 29 20:40:56.971647 Jun 29 20:40:57.226290 Jun 29 20:40:58.979932 Jun 29 20:40:59.225133 (XEN) Dumping timer queues: Jun 29 20:40:59.245842 (XEN) CPU00: Jun 29 20:40:59.245895 (XEN) ex= 2914us timer=43fef968 cb=vtimer.c#virt_timer_expired(43fef960) Jun 29 20:40:59.245949 (XEN) CPU0 Jun 29 20:40:59.248256 1: Jun 29 20:40:59.257684 (XEN) ex= 32914us timer=43fdc968 cb=vtimer.c#virt_timer_expired(43fdc960) Jun 29 20:40:59.257750 Jun 29 20:41:01.222780 Jun 29 20:41:02.988102 Jun 29 20:41:03.238788 (XEN) 'd' pressed -> dumping registers Jun 29 20:41:03.253768 (XEN) Jun 29 20:41:03.253822 (XEN) *** Dumping CPU0 host state: *** Jun 29 20:41:03.253867 (XEN) ----[ Xen-4.19-unstable arm32 debug=y N Jun 29 20:41:03.256246 ot tainted ]---- Jun 29 20:41:03.265721 (XEN) CPU: 0 Jun 29 20:41:03.265773 (XEN) PC: 0025ef7c domain.c#idle_loop+0x130/0x1ac Jun 29 20:41:03.265822 (XEN) CPSR: 600e005a MODE:Hypervisor Jun 29 20:41:03.265866 (XEN) R0: 00000000 R1: 0029f300 R2: 00000000 R3: 00000000 Jun 29 20:41:03.277767 (XEN) R4: 00000000 R5: 002f80e0 R6: 0032b324 R7: 00000001 Jun 29 20:41:03.277827 (XEN) R8: 0032b104 R9: 00000000 R10:40e00000 R11:4003ff54 R12:fffffffc Jun 29 20:41:03.289675 (XEN) HYP: SP: 4003ff44 LR: 00225cb8 Jun 29 20:41:03.289675 (XEN) Jun 29 20:41:03.289675 (XEN) VTCR_EL2: 80003558 Jun 29 20:41:03.289675 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 29 20:41:03.301746 (XEN) Jun 29 20:41:03.301803 (XEN) SCTLR_EL2: 30cd187f Jun 29 20:41:03.301846 (XEN) HCR_EL2: 007c663f Jun 29 20:41:03.301886 (XEN) TTBR0_EL2: 0000000041107000 Jun 29 20:41:03.301928 (XEN) Jun 29 20:41:03.301965 (XEN) ESR_EL2: 07e00000 Jun 29 20:41:03.313678 (XEN) HPFAR_EL2: 00104810 Jun 29 20:41:03.313678 (XEN) HDFAR: e0807f00 Jun 29 20:41:03.313678 (XEN) HIFAR: c0d9e04c Jun 29 20:41:03.313678 (XEN) Jun 29 20:41:03.313678 (XEN) Xen stack trace from sp=4003ff44: Jun 29 20:41:03.325758 (XEN) 07e00000 00295014 002919b0 4003ff4c 00267818 00000000 00000000 00000000 Jun 29 20:41:03.325826 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 29 20:41:03.337764 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 29 20:41:03.337826 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 29 20:41:03.349753 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 29 20:41:03.361766 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 29 20:41:03.361826 (XEN) Xen call trace: Jun 29 20:41:03.361868 (XEN) [<0025ef7c>] domain.c#idle_loop+0x130/0x1ac (PC) Jun 29 20:41:03.373773 (XEN) [<00225cb8>] rcu_needs_cpu+0x40/0x60 (LR) Jun 29 20:41:03.373834 (XEN) [<00267818>] arch_get_xen_caps+0/0x90 Jun 29 20:41:03.373880 (XEN) Jun 29 20:41:03.385744 (XEN) *** Dumping CPU1 host state: *** Jun 29 20:41:03.385802 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Not tainted ]---- Jun 29 20:41:03.385851 (XEN) CPU: 1 Jun 29 20:41:03.385891 (XEN) PC: 0025ef7c domain.c#idle_loop+0x130/0x1ac Jun 29 20:41:03.397769 (XEN) CPSR: 6007005a MODE:Hypervisor Jun 29 20:41:03.397827 (XEN) R0: 00000000 R1: 0029f300 R2: 3fd0e000 R3: 00000000 Jun 29 20:41:03.409744 (XEN) R4: 00000001 R5: 002f80e0 R6: 0032b324 R7: 00000002 Jun 29 20:41:03.409805 (XEN) R8: 0032b104 R9: 00000001 R10:40e00000 R11:4000ff54 R12:fffffffc Jun 29 20:41:03.421736 (XEN) HYP: SP: 4000ff44 LR: 00225cb8 Jun 29 20:41:03.421794 (XEN) Jun 29 20:41:03.421833 (XEN) VTCR_EL2: 80003558 Jun 29 20:41:03.421899 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 29 20:41:03.421944 (XEN) Jun 29 20:41:03.421983 (XEN) SCTLR_EL2: 30cd187f Jun 29 20:41:03.433764 (XEN) HCR_EL2: 007c663f Jun 29 20:41:03.433820 (XEN) TTBR0_EL2: 00000000ba004000 Jun 29 20:41:03.433863 (XEN) Jun 29 20:41:03.433901 (XEN) ESR_EL2: 07e00000 Jun 29 20:41:03.433941 (XEN) HPFAR_EL2: 00104810 Jun 29 20:41:03.445742 (XEN) HDFAR: e0807f00 Jun 29 20:41:03.445797 (XEN) HIFAR: c0ac9320 Jun 29 20:41:03.445840 (XEN) Jun 29 20:41:03.445877 (XEN) Xen stack trace from sp=4000ff44: Jun 29 20:41:03.445920 (XEN) 07e00000 002f9290 00000001 4000ff3c 002680f4 00000000 00000000 00000000 Jun 29 20:41:03.457748 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 29 20:41:03.469752 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 29 20:41:03.469819 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 29 20:41:03.481755 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 29 20:41:03.481817 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 29 20:41:03.493758 (XEN) Xen call trace: Jun 29 20:41:03.493813 (XEN) [<0025ef7c>] domain.c#idle_loop+0x130/0x1ac (PC) Jun 29 20:41:03.493862 (XEN) [<00225cb8>] rcu_needs_cpu+0x40/0x60 (LR) Jun 29 20:41:03.505711 (XEN) [<002680f4>] start_secondary+0x204/0x20c Jun 29 20:41:03.505770 (XEN) Jun 29 20:41:03.505809 Jun 29 20:41:05.250076 (XEN) 'e' pressed -> dumping event-channel info Jun 29 20:41:05.273792 (XEN) Event channel information for domain 0: Jun 29 20:41:05.273852 (XEN) Polling vCPUs: {} Jun 29 20:41:05.273894 (XEN) port Jun 29 20:41:05.276190 [p/m/s] Jun 29 20:41:05.285711 (XEN) 1 [0/0/ - ]: s=3 n=1 x=0 d=0 p=4 Jun 29 20:41:05.285767 (XEN) 2 [0/0/ - ]: s=5 n=0 x=0 v=2 Jun 29 20:41:05.285814 (XEN) 3 [0/0/ - ]: s=5 n=1 x=0 v=3 Jun 29 20:41:05.297731 (XEN) 4 [0/0/ - ]: s=3 n=0 x=0 d=0 p=1 Jun 29 20:41:05.297791 Jun 29 20:41:07.254263 (XEN) gnttab_usage_print_all [ key 'g' pressed Jun 29 20:41:07.277804 (XEN) -------- active -------- -------- shared -------- Jun 29 20:41:07.277865 (XEN) [ref] localdo Jun 29 20:41:07.280184 m mfn pin localdom gmfn flags Jun 29 20:41:07.289716 (XEN) grant-table for remote d0 (v1) Jun 29 20:41:07.289772 (XEN) 1 frames (64 max), 0 maptrack frames (1024 max) Jun 29 20:41:07.301728 (XEN) no active grant table entries Jun 29 20:41:07.301786 (XEN) gnttab_usage_print_all ] done Jun 29 20:41:07.301830 Jun 29 20:41:09.249917 Jun 29 20:41:11.017911 Jun 29 20:41:11.257096 (XEN) Physical memory information: Jun 29 20:41:11.277809 (XEN) Xen heap: 65136kB free Jun 29 20:41:11.277846 (XEN) heap[19]: 523332kB free Jun 29 20:41:11.277893 (XEN) heap[20]: 966504kB f Jun 29 20:41:11.280246 ree Jun 29 20:41:11.289650 (XEN) Dom heap: 1489836kB free Jun 29 20:41:11.289704 Jun 29 20:41:13.255488 Jun 29 20:41:15.023181 Jun 29 20:41:15.272823 (XEN) sched_smt_power_savings: disabled Jun 29 20:41:15.297802 (XEN) NOW=424955812625 Jun 29 20:41:15.297857 (XEN) Online Cpus: 0-1 Jun 29 20:41:15.297899 (XEN) Cpupool 0: Jun 29 20:41:15.297938 (XEN) Cpus: 0-1 Jun 29 20:41:15.297976 (XEN) Schedu Jun 29 20:41:15.300230 ling granularity: cpu, 1 CPU per sched-resource Jun 29 20:41:15.309732 (XEN) Scheduler: SMP RTDS Scheduler (rtds) Jun 29 20:41:15.309788 (XEN) Global RunQueue info: Jun 29 20:41:15.309846 (XEN) Global DepletedQueue info: Jun 29 20:41:15.321804 (XEN) Global Replenishment Events info: Jun 29 20:41:15.321862 (XEN) Domain info: Jun 29 20:41:15.321903 (XEN) domain: 0 Jun 29 20:41:15.321943 (XEN) [ 0.0 ] cpu 0, (10000000, 4000000), cur_b=3867666 cur_d=424920000000 last_start=424913762125 Jun 29 20:41:15.333773 (XEN) priority_level=0 has_extratime=1 Jun 29 20:41:15.333831 (XEN) onQ=0 runnable=0 flags=10 effective hard_affinity=0-1 Jun 29 20:41:15.345770 (XEN) [ 0.1 ] cpu 1, (10000000, 4000000), cur_b=3910916 cur_d=424920000000 last_start=424913714375 Jun 29 20:41:15.345840 (XEN) priority_level=0 has_extratime=1 Jun 29 20:41:15.357717 (XEN) onQ=0 runnable=0 flags=10 effective hard_affinity=0-1 Jun 29 20:41:15.357778 (XEN) CPUs info: Jun 29 20:41:15.357819 (XEN) CPU[00] current=d[IDLE]v0, curr=d[IDLE]v0, prev=NULL Jun 29 20:41:15.369699 (XEN) CPU[00] Jun 29 20:41:15.369752 (XEN) CPU[01] current=d[IDLE]v1, curr=d[IDLE]v1, prev=NULL Jun 29 20:41:15.369799 (XEN) CPU[01] Jun 29 20:41:15.369838 Jun 29 20:41:17.276166 Jun 29 20:41:19.057420 Jun 29 20:41:19.302237 (XEN) Synced stime skew: max=83ns avg=83ns samples=1 current=83ns Jun 29 20:41:19.321789 (XEN) Synced cycles skew: max=1 avg=1 samples=1 current=1 Jun 29 20:41:19.321852 Jun 29 20:41:19.323886 Jun 29 20:41:21.302313 Jun 29 20:41:23.067153 Jun 29 20:41:23.310271 Jun 29 20:41:25.073637 Jun 29 20:41:25.318284 Jun 29 20:41:27.079368 Jun 29 20:41:37.322222 (XEN) 'q' pressed -> dumping domain info (now = 446993073125) Jun 29 20:41:37.337772 (XEN) General information for domain 0: Jun 29 20:41:37.337844 (XEN) refcnt=3 dying=0 pause Jun 29 20:41:37.340126 _count=0 Jun 29 20:41:37.349701 (XEN) nr_pages=131072 xenheap_pages=2 dirty_cpus={} max_pages=131072 Jun 29 20:41:37.349762 (XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=00000020 Jun 29 20:41:37.361753 (XEN) p2m mappings for domain 0 (vmid 1): Jun 29 20:41:37.361813 (XEN) 1G mappings: 0 (shattered 0) Jun 29 20:41:37.361858 (XEN) 2M mappings: 255 (shattered 1) Jun 29 20:41:37.373750 (XEN) 4K mappings: 944 Jun 29 20:41:37.373750 (XEN) Rangesets belonging to domain 0: Jun 29 20:41:37.373750 (XEN) Interrupts { 32-72, 74, 77-79, 82-84, 86, 88-100, 103-104, 107-110, 114, 116-120, 123, 126-128, 138, 144, 146-147, 149-151, 156 } Jun 29 20:41:37.385693 (XEN) I/O Memory { 2020-2050, 3810-3811, 3830-3831, 3860-3861, 10000-10001, 10010-10045, 10050-10055, 10060-10061, 101b0-101b1, 101d0-101d1, 101e0-101e1, 10440-10441, 10800-10801, 10830-10831, 10850-10851, 10a60-10a61, 10d10-10d11, 11000-11010, 11200-11201, 11210-11211, 11400-11401, 11800-11805, 11c00-11c01, 11c10-11c11, 11d40-11d41, 11f20-11f21, 12000-12010, 12100-12101, 12110-12111, 12120-12121, 12130-12131, 12170-12171, 121a0-121a1, 121b0-121b1, 121d0-121d1, 12200-12201, 12210-12211, 12220-12221, 12230-12231, 12250-12251, 122f0-122f1, 12c00-12c01, 12c10-12c11, 12c30-12c31, 12c60-12c61, 12c70-12c71, 12c80-12c81, 12c90-12c91, 12ca0-12ca1, 12cb0-12cb1, 12cc0-12cc1, 12cd0-12cd1, 12ce0-12ce1, 12d10-12d11, 12d20-12d21, 12d30-12d31, 12d40-12d41, 12d60-12d61, 12d70-12d71, 12dd0-12dd1, 13260-13261, 13270-13271, 13280-13281, 13290-13291, 132a0-132a1, 132b0-132b1, 132c0-132c1, 132d0-132d1, 132e0-132e1, 132f0-132f1, 13400-13401, 13c40-13c41, 13c50-13c51, 13e00-13e01, 13e10-13e11, 13e20-13e21, 13e30-13e31, 13e80-13e81, 13e90-13e91, 13ea0-13ea1, 13eb0-13eb1, 14400-14440, 14450-14460, 14500-14510, 14530-145a0, 145b0-145b1, 14640-14641, 14650-14651 } Jun 29 20:41:37.481821 (XEN) NODE affinity for domain 0: [0] Jun 29 20:41:37.493762 (XEN) VCPU information and callbacks for domain 0: Jun 29 20:41:37.493821 (XEN) UNIT0 affinities: hard={0-1} soft={0-1} Jun 29 20:41:37.493868 (XEN) VCPU0: CPU0 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Jun 29 20:41:37.505758 (XEN) pause_count=0 pause_flags=0 Jun 29 20:41:37.505815 (XEN) GICH_LRs (vcpu 0) mask=0 Jun 29 20:41:37.505858 (XEN) VCPU_LR[0]=0 Jun 29 20:41:37.517749 (XEN) VCPU_LR[1]=0 Jun 29 20:41:37.517803 (XEN) VCPU_LR[2]=0 Jun 29 20:41:37.517844 (XEN) VCPU_LR[3]=0 Jun 29 20:41:37.517884 (XEN) Inflight irq=27 lr=255 Jun 29 20:41:37.517925 (XEN) Pending irq=27 Jun 29 20:41:37.517965 (XEN) No periodic timer Jun 29 20:41:37.529759 (XEN) UNIT1 affinities: hard={0-1} soft={0-1} Jun 29 20:41:37.529818 (XEN) VCPU1: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Jun 29 20:41:37.541741 (XEN) pause_count=0 pause_flags=1 Jun 29 20:41:37.541799 (XEN) GICH_LRs (vcpu 1) mask=0 Jun 29 20:41:37.541843 (XEN) VCPU_LR[0]=0 Jun 29 20:41:37.541883 (XEN) VCPU_LR[1]=0 Jun 29 20:41:37.541922 (XEN) VCPU_LR[2]=0 Jun 29 20:41:37.553738 (XEN) VCPU_LR[3]=0 Jun 29 20:41:37.553738 (XEN) No periodic timer Jun 29 20:41:37.553738 (XEN) Notifying guest 0:0 (virq 1, port 0) Jun 29 20:41:37.553738 (XEN) Notifying guest 0:1 (virq 1, port 0) Jun 29 20:41:37.565685 Jun 29 20:41:49.322272 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 29 20:41:49.337747 Jun 29 20:41:49.337747 arndale-metrocentre login: Jun 29 20:41:49.339532 Jun 29 20:43:39.241664 Jun 29 20:43:39.241751 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 29 20:43:39.253734 Jun 29 20:43:39.253786 CPU: Exynos5250@1000MHz Jun 29 20:43:39.253829 Jun 29 20:43:39.253867 Board: Arndale Jun 29 20:43:39.253907 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 29 20:43:39.265684 ready Jun 29 20:43:39.265737 DRAM: 2 GiB Jun 29 20:43:39.265779 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 29 20:43:39.277714 trace: enabled Jun 29 20:43:39.313692 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 29 20:43:39.673690 i2c_init: failed to init bus 0 for speed = 100000 Jun 29 20:43:39.733736 In: serial Jun 29 20:43:39.733790 Out: serial Jun 29 20:43:39.733831 Err: serial Jun 29 20:43:39.733871 SCSI: ARNDALE SCSI INIT Jun 29 20:43:39.745718 Target spinup took 0 ms. Jun 29 20:43:39.745776 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 29 20:43:39.745825 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 29 20:43:39.757741 Net: Net Initialization Skipped Jun 29 20:43:39.757798 No ethernet found. Jun 29 20:43:39.757840 Hostname: arndale-metrocentre Jun 29 20:43:39.757882 Hit any key to stop autoboot: 2  1  0 Jun 29 20:43:41.685704 (Re)start USB... Jun 29 20:43:41.685767 USB0: USB EHCI 1.00 Jun 29 20:43:41.697700 scanning bus 0 for devices... 4 USB Device(s) found Jun 29 20:43:47.288632 scanning usb for storage devices... 0 Storage Device(s) found Jun 29 20:43:47.300523 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 29 20:43:47.736566 Waiting for Ethernet connection... done. Jun 29 20:43:49.336549 BOOTP broadcast 1 Jun 29 20:43:49.336549 BOOTP broadcast 2 Jun 29 20:43:50.900706 DHCP client bound to address 10.149.64.44 (1629 ms) Jun 29 20:43:50.912790 Using asx0 device Jun 29 20:43:50.912790 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 29 20:43:50.912790 Filename 'pxelinux.0'. Jun 29 20:43:50.912790 Load address: 0x43e00000 Jun 29 20:43:50.924701 Loading: *### Jun 29 20:43:50.936732 2.2 MiB/s Jun 29 20:43:50.936732 done Jun 29 20:43:50.936732 Bytes transferred = 42430 (a5be hex) Jun 29 20:43:50.936732 missing environment variable: pxeuuid Jun 29 20:43:50.948831 Retrieving file: pxelinux.cfg/0A95402C Jun 29 20:43:50.948933 Using asx0 device Jun 29 20:43:50.948977 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 29 20:43:50.949025 Filename 'pxelinux.cfg/0A95402C'. Jun 29 20:43:50.960776 Load address: 0x51000000 Jun 29 20:43:50.960832 Loading: *# Jun 29 20:43:50.960872 31.3 KiB/s Jun 29 20:43:50.960913 done Jun 29 20:43:50.960950 Bytes transferred = 65 (41 hex) Jun 29 20:43:50.960993 Config file found Jun 29 20:43:50.972733 Ignoring unknown command: serial Jun 29 20:43:50.972790 1: local Jun 29 20:43:50.972831 scanning bus for devices... Jun 29 20:43:50.972873 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 29 20:43:50.984741 Type: Hard Disk Jun 29 20:43:50.996766 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 29 20:43:50.996828 Found 1 device(s). Jun 29 20:43:50.996870 Jun 29 20:43:50.996908 SCSI device 0: Jun 29 20:43:50.996947 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 29 20:43:51.008748 Type: Hard Disk Jun 29 20:43:51.008805 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 29 20:43:51.008854 ... is now current device Jun 29 20:43:51.020659 Scanning scsi 0... Jun 29 20:43:51.020714 Found U-Boot script /boot.scr Jun 29 20:43:51.200548 1779 bytes read in 37 ms (46.9 KiB/s) Jun 29 20:43:51.236575 ## Executing script at 50000000 Jun 29 20:43:51.236575 Loading dtbs/6.10.0-rc5+/exynos5250-arndale.dtb Jun 29 20:43:51.248548 46641 bytes read in 1889 ms (23.4 KiB/s) Jun 29 20:43:53.080444 983052 bytes read in 120 ms (7.8 MiB/s) Jun 29 20:43:53.212536 Loaded xen-4.19-unstable to 0x41000000 (f000c) Jun 29 20:43:53.212536 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan sched=rtds Jun 29 20:43:53.224621 10785280 bytes read in 597 ms (17.2 MiB/s) Jun 29 20:43:53.824473 Loaded vmlinuz-6.10.0-rc5+ to 0x42000000 (a49200) Jun 29 20:43:53.836503 command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 29 20:43:53.848499 12142166 bytes read in 789 ms (14.7 MiB/s) Jun 29 20:43:54.629591 Loaded initrd.img-6.10.0-rc5+ to 0x43300000 (b94656) Jun 29 20:43:54.629660 chosen { Jun 29 20:43:54.641715 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan sched=rtds"; Jun 29 20:43:54.653245 #size-cells = <0x00000001>; Jun 29 20:43:54.653245 #address-cells = <0x00000001>; Jun 29 20:43:54.653245 stdout-path = "serial2:115200n8"; Jun 29 20:43:54.667726 module@1 { Jun 29 20:43:54.667726 reg = <0x43300000 0x00b94656>; Jun 29 20:43:54.667726 compatible = "xen,linux-initrd", "xen,multiboot-module"; Jun 29 20:43:54.667726 }; Jun 29 20:43:54.667726 module@0 { Jun 29 20:43:54.667726 bootargs = "ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Jun 29 20:43:54.691461 reg = <0x42000000 0x00a49200>; Jun 29 20:43:54.691461 compatible = "xen,linux-zimage", "xen,multiboot-module"; Jun 29 20:43:54.691461 }; Jun 29 20:43:54.691461 }; Jun 29 20:43:54.692879 Booting 0x41000000 - 0x43000000 Jun 29 20:43:54.704605 Kernel image @ 0x41000000 [ 0x000000 - 0x12f000 ] Jun 29 20:43:54.704605 ## Flattened Device Tree blob at 43000000 Jun 29 20:43:54.704605 Booting using the fdt blob at 0x43000000 Jun 29 20:43:54.713371 reserving fdt memory region: addr=43000000 size=c000 Jun 29 20:43:54.713430 Loading Device Tree to 4fff1000, end 4fffffff ... OK Jun 29 20:43:54.713478 Jun 29 20:43:54.726342 Starting kernel ...(fake run for tracing) Jun 29 20:43:54.726342 Jun 29 20:43:54.726342 Jun 29 20:43:54.726342 Starting kernel ... Jun 29 20:43:54.740526 Jun 29 20:43:54.740526 __ __ _ _ _ ___ _ _ _ Jun 29 20:43:54.788782 \ \/ /___ _ __ | || | / |/ _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Jun 29 20:43:54.788863 \ // _ \ '_ \ | || |_ | | (_) |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Jun 29 20:43:54.800719 / \ __/ | | | |__ _|| |\__, |__| |_| | | | \__ \ || (_| | |_) | | __/ Jun 29 20:43:54.800780 /_/\_\___|_| |_| |_|(_)_| /_/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Jun 29 20:43:54.809768 Jun 29 20:43:54.809822 (XEN) Xen version 4.19-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Sat Jun 29 18:19:56 UTC 2024 Jun 29 20:43:54.824714 (XEN) Latest ChangeSet: Wed Jun 26 16:07:30 2024 +0100 git:08f9b1dd9c Jun 29 20:43:54.824782 (XEN) build-id: b9392d5be22d35c0073ac9215c669f6e9fcfb743 Jun 29 20:43:54.836739 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Jun 29 20:43:54.836803 (XEN) 32-bit Execution: Jun 29 20:43:54.848671 (XEN) Processor Features: 00001031:00011011 Jun 29 20:43:54.848730 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Jun 29 20:43:54.848779 (XEN) Extensions: GenericTimer Security Jun 29 20:43:54.859034 (XEN) Debug Features: 02010555 Jun 29 20:43:54.859090 (XEN) Auxiliary Features: 00000000 Jun 29 20:43:54.859134 (XEN) Memory Model Features: 10201105 20000000 Jun 29 20:43:54.872704 (XEN) 01240000 02102211 Jun 29 20:43:54.872762 (XEN) ISA Features: 02101110 13112111 21232041 Jun 29 20:43:54.872808 (XEN) 11112131 10011142 00000000 Jun 29 20:43:54.884595 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Jun 29 20:43:54.896604 (XEN) Set SYSRAM to 0000000041000074 (00200074) Jun 29 20:43:54.896604 (XEN) SMP: Allowing 2 CPUs Jun 29 20:43:54.896604 (XEN) enabled workaround for: ARM erratum 766422 Jun 29 20:43:54.896604 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Jun 29 20:43:54.905813 (XEN) GICv2 initialization: Jun 29 20:43:54.905870 (XEN) gic_dist_addr=0000000010481000 Jun 29 20:43:54.905915 (XEN) gic_cpu_addr=0000000010482000 Jun 29 20:43:54.917815 (XEN) gic_hyp_addr=0000000010484000 Jun 29 20:43:54.917880 (XEN) gic_vcpu_addr=0000000010486000 Jun 29 20:43:54.917925 (XEN) gic_maintenance_irq=25 Jun 29 20:43:54.929816 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Jun 29 20:43:54.929876 (XEN) Using scheduler: SMP RTDS Scheduler (rtds) Jun 29 20:43:54.929922 (XEN) Initializing RTDS scheduler Jun 29 20:43:54.941796 (XEN) WARNING: This is experimental software in development. Jun 29 20:43:54.941858 (XEN) Use at your own risk. Jun 29 20:43:54.941900 (XEN) Allocated console ring of 16 KiB. Jun 29 20:43:54.953792 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Jun 29 20:43:54.953856 (XEN) CPU0: Guest atomics will try 1 times before pausing the domain Jun 29 20:43:54.965243 (XEN) Bringing up CPU1 Jun 29 20:43:54.965243 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Jun 29 20:43:54.977317 (XEN) Brought up 2 CPUs Jun 29 20:43:54.977372 (XEN) CPU 1 booted. Jun 29 20:43:54.977413 (XEN) I/O virtualisation disabled Jun 29 20:43:54.977456 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Jun 29 20:43:54.977501 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Jun 29 20:43:54.989808 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Jun 29 20:43:54.989869 (XEN) Initializing RTDS scheduler Jun 29 20:43:54.989913 (XEN) WARNING: This is experimental software in development. Jun 29 20:43:55.001799 (XEN) Use at your own risk. Jun 29 20:43:55.001855 (XEN) common/sched/rt.c:745: RTDS: timer initialized on cpu 0 Jun 29 20:43:55.013790 (XEN) alternatives: Patching with alt table 002c2f84 -> 002c305c Jun 29 20:43:55.013854 (XEN) CPU0 will execute ICIALLU on guest exit Jun 29 20:43:55.013900 (XEN) CPU1 will execute ICIALLU on guest exit Jun 29 20:43:55.025801 (XEN) *** LOADING DOMAIN 0 *** Jun 29 20:43:55.025857 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Jun 29 20:43:55.025936 (XEN) Loading ramdisk from boot module @ 0000000043300000 Jun 29 20:43:55.037794 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Jun 29 20:43:55.037863 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Jun 29 20:43:55.632802 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Jun 29 20:43:55.632802 (XEN) Allocating PPI 16 for event channel interrupt Jun 29 20:43:55.665247 (XEN) d0: extended regions not supported for 32-bit guests Jun 29 20:43:55.665247 (XEN) Loading zImage from 0000000042000000 to 0000000067400000-0000000067e49200 Jun 29 20:43:55.681145 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d94656 Jun 29 20:43:55.773829 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b499 Jun 29 20:43:55.872650 (XEN) Initial low memory virq threshold set at 0x4000 pages. Jun 29 20:43:55.872650 (XEN) Scrubbing Free RAM in background Jun 29 20:43:55.884607 (XEN) Std. Loglevel: All Jun 29 20:43:55.884607 (XEN) Guest Loglevel: All Jun 29 20:43:55.884607 (XEN) *************************************************** Jun 29 20:43:55.896598 (XEN) WARNING: SILO mode is not enabled. Jun 29 20:43:55.896598 (XEN) It has implications on the security of the system, Jun 29 20:43:55.896598 (XEN) unless the communications have been forbidden between Jun 29 20:43:55.908594 (XEN) untrusted domains. Jun 29 20:43:55.908746 (XEN) *************************************************** Jun 29 20:43:55.921256 (XEN) 3... 2... 1... Jun 29 20:43:58.908639 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 29 20:43:58.924588 (XEN) Freed 352kB init memory. Jun 29 20:43:58.924588 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Jun 29 20:44:00.056546 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Jun 29 20:44:00.080595 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Jun 29 20:44:00.080595 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Jun 29 20:44:00.092598 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Jun 29 20:44:00.092598 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 20:44:00.104545 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 29 20:44:00.140586 [ 0.000000] Linux version 6.10.0-rc5+ (osstest@himrod2) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Sat Jun 29 17:14:33 UTC 2024 Jun 29 20:44:00.152594 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 29 20:44:00.164703 [ 0.000000] CPU: div instructions available: patching division code Jun 29 20:44:00.176596 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 29 20:44:00.176596 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 29 20:44:00.188591 [ 0.000000] Memory policy: Data cache writealloc Jun 29 20:44:00.188591 [ 0.000000] Xen 4.19 support found Jun 29 20:44:00.200599 [ 0.000000] efi: UEFI not found. Jun 29 20:44:00.200599 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 on node -1 Jun 29 20:44:00.200599 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 29 20:44:00.212600 [ 0.000000] Zone ranges: Jun 29 20:44:00.212600 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Jun 29 20:44:00.212600 [ 0.000000] Normal empty Jun 29 20:44:00.224596 [ 0.000000] HighMem empty Jun 29 20:44:00.224596 [ 0.000000] Movable zone start for each node Jun 29 20:44:00.224596 [ 0.000000] Early memory node ranges Jun 29 20:44:00.224596 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Jun 29 20:44:00.236600 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Jun 29 20:44:00.248597 [ 0.000000] psci: probing for conduit method from DT. Jun 29 20:44:00.248597 [ 0.000000] psci: PSCIv1.1 detected in firmware. Jun 29 20:44:00.248597 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Jun 29 20:44:00.260577 [ 0.000000] psci: Trusted OS migration not required Jun 29 20:44:00.260577 [ 0.000000] psci: SMC Calling Convention v1.2 Jun 29 20:44:00.272648 [ 0.000000] percpu: Embedded 18 pages/cpu s41428 r8192 d24108 u73728 Jun 29 20:44:00.272785 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 29 20:44:00.296601 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 29 20:44:00.296601 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Jun 29 20:44:00.308608 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 131072 Jun 29 20:44:00.320612 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Jun 29 20:44:00.320612 [ 0.000000] Memory: 414600K/524288K available (15360K kernel code, 2268K rwdata, 6084K rodata, 2048K init, 439K bss, 44152K reserved, 65536K cma-reserved, 0K highmem) Jun 29 20:44:00.332598 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 29 20:44:00.344601 [ 0.000000] trace event string verifier disabled Jun 29 20:44:00.344601 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 29 20:44:00.356602 [ 0.000000] rcu: RCU event tracing is enabled. Jun 29 20:44:00.356602 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Jun 29 20:44:00.368595 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Jun 29 20:44:00.368595 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 29 20:44:00.380619 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 29 20:44:00.380619 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 29 20:44:00.392736 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 29 20:44:00.392806 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Jun 29 20:44:00.404606 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 29 20:44:00.416719 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 29 20:44:00.416803 [ 0.000013] Switching to timer-based delay loop, resolution 41ns Jun 29 20:44:00.428752 [ 0.000511] Console: colour dummy device 80x30 Jun 29 20:44:00.428815 [ 0.000529] printk: legacy console [hvc0] enabled Jun 29 20:44:00.440743 [ 0.299528] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Jun 29 20:44:00.452743 [ 0.309926] CPU: Testing write buffer coherency: ok Jun 29 20:44:00.452851 [ 0.314867] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 29 20:44:00.464803 [ 0.324421] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 29 20:44:00.464865 [ 0.330845] pid_max: default: 32768 minimum: 301 Jun 29 20:44:00.476750 [ 0.335621] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 29 20:44:00.476858 [ 0.342902] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 29 20:44:00.488802 [ 0.351315] /cpus/cpu@0 missing clock-frequency property Jun 29 20:44:00.488864 [ 0.356105] /cpus/cpu@1 missing clock-frequency property Jun 29 20:44:00.500753 [ 0.361509] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 29 20:44:00.500859 [ 0.368226] xen:grant_table: Grant tables using version 1 layout Jun 29 20:44:00.512806 [ 0.373353] Grant table initialized Jun 29 20:44:00.512818 [ 0.376906] xen:events: Using FIFO-based ABI Jun 29 20:44:00.524568 [ 0.381208] Xen: initializing cpu0 Jun 29 20:44:00.524568 [ 0.384732] Setting up static identity map for 0x60300000 - 0x603000ac Jun 29 20:44:00.524568 [ 0.392509] rcu: Hierarchical SRCU implementation. Jun 29 20:44:00.536602 [ 0.396125] rcu: Max phase no-delay instances is 1000. Jun 29 20:44:00.536602 [ 0.404373] EFI services will not be available. Jun 29 20:44:00.548571 [ 0.407695] smp: Bringing up secondary CPUs ... Jun 29 20:44:00.548571 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 29 20:44:00.620597 [ 0.482974] Xen: initializing cpu1 Jun 29 20:44:00.620597 [ 0.483140] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 29 20:44:00.632600 [ 0.483163] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 29 20:44:00.644599 [ 0.502106] smp: Brought up 1 node, 2 CPUs Jun 29 20:44:00.644599 [ 0.505771] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 29 20:44:00.644793 [ 0.512058] CPU: All CPU(s) started in SVC mode. Jun 29 20:44:00.656576 [ 0.517963] devtmpfs: initialized Jun 29 20:44:00.656576 [ 0.530467] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 29 20:44:00.680618 [ 0.537027] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Jun 29 20:44:00.680618 [ 0.546695] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 29 20:44:00.692590 [ 0.554605] pinctrl core: initialized pinctrl subsystem Jun 29 20:44:00.692590 [ 0.561271] DMI not present or invalid. Jun 29 20:44:00.704602 [ 0.564789] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 29 20:44:00.704602 [ 0.571409] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 29 20:44:00.716601 [ 0.580808] thermal_sys: Registered thermal governor 'step_wise' Jun 29 20:44:00.728597 [ 0.580966] software IO TLB: area num 2. Jun 29 20:44:00.728597 [ 0.589655] software IO TLB: only able to allocate 8 MB Jun 29 20:44:00.728597 [ 0.596730] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Jun 29 20:44:00.740598 [ 0.601927] No ATAGs? Jun 29 20:44:00.740598 [ 0.604250] hw-breakpoint: Failed to enable monitor mode on CPU 0. Jun 29 20:44:00.752536 [ 0.612972] Serial: AMBA PL011 UART driver Jun 29 20:44:00.752536 [ 0.659678] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 65 Jun 29 20:44:00.800580 [ 0.688122] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 29 20:44:00.836548 [ 0.712146] xen:balloon: Initialising balloon driver Jun 29 20:44:00.848551 [ 0.718607] iommu: Default domain type: Translated Jun 29 20:44:00.860594 [ 0.722025] iommu: DMA domain TLB invalidation policy: strict mode Jun 29 20:44:00.872541 [ 0.730820] SCSI subsystem initialized Jun 29 20:44:00.872541 [ 0.733574] usbcore: registered new interface driver usbfs Jun 29 20:44:00.872541 [ 0.738821] usbcore: registered new interface driver hub Jun 29 20:44:00.884600 [ 0.744184] usbcore: registered new device driver usb Jun 29 20:44:00.884600 [ 0.750873] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 29 20:44:00.896594 [ 0.754466] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 29 20:44:00.896594 [ 0.760740] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 29 20:44:00.908604 [ 0.765802] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 29 20:44:00.908762 [ 0.770728] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 29 20:44:00.927259 [ 0.776756] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 29 20:44:00.927342 [ 0.782547] pps_core: LinuxPPS API ver. 1 registered Jun 29 20:44:00.927409 [ 0.786924] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 29 20:44:00.932597 [ 0.796152] PTP clock support registered Jun 29 20:44:00.932597 [ 0.800383] EDAC MC: Ver: 3.0.0 Jun 29 20:44:00.944594 [ 0.803643] scmi_core: SCMI protocol bus registered Jun 29 20:44:00.944594 [ 0.810328] vgaarb: loaded Jun 29 20:44:00.944594 [ 0.813902] clocksource: Switched to clocksource arch_sys_counter Jun 29 20:44:00.956566 [ 0.830125] NET: Registered PF_INET protocol family Jun 29 20:44:00.971982 [ 0.833769] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Jun 29 20:44:00.984608 [ 0.841692] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 29 20:44:00.984608 [ 0.849383] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 29 20:44:00.996597 [ 0.857173] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Jun 29 20:44:01.008599 [ 0.865007] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Jun 29 20:44:01.008599 [ 0.872282] TCP: Hash tables configured (established 4096 bind 4096) Jun 29 20:44:01.020605 [ 0.878656] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 29 20:44:01.020605 [ 0.885225] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 29 20:44:01.032596 [ 0.892321] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 29 20:44:01.032596 [ 0.898486] RPC: Registered named UNIX socket transport module. Jun 29 20:44:01.044600 [ 0.903965] RPC: Registered udp transport module. Jun 29 20:44:01.044600 [ 0.908714] RPC: Registered tcp transport module. Jun 29 20:44:01.056604 [ 0.913487] RPC: Registered tcp-with-tls transport module. Jun 29 20:44:01.056604 [ 0.919060] RPC: Registered tcp NFSv4.1 backchannel transport module. Jun 29 20:44:01.068600 [ 0.925573] PCI: CLS 0 bytes, default 64 Jun 29 20:44:01.068600 [ 0.931009] Initialise system trusted keyrings Jun 29 20:44:01.068600 [ 0.934321] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Jun 29 20:44:01.080595 [ 0.940848] squashfs: version 4.0 (2009/01/31) Phillip Lougher Jun 29 20:44:01.080595 [ 0.946718] NFS: Registering the id_resolver key type Jun 29 20:44:01.092605 [ 0.951639] Key type id_resolver registered Jun 29 20:44:01.092605 [ 0.955902] Key type id_legacy registered Jun 29 20:44:01.092605 [ 0.959977] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Jun 29 20:44:01.104611 [ 0.966738] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Jun 29 20:44:01.116536 [ 0.974511] Trying to unpack rootfs image as initramfs... Jun 29 20:44:01.116536 [ 0.997630] Key type asymmetric registered Jun 29 20:44:01.140594 [ 1.000365] Asymmetric key parser 'x509' registered Jun 29 20:44:01.140594 [ 1.005429] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) Jun 29 20:44:01.152604 [ 1.012778] io scheduler mq-deadline registered Jun 29 20:44:01.152604 [ 1.017410] io scheduler kyber registered Jun 29 20:44:01.164512 [ 1.021486] io scheduler bfq registered Jun 29 20:44:01.164512 [ 1.163512] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 29 20:44:01.308627 [ 1.169764] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 29 20:44:01.320537 [ 1.217007] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 29 20:44:01.356579 [ 1.223224] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 29 20:44:01.368583 [ 1.258838] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 29 20:44:01.404601 [ 1.265092] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 29 20:44:01.416557 [ 1.305426] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 29 20:44:01.452601 [ 1.311634] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 29 20:44:01.464588 [ 1.324044] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 29 20:44:01.464588 [ 1.390566] xen:xen_evtchn: Event-channel device installed Jun 29 20:44:01.536545 [ 1.465420] Freeing initrd memory: 11860K Jun 29 20:44:01.608567 [ 1.514829] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 29 20:44:01.656559 [ 1.525884] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 29 20:44:01.668607 [ 1.534132] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 29 20:44:01.680581 [ 1.542962] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 29 20:44:01.692598 [ 1.551999] SuperH (H)SCI(F) driver initialized Jun 29 20:44:01.692598 [ 1.556315] STMicroelectronics ASC driver initialized Jun 29 20:44:01.704604 [ 1.561162] STM32 USART driver initialized Jun 29 20:44:01.704604 [ 1.566603] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 29 20:44:01.704604 [ 1.575386] random: crng init done Jun 29 20:44:01.716584 [ 1.583118] brd: module loaded Jun 29 20:44:01.728439 [ 1.589098] loop: module loaded Jun 29 20:44:01.728439 [ 1.604766] Invalid max_queues (4), will use default max: 2. Jun 29 20:44:01.744488 [ 1.623521] tun: Universal TUN/TAP device driver, 1.6 Jun 29 20:44:01.768610 [ 1.627401] CAN device driver interface Jun 29 20:44:01.768610 [ 1.632513] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Jun 29 20:44:01.780590 [ 1.643774] xen_netfront: Initialising Xen virtual ethernet driver Jun 29 20:44:01.792624 [ 1.648643] pegasus: Pegasus/Pegasus II USB Ethernet driver Jun 29 20:44:01.792624 [ 1.654280] usbcore: registered new interface driver pegasus Jun 29 20:44:01.792624 [ 1.659969] usbcore: registered new interface driver asix Jun 29 20:44:01.804610 [ 1.665465] usbcore: registered new interface driver ax88179_178a Jun 29 20:44:01.804610 [ 1.671599] usbcore: registered new interface driver cdc_ether Jun 29 20:44:01.816623 [ 1.677517] usbcore: registered new interface driver smsc75xx Jun 29 20:44:01.816623 [ 1.683320] usbcore: registered new interface driver smsc95xx Jun 29 20:44:01.828604 [ 1.689151] usbcore: registered new interface driver net1080 Jun 29 20:44:01.828604 [ 1.694879] usbcore: registered new interface driver cdc_subset Jun 29 20:44:01.840750 [ 1.700862] usbcore: registered new interface driver zaurus Jun 29 20:44:01.840817 [ 1.706508] usbcore: registered new interface driver cdc_ncm Jun 29 20:44:01.849757 [ 1.715919] usbcore: registered new interface driver usb-storage Jun 29 20:44:01.861667 [ 1.726522] i2c_dev: i2c /dev entries driver Jun 29 20:44:01.861723 [ 1.745052] device-mapper: uevent: version 1.0.3 Jun 29 20:44:01.885766 [ 1.748477] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev Jun 29 20:44:01.897244 [ 1.758074] cpu cpu0: OPP table can't be empty Jun 29 20:44:01.897244 [ 1.762812] failed to register cpuidle driver Jun 29 20:44:01.897248 [ 1.766195] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Jun 29 20:44:01.911339 [ 1.774608] sdhci: Secure Digital Host Controller Interface driver Jun 29 20:44:01.911339 [ 1.779543] sdhci: Copyright(c) Pierre Ossman Jun 29 20:44:01.927303 [ 1.787669] sdhci-pltfm: SDHCI platform and OF driver helper Jun 29 20:44:01.927303 [ 1.796007] ledtrig-cpu: registered to indicate activity on CPUs Jun 29 20:44:01.937245 [ 1.801476] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Jun 29 20:44:01.949758 [ 1.808180] usbcore: registered new interface driver usbhid Jun 29 20:44:01.949819 [ 1.812789] usbhid: USB HID core driver Jun 29 20:44:01.949865 [ 1.823799] NET: Registered PF_INET6 protocol family Jun 29 20:44:01.961752 [ 1.828334] Segment Routing with IPv6 Jun 29 20:44:01.961810 [ 1.831158] In-situ OAM (IOAM) with IPv6 Jun 29 20:44:01.976247 [ 1.835246] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Jun 29 20:44:01.976247 [ 1.841590] NET: Registered PF_PACKET protocol family Jun 29 20:44:01.985776 [ 1.846282] can: controller area network core Jun 29 20:44:01.985836 [ 1.850702] NET: Registered PF_CAN protocol family Jun 29 20:44:01.985905 [ 1.855525] can: raw protocol Jun 29 20:44:01.997244 [ 1.858554] can: broadcast manager protocol Jun 29 20:44:01.997244 [ 1.862810] can: netlink gateway - max_hops=1 Jun 29 20:44:02.009245 [ 1.867600] Key type dns_resolver registered Jun 29 20:44:02.009245 [ 1.872258] ThumbEE CPU extension supported. Jun 29 20:44:02.009245 [ 1.875959] Registering SWP/SWPB emulation handler Jun 29 20:44:02.021728 [ 1.890317] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level Jun 29 20:44:02.035947 [ 1.897217] Loading compiled-in X.509 certificates Jun 29 20:44:02.035947 [ 1.940492] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 29 20:44:02.082314 [ 1.944159] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 29 20:44:02.082314 [ 1.951204] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 29 20:44:02.096737 [ 1.958898] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 29 20:44:02.108742 [ 2.007573] s5m-rtc s5m-rtc: registered as rtc0 Jun 29 20:44:02.144734 [ 2.016453] s5m-rtc s5m-rtc: setting system clock to 2000-01-02T00:00:24 UTC (946771224) Jun 29 20:44:02.156780 [ 2.027504] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 29 20:44:02.168772 [ 2.032120] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 29 20:44:02.180709 [ 2.036538] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 29 20:44:02.180709 [ 2.043288] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 29 20:44:02.180709 [ 2.049155] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 29 20:44:02.192787 [ 2.055410] clk: Not disabling unused clocks Jun 29 20:44:02.192851 [ 2.058826] PM: genpd: Disabling unused power domains Jun 29 20:44:02.204768 [ 2.067335] Freeing unused kernel image (initmem) memory: 2048K Jun 29 20:44:02.204831 [ 2.073629] Run /init as init process Jun 29 20:44:02.216729 Loading, please wait... Jun 29 20:44:02.240718 Starting systemd-udevd version 252.26-1~deb12u2 Jun 29 20:44:02.312730 [ 3.362318] i2c-gpio i2c-10: using lines 552 (SDA) and 553 (SCL) Jun 29 20:44:03.504654 [ 3.437412] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 29 20:44:03.588571 [ 3.444595] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 29 20:44:03.588571 [ 3.454082] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 29 20:44:03.600550 [ 3.518263] Synopsys Designware Multimedia Card Interface Driver Jun 29 20:44:03.660541 [ 3.540771] phy phy-12130000.phy.8: phy_power_on was called before phy_init Jun 29 20:44:03.684571 [ 3.546686] exynos-ohci 12120000.usb: USB Host Controller Jun 29 20:44:03.684571 [ 3.552170] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Jun 29 20:44:03.696507 [ 3.577427] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 29 20:44:03.720540 [ 3.583601] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 Jun 29 20:44:03.732536 [ 3.589707] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 29 20:44:03.732536 [ 3.596089] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 29 20:44:03.744553 [ 3.602478] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 29 20:44:03.744553 [ 3.608054] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo Jun 29 20:44:03.756544 [ 3.619979] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 29 20:44:03.772570 [ 3.625103] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 29 20:44:03.772772 [ 3.630635] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 127,32 bit host data width,128 deep fifo Jun 29 20:44:03.772817 [ 3.640454] mmc_host mmc0: card is polling. Jun 29 20:44:03.784611 [ 3.645657] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 29 20:44:03.784611 [ 3.651952] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 29 20:44:03.796606 [ 3.657114] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 29 20:44:03.808604 [ 3.659584] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 29 20:44:03.820604 [ 3.674357] hub 1-0:1.0: USB hub found Jun 29 20:44:03.820604 [ 3.680232] hub 1-0:1.0: 3 ports detected Jun 29 20:44:03.820604 [ 3.686266] s2mps11-clk s5m8767-clk: DMA mask not set Jun 29 20:44:03.832537 [ 3.702979] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Jun 29 20:44:03.844572 [ 3.713124] s3c-rtc 101e0000.rtc: registered as rtc1 Jun 29 20:44:03.856610 [ 3.717125] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 29 20:44:03.856610 [ 3.723848] ahci-dwc 122f0000.sata: AHCI vers 0001.0300, 32 command slots, 6 Gbps, platform mode Jun 29 20:44:03.868607 [ 3.732698] ahci-dwc 122f0000.sata: 1/1 ports implemented (port mask 0x1) Jun 29 20:44:03.880621 [ 3.739847] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 29 20:44:03.892545 [ 3.758912] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 29 20:44:03.904606 [ 3.767735] VDD_ALIVE_1.0V: Bringing 1000000uV into 1100000-1100000uV Jun 29 20:44:03.916539 [ 3.838257] phy phy-12130000.phy.8: phy_power_on was called before phy_init Jun 29 20:44:03.976581 [ 3.843921] exynos-ehci 12110000.usb: EHCI Host Controller Jun 29 20:44:03.988620 [ 3.849464] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Jun 29 20:44:04.000590 [ 3.857377] scsi host0: ahci-dwc Jun 29 20:44:04.000590 [ 3.864074] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 Jun 29 20:44:04.012591 [ 3.868972] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 129 lpm-pol 0 Jun 29 20:44:04.012591 [ 3.906397] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 29 20:44:04.048588 [ 3.927857] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 29 20:44:04.072602 [ 3.933470] hub 2-0:1.0: USB hub found Jun 29 20:44:04.072602 [ 3.936420] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 29 20:44:04.084538 [ 3.948440] hub 2-0:1.0: 3 ports detected Jun 29 20:44:04.084538 [ 3.951150] mmc0: new DDR MMC card at address 0001 Jun 29 20:44:04.096529 [ 3.964839] mmc1: new high speed SDHC card at address aaaa Jun 29 20:44:04.108590 [ 3.969663] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Jun 29 20:44:04.108590 [ 3.974532] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Jun 29 20:44:04.120541 [ 3.984452] mmcblk0: p1 p2 p3 p4 Jun 29 20:44:04.120541 [ 3.993244] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Jun 29 20:44:04.132573 [ 4.007070] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Jun 29 20:44:04.144551 [ 4.020904] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Jun 29 20:44:04.168631 [ 4.394022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 29 20:44:04.540631 [ 4.399794] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 29 20:44:04.540631 [ 4.405685] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 29 20:44:04.552734 [ 4.413296] ata1.00: configured for UDMA/133 Jun 29 20:44:04.552799 [ 4.416901] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 29 20:44:04.564690 [ 4.426223] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 29 20:44:04.576620 [ 4.432363] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 29 20:44:04.576620 [ 4.437726] sd 0:0:0:0: [sda] Write Protect is off Jun 29 20:44:04.576620 [ 4.442650] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 29 20:44:04.588673 [ 4.451766] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 29 20:44:04.600545 [ 4.475755] sda: sda1 sda2 < sda5 > Jun 29 20:44:04.612567 [ 4.478515] sd 0:0:0:0: [sda] Attached SCSI disk Jun 29 20:44:04.624544 [ 4.516295] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Jun 29 20:44:04.660602 [ 4.524252] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 29 20:44:04.672708 [ 4.528586] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 29 20:44:04.672784 [ 4.583635] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002000010 Jun 29 20:44:04.732590 [ 4.595279] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Jun 29 20:44:04.732590 [ 4.600166] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 29 20:44:04.744611 [ 4.605575] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 29 20:44:04.756728 [ 4.613212] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 29 20:44:04.756792 [ 4.622981] hub 3-0:1.0: USB hub found Jun 29 20:44:04.768723 [ 4.628432] hub 3-0:1.0: 1 port detected Jun 29 20:44:04.768782 [ 4.633268] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 29 20:44:04.780761 [ 4.642307] hub 4-0:1.0: USB hub found Jun 29 20:44:04.780820 [ 4.645376] hub 4-0:1.0: 1 port detected Jun 29 20:44:04.792538 [ 4.928172] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 29 20:44:05.080535 [ 5.102810] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 29 20:44:05.248572 [ 5.241105] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 29 20:44:05.392534 [ 5.349342] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 29 20:44:05.500537 [ 5.457595] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 29 20:44:05.608533 [ 5.565855] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 29 20:44:05.716497 [ 5.905219] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 29 20:44:06.052705 [ 6.073453] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 29 20:44:06.220590 [ 6.187850] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 29 20:44:06.325769 [ 6.295601] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 29 20:44:06.433771 [ 6.403321] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 29 20:44:06.541802 [ 6.511087] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 29 20:44:06.649775 [ 6.518709] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 29 20:44:06.661754 Begin: Loading essential drivers ... done. Jun 29 20:44:06.709700 Begin: Running /scripts/init-premount ... done. Jun 29 20:44:09.724621 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 29 20:44:09.736593 Begin: Running /scripts/local-premount ... done. Jun 29 20:44:09.736593 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 29 20:44:09.796688 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 29 20:44:09.904622 /dev/mapper/arndale--metrocentre--vg-root: recovering journal Jun 29 20:44:10.156776 /dev/mapper/arndale--metrocentre--vg-root: clean, 46077/1220608 files, 606086/4882432 blocks Jun 29 20:44:11.188814 done. Jun 29 20:44:11.200728 [ 11.072000] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 29 20:44:11.212788 [ 11.439405] EXT4-fs (dm-0): mounted filesystem c58c01de-2a0d-467e-9a9b-d5bdb747cef1 ro with ordered data mode. Quota mode: disabled. Jun 29 20:44:11.584882 done. Jun 29 20:44:11.585671 Begin: Running /scripts/local-bottom ... done. Jun 29 20:44:11.632788 Begin: Running /scripts/init-bottom ... done. Jun 29 20:44:11.680726 INIT: version 3.06 booting Jun 29 20:44:12.148768 INIT: No inittab.d directory found Jun 29 20:44:12.253591 Using makefile-style concurrent boot in runlevel S. Jun 29 20:44:12.517625 Starting hotplug events dispatcher: systemd-udevd. Jun 29 20:44:14.109647 Synthesizing the initial hotplug events (subsystems)...done. Jun 29 20:44:14.577608 Synthesizing the initial hotplug events (devices)...[ 14.743796] wm8994 3-001a: Device is not a WM8994, ID is 0 Jun 29 20:44:14.889627 [ 14.749587] wm8994 3-001a: probe with driver wm8994 failed with error -22 Jun 29 20:44:14.889627 done. Jun 29 20:44:15.477622 Waiting for /dev to be fully populated...[ 15.403508] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 29 20:44:15.549614 [ 15.429232] s5p-secss 10830000.sss: s5p-sss driver registered Jun 29 20:44:15.573646 [ 15.454141] mc: Linux media interface: v0.10 Jun 29 20:44:15.597726 [ 15.523417] videodev: Linux video capture interface: v2.00 Jun 29 20:44:15.669683 [ 15.738533] s5p-mfc 11000000.codec: Adding to iommu group 0 Jun 29 20:44:15.885689 [ 15.774277] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Jun 29 20:44:15.921709 [ 15.855411] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 29 20:44:16.005753 [ 15.864507] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 29 20:44:16.005824 [ 15.871951] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 29 20:44:16.017757 [ 15.884663] s5p-mfc 11000000.codec: decoder registered as /dev/video0 Jun 29 20:44:16.029751 [ 15.890046] s5p-mfc 11000000.codec: encoder registered as /dev/video1 Jun 29 20:44:16.029814 [ 15.979835] exynos-gsc 13e00000.gsc: Adding to iommu group 1 Jun 29 20:44:16.125714 [ 15.990809] exynos-gsc 13e10000.gsc: Adding to iommu group 2 Jun 29 20:44:16.137715 [ 16.017792] exynos-gsc 13e20000.gsc: Adding to iommu group 3 Jun 29 20:44:16.161734 [ 16.026696] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 29 20:44:16.173723 [ 16.044040] exynos-gsc 13e30000.gsc: Adding to iommu group 4 Jun 29 20:44:16.185738 [ 16.127003] usb3503 usb-hub: switched to HUB mode Jun 29 20:44:16.269765 [ 16.130395] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 29 20:44:16.269827 [ 16.193982] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 29 20:44:16.341705 [ 16.329899] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 29 20:44:16.473758 [ 16.440142] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 29 20:44:16.581772 [ 16.548417] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 29 20:44:16.689754 [ 16.564118] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Jun 29 20:44:16.713686 [ 16.604023] usb 2-3: new high-speed USB device number 2 using exynos-ehci Jun 29 20:44:16.749660 [ 16.662835] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 29 20:44:16.809685 [ 16.816263] hub 2-3:1.0: USB hub found Jun 29 20:44:16.953764 [ 16.819835] hub 2-3:1.0: 3 ports detected Jun 29 20:44:16.965684 [ 16.846418] I/O error, dev mmcblk1, sector 7743712 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 Jun 29 20:44:16.989753 [ 16.959260] I/O error, dev mmcblk1, sector 7743713 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 Jun 29 20:44:17.109685 [ 17.009863] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 29 20:44:17.157792 [ 17.017555] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 29 20:44:17.169676 [ 17.026317] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 29 20:44:17.169676 [ 17.037072] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 29 20:44:17.181796 [ 17.045932] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 29 20:44:17.193762 [ 17.054574] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 29 20:44:17.205722 [ 17.081441] I/O error, dev mmcblk1, sector 7743715 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 Jun 29 20:44:17.229705 [ 17.163949] usb 2-3.2: new high-speed USB device number 3 using exynos-ehci Jun 29 20:44:17.313586 [ 17.316532] hub 2-3.2:1.0: USB hub found Jun 29 20:44:17.457640 [ 17.319485] hub 2-3.2:1.0: 4 ports detected Jun 29 20:44:17.457662 [ 17.379292] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 29 20:44:17.529733 [ 17.388530] usbcore: registered new device driver onboard-usb-dev Jun 29 20:44:17.529795 [ 17.516697] hub 2-3.2:1.0: USB hub found Jun 29 20:44:17.661738 [ 17.519701] hub 2-3.2:1.0: 4 ports detected Jun 29 20:44:17.661797 [ 17.531911] hub 2-3.2:1.0: USB hub found Jun 29 20:44:17.673727 [ 17.534892] hub 2-3.2:1.0: 4 ports detected Jun 29 20:44:17.673785 [ 17.547619] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 29 20:44:17.697690 [ 17.669238] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 29 20:44:17.817708 [ 17.777028] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 29 20:44:17.925700 [ 17.853931] usb 2-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 29 20:44:17.997741 [ 17.884794] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 29 20:44:18.033698 [ 17.992517] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 29 20:44:18.141700 done. Jun 29 20:44:18.141751 [ 18.008847] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 29 20:44:18.153736 [ 18.420449] EXT4-fs (dm-0): re-mounted c58c01de-2a0d-467e-9a9b-d5bdb747cef1 r/w. Quota mode: disabled. Jun 29 20:44:18.561752 [ 18.735976] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 29 20:44:18.885749 [ 18.750342] Asix Electronics AX88772A usb-002:004:10: attached PHY driver (mii_bus:phy_addr=usb-002:004:10, irq=POLL) Jun 29 20:44:18.897756 [ 18.760330] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 92:9f:cd:88:43:8e Jun 29 20:44:18.909739 Checking file systems.../dev/sda1: recovering journal Jun 29 20:44:19.665675 /dev/sda1: clean, 2179/61056 files, 44464/243968 blocks Jun 29 20:44:19.737694 done. Jun 29 20:44:19.761686 Cleaning up temporary files... /tmp. Jun 29 20:44:19.905693 [ 19.943772] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 29 20:44:20.085750 [ 19.995703] EXT4-fs (sda1): mounted filesystem bfc2f879-87f2-4292-8d88-e51527b92b0d r/w with ordered data mode. Quota mode: disabled. Jun 29 20:44:20.145697 [ 20.096037] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k Jun 29 20:44:20.245709 Mounting local filesystems...done. Jun 29 20:44:20.493732 Activating swapfile swap, if any...done. Jun 29 20:44:20.493790 Cleaning up temporary files.... Jun 29 20:44:20.529697 Starting Setting kernel variables: sysctl. Jun 29 20:44:20.757679 [ 21.986116] xenbr0: port 1(eth0) entered blocking state Jun 29 20:44:22.126539 [ 21.990001] xenbr0: port 1(eth0) entered disabled state Jun 29 20:44:22.137802 [ 21.995342] asix 2-3.2.4:1.0 eth0: entered allmulticast mode Jun 29 20:44:22.137863 [ 22.001151] asix 2-3.2.4:1.0 eth0: entered promiscuous mode Jun 29 20:44:22.149771 [ 22.011999] asix 2-3.2.4:1.0 eth0: configuring for phy/internal link mode Jun 29 20:44:22.149836 Configuring network interfaces...RTNETLINK answers: Operation not supported Jun 29 20:44:24.009841 Jun 29 20:44:24.009900 Waiting for xenbr0 to get ready (MAXWAIT is 2 seconds). Jun 29 20:44:24.021723 [ 24.262380] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 29 20:44:24.405812 [ 24.268449] xenbr0: port 1(eth0) entered blocking state Jun 29 20:44:24.417712 [ 24.273619] xenbr0: port 1(eth0) entered forwarding state Jun 29 20:44:24.417774 done. Jun 29 20:44:24.657728 Cleaning up temporary files.... Jun 29 20:44:24.741747 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Jun 29 20:44:24.789777 Starting nftables: none Jun 29 20:44:24.849741 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Jun 29 20:44:24.909800 failed! Jun 29 20:44:24.909852 startpar: service(s) returned failure: nftables ... failed! Jun 29 20:44:24.921720 INIT: Entering runlevel: 2 Jun 29 20:44:24.933736 Using makefile-style concurrent boot in runlevel 2. Jun 29 20:44:24.945749 Starting Apache httpd web server: apache2AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.149.64.44. Set the 'ServerName' directive globally to suppress this message Jun 29 20:44:25.797737 . Jun 29 20:44:26.865684 Starting NTP server: ntpd2000-01-02T00:00:49 ntpd[1147]: INIT: ntpd ntpsec-1.2.2: Starting Jun 29 20:44:27.357752 2000-01-02T00:00:49 ntpd[1147]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 29 20:44:27.369740 . Jun 29 20:44:27.369795 Starting SMP IRQ Balancer: irqbalance. Jun 29 20:44:27.681732 Starting system message bus: dbus. Jun 29 20:44:27.945685 Starting OpenBSD Secure Shell server: sshd. Jun 29 20:44:28.665747 Starting /usr/local/sbin/oxenstored... Jun 29 20:44:30.668616 Setting domain 0 name, domid and JSON config... Jun 29 20:44:30.668616 Done setting up Dom0 Jun 29 20:44:30.668616 Starting xenconsoled... Jun 29 20:44:30.680576 Starting QEMU as disk backend for dom0 Jun 29 20:44:30.680576 Jun 29 20:44:31.785673 Debian GNU/Linux 12 arndale-metrocentre hvc0 Jun 29 20:44:31.797727 Jun 29 20:44:31.797734 arndale-metrocentre login: INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 20:46:10.813763 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 20:52:51.165740 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 20:59:32.513597 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 21:06:13.848458 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 21:12:54.201603 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 21:19:35.545700 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 21:26:16.885889 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 21:32:57.237752 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 21:39:38.588462 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 21:46:19.913820 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 21:53:01.265619 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 21:59:42.617598 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 22:06:22.964574 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 22:13:04.293757 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 22:19:45.625787 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 22:26:25.961678 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 22:33:07.300879 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 22:39:48.629667 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 22:46:28.977716 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 22:53:10.309758 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 22:59:51.657696 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 23:06:31.981723 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 23:13:13.317663 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 23:19:54.645854 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 23:26:34.992534 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 23:33:16.321627 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 23:39:57.669762 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 23:46:38.001829 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 29 23:53:19.333818 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 00:00:00.661855 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 00:06:41.004813 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 00:13:22.341545 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 00:20:03.657786 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 00:26:44.004696 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 00:33:25.349607 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 00:40:06.673866 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 00:46:47.021593 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 00:53:28.353745 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 01:00:09.673473 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 01:06:50.001742 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 01:13:31.328571 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 01:20:12.677796 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 01:26:53.025801 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 01:33:34.369823 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 01:40:15.728754 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 01:46:56.064823 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 01:53:37.405775 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 02:00:18.745735 [19313.301707] sd 0:0:0:0: [sda] Synchronizing SCSI cache Jun 30 02:05:53.241795 [19313.321172] wake enabled for irq 119 (gpx1-4) Jun 30 02:05:53.265638 [19313.324224] wake enabled for irq 120 (gpx1-5) Jun 30 02:05:53.265668 [19313.328597] wake enabled for irq 121 (gpx1-6) Jun 30 02:05:53.277660 [19313.333022] wake enabled for irq 122 (gpx1-7) Jun 30 02:05:53.277694 [19313.337490] wake enabled for irq 123 (gpx2-0) Jun 30 02:05:53.277720 [19313.341873] wake enabled for irq 124 (gpx2-1) Jun 30 02:05:53.289715 [19313.346739] reboot: Resô Jun 30 02:05:53.628583 Jun 30 02:05:53.628583 Jun 30 02:05:53.628583 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 02:05:53.628583 Jun 30 02:05:53.628583 CPU: Exynos5250@1000MHz Jun 30 02:05:53.628583 Jun 30 02:05:53.628583 Board: Arndale Jun 30 02:05:53.640599 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 02:05:53.640599 ready Jun 30 02:05:53.640599 DRAM: 2 GiB Jun 30 02:05:53.640599 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 02:05:53.668558 trace: enabled Jun 30 02:05:53.692541 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 02:05:54.052604 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 02:05:54.112599 In: serial Jun 30 02:05:54.112599 Out: serial Jun 30 02:05:54.112599 Err: serial Jun 30 02:05:54.124594 SCSI: ARNDALE SCSI INIT Jun 30 02:05:54.124594 Target spinup took 0 ms. Jun 30 02:05:54.124594 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 02:05:54.136609 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 02:05:54.136609 Net: Net Initialization Skipped Jun 30 02:05:54.136609 No ethernet found. Jun 30 02:05:54.136609 Hostname: arndale-metrocentre Jun 30 02:05:54.148581 Hit any key to stop autoboot: 2  1  0 Jun 30 02:05:56.065879 (Re)start USB... Jun 30 02:05:56.065879 USB0: USB EHCI 1.00 Jun 30 02:05:56.080565 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 02:06:01.673794 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 02:06:01.673880 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 02:06:02.117819 Waiting for Ethernet connection... unable to connect. Jun 30 02:06:06.957748 missing environment variable: pxeuuid Jun 30 02:06:06.969827 missing environment variable: bootfile Jun 30 02:06:06.969859 Retrieving file: pxelinux.cfg/00000000 Jun 30 02:06:06.969884 Waiting for Ethernet connection... done. Jun 30 02:06:10.605814 *** ERROR: `serverip' not set Jun 30 02:06:10.605900 missing environment variable: bootfile Jun 30 02:06:10.605945 Retrieving file: pxelinux.cfg/0000000 Jun 30 02:06:10.617851 Waiting for Ethernet connection... unable to connect. Jun 30 02:06:15.449871 missing environment variable: bootfile Jun 30 02:06:15.461884 Retrieving file: pxelinux.cfg/000000 Jun 30 02:06:15.461942 Waiting for Ethernet connection... unable to connect. Jun 30 02:06:20.297603 missing environment variable: bootfile Jun 30 02:06:20.297603 Retrieving file: pxelinux.cfg/00000 Jun 30 02:06:20.309619 Waiting for Ethernet connection... unable to connect. Jun 30 02:06:25.145731 missing environment variable: bootfile Jun 30 02:06:25.145782 Retrieving file: pxelinux.cfg/0000 Jun 30 02:06:25.157654 Waiting for Ethernet connection... unable to connect. Jun 30 02:06:29.996775 missing environment variable: bootfile Jun 30 02:06:29.996850 Retrieving file: pxelinux.cfg/000 Jun 30 02:06:29.996895 Waiting for Ethernet connection... unable to connect. Jun 30 02:06:34.833804 missing environment variable: bootfile Jun 30 02:06:34.845729 Retrieving file: pxelinux.cfg/00 Jun 30 02:06:34.845782 Waiting for Ethernet connection... unable to connect. Jun 30 02:06:39.689748 missing environment variable: bootfile Jun 30 02:06:39.689816 Retrieving file: pxelinux.cfg/0 Jun 30 02:06:39.689861 Waiting for Ethernet connection... unable to connect. Jun 30 02:06:44.537780 missing environment variable: bootfile Jun 30 02:06:44.537848 Retrieving file: pxelinux.cfg/default-arm-exynos Jun 30 02:06:44.537896 Waiting for Ethernet connection... unable to connect. Jun 30 02:06:49.381670 missing environment variable: bootfile Jun 30 02:06:49.381692 Retrieving file: pxelinux.cfg/default-arm Jun 30 02:06:49.393609 Waiting for Ethernet connection... unable to connect. Jun 30 02:06:54.233816 missing environment variable: bootfile Jun 30 02:06:54.233894 Retrieving file: pxelinux.cfg/default Jun 30 02:06:54.233940 Waiting for Ethernet connection... unable to connect. Jun 30 02:06:59.073638 Config file not found Jun 30 02:06:59.073638 scanning bus for devices... Jun 30 02:06:59.085586 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 02:06:59.121586 Type: Hard Disk Jun 30 02:06:59.121588 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 02:06:59.137822 Found 1 device(s). Jun 30 02:06:59.137890 Jun 30 02:06:59.137929 SCSI device 0: Jun 30 02:06:59.137970 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 02:06:59.138020 Type: Hard Disk Jun 30 02:06:59.145674 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 02:06:59.145674 ... is now current device Jun 30 02:06:59.157691 Scanning scsi 0... Jun 30 02:06:59.157751 Found U-Boot script /boot.scr Jun 30 02:06:59.337651 1779 bytes read in 38 ms (44.9 KiB/s) Jun 30 02:06:59.373735 ## Executing script at 50000000 Jun 30 02:06:59.373819 Loading dtbs/6.10.0-rc5+/exynos5250-arndale.dtb Jun 30 02:06:59.385697 46641 bytes read in 1982 ms (22.5 KiB/s) Jun 30 02:07:01.305791 983052 bytes read in 120 ms (7.8 MiB/s) Jun 30 02:07:01.437786 Loaded xen-4.19-unstable to 0x41000000 (f000c) Jun 30 02:07:01.437824 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan sched=rtds Jun 30 02:07:01.449782 10785280 bytes read in 597 ms (17.2 MiB/s) Jun 30 02:07:02.049744 Loaded vmlinuz-6.10.0-rc5+ to 0x42000000 (a49200) Jun 30 02:07:02.061779 command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 02:07:02.073727 12142166 bytes read in 788 ms (14.7 MiB/s) Jun 30 02:07:02.853729 Loaded initrd.img-6.10.0-rc5+ to 0x43300000 (b94656) Jun 30 02:07:02.865763 chosen { Jun 30 02:07:02.865815 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan sched=rtds"; Jun 30 02:07:02.877758 #size-cells = <0x00000001>; Jun 30 02:07:02.877814 #address-cells = <0x00000001>; Jun 30 02:07:02.877857 stdout-path = "serial2:115200n8"; Jun 30 02:07:02.889728 module@1 { Jun 30 02:07:02.889782 reg = <0x43300000 0x00b94656>; Jun 30 02:07:02.889826 compatible = "xen,linux-initrd", "xen,multiboot-module"; Jun 30 02:07:02.889873 }; Jun 30 02:07:02.889910 module@0 { Jun 30 02:07:02.901697 bootargs = "ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Jun 30 02:07:02.913761 reg = <0x42000000 0x00a49200>; Jun 30 02:07:02.913817 compatible = "xen,linux-zimage", "xen,multiboot-module"; Jun 30 02:07:02.925774 }; Jun 30 02:07:02.925803 }; Jun 30 02:07:02.925824 Booting 0x41000000 - 0x43000000 Jun 30 02:07:02.925847 Kernel image @ 0x41000000 [ 0x000000 - 0x12f000 ] Jun 30 02:07:02.925872 ## Flattened Device Tree blob at 43000000 Jun 30 02:07:02.937734 Booting using the fdt blob at 0x43000000 Jun 30 02:07:02.937793 reserving fdt memory region: addr=43000000 size=c000 Jun 30 02:07:02.937840 Loading Device Tree to 4fff1000, end 4fffffff ... OK Jun 30 02:07:02.949694 Jun 30 02:07:02.949745 Starting kernel ...(fake run for tracing) Jun 30 02:07:02.949792 Jun 30 02:07:02.949841 Jun 30 02:07:02.961723 Starting kernel ... Jun 30 02:07:02.961782 Jun 30 02:07:02.961782 __ __ _ _ _ ___ _ _ _ Jun 30 02:07:03.009772 \ \/ /___ _ __ | || | / |/ _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Jun 30 02:07:03.009811 \ // _ \ '_ \ | || |_ | | (_) |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Jun 30 02:07:03.021774 / \ __/ | | | |__ _|| |\__, |__| |_| | | | \__ \ || (_| | |_) | | __/ Jun 30 02:07:03.033757 /_/\_\___|_| |_| |_|(_)_| /_/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Jun 30 02:07:03.033836 Jun 30 02:07:03.033836 (XEN) Xen version 4.19-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Sat Jun 29 18:19:56 UTC 2024 Jun 30 02:07:03.045745 (XEN) Latest ChangeSet: Wed Jun 26 16:07:30 2024 +0100 git:08f9b1dd9c Jun 30 02:07:03.057741 (XEN) build-id: b9392d5be22d35c0073ac9215c669f6e9fcfb743 Jun 30 02:07:03.057820 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Jun 30 02:07:03.069751 (XEN) 32-bit Execution: Jun 30 02:07:03.069812 (XEN) Processor Features: 00001031:00011011 Jun 30 02:07:03.069858 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Jun 30 02:07:03.081768 (XEN) Extensions: GenericTimer Security Jun 30 02:07:03.081800 (XEN) Debug Features: 02010555 Jun 30 02:07:03.081854 (XEN) Auxiliary Features: 00000000 Jun 30 02:07:03.081896 (XEN) Memory Model Features: 10201105 20000000 Jun 30 02:07:03.097797 (XEN) 01240000 02102211 Jun 30 02:07:03.097900 (XEN) ISA Features: 02101110 13112111 21232041 Jun 30 02:07:03.097966 (XEN) 11112131 10011142 00000000 Jun 30 02:07:03.109511 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Jun 30 02:07:03.109511 (XEN) Set SYSRAM to 0000000041000074 (00200074) Jun 30 02:07:03.121605 (XEN) SMP: Allowing 2 CPUs Jun 30 02:07:03.121605 (XEN) enabled workaround for: ARM erratum 766422 Jun 30 02:07:03.121605 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Jun 30 02:07:03.133754 (XEN) GICv2 initialization: Jun 30 02:07:03.133816 (XEN) gic_dist_addr=0000000010481000 Jun 30 02:07:03.133863 (XEN) gic_cpu_addr=0000000010482000 Jun 30 02:07:03.145688 (XEN) gic_hyp_addr=0000000010484000 Jun 30 02:07:03.145688 (XEN) gic_vcpu_addr=0000000010486000 Jun 30 02:07:03.145688 (XEN) gic_maintenance_irq=25 Jun 30 02:07:03.157778 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Jun 30 02:07:03.157843 (XEN) Using scheduler: SMP RTDS Scheduler (rtds) Jun 30 02:07:03.157889 (XEN) Initializing RTDS scheduler Jun 30 02:07:03.169789 (XEN) WARNING: This is experimental software in development. Jun 30 02:07:03.169850 (XEN) Use at your own risk. Jun 30 02:07:03.169894 (XEN) Allocated console ring of 16 KiB. Jun 30 02:07:03.185779 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Jun 30 02:07:03.185843 (XEN) CPU0: Guest atomics will try 2 times before pausing the domain Jun 30 02:07:03.185893 (XEN) Bringing up CPU1 Jun 30 02:07:03.197629 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Jun 30 02:07:03.197629 (XEN) Brought up 2 CPUs Jun 30 02:07:03.197629 (XEN) CPU 1 booted. Jun 30 02:07:03.197629 (XEN) I/O virtualisation disabled Jun 30 02:07:03.209613 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Jun 30 02:07:03.209647 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Jun 30 02:07:03.209681 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Jun 30 02:07:03.221725 (XEN) Initializing RTDS scheduler Jun 30 02:07:03.221795 (XEN) WARNING: This is experimental software in development. Jun 30 02:07:03.233701 (XEN) Use at your own risk. Jun 30 02:07:03.233701 (XEN) common/sched/rt.c:745: RTDS: timer initialized on cpu 0 Jun 30 02:07:03.233701 (XEN) alternatives: Patching with alt table 002c2f84 -> 002c305c Jun 30 02:07:03.245730 (XEN) CPU0 will execute ICIALLU on guest exit Jun 30 02:07:03.245730 (XEN) CPU1 will execute ICIALLU on guest exit Jun 30 02:07:03.245730 (XEN) *** LOADING DOMAIN 0 *** Jun 30 02:07:03.253636 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Jun 30 02:07:03.253636 (XEN) Loading ramdisk from boot module @ 0000000043300000 Jun 30 02:07:03.265688 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Jun 30 02:07:03.265688 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Jun 30 02:07:03.853661 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Jun 30 02:07:03.853661 (XEN) Allocating PPI 16 for event channel interrupt Jun 30 02:07:03.889656 (XEN) d0: extended regions not supported for 32-bit guests Jun 30 02:07:03.889656 (XEN) Loading zImage from 0000000042000000 to 0000000067400000-0000000067e49200 Jun 30 02:07:03.901630 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d94656 Jun 30 02:07:03.997637 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b499 Jun 30 02:07:04.093658 (XEN) Initial low memory virq threshold set at 0x4000 pages. Jun 30 02:07:04.105684 (XEN) Scrubbing Free RAM in background Jun 30 02:07:04.105684 (XEN) Std. Loglevel: All Jun 30 02:07:04.105684 (XEN) Guest Loglevel: All Jun 30 02:07:04.105684 (XEN) *************************************************** Jun 30 02:07:04.117672 (XEN) WARNING: SILO mode is not enabled. Jun 30 02:07:04.117672 (XEN) It has implications on the security of the system, Jun 30 02:07:04.117672 (XEN) unless the communications have been forbidden between Jun 30 02:07:04.129686 (XEN) untrusted domains. Jun 30 02:07:04.129686 (XEN) *************************************************** Jun 30 02:07:04.141592 (XEN) 3... 2... 1... Jun 30 02:07:07.137772 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 30 02:07:07.149764 (XEN) Freed 352kB init memory. Jun 30 02:07:07.149795 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 02:07:08.281792 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Jun 30 02:07:08.305814 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Jun 30 02:07:08.305876 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Jun 30 02:07:08.317816 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Jun 30 02:07:08.317879 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 02:07:08.329682 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 02:07:08.365828 [ 0.000000] Linux version 6.10.0-rc5+ (osstest@himrod2) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Sat Jun 29 17:14:33 UTC 2024 Jun 30 02:07:08.377815 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 30 02:07:08.389822 [ 0.000000] CPU: div instructions available: patching division code Jun 30 02:07:08.389885 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 02:07:08.401824 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 02:07:08.413816 [ 0.000000] Memory policy: Data cache writealloc Jun 30 02:07:08.413875 [ 0.000000] Xen 4.19 support found Jun 30 02:07:08.413919 [ 0.000000] efi: UEFI not found. Jun 30 02:07:08.425805 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 on node -1 Jun 30 02:07:08.425866 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 02:07:08.425912 [ 0.000000] Zone ranges: Jun 30 02:07:08.437815 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Jun 30 02:07:08.437877 [ 0.000000] Normal empty Jun 30 02:07:08.437921 [ 0.000000] HighMem empty Jun 30 02:07:08.449823 [ 0.000000] Movable zone start for each node Jun 30 02:07:08.449882 [ 0.000000] Early memory node ranges Jun 30 02:07:08.449927 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Jun 30 02:07:08.461827 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Jun 30 02:07:08.461891 [ 0.000000] psci: probing for conduit method from DT. Jun 30 02:07:08.473807 [ 0.000000] psci: PSCIv1.1 detected in firmware. Jun 30 02:07:08.473867 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Jun 30 02:07:08.485825 [ 0.000000] psci: Trusted OS migration not required Jun 30 02:07:08.485885 [ 0.000000] psci: SMC Calling Convention v1.2 Jun 30 02:07:08.485931 [ 0.000000] percpu: Embedded 18 pages/cpu s41428 r8192 d24108 u73728 Jun 30 02:07:08.497824 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 02:07:08.509760 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 02:07:08.521766 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Jun 30 02:07:08.533745 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 131072 Jun 30 02:07:08.533808 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Jun 30 02:07:08.545751 [ 0.000000] Memory: 414600K/524288K available (15360K kernel code, 2268K rwdata, 6084K rodata, 2048K init, 439K bss, 44152K reserved, 65536K cma-reserved, 0K highmem) Jun 30 02:07:08.557732 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 02:07:08.569765 [ 0.000000] trace event string verifier disabled Jun 30 02:07:08.569825 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 02:07:08.569907 [ 0.000000] rcu: RCU event tracing is enabled. Jun 30 02:07:08.581757 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Jun 30 02:07:08.581821 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Jun 30 02:07:08.593735 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 02:07:08.605741 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 02:07:08.605803 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 02:07:08.617724 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 02:07:08.617787 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Jun 30 02:07:08.629740 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 02:07:08.641742 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 02:07:08.641812 [ 0.000013] Switching to timer-based delay loop, resolution 41ns Jun 30 02:07:08.653749 [ 0.000516] Console: colour dummy device 80x30 Jun 30 02:07:08.653809 [ 0.000534] printk: legacy console [hvc0] enabled Jun 30 02:07:08.665765 [ 0.299534] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Jun 30 02:07:08.665841 [ 0.309933] CPU: Testing write buffer coherency: ok Jun 30 02:07:08.677775 [ 0.314874] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 02:07:08.689788 [ 0.324428] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 02:07:08.689852 [ 0.330841] pid_max: default: 32768 minimum: 301 Jun 30 02:07:08.701784 [ 0.335627] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 02:07:08.701853 [ 0.342919] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 02:07:08.713813 [ 0.351328] /cpus/cpu@0 missing clock-frequency property Jun 30 02:07:08.713874 [ 0.356129] /cpus/cpu@1 missing clock-frequency property Jun 30 02:07:08.725810 [ 0.361505] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 02:07:08.725872 [ 0.368232] xen:grant_table: Grant tables using version 1 layout Jun 30 02:07:08.737816 [ 0.373372] Grant table initialized Jun 30 02:07:08.737874 [ 0.376912] xen:events: Using FIFO-based ABI Jun 30 02:07:08.737920 [ 0.381215] Xen: initializing cpu0 Jun 30 02:07:08.749816 [ 0.384739] Setting up static identity map for 0x60300000 - 0x603000ac Jun 30 02:07:08.749879 [ 0.392506] rcu: Hierarchical SRCU implementation. Jun 30 02:07:08.761807 [ 0.396134] rcu: Max phase no-delay instances is 1000. Jun 30 02:07:08.761870 [ 0.404384] EFI services will not be available. Jun 30 02:07:08.773768 [ 0.407710] smp: Bringing up secondary CPUs ... Jun 30 02:07:08.773828 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 02:07:08.848762 [ 0.482025] Xen: initializing cpu1 Jun 30 02:07:08.848821 [ 0.482186] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 02:07:08.848870 [ 0.482210] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 02:07:08.860796 [ 0.501161] smp: Brought up 1 node, 2 CPUs Jun 30 02:07:08.860855 [ 0.504823] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 02:07:08.872773 [ 0.511110] CPU: All CPU(s) started in SVC mode. Jun 30 02:07:08.872833 [ 0.517010] devtmpfs: initialized Jun 30 02:07:08.884714 [ 0.529490] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 02:07:08.896792 [ 0.536042] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Jun 30 02:07:08.908785 [ 0.545713] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 02:07:08.908848 [ 0.553606] pinctrl core: initialized pinctrl subsystem Jun 30 02:07:08.920705 [ 0.560265] DMI not present or invalid. Jun 30 02:07:08.920765 [ 0.563773] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 02:07:08.932592 [ 0.570394] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 02:07:08.932592 [ 0.579756] thermal_sys: Registered thermal governor 'step_wise' Jun 30 02:07:08.944595 [ 0.579915] software IO TLB: area num 2. Jun 30 02:07:08.944595 [ 0.588600] software IO TLB: only able to allocate 8 MB Jun 30 02:07:08.956594 [ 0.595668] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Jun 30 02:07:08.956594 [ 0.600867] No ATAGs? Jun 30 02:07:08.968590 [ 0.603195] hw-breakpoint: Failed to enable monitor mode on CPU 0. Jun 30 02:07:08.968590 [ 0.611908] Serial: AMBA PL011 UART driver Jun 30 02:07:08.980532 [ 0.658610] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 65 Jun 30 02:07:09.028543 [ 0.687097] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 30 02:07:09.052569 [ 0.711082] xen:balloon: Initialising balloon driver Jun 30 02:07:09.076776 [ 0.717549] iommu: Default domain type: Translated Jun 30 02:07:09.076841 [ 0.720964] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 02:07:09.088649 [ 0.729762] SCSI subsystem initialized Jun 30 02:07:09.088719 [ 0.732533] usbcore: registered new interface driver usbfs Jun 30 02:07:09.100682 [ 0.737762] usbcore: registered new interface driver hub Jun 30 02:07:09.100743 [ 0.743119] usbcore: registered new device driver usb Jun 30 02:07:09.112662 [ 0.749798] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 02:07:09.112723 [ 0.753398] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 02:07:09.124653 [ 0.759646] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 02:07:09.124653 [ 0.764709] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 02:07:09.124653 [ 0.769655] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 02:07:09.133789 [ 0.775675] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 02:07:09.133849 [ 0.781456] pps_core: LinuxPPS API ver. 1 registered Jun 30 02:07:09.148725 [ 0.785846] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 02:07:09.160584 [ 0.795073] PTP clock support registered Jun 30 02:07:09.160584 [ 0.799305] EDAC MC: Ver: 3.0.0 Jun 30 02:07:09.160584 [ 0.802566] scmi_core: SCMI protocol bus registered Jun 30 02:07:09.172777 [ 0.809268] vgaarb: loaded Jun 30 02:07:09.172840 [ 0.813044] clocksource: Switched to clocksource arch_sys_counter Jun 30 02:07:09.184707 [ 0.830384] NET: Registered PF_INET protocol family Jun 30 02:07:09.196743 [ 0.834059] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Jun 30 02:07:09.196814 [ 0.841930] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 02:07:09.208679 [ 0.849629] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 02:07:09.220637 [ 0.857430] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Jun 30 02:07:09.220706 [ 0.865266] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Jun 30 02:07:09.232654 [ 0.872541] TCP: Hash tables configured (established 4096 bind 4096) Jun 30 02:07:09.244603 [ 0.878915] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 02:07:09.244664 [ 0.885484] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 02:07:09.256546 [ 0.892592] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 02:07:09.256546 [ 0.901130] RPC: Registered named UNIX socket transport module. Jun 30 02:07:09.266258 [ 0.905688] RPC: Registered udp transport module. Jun 30 02:07:09.266258 [ 0.910448] RPC: Registered tcp transport module. Jun 30 02:07:09.280630 [ 0.915237] RPC: Registered tcp-with-tls transport module. Jun 30 02:07:09.280630 [ 0.920776] RPC: Registered tcp NFSv4.1 backchannel transport module. Jun 30 02:07:09.292605 [ 0.927302] PCI: CLS 0 bytes, default 64 Jun 30 02:07:09.292605 [ 0.932732] Initialise system trusted keyrings Jun 30 02:07:09.292605 [ 0.936034] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Jun 30 02:07:09.301772 [ 0.942561] squashfs: version 4.0 (2009/01/31) Phillip Lougher Jun 30 02:07:09.301833 [ 0.948456] Trying to unpack rootfs image as initramfs... Jun 30 02:07:09.314352 [ 0.973433] NFS: Registering the id_resolver key type Jun 30 02:07:09.340759 [ 0.977162] Key type id_resolver registered Jun 30 02:07:09.340819 [ 0.981387] Key type id_legacy registered Jun 30 02:07:09.340875 [ 0.985503] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Jun 30 02:07:09.352523 [ 0.992230] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Jun 30 02:07:09.364575 [ 1.015029] Key type asymmetric registered Jun 30 02:07:09.376559 [ 1.017779] Asymmetric key parser 'x509' registered Jun 30 02:07:09.388628 [ 1.022762] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) Jun 30 02:07:09.388628 [ 1.030205] io scheduler mq-deadline registered Jun 30 02:07:09.400662 [ 1.034791] io scheduler kyber registered Jun 30 02:07:09.400662 [ 1.038871] io scheduler bfq registered Jun 30 02:07:09.400662 [ 1.169508] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 02:07:09.532586 [ 1.175763] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 02:07:09.544573 [ 1.212567] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 02:07:09.580603 [ 1.218824] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 02:07:09.592534 [ 1.259078] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 02:07:09.628601 [ 1.265341] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 02:07:09.640531 [ 1.314484] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 02:07:09.676667 [ 1.320699] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 02:07:09.688586 [ 1.333569] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 02:07:09.700652 [ 1.412872] xen:xen_evtchn: Event-channel device installed Jun 30 02:07:09.772568 [ 1.461702] Freeing initrd memory: 11860K Jun 30 02:07:09.820552 [ 1.510126] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 02:07:09.880608 [ 1.521523] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 02:07:09.892594 [ 1.529704] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 02:07:09.904602 [ 1.538638] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 02:07:09.904602 [ 1.547640] SuperH (H)SCI(F) driver initialized Jun 30 02:07:09.916574 [ 1.551937] STMicroelectronics ASC driver initialized Jun 30 02:07:09.916574 [ 1.556817] STM32 USART driver initialized Jun 30 02:07:09.916574 [ 1.563152] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 02:07:09.928665 [ 1.571812] random: crng init done Jun 30 02:07:09.940560 [ 1.579606] brd: module loaded Jun 30 02:07:09.940560 [ 1.585644] loop: module loaded Jun 30 02:07:09.952536 [ 1.601267] Invalid max_queues (4), will use default max: 2. Jun 30 02:07:09.964539 [ 1.620060] tun: Universal TUN/TAP device driver, 1.6 Jun 30 02:07:09.988594 [ 1.623955] CAN device driver interface Jun 30 02:07:09.988594 [ 1.629081] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Jun 30 02:07:09.988594 [ 1.640297] xen_netfront: Initialising Xen virtual ethernet driver Jun 30 02:07:10.000572 [ 1.645162] pegasus: Pegasus/Pegasus II USB Ethernet driver Jun 30 02:07:10.012603 [ 1.650768] usbcore: registered new interface driver pegasus Jun 30 02:07:10.012603 [ 1.656507] usbcore: registered new interface driver asix Jun 30 02:07:10.024604 [ 1.661976] usbcore: registered new interface driver ax88179_178a Jun 30 02:07:10.024604 [ 1.668136] usbcore: registered new interface driver cdc_ether Jun 30 02:07:10.036603 [ 1.674037] usbcore: registered new interface driver smsc75xx Jun 30 02:07:10.036603 [ 1.679851] usbcore: registered new interface driver smsc95xx Jun 30 02:07:10.048604 [ 1.685677] usbcore: registered new interface driver net1080 Jun 30 02:07:10.048604 [ 1.691388] usbcore: registered new interface driver cdc_subset Jun 30 02:07:10.060602 [ 1.697387] usbcore: registered new interface driver zaurus Jun 30 02:07:10.060602 [ 1.703062] usbcore: registered new interface driver cdc_ncm Jun 30 02:07:10.072582 [ 1.712399] usbcore: registered new interface driver usb-storage Jun 30 02:07:10.072582 [ 1.722966] i2c_dev: i2c /dev entries driver Jun 30 02:07:10.084549 [ 1.741428] device-mapper: uevent: version 1.0.3 Jun 30 02:07:10.108607 [ 1.744891] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev Jun 30 02:07:10.108607 [ 1.754486] cpu cpu0: OPP table can't be empty Jun 30 02:07:10.120741 [ 1.759177] failed to register cpuidle driver Jun 30 02:07:10.120808 [ 1.762557] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Jun 30 02:07:10.132606 [ 1.770930] sdhci: Secure Digital Host Controller Interface driver Jun 30 02:07:10.132606 [ 1.775935] sdhci: Copyright(c) Pierre Ossman Jun 30 02:07:10.144703 [ 1.784055] sdhci-pltfm: SDHCI platform and OF driver helper Jun 30 02:07:10.144771 [ 1.793101] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 02:07:10.156713 [ 1.798549] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Jun 30 02:07:10.168599 [ 1.805389] usbcore: registered new interface driver usbhid Jun 30 02:07:10.168599 [ 1.809881] usbhid: USB HID core driver Jun 30 02:07:10.184594 [ 1.820944] NET: Registered PF_INET6 protocol family Jun 30 02:07:10.184594 [ 1.825447] Segment Routing with IPv6 Jun 30 02:07:10.184594 [ 1.828316] In-situ OAM (IOAM) with IPv6 Jun 30 02:07:10.196605 [ 1.832340] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Jun 30 02:07:10.196605 [ 1.838812] NET: Registered PF_PACKET protocol family Jun 30 02:07:10.208601 [ 1.843450] can: controller area network core Jun 30 02:07:10.208601 [ 1.847842] NET: Registered PF_CAN protocol family Jun 30 02:07:10.208601 [ 1.852665] can: raw protocol Jun 30 02:07:10.220560 [ 1.855721] can: broadcast manager protocol Jun 30 02:07:10.220560 [ 1.859961] can: netlink gateway - max_hops=1 Jun 30 02:07:10.220560 [ 1.864709] Key type dns_resolver registered Jun 30 02:07:10.232557 [ 1.869401] ThumbEE CPU extension supported. Jun 30 02:07:10.232557 [ 1.873116] Registering SWP/SWPB emulation handler Jun 30 02:07:10.244501 [ 1.887455] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level Jun 30 02:07:10.256545 [ 1.894350] Loading compiled-in X.509 certificates Jun 30 02:07:10.256545 [ 1.937848] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 02:07:10.304599 [ 1.941462] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 02:07:10.304599 [ 1.948391] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 02:07:10.316596 [ 1.956251] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 02:07:10.328592 [ 1.997723] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 02:07:10.364576 [ 2.006585] s5m-rtc s5m-rtc: setting system clock to 2000-01-02T05:23:33 UTC (946790613) Jun 30 02:07:10.376646 [ 2.017657] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 02:07:10.376646 [ 2.022271] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 02:07:10.388595 [ 2.026708] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 02:07:10.388595 [ 2.033490] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 02:07:10.400599 [ 2.039288] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 02:07:10.400599 [ 2.045502] clk: Not disabling unused clocks Jun 30 02:07:10.412595 [ 2.048954] PM: genpd: Disabling unused power domains Jun 30 02:07:10.412595 [ 2.057480] Freeing unused kernel image (initmem) memory: 2048K Jun 30 02:07:10.424577 [ 2.063867] Run /init as init process Jun 30 02:07:10.424577 Loading, please wait... Jun 30 02:07:10.448533 Starting systemd-udevd version 252.26-1~deb12u2 Jun 30 02:07:10.520557 [ 3.295087] i2c-gpio i2c-10: using lines 552 (SDA) and 553 (SCL) Jun 30 02:07:11.660732 [ 3.433488] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 02:07:11.804600 [ 3.440587] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 02:07:11.804600 [ 3.502008] Synopsys Designware Multimedia Card Interface Driver Jun 30 02:07:11.864564 [ 3.512432] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 30 02:07:11.876590 [ 3.514058] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 30 02:07:11.888534 [ 3.540715] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 30 02:07:11.912630 [ 3.545850] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 30 02:07:11.912630 [ 3.551324] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 125,32 bit host data width,128 deep fifo Jun 30 02:07:11.924599 [ 3.560978] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 30 02:07:11.924599 [ 3.567366] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 30 02:07:11.936609 [ 3.573219] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo Jun 30 02:07:11.948564 [ 3.590509] mmc_host mmc0: card is polling. Jun 30 02:07:11.948564 [ 3.613177] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 02:07:11.984601 [ 3.617251] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 02:07:11.984601 [ 3.619899] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 02:07:11.996592 [ 3.777620] phy phy-12130000.phy.9: phy_power_on was called before phy_init Jun 30 02:07:12.140587 [ 3.783325] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 02:07:12.152604 [ 3.788799] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Jun 30 02:07:12.152604 [ 3.797434] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 02:07:12.164603 [ 3.797522] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 30 02:07:12.164603 [ 3.809335] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 30 02:07:12.176594 [ 3.816732] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 30 02:07:12.188576 [ 3.827473] exynos-ehci 12110000.usb: irq 127, io mem 0x12110000 Jun 30 02:07:12.188576 [ 3.837180] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 30 02:07:12.200592 [ 3.842927] ahci-dwc 122f0000.sata: AHCI vers 0001.0300, 32 command slots, 6 Gbps, platform mode Jun 30 02:07:12.212575 [ 3.851757] ahci-dwc 122f0000.sata: 1/1 ports implemented (port mask 0x1) Jun 30 02:07:12.239218 [ 3.858598] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 30 02:07:12.239314 [ 3.868877] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 02:07:12.239355 [ 3.877744] hub 1-0:1.0: USB hub found Jun 30 02:07:12.239355 [ 3.882233] hub 1-0:1.0: 3 ports detected Jun 30 02:07:12.248603 [ 3.886369] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 30 02:07:12.260587 [ 3.895280] mmc0: new DDR MMC card at address 0001 Jun 30 02:07:12.260587 [ 3.903740] phy phy-12130000.phy.9: phy_power_on was called before phy_init Jun 30 02:07:12.272750 [ 3.909379] exynos-ohci 12120000.usb: USB Host Controller Jun 30 02:07:12.272822 [ 3.914896] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Jun 30 02:07:12.284606 [ 3.922597] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 02:07:12.296621 [ 3.924371] scsi host0: ahci-dwc Jun 30 02:07:12.296621 [ 3.936144] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Jun 30 02:07:12.296621 [ 3.940945] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 128 lpm-pol 0 Jun 30 02:07:12.308600 [ 3.949936] mmc1: new high speed SDHC card at address aaaa Jun 30 02:07:12.320589 [ 3.951380] mmcblk0: p1 p2 p3 p4 Jun 30 02:07:12.320589 [ 3.958098] exynos-ohci 12120000.usb: irq 127, io mem 0x12120000 Jun 30 02:07:12.320589 [ 3.965126] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Jun 30 02:07:12.336574 [ 3.970974] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Jun 30 02:07:12.336574 [ 3.975481] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Jun 30 02:07:12.336574 [ 3.976415] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Jun 30 02:07:12.348555 [ 4.048199] hub 2-0:1.0: USB hub found Jun 30 02:07:12.408571 [ 4.050976] hub 2-0:1.0: 3 ports detected Jun 30 02:07:12.420540 [ 4.065252] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Jun 30 02:07:12.432567 [ 4.070119] s3c-rtc 101e0000.rtc: registered as rtc1 Jun 30 02:07:12.432567 [ 4.453515] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 30 02:07:12.816589 [ 4.459766] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 30 02:07:12.828606 [ 4.465152] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 30 02:07:12.828606 [ 4.472693] ata1.00: configured for UDMA/133 Jun 30 02:07:12.840739 [ 4.476495] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 30 02:07:12.840739 [ 4.490083] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 30 02:07:12.852507 [ 4.496224] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 30 02:07:12.864604 [ 4.501558] sd 0:0:0:0: [sda] Write Protect is off Jun 30 02:07:12.864604 [ 4.506476] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 30 02:07:12.876570 [ 4.515657] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 30 02:07:12.888520 [ 4.566902] sda: sda1 sda2 < sda5 > Jun 30 02:07:12.924555 [ 4.569750] sd 0:0:0:0: [sda] Attached SCSI disk Jun 30 02:07:12.936553 [ 4.691742] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Jun 30 02:07:13.056581 [ 4.700450] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 02:07:13.068585 [ 4.704667] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 02:07:13.068585 [ 4.766538] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002000010 Jun 30 02:07:13.140581 [ 4.775062] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Jun 30 02:07:13.140581 [ 4.780943] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 02:07:13.152604 [ 4.786264] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 02:07:13.152604 [ 4.793980] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 02:07:13.164721 [ 4.811470] hub 3-0:1.0: USB hub found Jun 30 02:07:13.176705 [ 4.816494] hub 3-0:1.0: 1 port detected Jun 30 02:07:13.176763 [ 4.835530] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 02:07:13.200763 [ 4.847338] hub 4-0:1.0: USB hub found Jun 30 02:07:13.212740 [ 4.850184] hub 4-0:1.0: 1 port detected Jun 30 02:07:13.212798 [ 5.143088] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 02:07:13.512789 [ 5.312159] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 02:07:13.680673 [ 5.449845] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 02:07:13.824526 [ 5.558179] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 02:07:13.932534 [ 5.666468] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 02:07:14.040517 [ 5.774770] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 02:07:14.148573 [ 6.132655] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 02:07:14.496759 [ 6.303543] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 02:07:14.676593 [ 6.417981] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 02:07:14.784596 [ 6.525733] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 02:07:14.892775 [ 6.633505] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 02:07:15.000678 [ 6.741216] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 02:07:15.108894 [ 6.748836] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 02:07:15.120669 Begin: Loading essential drivers ... done. Jun 30 02:07:15.172505 Begin: Running /scripts/init-premount ... done. Jun 30 02:07:18.169751 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 30 02:07:18.181757 Begin: Running /scripts/local-premount ... done. Jun 30 02:07:18.193621 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 30 02:07:18.313615 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 30 02:07:18.421663 /dev/mapper/arndale--metrocentre--vg-root: recovering journal Jun 30 02:07:18.661737 /dev/mapper/arndale--metrocentre--vg-root: clean, 46080/1220608 files, 606229/4882432 blocks Jun 30 02:07:19.933752 done. Jun 30 02:07:19.945659 [ 11.595676] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 30 02:07:19.957749 [ 11.963920] EXT4-fs (dm-0): mounted filesystem c58c01de-2a0d-467e-9a9b-d5bdb747cef1 ro with ordered data mode. Quota mode: disabled. Jun 30 02:07:20.329766 done. Jun 30 02:07:20.329817 Begin: Running /scripts/local-bottom ... done. Jun 30 02:07:20.377740 Begin: Running /scripts/init-bottom ... done. Jun 30 02:07:20.413689 INIT: version 3.06 booting Jun 30 02:07:20.869711 INIT: No inittab.d directory found Jun 30 02:07:20.977696 Using makefile-style concurrent boot in runlevel S. Jun 30 02:07:21.253720 Starting hotplug events dispatcher: systemd-udevd. Jun 30 02:07:22.849765 Synthesizing the initial hotplug events (subsystems)...done. Jun 30 02:07:23.305739 Synthesizing the initial hotplug events (devices)...[ 15.382582] wm8994 3-001a: Device is not a WM8994, ID is 0 Jun 30 02:07:23.749727 [ 15.395145] wm8994 3-001a: probe with driver wm8994 failed with error -22 Jun 30 02:07:23.761793 done. Jun 30 02:07:24.145705 Waiting for /dev to be fully populated...[ 15.873849] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 30 02:07:24.241799 [ 15.886592] s5p-secss 10830000.sss: s5p-sss driver registered Jun 30 02:07:24.253708 [ 15.909066] mc: Linux media interface: v0.10 Jun 30 02:07:24.265612 [ 16.079193] videodev: Linux video capture interface: v2.00 Jun 30 02:07:24.445623 [ 16.344767] exynos-gsc 13e00000.gsc: Adding to iommu group 0 Jun 30 02:07:24.709795 [ 16.350546] exynos-gsc 13e10000.gsc: Adding to iommu group 1 Jun 30 02:07:24.709861 [ 16.355955] exynos-gsc 13e20000.gsc: Adding to iommu group 2 Jun 30 02:07:24.721788 [ 16.362258] exynos-gsc 13e30000.gsc: Adding to iommu group 3 Jun 30 02:07:24.721852 [ 16.460457] s5p-mfc 11000000.codec: Adding to iommu group 4 Jun 30 02:07:24.817736 [ 16.473449] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Jun 30 02:07:24.841642 [ 16.492327] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 02:07:24.853609 [ 16.501265] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 02:07:24.865802 [ 16.508820] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 02:07:24.877715 [ 16.522334] s5p-mfc 11000000.codec: decoder registered as /dev/video4 Jun 30 02:07:24.889733 [ 16.533144] usb3503 usb-hub: switched to HUB mode Jun 30 02:07:24.889793 [ 16.536495] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 02:07:24.901680 [ 16.550856] s5p-mfc 11000000.codec: encoder registered as /dev/video5 Jun 30 02:07:24.913763 [ 16.597200] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 02:07:24.961775 [ 16.802463] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 02:07:25.165756 [ 16.883139] usb 1-3: new high-speed USB device number 2 using exynos-ehci Jun 30 02:07:25.249670 [ 16.913398] I/O error, dev mmcblk1, sector 7744000 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 02:07:25.273766 [ 16.999236] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Jun 30 02:07:25.357756 [ 17.044301] I/O error, dev mmcblk1, sector 7744001 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 02:07:25.405765 [ 17.098407] hub 1-3:1.0: USB hub found Jun 30 02:07:25.453647 [ 17.101227] hub 1-3:1.0: 3 ports detected Jun 30 02:07:25.465703 [ 17.164747] I/O error, dev mmcblk1, sector 7744002 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 02:07:25.525775 [ 17.272972] I/O error, dev mmcblk1, sector 7744003 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 02:07:25.633823 [ 17.383197] I/O error, dev mmcblk1, sector 7744004 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 02:07:25.753693 [ 17.405099] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 02:07:25.765759 [ 17.412794] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 02:07:25.777771 [ 17.421593] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 02:07:25.789778 [ 17.432969] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 02:07:25.801767 [ 17.441126] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 02:07:25.801837 [ 17.449837] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 02:07:25.813775 [ 17.453167] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Jun 30 02:07:25.825736 [ 17.491911] I/O error, dev mmcblk1, sector 7744005 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 02:07:25.861698 [ 17.600188] I/O error, dev mmcblk1, sector 7744006 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 02:07:25.969704 [ 17.635727] hub 1-3.2:1.0: USB hub found Jun 30 02:07:25.993748 [ 17.638708] hub 1-3.2:1.0: 4 ports detected Jun 30 02:07:26.005706 [ 17.708486] I/O error, dev mmcblk1, sector 7744007 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 02:07:26.077734 [ 17.747175] usbcore: registered new device driver onboard-usb-dev Jun 30 02:07:26.113650 [ 17.816720] I/O error, dev mmcblk1, sector 7744008 op 0x0:(READ) flags 0x80700 phys_seg 13 prio class 0 Jun 30 02:07:26.185727 [ 17.873902] hub 1-3.2:1.0: USB hub found Jun 30 02:07:26.233794 [ 17.876841] hub 1-3.2:1.0: 4 ports detected Jun 30 02:07:26.233855 [ 17.890823] hub 1-3.2:1.0: USB hub found Jun 30 02:07:26.245726 [ 17.893924] hub 1-3.2:1.0: 4 ports detected Jun 30 02:07:26.257737 [ 17.933213] I/O error, dev mmcblk1, sector 7744009 op 0x0:(READ) flags 0x80700 phys_seg 13 prio class 0 Jun 30 02:07:26.293756 [ 18.213069] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 30 02:07:26.581703 [ 18.366955] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 30 02:07:26.737696 [ 19.074953] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 02:07:27.445700 [ 19.089700] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Jun 30 02:07:27.457771 [ 19.099535] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, da:77:c4:1c:4e:1a Jun 30 02:07:27.469665 [ 20.054711] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 02:07:28.417773 [ 20.201170] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 02:07:28.561787 [ 21.010622] Buffer I/O error on dev mmcblk1, logical block 968000, async page read Jun 30 02:07:29.377720 done. Jun 30 02:07:29.389698 [ 21.467271] EXT4-fs (dm-0): re-mounted c58c01de-2a0d-467e-9a9b-d5bdb747cef1 r/w. Quota mode: disabled. Jun 30 02:07:29.833755 Checking file systems.../dev/sda1: recovering journal Jun 30 02:07:30.805730 /dev/sda1: clean, 2179/61056 files, 44464/243968 blocks Jun 30 02:07:30.973710 done. Jun 30 02:07:31.045706 Cleaning up temporary files... /tmp. Jun 30 02:07:31.165734 [ 22.990724] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 30 02:07:31.357726 [ 23.042610] EXT4-fs (sda1): mounted filesystem bfc2f879-87f2-4292-8d88-e51527b92b0d r/w with ordered data mode. Quota mode: disabled. Jun 30 02:07:31.405805 [ 23.142954] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k Jun 30 02:07:31.513721 Mounting local filesystems...done. Jun 30 02:07:31.765737 Activating swapfile swap, if any...done. Jun 30 02:07:31.765796 Cleaning up temporary files.... Jun 30 02:07:31.801708 Starting Setting kernel variables: sysctl. Jun 30 02:07:31.997759 [ 25.032444] xenbr0: port 1(eth0) entered blocking state Jun 30 02:07:33.389771 [ 25.036359] xenbr0: port 1(eth0) entered disabled state Jun 30 02:07:33.401824 [ 25.041627] asix 1-3.2.4:1.0 eth0: entered allmulticast mode Jun 30 02:07:33.401887 [ 25.047479] asix 1-3.2.4:1.0 eth0: entered promiscuous mode Jun 30 02:07:33.413762 [ 25.058046] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Jun 30 02:07:33.425702 Configuring network interfaces...RTNETLINK answers: Operation not supported Jun 30 02:07:35.289814 Jun 30 02:07:35.289893 Waiting for xenbr0 to get ready (MAXWAIT is 2 seconds). Jun 30 02:07:35.301552 [ 27.300173] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 30 02:07:35.661779 [ 27.306247] xenbr0: port 1(eth0) entered blocking state Jun 30 02:07:35.673739 [ 27.311409] xenbr0: port 1(eth0) entered forwarding state Jun 30 02:07:35.673801 done. Jun 30 02:07:35.829693 Cleaning up temporary files.... Jun 30 02:07:35.937670 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Jun 30 02:07:35.985699 Starting nftables: none Jun 30 02:07:36.045704 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Jun 30 02:07:36.117762 failed! Jun 30 02:07:36.117815 startpar: service(s) returned failure: nftables ... failed! Jun 30 02:07:36.129656 INIT: Entering runlevel: 2 Jun 30 02:07:36.141701 Using makefile-style concurrent boot in runlevel 2. Jun 30 02:07:36.165664 Starting Apache httpd web server: apache2AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.149.64.44. Set the 'ServerName' directive globally to suppress this message Jun 30 02:07:37.005792 . Jun 30 02:07:38.073690 Starting NTP server: ntpd2000-01-02T05:24:01 ntpd[1143]: INIT: ntpd ntpsec-1.2.2: Starting Jun 30 02:07:38.469758 2000-01-02T05:24:01 ntpd[1143]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 30 02:07:38.481728 . Jun 30 02:07:38.481755 Starting SMP IRQ Balancer: irqbalance. Jun 30 02:07:38.709717 Starting system message bus: dbus. Jun 30 02:07:39.021703 Starting OpenBSD Secure Shell server: sshd. Jun 30 02:07:39.729741 Starting /usr/local/sbin/oxenstored... Jun 30 02:07:41.917773 Setting domain 0 name, domid and JSON config... Jun 30 02:07:41.917843 Done setting up Dom0 Jun 30 02:07:41.917886 Starting xenconsoled... Jun 30 02:07:41.917928 Starting QEMU as disk backend for dom0 Jun 30 02:07:41.929699 Jun 30 02:07:43.021703 Debian GNU/Linux 12 arndale-metrocentre hvc0 Jun 30 02:07:43.033728 Jun 30 02:07:43.033779 arndale-metrocentre login: INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 02:09:22.053793 Jun 30 02:12:19.445694 Jun 30 02:12:19.445789 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 02:12:19.445847 Jun 30 02:12:19.445886 CPU: Exynos5250@1000MHz Jun 30 02:12:19.457720 Jun 30 02:12:19.457772 Board: Arndale Jun 30 02:12:19.457815 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 02:12:19.457863 ready Jun 30 02:12:19.457901 DRAM: 2 GiB Jun 30 02:12:19.457941 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 02:12:19.481679 trace: enabled Jun 30 02:12:19.517648 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 02:12:19.877691 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 02:12:19.937754 In: serial Jun 30 02:12:19.937800 Out: serial Jun 30 02:12:19.937842 Err: serial Jun 30 02:12:19.937882 SCSI: ARNDALE SCSI INIT Jun 30 02:12:19.937925 Target spinup took 0 ms. Jun 30 02:12:19.949797 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 02:12:19.949859 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 02:12:19.949908 Net: Net Initialization Skipped Jun 30 02:12:19.961775 No ethernet found. Jun 30 02:12:19.961830 Hostname: arndale-metrocentre Jun 30 02:12:19.961874 Hit any key to stop autoboot: 2  1  0 Jun 30 02:12:21.881705 (Re)start USB... Jun 30 02:12:21.881771 USB0: USB EHCI 1.00 Jun 30 02:12:21.893697 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 02:12:27.485775 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 02:12:27.497753 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 02:12:27.941708 Waiting for Ethernet connection... done. Jun 30 02:12:29.581746 BOOTP broadcast 1 Jun 30 02:12:29.593623 BOOTP broadcast 2 Jun 30 02:12:31.037877 DHCP client bound to address 10.149.64.44 (1509 ms) Jun 30 02:12:31.037960 Using asx0 device Jun 30 02:12:31.037960 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 02:12:31.049760 Filename 'pxelinux.0'. Jun 30 02:12:31.049791 Load address: 0x43e00000 Jun 30 02:12:31.049815 Loading: *### Jun 30 02:12:31.061811 2.5 MiB/s Jun 30 02:12:31.061865 done Jun 30 02:12:31.061905 Bytes transferred = 42430 (a5be hex) Jun 30 02:12:31.073833 missing environment variable: pxeuuid Jun 30 02:12:31.073892 Retrieving file: pxelinux.cfg/0A95402C Jun 30 02:12:31.073938 Using asx0 device Jun 30 02:12:31.073979 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 02:12:31.085967 Filename 'pxelinux.cfg/0A95402C'. Jun 30 02:12:31.086025 Load address: 0x51000000 Jun 30 02:12:31.086069 Loading: *# Jun 30 02:12:31.086108 358.4 KiB/s Jun 30 02:12:31.086149 done Jun 30 02:12:31.097885 Bytes transferred = 734 (2de hex) Jun 30 02:12:31.097944 Config file found Jun 30 02:12:31.097986 Ignoring unknown command: serial Jun 30 02:12:31.098057 1: ^Overwrite Jun 30 02:12:31.098100 Retrieving file: /osstest/tmp//arndale-metrocentre--initrd.gz Jun 30 02:12:31.109817 Using asx0 device Jun 30 02:12:31.109872 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 02:12:31.109921 Filename '/osstest/tmp//arndale-metrocentre--initrd.gz'. Jun 30 02:12:31.121892 Load address: 0x43300000 Jun 30 02:12:31.121948 Loading: *################################################################# Jun 30 02:12:31.445709 ################################################################# Jun 30 02:12:31.772381 ################################################################# Jun 30 02:12:32.096330 ################################################################# Jun 30 02:12:32.420593 ################################################################# Jun 30 02:12:32.745528 ################################################################# Jun 30 02:12:33.069754 ################################################################# Jun 30 02:12:33.396670 ################################################################# Jun 30 02:12:33.720612 ################################################################# Jun 30 02:12:34.044682 ################################################################# Jun 30 02:12:34.368685 ################################################################# Jun 30 02:12:34.688534 ################################################################# Jun 30 02:12:35.012706 ################################################################# Jun 30 02:12:35.340517 ################################################################# Jun 30 02:12:35.652521 ################################################################# Jun 30 02:12:35.976768 ################################################################# Jun 30 02:12:36.288486 ################################################################# Jun 30 02:12:36.540520 ################################################################# Jun 30 02:12:36.794375 ################################################################# Jun 30 02:12:37.100523 ################################################################# Jun 30 02:12:37.424701 ################################################################# Jun 30 02:12:37.749719 ################################################################# Jun 30 02:12:38.077700 ################################################################# Jun 30 02:12:38.401701 ################################################################# Jun 30 02:12:38.717633 ################################################################# Jun 30 02:12:39.041732 ################################################################# Jun 30 02:12:39.353705 ################################################################# Jun 30 02:12:39.677692 ###################################### Jun 30 02:12:39.869667 2.8 MiB/s Jun 30 02:12:39.869722 done Jun 30 02:12:39.869768 Bytes transferred = 26310352 (19176d0 hex) Jun 30 02:12:39.869813 Retrieving file: /osstest/debian-installer/armhf/2024-03-26-bookworm/linux Jun 30 02:12:39.881707 Using asx0 device Jun 30 02:12:39.881754 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 02:12:39.896484 Filename '/osstest/debian-installer/armhf/2024-03-26-bookworm/linux'. Jun 30 02:12:39.896484 Load address: 0x42000000 Jun 30 02:12:39.896484 Loading: *################################################################# Jun 30 02:12:40.220435 ################################################################# Jun 30 02:12:40.548414 ################################################################# Jun 30 02:12:40.876487 ################################################################# Jun 30 02:12:41.200536 ################################################################# Jun 30 02:12:41.516574 ############################################# Jun 30 02:12:41.732520 2.7 MiB/s Jun 30 02:12:41.732520 done Jun 30 02:12:41.732520 Bytes transferred = 5423616 (52c200 hex) Jun 30 02:12:41.744606 append: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-metrocentre url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=47959 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-metrocentre--initrd.gz --- console=ttySAC2,115200n8 Jun 30 02:12:41.780623 Retrieving file: /osstest/debian-installer/armhf/2024-03-26-bookworm/dtbs/exynos5250-arndale.dtb Jun 30 02:12:41.792609 Using asx0 device Jun 30 02:12:41.792609 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 02:12:41.792609 Filename '/osstest/debian-installer/armhf/2024-03-26-bookworm/dtbs/exynos5250-arndale.dtb'. Jun 30 02:12:41.804759 Load address: 0x43000000 Jun 30 02:12:41.804814 Loading: *#### Jun 30 02:12:41.828591 2.5 MiB/s Jun 30 02:12:41.828591 done Jun 30 02:12:41.828591 Bytes transferred = 46686 (b65e hex) Jun 30 02:12:41.828591 Kernel image @ 0x42000000 [ 0x000000 - 0x52c200 ] Jun 30 02:12:41.828591 ## Flattened Device Tree blob at 43000000 Jun 30 02:12:41.840624 Booting using the fdt blob at 0x43000000 Jun 30 02:12:41.840624 Loading Ramdisk to 4e6e8000, end 4ffff6d0 ... OK Jun 30 02:12:42.264564 Loading Device Tree to 4e6d9000, end 4e6e765d ... OK Jun 30 02:12:42.276560 Jun 30 02:12:42.276560 Starting kernel ...(fake run for tracing) Jun 30 02:12:42.276560 Jun 30 02:12:42.276560 Jun 30 02:12:42.288543 Starting kernel ... Jun 30 02:12:42.288543 Jun 30 02:12:42.288543 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 02:12:48.389811 [ 0.000000] Linux version 6.1.0-18-armmp (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.76-1 (2024-02-01) Jun 30 02:12:48.401771 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 30 02:12:48.401866 [ 0.000000] CPU: div instructions available: patching division code Jun 30 02:12:48.413773 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 02:12:48.425748 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 02:12:48.425818 [ 0.000000] Memory policy: Data cache writealloc Jun 30 02:12:48.437760 [ 0.000000] efi: UEFI not found. Jun 30 02:12:48.437817 [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 Jun 30 02:12:48.437864 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 02:12:48.449748 [ 0.000000] Zone ranges: Jun 30 02:12:48.449804 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Jun 30 02:12:48.449853 [ 0.000000] Normal empty Jun 30 02:12:48.461760 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Jun 30 02:12:48.461822 [ 0.000000] Movable zone start for each node Jun 30 02:12:48.461868 [ 0.000000] Early memory node ranges Jun 30 02:12:48.473761 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 02:12:48.473822 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 02:12:48.485758 [ 0.000000] percpu: Embedded 18 pages/cpu s41620 r8192 d23916 u73728 Jun 30 02:12:48.485822 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Jun 30 02:12:48.497758 [ 0.000000] Kernel command line: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-metrocentre url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=47959 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-metrocentre--initrd.gz --- console=ttySAC2,115200n8 Jun 30 02:12:48.545771 [ 0.000000] Unknown kernel command line parameters "preseed --- vga=normal auto=true hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=47959 domain=test-lab.xenproject.org", will be passed to user space. Jun 30 02:12:48.581814 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Jun 30 02:12:48.581883 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 02:12:48.593773 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Jun 30 02:12:48.605765 [ 0.000000] Memory: 2015996K/2097152K available (11264K kernel code, 1696K rwdata, 3716K rodata, 2048K init, 378K bss, 64772K reserved, 16384K cma-reserved, 1294332K highmem) Jun 30 02:12:48.617770 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 02:12:48.617833 [ 0.000000] ftrace: allocating 39582 entries in 117 pages Jun 30 02:12:48.629775 [ 0.000000] ftrace: allocated 116 pages with 4 groups Jun 30 02:12:48.629835 [ 0.000000] trace event string verifier disabled Jun 30 02:12:48.641758 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 02:12:48.641819 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Jun 30 02:12:48.653758 [ 0.000000] Rude variant of Tasks RCU enabled. Jun 30 02:12:48.653819 [ 0.000000] Tracing variant of Tasks RCU enabled. Jun 30 02:12:48.653865 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Jun 30 02:12:48.665768 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 02:12:48.677757 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 02:12:48.677819 [ 0.000000] GIC: Using split EOI/Deactivate mode Jun 30 02:12:48.677866 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 02:12:48.689768 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 02:12:48.701755 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Jun 30 02:12:48.701819 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Jun 30 02:12:48.713769 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Jun 30 02:12:48.713838 [ 0.000019] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Jun 30 02:12:48.725787 [ 0.002634] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Jun 30 02:12:48.737758 [ 0.002648] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 02:12:48.737833 [ 0.002663] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 02:12:48.749778 [ 0.002674] Ignoring duplicate/late registration of read_current_timer delay Jun 30 02:12:48.761770 [ 0.003039] Console: colour dummy device 80x30 Jun 30 02:12:48.761829 [ 0.003080] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Jun 30 02:12:48.773766 [ 0.003093] CPU: Testing write buffer coherency: ok Jun 30 02:12:48.773826 [ 0.003134] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 02:12:48.785785 [ 0.003142] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 02:12:48.797771 [ 0.003148] pid_max: default: 32768 minimum: 301 Jun 30 02:12:48.797832 [ 0.003506] LSM: Security Framework initializing Jun 30 02:12:48.797879 [ 0.003577] landlock: Up and running. Jun 30 02:12:48.809762 [ 0.003581] Yama: disabled by default; enable with sysctl kernel.yama.* Jun 30 02:12:48.809826 [ 0.003769] AppArmor: AppArmor initialized Jun 30 02:12:48.821749 [ 0.003780] TOMOYO Linux initialized Jun 30 02:12:48.821808 [ 0.003822] LSM support for eBPF active Jun 30 02:12:48.821882 [ 0.004064] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 02:12:48.833775 [ 0.004078] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 02:12:48.833843 [ 0.005514] /cpus/cpu@0 missing clock-frequency property Jun 30 02:12:48.845761 [ 0.005542] /cpus/cpu@1 missing clock-frequency property Jun 30 02:12:48.845821 [ 0.005555] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 02:12:48.857763 [ 0.006505] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 02:12:48.857830 [ 0.006512] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 02:12:48.869756 [ 0.006614] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 02:12:48.881772 [ 0.006620] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 02:12:48.881834 [ 0.006766] Setting up static identity map for 0x40300000 - 0x403000ac Jun 30 02:12:48.893757 [ 0.007938] rcu: Hierarchical SRCU implementation. Jun 30 02:12:48.893818 [ 0.007944] rcu: Max phase no-delay instances is 1000. Jun 30 02:12:48.893866 [ 0.010075] EFI services will not be available. Jun 30 02:12:48.905752 [ 0.010416] smp: Bringing up secondary CPUs ... Jun 30 02:12:48.905811 [ 0.011149] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 02:12:48.917758 [ 0.011162] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 02:12:48.917831 [ 0.011291] smp: Brought up 1 node, 2 CPUs Jun 30 02:12:48.929754 [ 0.011299] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 02:12:48.929817 [ 0.011307] CPU: All CPU(s) started in HYP mode. Jun 30 02:12:48.941761 [ 0.011311] CPU: Virtualization extensions available. Jun 30 02:12:48.941822 [ 0.011936] devtmpfs: initialized Jun 30 02:12:48.941866 [ 0.023027] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 02:12:48.953789 [ 0.023281] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Jun 30 02:12:48.965766 [ 0.023305] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 02:12:48.965829 [ 0.023782] pinctrl core: initialized pinctrl subsystem Jun 30 02:12:48.977763 [ 0.024516] DMI not present or invalid. Jun 30 02:12:48.977822 [ 0.025197] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 02:12:48.989769 [ 0.030575] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 02:12:48.989833 [ 0.032135] audit: initializing netlink subsys (disabled) Jun 30 02:12:49.001756 [ 0.032342] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 Jun 30 02:12:49.001826 [ 0.033512] thermal_sys: Registered thermal governor 'fair_share' Jun 30 02:12:49.013756 [ 0.033519] thermal_sys: Registered thermal governor 'bang_bang' Jun 30 02:12:49.013819 [ 0.033524] thermal_sys: Registered thermal governor 'step_wise' Jun 30 02:12:49.025760 [ 0.033528] thermal_sys: Registered thermal governor 'user_space' Jun 30 02:12:49.025823 [ 0.033532] thermal_sys: Registered thermal governor 'power_allocator' Jun 30 02:12:49.037763 [ 0.033902] No ATAGs? Jun 30 02:12:49.037819 [ 0.033971] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jun 30 02:12:49.049765 [ 0.033979] hw-breakpoint: maximum watchpoint size is 8 bytes. Jun 30 02:12:49.049828 [ 0.035070] Serial: AMBA PL011 UART driver Jun 30 02:12:49.061755 [ 0.091492] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Jun 30 02:12:49.061827 [ 0.102426] iommu: Default domain type: Translated Jun 30 02:12:49.073754 [ 0.102434] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 02:12:49.073817 [ 0.103413] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Jun 30 02:12:49.085770 [ 0.103964] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 02:12:49.085830 [ 0.103976] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 02:12:49.097773 [ 0.104625] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 02:12:49.097846 [ 0.104656] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 02:12:49.109766 [ 0.104839] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 02:12:49.109826 [ 0.105196] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 02:12:49.121775 [ 0.105207] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 02:12:49.121838 [ 0.105603] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 02:12:49.133766 [ 0.105892] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 02:12:49.133826 [ 0.105901] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 02:12:49.145767 [ 0.106180] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 02:12:49.145828 [ 0.106279] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 02:12:49.157747 [ 0.106289] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 02:12:49.157810 [ 0.106488] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 02:12:49.157858 [ 0.106688] pps_core: LinuxPPS API ver. 1 registered Jun 30 02:12:49.169766 [ 0.106693] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 02:12:49.181756 [ 0.106709] PTP clock support registered Jun 30 02:12:49.181815 [ 0.108197] NetLabel: Initializing Jun 30 02:12:49.181860 [ 0.108203] NetLabel: domain hash size = 128 Jun 30 02:12:49.193759 [ 0.108208] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Jun 30 02:12:49.193822 [ 0.108281] NetLabel: unlabeled traffic allowed by default Jun 30 02:12:49.205757 [ 0.108441] vgaarb: loaded Jun 30 02:12:49.205814 [ 0.109114] clocksource: Switched to clocksource mct-frc Jun 30 02:12:49.205862 [ 0.178022] VFS: Disk quotas dquot_6.6.0 Jun 30 02:12:49.217770 [ 0.178114] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jun 30 02:12:49.217835 [ 0.178849] AppArmor: AppArmor Filesystem Enabled Jun 30 02:12:49.217882 [ 0.187937] NET: Registered PF_INET protocol family Jun 30 02:12:49.229769 [ 0.188147] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Jun 30 02:12:49.241752 [ 0.189784] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 02:12:49.241791 [ 0.189876] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 02:12:49.253764 [ 0.189900] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Jun 30 02:12:49.265749 [ 0.189995] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Jun 30 02:12:49.265820 [ 0.190223] TCP: Hash tables configured (established 8192 bind 8192) Jun 30 02:12:49.277764 [ 0.190446] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Jun 30 02:12:49.277832 [ 0.190532] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 02:12:49.289762 [ 0.190571] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 02:12:49.289826 [ 0.190773] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 02:12:49.301768 [ 0.190807] NET: Registered PF_XDP protocol family Jun 30 02:12:49.301828 [ 0.190817] PCI: CLS 0 bytes, default 64 Jun 30 02:12:49.313765 [ 0.191336] Trying to unpack rootfs image as initramfs... Jun 30 02:12:49.313826 [ 0.191750] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Jun 30 02:12:49.325770 [ 0.191960] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Jun 30 02:12:49.325839 [ 0.193589] Initialise system trusted keyrings Jun 30 02:12:49.337766 [ 0.193667] Key type blacklist registered Jun 30 02:12:49.337825 [ 0.193903] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Jun 30 02:12:49.349764 [ 0.201084] zbud: loaded Jun 30 02:12:49.349820 [ 0.202248] integrity: Platform Keyring initialized Jun 30 02:12:49.349868 [ 0.202276] integrity: Machine keyring initialized Jun 30 02:12:49.361777 [ 0.202284] Key type asymmetric registered Jun 30 02:12:49.361838 [ 0.202290] Asymmetric key parser 'x509' registered Jun 30 02:12:49.361884 [ 1.562727] Freeing initrd memory: 25696K Jun 30 02:12:49.373759 [ 1.574638] alg: self-tests for CTR-KDF (hmac(sha256)) passed Jun 30 02:12:49.373822 [ 1.574926] bounce: pool size: 64 pages Jun 30 02:12:49.373867 [ 1.575090] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Jun 30 02:12:49.385771 [ 1.575253] io scheduler mq-deadline registered Jun 30 02:12:49.385830 [ 1.580423] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Jun 30 02:12:49.397773 [ 1.601340] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 02:12:49.409759 [ 1.601351] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 02:12:49.421763 [ 1.603655] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 02:12:49.421833 [ 1.603664] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 02:12:49.433769 [ 1.604453] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 02:12:49.445763 [ 1.604462] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 02:12:49.445835 [ 1.605350] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 02:12:49.457764 [ 1.605359] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 02:12:49.469778 [ 1.607693] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 02:12:49.481756 [ 1.610516] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 02:12:49.481821 [ 1.613286] Serial: AMBA driver Jun 30 02:12:49.481866 [ 1.613539] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 02:12:49.493776 [ 1.614039] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 02:12:49.505774 [ 1.614487] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 02:12:49.505844 [ 2.745378] printk: console [ttySAC2] enabled Jun 30 02:12:49.517768 [ 2.750193] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Jun 30 02:12:49.529678 [ 2.760870] STM32 USART driver initialized Jun 30 02:12:49.529738 [ 2.775019] mousedev: PS/2 mouse device common for all mice Jun 30 02:12:49.541731 [ 2.813380] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 02:12:49.577756 [ 2.821981] s5m-rtc s5m-rtc: setting system clock to 2000-01-02T00:00:31 UTC (946771231) Jun 30 02:12:49.589752 [ 2.831768] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Jun 30 02:12:49.601764 [ 2.839238] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 02:12:49.613730 [ 2.847205] NET: Registered PF_INET6 protocol family Jun 30 02:12:49.613791 [ 2.861038] Segment Routing with IPv6 Jun 30 02:12:49.625725 [ 2.863331] In-situ OAM (IOAM) with IPv6 Jun 30 02:12:49.637755 [ 2.867230] mip6: Mobile IPv6 Jun 30 02:12:49.637812 [ 2.870136] NET: Registered PF_PACKET protocol family Jun 30 02:12:49.637865 [ 2.875292] mpls_gso: MPLS GSO support Jun 30 02:12:49.649765 [ 2.879478] ThumbEE CPU extension supported. Jun 30 02:12:49.649824 [ 2.883159] Registering SWP/SWPB emulation handler Jun 30 02:12:49.649871 [ 2.888374] registered taskstats version 1 Jun 30 02:12:49.661731 [ 2.892036] Loading compiled-in X.509 certificates Jun 30 02:12:49.661791 [ 3.348295] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Jun 30 02:12:50.117949 [ 3.355642] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Jun 30 02:12:50.129891 [ 3.366660] zswap: loaded using pool lzo/zbud Jun 30 02:12:50.141770 [ 3.370679] Key type .fscrypt registered Jun 30 02:12:50.141830 [ 3.373965] Key type fscrypt-provisioning registered Jun 30 02:12:50.141877 [ 3.387862] Key type encrypted registered Jun 30 02:12:50.153730 [ 3.390455] AppArmor: AppArmor sha1 policy hashing enabled Jun 30 02:12:50.165762 [ 3.395915] ima: No TPM chip found, activating TPM-bypass! Jun 30 02:12:50.165824 [ 3.401377] ima: Allocated hash algorithm: sha256 Jun 30 02:12:50.177782 [ 3.406098] ima: No architecture policies found Jun 30 02:12:50.177843 [ 3.410610] evm: Initialising EVM extended attributes: Jun 30 02:12:50.177891 [ 3.415681] evm: security.selinux Jun 30 02:12:50.189759 [ 3.418971] evm: security.SMACK64 (disabled) Jun 30 02:12:50.189818 [ 3.423222] evm: security.SMACK64EXEC (disabled) Jun 30 02:12:50.189865 [ 3.427822] evm: security.SMACK64TRANSMUTE (disabled) Jun 30 02:12:50.201772 [ 3.432856] evm: security.SMACK64MMAP (disabled) Jun 30 02:12:50.201832 [ 3.437457] evm: security.apparmor Jun 30 02:12:50.201876 [ 3.440827] evm: security.ima Jun 30 02:12:50.213749 [ 3.443792] evm: security.capability Jun 30 02:12:50.213808 [ 3.447357] evm: HMAC attrs: 0x1 Jun 30 02:12:50.213852 [ 4.030888] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 02:12:50.801833 [ 4.057286] Freeing unused kernel image (initmem) memory: 2048K Jun 30 02:12:50.825805 [ 4.062153] Checked W+X mappings: passed, no W+X pages found Jun 30 02:12:50.837788 [ 4.067414] Run /init as init process Jun 30 02:12:50.837836 [ 4.633059] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 02:12:51.401832 [ 4.704036] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 02:12:51.473779 [ 4.711665] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 02:12:51.485754 [ 4.724189] usbcore: registered new interface driver usbfs Jun 30 02:12:51.497771 [ 4.731635] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 02:12:51.509727 [ 4.746589] usbcore: registered new interface driver hub Jun 30 02:12:51.521662 [ 4.752528] usbcore: registered new device driver usb Jun 30 02:12:51.521696 [ 4.766236] phy phy-12130000.phy.3: phy_power_on was called before phy_init Jun 30 02:12:51.533712 [ 4.776590] phy phy-12130000.phy.3: phy_power_on was called before phy_init Jun 30 02:12:51.545781 [ 4.782175] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 02:12:51.557696 [ 4.787609] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Jun 30 02:12:51.557734 [ 4.798047] exynos-ohci 12120000.usb: USB Host Controller Jun 30 02:12:51.569707 [ 4.802871] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Jun 30 02:12:51.581755 [ 4.810883] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Jun 30 02:12:51.581820 [ 4.818035] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Jun 30 02:12:51.593684 [ 4.836800] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 02:12:51.605714 [ 4.860341] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 02:12:51.629750 [ 4.869080] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 02:12:51.641772 [ 4.875963] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 02:12:51.653761 [ 4.883104] usb usb1: Product: EHCI Host Controller Jun 30 02:12:51.653821 [ 4.887973] usb usb1: Manufacturer: Linux 6.1.0-18-armmp ehci_hcd Jun 30 02:12:51.665768 [ 4.894040] usb usb1: SerialNumber: 12110000.usb Jun 30 02:12:51.665830 [ 4.908782] VDD_ALIVE_1.0V: Bringing 1000000uV into 1100000-1100000uV Jun 30 02:12:51.677754 [ 4.961176] usb3503 usb-hub: switched to HUB mode Jun 30 02:12:51.726000 [ 4.964438] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 02:12:51.737726 [ 4.995606] hub 1-0:1.0: USB hub found Jun 30 02:12:51.761740 [ 4.997970] hub 1-0:1.0: 3 ports detected Jun 30 02:12:51.773826 [ 5.004286] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Jun 30 02:12:51.773900 [ 5.011133] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 02:12:51.785768 [ 5.018332] usb usb2: Product: USB Host Controller Jun 30 02:12:51.785827 [ 5.023083] usb usb2: Manufacturer: Linux 6.1.0-18-armmp ohci_hcd Jun 30 02:12:51.797731 [ 5.029160] usb usb2: SerialNumber: 12120000.usb Jun 30 02:12:51.797791 [ 5.090773] hub 2-0:1.0: USB hub found Jun 30 02:12:51.857725 [ 5.097351] hub 2-0:1.0: 3 ports detected Jun 30 02:12:51.869698 [ 5.159842] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 02:12:51.929756 [ 5.163929] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 02:12:51.941816 [ 5.172046] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 Jun 30 02:12:51.941887 [ 5.180961] xhci-hcd xhci-hcd.2.auto: irq 108, io mem 0x12000000 Jun 30 02:12:51.953770 [ 5.187127] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 02:12:51.953831 [ 5.192366] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 02:12:51.965776 [ 5.200001] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 02:12:51.977744 [ 5.206675] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 02:12:51.977815 [ 5.214759] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 02:12:51.989792 [ 5.221954] usb usb3: Product: xHCI Host Controller Jun 30 02:12:51.989852 [ 5.226829] usb usb3: Manufacturer: Linux 6.1.0-18-armmp xhci-hcd Jun 30 02:12:52.001862 [ 5.232898] usb usb3: SerialNumber: xhci-hcd.2.auto Jun 30 02:12:52.001923 [ 5.238441] hub 3-0:1.0: USB hub found Jun 30 02:12:52.013734 [ 5.241535] hub 3-0:1.0: 1 port detected Jun 30 02:12:52.013795 [ 5.245891] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 02:12:52.029785 [ 5.253597] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Jun 30 02:12:52.029857 [ 5.261717] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 02:12:52.029912 [ 5.268913] usb usb4: Product: xHCI Host Controller Jun 30 02:12:52.041775 [ 5.273789] usb usb4: Manufacturer: Linux 6.1.0-18-armmp xhci-hcd Jun 30 02:12:52.041838 [ 5.279855] usb usb4: SerialNumber: xhci-hcd.2.auto Jun 30 02:12:52.053763 [ 5.285393] hub 4-0:1.0: USB hub found Jun 30 02:12:52.053818 [ 5.288464] hub 4-0:1.0: 1 port detected Jun 30 02:12:52.053864 [ 5.297896] usb 1-3: new high-speed USB device number 2 using exynos-ehci Jun 30 02:12:52.065746 [ 5.461578] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Jun 30 02:12:52.233794 [ 5.468327] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jun 30 02:12:52.245808 [ 5.476794] hub 1-3:1.0: USB hub found Jun 30 02:12:52.245866 [ 5.479325] hub 1-3:1.0: 3 ports detected Jun 30 02:12:52.245912 Starting system log daemon: syslogd, klogd. Jun 30 02:12:52.389733 /var/run/utmp: No such file or directory Jun 30 02:12:54.225747 [?1h=(B   Jun 30 02:12:54.273761  Jun 30 02:12:54.285758 [  (-*) ][ Jan 02  0:00 ] Jun 30 02:12:54.297768 [  (0*start) ][ Jan 02  0:00 ] Jun 30 02:12:54.309763 [  (0*start) ][ Jan 02  0:00 ] Jun 30 02:12:54.321795 [  (0*start) ][ Jan 02  0:00 ] Jun 30 02:12:54.333773 [  (0*start) ][ Jan 02  0:00 ]                        [  (0*start) ][ Jan 02  0:00 ][  (0*start) ][ Jan 02  0:00 ] Jun 30 02:12:54.393761 [ 0- start  (2*shell) ][ Jan 02  0:00 ] Jun 30 02:12:54.405769 [ 0- start  (2*shell) ][ Jan 02  0:00 ] Jun 30 02:12:54.417767 [ 0- start  (2*shell) ][ Jan 02  0:00 ] Jun 30 02:12:54.429776 [ 0- start  (2*shell) ][ Jan 02  0:00 ]                        [ 0- start  (2*shell) ][ Jan 02  0:00 ][ 0- start  (2*shell) ][ Jan 02  0:00 ] Jun 30 02:12:54.489773 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:00 ] Jun 30 02:12:54.501772 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:00 ] Jun 30 02:12:54.513781 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:00 ] Jun 30 02:12:54.525789 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:00 ]                        [ 0 start 2- shell  (3*shell) ][ Jan 02  0:00 ][ 0 start 2- shell  (3*shell) ][ Jan 02  0:00 ] Jun 30 02:12:54.585775 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:00 ] Jun 30 02:12:54.597765 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:00 ] Jun 30 02:12:54.609786 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:00 ] Jun 30 02:12:54.621780 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:00 ]                        [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:00 ][ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:00 ] Jun 30 02:12:54.681803 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Jun 30 02:12:54.693775 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Jun 30 02:12:54.705779 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Jun 30 02:12:54.717783 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:00 ]                        [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:00 ][ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Jun 30 02:12:54.777772 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Jun 30 02:12:54.789781 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Jun 30 02:12:54.801776 [  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Jun 30 02:12:55.257778 Detecting network hardware ... 2%... 95%... 100% Jun 30 02:12:57.021715 Detecting link on eth0; please wait... ... 0%... 10%... 20% Jun 30 02:13:01.921771 Waiting for link-local address... ... 8%... 16%... 25%... 33%... 41%... 100% Jun 30 02:13:03.208690 Attempting IPv6 autoconfiguration... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 75%... 83%... 91%... 100% Jun 30 02:13:09.289771 Configuring the network with DHCP ... 0%... 100% Jun 30 02:13:12.445738 [  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:01 ] Checking the Debian archive mirror ... 25%... 50%... 75%... 100% Jun 30 02:13:20.713725 Loading additional components ... 0%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Jun 30 02:13:54.893721 Setting up the clock ... 0%... 3%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  2:13 ]... 100% Jun 30 02:13:57.701943 Loading additional components ... 50%... 100% Jun 30 02:13:59.393811 [  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  2:14 ] Detecting disks and all other hardware ... 2%... 95%... 100% Jun 30 02:14:06.305734 Loading additional components ... 5%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Jun 30 02:14:15.021723 Loading additional components ... 25%... 50%... 75%... 100% Jun 30 02:14:17.421679 Starting up the partitioner ... 4%... 13%... 21%... 30%... 43%... 52%... 60%... 73%... 82%... 91%... 100% Jun 30 02:14:28.345626 Guided partitioning ... 16%... 33%... 50%... 66%... 83%... 100% Jun 30 02:14:36.941717 Starting up the partitioner ... 4%... 12%... 20%... 32%... 40%... 52%... 60%... 72%... 80%... 92%... 100% Jun 30 02:14:50.513764 [  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  2:15 ] Partitions formatting ... 33% Jun 30 02:15:02.985765 Partitions formatting Jun 30 02:15:12.481721 Partitions formatting Installing the base system ... 0%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  2:16 ]... 17%... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  2:17 ]... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  2:18 ]... 48%... 50%...  Jun 30 02:18:59.493759  60%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  2:19 ]... 70%... 79%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  2:20 ]... 83%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  2:21 ][  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  2:22 ]... 91%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  2:23 ]... 100% Jun 30 02:23:24.745764 Configuring apt ... 7%... 14%... 14%... 21%... 35%... 42%... 50%... 61%... 71%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  2:24 ]. Jun 30 02:24:02.253758 ... 82%... 92%... 100% Jun 30 02:24:04.905740 Select and install software ... 1%... 10%... 13%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  2:25 ]... 20%... 30%... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  2:26 ]... 50%... Jun 30 02:26:50.769772 . 60%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  2:27 ]... 70%... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  2:28 ]... 88%... 90%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  2:29 ]... 94%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  2:30 ]... 100% Jun 30 02:30:07.585624 Finishing the installation ... 4%... 12%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  2:31 ]... 16%... 20%... 32%... 40%... 44%... Jun 30 02:31:54.965639  52%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  2:32 ]... 60%... 72%... 80%... 92% The system is going down NOW! Sent SIGKILL to all processes Jun 30 02:32:05.885708 Requesting system reboot Jun 30 02:32:05.885780 [ 1160.153529] reboot: Re˙ Jun 30 02:32:07.241689 Jun 30 02:32:07.241749 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 02:32:07.253744 Jun 30 02:32:07.253797 CPU: Exynos5250@1000MHz Jun 30 02:32:07.253876 Jun 30 02:32:07.253916 Board: Arndale Jun 30 02:32:07.253957 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 02:32:07.265701 ready Jun 30 02:32:07.265754 DRAM: 2 GiB Jun 30 02:32:07.265794 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 02:32:07.277733 trace: enabled Jun 30 02:32:07.313674 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 02:32:07.673691 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 02:32:07.733719 In: serial Jun 30 02:32:07.733772 Out: serial Jun 30 02:32:07.745682 Err: serial Jun 30 02:32:07.745712 SCSI: ARNDALE SCSI INIT Jun 30 02:32:07.745735 Target spinup took 0 ms. Jun 30 02:32:07.745758 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 02:32:07.757718 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 02:32:07.757775 Net: Net Initialization Skipped Jun 30 02:32:07.757818 No ethernet found. Jun 30 02:32:07.769614 Hostname: arndale-metrocentre Jun 30 02:32:07.769641 Hit any key to stop autoboot: 2  1  0 Jun 30 02:32:09.689786 (Re)start USB... Jun 30 02:32:09.689859 USB0: USB EHCI 1.00 Jun 30 02:32:09.701706 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 02:32:15.296614 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 02:32:15.296614 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 02:32:15.744601 Waiting for Ethernet connection... done. Jun 30 02:32:17.340563 BOOTP broadcast 1 Jun 30 02:32:17.340563 BOOTP broadcast 2 Jun 30 02:32:18.360625 DHCP client bound to address 10.149.64.44 (1062 ms) Jun 30 02:32:18.360625 Using asx0 device Jun 30 02:32:18.372875 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 02:32:18.372967 Filename 'pxelinux.0'. Jun 30 02:32:18.373015 Load address: 0x43e00000 Jun 30 02:32:18.373057 Loading: *### Jun 30 02:32:18.396822 2.4 MiB/s Jun 30 02:32:18.396878 done Jun 30 02:32:18.396918 Bytes transferred = 42430 (a5be hex) Jun 30 02:32:18.396962 missing environment variable: pxeuuid Jun 30 02:32:18.397006 Retrieving file: pxelinux.cfg/0A95402C Jun 30 02:32:18.408739 Using asx0 device Jun 30 02:32:18.408769 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 02:32:18.408821 Filename 'pxelinux.cfg/0A95402C'. Jun 30 02:32:18.420778 Load address: 0x51000000 Jun 30 02:32:18.420812 Loading: *# Jun 30 02:32:18.420835 31.3 KiB/s Jun 30 02:32:18.420857 done Jun 30 02:32:18.420878 Bytes transferred = 65 (41 hex) Jun 30 02:32:18.420901 Config file found Jun 30 02:32:18.420923 Ignoring unknown command: serial Jun 30 02:32:18.432771 1: local Jun 30 02:32:18.432833 scanning bus for devices... Jun 30 02:32:18.432877 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 02:32:18.456773 Type: Hard Disk Jun 30 02:32:18.456804 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 02:32:18.456832 Found 1 device(s). Jun 30 02:32:18.456854 Jun 30 02:32:18.456875 SCSI device 0: Jun 30 02:32:18.468754 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 02:32:18.468822 Type: Hard Disk Jun 30 02:32:18.468865 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 02:32:18.480738 ... is now current device Jun 30 02:32:18.480769 Scanning scsi 0... Jun 30 02:32:18.480792 Found U-Boot script /boot.scr Jun 30 02:32:18.600662 641 bytes read in 39 ms (15.6 KiB/s) Jun 30 02:32:18.636795 ## Executing script at 50000000 Jun 30 02:32:18.636854 Loading dtbs/exynos5250-arndale.dtb Jun 30 02:32:18.648697 46686 bytes read in 540 ms (84 KiB/s) Jun 30 02:32:19.192727 Loading vmlinuz-6.1.0-22-armmp-lpae Jun 30 02:32:19.192769 5505536 bytes read in 189 ms (27.8 MiB/s) Jun 30 02:32:19.396775 Loading initrd.img-6.1.0-22-armmp-lpae Jun 30 02:32:19.396837 25721018 bytes read in 1883 ms (13 MiB/s) Jun 30 02:32:21.229721 Booting Jun 30 02:32:21.229762 Kernel image @ 0x42000000 [ 0x000000 - 0x540200 ] Jun 30 02:32:21.229788 ## Flattened Device Tree blob at 43000000 Jun 30 02:32:21.241701 Booting using the fdt blob at 0x43000000 Jun 30 02:32:21.241734 Loading Ramdisk to 4e778000, end 4ffff8ba ... OK Jun 30 02:32:21.661734 Loading Device Tree to 4e769000, end 4e77765d ... OK Jun 30 02:32:21.661799 Jun 30 02:32:21.673720 Starting kernel ...(fake run for tracing) Jun 30 02:32:21.673771 Jun 30 02:32:21.673809 Jun 30 02:32:21.673846 Starting kernel ... Jun 30 02:32:21.673886 Jun 30 02:32:21.673923 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 02:32:27.821627 [ 0.000000] Linux version 6.1.0-22-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.94-1 (2024-06-21) Jun 30 02:32:27.845774 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=30c5387d Jun 30 02:32:27.845838 [ 0.000000] CPU: div instructions available: patching division code Jun 30 02:32:27.857760 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 02:32:27.869723 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 02:32:27.869787 [ 0.000000] Memory policy: Data cache writealloc Jun 30 02:32:27.881762 [ 0.000000] efi: UEFI not found. Jun 30 02:32:27.881821 [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000 Jun 30 02:32:27.881869 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 02:32:27.893763 [ 0.000000] Zone ranges: Jun 30 02:32:27.893820 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Jun 30 02:32:27.893870 [ 0.000000] Normal empty Jun 30 02:32:27.905764 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Jun 30 02:32:27.905827 [ 0.000000] Movable zone start for each node Jun 30 02:32:27.905874 [ 0.000000] Early memory node ranges Jun 30 02:32:27.917720 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 02:32:27.917754 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 02:32:27.929766 [ 0.000000] percpu: Embedded 18 pages/cpu s44756 r8192 d20780 u73728 Jun 30 02:32:27.929831 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Jun 30 02:32:27.941687 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=ttySAC2,115200n8 Jun 30 02:32:27.953729 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Jun 30 02:32:27.953766 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 02:32:27.965777 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Jun 30 02:32:27.977789 [ 0.000000] Memory: 2015520K/2097152K available (12288K kernel code, 1714K rwdata, 3748K rodata, 2048K init, 382K bss, 65248K reserved, 16384K cma-reserved, 1294332K highmem) Jun 30 02:32:27.989768 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 02:32:28.001760 [ 0.000000] ftrace: allocating 39982 entries in 118 pages Jun 30 02:32:28.001823 [ 0.000000] ftrace: allocated 118 pages with 5 groups Jun 30 02:32:28.001872 [ 0.000000] trace event string verifier disabled Jun 30 02:32:28.013764 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 02:32:28.013825 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Jun 30 02:32:28.025759 [ 0.000000] Rude variant of Tasks RCU enabled. Jun 30 02:32:28.025820 [ 0.000000] Tracing variant of Tasks RCU enabled. Jun 30 02:32:28.025868 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Jun 30 02:32:28.037773 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 02:32:28.049667 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 02:32:28.049701 [ 0.000000] GIC: Using split EOI/Deactivate mode Jun 30 02:32:28.049728 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 02:32:28.061817 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 02:32:28.073749 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Jun 30 02:32:28.073812 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Jun 30 02:32:28.085779 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Jun 30 02:32:28.085847 [ 0.000019] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Jun 30 02:32:28.097780 [ 0.002647] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Jun 30 02:32:28.109734 [ 0.002661] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 02:32:28.121698 [ 0.002676] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 02:32:28.121737 [ 0.002687] Ignoring duplicate/late registration of read_current_timer delay Jun 30 02:32:28.133804 [ 0.003046] Console: colour dummy device 80x30 Jun 30 02:32:28.133864 [ 0.003087] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Jun 30 02:32:28.145780 [ 0.003100] CPU: Testing write buffer coherency: ok Jun 30 02:32:28.145840 [ 0.003142] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 02:32:28.157781 [ 0.003150] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 02:32:28.169727 [ 0.003157] pid_max: default: 32768 minimum: 301 Jun 30 02:32:28.169787 [ 0.003514] LSM: Security Framework initializing Jun 30 02:32:28.169834 [ 0.003585] landlock: Up and running. Jun 30 02:32:28.181763 [ 0.003590] Yama: disabled by default; enable with sysctl kernel.yama.* Jun 30 02:32:28.181827 [ 0.003773] AppArmor: AppArmor initialized Jun 30 02:32:28.193763 [ 0.003786] TOMOYO Linux initialized Jun 30 02:32:28.193821 [ 0.003831] LSM support for eBPF active Jun 30 02:32:28.193867 [ 0.004075] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 02:32:28.205775 [ 0.004089] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 02:32:28.217758 [ 0.005498] /cpus/cpu@0 missing clock-frequency property Jun 30 02:32:28.217820 [ 0.005526] /cpus/cpu@1 missing clock-frequency property Jun 30 02:32:28.217868 [ 0.005539] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 02:32:28.229788 [ 0.006483] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 02:32:28.229855 [ 0.006490] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 02:32:28.241762 [ 0.006591] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 02:32:28.253772 [ 0.006597] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 02:32:28.253834 [ 0.006737] Setting up static identity map for 0x40400000 - 0x404000ac Jun 30 02:32:28.265760 [ 0.007898] rcu: Hierarchical SRCU implementation. Jun 30 02:32:28.265821 [ 0.007904] rcu: Max phase no-delay instances is 1000. Jun 30 02:32:28.265869 [ 0.010031] EFI services will not be available. Jun 30 02:32:28.277756 [ 0.010376] smp: Bringing up secondary CPUs ... Jun 30 02:32:28.277816 [ 0.011112] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 02:32:28.289765 [ 0.011125] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 02:32:28.289838 [ 0.011265] smp: Brought up 1 node, 2 CPUs Jun 30 02:32:28.301760 [ 0.011274] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 02:32:28.301822 [ 0.011281] CPU: All CPU(s) started in HYP mode. Jun 30 02:32:28.313765 [ 0.011285] CPU: Virtualization extensions available. Jun 30 02:32:28.313826 [ 0.012154] devtmpfs: initialized Jun 30 02:32:28.313871 [ 0.022954] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 02:32:28.325704 [ 0.023187] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Jun 30 02:32:28.337797 [ 0.023210] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 02:32:28.337861 [ 0.023751] pinctrl core: initialized pinctrl subsystem Jun 30 02:32:28.349766 [ 0.024497] DMI not present or invalid. Jun 30 02:32:28.349824 [ 0.025179] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 02:32:28.361761 [ 0.026725] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 02:32:28.361826 [ 0.028217] audit: initializing netlink subsys (disabled) Jun 30 02:32:28.373758 [ 0.028424] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 Jun 30 02:32:28.373826 [ 0.029608] thermal_sys: Registered thermal governor 'fair_share' Jun 30 02:32:28.385765 [ 0.029615] thermal_sys: Registered thermal governor 'bang_bang' Jun 30 02:32:28.385826 [ 0.029619] thermal_sys: Registered thermal governor 'step_wise' Jun 30 02:32:28.397764 [ 0.029624] thermal_sys: Registered thermal governor 'user_space' Jun 30 02:32:28.397826 [ 0.029629] thermal_sys: Registered thermal governor 'power_allocator' Jun 30 02:32:28.409793 [ 0.029825] No ATAGs? Jun 30 02:32:28.409849 [ 0.029893] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jun 30 02:32:28.421768 [ 0.029901] hw-breakpoint: maximum watchpoint size is 8 bytes. Jun 30 02:32:28.421830 [ 0.030989] Serial: AMBA PL011 UART driver Jun 30 02:32:28.433760 [ 0.080539] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 30 02:32:28.433829 [ 0.087452] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Jun 30 02:32:28.445783 [ 0.091698] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages Jun 30 02:32:28.457763 [ 0.091707] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page Jun 30 02:32:28.457827 [ 0.098701] iommu: Default domain type: Translated Jun 30 02:32:28.457875 [ 0.098709] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 02:32:28.469774 [ 0.099692] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Jun 30 02:32:28.469837 [ 0.100226] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 02:32:28.481766 [ 0.100237] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 02:32:28.481828 [ 0.100743] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 02:32:28.493778 [ 0.100773] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 02:32:28.505780 [ 0.100976] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 02:32:28.505841 [ 0.101333] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 02:32:28.517751 [ 0.101343] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 02:32:28.517812 [ 0.101733] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 02:32:28.529686 [ 0.102026] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 02:32:28.529719 [ 0.102037] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 02:32:28.529745 [ 0.102329] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 02:32:28.541762 [ 0.102430] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 02:32:28.541822 [ 0.102439] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 02:32:28.553759 [ 0.102618] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 02:32:28.553820 [ 0.102834] pps_core: LinuxPPS API ver. 1 registered Jun 30 02:32:28.565770 [ 0.102839] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 02:32:28.565842 [ 0.102855] PTP clock support registered Jun 30 02:32:28.577762 [ 0.104450] NetLabel: Initializing Jun 30 02:32:28.577819 [ 0.104456] NetLabel: domain hash size = 128 Jun 30 02:32:28.577866 [ 0.104461] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Jun 30 02:32:28.589767 [ 0.104516] NetLabel: unlabeled traffic allowed by default Jun 30 02:32:28.589828 [ 0.104694] vgaarb: loaded Jun 30 02:32:28.601778 [ 0.105698] clocksource: Switched to clocksource mct-frc Jun 30 02:32:28.601841 [ 0.106297] VFS: Disk quotas dquot_6.6.0 Jun 30 02:32:28.601887 [ 0.106383] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jun 30 02:32:28.613761 [ 0.107189] AppArmor: AppArmor Filesystem Enabled Jun 30 02:32:28.613821 [ 0.117129] NET: Registered PF_INET protocol family Jun 30 02:32:28.625762 [ 0.117329] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Jun 30 02:32:28.625829 [ 0.118790] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 02:32:28.637780 [ 0.118891] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 02:32:28.649762 [ 0.118916] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Jun 30 02:32:28.649830 [ 0.119016] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Jun 30 02:32:28.661778 [ 0.119247] TCP: Hash tables configured (established 8192 bind 8192) Jun 30 02:32:28.661840 [ 0.119489] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Jun 30 02:32:28.673772 [ 0.119582] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 02:32:28.685777 [ 0.119621] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 02:32:28.685843 [ 0.119850] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 02:32:28.697743 [ 0.119889] NET: Registered PF_XDP protocol family Jun 30 02:32:28.697805 [ 0.119900] PCI: CLS 0 bytes, default 64 Jun 30 02:32:28.697851 [ 0.120394] Trying to unpack rootfs image as initramfs... Jun 30 02:32:28.709770 [ 0.120757] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Jun 30 02:32:28.709839 [ 0.126230] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Jun 30 02:32:28.721778 [ 0.190764] Initialise system trusted keyrings Jun 30 02:32:28.733701 [ 0.190840] Key type blacklist registered Jun 30 02:32:28.733734 [ 0.192061] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Jun 30 02:32:28.733762 [ 0.199929] zbud: loaded Jun 30 02:32:28.745745 [ 0.201841] integrity: Platform Keyring initialized Jun 30 02:32:28.745806 [ 0.201891] integrity: Machine keyring initialized Jun 30 02:32:28.745853 [ 0.201901] Key type asymmetric registered Jun 30 02:32:28.757760 [ 0.201908] Asymmetric key parser 'x509' registered Jun 30 02:32:28.757820 [ 1.422507] Freeing initrd memory: 25120K Jun 30 02:32:28.757866 [ 1.444684] alg: self-tests for CTR-KDF (hmac(sha256)) passed Jun 30 02:32:28.769785 [ 1.444951] bounce: pool size: 64 pages Jun 30 02:32:28.769844 [ 1.445139] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Jun 30 02:32:28.781785 [ 1.445307] io scheduler mq-deadline registered Jun 30 02:32:28.781844 [ 1.450480] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Jun 30 02:32:28.793764 [ 1.471489] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 02:32:28.805768 [ 1.471500] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 02:32:28.805840 [ 1.473833] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 02:32:28.817781 [ 1.473843] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 02:32:28.829755 [ 1.474658] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 02:32:28.829822 [ 1.474667] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 02:32:28.841783 [ 1.475506] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 02:32:28.853769 [ 1.475515] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 02:32:28.865749 [ 1.477875] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 02:32:28.865840 [ 1.480664] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 02:32:28.877648 [ 1.483432] Serial: AMBA driver Jun 30 02:32:28.877679 [ 1.483656] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 02:32:28.889767 [ 1.484132] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 02:32:28.901780 [ 1.484599] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 02:32:28.901852 [ 2.565407] printk: console [ttySAC2] enabled Jun 30 02:32:28.913908 [ 2.570248] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Jun 30 02:32:28.913980 [ 2.580877] STM32 USART driver initialized Jun 30 02:32:28.925788 [ 2.595311] mousedev: PS/2 mouse device common for all mice Jun 30 02:32:28.937745 [ 2.632060] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 02:32:28.973831 [ 2.640689] s5m-rtc s5m-rtc: setting system clock to 2024-06-30T02:32:30 UTC (1719714750) Jun 30 02:32:28.985644 [ 2.650549] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Jun 30 02:32:28.997711 [ 2.658039] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 02:32:28.997774 [ 2.666037] NET: Registered PF_INET6 protocol family Jun 30 02:32:29.009652 [ 2.690118] Segment Routing with IPv6 Jun 30 02:32:29.033762 [ 2.692362] In-situ OAM (IOAM) with IPv6 Jun 30 02:32:29.033820 [ 2.696350] mip6: Mobile IPv6 Jun 30 02:32:29.033863 [ 2.699206] NET: Registered PF_PACKET protocol family Jun 30 02:32:29.045763 [ 2.704371] mpls_gso: MPLS GSO support Jun 30 02:32:29.045822 [ 2.708397] ThumbEE CPU extension supported. Jun 30 02:32:29.057764 [ 2.712215] Registering SWP/SWPB emulation handler Jun 30 02:32:29.057826 [ 2.717474] registered taskstats version 1 Jun 30 02:32:29.057871 [ 2.721091] Loading compiled-in X.509 certificates Jun 30 02:32:29.069644 [ 3.181776] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Jun 30 02:32:29.525816 [ 3.189091] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Jun 30 02:32:29.537720 [ 3.200173] zswap: loaded using pool lzo/zbud Jun 30 02:32:29.537752 [ 3.204121] Key type .fscrypt registered Jun 30 02:32:29.549669 [ 3.207424] Key type fscrypt-provisioning registered Jun 30 02:32:29.549701 [ 3.231919] Key type encrypted registered Jun 30 02:32:29.573771 [ 3.234514] AppArmor: AppArmor sha1 policy hashing enabled Jun 30 02:32:29.585732 [ 3.239982] ima: No TPM chip found, activating TPM-bypass! Jun 30 02:32:29.585766 [ 3.245441] ima: Allocated hash algorithm: sha256 Jun 30 02:32:29.585792 [ 3.250154] ima: No architecture policies found Jun 30 02:32:29.597749 [ 3.254692] evm: Initialising EVM extended attributes: Jun 30 02:32:29.597811 [ 3.259740] evm: security.selinux Jun 30 02:32:29.597855 [ 3.263031] evm: security.SMACK64 (disabled) Jun 30 02:32:29.609742 [ 3.267278] evm: security.SMACK64EXEC (disabled) Jun 30 02:32:29.609802 [ 3.271879] evm: security.SMACK64TRANSMUTE (disabled) Jun 30 02:32:29.621759 [ 3.276912] evm: security.SMACK64MMAP (disabled) Jun 30 02:32:29.621820 [ 3.281512] evm: security.apparmor Jun 30 02:32:29.621864 [ 3.284897] evm: security.ima Jun 30 02:32:29.633724 [ 3.287849] evm: security.capability Jun 30 02:32:29.633784 [ 3.291414] evm: HMAC attrs: 0x1 Jun 30 02:32:29.633829 [ 3.880741] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 02:32:30.221757 [ 3.886702] clk: Disabling unused clocks Jun 30 02:32:30.233716 [ 3.899665] Freeing unused kernel image (initmem) memory: 2048K Jun 30 02:32:30.245761 [ 3.904529] Checked W+X mappings: passed, no W+X pages found Jun 30 02:32:30.245823 [ 3.909777] Run /init as init process Jun 30 02:32:30.257711 Loading, please wait... Jun 30 02:32:30.281588 Starting systemd-udevd version 252.26-1~deb12u2 Jun 30 02:32:30.365735 [ 4.818593] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 02:32:31.172463 [ 4.853630] usbcore: registered new interface driver usbfs Jun 30 02:32:31.196550 [ 4.862593] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 02:32:31.208574 [ 4.862928] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 02:32:31.217652 [ 4.882702] usbcore: registered new interface driver hub Jun 30 02:32:31.232531 [ 4.903557] Synopsys Designware Multimedia Card Interface Driver Jun 30 02:32:31.253683 [ 4.922629] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 30 02:32:31.265753 [ 4.929312] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 30 02:32:31.277711 [ 4.935054] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 30 02:32:31.277745 [ 4.941367] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 30 02:32:31.289752 [ 4.941813] usbcore: registered new device driver usb Jun 30 02:32:31.289813 [ 4.951776] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo Jun 30 02:32:31.301752 [ 4.963992] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 30 02:32:31.313758 [ 4.967038] mmc_host mmc0: card is polling. Jun 30 02:32:31.313818 [ 4.969031] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 30 02:32:31.313866 [ 4.979332] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo Jun 30 02:32:31.325731 [ 4.994502] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 02:32:31.337683 [ 5.018075] SCSI subsystem initialized Jun 30 02:32:31.361671 [ 5.026769] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 02:32:31.373632 [ 5.060690] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 02:32:31.409728 [ 5.101318] phy phy-12130000.phy.2: phy_power_on was called before phy_init Jun 30 02:32:31.445679 [ 5.115949] phy phy-12130000.phy.2: phy_power_on was called before phy_init Jun 30 02:32:31.457743 [ 5.144936] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 02:32:31.493739 [ 5.151571] exynos-ohci 12120000.usb: USB Host Controller Jun 30 02:32:31.493801 [ 5.159878] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Jun 30 02:32:31.505781 [ 5.167888] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 30 02:32:31.517758 [ 5.168783] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Jun 30 02:32:31.517825 [ 5.192426] mmc0: new DDR MMC card at address 0001 Jun 30 02:32:31.529660 [ 5.195858] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 02:32:31.541665 [ 5.207422] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 30 02:32:31.553771 [ 5.215605] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 30 02:32:31.565697 [ 5.219511] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Jun 30 02:32:31.565729 [ 5.227569] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 30 02:32:31.577764 [ 5.234403] mmc1: new high speed SDHC card at address aaaa Jun 30 02:32:31.577825 [ 5.239447] exynos-ehci 12110000.usb: irq 109, io mem 0x12110000 Jun 30 02:32:31.589691 [ 5.247831] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 30 02:32:31.589727 [ 5.253478] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Jun 30 02:32:31.601745 [ 5.262306] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 30 02:32:31.613715 [ 5.276246] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 02:32:31.625758 [ 5.277931] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Jun 30 02:32:31.625858 [ 5.281269] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 02:32:31.637758 [ 5.293518] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 02:32:31.637825 [ 5.300703] usb usb1: Product: EHCI Host Controller Jun 30 02:32:31.649711 [ 5.305545] usb usb1: Manufacturer: Linux 6.1.0-22-armmp-lpae ehci_hcd Jun 30 02:32:31.649769 [ 5.312050] usb usb1: SerialNumber: 12110000.usb Jun 30 02:32:31.661657 [ 5.316732] mmcblk0: p1 p2 p3 p4 Jun 30 02:32:31.661713 [ 5.343595] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Jun 30 02:32:31.685723 [ 5.346901] exynos-ohci 12120000.usb: irq 109, io mem 0x12120000 Jun 30 02:32:31.697630 [ 5.352153] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Jun 30 02:32:31.697664 [ 5.362473] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (241:0) Jun 30 02:32:31.709671 [ 5.415903] hub 1-0:1.0: USB hub found Jun 30 02:32:31.757650 [ 5.418507] hub 1-0:1.0: 3 ports detected Jun 30 02:32:31.769695 [ 5.419560] scsi host0: ahci-dwc Jun 30 02:32:31.769727 [ 5.424744] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Jun 30 02:32:31.781691 [ 5.433688] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 02:32:31.781729 [ 5.440922] usb usb2: Product: USB Host Controller Jun 30 02:32:31.793680 [ 5.445639] usb usb2: Manufacturer: Linux 6.1.0-22-armmp-lpae ohci_hcd Jun 30 02:32:31.793715 [ 5.452167] usb usb2: SerialNumber: 12120000.usb Jun 30 02:32:31.793741 [ 5.468178] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 110 Jun 30 02:32:31.817684 [ 5.494511] hub 2-0:1.0: USB hub found Jun 30 02:32:31.841660 [ 5.501000] hub 2-0:1.0: 3 ports detected Jun 30 02:32:31.841692 [ 5.761195] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 02:32:32.117636 [ 5.832956] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 02:32:32.189620 [ 5.949742] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 30 02:32:32.297701 [ 5.955301] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 30 02:32:32.309689 [ 5.961157] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 30 02:32:32.309725 [ 5.967729] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 02:32:32.321700 [ 5.977859] ata1.00: configured for UDMA/133 Jun 30 02:32:32.321732 [ 5.981928] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 30 02:32:32.333654 [ 6.043654] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 02:32:32.393695 [ 6.047928] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 02:32:32.393733 [ 6.055918] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Jun 30 02:32:32.405647 [ 6.064763] xhci-hcd xhci-hcd.2.auto: irq 111, io mem 0x12000000 Jun 30 02:32:32.417650 [ 6.070937] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 02:32:32.417684 [ 6.076172] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 02:32:32.429706 [ 6.083870] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 02:32:32.441689 [ 6.093234] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 02:32:32.441724 [ 6.099912] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 02:32:32.453700 [ 6.107955] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 02:32:32.453736 [ 6.115151] usb usb3: Product: xHCI Host Controller Jun 30 02:32:32.465708 [ 6.120005] usb usb3: Manufacturer: Linux 6.1.0-22-armmp-lpae xhci-hcd Jun 30 02:32:32.465743 [ 6.126502] usb usb3: SerialNumber: xhci-hcd.2.auto Jun 30 02:32:32.477623 [ 6.136445] hub 3-0:1.0: USB hub found Jun 30 02:32:32.477655 [ 6.138824] hub 3-0:1.0: 1 port detected Jun 30 02:32:32.489715 [ 6.143272] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 02:32:32.489754 [ 6.150914] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Jun 30 02:32:32.501691 [ 6.159009] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 02:32:32.513684 [ 6.166179] usb usb4: Product: xHCI Host Controller Jun 30 02:32:32.513717 [ 6.171037] usb usb4: Manufacturer: Linux 6.1.0-22-armmp-lpae xhci-hcd Jun 30 02:32:32.525651 [ 6.177553] usb usb4: SerialNumber: xhci-hcd.2.auto Jun 30 02:32:32.525685 [ 6.190719] hub 4-0:1.0: USB hub found Jun 30 02:32:32.537687 [ 6.193056] hub 4-0:1.0: 1 port detected Jun 30 02:32:32.537718 [ 6.193304] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 02:32:32.549697 [ 6.208778] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 30 02:32:32.561685 [ 6.214915] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 30 02:32:32.561718 [ 6.220136] sd 0:0:0:0: [sda] Write Protect is off Jun 30 02:32:32.561744 [ 6.225290] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 30 02:32:32.573704 [ 6.233950] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 30 02:32:32.585639 [ 6.267340] sda: sda1 sda2 < sda5 > Jun 30 02:32:32.609672 [ 6.270800] sd 0:0:0:0: [sda] Attached SCSI disk Jun 30 02:32:32.621621 [ 6.306420] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 02:32:32.657643 [ 6.631920] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 02:32:32.981672 [ 6.706169] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 02:32:33.053671 [ 6.830557] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 02:32:33.185628 [ 6.938173] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 02:32:33.293609 [ 7.045794] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 02:32:33.401645 [ 7.053306] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 02:32:33.401683 [ 7.341722] random: crng init done Jun 30 02:32:33.677816 [ 7.450728] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. Jun 30 02:32:33.797666 [ 7.461550] device-mapper: uevent: version 1.0.3 Jun 30 02:32:33.809651 [ 7.467534] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Jun 30 02:32:33.809689 Begin: Loading essential drivers ... done. Jun 30 02:32:34.457659 Begin: Running /scripts/init-premount ... done. Jun 30 02:32:37.469812 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 30 02:32:37.469903 Begin: Running /scripts/local-premount ... done. Jun 30 02:32:37.565681 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 30 02:32:37.616608 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 30 02:32:37.712591 /dev/mapper/arndale--metrocentre--vg-root: clean, 39331/1220608 files, 377983/4882432 blocks Jun 30 02:32:37.976509 done. Jun 30 02:32:37.988531 [ 11.763495] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 30 02:32:38.108551 [ 12.030963] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. Jun 30 02:32:38.376546 done. Jun 30 02:32:38.376546 Begin: Running /scripts/local-bottom ... done. Jun 30 02:32:38.424531 Begin: Running /scripts/init-bottom ... done. Jun 30 02:32:38.464479 [ 12.360138] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. Jun 30 02:32:38.704554 INIT: version 3.06 booting Jun 30 02:32:38.980451 INIT: No inittab.d directory found Jun 30 02:32:39.097600 Using makefile-style concurrent boot in runlevel S. Jun 30 02:32:39.445720 Starting hotplug events dispatcher: systemd-udevd. Jun 30 02:32:41.065702 Synthesizing the initial hotplug events (subsystems)...done. Jun 30 02:32:41.305650 Synthesizing the initial hotplug events (devices)...done. Jun 30 02:32:41.881781 Waiting for /dev to be fully populated...[ 15.772460] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 02:32:42.121703 [ 15.811706] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 30 02:32:42.157725 [ 15.897586] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jun 30 02:32:42.241722 [ 15.923198] panfrost 11800000.gpu: clock rate = 533000000 Jun 30 02:32:42.265726 [ 16.052861] panfrost 11800000.gpu: mali-t600 id 0x600 major 0x0 minor 0x0 status 0x1 Jun 30 02:32:42.397764 [ 16.059179] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,31b4dfff Jun 30 02:32:42.409768 [ 16.067380] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 Jun 30 02:32:42.421745 [ 16.079100] panfrost 11800000.gpu: shader_present=0xf l2_present=0x1 Jun 30 02:32:42.421808 [ 16.096346] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 0 Jun 30 02:32:42.445713 [ 16.165748] usb3503 usb-hub: switched to HUB mode Jun 30 02:32:42.505694 [ 16.168988] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 02:32:42.517704 [ 16.209738] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 02:32:42.553762 [ 16.279742] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 02:32:42.625645 [ 16.412212] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 02:32:42.757689 [ 16.491433] usb 1-3: new high-speed USB device number 2 using exynos-ehci Jun 30 02:32:42.841689 [ 16.520698] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 02:32:42.865751 [ 16.628949] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 02:32:42.973767 [ 16.670171] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Jun 30 02:32:43.021756 [ 16.676946] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jun 30 02:32:43.021822 [ 16.684600] hub 1-3:1.0: USB hub found Jun 30 02:32:43.021868 [ 16.687918] hub 1-3:1.0: 3 ports detected Jun 30 02:32:43.033729 [ 16.737056] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 02:32:43.081761 [ 16.889869] I/O error, dev mmcblk1, sector 7743712 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 2 Jun 30 02:32:43.240505 [ 16.899384] OF: graph: no port node found in /soc/hdmi@14530000 Jun 30 02:32:43.240505 [ 16.977763] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Jun 30 02:32:43.324519 [ 16.997992] I/O error, dev mmcblk1, sector 7743713 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 2 Jun 30 02:32:43.348519 [ 17.103554] usb 1-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=77.32 Jun 30 02:32:43.460573 [ 17.110595] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Jun 30 02:32:43.460573 [ 17.117806] usb 1-3.2: Product: USB2.0 Hub Jun 30 02:32:43.460573 [ 17.123082] hub 1-3.2:1.0: USB hub found Jun 30 02:32:43.472506 [ 17.126394] hub 1-3.2:1.0: 4 ports detected Jun 30 02:32:43.472506 [ 17.293826] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 02:32:43.640562 [ 17.367967] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 02:32:43.724474 [ 17.421863] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 30 02:32:43.772531 [ 17.482812] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 02:32:43.832467 [ 17.536299] usb 1-3.2.4: New USB device found, idVendor=0b95, idProduct=772a, bcdDevice= 0.01 Jun 30 02:32:43.880570 [ 17.544096] usb 1-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 30 02:32:43.892601 [ 17.551155] usb 1-3.2.4: Product: AX88772 Jun 30 02:32:43.892601 [ 17.555109] usb 1-3.2.4: Manufacturer: ASIX Elec. Corp. Jun 30 02:32:43.904564 [ 17.560274] usb 1-3.2.4: SerialNumber: 000001 Jun 30 02:32:43.904564 [ 17.590806] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 02:32:43.940792 [ 17.698822] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 02:32:44.052708 [ 17.806736] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 02:32:44.160797 [ 17.814366] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 02:32:44.160867 [ 18.097486] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 30 02:32:44.445784 [ 18.776348] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 02:32:45.129817 [ 18.791905] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Jun 30 02:32:45.141799 [ 18.803703] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 92:df:84:3a:82:c8 Jun 30 02:32:45.153827 [ 18.814453] usbcore: registered new interface driver asix Jun 30 02:32:45.153887 done. Jun 30 02:32:45.465685 [ 19.634184] EXT4-fs (dm-0): re-mounted. Quota mode: none. Jun 30 02:32:45.981767 Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). Jun 30 02:32:46.017737 Checking file systems.../dev/sda1: clean, 922/61056 files, 25374/243968 blocks Jun 30 02:32:47.157684 done. Jun 30 02:32:47.205587 Cleaning up temporary files... /tmp. Jun 30 02:32:47.493802 [ 21.346616] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 30 02:32:47.689791 [ 21.398430] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Jun 30 02:32:47.749756 [ 21.659066] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k FS Jun 30 02:32:48.013750 Mounting local filesystems...done. Jun 30 02:32:48.397760 Activating swapfile swap, if any...done. Jun 30 02:32:48.397824 Cleaning up temporary files.... Jun 30 02:32:48.445676 Starting Setting kernel variables: sysctl. Jun 30 02:32:48.709768 [ 22.914122] audit: type=1400 audit(1719714770.420:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=903 comm="apparmor_parser" Jun 30 02:32:49.273816 [ 22.931213] audit: type=1400 audit(1719714770.420:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=903 comm="apparmor_parser" Jun 30 02:32:49.285798 [ 22.961290] audit: type=1400 audit(1719714770.460:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=902 comm="apparmor_parser" Jun 30 02:32:49.321743 [ 23.006776] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Jun 30 02:32:49.357740 [ 23.292763] audit: type=1400 audit(1719714770.796:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=941 comm="apparmor_parser" Jun 30 02:32:49.645848 [ 23.307060] audit: type=1400 audit(1719714770.796:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=941 comm="apparmor_parser" Jun 30 02:32:49.669799 [ 23.321237] audit: type=1400 audit(1719714770.796:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=941 comm="apparmor_parser" Jun 30 02:32:49.681751 [ 23.674959] audit: type=1400 audit(1719714771.180:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=939 comm="apparmor_parser" Jun 30 02:32:50.029859 [ 23.693793] audit: type=1400 audit(1719714771.180:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=939 comm="apparmor_parser" Jun 30 02:32:50.053829 [ 23.709673] audit: type=1400 audit(1719714771.180:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=939 comm="apparmor_parser" Jun 30 02:32:50.065735 [ 23.727221] audit: type=1400 audit(1719714771.180:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=939 comm="apparmor_parser" Jun 30 02:32:50.089726 Starting: AppArmorLoading AppArmor profiles...done. Jun 30 02:32:50.089785 . Jun 30 02:32:50.089824 [ 25.158900] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 30 02:32:51.509774 [ 25.164980] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jun 30 02:32:51.509851 Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1 Jun 30 02:32:53.285726 Copyright 2004-2022 Internet Systems Consortium. Jun 30 02:32:53.285782 All rights reserved. Jun 30 02:32:53.285805 For info, please visit https://www.isc.org/software/dhcp/ Jun 30 02:32:53.297657 Jun 30 02:32:53.297684 Listening on LPF/eth0/9e:04:00:59:64:5a Jun 30 02:32:53.297709 Sending on LPF/eth0/9e:04:00:59:64:5a Jun 30 02:32:53.297733 Sending on Socket/fallback Jun 30 02:32:53.297756 Created duid "\000\001\000\001.\023\200R\236\004\000YdZ". Jun 30 02:32:53.309654 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 Jun 30 02:32:53.309687 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 Jun 30 02:32:54.545806 DHCPOFFER of 10.149.64.44 from 10.149.64.4 Jun 30 02:32:54.545887 DHCPREQUEST for 10.149.64.44 on eth0 to 255.255.255.255 port 67 Jun 30 02:32:54.557753 DHCPACK of 10.149.64.44 from 10.149.64.4 Jun 30 02:32:54.557811 bound to 10.149.64.44 -- renewal in 300 seconds. Jun 30 02:32:54.569684 done. Jun 30 02:32:54.569736 Cleaning up temporary files.... Jun 30 02:32:54.605704 Starting nftables: none Jun 30 02:32:54.749767 . Jun 30 02:32:55.133660 INIT: Entering runlevel: 2 Jun 30 02:32:55.169615 Using makefile-style concurrent boot in runlevel 2. Jun 30 02:32:55.229591 [ 28.894607] exynos4-fb 14400000.fimd: deferred probe timeout, ignoring dependency Jun 30 02:32:55.241623 [ 28.905515] exynos-mixer 14450000.mixer: deferred probe timeout, ignoring dependency Jun 30 02:32:55.253627 [ 28.912523] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations Jun 30 02:32:55.265629 [ 28.919470] exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm]) Jun 30 02:32:55.265666 [ 28.927469] exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm]) Jun 30 02:32:55.277638 Starting Apache httpd web serv[ 28.941173] exynos-drm exynos-drm: bound 14500000.dsi (ops hdmi_enable [exynosdrm]) Jun 30 02:32:55.289708 [ 28.948547] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm]) Jun 30 02:32:55.301622 er: apache2[ 28.960006] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Jun 30 02:32:55.301659 [ 28.965321] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Jun 30 02:32:55.313710 [ 28.972284] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 Jun 30 02:32:55.325570 . Jun 30 02:32:57.317762 Starting periodic command scheduler: cron. Jun 30 02:32:57.701770 Starting NTP server: ntpd2024-06-30T02:32:58 ntpd[1134]: INIT: ntpd ntpsec-1.2.2: Starting Jun 30 02:32:57.917791 2024-06-30T02:32:58 ntpd[1134]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 30 02:32:57.929649 . Jun 30 02:32:57.929676 Starting system message bus: dbus. Jun 30 02:32:58.061747 Starting OpenBSD Secure Shell server: sshd. Jun 30 02:32:58.709680 Jun 30 02:32:59.741772 Debian GNU/Linux 12 arndale-metrocentre ttySAC2 Jun 30 02:32:59.741864 Jun 30 02:32:59.741903 arndale-metrocentre login: INIT: Switching to r INIT: No initUsing makefile-style concurrent boot in runlevel 6. Jun 30 02:38:06.917976 Stopping SMP IRQ Balancer: irqbalance. Jun 30 02:38:06.989755 Stopping nftables: none. Jun 30 02:38:06.989870 Stopping hotplug events dispatcher: systemd-udevd. Jun 30 02:38:07.013990 Saving the system clock to /dev/rtc0. Jun 30 02:38:07.937836 Hardware Clock updated to Sun Jun 30 02:38:09 UTC 2024. Jun 30 02:38:07.949795 Stopping Apache httpd web server: apache2. Jun 30 02:38:08.144788 Asking all remaining processes to terminate...done. Jun 30 02:38:08.592821 All processes ended within 1 seconds...done. Jun 30 02:38:08.592913 Deconfiguring network interfaces...ifdown: ignoring unknown interface eth0=eth0 Jun 30 02:38:08.700941 done. Jun 30 02:38:08.701024 [ 342.551155] EXT4-fs (sda1): unmounting filesystem. Jun 30 02:38:08.889813 Deactivating swap...done. Jun 30 02:38:08.949899 Unmounting local filesystems...done. Jun 30 02:38:08.949992 [ 342.906068] EXT4-fs (dm-0): re-mounted. Quota mode: none. Jun 30 02:38:09.256929 Will now restart. Jun 30 02:38:09.577775 [ 343.268270] asix 1-3.2.4:1.0 eth0: Link is Down Jun 30 02:38:09.601859 [ 343.338740] sd 0:0:0:0: [sda] Synchronizing SCSI cache Jun 30 02:38:09.673791 [ 343.346489] wake enabled for irq 101 (gpx1-4) Jun 30 02:38:09.685835 [ 343.349373] wake enabled for irq 102 (gpx1-5) Jun 30 02:38:09.685910 [ 343.353735] wake enabled for irq 103 (gpx1-6) Jun 30 02:38:09.697854 [ 343.358068] wake enabled for irq 104 (gpx1-7) Jun 30 02:38:09.697930 [ 343.362408] wake enabled for irq 105 (gpx2-0) Jun 30 02:38:09.697969 [ 343.366747] wake enabled for irq 106 (gpx2-1) Jun 30 02:38:09.709775 [ 343.371571] reboot: Reű Jun 30 02:38:10.045797 Jun 30 02:38:10.045880 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 02:38:10.045927 Jun 30 02:38:10.045966 CPU: Exynos5250@1000MHz Jun 30 02:38:10.057808 Jun 30 02:38:10.057886 Board: Arndale Jun 30 02:38:10.057927 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 02:38:10.057975 ready Jun 30 02:38:10.058013 DRAM: 2 GiB Jun 30 02:38:10.058053 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 02:38:10.081807 trace: enabled Jun 30 02:38:10.117853 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 02:38:10.480827 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 02:38:10.540812 In: serial Jun 30 02:38:10.624812 Out: serial Jun 30 02:38:10.624907 Err: serial Jun 30 02:38:10.624931 SCSI: ARNDALE SCSI INIT Jun 30 02:38:10.624955 Target spinup took 0 ms. Jun 30 02:38:10.625023 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 02:38:10.625050 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 02:38:10.625077 Net: Net Initialization Skipped Jun 30 02:38:10.625100 No ethernet found. Jun 30 02:38:10.625122 Hostname: arndale-metrocentre Jun 30 02:38:10.625145 Hit any key to stop autoboot: 2  1  0 Jun 30 02:38:12.485674 (Re)start USB... Jun 30 02:38:12.485728 USB0: USB EHCI 1.00 Jun 30 02:38:12.497675 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 02:38:18.093826 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 02:38:18.093902 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 02:38:18.537823 Waiting for Ethernet connection... done. Jun 30 02:38:20.181653 BOOTP broadcast 1 Jun 30 02:38:20.193662 BOOTP broadcast 2 Jun 30 02:38:21.525745 DHCP client bound to address 10.149.64.44 (1395 ms) Jun 30 02:38:21.525787 Using asx0 device Jun 30 02:38:21.525810 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 02:38:21.537787 Filename 'pxelinux.0'. Jun 30 02:38:21.537837 Load address: 0x43e00000 Jun 30 02:38:21.537858 Loading: *### Jun 30 02:38:21.561894 2.4 MiB/s Jun 30 02:38:21.561930 done Jun 30 02:38:21.561980 Bytes transferred = 42430 (a5be hex) Jun 30 02:38:21.562006 missing environment variable: pxeuuid Jun 30 02:38:21.562030 Retrieving file: pxelinux.cfg/0A95402C Jun 30 02:38:21.573747 Using asx0 device Jun 30 02:38:21.573809 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 02:38:21.573872 Filename 'pxelinux.cfg/0A95402C'. Jun 30 02:38:21.573912 Load address: 0x51000000 Jun 30 02:38:21.585818 Loading: *# Jun 30 02:38:21.585884 31.3 KiB/s Jun 30 02:38:21.585925 done Jun 30 02:38:21.585963 Bytes transferred = 65 (41 hex) Jun 30 02:38:21.586006 Config file found Jun 30 02:38:21.586049 Ignoring unknown command: serial Jun 30 02:38:21.597647 1: local Jun 30 02:38:21.597705 scanning bus for devices... Jun 30 02:38:21.597749 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 02:38:21.621802 Type: Hard Disk Jun 30 02:38:21.621863 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 02:38:21.621890 Found 1 device(s). Jun 30 02:38:21.633842 Jun 30 02:38:21.633935 SCSI device 0: Jun 30 02:38:21.633997 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 02:38:21.634050 Type: Hard Disk Jun 30 02:38:21.634092 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 02:38:21.645678 ... is now current device Jun 30 02:38:21.645708 Scanning scsi 0... Jun 30 02:38:21.645730 Found U-Boot script /boot.scr Jun 30 02:38:21.825860 1768 bytes read in 37 ms (45.9 KiB/s) Jun 30 02:38:21.873798 ## Executing script at 50000000 Jun 30 02:38:21.873862 Loading dtbs/6.10.0-rc5+/exynos5250-arndale.dtb Jun 30 02:38:21.873910 46641 bytes read in 1514 ms (29.3 KiB/s) Jun 30 02:38:23.365696 983052 bytes read in 116 ms (8.1 MiB/s) Jun 30 02:38:23.497744 Loaded xen-4.19-unstable to 0x41000000 (f000c) Jun 30 02:38:23.497800 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan Jun 30 02:38:23.509648 10785280 bytes read in 504 ms (20.4 MiB/s) Jun 30 02:38:24.013760 Loaded vmlinuz-6.10.0-rc5+ to 0x42000000 (a49200) Jun 30 02:38:24.025656 command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 02:38:24.037668 12142182 bytes read in 543 ms (21.3 MiB/s) Jun 30 02:38:24.589709 Loaded initrd.img-6.10.0-rc5+ to 0x43300000 (b94666) Jun 30 02:38:24.589764 chosen { Jun 30 02:38:24.589786 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan"; Jun 30 02:38:24.601683 #size-cells = <0x00000001>; Jun 30 02:38:24.601713 #address-cells = <0x00000001>; Jun 30 02:38:24.613773 stdout-path = "serial2:115200n8"; Jun 30 02:38:24.613773 module@1 { Jun 30 02:38:24.613773 reg = <0x43300000 0x00b94666>; Jun 30 02:38:24.613773 compatible = "xen,linux-initrd", "xen,multiboot-module"; Jun 30 02:38:24.625721 }; Jun 30 02:38:24.625721 module@0 { Jun 30 02:38:24.625721 bootargs = "ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Jun 30 02:38:24.637686 reg = <0x42000000 0x00a49200>; Jun 30 02:38:24.637686 compatible = "xen,linux-zimage", "xen,multiboot-module"; Jun 30 02:38:24.649687 }; Jun 30 02:38:24.649720 }; Jun 30 02:38:24.649741 Booting 0x41000000 - 0x43000000 Jun 30 02:38:24.649764 Kernel image @ 0x41000000 [ 0x000000 - 0x12f000 ] Jun 30 02:38:24.649788 ## Flattened Device Tree blob at 43000000 Jun 30 02:38:24.661667 Booting using the fdt blob at 0x43000000 Jun 30 02:38:24.661681 reserving fdt memory region: addr=43000000 size=c000 Jun 30 02:38:24.673666 Loading Device Tree to 4fff1000, end 4fffffff ... OK Jun 30 02:38:24.673719 Jun 30 02:38:24.673719 Starting kernel ...(fake run for tracing) Jun 30 02:38:24.685632 Jun 30 02:38:24.685664 Jun 30 02:38:24.685685 Starting kernel ... Jun 30 02:38:24.685732 Jun 30 02:38:24.685754 __ __ _ _ _ ___ _ _ _ Jun 30 02:38:24.733681 \ \/ /___ _ __ | || | / |/ _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Jun 30 02:38:24.745684 \ // _ \ '_ \ | || |_ | | (_) |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Jun 30 02:38:24.745723 / \ __/ | | | |__ _|| |\__, |__| |_| | | | \__ \ || (_| | |_) | | __/ Jun 30 02:38:24.757674 /_/\_\___|_| |_| |_|(_)_| /_/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Jun 30 02:38:24.757708 Jun 30 02:38:24.757728 (XEN) Xen version 4.19-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Sun Jun 30 01:52:15 UTC 2024 Jun 30 02:38:24.769661 (XEN) Latest ChangeSet: Wed Jun 26 16:07:30 2024 +0100 git:08f9b1dd9c Jun 30 02:38:24.781719 (XEN) build-id: a1f1bc3a5986d3ec30239a56d95725b8f32801f2 Jun 30 02:38:24.781719 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Jun 30 02:38:24.793684 (XEN) 32-bit Execution: Jun 30 02:38:24.793718 (XEN) Processor Features: 00001031:00011011 Jun 30 02:38:24.793743 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Jun 30 02:38:24.805675 (XEN) Extensions: GenericTimer Security Jun 30 02:38:24.805707 (XEN) Debug Features: 02010555 Jun 30 02:38:24.805731 (XEN) Auxiliary Features: 00000000 Jun 30 02:38:24.817684 (XEN) Memory Model Features: 10201105 20000000 Jun 30 02:38:24.817717 (XEN) 01240000 02102211 Jun 30 02:38:24.817741 (XEN) ISA Features: 02101110 13112111 21232041 Jun 30 02:38:24.829658 (XEN) 11112131 10011142 00000000 Jun 30 02:38:24.829704 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Jun 30 02:38:24.841675 (XEN) Set SYSRAM to 0000000041000074 (00200074) Jun 30 02:38:24.841723 (XEN) SMP: Allowing 2 CPUs Jun 30 02:38:24.853681 (XEN) enabled workaround for: ARM erratum 766422 Jun 30 02:38:24.853718 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Jun 30 02:38:24.853745 (XEN) GICv2 initialization: Jun 30 02:38:24.865685 (XEN) gic_dist_addr=0000000010481000 Jun 30 02:38:24.865717 (XEN) gic_cpu_addr=0000000010482000 Jun 30 02:38:24.865742 (XEN) gic_hyp_addr=0000000010484000 Jun 30 02:38:24.877675 (XEN) gic_vcpu_addr=0000000010486000 Jun 30 02:38:24.877707 (XEN) gic_maintenance_irq=25 Jun 30 02:38:24.877732 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Jun 30 02:38:24.889689 (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2) Jun 30 02:38:24.889743 (XEN) Initializing Credit2 scheduler Jun 30 02:38:24.889743 (XEN) load_precision_shift: 18 Jun 30 02:38:24.901674 (XEN) load_window_shift: 30 Jun 30 02:38:24.901709 (XEN) underload_balance_tolerance: 0 Jun 30 02:38:24.901734 (XEN) overload_balance_tolerance: -3 Jun 30 02:38:24.901757 (XEN) runqueues arrangement: socket Jun 30 02:38:24.913682 (XEN) cap enforcement granularity: 10ms Jun 30 02:38:24.913714 (XEN) load tracking window length 1073741824 ns Jun 30 02:38:24.913739 (XEN) Allocated console ring of 16 KiB. Jun 30 02:38:24.925671 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Jun 30 02:38:24.925706 (XEN) CPU0: Guest atomics will try 1 times before pausing the domain Jun 30 02:38:24.937675 (XEN) Bringing up CPU1 Jun 30 02:38:24.937689 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Jun 30 02:38:24.937689 (XEN) Brought up 2 CPUs Jun 30 02:38:24.949692 (XEN) CPU 1 booted. Jun 30 02:38:24.949734 (XEN) I/O virtualisation disabled Jun 30 02:38:24.949740 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Jun 30 02:38:24.949740 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Jun 30 02:38:24.961689 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Jun 30 02:38:24.961726 (XEN) Initializing Credit2 scheduler Jun 30 02:38:24.961751 (XEN) load_precision_shift: 18 Jun 30 02:38:24.973673 (XEN) load_window_shift: 30 Jun 30 02:38:24.973729 (XEN) underload_balance_tolerance: 0 Jun 30 02:38:24.973755 (XEN) overload_balance_tolerance: -3 Jun 30 02:38:24.973779 (XEN) runqueues arrangement: socket Jun 30 02:38:24.985672 (XEN) cap enforcement granularity: 10ms Jun 30 02:38:24.985704 (XEN) load tracking window length 1073741824 ns Jun 30 02:38:24.985730 (XEN) Adding cpu 0 to runqueue 0 Jun 30 02:38:24.997682 (XEN) First cpu on runqueue, activating Jun 30 02:38:24.997736 (XEN) Adding cpu 1 to runqueue 0 Jun 30 02:38:24.997736 (XEN) alternatives: Patching with alt table 002c2f84 -> 002c305c Jun 30 02:38:25.009663 (XEN) CPU0 will execute ICIALLU on guest exit Jun 30 02:38:25.009711 (XEN) CPU1 will execute ICIALLU on guest exit Jun 30 02:38:25.009711 (XEN) *** LOADING DOMAIN 0 *** Jun 30 02:38:25.021697 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Jun 30 02:38:25.021740 (XEN) Loading ramdisk from boot module @ 0000000043300000 Jun 30 02:38:25.021767 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Jun 30 02:38:25.033605 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Jun 30 02:38:25.597716 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Jun 30 02:38:25.609613 (XEN) Allocating PPI 16 for event channel interrupt Jun 30 02:38:25.633658 (XEN) d0: extended regions not supported for 32-bit guests Jun 30 02:38:25.645705 (XEN) Loading zImage from 0000000042000000 to 0000000067400000-0000000067e49200 Jun 30 02:38:25.645741 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d94666 Jun 30 02:38:25.741679 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b499 Jun 30 02:38:25.837671 (XEN) Initial low memory virq threshold set at 0x4000 pages. Jun 30 02:38:25.849694 (XEN) Scrubbing Free RAM in background Jun 30 02:38:25.849726 (XEN) Std. Loglevel: All Jun 30 02:38:25.849764 (XEN) Guest Loglevel: All Jun 30 02:38:25.861669 (XEN) *************************************************** Jun 30 02:38:25.861680 (XEN) WARNING: SILO mode is not enabled. Jun 30 02:38:25.861722 (XEN) It has implications on the security of the system, Jun 30 02:38:25.873662 (XEN) unless the communications have been forbidden between Jun 30 02:38:25.873667 (XEN) untrusted domains. Jun 30 02:38:25.873691 (XEN) *************************************************** Jun 30 02:38:25.885620 (XEN) 3... 2... 1... Jun 30 02:38:28.885654 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 30 02:38:28.885711 (XEN) Freed 352kB init memory. Jun 30 02:38:28.897620 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 02:38:30.025627 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Jun 30 02:38:30.049666 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Jun 30 02:38:30.049702 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Jun 30 02:38:30.061671 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Jun 30 02:38:30.061706 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 02:38:30.073592 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 02:38:30.109647 [ 0.000000] Linux version 6.10.0-rc5+ (osstest@himrod0) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Sun Jun 30 01:19:39 UTC 2024 Jun 30 02:38:30.121697 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 30 02:38:30.133672 [ 0.000000] CPU: div instructions available: patching division code Jun 30 02:38:30.133706 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 02:38:30.145640 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 02:38:30.157672 [ 0.000000] Memory policy: Data cache writealloc Jun 30 02:38:30.157705 [ 0.000000] Xen 4.19 support found Jun 30 02:38:30.157729 [ 0.000000] efi: UEFI not found. Jun 30 02:38:30.169659 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 on node -1 Jun 30 02:38:30.169692 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 02:38:30.169744 [ 0.000000] Zone ranges: Jun 30 02:38:30.181667 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Jun 30 02:38:30.181701 [ 0.000000] Normal empty Jun 30 02:38:30.181725 [ 0.000000] HighMem empty Jun 30 02:38:30.193666 [ 0.000000] Movable zone start for each node Jun 30 02:38:30.193699 [ 0.000000] Early memory node ranges Jun 30 02:38:30.193723 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Jun 30 02:38:30.205675 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Jun 30 02:38:30.205710 [ 0.000000] psci: probing for conduit method from DT. Jun 30 02:38:30.217660 [ 0.000000] psci: PSCIv1.1 detected in firmware. Jun 30 02:38:30.217693 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Jun 30 02:38:30.229665 [ 0.000000] psci: Trusted OS migration not required Jun 30 02:38:30.229699 [ 0.000000] psci: SMC Calling Convention v1.2 Jun 30 02:38:30.229724 [ 0.000000] percpu: Embedded 18 pages/cpu s41428 r8192 d24108 u73728 Jun 30 02:38:30.241674 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 02:38:30.253682 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 02:38:30.265685 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Jun 30 02:38:30.277690 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 131072 Jun 30 02:38:30.277711 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Jun 30 02:38:30.289695 [ 0.000000] Memory: 414600K/524288K available (15360K kernel code, 2268K rwdata, 6084K rodata, 2048K init, 439K bss, 44152K reserved, 65536K cma-reserved, 0K highmem) Jun 30 02:38:30.301676 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 02:38:30.313696 [ 0.000000] trace event string verifier disabled Jun 30 02:38:30.313710 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 02:38:30.313736 [ 0.000000] rcu: RCU event tracing is enabled. Jun 30 02:38:30.325687 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Jun 30 02:38:30.325703 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Jun 30 02:38:30.337688 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 02:38:30.349688 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 02:38:30.349696 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 02:38:30.361684 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 02:38:30.361689 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Jun 30 02:38:30.373692 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 02:38:30.385821 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 02:38:30.385824 [ 0.000013] Switching to timer-based delay loop, resolution 41ns Jun 30 02:38:30.397694 [ 0.000550] Console: colour dummy device 80x30 Jun 30 02:38:30.397706 [ 0.000568] printk: legacy console [hvc0] enabled Jun 30 02:38:30.397732 [ 0.299566] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Jun 30 02:38:30.409686 [ 0.309964] CPU: Testing write buffer coherency: ok Jun 30 02:38:30.421697 [ 0.314907] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 02:38:30.433688 [ 0.324460] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 02:38:30.433704 [ 0.330892] pid_max: default: 32768 minimum: 301 Jun 30 02:38:30.433731 [ 0.335659] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 02:38:30.445773 [ 0.342941] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 02:38:30.457763 [ 0.351359] /cpus/cpu@0 missing clock-frequency property Jun 30 02:38:30.457796 [ 0.356143] /cpus/cpu@1 missing clock-frequency property Jun 30 02:38:30.469700 [ 0.361561] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 02:38:30.469710 [ 0.368262] xen:grant_table: Grant tables using version 1 layout Jun 30 02:38:30.481684 [ 0.373390] Grant table initialized Jun 30 02:38:30.481696 [ 0.376943] xen:events: Using FIFO-based ABI Jun 30 02:38:30.481721 [ 0.381246] Xen: initializing cpu0 Jun 30 02:38:30.493684 [ 0.384771] Setting up static identity map for 0x60300000 - 0x603000ac Jun 30 02:38:30.493699 [ 0.392559] rcu: Hierarchical SRCU implementation. Jun 30 02:38:30.505741 [ 0.396164] rcu: Max phase no-delay instances is 1000. Jun 30 02:38:30.505775 [ 0.404401] EFI services will not be available. Jun 30 02:38:30.505801 [ 0.407720] smp: Bringing up secondary CPUs ... Jun 30 02:38:30.517653 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 02:38:30.589716 [ 0.481965] Xen: initializing cpu1 Jun 30 02:38:30.589748 [ 0.482123] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 02:38:30.589775 [ 0.482146] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 02:38:30.601678 [ 0.501120] smp: Brought up 1 node, 2 CPUs Jun 30 02:38:30.613694 [ 0.504778] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 02:38:30.613697 [ 0.511064] CPU: All CPU(s) started in SVC mode. Jun 30 02:38:30.625682 [ 0.516968] devtmpfs: initialized Jun 30 02:38:30.625682 [ 0.529505] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 02:38:30.637673 [ 0.536057] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Jun 30 02:38:30.649693 [ 0.545727] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 02:38:30.661652 [ 0.553628] pinctrl core: initialized pinctrl subsystem Jun 30 02:38:30.661667 [ 0.560248] DMI not present or invalid. Jun 30 02:38:30.661692 [ 0.563763] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 02:38:30.673676 [ 0.570374] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 02:38:30.685674 [ 0.579702] thermal_sys: Registered thermal governor 'step_wise' Jun 30 02:38:30.685680 [ 0.579857] software IO TLB: area num 2. Jun 30 02:38:30.697682 [ 0.588531] software IO TLB: only able to allocate 8 MB Jun 30 02:38:30.697700 [ 0.595603] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Jun 30 02:38:30.709676 [ 0.600803] No ATAGs? Jun 30 02:38:30.709693 [ 0.603110] hw-breakpoint: Failed to enable monitor mode on CPU 0. Jun 30 02:38:30.709721 [ 0.611801] Serial: AMBA PL011 UART driver Jun 30 02:38:30.721624 [ 0.658444] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 65 Jun 30 02:38:30.769766 [ 0.686922] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 30 02:38:30.793820 [ 0.710863] xen:balloon: Initialising balloon driver Jun 30 02:38:30.817789 [ 0.717311] iommu: Default domain type: Translated Jun 30 02:38:30.829797 [ 0.720726] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 02:38:30.829832 [ 0.729516] SCSI subsystem initialized Jun 30 02:38:30.841873 [ 0.732288] usbcore: registered new interface driver usbfs Jun 30 02:38:30.841934 [ 0.737518] usbcore: registered new interface driver hub Jun 30 02:38:30.841961 [ 0.742856] usbcore: registered new device driver usb Jun 30 02:38:30.853785 [ 0.749575] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 02:38:30.853818 [ 0.753168] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 02:38:30.868695 [ 0.759421] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 02:38:30.868695 [ 0.764488] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 02:38:30.868695 [ 0.769417] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 02:38:30.880664 [ 0.775457] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 02:38:30.880664 [ 0.781237] pps_core: LinuxPPS API ver. 1 registered Jun 30 02:38:30.892584 [ 0.785626] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 02:38:30.904717 [ 0.794853] PTP clock support registered Jun 30 02:38:30.904782 [ 0.799089] EDAC MC: Ver: 3.0.0 Jun 30 02:38:30.904827 [ 0.802346] scmi_core: SCMI protocol bus registered Jun 30 02:38:30.915257 [ 0.809035] vgaarb: loaded Jun 30 02:38:30.915289 [ 0.812244] clocksource: Switched to clocksource arch_sys_counter Jun 30 02:38:30.915316 [ 0.829162] NET: Registered PF_INET protocol family Jun 30 02:38:30.940608 [ 0.832831] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Jun 30 02:38:30.940608 [ 0.840701] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 02:38:30.952573 [ 0.848420] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 02:38:30.964614 [ 0.856205] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Jun 30 02:38:30.964614 [ 0.864038] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Jun 30 02:38:30.976576 [ 0.871314] TCP: Hash tables configured (established 4096 bind 4096) Jun 30 02:38:30.976576 [ 0.877688] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 02:38:30.988640 [ 0.884257] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 02:38:31.000579 [ 0.891351] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 02:38:31.000579 [ 0.897521] RPC: Registered named UNIX socket transport module. Jun 30 02:38:31.012594 [ 0.902990] RPC: Registered udp transport module. Jun 30 02:38:31.012594 [ 0.907746] RPC: Registered tcp transport module. Jun 30 02:38:31.012594 [ 0.912542] RPC: Registered tcp-with-tls transport module. Jun 30 02:38:31.024617 [ 0.918094] RPC: Registered tcp NFSv4.1 backchannel transport module. Jun 30 02:38:31.024617 [ 0.924606] PCI: CLS 0 bytes, default 64 Jun 30 02:38:31.036720 [ 0.930009] Initialise system trusted keyrings Jun 30 02:38:31.036785 [ 0.933329] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Jun 30 02:38:31.048648 [ 0.939844] squashfs: version 4.0 (2009/01/31) Phillip Lougher Jun 30 02:38:31.048648 [ 0.945730] NFS: Registering the id_resolver key type Jun 30 02:38:31.060591 [ 0.950654] Key type id_resolver registered Jun 30 02:38:31.060591 [ 0.954893] Key type id_legacy registered Jun 30 02:38:31.060591 [ 0.958997] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Jun 30 02:38:31.072585 [ 0.965753] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Jun 30 02:38:31.072585 [ 0.973469] Trying to unpack rootfs image as initramfs... Jun 30 02:38:31.084543 [ 0.995052] Key type asymmetric registered Jun 30 02:38:31.096573 [ 0.997790] Asymmetric key parser 'x509' registered Jun 30 02:38:31.107487 [ 1.002854] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) Jun 30 02:38:31.120587 [ 1.010203] io scheduler mq-deadline registered Jun 30 02:38:31.120587 [ 1.014824] io scheduler kyber registered Jun 30 02:38:31.120587 [ 1.018938] io scheduler bfq registered Jun 30 02:38:31.132620 [ 1.150728] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 02:38:31.264595 [ 1.156984] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 02:38:31.264595 [ 1.186003] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 02:38:31.300589 [ 1.192261] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 02:38:31.300589 [ 1.223510] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 02:38:31.333809 [ 1.229716] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 02:38:31.345673 [ 1.264850] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 02:38:31.369752 [ 1.271059] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 02:38:31.381757 [ 1.283420] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 02:38:31.393682 [ 1.323850] xen:xen_evtchn: Event-channel device installed Jun 30 02:38:31.429706 [ 1.549163] Freeing initrd memory: 11860K Jun 30 02:38:31.657864 [ 1.561709] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 02:38:31.669730 [ 1.572800] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 02:38:31.681826 [ 1.581254] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 02:38:31.693750 [ 1.589907] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 02:38:31.693819 [ 1.598955] SuperH (H)SCI(F) driver initialized Jun 30 02:38:31.705755 [ 1.603226] STMicroelectronics ASC driver initialized Jun 30 02:38:31.705816 [ 1.608060] STM32 USART driver initialized Jun 30 02:38:31.717746 [ 1.613553] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 02:38:31.717811 [ 1.622191] random: crng init done Jun 30 02:38:31.729717 [ 1.629870] brd: module loaded Jun 30 02:38:31.729774 [ 1.635813] loop: module loaded Jun 30 02:38:31.741707 [ 1.651406] Invalid max_queues (4), will use default max: 2. Jun 30 02:38:31.753734 [ 1.670034] tun: Universal TUN/TAP device driver, 1.6 Jun 30 02:38:31.777757 [ 1.673907] CAN device driver interface Jun 30 02:38:31.777815 [ 1.679046] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Jun 30 02:38:31.793739 [ 1.690230] xen_netfront: Initialising Xen virtual ethernet driver Jun 30 02:38:31.793802 [ 1.695101] pegasus: Pegasus/Pegasus II USB Ethernet driver Jun 30 02:38:31.805742 [ 1.700702] usbcore: registered new interface driver pegasus Jun 30 02:38:31.805804 [ 1.706441] usbcore: registered new interface driver asix Jun 30 02:38:31.817774 [ 1.711897] usbcore: registered new interface driver ax88179_178a Jun 30 02:38:31.817837 [ 1.718079] usbcore: registered new interface driver cdc_ether Jun 30 02:38:31.829764 [ 1.723980] usbcore: registered new interface driver smsc75xx Jun 30 02:38:31.829851 [ 1.729783] usbcore: registered new interface driver smsc95xx Jun 30 02:38:31.841755 [ 1.735616] usbcore: registered new interface driver net1080 Jun 30 02:38:31.841817 [ 1.741333] usbcore: registered new interface driver cdc_subset Jun 30 02:38:31.853751 [ 1.747340] usbcore: registered new interface driver zaurus Jun 30 02:38:31.853813 [ 1.752976] usbcore: registered new interface driver cdc_ncm Jun 30 02:38:31.865695 [ 1.762493] usbcore: registered new interface driver usb-storage Jun 30 02:38:31.865760 [ 1.773105] i2c_dev: i2c /dev entries driver Jun 30 02:38:31.877725 [ 1.791692] device-mapper: uevent: version 1.0.3 Jun 30 02:38:31.901773 [ 1.795186] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev Jun 30 02:38:31.901845 [ 1.804745] cpu cpu0: OPP table can't be empty Jun 30 02:38:31.913770 [ 1.809474] failed to register cpuidle driver Jun 30 02:38:31.913830 [ 1.812846] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Jun 30 02:38:31.925763 [ 1.821157] sdhci: Secure Digital Host Controller Interface driver Jun 30 02:38:31.925826 [ 1.826204] sdhci: Copyright(c) Pierre Ossman Jun 30 02:38:31.937691 [ 1.834262] sdhci-pltfm: SDHCI platform and OF driver helper Jun 30 02:38:31.937775 [ 1.842033] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 02:38:31.949620 [ 1.847496] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Jun 30 02:38:31.949655 [ 1.854150] usbcore: registered new interface driver usbhid Jun 30 02:38:31.961749 [ 1.858813] usbhid: USB HID core driver Jun 30 02:38:31.961807 [ 1.869710] NET: Registered PF_INET6 protocol family Jun 30 02:38:31.973757 [ 1.874228] Segment Routing with IPv6 Jun 30 02:38:31.973790 [ 1.877063] In-situ OAM (IOAM) with IPv6 Jun 30 02:38:31.985730 [ 1.881082] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Jun 30 02:38:31.985785 [ 1.887616] NET: Registered PF_PACKET protocol family Jun 30 02:38:31.997760 [ 1.892147] can: controller area network core Jun 30 02:38:31.997820 [ 1.896623] NET: Registered PF_CAN protocol family Jun 30 02:38:31.997868 [ 1.901426] can: raw protocol Jun 30 02:38:32.009654 [ 1.904476] can: broadcast manager protocol Jun 30 02:38:32.009687 [ 1.908722] can: netlink gateway - max_hops=1 Jun 30 02:38:32.009712 [ 1.913494] Key type dns_resolver registered Jun 30 02:38:32.021741 [ 1.918162] ThumbEE CPU extension supported. Jun 30 02:38:32.021801 [ 1.921829] Registering SWP/SWPB emulation handler Jun 30 02:38:32.033707 [ 1.936267] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level Jun 30 02:38:32.045753 [ 1.943168] Loading compiled-in X.509 certificates Jun 30 02:38:32.045822 [ 1.986462] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 02:38:32.093651 [ 1.990088] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 02:38:32.093689 [ 1.996968] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 02:38:32.105637 [ 2.004863] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 02:38:32.117676 [ 2.046224] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 02:38:32.153681 [ 2.055075] s5m-rtc s5m-rtc: setting system clock to 2024-06-30T02:38:34 UTC (1719715114) Jun 30 02:38:32.165643 [ 2.066207] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 02:38:32.165676 [ 2.070821] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 02:38:32.177758 [ 2.075252] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 02:38:32.177821 [ 2.081948] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 02:38:32.189759 [ 2.087857] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 02:38:32.189823 [ 2.094109] clk: Not disabling unused clocks Jun 30 02:38:32.201712 [ 2.097525] PM: genpd: Disabling unused power domains Jun 30 02:38:32.201773 [ 2.106095] Freeing unused kernel image (initmem) memory: 2048K Jun 30 02:38:32.213739 [ 2.112436] Run /init as init process Jun 30 02:38:32.213796 Loading, please wait... Jun 30 02:38:32.237628 Starting systemd-udevd version 252.26-1~deb12u2 Jun 30 02:38:32.309722 [ 3.468299] i2c-gpio i2c-10: using lines 552 (SDA) and 553 (SCL) Jun 30 02:38:33.569669 [ 3.505120] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 02:38:33.617781 [ 3.512189] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 02:38:33.617859 [ 3.522626] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 02:38:33.629734 [ 3.578234] phy phy-12130000.phy.9: phy_power_on was called before phy_init Jun 30 02:38:33.689760 [ 3.583847] exynos-ohci 12120000.usb: USB Host Controller Jun 30 02:38:33.689823 [ 3.589335] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Jun 30 02:38:33.701719 [ 3.606637] Synopsys Designware Multimedia Card Interface Driver Jun 30 02:38:33.713739 [ 3.620433] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 30 02:38:33.725773 [ 3.626074] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 Jun 30 02:38:33.737698 [ 3.655308] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 30 02:38:33.761819 [ 3.660399] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 30 02:38:33.761882 [ 3.665989] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo Jun 30 02:38:33.773781 [ 3.677050] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 30 02:38:33.785733 [ 3.695501] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 02:38:33.797727 [ 3.721375] mmc_host mmc0: card is polling. Jun 30 02:38:33.821725 [ 3.754911] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 30 02:38:33.857749 [ 3.771987] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 30 02:38:33.881714 [ 3.777101] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 30 02:38:33.881748 [ 3.782640] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 127,32 bit host data width,128 deep fifo Jun 30 02:38:33.893794 [ 3.792352] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 30 02:38:33.905726 [ 3.799675] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 30 02:38:33.905764 [ 3.800056] hub 1-0:1.0: USB hub found Jun 30 02:38:33.917708 [ 3.820060] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 02:38:33.929778 [ 3.822738] hub 1-0:1.0: 3 ports detected Jun 30 02:38:33.929836 [ 3.831306] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 30 02:38:33.941762 [ 3.839406] ahci-dwc 122f0000.sata: AHCI vers 0001.0300, 32 command slots, 6 Gbps, platform mode Jun 30 02:38:33.953736 [ 3.848273] ahci-dwc 122f0000.sata: 1/1 ports implemented (port mask 0x1) Jun 30 02:38:33.953771 [ 3.855032] phy phy-12130000.phy.9: phy_power_on was called before phy_init Jun 30 02:38:33.965847 [ 3.855117] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 30 02:38:33.977867 [ 3.862116] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 02:38:33.977930 [ 3.877304] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Jun 30 02:38:33.989798 [ 3.918035] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 Jun 30 02:38:34.025800 [ 3.930654] scsi host0: ahci-dwc Jun 30 02:38:34.037730 [ 3.944731] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 128 lpm-pol 0 Jun 30 02:38:34.049839 [ 3.962565] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 02:38:34.073840 [ 3.974688] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 02:38:34.085765 [ 3.989718] hub 2-0:1.0: USB hub found Jun 30 02:38:34.097675 [ 3.993764] hub 2-0:1.0: 3 ports detected Jun 30 02:38:34.097730 [ 4.012096] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Jun 30 02:38:34.121781 [ 4.021085] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 30 02:38:34.133772 [ 4.031232] s3c-rtc 101e0000.rtc: registered as rtc1 Jun 30 02:38:34.133832 [ 4.035745] mmc0: new DDR MMC card at address 0001 Jun 30 02:38:34.145705 [ 4.049885] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Jun 30 02:38:34.157691 [ 4.064562] mmcblk0: p1 p2 p3 p4 Jun 30 02:38:34.169707 [ 4.077352] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Jun 30 02:38:34.181667 [ 4.091895] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Jun 30 02:38:34.193674 [ 4.099465] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 02:38:34.205749 [ 4.114176] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Jun 30 02:38:34.217734 [ 4.127002] mmc1: new high speed SDHC card at address aaaa Jun 30 02:38:34.229750 [ 4.132772] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Jun 30 02:38:34.241687 [ 4.452307] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 30 02:38:34.553764 [ 4.458013] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 30 02:38:34.565799 [ 4.463953] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 30 02:38:34.565864 [ 4.471475] ata1.00: configured for UDMA/133 Jun 30 02:38:34.577753 [ 4.475453] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 30 02:38:34.589749 [ 4.485109] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 30 02:38:34.589818 [ 4.491250] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 30 02:38:34.601764 [ 4.496847] sd 0:0:0:0: [sda] Write Protect is off Jun 30 02:38:34.601825 [ 4.501542] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 30 02:38:34.613753 [ 4.510730] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 30 02:38:34.613816 [ 4.542539] sda: sda1 sda2 < sda5 > Jun 30 02:38:34.649672 [ 4.545549] sd 0:0:0:0: [sda] Attached SCSI disk Jun 30 02:38:34.649726 [ 4.588359] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Jun 30 02:38:34.697767 [ 4.595640] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 02:38:34.697829 [ 4.599777] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 02:38:34.709723 [ 4.697849] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002000010 Jun 30 02:38:34.805764 [ 4.709909] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Jun 30 02:38:34.817771 [ 4.714796] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 02:38:34.817832 [ 4.720150] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 02:38:34.829761 [ 4.727875] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 02:38:34.829824 [ 4.735223] hub 3-0:1.0: USB hub found Jun 30 02:38:34.841759 [ 4.738279] hub 3-0:1.0: 1 port detected Jun 30 02:38:34.841817 [ 4.744804] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 02:38:34.853771 [ 4.756436] hub 4-0:1.0: USB hub found Jun 30 02:38:34.865708 [ 4.758847] hub 4-0:1.0: 1 port detected Jun 30 02:38:34.865767 [ 4.992357] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 02:38:35.105678 [ 5.161367] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 02:38:35.273682 [ 5.299115] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 02:38:35.405655 [ 5.407458] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 02:38:35.513649 [ 5.515782] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 02:38:35.621678 [ 5.624082] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 02:38:35.729844 [ 5.795429] I/O error, dev mmcblk1, sector 7743713 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 Jun 30 02:38:35.909720 [ 6.117999] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 02:38:36.221681 [ 6.261998] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 02:38:36.365608 [ 6.376375] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 02:38:36.485632 [ 6.484124] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 02:38:36.593710 [ 6.591837] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 02:38:36.701787 [ 6.699582] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 02:38:36.809790 [ 6.707199] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 02:38:36.821713 Begin: Loading essential drivers ... done. Jun 30 02:38:36.857699 Begin: Running /scripts/init-premount ... done. Jun 30 02:38:39.881807 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 30 02:38:39.893695 Begin: Running /scripts/local-premount ... done. Jun 30 02:38:39.893755 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 30 02:38:39.953726 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 30 02:38:40.052558 /dev/mapper/arndale--metrocentre--vg-root: clean, 46073/1220608 files, 606042/4882432 blocks Jun 30 02:38:40.316810 done. Jun 30 02:38:40.328803 [ 10.225802] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 30 02:38:40.340752 [ 10.628354] EXT4-fs (dm-0): mounted filesystem 5d5ad151-a33a-4327-8026-0afe14f4be72 ro with ordered data mode. Quota mode: disabled. Jun 30 02:38:40.737659 done. Jun 30 02:38:40.737692 Begin: Running /scripts/local-bottom ... done. Jun 30 02:38:40.773668 Begin: Running /scripts/init-bottom ... done. Jun 30 02:38:40.821589 INIT: version 3.06 booting Jun 30 02:38:41.229707 INIT: No inittab.d directory found Jun 30 02:38:41.289707 Using makefile-style concurrent boot in runlevel S. Jun 30 02:38:41.625713 Starting hotplug events dispatcher: systemd-udevd. Jun 30 02:38:43.245811 Synthesizing the initial hotplug events (subsystems)...done. Jun 30 02:38:43.689722 Synthesizing the initial hotplug events (devices)...done. Jun 30 02:38:44.508767 Waiting for /dev to be fully populated...[ 14.647754] s5p-secss 10830000.sss: s5p-sss driver registered Jun 30 02:38:44.752528 [ 14.663805] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 30 02:38:44.776512 [ 14.687033] mc: Linux media interface: v0.10 Jun 30 02:38:44.788512 [ 14.997104] videodev: Linux video capture interface: v2.00 Jun 30 02:38:45.104547 [ 15.244643] exynos-gsc 13e00000.gsc: Adding to iommu group 0 Jun 30 02:38:45.350152 [ 15.247425] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 02:38:45.360628 [ 15.252466] exynos-gsc 13e10000.gsc: Adding to iommu group 1 Jun 30 02:38:45.372514 [ 15.266482] s5p-mfc 11000000.codec: Adding to iommu group 2 Jun 30 02:38:45.372514 [ 15.296265] exynos-gsc 13e20000.gsc: Adding to iommu group 3 Jun 30 02:38:45.408783 [ 15.301746] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Jun 30 02:38:45.408819 [ 15.306964] exynos-gsc 13e30000.gsc: Adding to iommu group 4 Jun 30 02:38:45.420624 [ 15.346184] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 02:38:45.454797 [ 15.356324] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Jun 30 02:38:45.468542 [ 15.386189] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 02:38:45.492789 [ 15.393582] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 02:38:45.504658 [ 15.411071] s5p-mfc 11000000.codec: decoder registered as /dev/video4 Jun 30 02:38:45.516866 [ 15.422443] usb3503 usb-hub: switched to HUB mode Jun 30 02:38:45.526285 [ 15.425797] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 02:38:45.540529 [ 15.434516] s5p-mfc 11000000.codec: encoder registered as /dev/video5 Jun 30 02:38:45.540529 [ 15.473192] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 02:38:45.585698 [ 15.509471] wm8994 3-001a: Device is not a WM8994, ID is 0 Jun 30 02:38:45.609719 [ 15.515864] wm8994 3-001a: probe with driver wm8994 failed with error -22 Jun 30 02:38:45.621815 [ 15.523352] ------------[ cut here ]------------ Jun 30 02:38:45.621875 [ 15.526613] WARNING: CPU: 1 PID: 48 at drivers/clk/clk.c:1200 clk_core_disable+0xe4/0x194 Jun 30 02:38:45.633786 [ 15.534858] i2s_bus already disabled Jun 30 02:38:45.633839 [ 15.538503] Modules linked in: usb3503 snd_soc_i2s snd_soc_idma snd_soc_s3c_dma s5p_mfc exynos_gsc v4l2_mem2mem videobuf2_dma_contig videobuf2_memops videobuf2_v4l2 videodev pwm_samsung snd_soc_arndale snd_soc_core videobuf2_common snd_pcm_dmaengine ac97_bus snd_pcm s3c2410_wdt mc s5p_sss exynos_rng snd_timer snd soundcore dwc3 wm8994 dwc3_exynos wm8994_regulator s5m8767 clk_s2mps11 dw_mmc_exynos dw_mmc_pltfm ahci_dwc dw_mmc phy_exynos_usb2 phy_exynos5250_sata phy_exynos5_usbdrd ehci_exynos ohci_exynos phy_exynos_mipi_video i2c_gpio rtc_s3c phy_exynos_dp_video i2c_algo_bit Jun 30 02:38:45.693665 [ 15.589286] CPU: 1 PID: 48 Comm: kworker/1:1 Not tainted 6.10.0-rc5+ #1 Jun 30 02:38:45.693702 [ 15.595964] Hardware name: Samsung Exynos (Flattened Device Tree) Jun 30 02:38:45.705766 [ 15.602128] Workqueue: pm pm_runtime_work Jun 30 02:38:45.705826 [ 15.606207] Call trace: Jun 30 02:38:45.705869 [ 15.606218] unwind_backtrace from show_stack+0x10/0x14 Jun 30 02:38:45.717753 [ 15.614107] show_stack from dump_stack_lvl+0x68/0x74 Jun 30 02:38:45.717814 [ 15.619228] dump_stack_lvl from __warn+0x78/0x124 Jun 30 02:38:45.729815 [ 15.624089] __warn from warn_slowpath_fmt+0x124/0x190 Jun 30 02:38:45.729878 [ 15.629296] warn_slowpath_fmt from clk_core_disable+0xe4/0x194 Jun 30 02:38:45.741618 [ 15.635287] clk_core_disable from clk_disable+0x28/0x34 Jun 30 02:38:45.741650 [ 15.640666] clk_disable from i2s_runtime_suspend+0x58/0x68 [snd_soc_i2s] Jun 30 02:38:45.753769 [ 15.647538] i2s_runtime_suspend [snd_soc_i2s] from genpd_runtime_suspend+0xc4/0x274 Jun 30 02:38:45.753838 [ 15.655338] genpd_runtime_suspend from __rpm_callback+0x48/0x18c Jun 30 02:38:45.765720 [ 15.661500] __rpm_callback from rpm_callback+0x54/0x58 Jun 30 02:38:45.765760 [ 15.666793] rpm_callback from rpm_suspend+0xf8/0x65c Jun 30 02:38:45.777690 [ 15.671916] rpm_suspend from pm_runtime_work+0x9c/0xa0 Jun 30 02:38:45.777777 [ 15.677209] pm_runtime_work from process_one_work+0x178/0x3c0 Jun 30 02:38:45.789728 [ 15.683113] process_one_work from worker_thread+0x264/0x474 Jun 30 02:38:45.789767 [ 15.688841] worker_thread from kthread+0xe0/0xfc Jun 30 02:38:45.789843 [ 15.693616] kthread from ret_from_fork+0x14/0x28 Jun 30 02:38:45.801598 [ 15.698388] Exception stack(0xe0e81fb0 to 0xe0e81ff8) Jun 30 02:38:45.801628 [ 15.703511] 1fa0: 00000000 00000000 00000000 00000000 Jun 30 02:38:45.813751 [ 15.711776] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 02:38:45.825763 [ 15.720003] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Jun 30 02:38:45.825825 [ 15.726687] ---[ end trace 0000000000000000 ]--- Jun 30 02:38:45.837791 [ 15.731495] ------------[ cut here ]------------ Jun 30 02:38:45.837869 [ 15.736109] WARNING: CPU: 1 PID: 48 at drivers/clk/clk.c:1059 clk_core_unprepare+0x12c/0x200 Jun 30 02:38:45.849651 [ 15.744910] i2s_bus already unprepared Jun 30 02:38:45.849665 [ 15.748403] Modules linked in: usb3503 snd_soc_i2s snd_soc_idma snd_soc_s3c_dma s5p_mfc exynos_gsc v4l2_mem2mem videobuf2_dma_contig videobuf2_memops videobuf2_v4l2 videodev pwm_samsung snd_soc_arndale snd_soc_core videobuf2_common snd_pcm_dmaengine ac97_bus snd_pcm s3c2410_wdt mc s5p_sss exynos_rng snd_timer snd soundcore dwc3 wm8994 dwc3_exynos wm8994_regulator s5m8767 clk_s2mps11 dw_mmc_exynos dw_mmc_pltfm ahci_dwc dw_mmc phy_exynos_usb2 phy_exynos5250_sata phy_exynos5_usbdrd ehci_exynos ohci_exynos phy_exynos_mipi_video i2c_gpio rtc_s3c phy_exynos_dp_video i2c_algo_bit Jun 30 02:38:45.897843 [ 15.801403] CPU: 1 PID: 48 Comm: kworker/1:1 Tainted: G W 6.10.0-rc5+ #1 Jun 30 02:38:45.909742 [ 15.809500] Hardware name: Samsung Exynos (Flattened Device Tree) Jun 30 02:38:45.921726 [ 15.815664] Workqueue: pm pm_runtime_work Jun 30 02:38:45.921779 [ 15.819744] Call trace: Jun 30 02:38:45.921821 [ 15.819753] unwind_backtrace from show_stack+0x10/0x14 Jun 30 02:38:45.933705 [ 15.827644] show_stack from dump_stack_lvl+0x68/0x74 Jun 30 02:38:45.933779 [ 15.832765] dump_stack_lvl from __warn+0x78/0x124 Jun 30 02:38:45.933833 [ 15.837626] __warn from warn_slowpath_fmt+0x124/0x190 Jun 30 02:38:45.945807 [ 15.842832] warn_slowpath_fmt from clk_core_unprepare+0x12c/0x200 Jun 30 02:38:45.945878 [ 15.849084] clk_core_unprepare from clk_unprepare+0x24/0x2c Jun 30 02:38:45.957684 [ 15.854811] clk_unprepare from i2s_runtime_suspend+0x60/0x68 [snd_soc_i2s] Jun 30 02:38:45.957718 [ 15.861861] i2s_runtime_suspend [snd_soc_i2s] from genpd_runtime_suspend+0xc4/0x274 Jun 30 02:38:45.969733 [ 15.869655] genpd_runtime_suspend from __rpm_callback+0x48/0x18c Jun 30 02:38:45.981778 [ 15.875818] __rpm_callback from rpm_callback+0x54/0x58 Jun 30 02:38:45.981839 [ 15.881129] rpm_callback from rpm_suspend+0xf8/0x65c Jun 30 02:38:45.981887 [ 15.886234] rpm_suspend from pm_runtime_work+0x9c/0xa0 Jun 30 02:38:45.993785 [ 15.891544] pm_runtime_work from process_one_work+0x178/0x3c0 Jun 30 02:38:45.993847 [ 15.897431] process_one_work from worker_thread+0x264/0x474 Jun 30 02:38:46.005870 [ 15.903159] worker_thread from kthread+0xe0/0xfc Jun 30 02:38:46.005964 [ 15.907933] kthread from ret_from_fork+0x14/0x28 Jun 30 02:38:46.017639 [ 15.912707] Exception stack(0xe0e81fb0 to 0xe0e81ff8) Jun 30 02:38:46.017673 [ 15.917830] 1fa0: 00000000 00000000 00000000 00000000 Jun 30 02:38:46.029760 [ 15.926076] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 02:38:46.029827 [ 15.934321] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Jun 30 02:38:46.041762 [ 15.941058] ---[ end trace 0000000000000000 ]--- Jun 30 02:38:46.041821 [ 16.032470] usb 2-3: new high-speed USB device number 2 using exynos-ehci Jun 30 02:38:46.137725 [ 16.058437] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 02:38:46.161832 [ 16.172503] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 02:38:46.281781 [ 16.263484] hub 2-3:1.0: USB hub found Jun 30 02:38:46.361748 [ 16.270393] hub 2-3:1.0: 3 ports detected Jun 30 02:38:46.373718 [ 16.281719] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 02:38:46.389788 [ 16.390174] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 02:38:46.501704 [ 16.482412] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 02:38:46.585679 [ 16.490062] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 02:38:46.597847 [ 16.498812] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 02:38:46.609720 [ 16.510331] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 02:38:46.621857 [ 16.518428] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 02:38:46.633810 [ 16.527111] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 02:38:46.633878 [ 16.571738] I/O error, dev mmcblk1, sector 7743714 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 Jun 30 02:38:46.681701 [ 16.592303] usb 2-3.2: new high-speed USB device number 3 using exynos-ehci Jun 30 02:38:46.693819 [ 16.744868] hub 2-3.2:1.0: USB hub found Jun 30 02:38:46.849752 [ 16.748105] hub 2-3.2:1.0: 4 ports detected Jun 30 02:38:46.849812 [ 16.810486] usbcore: registered new device driver onboard-usb-dev Jun 30 02:38:46.921684 [ 16.882456] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 02:38:46.985722 [ 16.933271] hub 2-3.2:1.0: USB hub found Jun 30 02:38:47.033686 [ 16.936269] hub 2-3.2:1.0: 4 ports detected Jun 30 02:38:47.045668 [ 16.950432] hub 2-3.2:1.0: USB hub found Jun 30 02:38:47.057666 [ 16.953514] hub 2-3.2:1.0: 4 ports detected Jun 30 02:38:47.057723 [ 17.052016] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 02:38:47.168386 [ 17.166451] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 02:38:47.276397 [ 17.272272] usb 2-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 30 02:38:47.384486 [ 17.278119] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 02:38:47.396404 [ 17.387243] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 02:38:47.503904 [ 17.435859] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 30 02:38:47.552415 [ 17.495029] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 02:38:47.600688 [ 17.502672] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 02:38:47.612597 [ 18.124214] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 02:38:48.236615 [ 18.138460] Asix Electronics AX88772A usb-002:004:10: attached PHY driver (mii_bus:phy_addr=usb-002:004:10, irq=POLL) Jun 30 02:38:48.248459 [ 18.148311] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 42:f3:f1:49:0d:d8 Jun 30 02:38:48.260655 done. Jun 30 02:38:48.500319 [ 18.809508] EXT4-fs (dm-0): re-mounted 5d5ad151-a33a-4327-8026-0afe14f4be72 r/w. Quota mode: disabled. Jun 30 02:38:48.924599 Checking file systems.../dev/sda1: clean, 2179/61056 files, 44463/243968 blocks Jun 30 02:38:50.569648 done. Jun 30 02:38:50.605614 Cleaning up temporary files... /tmp Jun 30 02:38:50.773640 . Jun 30 02:38:50.773676 [ 20.866173] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 30 02:38:50.977653 [ 20.918273] EXT4-fs (sda1): mounted filesystem 6f23beba-8ca5-4e07-b382-0219d3a5a6b8 r/w with ordered data mode. Quota mode: disabled. Jun 30 02:38:51.037620 [ 21.018427] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k Jun 30 02:38:51.133763 Mounting local filesystems...done. Jun 30 02:38:51.361842 Activating swapfile swap, if any...done. Jun 30 02:38:51.394241 Cleaning up temporary files.... Jun 30 02:38:51.397742 Starting Setting kernel variables: sysctl. Jun 30 02:38:51.577781 [ 22.872301] xenbr0: port 1(eth0) entered blocking state Jun 30 02:38:52.977736 [ 22.876170] xenbr0: port 1(eth0) entered disabled state Jun 30 02:38:52.989545 [ 22.881481] asix 2-3.2.4:1.0 eth0: entered allmulticast mode Jun 30 02:38:52.989561 [ 22.887363] asix 2-3.2.4:1.0 eth0: entered promiscuous mode Jun 30 02:38:53.001480 [ 22.898251] asix 2-3.2.4:1.0 eth0: configuring for phy/internal link mode Jun 30 02:38:53.001508 Configuring network interfaces...RTNETLINK answers: Operation not supported Jun 30 02:38:54.842001 Jun 30 02:38:54.853765 Waiting for xenbr0 to get ready (MAXWAIT is 2 seconds). Jun 30 02:38:54.853845 [ 25.140508] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 30 02:38:55.249868 [ 25.146554] xenbr0: port 1(eth0) entered blocking state Jun 30 02:38:55.249938 [ 25.151744] xenbr0: port 1(eth0) entered forwarding state Jun 30 02:38:55.261819 done. Jun 30 02:38:55.501702 Cleaning up temporary files.... Jun 30 02:38:55.549904 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Jun 30 02:38:55.597744 Starting nftables: none Jun 30 02:38:55.681766 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Jun 30 02:38:55.765819 failed! Jun 30 02:38:55.765877 startpar: service(s) returned failure: nftables ... failed! Jun 30 02:38:55.777739 INIT: Entering runlevel: 2 Jun 30 02:38:55.789797 Using makefile-style concurrent boot in runlevel 2. Jun 30 02:38:55.813700 Starting Apache httpd web server: apache2AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.149.64.44. Set the 'ServerName' directive globally to suppress this message Jun 30 02:38:56.654013 [ 27.534076] platform sound: deferred probe pending: arndale-audio: snd_soc_register_card() failed Jun 30 02:38:57.641799 . Jun 30 02:38:57.701749 Starting SMP IRQ Balancer: irqbalance. Jun 30 02:38:58.001748 Starting NTP server: ntpd2024-06-30T02:39:00 ntpd[1146]: INIT: ntpd ntpsec-1.2.2: Starting Jun 30 02:38:58.409795 2024-06-30T02:39:00 ntpd[1146]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 30 02:38:58.422059 . Jun 30 02:38:58.422101 Starting system message bus: dbus. Jun 30 02:38:58.509580 Starting OpenBSD Secure Shell server: sshd. Jun 30 02:38:59.181731 Starting /usr/local/sbin/xenstored... Jun 30 02:39:01.925872 Setting domain 0 name, domid and JSON config... Jun 30 02:39:01.925944 Done setting up Dom0 Jun 30 02:39:01.937723 Starting xenconsoled... Jun 30 02:39:01.937755 Starting QEMU as disk backend for dom0 Jun 30 02:39:01.937779 Jun 30 02:39:03.029789 Debian GNU/Linux 12 arndale-metrocentre hvc0 Jun 30 02:39:03.041749 Jun 30 02:39:03.041799 arndale-metrocentre login: [ 70.601419] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 02:39:40.701733 [ 70.743162] EXT4-fs (dm-2): mounted filesystem 6706219d-7628-4a14-baef-445cae5feace r/w with ordered data mode. Quota mode: disabled. Jun 30 02:39:40.857762 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 02:40:47.320382 [ 190.346259] EXT4-fs (dm-2): unmounting filesystem 6706219d-7628-4a14-baef-445cae5feace. Jun 30 02:41:40.453696 [ 206.819669] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 02:41:56.929723 [ 206.961190] EXT4-fs (dm-2): mounted filesystem 6706219d-7628-4a14-baef-445cae5feace r/w with ordered data mode. Quota mode: disabled. Jun 30 02:41:57.073701 [ 209.218107] loop0: detected capacity change from 0 to 19531250 Jun 30 02:41:59.329670 [ 209.724284] xenbr0: port 2(vif1.0) entered blocking state Jun 30 02:41:59.833775 [ 209.728324] xenbr0: port 2(vif1.0) entered disabled state Jun 30 02:41:59.833871 [ 209.733858] vif vif-1-0 vif1.0: entered allmulticast mode Jun 30 02:41:59.845792 [ 209.739487] vif vif-1-0 vif1.0: entered promiscuous mode Jun 30 02:41:59.845872 (XEN) d1v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 02:42:03.889692 (XEN) d1v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 02:42:04.009597 (XEN) d1v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 02:42:04.045661 (XEN) common/grant_table.c:1909:d1v0 Expanding d1 grant table from 1 to 2 frames Jun 30 02:42:06.901684 (XEN) common/grant_table.c:1909:d1v0 Expanding d1 grant table from 2 to 3 frames Jun 30 02:42:06.913651 [ 216.839778] vif vif-1-0 vif1.0: Guest Rx ready Jun 30 02:42:06.949716 [ 216.843179] xenbr0: port 2(vif1.0) entered blocking state Jun 30 02:42:06.949750 [ 216.848356] xenbr0: port 2(vif1.0) entered forwarding state Jun 30 02:42:06.949776 (XEN) gnttab_mark_dirty not implemented yet Jun 30 02:42:06.985686 [ 284.817431] xen-blkback: backend/vbd/1/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 02:43:14.920580 (XEN) common/grant_table.c:1909:d1v1 Expanding d1 grant table from 3 to 4 frames Jun 30 02:43:42.529695 (XEN) common/grant_table.c:1909:d1v0 Expanding d1 grant table from 4 to 5 frames Jun 30 02:44:32.464723 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 02:47:27.933752 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 02:54:09.297632 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 03:00:49.689772 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 03:07:31.208487 [ 2119.519953] xenbr0: port 2(vif1.0) entered disabled state Jun 30 03:13:49.597963 [ 2131.283032] xenbr0: port 2(vif1.0) entered disabled state Jun 30 03:14:01.369923 [ 2131.287539] vif vif-1-0 vif1.0 (unregistering): left allmulticast mode Jun 30 03:14:01.370002 [ 2131.293713] vif vif-1-0 vif1.0 (unregistering): left promiscuous mode Jun 30 03:14:01.381845 [ 2131.300229] xenbr0: port 2(vif1.0) entered disabled state Jun 30 03:14:01.381907 [ 2133.564085] EXT4-fs (dm-2): unmounting filesystem 6706219d-7628-4a14-baef-445cae5feace. Jun 30 03:14:03.649882 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 03:14:11.565689 [ 2146.451039] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 03:14:16.541779 [ 2146.592510] EXT4-fs (dm-2): mounted filesystem 6706219d-7628-4a14-baef-445cae5feace r/w with ordered data mode. Quota mode: disabled. Jun 30 03:14:16.685617 [ 2155.427637] loop0: detected capacity change from 0 to 19531250 Jun 30 03:14:25.513717 [ 2155.789917] xenbr0: port 2(vif2.0) entered blocking state Jun 30 03:14:25.873791 [ 2155.794005] xenbr0: port 2(vif2.0) entered disabled state Jun 30 03:14:25.873859 [ 2155.799468] vif vif-2-0 vif2.0: entered allmulticast mode Jun 30 03:14:25.885743 [ 2155.805100] vif vif-2-0 vif2.0: entered promiscuous mode Jun 30 03:14:25.885805 (XEN) d2v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 03:14:30.072749 (XEN) d2v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 03:14:30.192435 (XEN) d2v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 03:14:30.228266 [ 2163.187332] xen-blkback: backend/vbd/2/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 03:14:33.269777 (XEN) common/grant_table.c:1909:d2v1 Expanding d2 grant table from 1 to 2 frames Jun 30 03:14:33.281755 (XEN) common/grant_table.c:1909:d2v1 Expanding d2 grant table from 2 to 3 frames Jun 30 03:14:33.293578 [ 2163.262583] vif vif-2-0 vif2.0: Guest Rx ready Jun 30 03:14:33.341737 [ 2163.266048] xenbr0: port 2(vif2.0) entered blocking state Jun 30 03:14:33.353630 [ 2163.271399] xenbr0: port 2(vif2.0) entered forwarding state Jun 30 03:14:33.353665 [ 2198.362185] xenbr0: port 2(vif2.0) entered disabled state Jun 30 03:15:08.447251 [ 2198.572989] xenbr0: port 2(vif2.0) entered disabled state Jun 30 03:15:08.653710 [ 2198.583347] vif vif-2-0 vif2.0 (unregistering): left allmulticast mode Jun 30 03:15:08.677659 [ 2198.588540] vif vif-2-0 vif2.0 (unregistering): left promiscuous mode Jun 30 03:15:08.677659 [ 2198.595146] xenbr0: port 2(vif2.0) entered disabled state Jun 30 03:15:08.677659 [ 2225.129181] EXT4-fs (dm-2): unmounting filesystem 6706219d-7628-4a14-baef-445cae5feace. Jun 30 03:15:35.217670 [ 2226.377170] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 03:15:36.468390 [ 2226.529831] EXT4-fs (dm-2): mounted filesystem 6706219d-7628-4a14-baef-445cae5feace r/w with ordered data mode. Quota mode: disabled. Jun 30 03:15:36.624437 [ 2233.964870] loop0: detected capacity change from 0 to 19531250 Jun 30 03:15:44.049726 [ 2234.291215] xenbr0: port 2(vif3.0) entered blocking state Jun 30 03:15:44.369716 [ 2234.295297] xenbr0: port 2(vif3.0) entered disabled state Jun 30 03:15:44.381750 [ 2234.300740] vif vif-3-0 vif3.0: entered allmulticast mode Jun 30 03:15:44.381811 [ 2234.306419] vif vif-3-0 vif3.0: entered promiscuous mode Jun 30 03:15:44.393683 (XEN) d3v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 03:15:48.588614 (XEN) d3v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 03:15:48.708497 (XEN) d3v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 03:15:48.744413 [ 2241.708935] xen-blkback: backend/vbd/3/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 03:15:51.797745 (XEN) common/grant_table.c:1909:d3v0 Expanding d3 grant table from 1 to 2 frames Jun 30 03:15:51.809795 (XEN) common/grant_table.c:1909:d3v0 Expanding d3 grant table from 2 to 3 frames Jun 30 03:15:51.809861 [ 2241.765868] vif vif-3-0 vif3.0: Guest Rx ready Jun 30 03:15:51.845766 [ 2241.770153] xenbr0: port 2(vif3.0) entered blocking state Jun 30 03:15:51.845869 [ 2241.774439] xenbr0: port 2(vif3.0) entered forwarding state Jun 30 03:15:51.857717 [ 2275.032447] xenbr0: port 2(vif3.0) entered disabled state Jun 30 03:16:25.113814 [ 2275.390493] xenbr0: port 2(vif3.0) entered disabled state Jun 30 03:16:25.473758 [ 2275.397153] vif vif-3-0 vif3.0 (unregistering): left allmulticast mode Jun 30 03:16:25.485728 [ 2275.402434] vif vif-3-0 vif3.0 (unregistering): left promiscuous mode Jun 30 03:16:25.485771 [ 2275.408871] xenbr0: port 2(vif3.0) entered disabled state Jun 30 03:16:25.497668 [ 2301.109806] EXT4-fs (dm-2): unmounting filesystem 6706219d-7628-4a14-baef-445cae5feace. Jun 30 03:16:51.192712 [ 2302.392164] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 03:16:52.472724 [ 2302.533710] EXT4-fs (dm-2): mounted filesystem 6706219d-7628-4a14-baef-445cae5feace r/w with ordered data mode. Quota mode: disabled. Jun 30 03:16:52.628655 [ 2310.091660] loop0: detected capacity change from 0 to 19531250 Jun 30 03:17:00.176559 [ 2310.414373] xenbr0: port 2(vif4.0) entered blocking state Jun 30 03:17:00.492552 [ 2310.418412] xenbr0: port 2(vif4.0) entered disabled state Jun 30 03:17:00.504582 [ 2310.423940] vif vif-4-0 vif4.0: entered allmulticast mode Jun 30 03:17:00.504582 [ 2310.429522] vif vif-4-0 vif4.0: entered promiscuous mode Jun 30 03:17:00.516538 (XEN) d4v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 03:17:04.704601 (XEN) d4v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 03:17:04.812629 (XEN) d4v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 03:17:04.845669 (XEN) common/grant_table.c:1909:d4v0 Expanding d4 grant table from 1 to 2 frames Jun 30 03:17:07.832773 (XEN) common/grant_table.c:1909:d4v0 Expanding d4 grant table from 2 to 3 frames Jun 30 03:17:07.844611 [ 2317.823890] vif vif-4-0 vif4.0: Guest Rx ready Jun 30 03:17:07.901720 [ 2317.827162] xenbr0: port 2(vif4.0) entered blocking state Jun 30 03:17:07.913713 [ 2317.832490] xenbr0: port 2(vif4.0) entered forwarding state Jun 30 03:17:07.913777 [ 2317.841991] xen-blkback: backend/vbd/4/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 03:17:07.925709 [ 2352.214554] xenbr0: port 2(vif4.0) entered disabled state Jun 30 03:17:42.289812 [ 2352.492832] xenbr0: port 2(vif4.0) entered disabled state Jun 30 03:17:42.577766 [ 2352.502501] vif vif-4-0 vif4.0 (unregistering): left allmulticast mode Jun 30 03:17:42.589794 [ 2352.507674] vif vif-4-0 vif4.0 (unregistering): left promiscuous mode Jun 30 03:17:42.589861 [ 2352.514216] xenbr0: port 2(vif4.0) entered disabled state Jun 30 03:17:42.589912 [ 2378.233398] EXT4-fs (dm-2): unmounting filesystem 6706219d-7628-4a14-baef-445cae5feace. Jun 30 03:18:08.313657 [ 2379.518378] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 03:18:09.597701 [ 2379.659799] EXT4-fs (dm-2): mounted filesystem 6706219d-7628-4a14-baef-445cae5feace r/w with ordered data mode. Quota mode: disabled. Jun 30 03:18:09.753707 [ 2387.058155] loop0: detected capacity change from 0 to 19531250 Jun 30 03:18:17.145694 [ 2387.394199] xenbr0: port 2(vif5.0) entered blocking state Jun 30 03:18:17.481763 [ 2387.398233] xenbr0: port 2(vif5.0) entered disabled state Jun 30 03:18:17.481827 [ 2387.403769] vif vif-5-0 vif5.0: entered allmulticast mode Jun 30 03:18:17.493704 [ 2387.409378] vif vif-5-0 vif5.0: entered promiscuous mode Jun 30 03:18:17.493767 (XEN) d5v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 03:18:21.685688 (XEN) d5v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 03:18:21.793732 (XEN) d5v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 03:18:21.841665 [ 2394.863444] xen-blkback: backend/vbd/5/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 03:18:24.953740 (XEN) common/grant_table.c:1909:d5v0 Expanding d5 grant table from 1 to 2 frames Jun 30 03:18:24.977741 (XEN) common/grant_table.c:1909:d5v0 Expanding d5 grant table from 2 to 3 frames Jun 30 03:18:24.989733 [ 2394.947231] vif vif-5-0 vif5.0: Guest Rx ready Jun 30 03:18:25.025766 [ 2394.950559] xenbr0: port 2(vif5.0) entered blocking state Jun 30 03:18:25.037738 [ 2394.955815] xenbr0: port 2(vif5.0) entered forwarding state Jun 30 03:18:25.037800 [ 2430.230294] xenbr0: port 2(vif5.0) entered disabled state Jun 30 03:19:00.309799 [ 2430.485121] xenbr0: port 2(vif5.0) entered disabled state Jun 30 03:19:00.561832 [ 2430.490025] vif vif-5-0 vif5.0 (unregistering): left allmulticast mode Jun 30 03:19:00.573767 [ 2430.495811] vif vif-5-0 vif5.0 (unregistering): left promiscuous mode Jun 30 03:19:00.585716 [ 2430.502300] xenbr0: port 2(vif5.0) entered disabled state Jun 30 03:19:00.585780 [ 2456.211529] EXT4-fs (dm-2): unmounting filesystem 6706219d-7628-4a14-baef-445cae5feace. Jun 30 03:19:26.297662 [ 2457.489329] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 03:19:27.573733 [ 2457.630430] EXT4-fs (dm-2): mounted filesystem 6706219d-7628-4a14-baef-445cae5feace r/w with ordered data mode. Quota mode: disabled. Jun 30 03:19:27.717723 [ 2465.028832] loop0: detected capacity change from 0 to 19531250 Jun 30 03:19:35.109810 [ 2465.357008] xenbr0: port 2(vif6.0) entered blocking state Jun 30 03:19:35.433815 [ 2465.361060] xenbr0: port 2(vif6.0) entered disabled state Jun 30 03:19:35.445747 [ 2465.366582] vif vif-6-0 vif6.0: entered allmulticast mode Jun 30 03:19:35.445810 [ 2465.372183] vif vif-6-0 vif6.0: entered promiscuous mode Jun 30 03:19:35.457682 (XEN) d6v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 03:19:39.645745 (XEN) d6v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 03:19:39.753724 (XEN) d6v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 03:19:39.789731 (XEN) common/grant_table.c:1909:d6v0 Expanding d6 grant table from 1 to 2 frames Jun 30 03:19:42.812592 (XEN) common/grant_table.c:1909:d6v0 Expanding d6 grant table from 2 to 3 frames Jun 30 03:19:42.824532 [ 2472.810454] vif vif-6-0 vif6.0: Guest Rx ready Jun 30 03:19:42.888568 [ 2472.813799] xenbr0: port 2(vif6.0) entered blocking state Jun 30 03:19:42.900588 [ 2472.819018] xenbr0: port 2(vif6.0) entered forwarding state Jun 30 03:19:42.900588 [ 2472.830300] xen-blkback: backend/vbd/6/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 03:19:42.912593 [ 2507.100853] xenbr0: port 2(vif6.0) entered disabled state Jun 30 03:20:17.179000 [ 2507.319970] xenbr0: port 2(vif6.0) entered disabled state Jun 30 03:20:17.396476 [ 2507.325527] vif vif-6-0 vif6.0 (unregistering): left allmulticast mode Jun 30 03:20:17.408513 [ 2507.330714] vif vif-6-0 vif6.0 (unregistering): left promiscuous mode Jun 30 03:20:17.420476 [ 2507.337258] xenbr0: port 2(vif6.0) entered disabled state Jun 30 03:20:17.420476 [ 2533.030166] EXT4-fs (dm-2): unmounting filesystem 6706219d-7628-4a14-baef-445cae5feace. Jun 30 03:20:43.117728 [ 2534.270537] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 03:20:44.353913 [ 2534.412086] EXT4-fs (dm-2): mounted filesystem 6706219d-7628-4a14-baef-445cae5feace r/w with ordered data mode. Quota mode: disabled. Jun 30 03:20:44.497879 [ 2541.886264] loop0: detected capacity change from 0 to 19531250 Jun 30 03:20:51.973644 [ 2542.218170] xenbr0: port 2(vif7.0) entered blocking state Jun 30 03:20:52.297733 [ 2542.222239] xenbr0: port 2(vif7.0) entered disabled state Jun 30 03:20:52.309748 [ 2542.227697] vif vif-7-0 vif7.0: entered allmulticast mode Jun 30 03:20:52.309828 [ 2542.233356] vif vif-7-0 vif7.0: entered promiscuous mode Jun 30 03:20:52.309850 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 03:20:52.741573 (XEN) d7v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 03:20:56.509861 (XEN) d7v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 03:20:56.617725 (XEN) d7v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 03:20:56.653722 [ 2549.653953] xen-blkback: backend/vbd/7/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 03:20:59.737808 (XEN) common/grant_table.c:1909:d7v1 Expanding d7 grant table from 1 to 2 frames Jun 30 03:20:59.761701 (XEN) common/grant_table.c:1909:d7v1 Expanding d7 grant table from 2 to 3 frames Jun 30 03:20:59.773718 [ 2549.743414] vif vif-7-0 vif7.0: Guest Rx ready Jun 30 03:20:59.821764 [ 2549.747427] xenbr0: port 2(vif7.0) entered blocking state Jun 30 03:20:59.833695 [ 2549.751991] xenbr0: port 2(vif7.0) entered forwarding state Jun 30 03:20:59.833729 [ 2583.026402] xenbr0: port 2(vif7.0) entered disabled state Jun 30 03:21:33.101710 [ 2583.230672] xenbr0: port 2(vif7.0) entered disabled state Jun 30 03:21:33.305726 [ 2583.242376] vif vif-7-0 vif7.0 (unregistering): left allmulticast mode Jun 30 03:21:33.329856 [ 2583.247571] vif vif-7-0 vif7.0 (unregistering): left promiscuous mode Jun 30 03:21:33.329949 [ 2583.254141] xenbr0: port 2(vif7.0) entered disabled state Jun 30 03:21:33.341608 [ 2611.661614] EXT4-fs (dm-2): unmounting filesystem 6706219d-7628-4a14-baef-445cae5feace. Jun 30 03:22:01.741817 [ 2612.952303] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 03:22:03.029775 [ 2613.093828] EXT4-fs (dm-2): mounted filesystem 6706219d-7628-4a14-baef-445cae5feace r/w with ordered data mode. Quota mode: disabled. Jun 30 03:22:03.185692 [ 2620.626675] loop0: detected capacity change from 0 to 19531250 Jun 30 03:22:10.712587 [ 2620.959917] xenbr0: port 2(vif8.0) entered blocking state Jun 30 03:22:11.044813 [ 2620.964005] xenbr0: port 2(vif8.0) entered disabled state Jun 30 03:22:11.044886 [ 2620.969437] vif vif-8-0 vif8.0: entered allmulticast mode Jun 30 03:22:11.056629 [ 2620.975100] vif vif-8-0 vif8.0: entered promiscuous mode Jun 30 03:22:11.056629 (XEN) d8v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 03:22:15.257714 (XEN) d8v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 03:22:15.365736 (XEN) d8v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 03:22:15.401739 [ 2628.368528] xen-blkback: backend/vbd/8/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 03:22:18.456537 (XEN) common/grant_table.c:1909:d8v0 Expanding d8 grant table from 1 to 2 frames Jun 30 03:22:18.480559 (XEN) common/grant_table.c:1909:d8v0 Expanding d8 grant table from 2 to 3 frames Jun 30 03:22:18.492564 [ 2628.448275] vif vif-8-0 vif8.0: Guest Rx ready Jun 30 03:22:18.528577 [ 2628.452464] xenbr0: port 2(vif8.0) entered blocking state Jun 30 03:22:18.528577 [ 2628.456910] xenbr0: port 2(vif8.0) entered forwarding state Jun 30 03:22:18.540548 [ 2661.618236] xenbr0: port 2(vif8.0) entered disabled state Jun 30 03:22:51.697770 [ 2661.817520] xenbr0: port 2(vif8.0) entered disabled state Jun 30 03:22:51.901749 [ 2661.823876] vif vif-8-0 vif8.0 (unregistering): left allmulticast mode Jun 30 03:22:51.901818 [ 2661.829061] vif vif-8-0 vif8.0 (unregistering): left promiscuous mode Jun 30 03:22:51.913730 [ 2661.835689] xenbr0: port 2(vif8.0) entered disabled state Jun 30 03:22:51.913793 [ 2687.593826] EXT4-fs (dm-2): unmounting filesystem 6706219d-7628-4a14-baef-445cae5feace. Jun 30 03:23:17.681642 [ 2688.867200] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 03:23:18.953618 [ 2689.008782] EXT4-fs (dm-2): mounted filesystem 6706219d-7628-4a14-baef-445cae5feace r/w with ordered data mode. Quota mode: disabled. Jun 30 03:23:19.097745 [ 2696.528958] loop0: detected capacity change from 0 to 19531250 Jun 30 03:23:26.609766 [ 2696.850765] xenbr0: port 2(vif9.0) entered blocking state Jun 30 03:23:26.921733 [ 2696.854856] xenbr0: port 2(vif9.0) entered disabled state Jun 30 03:23:26.933773 [ 2696.860283] vif vif-9-0 vif9.0: entered allmulticast mode Jun 30 03:23:26.933835 [ 2696.865949] vif vif-9-0 vif9.0: entered promiscuous mode Jun 30 03:23:26.945717 (XEN) d9v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 03:23:31.133672 (XEN) d9v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 03:23:31.241779 (XEN) d9v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 03:23:31.290038 (XEN) common/grant_table.c:1909:d9v0 Expanding d9 grant table from 1 to 2 frames Jun 30 03:23:34.289634 (XEN) common/grant_table.c:1909:d9v0 Expanding d9 grant table from 2 to 3 frames Jun 30 03:23:34.301633 [ 2704.284160] vif vif-9-0 vif9.0: Guest Rx ready Jun 30 03:23:34.361584 [ 2704.288659] xenbr0: port 2(vif9.0) entered blocking state Jun 30 03:23:34.373599 [ 2704.292983] xenbr0: port 2(vif9.0) entered forwarding state Jun 30 03:23:34.373599 [ 2704.301356] xen-blkback: backend/vbd/9/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 03:23:34.385557 [ 2737.990218] xenbr0: port 2(vif9.0) entered disabled state Jun 30 03:24:08.069724 [ 2738.194211] xenbr0: port 2(vif9.0) entered disabled state Jun 30 03:24:08.273716 [ 2738.208771] vif vif-9-0 vif9.0 (unregistering): left allmulticast mode Jun 30 03:24:08.285780 [ 2738.213994] vif vif-9-0 vif9.0 (unregistering): left promiscuous mode Jun 30 03:24:08.297737 [ 2738.220466] xenbr0: port 2(vif9.0) entered disabled state Jun 30 03:24:08.297800 [ 2763.878419] EXT4-fs (dm-2): unmounting filesystem 6706219d-7628-4a14-baef-445cae5feace. Jun 30 03:24:33.965690 [ 2765.126668] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 03:24:35.201750 [ 2765.268206] EXT4-fs (dm-2): mounted filesystem 6706219d-7628-4a14-baef-445cae5feace r/w with ordered data mode. Quota mode: disabled. Jun 30 03:24:35.357692 [ 2772.800530] loop0: detected capacity change from 0 to 19531250 Jun 30 03:24:42.881704 [ 2773.124774] xenbr0: port 2(vif10.0) entered blocking state Jun 30 03:24:43.205703 [ 2773.128900] xenbr0: port 2(vif10.0) entered disabled state Jun 30 03:24:43.205772 [ 2773.134520] vif vif-10-0 vif10.0: entered allmulticast mode Jun 30 03:24:43.217729 [ 2773.140266] vif vif-10-0 vif10.0: entered promiscuous mode Jun 30 03:24:43.217792 (XEN) d10v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 03:24:47.417719 (XEN) d10v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 03:24:47.525724 (XEN) d10v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 03:24:47.573693 [ 2780.487668] xen-blkback: backend/vbd/10/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 03:24:50.573703 (XEN) common/grant_table.c:1909:d10v0 Expanding d10 grant table from 1 to 2 frames Jun 30 03:24:50.585796 (XEN) common/grant_table.c:1909:d10v0 Expanding d10 grant table from 2 to 3 frames Jun 30 03:24:50.597755 [ 2780.575381] vif vif-10-0 vif10.0: Guest Rx ready Jun 30 03:24:50.657751 [ 2780.578879] xenbr0: port 2(vif10.0) entered blocking state Jun 30 03:24:50.657815 [ 2780.584543] xenbr0: port 2(vif10.0) entered forwarding state Jun 30 03:24:50.669691 [ 2814.049548] xenbr0: port 2(vif10.0) entered disabled state Jun 30 03:25:24.121734 [ 2814.343013] xenbr0: port 2(vif10.0) entered disabled state Jun 30 03:25:24.421722 [ 2814.351100] vif vif-10-0 vif10.0 (unregistering): left allmulticast mode Jun 30 03:25:24.433694 [ 2814.356503] vif vif-10-0 vif10.0 (unregistering): left promiscuous mode Jun 30 03:25:24.433731 [ 2814.363175] xenbr0: port 2(vif10.0) entered disabled state Jun 30 03:25:24.445643 [ 2840.045744] EXT4-fs (dm-2): unmounting filesystem 6706219d-7628-4a14-baef-445cae5feace. Jun 30 03:25:50.125767 [ 2841.352939] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 03:25:51.433768 [ 2841.494288] EXT4-fs (dm-2): mounted filesystem 6706219d-7628-4a14-baef-445cae5feace r/w with ordered data mode. Quota mode: disabled. Jun 30 03:25:51.577763 [ 2849.013946] loop0: detected capacity change from 0 to 19531250 Jun 30 03:25:59.089638 [ 2849.339917] xenbr0: port 2(vif11.0) entered blocking state Jun 30 03:25:59.413642 [ 2849.344087] xenbr0: port 2(vif11.0) entered disabled state Jun 30 03:25:59.425669 [ 2849.349636] vif vif-11-0 vif11.0: entered allmulticast mode Jun 30 03:25:59.425669 [ 2849.355464] vif vif-11-0 vif11.0: entered promiscuous mode Jun 30 03:25:59.437615 (XEN) d11v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 03:26:03.641706 (XEN) d11v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 03:26:03.749748 (XEN) d11v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 03:26:03.785709 [ 2856.770058] xen-blkback: backend/vbd/11/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 03:26:06.857706 (XEN) common/grant_table.c:1909:d11v1 Expanding d11 grant table from 1 to 2 frames Jun 30 03:26:06.857755 (XEN) common/grant_table.c:1909:d11v1 Expanding d11 grant table from 2 to 3 frames Jun 30 03:26:06.869632 [ 2856.849715] vif vif-11-0 vif11.0: Guest Rx ready Jun 30 03:26:06.929630 [ 2856.853259] xenbr0: port 2(vif11.0) entered blocking state Jun 30 03:26:06.941655 [ 2856.862880] xenbr0: port 2(vif11.0) entered forwarding state Jun 30 03:26:06.941710 [ 2891.208316] xenbr0: port 2(vif11.0) entered disabled state Jun 30 03:26:41.284577 [ 2891.462744] xenbr0: port 2(vif11.0) entered disabled state Jun 30 03:26:41.536581 [ 2891.467407] vif vif-11-0 vif11.0 (unregistering): left allmulticast mode Jun 30 03:26:41.548735 [ 2891.473657] vif vif-11-0 vif11.0 (unregistering): left promiscuous mode Jun 30 03:26:41.548735 [ 2891.480322] xenbr0: port 2(vif11.0) entered disabled state Jun 30 03:26:41.560705 [ 2917.151868] EXT4-fs (dm-2): unmounting filesystem 6706219d-7628-4a14-baef-445cae5feace. Jun 30 03:27:07.232730 [ 2918.445516] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 03:27:08.528562 [ 2918.587055] EXT4-fs (dm-2): mounted filesystem 6706219d-7628-4a14-baef-445cae5feace r/w with ordered data mode. Quota mode: disabled. Jun 30 03:27:08.672574 [ 2926.010241] loop0: detected capacity change from 0 to 19531250 Jun 30 03:27:16.085772 [ 2926.340082] xenbr0: port 2(vif12.0) entered blocking state Jun 30 03:27:16.409716 [ 2926.344253] xenbr0: port 2(vif12.0) entered disabled state Jun 30 03:27:16.421753 [ 2926.349776] vif vif-12-0 vif12.0: entered allmulticast mode Jun 30 03:27:16.421817 [ 2926.355625] vif vif-12-0 vif12.0: entered promiscuous mode Jun 30 03:27:16.433675 (XEN) d12v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 03:27:20.633740 (XEN) d12v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 03:27:20.741718 (XEN) d12v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 03:27:20.789657 [ 2933.744294] xen-blkback: backend/vbd/12/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 03:27:23.825761 (XEN) common/grant_table.c:1909:d12v0 Expanding d12 grant table from 1 to 2 frames Jun 30 03:27:23.861717 (XEN) common/grant_table.c:1909:d12v0 Expanding d12 grant table from 2 to 3 frames Jun 30 03:27:23.861785 [ 2933.828233] vif vif-12-0 vif12.0: Guest Rx ready Jun 30 03:27:23.909714 [ 2933.832486] xenbr0: port 2(vif12.0) entered blocking state Jun 30 03:27:23.909778 [ 2933.840910] xenbr0: port 2(vif12.0) entered forwarding state Jun 30 03:27:23.921706 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 03:27:33.536597 [ 2968.145525] xenbr0: port 2(vif12.0) entered disabled state Jun 30 03:27:58.221797 [ 2968.372978] xenbr0: port 2(vif12.0) entered disabled state Jun 30 03:27:58.449831 [ 2968.378700] vif vif-12-0 vif12.0 (unregistering): left allmulticast mode Jun 30 03:27:58.461802 [ 2968.384125] vif vif-12-0 vif12.0 (unregistering): left promiscuous mode Jun 30 03:27:58.461868 [ 2968.390745] xenbr0: port 2(vif12.0) entered disabled state Jun 30 03:27:58.473802 [ 2994.653713] EXT4-fs (dm-2): unmounting filesystem 6706219d-7628-4a14-baef-445cae5feace. Jun 30 03:28:24.729708 [ 2995.882821] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 03:28:25.957769 [ 2996.024284] EXT4-fs (dm-2): mounted filesystem 6706219d-7628-4a14-baef-445cae5feace r/w with ordered data mode. Quota mode: disabled. Jun 30 03:28:26.101785 [ 3003.537578] loop0: detected capacity change from 0 to 19531250 Jun 30 03:28:33.613730 [ 3003.870749] xenbr0: port 2(vif13.0) entered blocking state Jun 30 03:28:33.949812 [ 3003.874925] xenbr0: port 2(vif13.0) entered disabled state Jun 30 03:28:33.949882 [ 3003.880475] vif vif-13-0 vif13.0: entered allmulticast mode Jun 30 03:28:33.949952 [ 3003.886267] vif vif-13-0 vif13.0: entered promiscuous mode Jun 30 03:28:33.961800 (XEN) d13v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 03:28:38.157672 (XEN) d13v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 03:28:38.277660 (XEN) d13v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 03:28:38.313689 (XEN) common/grant_table.c:1909:d13v1 Expanding d13 grant table from 1 to 2 frames Jun 30 03:28:41.341685 (XEN) common/grant_table.c:1909:d13v0 Expanding d13 grant table from 2 to 3 frames Jun 30 03:28:41.365669 [ 3011.353187] vif vif-13-0 vif13.0: Guest Rx ready Jun 30 03:28:41.425706 [ 3011.356686] xenbr0: port 2(vif13.0) entered blocking state Jun 30 03:28:41.425738 [ 3011.362149] xenbr0: port 2(vif13.0) entered forwarding state Jun 30 03:28:41.437767 [ 3011.373279] xen-blkback: backend/vbd/13/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 03:28:41.449716 [ 3043.663368] xenbr0: port 2(vif13.0) entered disabled state Jun 30 03:29:13.737746 [ 3043.806021] xenbr0: port 2(vif13.0) entered disabled state Jun 30 03:29:13.881726 [ 3043.813941] vif vif-13-0 vif13.0 (unregistering): left allmulticast mode Jun 30 03:29:13.893764 [ 3043.819325] vif vif-13-0 vif13.0 (unregistering): left promiscuous mode Jun 30 03:29:13.893805 [ 3043.826036] xenbr0: port 2(vif13.0) entered disabled state Jun 30 03:29:13.905681 [ 3045.247887] EXT4-fs (dm-2): unmounting filesystem 6706219d-7628-4a14-baef-445cae5feace. Jun 30 03:29:15.325595 Jun 30 03:29:34.075588 (XEN) *** Serial input to Xen (type 'CTRL-x' three times to switch input) Jun 30 03:29:34.093860 Jun 30 03:29:34.095423 Jun 30 03:29:35.075156 (XEN) '0' pressed -> dumping Dom0's registers Jun 30 03:29:35.089768 (XEN) *** Dumping Dom0 vcpu#0 state: *** Jun 30 03:29:35.089828 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Jun 30 03:29:35.092154 Not tainted ]---- Jun 30 03:29:35.101709 (XEN) CPU: 0 Jun 30 03:29:35.101761 (XEN) PC: c031be28 Jun 30 03:29:35.101804 (XEN) CPSR: 60070093 MODE:32-bit Guest SVC Jun 30 03:29:35.101850 (XEN) R0: 00000005 R1: 00000000 R2: 004ecb89 R3: c031be20 Jun 30 03:29:35.113766 (XEN) R4: c1b09d40 R5: c1d26f50 R6: c1b04e5c R7: c1b04e98 Jun 30 03:29:35.113829 (XEN) R8: 00000000 R9: 00000000 R10:000000ad R11:00000000 R12:c1d264a0 Jun 30 03:29:35.125760 (XEN) USR: SP: bebec6c0 LR: b6e91685 Jun 30 03:29:35.125819 (XEN) SVC: SP: c1b01f78 LR: c114e078 SPSR:60070013 Jun 30 03:29:35.125867 (XEN) ABT: SP: c1d38b10 LR: c0301040 SPSR:600b0193 Jun 30 03:29:35.137689 (XEN) UND: SP: c1d38b20 LR: c0300fc0 SPSR:60070093 Jun 30 03:29:35.137689 (XEN) IRQ: SP: c1d38b00 LR: c0300bc0 SPSR:60070193 Jun 30 03:29:35.149772 (XEN) FIQ: SP: c1d38b30 LR: c1d38b30 SPSR:00000000 Jun 30 03:29:35.149837 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Jun 30 03:29:35.149887 (XEN) Jun 30 03:29:35.161753 (XEN) SCTLR: 10c5387d Jun 30 03:29:35.161847 (XEN) TCR: 00000000 Jun 30 03:29:35.161893 (XEN) TTBR0: 0000000065f2c06a Jun 30 03:29:35.161937 (XEN) TTBR1: 000000006020406a Jun 30 03:29:35.161981 (XEN) IFAR: b6e55eb8, IFSR: 00000007 Jun 30 03:29:35.173765 (XEN) DFAR: b6b44f18, DFSR: 00000017 Jun 30 03:29:35.173824 (XEN) Jun 30 03:29:35.173864 (XEN) VTCR_EL2: 80003558 Jun 30 03:29:35.173906 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 03:29:35.185758 (XEN) Jun 30 03:29:35.185811 (XEN) SCTLR_EL2: 30cd187f Jun 30 03:29:35.185854 (XEN) HCR_EL2: 007c663f Jun 30 03:29:35.185897 (XEN) TTBR0_EL2: 0000000041107000 Jun 30 03:29:35.185939 (XEN) Jun 30 03:29:35.185977 (XEN) ESR_EL2: 07e00000 Jun 30 03:29:35.197723 (XEN) HPFAR_EL2: 00104810 Jun 30 03:29:35.197780 (XEN) HDFAR: e0807f00 Jun 30 03:29:35.197823 (XEN) HIFAR: c0c09f04 Jun 30 03:29:35.197865 (XEN) Jun 30 03:29:35.197903 (XEN) Guest stack trace from sp=c1b01f78: Jun 30 03:29:35.209812 (XEN) Failed to convert stack to physical address Jun 30 03:29:35.209875 (XEN) *** Dumping Dom0 vcpu#1 state: *** Jun 30 03:29:35.209920 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Not tainted ]---- Jun 30 03:29:35.221751 (XEN) CPU: 0 Jun 30 03:29:35.221805 (XEN) PC: c031be28 Jun 30 03:29:35.221846 (XEN) CPSR: 60070093 MODE:32-bit Guest SVC Jun 30 03:29:35.221890 (XEN) R0: 00000005 R1: 00000000 R2: 002e84a9 R3: c031be20 Jun 30 03:29:35.233682 (XEN) R4: c2110880 R5: c1d26f50 R6: c1b04e5c R7: c1b04e98 Jun 30 03:29:35.233682 (XEN) R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:c1d264a0 Jun 30 03:29:35.245752 (XEN) USR: SP: bec87960 LR: b6e24685 Jun 30 03:29:35.245814 (XEN) SVC: SP: e08d9fa0 LR: c114e078 SPSR:60070013 Jun 30 03:29:35.245860 (XEN) ABT: SP: c1d38b50 LR: c0300ec0 SPSR:600f0193 Jun 30 03:29:35.257779 (XEN) UND: SP: c1d38b60 LR: c0300fc0 SPSR:60030093 Jun 30 03:29:35.257838 (XEN) IRQ: SP: c1d38b40 LR: c0300bc0 SPSR:60070193 Jun 30 03:29:35.269770 (XEN) FIQ: SP: c1d38b70 LR: c1d38b70 SPSR:00000000 Jun 30 03:29:35.269830 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Jun 30 03:29:35.281798 (XEN) Jun 30 03:29:35.281851 (XEN) SCTLR: 10c5387d Jun 30 03:29:35.281894 (XEN) TCR: 00000000 Jun 30 03:29:35.281934 (XEN) TTBR0: 000000006565806a Jun 30 03:29:35.281976 (XEN) TTBR1: 000000006020406a Jun 30 03:29:35.293755 (XEN) IFAR: b6e7eeb8, IFSR: 00000007 Jun 30 03:29:35.293837 (XEN) DFAR: 005b3318, DFSR: 0000081f Jun 30 03:29:35.293895 (XEN) Jun 30 03:29:35.293934 (XEN) VTCR_EL2: 80003558 Jun 30 03:29:35.293981 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 03:29:35.305759 (XEN) Jun 30 03:29:35.305829 (XEN) SCTLR_EL2: 30cd187f Jun 30 03:29:35.305898 (XEN) HCR_EL2: 007c663f Jun 30 03:29:35.305958 (XEN) TTBR0_EL2: 0000000041107000 Jun 30 03:29:35.306025 (XEN) Jun 30 03:29:35.306089 (XEN) ESR_EL2: 07e00000 Jun 30 03:29:35.317755 (XEN) HPFAR_EL2: 00104810 Jun 30 03:29:35.317832 (XEN) HDFAR: e0807f00 Jun 30 03:29:35.317903 (XEN) HIFAR: c0c09f04 Jun 30 03:29:35.317973 (XEN) Jun 30 03:29:35.318036 (XEN) Guest stack trace from sp=e08d9fa0: Jun 30 03:29:35.329735 (XEN) Failed to convert stack to physical address Jun 30 03:29:35.329794 Jun 30 03:29:37.068224 (XEN) 'H' pressed -> dumping heap info (now = 3072390981958) Jun 30 03:29:37.093956 (XEN) heap[node=0][zone=0] -> 16274 pages Jun 30 03:29:37.094034 (XEN) heap[node=0][zone=1] -> 0 Jun 30 03:29:37.096694 pages Jun 30 03:29:37.105808 (XEN) heap[node=0][zone=2] -> 0 pages Jun 30 03:29:37.105868 (XEN) heap[node=0][zone=3] -> 0 pages Jun 30 03:29:37.105912 (XEN) heap[node=0][zone=4] -> 0 pages Jun 30 03:29:37.105954 (XEN) heap[node=0][zone=5] -> 0 pages Jun 30 03:29:37.117707 (XEN) heap[node=0][zone=6] -> 0 pages Jun 30 03:29:37.117707 (XEN) heap[node=0][zone=7] -> 0 pages Jun 30 03:29:37.117707 (XEN) heap[node=0][zone=8] -> 0 pages Jun 30 03:29:37.129793 (XEN) heap[node=0][zone=9] -> 0 pages Jun 30 03:29:37.129793 (XEN) heap[node=0][zone=10] -> 0 pages Jun 30 03:29:37.129793 (XEN) heap[node=0][zone=11] -> 0 pages Jun 30 03:29:37.129793 (XEN) heap[node=0][zone=12] -> 0 pages Jun 30 03:29:37.141698 (XEN) heap[node=0][zone=13] -> 0 pages Jun 30 03:29:37.141787 (XEN) heap[node=0][zone=14] -> 0 pages Jun 30 03:29:37.141829 (XEN) heap[node=0][zone=15] -> 0 pages Jun 30 03:29:37.153798 (XEN) heap[node=0][zone=16] -> 0 pages Jun 30 03:29:37.153860 (XEN) heap[node=0][zone=17] -> 0 pages Jun 30 03:29:37.153898 (XEN) heap[node=0][zone=18] -> 0 pages Jun 30 03:29:37.153898 (XEN) heap[node=0][zone=19] -> 130833 pages Jun 30 03:29:37.165726 (XEN) heap[node=0][zone=20] -> 241602 pages Jun 30 03:29:37.165773 (XEN) heap[node=0][zone=21] -> 0 pages Jun 30 03:29:37.165831 (XEN) heap[node=0][zone=22] -> 0 pages Jun 30 03:29:37.177794 (XEN) heap[node=0][zone=23] -> 0 pages Jun 30 03:29:37.177902 (XEN) heap[node=0][zone=24] -> 0 pages Jun 30 03:29:37.177944 (XEN) heap[node=0][zone=25] -> 0 pages Jun 30 03:29:37.189668 (XEN) heap[node=0][zone=26] -> 0 pages Jun 30 03:29:37.189767 (XEN) heap[node=0][zone=27] -> 0 pages Jun 30 03:29:37.189785 (XEN) heap[node=0][zone=28] -> 0 pages Jun 30 03:29:37.189785 Jun 30 03:29:39.043182 Jun 30 03:29:40.848833 Jun 30 03:29:41.050869 Jun 30 03:29:42.857091 Jun 30 03:29:43.060360 (XEN) Dumping timer queues: Jun 30 03:29:43.085784 (XEN) CPU00: Jun 30 03:29:43.085818 (XEN) ex= 12437us timer=43fdc968 cb=vtimer.c#virt_timer_expired(43fdc960) Jun 30 03:29:43.085834 (XEN) CPU Jun 30 03:29:43.087870 01: Jun 30 03:29:43.097738 (XEN) ex= 30064us timer=43fef968 cb=vtimer.c#virt_timer_expired(43fef960) Jun 30 03:29:43.097801 Jun 30 03:29:45.070738 Jun 30 03:29:46.868229 Jun 30 03:29:47.070869 (XEN) 'd' pressed -> dumping registers Jun 30 03:29:47.089697 (XEN) Jun 30 03:29:47.089725 (XEN) *** Dumping CPU0 host state: *** Jun 30 03:29:47.089749 (XEN) ----[ Xen-4.19-unstable arm32 debug=y N Jun 30 03:29:47.090978 ot tainted ]---- Jun 30 03:29:47.101687 (XEN) CPU: 0 Jun 30 03:29:47.101721 (XEN) PC: 0025ef7c domain.c#idle_loop+0x130/0x1ac Jun 30 03:29:47.101749 (XEN) CPSR: 600d005a MODE:Hypervisor Jun 30 03:29:47.101774 (XEN) R0: 00000000 R1: 0029f300 R2: 00000000 R3: 00000000 Jun 30 03:29:47.113739 (XEN) R4: 00000000 R5: 002f80e0 R6: 0032b324 R7: 00000001 Jun 30 03:29:47.113772 (XEN) R8: 0032b104 R9: 00000000 R10:40e00000 R11:4003ff54 R12:fffffffc Jun 30 03:29:47.125782 (XEN) HYP: SP: 4003ff44 LR: 00225cb8 Jun 30 03:29:47.125813 (XEN) Jun 30 03:29:47.125835 (XEN) VTCR_EL2: 80003558 Jun 30 03:29:47.125858 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 03:29:47.137769 (XEN) Jun 30 03:29:47.137798 (XEN) SCTLR_EL2: 30cd187f Jun 30 03:29:47.137821 (XEN) HCR_EL2: 007c663f Jun 30 03:29:47.137844 (XEN) TTBR0_EL2: 0000000041107000 Jun 30 03:29:47.137866 (XEN) Jun 30 03:29:47.137887 (XEN) ESR_EL2: 07e00000 Jun 30 03:29:47.149720 (XEN) HPFAR_EL2: 00104810 Jun 30 03:29:47.149750 (XEN) HDFAR: e0807f00 Jun 30 03:29:47.149773 (XEN) HIFAR: c0c09f04 Jun 30 03:29:47.149825 (XEN) Jun 30 03:29:47.149864 (XEN) Xen stack trace from sp=4003ff44: Jun 30 03:29:47.161690 (XEN) 07e00000 00295014 002919ac 4003ff4c 00267818 00000000 00000000 00000000[ 3077.092258] d Jun 30 03:29:47.161756 (XEN) wmmc_exynos 1220 000000000000.mmc: Unexpe 00000000cted interrupt l 00000000atency Jun 30 03:29:47.173697 00000000 00000000 00000000 00000000 00000000 Jun 30 03:29:47.173758 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 03:29:47.185700 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 03:29:47.197701 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 03:29:47.197735 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 03:29:47.209691 (XEN) Xen call trace: Jun 30 03:29:47.209747 (XEN) [<0025ef7c>] domain.c#idle_loop+0x130/0x1ac (PC) Jun 30 03:29:47.209796 (XEN) [<00225cb8>] rcu_needs_cpu+0x40/0x60 (LR) Jun 30 03:29:47.221692 (XEN) [<00267818>] arch_get_xen_caps+0/0x90 Jun 30 03:29:47.221754 (XEN) Jun 30 03:29:47.221793 (XEN) *** Dumping CPU1 host state: *** Jun 30 03:29:47.221837 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Not tainted ]---- Jun 30 03:29:47.233695 (XEN) CPU: 1 Jun 30 03:29:47.233749 (XEN) PC: 0025ef7c domain.c#idle_loop+0x130/0x1ac Jun 30 03:29:47.233796 (XEN) CPSR: 6007005a MODE:Hypervisor Jun 30 03:29:47.245767 (XEN) R0: 00000000 R1: 0029f300 R2: 3fd0e000 R3: 00000000 Jun 30 03:29:47.245829 (XEN) R4: 00000001 R5: 002f80e0 R6: 0032b324 R7: 00000002 Jun 30 03:29:47.257661 (XEN) R8: 0032b104 R9: 00000001 R10:40e00000 R11:4000ff54 R12:fffffffc Jun 30 03:29:47.257695 (XEN) HYP: SP: 4000ff44 LR: 00225cb8 Jun 30 03:29:47.257719 (XEN) Jun 30 03:29:47.257740 (XEN) VTCR_EL2: 80003558 Jun 30 03:29:47.269697 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 03:29:47.269751 (XEN) Jun 30 03:29:47.269790 (XEN) SCTLR_EL2: 30cd187f Jun 30 03:29:47.269831 (XEN) HCR_EL2: 007c663f Jun 30 03:29:47.269872 (XEN) TTBR0_EL2: 00000000ba004000 Jun 30 03:29:47.281693 (XEN) Jun 30 03:29:47.281741 (XEN) ESR_EL2: 07e00000 Jun 30 03:29:47.281784 (XEN) HPFAR_EL2: 00104810 Jun 30 03:29:47.281826 (XEN) HDFAR: e0807f00 Jun 30 03:29:47.281867 (XEN) HIFAR: c141f6d0 Jun 30 03:29:47.293688 (XEN) Jun 30 03:29:47.293736 (XEN) Xen stack trace from sp=4000ff44: Jun 30 03:29:47.293782 (XEN) 07e00000 002f9290 00000001 4000ff3c 002680f4 00000000 00000000 00000000 Jun 30 03:29:47.293831 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 03:29:47.305697 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 03:29:47.317691 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 03:29:47.317749 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 03:29:47.329645 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 03:29:47.329675 (XEN) Xen call trace: Jun 30 03:29:47.341665 (XEN) [<0025ef7c>] domain.c#idle_loop+0x130/0x1ac (PC) Jun 30 03:29:47.341699 (XEN) [<00225cb8>] rcu_needs_cpu+0x40/0x60 (LR) Jun 30 03:29:47.341725 (XEN) [<002680f4>] start_secondary+0x204/0x20c Jun 30 03:29:47.353627 (XEN) Jun 30 03:29:47.353636 Jun 30 03:29:49.071526 (XEN) 'e' pressed -> dumping event-channel info Jun 30 03:29:49.097714 (XEN) Event channel information for domain 0: Jun 30 03:29:49.097747 (XEN) Polling vCPUs: {} Jun 30 03:29:49.097770 (XEN) port Jun 30 03:29:49.099028 [p/m/s] Jun 30 03:29:49.109700 (XEN) 1 [0/0/ - ]: s=3 n=1 x=0 d=0 p=4 Jun 30 03:29:49.109731 (XEN) 2 [0/0/ - ]: s=5 n=0 x=0 v=2 Jun 30 03:29:49.109756 (XEN) 3 [0/0/ - ]: s=5 n=1 x=0 v=3 Jun 30 03:29:49.121671 (XEN) 4 [0/0/ - ]: s=3 n=0 x=0 d=0 p=1 Jun 30 03:29:49.121704 Jun 30 03:29:51.074787 (XEN) gnttab_usage_print_all [ key 'g' pressed Jun 30 03:29:51.091763 (XEN) -------- active -------- -------- shared -------- Jun 30 03:29:51.091778 (XEN) [re Jun 30 03:29:51.092908 f] localdom mfn pin localdom gmfn flags Jun 30 03:29:51.104620 (XEN) grant-table for remote d0 (v1) Jun 30 03:29:51.104631 (XEN) 1 frames (64 max), 8 maptrack frames (1024 max) Jun 30 03:29:51.116480 (XEN) no active grant table entries Jun 30 03:29:51.116480 (XEN) gnttab_usage_print_all ] done Jun 30 03:29:51.116480 Jun 30 03:29:53.071332 Jun 30 03:29:54.880014 Jun 30 03:29:55.073605 (XEN) Physical memory information: Jun 30 03:29:55.092594 (XEN) Xen heap: 65096kB free Jun 30 03:29:55.092594 (XEN) heap[19]: 523332kB free Jun 30 03:29:55.092594 (XEN) heap[20]: 966408kB fr Jun 30 03:29:55.094331 ee Jun 30 03:29:55.104558 (XEN) Dom heap: 1489740kB free Jun 30 03:29:55.104617 Jun 30 03:29:57.082856 Jun 30 03:29:58.887906 Jun 30 03:29:59.078481 (XEN) sched_smt_power_savings: disabled Jun 30 03:29:59.096677 (XEN) NOW=3094394077750 Jun 30 03:29:59.096726 (XEN) Online Cpus: 0-1 Jun 30 03:29:59.096750 (XEN) Cpupool 0: Jun 30 03:29:59.096771 (XEN) Cpus: 0-1 Jun 30 03:29:59.096792 (XEN) Sched Jun 30 03:29:59.098109 uling granularity: cpu, 1 CPU per sched-resource Jun 30 03:29:59.108563 (XEN) Scheduler: SMP Credit Scheduler rev2 (credit2) Jun 30 03:29:59.108594 (XEN) Active queues: 1 Jun 30 03:29:59.108616 (XEN) default-weight = 256 Jun 30 03:29:59.120627 (XEN) Runqueue 0: Jun 30 03:29:59.120656 (XEN) ncpus = 2 Jun 30 03:29:59.120680 (XEN) cpus = 0-1 Jun 30 03:29:59.120702 (XEN) max_weight = 256 Jun 30 03:29:59.132628 (XEN) pick_bias = 0 Jun 30 03:29:59.132660 (XEN) instload = 0 Jun 30 03:29:59.132684 (XEN) aveload = 2074 (~0%) Jun 30 03:29:59.132708 (XEN) idlers: 2 Jun 30 03:29:59.132730 (XEN) tickled: 0 Jun 30 03:29:59.144618 (XEN) fully idle cores: 2 Jun 30 03:29:59.144633 (XEN) Domain info: Jun 30 03:29:59.144633 (XEN) Domain: 0 w 256 c 0 v 2 Jun 30 03:29:59.144633 (XEN) 1: [0.0] flags=0 cpu=1 credit=7634547 [w=256] load=2287 (~0%) Jun 30 03:29:59.156516 (XEN) 2: [0.1] flags=0 cpu=0 credit=10500000 [w=256] load=502 (~0%) Jun 30 03:29:59.156516 (XEN) Runqueue 0: Jun 30 03:29:59.156516 (XEN) CPU[00] runq=0, sibling={0}, core={0-1} Jun 30 03:29:59.168495 (XEN) CPU[01] runq=0, sibling={1}, core={0-1} Jun 30 03:29:59.168495 (XEN) RUNQ: Jun 30 03:29:59.168495 (XEN) 0: [0.0] flags=0 cpu=1 credit=7634547 [w=256] load=2260 (~0%) Jun 30 03:29:59.180506 (XEN) CPUs info: Jun 30 03:29:59.180506 (XEN) CPU[00] current=d[IDLE]v0, curr=d[IDLE]v0, prev=NULL Jun 30 03:29:59.180506 (XEN) CPU[01] current=d[IDLE]v1, curr=d[IDLE]v1, prev=NULL Jun 30 03:29:59.192538 Jun 30 03:30:01.091028 Jun 30 03:30:02.894645 Jun 30 03:30:03.110637 (XEN) Synced stime skew: max=83ns avg=83ns samples=1 current=83ns Jun 30 03:30:03.128559 (XEN) Synced cycles skew: max=1 avg=1 samples=1 current=1 Jun 30 03:30:03.128559 Jun 30 03:30:03.129977 Jun 30 03:30:05.147409 Jun 30 03:30:06.924754 Jun 30 03:30:07.139824 Jun 30 03:30:08.930247 Jun 30 03:30:09.169254 Jun 30 03:30:10.935669 Jun 30 03:30:21.146331 (XEN) 'q' pressed -> dumping domain info (now = 3116465286583) Jun 30 03:30:21.168641 (XEN) General information for domain 0: Jun 30 03:30:21.168707 (XEN) refcnt=3 dying=0 pause_count=0 Jun 30 03:30:21.168729 ( Jun 30 03:30:21.170920 XEN) nr_pages=131072 xenheap_pages=2 dirty_cpus={} max_pages=131072 Jun 30 03:30:21.180360 (XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=00000020 Jun 30 03:30:21.192578 (XEN) p2m mappings for domain 0 (vmid 1): Jun 30 03:30:21.192578 (XEN) 1G mappings: 0 (shattered 0) Jun 30 03:30:21.192578 (XEN) 2M mappings: 231 (shattered 25) Jun 30 03:30:21.192578 (XEN) 4K mappings: 5481 Jun 30 03:30:21.204570 (XEN) Rangesets belonging to domain 0: Jun 30 03:30:21.204570 (XEN) Interrupts { 32-72, 74, 77-79, 82-84, 86, 88-100, 103-104, 107-110, 114, 116-120, 123, 126-128, 138, 144, 146-147, 149-151, 156 } Jun 30 03:30:21.216634 (XEN) I/O Memory { 2020-2050, 3810-3811, 3830-3831, 3860-3861, 10000-10001, 10010-10045, 10050-10055, 10060-10061, 101b0-101b1, 101d0-101d1, 101e0-101e1, 10440-10441, 10800-10801, 10830-10831, 10850-10851, 10a60-10a61, 10d10-10d11, 11000-11010, 11200-11201, 11210-11211, 11400-11401, 11800-11805, 11c00-11c01, 11c10-11c11, 11d40-11d41, 11f20-11f21, 12000-12010, 12100-12101, 12110-12111, 12120-12121, 12130-12131, 12170-12171, 121a0-121a1, 121b0-121b1, 121d0-121d1, 12200-12201, 12210-12211, 12220-12221, 12230-12231, 12250-12251, 122f0-122f1, 12c00-12c01, 12c10-12c11, 12c30-12c31, 12c60-12c61, 12c70-12c71, 12c80-12c81, 12c90-12c91, 12ca0-12ca1, 12cb0-12cb1, 12cc0-12cc1, 12cd0-12cd1, 12ce0-12ce1, 12d10-12d11, 12d20-12d21, 12d30-12d31, 12d40-12d41, 12d60-12d61, 12d70-12d71, 12dd0-12dd1, 13260-13261, 13270-13271, 13280-13281, 13290-13291, 132a0-132a1, 132b0-132b1, 132c0-132c1, 132d0-132d1, 132e0-132e1, 132f0-132f1, 13400-13401, 13c40-13c41, 13c50-13c51, 13e00-13e01, 13e10-13e11, 13e20-13e21, 13e30-13e31, 13e80-13e81, 13e90-13e91, 13ea0-13ea1, 13eb0-13eb1, 14400-14440, 14450-14460, 14500-14510, 14530-145a0, 145b0-145b1, 14640-14641, 14650-14651 } Jun 30 03:30:21.312788 (XEN) NODE affinity for domain 0: [0] Jun 30 03:30:21.324747 (XEN) VCPU information and callbacks for domain 0: Jun 30 03:30:21.324807 (XEN) UNIT0 affinities: hard={0-1} soft={0-1} Jun 30 03:30:21.324854 (XEN) VCPU0: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Jun 30 03:30:21.336812 (XEN) pause_count=0 pause_flags=1 Jun 30 03:30:21.336870 (XEN) GICH_LRs (vcpu 0) mask=0 Jun 30 03:30:21.336914 (XEN) VCPU_LR[0]=0 Jun 30 03:30:21.348722 (XEN) VCPU_LR[1]=0 Jun 30 03:30:21.348778 (XEN) VCPU_LR[2]=0 Jun 30 03:30:21.348819 (XEN) VCPU_LR[3]=0 Jun 30 03:30:21.348859 (XEN) No periodic timer Jun 30 03:30:21.348900 (XEN) UNIT1 affinities: hard={0-1} soft={0-1} Jun 30 03:30:21.360749 (XEN) VCPU1: CPU0 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Jun 30 03:30:21.360812 (XEN) pause_count=0 pause_flags=1 Jun 30 03:30:21.360857 (XEN) GICH_LRs (vcpu 1) mask=0 Jun 30 03:30:21.372679 (XEN) VCPU_LR[0]=0 Jun 30 03:30:21.372735 (XEN) VCPU_LR[1]=0 Jun 30 03:30:21.372777 (XEN) VCPU_LR[2]=0 Jun 30 03:30:21.372817 (XEN) VCPU_LR[3]=0 Jun 30 03:30:21.372857 (XEN) No periodic timer Jun 30 03:30:21.372897 (XEN) Notifying guest 0:0 (virq 1, port 0) Jun 30 03:30:21.384572 (XEN) Notifying guest 0:1 (virq 1, port 0) Jun 30 03:30:21.384572 Jun 30 03:30:33.173157 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 30 03:30:33.194085 Jun 30 03:30:33.194139 arndale-metrocentre login: Jun 30 03:30:33.195984 [ 3209.955534] sd 0:0:0:0: [sda] Synchronizing SCSI cache Jun 30 03:32:00.025729 [ 3209.967197] wake enabled for irq 119 (gpx1-4) Jun 30 03:32:00.037768 [ 3209.970192] wake enabled for irq 120 (gpx1-5) Jun 30 03:32:00.049758 [ 3209.974672] wake enabled for irq 121 (gpx1-6) Jun 30 03:32:00.049819 [ 3209.979044] wake enabled for irq 122 (gpx1-7) Jun 30 03:32:00.049867 [ 3209.983510] wake enabled for irq 123 (gpx2-0) Jun 30 03:32:00.061732 [ 3209.987898] wake enabled for irq 124 (gpx2-1) Jun 30 03:32:00.061793 [ 3209.992693] reboot: Rest Jun 30 03:32:00.401903 Jun 30 03:32:00.401958 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 03:32:00.402010 Jun 30 03:32:00.402047 CPU: Exynos5250@1000MHz Jun 30 03:32:00.409730 Jun 30 03:32:00.409782 Board: Arndale Jun 30 03:32:00.409825 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 03:32:00.409873 ready Jun 30 03:32:00.421604 DRAM: 2 GiB Jun 30 03:32:00.421604 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 03:32:00.437738 trace: enabled Jun 30 03:32:00.469744 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 03:32:00.829697 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 03:32:00.889756 In: serial Jun 30 03:32:00.889810 Out: serial Jun 30 03:32:00.889852 Err: serial Jun 30 03:32:00.889891 SCSI: ARNDALE SCSI INIT Jun 30 03:32:00.889934 Target spinup took 0 ms. Jun 30 03:32:00.901688 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 03:32:00.901722 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 03:32:00.913762 Net: Net Initialization Skipped Jun 30 03:32:00.913849 No ethernet found. Jun 30 03:32:00.913894 Hostname: arndale-metrocentre Jun 30 03:32:00.913937 Hit any key to stop autoboot: 2  1  0 Jun 30 03:32:02.845787 (Re)start USB... Jun 30 03:32:02.845860 USB0: USB EHCI 1.00 Jun 30 03:32:02.845902 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 03:32:08.437750 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 03:32:08.449776 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 03:32:08.893782 Waiting for Ethernet connection... done. Jun 30 03:32:10.585713 BOOTP broadcast 1 Jun 30 03:32:10.585776 BOOTP broadcast 2 Jun 30 03:32:11.777746 DHCP client bound to address 10.149.64.44 (1244 ms) Jun 30 03:32:11.789783 Using asx0 device Jun 30 03:32:11.789852 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 03:32:11.789903 Filename 'pxelinux.0'. Jun 30 03:32:11.789945 Load address: 0x43e00000 Jun 30 03:32:11.801708 Loading: *### Jun 30 03:32:11.813727 2.5 MiB/s Jun 30 03:32:11.813780 done Jun 30 03:32:11.813819 Bytes transferred = 42430 (a5be hex) Jun 30 03:32:11.813863 missing environment variable: pxeuuid Jun 30 03:32:11.825751 Retrieving file: pxelinux.cfg/0A95402C Jun 30 03:32:11.825808 Using asx0 device Jun 30 03:32:11.825850 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 03:32:11.837708 Filename 'pxelinux.cfg/0A95402C'. Jun 30 03:32:11.837740 Load address: 0x51000000 Jun 30 03:32:11.837763 Loading: *# Jun 30 03:32:11.837784 716.8 KiB/s Jun 30 03:32:11.837806 done Jun 30 03:32:11.837826 Bytes transferred = 734 (2de hex) Jun 30 03:32:11.837849 Config file found Jun 30 03:32:11.849772 Ignoring unknown command: serial Jun 30 03:32:11.849829 1: ^Overwrite Jun 30 03:32:11.849870 Retrieving file: /osstest/tmp//arndale-metrocentre--initrd.gz Jun 30 03:32:11.849917 Using asx0 device Jun 30 03:32:11.861756 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 03:32:11.861818 Filename '/osstest/tmp//arndale-metrocentre--initrd.gz'. Jun 30 03:32:11.861866 Load address: 0x43300000 Jun 30 03:32:11.873713 Loading: *################################################################# Jun 30 03:32:12.173705 ################################################################# Jun 30 03:32:12.473713 ################################################################# Jun 30 03:32:12.761685 ################################################################# Jun 30 03:32:13.137655 ################################################################# Jun 30 03:32:13.440376 ################################################################# Jun 30 03:32:13.756376 ################################################################# Jun 30 03:32:14.036516 ################################################################# Jun 30 03:32:14.336372 ################################################################# Jun 30 03:32:14.624377 ################################################################# Jun 30 03:32:14.888493 ################################################################# Jun 30 03:32:15.152366 ################################################################# Jun 30 03:32:15.428379 ################################################################# Jun 30 03:32:15.696596 ################################################################# Jun 30 03:32:15.996319 ################################################################# Jun 30 03:32:16.296378 ################################################################# Jun 30 03:32:16.572374 ################################################################# Jun 30 03:32:16.836464 ################################################################# Jun 30 03:32:17.104377 ################################################################# Jun 30 03:32:17.404378 ################################################################# Jun 30 03:32:17.692379 ################################################################# Jun 30 03:32:17.980384 ################################################################# Jun 30 03:32:18.272381 ################################################################# Jun 30 03:32:18.548559 ################################################################# Jun 30 03:32:18.824426 ################################################################# Jun 30 03:32:19.128514 ################################################################# Jun 30 03:32:19.452473 ################################################################# Jun 30 03:32:19.777745 ###################################### Jun 30 03:32:19.957745 3 MiB/s Jun 30 03:32:19.957806 done Jun 30 03:32:19.957872 Bytes transferred = 26310351 (19176cf hex) Jun 30 03:32:19.957926 Retrieving file: /osstest/debian-installer/armhf/2024-03-26-bookworm/linux Jun 30 03:32:19.969791 Using asx0 device Jun 30 03:32:19.981778 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 03:32:19.981834 Filename '/osstest/debian-installer/armhf/2024-03-26-bookworm/linux'. Jun 30 03:32:19.993765 Load address: 0x42000000 Jun 30 03:32:19.993820 Loading: *################################################################# Jun 30 03:32:20.317717 ################################################################# Jun 30 03:32:20.629740 ################################################################# Jun 30 03:32:20.957691 ################################################################# Jun 30 03:32:21.281722 ################################################################# Jun 30 03:32:21.593650 ############################################# Jun 30 03:32:21.797688 2.7 MiB/s Jun 30 03:32:21.809754 done Jun 30 03:32:21.809802 Bytes transferred = 5423616 (52c200 hex) Jun 30 03:32:21.809850 append: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-metrocentre url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=42949 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-metrocentre--initrd.gz --- console=ttySAC2,115200n8 Jun 30 03:32:21.845790 Retrieving file: /osstest/debian-installer/armhf/2024-03-26-bookworm/dtbs/exynos5250-arndale.dtb Jun 30 03:32:21.857705 Using asx0 device Jun 30 03:32:21.857736 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 03:32:21.869666 Filename '/osstest/debian-installer/armhf/2024-03-26-bookworm/dtbs/exynos5250-arndale.dtb'. Jun 30 03:32:21.869725 Load address: 0x43000000 Jun 30 03:32:21.881689 Loading: *#### Jun 30 03:32:21.893745 2.6 MiB/s Jun 30 03:32:21.893774 done Jun 30 03:32:21.893796 Bytes transferred = 46686 (b65e hex) Jun 30 03:32:21.893820 Kernel image @ 0x42000000 [ 0x000000 - 0x52c200 ] Jun 30 03:32:21.905784 ## Flattened Device Tree blob at 43000000 Jun 30 03:32:21.905866 Booting using the fdt blob at 0x43000000 Jun 30 03:32:21.905943 Loading Ramdisk to 4e6e8000, end 4ffff6cf ... OK Jun 30 03:32:22.337791 Loading Device Tree to 4e6d9000, end 4e6e765d ... OK Jun 30 03:32:22.337859 Jun 30 03:32:22.349745 Starting kernel ...(fake run for tracing) Jun 30 03:32:22.349805 Jun 30 03:32:22.349844 Jun 30 03:32:22.349881 Starting kernel ... Jun 30 03:32:22.349922 Jun 30 03:32:22.349959 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 03:32:28.457786 [ 0.000000] Linux version 6.1.0-18-armmp (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.76-1 (2024-02-01) Jun 30 03:32:28.481768 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 30 03:32:28.481832 [ 0.000000] CPU: div instructions available: patching division code Jun 30 03:32:28.493782 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 03:32:28.493846 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 03:32:28.505817 [ 0.000000] Memory policy: Data cache writealloc Jun 30 03:32:28.505877 [ 0.000000] efi: UEFI not found. Jun 30 03:32:28.517772 [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 Jun 30 03:32:28.517832 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 03:32:28.517877 [ 0.000000] Zone ranges: Jun 30 03:32:28.529759 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Jun 30 03:32:28.529820 [ 0.000000] Normal empty Jun 30 03:32:28.529863 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Jun 30 03:32:28.541771 [ 0.000000] Movable zone start for each node Jun 30 03:32:28.541830 [ 0.000000] Early memory node ranges Jun 30 03:32:28.553766 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 03:32:28.553827 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 03:32:28.565762 [ 0.000000] percpu: Embedded 18 pages/cpu s41620 r8192 d23916 u73728 Jun 30 03:32:28.565825 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Jun 30 03:32:28.577754 [ 0.000000] Kernel command line: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-metrocentre url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=42949 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-metrocentre--initrd.gz --- console=ttySAC2,115200n8 Jun 30 03:32:28.613802 [ 0.000000] Unknown kernel command line parameters "preseed --- vga=normal auto=true hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=42949 domain=test-lab.xenproject.org", will be passed to user space. Jun 30 03:32:28.661745 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Jun 30 03:32:28.661812 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 03:32:28.673744 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Jun 30 03:32:28.673802 [ 0.000000] Memory: 2015996K/2097152K available (11264K kernel code, 1696K rwdata, 3716K rodata, 2048K init, 378K bss, 64772K reserved, 16384K cma-reserved, 1294332K highmem) Jun 30 03:32:28.697631 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 03:32:28.697662 [ 0.000000] ftrace: allocating 39582 entries in 117 pages Jun 30 03:32:28.709763 [ 0.000000] ftrace: allocated 116 pages with 4 groups Jun 30 03:32:28.709824 [ 0.000000] trace event string verifier disabled Jun 30 03:32:28.721760 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 03:32:28.721821 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Jun 30 03:32:28.721873 [ 0.000000] Rude variant of Tasks RCU enabled. Jun 30 03:32:28.733767 [ 0.000000] Tracing variant of Tasks RCU enabled. Jun 30 03:32:28.733827 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Jun 30 03:32:28.745778 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 03:32:28.745842 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 03:32:28.757853 [ 0.000000] GIC: Using split EOI/Deactivate mode Jun 30 03:32:28.757914 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 03:32:28.769752 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 03:32:28.769808 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Jun 30 03:32:28.781757 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Jun 30 03:32:28.793785 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Jun 30 03:32:28.793856 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Jun 30 03:32:28.805764 [ 0.002642] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Jun 30 03:32:28.805826 [ 0.002656] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 03:32:28.817774 [ 0.002671] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 03:32:28.829670 [ 0.002683] Ignoring duplicate/late registration of read_current_timer delay Jun 30 03:32:28.841710 [ 0.003049] Console: colour dummy device 80x30 Jun 30 03:32:28.841762 [ 0.003089] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Jun 30 03:32:28.853671 [ 0.003103] CPU: Testing write buffer coherency: ok Jun 30 03:32:28.853704 [ 0.003144] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 03:32:28.867958 [ 0.003152] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 03:32:28.877656 [ 0.003159] pid_max: default: 32768 minimum: 301 Jun 30 03:32:28.877656 [ 0.003516] LSM: Security Framework initializing Jun 30 03:32:28.889701 [ 0.003589] landlock: Up and running. Jun 30 03:32:28.889738 [ 0.003593] Yama: disabled by default; enable with sysctl kernel.yama.* Jun 30 03:32:28.889766 [ 0.003782] AppArmor: AppArmor initialized Jun 30 03:32:28.901662 [ 0.003795] TOMOYO Linux initialized Jun 30 03:32:28.901694 [ 0.003838] LSM support for eBPF active Jun 30 03:32:28.901718 [ 0.004082] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 03:32:28.913755 [ 0.004096] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 03:32:28.925681 [ 0.005533] /cpus/cpu@0 missing clock-frequency property Jun 30 03:32:28.925742 [ 0.005560] /cpus/cpu@1 missing clock-frequency property Jun 30 03:32:28.925790 [ 0.005573] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 03:32:28.937690 [ 0.006525] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 03:32:28.949745 [ 0.006532] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 03:32:28.949806 [ 0.006635] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 03:32:28.961716 [ 0.006641] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 03:32:28.961749 [ 0.006790] Setting up static identity map for 0x40300000 - 0x403000ac Jun 30 03:32:28.973743 [ 0.007960] rcu: Hierarchical SRCU implementation. Jun 30 03:32:28.973813 [ 0.007966] rcu: Max phase no-delay instances is 1000. Jun 30 03:32:28.985749 [ 0.010108] EFI services will not be available. Jun 30 03:32:28.985810 [ 0.010455] smp: Bringing up secondary CPUs ... Jun 30 03:32:28.985857 [ 0.011206] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 03:32:28.997759 [ 0.011218] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 03:32:29.009774 [ 0.011348] smp: Brought up 1 node, 2 CPUs Jun 30 03:32:29.009834 [ 0.011356] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 03:32:29.009887 [ 0.011364] CPU: All CPU(s) started in HYP mode. Jun 30 03:32:29.021714 [ 0.011368] CPU: Virtualization extensions available. Jun 30 03:32:29.021768 [ 0.012031] devtmpfs: initialized Jun 30 03:32:29.021812 [ 0.023115] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 03:32:29.033729 [ 0.023368] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Jun 30 03:32:29.045739 [ 0.023393] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 03:32:29.045803 [ 0.023876] pinctrl core: initialized pinctrl subsystem Jun 30 03:32:29.057716 [ 0.024608] DMI not present or invalid. Jun 30 03:32:29.057830 [ 0.025287] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 03:32:29.069748 [ 0.030661] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 03:32:29.069812 [ 0.032211] audit: initializing netlink subsys (disabled) Jun 30 03:32:29.081708 [ 0.032414] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 Jun 30 03:32:29.081784 [ 0.033581] thermal_sys: Registered thermal governor 'fair_share' Jun 30 03:32:29.093704 [ 0.033588] thermal_sys: Registered thermal governor 'bang_bang' Jun 30 03:32:29.093759 [ 0.033593] thermal_sys: Registered thermal governor 'step_wise' Jun 30 03:32:29.105721 [ 0.033598] thermal_sys: Registered thermal governor 'user_space' Jun 30 03:32:29.105778 [ 0.033602] thermal_sys: Registered thermal governor 'power_allocator' Jun 30 03:32:29.117706 [ 0.033968] No ATAGs? Jun 30 03:32:29.117754 [ 0.034036] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jun 30 03:32:29.129728 [ 0.034045] hw-breakpoint: maximum watchpoint size is 8 bytes. Jun 30 03:32:29.129783 [ 0.035133] Serial: AMBA PL011 UART driver Jun 30 03:32:29.141692 [ 0.091503] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Jun 30 03:32:29.141753 [ 0.102483] iommu: Default domain type: Translated Jun 30 03:32:29.153699 [ 0.102491] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 03:32:29.153729 [ 0.103475] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Jun 30 03:32:29.165700 [ 0.104040] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 03:32:29.165749 [ 0.104051] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 03:32:29.177622 [ 0.104700] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 03:32:29.177656 [ 0.104730] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 03:32:29.189708 [ 0.104912] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 03:32:29.201618 [ 0.105266] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 03:32:29.201646 [ 0.105277] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 03:32:29.201672 [ 0.105669] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 03:32:29.213694 [ 0.105962] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 03:32:29.213746 [ 0.105972] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 03:32:29.225706 [ 0.106249] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 03:32:29.225758 [ 0.106349] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 03:32:29.237760 [ 0.106358] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 03:32:29.237794 [ 0.106556] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 03:32:29.249764 [ 0.106755] pps_core: LinuxPPS API ver. 1 registered Jun 30 03:32:29.249825 [ 0.106760] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 03:32:29.261767 [ 0.106776] PTP clock support registered Jun 30 03:32:29.261824 [ 0.108266] NetLabel: Initializing Jun 30 03:32:29.261869 [ 0.108272] NetLabel: domain hash size = 128 Jun 30 03:32:29.273639 [ 0.108277] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Jun 30 03:32:29.273639 [ 0.108348] NetLabel: unlabeled traffic allowed by default Jun 30 03:32:29.285762 [ 0.108507] vgaarb: loaded Jun 30 03:32:29.285823 [ 0.109184] clocksource: Switched to clocksource mct-frc Jun 30 03:32:29.285872 [ 0.178077] VFS: Disk quotas dquot_6.6.0 Jun 30 03:32:29.297777 [ 0.178169] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jun 30 03:32:29.297813 [ 0.178905] AppArmor: AppArmor Filesystem Enabled Jun 30 03:32:29.309754 [ 0.188001] NET: Registered PF_INET protocol family Jun 30 03:32:29.309815 [ 0.188211] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Jun 30 03:32:29.321763 [ 0.189846] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 03:32:29.321851 [ 0.189936] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 03:32:29.333812 [ 0.189960] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Jun 30 03:32:29.333879 [ 0.190055] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Jun 30 03:32:29.345712 [ 0.190284] TCP: Hash tables configured (established 8192 bind 8192) Jun 30 03:32:29.345786 [ 0.190511] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Jun 30 03:32:29.357791 [ 0.190596] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 03:32:29.369756 [ 0.190637] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 03:32:29.369821 [ 0.190834] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 03:32:29.381729 [ 0.190868] NET: Registered PF_XDP protocol family Jun 30 03:32:29.381790 [ 0.190878] PCI: CLS 0 bytes, default 64 Jun 30 03:32:29.381836 [ 0.191400] Trying to unpack rootfs image as initramfs... Jun 30 03:32:29.393756 [ 0.191810] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Jun 30 03:32:29.405743 [ 0.192013] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Jun 30 03:32:29.405814 [ 0.193638] Initialise system trusted keyrings Jun 30 03:32:29.417752 [ 0.193714] Key type blacklist registered Jun 30 03:32:29.417812 [ 0.193971] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Jun 30 03:32:29.417862 [ 0.201155] zbud: loaded Jun 30 03:32:29.429755 [ 0.202277] integrity: Platform Keyring initialized Jun 30 03:32:29.429816 [ 0.202315] integrity: Machine keyring initialized Jun 30 03:32:29.429862 [ 0.202322] Key type asymmetric registered Jun 30 03:32:29.441733 [ 0.202329] Asymmetric key parser 'x509' registered Jun 30 03:32:29.441792 [ 1.562799] Freeing initrd memory: 25696K Jun 30 03:32:29.453752 [ 1.574546] alg: self-tests for CTR-KDF (hmac(sha256)) passed Jun 30 03:32:29.453815 [ 1.574831] bounce: pool size: 64 pages Jun 30 03:32:29.453861 [ 1.574994] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Jun 30 03:32:29.465771 [ 1.575158] io scheduler mq-deadline registered Jun 30 03:32:29.465829 [ 1.580314] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Jun 30 03:32:29.477777 [ 1.601241] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 03:32:29.489760 [ 1.601253] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 03:32:29.489831 [ 1.603555] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 03:32:29.501760 [ 1.603565] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 03:32:29.513762 [ 1.604356] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 03:32:29.513830 [ 1.604365] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 03:32:29.525773 [ 1.605231] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 03:32:29.537766 [ 1.605240] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 03:32:29.549751 [ 1.607586] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 03:32:29.549824 [ 1.610420] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 03:32:29.561796 [ 1.613137] Serial: AMBA driver Jun 30 03:32:29.561871 [ 1.613436] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 03:32:29.573761 [ 1.613915] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 03:32:29.585758 [ 1.614387] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 03:32:29.585868 [ 2.745277] printk: console [ttySAC2] enabled Jun 30 03:32:29.597801 [ 2.750092] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Jun 30 03:32:29.597875 [ 2.760747] STM32 USART driver initialized Jun 30 03:32:29.609647 [ 2.774941] mousedev: PS/2 mouse device common for all mice Jun 30 03:32:29.621669 [ 2.806092] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 03:32:29.657731 [ 2.814692] s5m-rtc s5m-rtc: setting system clock to 2024-06-30T03:32:32 UTC (1719718352) Jun 30 03:32:29.669615 [ 2.824569] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Jun 30 03:32:29.669646 [ 2.832029] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 03:32:29.681628 [ 2.840001] NET: Registered PF_INET6 protocol family Jun 30 03:32:29.693572 [ 2.853916] Segment Routing with IPv6 Jun 30 03:32:29.705753 [ 2.856156] In-situ OAM (IOAM) with IPv6 Jun 30 03:32:29.705812 [ 2.860112] mip6: Mobile IPv6 Jun 30 03:32:29.705856 [ 2.862992] NET: Registered PF_PACKET protocol family Jun 30 03:32:29.717750 [ 2.868137] mpls_gso: MPLS GSO support Jun 30 03:32:29.717810 [ 2.872360] ThumbEE CPU extension supported. Jun 30 03:32:29.717857 [ 2.876023] Registering SWP/SWPB emulation handler Jun 30 03:32:29.729750 [ 2.881275] registered taskstats version 1 Jun 30 03:32:29.729811 [ 2.884864] Loading compiled-in X.509 certificates Jun 30 03:32:29.729859 [ 3.341798] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Jun 30 03:32:30.197756 [ 3.349105] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Jun 30 03:32:30.209723 [ 3.360124] zswap: loaded using pool lzo/zbud Jun 30 03:32:30.209784 [ 3.364170] Key type .fscrypt registered Jun 30 03:32:30.209829 [ 3.367444] Key type fscrypt-provisioning registered Jun 30 03:32:30.221695 [ 3.381469] Key type encrypted registered Jun 30 03:32:30.233749 [ 3.384012] AppArmor: AppArmor sha1 policy hashing enabled Jun 30 03:32:30.233820 [ 3.389527] ima: No TPM chip found, activating TPM-bypass! Jun 30 03:32:30.233889 [ 3.394961] ima: Allocated hash algorithm: sha256 Jun 30 03:32:30.245661 [ 3.399673] ima: No architecture policies found Jun 30 03:32:30.245693 [ 3.404227] evm: Initialising EVM extended attributes: Jun 30 03:32:30.257732 [ 3.409279] evm: security.selinux Jun 30 03:32:30.257784 [ 3.412561] evm: security.SMACK64 (disabled) Jun 30 03:32:30.257829 [ 3.416828] evm: security.SMACK64EXEC (disabled) Jun 30 03:32:30.269728 [ 3.421429] evm: security.SMACK64TRANSMUTE (disabled) Jun 30 03:32:30.269781 [ 3.426463] evm: security.SMACK64MMAP (disabled) Jun 30 03:32:30.281746 [ 3.431063] evm: security.apparmor Jun 30 03:32:30.281806 [ 3.434448] evm: security.ima Jun 30 03:32:30.281850 [ 3.437399] evm: security.capability Jun 30 03:32:30.281899 [ 3.440945] evm: HMAC attrs: 0x1 Jun 30 03:32:30.293661 [ 4.025021] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 03:32:30.869828 [ 4.051283] Freeing unused kernel image (initmem) memory: 2048K Jun 30 03:32:30.905744 [ 4.056156] Checked W+X mappings: passed, no W+X pages found Jun 30 03:32:30.905808 [ 4.061411] Run /init as init process Jun 30 03:32:30.905853 [ 4.653977] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 03:32:31.505814 [ 4.668516] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 03:32:31.517750 [ 4.680714] usbcore: registered new interface driver usbfs Jun 30 03:32:31.529695 [ 4.712457] usbcore: registered new interface driver hub Jun 30 03:32:31.565714 [ 4.723452] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 03:32:31.577752 [ 4.734207] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 03:32:31.589751 [ 4.741285] usbcore: registered new device driver usb Jun 30 03:32:31.589810 [ 4.801332] phy phy-12130000.phy.1: phy_power_on was called before phy_init Jun 30 03:32:31.649776 [ 4.803955] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 03:32:31.661730 [ 4.817117] phy phy-12130000.phy.1: phy_power_on was called before phy_init Jun 30 03:32:31.673690 [ 4.843006] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 03:32:31.697726 [ 4.847481] exynos-ohci 12120000.usb: USB Host Controller Jun 30 03:32:31.697788 [ 4.860355] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Jun 30 03:32:31.709737 [ 4.872382] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Jun 30 03:32:31.721750 [ 4.893161] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Jun 30 03:32:31.745727 [ 4.905461] usb3503 usb-hub: switched to HUB mode Jun 30 03:32:31.757753 [ 4.908712] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 03:32:31.757814 [ 4.915937] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Jun 30 03:32:31.769717 [ 4.933296] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 03:32:31.781728 [ 4.940669] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 03:32:31.793767 [ 4.947510] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 03:32:31.805764 [ 4.954693] usb usb2: Product: EHCI Host Controller Jun 30 03:32:31.805824 [ 4.959550] usb usb2: Manufacturer: Linux 6.1.0-18-armmp ehci_hcd Jun 30 03:32:31.817750 [ 4.965633] usb usb2: SerialNumber: 12110000.usb Jun 30 03:32:31.817810 [ 4.971241] hub 2-0:1.0: USB hub found Jun 30 03:32:31.817855 [ 4.975549] hub 2-0:1.0: 3 ports detected Jun 30 03:32:31.829719 [ 4.982925] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Jun 30 03:32:31.829763 [ 4.989756] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 03:32:31.841770 [ 4.996967] usb usb1: Product: USB Host Controller Jun 30 03:32:31.841829 [ 5.001720] usb usb1: Manufacturer: Linux 6.1.0-18-armmp ohci_hcd Jun 30 03:32:31.853817 [ 5.007791] usb usb1: SerialNumber: 12120000.usb Jun 30 03:32:31.853877 [ 5.085851] hub 1-0:1.0: USB hub found Jun 30 03:32:31.937715 [ 5.088908] hub 1-0:1.0: 3 ports detected Jun 30 03:32:31.937776 [ 5.154242] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 03:32:32.009740 [ 5.158312] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 03:32:32.009740 [ 5.166408] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 Jun 30 03:32:32.021809 [ 5.175521] xhci-hcd xhci-hcd.2.auto: irq 108, io mem 0x12000000 Jun 30 03:32:32.033744 [ 5.185155] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 03:32:32.033806 [ 5.189204] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 03:32:32.045822 [ 5.196842] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 03:32:32.045884 [ 5.203503] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 03:32:32.057899 [ 5.211590] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 03:32:32.057953 [ 5.218788] usb usb3: Product: xHCI Host Controller Jun 30 03:32:32.070698 [ 5.223654] usb usb3: Manufacturer: Linux 6.1.0-18-armmp xhci-hcd Jun 30 03:32:32.081696 [ 5.229732] usb usb3: SerialNumber: xhci-hcd.2.auto Jun 30 03:32:32.081767 [ 5.234612] usb 2-3: new high-speed USB device number 2 using exynos-ehci Jun 30 03:32:32.093731 [ 5.241926] hub 3-0:1.0: USB hub found Jun 30 03:32:32.093806 [ 5.245132] hub 3-0:1.0: 1 port detected Jun 30 03:32:32.093853 [ 5.249649] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 03:32:32.105718 [ 5.257258] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Jun 30 03:32:32.117721 [ 5.265323] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 03:32:32.117781 [ 5.272536] usb usb4: Product: xHCI Host Controller Jun 30 03:32:32.129664 [ 5.277389] usb usb4: Manufacturer: Linux 6.1.0-18-armmp xhci-hcd Jun 30 03:32:32.129664 [ 5.283465] usb usb4: SerialNumber: xhci-hcd.2.auto Jun 30 03:32:32.141708 [ 5.288962] hub 4-0:1.0: USB hub found Jun 30 03:32:32.141764 [ 5.292095] hub 4-0:1.0: 1 port detected Jun 30 03:32:32.141808 [ 5.401583] usb 2-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Jun 30 03:32:32.261734 [ 5.408328] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jun 30 03:32:32.261801 [ 5.418304] hub 2-3:1.0: USB hub found Jun 30 03:32:32.273718 [ 5.420707] hub 2-3:1.0: 3 ports detected Jun 30 03:32:32.273780 Starting system log daemon: syslogd, klogd. Jun 30 03:32:32.405712 /var/run/utmp: No such file or directory Jun 30 03:32:34.241694 [?1h=(B   Jun 30 03:32:34.289666  Jun 30 03:32:34.301678 [  (-*) ][ Jun 30  3:32 ] Jun 30 03:32:34.313770 [  (0*start) ][ Jun 30  3:32 ] Jun 30 03:32:34.325660 [  (0*start) ][ Jun 30  3:32 ] Jun 30 03:32:34.337680 [  (0*start) ][ Jun 30  3:32 ] Jun 30 03:32:34.349776 [  (0*start) ][ Jun 30  3:32 ]                        [  (0*start) ][ Jun 30  3:32 ][  (0*start) ][ Jun 30  3:32 ] Jun 30 03:32:34.409771 [ 0- start  (2*shell) ][ Jun 30  3:32 ] Jun 30 03:32:34.421768 [ 0- start  (2*shell) ][ Jun 30  3:32 ] Jun 30 03:32:34.433777 [ 0- start  (2*shell) ][ Jun 30  3:32 ] Jun 30 03:32:34.445796 [ 0- start  (2*shell) ][ Jun 30  3:32 ]                        [ 0- start  (2*shell) ][ Jun 30  3:32 ][ 0- start  (2*shell) ][ Jun 30  3:32 ] Jun 30 03:32:34.505960 [ 0 start 2- shell  (3*shell) ][ Jun 30  3:32 ] Jun 30 03:32:34.517923 [ 0 start 2- shell  (3*shell) ][ Jun 30  3:32 ] Jun 30 03:32:34.529951 [ 0 start 2- shell  (3*shell) ][ Jun 30  3:32 ] Jun 30 03:32:34.541876 [ 0 start 2- shell  (3*shell) ][ Jun 30  3:32 ]                        [ 0 start 2- shell  (3*shell) ][ Jun 30  3:32 ][ 0 start 2- shell  (3*shell) ][ Jun 30  3:32 ] Jun 30 03:32:34.601882 [ 0 start 2 shell 3- shell  (4*log) ][ Jun 30  3:32 ] Jun 30 03:32:34.613885 [ 0 start 2 shell 3- shell  (4*log) ][ Jun 30  3:32 ] Jun 30 03:32:34.625875 [ 0 start 2 shell 3- shell  (4*log) ][ Jun 30  3:32 ] Jun 30 03:32:34.637900 [ 0 start 2 shell 3- shell  (4*log) ][ Jun 30  3:32 ]                        [ 0 start 2 shell 3- shell  (4*log) ][ Jun 30  3:32 ][ 0 start 2 shell 3- shell  (4*log) ][ Jun 30  3:32 ] Jun 30 03:32:34.697777 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30  3:32 ] Jun 30 03:32:34.709848 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30  3:32 ] Jun 30 03:32:34.733862 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30  3:32 ] Jun 30 03:32:34.745864 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30  3:32 ]                        [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30  3:32 ][ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30  3:32 ] Jun 30 03:32:34.793797 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  3:32 ] Jun 30 03:32:34.817803 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  3:32 ] Jun 30 03:32:34.829680 [  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  3:32 ] Jun 30 03:32:35.277769 Detecting network hardware ... 2%... 95%... 100% Jun 30 03:32:37.005699 Detecting link on eth0; please wait... ... 0%... 10%... 20% Jun 30 03:32:41.925678 Waiting for link-local address... ... 8%... 16%... 25%... 33%... 41%... 50%... 100% Jun 30 03:32:43.725898 Attempting IPv6 autoconfiguration... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 75%... 83%... 91%... 100% Jun 30 03:32:49.793686 Configuring the network with DHCP ... 0%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  3:33 ]... 10%... 20%... 30%... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  3:34 ]... 50%... 60%... 70%... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  3:35 ]... 90%... 100% Jun 30 03:35:19.841721 Configure the network Jun 30 03:35:19.841721 --------------------- Jun 30 03:35:19.841721 Jun 30 03:35:19.841721 Network autoconfiguration failed Jun 30 03:35:19.841721 Jun 30 03:35:19.841721 Your network is probably not using the DHCP protocol. Alternatively, the DHCP Jun 30 03:35:19.853720 server may be slow or some network hardware is not working properly. Jun 30 03:35:19.853842 [Press enter to continue] Jun 30 03:35:19.853909 [  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  3:36 ] [  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  3:37 ] [  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  3:38 ]  Jun 30 03:38:45.797792 Jun 30 03:38:45.797855 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 03:38:45.797904 Jun 30 03:38:45.797938 CPU: Exynos5250@1000MHz Jun 30 03:38:45.809736 Jun 30 03:38:45.809787 Board: Arndale Jun 30 03:38:45.809825 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 03:38:45.809922 ready Jun 30 03:38:45.809990 DRAM: 2 GiB Jun 30 03:38:45.810050 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 03:38:45.833691 trace: enabled Jun 30 03:38:45.869701 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 03:38:46.229709 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 03:38:46.289732 In: serial Jun 30 03:38:46.289788 Out: serial Jun 30 03:38:46.289842 Err: serial Jun 30 03:38:46.289880 SCSI: ARNDALE SCSI INIT Jun 30 03:38:46.289938 Target spinup took 0 ms. Jun 30 03:38:46.301766 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 03:38:46.301822 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 03:38:46.301874 Net: Net Initialization Skipped Jun 30 03:38:46.313767 No ethernet found. Jun 30 03:38:46.313824 Hostname: arndale-metrocentre Jun 30 03:38:46.313869 Hit any key to stop autoboot: 2  1  0 Jun 30 03:38:48.233667 (Re)start USB... Jun 30 03:38:48.233732 USB0: USB EHCI 1.00 Jun 30 03:38:48.245665 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 03:38:53.849615 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 03:38:53.849759 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 03:38:54.297765 Waiting for Ethernet connection... done. Jun 30 03:38:55.937719 BOOTP broadcast 1 Jun 30 03:38:55.937811 BOOTP broadcast 2 Jun 30 03:38:57.521742 DHCP client bound to address 10.149.64.44 (1653 ms) Jun 30 03:38:57.533759 Using asx0 device Jun 30 03:38:57.533816 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 03:38:57.533867 Filename 'pxelinux.0'. Jun 30 03:38:57.533941 Load address: 0x43e00000 Jun 30 03:38:57.545680 Loading: *### Jun 30 03:38:57.557732 2.2 MiB/s Jun 30 03:38:57.557787 done Jun 30 03:38:57.557828 Bytes transferred = 42430 (a5be hex) Jun 30 03:38:57.557897 missing environment variable: pxeuuid Jun 30 03:38:57.569767 Retrieving file: pxelinux.cfg/0A95402C Jun 30 03:38:57.569828 Using asx0 device Jun 30 03:38:57.569927 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 03:38:57.581743 Filename 'pxelinux.cfg/0A95402C'. Jun 30 03:38:57.581804 Load address: 0x51000000 Jun 30 03:38:57.581847 Loading: *# Jun 30 03:38:57.581887 358.4 KiB/s Jun 30 03:38:57.581950 done Jun 30 03:38:57.581989 Bytes transferred = 734 (2de hex) Jun 30 03:38:57.582032 Config file found Jun 30 03:38:57.593761 Ignoring unknown command: serial Jun 30 03:38:57.593820 1: ^Overwrite Jun 30 03:38:57.593884 Retrieving file: /osstest/tmp//arndale-metrocentre--initrd.gz Jun 30 03:38:57.593933 Using asx0 device Jun 30 03:38:57.605762 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 03:38:57.605826 Filename '/osstest/tmp//arndale-metrocentre--initrd.gz'. Jun 30 03:38:57.605876 Load address: 0x43300000 Jun 30 03:38:57.617705 Loading: *################################################################# Jun 30 03:38:57.929656 ################################################################# Jun 30 03:38:58.241717 ################################################################# Jun 30 03:38:58.553680 ################################################################# Jun 30 03:38:58.865696 ################################################################# Jun 30 03:38:59.189687 ################################################################# Jun 30 03:38:59.501712 ################################################################# Jun 30 03:38:59.813700 ################################################################# Jun 30 03:39:00.125755 ################################################################# Jun 30 03:39:00.449691 ################################################################# Jun 30 03:39:00.761695 ################################################################# Jun 30 03:39:01.073549 ################################################################# Jun 30 03:39:01.385680 ################################################################# Jun 30 03:39:01.709702 ################################################################# Jun 30 03:39:02.033674 ################################################################# Jun 30 03:39:02.345689 ################################################################# Jun 30 03:39:02.669664 ################################################################# Jun 30 03:39:02.981666 ################################################################# Jun 30 03:39:03.269682 ################################################################# Jun 30 03:39:03.560527 ################################################################# Jun 30 03:39:03.824523 ################################################################# Jun 30 03:39:04.104346 ################################################################# Jun 30 03:39:04.384390 ################################################################# Jun 30 03:39:05.284588 ################################################################# Jun 30 03:39:05.572562 ################################################################# Jun 30 03:39:05.888710 ################################################################# Jun 30 03:39:06.164503 ################################################################# Jun 30 03:39:06.440712 ###################################### Jun 30 03:39:06.620513 2.7 MiB/s Jun 30 03:39:06.620513 done Jun 30 03:39:06.620513 Bytes transferred = 26310345 (19176c9 hex) Jun 30 03:39:06.632486 Retrieving file: /osstest/debian-installer/armhf/2024-03-26-bookworm/linux Jun 30 03:39:06.644584 Using asx0 device Jun 30 03:39:06.644584 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 03:39:06.644584 Filename '/osstest/debian-installer/armhf/2024-03-26-bookworm/linux'. Jun 30 03:39:06.656556 Load address: 0x42000000 Jun 30 03:39:06.656556 Loading: *################################################################# Jun 30 03:39:06.980536 ################################################################# Jun 30 03:39:07.304485 ################################################################# Jun 30 03:39:07.604498 ################################################################# Jun 30 03:39:07.920487 ################################################################# Jun 30 03:39:08.220732 ############################################# Jun 30 03:39:08.412570 2.8 MiB/s Jun 30 03:39:08.412570 done Jun 30 03:39:08.412570 Bytes transferred = 5423616 (52c200 hex) Jun 30 03:39:08.412570 append: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-metrocentre url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=42949 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-metrocentre--initrd.gz --- console=ttySAC2,115200n8 Jun 30 03:39:08.460604 Retrieving file: /osstest/debian-installer/armhf/2024-03-26-bookworm/dtbs/exynos5250-arndale.dtb Jun 30 03:39:08.472606 Using asx0 device Jun 30 03:39:08.472606 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 03:39:08.472606 Filename '/osstest/debian-installer/armhf/2024-03-26-bookworm/dtbs/exynos5250-arndale.dtb'. Jun 30 03:39:08.484585 Load address: 0x43000000 Jun 30 03:39:08.484585 Loading: *#### Jun 30 03:39:08.508593 2.3 MiB/s Jun 30 03:39:08.508593 done Jun 30 03:39:08.508593 Bytes transferred = 46686 (b65e hex) Jun 30 03:39:08.508593 Kernel image @ 0x42000000 [ 0x000000 - 0x52c200 ] Jun 30 03:39:08.508593 ## Flattened Device Tree blob at 43000000 Jun 30 03:39:08.520596 Booting using the fdt blob at 0x43000000 Jun 30 03:39:08.520596 Loading Ramdisk to 4e6e8000, end 4ffff6c9 ... OK Jun 30 03:39:08.944565 Loading Device Tree to 4e6d9000, end 4e6e765d ... OK Jun 30 03:39:08.956553 Jun 30 03:39:08.956553 Starting kernel ...(fake run for tracing) Jun 30 03:39:08.956553 Jun 30 03:39:08.956553 Jun 30 03:39:08.968515 Starting kernel ... Jun 30 03:39:08.968515 Jun 30 03:39:08.968515 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 03:39:15.064551 [ 0.000000] Linux version 6.1.0-18-armmp (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.76-1 (2024-02-01) Jun 30 03:39:15.088582 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 30 03:39:15.088582 [ 0.000000] CPU: div instructions available: patching division code Jun 30 03:39:15.100666 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 03:39:15.100767 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 03:39:15.112598 [ 0.000000] Memory policy: Data cache writealloc Jun 30 03:39:15.112598 [ 0.000000] efi: UEFI not found. Jun 30 03:39:15.124591 [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 Jun 30 03:39:15.124591 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 03:39:15.124591 [ 0.000000] Zone ranges: Jun 30 03:39:15.136610 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Jun 30 03:39:15.136610 [ 0.000000] Normal empty Jun 30 03:39:15.136610 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Jun 30 03:39:15.148752 [ 0.000000] Movable zone start for each node Jun 30 03:39:15.148831 [ 0.000000] Early memory node ranges Jun 30 03:39:15.148877 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 03:39:15.160750 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 03:39:15.172590 [ 0.000000] percpu: Embedded 18 pages/cpu s41620 r8192 d23916 u73728 Jun 30 03:39:15.172590 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Jun 30 03:39:15.184594 [ 0.000000] Kernel command line: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-metrocentre url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=42949 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-metrocentre--initrd.gz --- console=ttySAC2,115200n8 Jun 30 03:39:15.220766 [ 0.000000] Unknown kernel command line parameters "preseed --- vga=normal auto=true hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=42949 domain=test-lab.xenproject.org", will be passed to user space. Jun 30 03:39:15.268676 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Jun 30 03:39:15.268676 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 03:39:15.280723 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Jun 30 03:39:15.280723 [ 0.000000] Memory: 2015996K/2097152K available (11264K kernel code, 1696K rwdata, 3716K rodata, 2048K init, 378K bss, 64772K reserved, 16384K cma-reserved, 1294332K highmem) Jun 30 03:39:15.304591 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 03:39:15.304591 [ 0.000000] ftrace: allocating 39582 entries in 117 pages Jun 30 03:39:15.316647 [ 0.000000] ftrace: allocated 116 pages with 4 groups Jun 30 03:39:15.316647 [ 0.000000] trace event string verifier disabled Jun 30 03:39:15.316647 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 03:39:15.328747 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Jun 30 03:39:15.328747 [ 0.000000] Rude variant of Tasks RCU enabled. Jun 30 03:39:15.340698 [ 0.000000] Tracing variant of Tasks RCU enabled. Jun 30 03:39:15.340698 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Jun 30 03:39:15.352588 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 03:39:15.352588 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 03:39:15.364589 [ 0.000000] GIC: Using split EOI/Deactivate mode Jun 30 03:39:15.364589 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 03:39:15.376795 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 03:39:15.376863 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Jun 30 03:39:15.388743 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Jun 30 03:39:15.400593 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Jun 30 03:39:15.400593 [ 0.000019] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Jun 30 03:39:15.412582 [ 0.002631] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Jun 30 03:39:15.412582 [ 0.002645] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 03:39:15.424613 [ 0.002660] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 03:39:15.436585 [ 0.002672] Ignoring duplicate/late registration of read_current_timer delay Jun 30 03:39:15.436585 [ 0.003040] Console: colour dummy device 80x30 Jun 30 03:39:15.448584 [ 0.003080] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Jun 30 03:39:15.460705 [ 0.003094] CPU: Testing write buffer coherency: ok Jun 30 03:39:15.460736 [ 0.003136] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 03:39:15.472595 [ 0.003143] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 03:39:15.472595 [ 0.003149] pid_max: default: 32768 minimum: 301 Jun 30 03:39:15.484737 [ 0.003505] LSM: Security Framework initializing Jun 30 03:39:15.484737 [ 0.003577] landlock: Up and running. Jun 30 03:39:15.484737 [ 0.003581] Yama: disabled by default; enable with sysctl kernel.yama.* Jun 30 03:39:15.496773 [ 0.003769] AppArmor: AppArmor initialized Jun 30 03:39:15.496838 [ 0.003781] TOMOYO Linux initialized Jun 30 03:39:15.508544 [ 0.003823] LSM support for eBPF active Jun 30 03:39:15.508544 [ 0.004063] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 03:39:15.520557 [ 0.004077] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 03:39:15.520557 [ 0.005512] /cpus/cpu@0 missing clock-frequency property Jun 30 03:39:15.532588 [ 0.005539] /cpus/cpu@1 missing clock-frequency property Jun 30 03:39:15.532588 [ 0.005553] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 03:39:15.544587 [ 0.006503] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 03:39:15.544587 [ 0.006509] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 03:39:15.556720 [ 0.006614] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 03:39:15.556795 [ 0.006619] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 03:39:15.568593 [ 0.006765] Setting up static identity map for 0x40300000 - 0x403000ac Jun 30 03:39:15.568593 [ 0.007930] rcu: Hierarchical SRCU implementation. Jun 30 03:39:15.580709 [ 0.007936] rcu: Max phase no-delay instances is 1000. Jun 30 03:39:15.580777 [ 0.010076] EFI services will not be available. Jun 30 03:39:15.592589 [ 0.010421] smp: Bringing up secondary CPUs ... Jun 30 03:39:15.592589 [ 0.011164] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 03:39:15.592589 [ 0.011175] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 03:39:15.604585 [ 0.011305] smp: Brought up 1 node, 2 CPUs Jun 30 03:39:15.616598 [ 0.011313] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 03:39:15.616598 [ 0.011321] CPU: All CPU(s) started in HYP mode. Jun 30 03:39:15.616598 [ 0.011325] CPU: Virtualization extensions available. Jun 30 03:39:15.628603 [ 0.011953] devtmpfs: initialized Jun 30 03:39:15.628603 [ 0.023064] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 03:39:15.640588 [ 0.023315] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Jun 30 03:39:15.652585 [ 0.023340] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 03:39:15.652585 [ 0.023828] pinctrl core: initialized pinctrl subsystem Jun 30 03:39:15.664586 [ 0.024564] DMI not present or invalid. Jun 30 03:39:15.664586 [ 0.025247] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 03:39:15.664586 [ 0.030601] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 03:39:15.676592 [ 0.032169] audit: initializing netlink subsys (disabled) Jun 30 03:39:15.676592 [ 0.032371] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 Jun 30 03:39:15.688590 [ 0.033545] thermal_sys: Registered thermal governor 'fair_share' Jun 30 03:39:15.700587 [ 0.033552] thermal_sys: Registered thermal governor 'bang_bang' Jun 30 03:39:15.700587 [ 0.033557] thermal_sys: Registered thermal governor 'step_wise' Jun 30 03:39:15.712595 [ 0.033561] thermal_sys: Registered thermal governor 'user_space' Jun 30 03:39:15.712595 [ 0.033566] thermal_sys: Registered thermal governor 'power_allocator' Jun 30 03:39:15.724592 [ 0.033934] No ATAGs? Jun 30 03:39:15.724592 [ 0.034002] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jun 30 03:39:15.724592 [ 0.034011] hw-breakpoint: maximum watchpoint size is 8 bytes. Jun 30 03:39:15.736584 [ 0.035102] Serial: AMBA PL011 UART driver Jun 30 03:39:15.736584 [ 0.091370] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Jun 30 03:39:15.748586 [ 0.102437] iommu: Default domain type: Translated Jun 30 03:39:15.748586 [ 0.102444] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 03:39:15.760615 [ 0.103421] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Jun 30 03:39:15.760615 [ 0.103972] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 03:39:15.772571 [ 0.103983] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 03:39:15.772571 [ 0.104634] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 03:39:15.784504 [ 0.104665] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 03:39:15.796646 [ 0.104847] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 03:39:15.796646 [ 0.105202] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 03:39:15.808502 [ 0.105212] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 03:39:15.808502 [ 0.105604] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 03:39:15.820583 [ 0.105892] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 03:39:15.820583 [ 0.105901] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 03:39:15.820583 [ 0.106178] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 03:39:15.832502 [ 0.106278] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 03:39:15.832502 [ 0.106288] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 03:39:15.844645 [ 0.106485] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 03:39:15.844696 [ 0.106684] pps_core: LinuxPPS API ver. 1 registered Jun 30 03:39:15.856631 [ 0.106688] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 03:39:15.856672 [ 0.106704] PTP clock support registered Jun 30 03:39:15.868729 [ 0.108191] NetLabel: Initializing Jun 30 03:39:15.868787 [ 0.108197] NetLabel: domain hash size = 128 Jun 30 03:39:15.868834 [ 0.108202] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Jun 30 03:39:15.880703 [ 0.108274] NetLabel: unlabeled traffic allowed by default Jun 30 03:39:15.880765 [ 0.108437] vgaarb: loaded Jun 30 03:39:15.892699 [ 0.109122] clocksource: Switched to clocksource mct-frc Jun 30 03:39:15.892749 [ 0.177936] VFS: Disk quotas dquot_6.6.0 Jun 30 03:39:15.892793 [ 0.178028] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jun 30 03:39:15.904708 [ 0.178767] AppArmor: AppArmor Filesystem Enabled Jun 30 03:39:15.904769 [ 0.187836] NET: Registered PF_INET protocol family Jun 30 03:39:15.916711 [ 0.188045] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Jun 30 03:39:15.916781 [ 0.189683] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 03:39:15.928726 [ 0.189773] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 03:39:15.940712 [ 0.189797] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Jun 30 03:39:15.940782 [ 0.189891] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Jun 30 03:39:15.952707 [ 0.190120] TCP: Hash tables configured (established 8192 bind 8192) Jun 30 03:39:15.952769 [ 0.190343] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Jun 30 03:39:15.964726 [ 0.190428] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 03:39:15.976662 [ 0.190468] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 03:39:15.976730 [ 0.190667] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 03:39:15.988692 [ 0.190700] NET: Registered PF_XDP protocol family Jun 30 03:39:15.988754 [ 0.190711] PCI: CLS 0 bytes, default 64 Jun 30 03:39:15.988802 [ 0.191225] Trying to unpack rootfs image as initramfs... Jun 30 03:39:16.000721 [ 0.191642] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Jun 30 03:39:16.000792 [ 0.191848] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Jun 30 03:39:16.012749 [ 0.193477] Initialise system trusted keyrings Jun 30 03:39:16.012810 [ 0.193563] Key type blacklist registered Jun 30 03:39:16.024701 [ 0.193789] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Jun 30 03:39:16.024765 [ 0.200952] zbud: loaded Jun 30 03:39:16.036718 [ 0.202020] integrity: Platform Keyring initialized Jun 30 03:39:16.036780 [ 0.202059] integrity: Machine keyring initialized Jun 30 03:39:16.036827 [ 0.202067] Key type asymmetric registered Jun 30 03:39:16.048718 [ 0.202074] Asymmetric key parser 'x509' registered Jun 30 03:39:16.048780 [ 1.562769] Freeing initrd memory: 25696K Jun 30 03:39:16.048826 [ 1.574619] alg: self-tests for CTR-KDF (hmac(sha256)) passed Jun 30 03:39:16.060700 [ 1.574907] bounce: pool size: 64 pages Jun 30 03:39:16.060759 [ 1.575071] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Jun 30 03:39:16.072714 [ 1.575236] io scheduler mq-deadline registered Jun 30 03:39:16.072773 [ 1.580395] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Jun 30 03:39:16.084726 [ 1.601319] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 03:39:16.096625 [ 1.601331] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 03:39:16.096666 [ 1.603625] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 03:39:16.108560 [ 1.603635] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 03:39:16.120606 [ 1.604421] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 03:39:16.120651 [ 1.604430] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 03:39:16.132601 [ 1.605295] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 03:39:16.144689 [ 1.605304] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 03:39:16.144762 [ 1.607633] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 03:39:16.156577 [ 1.610462] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 03:39:16.168569 [ 1.613221] Serial: AMBA driver Jun 30 03:39:16.168569 [ 1.613476] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 03:39:16.180611 [ 1.613955] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 03:39:16.192570 [ 1.614423] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 03:39:16.192570 [ 2.745314] printk: console [ttySAC2] enabled Jun 30 03:39:16.204604 [ 2.750130] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Jun 30 03:39:16.204604 [ 2.760775] STM32 USART driver initialized Jun 30 03:39:16.216640 [ 2.774950] mousedev: PS/2 mouse device common for all mice Jun 30 03:39:16.228527 [ 2.813284] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 03:39:16.264476 [ 2.821893] s5m-rtc s5m-rtc: setting system clock to 2000-01-02T00:00:31 UTC (946771231) Jun 30 03:39:16.276593 [ 2.831685] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Jun 30 03:39:16.288673 [ 2.839146] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 03:39:16.288758 [ 2.847120] NET: Registered PF_INET6 protocol family Jun 30 03:39:16.300557 [ 2.860861] Segment Routing with IPv6 Jun 30 03:39:16.312590 [ 2.863128] In-situ OAM (IOAM) with IPv6 Jun 30 03:39:16.312590 [ 2.867053] mip6: Mobile IPv6 Jun 30 03:39:16.324594 [ 2.869936] NET: Registered PF_PACKET protocol family Jun 30 03:39:16.324594 [ 2.875083] mpls_gso: MPLS GSO support Jun 30 03:39:16.324594 [ 2.879300] ThumbEE CPU extension supported. Jun 30 03:39:16.336612 [ 2.882966] Registering SWP/SWPB emulation handler Jun 30 03:39:16.336612 [ 2.888197] registered taskstats version 1 Jun 30 03:39:16.336612 [ 2.891828] Loading compiled-in X.509 certificates Jun 30 03:39:16.348574 [ 3.348247] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Jun 30 03:39:16.804614 [ 3.355585] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Jun 30 03:39:16.816599 [ 3.366604] zswap: loaded using pool lzo/zbud Jun 30 03:39:16.816599 [ 3.370620] Key type .fscrypt registered Jun 30 03:39:16.832597 [ 3.373919] Key type fscrypt-provisioning registered Jun 30 03:39:16.832597 [ 3.387777] Key type encrypted registered Jun 30 03:39:16.843999 [ 3.390374] AppArmor: AppArmor sha1 policy hashing enabled Jun 30 03:39:16.844074 [ 3.395833] ima: No TPM chip found, activating TPM-bypass! Jun 30 03:39:16.856615 [ 3.401296] ima: Allocated hash algorithm: sha256 Jun 30 03:39:16.856615 [ 3.406015] ima: No architecture policies found Jun 30 03:39:16.856615 [ 3.410529] evm: Initialising EVM extended attributes: Jun 30 03:39:16.868606 [ 3.415601] evm: security.selinux Jun 30 03:39:16.868606 [ 3.418890] evm: security.SMACK64 (disabled) Jun 30 03:39:16.868606 [ 3.423140] evm: security.SMACK64EXEC (disabled) Jun 30 03:39:16.880611 [ 3.427741] evm: security.SMACK64TRANSMUTE (disabled) Jun 30 03:39:16.880611 [ 3.432775] evm: security.SMACK64MMAP (disabled) Jun 30 03:39:16.892610 [ 3.437375] evm: security.apparmor Jun 30 03:39:16.892610 [ 3.440746] evm: security.ima Jun 30 03:39:16.892610 [ 3.443711] evm: security.capability Jun 30 03:39:16.892610 [ 3.447276] evm: HMAC attrs: 0x1 Jun 30 03:39:16.904548 [ 4.030861] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 03:39:17.484570 [ 4.057231] Freeing unused kernel image (initmem) memory: 2048K Jun 30 03:39:17.508586 [ 4.062102] Checked W+X mappings: passed, no W+X pages found Jun 30 03:39:17.520707 [ 4.067358] Run /init as init process Jun 30 03:39:17.520773 [ 4.643075] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 03:39:18.100668 [ 4.688375] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 03:39:18.148568 [ 4.695529] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 03:39:18.148568 [ 4.711384] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 03:39:18.172516 [ 4.725486] usbcore: registered new interface driver usbfs Jun 30 03:39:18.184513 [ 4.730507] usbcore: registered new interface driver hub Jun 30 03:39:18.184776 [ 4.744237] usbcore: registered new device driver usb Jun 30 03:39:18.196479 [ 4.755475] phy phy-12130000.phy.3: phy_power_on was called before phy_init Jun 30 03:39:18.208578 [ 4.761014] exynos-ohci 12120000.usb: USB Host Controller Jun 30 03:39:18.220523 [ 4.766694] phy phy-12130000.phy.3: phy_power_on was called before phy_init Jun 30 03:39:18.220523 [ 4.778599] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 03:39:18.232603 [ 4.782674] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Jun 30 03:39:18.244533 [ 4.790298] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Jun 30 03:39:18.244533 [ 4.805410] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Jun 30 03:39:18.256532 [ 4.817308] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Jun 30 03:39:18.268503 [ 4.825821] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 03:39:18.278820 [ 4.845194] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 03:39:18.304522 [ 4.855473] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 03:39:18.316558 [ 4.862360] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 03:39:18.316558 [ 4.869505] usb usb1: Product: EHCI Host Controller Jun 30 03:39:18.328545 [ 4.874357] usb usb1: Manufacturer: Linux 6.1.0-18-armmp ehci_hcd Jun 30 03:39:18.328545 [ 4.880428] usb usb1: SerialNumber: 12110000.usb Jun 30 03:39:18.340515 [ 4.898476] VDD_ALIVE_1.0V: Bringing 1000000uV into 1100000-1100000uV Jun 30 03:39:18.356674 [ 4.911097] hub 1-0:1.0: USB hub found Jun 30 03:39:18.368534 [ 4.930966] hub 1-0:1.0: 3 ports detected Jun 30 03:39:18.380543 [ 4.939903] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Jun 30 03:39:18.392762 [ 4.946764] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 03:39:18.404734 [ 4.953937] usb usb2: Product: USB Host Controller Jun 30 03:39:18.404794 [ 4.957178] usb3503 usb-hub: switched to HUB mode Jun 30 03:39:18.416676 [ 4.958708] usb usb2: Manufacturer: Linux 6.1.0-18-armmp ohci_hcd Jun 30 03:39:18.416741 [ 4.963394] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 03:39:18.425750 [ 4.969465] usb usb2: SerialNumber: 12120000.usb Jun 30 03:39:18.425811 [ 5.070410] hub 2-0:1.0: USB hub found Jun 30 03:39:18.521745 [ 5.075039] hub 2-0:1.0: 3 ports detected Jun 30 03:39:18.533723 [ 5.284924] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 03:39:18.737656 [ 5.285196] usb 1-3: new high-speed USB device number 2 using exynos-ehci Jun 30 03:39:18.749727 [ 5.289004] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 03:39:18.749794 [ 5.307374] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 Jun 30 03:39:18.761729 [ 5.315383] xhci-hcd xhci-hcd.2.auto: irq 108, io mem 0x12000000 Jun 30 03:39:18.773803 [ 5.321520] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 03:39:18.773837 [ 5.326787] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 03:39:18.785847 [ 5.334431] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 03:39:18.785911 [ 5.341080] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 03:39:18.797782 [ 5.349179] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 03:39:18.809719 [ 5.356376] usb usb3: Product: xHCI Host Controller Jun 30 03:39:18.809776 [ 5.361241] usb usb3: Manufacturer: Linux 6.1.0-18-armmp xhci-hcd Jun 30 03:39:18.821741 [ 5.367310] usb usb3: SerialNumber: xhci-hcd.2.auto Jun 30 03:39:18.821803 [ 5.372934] hub 3-0:1.0: USB hub found Jun 30 03:39:18.821853 [ 5.375937] hub 3-0:1.0: 1 port detected Jun 30 03:39:18.833746 [ 5.380335] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 03:39:18.833837 [ 5.388011] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Jun 30 03:39:18.845726 [ 5.396137] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 03:39:18.857707 [ 5.403342] usb usb4: Product: xHCI Host Controller Jun 30 03:39:18.857761 [ 5.408195] usb usb4: Manufacturer: Linux 6.1.0-18-armmp xhci-hcd Jun 30 03:39:18.869786 [ 5.414270] usb usb4: SerialNumber: xhci-hcd.2.auto Jun 30 03:39:18.869840 [ 5.419802] hub 4-0:1.0: USB hub found Jun 30 03:39:18.869885 [ 5.422897] hub 4-0:1.0: 1 port detected Jun 30 03:39:18.881665 [ 5.461551] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Jun 30 03:39:18.917707 [ 5.468298] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jun 30 03:39:18.929657 [ 5.476845] hub 1-3:1.0: USB hub found Jun 30 03:39:18.929686 [ 5.479306] hub 1-3:1.0: 3 ports detected Jun 30 03:39:18.929711 Starting system log daemon: syslogd, klogd. Jun 30 03:39:19.073623 /var/run/utmp: No such file or directory Jun 30 03:39:20.921703 [?1h=(B   Jun 30 03:39:20.969793  Jun 30 03:39:20.981796 [  (-*) ][ Jan 02  0:00 ] Jun 30 03:39:20.993745 [  (0*start) ][ Jan 02  0:00 ] Jun 30 03:39:21.005707 [  (0*start) ][ Jan 02  0:00 ] Jun 30 03:39:21.017750 [  (0*start) ][ Jan 02  0:00 ] Jun 30 03:39:21.029760 [  (0*start) ][ Jan 02  0:00 ]                        [  (0*start) ][ Jan 02  0:00 ][  (0*start) ][ Jan 02  0:00 ] Jun 30 03:39:21.089714 [ 0- start  (2*shell) ][ Jan 02  0:00 ] Jun 30 03:39:21.101731 [ 0- start  (2*shell) ][ Jan 02  0:00 ] Jun 30 03:39:21.113762 [ 0- start  (2*shell) ][ Jan 02  0:00 ] Jun 30 03:39:21.125785 [ 0- start  (2*shell) ][ Jan 02  0:00 ]                        [ 0- start  (2*shell) ][ Jan 02  0:00 ][ 0- start  (2*shell) ][ Jan 02  0:00 ] Jun 30 03:39:21.185767 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:00 ] Jun 30 03:39:21.197772 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:00 ] Jun 30 03:39:21.209773 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:00 ] Jun 30 03:39:21.221796 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:00 ]                        [ 0 start 2- shell  (3*shell) ][ Jan 02  0:00 ][ 0 start 2- shell  (3*shell) ][ Jan 02  0:00 ] Jun 30 03:39:21.281774 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:00 ] Jun 30 03:39:21.293657 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:00 ] Jun 30 03:39:21.305773 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:00 ] Jun 30 03:39:21.317795 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:00 ]                        [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:00 ][ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:00 ] Jun 30 03:39:21.380646 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Jun 30 03:39:21.392643 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Jun 30 03:39:21.404543 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Jun 30 03:39:21.416542 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:00 ]                        [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:00 ][ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Jun 30 03:39:21.473774 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Jun 30 03:39:21.485820 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Jun 30 03:39:21.497781 [  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Jun 30 03:39:21.965751 Detecting network hardware ... 2%... 95%... 100% Jun 30 03:39:23.717752 Detecting link on eth0; please wait... ... 0%... 10%... 20% Jun 30 03:39:28.625770 Waiting for link-local address... ... 8%... 16%... 25%... 33%... 41%... 100% Jun 30 03:39:29.909736 Attempting IPv6 autoconfiguration... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 75%... 83%... 91%... 100% Jun 30 03:39:35.985646 Configuring the network with DHCP ... 0%... 100% Jun 30 03:39:39.144694 [  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:01 ] Checking the Debian archive mirror ... 25%... 50%... 75%... 100% Jun 30 03:39:47.272765 Loading additional components ... 0%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Jun 30 03:40:21.348528 Setting up the clock ... 0%... 3%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  3:40 ]... 100% Jun 30 03:40:24.176724 Loading additional components ... 50%... 100% Jun 30 03:40:25.869714 Detecting disks and all other hardware ... 2%... 95%... 100% Jun 30 03:40:30.249696 Loading additional components ... 5%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Jun 30 03:40:39.053706 Loading additional components ... 25%... 50%... 75%... 100% Jun 30 03:40:41.461879 Starting up the partitioner ... 4%... 13%... 21%... 30%... 43%... 52%... 60%... 73%... 82%... 91%... 100% Jun 30 03:40:55.369691 [  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  3:41 ] Guided partitioning ... 16%... 33%... 50%... 66%... 83%... 100% Jun 30 03:41:03.841795 Starting up the partitioner ... 4%... 12%... 20%... 32%... 40%... 52%... 60%... 72%... 80%... 92%... 100% Jun 30 03:41:13.817743 Partitions formatting ... 33% Jun 30 03:41:22.253704 Partitions formatting Jun 30 03:41:31.716653 Partitions formatting Installing the base system ... 0%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  3:42 ]... 17%... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  3:43 ]... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  3:44 ]... 48%... 50%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  3:45 ]...  Jun 30 03:45:22.701552  60%... 70%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  3:46 ]... 79%... 83%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  3:47 ][  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  3:48 ]... 91%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  3:49 ]... 100% Jun 30 03:49:50.485725 Configuring apt ... 7%... 14%... 14%... 21%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  3:50 ]... 35%... 42%... 50%... 60%... 70%. Jun 30 03:50:28.121731 ... 82%... 92%... 100% Jun 30 03:50:30.788561 Select and install software ... 1%... 10%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  3:51 ]... 13%... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  3:52 ]... 40%... 50%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  3:53 ]... Jun 30 03:53:21.501701 . 60%... 70%... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  3:54 ]... 88%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  3:55 ]... 90%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  3:56 ]... 94%... 100% Jun 30 03:56:30.641678 Finishing the installation ... 4%... 12%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  3:57 ][  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  3:58 ]... 16%... 20%... 32%... 40%... 44%... Jun 30 03:58:16.960522  52%... 60%... 72%... 80%... 92% The system is going down NOW! Sent SIGKILL to all processes Jun 30 03:58:28.657804 Requesting system reboot Jun 30 03:58:28.669679 [ 1156.247868] reboot: Reó Jun 30 03:58:30.025620 Jun 30 03:58:30.025620 Jun 30 03:58:30.025620 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 03:58:30.025620 Jun 30 03:58:30.025620 CPU: Exynos5250@1000MHz Jun 30 03:58:30.025620 Jun 30 03:58:30.025620 Board: Arndale Jun 30 03:58:30.037639 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 03:58:30.037639 ready Jun 30 03:58:30.037639 DRAM: 2 GiB Jun 30 03:58:30.037639 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 03:58:30.061610 trace: enabled Jun 30 03:58:30.097604 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 03:58:30.457601 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 03:58:30.505589 In: serial Jun 30 03:58:30.517640 Out: serial Jun 30 03:58:30.517640 Err: serial Jun 30 03:58:30.517640 SCSI: ARNDALE SCSI INIT Jun 30 03:58:30.517640 Target spinup took 0 ms. Jun 30 03:58:30.517640 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 03:58:30.529665 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 03:58:30.529665 Net: Net Initialization Skipped Jun 30 03:58:30.541634 No ethernet found. Jun 30 03:58:30.541634 Hostname: arndale-metrocentre Jun 30 03:58:30.541634 Hit any key to stop autoboot: 2  1  0 Jun 30 03:58:32.464764 (Re)start USB... Jun 30 03:58:32.464852 USB0: USB EHCI 1.00 Jun 30 03:58:32.464897 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 03:58:38.069809 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 03:58:38.069894 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 03:58:38.513734 Waiting for Ethernet connection... done. Jun 30 03:58:40.169752 BOOTP broadcast 1 Jun 30 03:58:40.169832 BOOTP broadcast 2 Jun 30 03:58:41.681670 DHCP client bound to address 10.149.64.44 (1587 ms) Jun 30 03:58:41.693761 Using asx0 device Jun 30 03:58:41.693823 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 03:58:41.693850 Filename 'pxelinux.0'. Jun 30 03:58:41.705677 Load address: 0x43e00000 Jun 30 03:58:41.705733 Loading: *### Jun 30 03:58:41.717675 2.1 MiB/s Jun 30 03:58:41.717730 done Jun 30 03:58:41.729748 Bytes transferred = 42430 (a5be hex) Jun 30 03:58:41.729808 missing environment variable: pxeuuid Jun 30 03:58:41.729853 Retrieving file: pxelinux.cfg/0A95402C Jun 30 03:58:41.729898 Using asx0 device Jun 30 03:58:41.741761 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 03:58:41.741825 Filename 'pxelinux.cfg/0A95402C'. Jun 30 03:58:41.741871 Load address: 0x51000000 Jun 30 03:58:41.741913 Loading: *# Jun 30 03:58:41.753736 31.3 KiB/s Jun 30 03:58:41.753793 done Jun 30 03:58:41.753834 Bytes transferred = 65 (41 hex) Jun 30 03:58:41.753878 Config file found Jun 30 03:58:41.753919 Ignoring unknown command: serial Jun 30 03:58:41.753962 1: local Jun 30 03:58:41.754001 scanning bus for devices... Jun 30 03:58:41.765696 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 03:58:41.789769 Type: Hard Disk Jun 30 03:58:41.789827 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 03:58:41.801759 Found 1 device(s). Jun 30 03:58:41.801815 Jun 30 03:58:41.801854 SCSI device 0: Jun 30 03:58:41.801894 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 03:58:41.813766 Type: Hard Disk Jun 30 03:58:41.813823 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 03:58:41.813873 ... is now current device Jun 30 03:58:41.825680 Scanning scsi 0... Jun 30 03:58:41.825736 Found U-Boot script /boot.scr Jun 30 03:58:41.933741 641 bytes read in 36 ms (16.6 KiB/s) Jun 30 03:58:41.981765 ## Executing script at 50000000 Jun 30 03:58:41.981822 Loading dtbs/exynos5250-arndale.dtb Jun 30 03:58:41.981867 46686 bytes read in 750 ms (60.5 KiB/s) Jun 30 03:58:42.725686 Loading vmlinuz-6.1.0-22-armmp-lpae Jun 30 03:58:42.725790 5505536 bytes read in 188 ms (27.9 MiB/s) Jun 30 03:58:42.929749 Loading initrd.img-6.1.0-22-armmp-lpae Jun 30 03:58:42.929809 25720898 bytes read in 2475 ms (9.9 MiB/s) Jun 30 03:58:45.332850 Booting Jun 30 03:58:45.332926 Kernel image @ 0x42000000 [ 0x000000 - 0x540200 ] Jun 30 03:58:45.332988 ## Flattened Device Tree blob at 43000000 Jun 30 03:58:45.344789 Booting using the fdt blob at 0x43000000 Jun 30 03:58:45.344848 Loading Ramdisk to 4e778000, end 4ffff842 ... OK Jun 30 03:58:45.756779 Loading Device Tree to 4e769000, end 4e77765d ... OK Jun 30 03:58:45.768740 Jun 30 03:58:45.768792 Starting kernel ...(fake run for tracing) Jun 30 03:58:45.768838 Jun 30 03:58:45.768874 Jun 30 03:58:45.780634 Starting kernel ... Jun 30 03:58:45.780665 Jun 30 03:58:45.780685 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 03:58:51.924586 [ 0.000000] Linux version 6.1.0-22-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.94-1 (2024-06-21) Jun 30 03:58:51.936680 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=30c5387d Jun 30 03:58:51.948724 [ 0.000000] CPU: div instructions available: patching division code Jun 30 03:58:51.948797 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 03:58:51.960743 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 03:58:51.960812 [ 0.000000] Memory policy: Data cache writealloc Jun 30 03:58:51.972739 [ 0.000000] efi: UEFI not found. Jun 30 03:58:51.972796 [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000 Jun 30 03:58:51.972843 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 03:58:51.984729 [ 0.000000] Zone ranges: Jun 30 03:58:51.984784 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Jun 30 03:58:51.984833 [ 0.000000] Normal empty Jun 30 03:58:51.999442 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Jun 30 03:58:51.999504 [ 0.000000] Movable zone start for each node Jun 30 03:58:51.999550 [ 0.000000] Early memory node ranges Jun 30 03:58:52.012594 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 03:58:52.012594 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 03:58:52.024684 [ 0.000000] percpu: Embedded 18 pages/cpu s44756 r8192 d20780 u73728 Jun 30 03:58:52.024751 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Jun 30 03:58:52.036553 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=ttySAC2,115200n8 Jun 30 03:58:52.048658 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Jun 30 03:58:52.048687 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 03:58:52.060713 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Jun 30 03:58:52.060776 [ 0.000000] Memory: 2015520K/2097152K available (12288K kernel code, 1714K rwdata, 3748K rodata, 2048K init, 382K bss, 65248K reserved, 16384K cma-reserved, 1294332K highmem) Jun 30 03:58:52.084580 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 03:58:52.084580 [ 0.000000] ftrace: allocating 39982 entries in 118 pages Jun 30 03:58:52.096600 [ 0.000000] ftrace: allocated 118 pages with 5 groups Jun 30 03:58:52.096660 [ 0.000000] trace event string verifier disabled Jun 30 03:58:52.108627 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 03:58:52.108647 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Jun 30 03:58:52.120589 [ 0.000000] Rude variant of Tasks RCU enabled. Jun 30 03:58:52.120589 [ 0.000000] Tracing variant of Tasks RCU enabled. Jun 30 03:58:52.120589 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Jun 30 03:58:52.132585 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 03:58:52.132585 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 03:58:52.144631 [ 0.000000] GIC: Using split EOI/Deactivate mode Jun 30 03:58:52.144631 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 03:58:52.156696 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 03:58:52.156762 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Jun 30 03:58:52.166260 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Jun 30 03:58:52.180612 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Jun 30 03:58:52.180612 [ 0.000019] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Jun 30 03:58:52.192588 [ 0.002639] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Jun 30 03:58:52.192588 [ 0.002653] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 03:58:52.204590 [ 0.002668] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 03:58:52.216590 [ 0.002679] Ignoring duplicate/late registration of read_current_timer delay Jun 30 03:58:52.228586 [ 0.003043] Console: colour dummy device 80x30 Jun 30 03:58:52.228586 [ 0.003083] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Jun 30 03:58:52.240707 [ 0.003095] CPU: Testing write buffer coherency: ok Jun 30 03:58:52.240767 [ 0.003137] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 03:58:52.252721 [ 0.003145] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 03:58:52.266657 [ 0.003152] pid_max: default: 32768 minimum: 301 Jun 30 03:58:52.266718 [ 0.003507] LSM: Security Framework initializing Jun 30 03:58:52.266767 [ 0.003577] landlock: Up and running. Jun 30 03:58:52.276643 [ 0.003582] Yama: disabled by default; enable with sysctl kernel.yama.* Jun 30 03:58:52.276707 [ 0.003767] AppArmor: AppArmor initialized Jun 30 03:58:52.276753 [ 0.003780] TOMOYO Linux initialized Jun 30 03:58:52.288601 [ 0.003824] LSM support for eBPF active Jun 30 03:58:52.288658 [ 0.004068] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 03:58:52.298285 [ 0.004082] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 03:58:52.300612 [ 0.005477] /cpus/cpu@0 missing clock-frequency property Jun 30 03:58:52.311439 [ 0.005505] /cpus/cpu@1 missing clock-frequency property Jun 30 03:58:52.311439 [ 0.005518] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 03:58:52.324567 [ 0.006459] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 03:58:52.324639 [ 0.006465] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 03:58:52.333676 [ 0.006565] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 03:58:52.333717 [ 0.006570] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 03:58:52.346937 [ 0.006710] Setting up static identity map for 0x40400000 - 0x404000ac Jun 30 03:58:52.346937 [ 0.007874] rcu: Hierarchical SRCU implementation. Jun 30 03:58:52.358987 [ 0.007879] rcu: Max phase no-delay instances is 1000. Jun 30 03:58:52.358987 [ 0.009999] EFI services will not be available. Jun 30 03:58:52.372041 [ 0.010337] smp: Bringing up secondary CPUs ... Jun 30 03:58:52.372041 [ 0.011066] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 03:58:52.384609 [ 0.011078] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 03:58:52.384687 [ 0.011210] smp: Brought up 1 node, 2 CPUs Jun 30 03:58:52.394919 [ 0.011219] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 03:58:52.394983 [ 0.011226] CPU: All CPU(s) started in HYP mode. Jun 30 03:58:52.408638 [ 0.011230] CPU: Virtualization extensions available. Jun 30 03:58:52.408699 [ 0.012096] devtmpfs: initialized Jun 30 03:58:52.408744 [ 0.022936] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 03:58:52.419703 [ 0.023170] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Jun 30 03:58:52.432658 [ 0.023195] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 03:58:52.432722 [ 0.023744] pinctrl core: initialized pinctrl subsystem Jun 30 03:58:52.444620 [ 0.024500] DMI not present or invalid. Jun 30 03:58:52.444679 [ 0.025173] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 03:58:52.444729 [ 0.026712] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 03:58:52.456587 [ 0.028190] audit: initializing netlink subsys (disabled) Jun 30 03:58:52.468643 [ 0.028394] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 Jun 30 03:58:52.468713 [ 0.029583] thermal_sys: Registered thermal governor 'fair_share' Jun 30 03:58:52.480677 [ 0.029590] thermal_sys: Registered thermal governor 'bang_bang' Jun 30 03:58:52.480747 [ 0.029595] thermal_sys: Registered thermal governor 'step_wise' Jun 30 03:58:52.492569 [ 0.029599] thermal_sys: Registered thermal governor 'user_space' Jun 30 03:58:52.492632 [ 0.029603] thermal_sys: Registered thermal governor 'power_allocator' Jun 30 03:58:52.504647 [ 0.029804] No ATAGs? Jun 30 03:58:52.504702 [ 0.029871] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jun 30 03:58:52.516573 [ 0.029879] hw-breakpoint: maximum watchpoint size is 8 bytes. Jun 30 03:58:52.516637 [ 0.030963] Serial: AMBA PL011 UART driver Jun 30 03:58:52.516684 [ 0.080526] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 30 03:58:52.528580 [ 0.087431] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Jun 30 03:58:52.540647 [ 0.091661] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages Jun 30 03:58:52.540710 [ 0.091670] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page Jun 30 03:58:52.552631 [ 0.098648] iommu: Default domain type: Translated Jun 30 03:58:52.552693 [ 0.098656] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 03:58:52.565894 [ 0.099635] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Jun 30 03:58:52.565894 [ 0.100170] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 03:58:52.575571 [ 0.100182] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 03:58:52.575571 [ 0.100686] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 03:58:52.585643 [ 0.100716] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 03:58:52.600571 [ 0.100922] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 03:58:52.600571 [ 0.101280] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 03:58:52.600571 [ 0.101291] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 03:58:52.612486 [ 0.101685] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 03:58:52.612486 [ 0.101975] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 03:58:52.624545 [ 0.101985] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 03:58:52.624545 [ 0.102277] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 03:58:52.636234 [ 0.102378] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 03:58:52.636234 [ 0.102387] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 03:58:52.648096 [ 0.102569] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 03:58:52.648096 [ 0.102786] pps_core: LinuxPPS API ver. 1 registered Jun 30 03:58:52.648096 [ 0.102791] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 03:58:52.659968 [ 0.102807] PTP clock support registered Jun 30 03:58:52.672131 [ 0.104406] NetLabel: Initializing Jun 30 03:58:52.672131 [ 0.104412] NetLabel: domain hash size = 128 Jun 30 03:58:52.672131 [ 0.104417] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Jun 30 03:58:52.684551 [ 0.104471] NetLabel: unlabeled traffic allowed by default Jun 30 03:58:52.684551 [ 0.104652] vgaarb: loaded Jun 30 03:58:52.684551 [ 0.105658] clocksource: Switched to clocksource mct-frc Jun 30 03:58:52.696156 [ 0.106255] VFS: Disk quotas dquot_6.6.0 Jun 30 03:58:52.696156 [ 0.106339] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jun 30 03:58:52.708566 [ 0.107139] AppArmor: AppArmor Filesystem Enabled Jun 30 03:58:52.708566 [ 0.117087] NET: Registered PF_INET protocol family Jun 30 03:58:52.720481 [ 0.117288] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Jun 30 03:58:52.720481 [ 0.118751] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 03:58:52.731961 [ 0.118853] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 03:58:52.731961 [ 0.118880] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Jun 30 03:58:52.744124 [ 0.118980] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Jun 30 03:58:52.753689 [ 0.119210] TCP: Hash tables configured (established 8192 bind 8192) Jun 30 03:58:52.753689 [ 0.119448] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Jun 30 03:58:52.768490 [ 0.119542] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 03:58:52.768490 [ 0.119583] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 03:58:52.780198 [ 0.119823] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 03:58:52.780198 [ 0.119861] NET: Registered PF_XDP protocol family Jun 30 03:58:52.792498 [ 0.119871] PCI: CLS 0 bytes, default 64 Jun 30 03:58:52.792498 [ 0.120362] Trying to unpack rootfs image as initramfs... Jun 30 03:58:52.804281 [ 0.120725] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Jun 30 03:58:52.804281 [ 0.121987] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Jun 30 03:58:52.815977 [ 0.190629] Initialise system trusted keyrings Jun 30 03:58:52.815977 [ 0.190705] Key type blacklist registered Jun 30 03:58:52.828099 [ 0.191913] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Jun 30 03:58:52.828099 [ 0.199839] zbud: loaded Jun 30 03:58:52.828099 [ 0.201881] integrity: Platform Keyring initialized Jun 30 03:58:52.840252 [ 0.201913] integrity: Machine keyring initialized Jun 30 03:58:52.840252 [ 0.201923] Key type asymmetric registered Jun 30 03:58:52.852603 [ 0.201930] Asymmetric key parser 'x509' registered Jun 30 03:58:52.852605 [ 1.422366] Freeing initrd memory: 25120K Jun 30 03:58:52.852605 [ 1.444489] alg: self-tests for CTR-KDF (hmac(sha256)) passed Jun 30 03:58:52.864558 [ 1.444754] bounce: pool size: 64 pages Jun 30 03:58:52.864558 [ 1.444943] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Jun 30 03:58:52.875982 [ 1.445106] io scheduler mq-deadline registered Jun 30 03:58:52.875982 [ 1.450276] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Jun 30 03:58:52.888039 [ 1.471270] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 03:58:52.888039 [ 1.471282] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 03:58:52.900527 [ 1.473562] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 03:58:52.910571 [ 1.473572] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 03:58:52.922825 [ 1.474417] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 03:58:52.922825 [ 1.474427] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 03:58:52.936300 [ 1.475246] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 03:58:52.948343 [ 1.475254] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 03:58:52.948343 [ 1.477593] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 03:58:52.960241 [ 1.480421] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 03:58:52.972522 [ 1.483180] Serial: AMBA driver Jun 30 03:58:52.972522 [ 1.483402] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 03:58:52.984111 [ 1.483877] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 03:58:52.984111 [ 1.484342] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 03:58:52.996139 [ 2.565158] printk: console [ttySAC2] enabled Jun 30 03:58:52.996139 [ 2.570008] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Jun 30 03:58:53.008484 [ 2.580618] STM32 USART driver initialized Jun 30 03:58:53.020083 [ 2.595025] mousedev: PS/2 mouse device common for all mice Jun 30 03:58:53.032565 [ 2.631749] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 03:58:53.068259 [ 2.640379] s5m-rtc s5m-rtc: setting system clock to 2024-06-30T03:58:54 UTC (1719719934) Jun 30 03:58:53.080393 [ 2.650237] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Jun 30 03:58:53.092429 [ 2.657711] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 03:58:53.092429 [ 2.665715] NET: Registered PF_INET6 protocol family Jun 30 03:58:53.104167 [ 2.689806] Segment Routing with IPv6 Jun 30 03:58:53.128451 [ 2.692048] In-situ OAM (IOAM) with IPv6 Jun 30 03:58:53.128451 [ 2.696064] mip6: Mobile IPv6 Jun 30 03:58:53.128451 [ 2.698915] NET: Registered PF_PACKET protocol family Jun 30 03:58:53.139887 [ 2.704068] mpls_gso: MPLS GSO support Jun 30 03:58:53.139887 [ 2.708089] ThumbEE CPU extension supported. Jun 30 03:58:53.139887 [ 2.711909] Registering SWP/SWPB emulation handler Jun 30 03:58:53.152489 [ 2.717161] registered taskstats version 1 Jun 30 03:58:53.152489 [ 2.720790] Loading compiled-in X.509 certificates Jun 30 03:58:53.152489 [ 3.180167] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Jun 30 03:58:53.620476 [ 3.187555] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Jun 30 03:58:53.632352 [ 3.198625] zswap: loaded using pool lzo/zbud Jun 30 03:58:53.632352 [ 3.202500] Key type .fscrypt registered Jun 30 03:58:53.632352 [ 3.205817] Key type fscrypt-provisioning registered Jun 30 03:58:53.644237 [ 3.229999] Key type encrypted registered Jun 30 03:58:53.667598 [ 3.232542] AppArmor: AppArmor sha1 policy hashing enabled Jun 30 03:58:53.667598 [ 3.238104] ima: No TPM chip found, activating TPM-bypass! Jun 30 03:58:53.680669 [ 3.243492] ima: Allocated hash algorithm: sha256 Jun 30 03:58:53.680752 [ 3.248203] ima: No architecture policies found Jun 30 03:58:53.680802 [ 3.252739] evm: Initialising EVM extended attributes: Jun 30 03:58:53.692608 [ 3.257808] evm: security.selinux Jun 30 03:58:53.692663 [ 3.261090] evm: security.SMACK64 (disabled) Jun 30 03:58:53.692711 [ 3.265363] evm: security.SMACK64EXEC (disabled) Jun 30 03:58:53.704601 [ 3.269958] evm: security.SMACK64TRANSMUTE (disabled) Jun 30 03:58:53.704659 [ 3.274991] evm: security.SMACK64MMAP (disabled) Jun 30 03:58:53.716596 [ 3.279592] evm: security.apparmor Jun 30 03:58:53.716651 [ 3.282977] evm: security.ima Jun 30 03:58:53.716696 [ 3.285928] evm: security.capability Jun 30 03:58:53.716739 [ 3.289474] evm: HMAC attrs: 0x1 Jun 30 03:58:53.728529 [ 3.879242] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 03:58:54.314875 [ 3.885230] clk: Disabling unused clocks Jun 30 03:58:54.328852 [ 3.898142] Freeing unused kernel image (initmem) memory: 2048K Jun 30 03:58:54.340655 [ 3.902983] Checked W+X mappings: passed, no W+X pages found Jun 30 03:58:54.340717 [ 3.908258] Run /init as init process Jun 30 03:58:54.340763 Loading, please wait... Jun 30 03:58:54.375611 Starting systemd-udevd version 252.26-1~deb12u2 Jun 30 03:58:54.448627 [ 4.806765] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 03:58:55.244069 [ 4.833220] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 03:58:55.265860 [ 4.838909] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 03:58:55.277245 [ 4.867445] usbcore: registered new interface driver usbfs Jun 30 03:58:55.301246 [ 4.883155] Synopsys Designware Multimedia Card Interface Driver Jun 30 03:58:55.318152 [ 4.892593] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 30 03:58:55.329742 [ 4.904328] usbcore: registered new interface driver hub Jun 30 03:58:55.341753 [ 4.914075] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 30 03:58:55.353241 [ 4.914637] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 30 03:58:55.353241 [ 4.925950] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 30 03:58:55.365240 [ 4.932640] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 30 03:58:55.365240 [ 4.937767] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 30 03:58:55.377860 [ 4.938132] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo Jun 30 03:58:55.377932 [ 4.943862] usbcore: registered new device driver usb Jun 30 03:58:55.389771 [ 4.953098] mmc_host mmc0: card is polling. Jun 30 03:58:55.389830 [ 4.961995] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo Jun 30 03:58:55.401239 [ 4.977735] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 03:58:55.413252 [ 5.026438] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 03:58:55.465431 [ 5.050672] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 03:58:55.488571 [ 5.079926] phy phy-12130000.phy.2: phy_power_on was called before phy_init Jun 30 03:58:55.512734 [ 5.099635] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 03:58:55.536723 [ 5.104313] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Jun 30 03:58:55.548573 [ 5.118259] exynos-ehci 12110000.usb: irq 109, io mem 0x12110000 Jun 30 03:58:55.560547 [ 5.130522] SCSI subsystem initialized Jun 30 03:58:55.560547 [ 5.136855] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 30 03:58:55.576764 [ 5.149382] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 03:58:55.588728 [ 5.160647] phy phy-12130000.phy.2: phy_power_on was called before phy_init Jun 30 03:58:55.600765 [ 5.166993] mmc0: new DDR MMC card at address 0001 Jun 30 03:58:55.600826 [ 5.179780] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 03:58:55.624792 [ 5.186652] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 03:58:55.624861 [ 5.193803] usb usb1: Product: EHCI Host Controller Jun 30 03:58:55.636788 [ 5.198665] usb usb1: Manufacturer: Linux 6.1.0-22-armmp-lpae ehci_hcd Jun 30 03:58:55.636853 [ 5.205173] usb usb1: SerialNumber: 12110000.usb Jun 30 03:58:55.636899 [ 5.205264] exynos-ohci 12120000.usb: USB Host Controller Jun 30 03:58:55.648763 [ 5.216624] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Jun 30 03:58:55.648823 [ 5.223792] hub 1-0:1.0: USB hub found Jun 30 03:58:55.660757 [ 5.227611] hub 1-0:1.0: 3 ports detected Jun 30 03:58:55.660815 [ 5.232040] mmcblk0: p1 p2 p3 p4 Jun 30 03:58:55.672756 [ 5.233960] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 03:58:55.672859 [ 5.244998] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Jun 30 03:58:55.684839 [ 5.252715] mmc1: new high speed SDHC card at address aaaa Jun 30 03:58:55.684899 [ 5.258310] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Jun 30 03:58:55.696556 [ 5.271595] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Jun 30 03:58:55.708591 [ 5.277621] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 30 03:58:55.720587 [ 5.287281] exynos-ohci 12120000.usb: irq 109, io mem 0x12120000 Jun 30 03:58:55.720587 [ 5.294118] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 30 03:58:55.732749 [ 5.301019] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (241:0) Jun 30 03:58:55.744717 [ 5.311408] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Jun 30 03:58:55.744777 [ 5.329960] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 30 03:58:55.768629 [ 5.354031] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Jun 30 03:58:55.792790 [ 5.359325] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 30 03:58:55.804571 [ 5.360871] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 03:58:55.804571 [ 5.367905] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Jun 30 03:58:55.816609 [ 5.375093] usb usb2: Product: USB Host Controller Jun 30 03:58:55.816609 [ 5.383944] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 30 03:58:55.828602 [ 5.388709] usb usb2: Manufacturer: Linux 6.1.0-22-armmp-lpae ohci_hcd Jun 30 03:58:55.840714 [ 5.404355] usb usb2: SerialNumber: 12120000.usb Jun 30 03:58:55.840736 [ 5.410237] scsi host0: ahci-dwc Jun 30 03:58:55.840736 [ 5.418963] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 110 Jun 30 03:58:55.852763 [ 5.453735] hub 2-0:1.0: USB hub found Jun 30 03:58:55.888550 [ 5.456383] hub 2-0:1.0: 3 ports detected Jun 30 03:58:55.888550 [ 5.779958] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 03:58:56.224566 [ 5.853216] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 03:58:56.296639 [ 5.901726] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 30 03:58:56.344751 [ 5.907301] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 30 03:58:56.344819 [ 5.913145] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 30 03:58:56.356605 [ 5.920601] ata1.00: configured for UDMA/133 Jun 30 03:58:56.356605 [ 5.924339] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 30 03:58:56.368542 [ 5.986946] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 03:58:56.428562 [ 6.003457] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 03:58:56.440605 [ 6.007780] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 03:58:56.452709 [ 6.016214] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Jun 30 03:58:56.452806 [ 6.028257] xhci-hcd xhci-hcd.2.auto: irq 111, io mem 0x12000000 Jun 30 03:58:56.464734 [ 6.033067] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 03:58:56.476671 [ 6.038303] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 03:58:56.476671 [ 6.045948] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 03:58:56.488628 [ 6.052671] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 03:58:56.488628 [ 6.060708] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 03:58:56.500644 [ 6.067896] usb usb3: Product: xHCI Host Controller Jun 30 03:58:56.500644 [ 6.072747] usb usb3: Manufacturer: Linux 6.1.0-22-armmp-lpae xhci-hcd Jun 30 03:58:56.512675 [ 6.079251] usb usb3: SerialNumber: xhci-hcd.2.auto Jun 30 03:58:56.512761 [ 6.086237] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 30 03:58:56.524857 [ 6.086722] hub 3-0:1.0: USB hub found Jun 30 03:58:56.524925 [ 6.092287] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 30 03:58:56.536621 [ 6.092471] sd 0:0:0:0: [sda] Write Protect is off Jun 30 03:58:56.536621 [ 6.096393] hub 3-0:1.0: 1 port detected Jun 30 03:58:56.548636 [ 6.110690] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 03:58:56.548636 [ 6.111182] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 03:58:56.560737 [ 6.119740] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 30 03:58:56.572772 [ 6.127560] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Jun 30 03:58:56.572776 [ 6.136494] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 30 03:58:56.584623 [ 6.144609] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 03:58:56.596638 [ 6.158073] usb usb4: Product: xHCI Host Controller Jun 30 03:58:56.596638 [ 6.162930] usb usb4: Manufacturer: Linux 6.1.0-22-armmp-lpae xhci-hcd Jun 30 03:58:56.596638 [ 6.169432] usb usb4: SerialNumber: xhci-hcd.2.auto Jun 30 03:58:56.612797 [ 6.175874] hub 4-0:1.0: USB hub found Jun 30 03:58:56.612797 [ 6.178209] hub 4-0:1.0: 1 port detected Jun 30 03:58:56.612797 [ 6.185217] sda: sda1 sda2 < sda5 > Jun 30 03:58:56.624769 [ 6.188026] sd 0:0:0:0: [sda] Attached SCSI disk Jun 30 03:58:56.624786 [ 6.219531] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 03:58:56.660587 [ 6.327599] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 03:58:56.768567 [ 6.685059] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 03:58:57.128677 [ 6.755076] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 03:58:57.200532 [ 6.869173] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 03:58:57.308578 [ 6.976779] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 03:58:57.416557 [ 7.084385] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 03:58:57.524557 [ 7.117682] random: crng init done Jun 30 03:58:57.548573 [ 7.191982] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 03:58:57.632605 [ 7.199505] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 03:58:57.644530 [ 7.234794] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. Jun 30 03:58:57.680598 [ 7.245720] device-mapper: uevent: version 1.0.3 Jun 30 03:58:57.680598 [ 7.251572] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Jun 30 03:58:57.692547 Begin: Loading essential drivers ... done. Jun 30 03:58:58.400534 Begin: Running /scripts/init-premount ... done. Jun 30 03:59:01.416224 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 30 03:59:01.420752 Begin: Running /scripts/local-premount ... done. Jun 30 03:59:01.468629 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 30 03:59:01.540687 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 30 03:59:01.648673 /dev/mapper/arndale--metrocentre--vg-root: clean, 39331/1220608 files, 377989/4882432 blocks Jun 30 03:59:01.904756 done. Jun 30 03:59:01.928520 [ 11.615813] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 30 03:59:02.048564 [ 11.859958] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. Jun 30 03:59:02.300580 done. Jun 30 03:59:02.300580 Begin: Running /scripts/local-bottom ... done. Jun 30 03:59:02.352552 Begin: Running /scripts/init-bottom ... done. Jun 30 03:59:02.388528 [ 12.198344] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. Jun 30 03:59:02.640538 INIT: version 3.06 booting Jun 30 03:59:02.964472 INIT: No inittab.d directory found Jun 30 03:59:03.048456 Using makefile-style concurrent boot in runlevel S. Jun 30 03:59:03.376529 Starting hotplug events dispatcher: systemd-udevd. Jun 30 03:59:05.088491 Synthesizing the initial hotplug events (subsystems)...done. Jun 30 03:59:05.328458 Synthesizing the initial hotplug events (devices)...done. Jun 30 03:59:05.892550 Waiting for /dev to be fully populated...[ 15.683684] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 03:59:06.124608 [ 15.712970] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 30 03:59:06.148675 [ 15.780357] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jun 30 03:59:06.220506 [ 15.813022] panfrost 11800000.gpu: clock rate = 533000000 Jun 30 03:59:06.244525 [ 15.961994] panfrost 11800000.gpu: mali-t600 id 0x600 major 0x0 minor 0x0 status 0x1 Jun 30 03:59:06.400591 [ 15.968319] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,31b4dfff Jun 30 03:59:06.412720 [ 15.976493] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 Jun 30 03:59:06.434603 [ 15.988184] panfrost 11800000.gpu: shader_present=0xf l2_present=0x1 Jun 30 03:59:06.434673 [ 16.039241] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 0 Jun 30 03:59:06.476747 [ 16.109706] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 03:59:06.548540 [ 16.143420] usb3503 usb-hub: switched to HUB mode Jun 30 03:59:06.584658 [ 16.146727] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 03:59:06.584754 [ 16.187913] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 03:59:06.632538 [ 16.322543] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 03:59:06.764485 [ 16.436596] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 03:59:06.880614 [ 16.470899] usb 1-3: new high-speed USB device number 2 using exynos-ehci Jun 30 03:59:06.904536 [ 16.544852] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 03:59:06.988526 [ 16.633401] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Jun 30 03:59:07.072543 [ 16.640412] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jun 30 03:59:07.084659 [ 16.653294] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 03:59:07.096553 [ 16.686173] hub 1-3:1.0: USB hub found Jun 30 03:59:07.120473 [ 16.690763] hub 1-3:1.0: 3 ports detected Jun 30 03:59:07.120473 [ 16.752413] OF: graph: no port node found in /soc/hdmi@14530000 Jun 30 03:59:07.192599 [ 16.836626] I/O error, dev mmcblk1, sector 7743713 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 2 Jun 30 03:59:07.276517 [ 16.989895] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Jun 30 03:59:07.424494 [ 17.127350] usb 1-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=77.32 Jun 30 03:59:07.568592 [ 17.134921] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Jun 30 03:59:07.568592 [ 17.141957] usb 1-3.2: Product: USB2.0 Hub Jun 30 03:59:07.580636 [ 17.156118] hub 1-3.2:1.0: USB hub found Jun 30 03:59:07.592680 [ 17.159081] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 03:59:07.604633 [ 17.170746] hub 1-3.2:1.0: 4 ports detected Jun 30 03:59:07.604633 [ 17.231854] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 03:59:07.676533 [ 17.346675] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 03:59:07.784589 [ 17.454569] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 03:59:07.896564 [ 17.469779] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 30 03:59:07.908663 [ 17.562425] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 03:59:08.004547 [ 17.592476] usb 1-3.2.4: New USB device found, idVendor=0b95, idProduct=772a, bcdDevice= 0.01 Jun 30 03:59:08.028652 [ 17.600111] usb 1-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 30 03:59:08.040870 [ 17.607251] usb 1-3.2.4: Product: AX88772 Jun 30 03:59:08.040972 [ 17.611298] usb 1-3.2.4: Manufacturer: ASIX Elec. Corp. Jun 30 03:59:08.052651 [ 17.616725] usb 1-3.2.4: SerialNumber: 000001 Jun 30 03:59:08.052717 [ 17.670698] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 03:59:08.112745 [ 17.678621] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 03:59:08.112821 [ 18.169151] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 30 03:59:08.604571 [ 18.860475] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 03:59:09.300568 [ 18.876112] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Jun 30 03:59:09.312578 [ 18.887934] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, b6:a1:bd:80:b9:d5 Jun 30 03:59:09.324585 [ 18.904055] usbcore: registered new interface driver asix Jun 30 03:59:09.334814 done. Jun 30 03:59:09.672638 [ 19.741061] EXT4-fs (dm-0): re-mounted. Quota mode: none. Jun 30 03:59:10.180479 Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). Jun 30 03:59:10.216619 Checking file systems.../dev/sda1: clean, 922/61056 files, 25374/243968 blocks Jun 30 03:59:11.548766 done. Jun 30 03:59:11.614400 Cleaning up temporary files... /tmp. Jun 30 03:59:11.968567 [ 22.153306] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 30 03:59:12.588665 [ 22.216466] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Jun 30 03:59:12.660581 [ 22.440014] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k FS Jun 30 03:59:12.876854 Mounting local filesystems...done. Jun 30 03:59:13.192798 Activating swapfile swap, if any...done. Jun 30 03:59:13.192886 Cleaning up temporary files.... Jun 30 03:59:13.240738 Starting Setting kernel variables: sysctl. Jun 30 03:59:13.456460 [ 23.583943] audit: type=1400 audit(1719719954.972:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=879 comm="apparmor_parser" Jun 30 03:59:14.032586 [ 23.603560] audit: type=1400 audit(1719719954.976:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=879 comm="apparmor_parser" Jun 30 03:59:14.044603 [ 23.633034] audit: type=1400 audit(1719719955.020:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=878 comm="apparmor_parser" Jun 30 03:59:14.080579 [ 24.010162] audit: type=1400 audit(1719719955.400:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=907 comm="apparmor_parser" Jun 30 03:59:14.449763 [ 24.025890] audit: type=1400 audit(1719719955.400:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=907 comm="apparmor_parser" Jun 30 03:59:14.473751 [ 24.039348] audit: type=1400 audit(1719719955.404:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=907 comm="apparmor_parser" Jun 30 03:59:14.485728 [ 24.199603] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Jun 30 03:59:14.629745 [ 24.323752] audit: type=1400 audit(1719719955.712:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=903 comm="apparmor_parser" Jun 30 03:59:14.773766 [ 24.341721] audit: type=1400 audit(1719719955.716:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=903 comm="apparmor_parser" Jun 30 03:59:14.785700 [ 24.357588] audit: type=1400 audit(1719719955.720:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=903 comm="apparmor_parser" Jun 30 03:59:14.809692 [ 24.375109] audit: type=1400 audit(1719719955.724:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=903 comm="apparmor_parser" Jun 30 03:59:14.821662 Starting: AppArmorLoading AppArmor profiles...done. Jun 30 03:59:14.893717 . Jun 30 03:59:14.893767 [ 26.375141] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 30 03:59:16.805816 [ 26.381213] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jun 30 03:59:16.823321 Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1 Jun 30 03:59:17.969827 Copyright 2004-2022 Internet Systems Consortium. Jun 30 03:59:17.969898 All rights reserved. Jun 30 03:59:17.981753 For info, please visit https://www.isc.org/software/dhcp/ Jun 30 03:59:17.981815 Jun 30 03:59:17.981854 Listening on LPF/eth0/9e:04:00:59:64:5a Jun 30 03:59:17.981899 Sending on LPF/eth0/9e:04:00:59:64:5a Jun 30 03:59:17.993773 Sending on Socket/fallback Jun 30 03:59:17.993830 Created duid "\000\001\000\001.\023\224\223\236\004\000YdZ". Jun 30 03:59:17.993879 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 Jun 30 03:59:18.005731 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 Jun 30 03:59:18.005768 DHCPOFFER of 10.149.64.44 from 10.149.64.4 Jun 30 03:59:18.005794 DHCPREQUEST for 10.149.64.44 on eth0 to 255.255.255.255 port 67 Jun 30 03:59:18.017718 DHCPACK of 10.149.64.44 from 10.149.64.4 Jun 30 03:59:18.017757 bound to 10.149.64.44 -- renewal in 270 seconds. Jun 30 03:59:18.257745 done. Jun 30 03:59:18.269684 Cleaning up temporary files.... Jun 30 03:59:18.317675 Starting nftables: none Jun 30 03:59:18.449707 . Jun 30 03:59:18.857695 INIT: Entering runlevel: 2 Jun 30 03:59:18.929634 Using makefile-style concurrent boot in runlevel 2. Jun 30 03:59:18.977616 Starting Apache httpd web server: apache2[ 29.151948] exynos4-fb 14400000.fimd: deferred probe timeout, ignoring dependency Jun 30 03:59:19.589760 [ 29.161372] exynos-mixer 14450000.mixer: deferred probe timeout, ignoring dependency Jun 30 03:59:19.601752 [ 29.170563] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations Jun 30 03:59:19.601821 [ 29.176930] exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm]) Jun 30 03:59:19.613774 [ 29.185424] exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm]) Jun 30 03:59:19.625712 [ 29.204721] exynos-drm exynos-drm: bound 14500000.dsi (ops hdmi_enable [exynosdrm]) Jun 30 03:59:19.637742 [ 29.218595] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm]) Jun 30 03:59:19.649624 [ 29.233252] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Jun 30 03:59:19.673775 [ 29.238663] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Jun 30 03:59:19.673840 [ 29.246522] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 Jun 30 03:59:19.685695 . Jun 30 03:59:21.041793 Starting NTP server: ntpd2024-06-30T03:59:22 ntpd[1135]: INIT: ntpd ntpsec-1.2.2: Starting Jun 30 03:59:21.485831 2024-06-30T03:59:22 ntpd[1135]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 30 03:59:21.485934 . Jun 30 03:59:21.497680 Starting periodic command scheduler: cron. Jun 30 03:59:21.521681 Starting system message bus: dbus. Jun 30 03:59:21.725641 Starting OpenBSD Secure Shell server: sshd. Jun 30 03:59:22.532500 Jun 30 03:59:23.604547 Debian GNU/Linux 12 arndale-metrocentre ttySAC2 Jun 30 03:59:23.604560 Jun 30 03:59:23.604560 arndale-metrocentre login: INIT: Switching to r INIT: No initUsing makefile-style concurrent boot in runlevel 6. Jun 30 04:04:21.553756 Stopping SMP IRQ Balancer: irqbalance. Jun 30 04:04:21.637681 Stopping nftables: none. Jun 30 04:04:21.637738 Stopping hotplug events dispatcher: systemd-udevd. Jun 30 04:04:21.649704 Saving the system clock to /dev/rtc0. Jun 30 04:04:22.201736 Hardware Clock updated to Sun Jun 30 04:04:23 UTC 2024. Jun 30 04:04:22.213742 Stopping Apache httpd web server: apache2. Jun 30 04:04:22.789610 Asking all remaining processes to terminate...done. Jun 30 04:04:23.161812 All processes ended within 1 seconds...done. Jun 30 04:04:23.161879 Deconfiguring network interfaces...ifdown: ignoring unknown interface eth0=eth0 Jun 30 04:04:23.281678 done. Jun 30 04:04:23.281732 [ 333.032797] EXT4-fs (sda1): unmounting filesystem. Jun 30 04:04:23.461688 Deactivating swap...done. Jun 30 04:04:23.521704 Unmounting local filesystems...done. Jun 30 04:04:23.533644 [ 333.323395] EXT4-fs (dm-0): re-mounted. Quota mode: none. Jun 30 04:04:23.761688 Will now restart. Jun 30 04:04:23.989738 [ 333.574932] asix 1-3.2.4:1.0 eth0: Link is Down Jun 30 04:04:24.013714 [ 333.642680] sd 0:0:0:0: [sda] Synchronizing SCSI cache Jun 30 04:04:24.073807 [ 333.650322] wake enabled for irq 101 (gpx1-4) Jun 30 04:04:24.085788 [ 333.653210] wake enabled for irq 102 (gpx1-5) Jun 30 04:04:24.085848 [ 333.657578] wake enabled for irq 103 (gpx1-6) Jun 30 04:04:24.085905 [ 333.661907] wake enabled for irq 104 (gpx1-7) Jun 30 04:04:24.097742 [ 333.666246] wake enabled for irq 105 (gpx2-0) Jun 30 04:04:24.097808 [ 333.670585] wake enabled for irq 106 (gpx2-1) Jun 30 04:04:24.109713 [ 333.675447] reboot: Reó Jun 30 04:04:24.445762 Jun 30 04:04:24.445785 Jun 30 04:04:24.445853 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 04:04:24.445905 Jun 30 04:04:24.445943 CPU: Exynos5250@1000MHz Jun 30 04:04:24.445985 Jun 30 04:04:24.446023 Board: Arndale Jun 30 04:04:24.457724 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 04:04:24.457786 ready Jun 30 04:04:24.457826 DRAM: 2 GiB Jun 30 04:04:24.457866 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 04:04:24.481671 trace: enabled Jun 30 04:04:24.517682 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 04:04:24.877588 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 04:04:24.937621 In: serial Jun 30 04:04:24.937651 Out: serial Jun 30 04:04:24.937674 Err: serial Jun 30 04:04:24.937696 SCSI: ARNDALE SCSI INIT Jun 30 04:04:24.937718 Target spinup took 0 ms. Jun 30 04:04:24.949641 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 04:04:24.949675 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 04:04:24.949701 Net: Net Initialization Skipped Jun 30 04:04:24.961632 No ethernet found. Jun 30 04:04:24.961663 Hostname: arndale-metrocentre Jun 30 04:04:24.961686 Hit any key to stop autoboot: 2  1  0 Jun 30 04:04:26.881694 (Re)start USB... Jun 30 04:04:26.881757 USB0: USB EHCI 1.00 Jun 30 04:04:26.893696 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 04:04:32.485715 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 04:04:32.497736 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 04:04:32.941715 Waiting for Ethernet connection... done. Jun 30 04:04:34.537743 BOOTP broadcast 1 Jun 30 04:04:34.537802 BOOTP broadcast 2 Jun 30 04:04:35.821854 DHCP client bound to address 10.149.64.44 (1340 ms) Jun 30 04:04:35.833701 Using asx0 device Jun 30 04:04:35.833730 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 04:04:35.833757 Filename 'pxelinux.0'. Jun 30 04:04:35.833779 Load address: 0x43e00000 Jun 30 04:04:35.845702 Loading: *### Jun 30 04:04:35.857731 2.2 MiB/s Jun 30 04:04:35.857785 done Jun 30 04:04:35.857825 Bytes transferred = 42430 (a5be hex) Jun 30 04:04:35.857868 missing environment variable: pxeuuid Jun 30 04:04:35.869770 Retrieving file: pxelinux.cfg/0A95402C Jun 30 04:04:35.869828 Using asx0 device Jun 30 04:04:35.869869 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 04:04:35.869916 Filename 'pxelinux.cfg/0A95402C'. Jun 30 04:04:35.881813 Load address: 0x51000000 Jun 30 04:04:35.881860 Loading: *# Jun 30 04:04:35.881901 31.3 KiB/s Jun 30 04:04:35.881940 done Jun 30 04:04:35.881977 Bytes transferred = 65 (41 hex) Jun 30 04:04:35.882019 Config file found Jun 30 04:04:35.893732 Ignoring unknown command: serial Jun 30 04:04:35.893789 1: local Jun 30 04:04:35.893830 scanning bus for devices... Jun 30 04:04:35.893871 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 04:04:35.917796 Type: Hard Disk Jun 30 04:04:35.917852 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 04:04:35.929804 Found 1 device(s). Jun 30 04:04:35.929859 Jun 30 04:04:35.929897 SCSI device 0: Jun 30 04:04:35.929937 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 04:04:35.929985 Type: Hard Disk Jun 30 04:04:35.941802 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 04:04:35.941864 ... is now current device Jun 30 04:04:35.941907 Scanning scsi 0... Jun 30 04:04:35.953721 Found U-Boot script /boot.scr Jun 30 04:04:36.121633 1782 bytes read in 33 ms (52.7 KiB/s) Jun 30 04:04:36.169707 ## Executing script at 50000000 Jun 30 04:04:36.169740 Loading dtbs/6.10.0-rc5+/exynos5250-arndale.dtb Jun 30 04:04:36.169765 46641 bytes read in 1562 ms (28.3 KiB/s) Jun 30 04:04:37.693607 983052 bytes read in 109 ms (8.6 MiB/s) Jun 30 04:04:37.813673 Loaded xen-4.19-unstable to 0x41000000 (f000c) Jun 30 04:04:37.825749 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan sched=credit2 Jun 30 04:04:37.837684 10785280 bytes read in 507 ms (20.3 MiB/s) Jun 30 04:04:38.341690 Loaded vmlinuz-6.10.0-rc5+ to 0x42000000 (a49200) Jun 30 04:04:38.353730 command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 04:04:38.365754 12142269 bytes read in 516 ms (22.4 MiB/s) Jun 30 04:04:38.893744 Loaded initrd.img-6.10.0-rc5+ to 0x43300000 (b946bd) Jun 30 04:04:38.893821 chosen { Jun 30 04:04:38.893862 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan sched=credit2"; Jun 30 04:04:38.905768 #size-cells = <0x00000001>; Jun 30 04:04:38.917739 #address-cells = <0x00000001>; Jun 30 04:04:38.917797 stdout-path = "serial2:115200n8"; Jun 30 04:04:38.917843 module@1 { Jun 30 04:04:38.917883 reg = <0x43300000 0x00b946bd>; Jun 30 04:04:38.917926 compatible = "xen,linux-initrd", "xen,multiboot-module"; Jun 30 04:04:38.929728 }; Jun 30 04:04:38.929781 module@0 { Jun 30 04:04:38.929822 bootargs = "ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Jun 30 04:04:38.941827 reg = <0x42000000 0x00a49200>; Jun 30 04:04:38.953756 compatible = "xen,linux-zimage", "xen,multiboot-module"; Jun 30 04:04:38.953819 }; Jun 30 04:04:38.953859 }; Jun 30 04:04:38.953898 Booting 0x41000000 - 0x43000000 Jun 30 04:04:38.953940 Kernel image @ 0x41000000 [ 0x000000 - 0x12f000 ] Jun 30 04:04:38.965759 ## Flattened Device Tree blob at 43000000 Jun 30 04:04:38.965856 Booting using the fdt blob at 0x43000000 Jun 30 04:04:38.965905 reserving fdt memory region: addr=43000000 size=c000 Jun 30 04:04:38.977736 Loading Device Tree to 4fff1000, end 4fffffff ... OK Jun 30 04:04:38.977796 Jun 30 04:04:38.977834 Starting kernel ...(fake run for tracing) Jun 30 04:04:38.989710 Jun 30 04:04:38.989761 Jun 30 04:04:38.989799 Starting kernel ... Jun 30 04:04:38.989840 Jun 30 04:04:38.989877 __ __ _ _ _ ___ _ _ _ Jun 30 04:04:39.037726 \ \/ /___ _ __ | || | / |/ _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Jun 30 04:04:39.049675 \ // _ \ '_ \ | || |_ | | (_) |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Jun 30 04:04:39.049708 / \ __/ | | | |__ _|| |\__, |__| |_| | | | \__ \ || (_| | |_) | | __/ Jun 30 04:04:39.061737 /_/\_\___|_| |_| |_|(_)_| /_/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Jun 30 04:04:39.073696 Jun 30 04:04:39.073724 (XEN) Xen version 4.19-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Sun Jun 30 01:52:15 UTC 2024 Jun 30 04:04:39.085734 (XEN) Latest ChangeSet: Wed Jun 26 16:07:30 2024 +0100 git:08f9b1dd9c Jun 30 04:04:39.085798 (XEN) build-id: a1f1bc3a5986d3ec30239a56d95725b8f32801f2 Jun 30 04:04:39.097741 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Jun 30 04:04:39.097806 (XEN) 32-bit Execution: Jun 30 04:04:39.097848 (XEN) Processor Features: 00001031:00011011 Jun 30 04:04:39.109728 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Jun 30 04:04:39.109782 (XEN) Extensions: GenericTimer Security Jun 30 04:04:39.109822 (XEN) Debug Features: 02010555 Jun 30 04:04:39.121770 (XEN) Auxiliary Features: 00000000 Jun 30 04:04:39.121827 (XEN) Memory Model Features: 10201105 20000000 Jun 30 04:04:39.121873 (XEN) 01240000 02102211 Jun 30 04:04:39.133732 (XEN) ISA Features: 02101110 13112111 21232041 Jun 30 04:04:39.133791 (XEN) 11112131 10011142 00000000 Jun 30 04:04:39.133836 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Jun 30 04:04:39.145775 (XEN) Set SYSRAM to 0000000041000074 (00200074) Jun 30 04:04:39.157736 (XEN) SMP: Allowing 2 CPUs Jun 30 04:04:39.157782 (XEN) enabled workaround for: ARM erratum 766422 Jun 30 04:04:39.157807 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Jun 30 04:04:39.169728 (XEN) GICv2 initialization: Jun 30 04:04:39.169784 (XEN) gic_dist_addr=0000000010481000 Jun 30 04:04:39.169829 (XEN) gic_cpu_addr=0000000010482000 Jun 30 04:04:39.181740 (XEN) gic_hyp_addr=0000000010484000 Jun 30 04:04:39.181799 (XEN) gic_vcpu_addr=0000000010486000 Jun 30 04:04:39.181844 (XEN) gic_maintenance_irq=25 Jun 30 04:04:39.181887 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Jun 30 04:04:39.193750 (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2) Jun 30 04:04:39.193811 (XEN) Initializing Credit2 scheduler Jun 30 04:04:39.205724 (XEN) load_precision_shift: 18 Jun 30 04:04:39.205781 (XEN) load_window_shift: 30 Jun 30 04:04:39.205824 (XEN) underload_balance_tolerance: 0 Jun 30 04:04:39.205867 (XEN) overload_balance_tolerance: -3 Jun 30 04:04:39.217742 (XEN) runqueues arrangement: socket Jun 30 04:04:39.217799 (XEN) cap enforcement granularity: 10ms Jun 30 04:04:39.217844 (XEN) load tracking window length 1073741824 ns Jun 30 04:04:39.229760 (XEN) Allocated console ring of 16 KiB. Jun 30 04:04:39.229820 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Jun 30 04:04:39.229871 (XEN) CPU0: Guest atomics will try 1 times before pausing the domain Jun 30 04:04:39.241759 (XEN) Bringing up CPU1 Jun 30 04:04:39.241814 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Jun 30 04:04:39.253761 (XEN) Brought up 2 CPUs Jun 30 04:04:39.253816 (XEN) CPU 1 booted. Jun 30 04:04:39.253858 (XEN) I/O virtualisation disabled Jun 30 04:04:39.253919 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Jun 30 04:04:39.253968 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Jun 30 04:04:39.265750 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Jun 30 04:04:39.265811 (XEN) Initializing Credit2 scheduler Jun 30 04:04:39.277757 (XEN) load_precision_shift: 18 Jun 30 04:04:39.277815 (XEN) load_window_shift: 30 Jun 30 04:04:39.277858 (XEN) underload_balance_tolerance: 0 Jun 30 04:04:39.277901 (XEN) overload_balance_tolerance: -3 Jun 30 04:04:39.289753 (XEN) runqueues arrangement: socket Jun 30 04:04:39.289811 (XEN) cap enforcement granularity: 10ms Jun 30 04:04:39.289856 (XEN) load tracking window length 1073741824 ns Jun 30 04:04:39.301753 (XEN) Adding cpu 0 to runqueue 0 Jun 30 04:04:39.301810 (XEN) First cpu on runqueue, activating Jun 30 04:04:39.301855 (XEN) Adding cpu 1 to runqueue 0 Jun 30 04:04:39.301897 (XEN) alternatives: Patching with alt table 002c2f84 -> 002c305c Jun 30 04:04:39.313748 (XEN) CPU0 will execute ICIALLU on guest exit Jun 30 04:04:39.313807 (XEN) CPU1 will execute ICIALLU on guest exit Jun 30 04:04:39.325741 (XEN) *** LOADING DOMAIN 0 *** Jun 30 04:04:39.325797 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Jun 30 04:04:39.325846 (XEN) Loading ramdisk from boot module @ 0000000043300000 Jun 30 04:04:39.337706 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Jun 30 04:04:39.337768 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Jun 30 04:04:39.901736 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Jun 30 04:04:39.913675 (XEN) Allocating PPI 16 for event channel interrupt Jun 30 04:04:39.937731 (XEN) d0: extended regions not supported for 32-bit guests Jun 30 04:04:39.949709 (XEN) Loading zImage from 0000000042000000 to 0000000067400000-0000000067e49200 Jun 30 04:04:39.949775 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d946bd Jun 30 04:04:40.045734 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b499 Jun 30 04:04:40.153737 (XEN) Initial low memory virq threshold set at 0x4000 pages. Jun 30 04:04:40.153800 (XEN) Scrubbing Free RAM in background Jun 30 04:04:40.153845 (XEN) Std. Loglevel: All Jun 30 04:04:40.153886 (XEN) Guest Loglevel: All Jun 30 04:04:40.165745 (XEN) *************************************************** Jun 30 04:04:40.165803 (XEN) WARNING: SILO mode is not enabled. Jun 30 04:04:40.165849 (XEN) It has implications on the security of the system, Jun 30 04:04:40.177732 (XEN) unless the communications have been forbidden between Jun 30 04:04:40.177792 (XEN) untrusted domains. Jun 30 04:04:40.177835 (XEN) *************************************************** Jun 30 04:04:40.189728 (XEN) 3... 2... 1... Jun 30 04:04:43.189760 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 30 04:04:43.201756 (XEN) Freed 352kB init memory. Jun 30 04:04:43.201813 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 04:04:44.329763 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Jun 30 04:04:44.353801 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Jun 30 04:04:44.353853 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Jun 30 04:04:44.365734 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Jun 30 04:04:44.365797 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:04:44.377668 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 04:04:44.413750 [ 0.000000] Linux version 6.10.0-rc5+ (osstest@himrod0) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Sun Jun 30 01:19:39 UTC 2024 Jun 30 04:04:44.425751 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 30 04:04:44.437790 [ 0.000000] CPU: div instructions available: patching division code Jun 30 04:04:44.437853 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 04:04:44.449789 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 04:04:44.461746 [ 0.000000] Memory policy: Data cache writealloc Jun 30 04:04:44.461805 [ 0.000000] Xen 4.19 support found Jun 30 04:04:44.461850 [ 0.000000] efi: UEFI not found. Jun 30 04:04:44.473769 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 on node -1 Jun 30 04:04:44.473831 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 04:04:44.473876 [ 0.000000] Zone ranges: Jun 30 04:04:44.485755 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Jun 30 04:04:44.485817 [ 0.000000] Normal empty Jun 30 04:04:44.485861 [ 0.000000] HighMem empty Jun 30 04:04:44.497743 [ 0.000000] Movable zone start for each node Jun 30 04:04:44.497802 [ 0.000000] Early memory node ranges Jun 30 04:04:44.497846 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Jun 30 04:04:44.509739 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Jun 30 04:04:44.509803 [ 0.000000] psci: probing for conduit method from DT. Jun 30 04:04:44.521753 [ 0.000000] psci: PSCIv1.1 detected in firmware. Jun 30 04:04:44.521813 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Jun 30 04:04:44.533745 [ 0.000000] psci: Trusted OS migration not required Jun 30 04:04:44.533805 [ 0.000000] psci: SMC Calling Convention v1.2 Jun 30 04:04:44.533852 [ 0.000000] percpu: Embedded 18 pages/cpu s41428 r8192 d24108 u73728 Jun 30 04:04:44.545754 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 04:04:44.557766 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 04:04:44.569731 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Jun 30 04:04:44.581761 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 131072 Jun 30 04:04:44.581824 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Jun 30 04:04:44.593745 [ 0.000000] Memory: 414600K/524288K available (15360K kernel code, 2268K rwdata, 6084K rodata, 2048K init, 439K bss, 44152K reserved, 65536K cma-reserved, 0K highmem) Jun 30 04:04:44.605764 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 04:04:44.617732 [ 0.000000] trace event string verifier disabled Jun 30 04:04:44.617791 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 04:04:44.617838 [ 0.000000] rcu: RCU event tracing is enabled. Jun 30 04:04:44.629742 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Jun 30 04:04:44.629805 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Jun 30 04:04:44.641752 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 04:04:44.653750 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 04:04:44.653811 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 04:04:44.665735 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 04:04:44.665797 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Jun 30 04:04:44.677737 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 04:04:44.689744 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 04:04:44.689814 [ 0.000013] Switching to timer-based delay loop, resolution 41ns Jun 30 04:04:44.701757 [ 0.000517] Console: colour dummy device 80x30 Jun 30 04:04:44.701817 [ 0.000536] printk: legacy console [hvc0] enabled Jun 30 04:04:44.713733 [ 0.299564] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Jun 30 04:04:44.713825 [ 0.309962] CPU: Testing write buffer coherency: ok Jun 30 04:04:44.725747 [ 0.314904] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 04:04:44.737699 [ 0.324457] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 04:04:44.737734 [ 0.330889] pid_max: default: 32768 minimum: 301 Jun 30 04:04:44.749719 [ 0.335655] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 04:04:44.749787 [ 0.342938] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 04:04:44.761757 [ 0.351358] /cpus/cpu@0 missing clock-frequency property Jun 30 04:04:44.761817 [ 0.356141] /cpus/cpu@1 missing clock-frequency property Jun 30 04:04:44.773747 [ 0.361560] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 04:04:44.773809 [ 0.368251] xen:grant_table: Grant tables using version 1 layout Jun 30 04:04:44.785643 [ 0.373391] Grant table initialized Jun 30 04:04:44.785675 [ 0.376946] xen:events: Using FIFO-based ABI Jun 30 04:04:44.785700 [ 0.381244] Xen: initializing cpu0 Jun 30 04:04:44.797759 [ 0.384767] Setting up static identity map for 0x60300000 - 0x603000ac Jun 30 04:04:44.797822 [ 0.392559] rcu: Hierarchical SRCU implementation. Jun 30 04:04:44.809724 [ 0.396162] rcu: Max phase no-delay instances is 1000. Jun 30 04:04:44.809786 [ 0.404395] EFI services will not be available. Jun 30 04:04:44.821692 [ 0.407716] smp: Bringing up secondary CPUs ... Jun 30 04:04:44.821753 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:04:44.893737 [ 0.481970] Xen: initializing cpu1 Jun 30 04:04:44.893796 [ 0.482130] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 04:04:44.905639 [ 0.482154] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 04:04:44.905679 [ 0.501123] smp: Brought up 1 node, 2 CPUs Jun 30 04:04:44.917639 [ 0.504784] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 04:04:44.917674 [ 0.511070] CPU: All CPU(s) started in SVC mode. Jun 30 04:04:44.929667 [ 0.516974] devtmpfs: initialized Jun 30 04:04:44.929725 [ 0.529343] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 04:04:44.941644 [ 0.535897] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Jun 30 04:04:44.953652 [ 0.545568] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 04:04:44.965712 [ 0.553483] pinctrl core: initialized pinctrl subsystem Jun 30 04:04:44.965767 [ 0.560100] DMI not present or invalid. Jun 30 04:04:44.965812 [ 0.563603] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 04:04:44.977722 [ 0.570227] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 04:04:44.989624 [ 0.579566] thermal_sys: Registered thermal governor 'step_wise' Jun 30 04:04:44.989658 [ 0.579723] software IO TLB: area num 2. Jun 30 04:04:45.001641 [ 0.588397] software IO TLB: only able to allocate 8 MB Jun 30 04:04:45.001674 [ 0.595470] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Jun 30 04:04:45.013673 [ 0.600673] No ATAGs? Jun 30 04:04:45.013703 [ 0.602976] hw-breakpoint: Failed to enable monitor mode on CPU 0. Jun 30 04:04:45.013731 [ 0.611683] Serial: AMBA PL011 UART driver Jun 30 04:04:45.025697 [ 0.658296] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 65 Jun 30 04:04:45.073616 [ 0.686734] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 30 04:04:45.097685 [ 0.710667] xen:balloon: Initialising balloon driver Jun 30 04:04:45.121753 [ 0.717117] iommu: Default domain type: Translated Jun 30 04:04:45.133727 [ 0.720533] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 04:04:45.133790 [ 0.729317] SCSI subsystem initialized Jun 30 04:04:45.145638 [ 0.732078] usbcore: registered new interface driver usbfs Jun 30 04:04:45.145695 [ 0.737314] usbcore: registered new interface driver hub Jun 30 04:04:45.145723 [ 0.742652] usbcore: registered new device driver usb Jun 30 04:04:45.157646 [ 0.749376] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 04:04:45.157679 [ 0.752965] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 04:04:45.169642 [ 0.759222] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 04:04:45.169676 [ 0.764287] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 04:04:45.181690 [ 0.769217] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 04:04:45.181752 [ 0.775255] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 04:04:45.193747 [ 0.781030] pps_core: LinuxPPS API ver. 1 registered Jun 30 04:04:45.193808 [ 0.785425] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 04:04:45.205754 [ 0.794651] PTP clock support registered Jun 30 04:04:45.205812 [ 0.798886] EDAC MC: Ver: 3.0.0 Jun 30 04:04:45.205856 [ 0.802143] scmi_core: SCMI protocol bus registered Jun 30 04:04:45.217744 [ 0.808831] vgaarb: loaded Jun 30 04:04:45.217800 [ 0.812079] clocksource: Switched to clocksource arch_sys_counter Jun 30 04:04:45.229679 [ 0.829165] NET: Registered PF_INET protocol family Jun 30 04:04:45.241744 [ 0.832825] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Jun 30 04:04:45.253735 [ 0.840715] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 04:04:45.253835 [ 0.848426] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 04:04:45.265762 [ 0.856210] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Jun 30 04:04:45.277751 [ 0.864046] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Jun 30 04:04:45.277815 [ 0.871321] TCP: Hash tables configured (established 4096 bind 4096) Jun 30 04:04:45.289748 [ 0.877696] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 04:04:45.289812 [ 0.884263] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 04:04:45.301753 [ 0.891358] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 04:04:45.301815 [ 0.897524] RPC: Registered named UNIX socket transport module. Jun 30 04:04:45.313737 [ 0.902998] RPC: Registered udp transport module. Jun 30 04:04:45.313797 [ 0.907753] RPC: Registered tcp transport module. Jun 30 04:04:45.325750 [ 0.912548] RPC: Registered tcp-with-tls transport module. Jun 30 04:04:45.325812 [ 0.918100] RPC: Registered tcp NFSv4.1 backchannel transport module. Jun 30 04:04:45.337744 [ 0.924612] PCI: CLS 0 bytes, default 64 Jun 30 04:04:45.337802 [ 0.930010] Initialise system trusted keyrings Jun 30 04:04:45.337849 [ 0.933353] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Jun 30 04:04:45.349760 [ 0.939853] squashfs: version 4.0 (2009/01/31) Phillip Lougher Jun 30 04:04:45.349822 [ 0.945736] NFS: Registering the id_resolver key type Jun 30 04:04:45.361738 [ 0.950660] Key type id_resolver registered Jun 30 04:04:45.361796 [ 0.954899] Key type id_legacy registered Jun 30 04:04:45.373734 [ 0.959003] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Jun 30 04:04:45.373799 [ 0.965760] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Jun 30 04:04:45.385718 [ 0.973470] Trying to unpack rootfs image as initramfs... Jun 30 04:04:45.385778 [ 0.994880] Key type asymmetric registered Jun 30 04:04:45.409755 [ 0.997614] Asymmetric key parser 'x509' registered Jun 30 04:04:45.409816 [ 1.002681] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) Jun 30 04:04:45.421746 [ 1.010028] io scheduler mq-deadline registered Jun 30 04:04:45.421804 [ 1.014649] io scheduler kyber registered Jun 30 04:04:45.421849 [ 1.018757] io scheduler bfq registered Jun 30 04:04:45.433700 [ 1.160093] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 04:04:45.577818 [ 1.166337] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 04:04:45.589677 [ 1.220390] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 04:04:45.637740 [ 1.226656] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 04:04:45.649672 [ 1.254894] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 04:04:45.673739 [ 1.261139] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 04:04:45.673810 [ 1.312228] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 04:04:45.721745 [ 1.318461] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 04:04:45.733750 [ 1.331216] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 04:04:45.745761 [ 1.393557] xen:xen_evtchn: Event-channel device installed Jun 30 04:04:45.805719 [ 1.469634] Freeing initrd memory: 11860K Jun 30 04:04:45.877703 [ 1.493256] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 04:04:45.901718 [ 1.504264] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 04:04:45.925741 [ 1.512469] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 04:04:45.925812 [ 1.521339] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 04:04:45.937767 [ 1.530369] SuperH (H)SCI(F) driver initialized Jun 30 04:04:45.937825 [ 1.534702] STMicroelectronics ASC driver initialized Jun 30 04:04:45.949821 [ 1.539530] STM32 USART driver initialized Jun 30 04:04:45.949880 [ 1.544972] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 04:04:45.961650 [ 1.553885] random: crng init done Jun 30 04:04:45.961714 [ 1.561371] brd: module loaded Jun 30 04:04:45.973625 [ 1.567297] loop: module loaded Jun 30 04:04:45.973683 [ 1.582865] Invalid max_queues (4), will use default max: 2. Jun 30 04:04:45.997619 [ 1.601499] tun: Universal TUN/TAP device driver, 1.6 Jun 30 04:04:46.009646 [ 1.605377] CAN device driver interface Jun 30 04:04:46.021669 [ 1.610491] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Jun 30 04:04:46.021669 [ 1.621717] xen_netfront: Initialising Xen virtual ethernet driver Jun 30 04:04:46.033647 [ 1.626589] pegasus: Pegasus/Pegasus II USB Ethernet driver Jun 30 04:04:46.045661 [ 1.632205] usbcore: registered new interface driver pegasus Jun 30 04:04:46.045719 [ 1.637933] usbcore: registered new interface driver asix Jun 30 04:04:46.057660 [ 1.643396] usbcore: registered new interface driver ax88179_178a Jun 30 04:04:46.057660 [ 1.649545] usbcore: registered new interface driver cdc_ether Jun 30 04:04:46.069653 [ 1.655464] usbcore: registered new interface driver smsc75xx Jun 30 04:04:46.069700 [ 1.661267] usbcore: registered new interface driver smsc95xx Jun 30 04:04:46.081671 [ 1.667092] usbcore: registered new interface driver net1080 Jun 30 04:04:46.081735 [ 1.672826] usbcore: registered new interface driver cdc_subset Jun 30 04:04:46.081784 [ 1.678797] usbcore: registered new interface driver zaurus Jun 30 04:04:46.093622 [ 1.684455] usbcore: registered new interface driver cdc_ncm Jun 30 04:04:46.093679 [ 1.693812] usbcore: registered new interface driver usb-storage Jun 30 04:04:46.105645 [ 1.704316] i2c_dev: i2c /dev entries driver Jun 30 04:04:46.117650 [ 1.722714] device-mapper: uevent: version 1.0.3 Jun 30 04:04:46.129622 [ 1.726130] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev Jun 30 04:04:46.141683 [ 1.735748] cpu cpu0: OPP table can't be empty Jun 30 04:04:46.153632 [ 1.740460] failed to register cpuidle driver Jun 30 04:04:46.153717 [ 1.743869] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Jun 30 04:04:46.165625 [ 1.752199] sdhci: Secure Digital Host Controller Interface driver Jun 30 04:04:46.165690 [ 1.757204] sdhci: Copyright(c) Pierre Ossman Jun 30 04:04:46.165736 [ 1.765270] sdhci-pltfm: SDHCI platform and OF driver helper Jun 30 04:04:46.177593 [ 1.782170] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 04:04:46.189605 [ 1.787621] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Jun 30 04:04:46.201679 [ 1.794318] usbcore: registered new interface driver usbhid Jun 30 04:04:46.213648 [ 1.798973] usbhid: USB HID core driver Jun 30 04:04:46.213708 [ 1.809950] NET: Registered PF_INET6 protocol family Jun 30 04:04:46.225658 [ 1.814373] Segment Routing with IPv6 Jun 30 04:04:46.225717 [ 1.817298] In-situ OAM (IOAM) with IPv6 Jun 30 04:04:46.225763 [ 1.821326] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Jun 30 04:04:46.237656 [ 1.827812] NET: Registered PF_PACKET protocol family Jun 30 04:04:46.237656 [ 1.832445] can: controller area network core Jun 30 04:04:46.249669 [ 1.836835] NET: Registered PF_CAN protocol family Jun 30 04:04:46.249725 [ 1.841662] can: raw protocol Jun 30 04:04:46.249751 [ 1.844718] can: broadcast manager protocol Jun 30 04:04:46.261664 [ 1.848979] can: netlink gateway - max_hops=1 Jun 30 04:04:46.261718 [ 1.853717] Key type dns_resolver registered Jun 30 04:04:46.261765 [ 1.858407] ThumbEE CPU extension supported. Jun 30 04:04:46.273646 [ 1.862111] Registering SWP/SWPB emulation handler Jun 30 04:04:46.273646 [ 1.876460] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level Jun 30 04:04:46.297535 [ 1.883366] Loading compiled-in X.509 certificates Jun 30 04:04:46.297575 [ 1.926522] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 04:04:46.333724 [ 1.930123] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 04:04:46.345685 [ 1.937073] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 04:04:46.357745 [ 1.944924] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 04:04:46.357815 [ 1.986340] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 04:04:46.393675 [ 1.995184] s5m-rtc s5m-rtc: setting system clock to 2024-06-30T04:04:48 UTC (1719720288) Jun 30 04:04:46.405732 [ 2.006318] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 04:04:46.417731 [ 2.010932] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 04:04:46.429727 [ 2.015365] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 04:04:46.429799 [ 2.022126] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 04:04:46.429825 [ 2.027929] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 04:04:46.441777 [ 2.034168] clk: Not disabling unused clocks Jun 30 04:04:46.441810 [ 2.037605] PM: genpd: Disabling unused power domains Jun 30 04:04:46.453675 [ 2.046168] Freeing unused kernel image (initmem) memory: 2048K Jun 30 04:04:46.453709 [ 2.052504] Run /init as init process Jun 30 04:04:46.465688 Loading, please wait... Jun 30 04:04:46.489687 Starting systemd-udevd version 252.26-1~deb12u2 Jun 30 04:04:46.561630 [ 3.327663] i2c-gpio i2c-10: using lines 552 (SDA) and 553 (SCL) Jun 30 04:04:47.737715 [ 3.395924] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 04:04:47.809658 [ 3.441740] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 04:04:47.857780 [ 3.442294] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 04:04:47.869654 [ 3.478042] Synopsys Designware Multimedia Card Interface Driver Jun 30 04:04:47.893725 [ 3.488415] phy phy-12130000.phy.4: phy_power_on was called before phy_init Jun 30 04:04:47.905767 [ 3.494050] exynos-ohci 12120000.usb: USB Host Controller Jun 30 04:04:47.905869 [ 3.500507] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Jun 30 04:04:47.917756 [ 3.509475] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 Jun 30 04:04:47.917852 [ 3.593405] phy phy-12130000.phy.4: phy_power_on was called before phy_init Jun 30 04:04:48.013746 [ 3.595069] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 30 04:04:48.013812 [ 3.599009] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 04:04:48.025685 [ 3.606530] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 30 04:04:48.025721 [ 3.611532] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Jun 30 04:04:48.037699 [ 3.640828] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 30 04:04:48.049681 [ 3.649695] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 30 04:04:48.061727 [ 3.659561] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 30 04:04:48.073761 [ 3.665861] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 30 04:04:48.085748 [ 3.672318] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 30 04:04:48.085817 [ 3.677810] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo Jun 30 04:04:48.097830 [ 3.687641] mmc_host mmc0: card is polling. Jun 30 04:04:48.097889 [ 3.690564] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 30 04:04:48.109743 [ 3.698696] ahci-dwc 122f0000.sata: AHCI vers 0001.0300, 32 command slots, 6 Gbps, platform mode Jun 30 04:04:48.121736 [ 3.703172] hub 1-0:1.0: USB hub found Jun 30 04:04:48.121806 [ 3.707522] ahci-dwc 122f0000.sata: 1/1 ports implemented (port mask 0x1) Jun 30 04:04:48.121857 [ 3.718237] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 30 04:04:48.133686 [ 3.718265] hub 1-0:1.0: 3 ports detected Jun 30 04:04:48.145745 [ 3.732377] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 30 04:04:48.145814 [ 3.737991] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 30 04:04:48.157710 [ 3.743544] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 127,32 bit host data width,128 deep fifo Jun 30 04:04:48.157783 [ 3.759970] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 04:04:48.181687 [ 3.792386] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 04:04:48.205733 [ 3.814077] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 Jun 30 04:04:48.233474 [ 3.815235] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 04:04:48.241675 [ 3.850269] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 04:04:48.265656 [ 3.855305] scsi host0: ahci-dwc Jun 30 04:04:48.265719 [ 3.856113] hub 2-0:1.0: USB hub found Jun 30 04:04:48.265764 [ 3.861411] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 128 lpm-pol 0 Jun 30 04:04:48.277797 [ 3.862131] hub 2-0:1.0: 3 ports detected Jun 30 04:04:48.289703 [ 3.884270] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Jun 30 04:04:48.301726 [ 3.892186] s3c-rtc 101e0000.rtc: registered as rtc1 Jun 30 04:04:48.301792 [ 3.939237] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 30 04:04:48.361730 [ 3.948669] mmc0: new DDR MMC card at address 0001 Jun 30 04:04:48.361763 [ 3.965110] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Jun 30 04:04:48.373701 [ 3.977561] mmcblk0: p1 p2 p3 p4 Jun 30 04:04:48.385649 [ 3.984972] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Jun 30 04:04:48.397751 [ 3.986224] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 04:04:48.409814 [ 3.993128] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Jun 30 04:04:48.409903 [ 4.000914] mmc1: new high speed SDHC card at address aaaa Jun 30 04:04:48.421727 [ 4.007751] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Jun 30 04:04:48.421762 [ 4.015835] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Jun 30 04:04:48.433679 [ 4.372373] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 30 04:04:48.781734 [ 4.378048] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 30 04:04:48.797816 [ 4.384017] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 30 04:04:48.797919 [ 4.391552] ata1.00: configured for UDMA/133 Jun 30 04:04:48.797947 [ 4.395450] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 30 04:04:48.809761 [ 4.404477] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 30 04:04:48.821740 [ 4.410615] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 30 04:04:48.821775 [ 4.416228] sd 0:0:0:0: [sda] Write Protect is off Jun 30 04:04:48.833766 [ 4.420863] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 30 04:04:48.833766 [ 4.430060] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 30 04:04:48.845720 [ 4.457210] sda: sda1 sda2 < sda5 > Jun 30 04:04:48.869803 [ 4.459946] sd 0:0:0:0: [sda] Attached SCSI disk Jun 30 04:04:48.869855 [ 4.709056] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Jun 30 04:04:49.121641 [ 4.752025] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 04:04:49.169730 [ 4.756545] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 04:04:49.169801 [ 4.773377] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002000010 Jun 30 04:04:49.193749 [ 4.781705] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Jun 30 04:04:49.193811 [ 4.787732] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 04:04:49.205717 [ 4.793075] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 04:04:49.205792 [ 4.800774] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 04:04:49.217721 [ 4.808643] hub 3-0:1.0: USB hub found Jun 30 04:04:49.217752 [ 4.811463] hub 3-0:1.0: 1 port detected Jun 30 04:04:49.229648 [ 4.824144] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 04:04:49.241780 [ 4.832205] hub 4-0:1.0: USB hub found Jun 30 04:04:49.241842 [ 4.834782] hub 4-0:1.0: 1 port detected Jun 30 04:04:49.241889 [ 5.092412] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 04:04:49.505775 [ 5.260888] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 04:04:49.673716 [ 5.392149] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 04:04:49.805682 [ 5.500371] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 04:04:49.913746 [ 5.608608] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 04:04:50.021806 [ 5.716809] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 04:04:50.129791 [ 6.043544] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 04:04:50.465636 [ 6.220795] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 04:04:50.633658 [ 6.335166] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 04:04:50.753709 [ 6.442925] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 04:04:50.861601 [ 6.550638] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 04:04:50.969606 [ 6.658384] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 04:04:51.077784 [ 6.666001] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 04:04:51.077853 Begin: Loading essential drivers ... done. Jun 30 04:04:51.149676 Begin: Running /scripts/init-premount ... done. Jun 30 04:04:54.163154 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 30 04:04:54.165695 Begin: Running /scripts/local-premount ... done. Jun 30 04:04:54.177639 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 30 04:04:54.225655 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 30 04:04:54.333736 /dev/mapper/arndale--metrocentre--vg-root: clean, 46073/1220608 files, 606043/4882432 blocks Jun 30 04:04:54.597711 done. Jun 30 04:04:54.609562 [ 10.207237] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 30 04:04:54.621611 [ 10.598604] EXT4-fs (dm-0): mounted filesystem 65673a9b-ea3e-4935-8952-123cabbc5918 ro with ordered data mode. Quota mode: disabled. Jun 30 04:04:55.020606 done. Jun 30 04:04:55.020606 Begin: Running /scripts/local-bottom ... done. Jun 30 04:04:55.056745 Begin: Running /scripts/init-bottom ... done. Jun 30 04:04:55.104578 INIT: version 3.06 booting Jun 30 04:04:55.560641 INIT: No inittab.d directory found Jun 30 04:04:55.632612 Using makefile-style concurrent boot in runlevel S. Jun 30 04:04:55.948813 Starting hotplug events dispatcher: systemd-udevd. Jun 30 04:04:57.648722 Synthesizing the initial hotplug events (subsystems)...done. Jun 30 04:04:58.092688 Synthesizing the initial hotplug events (devices)...done. Jun 30 04:04:58.944542 Waiting for /dev to be fully populated...[ 14.635027] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 30 04:04:59.052586 [ 14.693245] mc: Linux media interface: v0.10 Jun 30 04:04:59.104586 [ 14.702629] s5p-secss 10830000.sss: s5p-sss driver registered Jun 30 04:04:59.116574 [ 14.818909] videodev: Linux video capture interface: v2.00 Jun 30 04:04:59.236699 [ 15.097432] s5p-mfc 11000000.codec: Adding to iommu group 0 Jun 30 04:04:59.512561 [ 15.111083] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Jun 30 04:04:59.524554 [ 15.135244] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 04:04:59.548745 [ 15.156469] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 04:04:59.572646 [ 15.164734] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 04:04:59.584595 [ 15.174048] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 04:04:59.596580 [ 15.186314] s5p-mfc 11000000.codec: decoder registered as /dev/video0 Jun 30 04:04:59.596580 [ 15.191998] s5p-mfc 11000000.codec: encoder registered as /dev/video1 Jun 30 04:04:59.608571 [ 15.257999] exynos-gsc 13e00000.gsc: Adding to iommu group 1 Jun 30 04:04:59.668767 [ 15.264946] exynos-gsc 13e10000.gsc: Adding to iommu group 2 Jun 30 04:04:59.680744 [ 15.271549] exynos-gsc 13e20000.gsc: Adding to iommu group 3 Jun 30 04:04:59.680778 [ 15.278415] exynos-gsc 13e30000.gsc: Adding to iommu group 4 Jun 30 04:04:59.692811 [ 15.342506] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 04:04:59.755644 [ 15.482689] usb3503 usb-hub: switched to HUB mode Jun 30 04:04:59.900670 [ 15.486556] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 04:04:59.900670 [ 15.492728] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 04:04:59.912620 [ 15.606722] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 04:05:00.024689 [ 15.718326] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 04:05:00.132693 [ 15.827067] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 04:05:00.240583 [ 15.952244] usb 2-3: new high-speed USB device number 2 using exynos-ehci Jun 30 04:05:00.360612 [ 16.018491] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Jun 30 04:05:00.432600 [ 16.040703] I/O error, dev mmcblk1, sector 7743713 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 Jun 30 04:05:00.456509 [ 16.096482] wm8994 3-001a: Device is not a WM8994, ID is 0 Jun 30 04:05:00.504540 [ 16.113247] wm8994 3-001a: probe with driver wm8994 failed with error -22 Jun 30 04:05:00.532547 [ 16.179068] hub 2-3:1.0: USB hub found Jun 30 04:05:00.592517 [ 16.193653] hub 2-3:1.0: 3 ports detected Jun 30 04:05:00.604519 [ 16.312990] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 04:05:00.724612 [ 16.320704] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 04:05:00.736582 [ 16.329437] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 04:05:00.748625 [ 16.340392] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 04:05:00.760620 [ 16.349230] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 04:05:00.760620 [ 16.357695] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 04:05:00.772628 [ 16.388196] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 04:05:00.808649 [ 16.561827] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 04:05:00.980767 [ 16.593265] usb 2-3.2: new high-speed USB device number 3 using exynos-ehci Jun 30 04:05:01.004775 [ 16.676225] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 04:05:01.088814 [ 16.744759] hub 2-3.2:1.0: USB hub found Jun 30 04:05:01.160752 [ 16.747707] hub 2-3.2:1.0: 4 ports detected Jun 30 04:05:01.160812 [ 16.784010] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 04:05:01.196797 [ 16.803876] usbcore: registered new device driver onboard-usb-dev Jun 30 04:05:01.220728 [ 16.891806] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 04:05:01.304722 [ 16.932899] hub 2-3.2:1.0: USB hub found Jun 30 04:05:01.340729 [ 16.935856] hub 2-3.2:1.0: 4 ports detected Jun 30 04:05:01.352695 [ 16.947891] hub 2-3.2:1.0: USB hub found Jun 30 04:05:01.364738 [ 16.950836] hub 2-3.2:1.0: 4 ports detected Jun 30 04:05:01.364798 [ 17.000681] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 04:05:01.412736 [ 17.008376] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 04:05:01.424780 done. Jun 30 04:05:01.448636 [ 17.312352] usb 2-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 30 04:05:01.728723 [ 17.435176] EXT4-fs (dm-0): re-mounted 65673a9b-ea3e-4935-8952-123cabbc5918 r/w. Quota mode: disabled. Jun 30 04:05:01.848703 [ 17.501814] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 30 04:05:01.920685 Checking file systems.../dev/sda1: clean, 2179/61056 files, 44463/243968 blocks Jun 30 04:05:03.740570 done. Jun 30 04:05:03.764539 Cleaning up temporary files... /tmp. Jun 30 04:05:04.028638 [ 19.836337] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 30 04:05:04.256545 [ 19.888427] EXT4-fs (sda1): mounted filesystem a06ca147-65c2-4443-8310-b4d3ede9d401 r/w with ordered data mode. Quota mode: disabled. Jun 30 04:05:04.304586 [ 19.988591] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k Jun 30 04:05:04.412534 Mounting local filesystems...done. Jun 30 04:05:04.688718 Activating swapfile swap, if any...done. Jun 30 04:05:04.716517 Cleaning up temporary files.... Jun 30 04:05:04.724478 Starting Setting kernel variables: sysctl. Jun 30 04:05:04.884693 [ 21.809236] xenbr0: port 1(eth0) entered blocking state Jun 30 04:05:06.216534 [ 21.813137] xenbr0: port 1(eth0) entered disabled state Jun 30 04:05:06.228562 [ 21.818415] asix 2-3.2.4:1.0 eth0: entered allmulticast mode Jun 30 04:05:06.228562 [ 21.824300] asix 2-3.2.4:1.0 eth0: entered promiscuous mode Jun 30 04:05:06.240600 [ 21.835239] asix 2-3.2.4:1.0 eth0: configuring for phy/internal link mode Jun 30 04:05:06.252730 Configuring network interfaces...RTNETLINK answers: Operation not supported Jun 30 04:05:08.001656 Jun 30 04:05:08.001697 Waiting for xenbr0 to get ready (MAXWAIT is 2 seconds). Jun 30 04:05:08.013623 [ 24.020740] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 30 04:05:08.433699 [ 24.026800] xenbr0: port 1(eth0) entered blocking state Jun 30 04:05:08.433744 [ 24.031978] xenbr0: port 1(eth0) entered forwarding state Jun 30 04:05:08.445606 done. Jun 30 04:05:08.613609 Cleaning up temporary files.... Jun 30 04:05:08.685632 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Jun 30 04:05:08.769560 Starting nftables: none Jun 30 04:05:08.817599 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Jun 30 04:05:08.925631 failed! Jun 30 04:05:08.925660 startpar: service(s) returned failure: nftables ... failed! Jun 30 04:05:08.937616 INIT: Entering runlevel: 2 Jun 30 04:05:08.949649 Using makefile-style concurrent boot in runlevel 2. Jun 30 04:05:08.973496 Starting Apache httpd web server: apache2AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.149.64.44. Set the 'ServerName' directive globally to suppress this message Jun 30 04:05:09.765616 . Jun 30 04:05:10.833652 Starting NTP server: ntpd2024-06-30T04:05:12 ntpd[1145]: INIT: ntpd ntpsec-1.2.2: Starting Jun 30 04:05:11.205712 2024-06-30T04:05:12 ntpd[1145]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 30 04:05:11.217682 . Jun 30 04:05:11.217742 Starting SMP IRQ Balancer: irqbalance. Jun 30 04:05:11.637634 Starting system message bus: dbus. Jun 30 04:05:11.805649 Starting OpenBSD Secure Shell server: sshd. Jun 30 04:05:12.633690 Starting /usr/local/sbin/oxenstored... Jun 30 04:05:14.673726 Setting domain 0 name, domid and JSON config... Jun 30 04:05:14.673810 Done setting up Dom0 Jun 30 04:05:14.673854 Starting xenconsoled... Jun 30 04:05:14.673896 Starting QEMU as disk backend for dom0 Jun 30 04:05:14.685655 Jun 30 04:05:15.765702 Debian GNU/Linux 12 arndale-metrocentre hvc0 Jun 30 04:05:15.793156 Jun 30 04:05:15.793191 arndale-metrocentre login: [ 37.773929] platform sound: deferred probe pending: arndale-audio: snd_soc_register_card() failed Jun 30 04:05:22.185745 [ 112.895105] EXT4-fs (dm-3): mounted filesystem b215722a-b2ab-4a5f-aa89-24e1549e4214 r/w with ordered data mode. Quota mode: disabled. Jun 30 04:06:37.313752 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 04:06:54.840585 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 04:13:36.233644 [ 626.678267] EXT4-fs (dm-3): unmounting filesystem b215722a-b2ab-4a5f-aa89-24e1549e4214. Jun 30 04:15:11.084878 [ 634.065810] EXT4-fs (dm-3): mounted filesystem b215722a-b2ab-4a5f-aa89-24e1549e4214 r/w with ordered data mode. Quota mode: disabled. Jun 30 04:15:18.473785 [ 639.499547] EXT4-fs (dm-3): unmounting filesystem b215722a-b2ab-4a5f-aa89-24e1549e4214. Jun 30 04:15:23.909664 [ 655.187090] xenbr0: port 2(vif1.0) entered blocking state Jun 30 04:15:39.588476 [ 655.191128] xenbr0: port 2(vif1.0) entered disabled state Jun 30 04:15:39.600572 [ 655.196670] vif vif-1-0 vif1.0: entered allmulticast mode Jun 30 04:15:39.600572 [ 655.202297] vif vif-1-0 vif1.0: entered promiscuous mode Jun 30 04:15:39.612514 (XEN) d1v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 04:15:40.903293 (XEN) d1v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:15:40.903376 (XEN) d1v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:15:40.903411 (XEN) d1v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:15:40.903437 (XEN) d1v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:15:40.903462 [ 656.848766] xen-blkback: backend/vbd/1/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 04:15:41.257760 [ 656.902490] xen-blkback: backend/vbd/1/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 04:15:41.305677 (XEN) common/grant_table.c:1909:d1v1 Expanding d1 grant table from 1 to 2 frames Jun 30 04:15:41.329792 (XEN) common/grant_table.c:1909:d1v1 Expanding d1 grant table from 2 to 3 frames Jun 30 04:15:41.329856 [ 657.011884] vif vif-1-0 vif1.0: Guest Rx ready Jun 30 04:15:41.413736 [ 657.015276] xenbr0: port 2(vif1.0) entered blocking state Jun 30 04:15:41.425720 [ 657.023167] xenbr0: port 2(vif1.0) entered forwarding state Jun 30 04:15:41.425760 (XEN) gnttab_mark_dirty not implemented yet Jun 30 04:15:41.437707 (XEN) common/grant_table.c:1909:d1v0 Expanding d1 grant table from 3 to 4 frames Jun 30 04:16:05.289731 [ 711.084574] xenbr0: port 2(vif1.0) entered disabled state Jun 30 04:16:35.485715 [ 711.443791] xenbr0: port 2(vif1.0) entered disabled state Jun 30 04:16:35.845797 [ 711.449373] vif vif-1-0 vif1.0 (unregistering): left allmulticast mode Jun 30 04:16:35.857745 [ 711.454609] vif vif-1-0 vif1.0 (unregistering): left promiscuous mode Jun 30 04:16:35.857810 [ 711.461076] xenbr0: port 2(vif1.0) entered disabled state Jun 30 04:16:35.869717 [ 739.037996] xenbr0: port 2(vif2.0) entered blocking state Jun 30 04:17:03.441012 [ 739.042039] xenbr0: port 2(vif2.0) entered disabled state Jun 30 04:17:03.452973 [ 739.047525] vif vif-2-0 vif2.0: entered allmulticast mode Jun 30 04:17:03.453004 [ 739.053174] vif vif-2-0 vif2.0: entered promiscuous mode Jun 30 04:17:03.464951 (XEN) d2v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 04:17:04.620719 (XEN) d2v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:17:04.632699 (XEN) d2v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:17:04.668684 (XEN) d2v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:17:04.692690 (XEN) d2v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:17:04.728733 [ 740.678678] xen-blkback: backend/vbd/2/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 04:17:05.086015 (XEN) common/grant_table.c:1909:d2v1 Expanding d2 grant table from 1 to 2 frames Jun 30 04:17:05.133802 (XEN) common/grant_table.c:1909:d2v1 Expanding d2 grant table from 2 to 3 frames Jun 30 04:17:05.145752 [ 740.746920] xen-blkback: backend/vbd/2/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 04:17:05.157709 [ 740.855913] vif vif-2-0 vif2.0: Guest Rx ready Jun 30 04:17:05.265759 [ 740.859859] xenbr0: port 2(vif2.0) entered blocking state Jun 30 04:17:05.265801 [ 740.866516] xenbr0: port 2(vif2.0) entered forwarding state Jun 30 04:17:05.277653 [ 791.531863] xenbr0: port 2(vif2.0) entered disabled state Jun 30 04:17:55.937794 [ 791.792681] xenbr0: port 2(vif2.0) entered disabled state Jun 30 04:17:56.201779 [ 791.800693] vif vif-2-0 vif2.0 (unregistering): left allmulticast mode Jun 30 04:17:56.201867 [ 791.805931] vif vif-2-0 vif2.0 (unregistering): left promiscuous mode Jun 30 04:17:56.213749 [ 791.812421] xenbr0: port 2(vif2.0) entered disabled state Jun 30 04:17:56.213811 [ 819.782689] xenbr0: port 2(vif3.0) entered blocking state Jun 30 04:18:24.189778 [ 819.786722] xenbr0: port 2(vif3.0) entered disabled state Jun 30 04:18:24.189829 [ 819.792279] vif vif-3-0 vif3.0: entered allmulticast mode Jun 30 04:18:24.201729 [ 819.797841] vif vif-3-0 vif3.0: entered promiscuous mode Jun 30 04:18:24.201792 (XEN) d3v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 04:18:25.353815 (XEN) d3v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:18:25.365612 (XEN) d3v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:18:25.401682 (XEN) d3v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:18:25.425697 (XEN) d3v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:18:25.461699 [ 821.437199] xen-blkback: backend/vbd/3/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 04:18:25.845686 [ 821.499269] xen-blkback: backend/vbd/3/51714: using 2 queues, protocol 1 (arm-abi) persistent(XEN) common/grant_table.c:1909:d3v2 Expanding d3 grant table from 1 to 2 frames Jun 30 04:18:25.917829 grants Jun 30 04:18:25.917887 (XEN) common/grant_table.c:1909:d3v2 Expanding d3 grant table from 2 to 3 frames Jun 30 04:18:25.917939 [ 821.619667] vif vif-3-0 vif3.0: Guest Rx ready Jun 30 04:18:26.025715 [ 821.628611] xenbr0: port 2(vif3.0) entered blocking state Jun 30 04:18:26.037740 [ 821.635430] xenbr0: port 2(vif3.0) entered forwarding state Jun 30 04:18:26.037802 [ 872.958794] xenbr0: port 2(vif3.0) entered disabled state Jun 30 04:19:17.357957 [ 873.212791] xenbr0: port 2(vif3.0) entered disabled state Jun 30 04:19:17.621853 [ 873.220556] vif vif-3-0 vif3.0 (unregistering): left allmulticast mode Jun 30 04:19:17.621889 [ 873.225774] vif vif-3-0 vif3.0 (unregistering): left promiscuous mode Jun 30 04:19:17.633865 [ 873.232289] xenbr0: port 2(vif3.0) entered disabled state Jun 30 04:19:17.633899 [ 900.196812] xenbr0: port 2(vif4.0) entered blocking state Jun 30 04:19:44.596477 [ 900.200845] xenbr0: port 2(vif4.0) entered disabled state Jun 30 04:19:44.608513 [ 900.206358] vif vif-4-0 vif4.0: entered allmulticast mode Jun 30 04:19:44.608513 [ 900.211954] vif vif-4-0 vif4.0: entered promiscuous mode Jun 30 04:19:44.620467 (XEN) d4v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 04:19:45.772548 (XEN) d4v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:19:45.784470 (XEN) d4v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:19:45.820462 (XEN) d4v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:19:45.844001 (XEN) d4v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:19:45.880469 [ 901.866369] xen-blkback: backend/vbd/4/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 04:19:46.277636 [ 901.935737] xen-blkback: backend/vbd/4/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 04:19:46.349664 (XEN) common/grant_table.c:1909:d4v0 Expanding d4 grant table from 1 to 2 frames Jun 30 04:19:46.361685 (XEN) common/grant_table.c:1909:d4v0 Expanding d4 grant table from 2 to 3 frames Jun 30 04:19:46.373595 [ 902.065941] vif vif-4-0 vif4.0: Guest Rx ready Jun 30 04:19:46.469700 [ 902.072827] xenbr0: port 2(vif4.0) entered blocking state Jun 30 04:19:46.481693 [ 902.079204] xenbr0: port 2(vif4.0) entered forwarding state Jun 30 04:19:46.481750 [ 923.943610] dwmmc_exynos 12200000.mmc: Unexpected interrupt latency Jun 30 04:20:08.349852 [ 926.132813] dwmmc_exynos 12200000.mmc: Unexpected interrupt latency Jun 30 04:20:10.537583 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 04:20:18.445785 [ 952.906874] xenbr0: port 2(vif4.0) entered disabled state Jun 30 04:20:37.316465 [ 953.223891] xenbr0: port 2(vif4.0) entered disabled state Jun 30 04:20:37.628646 [ 953.228469] vif vif-4-0 vif4.0 (unregistering): left allmulticast mode Jun 30 04:20:37.640554 [ 953.234601] vif vif-4-0 vif4.0 (unregistering): left promiscuous mode Jun 30 04:20:37.640554 [ 953.241054] xenbr0: port 2(vif4.0) entered disabled state Jun 30 04:20:37.652467 [ 980.156798] xenbr0: port 2(vif5.0) entered blocking state Jun 30 04:21:04.565816 [ 980.160831] xenbr0: port 2(vif5.0) entered disabled state Jun 30 04:21:04.565933 [ 980.166346] vif vif-5-0 vif5.0: entered allmulticast mode Jun 30 04:21:04.577694 [ 980.171927] vif vif-5-0 vif5.0: entered promiscuous mode Jun 30 04:21:04.577758 (XEN) d5v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 04:21:05.729785 (XEN) d5v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:21:05.753717 (XEN) d5v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:21:05.789694 (XEN) d5v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:21:05.813694 (XEN) d5v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:21:05.837733 [ 981.865759] xen-blkback: backend/vbd/5/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 04:21:06.269658 (XEN) common/grant_table.c:1909:d5v3 Expanding d5 grant table from 1 to 2 frames Jun 30 04:21:06.317619 (XEN) common/grant_table.c:1909:d5v3 Expanding d5 grant table from 2 to 3 frames Jun 30 04:21:06.317619 [ 981.925432] xen-blkback: backend/vbd/5/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 04:21:06.329737 [ 982.030863] vif vif-5-0 vif5.0: Guest Rx ready Jun 30 04:21:06.437742 [ 982.034198] xenbr0: port 2(vif5.0) entered blocking state Jun 30 04:21:06.437804 [ 982.041020] xenbr0: port 2(vif5.0) entered forwarding state Jun 30 04:21:06.449686 [ 999.092086] dwmmc_exynos 12200000.mmc: Unexpected interrupt latency Jun 30 04:21:23.493775 [ 1033.233850] xenbr0: port 2(vif5.0) entered disabled state Jun 30 04:21:57.637714 [ 1033.552543] xenbr0: port 2(vif5.0) entered disabled state Jun 30 04:21:57.949829 [ 1033.556979] vif vif-5-0 vif5.0 (unregistering): left allmulticast mode Jun 30 04:21:57.961856 [ 1033.563246] vif vif-5-0 vif5.0 (unregistering): left promiscuous mode Jun 30 04:21:57.961912 [ 1033.569744] xenbr0: port 2(vif5.0) entered disabled state Jun 30 04:21:57.973810 [ 1060.396117] xenbr0: port 2(vif6.0) entered blocking state Jun 30 04:22:24.796802 [ 1060.400174] xenbr0: port 2(vif6.0) entered disabled state Jun 30 04:22:24.808762 [ 1060.405694] vif vif-6-0 vif6.0: entered allmulticast mode Jun 30 04:22:24.808796 [ 1060.411273] vif vif-6-0 vif6.0: entered promiscuous mode Jun 30 04:22:24.820684 (XEN) d6v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 04:22:25.981620 (XEN) d6v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:22:25.993673 (XEN) d6v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:22:26.029801 (XEN) d6v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:22:26.053733 (XEN) d6v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:22:26.089688 [ 1062.028700] xen-blkback: backend/vbd/6/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 04:22:26.437714 [ 1062.087523] xen-blkback: backend/vbd/6/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 04:22:26.497698 (XEN) common/grant_table.c:1909:d6v1 Expanding d6 grant table from 1 to 2 frames Jun 30 04:22:26.509728 (XEN) common/grant_table.c:1909:d6v1 Expanding d6 grant table from 2 to 3 frames Jun 30 04:22:26.521731 [ 1062.202655] vif vif-6-0 vif6.0: Guest Rx ready Jun 30 04:22:26.605768 [ 1062.206456] xenbr0: port 2(vif6.0) entered blocking state Jun 30 04:22:26.605805 [ 1062.211212] xenbr0: port 2(vif6.0) entered forwarding state Jun 30 04:22:26.617648 [ 1112.337400] xenbr0: port 2(vif6.0) entered disabled state Jun 30 04:23:16.736508 [ 1112.622477] xenbr0: port 2(vif6.0) entered disabled state Jun 30 04:23:17.028534 [ 1112.626933] vif vif-6-0 vif6.0 (unregistering): left allmulticast mode Jun 30 04:23:17.028534 [ 1112.633186] vif vif-6-0 vif6.0 (unregistering): left promiscuous mode Jun 30 04:23:17.040497 [ 1112.639650] xenbr0: port 2(vif6.0) entered disabled state Jun 30 04:23:17.040497 [ 1139.865959] xenbr0: port 2(vif7.0) entered blocking state Jun 30 04:23:44.272623 [ 1139.869993] xenbr0: port 2(vif7.0) entered disabled state Jun 30 04:23:44.272623 [ 1139.875529] vif vif-7-0 vif7.0: entered allmulticast mode Jun 30 04:23:44.284585 [ 1139.881200] vif vif-7-0 vif7.0: entered promiscuous mode Jun 30 04:23:44.284585 (XEN) d7v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 04:23:45.437645 (XEN) d7v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:23:45.449609 (XEN) d7v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:23:45.485708 (XEN) d7v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:23:45.521686 (XEN) d7v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:23:45.545727 [ 1141.584692] xen-blkback: backend/vbd/7/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 04:23:45.993712 [ 1141.646221] xen-blkback: backend/vbd/7/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 04:23:46.053708 (XEN) common/grant_table.c:1909:d7v3 Expanding d7 grant table from 1 to 2 frames Jun 30 04:23:46.077756 (XEN) common/grant_table.c:1909:d7v3 Expanding d7 grant table from 2 to 3 frames Jun 30 04:23:46.089680 [ 1141.774195] vif vif-7-0 vif7.0: Guest Rx ready Jun 30 04:23:46.176520 [ 1141.778803] xenbr0: port 2(vif7.0) entered blocking state Jun 30 04:23:46.176520 [ 1141.788635] xenbr0: port 2(vif7.0) entered forwarding state Jun 30 04:23:46.188553 [ 1192.230223] xenbr0: port 2(vif7.0) entered disabled state Jun 30 04:24:36.637714 [ 1192.482851] xenbr0: port 2(vif7.0) entered disabled state Jun 30 04:24:36.893865 [ 1192.487894] vif vif-7-0 vif7.0 (unregistering): left allmulticast mode Jun 30 04:24:36.893969 [ 1192.493522] vif vif-7-0 vif7.0 (unregistering): left promiscuous mode Jun 30 04:24:36.894025 [ 1192.500022] xenbr0: port 2(vif7.0) entered disabled state Jun 30 04:24:36.905730 [ 1219.646198] xenbr0: port 2(vif8.0) entered blocking state Jun 30 04:25:04.048609 [ 1219.650232] xenbr0: port 2(vif8.0) entered disabled state Jun 30 04:25:04.048609 [ 1219.655764] vif vif-8-0 vif8.0: entered allmulticast mode Jun 30 04:25:04.060724 [ 1219.661348] vif vif-8-0 vif8.0: entered promiscuous mode Jun 30 04:25:04.060783 (XEN) d8v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 04:25:05.224545 (XEN) d8v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:25:05.236573 (XEN) d8v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:25:05.272558 (XEN) d8v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:25:05.296570 (XEN) d8v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:25:05.332547 [ 1221.291595] xen-blkback: backend/vbd/8/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 04:25:05.692590 (XEN) common/grant_table.c:1909:d8v1 Expanding d8 grant table from 1 to 2 frames Jun 30 04:25:05.740631 (XEN) common/grant_table.c:1909:d8v1 Expanding d8 grant table from 2 to 3 frames Jun 30 04:25:05.740631 [ 1221.349335] xen-blkback: backend/vbd/8/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 04:25:05.752550 [ 1221.458868] vif vif-8-0 vif8.0: Guest Rx ready Jun 30 04:25:05.860559 [ 1221.462807] xenbr0: port 2(vif8.0) entered blocking state Jun 30 04:25:05.860559 [ 1221.468714] xenbr0: port 2(vif8.0) entered forwarding state Jun 30 04:25:05.872514 [ 1272.145527] xenbr0: port 2(vif8.0) entered disabled state Jun 30 04:25:56.548504 [ 1272.432516] xenbr0: port 2(vif8.0) entered disabled state Jun 30 04:25:56.836641 [ 1272.437030] vif vif-8-0 vif8.0 (unregistering): left allmulticast mode Jun 30 04:25:56.836641 [ 1272.443196] vif vif-8-0 vif8.0 (unregistering): left promiscuous mode Jun 30 04:25:56.848762 [ 1272.449681] xenbr0: port 2(vif8.0) entered disabled state Jun 30 04:25:56.848847 [ 1299.366509] xenbr0: port 2(vif9.0) entered blocking state Jun 30 04:26:23.769749 [ 1299.370546] xenbr0: port 2(vif9.0) entered disabled state Jun 30 04:26:23.769823 [ 1299.376087] vif vif-9-0 vif9.0: entered allmulticast mode Jun 30 04:26:23.781681 [ 1299.381664] vif vif-9-0 vif9.0: entered promiscuous mode Jun 30 04:26:23.781737 (XEN) d9v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 04:26:24.945790 (XEN) d9v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:26:24.957855 (XEN) d9v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:26:24.993886 (XEN) d9v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:26:25.017847 (XEN) d9v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:26:25.053768 [ 1301.141741] xen-blkback: backend/vbd/9/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 04:26:25.545720 [ 1301.198657] xen-blkback: backend/vbd/9/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 04:26:25.605738 (XEN) common/grant_table.c:1909:d9v3 Expanding d9 grant table from 1 to 2 frames Jun 30 04:26:25.617798 (XEN) common/grant_table.c:1909:d9v3 Expanding d9 grant table from 2 to 3 frames Jun 30 04:26:25.629618 [ 1301.319445] vif vif-9-0 vif9.0: Guest Rx ready Jun 30 04:26:25.713631 [ 1301.323235] xenbr0: port 2(vif9.0) entered blocking state Jun 30 04:26:25.725649 [ 1301.331817] xenbr0: port 2(vif9.0) entered forwarding state Jun 30 04:26:25.737616 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 04:27:00.024662 [ 1352.038067] xenbr0: port 2(vif9.0) entered disabled state Jun 30 04:27:16.436515 [ 1352.325836] xenbr0: port 2(vif9.0) entered disabled state Jun 30 04:27:16.720523 [ 1352.341707] vif vif-9-0 vif9.0 (unregistering): left allmulticast mode Jun 30 04:27:16.744564 [ 1352.346927] vif vif-9-0 vif9.0 (unregistering): left promiscuous mode Jun 30 04:27:16.744564 [ 1352.353427] xenbr0: port 2(vif9.0) entered disabled state Jun 30 04:27:16.756511 [ 1379.316400] xenbr0: port 2(vif10.0) entered blocking state Jun 30 04:27:43.717817 [ 1379.320525] xenbr0: port 2(vif10.0) entered disabled state Jun 30 04:27:43.717900 [ 1379.326145] vif vif-10-0 vif10.0: entered allmulticast mode Jun 30 04:27:43.729733 [ 1379.331923] vif vif-10-0 vif10.0: entered promiscuous mode Jun 30 04:27:43.729796 (XEN) d10v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 04:27:44.893730 (XEN) d10v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:27:44.905718 (XEN) d10v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:27:44.941657 (XEN) d10v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:27:44.965682 (XEN) d10v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:27:45.001651 [ 1380.932686] xen-blkback: backend/vbd/10/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 04:27:45.337714 [ 1380.990619] xen-blkback: backend/vbd/10/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 04:27:45.397736 (XEN) common/grant_table.c:1909:d10v2 Expanding d10 grant table from 1 to 2 frames Jun 30 04:27:45.409748 (XEN) common/grant_table.c:1909:d10v2 Expanding d10 grant table from 2 to 3 frames Jun 30 04:27:45.409816 [ 1381.109068] vif vif-10-0 vif10.0: Guest Rx ready Jun 30 04:27:45.505720 [ 1381.113577] xenbr0: port 2(vif10.0) entered blocking state Jun 30 04:27:45.517739 [ 1381.121093] xenbr0: port 2(vif10.0) entered forwarding state Jun 30 04:27:45.517803 [ 1404.222204] dwmmc_exynos 12200000.mmc: Unexpected interrupt latency Jun 30 04:28:08.617782 [ 1431.664098] xenbr0: port 2(vif10.0) entered disabled state Jun 30 04:28:36.057693 [ 1431.982526] xenbr0: port 2(vif10.0) entered disabled state Jun 30 04:28:36.384526 [ 1431.992421] vif vif-10-0 vif10.0 (unregistering): left allmulticast mode Jun 30 04:28:36.396556 [ 1431.997775] vif vif-10-0 vif10.0 (unregistering): left promiscuous mode Jun 30 04:28:36.396622 [ 1432.004491] xenbr0: port 2(vif10.0) entered disabled state Jun 30 04:28:36.408584 [ 1458.951892] xenbr0: port 2(vif11.0) entered blocking state Jun 30 04:29:03.349804 [ 1458.956084] xenbr0: port 2(vif11.0) entered disabled state Jun 30 04:29:03.361737 [ 1458.961625] vif vif-11-0 vif11.0: entered allmulticast mode Jun 30 04:29:03.361800 [ 1458.967422] vif vif-11-0 vif11.0: entered promiscuous mode Jun 30 04:29:03.373668 (XEN) d11v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 04:29:04.525690 (XEN) d11v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:29:04.537702 (XEN) d11v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:29:04.573762 (XEN) d11v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:29:04.597732 (XEN) d11v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:29:04.633676 [ 1460.585913] xen-blkback: backend/vbd/11/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 04:29:04.993617 (XEN) common/grant_table.c:1909:d11v1 Expanding d11 grant table from 1 to 2 frames Jun 30 04:29:05.041747 (XEN) common/grant_table.c:1909:d11v1 Expanding d11 grant table from 2 to 3 frames Jun 30 04:29:05.041813 [ 1460.652485] xen-blkback: backend/vbd/11/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 04:29:05.065667 [ 1460.750556] vif vif-11-0 vif11.0: Guest Rx ready Jun 30 04:29:05.149715 [ 1460.754214] xenbr0: port 2(vif11.0) entered blocking state Jun 30 04:29:05.149777 [ 1460.759745] xenbr0: port 2(vif11.0) entered forwarding state Jun 30 04:29:05.161690 [ 1511.046146] xenbr0: port 2(vif11.0) entered disabled state Jun 30 04:29:55.448197 [ 1511.302705] xenbr0: port 2(vif11.0) entered disabled state Jun 30 04:29:55.700578 [ 1511.307208] vif vif-11-0 vif11.0 (unregistering): left allmulticast mode Jun 30 04:29:55.712594 [ 1511.313983] vif vif-11-0 vif11.0 (unregistering): left promiscuous mode Jun 30 04:29:55.712594 [ 1511.320422] xenbr0: port 2(vif11.0) entered disabled state Jun 30 04:29:55.724534 [ 1538.814418] xenbr0: port 2(vif12.0) entered blocking state Jun 30 04:30:23.217733 [ 1538.818545] xenbr0: port 2(vif12.0) entered disabled state Jun 30 04:30:23.217807 [ 1538.824164] vif vif-12-0 vif12.0: entered allmulticast mode Jun 30 04:30:23.229680 [ 1538.829910] vif vif-12-0 vif12.0: entered promiscuous mode Jun 30 04:30:23.229680 (XEN) d12v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 04:30:24.381728 (XEN) d12v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:30:24.393737 (XEN) d12v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:30:24.429702 (XEN) d12v2: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:30:24.453718 (XEN) d12v3: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 04:30:24.489690 [ 1540.510247] xen-blkback: backend/vbd/12/51713: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 04:30:24.909817 [ 1540.563202] xen-blkback: backend/vbd/12/51714: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 04:30:24.969772 (XEN) common/grant_table.c:1909:d12v3 Expanding d12 grant table from 1 to 2 frames Jun 30 04:30:24.981687 (XEN) common/grant_table.c:1909:d12v3 Expanding d12 grant table from 2 to 3 frames Jun 30 04:30:24.981748 [ 1540.696210] vif vif-12-0 vif12.0: Guest Rx ready Jun 30 04:30:25.089741 [ 1540.701073] xenbr0: port 2(vif12.0) entered blocking state Jun 30 04:30:25.101677 [ 1540.710502] xenbr0: port 2(vif12.0) entered forwarding state Jun 30 04:30:25.113612 [ 1587.667100] xenbr0: port 2(vif12.0) entered disabled state Jun 30 04:31:12.065746 [ 1587.862700] xenbr0: port 2(vif12.0) entered disabled state Jun 30 04:31:12.257730 [ 1587.867387] vif vif-12-0 vif12.0 (unregistering): left allmulticast mode Jun 30 04:31:12.269766 [ 1587.873720] vif vif-12-0 vif12.0 (unregistering): left promiscuous mode Jun 30 04:31:12.269831 [ 1587.880323] xenbr0: port 2(vif12.0) entered disabled state Jun 30 04:31:12.281736 Jun 30 04:31:31.658582 (XEN) *** Serial input to Xen (type 'CTRL-x' three times to switch input) Jun 30 04:31:31.681695 Jun 30 04:31:31.683075 Jun 30 04:31:32.648656 (XEN) '0' pressed -> dumping Dom0's registers Jun 30 04:31:32.665901 (XEN) *** Dumping Dom0 vcpu#0 state: *** Jun 30 04:31:32.665901 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Jun 30 04:31:32.667152 Not tainted ]---- Jun 30 04:31:32.677697 (XEN) CPU: 0 Jun 30 04:31:32.677771 (XEN) PC: c031be28 Jun 30 04:31:32.677797 (XEN) CPSR: 60070093 MODE:32-bit Guest SVC Jun 30 04:31:32.677871 (XEN) R0: 00000005 R1: 00000000 R2: 0027fd09 R3: c031be20 Jun 30 04:31:32.689688 (XEN) R4: c1b09d40 R5: c1d26f50 R6: c1b04e5c R7: c1b04e98 Jun 30 04:31:32.689780 (XEN) R8: 00000000 R9: 00000000 R10:000000ad R11:00000000 R12:c1d264a0 Jun 30 04:31:32.701733 (XEN) USR: SP: befc0960 LR: b6ea4685 Jun 30 04:31:32.701786 (XEN) SVC: SP: c1b01f78 LR: c114e078 SPSR:60070013 Jun 30 04:31:32.701839 (XEN) ABT: SP: c1d38b10 LR: c0300ec0 SPSR:600f0193 Jun 30 04:31:32.713692 (XEN) UND: SP: c1d38b20 LR: c0300fc0 SPSR:600f0093 Jun 30 04:31:32.713783 (XEN) IRQ: SP: c1d38b00 LR: c0300bc0 SPSR:60070193 Jun 30 04:31:32.725697 (XEN) FIQ: SP: c1d38b30 LR: c1d38b30 SPSR:00000000 Jun 30 04:31:32.725750 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Jun 30 04:31:32.725808 (XEN) Jun 30 04:31:32.737643 (XEN) SCTLR: 10c5387d Jun 30 04:31:32.737696 (XEN) TCR: 00000000 Jun 30 04:31:32.737774 (XEN) TTBR0: 0000000066f6806a Jun 30 04:31:32.737774 (XEN) TTBR1: 000000006020406a Jun 30 04:31:32.737774 (XEN) IFAR: b6e5aeb8, IFSR: 00000007 Jun 30 04:31:32.749678 (XEN) DFAR: 005b1318, DFSR: 0000081f Jun 30 04:31:32.749717 (XEN) Jun 30 04:31:32.749739 (XEN) VTCR_EL2: 80003558 Jun 30 04:31:32.749762 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 04:31:32.761686 (XEN) Jun 30 04:31:32.761711 (XEN) SCTLR_EL2: 30cd187f Jun 30 04:31:32.761734 (XEN) HCR_EL2: 007c663f Jun 30 04:31:32.761756 (XEN) TTBR0_EL2: 0000000041107000 Jun 30 04:31:32.761779 (XEN) Jun 30 04:31:32.761799 (XEN) ESR_EL2: 07e00000 Jun 30 04:31:32.773653 (XEN) HPFAR_EL2: 00104810 Jun 30 04:31:32.773679 (XEN) HDFAR: e0807f00 Jun 30 04:31:32.773701 (XEN) HIFAR: c0d9e04c Jun 30 04:31:32.773724 (XEN) Jun 30 04:31:32.773745 (XEN) Guest stack trace from sp=c1b01f78: Jun 30 04:31:32.785693 (XEN) Failed to convert stack to physical address Jun 30 04:31:32.785722 (XEN) *** Dumping Dom0 vcpu#1 state: *** Jun 30 04:31:32.785746 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Not tainted ]---- Jun 30 04:31:32.797656 (XEN) CPU: 0 Jun 30 04:31:32.797682 (XEN) PC: c031be28 Jun 30 04:31:32.797704 (XEN) CPSR: 60030093 MODE:32-bit Guest SVC Jun 30 04:31:32.797728 (XEN) R0: 00000005 R1: 00000000 R2: 001b9741 R3: c031be20 Jun 30 04:31:32.809663 (XEN) R4: c2110880 R5: c1d26f50 R6: c1b04e5c R7: c1b04e98 Jun 30 04:31:32.809697 (XEN) R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:c1d264a0 Jun 30 04:31:32.821690 (XEN) USR: SP: beaa5938 LR: b6bab853 Jun 30 04:31:32.821718 (XEN) SVC: SP: e08d9fa0 LR: c114e078 SPSR:60030013 Jun 30 04:31:32.821750 (XEN) ABT: SP: c1d38b50 LR: c0301040 SPSR:600b0193 Jun 30 04:31:32.833641 (XEN) UND: SP: c1d38b60 LR: c0300fc0 SPSR:60030093 Jun 30 04:31:32.833670 (XEN) IRQ: SP: c1d38b40 LR: c0300bc0 SPSR:60030193 Jun 30 04:31:32.845657 (XEN) FIQ: SP: c1d38b70 LR: c1d38b70 SPSR:00000000 Jun 30 04:31:32.845689 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Jun 30 04:31:32.857668 (XEN) Jun 30 04:31:32.857693 (XEN) SCTLR: 10c5387d Jun 30 04:31:32.857716 (XEN) TCR: 00000000 Jun 30 04:31:32.857739 (XEN) TTBR0: 0000000066ce806a Jun 30 04:31:32.857761 (XEN) TTBR1: 000000006020406a Jun 30 04:31:32.869630 (XEN) IFAR: b6e69eb8, IFSR: 00000007 Jun 30 04:31:32.869658 (XEN) DFAR: b6b58f18, DFSR: 00000017 Jun 30 04:31:32.869682 (XEN) Jun 30 04:31:32.869703 (XEN) VTCR_EL2: 80003558 Jun 30 04:31:32.869725 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 04:31:32.881647 (XEN) Jun 30 04:31:32.881672 (XEN) SCTLR_EL2: 30cd187f Jun 30 04:31:32.881695 (XEN) HCR_EL2: 007c663f Jun 30 04:31:32.881717 (XEN) TTBR0_EL2: 0000000041107000 Jun 30 04:31:32.881740 (XEN) Jun 30 04:31:32.881761 (XEN) ESR_EL2: 07e00000 Jun 30 04:31:32.893670 (XEN) HPFAR_EL2: 00104810 Jun 30 04:31:32.893698 (XEN) HDFAR: e0807f00 Jun 30 04:31:32.893721 (XEN) HIFAR: c0d9e04c Jun 30 04:31:32.893743 (XEN) Jun 30 04:31:32.893781 (XEN) Guest stack trace from sp=e08d9fa0: Jun 30 04:31:32.905640 (XEN) Failed to convert stack to physical address Jun 30 04:31:32.905670 Jun 30 04:31:34.647537 (XEN) 'H' pressed -> dumping heap info (now = 1615647031666) Jun 30 04:31:34.669775 (XEN) heap[node=0][zone=0] Jun 30 04:31:34.670874 -> 16278 pages Jun 30 04:31:34.681569 (XEN) heap[node=0][zone=1] -> 0 pages Jun 30 04:31:34.681682 (XEN) heap[node=0][zone=2] -> 0 pages Jun 30 04:31:34.681724 (XEN) heap[node=0][zone=3] -> 0 pages Jun 30 04:31:34.681770 (XEN) heap[node=0][zone=4] -> 0 pages Jun 30 04:31:34.693679 (XEN) heap[node=0][zone=5] -> 0 pages Jun 30 04:31:34.693679 (XEN) heap[node=0][zone=6] -> 0 pages Jun 30 04:31:34.693679 (XEN) heap[node=0][zone=7] -> 0 pages Jun 30 04:31:34.705667 (XEN) heap[node=0][zone=8] -> 0 pages Jun 30 04:31:34.705667 (XEN) heap[node=0][zone=9] -> 0 pages Jun 30 04:31:34.705667 (XEN) heap[node=0][zone=10] -> 0 pages Jun 30 04:31:34.705667 (XEN) heap[node=0][zone=11] -> 0 pages Jun 30 04:31:34.717727 (XEN) heap[node=0][zone=12] -> 0 pages Jun 30 04:31:34.717766 (XEN) heap[node=0][zone=13] -> 0 pages Jun 30 04:31:34.717790 (XEN) heap[node=0][zone=14] -> 0 pages Jun 30 04:31:34.729674 (XEN) heap[node=0][zone=15] -> 0 pages Jun 30 04:31:34.729705 (XEN) heap[node=0][zone=16] -> 0 pages Jun 30 04:31:34.729730 (XEN) heap[node=0][zone=17] -> 0 pages Jun 30 04:31:34.729754 (XEN) heap[node=0][zone=18] -> 0 pages Jun 30 04:31:34.741689 (XEN) heap[node=0][zone=19] -> 130833 pages Jun 30 04:31:34.741721 (XEN) heap[node=0][zone=20] -> 241608 pages Jun 30 04:31:34.741746 (XEN) heap[node=0][zone=21] -> 0 pages Jun 30 04:31:34.753693 (XEN) heap[node=0][zone=22] -> 0 pages Jun 30 04:31:34.753724 (XEN) heap[node=0][zone=23] -> 0 pages Jun 30 04:31:34.753748 (XEN) heap[node=0][zone=24] -> 0 pages Jun 30 04:31:34.765699 (XEN) heap[node=0][zone=25] -> 0 pages Jun 30 04:31:34.765731 (XEN) heap[node=0][zone=26] -> 0 pages Jun 30 04:31:34.765755 (XEN) heap[node=0][zone=27] -> 0 pages Jun 30 04:31:34.765779 (XEN) heap[node=0][zone=28] -> 0 pages Jun 30 04:31:34.777623 Jun 30 04:31:36.736082 Jun 30 04:31:38.454354 Jun 30 04:31:38.686765 Jun 30 04:31:40.460472 Jun 30 04:31:40.662528 (XEN) Dumping timer queues: Jun 30 04:31:40.685725 (XEN) CPU00: Jun 30 04:31:40.685755 (XEN) ex= 3295us timer=43fdc968 cb=vtimer.c#virt_timer_expired(43fdc960) Jun 30 04:31:40.685786 (XEN) CPU Jun 30 04:31:40.687085 01: Jun 30 04:31:40.697696 (XEN) ex= 102416us timer=43fef968 cb=vtimer.c#virt_timer_expired(43fef960) Jun 30 04:31:40.697696 Jun 30 04:31:42.682707 Jun 30 04:31:44.469239 Jun 30 04:31:44.676310 (XEN) 'd' pressed -> dumping registers Jun 30 04:31:44.697773 (XEN) Jun 30 04:31:44.697802 (XEN) *** Dumping CPU0 host state: *** Jun 30 04:31:44.697827 (XEN) ----[ Xen-4.19-unstable arm32 debug=y N Jun 30 04:31:44.699148 ot tainted ]---- Jun 30 04:31:44.709809 (XEN) CPU: 0 Jun 30 04:31:44.709838 (XEN) PC: 0025ef7c domain.c#idle_loop+0x130/0x1ac Jun 30 04:31:44.709866 (XEN) CPSR: 6003005a MODE:Hypervisor Jun 30 04:31:44.709891 (XEN) R0: 00000000 R1: 0029f300 R2: 00000000 R3: 00000000 Jun 30 04:31:44.721894 (XEN) R4: 00000000 R5: 002f80e0 R6: 0032b324 R7: 00000001 Jun 30 04:31:44.721926 (XEN) R8: 0032b104 R9: 00000000 R10:40e00000 R11:4003ff54 R12:fffffffc Jun 30 04:31:44.733747 (XEN) HYP: SP: 4003ff44 LR: 00225cb8 Jun 30 04:31:44.733780 (XEN) Jun 30 04:31:44.733802 (XEN) VTCR_EL2: 80003558 Jun 30 04:31:44.733825 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 04:31:44.745761 (XEN) Jun 30 04:31:44.745791 (XEN) SCTLR_EL2: 30cd187f Jun 30 04:31:44.745815 (XEN) HCR_EL2: 007c663f Jun 30 04:31:44.745838 (XEN) TTBR0_EL2: 0000000041107000 Jun 30 04:31:44.745861 (XEN) Jun 30 04:31:44.745882 (XEN) ESR_EL2: 07e00000 Jun 30 04:31:44.757748 (XEN) HPFAR_EL2: 00104810 Jun 30 04:31:44.757780 (XEN) HDFAR: e0807f00 Jun 30 04:31:44.757803 (XEN) HIFAR: c0d9e04c Jun 30 04:31:44.757826 (XEN) Jun 30 04:31:44.757847 (XEN) Xen stack trace from sp=4003ff44: Jun 30 04:31:44.769721 (XEN) 07e00000 00295014 002919ac 4003ff4c 00267818 00000000 00000000 00000000 Jun 30 04:31:44.769756 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 04:31:44.781695 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 04:31:44.781729 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 04:31:44.793699 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 04:31:44.805674 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 04:31:44.805708 (XEN) Xen call trace: Jun 30 04:31:44.805731 (XEN) [<0025ef7c>] domain.c#idle_loop+0x130/0x1ac (PC) Jun 30 04:31:44.817672 (XEN) [<00225cb8>] rcu_needs_cpu+0x40/0x60 (LR) Jun 30 04:31:44.817701 (XEN) [<00267818>] arch_get_xen_caps+0/0x90 Jun 30 04:31:44.817726 (XEN) Jun 30 04:31:44.829690 (XEN) *** Dumping CPU1 host state: *** Jun 30 04:31:44.829722 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Not tainted ]---- Jun 30 04:31:44.829749 (XEN) CPU: 1 Jun 30 04:31:44.829770 (XEN) PC: 0025ef7c domain.c#idle_loop+0x130/0x1ac Jun 30 04:31:44.841682 (XEN) CPSR: 6007005a MODE:Hypervisor Jun 30 04:31:44.841714 (XEN) R0: 00000000 R1: 0029f300 R2: 3fd0e000 R3: 00000000 Jun 30 04:31:44.853681 (XEN) R4: 00000001 R5: 002f80e0 R6: 0032b324 R7: 00000002 Jun 30 04:31:44.853715 (XEN) R8: 0032b104 R9: 00000001 R10:40e00000 R11:4000ff54 R12:fffffffc Jun 30 04:31:44.865666 (XEN) HYP: SP: 4000ff44 LR: 00225cb8 Jun 30 04:31:44.865697 (XEN) Jun 30 04:31:44.865719 (XEN) VTCR_EL2: 80003558 Jun 30 04:31:44.865741 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 04:31:44.865764 (XEN) Jun 30 04:31:44.865784 (XEN) SCTLR_EL2: 30cd187f Jun 30 04:31:44.877685 (XEN) HCR_EL2: 007c663f Jun 30 04:31:44.877717 (XEN) TTBR0_EL2: 00000000ba004000 Jun 30 04:31:44.877741 (XEN) Jun 30 04:31:44.877762 (XEN) ESR_EL2: 07e00000 Jun 30 04:31:44.877784 (XEN) HPFAR_EL2: 00104810 Jun 30 04:31:44.889697 (XEN) HDFAR: e0807f00 Jun 30 04:31:44.889727 (XEN) HIFAR: c0ac9320 Jun 30 04:31:44.889751 (XEN) Jun 30 04:31:44.889771 (XEN) Xen stack trace from sp=4000ff44: Jun 30 04:31:44.889795 (XEN) 07e00000 002f9290 00000001 4000ff3c 002680f4 00000000 00000000 00000000 Jun 30 04:31:44.901695 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 04:31:44.913680 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 04:31:44.913714 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 04:31:44.925701 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 04:31:44.925735 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 04:31:44.937680 (XEN) Xen call trace: Jun 30 04:31:44.937710 (XEN) [<0025ef7c>] domain.c#idle_loop+0x130/0x1ac (PC) Jun 30 04:31:44.937736 (XEN) [<00225cb8>] rcu_needs_cpu+0x40/0x60 (LR) Jun 30 04:31:44.949663 (XEN) [<002680f4>] start_secondary+0x204/0x20c Jun 30 04:31:44.949696 (XEN) Jun 30 04:31:44.949718 Jun 30 04:31:46.696314 (XEN) 'e' pressed -> dumping event-channel info Jun 30 04:31:46.713792 (XEN) Event channel information for domain 0: Jun 30 04:31:46.713792 (XEN) Polling vCPUs: {} Jun 30 04:31:46.713792 (XEN) port Jun 30 04:31:46.715050 [p/m/s] Jun 30 04:31:46.725598 (XEN) 1 [0/0/ - ]: s=3 n=1 x=0 d=0 p=4 Jun 30 04:31:46.725598 (XEN) 2 [0/0/ - ]: s=5 n=0 x=0 v=2 Jun 30 04:31:46.725598 (XEN) 3 [0/0/ - ]: s=5 n=1 x=0 v=3 Jun 30 04:31:46.737565 (XEN) 4 [0/0/ - ]: s=3 n=0 x=0 d=0 p=1 Jun 30 04:31:46.737565 Jun 30 04:31:48.721244 (XEN) gnttab_usage_print_all [ key 'g' pressed Jun 30 04:31:48.737736 (XEN) -------- active -------- -------- shared -------- Jun 30 04:31:48.737885 (XEN) [ref] localdo Jun 30 04:31:48.740205 m mfn pin localdom gmfn flags Jun 30 04:31:48.745700 (XEN) grant-table for remote d0 (v1) Jun 30 04:31:48.745779 (XEN) 1 frames (64 max), 4 maptrack frames (1024 max) Jun 30 04:31:48.757716 (XEN) no active grant table entries Jun 30 04:31:48.757813 (XEN) gnttab_usage_print_all ] done Jun 30 04:31:48.757813 Jun 30 04:31:50.725649 Jun 30 04:31:52.482984 Jun 30 04:31:52.743339 (XEN) Physical memory information: Jun 30 04:31:52.761784 (XEN) Xen heap: 65112kB free Jun 30 04:31:52.761871 (XEN) heap[19]: Jun 30 04:31:52.763371 523332kB free Jun 30 04:31:52.773664 (XEN) heap[20]: 966432kB free Jun 30 04:31:52.773694 (XEN) Dom heap: 1489764kB free Jun 30 04:31:52.773718 Jun 30 04:31:54.726382 Jun 30 04:31:56.493527 Jun 30 04:31:56.733118 (XEN) sched_smt_power_savings: disabled Jun 30 04:31:56.749801 (XEN) NOW=1637723116875 Jun 30 04:31:56.749867 (XEN) Online Cpus: 0-1 Jun 30 04:31:56.749905 (XEN) Cpupool 0: Jun 30 04:31:56.749905 (XEN) Cpus: 0-1 Jun 30 04:31:56.749905 (XEN) Sched Jun 30 04:31:56.752170 uling granularity: cpu, 1 CPU per sched-resource Jun 30 04:31:56.761646 (XEN) Scheduler: SMP Credit Scheduler rev2 (credit2) Jun 30 04:31:56.761646 (XEN) Active queues: 1 Jun 30 04:31:56.761646 (XEN) default-weight = 256 Jun 30 04:31:56.773642 (XEN) Runqueue 0: Jun 30 04:31:56.773642 (XEN) ncpus = 2 Jun 30 04:31:56.773642 (XEN) cpus = 0-1 Jun 30 04:31:56.773642 (XEN) max_weight = 256 Jun 30 04:31:56.785676 (XEN) pick_bias = 0 Jun 30 04:31:56.785676 (XEN) instload = 0 Jun 30 04:31:56.785676 (XEN) aveload = 1351 (~0%) Jun 30 04:31:56.785676 (XEN) idlers: 2 Jun 30 04:31:56.785676 (XEN) tickled: 0 Jun 30 04:31:56.797659 (XEN) fully idle cores: 2 Jun 30 04:31:56.797659 (XEN) Domain info: Jun 30 04:31:56.797659 (XEN) Domain: 0 w 256 c 0 v 2 Jun 30 04:31:56.797659 (XEN) 1: [0.0] flags=0 cpu=1 credit=4010642 [w=256] load=1187 (~0%) Jun 30 04:31:56.805647 (XEN) 2: [0.1] flags=0 cpu=1 credit=9184831 [w=256] load=278 (~0%) Jun 30 04:31:56.805647 (XEN) Runqueue 0: Jun 30 04:31:56.817777 (XEN) CPU[00] runq=0, sibling={0}, core={0-1} Jun 30 04:31:56.817846 (XEN) CPU[01] runq=0, sibling={1}, core={0-1} Jun 30 04:31:56.817892 (XEN) RUNQ: Jun 30 04:31:56.817931 (XEN) 0: [0.0] flags=0 cpu=1 credit=4010642 [w=256] load=1169 (~0%) Jun 30 04:31:56.829781 (XEN) CPUs info: Jun 30 04:31:56.829835 (XEN) CPU[00] current=d[IDLE]v0, curr=d[IDLE]v0, prev=NULL Jun 30 04:31:56.829883 (XEN) CPU[01] current=d[IDLE]v1, curr=d[IDLE]v1, prev=NULL Jun 30 04:31:56.841714 Jun 30 04:31:58.716696 Jun 30 04:32:00.503015 Jun 30 04:32:00.722481 (XEN) Synced stime skew: max=125ns avg=125ns samples=1 current=125ns Jun 30 04:32:00.737776 (XEN) Synced cycles skew: max=1 avg=1 samples=1 current=1 Jun 30 04:32:00.737839 Jun 30 04:32:00.739998 Jun 30 04:32:02.735485 Jun 30 04:32:04.507703 Jun 30 04:32:04.751831 Jun 30 04:32:06.513654 Jun 30 04:32:06.753826 Jun 30 04:32:08.519756 Jun 30 04:32:18.753319 (XEN) 'q' pressed -> dumping domain info (now = 1659747345625) Jun 30 04:32:18.773841 (XEN) General information for domain 0: Jun 30 04:32:18.773902 (XEN) refcnt=3 dying=0 paus Jun 30 04:32:18.776255 e_count=0 Jun 30 04:32:18.785678 (XEN) nr_pages=131072 xenheap_pages=2 dirty_cpus={} max_pages=131072 Jun 30 04:32:18.785744 (XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=00000020 Jun 30 04:32:18.797803 (XEN) p2m mappings for domain 0 (vmid 1): Jun 30 04:32:18.797863 (XEN) 1G mappings: 0 (shattered 0) Jun 30 04:32:18.797908 (XEN) 2M mappings: 237 (shattered 19) Jun 30 04:32:18.809770 (XEN) 4K mappings: 4559 Jun 30 04:32:18.809827 (XEN) Rangesets belonging to domain 0: Jun 30 04:32:18.809873 (XEN) Interrupts { 32-72, 74, 77-79, 82-84, 86, 88-100, 103-104, 107-110, 114, 116-120, 123, 126-128, 138, 144, 146-147, 149-151, 156 } Jun 30 04:32:18.821757 (XEN) I/O Memory { 2020-2050, 3810-3811, 3830-3831, 3860-3861, 10000-10001, 10010-10045, 10050-10055, 10060-10061, 101b0-101b1, 101d0-101d1, 101e0-101e1, 10440-10441, 10800-10801, 10830-10831, 10850-10851, 10a60-10a61, 10d10-10d11, 11000-11010, 11200-11201, 11210-11211, 11400-11401, 11800-11805, 11c00-11c01, 11c10-11c11, 11d40-11d41, 11f20-11f21, 12000-12010, 12100-12101, 12110-12111, 12120-12121, 12130-12131, 12170-12171, 121a0-121a1, 121b0-121b1, 121d0-121d1, 12200-12201, 12210-12211, 12220-12221, 12230-12231, 12250-12251, 122f0-122f1, 12c00-12c01, 12c10-12c11, 12c30-12c31, 12c60-12c61, 12c70-12c71, 12c80-12c81, 12c90-12c91, 12ca0-12ca1, 12cb0-12cb1, 12cc0-12cc1, 12cd0-12cd1, 12ce0-12ce1, 12d10-12d11, 12d20-12d21, 12d30-12d31, 12d40-12d41, 12d60-12d61, 12d70-12d71, 12dd0-12dd1, 13260-13261, 13270-13271, 13280-13281, 13290-13291, 132a0-132a1, 132b0-132b1, 132c0-132c1, 132d0-132d1, 132e0-132e1, 132f0-132f1, 13400-13401, 13c40-13c41, 13c50-13c51, 13e00-13e01, 13e10-13e11, 13e20-13e21, 13e30-13e31, 13e80-13e81, 13e90-13e91, 13ea0-13ea1, 13eb0-13eb1, 14400-14440, 14450-14460, 14500-14510, 14530-145a0, 145b0-145b1, 14640-14641, 14650-14651 } Jun 30 04:32:18.917732 (XEN) NODE affinity for domain 0: [0] Jun 30 04:32:18.929701 (XEN) VCPU information and callbacks for domain 0: Jun 30 04:32:18.929763 (XEN) UNIT0 affinities: hard={0-1} soft={0-1} Jun 30 04:32:18.929810 (XEN) VCPU0: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Jun 30 04:32:18.941696 (XEN) pause_count=0 pause_flags=1 Jun 30 04:32:18.941747 (XEN) GICH_LRs (vcpu 0) mask=0 Jun 30 04:32:18.941791 (XEN) VCPU_LR[0]=0 Jun 30 04:32:18.953689 (XEN) VCPU_LR[1]=0 Jun 30 04:32:18.953737 (XEN) VCPU_LR[2]=0 Jun 30 04:32:18.953778 (XEN) VCPU_LR[3]=0 Jun 30 04:32:18.953826 (XEN) No periodic timer Jun 30 04:32:18.953869 (XEN) UNIT1 affinities: hard={0-1} soft={0-1} Jun 30 04:32:18.965688 (XEN) VCPU1: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Jun 30 04:32:18.965748 (XEN) pause_count=0 pause_flags=1 Jun 30 04:32:18.965792 (XEN) GICH_LRs (vcpu 1) mask=0 Jun 30 04:32:18.977697 (XEN) VCPU_LR[0]=0 Jun 30 04:32:18.977745 (XEN) VCPU_LR[1]=0 Jun 30 04:32:18.977796 (XEN) VCPU_LR[2]=0 Jun 30 04:32:18.977837 (XEN) VCPU_LR[3]=0 Jun 30 04:32:18.977878 (XEN) No periodic timer Jun 30 04:32:18.989672 (XEN) Notifying guest 0:0 (virq 1, port 0) Jun 30 04:32:18.989724 (XEN) Notifying guest 0:1 (virq 1, port 0) Jun 30 04:32:18.989769 Jun 30 04:32:30.773111 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 30 04:32:30.796768 Jun 30 04:32:30.796803 arndale-metrocentre login: Jun 30 04:32:30.798639 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 04:33:41.021716 [ 1755.057323] sd 0:0:0:0: [sda] Synchronizing SCSI cache Jun 30 04:33:59.449883 [ 1755.083893] wake enabled for irq 119 (gpx1-4) Jun 30 04:33:59.473794 [ 1755.086889] wake enabled for irq 120 (gpx1-5) Jun 30 04:33:59.485880 [ 1755.091316] wake enabled for irq 121 (gpx1-6) Jun 30 04:33:59.485941 [ 1755.095770] wake enabled for irq 122 (gpx1-7) Jun 30 04:33:59.497797 [ 1755.100169] wake enabled for irq 123 (gpx2-0) Jun 30 04:33:59.497858 [ 1755.104609] wake enabled for irq 124 (gpx2-1) Jun 30 04:33:59.497905 [ 1755.109454] reboot: Rest Jun 30 04:33:59.833849 Jun 30 04:33:59.833919 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 04:33:59.845757 Jun 30 04:33:59.845805 CPU: Exynos5250@1000MHz Jun 30 04:33:59.845850 Jun 30 04:33:59.845887 Board: Arndale Jun 30 04:33:59.845928 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 04:33:59.857698 ready Jun 30 04:33:59.857755 DRAM: 2 GiB Jun 30 04:33:59.857777 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 04:33:59.869736 trace: enabled Jun 30 04:33:59.905687 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 04:34:00.265682 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 04:34:00.325635 In: serial Jun 30 04:34:00.325666 Out: serial Jun 30 04:34:00.325689 Err: serial Jun 30 04:34:00.325711 SCSI: ARNDALE SCSI INIT Jun 30 04:34:00.337767 Target spinup took 0 ms. Jun 30 04:34:00.337798 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 04:34:00.349890 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 04:34:00.349925 Net: Net Initialization Skipped Jun 30 04:34:00.349950 No ethernet found. Jun 30 04:34:00.349973 Hostname: arndale-metrocentre Jun 30 04:34:00.361836 Hit any key to stop autoboot: 2  1  0 Jun 30 04:34:02.273623 (Re)start USB... Jun 30 04:34:02.285621 USB0: USB EHCI 1.00 Jun 30 04:34:02.285677 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 04:34:07.881788 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 04:34:07.893637 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 04:34:08.329721 Waiting for Ethernet connection... done. Jun 30 04:34:09.937628 BOOTP broadcast 1 Jun 30 04:34:09.937679 BOOTP broadcast 2 Jun 30 04:34:11.041744 DHCP client bound to address 10.149.64.44 (1153 ms) Jun 30 04:34:11.041815 Using asx0 device Jun 30 04:34:11.041858 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 04:34:11.053728 Filename 'pxelinux.0'. Jun 30 04:34:11.053819 Load address: 0x43e00000 Jun 30 04:34:11.053864 Loading: *### Jun 30 04:34:11.065683 2.4 MiB/s Jun 30 04:34:11.077739 done Jun 30 04:34:11.077791 Bytes transferred = 42430 (a5be hex) Jun 30 04:34:11.077837 missing environment variable: pxeuuid Jun 30 04:34:11.077881 Retrieving file: pxelinux.cfg/0A95402C Jun 30 04:34:11.077925 Using asx0 device Jun 30 04:34:11.089758 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 04:34:11.089821 Filename 'pxelinux.cfg/0A95402C'. Jun 30 04:34:11.089867 Load address: 0x51000000 Jun 30 04:34:11.089909 Loading: *# Jun 30 04:34:11.101724 358.4 KiB/s Jun 30 04:34:11.101772 done Jun 30 04:34:11.101812 Bytes transferred = 734 (2de hex) Jun 30 04:34:11.101856 Config file found Jun 30 04:34:11.101897 Ignoring unknown command: serial Jun 30 04:34:11.101940 1: ^Overwrite Jun 30 04:34:11.101980 Retrieving file: /osstest/tmp//arndale-metrocentre--initrd.gz Jun 30 04:34:11.113765 Using asx0 device Jun 30 04:34:11.113820 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 04:34:11.125739 Filename '/osstest/tmp//arndale-metrocentre--initrd.gz'. Jun 30 04:34:11.125801 Load address: 0x43300000 Jun 30 04:34:11.125844 Loading: *################################################################# Jun 30 04:34:11.453726 ################################################################# Jun 30 04:34:11.777673 ################################################################# Jun 30 04:34:12.101598 ################################################################# Jun 30 04:34:12.425689 ################################################################# Jun 30 04:34:12.749671 ################################################################# Jun 30 04:34:13.073678 ################################################################# Jun 30 04:34:13.397590 ################################################################# Jun 30 04:34:13.721625 ################################################################# Jun 30 04:34:14.045595 ################################################################# Jun 30 04:34:14.369581 ################################################################# Jun 30 04:34:14.693683 ################################################################# Jun 30 04:34:15.018515 ################################################################# Jun 30 04:34:15.341697 ################################################################# Jun 30 04:34:15.665710 ################################################################# Jun 30 04:34:15.989706 ################################################################# Jun 30 04:34:16.313679 ################################################################# Jun 30 04:34:16.637680 ################################################################# Jun 30 04:34:16.889686 ################################################################# Jun 30 04:34:17.141689 ################################################################# Jun 30 04:34:17.393703 ################################################################# Jun 30 04:34:17.645671 ################################################################# Jun 30 04:34:17.897675 ################################################################# Jun 30 04:34:18.173696 ################################################################# Jun 30 04:34:18.473697 ################################################################# Jun 30 04:34:18.797686 ################################################################# Jun 30 04:34:19.121592 ################################################################# Jun 30 04:34:19.445776 ###################################### Jun 30 04:34:19.625698 2.8 MiB/s Jun 30 04:34:19.625786 done Jun 30 04:34:19.625834 Bytes transferred = 26310350 (19176ce hex) Jun 30 04:34:19.637721 Retrieving file: /osstest/debian-installer/armhf/2024-03-26-bookworm/linux Jun 30 04:34:19.649744 Using asx0 device Jun 30 04:34:19.649799 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 04:34:19.649849 Filename '/osstest/debian-installer/armhf/2024-03-26-bookworm/linux'. Jun 30 04:34:19.661730 Load address: 0x42000000 Jun 30 04:34:19.661786 Loading: *################################################################# Jun 30 04:34:19.985586 ################################################################# Jun 30 04:34:20.309767 ################################################################# Jun 30 04:34:20.645674 ################################################################# Jun 30 04:34:20.969646 ################################################################# Jun 30 04:34:21.293718 ############################################# Jun 30 04:34:21.521643 2.7 MiB/s Jun 30 04:34:21.521707 done Jun 30 04:34:21.521749 Bytes transferred = 5423616 (52c200 hex) Jun 30 04:34:21.521794 append: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-metrocentre url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=43964 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-metrocentre--initrd.gz --- console=ttySAC2,115200n8 Jun 30 04:34:21.569811 Retrieving file: /osstest/debian-installer/armhf/2024-03-26-bookworm/dtbs/exynos5250-arndale.dtb Jun 30 04:34:21.581714 Using asx0 device Jun 30 04:34:21.581714 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 04:34:21.581714 Filename '/osstest/debian-installer/armhf/2024-03-26-bookworm/dtbs/exynos5250-arndale.dtb'. Jun 30 04:34:21.593769 Load address: 0x43000000 Jun 30 04:34:21.593824 Loading: *#### Jun 30 04:34:21.617757 2.5 MiB/s Jun 30 04:34:21.617811 done Jun 30 04:34:21.617850 Bytes transferred = 46686 (b65e hex) Jun 30 04:34:21.617894 Kernel image @ 0x42000000 [ 0x000000 - 0x52c200 ] Jun 30 04:34:21.617939 ## Flattened Device Tree blob at 43000000 Jun 30 04:34:21.629709 Booting using the fdt blob at 0x43000000 Jun 30 04:34:21.629709 Loading Ramdisk to 4e6e8000, end 4ffff6ce ... OK Jun 30 04:34:22.049679 Loading Device Tree to 4e6d9000, end 4e6e765d ... OK Jun 30 04:34:22.061720 Jun 30 04:34:22.061771 Starting kernel ...(fake run for tracing) Jun 30 04:34:22.073697 Jun 30 04:34:22.073748 Jun 30 04:34:22.073787 Starting kernel ... Jun 30 04:34:22.073828 Jun 30 04:34:22.073865 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 04:34:28.181801 [ 0.000000] Linux version 6.1.0-18-armmp (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.76-1 (2024-02-01) Jun 30 04:34:28.193767 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 30 04:34:28.205753 [ 0.000000] CPU: div instructions available: patching division code Jun 30 04:34:28.205817 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 04:34:28.217732 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 04:34:28.217803 [ 0.000000] Memory policy: Data cache writealloc Jun 30 04:34:28.229751 [ 0.000000] efi: UEFI not found. Jun 30 04:34:28.229810 [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 Jun 30 04:34:28.241741 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 04:34:28.241803 [ 0.000000] Zone ranges: Jun 30 04:34:28.241846 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Jun 30 04:34:28.253752 [ 0.000000] Normal empty Jun 30 04:34:28.253810 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Jun 30 04:34:28.253860 [ 0.000000] Movable zone start for each node Jun 30 04:34:28.265749 [ 0.000000] Early memory node ranges Jun 30 04:34:28.265807 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 04:34:28.265856 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 04:34:28.277781 [ 0.000000] percpu: Embedded 18 pages/cpu s41620 r8192 d23916 u73728 Jun 30 04:34:28.289753 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Jun 30 04:34:28.289819 [ 0.000000] Kernel command line: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-metrocentre url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=43964 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-metrocentre--initrd.gz --- console=ttySAC2,115200n8 Jun 30 04:34:28.337777 [ 0.000000] Unknown kernel command line parameters "preseed --- vga=normal auto=true hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=43964 domain=test-lab.xenproject.org", will be passed to user space. Jun 30 04:34:28.373767 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Jun 30 04:34:28.385786 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 04:34:28.385855 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Jun 30 04:34:28.397796 [ 0.000000] Memory: 2015996K/2097152K available (11264K kernel code, 1696K rwdata, 3716K rodata, 2048K init, 378K bss, 64772K reserved, 16384K cma-reserved, 1294332K highmem) Jun 30 04:34:28.409790 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 04:34:28.421760 [ 0.000000] ftrace: allocating 39582 entries in 117 pages Jun 30 04:34:28.421821 [ 0.000000] ftrace: allocated 116 pages with 4 groups Jun 30 04:34:28.433759 [ 0.000000] trace event string verifier disabled Jun 30 04:34:28.433819 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 04:34:28.433866 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Jun 30 04:34:28.445778 [ 0.000000] Rude variant of Tasks RCU enabled. Jun 30 04:34:28.445838 [ 0.000000] Tracing variant of Tasks RCU enabled. Jun 30 04:34:28.457718 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Jun 30 04:34:28.457775 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 04:34:28.469754 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 04:34:28.469816 [ 0.000000] GIC: Using split EOI/Deactivate mode Jun 30 04:34:28.481728 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 04:34:28.481792 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 04:34:28.493816 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Jun 30 04:34:28.493897 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Jun 30 04:34:28.505803 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Jun 30 04:34:28.517723 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Jun 30 04:34:28.517760 [ 0.002633] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Jun 30 04:34:28.529779 [ 0.002647] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 04:34:28.541757 [ 0.002662] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 04:34:28.541827 [ 0.002674] Ignoring duplicate/late registration of read_current_timer delay Jun 30 04:34:28.553764 [ 0.003041] Console: colour dummy device 80x30 Jun 30 04:34:28.553824 [ 0.003083] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Jun 30 04:34:28.565761 [ 0.003097] CPU: Testing write buffer coherency: ok Jun 30 04:34:28.577782 [ 0.003139] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 04:34:28.577856 [ 0.003146] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 04:34:28.589753 [ 0.003153] pid_max: default: 32768 minimum: 301 Jun 30 04:34:28.589813 [ 0.003511] LSM: Security Framework initializing Jun 30 04:34:28.601754 [ 0.003581] landlock: Up and running. Jun 30 04:34:28.601811 [ 0.003586] Yama: disabled by default; enable with sysctl kernel.yama.* Jun 30 04:34:28.613746 [ 0.003776] AppArmor: AppArmor initialized Jun 30 04:34:28.613806 [ 0.003787] TOMOYO Linux initialized Jun 30 04:34:28.613851 [ 0.003829] LSM support for eBPF active Jun 30 04:34:28.613895 [ 0.004071] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 04:34:28.625781 [ 0.004085] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 04:34:28.637774 [ 0.005520] /cpus/cpu@0 missing clock-frequency property Jun 30 04:34:28.637834 [ 0.005547] /cpus/cpu@1 missing clock-frequency property Jun 30 04:34:28.649773 [ 0.005560] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 04:34:28.649854 [ 0.006516] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 04:34:28.661753 [ 0.006522] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 04:34:28.661815 [ 0.006625] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 04:34:28.673675 [ 0.006631] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 04:34:28.673675 [ 0.006778] Setting up static identity map for 0x40300000 - 0x403000ac Jun 30 04:34:28.685750 [ 0.007949] rcu: Hierarchical SRCU implementation. Jun 30 04:34:28.685758 [ 0.007955] rcu: Max phase no-delay instances is 1000. Jun 30 04:34:28.697768 [ 0.010098] EFI services will not be available. Jun 30 04:34:28.697833 [ 0.010444] smp: Bringing up secondary CPUs ... Jun 30 04:34:28.697880 [ 0.011193] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 04:34:28.709730 [ 0.011206] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 04:34:28.721749 [ 0.011334] smp: Brought up 1 node, 2 CPUs Jun 30 04:34:28.721808 [ 0.011342] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 04:34:28.733747 [ 0.011350] CPU: All CPU(s) started in HYP mode. Jun 30 04:34:28.733807 [ 0.011353] CPU: Virtualization extensions available. Jun 30 04:34:28.733854 [ 0.012023] devtmpfs: initialized Jun 30 04:34:28.745742 [ 0.023092] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 04:34:28.745811 [ 0.023341] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Jun 30 04:34:28.757758 [ 0.023367] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 04:34:28.769766 [ 0.023848] pinctrl core: initialized pinctrl subsystem Jun 30 04:34:28.769827 [ 0.024578] DMI not present or invalid. Jun 30 04:34:28.769873 [ 0.025259] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 04:34:28.781755 [ 0.030604] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 04:34:28.781819 [ 0.032162] audit: initializing netlink subsys (disabled) Jun 30 04:34:28.793759 [ 0.032368] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 Jun 30 04:34:28.805745 [ 0.033532] thermal_sys: Registered thermal governor 'fair_share' Jun 30 04:34:28.805809 [ 0.033540] thermal_sys: Registered thermal governor 'bang_bang' Jun 30 04:34:28.817736 [ 0.033545] thermal_sys: Registered thermal governor 'step_wise' Jun 30 04:34:28.817799 [ 0.033549] thermal_sys: Registered thermal governor 'user_space' Jun 30 04:34:28.829742 [ 0.033553] thermal_sys: Registered thermal governor 'power_allocator' Jun 30 04:34:28.829806 [ 0.033924] No ATAGs? Jun 30 04:34:28.829849 [ 0.033994] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jun 30 04:34:28.841758 [ 0.034002] hw-breakpoint: maximum watchpoint size is 8 bytes. Jun 30 04:34:28.841819 [ 0.035093] Serial: AMBA PL011 UART driver Jun 30 04:34:28.853761 [ 0.091415] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Jun 30 04:34:28.865744 [ 0.102452] iommu: Default domain type: Translated Jun 30 04:34:28.865807 [ 0.102460] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 04:34:28.865858 [ 0.103446] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Jun 30 04:34:28.877731 [ 0.104009] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 04:34:28.877764 [ 0.104022] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 04:34:28.889749 [ 0.104671] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 04:34:28.901768 [ 0.104702] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 04:34:28.901840 [ 0.104885] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 04:34:28.913774 [ 0.105238] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 04:34:28.913834 [ 0.105249] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 04:34:28.925827 [ 0.105643] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 04:34:28.925909 [ 0.105934] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 04:34:28.925961 [ 0.105943] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 04:34:28.937727 [ 0.106221] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 04:34:28.937760 [ 0.106321] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 04:34:28.949738 [ 0.106330] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 04:34:28.949800 [ 0.106527] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 04:34:28.961762 [ 0.106727] pps_core: LinuxPPS API ver. 1 registered Jun 30 04:34:28.961822 [ 0.106733] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 04:34:28.973762 [ 0.106749] PTP clock support registered Jun 30 04:34:28.973820 [ 0.108245] NetLabel: Initializing Jun 30 04:34:28.985750 [ 0.108251] NetLabel: domain hash size = 128 Jun 30 04:34:28.985812 [ 0.108256] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Jun 30 04:34:28.985861 [ 0.108328] NetLabel: unlabeled traffic allowed by default Jun 30 04:34:28.997735 [ 0.108489] vgaarb: loaded Jun 30 04:34:28.997766 [ 0.109160] clocksource: Switched to clocksource mct-frc Jun 30 04:34:28.997792 [ 0.178582] VFS: Disk quotas dquot_6.6.0 Jun 30 04:34:29.009714 [ 0.178675] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jun 30 04:34:29.009714 [ 0.179412] AppArmor: AppArmor Filesystem Enabled Jun 30 04:34:29.021780 [ 0.188472] NET: Registered PF_INET protocol family Jun 30 04:34:29.021845 [ 0.188681] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Jun 30 04:34:29.033728 [ 0.190311] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 04:34:29.033796 [ 0.190404] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 04:34:29.045733 [ 0.190427] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Jun 30 04:34:29.057757 [ 0.190522] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Jun 30 04:34:29.057822 [ 0.190751] TCP: Hash tables configured (established 8192 bind 8192) Jun 30 04:34:29.069756 [ 0.190973] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Jun 30 04:34:29.081795 [ 0.191059] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 04:34:29.081862 [ 0.191098] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 04:34:29.093757 [ 0.191298] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 04:34:29.093820 [ 0.191333] NET: Registered PF_XDP protocol family Jun 30 04:34:29.105736 [ 0.191343] PCI: CLS 0 bytes, default 64 Jun 30 04:34:29.105797 [ 0.191863] Trying to unpack rootfs image as initramfs... Jun 30 04:34:29.105846 [ 0.192282] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Jun 30 04:34:29.117758 [ 0.192488] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Jun 30 04:34:29.129681 [ 0.194116] Initialise system trusted keyrings Jun 30 04:34:29.129681 [ 0.194189] Key type blacklist registered Jun 30 04:34:29.129681 [ 0.194419] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Jun 30 04:34:29.141766 [ 0.201664] zbud: loaded Jun 30 04:34:29.141826 [ 0.202725] integrity: Platform Keyring initialized Jun 30 04:34:29.141874 [ 0.202754] integrity: Machine keyring initialized Jun 30 04:34:29.153753 [ 0.202762] Key type asymmetric registered Jun 30 04:34:29.153811 [ 0.202769] Asymmetric key parser 'x509' registered Jun 30 04:34:29.165711 [ 1.561268] Freeing initrd memory: 25696K Jun 30 04:34:29.165771 [ 1.573025] alg: self-tests for CTR-KDF (hmac(sha256)) passed Jun 30 04:34:29.165820 [ 1.573340] bounce: pool size: 64 pages Jun 30 04:34:29.177752 [ 1.573503] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Jun 30 04:34:29.177816 [ 1.573668] io scheduler mq-deadline registered Jun 30 04:34:29.189760 [ 1.578785] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Jun 30 04:34:29.189830 [ 1.599734] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 04:34:29.201756 [ 1.599746] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 04:34:29.213768 [ 1.602091] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 04:34:29.213835 [ 1.602101] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 04:34:29.225767 [ 1.602895] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 04:34:29.237708 [ 1.602904] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 04:34:29.249760 [ 1.603734] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 04:34:29.249835 [ 1.603744] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 04:34:29.261752 [ 1.606144] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 04:34:29.273752 [ 1.608927] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 04:34:29.273814 [ 1.611665] Serial: AMBA driver Jun 30 04:34:29.285752 [ 1.611911] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 04:34:29.285823 [ 1.612390] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 04:34:29.297802 [ 1.612862] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 04:34:29.309811 [ 2.743759] printk: console [ttySAC2] enabled Jun 30 04:34:29.309871 [ 2.748573] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Jun 30 04:34:29.321680 [ 2.759249] STM32 USART driver initialized Jun 30 04:34:29.321712 [ 2.773460] mousedev: PS/2 mouse device common for all mice Jun 30 04:34:29.345693 [ 2.804610] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 04:34:29.369711 [ 2.813247] s5m-rtc s5m-rtc: setting system clock to 2024-06-30T04:34:32 UTC (1719722072) Jun 30 04:34:29.381752 [ 2.823164] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Jun 30 04:34:29.393742 [ 2.830640] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 04:34:29.393805 [ 2.838616] NET: Registered PF_INET6 protocol family Jun 30 04:34:29.405712 [ 2.852357] Segment Routing with IPv6 Jun 30 04:34:29.417739 [ 2.854645] In-situ OAM (IOAM) with IPv6 Jun 30 04:34:29.417797 [ 2.858546] mip6: Mobile IPv6 Jun 30 04:34:29.429725 [ 2.861453] NET: Registered PF_PACKET protocol family Jun 30 04:34:29.429786 [ 2.866607] mpls_gso: MPLS GSO support Jun 30 04:34:29.429832 [ 2.870791] ThumbEE CPU extension supported. Jun 30 04:34:29.441758 [ 2.874474] Registering SWP/SWPB emulation handler Jun 30 04:34:29.441818 [ 2.879691] registered taskstats version 1 Jun 30 04:34:29.441864 [ 2.883349] Loading compiled-in X.509 certificates Jun 30 04:34:29.453683 [ 3.339642] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Jun 30 04:34:29.909773 [ 3.346998] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Jun 30 04:34:29.921764 [ 3.358036] zswap: loaded using pool lzo/zbud Jun 30 04:34:29.921823 [ 3.362010] Key type .fscrypt registered Jun 30 04:34:29.933717 [ 3.365291] Key type fscrypt-provisioning registered Jun 30 04:34:29.933779 [ 3.379089] Key type encrypted registered Jun 30 04:34:29.945767 [ 3.381687] AppArmor: AppArmor sha1 policy hashing enabled Jun 30 04:34:29.945828 [ 3.387143] ima: No TPM chip found, activating TPM-bypass! Jun 30 04:34:29.957762 [ 3.392605] ima: Allocated hash algorithm: sha256 Jun 30 04:34:29.957841 [ 3.397326] ima: No architecture policies found Jun 30 04:34:29.969738 [ 3.401837] evm: Initialising EVM extended attributes: Jun 30 04:34:29.969800 [ 3.406911] evm: security.selinux Jun 30 04:34:29.969844 [ 3.410199] evm: security.SMACK64 (disabled) Jun 30 04:34:29.981742 [ 3.414450] evm: security.SMACK64EXEC (disabled) Jun 30 04:34:29.981802 [ 3.419055] evm: security.SMACK64TRANSMUTE (disabled) Jun 30 04:34:29.981849 [ 3.424089] evm: security.SMACK64MMAP (disabled) Jun 30 04:34:29.993759 [ 3.428686] evm: security.apparmor Jun 30 04:34:29.993817 [ 3.432073] evm: security.ima Jun 30 04:34:29.993860 [ 3.435021] evm: security.capability Jun 30 04:34:30.005718 [ 3.438588] evm: HMAC attrs: 0x1 Jun 30 04:34:30.005775 [ 4.022154] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 04:34:30.593701 [ 4.048464] Freeing unused kernel image (initmem) memory: 2048K Jun 30 04:34:30.617751 [ 4.053349] Checked W+X mappings: passed, no W+X pages found Jun 30 04:34:30.617813 [ 4.058589] Run /init as init process Jun 30 04:34:30.629688 [ 4.607348] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 04:34:31.181669 [ 4.677918] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 04:34:31.253669 [ 4.700134] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 04:34:31.265763 [ 4.708381] usbcore: registered new interface driver usbfs Jun 30 04:34:31.277704 [ 4.725674] usbcore: registered new interface driver hub Jun 30 04:34:31.289727 [ 4.730937] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 04:34:31.301728 [ 4.760280] usbcore: registered new device driver usb Jun 30 04:34:31.325717 [ 4.784767] phy phy-12130000.phy.1: phy_power_on was called before phy_init Jun 30 04:34:31.349747 [ 4.790368] phy phy-12130000.phy.1: phy_power_on was called before phy_init Jun 30 04:34:31.361752 [ 4.797408] exynos-ohci 12120000.usb: USB Host Controller Jun 30 04:34:31.361814 [ 4.802650] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Jun 30 04:34:31.373719 [ 4.832118] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Jun 30 04:34:31.397767 [ 4.832302] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 04:34:31.409727 [ 4.845401] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 04:34:31.409789 [ 4.868340] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Jun 30 04:34:31.433758 [ 4.904877] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Jun 30 04:34:31.469751 [ 4.911742] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 04:34:31.481753 [ 4.918947] usb usb1: Product: USB Host Controller Jun 30 04:34:31.481812 [ 4.923682] usb usb1: Manufacturer: Linux 6.1.0-18-armmp ohci_hcd Jun 30 04:34:31.493752 [ 4.929762] usb usb1: SerialNumber: 12120000.usb Jun 30 04:34:31.493812 [ 4.941412] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Jun 30 04:34:31.505726 [ 4.950438] hub 1-0:1.0: USB hub found Jun 30 04:34:31.517752 [ 4.953341] usb3503 usb-hub: switched to HUB mode Jun 30 04:34:31.517812 [ 4.954545] hub 1-0:1.0: 3 ports detected Jun 30 04:34:31.529753 [ 4.957447] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 04:34:31.529816 [ 4.968004] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 04:34:31.541740 [ 4.975658] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 04:34:31.541811 [ 4.982504] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 04:34:31.553761 [ 4.989680] usb usb2: Product: EHCI Host Controller Jun 30 04:34:31.553820 [ 4.994539] usb usb2: Manufacturer: Linux 6.1.0-18-armmp ehci_hcd Jun 30 04:34:31.565735 [ 5.000615] usb usb2: SerialNumber: 12110000.usb Jun 30 04:34:31.565794 [ 5.081144] hub 2-0:1.0: USB hub found Jun 30 04:34:31.649742 [ 5.083567] hub 2-0:1.0: 3 ports detected Jun 30 04:34:31.649802 [ 5.168227] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 04:34:31.733743 [ 5.172427] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 04:34:31.745760 [ 5.180516] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 Jun 30 04:34:31.757725 [ 5.189326] xhci-hcd xhci-hcd.2.auto: irq 108, io mem 0x12000000 Jun 30 04:34:31.757789 [ 5.195475] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 04:34:31.769741 [ 5.200745] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 04:34:31.769812 [ 5.208384] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 04:34:31.781749 [ 5.215154] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 04:34:31.781821 [ 5.223142] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 04:34:31.793777 [ 5.230340] usb usb3: Product: xHCI Host Controller Jun 30 04:34:31.793840 [ 5.235200] usb usb3: Manufacturer: Linux 6.1.0-18-armmp xhci-hcd Jun 30 04:34:31.805763 [ 5.241275] usb usb3: SerialNumber: xhci-hcd.2.auto Jun 30 04:34:31.805827 [ 5.246719] hub 3-0:1.0: USB hub found Jun 30 04:34:31.817773 [ 5.249913] hub 3-0:1.0: 1 port detected Jun 30 04:34:31.817832 [ 5.254276] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 04:34:31.829735 [ 5.261976] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Jun 30 04:34:31.829805 [ 5.270099] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 04:34:31.841757 [ 5.277302] usb usb4: Product: xHCI Host Controller Jun 30 04:34:31.841820 [ 5.282167] usb usb4: Manufacturer: Linux 6.1.0-18-armmp xhci-hcd Jun 30 04:34:31.853758 [ 5.288230] usb usb4: SerialNumber: xhci-hcd.2.auto Jun 30 04:34:31.853819 [ 5.293904] hub 4-0:1.0: USB hub found Jun 30 04:34:31.865701 [ 5.296856] hub 4-0:1.0: 1 port detected Jun 30 04:34:31.865761 [ 5.353219] usb 2-3: new high-speed USB device number 2 using exynos-ehci Jun 30 04:34:31.917714 Starting system log daemon: syslogd, klogd. Jun 30 04:34:32.013773 /var/run/utmp: No such file or directory Jun 30 04:34:33.877693 [?1h=(B   Jun 30 04:34:33.913770  Jun 30 04:34:33.925735 [  (-*) ][ Jun 30  4:34 ] Jun 30 04:34:33.937760 [  (0*start) ][ Jun 30  4:34 ] Jun 30 04:34:33.949722 [  (0*start) ][ Jun 30  4:34 ] Jun 30 04:34:33.961774 [  (0*start) ][ Jun 30  4:34 ] Jun 30 04:34:33.973792 [  (0*start) ][ Jun 30  4:34 ]                        [  (0*start) ][ Jun 30  4:34 ][  (0*start) ][ Jun 30  4:34 ] Jun 30 04:34:34.033813 [ 0- start  (2*shell) ][ Jun 30  4:34 ] Jun 30 04:34:34.045794 [ 0- start  (2*shell) ][ Jun 30  4:34 ] Jun 30 04:34:34.057801 [ 0- start  (2*shell) ][ Jun 30  4:34 ] Jun 30 04:34:34.081751 [ 0- start  (2*shell) ][ Jun 30  4:34 ]                        [ 0- start  (2*shell) ][ Jun 30  4:34 ][ 0- start  (2*shell) ][ Jun 30  4:34 ] Jun 30 04:34:34.129758 [ 0 start 2- shell  (3*shell) ][ Jun 30  4:34 ] Jun 30 04:34:34.141665 [ 0 start 2- shell  (3*shell) ][ Jun 30  4:34 ] Jun 30 04:34:34.165691 [ 0 start 2- shell  (3*shell) ][ Jun 30  4:34 ] Jun 30 04:34:34.177736 [ 0 start 2- shell  (3*shell) ][ Jun 30  4:34 ]                        [ 0 start 2- shell  (3*shell) ][ Jun 30  4:34 ][ 0 start 2- shell  (3*shell) ][ Jun 30  4:34 ] Jun 30 04:34:34.225787 [ 0 start 2 shell 3- shell  (4*log) ][ Jun 30  4:34 ] Jun 30 04:34:34.249752 [ 0 start 2 shell 3- shell  (4*log) ][ Jun 30  4:34 ] Jun 30 04:34:34.261672 [ 0 start 2 shell 3- shell  (4*log) ][ Jun 30  4:34 ] Jun 30 04:34:34.273772 [ 0 start 2 shell 3- shell  (4*log) ][ Jun 30  4:34 ]                        [ 0 start 2 shell 3- shell  (4*log) ][ Jun 30  4:34 ][ 0 start 2 shell 3- shell  (4*log) ][ Jun 30  4:34 ] Jun 30 04:34:34.333740 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30  4:34 ] Jun 30 04:34:34.345742 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30  4:34 ] Jun 30 04:34:34.357726 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30  4:34 ] Jun 30 04:34:34.373629 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30  4:34 ]                        [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30  4:34 ][ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30  4:34 ] Jun 30 04:34:34.421700 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  4:34 ] Jun 30 04:34:34.433773 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  4:34 ] Jun 30 04:34:34.445738 [  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  4:34 ] Jun 30 04:34:34.909705 Detecting network hardware ... 2%... 95%... 100% Jun 30 04:34:36.713700 Detecting link on eth0; please wait... ... 0%... 10%... 20% Jun 30 04:34:41.597617 Waiting for link-local address... ... 8%... 16%... 25%... 33%... 100% Jun 30 04:34:42.629644 Attempting IPv6 autoconfiguration... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 75%... 83%... 91%... 100% Jun 30 04:34:48.701772 Configuring the network with DHCP ... 0%... 100% Jun 30 04:34:51.869717 [  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  4:35 ] Checking the Debian archive mirror ... 25%... 50%... 75%... 100% Jun 30 04:35:00.121815 Loading additional components ... 0%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Jun 30 04:35:34.032529 Setting up the clock ... 0%... 100% Jun 30 04:35:36.824376 Loading additional components ... 50%... 100% Jun 30 04:35:38.505643 Detecting disks and all other hardware ... 2%... 95%... 100% Jun 30 04:35:42.489626 Loading additional components ... 5%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Jun 30 04:35:51.465715 Loading additional components ... 25%... 50%... 75%... 100% Jun 30 04:35:53.857732 Starting up the partitioner ... 4%... 13%... 21%... 30%... 43%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  4:36 ]... 52%... 60%... 73%... 82%... 91%... 100% Jun 30 04:36:06.289595 Guided partitioning ... 16%... 33%... 50%... 66%... 83%... 100% Jun 30 04:36:14.717739 Starting up the partitioner ... 4%... 12%... 20%... 32%... 40%... 52%... 60%... 72%... 80%... 92%... 100% Jun 30 04:36:24.600538 Partitions formatting ... 33% Jun 30 04:36:33.161734 Partitions formatting Jun 30 04:36:42.557712 Partitions formatting Installing the base system ... 0%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  4:37 ]... 17%... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  4:38 ]... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  4:39 ][  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  4:40 ]... 48%... 50%...  Jun 30 04:40:32.041688  60%... 70%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  4:41 ]... 79%... 83%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  4:42 ][  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  4:43 ]... 91%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  4:44 ]... 100% Jun 30 04:44:59.168510 [  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  4:45 ] Configuring apt ... 7%... 14%... 14%... 21%... 35%... 42%... 50%... 60%... 71%. Jun 30 04:45:36.621740 ... 82%... 92%... 100% Jun 30 04:45:39.333695 Select and install software ... 1%... 10%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  4:46 ]... 13%... 20%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  4:47 ]... 30%... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  4:48 ]... 50%... Jun 30 04:48:29.297736 . 60%... 70%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  4:49 ]... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  4:50 ]... 88%... 90%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  4:51 ]... 94%... 100% Jun 30 04:51:45.001745 Finishing the installation ... 4%... 12%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  4:52 ][  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  4:53 ]... 16%... 20%... 32%... 40%... 44%... Jun 30 04:53:33.505678  52%... 60%... 72%... 80%... 92% The system is going down NOW! Sent SIGKILL to all processes Jun 30 04:53:44.521728 Requesting system reboot Jun 30 04:53:44.521795 [ 1158.993027] reboot: Reű Jun 30 04:53:45.881755 Jun 30 04:53:45.881817 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 04:53:45.881869 Jun 30 04:53:45.881942 CPU: Exynos5250@1000MHz Jun 30 04:53:45.881987 Jun 30 04:53:45.882025 Board: Arndale Jun 30 04:53:45.882066 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 04:53:45.893789 ready Jun 30 04:53:45.893842 DRAM: 2 GiB Jun 30 04:53:45.893884 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 04:53:45.917681 trace: enabled Jun 30 04:53:45.953694 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 04:53:46.313732 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 04:53:46.361743 In: serial Jun 30 04:53:46.361797 Out: serial Jun 30 04:53:46.373744 Err: serial Jun 30 04:53:46.373798 SCSI: ARNDALE SCSI INIT Jun 30 04:53:46.373842 Target spinup took 0 ms. Jun 30 04:53:46.373884 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 04:53:46.385773 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 04:53:46.385835 Net: Net Initialization Skipped Jun 30 04:53:46.385880 No ethernet found. Jun 30 04:53:46.397737 Hostname: arndale-metrocentre Jun 30 04:53:46.397795 Hit any key to stop autoboot: 2  1  0 Jun 30 04:53:48.317709 (Re)start USB... Jun 30 04:53:48.317772 USB0: USB EHCI 1.00 Jun 30 04:53:48.329711 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 04:53:53.921640 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 04:53:53.933579 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 04:53:54.369833 Waiting for Ethernet connection... done. Jun 30 04:53:55.973715 BOOTP broadcast 1 Jun 30 04:53:55.973782 BOOTP broadcast 2 Jun 30 04:53:58.268655 DHCP client bound to address 10.149.64.44 (2387 ms) Jun 30 04:53:58.268655 Using asx0 device Jun 30 04:53:58.268655 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 04:53:58.280572 Filename 'pxelinux.0'. Jun 30 04:53:58.280572 Load address: 0x43e00000 Jun 30 04:53:58.280572 Loading: *### Jun 30 04:53:58.292566 2.4 MiB/s Jun 30 04:53:58.292566 done Jun 30 04:53:58.304551 Bytes transferred = 42430 (a5be hex) Jun 30 04:53:58.304551 missing environment variable: pxeuuid Jun 30 04:53:58.304551 Retrieving file: pxelinux.cfg/0A95402C Jun 30 04:53:58.304551 Using asx0 device Jun 30 04:53:58.304551 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 04:53:58.316554 Filename 'pxelinux.cfg/0A95402C'. Jun 30 04:53:58.316554 Load address: 0x51000000 Jun 30 04:53:58.316554 Loading: *# Jun 30 04:53:58.328515 31.3 KiB/s Jun 30 04:53:58.328515 done Jun 30 04:53:58.328515 Bytes transferred = 65 (41 hex) Jun 30 04:53:58.328515 Config file found Jun 30 04:53:58.328515 Ignoring unknown command: serial Jun 30 04:53:58.328515 1: local Jun 30 04:53:58.328515 scanning bus for devices... Jun 30 04:53:58.340505 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 04:53:58.364569 Type: Hard Disk Jun 30 04:53:58.364569 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 04:53:58.364569 Found 1 device(s). Jun 30 04:53:58.376542 Jun 30 04:53:58.376542 SCSI device 0: Jun 30 04:53:58.376542 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 04:53:58.376542 Type: Hard Disk Jun 30 04:53:58.376542 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 04:53:58.388610 ... is now current device Jun 30 04:53:58.388610 Scanning scsi 0... Jun 30 04:53:58.388610 Found U-Boot script /boot.scr Jun 30 04:53:58.500485 641 bytes read in 47 ms (12.7 KiB/s) Jun 30 04:53:58.552476 ## Executing script at 50000000 Jun 30 04:53:58.564535 Loading dtbs/exynos5250-arndale.dtb Jun 30 04:53:58.564535 46686 bytes read in 982 ms (45.9 KiB/s) Jun 30 04:53:59.536742 Loading vmlinuz-6.1.0-22-armmp-lpae Jun 30 04:53:59.536813 5505536 bytes read in 189 ms (27.8 MiB/s) Jun 30 04:53:59.740792 Loading initrd.img-6.1.0-22-armmp-lpae Jun 30 04:53:59.740852 25720802 bytes read in 1929 ms (12.7 MiB/s) Jun 30 04:54:01.621874 Booting Jun 30 04:54:01.621911 Kernel image @ 0x42000000 [ 0x000000 - 0x540200 ] Jun 30 04:54:01.621937 ## Flattened Device Tree blob at 43000000 Jun 30 04:54:01.621961 Booting using the fdt blob at 0x43000000 Jun 30 04:54:01.633846 Loading Ramdisk to 4e778000, end 4ffff7e2 ... OK Jun 30 04:54:02.041649 Loading Device Tree to 4e769000, end 4e77765d ... OK Jun 30 04:54:02.053668 Jun 30 04:54:02.053696 Starting kernel ...(fake run for tracing) Jun 30 04:54:02.065655 Jun 30 04:54:02.065683 Jun 30 04:54:02.065703 Starting kernel ... Jun 30 04:54:02.065726 Jun 30 04:54:02.065746 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 04:54:08.221692 [ 0.000000] Linux version 6.1.0-22-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.94-1 (2024-06-21) Jun 30 04:54:08.233849 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=30c5387d Jun 30 04:54:08.245742 [ 0.000000] CPU: div instructions available: patching division code Jun 30 04:54:08.245782 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 04:54:08.257618 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 04:54:08.269638 [ 0.000000] Memory policy: Data cache writealloc Jun 30 04:54:08.269639 [ 0.000000] efi: UEFI not found. Jun 30 04:54:08.269704 [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000 Jun 30 04:54:08.281615 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 04:54:08.281615 [ 0.000000] Zone ranges: Jun 30 04:54:08.281654 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Jun 30 04:54:08.293675 [ 0.000000] Normal empty Jun 30 04:54:08.293733 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Jun 30 04:54:08.305671 [ 0.000000] Movable zone start for each node Jun 30 04:54:08.305729 [ 0.000000] Early memory node ranges Jun 30 04:54:08.305773 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 04:54:08.317668 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 04:54:08.317718 [ 0.000000] percpu: Embedded 18 pages/cpu s44756 r8192 d20780 u73728 Jun 30 04:54:08.329665 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Jun 30 04:54:08.329686 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=ttySAC2,115200n8 Jun 30 04:54:08.341660 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Jun 30 04:54:08.353675 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 04:54:08.365676 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Jun 30 04:54:08.365740 [ 0.000000] Memory: 2015520K/2097152K available (12288K kernel code, 1714K rwdata, 3748K rodata, 2048K init, 382K bss, 65248K reserved, 16384K cma-reserved, 1294332K highmem) Jun 30 04:54:08.377700 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 04:54:08.389676 [ 0.000000] ftrace: allocating 39982 entries in 118 pages Jun 30 04:54:08.389738 [ 0.000000] ftrace: allocated 118 pages with 5 groups Jun 30 04:54:08.401668 [ 0.000000] trace event string verifier disabled Jun 30 04:54:08.401727 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 04:54:08.413669 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Jun 30 04:54:08.413735 [ 0.000000] Rude variant of Tasks RCU enabled. Jun 30 04:54:08.425670 [ 0.000000] Tracing variant of Tasks RCU enabled. Jun 30 04:54:08.425734 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Jun 30 04:54:08.437668 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 04:54:08.437734 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 04:54:08.449667 [ 0.000000] GIC: Using split EOI/Deactivate mode Jun 30 04:54:08.449728 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 04:54:08.461937 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 04:54:08.461971 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Jun 30 04:54:08.474159 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Jun 30 04:54:08.474230 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Jun 30 04:54:08.486047 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Jun 30 04:54:08.497701 [ 0.002642] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Jun 30 04:54:08.497759 [ 0.002657] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 04:54:08.509625 [ 0.002672] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 04:54:08.521642 [ 0.002684] Ignoring duplicate/late registration of read_current_timer delay Jun 30 04:54:08.521673 [ 0.003048] Console: colour dummy device 80x30 Jun 30 04:54:08.533760 [ 0.003089] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Jun 30 04:54:08.533829 [ 0.003102] CPU: Testing write buffer coherency: ok Jun 30 04:54:08.545683 [ 0.003144] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 04:54:08.557633 [ 0.003152] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 04:54:08.557634 [ 0.003159] pid_max: default: 32768 minimum: 301 Jun 30 04:54:08.569864 [ 0.003513] LSM: Security Framework initializing Jun 30 04:54:08.569929 [ 0.003584] landlock: Up and running. Jun 30 04:54:08.569929 [ 0.003588] Yama: disabled by default; enable with sysctl kernel.yama.* Jun 30 04:54:08.581539 [ 0.003771] AppArmor: AppArmor initialized Jun 30 04:54:08.581621 [ 0.003784] TOMOYO Linux initialized Jun 30 04:54:08.581653 [ 0.003828] LSM support for eBPF active Jun 30 04:54:08.593503 [ 0.004073] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 04:54:08.593614 [ 0.004087] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 04:54:08.605628 [ 0.005490] /cpus/cpu@0 missing clock-frequency property Jun 30 04:54:08.605665 [ 0.005517] /cpus/cpu@1 missing clock-frequency property Jun 30 04:54:08.617615 [ 0.005530] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 04:54:08.617644 [ 0.006478] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 04:54:08.629755 [ 0.006484] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 04:54:08.629816 [ 0.006587] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 04:54:08.641749 [ 0.006593] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 04:54:08.653748 [ 0.006732] Setting up static identity map for 0x40400000 - 0x404000ac Jun 30 04:54:08.653811 [ 0.007896] rcu: Hierarchical SRCU implementation. Jun 30 04:54:08.653859 [ 0.007902] rcu: Max phase no-delay instances is 1000. Jun 30 04:54:08.665756 [ 0.010039] EFI services will not be available. Jun 30 04:54:08.665815 [ 0.010378] smp: Bringing up secondary CPUs ... Jun 30 04:54:08.677744 [ 0.011115] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 04:54:08.677805 [ 0.011127] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 04:54:08.689748 [ 0.011260] smp: Brought up 1 node, 2 CPUs Jun 30 04:54:08.689806 [ 0.011269] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 04:54:08.701736 [ 0.011277] CPU: All CPU(s) started in HYP mode. Jun 30 04:54:08.701796 [ 0.011280] CPU: Virtualization extensions available. Jun 30 04:54:08.713725 [ 0.012153] devtmpfs: initialized Jun 30 04:54:08.713783 [ 0.022927] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 04:54:08.713839 [ 0.023158] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Jun 30 04:54:08.725771 [ 0.023183] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 04:54:08.737741 [ 0.023721] pinctrl core: initialized pinctrl subsystem Jun 30 04:54:08.737802 [ 0.024467] DMI not present or invalid. Jun 30 04:54:08.749741 [ 0.025137] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 04:54:08.749804 [ 0.026676] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 04:54:08.761745 [ 0.028156] audit: initializing netlink subsys (disabled) Jun 30 04:54:08.761807 [ 0.028359] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 Jun 30 04:54:08.773744 [ 0.029537] thermal_sys: Registered thermal governor 'fair_share' Jun 30 04:54:08.773806 [ 0.029544] thermal_sys: Registered thermal governor 'bang_bang' Jun 30 04:54:08.785755 [ 0.029549] thermal_sys: Registered thermal governor 'step_wise' Jun 30 04:54:08.785818 [ 0.029554] thermal_sys: Registered thermal governor 'user_space' Jun 30 04:54:08.797742 [ 0.029558] thermal_sys: Registered thermal governor 'power_allocator' Jun 30 04:54:08.797805 [ 0.029758] No ATAGs? Jun 30 04:54:08.809732 [ 0.029826] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jun 30 04:54:08.809820 [ 0.029834] hw-breakpoint: maximum watchpoint size is 8 bytes. Jun 30 04:54:08.821751 [ 0.030918] Serial: AMBA PL011 UART driver Jun 30 04:54:08.821810 [ 0.080502] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 30 04:54:08.833700 [ 0.087387] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Jun 30 04:54:08.833738 [ 0.091769] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages Jun 30 04:54:08.845764 [ 0.091778] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page Jun 30 04:54:08.845826 [ 0.098700] iommu: Default domain type: Translated Jun 30 04:54:08.857749 [ 0.098708] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 04:54:08.857812 [ 0.099697] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Jun 30 04:54:08.869753 [ 0.100239] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 04:54:08.869813 [ 0.100251] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 04:54:08.881751 [ 0.100756] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 04:54:08.893736 [ 0.100786] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 04:54:08.893808 [ 0.100990] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 04:54:08.905728 [ 0.101347] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 04:54:08.905789 [ 0.101357] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 04:54:08.917744 [ 0.101744] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 04:54:08.917805 [ 0.102033] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 04:54:08.917852 [ 0.102042] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 04:54:08.929764 [ 0.102334] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 04:54:08.929824 [ 0.102433] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 04:54:08.941742 [ 0.102442] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 04:54:08.941804 [ 0.102622] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 04:54:08.953749 [ 0.102835] pps_core: LinuxPPS API ver. 1 registered Jun 30 04:54:08.953810 [ 0.102841] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 04:54:08.965772 [ 0.102856] PTP clock support registered Jun 30 04:54:08.965829 [ 0.104448] NetLabel: Initializing Jun 30 04:54:08.965874 [ 0.104454] NetLabel: domain hash size = 128 Jun 30 04:54:08.977681 [ 0.104459] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Jun 30 04:54:08.977681 [ 0.104515] NetLabel: unlabeled traffic allowed by default Jun 30 04:54:08.989651 [ 0.104693] vgaarb: loaded Jun 30 04:54:08.989651 [ 0.105635] clocksource: Switched to clocksource mct-frc Jun 30 04:54:08.989651 [ 0.106232] VFS: Disk quotas dquot_6.6.0 Jun 30 04:54:09.001657 [ 0.106315] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jun 30 04:54:09.001657 [ 0.107075] AppArmor: AppArmor Filesystem Enabled Jun 30 04:54:09.013666 [ 0.117009] NET: Registered PF_INET protocol family Jun 30 04:54:09.013666 [ 0.117213] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Jun 30 04:54:09.025656 [ 0.118677] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 04:54:09.025656 [ 0.118778] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 04:54:09.037684 [ 0.118804] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Jun 30 04:54:09.049650 [ 0.118904] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Jun 30 04:54:09.049650 [ 0.119134] TCP: Hash tables configured (established 8192 bind 8192) Jun 30 04:54:09.061669 [ 0.119378] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Jun 30 04:54:09.061669 [ 0.119472] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 04:54:09.073647 [ 0.119514] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 04:54:09.085627 [ 0.119752] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 04:54:09.085627 [ 0.119794] NET: Registered PF_XDP protocol family Jun 30 04:54:09.085627 [ 0.119806] PCI: CLS 0 bytes, default 64 Jun 30 04:54:09.097667 [ 0.120316] Trying to unpack rootfs image as initramfs... Jun 30 04:54:09.097667 [ 0.120654] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Jun 30 04:54:09.109644 [ 0.126167] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Jun 30 04:54:09.121808 [ 0.190715] Initialise system trusted keyrings Jun 30 04:54:09.121865 [ 0.190818] Key type blacklist registered Jun 30 04:54:09.121890 [ 0.192046] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Jun 30 04:54:09.133660 [ 0.199918] zbud: loaded Jun 30 04:54:09.133660 [ 0.201910] integrity: Platform Keyring initialized Jun 30 04:54:09.133660 [ 0.201971] integrity: Machine keyring initialized Jun 30 04:54:09.145900 [ 0.201981] Key type asymmetric registered Jun 30 04:54:09.145966 [ 0.201989] Asymmetric key parser 'x509' registered Jun 30 04:54:09.157819 [ 1.422787] Freeing initrd memory: 25120K Jun 30 04:54:09.157824 [ 1.444826] alg: self-tests for CTR-KDF (hmac(sha256)) passed Jun 30 04:54:09.157824 [ 1.445099] bounce: pool size: 64 pages Jun 30 04:54:09.169693 [ 1.445291] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Jun 30 04:54:09.169693 [ 1.445455] io scheduler mq-deadline registered Jun 30 04:54:09.181760 [ 1.450598] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Jun 30 04:54:09.181835 [ 1.471611] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 04:54:09.193780 [ 1.471623] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 04:54:09.205717 [ 1.473969] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 04:54:09.205773 [ 1.473979] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 04:54:09.217781 [ 1.474792] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 04:54:09.229748 [ 1.474801] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 04:54:09.241759 [ 1.475615] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 04:54:09.241828 [ 1.475623] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 04:54:09.253705 [ 1.477982] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 04:54:09.265754 [ 1.480769] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 04:54:09.265817 [ 1.483549] Serial: AMBA driver Jun 30 04:54:09.277745 [ 1.483774] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 04:54:09.277817 [ 1.484246] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 04:54:09.289733 [ 1.484711] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 04:54:09.301757 [ 2.565521] printk: console [ttySAC2] enabled Jun 30 04:54:09.301816 [ 2.570362] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Jun 30 04:54:09.313691 [ 2.580990] STM32 USART driver initialized Jun 30 04:54:09.313750 [ 2.595421] mousedev: PS/2 mouse device common for all mice Jun 30 04:54:09.337622 [ 2.626614] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 04:54:09.361704 [ 2.635246] s5m-rtc s5m-rtc: setting system clock to 2024-06-30T04:54:09 UTC (1719723249) Jun 30 04:54:09.373751 [ 2.645083] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Jun 30 04:54:09.385742 [ 2.652500] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 04:54:09.385836 [ 2.660521] NET: Registered PF_INET6 protocol family Jun 30 04:54:09.397692 [ 2.684710] Segment Routing with IPv6 Jun 30 04:54:09.421719 [ 2.686991] In-situ OAM (IOAM) with IPv6 Jun 30 04:54:09.421777 [ 2.690984] mip6: Mobile IPv6 Jun 30 04:54:09.421831 [ 2.693793] NET: Registered PF_PACKET protocol family Jun 30 04:54:09.433791 [ 2.698946] mpls_gso: MPLS GSO support Jun 30 04:54:09.433850 [ 2.702979] ThumbEE CPU extension supported. Jun 30 04:54:09.445793 [ 2.706844] Registering SWP/SWPB emulation handler Jun 30 04:54:09.445855 [ 2.712030] registered taskstats version 1 Jun 30 04:54:09.445901 [ 2.715687] Loading compiled-in X.509 certificates Jun 30 04:54:09.457695 [ 3.175074] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Jun 30 04:54:09.913737 [ 3.182419] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Jun 30 04:54:09.925779 [ 3.193532] zswap: loaded using pool lzo/zbud Jun 30 04:54:09.925837 [ 3.197374] Key type .fscrypt registered Jun 30 04:54:09.937718 [ 3.200749] Key type fscrypt-provisioning registered Jun 30 04:54:09.937778 [ 3.225035] Key type encrypted registered Jun 30 04:54:09.961740 [ 3.227633] AppArmor: AppArmor sha1 policy hashing enabled Jun 30 04:54:09.961801 [ 3.233140] ima: No TPM chip found, activating TPM-bypass! Jun 30 04:54:09.973764 [ 3.238566] ima: Allocated hash algorithm: sha256 Jun 30 04:54:09.973824 [ 3.243270] ima: No architecture policies found Jun 30 04:54:09.985755 [ 3.247830] evm: Initialising EVM extended attributes: Jun 30 04:54:09.985817 [ 3.252852] evm: security.selinux Jun 30 04:54:09.985861 [ 3.256152] evm: security.SMACK64 (disabled) Jun 30 04:54:09.997740 [ 3.260402] evm: security.SMACK64EXEC (disabled) Jun 30 04:54:09.997800 [ 3.264999] evm: security.SMACK64TRANSMUTE (disabled) Jun 30 04:54:09.997847 [ 3.270035] evm: security.SMACK64MMAP (disabled) Jun 30 04:54:10.009764 [ 3.274632] evm: security.apparmor Jun 30 04:54:10.009822 [ 3.278017] evm: security.ima Jun 30 04:54:10.009865 [ 3.280952] evm: security.capability Jun 30 04:54:10.021706 [ 3.284527] evm: HMAC attrs: 0x1 Jun 30 04:54:10.021764 [ 3.874303] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 04:54:10.609830 [ 3.880246] clk: Disabling unused clocks Jun 30 04:54:10.609895 [ 3.893177] Freeing unused kernel image (initmem) memory: 2048K Jun 30 04:54:10.633806 [ 3.898044] Checked W+X mappings: passed, no W+X pages found Jun 30 04:54:10.633870 [ 3.903300] Run /init as init process Jun 30 04:54:10.633916 Loading, please wait... Jun 30 04:54:10.669757 Starting systemd-udevd version 252.26-1~deb12u2 Jun 30 04:54:10.741772 [ 4.846773] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 04:54:11.581776 [ 4.855586] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 04:54:11.593771 [ 4.870263] usbcore: registered new interface driver usbfs Jun 30 04:54:11.605793 [ 4.878329] usbcore: registered new interface driver hub Jun 30 04:54:11.617750 [ 4.882613] usbcore: registered new device driver usb Jun 30 04:54:11.617811 [ 4.894711] phy phy-12130000.phy.2: phy_power_on was called before phy_init Jun 30 04:54:11.629833 [ 4.901382] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 04:54:11.641702 [ 4.911494] phy phy-12130000.phy.2: phy_power_on was called before phy_init Jun 30 04:54:11.641737 [ 4.921826] exynos-ohci 12120000.usb: USB Host Controller Jun 30 04:54:11.653688 [ 4.935315] Synopsys Designware Multimedia Card Interface Driver Jun 30 04:54:11.665725 [ 4.942267] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 04:54:11.677682 [ 4.957517] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 04:54:11.689720 [ 4.958255] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Jun 30 04:54:11.701770 [ 4.969791] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Jun 30 04:54:11.701835 [ 5.007694] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 30 04:54:11.737713 [ 5.007828] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 30 04:54:11.749751 [ 5.024412] SCSI subsystem initialized Jun 30 04:54:11.761750 [ 5.027568] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 30 04:54:11.761814 [ 5.033154] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 30 04:54:11.773755 [ 5.038650] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 30 04:54:11.773819 [ 5.044948] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 30 04:54:11.785751 [ 5.050556] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Jun 30 04:54:11.785815 [ 5.057725] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Jun 30 04:54:11.797688 [ 5.078029] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo Jun 30 04:54:11.821714 [ 5.091171] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 04:54:11.821777 [ 5.102293] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 109,32 bit host data width,128 deep fifo Jun 30 04:54:11.845697 [ 5.133385] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Jun 30 04:54:11.869775 [ 5.133865] mmc_host mmc0: card is polling. Jun 30 04:54:11.869833 [ 5.140224] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 04:54:11.881769 [ 5.151581] usb usb1: Product: USB Host Controller Jun 30 04:54:11.881828 [ 5.156354] usb usb1: Manufacturer: Linux 6.1.0-22-armmp-lpae ohci_hcd Jun 30 04:54:11.893837 [ 5.162861] usb usb1: SerialNumber: 12120000.usb Jun 30 04:54:11.893897 [ 5.169710] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 04:54:11.910000 [ 5.197697] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 04:54:11.933763 [ 5.210961] hub 1-0:1.0: USB hub found Jun 30 04:54:11.945738 [ 5.219428] hub 1-0:1.0: 3 ports detected Jun 30 04:54:11.957697 [ 5.225853] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 04:54:11.957761 [ 5.232704] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 04:54:11.969778 [ 5.239909] usb usb2: Product: EHCI Host Controller Jun 30 04:54:11.969837 [ 5.244748] usb usb2: Manufacturer: Linux 6.1.0-22-armmp-lpae ehci_hcd Jun 30 04:54:11.981760 [ 5.251241] usb usb2: SerialNumber: 12110000.usb Jun 30 04:54:11.981819 [ 5.298975] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 04:54:12.041690 [ 5.320475] mmc1: new high speed SDHC card at address aaaa Jun 30 04:54:12.053730 [ 5.348946] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 30 04:54:12.089747 [ 5.359852] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 30 04:54:12.101763 [ 5.366121] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Jun 30 04:54:12.101854 [ 5.374084] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 30 04:54:12.113743 [ 5.378041] hub 2-0:1.0: USB hub found Jun 30 04:54:12.113800 [ 5.387761] mmc0: new DDR MMC card at address 0001 Jun 30 04:54:12.125735 [ 5.389065] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 30 04:54:12.125804 [ 5.403333] hub 2-0:1.0: 3 ports detected Jun 30 04:54:12.137726 [ 5.407167] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Jun 30 04:54:12.137786 [ 5.428398] mmcblk0: p1 p2 p3 p4 Jun 30 04:54:12.161735 [ 5.433902] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 30 04:54:12.173765 [ 5.434267] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Jun 30 04:54:12.173826 [ 5.439581] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Jun 30 04:54:12.185799 [ 5.453314] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 30 04:54:12.197720 [ 5.465558] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Jun 30 04:54:12.197781 [ 5.482232] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (241:0) Jun 30 04:54:12.221687 [ 5.501438] scsi host0: ahci-dwc Jun 30 04:54:12.233788 [ 5.504706] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 110 Jun 30 04:54:12.249645 [ 5.783861] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 04:54:12.517822 [ 5.857135] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 04:54:12.590035 [ 5.981703] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 30 04:54:12.721753 [ 5.987278] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 30 04:54:12.721817 [ 5.991019] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 04:54:12.733777 [ 5.993116] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 30 04:54:12.733839 [ 6.009930] ata1.00: configured for UDMA/133 Jun 30 04:54:12.745769 [ 6.014404] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 30 04:54:12.745837 [ 6.037323] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 04:54:12.769761 [ 6.041404] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 04:54:12.781747 [ 6.051257] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Jun 30 04:54:12.793729 [ 6.059280] xhci-hcd xhci-hcd.2.auto: irq 111, io mem 0x12000000 Jun 30 04:54:12.793787 [ 6.065387] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 04:54:12.805711 [ 6.070693] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 04:54:12.805774 [ 6.078317] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 04:54:12.817688 [ 6.084986] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 04:54:12.817722 [ 6.093067] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 04:54:12.829701 [ 6.100258] usb usb3: Product: xHCI Host Controller Jun 30 04:54:12.829751 [ 6.102604] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 04:54:12.841745 [ 6.105120] usb usb3: Manufacturer: Linux 6.1.0-22-armmp-lpae xhci-hcd Jun 30 04:54:12.853740 [ 6.121000] usb usb3: SerialNumber: xhci-hcd.2.auto Jun 30 04:54:12.853794 [ 6.127060] hub 3-0:1.0: USB hub found Jun 30 04:54:12.853838 [ 6.129605] hub 3-0:1.0: 1 port detected Jun 30 04:54:12.865717 [ 6.134681] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 04:54:12.865779 [ 6.142520] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Jun 30 04:54:12.877720 [ 6.149832] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 04:54:12.889737 [ 6.157022] usb usb4: Product: xHCI Host Controller Jun 30 04:54:12.889818 [ 6.161890] usb usb4: Manufacturer: Linux 6.1.0-22-armmp-lpae xhci-hcd Jun 30 04:54:12.901739 [ 6.168393] usb usb4: SerialNumber: xhci-hcd.2.auto Jun 30 04:54:12.901793 [ 6.175988] hub 4-0:1.0: USB hub found Jun 30 04:54:12.913691 [ 6.178447] hub 4-0:1.0: 1 port detected Jun 30 04:54:12.913757 [ 6.214209] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 30 04:54:12.949832 [ 6.220271] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 30 04:54:12.949887 [ 6.225729] sd 0:0:0:0: [sda] Write Protect is off Jun 30 04:54:12.961752 [ 6.230337] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 04:54:12.973796 [ 6.239690] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 30 04:54:12.973895 [ 6.248743] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 30 04:54:12.985794 [ 6.275966] sda: sda1 sda2 < sda5 > Jun 30 04:54:13.009785 [ 6.278892] sd 0:0:0:0: [sda] Attached SCSI disk Jun 30 04:54:13.009845 [ 6.403760] I/O error, dev mmcblk1, sector 7743714 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 2 Jun 30 04:54:13.141791 [ 6.689681] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 04:54:13.429783 [ 6.760287] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 04:54:13.501715 [ 6.874396] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 04:54:13.609693 [ 6.981999] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 04:54:13.717733 [ 7.089603] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 04:54:13.825721 [ 7.197195] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 04:54:13.933783 [ 7.204704] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 04:54:13.945669 [ 7.297659] random: crng init done Jun 30 04:54:14.029695 [ 7.406895] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. Jun 30 04:54:14.149666 [ 7.417816] device-mapper: uevent: version 1.0.3 Jun 30 04:54:14.149698 [ 7.422451] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Jun 30 04:54:14.161621 Begin: Loading essential drivers ... done. Jun 30 04:54:14.929632 Begin: Running /scripts/init-premount ... done. Jun 30 04:54:17.941674 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 30 04:54:17.993112 Begin: Running /scripts/local-premount ... done. Jun 30 04:54:17.993187 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 30 04:54:18.037620 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 30 04:54:18.121684 /dev/mapper/arndale--metrocentre--vg-root: clean, 39331/1220608 files, 377984/4882432 blocks Jun 30 04:54:18.385733 done. Jun 30 04:54:18.397691 [ 11.787287] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 30 04:54:18.529703 [ 12.061858] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. Jun 30 04:54:18.805723 done. Jun 30 04:54:18.805775 Begin: Running /scripts/local-bottom ... done. Jun 30 04:54:18.853750 Begin: Running /scripts/init-bottom ... done. Jun 30 04:54:18.901694 [ 12.387885] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. Jun 30 04:54:19.129710 INIT: version 3.06 booting Jun 30 04:54:19.489680 INIT: No inittab.d directory found Jun 30 04:54:19.597670 Using makefile-style concurrent boot in runlevel S. Jun 30 04:54:19.945663 Starting hotplug events dispatcher: systemd-udevd. Jun 30 04:54:21.721703 Synthesizing the initial hotplug events (subsystems)...done. Jun 30 04:54:21.973691 Synthesizing the initial hotplug events (devices)...done. Jun 30 04:54:22.489764 Waiting for /dev to be fully populated...[ 16.021772] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 04:54:22.765610 [ 16.085776] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 30 04:54:22.825804 [ 16.126187] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jun 30 04:54:22.861752 [ 16.293682] usb3503 usb-hub: switched to HUB mode Jun 30 04:54:23.029805 [ 16.296936] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 04:54:23.029890 [ 16.306147] panfrost 11800000.gpu: clock rate = 533000000 Jun 30 04:54:23.041768 [ 16.345673] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 04:54:23.089740 [ 16.397186] panfrost 11800000.gpu: mali-t600 id 0x600 major 0x0 minor 0x0 status 0x1 Jun 30 04:54:23.137837 [ 16.403504] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,31b4dfff Jun 30 04:54:23.149788 [ 16.411687] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 Jun 30 04:54:23.161783 [ 16.423368] panfrost 11800000.gpu: shader_present=0xf l2_present=0x1 Jun 30 04:54:23.161847 [ 16.431396] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 0 Jun 30 04:54:23.173715 [ 16.445490] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 04:54:23.185753 [ 16.580543] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 04:54:23.317786 [ 16.618145] usb 2-3: new high-speed USB device number 2 using exynos-ehci Jun 30 04:54:23.353726 [ 16.691292] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 04:54:23.437673 [ 16.786703] usb 2-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Jun 30 04:54:23.521744 [ 16.793588] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jun 30 04:54:23.533749 [ 16.800903] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 04:54:23.545717 [ 16.823774] hub 2-3:1.0: USB hub found Jun 30 04:54:23.557755 [ 16.827080] hub 2-3:1.0: 3 ports detected Jun 30 04:54:23.557815 [ 16.991049] I/O error, dev mmcblk1, sector 7743714 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 2 Jun 30 04:54:23.737679 [ 17.119310] OF: graph: no port node found in /soc/hdmi@14530000 Jun 30 04:54:23.857701 [ 17.146562] usb 2-3.2: new high-speed USB device number 3 using exynos-ehci Jun 30 04:54:23.881727 [ 17.268587] usb 2-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=77.32 Jun 30 04:54:24.013743 [ 17.275700] usb 2-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Jun 30 04:54:24.013813 [ 17.283085] usb 2-3.2: Product: USB2.0 Hub Jun 30 04:54:24.025720 [ 17.287254] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 04:54:24.025793 [ 17.308812] hub 2-3.2:1.0: USB hub found Jun 30 04:54:24.049660 [ 17.312070] hub 2-3.2:1.0: 4 ports detected Jun 30 04:54:24.049720 [ 17.371557] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 04:54:24.109770 [ 17.486770] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 04:54:24.229691 [ 17.594591] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 04:54:24.337694 [ 17.629873] usb 2-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 30 04:54:24.373666 [ 17.702430] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 04:54:24.445692 [ 17.744189] usb 2-3.2.4: New USB device found, idVendor=0b95, idProduct=772a, bcdDevice= 0.01 Jun 30 04:54:24.481770 [ 17.751492] usb 2-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 30 04:54:24.493747 [ 17.759209] usb 2-3.2.4: Product: AX88772 Jun 30 04:54:24.493805 [ 17.762966] usb 2-3.2.4: Manufacturer: ASIX Elec. Corp. Jun 30 04:54:24.505715 [ 17.768171] usb 2-3.2.4: SerialNumber: 000001 Jun 30 04:54:24.505775 [ 17.810196] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 04:54:24.553719 [ 17.817885] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 04:54:24.553787 [ 18.485180] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 30 04:54:25.225718 [ 19.148297] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 04:54:25.897732 [ 19.163838] Asix Electronics AX88772A usb-002:004:10: attached PHY driver (mii_bus:phy_addr=usb-002:004:10, irq=POLL) Jun 30 04:54:25.909768 [ 19.175685] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 22:f2:76:37:cd:b6 Jun 30 04:54:25.921704 [ 19.193988] usbcore: registered new interface driver asix Jun 30 04:54:25.933752 done. Jun 30 04:54:26.281674 [ 19.976127] EXT4-fs (dm-0): re-mounted. Quota mode: none. Jun 30 04:54:26.713824 Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). Jun 30 04:54:26.749712 Checking file systems.../dev/sda1: clean, 922/61056 files, 25374/243968 blocks Jun 30 04:54:28.621678 done. Jun 30 04:54:28.669669 Cleaning up temporary files... /tmp. Jun 30 04:54:28.933694 [ 22.421927] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 30 04:54:29.161716 [ 22.473839] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Jun 30 04:54:29.209728 [ 22.711846] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k FS Jun 30 04:54:29.449721 Mounting local filesystems...done. Jun 30 04:54:29.857696 Activating swapfile swap, if any...done. Jun 30 04:54:29.857761 Cleaning up temporary files.... Jun 30 04:54:29.977700 Starting Setting kernel variables: sysctl. Jun 30 04:54:30.157674 [ 24.077871] audit: type=1400 audit(1719723270.976:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=897 comm="apparmor_parser" Jun 30 04:54:30.829728 [ 24.096597] audit: type=1400 audit(1719723270.976:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=897 comm="apparmor_parser" Jun 30 04:54:30.841761 [ 24.111576] audit: type=1400 audit(1719723270.992:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=896 comm="apparmor_parser" Jun 30 04:54:30.853780 [ 24.321323] asix 2-3.2.4:1.0 eth0: configuring for phy/internal link mode Jun 30 04:54:31.057722 [ 24.496071] audit: type=1400 audit(1719723271.392:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=938 comm="apparmor_parser" Jun 30 04:54:31.237841 [ 24.510230] audit: type=1400 audit(1719723271.396:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=938 comm="apparmor_parser" Jun 30 04:54:31.261832 [ 24.524523] audit: type=1400 audit(1719723271.396:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=938 comm="apparmor_parser" Jun 30 04:54:31.273718 [ 24.837945] audit: type=1400 audit(1719723271.736:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=935 comm="apparmor_parser" Jun 30 04:54:31.585772 [ 24.857723] audit: type=1400 audit(1719723271.736:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=935 comm="apparmor_parser" Jun 30 04:54:31.609742 [ 24.873587] audit: type=1400 audit(1719723271.740:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=935 comm="apparmor_parser" Jun 30 04:54:31.621758 [ 24.891120] audit: type=1400 audit(1719723271.748:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=935 comm="apparmor_parser" Jun 30 04:54:31.645689 Starting: AppArmorLoading AppArmor profiles...done. Jun 30 04:54:31.645751 . Jun 30 04:54:31.645791 [ 26.471218] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 30 04:54:33.213764 [ 26.477283] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jun 30 04:54:33.213834 Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1 Jun 30 04:54:34.173793 Copyright 2004-2022 Internet Systems Consortium. Jun 30 04:54:34.185782 All rights reserved. Jun 30 04:54:34.185840 For info, please visit https://www.isc.org/software/dhcp/ Jun 30 04:54:34.185929 Jun 30 04:54:34.185972 Listening on LPF/eth0/9e:04:00:59:64:5a Jun 30 04:54:34.197807 Sending on LPF/eth0/9e:04:00:59:64:5a Jun 30 04:54:34.197866 Sending on Socket/fallback Jun 30 04:54:34.197909 Created duid "\000\001\000\001.\023\241\207\236\004\000YdZ". Jun 30 04:54:34.209680 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 Jun 30 04:54:34.209714 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 Jun 30 04:54:34.209740 DHCPOFFER of 10.149.64.44 from 10.149.64.4 Jun 30 04:54:34.221680 DHCPREQUEST for 10.149.64.44 on eth0 to 255.255.255.255 port 67 Jun 30 04:54:34.221714 DHCPACK of 10.149.64.44 from 10.149.64.4 Jun 30 04:54:34.233637 bound to 10.149.64.44 -- renewal in 263 seconds. Jun 30 04:54:34.233670 done. Jun 30 04:54:34.233692 Cleaning up temporary files.... Jun 30 04:54:34.245625 Starting nftables: none Jun 30 04:54:34.401631 . Jun 30 04:54:34.881745 INIT: Entering runlevel: 2 Jun 30 04:54:34.953706 Using makefile-style concurrent boot in runlevel 2. Jun 30 04:54:35.001730 Starting Apache httpd web server: apache2[ 29.406636] exynos4-fb 14400000.fimd: deferred probe timeout, ignoring dependency Jun 30 04:54:36.145801 [ 29.414561] exynos-mixer 14450000.mixer: deferred probe timeout, ignoring dependency Jun 30 04:54:36.157742 [ 29.421601] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations Jun 30 04:54:36.157810 [ 29.428536] exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm]) Jun 30 04:54:36.169748 [ 29.436426] exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm]) Jun 30 04:54:36.181750 [ 29.444549] exynos-drm exynos-drm: bound 14500000.dsi (ops hdmi_enable [exynosdrm]) Jun 30 04:54:36.181830 [ 29.451716] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm]) Jun 30 04:54:36.193669 [ 29.464897] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Jun 30 04:54:36.205738 [ 29.470178] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Jun 30 04:54:36.205802 [ 29.477327] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 Jun 30 04:54:36.217717 . Jun 30 04:54:37.169713 Starting NTP server: ntpd2024-06-30T04:54:37 ntpd[1137]: INIT: ntpd ntpsec-1.2.2: Starting Jun 30 04:54:37.565781 2024-06-30T04:54:37 ntpd[1137]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 30 04:54:37.577736 . Jun 30 04:54:37.577787 Starting periodic command scheduler: cron. Jun 30 04:54:37.769758 Starting system message bus: dbus. Jun 30 04:54:38.081733 Starting OpenBSD Secure Shell server: sshd. Jun 30 04:54:38.801736 Jun 30 04:54:39.849698 Debian GNU/Linux 12 arndale-metrocentre ttySAC2 Jun 30 04:54:39.861709 Jun 30 04:54:39.861761 arndale-metrocentre login: INIT: Switching to r INIT: No initUsing makefile-style concurrent boot in runlevel 6. Jun 30 04:59:41.384619 Stopping SMP IRQ Balancer: irqbalance. Jun 30 04:59:41.456632 Stopping nftables: none. Jun 30 04:59:41.456632 Stopping hotplug events dispatcher: systemd-udevd. Jun 30 04:59:41.468615 Saving the system clock to /dev/rtc0. Jun 30 04:59:41.924795 Hardware Clock updated to Sun Jun 30 04:59:42 UTC 2024. Jun 30 04:59:41.924868 Stopping Apache httpd web server: apache2. Jun 30 04:59:42.624784 Asking all remaining processes to terminate...done. Jun 30 04:59:43.209770 All processes ended within 1 seconds...done. Jun 30 04:59:43.209770 Deconfiguring network interfaces...ifdown: ignoring unknown interface eth0=eth0 Jun 30 04:59:43.329807 done. Jun 30 04:59:43.329807 [ 336.822559] EXT4-fs (sda1): unmounting filesystem. Jun 30 04:59:43.557922 Deactivating swap...done. Jun 30 04:59:43.617768 Unmounting local filesystems...done. Jun 30 04:59:43.617770 [ 337.181020] EXT4-fs (dm-0): re-mounted. Quota mode: none. Jun 30 04:59:43.917750 Will now restart. Jun 30 04:59:44.265682 [ 337.558698] asix 2-3.2.4:1.0 eth0: Link is Down Jun 30 04:59:44.289724 [ 337.610360] sd 0:0:0:0: [sda] Synchronizing SCSI cache Jun 30 04:59:44.337745 [ 337.638391] wake enabled for irq 101 (gpx1-4) Jun 30 04:59:44.373806 [ 337.641275] wake enabled for irq 102 (gpx1-5) Jun 30 04:59:44.373806 [ 337.645640] wake enabled for irq 103 (gpx1-6) Jun 30 04:59:44.373844 [ 337.649970] wake enabled for irq 104 (gpx1-7) Jun 30 04:59:44.385786 [ 337.654309] wake enabled for irq 105 (gpx2-0) Jun 30 04:59:44.385786 [ 337.658649] wake enabled for irq 106 (gpx2-1) Jun 30 04:59:44.397700 [ 337.663514] reboot: Reó Jun 30 04:59:44.733748 Jun 30 04:59:44.733756 Jun 30 04:59:44.733820 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 04:59:44.733871 Jun 30 04:59:44.733908 CPU: Exynos5250@1000MHz Jun 30 04:59:44.733950 Jun 30 04:59:44.733986 Board: Arndale Jun 30 04:59:44.734026 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 04:59:44.745773 ready Jun 30 04:59:44.745773 DRAM: 2 GiB Jun 30 04:59:44.745813 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 04:59:44.757773 trace: enabled Jun 30 04:59:44.805624 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 04:59:45.165864 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 04:59:45.213763 In: serial Jun 30 04:59:45.225774 Out: serial Jun 30 04:59:45.225783 Err: serial Jun 30 04:59:45.225824 SCSI: ARNDALE SCSI INIT Jun 30 04:59:45.225866 Target spinup took 0 ms. Jun 30 04:59:45.225907 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 04:59:45.237808 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 04:59:45.237823 Net: Net Initialization Skipped Jun 30 04:59:45.249792 No ethernet found. Jun 30 04:59:45.249792 Hostname: arndale-metrocentre Jun 30 04:59:45.249818 Hit any key to stop autoboot: 2  1  0 Jun 30 04:59:47.173783 (Re)start USB... Jun 30 04:59:47.173992 USB0: USB EHCI 1.00 Jun 30 04:59:47.173992 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 04:59:52.773741 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 04:59:52.785612 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 04:59:53.229750 Waiting for Ethernet connection... done. Jun 30 04:59:54.873776 BOOTP broadcast 1 Jun 30 04:59:54.873845 BOOTP broadcast 2 Jun 30 04:59:57.649699 DHCP client bound to address 10.149.64.44 (2898 ms) Jun 30 04:59:57.661783 Using asx0 device Jun 30 04:59:57.661836 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 04:59:57.661884 Filename 'pxelinux.0'. Jun 30 04:59:57.673711 Load address: 0x43e00000 Jun 30 04:59:57.673766 Loading: *### Jun 30 04:59:57.685687 2.2 MiB/s Jun 30 04:59:57.685740 done Jun 30 04:59:57.685780 Bytes transferred = 42430 (a5be hex) Jun 30 04:59:57.697748 missing environment variable: pxeuuid Jun 30 04:59:57.697806 Retrieving file: pxelinux.cfg/0A95402C Jun 30 04:59:57.697851 Using asx0 device Jun 30 04:59:57.697891 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 04:59:57.709756 Filename 'pxelinux.cfg/0A95402C'. Jun 30 04:59:57.709813 Load address: 0x51000000 Jun 30 04:59:57.709855 Loading: *# Jun 30 04:59:57.709895 31.3 KiB/s Jun 30 04:59:57.709934 done Jun 30 04:59:57.721755 Bytes transferred = 65 (41 hex) Jun 30 04:59:57.721787 Config file found Jun 30 04:59:57.721809 Ignoring unknown command: serial Jun 30 04:59:57.721833 1: local Jun 30 04:59:57.721854 scanning bus for devices... Jun 30 04:59:57.721899 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 04:59:57.757744 Type: Hard Disk Jun 30 04:59:57.757800 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 04:59:57.757849 Found 1 device(s). Jun 30 04:59:57.757890 Jun 30 04:59:57.769941 SCSI device 0: Jun 30 04:59:57.769998 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 04:59:57.770049 Type: Hard Disk Jun 30 04:59:57.770091 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 04:59:57.781774 ... is now current device Jun 30 04:59:57.781830 Scanning scsi 0... Jun 30 04:59:57.781872 Found U-Boot script /boot.scr Jun 30 04:59:57.961619 1768 bytes read in 39 ms (43.9 KiB/s) Jun 30 04:59:58.009630 ## Executing script at 50000000 Jun 30 04:59:58.009661 Loading dtbs/6.10.0-rc5+/exynos5250-arndale.dtb Jun 30 04:59:58.009687 46641 bytes read in 1245 ms (36.1 KiB/s) Jun 30 04:59:59.221715 983052 bytes read in 103 ms (9.1 MiB/s) Jun 30 04:59:59.353745 Loaded xen-4.19-unstable to 0x41000000 (f000c) Jun 30 04:59:59.353804 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan Jun 30 04:59:59.365715 10785280 bytes read in 504 ms (20.4 MiB/s) Jun 30 04:59:59.869730 Loaded vmlinuz-6.10.0-rc5+ to 0x42000000 (a49200) Jun 30 04:59:59.869795 command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 04:59:59.893680 12142292 bytes read in 519 ms (22.3 MiB/s) Jun 30 05:00:00.409878 Loaded initrd.img-6.10.0-rc5+ to 0x43300000 (b946d4) Jun 30 05:00:00.421796 chosen { Jun 30 05:00:00.421849 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan"; Jun 30 05:00:00.433771 #size-cells = <0x00000001>; Jun 30 05:00:00.433828 #address-cells = <0x00000001>; Jun 30 05:00:00.433871 stdout-path = "serial2:115200n8"; Jun 30 05:00:00.445775 module@1 { Jun 30 05:00:00.445829 reg = <0x43300000 0x00b946d4>; Jun 30 05:00:00.445872 compatible = "xen,linux-initrd", "xen,multiboot-module"; Jun 30 05:00:00.445920 }; Jun 30 05:00:00.445957 module@0 { Jun 30 05:00:00.445996 bootargs = "ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Jun 30 05:00:00.469778 reg = <0x42000000 0x00a49200>; Jun 30 05:00:00.469834 compatible = "xen,linux-zimage", "xen,multiboot-module"; Jun 30 05:00:00.481809 }; Jun 30 05:00:00.481838 }; Jun 30 05:00:00.481859 Booting 0x41000000 - 0x43000000 Jun 30 05:00:00.481911 Kernel image @ 0x41000000 [ 0x000000 - 0x12f000 ] Jun 30 05:00:00.481956 ## Flattened Device Tree blob at 43000000 Jun 30 05:00:00.493886 Booting using the fdt blob at 0x43000000 Jun 30 05:00:00.493918 reserving fdt memory region: addr=43000000 size=c000 Jun 30 05:00:00.493997 Loading Device Tree to 4fff1000, end 4fffffff ... OK Jun 30 05:00:00.505722 Jun 30 05:00:00.505773 Starting kernel ...(fake run for tracing) Jun 30 05:00:00.505818 Jun 30 05:00:00.505855 Jun 30 05:00:00.517694 Starting kernel ... Jun 30 05:00:00.517751 Jun 30 05:00:00.517789 __ __ _ _ _ ___ _ _ _ Jun 30 05:00:00.565759 \ \/ /___ _ __ | || | / |/ _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Jun 30 05:00:00.565821 \ // _ \ '_ \ | || |_ | | (_) |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Jun 30 05:00:00.577762 / \ __/ | | | |__ _|| |\__, |__| |_| | | | \__ \ || (_| | |_) | | __/ Jun 30 05:00:00.589747 /_/\_\___|_| |_| |_|(_)_| /_/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Jun 30 05:00:00.589809 Jun 30 05:00:00.589848 (XEN) Xen version 4.19-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Sun Jun 30 01:52:15 UTC 2024 Jun 30 05:00:00.601778 (XEN) Latest ChangeSet: Wed Jun 26 16:07:30 2024 +0100 git:08f9b1dd9c Jun 30 05:00:00.613771 (XEN) build-id: a1f1bc3a5986d3ec30239a56d95725b8f32801f2 Jun 30 05:00:00.613832 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Jun 30 05:00:00.625764 (XEN) 32-bit Execution: Jun 30 05:00:00.625832 (XEN) Processor Features: 00001031:00011011 Jun 30 05:00:00.625903 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Jun 30 05:00:00.637779 (XEN) Extensions: GenericTimer Security Jun 30 05:00:00.637843 (XEN) Debug Features: 02010555 Jun 30 05:00:00.637924 (XEN) Auxiliary Features: 00000000 Jun 30 05:00:00.637971 (XEN) Memory Model Features: 10201105 20000000 Jun 30 05:00:00.649764 (XEN) 01240000 02102211 Jun 30 05:00:00.649823 (XEN) ISA Features: 02101110 13112111 21232041 Jun 30 05:00:00.661776 (XEN) 11112131 10011142 00000000 Jun 30 05:00:00.661805 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Jun 30 05:00:00.673757 (XEN) Set SYSRAM to 0000000041000074 (00200074) Jun 30 05:00:00.673816 (XEN) SMP: Allowing 2 CPUs Jun 30 05:00:00.673859 (XEN) enabled workaround for: ARM erratum 766422 Jun 30 05:00:00.685762 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Jun 30 05:00:00.685824 (XEN) GICv2 initialization: Jun 30 05:00:00.685867 (XEN) gic_dist_addr=0000000010481000 Jun 30 05:00:00.697768 (XEN) gic_cpu_addr=0000000010482000 Jun 30 05:00:00.697826 (XEN) gic_hyp_addr=0000000010484000 Jun 30 05:00:00.697870 (XEN) gic_vcpu_addr=0000000010486000 Jun 30 05:00:00.709787 (XEN) gic_maintenance_irq=25 Jun 30 05:00:00.709807 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Jun 30 05:00:00.709856 (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2) Jun 30 05:00:00.721756 (XEN) Initializing Credit2 scheduler Jun 30 05:00:00.721813 (XEN) load_precision_shift: 18 Jun 30 05:00:00.721856 (XEN) load_window_shift: 30 Jun 30 05:00:00.733750 (XEN) underload_balance_tolerance: 0 Jun 30 05:00:00.733808 (XEN) overload_balance_tolerance: -3 Jun 30 05:00:00.733853 (XEN) runqueues arrangement: socket Jun 30 05:00:00.733896 (XEN) cap enforcement granularity: 10ms Jun 30 05:00:00.745771 (XEN) load tracking window length 1073741824 ns Jun 30 05:00:00.745830 (XEN) Allocated console ring of 16 KiB. Jun 30 05:00:00.745875 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Jun 30 05:00:00.757768 (XEN) CPU0: Guest atomics will try 1 times before pausing the domain Jun 30 05:00:00.757831 (XEN) Bringing up CPU1 Jun 30 05:00:00.769761 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Jun 30 05:00:00.769825 (XEN) Brought up 2 CPUs Jun 30 05:00:00.769867 (XEN) CPU 1 booted. Jun 30 05:00:00.769907 (XEN) I/O virtualisation disabled Jun 30 05:00:00.781762 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Jun 30 05:00:00.781823 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Jun 30 05:00:00.781870 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Jun 30 05:00:00.793771 (XEN) Initializing Credit2 scheduler Jun 30 05:00:00.793829 (XEN) load_precision_shift: 18 Jun 30 05:00:00.793873 (XEN) load_window_shift: 30 Jun 30 05:00:00.805771 (XEN) underload_balance_tolerance: 0 Jun 30 05:00:00.805829 (XEN) overload_balance_tolerance: -3 Jun 30 05:00:00.805873 (XEN) runqueues arrangement: socket Jun 30 05:00:00.805916 (XEN) cap enforcement granularity: 10ms Jun 30 05:00:00.817725 (XEN) load tracking window length 1073741824 ns Jun 30 05:00:00.817785 (XEN) Adding cpu 0 to runqueue 0 Jun 30 05:00:00.817828 (XEN) First cpu on runqueue, activating Jun 30 05:00:00.829760 (XEN) Adding cpu 1 to runqueue 0 Jun 30 05:00:00.829818 (XEN) alternatives: Patching with alt table 002c2f84 -> 002c305c Jun 30 05:00:00.829868 (XEN) CPU0 will execute ICIALLU on guest exit Jun 30 05:00:00.841748 (XEN) CPU1 will execute ICIALLU on guest exit Jun 30 05:00:00.841806 (XEN) *** LOADING DOMAIN 0 *** Jun 30 05:00:00.841849 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Jun 30 05:00:00.853653 (XEN) Loading ramdisk from boot module @ 0000000043300000 Jun 30 05:00:00.853685 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Jun 30 05:00:00.865688 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Jun 30 05:00:01.417728 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Jun 30 05:00:01.429723 (XEN) Allocating PPI 16 for event channel interrupt Jun 30 05:00:01.453738 (XEN) d0: extended regions not supported for 32-bit guests Jun 30 05:00:01.465721 (XEN) Loading zImage from 0000000042000000 to 0000000067400000-0000000067e49200 Jun 30 05:00:01.465756 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d946d4 Jun 30 05:00:01.573706 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b499 Jun 30 05:00:01.669761 (XEN) Initial low memory virq threshold set at 0x4000 pages. Jun 30 05:00:01.669823 (XEN) Scrubbing Free RAM in background Jun 30 05:00:01.681750 (XEN) Std. Loglevel: All Jun 30 05:00:01.681805 (XEN) Guest Loglevel: All Jun 30 05:00:01.681848 (XEN) *************************************************** Jun 30 05:00:01.681892 (XEN) WARNING: SILO mode is not enabled. Jun 30 05:00:01.693746 (XEN) It has implications on the security of the system, Jun 30 05:00:01.693807 (XEN) unless the communications have been forbidden between Jun 30 05:00:01.705749 (XEN) untrusted domains. Jun 30 05:00:01.705804 (XEN) *************************************************** Jun 30 05:00:01.705851 (XEN) 3... 2... 1... Jun 30 05:00:04.708599 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 30 05:00:04.720625 (XEN) Freed 352kB init memory. Jun 30 05:00:04.720625 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 05:00:05.848583 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Jun 30 05:00:05.872653 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Jun 30 05:00:05.872653 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Jun 30 05:00:05.888637 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Jun 30 05:00:05.888637 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 05:00:05.900580 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 05:00:05.936859 [ 0.000000] Linux version 6.10.0-rc5+ (osstest@himrod0) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Sun Jun 30 01:19:39 UTC 2024 Jun 30 05:00:05.948661 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 30 05:00:05.960655 [ 0.000000] CPU: div instructions available: patching division code Jun 30 05:00:05.960655 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 05:00:05.972680 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 05:00:05.984652 [ 0.000000] Memory policy: Data cache writealloc Jun 30 05:00:05.984652 [ 0.000000] Xen 4.19 support found Jun 30 05:00:05.984652 [ 0.000000] efi: UEFI not found. Jun 30 05:00:05.996650 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 on node -1 Jun 30 05:00:05.996650 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 05:00:05.996650 [ 0.000000] Zone ranges: Jun 30 05:00:06.008751 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Jun 30 05:00:06.008765 [ 0.000000] Normal empty Jun 30 05:00:06.008765 [ 0.000000] HighMem empty Jun 30 05:00:06.020693 [ 0.000000] Movable zone start for each node Jun 30 05:00:06.020693 [ 0.000000] Early memory node ranges Jun 30 05:00:06.020693 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Jun 30 05:00:06.032650 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Jun 30 05:00:06.032650 [ 0.000000] psci: probing for conduit method from DT. Jun 30 05:00:06.044660 [ 0.000000] psci: PSCIv1.1 detected in firmware. Jun 30 05:00:06.044660 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Jun 30 05:00:06.056652 [ 0.000000] psci: Trusted OS migration not required Jun 30 05:00:06.056652 [ 0.000000] psci: SMC Calling Convention v1.2 Jun 30 05:00:06.056652 [ 0.000000] percpu: Embedded 18 pages/cpu s41428 r8192 d24108 u73728 Jun 30 05:00:06.068672 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 05:00:06.080659 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 05:00:06.092657 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Jun 30 05:00:06.104651 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 131072 Jun 30 05:00:06.104651 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Jun 30 05:00:06.116781 [ 0.000000] Memory: 414600K/524288K available (15360K kernel code, 2268K rwdata, 6084K rodata, 2048K init, 439K bss, 44152K reserved, 65536K cma-reserved, 0K highmem) Jun 30 05:00:06.128680 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 05:00:06.140655 [ 0.000000] trace event string verifier disabled Jun 30 05:00:06.140655 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 05:00:06.140655 [ 0.000000] rcu: RCU event tracing is enabled. Jun 30 05:00:06.152654 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Jun 30 05:00:06.152654 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Jun 30 05:00:06.164826 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 05:00:06.176673 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 05:00:06.176673 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 05:00:06.188672 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 05:00:06.188672 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Jun 30 05:00:06.200654 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 05:00:06.212649 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 05:00:06.212649 [ 0.000013] Switching to timer-based delay loop, resolution 41ns Jun 30 05:00:06.224675 [ 0.000548] Console: colour dummy device 80x30 Jun 30 05:00:06.224675 [ 0.000566] printk: legacy console [hvc0] enabled Jun 30 05:00:06.236670 [ 0.299563] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Jun 30 05:00:06.236670 [ 0.309961] CPU: Testing write buffer coherency: ok Jun 30 05:00:06.248662 [ 0.314902] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 05:00:06.260653 [ 0.324456] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 05:00:06.260653 [ 0.330887] pid_max: default: 32768 minimum: 301 Jun 30 05:00:06.272643 [ 0.335654] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 05:00:06.272643 [ 0.342937] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 05:00:06.284586 [ 0.351356] /cpus/cpu@0 missing clock-frequency property Jun 30 05:00:06.284586 [ 0.356139] /cpus/cpu@1 missing clock-frequency property Jun 30 05:00:06.296622 [ 0.361532] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 05:00:06.296857 [ 0.368256] xen:grant_table: Grant tables using version 1 layout Jun 30 05:00:06.308616 [ 0.373390] Grant table initialized Jun 30 05:00:06.308616 [ 0.376944] xen:events: Using FIFO-based ABI Jun 30 05:00:06.308616 [ 0.381242] Xen: initializing cpu0 Jun 30 05:00:06.320737 [ 0.384767] Setting up static identity map for 0x60300000 - 0x603000ac Jun 30 05:00:06.320737 [ 0.392536] rcu: Hierarchical SRCU implementation. Jun 30 05:00:06.332589 [ 0.396161] rcu: Max phase no-delay instances is 1000. Jun 30 05:00:06.332589 [ 0.404375] EFI services will not be available. Jun 30 05:00:06.344572 [ 0.407692] smp: Bringing up secondary CPUs ... Jun 30 05:00:06.344572 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 05:00:06.416618 [ 0.482003] Xen: initializing cpu1 Jun 30 05:00:06.416618 [ 0.482163] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 05:00:06.428629 [ 0.482187] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 05:00:06.428629 [ 0.501160] smp: Brought up 1 node, 2 CPUs Jun 30 05:00:06.440604 [ 0.504817] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 05:00:06.440604 [ 0.511103] CPU: All CPU(s) started in SVC mode. Jun 30 05:00:06.452742 [ 0.517006] devtmpfs: initialized Jun 30 05:00:06.452807 [ 0.529382] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 05:00:06.464775 [ 0.535940] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Jun 30 05:00:06.476796 [ 0.545610] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 05:00:06.488787 [ 0.553519] pinctrl core: initialized pinctrl subsystem Jun 30 05:00:06.488841 [ 0.560139] DMI not present or invalid. Jun 30 05:00:06.488887 [ 0.563655] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 05:00:06.500781 [ 0.570272] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 05:00:06.512744 [ 0.579592] thermal_sys: Registered thermal governor 'step_wise' Jun 30 05:00:06.512801 [ 0.579749] software IO TLB: area num 2. Jun 30 05:00:06.524768 [ 0.588422] software IO TLB: only able to allocate 8 MB Jun 30 05:00:06.524822 [ 0.595494] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Jun 30 05:00:06.536677 [ 0.600695] No ATAGs? Jun 30 05:00:06.536677 [ 0.603001] hw-breakpoint: Failed to enable monitor mode on CPU 0. Jun 30 05:00:06.536677 [ 0.611699] Serial: AMBA PL011 UART driver Jun 30 05:00:06.548771 [ 0.658327] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 65 Jun 30 05:00:06.596756 [ 0.686816] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 30 05:00:06.620781 [ 0.710720] xen:balloon: Initialising balloon driver Jun 30 05:00:06.644750 [ 0.717160] iommu: Default domain type: Translated Jun 30 05:00:06.656811 [ 0.720575] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 05:00:06.656875 [ 0.729365] SCSI subsystem initialized Jun 30 05:00:06.668749 [ 0.732131] usbcore: registered new interface driver usbfs Jun 30 05:00:06.668812 [ 0.737364] usbcore: registered new interface driver hub Jun 30 05:00:06.668860 [ 0.742703] usbcore: registered new device driver usb Jun 30 05:00:06.680672 [ 0.749429] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 05:00:06.680672 [ 0.753017] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 05:00:06.692670 [ 0.759273] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 05:00:06.692670 [ 0.764337] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 05:00:06.704785 [ 0.769266] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 05:00:06.704853 [ 0.775306] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 05:00:06.716676 [ 0.781081] pps_core: LinuxPPS API ver. 1 registered Jun 30 05:00:06.716676 [ 0.785475] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 05:00:06.728682 [ 0.794702] PTP clock support registered Jun 30 05:00:06.728682 [ 0.798935] EDAC MC: Ver: 3.0.0 Jun 30 05:00:06.728682 [ 0.802198] scmi_core: SCMI protocol bus registered Jun 30 05:00:06.740616 [ 0.808885] vgaarb: loaded Jun 30 05:00:06.740616 [ 0.812167] clocksource: Switched to clocksource arch_sys_counter Jun 30 05:00:06.752571 [ 0.829192] NET: Registered PF_INET protocol family Jun 30 05:00:06.764605 [ 0.832848] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Jun 30 05:00:06.776612 [ 0.840733] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 05:00:06.776612 [ 0.848452] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 05:00:06.788751 [ 0.856234] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Jun 30 05:00:06.800613 [ 0.864070] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Jun 30 05:00:06.800613 [ 0.871345] TCP: Hash tables configured (established 4096 bind 4096) Jun 30 05:00:06.812618 [ 0.877722] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 05:00:06.812618 [ 0.884289] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 05:00:06.824607 [ 0.891384] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 05:00:06.824607 [ 0.897550] RPC: Registered named UNIX socket transport module. Jun 30 05:00:06.836598 [ 0.903023] RPC: Registered udp transport module. Jun 30 05:00:06.836598 [ 0.907776] RPC: Registered tcp transport module. Jun 30 05:00:06.848604 [ 0.912574] RPC: Registered tcp-with-tls transport module. Jun 30 05:00:06.848604 [ 0.918125] RPC: Registered tcp NFSv4.1 backchannel transport module. Jun 30 05:00:06.860629 [ 0.924637] PCI: CLS 0 bytes, default 64 Jun 30 05:00:06.860629 [ 0.930041] Initialise system trusted keyrings Jun 30 05:00:06.860629 [ 0.933360] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Jun 30 05:00:06.872599 [ 0.939880] squashfs: version 4.0 (2009/01/31) Phillip Lougher Jun 30 05:00:06.872599 [ 0.945758] NFS: Registering the id_resolver key type Jun 30 05:00:06.885039 [ 0.950684] Key type id_resolver registered Jun 30 05:00:06.885039 [ 0.954924] Key type id_legacy registered Jun 30 05:00:06.896820 [ 0.959028] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Jun 30 05:00:06.896869 [ 0.965783] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Jun 30 05:00:06.912671 [ 0.973496] Trying to unpack rootfs image as initramfs... Jun 30 05:00:06.912671 [ 0.994947] Key type asymmetric registered Jun 30 05:00:06.924556 [ 0.997683] Asymmetric key parser 'x509' registered Jun 30 05:00:06.936682 [ 1.002747] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) Jun 30 05:00:06.936778 [ 1.010096] io scheduler mq-deadline registered Jun 30 05:00:06.948751 [ 1.014715] io scheduler kyber registered Jun 30 05:00:06.948751 [ 1.018822] io scheduler bfq registered Jun 30 05:00:06.948751 [ 1.160215] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 05:00:07.092592 [ 1.166468] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 05:00:07.104676 [ 1.220547] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 05:00:07.152763 [ 1.226807] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 05:00:07.164803 [ 1.255076] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 05:00:07.188821 [ 1.261321] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 05:00:07.200747 [ 1.312399] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 05:00:07.248859 [ 1.318634] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 05:00:07.260751 [ 1.331378] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 05:00:07.272583 [ 1.393787] xen:xen_evtchn: Event-channel device installed Jun 30 05:00:07.324561 [ 1.468045] Freeing initrd memory: 11860K Jun 30 05:00:07.400766 [ 1.493260] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 05:00:07.424819 [ 1.504270] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 05:00:07.448799 [ 1.512470] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 05:00:07.448868 [ 1.521337] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 05:00:07.460793 [ 1.530373] SuperH (H)SCI(F) driver initialized Jun 30 05:00:07.460866 [ 1.534703] STMicroelectronics ASC driver initialized Jun 30 05:00:07.472810 [ 1.539528] STM32 USART driver initialized Jun 30 05:00:07.472871 [ 1.544969] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 05:00:07.484745 [ 1.553878] random: crng init done Jun 30 05:00:07.484798 [ 1.561358] brd: module loaded Jun 30 05:00:07.496724 [ 1.567281] loop: module loaded Jun 30 05:00:07.496777 [ 1.582859] Invalid max_queues (4), will use default max: 2. Jun 30 05:00:07.520791 [ 1.601485] tun: Universal TUN/TAP device driver, 1.6 Jun 30 05:00:07.532814 [ 1.605358] CAN device driver interface Jun 30 05:00:07.544773 [ 1.610474] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Jun 30 05:00:07.544896 [ 1.621686] xen_netfront: Initialising Xen virtual ethernet driver Jun 30 05:00:07.556826 [ 1.626558] pegasus: Pegasus/Pegasus II USB Ethernet driver Jun 30 05:00:07.568745 [ 1.632181] usbcore: registered new interface driver pegasus Jun 30 05:00:07.568835 [ 1.637908] usbcore: registered new interface driver asix Jun 30 05:00:07.580838 [ 1.643378] usbcore: registered new interface driver ax88179_178a Jun 30 05:00:07.580878 [ 1.649517] usbcore: registered new interface driver cdc_ether Jun 30 05:00:07.592839 [ 1.655437] usbcore: registered new interface driver smsc75xx Jun 30 05:00:07.592906 [ 1.661239] usbcore: registered new interface driver smsc95xx Jun 30 05:00:07.604718 [ 1.667064] usbcore: registered new interface driver net1080 Jun 30 05:00:07.604797 [ 1.672792] usbcore: registered new interface driver cdc_subset Jun 30 05:00:07.604797 [ 1.678769] usbcore: registered new interface driver zaurus Jun 30 05:00:07.616660 [ 1.684427] usbcore: registered new interface driver cdc_ncm Jun 30 05:00:07.616660 [ 1.693790] usbcore: registered new interface driver usb-storage Jun 30 05:00:07.628646 [ 1.704303] i2c_dev: i2c /dev entries driver Jun 30 05:00:07.640617 [ 1.722684] device-mapper: uevent: version 1.0.3 Jun 30 05:00:07.652616 [ 1.726102] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev Jun 30 05:00:07.664723 [ 1.735717] cpu cpu0: OPP table can't be empty Jun 30 05:00:07.676802 [ 1.740428] failed to register cpuidle driver Jun 30 05:00:07.676888 [ 1.743832] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Jun 30 05:00:07.688825 [ 1.752175] sdhci: Secure Digital Host Controller Interface driver Jun 30 05:00:07.688890 [ 1.757175] sdhci: Copyright(c) Pierre Ossman Jun 30 05:00:07.688919 [ 1.765240] sdhci-pltfm: SDHCI platform and OF driver helper Jun 30 05:00:07.700823 [ 1.782212] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 05:00:07.712784 [ 1.787659] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Jun 30 05:00:07.724827 [ 1.794358] usbcore: registered new interface driver usbhid Jun 30 05:00:07.736743 [ 1.799015] usbhid: USB HID core driver Jun 30 05:00:07.736849 [ 1.809961] NET: Registered PF_INET6 protocol family Jun 30 05:00:07.748860 [ 1.814393] Segment Routing with IPv6 Jun 30 05:00:07.749572 [ 1.817314] In-situ OAM (IOAM) with IPv6 Jun 30 05:00:07.749648 [ 1.821342] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Jun 30 05:00:07.760831 [ 1.827826] NET: Registered PF_PACKET protocol family Jun 30 05:00:07.760892 [ 1.832459] can: controller area network core Jun 30 05:00:07.776852 [ 1.836849] NET: Registered PF_CAN protocol family Jun 30 05:00:07.776915 [ 1.841678] can: raw protocol Jun 30 05:00:07.776958 [ 1.844734] can: broadcast manager protocol Jun 30 05:00:07.777003 [ 1.848992] can: netlink gateway - max_hops=1 Jun 30 05:00:07.788759 [ 1.853733] Key type dns_resolver registered Jun 30 05:00:07.788819 [ 1.858415] ThumbEE CPU extension supported. Jun 30 05:00:07.788866 [ 1.862082] Registering SWP/SWPB emulation handler Jun 30 05:00:07.800622 [ 1.876523] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level Jun 30 05:00:07.812665 [ 1.883433] Loading compiled-in X.509 certificates Jun 30 05:00:07.824584 [ 1.926636] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 05:00:07.860588 [ 1.930234] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 05:00:07.872548 [ 1.937172] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 05:00:07.872548 [ 1.945033] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 05:00:07.884569 [ 1.986451] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 05:00:07.920539 [ 1.995305] s5m-rtc s5m-rtc: setting system clock to 2024-06-30T05:00:09 UTC (1719723609) Jun 30 05:00:07.932586 [ 2.006444] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 05:00:07.944606 [ 2.011057] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 05:00:07.944606 [ 2.015495] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 05:00:07.956745 [ 2.022267] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 05:00:07.956812 [ 2.028054] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 05:00:07.965739 [ 2.034304] clk: Not disabling unused clocks Jun 30 05:00:07.965799 [ 2.037734] PM: genpd: Disabling unused power domains Jun 30 05:00:07.977740 [ 2.046312] Freeing unused kernel image (initmem) memory: 2048K Jun 30 05:00:07.977802 [ 2.052652] Run /init as init process Jun 30 05:00:07.989703 Loading, please wait... Jun 30 05:00:08.013706 Starting systemd-udevd version 252.26-1~deb12u2 Jun 30 05:00:08.085703 [ 3.303318] i2c-gpio i2c-10: using lines 552 (SDA) and 553 (SCL) Jun 30 05:00:09.237734 [ 3.482993] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 05:00:09.417667 [ 3.527018] phy phy-12130000.phy.5: phy_power_on was called before phy_init Jun 30 05:00:09.465675 [ 3.532687] exynos-ohci 12120000.usb: USB Host Controller Jun 30 05:00:09.465736 [ 3.538125] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Jun 30 05:00:09.477687 [ 3.547240] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 Jun 30 05:00:09.489581 [ 3.622920] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 05:00:09.561732 [ 3.633515] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 05:00:09.573712 [ 3.669560] Synopsys Designware Multimedia Card Interface Driver Jun 30 05:00:09.609629 [ 3.678299] hub 1-0:1.0: USB hub found Jun 30 05:00:09.609686 [ 3.686789] hub 1-0:1.0: 3 ports detected Jun 30 05:00:09.621634 [ 3.693112] phy phy-12130000.phy.5: phy_power_on was called before phy_init Jun 30 05:00:09.633654 [ 3.698713] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 05:00:09.633709 [ 3.704350] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Jun 30 05:00:09.645621 [ 3.737117] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 Jun 30 05:00:09.669621 [ 3.749627] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 30 05:00:09.681627 [ 3.758943] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 30 05:00:09.693649 [ 3.764662] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 05:00:09.705683 [ 3.783991] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 30 05:00:09.717722 [ 3.789082] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 30 05:00:09.729729 [ 3.794692] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo Jun 30 05:00:09.741723 [ 3.806358] mmc_host mmc0: card is polling. Jun 30 05:00:09.741783 [ 3.810160] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 30 05:00:09.741835 [ 3.815727] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 30 05:00:09.753734 [ 3.821206] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 127,32 bit host data width,128 deep fifo Jun 30 05:00:09.765719 [ 3.830994] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 05:00:09.765782 [ 3.835920] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 05:00:09.777632 [ 3.880709] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 05:00:09.825735 [ 3.893237] hub 2-0:1.0: USB hub found Jun 30 05:00:09.825795 [ 3.895661] hub 2-0:1.0: 3 ports detected Jun 30 05:00:09.825841 [ 3.903522] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 30 05:00:09.837725 [ 3.909789] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 30 05:00:09.849741 [ 3.917246] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 30 05:00:09.861660 [ 3.940234] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Jun 30 05:00:09.873691 [ 3.952184] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 30 05:00:09.885725 [ 3.957896] ahci-dwc 122f0000.sata: AHCI vers 0001.0300, 32 command slots, 6 Gbps, platform mode Jun 30 05:00:09.897745 [ 3.967103] ahci-dwc 122f0000.sata: 1/1 ports implemented (port mask 0x1) Jun 30 05:00:09.909668 [ 3.973926] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 30 05:00:09.909741 [ 4.019434] s3c-rtc 101e0000.rtc: registered as rtc1 Jun 30 05:00:09.957671 [ 4.024519] scsi host0: ahci-dwc Jun 30 05:00:09.957728 [ 4.027460] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 129 lpm-pol 0 Jun 30 05:00:09.969709 [ 4.041527] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 30 05:00:09.981704 [ 4.063675] mmc0: new DDR MMC card at address 0001 Jun 30 05:00:09.993690 [ 4.073368] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Jun 30 05:00:10.005701 [ 4.079677] mmcblk0: p1 p2 p3 p4 Jun 30 05:00:10.017729 [ 4.081778] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 05:00:10.017802 [ 4.093701] mmc1: new high speed SDHC card at address aaaa Jun 30 05:00:10.029724 [ 4.100903] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Jun 30 05:00:10.041681 [ 4.105368] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Jun 30 05:00:10.041742 [ 4.112513] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Jun 30 05:00:10.053690 [ 4.118640] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Jun 30 05:00:10.053754 [ 4.532238] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 30 05:00:10.473728 [ 4.538032] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 30 05:00:10.473794 [ 4.543866] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 30 05:00:10.485741 [ 4.551528] ata1.00: configured for UDMA/133 Jun 30 05:00:10.485800 [ 4.555141] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 30 05:00:10.497733 [ 4.564995] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 30 05:00:10.497801 [ 4.571169] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 30 05:00:10.509682 [ 4.577378] sd 0:0:0:0: [sda] Write Protect is off Jun 30 05:00:10.509742 [ 4.581936] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 30 05:00:10.521756 [ 4.591498] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 30 05:00:10.533609 [ 4.624952] sda: sda1 sda2 < sda5 > Jun 30 05:00:10.557651 [ 4.627892] sd 0:0:0:0: [sda] Attached SCSI disk Jun 30 05:00:10.569613 [ 4.652313] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Jun 30 05:00:10.593717 [ 4.660018] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 05:00:10.593780 [ 4.664226] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 05:00:10.605664 [ 4.730880] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002000010 Jun 30 05:00:10.665815 [ 4.744280] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Jun 30 05:00:10.677754 [ 4.751837] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 05:00:10.689788 [ 4.756095] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 05:00:10.689827 [ 4.763866] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 05:00:10.701754 [ 4.771284] hub 3-0:1.0: USB hub found Jun 30 05:00:10.701807 [ 4.774265] hub 3-0:1.0: 1 port detected Jun 30 05:00:10.713752 [ 4.778941] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 05:00:10.713817 [ 4.787278] hub 4-0:1.0: USB hub found Jun 30 05:00:10.725702 [ 4.790203] hub 4-0:1.0: 1 port detected Jun 30 05:00:10.725755 [ 4.871428] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 05:00:10.809756 [ 5.041694] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 05:00:10.977849 [ 5.177216] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 05:00:11.121775 [ 5.285406] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 05:00:11.229660 [ 5.393680] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 05:00:11.337770 [ 5.501861] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 05:00:11.445784 [ 5.662242] I/O error, dev mmcblk1, sector 7743712 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 Jun 30 05:00:11.604786 [ 5.783650] I/O error, dev mmcblk1, sector 7743714 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 Jun 30 05:00:11.724765 [ 5.891725] I/O error, dev mmcblk1, sector 7743715 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 Jun 30 05:00:11.832734 [ 6.172210] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 05:00:12.115006 [ 6.342662] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 05:00:12.284554 [ 6.457023] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 05:00:12.392755 [ 6.564780] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 05:00:12.500790 [ 6.672540] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 05:00:12.612637 [ 6.780259] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 05:00:12.720782 Begin: Loading essential drivers ... done. Jun 30 05:00:12.768591 Begin: Running /scripts/init-premount ... done. Jun 30 05:00:15.772353 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 30 05:00:15.784396 Begin: Running /scripts/local-premount ... done. Jun 30 05:00:15.796412 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 30 05:00:15.868322 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 30 05:00:15.988353 /dev/mapper/arndale--metrocentre--vg-root: clean, 46073/1220608 files, 606040/4882432 blocks Jun 30 05:00:16.240464 done. Jun 30 05:00:16.264525 [ 10.335799] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 30 05:00:16.276599 [ 10.733016] EXT4-fs (dm-0): mounted filesystem 1d31c9f9-82ea-4299-9775-53c807dac037 ro with ordered data mode. Quota mode: disabled. Jun 30 05:00:16.672706 done. Jun 30 05:00:16.672748 Begin: Running /scripts/local-bottom ... done. Jun 30 05:00:16.720451 Begin: Running /scripts/init-bottom ... done. Jun 30 05:00:16.756575 INIT: version 3.06 booting Jun 30 05:00:17.276618 INIT: No inittab.d directory found Jun 30 05:00:17.376614 Using makefile-style concurrent boot in runlevel S. Jun 30 05:00:17.680414 Starting hotplug events dispatcher: systemd-udevd. Jun 30 05:00:19.388546 Synthesizing the initial hotplug events (subsystems)...done. Jun 30 05:00:19.836424 Synthesizing the initial hotplug events (devices)...done. Jun 30 05:00:20.676396 Waiting for /dev to be fully populated...[ 14.829231] usb3503 usb-hub: switched to HUB mode Jun 30 05:00:20.760428 [ 14.832622] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 05:00:20.772406 [ 14.920386] s5p-secss 10830000.sss: s5p-sss driver registered Jun 30 05:00:20.856422 [ 14.970700] mc: Linux media interface: v0.10 Jun 30 05:00:20.904392 [ 14.986516] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 30 05:00:20.928402 [ 15.110208] videodev: Linux video capture interface: v2.00 Jun 30 05:00:21.048410 [ 15.192196] usb 2-3: new high-speed USB device number 2 using exynos-ehci Jun 30 05:00:21.132407 [ 15.301624] s5p-mfc 11000000.codec: Adding to iommu group 0 Jun 30 05:00:21.240410 [ 15.315889] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Jun 30 05:00:21.252642 [ 15.353593] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 05:00:21.288405 [ 15.361494] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 05:00:21.300428 [ 15.370468] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 05:00:21.312514 [ 15.476434] s5p-mfc 11000000.codec: decoder registered as /dev/video0 Jun 30 05:00:21.408530 [ 15.478151] hub 2-3:1.0: USB hub found Jun 30 05:00:21.420459 [ 15.485678] hub 2-3:1.0: 3 ports detected Jun 30 05:00:21.420459 [ 15.488816] s5p-mfc 11000000.codec: encoder registered as /dev/video1 Jun 30 05:00:21.432376 [ 15.683925] exynos-gsc 13e00000.gsc: Adding to iommu group 1 Jun 30 05:00:21.616393 [ 15.690379] exynos-gsc 13e10000.gsc: Adding to iommu group 2 Jun 30 05:00:21.628364 [ 15.717398] exynos-gsc 13e20000.gsc: Adding to iommu group 3 Jun 30 05:00:21.652401 [ 15.727042] exynos-gsc 13e30000.gsc: Adding to iommu group 4 Jun 30 05:00:21.664413 [ 15.728398] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 05:00:21.676356 [ 15.772856] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Jun 30 05:00:21.712418 [ 15.823067] usb 2-3.2: new high-speed USB device number 3 using exynos-ehci Jun 30 05:00:21.760387 [ 15.847741] wm8994 3-001a: Device is not a WM8994, ID is 0 Jun 30 05:00:21.784315 [ 15.888123] wm8994 3-001a: probe with driver wm8994 failed with error -22 Jun 30 05:00:21.820403 [ 15.905176] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 05:00:21.844399 [ 16.012859] hub 2-3.2:1.0: USB hub found Jun 30 05:00:21.952382 [ 16.023555] hub 2-3.2:1.0: 4 ports detected Jun 30 05:00:21.952382 [ 16.044941] blk_print_req_error: 1 callbacks suppressed Jun 30 05:00:21.976531 [ 16.044955] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 05:00:21.988435 [ 16.158973] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 05:00:22.096455 [ 16.268390] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 05:00:22.204611 [ 16.352237] usb 2-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 30 05:00:22.288571 [ 16.376693] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 05:00:22.312653 [ 16.461297] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 05:00:22.396654 [ 16.468999] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 05:00:22.408649 [ 16.477699] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 05:00:22.420671 [ 16.491892] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 05:00:22.432641 [ 16.499575] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 05:00:22.444614 [ 16.508290] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 05:00:22.444689 [ 16.537868] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 30 05:00:22.480585 [ 16.815811] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 05:00:22.760468 [ 16.993149] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 05:00:22.928618 [ 17.107620] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 05:00:23.045677 [ 17.214005] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 05:00:23.153684 [ 17.224778] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 05:00:23.165751 [ 17.237125] Asix Electronics AX88772A usb-002:004:10: attached PHY driver (mii_bus:phy_addr=usb-002:004:10, irq=POLL) Jun 30 05:00:23.177712 [ 17.246997] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 36:67:d1:22:df:ca Jun 30 05:00:23.189649 [ 17.288215] usbcore: registered new device driver onboard-usb-dev Jun 30 05:00:23.225685 [ 17.295376] usb 2-3.2.4: USB disconnect, device number 4 Jun 30 05:00:23.225717 [ 17.299655] asix 2-3.2.4:1.0 eth0: unregister 'asix' usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet Jun 30 05:00:23.237670 [ 17.333840] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 05:00:23.273636 [ 17.441575] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 05:00:23.381690 [ 17.449228] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 05:00:23.381727 [ 17.482987] hub 2-3.2:1.0: USB hub found Jun 30 05:00:23.417675 [ 17.485922] hub 2-3.2:1.0: 4 ports detected Jun 30 05:00:23.417707 [ 17.499124] hub 2-3.2:1.0: USB hub found Jun 30 05:00:23.429683 [ 17.502301] hub 2-3.2:1.0: 4 ports detected Jun 30 05:00:23.429715 [ 17.832247] usb 2-3.2.4: new high-speed USB device number 5 using exynos-ehci Jun 30 05:00:23.765730 [ 18.684291] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:005:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 05:00:24.629737 [ 18.699162] Asix Electronics AX88772A usb-002:005:10: attached PHY driver (mii_bus:phy_addr=usb-002:005:10, irq=POLL) Jun 30 05:00:24.641711 [ 18.709021] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 36:67:d1:22:df:ca Jun 30 05:00:24.653647 [ 18.810688] asix 2-3.2.4:1.0 enx3667d122dfca: renamed from eth0 Jun 30 05:00:24.749635 done. Jun 30 05:00:24.809665 [ 19.291926] EXT4-fs (dm-0): re-mounted 1d31c9f9-82ea-4299-9775-53c807dac037 r/w. Quota mode: disabled. Jun 30 05:00:25.229733 Checking file systems.../dev/sda1: clean, 2179/61056 files, 44463/243968 blocks Jun 30 05:00:26.877768 done. Jun 30 05:00:26.901680 Cleaning up temporary files... /tmp. Jun 30 05:00:27.081745 [ 21.370923] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 30 05:00:27.309751 [ 21.422810] EXT4-fs (sda1): mounted filesystem 9f708434-97f9-409d-bdc9-e3e330ed09a6 r/w with ordered data mode. Quota mode: disabled. Jun 30 05:00:27.357761 [ 21.523172] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k Jun 30 05:00:27.457709 Mounting local filesystems...done. Jun 30 05:00:27.705905 Activating swapfile swap, if any...done. Jun 30 05:00:27.717844 Cleaning up temporary files.... Jun 30 05:00:27.753700 Starting Setting kernel variables: sysctl. Jun 30 05:00:27.969687 Configuring network interfaces...RTNETLINK answers: Operation not supported Jun 30 05:00:28.692543 done. Jun 30 05:00:28.692543 Starting nftables: nonemnl.c:60: Unable to initialize Netlink socket: Protocol not supported Jun 30 05:00:29.001829 failed! Jun 30 05:00:29.013572 Cleaning up temporary files.... Jun 30 05:00:29.037616 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Jun 30 05:00:29.085618 startpar: service(s) returned failure: nftables ... failed! Jun 30 05:00:29.121568 INIT: Entering runlevel: 2 Jun 30 05:00:29.133551 Using makefile-style concurrent boot in runlevel 2. Jun 30 05:00:29.145633 Starting Apache httpd web server: apache2[ 27.534024] platform sound: deferred probe pending: arndale-audio: snd_soc_register_card() failed Jun 30 05:00:33.473754 AH00557: apache2: apr_sockaddr_info_get() failed for arndale-metrocentre Jun 30 05:00:54.989693 AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1. Set the 'ServerName' directive globally to suppress this message Jun 30 05:00:55.001651 . Jun 30 05:01:08.097782 Starting SMP IRQ Balancer: irqbalance. Jun 30 05:01:08.580706 Starting NTP server: ntpd2024-06-30T05:01:09 ntpd[1111]: INIT: ntpd ntpsec-1.2.2: Starting Jun 30 05:01:08.772636 2024-06-30T05:01:09 ntpd[1111]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 30 05:01:08.784605 . Jun 30 05:01:08.784633 Starting system message bus: dbus. Jun 30 05:01:09.352459 Starting OpenBSD Secure Shell server: sshd. Jun 30 05:01:10.044468 Starting /usr/local/sbin/xenstored... Jun 30 05:01:12.029674 Setting domain 0 name, domid and JSON config... Jun 30 05:01:12.029717 Done setting up Dom0 Jun 30 05:01:12.029741 Starting xenconsoled... Jun 30 05:01:12.041609 Starting QEMU as disk backend for dom0 Jun 30 05:01:12.041642 Jun 30 05:01:13.124546 Debian GNU/Linux 12 arndale-metrocentre hvc0 Jun 30 05:01:13.124546 Jun 30 05:01:13.136511 arndale-metrocentre login: INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 05:02:52.161660 Jun 30 05:06:45.316751 (XEN) *** Serial input to Xen (type 'CTRL-x' three times to switch input) Jun 30 05:06:45.341777 Jun 30 05:06:45.343118 Jun 30 05:06:46.316637 (XEN) '0' pressed -> dumping Dom0's registers Jun 30 05:06:46.341755 (XEN) *** Dumping Dom0 vcpu#0 state: *** Jun 30 05:06:46.341815 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Jun 30 05:06:46.343857 Not tainted ]---- Jun 30 05:06:46.353748 (XEN) CPU: 0 Jun 30 05:06:46.353800 (XEN) PC: c031be28 Jun 30 05:06:46.353843 (XEN) CPSR: 60070093 MODE:32-bit Guest SVC Jun 30 05:06:46.353890 (XEN) R0: 00000005 R1: 00000000 R2: 00031b51 R3: c031be20 Jun 30 05:06:46.365762 (XEN) R4: c1b09d40 R5: c1d26f50 R6: c1b04e5c R7: c1b04e98 Jun 30 05:06:46.365824 (XEN) R8: 00000000 R9: 00000000 R10:000000ad R11:00000000 R12:c1d264a0 Jun 30 05:06:46.377759 (XEN) USR: SP: beb14960 LR: b6de4685 Jun 30 05:06:46.377817 (XEN) SVC: SP: c1b01f78 LR: c114e078 SPSR:60070013 Jun 30 05:06:46.377865 (XEN) ABT: SP: c1d38b10 LR: c0300ec0 SPSR:60030193 Jun 30 05:06:46.389760 (XEN) UND: SP: c1d38b20 LR: c0300fc0 SPSR:60070093 Jun 30 05:06:46.389820 (XEN) IRQ: SP: c1d38b00 LR: c0300bc0 SPSR:60070193 Jun 30 05:06:46.401753 (XEN) FIQ: SP: c1d38b30 LR: c1d38b30 SPSR:00000000 Jun 30 05:06:46.401813 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Jun 30 05:06:46.401869 (XEN) Jun 30 05:06:46.413739 (XEN) SCTLR: 10c5387d Jun 30 05:06:46.413797 (XEN) TCR: 00000000 Jun 30 05:06:46.413841 (XEN) TTBR0: 00000000670cc06a Jun 30 05:06:46.413884 (XEN) TTBR1: 000000006020406a Jun 30 05:06:46.413980 (XEN) IFAR: b6fa3c34, IFSR: 00000007 Jun 30 05:06:46.425773 (XEN) DFAR: b6ef3abc, DFSR: 0000081f Jun 30 05:06:46.425834 (XEN) Jun 30 05:06:46.425873 (XEN) VTCR_EL2: 80003558 Jun 30 05:06:46.425915 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 05:06:46.437772 (XEN) Jun 30 05:06:46.437824 (XEN) SCTLR_EL2: 30cd187f Jun 30 05:06:46.437868 (XEN) HCR_EL2: 007c663f Jun 30 05:06:46.437910 (XEN) TTBR0_EL2: 0000000041107000 Jun 30 05:06:46.437952 (XEN) Jun 30 05:06:46.437989 (XEN) ESR_EL2: 07e00000 Jun 30 05:06:46.449771 (XEN) HPFAR_EL2: 00104810 Jun 30 05:06:46.449828 (XEN) HDFAR: e0807f00 Jun 30 05:06:46.449871 (XEN) HIFAR: c0d9e04c Jun 30 05:06:46.449912 (XEN) Jun 30 05:06:46.449950 (XEN) Guest stack trace from sp=c1b01f78: Jun 30 05:06:46.461686 (XEN) Failed to convert stack to physical address Jun 30 05:06:46.461686 [ 400.532190] d(XEN) *** Dumping Dom0 vcpu#1 state: *** Jun 30 05:06:46.461686 wmmc_exynos 1220(XEN) ----[ Xen-4.19-unstable arm32 debug=y Not tainted ]---- Jun 30 05:06:46.473671 (XEN) CPU: 0 Jun 30 05:06:46.473671 (XEN) PC: c0308008 Jun 30 05:06:46.473671 (XEN) CPSR: 600e0193 MODE:32-bit Guest SVC Jun 30 05:06:46.485769 (XEN) R0: 00000000 R1: deadbeef R2: deadbeef R3: c0a3ba24 Jun 30 05:06:46.485836 (XEN) R4: 00000010 R5: 00000010 R6: 00000027 R7: e0805cc0 Jun 30 05:06:46.497674 (XEN) R8: 00000000 R9: 00000020 R10:00000000 R11:c1cba0c8 R12:deadbeef Jun 30 05:06:46.497674 (XEN) USR: SP: beab8938 LR: b6c03853 Jun 30 05:06:46.497674 (XEN) SVC: SP: e0805c88 LR: c0a3ba3c SPSR:600e0013 Jun 30 05:06:46.509685 (XEN) ABT: SP: c1d38b50 LR: c0300ec0 SPSR:60030193 Jun 30 05:06:46.509685 (XEN) UND: SP: c1d38b60 LR: c0300fc0 SPSR:600e0093 Jun 30 05:06:46.509685 (XEN) IRQ: SP: c1d38b40 LR: c0300bc0 SPSR:600e0193 Jun 30 05:06:46.521672 (XEN) FIQ: SP: c1d38b70 LR: c1d38b70 SPSR:00000000 Jun 30 05:06:46.521672 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Jun 30 05:06:46.533672 (XEN) Jun 30 05:06:46.533672 (XEN) SCTLR: 10c5387d Jun 30 05:06:46.533672 (XEN) TCR: 00000000 Jun 30 05:06:46.533672 (XEN) TTBR0: 000000006696006a Jun 30 05:06:46.545669 (XEN) TTBR1: 000000006020406a Jun 30 05:06:46.545669 (XEN) IFAR: b6e7e0e4, IFSR: 00000007 Jun 30 05:06:46.545669 (XEN) DFAR: 00479ffc, DFSR: 00000817 Jun 30 05:06:46.545669 (XEN) Jun 30 05:06:46.545669 (XEN) VTCR_EL2: 80003558 Jun 30 05:06:46.557673 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 05:06:46.557673 (XEN) Jun 30 05:06:46.557673 (XEN) SCTLR_EL2: 30cd187f Jun 30 05:06:46.557673 (XEN) HCR_EL2: 007c663f Jun 30 05:06:46.557673 (XEN) TTBR0_EL2: 0000000041107000 Jun 30 05:06:46.569730 (XEN) Jun 30 05:06:46.569730 (XEN) ESR_EL2: 4a000ea1 Jun 30 05:06:46.569730 (XEN) HPFAR_EL2: 00104810 Jun 30 05:06:46.569730 (XEN) HDFAR: e0807f00 Jun 30 05:06:46.569730 (XEN) HIFAR: c0d9e04c Jun 30 05:06:46.581604 (XEN) Jun 30 05:06:46.581604 (XEN) Guest stack trace from sp=e0805c88: Jun 30 05:06:46.581604 (XEN) Failed to convert stack to physical address Jun 30 05:06:46.581604 0000.mmc: Unexpected interrupt latency Jun 30 05:06:46.593532 Jun 30 05:06:48.324542 (XEN) 'H' pressed -> dumping heap info (now = 407782854125) Jun 30 05:06:48.345834 (XEN) heap[node=0][zone=0] -> 16284 pages Jun 30 05:06:48.345893 (XEN) heap[node=0][zone=1] -> 0 Jun 30 05:06:48.348119 pages Jun 30 05:06:48.357723 (XEN) heap[node=0][zone=2] -> 0 pages Jun 30 05:06:48.357779 (XEN) heap[node=0][zone=3] -> 0 pages Jun 30 05:06:48.357824 (XEN) heap[node=0][zone=4] -> 0 pages Jun 30 05:06:48.357867 (XEN) heap[node=0][zone=5] -> 0 pages Jun 30 05:06:48.369762 (XEN) heap[node=0][zone=6] -> 0 pages Jun 30 05:06:48.369820 (XEN) heap[node=0][zone=7] -> 0 pages Jun 30 05:06:48.369864 (XEN) heap[node=0][zone=8] -> 0 pages Jun 30 05:06:48.381738 (XEN) heap[node=0][zone=9] -> 0 pages Jun 30 05:06:48.381823 (XEN) heap[node=0][zone=10] -> 0 pages Jun 30 05:06:48.381871 (XEN) heap[node=0][zone=11] -> 0 pages Jun 30 05:06:48.381914 (XEN) heap[node=0][zone=12] -> 0 pages Jun 30 05:06:48.393741 (XEN) heap[node=0][zone=13] -> 0 pages Jun 30 05:06:48.393799 (XEN) heap[node=0][zone=14] -> 0 pages Jun 30 05:06:48.393843 (XEN) heap[node=0][zone=15] -> 0 pages Jun 30 05:06:48.405766 (XEN) heap[node=0][zone=16] -> 0 pages Jun 30 05:06:48.405825 (XEN) heap[node=0][zone=17] -> 0 pages Jun 30 05:06:48.405869 (XEN) heap[node=0][zone=18] -> 0 pages Jun 30 05:06:48.405911 (XEN) heap[node=0][zone=19] -> 130833 pages Jun 30 05:06:48.417748 (XEN) heap[node=0][zone=20] -> 241626 pages Jun 30 05:06:48.417806 (XEN) heap[node=0][zone=21] -> 0 pages Jun 30 05:06:48.417851 (XEN) heap[node=0][zone=22] -> 0 pages Jun 30 05:06:48.429744 (XEN) heap[node=0][zone=23] -> 0 pages Jun 30 05:06:48.429802 (XEN) heap[node=0][zone=24] -> 0 pages Jun 30 05:06:48.429846 (XEN) heap[node=0][zone=25] -> 0 pages Jun 30 05:06:48.441628 (XEN) heap[node=0][zone=26] -> 0 pages Jun 30 05:06:48.441661 (XEN) heap[node=0][zone=27] -> 0 pages Jun 30 05:06:48.441686 (XEN) heap[node=0][zone=28] -> 0 pages Jun 30 05:06:48.441709 Jun 30 05:06:50.332510 Jun 30 05:06:52.090193 Jun 30 05:06:52.336895 Jun 30 05:06:54.097120 Jun 30 05:06:54.334717 (XEN) Dumping timer queues: Jun 30 05:06:54.360731 (XEN) CPU00: Jun 30 05:06:54.360761 (XEN) ex= 50852us timer=43fef968 cb=vtimer.c#virt_timer_expired(43fef960) Jun 30 05:06:54.360791 (XEN) CPU0 Jun 30 05:06:54.362497 1: Jun 30 05:06:54.370907 (XEN) ex= 433608us timer=43fdc968 cb=vtimer.c#virt_timer_expired(43fdc960) Jun 30 05:06:54.370970 Jun 30 05:06:56.320032 Jun 30 05:06:58.106546 Jun 30 05:06:58.348583 (XEN) 'd' pressed -> dumping registers Jun 30 05:06:58.364792 (XEN) Jun 30 05:06:58.364792 (XEN) *** Dumping CPU0 host state: *** Jun 30 05:06:58.364792 (XEN) ----[ Xen-4.19-unstable arm32 debug=y N Jun 30 05:06:58.366898 ot tainted ]---- Jun 30 05:06:58.376614 (XEN) CPU: 0 Jun 30 05:06:58.376614 (XEN) PC: 0025ef7c domain.c#idle_loop+0x130/0x1ac Jun 30 05:06:58.376614 (XEN) CPSR: 6007005a MODE:Hypervisor Jun 30 05:06:58.376614 (XEN) R0: 00000000 R1: 0029f300 R2: 00000000 R3: 00000000 Jun 30 05:06:58.388844 (XEN) R4: 00000000 R5: 002f80e0 R6: 0032b324 R7: 00000001 Jun 30 05:06:58.388953 (XEN) R8: 0032b104 R9: 00000000 R10:40e00000 R11:4003ff54 R12:fffffffc Jun 30 05:06:58.397961 (XEN) HYP: SP: 4003ff44 LR: 00225cb8 Jun 30 05:06:58.397969 (XEN) Jun 30 05:06:58.397969 (XEN) VTCR_EL2: 80003558 Jun 30 05:06:58.416884 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 05:06:58.416986 (XEN) Jun 30 05:06:58.417028 (XEN) SCTLR_EL2: 30cd187f Jun 30 05:06:58.417073 (XEN) HCR_EL2: 007c663f Jun 30 05:06:58.417116 (XEN) TTBR0_EL2: 0000000041107000 Jun 30 05:06:58.417159 (XEN) Jun 30 05:06:58.417195 (XEN) ESR_EL2: 07e00000 Jun 30 05:06:58.417237 (XEN) HPFAR_EL2: 00104810 Jun 30 05:06:58.428761 (XEN) HDFAR: e0807f00 Jun 30 05:06:58.428865 (XEN) HIFAR: c0d9e04c Jun 30 05:06:58.428908 (XEN) Jun 30 05:06:58.428957 (XEN) Xen stack trace from sp=4003ff44: Jun 30 05:06:58.428973 (XEN) 07e00000 00295014 002919ac 4003ff4c 00267818 00000000 00000000 00000000 Jun 30 05:06:58.440656 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 05:06:58.452788 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 05:06:58.452812 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 05:06:58.464798 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 05:06:58.464901 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 05:06:58.476789 (XEN) Xen call trace: Jun 30 05:06:58.476889 (XEN) [<0025ef7c>] domain.c#idle_loop+0x130/0x1ac (PC) Jun 30 05:06:58.476933 (XEN) [<00225cb8>] rcu_needs_cpu+0x40/0x60 (LR) Jun 30 05:06:58.488874 (XEN) [<00267818>] arch_get_xen_caps+0/0x90 Jun 30 05:06:58.488931 (XEN) Jun 30 05:06:58.488931 (XEN) *** Dumping CPU1 host state: *** Jun 30 05:06:58.489016 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Not tainted ]---- Jun 30 05:06:58.500850 (XEN) CPU: 1 Jun 30 05:06:58.500900 (XEN) PC: 0025ef7c domain.c#idle_loop+0x130/0x1ac Jun 30 05:06:58.500943 (XEN) CPSR: 600f005a MODE:Hypervisor Jun 30 05:06:58.512800 (XEN) R0: 00000000 R1: 0029f300 R2: 3fd0e000 R3: 00000000 Jun 30 05:06:58.512904 (XEN) R4: 00000001 R5: 002f80e0 R6: 0032b324 R7: 00000002 Jun 30 05:06:58.524897 (XEN) R8: 0032b104 R9: 00000001 R10:40e00000 R11:4000ff54 R12:fffffffc Jun 30 05:06:58.524965 (XEN) HYP: SP: 4000ff44 LR: 00225cb8 Jun 30 05:06:58.536672 (XEN) Jun 30 05:06:58.536672 (XEN) VTCR_EL2: 80003558 Jun 30 05:06:58.536672 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 05:06:58.536672 (XEN) Jun 30 05:06:58.536672 (XEN) SCTLR_EL2: 30cd187f Jun 30 05:06:58.536672 (XEN) HCR_EL2: 007c663f Jun 30 05:06:58.548655 (XEN) TTBR0_EL2: 00000000ba004000 Jun 30 05:06:58.548655 (XEN) Jun 30 05:06:58.548655 (XEN) ESR_EL2: 07e00000 Jun 30 05:06:58.548655 (XEN) HPFAR_EL2: 00104810 Jun 30 05:06:58.548655 (XEN) HDFAR: e0807f00 Jun 30 05:06:58.548655 (XEN) HIFAR: c0ac9320 Jun 30 05:06:58.560657 (XEN) Jun 30 05:06:58.560657 (XEN) Xen stack trace from sp=4000ff44: Jun 30 05:06:58.560657 (XEN) 07e00000 002f9290 00000001 4000ff3c 002680f4 00000000 00000000 00000000 Jun 30 05:06:58.572657 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 05:06:58.572657 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 05:06:58.584661 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 05:06:58.584661 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 05:06:58.596644 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 05:06:58.596644 (XEN) Xen call trace: Jun 30 05:06:58.608657 (XEN) [<0025ef7c>] domain.c#idle_loop+0x130/0x1ac (PC) Jun 30 05:06:58.608657 (XEN) [<00225cb8>] rcu_needs_cpu+0x40/0x60 (LR) Jun 30 05:06:58.608657 (XEN) [<002680f4>] start_secondary+0x204/0x20c Jun 30 05:06:58.620531 (XEN) Jun 30 05:06:58.620589 Jun 30 05:07:00.351485 (XEN) 'e' pressed -> dumping event-channel info Jun 30 05:07:00.365821 (XEN) Event channel information for domain 0: Jun 30 05:07:00.365875 (XEN) Polling vCPUs: {} Jun 30 05:07:00.365918 (XEN) port Jun 30 05:07:00.368204 [p/m/s] Jun 30 05:07:00.377721 (XEN) 1 [0/0/ - ]: s=3 n=1 x=0 d=0 p=4 Jun 30 05:07:00.377778 (XEN) 2 [0/0/ - ]: s=5 n=0 x=0 v=2 Jun 30 05:07:00.377824 (XEN) 3 [0/0/ - ]: s=5 n=1 x=0 v=3 Jun 30 05:07:00.389711 (XEN) 4 [0/0/ - ]: s=3 n=0 x=0 d=0 p=1 Jun 30 05:07:00.389776 Jun 30 05:07:02.357268 (XEN) gnttab_usage_print_all [ key 'g' pressed Jun 30 05:07:02.381807 (XEN) -------- active -------- -------- shared -------- Jun 30 05:07:02.381874 (XEN) [ref] localdo Jun 30 05:07:02.384202 m mfn pin localdom gmfn flags Jun 30 05:07:02.393718 (XEN) grant-table for remote d0 (v1) Jun 30 05:07:02.393749 (XEN) 1 frames (64 max), 0 maptrack frames (1024 max) Jun 30 05:07:02.405754 (XEN) no active grant table entries Jun 30 05:07:02.405812 (XEN) gnttab_usage_print_all ] done Jun 30 05:07:02.405856 Jun 30 05:07:04.356020 Jun 30 05:07:06.120036 Jun 30 05:07:06.381534 (XEN) Physical memory information: Jun 30 05:07:06.405797 (XEN) Xen heap: 65136kB free Jun 30 05:07:06.405859 (XEN) heap[19]: 523332kB free Jun 30 05:07:06.405903 (XEN) heap[20]: 966504kB fr Jun 30 05:07:06.408209 ee Jun 30 05:07:06.417658 (XEN) Dom heap: 1489836kB free Jun 30 05:07:06.417713 Jun 30 05:07:08.379407 Jun 30 05:07:10.129597 Jun 30 05:07:10.366324 (XEN) sched_smt_power_savings: disabled Jun 30 05:07:10.389784 (XEN) NOW=429827081416 Jun 30 05:07:10.389841 (XEN) Online Cpus: 0-1 Jun 30 05:07:10.390018 (XEN) Cpupool 0: Jun 30 05:07:10.390063 (XEN) Cpus: 0-1 Jun 30 05:07:10.390107 (XEN) Schedu Jun 30 05:07:10.392338 ling granularity: cpu, 1 CPU per sched-resource Jun 30 05:07:10.401704 (XEN) Scheduler: SMP Credit Scheduler rev2 (credit2) Jun 30 05:07:10.401736 (XEN) Active queues: 1 Jun 30 05:07:10.401759 (XEN) default-weight = 256 Jun 30 05:07:10.413802 (XEN) Runqueue 0: Jun 30 05:07:10.413857 (XEN) ncpus = 2 Jun 30 05:07:10.413900 (XEN) cpus = 0-1 Jun 30 05:07:10.413941 (XEN) max_weight = 256 Jun 30 05:07:10.413982 (XEN) pick_bias = 0 Jun 30 05:07:10.425752 (XEN) instload = 0 Jun 30 05:07:10.425808 (XEN) aveload = 928 (~0%) Jun 30 05:07:10.425852 (XEN) idlers: 2 Jun 30 05:07:10.425893 (XEN) tickled: 0 Jun 30 05:07:10.425933 (XEN) fully idle cores: 2 Jun 30 05:07:10.437742 (XEN) Domain info: Jun 30 05:07:10.437797 (XEN) Domain: 0 w 256 c 0 v 2 Jun 30 05:07:10.437840 (XEN) 1: [0.0] flags=0 cpu=0 credit=6784423 [w=256] load=778 (~0%) Jun 30 05:07:10.449746 (XEN) 2: [0.1] flags=0 cpu=1 credit=9718832 [w=256] load=205 (~0%) Jun 30 05:07:10.449782 (XEN) Runqueue 0: Jun 30 05:07:10.449805 (XEN) CPU[00] runq=0, sibling={0}, core={0-1} Jun 30 05:07:10.461713 (XEN) CPU[01] runq=0, sibling={1}, core={0-1} Jun 30 05:07:10.461774 (XEN) RUNQ: Jun 30 05:07:10.461815 (XEN) CPUs info: Jun 30 05:07:10.461854 (XEN) CPU[00] current=d[IDLE]v0, curr=d[IDLE]v0, prev=NULL Jun 30 05:07:10.473665 (XEN) CPU[01] current=d[IDLE]v1, curr=d[IDLE]v1, prev=NULL Jun 30 05:07:10.473726 Jun 30 05:07:12.348360 Jun 30 05:07:14.138192 Jun 30 05:07:14.356655 (XEN) Synced stime skew: max=83ns avg=83ns samples=1 current=83ns Jun 30 05:07:14.373774 (XEN) Synced cycles skew: max=2 avg=2 samples=1 current=2 Jun 30 05:07:14.373836 Jun 30 05:07:14.375948 Jun 30 05:07:16.368525 Jun 30 05:07:18.148500 Jun 30 05:07:18.382502 Jun 30 05:07:20.154879 Jun 30 05:07:20.400993 Jun 30 05:07:22.161366 Jun 30 05:07:32.413766 (XEN) 'q' pressed -> dumping domain info (now = 451870244333) Jun 30 05:07:32.432796 (XEN) General information for domain 0: Jun 30 05:07:32.432796 (XEN) refcnt=3 dying=0 pause Jun 30 05:07:32.435156 _count=0 Jun 30 05:07:32.444564 (XEN) nr_pages=131072 xenheap_pages=2 dirty_cpus={} max_pages=131072 Jun 30 05:07:32.444564 (XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=00000020 Jun 30 05:07:32.456823 (XEN) p2m mappings for domain 0 (vmid 1): Jun 30 05:07:32.456823 (XEN) 1G mappings: 0 (shattered 0) Jun 30 05:07:32.456823 (XEN) 2M mappings: 255 (shattered 1) Jun 30 05:07:32.468619 (XEN) 4K mappings: 944 Jun 30 05:07:32.468619 (XEN) Rangesets belonging to domain 0: Jun 30 05:07:32.468619 (XEN) Interrupts { 32-72, 74, 77-79, 82-84, 86, 88-100, 103-104, 107-110, 114, 116-120, 123, 126-128, 138, 144, 146-147, 149-151, 156 } Jun 30 05:07:32.484677 (XEN) I/O Memory { 2020-2050, 3810-3811, 3830-3831, 3860-3861, 10000-10001, 10010-10045, 10050-10055, 10060-10061, 101b0-101b1, 101d0-101d1, 101e0-101e1, 10440-10441, 10800-10801, 10830-10831, 10850-10851, 10a60-10a61, 10d10-10d11, 11000-11010, 11200-11201, 11210-11211, 11400-11401, 11800-11805, 11c00-11c01, 11c10-11c11, 11d40-11d41, 11f20-11f21, 12000-12010, 12100-12101, 12110-12111, 12120-12121, 12130-12131, 12170-12171, 121a0-121a1, 121b0-121b1, 121d0-121d1, 12200-12201, 12210-12211, 12220-12221, 12230-12231, 12250-12251, 122f0-122f1, 12c00-12c01, 12c10-12c11, 12c30-12c31, 12c60-12c61, 12c70-12c71, 12c80-12c81, 12c90-12c91, 12ca0-12ca1, 12cb0-12cb1, 12cc0-12cc1, 12cd0-12cd1, 12ce0-12ce1, 12d10-12d11, 12d20-12d21, 12d30-12d31, 12d40-12d41, 12d60-12d61, 12d70-12d71, 12dd0-12dd1, 13260-13261, 13270-13271, 13280-13281, 13290-13291, 132a0-132a1, 132b0-132b1, 132c0-132c1, 132d0-132d1, 132e0-132e1, 132f0-132f1, 13400-13401, 13c40-13c41, 13c50-13c51, 13e00-13e01, 13e10-13e11, 13e20-13e21, 13e30-13e31, 13e80-13e81, 13e90-13e91, 13ea0-13ea1, 13eb0-13eb1, 14400-14440, 14450-14460, 14500-14510, 14530-145a0, 145b0-145b1, 14640-14641, 14650-14651 } Jun 30 05:07:32.580627 (XEN) NODE affinity for domain 0: [0] Jun 30 05:07:32.580627 (XEN) VCPU information and callbacks for domain 0: Jun 30 05:07:32.592775 (XEN) UNIT0 affinities: hard={0-1} soft={0-1} Jun 30 05:07:32.592841 (XEN) VCPU0: CPU0 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Jun 30 05:07:32.604627 (XEN) pause_count=0 pause_flags=1 Jun 30 05:07:32.604627 (XEN) GICH_LRs (vcpu 0) mask=0 Jun 30 05:07:32.604627 (XEN) VCPU_LR[0]=0 Jun 30 05:07:32.604627 (XEN) VCPU_LR[1]=0 Jun 30 05:07:32.604627 (XEN) VCPU_LR[2]=0 Jun 30 05:07:32.616623 (XEN) VCPU_LR[3]=0 Jun 30 05:07:32.616623 (XEN) No periodic timer Jun 30 05:07:32.616623 (XEN) UNIT1 affinities: hard={0-1} soft={0-1} Jun 30 05:07:32.616623 (XEN) VCPU1: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Jun 30 05:07:32.628622 (XEN) pause_count=0 pause_flags=1 Jun 30 05:07:32.628622 (XEN) GICH_LRs (vcpu 1) mask=0 Jun 30 05:07:32.628622 (XEN) VCPU_LR[0]=0 Jun 30 05:07:32.628622 (XEN) VCPU_LR[1]=0 Jun 30 05:07:32.640630 (XEN) VCPU_LR[2]=0 Jun 30 05:07:32.640630 (XEN) VCPU_LR[3]=0 Jun 30 05:07:32.640630 (XEN) No periodic timer Jun 30 05:07:32.640630 (XEN) Notifying guest 0:0 (virq 1, port 0) Jun 30 05:07:32.640630 (XEN) Notifying guest 0:1 (virq 1, port 0) Jun 30 05:07:32.652570 Jun 30 05:07:44.394539 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 30 05:07:44.417693 Jun 30 05:07:44.417725 arndale-metrocentre login: Jun 30 05:07:44.419568 Jun 30 05:09:34.257732 Jun 30 05:09:34.257851 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 05:09:34.257921 Jun 30 05:09:34.257962 CPU: Exynos5250@1000MHz Jun 30 05:09:34.258006 Jun 30 05:09:34.258044 Board: Arndale Jun 30 05:09:34.258085 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 05:09:34.269715 ready Jun 30 05:09:34.269744 DRAM: 2 GiB Jun 30 05:09:34.269767 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 05:09:34.281734 trace: enabled Jun 30 05:09:34.329691 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 05:09:34.689685 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 05:09:34.737736 In: serial Jun 30 05:09:34.737790 Out: serial Jun 30 05:09:34.749737 Err: serial Jun 30 05:09:34.749791 SCSI: ARNDALE SCSI INIT Jun 30 05:09:34.749835 Target spinup took 0 ms. Jun 30 05:09:34.749877 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 05:09:34.761790 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 05:09:34.761852 Net: Net Initialization Skipped Jun 30 05:09:34.761896 No ethernet found. Jun 30 05:09:34.773719 Hostname: arndale-metrocentre Jun 30 05:09:34.773775 Hit any key to stop autoboot: 2  1  0 Jun 30 05:09:36.693706 (Re)start USB... Jun 30 05:09:36.693765 USB0: USB EHCI 1.00 Jun 30 05:09:36.705699 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 05:09:42.301775 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 05:09:42.301873 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 05:09:42.745724 Waiting for Ethernet connection... done. Jun 30 05:09:44.401711 BOOTP broadcast 1 Jun 30 05:09:44.401769 BOOTP broadcast 2 Jun 30 05:09:45.913776 DHCP client bound to address 10.149.64.44 (1579 ms) Jun 30 05:09:45.914467 Using asx0 device Jun 30 05:09:45.914538 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 05:09:45.925736 Filename 'pxelinux.0'. Jun 30 05:09:45.925792 Load address: 0x43e00000 Jun 30 05:09:45.925834 Loading: *### Jun 30 05:09:45.937682 2.2 MiB/s Jun 30 05:09:45.949761 done Jun 30 05:09:45.949812 Bytes transferred = 42430 (a5be hex) Jun 30 05:09:45.949858 missing environment variable: pxeuuid Jun 30 05:09:45.949901 Retrieving file: pxelinux.cfg/0A95402C Jun 30 05:09:45.949945 Using asx0 device Jun 30 05:09:45.961766 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 05:09:45.961828 Filename 'pxelinux.cfg/0A95402C'. Jun 30 05:09:45.961873 Load address: 0x51000000 Jun 30 05:09:45.973761 Loading: *# Jun 30 05:09:45.973815 31.3 KiB/s Jun 30 05:09:45.973857 done Jun 30 05:09:45.973894 Bytes transferred = 65 (41 hex) Jun 30 05:09:45.973937 Config file found Jun 30 05:09:45.973976 Ignoring unknown command: serial Jun 30 05:09:45.974018 1: local Jun 30 05:09:45.974056 scanning bus for devices... Jun 30 05:09:45.985694 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 05:09:45.997761 Type: Hard Disk Jun 30 05:09:45.997824 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 05:09:46.009758 Found 1 device(s). Jun 30 05:09:46.009814 Jun 30 05:09:46.009853 SCSI device 0: Jun 30 05:09:46.009893 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 05:09:46.009941 Type: Hard Disk Jun 30 05:09:46.021697 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 05:09:46.021731 ... is now current device Jun 30 05:09:46.021755 Scanning scsi 0... Jun 30 05:09:46.021777 Found U-Boot script /boot.scr Jun 30 05:09:46.201718 1768 bytes read in 38 ms (44.9 KiB/s) Jun 30 05:09:46.249744 ## Executing script at 50000000 Jun 30 05:09:46.249800 Loading dtbs/6.10.0-rc5+/exynos5250-arndale.dtb Jun 30 05:09:46.249847 46641 bytes read in 1246 ms (36.1 KiB/s) Jun 30 05:09:47.461734 983052 bytes read in 102 ms (9.2 MiB/s) Jun 30 05:09:47.593722 Loaded xen-4.19-unstable to 0x41000000 (f000c) Jun 30 05:09:47.593778 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan Jun 30 05:09:47.605705 10785280 bytes read in 504 ms (20.4 MiB/s) Jun 30 05:09:48.109713 Loaded vmlinuz-6.10.0-rc5+ to 0x42000000 (a49200) Jun 30 05:09:48.121761 command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 05:09:48.133750 12142292 bytes read in 521 ms (22.2 MiB/s) Jun 30 05:09:48.661754 Loaded initrd.img-6.10.0-rc5+ to 0x43300000 (b946d4) Jun 30 05:09:48.661816 chosen { Jun 30 05:09:48.673757 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan"; Jun 30 05:09:48.673833 #size-cells = <0x00000001>; Jun 30 05:09:48.685758 #address-cells = <0x00000001>; Jun 30 05:09:48.685815 stdout-path = "serial2:115200n8"; Jun 30 05:09:48.685860 module@1 { Jun 30 05:09:48.685935 reg = <0x43300000 0x00b946d4>; Jun 30 05:09:48.685981 compatible = "xen,linux-initrd", "xen,multiboot-module"; Jun 30 05:09:48.697768 }; Jun 30 05:09:48.697821 module@0 { Jun 30 05:09:48.697861 bootargs = "ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Jun 30 05:09:48.709778 reg = <0x42000000 0x00a49200>; Jun 30 05:09:48.721764 compatible = "xen,linux-zimage", "xen,multiboot-module"; Jun 30 05:09:48.721826 }; Jun 30 05:09:48.721865 }; Jun 30 05:09:48.721902 Booting 0x41000000 - 0x43000000 Jun 30 05:09:48.721943 Kernel image @ 0x41000000 [ 0x000000 - 0x12f000 ] Jun 30 05:09:48.733763 ## Flattened Device Tree blob at 43000000 Jun 30 05:09:48.733822 Booting using the fdt blob at 0x43000000 Jun 30 05:09:48.733867 reserving fdt memory region: addr=43000000 size=c000 Jun 30 05:09:48.745737 Loading Device Tree to 4fff1000, end 4fffffff ... OK Jun 30 05:09:48.745797 Jun 30 05:09:48.757726 Starting kernel ...(fake run for tracing) Jun 30 05:09:48.757786 Jun 30 05:09:48.757824 Jun 30 05:09:48.757861 Starting kernel ... Jun 30 05:09:48.757901 Jun 30 05:09:48.757937 __ __ _ _ _ ___ _ _ _ Jun 30 05:09:48.805737 \ \/ /___ _ __ | || | / |/ _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Jun 30 05:09:48.817774 \ // _ \ '_ \ | || |_ | | (_) |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Jun 30 05:09:48.829749 / \ __/ | | | |__ _|| |\__, |__| |_| | | | \__ \ || (_| | |_) | | __/ Jun 30 05:09:48.829811 /_/\_\___|_| |_| |_|(_)_| /_/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Jun 30 05:09:48.841754 Jun 30 05:09:48.841805 (XEN) Xen version 4.19-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Sun Jun 30 01:52:15 UTC 2024 Jun 30 05:09:48.853755 (XEN) Latest ChangeSet: Wed Jun 26 16:07:30 2024 +0100 git:08f9b1dd9c Jun 30 05:09:48.853818 (XEN) build-id: a1f1bc3a5986d3ec30239a56d95725b8f32801f2 Jun 30 05:09:48.865764 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Jun 30 05:09:48.865828 (XEN) 32-bit Execution: Jun 30 05:09:48.865871 (XEN) Processor Features: 00001031:00011011 Jun 30 05:09:48.877767 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Jun 30 05:09:48.877828 (XEN) Extensions: GenericTimer Security Jun 30 05:09:48.877874 (XEN) Debug Features: 02010555 Jun 30 05:09:48.889767 (XEN) Auxiliary Features: 00000000 Jun 30 05:09:48.889825 (XEN) Memory Model Features: 10201105 20000000 Jun 30 05:09:48.889871 (XEN) 01240000 02102211 Jun 30 05:09:48.901754 (XEN) ISA Features: 02101110 13112111 21232041 Jun 30 05:09:48.901814 (XEN) 11112131 10011142 00000000 Jun 30 05:09:48.901859 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Jun 30 05:09:48.913763 (XEN) Set SYSRAM to 0000000041000074 (00200074) Jun 30 05:09:48.928542 (XEN) SMP: Allowing 2 CPUs Jun 30 05:09:48.928612 (XEN) enabled workaround for: ARM erratum 766422 Jun 30 05:09:48.928627 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Jun 30 05:09:48.940438 (XEN) GICv2 initialization: Jun 30 05:09:48.940438 (XEN) gic_dist_addr=0000000010481000 Jun 30 05:09:48.940438 (XEN) gic_cpu_addr=0000000010482000 Jun 30 05:09:48.952443 (XEN) gic_hyp_addr=0000000010484000 Jun 30 05:09:48.952443 (XEN) gic_vcpu_addr=0000000010486000 Jun 30 05:09:48.952443 (XEN) gic_maintenance_irq=25 Jun 30 05:09:48.964385 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Jun 30 05:09:48.964385 (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2) Jun 30 05:09:48.964385 (XEN) Initializing Credit2 scheduler Jun 30 05:09:48.976459 (XEN) load_precision_shift: 18 Jun 30 05:09:48.976459 (XEN) load_window_shift: 30 Jun 30 05:09:48.976459 (XEN) underload_balance_tolerance: 0 Jun 30 05:09:48.976459 (XEN) overload_balance_tolerance: -3 Jun 30 05:09:48.988459 (XEN) runqueues arrangement: socket Jun 30 05:09:48.988459 (XEN) cap enforcement granularity: 10ms Jun 30 05:09:48.988459 (XEN) load tracking window length 1073741824 ns Jun 30 05:09:49.000464 (XEN) Allocated console ring of 16 KiB. Jun 30 05:09:49.000464 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Jun 30 05:09:49.000464 (XEN) CPU0: Guest atomics will try 2 times before pausing the domain Jun 30 05:09:49.012457 (XEN) Bringing up CPU1 Jun 30 05:09:49.012457 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Jun 30 05:09:49.024453 (XEN) Brought up 2 CPUs Jun 30 05:09:49.024453 (XEN) CPU 1 booted. Jun 30 05:09:49.024453 (XEN) I/O virtualisation disabled Jun 30 05:09:49.024453 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Jun 30 05:09:49.036458 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Jun 30 05:09:49.036458 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Jun 30 05:09:49.036458 (XEN) Initializing Credit2 scheduler Jun 30 05:09:49.048454 (XEN) load_precision_shift: 18 Jun 30 05:09:49.048454 (XEN) load_window_shift: 30 Jun 30 05:09:49.048454 (XEN) underload_balance_tolerance: 0 Jun 30 05:09:49.048454 (XEN) overload_balance_tolerance: -3 Jun 30 05:09:49.060462 (XEN) runqueues arrangement: socket Jun 30 05:09:49.060462 (XEN) cap enforcement granularity: 10ms Jun 30 05:09:49.060462 (XEN) load tracking window length 1073741824 ns Jun 30 05:09:49.072458 (XEN) Adding cpu 0 to runqueue 0 Jun 30 05:09:49.072458 (XEN) First cpu on runqueue, activating Jun 30 05:09:49.072458 (XEN) Adding cpu 1 to runqueue 0 Jun 30 05:09:49.072458 (XEN) alternatives: Patching with alt table 002c2f84 -> 002c305c Jun 30 05:09:49.084469 (XEN) CPU0 will execute ICIALLU on guest exit Jun 30 05:09:49.084469 (XEN) CPU1 will execute ICIALLU on guest exit Jun 30 05:09:49.096455 (XEN) *** LOADING DOMAIN 0 *** Jun 30 05:09:49.096455 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Jun 30 05:09:49.096455 (XEN) Loading ramdisk from boot module @ 0000000043300000 Jun 30 05:09:49.108428 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Jun 30 05:09:49.108428 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Jun 30 05:09:49.684452 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Jun 30 05:09:49.684452 (XEN) Allocating PPI 16 for event channel interrupt Jun 30 05:09:49.720550 (XEN) d0: extended regions not supported for 32-bit guests Jun 30 05:09:49.720602 (XEN) Loading zImage from 0000000042000000 to 0000000067400000-0000000067e49200 Jun 30 05:09:49.732390 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d946d4 Jun 30 05:09:49.828386 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b499 Jun 30 05:09:49.928456 (XEN) Initial low memory virq threshold set at 0x4000 pages. Jun 30 05:09:49.928456 (XEN) Scrubbing Free RAM in background Jun 30 05:09:49.940557 (XEN) Std. Loglevel: All Jun 30 05:09:49.940570 (XEN) Guest Loglevel: All Jun 30 05:09:49.940570 (XEN) *************************************************** Jun 30 05:09:49.940570 (XEN) WARNING: SILO mode is not enabled. Jun 30 05:09:49.952458 (XEN) It has implications on the security of the system, Jun 30 05:09:49.952458 (XEN) unless the communications have been forbidden between Jun 30 05:09:49.952458 (XEN) untrusted domains. Jun 30 05:09:49.964441 (XEN) *************************************************** Jun 30 05:09:49.964441 (XEN) 3... 2... 1... Jun 30 05:09:52.964418 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 30 05:09:52.976416 (XEN) Freed 352kB init memory. Jun 30 05:09:52.976416 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 05:09:54.104402 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Jun 30 05:09:54.128589 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Jun 30 05:09:54.128617 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Jun 30 05:09:54.140651 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Jun 30 05:09:54.140729 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 05:09:54.152386 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 05:09:54.188434 [ 0.000000] Linux version 6.10.0-rc5+ (osstest@himrod0) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Sun Jun 30 01:19:39 UTC 2024 Jun 30 05:09:54.200359 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 30 05:09:54.212460 [ 0.000000] CPU: div instructions available: patching division code Jun 30 05:09:54.224459 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 05:09:54.224459 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 05:09:54.236456 [ 0.000000] Memory policy: Data cache writealloc Jun 30 05:09:54.236456 [ 0.000000] Xen 4.19 support found Jun 30 05:09:54.248457 [ 0.000000] efi: UEFI not found. Jun 30 05:09:54.248457 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 on node -1 Jun 30 05:09:54.248457 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 05:09:54.260474 [ 0.000000] Zone ranges: Jun 30 05:09:54.260474 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Jun 30 05:09:54.260474 [ 0.000000] Normal empty Jun 30 05:09:54.272479 [ 0.000000] HighMem empty Jun 30 05:09:54.272479 [ 0.000000] Movable zone start for each node Jun 30 05:09:54.272479 [ 0.000000] Early memory node ranges Jun 30 05:09:54.272479 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Jun 30 05:09:54.284475 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Jun 30 05:09:54.296477 [ 0.000000] psci: probing for conduit method from DT. Jun 30 05:09:54.296477 [ 0.000000] psci: PSCIv1.1 detected in firmware. Jun 30 05:09:54.296477 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Jun 30 05:09:54.306473 [ 0.000000] psci: Trusted OS migration not required Jun 30 05:09:54.306487 [ 0.000000] psci: SMC Calling Convention v1.2 Jun 30 05:09:54.320461 [ 0.000000] percpu: Embedded 18 pages/cpu s41428 r8192 d24108 u73728 Jun 30 05:09:54.320461 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 05:09:54.344458 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 05:09:54.344458 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Jun 30 05:09:54.356469 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 131072 Jun 30 05:09:54.368453 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Jun 30 05:09:54.368453 [ 0.000000] Memory: 414600K/524288K available (15360K kernel code, 2268K rwdata, 6084K rodata, 2048K init, 439K bss, 44152K reserved, 65536K cma-reserved, 0K highmem) Jun 30 05:09:54.380465 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 05:09:54.392458 [ 0.000000] trace event string verifier disabled Jun 30 05:09:54.392458 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 05:09:54.404470 [ 0.000000] rcu: RCU event tracing is enabled. Jun 30 05:09:54.404470 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Jun 30 05:09:54.416477 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Jun 30 05:09:54.416477 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 05:09:54.428451 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 05:09:54.428451 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 05:09:54.440460 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 05:09:54.440460 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Jun 30 05:09:54.452456 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 05:09:54.464478 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 05:09:54.464478 [ 0.000013] Switching to timer-based delay loop, resolution 41ns Jun 30 05:09:54.476463 [ 0.000548] Console: colour dummy device 80x30 Jun 30 05:09:54.476463 [ 0.000566] printk: legacy console [hvc0] enabled Jun 30 05:09:54.488452 [ 0.299560] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Jun 30 05:09:54.500476 [ 0.309958] CPU: Testing write buffer coherency: ok Jun 30 05:09:54.500476 [ 0.314900] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 05:09:54.512477 [ 0.324454] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 05:09:54.512477 [ 0.330885] pid_max: default: 32768 minimum: 301 Jun 30 05:09:54.524389 [ 0.335652] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 05:09:54.524389 [ 0.342934] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 05:09:54.536474 [ 0.351349] /cpus/cpu@0 missing clock-frequency property Jun 30 05:09:54.536474 [ 0.356137] /cpus/cpu@1 missing clock-frequency property Jun 30 05:09:54.548449 [ 0.361554] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 05:09:54.548449 [ 0.368252] xen:grant_table: Grant tables using version 1 layout Jun 30 05:09:54.560452 [ 0.373386] Grant table initialized Jun 30 05:09:54.560452 [ 0.376936] xen:events: Using FIFO-based ABI Jun 30 05:09:54.572453 [ 0.381240] Xen: initializing cpu0 Jun 30 05:09:54.572453 [ 0.384765] Setting up static identity map for 0x60300000 - 0x603000ac Jun 30 05:09:54.572453 [ 0.392553] rcu: Hierarchical SRCU implementation. Jun 30 05:09:54.584440 [ 0.396158] rcu: Max phase no-delay instances is 1000. Jun 30 05:09:54.584440 [ 0.404393] EFI services will not be available. Jun 30 05:09:54.596436 [ 0.407715] smp: Bringing up secondary CPUs ... Jun 30 05:09:54.596436 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 05:09:54.668451 [ 0.481975] Xen: initializing cpu1 Jun 30 05:09:54.668451 [ 0.482135] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 05:09:54.680485 [ 0.482159] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 05:09:54.692469 [ 0.501136] smp: Brought up 1 node, 2 CPUs Jun 30 05:09:54.692469 [ 0.504789] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 05:09:54.692469 [ 0.511075] CPU: All CPU(s) started in SVC mode. Jun 30 05:09:54.702104 [ 0.516976] devtmpfs: initialized Jun 30 05:09:54.702104 [ 0.529359] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 05:09:54.716437 [ 0.535909] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Jun 30 05:09:54.728461 [ 0.545581] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 05:09:54.740454 [ 0.553503] pinctrl core: initialized pinctrl subsystem Jun 30 05:09:54.740454 [ 0.560094] DMI not present or invalid. Jun 30 05:09:54.752548 [ 0.563602] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 05:09:54.752607 [ 0.570219] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 05:09:54.764438 [ 0.579544] thermal_sys: Registered thermal governor 'step_wise' Jun 30 05:09:54.776409 [ 0.579701] software IO TLB: area num 2. Jun 30 05:09:54.776409 [ 0.588379] software IO TLB: only able to allocate 8 MB Jun 30 05:09:54.776409 [ 0.595447] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Jun 30 05:09:54.788399 [ 0.600648] No ATAGs? Jun 30 05:09:54.788399 [ 0.602955] hw-breakpoint: Failed to enable monitor mode on CPU 0. Jun 30 05:09:54.800364 [ 0.611657] Serial: AMBA PL011 UART driver Jun 30 05:09:54.800364 [ 0.658278] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 65 Jun 30 05:09:54.848379 [ 0.686744] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 30 05:09:54.876400 [ 0.710049] xen:balloon: Initialising balloon driver Jun 30 05:09:54.900391 [ 0.716467] iommu: Default domain type: Translated Jun 30 05:09:54.900391 [ 0.719897] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 05:09:54.912405 [ 0.728617] SCSI subsystem initialized Jun 30 05:09:54.912405 [ 0.731362] usbcore: registered new interface driver usbfs Jun 30 05:09:54.924439 [ 0.736590] usbcore: registered new interface driver hub Jun 30 05:09:54.924439 [ 0.741953] usbcore: registered new device driver usb Jun 30 05:09:54.936532 [ 0.748620] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 05:09:54.936532 [ 0.752215] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 05:09:54.948393 [ 0.758468] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 05:09:54.948393 [ 0.763537] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 05:09:54.960437 [ 0.768462] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 05:09:54.960437 [ 0.774499] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 05:09:54.960437 [ 0.780288] pps_core: LinuxPPS API ver. 1 registered Jun 30 05:09:54.972432 [ 0.784674] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 05:09:54.984391 [ 0.793898] PTP clock support registered Jun 30 05:09:54.984391 [ 0.798115] EDAC MC: Ver: 3.0.0 Jun 30 05:09:54.984391 [ 0.801461] scmi_core: SCMI protocol bus registered Jun 30 05:09:54.996419 [ 0.808047] vgaarb: loaded Jun 30 05:09:54.996419 [ 0.811984] clocksource: Switched to clocksource arch_sys_counter Jun 30 05:09:55.008395 [ 0.826044] NET: Registered PF_INET protocol family Jun 30 05:09:55.020406 [ 0.829687] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Jun 30 05:09:55.020406 [ 0.837616] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 05:09:55.032411 [ 0.845282] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 05:09:55.044442 [ 0.853088] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Jun 30 05:09:55.044442 [ 0.860912] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Jun 30 05:09:55.056427 [ 0.868211] TCP: Hash tables configured (established 4096 bind 4096) Jun 30 05:09:55.056427 [ 0.874570] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 05:09:55.068638 [ 0.881125] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 05:09:55.068641 [ 0.888257] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 05:09:55.080443 [ 0.894353] RPC: Registered named UNIX socket transport module. Jun 30 05:09:55.080443 [ 0.899878] RPC: Registered udp transport module. Jun 30 05:09:55.092453 [ 0.904646] RPC: Registered tcp transport module. Jun 30 05:09:55.092453 [ 0.909406] RPC: Registered tcp-with-tls transport module. Jun 30 05:09:55.104462 [ 0.914975] RPC: Registered tcp NFSv4.1 backchannel transport module. Jun 30 05:09:55.104462 [ 0.921478] PCI: CLS 0 bytes, default 64 Jun 30 05:09:55.116437 [ 0.926893] Initialise system trusted keyrings Jun 30 05:09:55.116437 [ 0.930238] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Jun 30 05:09:55.128446 [ 0.936746] squashfs: version 4.0 (2009/01/31) Phillip Lougher Jun 30 05:09:55.128446 [ 0.942647] Trying to unpack rootfs image as initramfs... Jun 30 05:09:55.128446 [ 0.973659] NFS: Registering the id_resolver key type Jun 30 05:09:55.164454 [ 0.977371] Key type id_resolver registered Jun 30 05:09:55.164454 [ 0.981600] Key type id_legacy registered Jun 30 05:09:55.176537 [ 0.985724] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Jun 30 05:09:55.176616 [ 0.992478] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Jun 30 05:09:55.188405 [ 1.013502] Key type asymmetric registered Jun 30 05:09:55.200381 [ 1.016234] Asymmetric key parser 'x509' registered Jun 30 05:09:55.212459 [ 1.021234] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) Jun 30 05:09:55.212459 [ 1.028658] io scheduler mq-deadline registered Jun 30 05:09:55.224439 [ 1.033272] io scheduler kyber registered Jun 30 05:09:55.224439 [ 1.037345] io scheduler bfq registered Jun 30 05:09:55.224439 [ 1.198436] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 05:09:55.392470 [ 1.204692] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 05:09:55.404401 [ 1.238523] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 05:09:55.428444 [ 1.244789] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 05:09:55.440402 [ 1.283977] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 05:09:55.480424 [ 1.290189] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 05:09:55.480424 [ 1.338280] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 05:09:55.528433 [ 1.344555] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 05:09:55.540389 [ 1.357221] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 05:09:55.552380 [ 1.427230] xen:xen_evtchn: Event-channel device installed Jun 30 05:09:55.612462 [ 1.454869] Freeing initrd memory: 11860K Jun 30 05:09:55.648441 [ 1.508922] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 05:09:55.696359 [ 1.519874] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 05:09:55.708420 [ 1.528449] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 05:09:55.720436 [ 1.536961] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 05:09:55.732426 [ 1.545970] SuperH (H)SCI(F) driver initialized Jun 30 05:09:55.732426 [ 1.550291] STMicroelectronics ASC driver initialized Jun 30 05:09:55.744438 [ 1.555192] STM32 USART driver initialized Jun 30 05:09:55.744438 [ 1.560604] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 05:09:55.756383 [ 1.569461] random: crng init done Jun 30 05:09:55.756383 [ 1.580891] brd: module loaded Jun 30 05:09:55.768357 [ 1.586836] loop: module loaded Jun 30 05:09:55.780317 [ 1.607740] Invalid max_queues (4), will use default max: 2. Jun 30 05:09:55.792396 [ 1.626311] tun: Universal TUN/TAP device driver, 1.6 Jun 30 05:09:55.816455 [ 1.630188] CAN device driver interface Jun 30 05:09:55.816455 [ 1.635323] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Jun 30 05:09:55.828442 [ 1.646483] xen_netfront: Initialising Xen virtual ethernet driver Jun 30 05:09:55.840542 [ 1.651339] pegasus: Pegasus/Pegasus II USB Ethernet driver Jun 30 05:09:55.840542 [ 1.656967] usbcore: registered new interface driver pegasus Jun 30 05:09:55.852457 [ 1.662697] usbcore: registered new interface driver asix Jun 30 05:09:55.852457 [ 1.668151] usbcore: registered new interface driver ax88179_178a Jun 30 05:09:55.864617 [ 1.674327] usbcore: registered new interface driver cdc_ether Jun 30 05:09:55.864693 [ 1.680216] usbcore: registered new interface driver smsc75xx Jun 30 05:09:55.876475 [ 1.686039] usbcore: registered new interface driver smsc95xx Jun 30 05:09:55.876475 [ 1.691847] usbcore: registered new interface driver net1080 Jun 30 05:09:55.888476 [ 1.697590] usbcore: registered new interface driver cdc_subset Jun 30 05:09:55.888476 [ 1.703575] usbcore: registered new interface driver zaurus Jun 30 05:09:55.900435 [ 1.709214] usbcore: registered new interface driver cdc_ncm Jun 30 05:09:55.900435 [ 1.718569] usbcore: registered new interface driver usb-storage Jun 30 05:09:55.912444 [ 1.729033] i2c_dev: i2c /dev entries driver Jun 30 05:09:55.912444 [ 1.747413] device-mapper: uevent: version 1.0.3 Jun 30 05:09:55.936445 [ 1.750827] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev Jun 30 05:09:55.948472 [ 1.760465] cpu cpu0: OPP table can't be empty Jun 30 05:09:55.948472 [ 1.765178] failed to register cpuidle driver Jun 30 05:09:55.960461 [ 1.768538] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Jun 30 05:09:55.960461 [ 1.776900] sdhci: Secure Digital Host Controller Interface driver Jun 30 05:09:55.972443 [ 1.781914] sdhci: Copyright(c) Pierre Ossman Jun 30 05:09:55.972443 [ 1.790107] sdhci-pltfm: SDHCI platform and OF driver helper Jun 30 05:09:55.984450 [ 1.797882] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 05:09:55.984450 [ 1.803344] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Jun 30 05:09:55.996460 [ 1.809987] usbcore: registered new interface driver usbhid Jun 30 05:09:55.996460 [ 1.814690] usbhid: USB HID core driver Jun 30 05:09:56.008432 [ 1.825603] NET: Registered PF_INET6 protocol family Jun 30 05:09:56.020454 [ 1.830122] Segment Routing with IPv6 Jun 30 05:09:56.020454 [ 1.832999] In-situ OAM (IOAM) with IPv6 Jun 30 05:09:56.020454 [ 1.836975] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Jun 30 05:09:56.032451 [ 1.843413] NET: Registered PF_PACKET protocol family Jun 30 05:09:56.032451 [ 1.848037] can: controller area network core Jun 30 05:09:56.044475 [ 1.852522] NET: Registered PF_CAN protocol family Jun 30 05:09:56.044475 [ 1.857316] can: raw protocol Jun 30 05:09:56.044475 [ 1.860357] can: broadcast manager protocol Jun 30 05:09:56.056457 [ 1.864650] can: netlink gateway - max_hops=1 Jun 30 05:09:56.056457 [ 1.869341] Key type dns_resolver registered Jun 30 05:09:56.056457 [ 1.874066] ThumbEE CPU extension supported. Jun 30 05:09:56.068453 [ 1.877720] Registering SWP/SWPB emulation handler Jun 30 05:09:56.068453 [ 1.892186] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level Jun 30 05:09:56.080459 [ 1.899054] Loading compiled-in X.509 certificates Jun 30 05:09:56.092405 [ 1.941932] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 05:09:56.128443 [ 1.945621] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 05:09:56.140460 [ 1.952511] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 05:09:56.152437 [ 1.960381] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 05:09:56.152437 [ 2.009292] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 05:09:56.200429 [ 2.018194] s5m-rtc s5m-rtc: setting system clock to 2000-01-02T00:00:23 UTC (946771223) Jun 30 05:09:56.212445 [ 2.029168] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 05:09:56.224458 [ 2.033889] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 05:09:56.224458 [ 2.038149] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 05:09:56.224458 [ 2.044936] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 05:09:56.236460 [ 2.050853] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 05:09:56.236460 [ 2.056974] clk: Not disabling unused clocks Jun 30 05:09:56.248461 [ 2.060529] PM: genpd: Disabling unused power domains Jun 30 05:09:56.248461 [ 2.069182] Freeing unused kernel image (initmem) memory: 2048K Jun 30 05:09:56.260459 [ 2.075508] Run /init as init process Jun 30 05:09:56.260459 Loading, please wait... Jun 30 05:09:56.284400 Starting systemd-udevd version 252.26-1~deb12u2 Jun 30 05:09:56.356414 [ 3.323521] i2c-gpio i2c-10: using lines 552 (SDA) and 553 (SCL) Jun 30 05:09:57.517720 [ 3.456875] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 05:09:57.649761 [ 3.463974] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 05:09:57.661656 [ 3.558855] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 05:09:57.757732 [ 3.570267] phy phy-12130000.phy.9: phy_power_on was called before phy_init Jun 30 05:09:57.757768 [ 3.575949] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 05:09:57.769729 [ 3.581449] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Jun 30 05:09:57.769798 [ 3.606997] Synopsys Designware Multimedia Card Interface Driver Jun 30 05:09:57.793753 [ 3.617897] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 30 05:09:57.805729 [ 3.618623] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 30 05:09:57.817756 [ 3.631031] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 30 05:09:57.829715 [ 3.633915] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 30 05:09:57.829750 [ 3.638535] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 30 05:09:57.841714 [ 3.677116] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 30 05:09:57.865784 [ 3.684149] ahci-dwc 122f0000.sata: AHCI vers 0001.0300, 32 command slots, 6 Gbps, platform mode Jun 30 05:09:57.877765 [ 3.692039] ahci-dwc 122f0000.sata: 1/1 ports implemented (port mask 0x1) Jun 30 05:09:57.889778 [ 3.698888] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 30 05:09:57.889850 [ 3.710081] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 05:09:57.901714 [ 3.723008] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 30 05:09:57.913688 [ 3.728100] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 30 05:09:57.925751 [ 3.733653] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo Jun 30 05:09:57.925825 [ 3.742312] VDD_ALIVE_1.0V: Bringing 1000000uV into 1100000-1100000uV Jun 30 05:09:57.937729 [ 3.743567] mmc_host mmc0: card is polling. Jun 30 05:09:57.937761 [ 3.754178] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 30 05:09:57.949726 [ 3.760610] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 30 05:09:57.949788 [ 3.769640] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 127,32 bit host data width,128 deep fifo Jun 30 05:09:57.961662 [ 3.789058] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 Jun 30 05:09:57.985632 [ 3.811451] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 05:09:58.009734 [ 3.823386] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 05:09:58.021675 [ 3.845666] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 05:09:58.033756 [ 3.872179] scsi host0: ahci-dwc Jun 30 05:09:58.057652 [ 3.894090] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 128 lpm-pol 0 Jun 30 05:09:58.093673 [ 3.921979] hub 1-0:1.0: USB hub found Jun 30 05:09:58.105720 [ 3.924406] hub 1-0:1.0: 3 ports detected Jun 30 05:09:58.117665 [ 3.930828] phy phy-12130000.phy.9: phy_power_on was called before phy_init Jun 30 05:09:58.117665 [ 3.936483] exynos-ohci 12120000.usb: USB Host Controller Jun 30 05:09:58.129770 [ 3.941909] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Jun 30 05:09:58.141683 [ 3.991266] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 Jun 30 05:09:58.177742 [ 4.058456] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 05:09:58.249797 [ 4.068082] mmc1: new high speed SDHC card at address aaaa Jun 30 05:09:58.261700 [ 4.073807] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Jun 30 05:09:58.261700 [ 4.086829] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 30 05:09:58.285763 [ 4.095702] hub 2-0:1.0: USB hub found Jun 30 05:09:58.285826 [ 4.100011] hub 2-0:1.0: 3 ports detected Jun 30 05:09:58.285872 [ 4.103460] mmc0: new DDR MMC card at address 0001 Jun 30 05:09:58.297704 [ 4.119677] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Jun 30 05:09:58.309729 [ 4.125803] mmcblk0: p1 p2 p3 p4 Jun 30 05:09:58.309786 [ 4.131853] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Jun 30 05:09:58.321747 [ 4.132093] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Jun 30 05:09:58.321808 [ 4.141283] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Jun 30 05:09:58.333741 [ 4.146246] s3c-rtc 101e0000.rtc: registered as rtc1 Jun 30 05:09:58.333801 [ 4.160042] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Jun 30 05:09:58.345670 [ 4.402046] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 30 05:09:58.597760 [ 4.408351] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 30 05:09:58.597830 [ 4.413739] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 30 05:09:58.609706 [ 4.431369] ata1.00: configured for UDMA/133 Jun 30 05:09:58.621757 [ 4.435738] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 30 05:09:58.633744 [ 4.445275] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 30 05:09:58.633814 [ 4.451398] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 30 05:09:58.645762 [ 4.457481] sd 0:0:0:0: [sda] Write Protect is off Jun 30 05:09:58.645822 [ 4.461720] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 30 05:09:58.657766 [ 4.470881] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 30 05:09:58.657828 [ 4.494353] sda: sda1 sda2 < sda5 > Jun 30 05:09:58.681735 [ 4.497315] sd 0:0:0:0: [sda] Attached SCSI disk Jun 30 05:09:58.681794 [ 4.517915] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Jun 30 05:09:58.705727 [ 4.527689] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 05:09:58.717754 [ 4.531835] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 05:09:58.729711 [ 4.603043] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002000010 Jun 30 05:09:58.801762 [ 4.611892] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Jun 30 05:09:58.801825 [ 4.617380] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 05:09:58.813747 [ 4.622750] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 05:09:58.813816 [ 4.630441] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 05:09:58.825655 [ 4.651296] hub 3-0:1.0: USB hub found Jun 30 05:09:58.837726 [ 4.654009] hub 3-0:1.0: 1 port detected Jun 30 05:09:58.849630 [ 4.670345] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 05:09:58.861812 [ 4.678082] hub 4-0:1.0: USB hub found Jun 30 05:09:58.861870 [ 4.681205] hub 4-0:1.0: 1 port detected Jun 30 05:09:58.873706 [ 4.812052] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 05:09:59.005708 [ 5.000525] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 05:09:59.197668 [ 5.140802] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 05:09:59.329728 [ 5.261908] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 05:09:59.461674 [ 5.427424] I/O error, dev mmcblk1, sector 7743715 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 Jun 30 05:09:59.617796 [ 5.713578] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 05:09:59.905756 [ 5.881515] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 05:10:00.073666 [ 5.995948] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 05:10:00.193712 [ 6.103704] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 05:10:00.301706 [ 6.211419] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 05:10:00.409685 [ 6.319166] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 05:10:00.517724 [ 6.326787] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 05:10:00.517793 Begin: Loading essential drivers ... done. Jun 30 05:10:00.577701 Begin: Running /scripts/init-premount ... done. Jun 30 05:10:03.589826 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 30 05:10:03.601733 Begin: Running /scripts/local-premount ... done. Jun 30 05:10:03.613692 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 30 05:10:03.709666 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 30 05:10:03.817754 /dev/mapper/arndale--metrocentre--vg-root: recovering journal Jun 30 05:10:04.069725 /dev/mapper/arndale--metrocentre--vg-root: clean, 46076/1220608 files, 606056/4882432 blocks Jun 30 05:10:05.137737 done. Jun 30 05:10:05.149716 [ 10.967512] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 30 05:10:05.161676 [ 11.324607] EXT4-fs (dm-0): mounted filesystem 1d31c9f9-82ea-4299-9775-53c807dac037 ro with ordered data mode. Quota mode: disabled. Jun 30 05:10:05.521736 done. Jun 30 05:10:05.521789 Begin: Running /scripts/local-bottom ... done. Jun 30 05:10:05.557696 Begin: Running /scripts/init-bottom ... done. Jun 30 05:10:05.605687 INIT: version 3.06 booting Jun 30 05:10:06.133704 INIT: No inittab.d directory found Jun 30 05:10:06.217669 Using makefile-style concurrent boot in runlevel S. Jun 30 05:10:06.517645 Starting hotplug events dispatcher: systemd-udevd. Jun 30 05:10:08.261750 Synthesizing the initial hotplug events (subsystems)...done. Jun 30 05:10:08.693759 Synthesizing the initial hotplug events (devices)...[ 14.744443] wm8994 3-001a: Device is not a WM8994, ID is 0 Jun 30 05:10:08.929666 [ 14.756098] wm8994 3-001a: probe with driver wm8994 failed with error -22 Jun 30 05:10:08.941613 [ 15.421117] s5p-secss 10830000.sss: s5p-sss driver registered Jun 30 05:10:09.613577 [ 15.456799] s3c2410-wdt 101d0000.watchdog: wadone.tchdog inactive, Jun 30 05:10:09.649621 reset disabled, irq disabled Jun 30 05:10:09.649652 Waiting for /dev to be fully populated...[ 15.472178] mc: Linux media interface: v0.10 Jun 30 05:10:09.661612 [ 15.623864] videodev: Linux video capture interface: v2.00 Jun 30 05:10:09.805674 [ 15.721521] s5p-mfc 11000000.codec: Adding to iommu group 0 Jun 30 05:10:09.913620 [ 15.872407] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Jun 30 05:10:10.057815 [ 15.940949] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 05:10:10.129793 [ 15.949094] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 05:10:10.141794 [ 15.957790] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 05:10:10.153780 [ 15.972810] s5p-mfc 11000000.codec: decoder registered as /dev/video0 Jun 30 05:10:10.165767 [ 15.979673] s5p-mfc 11000000.codec: encoder registered as /dev/video1 Jun 30 05:10:10.165802 [ 16.030629] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 05:10:10.225774 [ 16.047410] exynos-gsc 13e00000.gsc: Adding to iommu group 1 Jun 30 05:10:10.237734 [ 16.066261] exynos-gsc 13e10000.gsc: Adding to iommu group 2 Jun 30 05:10:10.249768 [ 16.071425] exynos-gsc 13e20000.gsc: Adding to iommu group 3 Jun 30 05:10:10.261758 [ 16.083080] exynos-gsc 13e30000.gsc: Adding to iommu group 4 Jun 30 05:10:10.273705 [ 16.163678] usb3503 usb-hub: switched to HUB mode Jun 30 05:10:10.345753 [ 16.167301] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 05:10:10.357747 [ 16.204417] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 05:10:10.393775 [ 16.382387] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 05:10:10.573760 [ 16.490607] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 05:10:10.681759 [ 16.542064] usb 1-3: new high-speed USB device number 2 using exynos-ehci Jun 30 05:10:10.729759 [ 16.571391] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Jun 30 05:10:10.765718 [ 16.743133] hub 1-3:1.0: USB hub found Jun 30 05:10:10.933748 [ 16.749975] hub 1-3:1.0: 3 ports detected Jun 30 05:10:10.933780 [ 16.902025] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 05:10:11.089785 [ 17.037696] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 05:10:11.233664 [ 17.045442] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 05:10:11.233703 [ 17.054102] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 05:10:11.245723 [ 17.065785] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 05:10:11.257712 [ 17.073715] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 05:10:11.269712 [ 17.074083] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 05:10:11.269751 [ 17.082393] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 05:10:11.281716 [ 17.092223] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Jun 30 05:10:11.293665 [ 17.215701] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 05:10:11.401744 [ 17.274901] hub 1-3.2:1.0: USB hub found Jun 30 05:10:11.461687 [ 17.277837] hub 1-3.2:1.0: 4 ports detected Jun 30 05:10:11.461748 [ 17.323503] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 05:10:11.509708 [ 17.431272] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 05:10:11.617725 [ 17.460526] usbcore: registered new device driver onboard-usb-dev Jun 30 05:10:11.653637 [ 17.539043] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 05:10:11.725700 [ 17.546721] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 05:10:11.737648 [ 17.582935] hub 1-3.2:1.0: USB hub found Jun 30 05:10:11.773649 [ 17.585847] hub 1-3.2:1.0: 4 ports detected Jun 30 05:10:11.773678 [ 17.597882] hub 1-3.2:1.0: USB hub found Jun 30 05:10:11.785668 [ 17.601048] hub 1-3.2:1.0: 4 ports detected Jun 30 05:10:11.785696 done. Jun 30 05:10:11.965618 [ 17.823011] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 30 05:10:12.158952 [ 17.975871] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 30 05:10:12.169658 [ 18.183480] EXT4-fs (dm-0): re-mounted 1d31c9f9-82ea-4299-9775-53c807dac037 r/w. Quota mode: disabled. Jun 30 05:10:12.373687 Checking file systems...[ 18.754491] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 05:10:12.949757 [ 18.769358] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Jun 30 05:10:12.961721 [ 18.779219] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, f6:e5:c3:00:9d:3d Jun 30 05:10:12.973673 /dev/sda1: recovering journal Jun 30 05:10:14.257686 /dev/sda1: clean, 2179/61056 files, 44463/243968 blocks Jun 30 05:10:14.317718 done. Jun 30 05:10:14.353618 Cleaning up temporary files... /tmp. Jun 30 05:10:14.497650 [ 20.517946] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 30 05:10:14.701693 [ 20.569873] EXT4-fs (sda1): mounted filesystem 9f708434-97f9-409d-bdc9-e3e330ed09a6 r/w with ordered data mode. Quota mode: disabled. Jun 30 05:10:14.761691 [ 20.670200] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k Jun 30 05:10:14.857715 Mounting local filesystems...done. Jun 30 05:10:15.109653 Activating swapfile swap, if any...done. Jun 30 05:10:15.109706 Cleaning up temporary files.... Jun 30 05:10:15.145669 Starting Setting kernel variables: sysctl. Jun 30 05:10:15.349629 [ 22.515860] xenbr0: port 1(eth0) entered blocking state Jun 30 05:10:16.705730 [ 22.519720] xenbr0: port 1(eth0) entered disabled state Jun 30 05:10:16.705798 [ 22.525076] asix 1-3.2.4:1.0 eth0: entered allmulticast mode Jun 30 05:10:16.717689 [ 22.530887] asix 1-3.2.4:1.0 eth0: entered promiscuous mode Jun 30 05:10:16.717757 [ 22.541446] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Jun 30 05:10:16.729679 Configuring network interfaces...RTNETLINK answers: Operation not supported Jun 30 05:10:18.601688 Jun 30 05:10:18.601735 Waiting for xenbr0 to get ready (MAXWAIT is 2 seconds). Jun 30 05:10:18.601762 [ 24.729329] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 30 05:10:18.913713 [ 24.735399] xenbr0: port 1(eth0) entered blocking state Jun 30 05:10:18.925697 [ 24.740566] xenbr0: port 1(eth0) entered forwarding state Jun 30 05:10:18.925730 done. Jun 30 05:10:19.117641 Cleaning up temporary files.... Jun 30 05:10:19.189658 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Jun 30 05:10:19.369707 Starting nftables: none Jun 30 05:10:19.369742 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Jun 30 05:10:19.477693 failed! Jun 30 05:10:19.477752 startpar: service(s) returned failure: nftables ... failed! Jun 30 05:10:19.489665 INIT: Entering runlevel: 2 Jun 30 05:10:19.501650 Using makefile-style concurrent boot in runlevel 2. Jun 30 05:10:19.525652 Starting Apache httpd web server: apache2AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.149.64.44. Set the 'ServerName' directive globally to suppress this message Jun 30 05:10:20.389686 . Jun 30 05:10:21.445646 Starting NTP server: ntpd2000-01-02T00:00:48 ntpd[1140]: INIT: ntpd ntpsec-1.2.2: Starting Jun 30 05:10:21.925742 2000-01-02T00:00:48 ntpd[1140]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 30 05:10:21.937671 . Jun 30 05:10:21.937726 Starting SMP IRQ Balancer: irqbalance. Jun 30 05:10:22.141656 Starting system message bus: dbus. Jun 30 05:10:22.621657 Starting OpenBSD Secure Shell server: sshd. Jun 30 05:10:23.293741 Starting /usr/local/sbin/xenstored... Jun 30 05:10:25.753833 Setting domain 0 name, domid and JSON config... Jun 30 05:10:25.753916 Done setting up Dom0 Jun 30 05:10:25.753957 Starting xenconsoled... Jun 30 05:10:25.765708 Starting QEMU as disk backend for dom0 Jun 30 05:10:25.765767 Jun 30 05:10:26.857714 Debian GNU/Linux 12 arndale-metrocentre hvc0 Jun 30 05:10:26.869694 Jun 30 05:10:26.869745 arndale-metrocentre login: [ 93.318142] sd 0:0:0:0: [sda] Synchronizing SCSI cache Jun 30 05:11:27.508515 [ 93.344759] wake enabled for irq 119 (gpx1-4) Jun 30 05:11:27.532748 [ 93.347758] wake enabled for irq 120 (gpx1-5) Jun 30 05:11:27.532824 [ 93.352241] wake enabled for irq 121 (gpx1-6) Jun 30 05:11:27.544608 [ 93.356607] wake enabled for irq 122 (gpx1-7) Jun 30 05:11:27.544608 [ 93.361043] wake enabled for irq 123 (gpx2-0) Jun 30 05:11:27.556575 [ 93.365485] wake enabled for irq 124 (gpx2-1) Jun 30 05:11:27.556575 [ 93.370226] reboot: Resô Jun 30 05:11:27.892565 Jun 30 05:11:27.892565 Jun 30 05:11:27.892565 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 05:11:27.892565 Jun 30 05:11:27.892565 CPU: Exynos5250@1000MHz Jun 30 05:11:27.904590 Jun 30 05:11:27.904590 Board: Arndale Jun 30 05:11:27.904590 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 05:11:27.904590 ready Jun 30 05:11:27.904590 DRAM: 2 GiB Jun 30 05:11:27.904590 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 05:11:27.928552 trace: enabled Jun 30 05:11:27.964541 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 05:11:28.324555 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 05:11:28.384591 In: serial Jun 30 05:11:28.384591 Out: serial Jun 30 05:11:28.384591 Err: serial Jun 30 05:11:28.384591 SCSI: ARNDALE SCSI INIT Jun 30 05:11:28.384591 Target spinup took 0 ms. Jun 30 05:11:28.396775 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 05:11:28.396855 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 05:11:28.408604 Net: Net Initialization Skipped Jun 30 05:11:28.408604 No ethernet found. Jun 30 05:11:28.408604 Hostname: arndale-metrocentre Jun 30 05:11:28.408604 Hit any key to stop autoboot: 2  1  0 Jun 30 05:11:30.337649 (Re)start USB... Jun 30 05:11:30.337697 USB0: USB EHCI 1.00 Jun 30 05:11:30.337721 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 05:11:35.937749 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 05:11:35.949707 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 05:11:36.393717 Waiting for Ethernet connection... done. Jun 30 05:11:37.989825 BOOTP broadcast 1 Jun 30 05:11:37.989902 BOOTP broadcast 2 Jun 30 05:11:39.573796 DHCP client bound to address 10.149.64.44 (1657 ms) Jun 30 05:11:39.585837 Using asx0 device Jun 30 05:11:39.585893 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 05:11:39.585943 Filename 'pxelinux.0'. Jun 30 05:11:39.585985 Load address: 0x43e00000 Jun 30 05:11:39.597779 Loading: *### Jun 30 05:11:39.609783 2.4 MiB/s Jun 30 05:11:39.609838 done Jun 30 05:11:39.609878 Bytes transferred = 42430 (a5be hex) Jun 30 05:11:39.609922 missing environment variable: pxeuuid Jun 30 05:11:39.621825 Retrieving file: pxelinux.cfg/0A95402C Jun 30 05:11:39.621884 Using asx0 device Jun 30 05:11:39.621926 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 05:11:39.633833 Filename 'pxelinux.cfg/0A95402C'. Jun 30 05:11:39.633892 Load address: 0x51000000 Jun 30 05:11:39.633936 Loading: *# Jun 30 05:11:39.633976 358.4 KiB/s Jun 30 05:11:39.634016 done Jun 30 05:11:39.634054 Bytes transferred = 734 (2de hex) Jun 30 05:11:39.645832 Config file found Jun 30 05:11:39.645888 Ignoring unknown command: serial Jun 30 05:11:39.645933 1: ^Overwrite Jun 30 05:11:39.645974 Retrieving file: /osstest/tmp//arndale-metrocentre--initrd.gz Jun 30 05:11:39.657824 Using asx0 device Jun 30 05:11:39.657880 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 05:11:39.657929 Filename '/osstest/tmp//arndale-metrocentre--initrd.gz'. Jun 30 05:11:39.669739 Load address: 0x43300000 Jun 30 05:11:39.669796 Loading: *################################################################# Jun 30 05:11:39.993701 ################################################################# Jun 30 05:11:40.317764 ################################################################# Jun 30 05:11:40.641749 ################################################################# Jun 30 05:11:40.953709 ################################################################# Jun 30 05:11:41.253675 ################################################################# Jun 30 05:11:41.565670 ################################################################# Jun 30 05:11:41.853595 ################################################################# Jun 30 05:11:42.129690 ################################################################# Jun 30 05:11:42.429624 ################################################################# Jun 30 05:11:42.729625 ################################################################# Jun 30 05:11:43.029667 ################################################################# Jun 30 05:11:43.329696 ################################################################# Jun 30 05:11:43.629666 ################################################################# Jun 30 05:11:43.929667 ################################################################# Jun 30 05:11:44.193788 ################################################################# Jun 30 05:11:44.481628 ################################################################# Jun 30 05:11:44.781693 ################################################################# Jun 30 05:11:45.081692 ################################################################# Jun 30 05:11:45.381648 ################################################################# Jun 30 05:11:45.681749 ################################################################# Jun 30 05:11:45.981683 ################################################################# Jun 30 05:11:46.281764 ################################################################# Jun 30 05:11:46.581777 ################################################################# Jun 30 05:11:46.893671 ################################################################# Jun 30 05:11:47.193674 ################################################################# Jun 30 05:11:47.493669 ################################################################# Jun 30 05:11:47.793689 ###################################### Jun 30 05:11:47.973705 2.9 MiB/s Jun 30 05:11:47.973761 done Jun 30 05:11:47.973801 Bytes transferred = 26310350 (19176ce hex) Jun 30 05:11:47.973847 Retrieving file: /osstest/debian-installer/armhf/2024-03-26-bookworm/linux Jun 30 05:11:47.985727 Using asx0 device Jun 30 05:11:47.985783 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 05:11:47.997745 Filename '/osstest/debian-installer/armhf/2024-03-26-bookworm/linux'. Jun 30 05:11:47.997809 Load address: 0x42000000 Jun 30 05:11:47.997853 Loading: *################################################################# Jun 30 05:11:48.333773 ################################################################# Jun 30 05:11:48.657613 ################################################################# Jun 30 05:11:48.981760 ################################################################# Jun 30 05:11:49.305872 ################################################################# Jun 30 05:11:49.629631 ############################################# Jun 30 05:11:49.845781 2.7 MiB/s Jun 30 05:11:49.845841 done Jun 30 05:11:49.845882 Bytes transferred = 5423616 (52c200 hex) Jun 30 05:11:49.857842 append: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-metrocentre url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=50302 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-metrocentre--initrd.gz --- console=ttySAC2,115200n8 Jun 30 05:11:49.893885 Retrieving file: /osstest/debian-installer/armhf/2024-03-26-bookworm/dtbs/exynos5250-arndale.dtb Jun 30 05:11:49.905854 Using asx0 device Jun 30 05:11:49.905932 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 05:11:49.917868 Filename '/osstest/debian-installer/armhf/2024-03-26-bookworm/dtbs/exynos5250-arndale.dtb'. Jun 30 05:11:49.917954 Load address: 0x43000000 Jun 30 05:11:49.917998 Loading: *#### Jun 30 05:11:49.941807 2.3 MiB/s Jun 30 05:11:49.941862 done Jun 30 05:11:49.941902 Bytes transferred = 46686 (b65e hex) Jun 30 05:11:49.941947 Kernel image @ 0x42000000 [ 0x000000 - 0x52c200 ] Jun 30 05:11:49.953836 ## Flattened Device Tree blob at 43000000 Jun 30 05:11:49.953894 Booting using the fdt blob at 0x43000000 Jun 30 05:11:49.953939 Loading Ramdisk to 4e6e8000, end 4ffff6ce ... OK Jun 30 05:11:50.385693 Loading Device Tree to 4e6d9000, end 4e6e765d ... OK Jun 30 05:11:50.385732 Jun 30 05:11:50.397722 Starting kernel ...(fake run for tracing) Jun 30 05:11:50.397754 Jun 30 05:11:50.397775 Jun 30 05:11:50.397795 Starting kernel ... Jun 30 05:11:50.397817 Jun 30 05:11:50.397836 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 05:11:56.501784 [ 0.000000] Linux version 6.1.0-18-armmp (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.76-1 (2024-02-01) Jun 30 05:11:56.513787 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 30 05:11:56.525775 [ 0.000000] CPU: div instructions available: patching division code Jun 30 05:11:56.525838 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 05:11:56.537770 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 05:11:56.549763 [ 0.000000] Memory policy: Data cache writealloc Jun 30 05:11:56.549822 [ 0.000000] efi: UEFI not found. Jun 30 05:11:56.549866 [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 Jun 30 05:11:56.561758 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 05:11:56.561817 [ 0.000000] Zone ranges: Jun 30 05:11:56.561860 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Jun 30 05:11:56.573769 [ 0.000000] Normal empty Jun 30 05:11:56.573826 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Jun 30 05:11:56.573875 [ 0.000000] Movable zone start for each node Jun 30 05:11:56.585760 [ 0.000000] Early memory node ranges Jun 30 05:11:56.585817 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 05:11:56.597760 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 05:11:56.597825 [ 0.000000] percpu: Embedded 18 pages/cpu s41620 r8192 d23916 u73728 Jun 30 05:11:56.609761 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Jun 30 05:11:56.609825 [ 0.000000] Kernel command line: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-metrocentre url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=50302 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-metrocentre--initrd.gz --- console=ttySAC2,115200n8 Jun 30 05:11:56.657771 [ 0.000000] Unknown kernel command line parameters "preseed --- vga=normal auto=true hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=50302 domain=test-lab.xenproject.org", will be passed to user space. Jun 30 05:11:56.693770 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Jun 30 05:11:56.705771 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 05:11:56.705838 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Jun 30 05:11:56.717800 [ 0.000000] Memory: 2015996K/2097152K available (11264K kernel code, 1696K rwdata, 3716K rodata, 2048K init, 378K bss, 64772K reserved, 16384K cma-reserved, 1294332K highmem) Jun 30 05:11:56.729793 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 05:11:56.741764 [ 0.000000] ftrace: allocating 39582 entries in 117 pages Jun 30 05:11:56.741825 [ 0.000000] ftrace: allocated 116 pages with 4 groups Jun 30 05:11:56.753757 [ 0.000000] trace event string verifier disabled Jun 30 05:11:56.753816 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 05:11:56.753863 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Jun 30 05:11:56.765777 [ 0.000000] Rude variant of Tasks RCU enabled. Jun 30 05:11:56.765837 [ 0.000000] Tracing variant of Tasks RCU enabled. Jun 30 05:11:56.777775 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Jun 30 05:11:56.777843 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 05:11:56.789784 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 05:11:56.789846 [ 0.000000] GIC: Using split EOI/Deactivate mode Jun 30 05:11:56.801768 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 05:11:56.801832 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 05:11:56.813760 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Jun 30 05:11:56.813822 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Jun 30 05:11:56.825788 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Jun 30 05:11:56.837774 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Jun 30 05:11:56.837841 [ 0.002638] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Jun 30 05:11:56.849772 [ 0.002652] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 05:11:56.861769 [ 0.002666] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 05:11:56.873769 [ 0.002678] Ignoring duplicate/late registration of read_current_timer delay Jun 30 05:11:56.873834 [ 0.003049] Console: colour dummy device 80x30 Jun 30 05:11:56.873881 [ 0.003090] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Jun 30 05:11:56.885774 [ 0.003104] CPU: Testing write buffer coherency: ok Jun 30 05:11:56.897771 [ 0.003146] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 05:11:56.909940 [ 0.003153] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 05:11:56.910004 [ 0.003159] pid_max: default: 32768 minimum: 301 Jun 30 05:11:56.910051 [ 0.003514] LSM: Security Framework initializing Jun 30 05:11:56.921742 [ 0.003585] landlock: Up and running. Jun 30 05:11:56.921799 [ 0.003589] Yama: disabled by default; enable with sysctl kernel.yama.* Jun 30 05:11:56.933757 [ 0.003776] AppArmor: AppArmor initialized Jun 30 05:11:56.933816 [ 0.003788] TOMOYO Linux initialized Jun 30 05:11:56.933861 [ 0.003829] LSM support for eBPF active Jun 30 05:11:56.945767 [ 0.004070] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 05:11:56.945836 [ 0.004085] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 05:11:56.957761 [ 0.005519] /cpus/cpu@0 missing clock-frequency property Jun 30 05:11:56.957822 [ 0.005546] /cpus/cpu@1 missing clock-frequency property Jun 30 05:11:56.969763 [ 0.005559] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 05:11:56.969825 [ 0.006512] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 05:11:56.981771 [ 0.006519] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 05:11:56.981851 [ 0.006622] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 05:11:56.993768 [ 0.006628] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 05:11:56.993830 [ 0.006774] Setting up static identity map for 0x40300000 - 0x403000ac Jun 30 05:11:57.005766 [ 0.007938] rcu: Hierarchical SRCU implementation. Jun 30 05:11:57.005827 [ 0.007944] rcu: Max phase no-delay instances is 1000. Jun 30 05:11:57.017763 [ 0.010081] EFI services will not be available. Jun 30 05:11:57.017823 [ 0.010427] smp: Bringing up secondary CPUs ... Jun 30 05:11:57.029747 [ 0.011175] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 05:11:57.029809 [ 0.011187] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 05:11:57.041774 [ 0.011317] smp: Brought up 1 node, 2 CPUs Jun 30 05:11:57.041832 [ 0.011325] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 05:11:57.053751 [ 0.011332] CPU: All CPU(s) started in HYP mode. Jun 30 05:11:57.053811 [ 0.011336] CPU: Virtualization extensions available. Jun 30 05:11:57.053859 [ 0.011964] devtmpfs: initialized Jun 30 05:11:57.065761 [ 0.023071] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 05:11:57.065830 [ 0.023319] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Jun 30 05:11:57.077778 [ 0.023344] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 05:11:57.089761 [ 0.023820] pinctrl core: initialized pinctrl subsystem Jun 30 05:11:57.089822 [ 0.024548] DMI not present or invalid. Jun 30 05:11:57.101772 [ 0.025227] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 05:11:57.101836 [ 0.030603] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 05:11:57.113757 [ 0.032167] audit: initializing netlink subsys (disabled) Jun 30 05:11:57.113819 [ 0.032370] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 Jun 30 05:11:57.125760 [ 0.033542] thermal_sys: Registered thermal governor 'fair_share' Jun 30 05:11:57.125823 [ 0.033549] thermal_sys: Registered thermal governor 'bang_bang' Jun 30 05:11:57.137763 [ 0.033554] thermal_sys: Registered thermal governor 'step_wise' Jun 30 05:11:57.137826 [ 0.033558] thermal_sys: Registered thermal governor 'user_space' Jun 30 05:11:57.149764 [ 0.033563] thermal_sys: Registered thermal governor 'power_allocator' Jun 30 05:11:57.149827 [ 0.033928] No ATAGs? Jun 30 05:11:57.149870 [ 0.033997] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jun 30 05:11:57.161781 [ 0.034005] hw-breakpoint: maximum watchpoint size is 8 bytes. Jun 30 05:11:57.173760 [ 0.035098] Serial: AMBA PL011 UART driver Jun 30 05:11:57.173820 [ 0.091484] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Jun 30 05:11:57.185770 [ 0.102439] iommu: Default domain type: Translated Jun 30 05:11:57.185830 [ 0.102446] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 05:11:57.197748 [ 0.103419] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Jun 30 05:11:57.197811 [ 0.103973] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 05:11:57.197859 [ 0.103985] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 05:11:57.209766 [ 0.104629] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 05:11:57.221765 [ 0.104659] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 05:11:57.221834 [ 0.104842] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 05:11:57.233772 [ 0.105197] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 05:11:57.233833 [ 0.105208] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 05:11:57.245754 [ 0.105600] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 05:11:57.245815 [ 0.105889] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 05:11:57.257779 [ 0.105898] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 05:11:57.257844 [ 0.106172] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 05:11:57.269762 [ 0.106273] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 05:11:57.269823 [ 0.106282] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 05:11:57.269871 [ 0.106479] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 05:11:57.281763 [ 0.106677] pps_core: LinuxPPS API ver. 1 registered Jun 30 05:11:57.281824 [ 0.106682] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 05:11:57.293783 [ 0.106698] PTP clock support registered Jun 30 05:11:57.293841 [ 0.108189] NetLabel: Initializing Jun 30 05:11:57.305752 [ 0.108194] NetLabel: domain hash size = 128 Jun 30 05:11:57.305811 [ 0.108200] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Jun 30 05:11:57.305860 [ 0.108272] NetLabel: unlabeled traffic allowed by default Jun 30 05:11:57.317831 [ 0.108433] vgaarb: loaded Jun 30 05:11:57.317887 [ 0.109104] clocksource: Switched to clocksource mct-frc Jun 30 05:11:57.329748 [ 0.177867] VFS: Disk quotas dquot_6.6.0 Jun 30 05:11:57.329807 [ 0.177959] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jun 30 05:11:57.341762 [ 0.178697] AppArmor: AppArmor Filesystem Enabled Jun 30 05:11:57.341824 [ 0.187757] NET: Registered PF_INET protocol family Jun 30 05:11:57.341872 [ 0.187965] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Jun 30 05:11:57.353785 [ 0.189596] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 05:11:57.365763 [ 0.189686] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 05:11:57.365831 [ 0.189710] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Jun 30 05:11:57.377783 [ 0.189804] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Jun 30 05:11:57.389757 [ 0.190033] TCP: Hash tables configured (established 8192 bind 8192) Jun 30 05:11:57.389823 [ 0.190253] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Jun 30 05:11:57.401772 [ 0.190338] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 05:11:57.401835 [ 0.190377] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 05:11:57.413766 [ 0.190579] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 05:11:57.413829 [ 0.190612] NET: Registered PF_XDP protocol family Jun 30 05:11:57.425763 [ 0.190622] PCI: CLS 0 bytes, default 64 Jun 30 05:11:57.425822 [ 0.191134] Trying to unpack rootfs image as initramfs... Jun 30 05:11:57.425871 [ 0.191550] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Jun 30 05:11:57.437770 [ 0.191757] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Jun 30 05:11:57.449781 [ 0.193372] Initialise system trusted keyrings Jun 30 05:11:57.449840 [ 0.193447] Key type blacklist registered Jun 30 05:11:57.449885 [ 0.193673] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Jun 30 05:11:57.461761 [ 0.200863] zbud: loaded Jun 30 05:11:57.461817 [ 0.202005] integrity: Platform Keyring initialized Jun 30 05:11:57.473745 [ 0.202035] integrity: Machine keyring initialized Jun 30 05:11:57.473806 [ 0.202043] Key type asymmetric registered Jun 30 05:11:57.473851 [ 0.202049] Asymmetric key parser 'x509' registered Jun 30 05:11:57.485768 [ 1.561584] Freeing initrd memory: 25696K Jun 30 05:11:57.485827 [ 1.573429] alg: self-tests for CTR-KDF (hmac(sha256)) passed Jun 30 05:11:57.497762 [ 1.573717] bounce: pool size: 64 pages Jun 30 05:11:57.497822 [ 1.573880] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Jun 30 05:11:57.497877 [ 1.574048] io scheduler mq-deadline registered Jun 30 05:11:57.509817 [ 1.579192] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Jun 30 05:11:57.521775 [ 1.600051] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 05:11:57.521846 [ 1.600064] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 05:11:57.533776 [ 1.602404] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 05:11:57.545755 [ 1.602414] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 05:11:57.545827 [ 1.603202] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 05:11:57.557769 [ 1.603211] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 05:11:57.569882 [ 1.604036] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 05:11:57.569918 [ 1.604045] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 05:11:57.581839 [ 1.606430] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 05:11:57.593773 [ 1.609241] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 05:11:57.593835 [ 1.611960] Serial: AMBA driver Jun 30 05:11:57.605768 [ 1.612206] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 05:11:57.605839 [ 1.612695] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 05:11:57.617745 [ 1.613181] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 05:11:57.629764 [ 2.744072] printk: console [ttySAC2] enabled Jun 30 05:11:57.629823 [ 2.748889] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Jun 30 05:11:57.641763 [ 2.759565] STM32 USART driver initialized Jun 30 05:11:57.641821 [ 2.773755] mousedev: PS/2 mouse device common for all mice Jun 30 05:11:57.665702 [ 2.804893] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 05:11:57.689658 [ 2.813525] s5m-rtc s5m-rtc: setting system clock to 2000-01-02T00:02:25 UTC (946771345) Jun 30 05:11:57.701763 [ 2.823355] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Jun 30 05:11:57.713758 [ 2.830844] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 05:11:57.725710 [ 2.838822] NET: Registered PF_INET6 protocol family Jun 30 05:11:57.725772 [ 2.852675] Segment Routing with IPv6 Jun 30 05:11:57.737753 [ 2.854942] In-situ OAM (IOAM) with IPv6 Jun 30 05:11:57.737812 [ 2.858865] mip6: Mobile IPv6 Jun 30 05:11:57.749754 [ 2.861751] NET: Registered PF_PACKET protocol family Jun 30 05:11:57.749816 [ 2.866898] mpls_gso: MPLS GSO support Jun 30 05:11:57.749861 [ 2.871112] ThumbEE CPU extension supported. Jun 30 05:11:57.761771 [ 2.874781] Registering SWP/SWPB emulation handler Jun 30 05:11:57.761832 [ 2.880009] registered taskstats version 1 Jun 30 05:11:57.773719 [ 2.883643] Loading compiled-in X.509 certificates Jun 30 05:11:57.773781 [ 3.340269] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Jun 30 05:11:58.229784 [ 3.347607] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Jun 30 05:11:58.241774 [ 3.358649] zswap: loaded using pool lzo/zbud Jun 30 05:11:58.241833 [ 3.362614] Key type .fscrypt registered Jun 30 05:11:58.253736 [ 3.365943] Key type fscrypt-provisioning registered Jun 30 05:11:58.253796 [ 3.379774] Key type encrypted registered Jun 30 05:11:58.265749 [ 3.382370] AppArmor: AppArmor sha1 policy hashing enabled Jun 30 05:11:58.277763 [ 3.387829] ima: No TPM chip found, activating TPM-bypass! Jun 30 05:11:58.277826 [ 3.393291] ima: Allocated hash algorithm: sha256 Jun 30 05:11:58.277873 [ 3.398014] ima: No architecture policies found Jun 30 05:11:58.289775 [ 3.402546] evm: Initialising EVM extended attributes: Jun 30 05:11:58.289837 [ 3.407597] evm: security.selinux Jun 30 05:11:58.289900 [ 3.410886] evm: security.SMACK64 (disabled) Jun 30 05:11:58.301755 [ 3.415136] evm: security.SMACK64EXEC (disabled) Jun 30 05:11:58.301815 [ 3.419737] evm: security.SMACK64TRANSMUTE (disabled) Jun 30 05:11:58.313771 [ 3.424771] evm: security.SMACK64MMAP (disabled) Jun 30 05:11:58.313832 [ 3.429372] evm: security.apparmor Jun 30 05:11:58.313876 [ 3.432743] evm: security.ima Jun 30 05:11:58.325741 [ 3.435708] evm: security.capability Jun 30 05:11:58.325800 [ 3.439273] evm: HMAC attrs: 0x1 Jun 30 05:11:58.325844 [ 4.022470] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 05:11:58.913719 [ 4.048782] Freeing unused kernel image (initmem) memory: 2048K Jun 30 05:11:58.937697 [ 4.053647] Checked W+X mappings: passed, no W+X pages found Jun 30 05:11:58.937733 [ 4.058904] Run /init as init process Jun 30 05:11:58.949657 [ 4.627138] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 05:11:59.513747 [ 4.693735] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 05:11:59.585734 [ 4.713318] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 05:11:59.609727 [ 4.725402] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 05:11:59.621733 [ 4.734177] usbcore: registered new interface driver usbfs Jun 30 05:11:59.621795 [ 4.743037] usbcore: registered new interface driver hub Jun 30 05:11:59.633736 [ 4.747613] usbcore: registered new device driver usb Jun 30 05:11:59.633796 [ 4.759069] phy phy-12130000.phy.1: phy_power_on was called before phy_init Jun 30 05:11:59.645750 [ 4.781306] phy phy-12130000.phy.1: phy_power_on was called before phy_init Jun 30 05:11:59.669724 [ 4.788113] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 05:11:59.681703 [ 4.810982] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Jun 30 05:11:59.705703 [ 4.831620] exynos-ohci 12120000.usb: USB Host Controller Jun 30 05:11:59.717751 [ 4.836577] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Jun 30 05:11:59.729756 [ 4.856616] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 05:11:59.741727 [ 4.868648] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 05:11:59.753749 [ 4.873452] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 05:11:59.765782 [ 4.881508] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 05:11:59.777787 [ 4.888697] usb usb1: Product: EHCI Host Controller Jun 30 05:11:59.792583 [ 4.893543] usb usb1: Manufacturer: Linux 6.1.0-18-armmp ehci_hcd Jun 30 05:11:59.792729 [ 4.899605] usb usb1: SerialNumber: 12110000.usb Jun 30 05:11:59.792806 [ 4.909148] usb3503 usb-hub: switched to HUB mode Jun 30 05:11:59.801731 [ 4.912382] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 05:11:59.801794 [ 4.922831] hub 1-0:1.0: USB hub found Jun 30 05:11:59.813711 [ 4.930166] hub 1-0:1.0: 3 ports detected Jun 30 05:11:59.813770 [ 4.937881] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Jun 30 05:11:59.825755 [ 4.949063] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Jun 30 05:11:59.837727 [ 5.018487] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Jun 30 05:11:59.909778 [ 5.025339] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 05:11:59.921772 [ 5.032529] usb usb2: Product: USB Host Controller Jun 30 05:11:59.921832 [ 5.037322] usb usb2: Manufacturer: Linux 6.1.0-18-armmp ohci_hcd Jun 30 05:11:59.933714 [ 5.043367] usb usb2: SerialNumber: 12120000.usb Jun 30 05:11:59.933776 [ 5.080466] hub 2-0:1.0: USB hub found Jun 30 05:11:59.969741 [ 5.083005] hub 2-0:1.0: 3 ports detected Jun 30 05:11:59.969799 [ 5.145694] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 05:12:00.029761 [ 5.149761] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 05:12:00.041808 [ 5.157982] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 Jun 30 05:12:00.053757 [ 5.166799] xhci-hcd xhci-hcd.2.auto: irq 108, io mem 0x12000000 Jun 30 05:12:00.053819 [ 5.172972] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 05:12:00.065787 [ 5.178341] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 05:12:00.065855 [ 5.185903] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 05:12:00.077768 [ 5.193690] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 05:12:00.089764 [ 5.200595] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 05:12:00.089832 [ 5.207804] usb usb3: Product: xHCI Host Controller Jun 30 05:12:00.101801 [ 5.212657] usb usb3: Manufacturer: Linux 6.1.0-18-armmp xhci-hcd Jun 30 05:12:00.101865 [ 5.218738] usb usb3: SerialNumber: xhci-hcd.2.auto Jun 30 05:12:00.113845 [ 5.224138] hub 3-0:1.0: USB hub found Jun 30 05:12:00.113904 [ 5.227380] hub 3-0:1.0: 1 port detected Jun 30 05:12:00.113950 [ 5.231770] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 05:12:00.125812 [ 5.239454] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Jun 30 05:12:00.137793 [ 5.241148] usb 1-3: new high-speed USB device number 2 using exynos-ehci Jun 30 05:12:00.137859 [ 5.247561] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 05:12:00.149761 [ 5.261529] usb usb4: Product: xHCI Host Controller Jun 30 05:12:00.149820 [ 5.266386] usb usb4: Manufacturer: Linux 6.1.0-18-armmp xhci-hcd Jun 30 05:12:00.161752 [ 5.272466] usb usb4: SerialNumber: xhci-hcd.2.auto Jun 30 05:12:00.161813 [ 5.277968] hub 4-0:1.0: USB hub found Jun 30 05:12:00.161858 [ 5.281067] hub 4-0:1.0: 1 port detected Jun 30 05:12:00.173731 [ 5.413558] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Jun 30 05:12:00.305859 [ 5.420298] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jun 30 05:12:00.317815 [ 5.428753] hub 1-3:1.0: USB hub found Jun 30 05:12:00.317876 [ 5.431307] hub 1-3:1.0: 3 ports detected Jun 30 05:12:00.317922 Starting system log daemon: syslogd, klogd. Jun 30 05:12:00.461693 /var/run/utmp: No such file or directory Jun 30 05:12:02.285781 [?1h=(B   Jun 30 05:12:02.333772  Jun 30 05:12:02.345749 [  (-*) ][ Jan 02  0:02 ] Jun 30 05:12:02.357767 [  (0*start) ][ Jan 02  0:02 ] Jun 30 05:12:02.369781 [  (0*start) ][ Jan 02  0:02 ] Jun 30 05:12:02.381780 [  (0*start) ][ Jan 02  0:02 ] Jun 30 05:12:02.393773 [  (0*start) ][ Jan 02  0:02 ]                        [  (0*start) ][ Jan 02  0:02 ][  (0*start) ][ Jan 02  0:02 ] Jun 30 05:12:02.453771 [ 0- start  (2*shell) ][ Jan 02  0:02 ] Jun 30 05:12:02.465768 [ 0- start  (2*shell) ][ Jan 02  0:02 ] Jun 30 05:12:02.477761 [ 0- start  (2*shell) ][ Jan 02  0:02 ] Jun 30 05:12:02.489736 [ 0- start  (2*shell) ][ Jan 02  0:02 ]                        [ 0- start  (2*shell) ][ Jan 02  0:02 ][ 0- start  (2*shell) ][ Jan 02  0:02 ] Jun 30 05:12:02.549764 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:02 ] Jun 30 05:12:02.561761 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:02 ] Jun 30 05:12:02.573772 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:02 ] Jun 30 05:12:02.585791 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:02 ]                        [ 0 start 2- shell  (3*shell) ][ Jan 02  0:02 ][ 0 start 2- shell  (3*shell) ][ Jan 02  0:02 ] Jun 30 05:12:02.645774 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:02 ] Jun 30 05:12:02.657708 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:02 ] Jun 30 05:12:02.669790 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:02 ] Jun 30 05:12:02.681781 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:02 ]                        [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:02 ][ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:02 ] Jun 30 05:12:02.741778 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:02 ] Jun 30 05:12:02.753835 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:02 ] Jun 30 05:12:02.765848 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:02 ] Jun 30 05:12:02.789710 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:02 ]                        [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:02 ][ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:02 ] Jun 30 05:12:02.837773 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:02 ] Jun 30 05:12:02.849777 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:02 ] Jun 30 05:12:02.873694 [  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:02 ] Jun 30 05:12:03.329698 Detecting network hardware ... 2%... 95%... 100% Jun 30 05:12:05.069696 Detecting link on eth0; please wait... ... 0%... 10%... 20% Jun 30 05:12:09.960533 Waiting for link-local address... ... 8%... 16%... 25%... 33%... 41%... 100% Jun 30 05:12:11.253756 Attempting IPv6 autoconfiguration... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 75%... 83%... 91%... 100% Jun 30 05:12:17.328765 Configuring the network with DHCP ... 0%... 100% Jun 30 05:12:20.484788 Checking the Debian archive mirror ... 25%... 50%... 75%... 100% Jun 30 05:12:28.700787 Loading additional components [  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:03 ]... 0%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Jun 30 05:13:02.597715 Setting up the clock ... 0%... 3%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  5:13 ]... 100% Jun 30 05:13:05.381741 Loading additional components ... 50%... 100% Jun 30 05:13:07.056538 Detecting disks and all other hardware ... 2%... 95%... 100% Jun 30 05:13:14.884587 Loading additional components ... 5%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Jun 30 05:13:23.684535 Loading additional components ... 25%... 50%... 75%... 100% Jun 30 05:13:26.073615 Starting up the partitioner ... 4%... 13%... 21%... 30%... 43%... 52%... 60%... 73%... 82%... 91%... 100% Jun 30 05:13:36.748501 Guided partitioning ... 16%... 33%... 50%... 66%... 83%... 100% Jun 30 05:13:45.397689 Starting up the partitioner ... 4%... 12%... 20%... 32%... 40%... 52%... 60%... 72%... 80%... 92%... 100% Jun 30 05:13:59.285651 [  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  5:14 ] Partitions formatting ... 33% Jun 30 05:14:08.141641 Partitions formatting Jun 30 05:14:17.517707 Partitions formatting Installing the base system ... 0%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  5:15 ]... 17%... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  5:16 ]... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  5:17 ]... 48%... 50%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  5:18 ]...  Jun 30 05:18:07.369800  60%... 70%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  5:19 ]... 79%... 83%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  5:20 ][  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  5:21 ]... 91%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  5:22 ]... 100% Jun 30 05:22:35.865702 Configuring apt ... 7%... 14%... 14%... 21%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  5:23 ]... 35%... 42%... 50%... 60%... 71%. Jun 30 05:23:13.693687 ... 82%... 92%... 100% Jun 30 05:23:16.372510 Select and install software ... 1%... 10%... 13%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  5:24 ]... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  5:25 ]... 40%... 50%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  5:26 ]... Jun 30 05:26:07.569711 . 60%... 70%... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  5:27 ]... 88%... 90%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  5:28 ]... 94%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  5:29 ]... 100% Jun 30 05:29:20.893715 Finishing the installation ... 4%... 12%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  5:30 ][  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  5:31 ]... 16%... 20%... 32%... 40%... 44%... Jun 30 05:31:08.777726  52%... 60%... 72%... 80%... 92% The system is going down NOW! Sent SIGKILL to all processes Jun 30 05:31:19.869617 Requesting system reboot Jun 30 05:31:19.869617 [ 1166.017490] reboot: Re˙ Jun 30 05:31:21.225616 Jun 30 05:31:21.225616 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 05:31:21.237671 Jun 30 05:31:21.237671 CPU: Exynos5250@1000MHz Jun 30 05:31:21.237671 Jun 30 05:31:21.237671 Board: Arndale Jun 30 05:31:21.237671 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 05:31:21.249757 ready Jun 30 05:31:21.249775 DRAM: 2 GiB Jun 30 05:31:21.249775 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 05:31:21.261627 trace: enabled Jun 30 05:31:21.297604 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 05:31:21.657619 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 05:31:21.717666 In: serial Jun 30 05:31:21.717666 Out: serial Jun 30 05:31:21.717666 Err: serial Jun 30 05:31:21.717666 SCSI: ARNDALE SCSI INIT Jun 30 05:31:21.717666 Target spinup took 0 ms. Jun 30 05:31:21.729667 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 05:31:21.729667 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 05:31:21.741670 Net: Net Initialization Skipped Jun 30 05:31:21.741670 No ethernet found. Jun 30 05:31:21.741670 Hostname: arndale-metrocentre Jun 30 05:31:21.741670 Hit any key to stop autoboot: 2  1  0 Jun 30 05:31:23.673636 (Re)start USB... Jun 30 05:31:23.673636 USB0: USB EHCI 1.00 Jun 30 05:31:23.673636 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 05:31:29.277666 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 05:31:29.277666 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 05:31:29.721721 Waiting for Ethernet connection... done. Jun 30 05:31:31.557702 BOOTP broadcast 1 Jun 30 05:31:31.557768 BOOTP broadcast 2 Jun 30 05:31:33.364556 DHCP client bound to address 10.149.64.44 (1885 ms) Jun 30 05:31:33.376592 Using asx0 device Jun 30 05:31:33.376592 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 05:31:33.388620 Filename 'pxelinux.0'. Jun 30 05:31:33.388687 Load address: 0x43e00000 Jun 30 05:31:33.388705 Loading: *### Jun 30 05:31:33.400550 2.5 MiB/s Jun 30 05:31:33.400550 done Jun 30 05:31:33.400550 Bytes transferred = 42430 (a5be hex) Jun 30 05:31:33.412601 missing environment variable: pxeuuid Jun 30 05:31:33.412601 Retrieving file: pxelinux.cfg/0A95402C Jun 30 05:31:33.412601 Using asx0 device Jun 30 05:31:33.412601 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 05:31:33.424599 Filename 'pxelinux.cfg/0A95402C'. Jun 30 05:31:33.424599 Load address: 0x51000000 Jun 30 05:31:33.424599 Loading: *# Jun 30 05:31:33.424599 31.3 KiB/s Jun 30 05:31:33.436603 done Jun 30 05:31:33.436603 Bytes transferred = 65 (41 hex) Jun 30 05:31:33.436603 Config file found Jun 30 05:31:33.436603 Ignoring unknown command: serial Jun 30 05:31:33.436603 1: local Jun 30 05:31:33.436603 scanning bus for devices... Jun 30 05:31:33.436603 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 05:31:33.472595 Type: Hard Disk Jun 30 05:31:33.472595 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 05:31:33.484611 Found 1 device(s). Jun 30 05:31:33.484611 Jun 30 05:31:33.484611 SCSI device 0: Jun 30 05:31:33.484611 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 05:31:33.496609 Type: Hard Disk Jun 30 05:31:33.496609 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 05:31:33.496609 ... is now current device Jun 30 05:31:33.508540 Scanning scsi 0... Jun 30 05:31:33.508540 Found U-Boot script /boot.scr Jun 30 05:31:33.616503 641 bytes read in 46 ms (12.7 KiB/s) Jun 30 05:31:33.664563 ## Executing script at 50000000 Jun 30 05:31:33.676495 Loading dtbs/exynos5250-arndale.dtb Jun 30 05:31:33.676495 46686 bytes read in 423 ms (107.4 KiB/s) Jun 30 05:31:34.108522 Loading vmlinuz-6.1.0-22-armmp-lpae Jun 30 05:31:34.108522 5505536 bytes read in 190 ms (27.6 MiB/s) Jun 30 05:31:34.324554 Loading initrd.img-6.1.0-22-armmp-lpae Jun 30 05:31:34.324713 25720905 bytes read in 1974 ms (12.4 MiB/s) Jun 30 05:31:36.248605 Booting Jun 30 05:31:36.248605 Kernel image @ 0x42000000 [ 0x000000 - 0x540200 ] Jun 30 05:31:36.248605 ## Flattened Device Tree blob at 43000000 Jun 30 05:31:36.248605 Booting using the fdt blob at 0x43000000 Jun 30 05:31:36.260568 Loading Ramdisk to 4e778000, end 4ffff849 ... OK Jun 30 05:31:36.668543 Loading Device Tree to 4e769000, end 4e77765d ... OK Jun 30 05:31:36.680569 Jun 30 05:31:36.680569 Starting kernel ...(fake run for tracing) Jun 30 05:31:36.692562 Jun 30 05:31:36.692562 Jun 30 05:31:36.692562 Starting kernel ... Jun 30 05:31:36.692562 Jun 30 05:31:36.692562 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 05:31:42.833857 [ 0.000000] Linux version 6.1.0-22-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.94-1 (2024-06-21) Jun 30 05:31:42.845859 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=30c5387d Jun 30 05:31:42.857848 [ 0.000000] CPU: div instructions available: patching division code Jun 30 05:31:42.857934 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 05:31:42.869830 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 05:31:42.881794 [ 0.000000] Memory policy: Data cache writealloc Jun 30 05:31:42.881854 [ 0.000000] efi: UEFI not found. Jun 30 05:31:42.881898 [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000 Jun 30 05:31:42.893833 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 05:31:42.893892 [ 0.000000] Zone ranges: Jun 30 05:31:42.893934 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Jun 30 05:31:42.905840 [ 0.000000] Normal empty Jun 30 05:31:42.905896 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Jun 30 05:31:42.905945 [ 0.000000] Movable zone start for each node Jun 30 05:31:42.917811 [ 0.000000] Early memory node ranges Jun 30 05:31:42.917868 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 05:31:42.929832 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 05:31:42.929896 [ 0.000000] percpu: Embedded 18 pages/cpu s44756 r8192 d20780 u73728 Jun 30 05:31:42.941825 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Jun 30 05:31:42.941889 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=ttySAC2,115200n8 Jun 30 05:31:42.953848 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Jun 30 05:31:42.965845 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 05:31:42.965912 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Jun 30 05:31:42.977863 [ 0.000000] Memory: 2015520K/2097152K available (12288K kernel code, 1714K rwdata, 3748K rodata, 2048K init, 382K bss, 65248K reserved, 16384K cma-reserved, 1294332K highmem) Jun 30 05:31:42.989837 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 05:31:43.001845 [ 0.000000] ftrace: allocating 39982 entries in 118 pages Jun 30 05:31:43.001906 [ 0.000000] ftrace: allocated 118 pages with 5 groups Jun 30 05:31:43.013837 [ 0.000000] trace event string verifier disabled Jun 30 05:31:43.013897 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 05:31:43.013943 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Jun 30 05:31:43.025832 [ 0.000000] Rude variant of Tasks RCU enabled. Jun 30 05:31:43.025892 [ 0.000000] Tracing variant of Tasks RCU enabled. Jun 30 05:31:43.037836 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Jun 30 05:31:43.037904 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 05:31:43.049840 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 05:31:43.049901 [ 0.000000] GIC: Using split EOI/Deactivate mode Jun 30 05:31:43.061838 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 05:31:43.061902 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 05:31:43.073821 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Jun 30 05:31:43.073883 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Jun 30 05:31:43.085766 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Jun 30 05:31:43.097771 [ 0.000019] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Jun 30 05:31:43.097839 [ 0.002634] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Jun 30 05:31:43.109733 [ 0.002648] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 05:31:43.121780 [ 0.002663] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 05:31:43.133745 [ 0.002674] Ignoring duplicate/late registration of read_current_timer delay Jun 30 05:31:43.133830 [ 0.003036] Console: colour dummy device 80x30 Jun 30 05:31:43.133880 [ 0.003075] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Jun 30 05:31:43.145822 [ 0.003088] CPU: Testing write buffer coherency: ok Jun 30 05:31:43.157760 [ 0.003131] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 05:31:43.169761 [ 0.003139] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 05:31:43.169825 [ 0.003146] pid_max: default: 32768 minimum: 301 Jun 30 05:31:43.169872 [ 0.003504] LSM: Security Framework initializing Jun 30 05:31:43.181735 [ 0.003575] landlock: Up and running. Jun 30 05:31:43.181793 [ 0.003579] Yama: disabled by default; enable with sysctl kernel.yama.* Jun 30 05:31:43.193797 [ 0.003763] AppArmor: AppArmor initialized Jun 30 05:31:43.193855 [ 0.003775] TOMOYO Linux initialized Jun 30 05:31:43.193900 [ 0.003819] LSM support for eBPF active Jun 30 05:31:43.205768 [ 0.004064] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 05:31:43.205823 [ 0.004078] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 05:31:43.217768 [ 0.005475] /cpus/cpu@0 missing clock-frequency property Jun 30 05:31:43.217832 [ 0.005501] /cpus/cpu@1 missing clock-frequency property Jun 30 05:31:43.229748 [ 0.005514] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 05:31:43.229810 [ 0.006457] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 05:31:43.241681 [ 0.006464] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 05:31:43.241743 [ 0.006563] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 05:31:43.253732 [ 0.006569] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 05:31:43.253766 [ 0.006707] Setting up static identity map for 0x40400000 - 0x404000ac Jun 30 05:31:43.265771 [ 0.007867] rcu: Hierarchical SRCU implementation. Jun 30 05:31:43.265831 [ 0.007873] rcu: Max phase no-delay instances is 1000. Jun 30 05:31:43.277722 [ 0.009999] EFI services will not be available. Jun 30 05:31:43.277782 [ 0.010340] smp: Bringing up secondary CPUs ... Jun 30 05:31:43.289769 [ 0.011075] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 05:31:43.289832 [ 0.011087] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 05:31:43.301680 [ 0.011216] smp: Brought up 1 node, 2 CPUs Jun 30 05:31:43.301711 [ 0.011225] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 05:31:43.313888 [ 0.011232] CPU: All CPU(s) started in HYP mode. Jun 30 05:31:43.313947 [ 0.011236] CPU: Virtualization extensions available. Jun 30 05:31:43.313996 [ 0.012107] devtmpfs: initialized Jun 30 05:31:43.325764 [ 0.022984] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 05:31:43.325803 [ 0.023219] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Jun 30 05:31:43.337834 [ 0.023243] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 05:31:43.349762 [ 0.023779] pinctrl core: initialized pinctrl subsystem Jun 30 05:31:43.349829 [ 0.024526] DMI not present or invalid. Jun 30 05:31:43.361689 [ 0.025203] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 05:31:43.361724 [ 0.026743] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 05:31:43.373753 [ 0.028236] audit: initializing netlink subsys (disabled) Jun 30 05:31:43.373817 [ 0.028438] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 Jun 30 05:31:43.385739 [ 0.029615] thermal_sys: Registered thermal governor 'fair_share' Jun 30 05:31:43.385800 [ 0.029622] thermal_sys: Registered thermal governor 'bang_bang' Jun 30 05:31:43.397755 [ 0.029627] thermal_sys: Registered thermal governor 'step_wise' Jun 30 05:31:43.397846 [ 0.029631] thermal_sys: Registered thermal governor 'user_space' Jun 30 05:31:43.409696 [ 0.029636] thermal_sys: Registered thermal governor 'power_allocator' Jun 30 05:31:43.409730 [ 0.029833] No ATAGs? Jun 30 05:31:43.409754 [ 0.029900] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jun 30 05:31:43.421738 [ 0.029907] hw-breakpoint: maximum watchpoint size is 8 bytes. Jun 30 05:31:43.433763 [ 0.030994] Serial: AMBA PL011 UART driver Jun 30 05:31:43.433822 [ 0.080492] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 30 05:31:43.445774 [ 0.087378] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Jun 30 05:31:43.445843 [ 0.091776] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages Jun 30 05:31:43.457759 [ 0.091785] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page Jun 30 05:31:43.457825 [ 0.098631] iommu: Default domain type: Translated Jun 30 05:31:43.469754 [ 0.098640] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 05:31:43.469816 [ 0.099609] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Jun 30 05:31:43.481767 [ 0.100145] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 05:31:43.481826 [ 0.100156] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 05:31:43.493764 [ 0.100792] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 05:31:43.493835 [ 0.100821] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 05:31:43.505771 [ 0.101026] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 05:31:43.517751 [ 0.101383] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 05:31:43.517812 [ 0.101393] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 05:31:43.529750 [ 0.101772] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 05:31:43.529813 [ 0.102064] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 05:31:43.529861 [ 0.102074] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 05:31:43.541768 [ 0.102368] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 05:31:43.541828 [ 0.102487] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 05:31:43.553760 [ 0.102495] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 05:31:43.553821 [ 0.102677] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 05:31:43.565753 [ 0.102894] pps_core: LinuxPPS API ver. 1 registered Jun 30 05:31:43.565814 [ 0.102899] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 05:31:43.577752 [ 0.102915] PTP clock support registered Jun 30 05:31:43.577810 [ 0.104446] NetLabel: Initializing Jun 30 05:31:43.577855 [ 0.104452] NetLabel: domain hash size = 128 Jun 30 05:31:43.589786 [ 0.104457] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Jun 30 05:31:43.589849 [ 0.104511] NetLabel: unlabeled traffic allowed by default Jun 30 05:31:43.601759 [ 0.104683] vgaarb: loaded Jun 30 05:31:43.601815 [ 0.105192] clocksource: Switched to clocksource mct-frc Jun 30 05:31:43.601863 [ 0.105773] VFS: Disk quotas dquot_6.6.0 Jun 30 05:31:43.613761 [ 0.105860] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jun 30 05:31:43.613825 [ 0.106620] AppArmor: AppArmor Filesystem Enabled Jun 30 05:31:43.625756 [ 0.116553] NET: Registered PF_INET protocol family Jun 30 05:31:43.625816 [ 0.116754] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Jun 30 05:31:43.637769 [ 0.118229] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 05:31:43.637838 [ 0.118333] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 05:31:43.649773 [ 0.118359] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Jun 30 05:31:43.661764 [ 0.118458] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Jun 30 05:31:43.661852 [ 0.118689] TCP: Hash tables configured (established 8192 bind 8192) Jun 30 05:31:43.673760 [ 0.118929] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Jun 30 05:31:43.673798 [ 0.119023] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 05:31:43.685763 [ 0.119064] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 05:31:43.697763 [ 0.119279] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 05:31:43.697826 [ 0.119318] NET: Registered PF_XDP protocol family Jun 30 05:31:43.697873 [ 0.119330] PCI: CLS 0 bytes, default 64 Jun 30 05:31:43.709764 [ 0.119816] Trying to unpack rootfs image as initramfs... Jun 30 05:31:43.709825 [ 0.120174] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Jun 30 05:31:43.721765 [ 0.125586] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Jun 30 05:31:43.721833 [ 0.190196] Initialise system trusted keyrings Jun 30 05:31:43.733766 [ 0.190263] Key type blacklist registered Jun 30 05:31:43.733824 [ 0.191493] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Jun 30 05:31:43.745764 [ 0.199440] zbud: loaded Jun 30 05:31:43.745819 [ 0.201478] integrity: Platform Keyring initialized Jun 30 05:31:43.745866 [ 0.201519] integrity: Machine keyring initialized Jun 30 05:31:43.757762 [ 0.201530] Key type asymmetric registered Jun 30 05:31:43.757821 [ 0.201536] Asymmetric key parser 'x509' registered Jun 30 05:31:43.757868 [ 1.422418] Freeing initrd memory: 25120K Jun 30 05:31:43.769762 [ 1.444524] alg: self-tests for CTR-KDF (hmac(sha256)) passed Jun 30 05:31:43.769824 [ 1.444790] bounce: pool size: 64 pages Jun 30 05:31:43.781781 [ 1.444971] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Jun 30 05:31:43.781851 [ 1.445151] io scheduler mq-deadline registered Jun 30 05:31:43.793760 [ 1.450289] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Jun 30 05:31:43.793830 [ 1.471282] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 05:31:43.805773 [ 1.471294] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 05:31:43.817767 [ 1.473679] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 05:31:43.817835 [ 1.473689] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 05:31:43.829761 [ 1.474496] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 05:31:43.841764 [ 1.474504] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 05:31:43.841835 [ 1.475325] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 05:31:43.853775 [ 1.475334] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 05:31:43.865758 [ 1.477692] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 05:31:43.877769 [ 1.480470] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 05:31:43.877833 [ 1.483238] Serial: AMBA driver Jun 30 05:31:43.877876 [ 1.483458] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 05:31:43.889782 [ 1.483931] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 05:31:43.901765 [ 1.484411] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 05:31:43.913749 [ 2.565222] printk: console [ttySAC2] enabled Jun 30 05:31:43.913809 [ 2.570043] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Jun 30 05:31:43.925743 [ 2.580693] STM32 USART driver initialized Jun 30 05:31:43.925801 [ 2.595123] mousedev: PS/2 mouse device common for all mice Jun 30 05:31:43.937738 [ 2.626316] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 05:31:43.973764 [ 2.634941] s5m-rtc s5m-rtc: setting system clock to 2024-06-30T05:31:44 UTC (1719725504) Jun 30 05:31:43.985755 [ 2.644782] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Jun 30 05:31:43.997752 [ 2.652218] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 05:31:43.997815 [ 2.660212] NET: Registered PF_INET6 protocol family Jun 30 05:31:44.009715 [ 2.684225] Segment Routing with IPv6 Jun 30 05:31:44.033760 [ 2.686521] In-situ OAM (IOAM) with IPv6 Jun 30 05:31:44.033819 [ 2.690450] mip6: Mobile IPv6 Jun 30 05:31:44.033863 [ 2.693333] NET: Registered PF_PACKET protocol family Jun 30 05:31:44.045762 [ 2.698454] mpls_gso: MPLS GSO support Jun 30 05:31:44.045821 [ 2.702500] ThumbEE CPU extension supported. Jun 30 05:31:44.045867 [ 2.706322] Registering SWP/SWPB emulation handler Jun 30 05:31:44.057759 [ 2.711572] registered taskstats version 1 Jun 30 05:31:44.057817 [ 2.715220] Loading compiled-in X.509 certificates Jun 30 05:31:44.069689 [ 3.175722] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Jun 30 05:31:44.525765 [ 3.183081] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Jun 30 05:31:44.537782 [ 3.194184] zswap: loaded using pool lzo/zbud Jun 30 05:31:44.537841 [ 3.198057] Key type .fscrypt registered Jun 30 05:31:44.549734 [ 3.201373] Key type fscrypt-provisioning registered Jun 30 05:31:44.549795 [ 3.225475] Key type encrypted registered Jun 30 05:31:44.573766 [ 3.228019] AppArmor: AppArmor sha1 policy hashing enabled Jun 30 05:31:44.573828 [ 3.233556] ima: No TPM chip found, activating TPM-bypass! Jun 30 05:31:44.585757 [ 3.239006] ima: Allocated hash algorithm: sha256 Jun 30 05:31:44.585817 [ 3.243708] ima: No architecture policies found Jun 30 05:31:44.597771 [ 3.248252] evm: Initialising EVM extended attributes: Jun 30 05:31:44.597833 [ 3.253295] evm: security.selinux Jun 30 05:31:44.597878 [ 3.256567] evm: security.SMACK64 (disabled) Jun 30 05:31:44.609755 [ 3.260840] evm: security.SMACK64EXEC (disabled) Jun 30 05:31:44.609815 [ 3.265436] evm: security.SMACK64TRANSMUTE (disabled) Jun 30 05:31:44.609862 [ 3.270468] evm: security.SMACK64MMAP (disabled) Jun 30 05:31:44.621769 [ 3.275068] evm: security.apparmor Jun 30 05:31:44.621826 [ 3.278454] evm: security.ima Jun 30 05:31:44.621869 [ 3.281405] evm: security.capability Jun 30 05:31:44.633698 [ 3.284951] evm: HMAC attrs: 0x1 Jun 30 05:31:44.633756 [ 3.874659] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 05:31:45.221789 [ 3.880639] clk: Disabling unused clocks Jun 30 05:31:45.233707 [ 3.893575] Freeing unused kernel image (initmem) memory: 2048K Jun 30 05:31:45.245771 [ 3.898431] Checked W+X mappings: passed, no W+X pages found Jun 30 05:31:45.245833 [ 3.903692] Run /init as init process Jun 30 05:31:45.245877 Loading, please wait... Jun 30 05:31:45.281701 Starting systemd-udevd version 252.26-1~deb12u2 Jun 30 05:31:45.353722 [ 4.802941] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 05:31:46.157718 [ 4.842944] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 05:31:46.193664 [ 4.850435] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 05:31:46.205698 [ 4.868791] Synopsys Designware Multimedia Card Interface Driver Jun 30 05:31:46.217728 [ 4.902203] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 30 05:31:46.253717 [ 4.916010] usbcore: registered new interface driver usbfs Jun 30 05:31:46.265762 [ 4.916111] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 30 05:31:46.265827 [ 4.947700] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 30 05:31:46.301757 [ 4.952719] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 30 05:31:46.301851 [ 4.955565] usbcore: registered new interface driver hub Jun 30 05:31:46.301902 [ 4.972208] SCSI subsystem initialized Jun 30 05:31:46.313712 [ 4.978350] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 30 05:31:46.325759 [ 4.983383] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 30 05:31:46.337722 [ 4.996610] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 05:31:46.349697 [ 5.013745] usbcore: registered new device driver usb Jun 30 05:31:46.361719 [ 5.023892] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo Jun 30 05:31:46.373749 [ 5.057684] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo Jun 30 05:31:46.409730 [ 5.077958] mmc_host mmc0: card is polling. Jun 30 05:31:46.421719 [ 5.093303] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 05:31:46.445765 [ 5.103281] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 05:31:46.457720 [ 5.131652] phy phy-12130000.phy.2: phy_power_on was called before phy_init Jun 30 05:31:46.481715 [ 5.144909] phy phy-12130000.phy.2: phy_power_on was called before phy_init Jun 30 05:31:46.493758 [ 5.152619] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 05:31:46.505696 [ 5.166706] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 30 05:31:46.517758 [ 5.171233] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Jun 30 05:31:46.529754 [ 5.180507] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 30 05:31:46.529822 [ 5.183043] exynos-ohci 12120000.usb: USB Host Controller Jun 30 05:31:46.541744 [ 5.189880] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 30 05:31:46.541813 [ 5.209927] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 30 05:31:46.553746 [ 5.215582] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Jun 30 05:31:46.565814 [ 5.224418] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 30 05:31:46.577773 [ 5.235199] exynos-ehci 12110000.usb: irq 109, io mem 0x12110000 Jun 30 05:31:46.589750 [ 5.237853] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Jun 30 05:31:46.589819 [ 5.241954] scsi host0: ahci-dwc Jun 30 05:31:46.589865 [ 5.252013] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 110 Jun 30 05:31:46.601782 [ 5.259214] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 05:31:46.613756 [ 5.265423] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 05:31:46.613827 [ 5.272852] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 05:31:46.625771 [ 5.280044] usb usb1: Product: EHCI Host Controller Jun 30 05:31:46.625830 [ 5.284891] usb usb1: Manufacturer: Linux 6.1.0-22-armmp-lpae ehci_hcd Jun 30 05:31:46.637756 [ 5.291402] usb usb1: SerialNumber: 12110000.usb Jun 30 05:31:46.637815 [ 5.296292] exynos-ohci 12120000.usb: irq 109, io mem 0x12120000 Jun 30 05:31:46.649761 [ 5.299504] hub 1-0:1.0: USB hub found Jun 30 05:31:46.649819 [ 5.305769] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 30 05:31:46.661753 [ 5.316127] hub 1-0:1.0: 3 ports detected Jun 30 05:31:46.661811 [ 5.320960] mmc0: new DDR MMC card at address 0001 Jun 30 05:31:46.673743 [ 5.326179] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Jun 30 05:31:46.673803 [ 5.333334] mmcblk0: p1 p2 p3 p4 Jun 30 05:31:46.673847 [ 5.335274] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 05:31:46.685788 [ 5.347326] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Jun 30 05:31:46.697744 [ 5.351810] mmc1: new high speed SDHC card at address aaaa Jun 30 05:31:46.697823 [ 5.359891] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Jun 30 05:31:46.709750 [ 5.366442] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (241:0) Jun 30 05:31:46.709813 [ 5.370003] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Jun 30 05:31:46.721775 [ 5.372237] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Jun 30 05:31:46.733750 [ 5.379493] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 05:31:46.733819 [ 5.391084] usb usb2: Product: USB Host Controller Jun 30 05:31:46.745746 [ 5.395860] usb usb2: Manufacturer: Linux 6.1.0-22-armmp-lpae ohci_hcd Jun 30 05:31:46.745811 [ 5.402343] usb usb2: SerialNumber: 12120000.usb Jun 30 05:31:46.745861 [ 5.438599] hub 2-0:1.0: USB hub found Jun 30 05:31:46.781695 [ 5.441158] hub 2-0:1.0: 3 ports detected Jun 30 05:31:46.793701 [ 5.753128] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 05:31:47.105730 [ 5.769241] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 30 05:31:47.117766 [ 5.774803] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 30 05:31:47.129768 [ 5.780658] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 30 05:31:47.129832 [ 5.788114] ata1.00: configured for UDMA/133 Jun 30 05:31:47.129878 [ 5.791858] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 30 05:31:47.141757 [ 5.821260] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 05:31:47.177699 [ 5.864211] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 05:31:47.213754 [ 5.868276] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 05:31:47.225746 [ 5.876650] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Jun 30 05:31:47.225818 [ 5.885306] xhci-hcd xhci-hcd.2.auto: irq 111, io mem 0x12000000 Jun 30 05:31:47.237762 [ 5.891455] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 05:31:47.237823 [ 5.896739] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 05:31:47.249772 [ 5.904356] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 05:31:47.249834 [ 5.911015] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 05:31:47.261783 [ 5.919113] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 05:31:47.273760 [ 5.926313] usb usb3: Product: xHCI Host Controller Jun 30 05:31:47.273820 [ 5.931177] usb usb3: Manufacturer: Linux 6.1.0-22-armmp-lpae xhci-hcd Jun 30 05:31:47.285755 [ 5.937683] usb usb3: SerialNumber: xhci-hcd.2.auto Jun 30 05:31:47.285816 [ 5.943769] hub 3-0:1.0: USB hub found Jun 30 05:31:47.285861 [ 5.946328] hub 3-0:1.0: 1 port detected Jun 30 05:31:47.297750 [ 5.954075] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 05:31:47.309755 [ 5.960887] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Jun 30 05:31:47.309824 [ 5.961881] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 05:31:47.321764 [ 5.968974] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 05:31:47.333755 [ 5.985568] usb usb4: Product: xHCI Host Controller Jun 30 05:31:47.333814 [ 5.990410] usb usb4: Manufacturer: Linux 6.1.0-22-armmp-lpae xhci-hcd Jun 30 05:31:47.345759 [ 5.996922] usb usb4: SerialNumber: xhci-hcd.2.auto Jun 30 05:31:47.345819 [ 6.003312] hub 4-0:1.0: USB hub found Jun 30 05:31:47.345864 [ 6.005799] hub 4-0:1.0: 1 port detected Jun 30 05:31:47.357734 [ 6.014500] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 30 05:31:47.369761 [ 6.020551] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 30 05:31:47.369821 [ 6.025840] sd 0:0:0:0: [sda] Write Protect is off Jun 30 05:31:47.369868 [ 6.030648] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 30 05:31:47.381791 [ 6.043689] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 30 05:31:47.393717 [ 6.075918] sda: sda1 sda2 < sda5 > Jun 30 05:31:47.417713 [ 6.078429] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 05:31:47.429768 [ 6.089301] sd 0:0:0:0: [sda] Attached SCSI disk Jun 30 05:31:47.441692 [ 6.187531] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 05:31:47.537791 [ 6.295599] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 05:31:47.645762 [ 6.621222] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 05:31:47.969774 [ 6.694431] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 05:31:48.041768 [ 6.808555] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 05:31:48.161733 [ 6.916160] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 05:31:48.269726 [ 7.023774] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 05:31:48.377721 [ 7.044127] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 05:31:48.389743 [ 7.121216] random: crng init done Jun 30 05:31:48.461716 [ 7.230610] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. Jun 30 05:31:48.581796 [ 7.241544] device-mapper: uevent: version 1.0.3 Jun 30 05:31:48.593787 [ 7.246163] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Jun 30 05:31:48.593858 Begin: Loading essential drivers ... done. Jun 30 05:31:49.241700 Begin: Running /scripts/init-premount ... done. Jun 30 05:31:52.253783 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 30 05:31:52.253856 Begin: Running /scripts/local-premount ... done. Jun 30 05:31:52.325690 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 30 05:31:52.385712 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 30 05:31:52.481750 /dev/mapper/arndale--metrocentre--vg-root: clean, 39331/1220608 files, 377987/4882432 blocks Jun 30 05:31:52.745700 done. Jun 30 05:31:52.757692 [ 11.551152] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 30 05:31:52.901878 [ 11.783991] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. Jun 30 05:31:53.141701 done. Jun 30 05:31:53.141753 Begin: Running /scripts/local-bottom ... done. Jun 30 05:31:53.189738 Begin: Running /scripts/init-bottom ... done. Jun 30 05:31:53.237685 [ 12.113050] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. Jun 30 05:31:53.465734 INIT: version 3.06 booting Jun 30 05:31:53.813680 INIT: No inittab.d directory found Jun 30 05:31:53.897680 Using makefile-style concurrent boot in runlevel S. Jun 30 05:31:54.233722 Starting hotplug events dispatcher: systemd-udevd. Jun 30 05:31:55.901721 Synthesizing the initial hotplug events (subsystems)...done. Jun 30 05:31:56.153704 Synthesizing the initial hotplug events (devices)...done. Jun 30 05:31:56.705722 Waiting for /dev to be fully populated...[ 15.574896] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 05:31:56.921745 [ 15.648765] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 30 05:31:57.005641 [ 15.725179] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jun 30 05:31:57.077648 [ 15.779322] panfrost 11800000.gpu: clock rate = 533000000 Jun 30 05:31:57.125669 [ 15.850125] panfrost 11800000.gpu: mali-t600 id 0x600 major 0x0 minor 0x0 status 0x1 Jun 30 05:31:57.197677 [ 15.856507] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,31b4dfff Jun 30 05:31:57.209725 [ 15.864710] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 Jun 30 05:31:57.221701 [ 15.876351] panfrost 11800000.gpu: shader_present=0xf l2_present=0x1 Jun 30 05:31:57.233730 [ 15.890562] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 0 Jun 30 05:31:57.245649 [ 15.957231] usb3503 usb-hub: switched to HUB mode Jun 30 05:31:57.305679 [ 15.960461] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 05:31:57.317624 [ 16.021240] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 05:31:57.377651 [ 16.092022] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 05:31:57.449593 [ 16.200687] I/O error, dev mmcblk1, sector 7744000 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 2 Jun 30 05:31:57.557653 [ 16.281269] usb 1-3: new high-speed USB device number 2 using exynos-ehci Jun 30 05:31:57.629692 [ 16.308884] I/O error, dev mmcblk1, sector 7744001 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 2 Jun 30 05:31:57.665649 [ 16.421729] I/O error, dev mmcblk1, sector 7744002 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 2 Jun 30 05:31:57.773761 [ 16.454163] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Jun 30 05:31:57.809642 [ 16.460988] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jun 30 05:31:57.809677 [ 16.470032] hub 1-3:1.0: USB hub found Jun 30 05:31:57.821665 [ 16.472418] hub 1-3:1.0: 3 ports detected Jun 30 05:31:57.821697 [ 16.532241] I/O error, dev mmcblk1, sector 7744003 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 2 Jun 30 05:31:57.881697 [ 16.620003] OF: graph: no port node found in /soc/hdmi@14530000 Jun 30 05:31:57.965852 [ 16.640406] I/O error, dev mmcblk1, sector 7744004 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 2 Jun 30 05:31:57.989677 [ 16.748575] I/O error, dev mmcblk1, sector 7744005 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 2 Jun 30 05:31:58.097691 [ 16.765545] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Jun 30 05:31:58.121650 [ 16.856839] I/O error, dev mmcblk1, sector 7744006 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 2 Jun 30 05:31:58.217612 [ 16.884624] usb 1-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=77.32 Jun 30 05:31:58.241720 [ 16.891847] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Jun 30 05:31:58.241757 [ 16.899137] usb 1-3.2: Product: USB2.0 Hub Jun 30 05:31:58.253666 [ 16.907855] hub 1-3.2:1.0: USB hub found Jun 30 05:31:58.253698 [ 16.913628] hub 1-3.2:1.0: 4 ports detected Jun 30 05:31:58.265631 [ 16.965159] I/O error, dev mmcblk1, sector 7744007 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 2 Jun 30 05:31:58.325619 [ 17.073455] I/O error, dev mmcblk1, sector 7744008 op 0x0:(READ) flags 0x80700 phys_seg 13 prio class 2 Jun 30 05:31:58.433616 [ 17.181785] I/O error, dev mmcblk1, sector 7744009 op 0x0:(READ) flags 0x80700 phys_seg 13 prio class 2 Jun 30 05:31:58.541639 [ 17.213333] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 30 05:31:58.565660 [ 17.331419] usb 1-3.2.4: New USB device found, idVendor=0b95, idProduct=772a, bcdDevice= 0.01 Jun 30 05:31:58.685707 [ 17.338614] usb 1-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 30 05:31:58.697684 [ 17.346157] usb 1-3.2.4: Product: AX88772 Jun 30 05:31:58.697716 [ 17.350137] usb 1-3.2.4: Manufacturer: ASIX Elec. Corp. Jun 30 05:31:58.697742 [ 17.355346] usb 1-3.2.4: SerialNumber: 000001 Jun 30 05:31:58.709597 [ 17.986955] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 30 05:31:59.345604 [ 18.679973] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 05:32:00.041699 [ 18.695654] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Jun 30 05:32:00.053682 [ 18.707840] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, f2:e6:84:ff:97:c1 Jun 30 05:32:00.065624 [ 18.723808] usbcore: registered new interface driver asix Jun 30 05:32:00.077631 [ 20.013383] Buffer I/O error on dev mmcblk1, logical block 968000, async page read Jun 30 05:32:01.361723 done. Jun 30 05:32:01.385618 [ 20.487251] EXT4-fs (dm-0): re-mounted. Quota mode: none. Jun 30 05:32:01.833672 Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). Jun 30 05:32:01.869646 Checking file systems.../dev/sda1: clean, 922/61056 files, 25375/243968 blocks Jun 30 05:32:03.669648 done. Jun 30 05:32:03.705623 Cleaning up temporary files... /tmp. Jun 30 05:32:03.945656 [ 22.799552] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 30 05:32:04.149647 [ 22.851745] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Jun 30 05:32:04.209693 [ 23.108328] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k FS Jun 30 05:32:04.461684 Mounting local filesystems...done. Jun 30 05:32:04.833654 Activating swapfile swap, if any...done. Jun 30 05:32:04.833716 Cleaning up temporary files.... Jun 30 05:32:04.857638 Starting Setting kernel variables: sysctl. Jun 30 05:32:05.133633 [ 24.365563] audit: type=1400 audit(1719725525.316:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=889 comm="apparmor_parser" Jun 30 05:32:05.721731 [ 24.409105] audit: type=1400 audit(1719725525.356:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=890 comm="apparmor_parser" Jun 30 05:32:05.769696 [ 24.423577] audit: type=1400 audit(1719725525.356:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=890 comm="apparmor_parser" Jun 30 05:32:05.781696 [ 24.605522] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Jun 30 05:32:05.961635 [ 24.761425] audit: type=1400 audit(1719725525.712:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=939 comm="apparmor_parser" Jun 30 05:32:06.117709 [ 24.777255] audit: type=1400 audit(1719725525.712:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=939 comm="apparmor_parser" Jun 30 05:32:06.141691 [ 24.790705] audit: type=1400 audit(1719725525.712:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=939 comm="apparmor_parser" Jun 30 05:32:06.153653 [ 25.085868] audit: type=1400 audit(1719725526.036:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=929 comm="apparmor_parser" Jun 30 05:32:06.453681 [ 25.105289] audit: type=1400 audit(1719725526.040:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=929 comm="apparmor_parser" Jun 30 05:32:06.465674 [ 25.121147] audit: type=1400 audit(1719725526.040:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=929 comm="apparmor_parser" Jun 30 05:32:06.489688 [ 25.138674] audit: type=1400 audit(1719725526.048:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=929 comm="apparmor_parser" Jun 30 05:32:06.501694 Starting: AppArmorLoading AppArmor profiles...done. Jun 30 05:32:06.501726 . Jun 30 05:32:06.501747 [ 26.758802] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 30 05:32:08.109995 [ 26.764875] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jun 30 05:32:08.172945 Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1 Jun 30 05:32:09.801751 Copyright 2004-2022 Internet Systems Consortium. Jun 30 05:32:09.813691 All rights reserved. Jun 30 05:32:09.813721 For info, please visit https://www.isc.org/software/dhcp/ Jun 30 05:32:09.813748 Jun 30 05:32:09.813786 Listening on LPF/eth0/9e:04:00:59:64:5a Jun 30 05:32:09.813830 Sending on LPF/eth0/9e:04:00:59:64:5a Jun 30 05:32:09.825697 Sending on Socket/fallback Jun 30 05:32:09.825797 Created duid "\000\001\000\001.\023\252U\236\004\000YdZ". Jun 30 05:32:09.825824 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 Jun 30 05:32:09.837651 [ 28.896578] exynos4-fb 14400000.fimd: deferred probe timeout, ignoring dependency Jun 30 05:32:10.245711 [ 28.907485] exynos-mixer 14450000.mixer: deferred probe timeout, ignoring dependency Jun 30 05:32:10.257719 [ 28.915229] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations Jun 30 05:32:10.269693 [ 28.921618] exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm]) Jun 30 05:32:10.281683 [ 28.930302] exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm]) Jun 30 05:32:10.281751 [ 28.939662] exynos-drm exynos-drm: bound 14500000.dsi (ops hdmi_enable [exynosdrm]) Jun 30 05:32:10.293698 [ 28.946341] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm]) Jun 30 05:32:10.305687 [ 28.954560] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Jun 30 05:32:10.305722 [ 28.960852] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Jun 30 05:32:10.317672 [ 28.967307] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 Jun 30 05:32:10.317708 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 Jun 30 05:32:13.620497 DHCPOFFER of 10.149.64.44 from 10.149.64.4 Jun 30 05:32:13.620497 DHCPREQUEST for 10.149.64.44 on eth0 to 255.255.255.255 port 67 Jun 30 05:32:13.620497 DHCPACK of 10.149.64.44 from 10.149.64.4 Jun 30 05:32:13.632466 bound to 10.149.64.44 -- renewal in 251 seconds. Jun 30 05:32:13.632466 done. Jun 30 05:32:13.632466 Cleaning up temporary files.... Jun 30 05:32:13.680432 Starting nftables: none Jun 30 05:32:13.776442 . Jun 30 05:32:14.220423 INIT: Entering runlevel: 2 Jun 30 05:32:14.280426 Using makefile-style concurrent boot in runlevel 2. Jun 30 05:32:14.328450 Starting Apache httpd web server: apache2. Jun 30 05:32:16.380521 Starting periodic command scheduler: cron. Jun 30 05:32:16.828456 Starting NTP server: ntpd2024-06-30T05:32:16 ntpd[1133]: INIT: ntpd ntpsec-1.2.2: Starting Jun 30 05:32:16.876699 2024-06-30T05:32:16 ntpd[1133]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 30 05:32:16.885684 . Jun 30 05:32:16.885712 Starting system message bus: dbus. Jun 30 05:32:17.125661 Starting OpenBSD Secure Shell server: sshd. Jun 30 05:32:17.989683 Jun 30 05:32:19.033672 Debian GNU/Linux 12 arndale-metrocentre ttySAC2 Jun 30 05:32:19.033717 Jun 30 05:32:19.033739 arndale-metrocentre login: INIT: Switching to r INIT: No inittab.d directorUsing makefile-style concurrent boot in runlevel 6. Jun 30 05:37:25.981859 Stopping SMP IRQ Balancer: irqbalance. Jun 30 05:37:26.053931 Stopping nftables: none. Jun 30 05:37:26.053988 Stopping hotplug events dispatcher: systemd-udevd. Jun 30 05:37:26.065917 Saving the system clock to /dev/rtc0. Jun 30 05:37:26.557952 Hardware Clock updated to Sun Jun 30 05:37:26 UTC 2024. Jun 30 05:37:26.558015 Stopping Apache httpd web server: apache2. Jun 30 05:37:27.205922 Asking all remaining processes to terminate...done. Jun 30 05:37:27.577934 All processes ended within 1 seconds...done. Jun 30 05:37:27.577994 Deconfiguring network interfaces...ifdown: ignoring unknown interface eth0=eth0 Jun 30 05:37:27.673958 done. Jun 30 05:37:27.674011 [ 346.542933] EXT4-fs (sda1): unmounting filesystem. Jun 30 05:37:27.889889 Deactivating swap...done. Jun 30 05:37:27.949923 Unmounting local filesystems...done. Jun 30 05:37:27.961898 [ 346.859327] EXT4-fs (dm-0): re-mounted. Quota mode: none. Jun 30 05:37:28.201963 Will now restart. Jun 30 05:37:28.561838 [ 347.242788] asix 1-3.2.4:1.0 eth0: Link is Down Jun 30 05:37:28.585831 [ 347.310276] sd 0:0:0:0: [sda] Synchronizing SCSI cache Jun 30 05:37:28.657812 [ 347.318008] wake enabled for irq 101 (gpx1-4) Jun 30 05:37:28.669819 [ 347.320894] wake enabled for irq 102 (gpx1-5) Jun 30 05:37:28.669879 [ 347.325255] wake enabled for irq 103 (gpx1-6) Jun 30 05:37:28.669925 [ 347.329589] wake enabled for irq 104 (gpx1-7) Jun 30 05:37:28.681825 [ 347.333928] wake enabled for irq 105 (gpx2-0) Jun 30 05:37:28.681885 [ 347.338275] wake enabled for irq 106 (gpx2-1) Jun 30 05:37:28.681932 [ 347.343088] reboot: Reó Jun 30 05:37:29.017752 Jun 30 05:37:29.017776 Jun 30 05:37:29.017839 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 05:37:29.029840 Jun 30 05:37:29.029891 CPU: Exynos5250@1000MHz Jun 30 05:37:29.029935 Jun 30 05:37:29.029980 Board: Arndale Jun 30 05:37:29.030020 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 05:37:29.041781 ready Jun 30 05:37:29.041833 DRAM: 2 GiB Jun 30 05:37:29.041874 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 05:37:29.053805 trace: enabled Jun 30 05:37:29.089756 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 05:37:29.449795 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 05:37:29.509795 In: serial Jun 30 05:37:29.509863 Out: serial Jun 30 05:37:29.521799 Err: serial Jun 30 05:37:29.521853 SCSI: ARNDALE SCSI INIT Jun 30 05:37:29.521895 Target spinup took 0 ms. Jun 30 05:37:29.521936 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 05:37:29.533746 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 05:37:29.533780 Net: Net Initialization Skipped Jun 30 05:37:29.533804 No ethernet found. Jun 30 05:37:29.545787 Hostname: arndale-metrocentre Jun 30 05:37:29.545843 Hit any key to stop autoboot: 2  1  0 Jun 30 05:37:31.465784 (Re)start USB... Jun 30 05:37:31.465850 USB0: USB EHCI 1.00 Jun 30 05:37:31.477760 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 05:37:37.069838 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 05:37:37.081692 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 05:37:37.525778 Waiting for Ethernet connection... done. Jun 30 05:37:39.217681 BOOTP broadcast 1 Jun 30 05:37:39.217740 BOOTP broadcast 2 Jun 30 05:37:41.545695 DHCP client bound to address 10.149.64.44 (2432 ms) Jun 30 05:37:41.557742 Using asx0 device Jun 30 05:37:41.557796 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 05:37:41.557845 Filename 'pxelinux.0'. Jun 30 05:37:41.569693 Load address: 0x43e00000 Jun 30 05:37:41.569749 Loading: *### Jun 30 05:37:41.581583 2.4 MiB/s Jun 30 05:37:41.581636 done Jun 30 05:37:41.581694 Bytes transferred = 42430 (a5be hex) Jun 30 05:37:41.581751 missing environment variable: pxeuuid Jun 30 05:37:41.593754 Retrieving file: pxelinux.cfg/0A95402C Jun 30 05:37:41.593813 Using asx0 device Jun 30 05:37:41.593854 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 05:37:41.605744 Filename 'pxelinux.cfg/0A95402C'. Jun 30 05:37:41.605802 Load address: 0x51000000 Jun 30 05:37:41.605844 Loading: *# Jun 30 05:37:41.605883 31.3 KiB/s Jun 30 05:37:41.605922 done Jun 30 05:37:41.605959 Bytes transferred = 65 (41 hex) Jun 30 05:37:41.617726 Config file found Jun 30 05:37:41.617781 Ignoring unknown command: serial Jun 30 05:37:41.617825 1: local Jun 30 05:37:41.617865 scanning bus for devices... Jun 30 05:37:41.617906 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 05:37:41.641726 Type: Hard Disk Jun 30 05:37:41.653740 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 05:37:41.653802 Found 1 device(s). Jun 30 05:37:41.653844 Jun 30 05:37:41.653881 SCSI device 0: Jun 30 05:37:41.653921 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 05:37:41.665779 Type: Hard Disk Jun 30 05:37:41.665836 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 05:37:41.665885 ... is now current device Jun 30 05:37:41.677686 Scanning scsi 0... Jun 30 05:37:41.677740 Found U-Boot script /boot.scr Jun 30 05:37:41.857640 1779 bytes read in 44 ms (39.1 KiB/s) Jun 30 05:37:41.905708 ## Executing script at 50000000 Jun 30 05:37:41.905765 Loading dtbs/6.10.0-rc5+/exynos5250-arndale.dtb Jun 30 05:37:41.905812 46641 bytes read in 2390 ms (18.6 KiB/s) Jun 30 05:37:44.221752 983052 bytes read in 106 ms (8.8 MiB/s) Jun 30 05:37:44.353788 Loaded xen-4.19-unstable to 0x41000000 (f000c) Jun 30 05:37:44.353868 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan sched=rtds Jun 30 05:37:44.365774 10785280 bytes read in 508 ms (20.2 MiB/s) Jun 30 05:37:44.869748 Loaded vmlinuz-6.10.0-rc5+ to 0x42000000 (a49200) Jun 30 05:37:44.881705 command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 05:37:44.893739 12142267 bytes read in 520 ms (22.3 MiB/s) Jun 30 05:37:45.421742 Loaded initrd.img-6.10.0-rc5+ to 0x43300000 (b946bb) Jun 30 05:37:45.421804 chosen { Jun 30 05:37:45.433737 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan sched=rtds"; Jun 30 05:37:45.445749 #size-cells = <0x00000001>; Jun 30 05:37:45.445804 #address-cells = <0x00000001>; Jun 30 05:37:45.445848 stdout-path = "serial2:115200n8"; Jun 30 05:37:45.445892 module@1 { Jun 30 05:37:45.445931 reg = <0x43300000 0x00b946bb>; Jun 30 05:37:45.457773 compatible = "xen,linux-initrd", "xen,multiboot-module"; Jun 30 05:37:45.457834 }; Jun 30 05:37:45.457873 module@0 { Jun 30 05:37:45.457912 bootargs = "ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Jun 30 05:37:45.481749 reg = <0x42000000 0x00a49200>; Jun 30 05:37:45.481806 compatible = "xen,linux-zimage", "xen,multiboot-module"; Jun 30 05:37:45.481854 }; Jun 30 05:37:45.481892 }; Jun 30 05:37:45.481929 Booting 0x41000000 - 0x43000000 Jun 30 05:37:45.493752 Kernel image @ 0x41000000 [ 0x000000 - 0x12f000 ] Jun 30 05:37:45.493812 ## Flattened Device Tree blob at 43000000 Jun 30 05:37:45.493857 Booting using the fdt blob at 0x43000000 Jun 30 05:37:45.505734 reserving fdt memory region: addr=43000000 size=c000 Jun 30 05:37:45.505795 Loading Device Tree to 4fff1000, end 4fffffff ... OK Jun 30 05:37:45.505842 Jun 30 05:37:45.517699 Starting kernel ...(fake run for tracing) Jun 30 05:37:45.517759 Jun 30 05:37:45.517797 Jun 30 05:37:45.517834 Starting kernel ... Jun 30 05:37:45.517873 Jun 30 05:37:45.517910 __ __ _ _ _ ___ _ _ _ Jun 30 05:37:45.577731 \ \/ /___ _ __ | || | / |/ _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Jun 30 05:37:45.577793 \ // _ \ '_ \ | || |_ | | (_) |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Jun 30 05:37:45.589754 / \ __/ | | | |__ _|| |\__, |__| |_| | | | \__ \ || (_| | |_) | | __/ Jun 30 05:37:45.589816 /_/\_\___|_| |_| |_|(_)_| /_/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Jun 30 05:37:45.601744 Jun 30 05:37:45.601795 (XEN) Xen version 4.19-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Sun Jun 30 01:52:15 UTC 2024 Jun 30 05:37:45.613753 (XEN) Latest ChangeSet: Wed Jun 26 16:07:30 2024 +0100 git:08f9b1dd9c Jun 30 05:37:45.613816 (XEN) build-id: a1f1bc3a5986d3ec30239a56d95725b8f32801f2 Jun 30 05:37:45.625759 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Jun 30 05:37:45.625823 (XEN) 32-bit Execution: Jun 30 05:37:45.625866 (XEN) Processor Features: 00001031:00011011 Jun 30 05:37:45.637717 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Jun 30 05:37:45.637717 (XEN) Extensions: GenericTimer Security Jun 30 05:37:45.649780 (XEN) Debug Features: 02010555 Jun 30 05:37:45.649841 (XEN) Auxiliary Features: 00000000 Jun 30 05:37:45.649886 (XEN) Memory Model Features: 10201105 20000000 Jun 30 05:37:45.649930 (XEN) 01240000 02102211 Jun 30 05:37:45.661749 (XEN) ISA Features: 02101110 13112111 21232041 Jun 30 05:37:45.661808 (XEN) 11112131 10011142 00000000 Jun 30 05:37:45.673752 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Jun 30 05:37:45.673825 (XEN) Set SYSRAM to 0000000041000074 (00200074) Jun 30 05:37:45.685745 (XEN) SMP: Allowing 2 CPUs Jun 30 05:37:45.685801 (XEN) enabled workaround for: ARM erratum 766422 Jun 30 05:37:45.685848 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Jun 30 05:37:45.697753 (XEN) GICv2 initialization: Jun 30 05:37:45.697808 (XEN) gic_dist_addr=0000000010481000 Jun 30 05:37:45.697853 (XEN) gic_cpu_addr=0000000010482000 Jun 30 05:37:45.709739 (XEN) gic_hyp_addr=0000000010484000 Jun 30 05:37:45.709797 (XEN) gic_vcpu_addr=0000000010486000 Jun 30 05:37:45.709842 (XEN) gic_maintenance_irq=25 Jun 30 05:37:45.721736 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Jun 30 05:37:45.721797 (XEN) Using scheduler: SMP RTDS Scheduler (rtds) Jun 30 05:37:45.721844 (XEN) Initializing RTDS scheduler Jun 30 05:37:45.733756 (XEN) WARNING: This is experimental software in development. Jun 30 05:37:45.733817 (XEN) Use at your own risk. Jun 30 05:37:45.733860 (XEN) Allocated console ring of 16 KiB. Jun 30 05:37:45.745755 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Jun 30 05:37:45.745818 (XEN) CPU0: Guest atomics will try 1 times before pausing the domain Jun 30 05:37:45.757738 (XEN) Bringing up CPU1 Jun 30 05:37:45.757792 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Jun 30 05:37:45.757841 (XEN) Brought up 2 CPUs Jun 30 05:37:45.769824 (XEN) CPU 1 booted. Jun 30 05:37:45.769879 (XEN) I/O virtualisation disabled Jun 30 05:37:45.769923 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Jun 30 05:37:45.769969 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Jun 30 05:37:45.781753 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Jun 30 05:37:45.781815 (XEN) Initializing RTDS scheduler Jun 30 05:37:45.781858 (XEN) WARNING: This is experimental software in development. Jun 30 05:37:45.793756 (XEN) Use at your own risk. Jun 30 05:37:45.793812 (XEN) common/sched/rt.c:745: RTDS: timer initialized on cpu 0 Jun 30 05:37:45.805734 (XEN) alternatives: Patching with alt table 002c2f84 -> 002c305c Jun 30 05:37:45.805796 (XEN) CPU0 will execute ICIALLU on guest exit Jun 30 05:37:45.805843 (XEN) CPU1 will execute ICIALLU on guest exit Jun 30 05:37:45.817783 (XEN) *** LOADING DOMAIN 0 *** Jun 30 05:37:45.817839 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Jun 30 05:37:45.817888 (XEN) Loading ramdisk from boot module @ 0000000043300000 Jun 30 05:37:45.829740 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Jun 30 05:37:45.829800 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Jun 30 05:37:46.417742 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Jun 30 05:37:46.429680 (XEN) Allocating PPI 16 for event channel interrupt Jun 30 05:37:46.453755 (XEN) d0: extended regions not supported for 32-bit guests Jun 30 05:37:46.453815 (XEN) Loading zImage from 0000000042000000 to 0000000067400000-0000000067e49200 Jun 30 05:37:46.465714 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d946bb Jun 30 05:37:46.561753 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b499 Jun 30 05:37:46.657748 (XEN) Initial low memory virq threshold set at 0x4000 pages. Jun 30 05:37:46.669763 (XEN) Scrubbing Free RAM in background Jun 30 05:37:46.669851 (XEN) Std. Loglevel: All Jun 30 05:37:46.669897 (XEN) Guest Loglevel: All Jun 30 05:37:46.669938 (XEN) *************************************************** Jun 30 05:37:46.681736 (XEN) WARNING: SILO mode is not enabled. Jun 30 05:37:46.681796 (XEN) It has implications on the security of the system, Jun 30 05:37:46.681843 (XEN) unless the communications have been forbidden between Jun 30 05:37:46.693764 (XEN) untrusted domains. Jun 30 05:37:46.693819 (XEN) *************************************************** Jun 30 05:37:46.705675 (XEN) 3... 2... 1... Jun 30 05:37:49.705777 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 30 05:37:49.710881 (XEN) Freed 352kB init memory. Jun 30 05:37:49.710943 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 05:37:50.849690 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Jun 30 05:37:50.861748 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Jun 30 05:37:50.873722 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Jun 30 05:37:50.873783 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Jun 30 05:37:50.885737 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 05:37:50.885799 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 05:37:50.933748 [ 0.000000] Linux version 6.10.0-rc5+ (osstest@himrod0) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Sun Jun 30 01:19:39 UTC 2024 Jun 30 05:37:50.945766 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 30 05:37:50.957742 [ 0.000000] CPU: div instructions available: patching division code Jun 30 05:37:50.957807 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 05:37:50.969738 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 05:37:50.969807 [ 0.000000] Memory policy: Data cache writealloc Jun 30 05:37:50.981742 [ 0.000000] Xen 4.19 support found Jun 30 05:37:50.981799 [ 0.000000] efi: UEFI not found. Jun 30 05:37:50.981843 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 on node -1 Jun 30 05:37:50.993747 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 05:37:50.993805 [ 0.000000] Zone ranges: Jun 30 05:37:50.993848 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Jun 30 05:37:51.005782 [ 0.000000] Normal empty Jun 30 05:37:51.005838 [ 0.000000] HighMem empty Jun 30 05:37:51.005882 [ 0.000000] Movable zone start for each node Jun 30 05:37:51.017743 [ 0.000000] Early memory node ranges Jun 30 05:37:51.017800 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Jun 30 05:37:51.017849 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Jun 30 05:37:51.029747 [ 0.000000] psci: probing for conduit method from DT. Jun 30 05:37:51.029807 [ 0.000000] psci: PSCIv1.1 detected in firmware. Jun 30 05:37:51.041760 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Jun 30 05:37:51.041821 [ 0.000000] psci: Trusted OS migration not required Jun 30 05:37:51.053746 [ 0.000000] psci: SMC Calling Convention v1.2 Jun 30 05:37:51.053805 [ 0.000000] percpu: Embedded 18 pages/cpu s41428 r8192 d24108 u73728 Jun 30 05:37:51.065764 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 05:37:51.077764 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 05:37:51.089763 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Jun 30 05:37:51.089830 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 131072 Jun 30 05:37:51.101758 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Jun 30 05:37:51.113793 [ 0.000000] Memory: 414600K/524288K available (15360K kernel code, 2268K rwdata, 6084K rodata, 2048K init, 439K bss, 44152K reserved, 65536K cma-reserved, 0K highmem) Jun 30 05:37:51.125762 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 05:37:51.125825 [ 0.000000] trace event string verifier disabled Jun 30 05:37:51.137643 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 05:37:51.137643 [ 0.000000] rcu: RCU event tracing is enabled. Jun 30 05:37:51.149750 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Jun 30 05:37:51.149820 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Jun 30 05:37:51.161750 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 05:37:51.161813 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 05:37:51.173772 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 05:37:51.173835 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 05:37:51.185782 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Jun 30 05:37:51.185845 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 05:37:51.197772 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 05:37:51.209762 [ 0.000013] Switching to timer-based delay loop, resolution 41ns Jun 30 05:37:51.209824 [ 0.000520] Console: colour dummy device 80x30 Jun 30 05:37:51.221766 [ 0.000538] printk: legacy console [hvc0] enabled Jun 30 05:37:51.221826 [ 0.299532] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Jun 30 05:37:51.233757 [ 0.309931] CPU: Testing write buffer coherency: ok Jun 30 05:37:51.245683 [ 0.314873] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 05:37:51.245683 [ 0.324426] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 05:37:51.257771 [ 0.330839] pid_max: default: 32768 minimum: 301 Jun 30 05:37:51.257835 [ 0.335624] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 05:37:51.269789 [ 0.342906] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 05:37:51.269856 [ 0.351327] /cpus/cpu@0 missing clock-frequency property Jun 30 05:37:51.281787 [ 0.356127] /cpus/cpu@1 missing clock-frequency property Jun 30 05:37:51.281848 [ 0.361502] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 05:37:51.293753 [ 0.368227] xen:grant_table: Grant tables using version 1 layout Jun 30 05:37:51.293815 [ 0.373371] Grant table initialized Jun 30 05:37:51.305752 [ 0.376931] xen:events: Using FIFO-based ABI Jun 30 05:37:51.305811 [ 0.381212] Xen: initializing cpu0 Jun 30 05:37:51.305855 [ 0.384736] Setting up static identity map for 0x60300000 - 0x603000ac Jun 30 05:37:51.317743 [ 0.392507] rcu: Hierarchical SRCU implementation. Jun 30 05:37:51.317803 [ 0.396130] rcu: Max phase no-delay instances is 1000. Jun 30 05:37:51.329717 [ 0.404375] EFI services will not be available. Jun 30 05:37:51.329777 [ 0.407697] smp: Bringing up secondary CPUs ... Jun 30 05:37:51.341683 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 05:37:51.413749 [ 0.483054] Xen: initializing cpu1 Jun 30 05:37:51.413808 [ 0.483221] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 05:37:51.413857 [ 0.483245] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 05:37:51.425780 [ 0.502201] smp: Brought up 1 node, 2 CPUs Jun 30 05:37:51.425839 [ 0.505845] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 05:37:51.437750 [ 0.512133] CPU: All CPU(s) started in SVC mode. Jun 30 05:37:51.437810 [ 0.518062] devtmpfs: initialized Jun 30 05:37:51.449715 [ 0.530608] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 05:37:51.461758 [ 0.537178] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Jun 30 05:37:51.473750 [ 0.546830] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 05:37:51.473813 [ 0.554732] pinctrl core: initialized pinctrl subsystem Jun 30 05:37:51.485774 [ 0.561353] DMI not present or invalid. Jun 30 05:37:51.485832 [ 0.564817] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 05:37:51.497750 [ 0.571471] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 05:37:51.497750 [ 0.580805] thermal_sys: Registered thermal governor 'step_wise' Jun 30 05:37:51.509775 [ 0.580962] software IO TLB: area num 2. Jun 30 05:37:51.509839 [ 0.589635] software IO TLB: only able to allocate 8 MB Jun 30 05:37:51.521745 [ 0.596718] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Jun 30 05:37:51.521808 [ 0.601917] No ATAGs? Jun 30 05:37:51.533729 [ 0.604221] hw-breakpoint: Failed to enable monitor mode on CPU 0. Jun 30 05:37:51.533793 [ 0.612937] Serial: AMBA PL011 UART driver Jun 30 05:37:51.545674 [ 0.659626] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 65 Jun 30 05:37:51.585746 [ 0.688051] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 30 05:37:51.617763 [ 0.712080] xen:balloon: Initialising balloon driver Jun 30 05:37:51.641746 [ 0.718557] iommu: Default domain type: Translated Jun 30 05:37:51.641806 [ 0.721969] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 05:37:51.653752 [ 0.730708] SCSI subsystem initialized Jun 30 05:37:51.653810 [ 0.733447] usbcore: registered new interface driver usbfs Jun 30 05:37:51.665754 [ 0.738704] usbcore: registered new interface driver hub Jun 30 05:37:51.665815 [ 0.744044] usbcore: registered new device driver usb Jun 30 05:37:51.677757 [ 0.750735] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 05:37:51.677818 [ 0.754324] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 05:37:51.689774 [ 0.760576] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 05:37:51.689835 [ 0.765667] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 05:37:51.689883 [ 0.770574] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 05:37:51.701791 [ 0.776614] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 05:37:51.701851 [ 0.782394] pps_core: LinuxPPS API ver. 1 registered Jun 30 05:37:51.713757 [ 0.786783] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 05:37:51.725720 [ 0.796009] PTP clock support registered Jun 30 05:37:51.725775 [ 0.800223] EDAC MC: Ver: 3.0.0 Jun 30 05:37:51.725820 [ 0.803502] scmi_core: SCMI protocol bus registered Jun 30 05:37:51.737711 [ 0.810145] vgaarb: loaded Jun 30 05:37:51.737761 [ 0.814180] clocksource: Switched to clocksource arch_sys_counter Jun 30 05:37:51.749657 [ 0.830258] NET: Registered PF_INET protocol family Jun 30 05:37:51.761727 [ 0.833895] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Jun 30 05:37:51.761789 [ 0.841802] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 05:37:51.773726 [ 0.849497] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 05:37:51.785721 [ 0.857314] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Jun 30 05:37:51.785781 [ 0.865133] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Jun 30 05:37:51.797742 [ 0.872408] TCP: Hash tables configured (established 4096 bind 4096) Jun 30 05:37:51.797798 [ 0.878784] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 05:37:51.809749 [ 0.885352] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 05:37:51.821758 [ 0.892463] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 05:37:51.821845 [ 0.898597] RPC: Registered named UNIX socket transport module. Jun 30 05:37:51.833730 [ 0.904067] RPC: Registered udp transport module. Jun 30 05:37:51.833791 [ 0.908859] RPC: Registered tcp transport module. Jun 30 05:37:51.833838 [ 0.913614] RPC: Registered tcp-with-tls transport module. Jun 30 05:37:51.845713 [ 0.919186] RPC: Registered tcp NFSv4.1 backchannel transport module. Jun 30 05:37:51.845770 [ 0.925700] PCI: CLS 0 bytes, default 64 Jun 30 05:37:51.857720 [ 0.931096] Initialise system trusted keyrings Jun 30 05:37:51.857774 [ 0.934420] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Jun 30 05:37:51.869717 [ 0.940938] squashfs: version 4.0 (2009/01/31) Phillip Lougher Jun 30 05:37:51.869774 [ 0.946825] NFS: Registering the id_resolver key type Jun 30 05:37:51.881718 [ 0.951739] Key type id_resolver registered Jun 30 05:37:51.881771 [ 0.955994] Key type id_legacy registered Jun 30 05:37:51.881815 [ 0.960073] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Jun 30 05:37:51.893764 [ 0.966847] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Jun 30 05:37:51.893827 [ 0.974617] Trying to unpack rootfs image as initramfs... Jun 30 05:37:51.905682 [ 0.998254] Key type asymmetric registered Jun 30 05:37:51.929849 [ 1.001010] Asymmetric key parser 'x509' registered Jun 30 05:37:51.929908 [ 1.006049] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) Jun 30 05:37:51.941757 [ 1.013421] io scheduler mq-deadline registered Jun 30 05:37:51.941810 [ 1.018045] io scheduler kyber registered Jun 30 05:37:51.941854 [ 1.022128] io scheduler bfq registered Jun 30 05:37:51.953662 [ 1.164895] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 05:37:52.097732 [ 1.171104] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 05:37:52.109670 [ 1.232681] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 05:37:52.169714 [ 1.238947] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 05:37:52.169785 [ 1.267468] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 05:37:52.193754 [ 1.273711] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 05:37:52.205741 [ 1.314852] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 05:37:52.241752 [ 1.321057] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 05:37:52.253758 [ 1.333407] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 05:37:52.265750 [ 1.374629] xen:xen_evtchn: Event-channel device installed Jun 30 05:37:52.301731 [ 1.520234] Freeing initrd memory: 11860K Jun 30 05:37:52.445717 [ 1.614296] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 05:37:52.541737 [ 1.625249] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 05:37:52.553756 [ 1.633409] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 05:37:52.565781 [ 1.642347] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 05:37:52.577759 [ 1.651345] SuperH (H)SCI(F) driver initialized Jun 30 05:37:52.577818 [ 1.655677] STMicroelectronics ASC driver initialized Jun 30 05:37:52.589746 [ 1.660518] STM32 USART driver initialized Jun 30 05:37:52.589806 [ 1.667097] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 05:37:52.601723 [ 1.675997] random: crng init done Jun 30 05:37:52.601781 [ 1.683424] brd: module loaded Jun 30 05:37:52.613702 [ 1.689378] loop: module loaded Jun 30 05:37:52.613778 [ 1.711580] Invalid max_queues (4), will use default max: 2. Jun 30 05:37:52.637711 [ 1.730328] tun: Universal TUN/TAP device driver, 1.6 Jun 30 05:37:52.661724 [ 1.734230] CAN device driver interface Jun 30 05:37:52.661782 [ 1.739316] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Jun 30 05:37:52.673698 [ 1.750535] xen_netfront: Initialising Xen virtual ethernet driver Jun 30 05:37:52.685747 [ 1.755403] pegasus: Pegasus/Pegasus II USB Ethernet driver Jun 30 05:37:52.685809 [ 1.761002] usbcore: registered new interface driver pegasus Jun 30 05:37:52.685858 [ 1.766742] usbcore: registered new interface driver asix Jun 30 05:37:52.697760 [ 1.772219] usbcore: registered new interface driver ax88179_178a Jun 30 05:37:52.697823 [ 1.778370] usbcore: registered new interface driver cdc_ether Jun 30 05:37:52.709752 [ 1.784321] usbcore: registered new interface driver smsc75xx Jun 30 05:37:52.709814 [ 1.790082] usbcore: registered new interface driver smsc95xx Jun 30 05:37:52.721759 [ 1.795926] usbcore: registered new interface driver net1080 Jun 30 05:37:52.721821 [ 1.801632] usbcore: registered new interface driver cdc_subset Jun 30 05:37:52.733733 [ 1.807631] usbcore: registered new interface driver zaurus Jun 30 05:37:52.733733 [ 1.813261] usbcore: registered new interface driver cdc_ncm Jun 30 05:37:52.745744 [ 1.822754] usbcore: registered new interface driver usb-storage Jun 30 05:37:52.757710 [ 1.833322] i2c_dev: i2c /dev entries driver Jun 30 05:37:52.757769 [ 1.852025] device-mapper: uevent: version 1.0.3 Jun 30 05:37:52.781772 [ 1.855529] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev Jun 30 05:37:52.793749 [ 1.865055] cpu cpu0: OPP table can't be empty Jun 30 05:37:52.793809 [ 1.869770] failed to register cpuidle driver Jun 30 05:37:52.793855 [ 1.873156] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Jun 30 05:37:52.805752 [ 1.881525] sdhci: Secure Digital Host Controller Interface driver Jun 30 05:37:52.805815 [ 1.886540] sdhci: Copyright(c) Pierre Ossman Jun 30 05:37:52.817743 [ 1.894620] sdhci-pltfm: SDHCI platform and OF driver helper Jun 30 05:37:52.829733 [ 1.902371] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 05:37:52.829799 [ 1.907846] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Jun 30 05:37:52.841764 [ 1.914483] usbcore: registered new interface driver usbhid Jun 30 05:37:52.841825 [ 1.919149] usbhid: USB HID core driver Jun 30 05:37:52.853707 [ 1.930086] NET: Registered PF_INET6 protocol family Jun 30 05:37:52.853770 [ 1.934636] Segment Routing with IPv6 Jun 30 05:37:52.865740 [ 1.937455] In-situ OAM (IOAM) with IPv6 Jun 30 05:37:52.865798 [ 1.941480] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Jun 30 05:37:52.877744 [ 1.947943] NET: Registered PF_PACKET protocol family Jun 30 05:37:52.877806 [ 1.952526] can: controller area network core Jun 30 05:37:52.877853 [ 1.957010] NET: Registered PF_CAN protocol family Jun 30 05:37:52.889807 [ 1.961805] can: raw protocol Jun 30 05:37:52.889865 [ 1.964864] can: broadcast manager protocol Jun 30 05:37:52.889911 [ 1.969102] can: netlink gateway - max_hops=1 Jun 30 05:37:52.901761 [ 1.973839] Key type dns_resolver registered Jun 30 05:37:52.901820 [ 1.978539] ThumbEE CPU extension supported. Jun 30 05:37:52.901867 [ 1.982207] Registering SWP/SWPB emulation handler Jun 30 05:37:52.913716 [ 1.996655] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level Jun 30 05:37:52.925735 [ 2.003526] Loading compiled-in X.509 certificates Jun 30 05:37:52.937692 [ 2.046711] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 05:37:52.973747 [ 2.050310] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 05:37:52.985738 [ 2.056919] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 05:37:52.985843 [ 2.065107] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 05:37:52.997746 [ 2.106473] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 05:37:53.033737 [ 2.115332] s5m-rtc s5m-rtc: setting system clock to 2024-06-30T05:37:53 UTC (1719725873) Jun 30 05:37:53.045746 [ 2.126365] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 05:37:53.057746 [ 2.130971] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 05:37:53.057807 [ 2.135409] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 05:37:53.069744 [ 2.142105] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 05:37:53.069805 [ 2.148041] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 05:37:53.081728 [ 2.154239] clk: Not disabling unused clocks Jun 30 05:37:53.081728 [ 2.157713] PM: genpd: Disabling unused power domains Jun 30 05:37:53.081728 [ 2.166173] Freeing unused kernel image (initmem) memory: 2048K Jun 30 05:37:53.093761 [ 2.172445] Run /init as init process Jun 30 05:37:53.093823 Loading, please wait... Jun 30 05:37:53.129697 Starting systemd-udevd version 252.26-1~deb12u2 Jun 30 05:37:53.189720 [ 3.441742] i2c-gpio i2c-10: using lines 552 (SDA) and 553 (SCL) Jun 30 05:37:54.365585 [ 3.494721] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 05:37:54.425771 [ 3.501819] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 05:37:54.437693 [ 3.567736] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 05:37:54.497711 [ 3.580979] phy phy-12130000.phy.8: phy_power_on was called before phy_init Jun 30 05:37:54.509740 [ 3.586631] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 05:37:54.509802 [ 3.592169] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Jun 30 05:37:54.521743 [ 3.627677] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 Jun 30 05:37:54.557703 [ 3.676416] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 05:37:54.605718 [ 3.689043] hub 1-0:1.0: USB hub found Jun 30 05:37:54.617723 [ 3.691799] hub 1-0:1.0: 3 ports detected Jun 30 05:37:54.617781 [ 3.716517] phy phy-12130000.phy.8: phy_power_on was called before phy_init Jun 30 05:37:54.641777 [ 3.722703] exynos-ohci 12120000.usb: USB Host Controller Jun 30 05:37:54.653752 [ 3.729177] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Jun 30 05:37:54.653821 [ 3.746125] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 Jun 30 05:37:54.677716 [ 3.765639] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 30 05:37:54.689760 [ 3.771896] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 30 05:37:54.701738 [ 3.824350] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 30 05:37:54.749791 [ 3.830800] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 05:37:54.768316 [ 3.858861] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Jun 30 05:37:54.785741 [ 3.871026] hub 2-0:1.0: USB hub found Jun 30 05:37:54.797756 [ 3.874336] Synopsys Designware Multimedia Card Interface Driver Jun 30 05:37:54.797819 [ 3.875027] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 30 05:37:54.809766 [ 3.886651] ahci-dwc 122f0000.sata: AHCI vers 0001.0300, 32 command slots, 6 Gbps, platform mode Jun 30 05:37:54.821752 [ 3.895529] ahci-dwc 122f0000.sata: 1/1 ports implemented (port mask 0x1) Jun 30 05:37:54.821818 [ 3.902333] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 30 05:37:54.833764 [ 3.912324] hub 2-0:1.0: 3 ports detected Jun 30 05:37:54.833821 [ 3.939007] s3c-rtc 101e0000.rtc: registered as rtc1 Jun 30 05:37:54.869682 [ 3.955586] scsi host0: ahci-dwc Jun 30 05:37:54.881718 [ 3.969143] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 127 lpm-pol 0 Jun 30 05:37:54.893796 [ 4.474231] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 30 05:37:55.397758 [ 4.480004] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 30 05:37:55.409769 [ 4.485912] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 30 05:37:55.409833 [ 4.493514] ata1.00: configured for UDMA/133 Jun 30 05:37:55.421756 [ 4.497119] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 30 05:37:55.421825 [ 4.506357] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 30 05:37:55.433769 [ 4.512469] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 30 05:37:55.433827 [ 4.517863] sd 0:0:0:0: [sda] Write Protect is off Jun 30 05:37:55.445762 [ 4.522700] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 30 05:37:55.457750 [ 4.531894] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 30 05:37:55.457813 [ 4.557928] sda: sda1 sda2 < sda5 > Jun 30 05:37:55.481748 [ 4.560863] sd 0:0:0:0: [sda] Attached SCSI disk Jun 30 05:37:55.481807 [ 4.567413] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 30 05:37:55.493766 [ 4.573502] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 30 05:37:55.505706 [ 4.592518] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 30 05:37:55.517757 [ 4.597686] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 30 05:37:55.529748 [ 4.603208] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 128,32 bit host data width,128 deep fifo Jun 30 05:37:55.529821 [ 4.620034] mmc_host mmc0: card is polling. Jun 30 05:37:55.541728 [ 4.629144] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 30 05:37:55.553753 [ 4.634267] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 05:37:55.565765 [ 4.634270] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 30 05:37:55.565825 [ 4.649368] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 129,32 bit host data width,128 deep fifo Jun 30 05:37:55.577770 [ 4.663552] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Jun 30 05:37:55.589757 [ 4.671528] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 05:37:55.601758 [ 4.672003] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 05:37:55.601830 [ 4.675730] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 05:37:55.613769 [ 4.695485] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002000010 Jun 30 05:37:55.625752 [ 4.706778] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Jun 30 05:37:55.637756 [ 4.711642] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 05:37:55.637818 [ 4.717731] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 05:37:55.649798 [ 4.725333] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 05:37:55.649860 [ 4.741860] hub 3-0:1.0: USB hub found Jun 30 05:37:55.661725 [ 4.745521] hub 3-0:1.0: 1 port detected Jun 30 05:37:55.673712 [ 4.760529] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 05:37:55.685817 [ 4.778762] hub 4-0:1.0: USB hub found Jun 30 05:37:55.697717 [ 4.781508] hub 4-0:1.0: 1 port detected Jun 30 05:37:55.709758 [ 4.786543] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 30 05:37:55.721733 [ 4.797951] mmc0: new DDR MMC card at address 0001 Jun 30 05:37:55.721793 [ 4.806365] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Jun 30 05:37:55.733738 [ 4.817106] mmcblk0: p1 p2 p3 p4 Jun 30 05:37:55.745701 [ 4.828618] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Jun 30 05:37:55.757761 [ 4.833651] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Jun 30 05:37:55.757822 [ 4.841980] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Jun 30 05:37:55.769748 [ 4.928590] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 05:37:55.853782 [ 4.937325] mmc1: new high speed SDHC card at address aaaa Jun 30 05:37:55.865747 [ 4.943560] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Jun 30 05:37:55.865807 [ 5.314007] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 05:37:56.249792 [ 5.482979] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 05:37:56.417698 [ 5.591602] I/O error, dev mmcblk1, sector 7744000 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 05:37:56.525698 [ 5.699797] I/O error, dev mmcblk1, sector 7744001 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 05:37:56.633703 [ 5.807994] I/O error, dev mmcblk1, sector 7744002 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 05:37:56.741706 [ 5.916188] I/O error, dev mmcblk1, sector 7744003 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 05:37:56.849705 [ 6.024388] I/O error, dev mmcblk1, sector 7744004 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 05:37:56.957716 [ 6.132535] I/O error, dev mmcblk1, sector 7744005 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 05:37:57.065713 [ 6.240724] I/O error, dev mmcblk1, sector 7744006 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 05:37:57.173738 [ 6.348911] I/O error, dev mmcblk1, sector 7744007 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 05:37:57.281717 [ 6.457099] I/O error, dev mmcblk1, sector 7744008 op 0x0:(READ) flags 0x80700 phys_seg 13 prio class 0 Jun 30 05:37:57.389715 [ 6.565289] I/O error, dev mmcblk1, sector 7744009 op 0x0:(READ) flags 0x80700 phys_seg 13 prio class 0 Jun 30 05:37:57.497719 [ 8.583206] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 05:37:59.513674 [ 8.754670] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 05:37:59.681633 [ 9.477382] Buffer I/O error on dev mmcblk1, logical block 968000, async page read Jun 30 05:38:00.401763 Begin: Loading essential drivers ... done. Jun 30 05:38:00.461663 Begin: Running /scripts/init-premount ... done. Jun 30 05:38:03.473781 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 30 05:38:03.473864 Begin: Running /scripts/local-premount ... done. Jun 30 05:38:03.485701 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 30 05:38:03.545711 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 30 05:38:03.653748 /dev/mapper/arndale--metrocentre--vg-root: clean, 46073/1220608 files, 606043/4882432 blocks Jun 30 05:38:03.917697 done. Jun 30 05:38:03.929746 [ 13.008014] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 30 05:38:03.929816 [ 13.288283] EXT4-fs (dm-0): mounted filesystem 0470b348-50c0-4378-b138-d692a92f6d85 ro with ordered data mode. Quota mode: disabled. Jun 30 05:38:04.217854 done. Jun 30 05:38:04.229674 Begin: Running /scripts/local-bottom ... done. Jun 30 05:38:04.325728 Begin: Running /scripts/init-bottom ... done. Jun 30 05:38:04.373709 INIT: version 3.06 booting Jun 30 05:38:04.877747 INIT: No inittab.d directory found Jun 30 05:38:04.949693 Using makefile-style concurrent boot in runlevel S. Jun 30 05:38:05.261730 [ 15.382407] wm8994 3-001a: Device is not a WM8994, ID is 0 Jun 30 05:38:06.305779 [ 15.387559] wm8994 3-001a: probe with driver wm8994 failed with error -22 Jun 30 05:38:06.317724 Starting hotplug events dispatcher: systemd-udevd. Jun 30 05:38:06.953764 Synthesizing the initial hotplug events (subsystems)...done. Jun 30 05:38:07.409746 Synthesizing the initial hotplug events (devices)...done. Jun 30 05:38:08.237787 Waiting for /dev to be fully populated...[ 17.434230] usb3503 usb-hub: switched to HUB mode Jun 30 05:38:08.357778 [ 17.437686] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 05:38:08.369707 [ 17.487039] s5p-secss 10830000.sss: s5p-sss driver registered Jun 30 05:38:08.417694 [ 17.515915] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 30 05:38:08.441758 [ 17.538526] mc: Linux media interface: v0.10 Jun 30 05:38:08.465719 [ 17.618669] videodev: Linux video capture interface: v2.00 Jun 30 05:38:08.549713 [ 17.786554] usb 1-3: new high-speed USB device number 2 using exynos-ehci Jun 30 05:38:08.717704 [ 17.833312] s5p-mfc 11000000.codec: Adding to iommu group 0 Jun 30 05:38:08.765683 [ 17.929017] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Jun 30 05:38:08.861728 [ 17.967636] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 05:38:08.897777 [ 17.987175] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 05:38:08.921731 [ 17.994566] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 05:38:08.933673 [ 18.006812] s5p-mfc 11000000.codec: decoder registered as /dev/video0 Jun 30 05:38:08.933708 [ 18.012477] s5p-mfc 11000000.codec: encoder registered as /dev/video1 Jun 30 05:38:08.945718 [ 18.022408] hub 1-3:1.0: USB hub found Jun 30 05:38:08.945777 [ 18.025165] hub 1-3:1.0: 3 ports detected Jun 30 05:38:08.957681 [ 18.134293] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 05:38:09.065707 [ 18.192202] exynos-gsc 13e00000.gsc: Adding to iommu group 1 Jun 30 05:38:09.125628 [ 18.209812] exynos-gsc 13e10000.gsc: Adding to iommu group 2 Jun 30 05:38:09.137717 [ 18.234638] exynos-gsc 13e20000.gsc: Adding to iommu group 3 Jun 30 05:38:09.161728 [ 18.246843] exynos-gsc 13e30000.gsc: Adding to iommu group 4 Jun 30 05:38:09.173726 [ 18.270647] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Jun 30 05:38:09.197752 [ 18.328213] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 05:38:09.257788 [ 18.375189] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Jun 30 05:38:09.305750 [ 18.494493] blk_print_req_error: 24 callbacks suppressed Jun 30 05:38:09.425721 [ 18.494508] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 05:38:09.437597 [ 18.539006] hub 1-3.2:1.0: USB hub found Jun 30 05:38:09.461697 [ 18.542783] hub 1-3.2:1.0: 4 ports detected Jun 30 05:38:09.473730 [ 18.611408] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 05:38:09.545725 [ 18.719690] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 05:38:09.653721 [ 18.828633] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 05:38:09.761715 [ 18.864499] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 30 05:38:09.797704 [ 18.949177] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 05:38:09.881748 [ 18.956909] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 05:38:09.893745 [ 18.965600] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 05:38:09.905771 [ 18.976615] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 05:38:09.905843 [ 18.985221] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 05:38:09.917749 [ 18.993911] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 05:38:09.929777 [ 19.012179] I/O error, dev mmcblk1, sector 7743713 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 Jun 30 05:38:09.941760 [ 19.037370] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 30 05:38:09.965810 [ 19.120302] I/O error, dev mmcblk1, sector 7743714 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 Jun 30 05:38:10.049788 [ 19.228428] I/O error, dev mmcblk1, sector 7743715 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 Jun 30 05:38:10.157726 [ 19.510762] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 05:38:10.445715 [ 19.673924] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 05:38:10.601755 [ 19.735994] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 05:38:10.673725 [ 19.750368] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Jun 30 05:38:10.685771 [ 19.760207] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 5a:aa:ed:26:3e:1e Jun 30 05:38:10.697712 [ 19.788331] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 05:38:10.721746 [ 19.820350] usbcore: registered new device driver onboard-usb-dev Jun 30 05:38:10.745645 [ 19.827512] usb 1-3.2.4: USB disconnect, device number 4 Jun 30 05:38:10.757708 [ 19.831758] asix 1-3.2.4:1.0 eth0: unregister 'asix' usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet Jun 30 05:38:10.769691 [ 19.896123] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 05:38:10.829678 [ 20.003858] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 05:38:10.937822 [ 20.012298] hub 1-3.2:1.0: USB hub found Jun 30 05:38:10.937882 [ 20.015869] hub 1-3.2:1.0: 4 ports detected Jun 30 05:38:10.949675 [ 20.028144] hub 1-3.2:1.0: USB hub found Jun 30 05:38:10.949675 [ 20.031174] hub 1-3.2:1.0: 4 ports detected Jun 30 05:38:10.961686 [ 20.111641] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 05:38:11.045685 [ 20.354236] usb 1-3.2.4: new high-speed USB device number 5 using exynos-ehci Jun 30 05:38:11.285738 [ 21.176119] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:005:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 05:38:12.105838 [ 21.190489] Asix Electronics AX88772A usb-001:005:10: attached PHY driver (mii_bus:phy_addr=usb-001:005:10, irq=POLL) Jun 30 05:38:12.129704 [ 21.200368] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 5a:aa:ed:26:3e:1e Jun 30 05:38:12.141669 [ 21.301625] asix 1-3.2.4:1.0 enx5aaaed263e1e: renamed from eth0 Jun 30 05:38:12.225743 done. Jun 30 05:38:12.297686 [ 21.791630] EXT4-fs (dm-0): re-mounted 0470b348-50c0-4378-b138-d692a92f6d85 r/w. Quota mode: disabled. Jun 30 05:38:12.729685 Checking file systems.../dev/sda1: clean, 2179/61056 files, 44464/243968 blocks Jun 30 05:38:14.241740 done. Jun 30 05:38:14.277689 Cleaning up temporary files... /tmp Jun 30 05:38:14.457703 . Jun 30 05:38:14.457793 [ 23.748410] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 30 05:38:14.673755 [ 23.800319] EXT4-fs (sda1): mounted filesystem 46eda51d-cd67-4ed5-a5ad-cb77e619fb7a r/w with ordered data mode. Quota mode: disabled. Jun 30 05:38:14.733745 [ 23.900652] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k Jun 30 05:38:14.829778 Mounting local filesystems...done. Jun 30 05:38:15.081700 Activating swapfile swap, if any...done. Jun 30 05:38:15.081759 Cleaning up temporary files.... Jun 30 05:38:15.117702 Starting Setting kernel variables: sysctl. Jun 30 05:38:15.261758 Configuring network interfaces...RTNETLINK answers: Operation not supported Jun 30 05:38:16.005695 done. Jun 30 05:38:16.005749 Cleaning up temporary files.... Jun 30 05:38:16.077684 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Jun 30 05:38:16.125725 Starting nftables: none Jun 30 05:38:16.173688 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Jun 30 05:38:16.329739 failed! Jun 30 05:38:16.329791 startpar: service(s) returned failure: nftables ... failed! Jun 30 05:38:16.341713 INIT: Entering runlevel: 2 Jun 30 05:38:16.353695 Using makefile-style concurrent boot in runlevel 2. Jun 30 05:38:16.365724 Starting Apache httpd web server: apache2AH00557: apache2: apr_sockaddr_info_get() failed for arndale-metrocentre Jun 30 05:38:42.384516 AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1. Set the 'ServerName' directive globally to suppress this message Jun 30 05:38:42.396488 . Jun 30 05:38:55.525776 Starting NTP server: ntpd Jun 30 05:38:55.585732 2024-06-30T05:38:56 ntpd[1108]: INIT: ntpd ntpsec-1.2.2: Starting Jun 30 05:38:56.341769 2024-06-30T05:38:56 ntpd[1108]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 30 05:38:56.353794 . Jun 30 05:38:56.353822 Starting SMP IRQ Balancer: irqbalance. Jun 30 05:38:56.437760 Starting system message bus: dbus Jun 30 05:38:56.437792 . Jun 30 05:38:56.437813 Starting OpenBSD Secure Shell server: sshd. Jun 30 05:38:57.145740 Starting /usr/local/sbin/oxenstored... Jun 30 05:38:59.320786 Setting domain 0 name, domid and JSON config... Jun 30 05:38:59.332788 Done setting up Dom0 Jun 30 05:38:59.332872 Starting xenconsoled... Jun 30 05:38:59.332935 Starting QEMU as disk backend for dom0 Jun 30 05:38:59.332982 Jun 30 05:39:00.412698 Debian GNU/Linux 12 arndale-metrocentre hvc0 Jun 30 05:39:00.424650 Jun 30 05:39:00.424703 arndale-metrocentre login: INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 05:40:39.445471 Jun 30 05:44:27.583073 (XEN) *** Serial input to Xen (type 'CTRL-x' three times to switch input) Jun 30 05:44:27.601840 Jun 30 05:44:27.603139 Jun 30 05:44:28.592014 (XEN) '0' pressed -> dumping Dom0's registers Jun 30 05:44:28.613867 (XEN) *** Dumping Dom0 vcpu#0 state: *** Jun 30 05:44:28.613907 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Jun 30 05:44:28.616215 Not tainted ]---- Jun 30 05:44:28.625615 (XEN) CPU: 0 Jun 30 05:44:28.625615 (XEN) PC: c031be28 Jun 30 05:44:28.625615 (XEN) CPSR: 600e0093 MODE:32-bit Guest SVC Jun 30 05:44:28.625615 (XEN) R0: 00000005 R1: 00000000 R2: 0003cfb9 R3: c031be20 Jun 30 05:44:28.637770 (XEN) R4: c1b09d40 R5: c1d26f50 R6: c1b04e5c R7: c1b04e98 Jun 30 05:44:28.637833 (XEN) R8: 00000000 R9: 00000000 R10:000000ad R11:00000000 R12:c1d264a0 Jun 30 05:44:28.649665 (XEN) USR: SP: beec8938 LR: b6c28853 Jun 30 05:44:28.649698 (XEN) SVC: SP: c1b01f78 LR: c114e078 SPSR:600e0013 Jun 30 05:44:28.649724 (XEN) ABT: SP: c1d38b10 LR: c0300ec0 SPSR:60030193 Jun 30 05:44:28.661677 (XEN) UND: SP: c1d38b20 LR: c0300fc0 SPSR:600e0093 Jun 30 05:44:28.661677 (XEN) IRQ: SP: c1d38b00 LR: c0300bc0 SPSR:600e0193 Jun 30 05:44:28.673873 (XEN) FIQ: SP: c1d38b30 LR: c1d38b30 SPSR:00000000 Jun 30 05:44:28.673873 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Jun 30 05:44:28.673873 (XEN) Jun 30 05:44:28.685641 (XEN) SCTLR: 10c5387d Jun 30 05:44:28.685653 (XEN) TCR: 00000000 Jun 30 05:44:28.685688 (XEN) TTBR0: 0000000063cec06a Jun 30 05:44:28.685688 (XEN) TTBR1: 000000006020406a Jun 30 05:44:28.685688 (XEN) IFAR: b6eb3c34, IFSR: 00000007 Jun 30 05:44:28.697790 (XEN) DFAR: b6ee8abc, DFSR: 0000081f Jun 30 05:44:28.697878 (XEN) Jun 30 05:44:28.697955 (XEN) VTCR_EL2: 80003558 Jun 30 05:44:28.698001 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 05:44:28.709706 (XEN) Jun 30 05:44:28.709759 (XEN) SCTLR_EL2: 30cd187f Jun 30 05:44:28.709811 (XEN) HCR_EL2: 007c663f Jun 30 05:44:28.709833 (XEN) TTBR0_EL2: 0000000041107000 Jun 30 05:44:28.709856 (XEN) Jun 30 05:44:28.709876 (XEN) ESR_EL2: 07e00000 Jun 30 05:44:28.721754 (XEN) HPFAR_EL2: 00104810 Jun 30 05:44:28.721809 (XEN) HDFAR: e0807f00 Jun 30 05:44:28.721852 (XEN) HIFAR: c0ac9320 Jun 30 05:44:28.721894 (XEN) Jun 30 05:44:28.721931 (XEN) Guest stack trace from sp=c1b01f78: Jun 30 05:44:28.733726 (XEN) Failed to convert stack to physical address Jun 30 05:44:28.733787 (XEN) *** Dumping Dom0 vcpu#1 state: *** Jun 30 05:44:28.733832 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Not tainted ]---- Jun 30 05:44:28.745766 (XEN) CPU: 0 Jun 30 05:44:28.745820 (XEN) PC: c031be28 Jun 30 05:44:28.745862 (XEN) CPSR: 60070093 MODE:32-bit Guest SVC Jun 30 05:44:28.745906 (XEN) R0: 00000005 R1: 00000000 R2: 0000ff59 R3: c031be20 Jun 30 05:44:28.757755 (XEN) R4: c2110880 R5: c1d26f50 R6: c1b04e5c R7: c1b04e98 Jun 30 05:44:28.757815 (XEN) R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:c1d264a0 Jun 30 05:44:28.769747 (XEN) USR: SP: beb3d960 LR: b6dc4685 Jun 30 05:44:28.769804 (XEN) SVC: SP: e08d9fa0 LR: c114e078 SPSR:60070013 Jun 30 05:44:28.769847 (XEN) ABT: SP: c1d38b50 LR: c0300ec0 SPSR:60010193 Jun 30 05:44:28.781752 (XEN) UND: SP: c1d38b60 LR: c0300fc0 SPSR:60000093 Jun 30 05:44:28.781811 (XEN) IRQ: SP: c1d38b40 LR: c0300bc0 SPSR:60070193 Jun 30 05:44:28.793750 (XEN) FIQ: SP: c1d38b70 LR: c1d38b70 SPSR:00000000 Jun 30 05:44:28.793809 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Jun 30 05:44:28.805744 (XEN) Jun 30 05:44:28.805796 (XEN) SCTLR: 10c5387d Jun 30 05:44:28.805839 (XEN) TCR: 00000000 Jun 30 05:44:28.805880 (XEN) TTBR0: 000000006704406a Jun 30 05:44:28.805921 (XEN) TTBR1: 000000006020406a Jun 30 05:44:28.817736 (XEN) IFAR: b6ef69dc, IFSR: 00000007 Jun 30 05:44:28.817795 (XEN) DFAR: b6cf2ff4, DFSR: 00000817 Jun 30 05:44:28.817840 (XEN) Jun 30 05:44:28.817878 (XEN) VTCR_EL2: 80003558 Jun 30 05:44:28.817919 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 05:44:28.829778 (XEN) Jun 30 05:44:28.829829 (XEN) SCTLR_EL2: 30cd187f Jun 30 05:44:28.829871 (XEN) HCR_EL2: 007c663f Jun 30 05:44:28.829893 (XEN) TTBR0_EL2: 0000000041107000 Jun 30 05:44:28.829916 (XEN) Jun 30 05:44:28.829936 (XEN) ESR_EL2: 07e00000 Jun 30 05:44:28.841748 (XEN) HPFAR_EL2: 00104810 Jun 30 05:44:28.841803 (XEN) HDFAR: e0807f00 Jun 30 05:44:28.841845 (XEN) HIFAR: c0ac9320 Jun 30 05:44:28.841886 (XEN) Jun 30 05:44:28.841923 (XEN) Guest stack trace from sp=e08d9fa0: Jun 30 05:44:28.853725 (XEN) Failed to convert stack to physical address Jun 30 05:44:28.853785 Jun 30 05:44:30.594856 (XEN) 'H' pressed -> dumping heap info (now = 405045655375) Jun 30 05:44:30.609820 (XEN) heap[node=0][zone=0] -> Jun 30 05:44:30.610803 16284 pages Jun 30 05:44:30.621715 (XEN) heap[node=0][zone=1] -> 0 pages Jun 30 05:44:30.621772 (XEN) heap[node=0][zone=2] -> 0 pages Jun 30 05:44:30.621816 (XEN) heap[node=0][zone=3] -> 0 pages Jun 30 05:44:30.621859 (XEN) heap[node=0][zone=4] -> 0 pages Jun 30 05:44:30.633802 (XEN) heap[node=0][zone=5] -> 0 pages Jun 30 05:44:30.633861 (XEN) heap[node=0][zone=6] -> 0 pages Jun 30 05:44:30.633904 (XEN) heap[node=0][zone=7] -> 0 pages Jun 30 05:44:30.645742 (XEN) heap[node=0][zone=8] -> 0 pages Jun 30 05:44:30.645802 (XEN) heap[node=0][zone=9] -> 0 pages Jun 30 05:44:30.645846 (XEN) heap[node=0][zone=10] -> 0 pages Jun 30 05:44:30.645889 (XEN) heap[node=0][zone=11] -> 0 pages Jun 30 05:44:30.657775 (XEN) heap[node=0][zone=12] -> 0 pages Jun 30 05:44:30.657835 (XEN) heap[node=0][zone=13] -> 0 pages Jun 30 05:44:30.657879 (XEN) heap[node=0][zone=14] -> 0 pages Jun 30 05:44:30.669795 (XEN) heap[node=0][zone=15] -> 0 pages Jun 30 05:44:30.669857 (XEN) heap[node=0][zone=16] -> 0 pages Jun 30 05:44:30.669902 (XEN) heap[node=0][zone=17] -> 0 pages Jun 30 05:44:30.669945 (XEN) heap[node=0][zone=18] -> 0 pages Jun 30 05:44:30.681758 (XEN) heap[node=0][zone=19] -> 130833 pages Jun 30 05:44:30.681818 (XEN) heap[node=0][zone=20] -> 241626 pages Jun 30 05:44:30.681863 (XEN) heap[node=0][zone=21] -> 0 pages Jun 30 05:44:30.693762 (XEN) heap[node=0][zone=22] -> 0 pages Jun 30 05:44:30.693821 (XEN) heap[node=0][zone=23] -> 0 pages Jun 30 05:44:30.693865 (XEN) heap[node=0][zone=24] -> 0 pages Jun 30 05:44:30.705745 (XEN) heap[node=0][zone=25] -> 0 pages Jun 30 05:44:30.705805 (XEN) heap[node=0][zone=26] -> 0 pages Jun 30 05:44:30.705849 (XEN) heap[node=0][zone=27] -> 0 pages Jun 30 05:44:30.705892 (XEN) heap[node=0][zone=28] -> 0 pages Jun 30 05:44:30.717701 Jun 30 05:44:32.604713 Jun 30 05:44:34.376625 Jun 30 05:44:34.656647 Jun 30 05:44:36.412662 Jun 30 05:44:36.656321 (XEN) Dumping timer queues: Jun 30 05:44:36.673825 (XEN) CPU00: Jun 30 05:44:36.673891 (XEN) ex= 265475us timer=43fdc968 cb=vtimer.c#virt_timer_expired(43fdc960) Jun 30 05:44:36.673946 (XEN) CPU0 Jun 30 05:44:36.676277 1: Jun 30 05:44:36.681665 (XEN) ex= 46197us timer=43fef968 cb=vtimer.c#virt_timer_expired(43fef960) Jun 30 05:44:36.681732 Jun 30 05:44:38.663714 Jun 30 05:44:40.420995 Jun 30 05:44:40.634194 (XEN) 'd' pressed -> dumping registers Jun 30 05:44:40.653859 (XEN) Jun 30 05:44:40.653931 (XEN) *** Dumping CPU0 host state: *** Jun 30 05:44:40.653991 (XEN) ----[ Xen-4.19-unstable arm32 debug=y N Jun 30 05:44:40.656342 ot tainted ]---- Jun 30 05:44:40.665589 (XEN) CPU: 0 Jun 30 05:44:40.665625 (XEN) PC: 0025ef7c domain.c#idle_loop+0x130/0x1ac Jun 30 05:44:40.665655 (XEN) CPSR: 6007005a MODE:Hypervisor Jun 30 05:44:40.665692 (XEN) R0: 00000000 R1: 0029f300 R2: 00000000 R3: 00000000 Jun 30 05:44:40.677678 (XEN) R4: 00000000 R5: 002f80e0 R6: 0032b324 R7: 00000001 Jun 30 05:44:40.677712 (XEN) R8: 0032b104 R9: 00000000 R10:40e00000 R11:4003ff54 R12:fffffffc Jun 30 05:44:40.689645 (XEN) HYP: SP: 4003ff44 LR: 00225cb8 Jun 30 05:44:40.689676 (XEN) Jun 30 05:44:40.689697 (XEN) VTCR_EL2: 80003558 Jun 30 05:44:40.689720 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 05:44:40.701658 (XEN) Jun 30 05:44:40.701686 (XEN) SCTLR_EL2: 30cd187f Jun 30 05:44:40.701710 (XEN) HCR_EL2: 007c663f Jun 30 05:44:40.701732 (XEN) TTBR0_EL2: 0000000041107000 Jun 30 05:44:40.701755 (XEN) Jun 30 05:44:40.713661 (XEN) ESR_EL2: 07e00000 Jun 30 05:44:40.713693 (XEN) HPFAR_EL2: 00104810 Jun 30 05:44:40.713716 (XEN) HDFAR: e0807f00 Jun 30 05:44:40.713739 (XEN) HIFAR: c0ac9320 Jun 30 05:44:40.713761 (XEN) Jun 30 05:44:40.713786 (XEN) Xen stack trace from sp=4003ff44: Jun 30 05:44:40.725635 (XEN) 07e00000 00295014 002919ac 4003ff4c 00267818 00000000 00000000 00000000 Jun 30 05:44:40.725666 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 05:44:40.737657 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 05:44:40.737691 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 05:44:40.749659 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 05:44:40.761660 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 05:44:40.761693 (XEN) Xen call trace: Jun 30 05:44:40.761716 (XEN) [<0025ef7c>] domain.c#idle_loop+0x130/0x1ac (PC) Jun 30 05:44:40.773680 (XEN) [<00225cb8>] rcu_needs_cpu+0x40/0x60 (LR) Jun 30 05:44:40.773713 (XEN) [<00267818>] arch_get_xen_caps+0/0x90 Jun 30 05:44:40.773739 (XEN) Jun 30 05:44:40.785655 (XEN) *** Dumping CPU1 host state: *** Jun 30 05:44:40.785687 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Not tainted ]---- Jun 30 05:44:40.785714 (XEN) CPU: 1 Jun 30 05:44:40.785736 (XEN) PC: 0025ef7c domain.c#idle_loop+0x130/0x1ac Jun 30 05:44:40.797667 (XEN) CPSR: 600e005a MODE:Hypervisor Jun 30 05:44:40.797699 (XEN) R0: 00000000 R1: 0029f300 R2: 3fd0e000 R3: 00000000 Jun 30 05:44:40.809659 (XEN) R4: 00000001 R5: 002f80e0 R6: 0032b324 R7: 00000002 Jun 30 05:44:40.809692 (XEN) R8: 0032b104 R9: 00000001 R10:40e00000 R11:4000ff54 R12:fffffffc Jun 30 05:44:40.821652 (XEN) HYP: SP: 4000ff44 LR: 00225cb8 Jun 30 05:44:40.821684 (XEN) Jun 30 05:44:40.821705 (XEN) VTCR_EL2: 80003558 Jun 30 05:44:40.821728 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 05:44:40.821751 (XEN) Jun 30 05:44:40.821772 (XEN) SCTLR_EL2: 30cd187f Jun 30 05:44:40.833658 (XEN) HCR_EL2: 007c663f Jun 30 05:44:40.833688 (XEN) TTBR0_EL2: 00000000ba004000 Jun 30 05:44:40.833712 (XEN) Jun 30 05:44:40.833733 (XEN) ESR_EL2: 07e00000 Jun 30 05:44:40.833755 (XEN) HPFAR_EL2: 00104810 Jun 30 05:44:40.845670 (XEN) HDFAR: e0807f00 Jun 30 05:44:40.845700 (XEN) HIFAR: c0d9e04c Jun 30 05:44:40.845724 (XEN) Jun 30 05:44:40.845744 (XEN) Xen stack trace from sp=4000ff44: Jun 30 05:44:40.845768 (XEN) 07e00000 002f9290 00000001 4000ff3c 002680f4 00000000 00000000 00000000 Jun 30 05:44:40.857657 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 05:44:40.869640 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 05:44:40.869674 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 05:44:40.881752 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 05:44:40.881814 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 05:44:40.893754 (XEN) Xen call trace: Jun 30 05:44:40.893817 (XEN) [<0025ef7c>] domain.c#idle_loop+0x130/0x1ac (PC) Jun 30 05:44:40.893866 (XEN) [<00225cb8>] rcu_needs_cpu+0x40/0x60 (LR) Jun 30 05:44:40.905639 (XEN) [<002680f4>] start_secondary+0x204/0x20c Jun 30 05:44:40.905672 (XEN) Jun 30 05:44:40.905693 Jun 30 05:44:42.657496 (XEN) 'e' pressed -> dumping event-channel info Jun 30 05:44:42.677867 (XEN) Event channel information for domain 0: Jun 30 05:44:42.677944 (XEN) Polling vCPUs: {} Jun 30 05:44:42.678002 (XEN) port Jun 30 05:44:42.680004 [p/m/s] Jun 30 05:44:42.689724 (XEN) 1 [0/0/ - ]: s=3 n=1 x=0 d=0 p=4 Jun 30 05:44:42.689781 (XEN) 2 [0/0/ - ]: s=5 n=0 x=0 v=2 Jun 30 05:44:42.689827 (XEN) 3 [0/0/ - ]: s=5 n=1 x=0 v=3 Jun 30 05:44:42.701699 (XEN) 4 [0/0/ - ]: s=3 n=0 x=0 d=0 p=1 Jun 30 05:44:42.701758 Jun 30 05:44:44.665418 (XEN) gnttab_usage_print_all [ key 'g' pressed Jun 30 05:44:44.688800 (XEN) -------- active -------- -------- shared -------- Jun 30 05:44:44.688876 (XEN) [ref] localdom mfn pin Jun 30 05:44:44.691599 localdom gmfn flags Jun 30 05:44:44.697238 (XEN) grant-table for remote d0 (v1) Jun 30 05:44:44.697238 (XEN) 1 frames (64 max), 0 maptrack frames (1024 max) Jun 30 05:44:44.711480 (XEN) no active grant table entries Jun 30 05:44:44.711544 (XEN) gnttab_usage_print_all ] done Jun 30 05:44:44.711589 Jun 30 05:44:46.631739 Jun 30 05:44:48.433450 Jun 30 05:44:48.640847 (XEN) Physical memory information: Jun 30 05:44:48.665682 (XEN) Xen heap: 65136kB free Jun 30 05:44:48.665741 (XEN) heap[19]: 523332kB free Jun 30 05:44:48.665775 (XEN) heap[20]: 966504kB fr Jun 30 05:44:48.667001 ee Jun 30 05:44:48.677566 (XEN) Dom heap: 1489836kB free Jun 30 05:44:48.677567 Jun 30 05:44:50.669664 Jun 30 05:44:52.441328 Jun 30 05:44:52.684880 (XEN) sched_smt_power_savings: disabled Jun 30 05:44:52.704627 (XEN) NOW=427136838541 Jun 30 05:44:52.704627 (XEN) Online Cpus: 0-1 Jun 30 05:44:52.704627 (XEN) Cpupool 0: Jun 30 05:44:52.704627 (XEN) Cpus: 0-1 Jun 30 05:44:52.704627 (XEN) Schedu Jun 30 05:44:52.706988 ling granularity: cpu, 1 CPU per sched-resource Jun 30 05:44:52.716464 (XEN) Scheduler: SMP RTDS Scheduler (rtds) Jun 30 05:44:52.716464 (XEN) Global RunQueue info: Jun 30 05:44:52.716464 (XEN) Global DepletedQueue info: Jun 30 05:44:52.728453 (XEN) Global Replenishment Events info: Jun 30 05:44:52.728453 (XEN) Domain info: Jun 30 05:44:52.728453 (XEN) domain: 0 Jun 30 05:44:52.728453 (XEN) [ 0.0 ] cpu 1, (10000000, 4000000), cur_b=3959334 cur_d=427070000000 last_start=427069186416 Jun 30 05:44:52.740452 (XEN) priority_level=0 has_extratime=1 Jun 30 05:44:52.740452 (XEN) onQ=0 runnable=0 flags=10 effective hard_affinity=0-1 Jun 30 05:44:52.752451 (XEN) [ 0.1 ] cpu 0, (10000000, 4000000), cur_b=3914000 cur_d=426900000000 last_start=426891328458 Jun 30 05:44:52.752451 (XEN) priority_level=0 has_extratime=1 Jun 30 05:44:52.764583 (XEN) onQ=0 runnable=0 flags=10 effective hard_affinity=0-1 Jun 30 05:44:52.764651 (XEN) CPUs info: Jun 30 05:44:52.764692 (XEN) CPU[00] current=d[IDLE]v0, curr=d[IDLE]v0, prev=NULL Jun 30 05:44:52.776465 (XEN) CPU[00] Jun 30 05:44:52.776465 (XEN) CPU[01] current=d[IDLE]v1, curr=d[IDLE]v1, prev=NULL Jun 30 05:44:52.776465 (XEN) CPU[01] Jun 30 05:44:52.776465 Jun 30 05:44:54.677673 Jun 30 05:44:56.450114 Jun 30 05:44:56.677759 (XEN) Synced stime skew: max=84ns avg=84ns samples=1 current=84ns Jun 30 05:44:56.700707 (XEN) Synced cycles skew: max=2 avg=2 samples=1 current=2 Jun 30 05:44:56.700707 Jun 30 05:44:56.702857 Jun 30 05:44:58.695392 Jun 30 05:45:00.459778 Jun 30 05:45:00.701899 Jun 30 05:45:02.466336 Jun 30 05:45:02.709291 Jun 30 05:45:04.472870 Jun 30 05:45:14.680279 (XEN) 'q' pressed -> dumping domain info (now = 449137082333) Jun 30 05:45:14.705907 (XEN) General information for domain 0: Jun 30 05:45:14.705968 (XEN) refcnt=3 dying=0 pause_count=0 Jun 30 05:45:14.706014 (XEN) nr_pages=131072 xenheap_pa Jun 30 05:45:14.709017 ges=2 dirty_cpus={} max_pages=131072 Jun 30 05:45:14.717764 (XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=00000020 Jun 30 05:45:14.717828 (XEN) p2m mappings for domain 0 (vmid 1): Jun 30 05:45:14.729841 (XEN) 1G mappings: 0 (shattered 0) Jun 30 05:45:14.729900 (XEN) 2M mappings: 255 (shattered 1) Jun 30 05:45:14.729946 (XEN) 4K mappings: 944 Jun 30 05:45:14.729987 (XEN) Rangesets belonging to domain 0: Jun 30 05:45:14.741814 (XEN) Interrupts { 32-72, 74, 77-79, 82-84, 86, 88-100, 103-104, 107-110, 114, 116-120, 123, 126-128, 138, 144, 146-147, 149-151, 156 } Jun 30 05:45:14.753784 (XEN) I/O Memory { 2020-2050, 3810-3811, 3830-3831, 3860-3861, 10000-10001, 10010-10045, 10050-10055, 10060-10061, 101b0-101b1, 101d0-101d1, 101e0-101e1, 10440-10441, 10800-10801, 10830-10831, 10850-10851, 10a60-10a61, 10d10-10d11, 11000-11010, 11200-11201, 11210-11211, 11400-11401, 11800-11805, 11c00-11c01, 11c10-11c11, 11d40-11d41, 11f20-11f21, 12000-12010, 12100-12101, 12110-12111, 12120-12121, 12130-12131, 12170-12171, 121a0-121a1, 121b0-121b1, 121d0-121d1, 12200-12201, 12210-12211, 12220-12221, 12230-12231, 12250-12251, 122f0-122f1, 12c00-12c01, 12c10-12c11, 12c30-12c31, 12c60-12c61, 12c70-12c71, 12c80-12c81, 12c90-12c91, 12ca0-12ca1, 12cb0-12cb1, 12cc0-12cc1, 12cd0-12cd1, 12ce0-12ce1, 12d10-12d11, 12d20-12d21, 12d30-12d31, 12d40-12d41, 12d60-12d61, 12d70-12d71, 12dd0-12dd1, 13260-13261, 13270-13271, 13280-13281, 13290-13291, 132a0-132a1, 132b0-132b1, 132c0-132c1, 132d0-132d1, 132e0-132e1, 132f0-132f1, 13400-13401, 13c40-13c41, 13c50-13c51, 13e00-13e01, 13e10-13e11, 13e20-13e21, 13e30-13e31, 13e80-13e81, 13e90-13e91, 13ea0-13ea1, 13eb0-13eb1, 14400-14440, 14450-14460, 14500-14510, 14530-145a0, 145b0-145b1, 14640-14641, 14650-14651 } Jun 30 05:45:14.849800 (XEN) NODE affinity for domain 0: [0] Jun 30 05:45:14.849859 (XEN) VCPU information and callbacks for domain 0: Jun 30 05:45:14.861765 (XEN) UNIT0 affinities: hard={0-1} soft={0-1} Jun 30 05:45:14.861824 (XEN) VCPU0: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Jun 30 05:45:14.873760 (XEN) pause_count=0 pause_flags=1 Jun 30 05:45:14.873818 (XEN) GICH_LRs (vcpu 0) mask=0 Jun 30 05:45:14.873862 (XEN) VCPU_LR[0]=0 Jun 30 05:45:14.873902 (XEN) VCPU_LR[1]=0 Jun 30 05:45:14.873941 (XEN) VCPU_LR[2]=0 Jun 30 05:45:14.885771 (XEN) VCPU_LR[3]=0 Jun 30 05:45:14.885826 (XEN) No periodic timer Jun 30 05:45:14.885869 (XEN) UNIT1 affinities: hard={0-1} soft={0-1} Jun 30 05:45:14.885914 (XEN) VCPU1: CPU0 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Jun 30 05:45:14.897764 (XEN) pause_count=0 pause_flags=1 Jun 30 05:45:14.897821 (XEN) GICH_LRs (vcpu 1) mask=0 Jun 30 05:45:14.897865 (XEN) VCPU_LR[0]=0 Jun 30 05:45:14.897905 (XEN) VCPU_LR[1]=0 Jun 30 05:45:14.909761 (XEN) VCPU_LR[2]=0 Jun 30 05:45:14.909815 (XEN) VCPU_LR[3]=0 Jun 30 05:45:14.909857 (XEN) No periodic timer Jun 30 05:45:14.909898 (XEN) Notifying guest 0:0 (virq 1, port 0) Jun 30 05:45:14.909974 (XEN) Notifying guest 0:1 (virq 1, port 0) Jun 30 05:45:14.921708 Jun 30 05:45:26.692532 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 30 05:45:26.713691 Jun 30 05:45:26.713721 arndale-metrocentre login: Jun 30 05:45:26.714758 Jun 30 05:47:16.624764 Jun 30 05:47:16.624873 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 05:47:16.624930 Jun 30 05:47:16.636771 CPU: Exynos5250@1000MHz Jun 30 05:47:16.636830 Jun 30 05:47:16.636869 Board: Arndale Jun 30 05:47:16.636911 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 05:47:16.636959 ready Jun 30 05:47:16.636997 DRAM: 2 GiB Jun 30 05:47:16.637037 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 05:47:16.660751 trace: enabled Jun 30 05:47:16.696742 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 05:47:17.056719 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 05:47:17.116723 In: serial Jun 30 05:47:17.116754 Out: serial Jun 30 05:47:17.116777 Err: serial Jun 30 05:47:17.116800 SCSI: ARNDALE SCSI INIT Jun 30 05:47:17.116823 Target spinup took 0 ms. Jun 30 05:47:17.128820 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 05:47:17.128882 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 05:47:17.140779 Net: Net Initialization Skipped Jun 30 05:47:17.140838 No ethernet found. Jun 30 05:47:17.140880 Hostname: arndale-metrocentre Jun 30 05:47:17.140923 Hit any key to stop autoboot: 2  1  0 Jun 30 05:47:19.068738 (Re)start USB... Jun 30 05:47:19.068804 USB0: USB EHCI 1.00 Jun 30 05:47:19.068847 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 05:47:24.669651 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 05:47:24.669651 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 05:47:25.125643 Waiting for Ethernet connection... done. Jun 30 05:47:26.769612 BOOTP broadcast 1 Jun 30 05:47:26.769612 BOOTP broadcast 2 Jun 30 05:47:28.281631 DHCP client bound to address 10.149.64.44 (1579 ms) Jun 30 05:47:28.281631 Using asx0 device Jun 30 05:47:28.293666 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 05:47:28.293666 Filename 'pxelinux.0'. Jun 30 05:47:28.293666 Load address: 0x43e00000 Jun 30 05:47:28.293666 Loading: *### Jun 30 05:47:28.317650 2.2 MiB/s Jun 30 05:47:28.317650 done Jun 30 05:47:28.317650 Bytes transferred = 42430 (a5be hex) Jun 30 05:47:28.317650 missing environment variable: pxeuuid Jun 30 05:47:28.317650 Retrieving file: pxelinux.cfg/0A95402C Jun 30 05:47:28.329664 Using asx0 device Jun 30 05:47:28.329664 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 05:47:28.329664 Filename 'pxelinux.cfg/0A95402C'. Jun 30 05:47:28.341846 Load address: 0x51000000 Jun 30 05:47:28.341846 Loading: *# Jun 30 05:47:28.341846 31.3 KiB/s Jun 30 05:47:28.341846 done Jun 30 05:47:28.341846 Bytes transferred = 65 (41 hex) Jun 30 05:47:28.341846 Config file found Jun 30 05:47:28.341846 Ignoring unknown command: serial Jun 30 05:47:28.353703 1: local Jun 30 05:47:28.353703 scanning bus for devices... Jun 30 05:47:28.353813 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 05:47:28.365754 Type: Hard Disk Jun 30 05:47:28.377756 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 05:47:28.377818 Found 1 device(s). Jun 30 05:47:28.377860 Jun 30 05:47:28.377897 SCSI device 0: Jun 30 05:47:28.377937 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 05:47:28.389817 Type: Hard Disk Jun 30 05:47:28.389873 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 05:47:28.389921 ... is now current device Jun 30 05:47:28.401700 Scanning scsi 0... Jun 30 05:47:28.401754 Found U-Boot script /boot.scr Jun 30 05:47:28.581694 1779 bytes read in 44 ms (39.1 KiB/s) Jun 30 05:47:28.629754 ## Executing script at 50000000 Jun 30 05:47:28.629810 Loading dtbs/6.10.0-rc5+/exynos5250-arndale.dtb Jun 30 05:47:28.629856 46641 bytes read in 2400 ms (18.6 KiB/s) Jun 30 05:47:30.957640 983052 bytes read in 106 ms (8.8 MiB/s) Jun 30 05:47:31.089687 Loaded xen-4.19-unstable to 0x41000000 (f000c) Jun 30 05:47:31.089720 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan sched=rtds Jun 30 05:47:31.101659 10785280 bytes read in 507 ms (20.3 MiB/s) Jun 30 05:47:31.605643 Loaded vmlinuz-6.10.0-rc5+ to 0x42000000 (a49200) Jun 30 05:47:31.617668 command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 05:47:31.629660 12142267 bytes read in 544 ms (21.3 MiB/s) Jun 30 05:47:32.169640 Loaded initrd.img-6.10.0-rc5+ to 0x43300000 (b946bb) Jun 30 05:47:32.181681 chosen { Jun 30 05:47:32.181710 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan sched=rtds"; Jun 30 05:47:32.193691 #size-cells = <0x00000001>; Jun 30 05:47:32.193721 #address-cells = <0x00000001>; Jun 30 05:47:32.193744 stdout-path = "serial2:115200n8"; Jun 30 05:47:32.205684 module@1 { Jun 30 05:47:32.205713 reg = <0x43300000 0x00b946bb>; Jun 30 05:47:32.205737 compatible = "xen,linux-initrd", "xen,multiboot-module"; Jun 30 05:47:32.217685 }; Jun 30 05:47:32.217714 module@0 { Jun 30 05:47:32.217736 bootargs = "ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Jun 30 05:47:32.229690 reg = <0x42000000 0x00a49200>; Jun 30 05:47:32.229720 compatible = "xen,linux-zimage", "xen,multiboot-module"; Jun 30 05:47:32.241701 }; Jun 30 05:47:32.241730 }; Jun 30 05:47:32.241751 Booting 0x41000000 - 0x43000000 Jun 30 05:47:32.241774 Kernel image @ 0x41000000 [ 0x000000 - 0x12f000 ] Jun 30 05:47:32.241798 ## Flattened Device Tree blob at 43000000 Jun 30 05:47:32.253686 Booting using the fdt blob at 0x43000000 Jun 30 05:47:32.253717 reserving fdt memory region: addr=43000000 size=c000 Jun 30 05:47:32.253743 Loading Device Tree to 4fff1000, end 4fffffff ... OK Jun 30 05:47:32.265664 Jun 30 05:47:32.265692 Starting kernel ...(fake run for tracing) Jun 30 05:47:32.265716 Jun 30 05:47:32.265736 Jun 30 05:47:32.277621 Starting kernel ... Jun 30 05:47:32.277651 Jun 30 05:47:32.277672 __ __ _ _ _ ___ _ _ _ Jun 30 05:47:32.325687 \ \/ /___ _ __ | || | / |/ _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Jun 30 05:47:32.337685 \ // _ \ '_ \ | || |_ | | (_) |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Jun 30 05:47:32.337719 / \ __/ | | | |__ _|| |\__, |__| |_| | | | \__ \ || (_| | |_) | | __/ Jun 30 05:47:32.349684 /_/\_\___|_| |_| |_|(_)_| /_/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Jun 30 05:47:32.349718 Jun 30 05:47:32.349738 (XEN) Xen version 4.19-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Sun Jun 30 01:52:15 UTC 2024 Jun 30 05:47:32.361695 (XEN) Latest ChangeSet: Wed Jun 26 16:07:30 2024 +0100 git:08f9b1dd9c Jun 30 05:47:32.373683 (XEN) build-id: a1f1bc3a5986d3ec30239a56d95725b8f32801f2 Jun 30 05:47:32.373716 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Jun 30 05:47:32.385685 (XEN) 32-bit Execution: Jun 30 05:47:32.385715 (XEN) Processor Features: 00001031:00011011 Jun 30 05:47:32.385740 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Jun 30 05:47:32.397685 (XEN) Extensions: GenericTimer Security Jun 30 05:47:32.397717 (XEN) Debug Features: 02010555 Jun 30 05:47:32.397740 (XEN) Auxiliary Features: 00000000 Jun 30 05:47:32.409684 (XEN) Memory Model Features: 10201105 20000000 Jun 30 05:47:32.409717 (XEN) 01240000 02102211 Jun 30 05:47:32.409741 (XEN) ISA Features: 02101110 13112111 21232041 Jun 30 05:47:32.421642 (XEN) 11112131 10011142 00000000 Jun 30 05:47:32.421644 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Jun 30 05:47:32.433693 (XEN) Set SYSRAM to 0000000041000074 (00200074) Jun 30 05:47:32.433725 (XEN) SMP: Allowing 2 CPUs Jun 30 05:47:32.445684 (XEN) enabled workaround for: ARM erratum 766422 Jun 30 05:47:32.445717 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Jun 30 05:47:32.445744 (XEN) GICv2 initialization: Jun 30 05:47:32.457682 (XEN) gic_dist_addr=0000000010481000 Jun 30 05:47:32.457714 (XEN) gic_cpu_addr=0000000010482000 Jun 30 05:47:32.457738 (XEN) gic_hyp_addr=0000000010484000 Jun 30 05:47:32.469684 (XEN) gic_vcpu_addr=0000000010486000 Jun 30 05:47:32.469716 (XEN) gic_maintenance_irq=25 Jun 30 05:47:32.469741 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Jun 30 05:47:32.481681 (XEN) Using scheduler: SMP RTDS Scheduler (rtds) Jun 30 05:47:32.481714 (XEN) Initializing RTDS scheduler Jun 30 05:47:32.481737 (XEN) WARNING: This is experimental software in development. Jun 30 05:47:32.493684 (XEN) Use at your own risk. Jun 30 05:47:32.493715 (XEN) Allocated console ring of 16 KiB. Jun 30 05:47:32.493740 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Jun 30 05:47:32.505688 (XEN) CPU0: Guest atomics will try 1 times before pausing the domain Jun 30 05:47:32.505722 (XEN) Bringing up CPU1 Jun 30 05:47:32.505745 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Jun 30 05:47:32.517643 (XEN) Brought up 2 CPUs Jun 30 05:47:32.517674 (XEN) CPU 1 booted. Jun 30 05:47:32.517696 (XEN) I/O virtualisation disabled Jun 30 05:47:32.517730 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Jun 30 05:47:32.529691 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Jun 30 05:47:32.529725 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Jun 30 05:47:32.541688 (XEN) Initializing RTDS scheduler Jun 30 05:47:32.541720 (XEN) WARNING: This is experimental software in development. Jun 30 05:47:32.541746 (XEN) Use at your own risk. Jun 30 05:47:32.553687 (XEN) common/sched/rt.c:745: RTDS: timer initialized on cpu 0 Jun 30 05:47:32.553722 (XEN) alternatives: Patching with alt table 002c2f84 -> 002c305c Jun 30 05:47:32.565678 (XEN) CPU0 will execute ICIALLU on guest exit Jun 30 05:47:32.565711 (XEN) CPU1 will execute ICIALLU on guest exit Jun 30 05:47:32.565736 (XEN) *** LOADING DOMAIN 0 *** Jun 30 05:47:32.565759 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Jun 30 05:47:32.577682 (XEN) Loading ramdisk from boot module @ 0000000043300000 Jun 30 05:47:32.577714 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Jun 30 05:47:32.589631 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Jun 30 05:47:33.177674 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Jun 30 05:47:33.177708 (XEN) Allocating PPI 16 for event channel interrupt Jun 30 05:47:33.213689 (XEN) d0: extended regions not supported for 32-bit guests Jun 30 05:47:33.213722 (XEN) Loading zImage from 0000000042000000 to 0000000067400000-0000000067e49200 Jun 30 05:47:33.225647 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d946bb Jun 30 05:47:33.321669 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b499 Jun 30 05:47:33.417663 (XEN) Initial low memory virq threshold set at 0x4000 pages. Jun 30 05:47:33.429681 (XEN) Scrubbing Free RAM in background Jun 30 05:47:33.429713 (XEN) Std. Loglevel: All Jun 30 05:47:33.429736 (XEN) Guest Loglevel: All Jun 30 05:47:33.429758 (XEN) *************************************************** Jun 30 05:47:33.441686 (XEN) WARNING: SILO mode is not enabled. Jun 30 05:47:33.441718 (XEN) It has implications on the security of the system, Jun 30 05:47:33.441745 (XEN) unless the communications have been forbidden between Jun 30 05:47:33.453689 (XEN) untrusted domains. Jun 30 05:47:33.453719 (XEN) *************************************************** Jun 30 05:47:33.465622 (XEN) 3... 2... 1... Jun 30 05:47:36.457682 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 30 05:47:36.469668 (XEN) Freed 352kB init memory. Jun 30 05:47:36.469700 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 05:47:37.609621 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Jun 30 05:47:37.621657 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Jun 30 05:47:37.633689 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Jun 30 05:47:37.633723 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Jun 30 05:47:37.645681 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 05:47:37.645715 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 05:47:37.693686 [ 0.000000] Linux version 6.10.0-rc5+ (osstest@himrod0) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Sun Jun 30 01:19:39 UTC 2024 Jun 30 05:47:37.705692 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 30 05:47:37.717681 [ 0.000000] CPU: div instructions available: patching division code Jun 30 05:47:37.717716 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 05:47:37.729686 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 05:47:37.729725 [ 0.000000] Memory policy: Data cache writealloc Jun 30 05:47:37.741683 [ 0.000000] Xen 4.19 support found Jun 30 05:47:37.741715 [ 0.000000] efi: UEFI not found. Jun 30 05:47:37.741740 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 on node -1 Jun 30 05:47:37.753689 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 05:47:37.753735 [ 0.000000] Zone ranges: Jun 30 05:47:37.753760 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Jun 30 05:47:37.765683 [ 0.000000] Normal empty Jun 30 05:47:37.765714 [ 0.000000] HighMem empty Jun 30 05:47:37.765738 [ 0.000000] Movable zone start for each node Jun 30 05:47:37.777683 [ 0.000000] Early memory node ranges Jun 30 05:47:37.777714 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Jun 30 05:47:37.789682 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Jun 30 05:47:37.789717 [ 0.000000] psci: probing for conduit method from DT. Jun 30 05:47:37.801687 [ 0.000000] psci: PSCIv1.1 detected in firmware. Jun 30 05:47:37.801720 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Jun 30 05:47:37.801746 [ 0.000000] psci: Trusted OS migration not required Jun 30 05:47:37.813685 [ 0.000000] psci: SMC Calling Convention v1.2 Jun 30 05:47:37.813717 [ 0.000000] percpu: Embedded 18 pages/cpu s41428 r8192 d24108 u73728 Jun 30 05:47:37.825686 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 05:47:37.837694 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 05:47:37.849694 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Jun 30 05:47:37.861681 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 131072 Jun 30 05:47:37.861716 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Jun 30 05:47:37.873682 [ 0.000000] Memory: 414600K/524288K available (15360K kernel code, 2268K rwdata, 6084K rodata, 2048K init, 439K bss, 44152K reserved, 65536K cma-reserved, 0K highmem) Jun 30 05:47:37.885689 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 05:47:37.885724 [ 0.000000] trace event string verifier disabled Jun 30 05:47:37.897693 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 05:47:37.897725 [ 0.000000] rcu: RCU event tracing is enabled. Jun 30 05:47:37.909681 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Jun 30 05:47:37.909716 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Jun 30 05:47:37.921686 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 05:47:37.921721 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 05:47:37.933689 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 05:47:37.933724 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 05:47:37.945684 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Jun 30 05:47:37.945718 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 05:47:37.957696 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 05:47:37.969692 [ 0.000013] Switching to timer-based delay loop, resolution 41ns Jun 30 05:47:37.981684 [ 0.000522] Console: colour dummy device 80x30 Jun 30 05:47:37.981717 [ 0.000540] printk: legacy console [hvc0] enabled Jun 30 05:47:37.981742 [ 0.299539] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Jun 30 05:47:37.993698 [ 0.309937] CPU: Testing write buffer coherency: ok Jun 30 05:47:38.005683 [ 0.314880] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 05:47:38.005723 [ 0.324432] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 05:47:38.017689 [ 0.330846] pid_max: default: 32768 minimum: 301 Jun 30 05:47:38.017722 [ 0.335639] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 05:47:38.029694 [ 0.342913] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 05:47:38.041687 [ 0.351310] /cpus/cpu@0 missing clock-frequency property Jun 30 05:47:38.041720 [ 0.356127] /cpus/cpu@1 missing clock-frequency property Jun 30 05:47:38.053678 [ 0.361509] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 05:47:38.053713 [ 0.368226] xen:grant_table: Grant tables using version 1 layout Jun 30 05:47:38.053740 [ 0.373367] Grant table initialized Jun 30 05:47:38.065690 [ 0.376916] xen:events: Using FIFO-based ABI Jun 30 05:47:38.065723 [ 0.381219] Xen: initializing cpu0 Jun 30 05:47:38.065747 [ 0.384743] Setting up static identity map for 0x60300000 - 0x603000ac Jun 30 05:47:38.077694 [ 0.392514] rcu: Hierarchical SRCU implementation. Jun 30 05:47:38.077726 [ 0.396137] rcu: Max phase no-delay instances is 1000. Jun 30 05:47:38.089676 [ 0.404371] EFI services will not be available. Jun 30 05:47:38.089709 [ 0.407694] smp: Bringing up secondary CPUs ... Jun 30 05:47:38.101630 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 05:47:38.173686 [ 0.482959] Xen: initializing cpu1 Jun 30 05:47:38.173718 [ 0.483124] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 05:47:38.173744 [ 0.483148] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 05:47:38.185693 [ 0.502095] smp: Brought up 1 node, 2 CPUs Jun 30 05:47:38.197680 [ 0.505768] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 05:47:38.197715 [ 0.512043] CPU: All CPU(s) started in SVC mode. Jun 30 05:47:38.197740 [ 0.517922] devtmpfs: initialized Jun 30 05:47:38.209633 [ 0.530412] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 05:47:38.221710 [ 0.536964] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Jun 30 05:47:38.233690 [ 0.546637] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 05:47:38.245674 [ 0.554542] pinctrl core: initialized pinctrl subsystem Jun 30 05:47:38.245708 [ 0.561209] DMI not present or invalid. Jun 30 05:47:38.245733 [ 0.564720] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 05:47:38.257680 [ 0.571363] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 05:47:38.257716 [ 0.580697] thermal_sys: Registered thermal governor 'step_wise' Jun 30 05:47:38.269678 [ 0.580850] software IO TLB: area num 2. Jun 30 05:47:38.281633 [ 0.589548] software IO TLB: only able to allocate 8 MB Jun 30 05:47:38.281668 [ 0.596612] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Jun 30 05:47:38.293679 [ 0.601810] No ATAGs? Jun 30 05:47:38.293710 [ 0.604130] hw-breakpoint: Failed to enable monitor mode on CPU 0. Jun 30 05:47:38.293737 [ 0.612811] Serial: AMBA PL011 UART driver Jun 30 05:47:38.305624 [ 0.659503] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 65 Jun 30 05:47:38.353638 [ 0.687952] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 30 05:47:38.377666 [ 0.711969] xen:balloon: Initialising balloon driver Jun 30 05:47:38.401676 [ 0.718449] iommu: Default domain type: Translated Jun 30 05:47:38.413675 [ 0.721863] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 05:47:38.413710 [ 0.730667] SCSI subsystem initialized Jun 30 05:47:38.413735 [ 0.733431] usbcore: registered new interface driver usbfs Jun 30 05:47:38.425690 [ 0.738670] usbcore: registered new interface driver hub Jun 30 05:47:38.425723 [ 0.744033] usbcore: registered new device driver usb Jun 30 05:47:38.437694 [ 0.750716] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 05:47:38.437726 [ 0.754304] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 05:47:38.449684 [ 0.760557] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 05:47:38.449735 [ 0.765635] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 05:47:38.461680 [ 0.770569] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 05:47:38.461714 [ 0.776592] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 05:47:38.473687 [ 0.782374] pps_core: LinuxPPS API ver. 1 registered Jun 30 05:47:38.473720 [ 0.786762] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 05:47:38.485686 [ 0.796000] PTP clock support registered Jun 30 05:47:38.485721 [ 0.800229] EDAC MC: Ver: 3.0.0 Jun 30 05:47:38.485759 [ 0.803483] scmi_core: SCMI protocol bus registered Jun 30 05:47:38.497677 [ 0.810187] vgaarb: loaded Jun 30 05:47:38.497708 [ 0.814039] clocksource: Switched to clocksource arch_sys_counter Jun 30 05:47:38.509669 [ 0.831406] NET: Registered PF_INET protocol family Jun 30 05:47:38.521683 [ 0.835076] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Jun 30 05:47:38.533686 [ 0.842952] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 05:47:38.533723 [ 0.850666] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 05:47:38.545693 [ 0.858450] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Jun 30 05:47:38.557687 [ 0.866286] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Jun 30 05:47:38.557722 [ 0.873561] TCP: Hash tables configured (established 4096 bind 4096) Jun 30 05:47:38.569680 [ 0.879936] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 05:47:38.569717 [ 0.886503] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 05:47:38.581679 [ 0.893597] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 05:47:38.581717 [ 0.902114] RPC: Registered named UNIX socket transport module. Jun 30 05:47:38.593693 [ 0.906664] RPC: Registered udp transport module. Jun 30 05:47:38.593725 [ 0.911425] RPC: Registered tcp transport module. Jun 30 05:47:38.605685 [ 0.916213] RPC: Registered tcp-with-tls transport module. Jun 30 05:47:38.605719 [ 0.921754] RPC: Registered tcp NFSv4.1 backchannel transport module. Jun 30 05:47:38.617689 [ 0.928279] PCI: CLS 0 bytes, default 64 Jun 30 05:47:38.617721 [ 0.933683] Initialise system trusted keyrings Jun 30 05:47:38.617747 [ 0.937013] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Jun 30 05:47:38.629690 [ 0.943538] squashfs: version 4.0 (2009/01/31) Phillip Lougher Jun 30 05:47:38.629724 [ 0.949431] Trying to unpack rootfs image as initramfs... Jun 30 05:47:38.641656 [ 0.974463] NFS: Registering the id_resolver key type Jun 30 05:47:38.665680 [ 0.978214] Key type id_resolver registered Jun 30 05:47:38.665712 [ 0.982403] Key type id_legacy registered Jun 30 05:47:38.677692 [ 0.986527] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Jun 30 05:47:38.677727 [ 0.993259] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Jun 30 05:47:38.689628 [ 1.016109] Key type asymmetric registered Jun 30 05:47:38.701654 [ 1.018842] Asymmetric key parser 'x509' registered Jun 30 05:47:38.713685 [ 1.023843] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) Jun 30 05:47:38.713723 [ 1.031278] io scheduler mq-deadline registered Jun 30 05:47:38.725672 [ 1.035879] io scheduler kyber registered Jun 30 05:47:38.725704 [ 1.039971] io scheduler bfq registered Jun 30 05:47:38.725728 [ 1.170559] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 05:47:38.857678 [ 1.176813] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 05:47:38.869675 [ 1.220929] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 05:47:38.917682 [ 1.227177] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 05:47:38.917732 [ 1.271365] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 05:47:38.965688 [ 1.277636] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 05:47:38.977625 [ 1.315474] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 05:47:39.013672 [ 1.321685] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 05:47:39.013712 [ 1.334496] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 05:47:39.025677 [ 1.347349] xen:xen_evtchn: Event-channel device installed Jun 30 05:47:39.037653 [ 1.408431] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 05:47:39.097655 [ 1.419502] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 05:47:39.109689 [ 1.427910] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 05:47:39.121692 [ 1.436754] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 05:47:39.133686 [ 1.445643] SuperH (H)SCI(F) driver initialized Jun 30 05:47:39.133718 [ 1.449917] STMicroelectronics ASC driver initialized Jun 30 05:47:39.145693 [ 1.454892] STM32 USART driver initialized Jun 30 05:47:39.145725 [ 1.460557] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 05:47:39.157638 [ 1.469605] random: crng init done Jun 30 05:47:39.157670 [ 1.479635] brd: module loaded Jun 30 05:47:39.169731 [ 1.486160] loop: module loaded Jun 30 05:47:39.169762 [ 1.502804] Invalid max_queues (4), will use default max: 2. Jun 30 05:47:39.193650 [ 1.521544] tun: Universal TUN/TAP device driver, 1.6 Jun 30 05:47:39.205605 [ 1.525455] CAN device driver interface Jun 30 05:47:39.217669 [ 1.530853] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Jun 30 05:47:39.217703 [ 1.543173] xen_netfront: Initialising Xen virtual ethernet driver Jun 30 05:47:39.229667 [ 1.548095] pegasus: Pegasus/Pegasus II USB Ethernet driver Jun 30 05:47:39.241644 [ 1.553663] usbcore: registered new interface driver pegasus Jun 30 05:47:39.241677 [ 1.559406] usbcore: registered new interface driver asix Jun 30 05:47:39.253691 [ 1.564924] usbcore: registered new interface driver ax88179_178a Jun 30 05:47:39.253726 [ 1.571019] usbcore: registered new interface driver cdc_ether Jun 30 05:47:39.265685 [ 1.576969] usbcore: registered new interface driver smsc75xx Jun 30 05:47:39.265719 [ 1.582757] usbcore: registered new interface driver smsc95xx Jun 30 05:47:39.277684 [ 1.588585] usbcore: registered new interface driver net1080 Jun 30 05:47:39.277717 [ 1.594305] usbcore: registered new interface driver cdc_subset Jun 30 05:47:39.289687 [ 1.600294] usbcore: registered new interface driver zaurus Jun 30 05:47:39.289721 [ 1.605979] usbcore: registered new interface driver cdc_ncm Jun 30 05:47:39.301665 [ 1.615507] usbcore: registered new interface driver usb-storage Jun 30 05:47:39.301721 [ 1.626242] i2c_dev: i2c /dev entries driver Jun 30 05:47:39.313637 [ 1.644987] device-mapper: uevent: version 1.0.3 Jun 30 05:47:39.337679 [ 1.648467] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev Jun 30 05:47:39.337717 [ 1.658272] cpu cpu0: OPP table can't be empty Jun 30 05:47:39.349690 [ 1.662900] failed to register cpuidle driver Jun 30 05:47:39.349722 [ 1.666138] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Jun 30 05:47:39.361685 [ 1.668373] Freeing initrd memory: 11860K Jun 30 05:47:39.361717 [ 1.675161] sdhci: Secure Digital Host Controller Interface driver Jun 30 05:47:39.373671 [ 1.683565] sdhci: Copyright(c) Pierre Ossman Jun 30 05:47:39.373703 [ 1.691700] sdhci-pltfm: SDHCI platform and OF driver helper Jun 30 05:47:39.385638 [ 1.705988] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 05:47:39.397685 [ 1.711420] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Jun 30 05:47:39.397720 [ 1.718120] usbcore: registered new interface driver usbhid Jun 30 05:47:39.409669 [ 1.722771] usbhid: USB HID core driver Jun 30 05:47:39.409700 [ 1.733680] NET: Registered PF_INET6 protocol family Jun 30 05:47:39.421656 [ 1.738858] Segment Routing with IPv6 Jun 30 05:47:39.421687 [ 1.741190] In-situ OAM (IOAM) with IPv6 Jun 30 05:47:39.433687 [ 1.745267] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Jun 30 05:47:39.433721 [ 1.751606] NET: Registered PF_PACKET protocol family Jun 30 05:47:39.445684 [ 1.756282] can: controller area network core Jun 30 05:47:39.445716 [ 1.760709] NET: Registered PF_CAN protocol family Jun 30 05:47:39.457680 [ 1.765580] can: raw protocol Jun 30 05:47:39.457712 [ 1.768580] can: broadcast manager protocol Jun 30 05:47:39.457737 [ 1.772836] can: netlink gateway - max_hops=1 Jun 30 05:47:39.457762 [ 1.777592] Key type dns_resolver registered Jun 30 05:47:39.469666 [ 1.786174] ThumbEE CPU extension supported. Jun 30 05:47:39.469698 [ 1.789076] Registering SWP/SWPB emulation handler Jun 30 05:47:39.481645 [ 1.803499] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level Jun 30 05:47:39.493691 [ 1.811847] Loading compiled-in X.509 certificates Jun 30 05:47:39.505611 [ 1.854278] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 05:47:39.541671 [ 1.857897] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 05:47:39.553681 [ 1.864469] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 05:47:39.553720 [ 1.872638] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 05:47:39.565672 [ 1.920295] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 05:47:39.613657 [ 1.929076] s5m-rtc s5m-rtc: setting system clock to 2000-01-02T00:00:24 UTC (946771224) Jun 30 05:47:39.625666 [ 1.940176] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 05:47:39.625699 [ 1.944891] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 05:47:39.637668 [ 1.949158] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 05:47:39.637702 [ 1.956112] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 05:47:39.649686 [ 1.961962] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 05:47:39.649721 [ 1.968253] clk: Not disabling unused clocks Jun 30 05:47:39.661666 [ 1.971630] PM: genpd: Disabling unused power domains Jun 30 05:47:39.661700 [ 1.980551] Freeing unused kernel image (initmem) memory: 2048K Jun 30 05:47:39.673660 [ 1.986828] Run /init as init process Jun 30 05:47:39.673692 Loading, please wait... Jun 30 05:47:39.697624 Starting systemd-udevd version 252.26-1~deb12u2 Jun 30 05:47:39.769639 [ 3.250254] i2c-gpio i2c-10: using lines 552 (SDA) and 553 (SCL) Jun 30 05:47:40.945632 [ 3.392958] Synopsys Designware Multimedia Card Interface Driver Jun 30 05:47:41.089642 [ 3.407525] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 05:47:41.101628 [ 3.448529] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 05:47:41.137667 [ 3.452776] phy phy-12130000.phy.7: phy_power_on was called before phy_init Jun 30 05:47:41.149692 [ 3.455703] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 05:47:41.161667 [ 3.462473] exynos-ohci 12120000.usb: USB Host Controller Jun 30 05:47:41.161707 [ 3.476837] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Jun 30 05:47:41.173632 [ 3.497040] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 30 05:47:41.185631 [ 3.502922] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 30 05:47:41.197616 [ 3.512241] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 Jun 30 05:47:41.197673 [ 3.520878] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 30 05:47:41.209623 [ 3.527125] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 30 05:47:41.221633 [ 3.534471] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 30 05:47:41.233638 [ 3.542115] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 30 05:47:41.233669 [ 3.548486] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 30 05:47:41.245615 [ 3.554001] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo Jun 30 05:47:41.245650 [ 3.584257] mmc_host mmc0: card is polling. Jun 30 05:47:41.269596 [ 3.586384] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 05:47:41.281568 [ 3.608658] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 05:47:41.305629 [ 3.617010] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 30 05:47:41.305660 [ 3.623296] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 30 05:47:41.317627 [ 3.628926] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 127,32 bit host data width,128 deep fifo Jun 30 05:47:41.329628 [ 3.629039] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 30 05:47:41.329659 [ 3.645464] ahci-dwc 122f0000.sata: AHCI vers 0001.0300, 32 command slots, 6 Gbps, platform mode Jun 30 05:47:41.341629 [ 3.654297] ahci-dwc 122f0000.sata: 1/1 ports implemented (port mask 0x1) Jun 30 05:47:41.341659 [ 3.661133] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 30 05:47:41.353622 [ 3.682967] scsi host0: ahci-dwc Jun 30 05:47:41.365578 [ 3.686828] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 128 lpm-pol 0 Jun 30 05:47:41.377635 [ 3.694859] hub 1-0:1.0: USB hub found Jun 30 05:47:41.389623 [ 3.698617] hub 1-0:1.0: 3 ports detected Jun 30 05:47:41.389650 [ 3.702279] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 05:47:41.401605 [ 3.716534] phy phy-12130000.phy.7: phy_power_on was called before phy_init Jun 30 05:47:41.413627 [ 3.723325] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 05:47:41.413656 [ 3.730036] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Jun 30 05:47:41.425577 [ 3.811943] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 Jun 30 05:47:41.501681 [ 3.813544] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 30 05:47:41.513687 [ 3.828867] mmc0: new DDR MMC card at address 0001 Jun 30 05:47:41.513720 [ 3.833781] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Jun 30 05:47:41.525665 [ 3.841381] mmcblk0: p1 p2 p3 p4 Jun 30 05:47:41.525696 [ 3.845747] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 05:47:41.537672 [ 3.854428] VDD_ALIVE_1.0V: Bringing 1000000uV into 1100000-1100000uV Jun 30 05:47:41.549656 [ 3.856073] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Jun 30 05:47:41.549689 [ 3.874153] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Jun 30 05:47:41.561667 [ 3.875574] hub 2-0:1.0: USB hub found Jun 30 05:47:41.573668 [ 3.881640] hub 2-0:1.0: 3 ports detected Jun 30 05:47:41.573701 [ 3.885793] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Jun 30 05:47:41.573728 [ 3.903954] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Jun 30 05:47:41.597656 [ 3.908553] s3c-rtc 101e0000.rtc: registered as rtc1 Jun 30 05:47:41.597689 [ 3.987925] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 05:47:41.681686 [ 3.996751] mmc1: new high speed SDHC card at address aaaa Jun 30 05:47:41.693649 [ 4.003231] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Jun 30 05:47:41.693682 [ 4.194251] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 30 05:47:41.885694 [ 4.200613] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 30 05:47:41.897672 [ 4.206056] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 30 05:47:41.897707 [ 4.215231] ata1.00: configured for UDMA/133 Jun 30 05:47:41.909675 [ 4.218466] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 30 05:47:41.909713 [ 4.228562] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 30 05:47:41.921696 [ 4.234709] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 30 05:47:41.921729 [ 4.240720] sd 0:0:0:0: [sda] Write Protect is off Jun 30 05:47:41.933686 [ 4.245606] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 30 05:47:41.945652 [ 4.256241] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 30 05:47:41.945687 [ 4.284079] sda: sda1 sda2 < sda5 > Jun 30 05:47:41.969648 [ 4.288723] sd 0:0:0:0: [sda] Attached SCSI disk Jun 30 05:47:41.981627 [ 4.525080] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Jun 30 05:47:42.221677 [ 4.533423] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 05:47:42.221711 [ 4.537630] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 05:47:42.233686 [ 4.547937] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002000010 Jun 30 05:47:42.245705 [ 4.556341] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Jun 30 05:47:42.245738 [ 4.562449] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 05:47:42.257685 [ 4.567699] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 05:47:42.257723 [ 4.575433] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 05:47:42.269689 [ 4.583057] hub 3-0:1.0: USB hub found Jun 30 05:47:42.269721 [ 4.585952] hub 3-0:1.0: 1 port detected Jun 30 05:47:42.281656 [ 4.591011] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 05:47:42.281695 [ 4.606767] hub 4-0:1.0: USB hub found Jun 30 05:47:42.293666 [ 4.609810] hub 4-0:1.0: 1 port detected Jun 30 05:47:42.293698 [ 4.924168] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 05:47:42.617658 [ 5.093221] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 05:47:42.785674 [ 5.231142] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 05:47:42.929616 [ 5.340775] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 05:47:43.037652 [ 5.462551] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 05:47:43.157652 [ 5.634995] I/O error, dev mmcblk1, sector 7743714 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 Jun 30 05:47:43.325683 [ 5.939412] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 05:47:43.637624 [ 6.113565] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 05:47:43.805690 [ 6.227947] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 05:47:43.925646 [ 6.335694] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 05:47:44.033617 [ 6.456723] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 05:47:44.153678 [ 6.464355] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 05:47:44.153715 Begin: Loading essential drivers ... done. Jun 30 05:47:44.201589 Begin: Running /scripts/init-premount ... done. Jun 30 05:47:47.216739 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 30 05:47:47.228500 Begin: Running /scripts/local-premount ... done. Jun 30 05:47:47.240492 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 30 05:47:47.312559 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 30 05:47:47.420502 /dev/mapper/arndale--metrocentre--vg-root: recovering journal Jun 30 05:47:47.664579 /dev/mapper/arndale--metrocentre--vg-root: clean, 46077/1220608 files, 606060/4882432 blocks Jun 30 05:47:48.664528 done. Jun 30 05:47:48.676549 [ 10.990449] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 30 05:47:48.688537 [ 11.325237] EXT4-fs (dm-0): mounted filesystem 0470b348-50c0-4378-b138-d692a92f6d85 ro with ordered data mode. Quota mode: disabled. Jun 30 05:47:49.024556 done. Jun 30 05:47:49.024556 Begin: Running /scripts/local-bottom ... done. Jun 30 05:47:49.072558 Begin: Running /scripts/init-bottom ... done. Jun 30 05:47:49.120524 INIT: version 3.06 booting Jun 30 05:47:49.616487 INIT: No inittab.d directory found Jun 30 05:47:49.676493 Using makefile-style concurrent boot in runlevel S. Jun 30 05:47:50.000600 Starting hotplug events dispatcher: systemd-udevd. Jun 30 05:47:51.648552 Synthesizing the initial hotplug events (subsystems)...done. Jun 30 05:47:52.120553 Synthesizing the initial hotplug events (devices)...[ 14.749971] wm8994 3-001a: Device is not a WM8994, ID is 0 Jun 30 05:47:52.444577 [ 14.757359] wm8994 3-001a: probe with driver wm8994 failed with error -22 Jun 30 05:47:52.456685 done. Jun 30 05:47:52.984534 Waiting for /dev to be fully populated...[ 15.383789] s5p-secss 10830000.sss: s5p-sss driver registered Jun 30 05:47:53.080535 [ 15.410242] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 30 05:47:53.104561 [ 15.454191] mc: Linux media interface: v0.10 Jun 30 05:47:53.140687 [ 15.551196] videodev: Linux video capture interface: v2.00 Jun 30 05:47:53.248689 [ 15.769170] s5p-mfc 11000000.codec: Adding to iommu group 0 Jun 30 05:47:53.464714 [ 15.807147] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Jun 30 05:47:53.500739 [ 15.838767] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 05:47:53.536768 [ 15.847846] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 05:47:53.548755 [ 15.855305] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 05:47:53.560718 [ 15.874832] s5p-mfc 11000000.codec: decoder registered as /dev/video0 Jun 30 05:47:53.572755 [ 15.880309] s5p-mfc 11000000.codec: encoder registered as /dev/video1 Jun 30 05:47:53.572819 [ 15.975405] exynos-gsc 13e00000.gsc: Adding to iommu group 1 Jun 30 05:47:53.668760 [ 15.981868] exynos-gsc 13e10000.gsc: Adding to iommu group 2 Jun 30 05:47:53.680697 [ 16.006039] exynos-gsc 13e20000.gsc: Adding to iommu group 3 Jun 30 05:47:53.704555 [ 16.015818] exynos-gsc 13e30000.gsc: Adding to iommu group 4 Jun 30 05:47:53.704555 [ 16.022323] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 05:47:53.716586 [ 16.144159] usb3503 usb-hub: switched to HUB mode Jun 30 05:47:53.836581 [ 16.147530] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 05:47:53.836581 [ 16.193839] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 05:47:53.896530 [ 16.360274] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 05:47:54.052694 [ 16.493521] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 05:47:54.188485 [ 16.524797] usb 2-3: new high-speed USB device number 2 using exynos-ehci Jun 30 05:47:54.224470 [ 16.614607] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 05:47:54.306375 [ 16.631176] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Jun 30 05:47:54.332514 [ 16.766693] hub 2-3:1.0: USB hub found Jun 30 05:47:54.452539 [ 16.771318] hub 2-3:1.0: 3 ports detected Jun 30 05:47:54.464535 [ 16.843277] I/O error, dev mmcblk1, sector 7743714 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 Jun 30 05:47:54.536591 [ 16.951833] I/O error, dev mmcblk1, sector 7743715 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 Jun 30 05:47:54.644573 [ 17.036256] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 05:47:54.728706 [ 17.044072] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 05:47:54.740589 [ 17.052649] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 05:47:54.752579 [ 17.066365] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 05:47:54.764590 [ 17.074034] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 05:47:54.776590 [ 17.082784] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 05:47:54.776590 [ 17.104191] usb 2-3.2: new high-speed USB device number 3 using exynos-ehci Jun 30 05:47:54.800673 [ 17.256862] hub 2-3.2:1.0: USB hub found Jun 30 05:47:54.944538 [ 17.259810] hub 2-3.2:1.0: 4 ports detected Jun 30 05:47:54.956527 [ 17.376867] usbcore: registered new device driver onboard-usb-dev Jun 30 05:47:55.064555 [ 17.440433] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 05:47:55.136560 [ 17.504885] hub 2-3.2:1.0: USB hub found Jun 30 05:47:55.196569 [ 17.507803] hub 2-3.2:1.0: 4 ports detected Jun 30 05:47:55.196569 [ 17.519976] hub 2-3.2:1.0: USB hub found Jun 30 05:47:55.208559 [ 17.522977] hub 2-3.2:1.0: 4 ports detected Jun 30 05:47:55.220630 [ 17.614119] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 05:47:55.316519 [ 17.722706] I/O error, dev mmcblk1, sector 7744000 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 05:47:55.424565 [ 17.734061] usb 2-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 30 05:47:55.424565 [ 17.830919] I/O error, dev mmcblk1, sector 7744001 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 05:47:55.532531 [ 17.888198] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 30 05:47:55.580571 [ 17.939139] I/O error, dev mmcblk1, sector 7744002 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 05:47:55.640521 [ 18.047361] I/O error, dev mmcblk1, sector 7744003 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 05:47:55.748525 [ 18.155574] I/O error, dev mmcblk1, sector 7744004 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 05:47:55.856503 [ 18.558202] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 05:47:56.252555 [ 18.573072] Asix Electronics AX88772A usb-002:004:10: attached PHY driver (mii_bus:phy_addr=usb-002:004:10, irq=POLL) Jun 30 05:47:56.276730 [ 18.582926] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, fe:cf:7d:f2:c9:a9 Jun 30 05:47:56.288518 [ 20.777859] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 05:47:58.480706 [ 20.954504] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 05:47:58.648597 [ 21.463549] blk_print_req_error: 27 callbacks suppressed Jun 30 05:47:59.156690 [ 21.463558] I/O error, dev mmcblk1, sector 7744004 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 05:47:59.168629 [ 21.576680] I/O error, dev mmcblk1, sector 7744005 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 05:47:59.276779 [ 21.684427] I/O error, dev mmcblk1, sector 7744006 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 05:47:59.384568 [ 21.792128] I/O error, dev mmcblk1, sector 7744007 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 05:47:59.492590 [ 21.799758] Buffer I/O error on dev mmcblk1, logical block 968000, async page read Jun 30 05:47:59.492659 done. Jun 30 05:47:59.504724 [ 22.206446] EXT4-fs (dm-0): re-mounted 0470b348-50c0-4378-b138-d692a92f6d85 r/w. Quota mode: disabled. Jun 30 05:47:59.900596 Checking file systems.../dev/sda1: recovering journal Jun 30 05:48:01.437371 /dev/sda1: clean, 2179/61056 files, 44464/243968 blocks Jun 30 05:48:01.508570 done. Jun 30 05:48:01.556561 Cleaning up temporary files... /tmp. Jun 30 05:48:01.716565 [ 24.241003] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 30 05:48:01.936590 [ 24.292898] EXT4-fs (sda1): mounted filesystem 46eda51d-cd67-4ed5-a5ad-cb77e619fb7a r/w with ordered data mode. Quota mode: disabled. Jun 30 05:48:01.996704 [ 24.393264] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k Jun 30 05:48:02.092581 Mounting local filesystems...done. Jun 30 05:48:02.332598 Activating swapfile swap, if any...done. Jun 30 05:48:02.332598 Cleaning up temporary files.... Jun 30 05:48:02.380569 Starting Setting kernel variables: sysctl. Jun 30 05:48:02.560576 [ 26.217997] xenbr0: port 1(eth0) entered blocking state Jun 30 05:48:03.908599 [ 26.221858] xenbr0: port 1(eth0) entered disabled state Jun 30 05:48:03.923104 [ 26.227221] asix 2-3.2.4:1.0 eth0: entered allmulticast mode Jun 30 05:48:03.923227 [ 26.233024] asix 2-3.2.4:1.0 eth0: entered promiscuous mode Jun 30 05:48:03.932596 [ 26.243821] asix 2-3.2.4:1.0 eth0: configuring for phy/internal link mode Jun 30 05:48:03.932596 Configuring network interfaces...RTNETLINK answers: Operation not supported Jun 30 05:48:05.804606 Jun 30 05:48:05.804606 Waiting for xenbr0 to get ready (MAXWAIT is 2 seconds). Jun 30 05:48:05.816555 [ 28.421950] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 30 05:48:06.120626 [ 28.428013] xenbr0: port 1(eth0) entered blocking state Jun 30 05:48:06.120626 [ 28.433191] xenbr0: port 1(eth0) entered forwarding state Jun 30 05:48:06.132551 done. Jun 30 05:48:06.324556 Cleaning up temporary files.... Jun 30 05:48:06.408560 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Jun 30 05:48:06.456702 Starting nftables: none Jun 30 05:48:06.564559 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Jun 30 05:48:06.660608 failed! Jun 30 05:48:06.660608 startpar: service(s) returned failure: nftables ... failed! Jun 30 05:48:06.660608 INIT: Entering runlevel: 2 Jun 30 05:48:06.684573 Using makefile-style concurrent boot in runlevel 2. Jun 30 05:48:06.696576 Starting Apache httpd web server: apache2AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.149.64.44. Set the 'ServerName' directive globally to suppress this message Jun 30 05:48:07.516611 . Jun 30 05:48:08.600534 Starting NTP server: ntpd2000-01-02T00:00:53 ntpd[1139]: INIT: ntpd ntpsec-1.2.2: Starting Jun 30 05:48:09.152728 2000-01-02T00:00:53 ntpd[1139]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 30 05:48:09.164575 . Jun 30 05:48:09.164575 Starting system message bus: dbus. Jun 30 05:48:09.540720 Starting SMP IRQ Balancer: irqbalance. Jun 30 05:48:09.648720 Starting OpenBSD Secure Shell server: sshd. Jun 30 05:48:10.344768 Starting /usr/local/sbin/oxenstored... Jun 30 05:48:12.860789 Setting domain 0 name, domid and JSON config... Jun 30 05:48:12.860851 Done setting up Dom0 Jun 30 05:48:12.860894 Starting xenconsoled... Jun 30 05:48:12.872762 Starting QEMU as disk backend for dom0 Jun 30 05:48:12.872849 Jun 30 05:48:13.944575 Debian GNU/Linux 12 arndale-metrocentre hvc0 Jun 30 05:48:13.956601 Jun 30 05:48:13.956652 arndale-metrocentre login: [ 111.991215] sd 0:0:0:0: [sda] Synchronizing SCSI cache Jun 30 05:49:29.685860 [ 112.000470] wake enabled for irq 119 (gpx1-4) Jun 30 05:49:29.685935 [ 112.003468] wake enabled for irq 120 (gpx1-5) Jun 30 05:49:29.697796 [ 112.007962] wake enabled for irq 121 (gpx1-6) Jun 30 05:49:29.697856 [ 112.012323] wake enabled for irq 122 (gpx1-7) Jun 30 05:49:29.709800 [ 112.016797] wake enabled for irq 123 (gpx2-0) Jun 30 05:49:29.709861 [ 112.021178] wake enabled for irq 124 (gpx2-1) Jun 30 05:49:29.709909 [ 112.025988] reboot: Resô Jun 30 05:49:30.045695 Jun 30 05:49:30.045718 Jun 30 05:49:30.045784 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 05:49:30.057807 Jun 30 05:49:30.057860 CPU: Exynos5250@1000MHz Jun 30 05:49:30.057904 Jun 30 05:49:30.057942 Board: Arndale Jun 30 05:49:30.057982 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 05:49:30.069682 ready Jun 30 05:49:30.069712 DRAM: 2 GiB Jun 30 05:49:30.069734 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 05:49:30.081771 trace: enabled Jun 30 05:49:30.117727 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 05:49:30.477746 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 05:49:30.537821 In: serial Jun 30 05:49:30.537866 Out: serial Jun 30 05:49:30.537907 Err: serial Jun 30 05:49:30.537946 SCSI: ARNDALE SCSI INIT Jun 30 05:49:30.549769 Target spinup took 0 ms. Jun 30 05:49:30.549826 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 05:49:30.561795 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 05:49:30.561857 Net: Net Initialization Skipped Jun 30 05:49:30.561902 No ethernet found. Jun 30 05:49:30.561943 Hostname: arndale-metrocentre Jun 30 05:49:30.573749 Hit any key to stop autoboot: 2  1  0 Jun 30 05:49:32.493788 (Re)start USB... Jun 30 05:49:32.493850 USB0: USB EHCI 1.00 Jun 30 05:49:32.493896 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 05:49:38.097855 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 05:49:38.118978 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 05:49:38.541791 Waiting for Ethernet connection... done. Jun 30 05:49:40.149695 BOOTP broadcast 1 Jun 30 05:49:40.149757 BOOTP broadcast 2 Jun 30 05:49:41.989716 DHCP client bound to address 10.149.64.44 (1926 ms) Jun 30 05:49:42.001769 Using asx0 device Jun 30 05:49:42.001769 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 05:49:42.001858 Filename 'pxelinux.0'. Jun 30 05:49:42.001921 Load address: 0x43e00000 Jun 30 05:49:42.013634 Loading: *### Jun 30 05:49:42.025691 2.2 MiB/s Jun 30 05:49:42.025691 done Jun 30 05:49:42.025691 Bytes transferred = 42430 (a5be hex) Jun 30 05:49:42.025691 missing environment variable: pxeuuid Jun 30 05:49:42.037767 Retrieving file: pxelinux.cfg/0A95402C Jun 30 05:49:42.037831 Using asx0 device Jun 30 05:49:42.037873 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 05:49:42.049733 Filename 'pxelinux.cfg/0A95402C'. Jun 30 05:49:42.049791 Load address: 0x51000000 Jun 30 05:49:42.049835 Loading: *# Jun 30 05:49:42.049875 358.4 KiB/s Jun 30 05:49:42.049915 done Jun 30 05:49:42.049954 Bytes transferred = 734 (2de hex) Jun 30 05:49:42.061789 Config file found Jun 30 05:49:42.061844 Ignoring unknown command: serial Jun 30 05:49:42.061889 1: ^Overwrite Jun 30 05:49:42.061929 Retrieving file: /osstest/tmp//arndale-metrocentre--initrd.gz Jun 30 05:49:42.073742 Using asx0 device Jun 30 05:49:42.073797 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 05:49:42.073847 Filename '/osstest/tmp//arndale-metrocentre--initrd.gz'. Jun 30 05:49:42.085712 Load address: 0x43300000 Jun 30 05:49:42.085768 Loading: *################################################################# Jun 30 05:49:42.409707 ################################################################# Jun 30 05:49:42.745668 ################################################################# Jun 30 05:49:43.069645 ################################################################# Jun 30 05:49:43.381693 ################################################################# Jun 30 05:49:43.693680 ################################################################# Jun 30 05:49:44.017671 ################################################################# Jun 30 05:49:44.341678 ################################################################# Jun 30 05:49:44.665673 ################################################################# Jun 30 05:49:44.989681 ################################################################# Jun 30 05:49:45.277676 ################################################################# Jun 30 05:49:45.577684 ################################################################# Jun 30 05:49:45.877683 ################################################################# Jun 30 05:49:46.177684 ################################################################# Jun 30 05:49:46.445690 ################################################################# Jun 30 05:49:46.733673 ################################################################# Jun 30 05:49:46.985624 ################################################################# Jun 30 05:49:47.285601 ################################################################# Jun 30 05:49:47.585676 ################################################################# Jun 30 05:49:47.885662 ################################################################# Jun 30 05:49:48.189690 ################################################################# Jun 30 05:49:48.489686 ################################################################# Jun 30 05:49:48.825701 ################################################################# Jun 30 05:49:49.149679 ################################################################# Jun 30 05:49:49.473663 ################################################################# Jun 30 05:49:49.797685 ################################################################# Jun 30 05:49:50.121604 ################################################################# Jun 30 05:49:50.421685 ###################################### Jun 30 05:49:50.601677 2.8 MiB/s Jun 30 05:49:50.601707 done Jun 30 05:49:50.601728 Bytes transferred = 26310347 (19176cb hex) Jun 30 05:49:50.601753 Retrieving file: /osstest/debian-installer/armhf/2024-03-26-bookworm/linux Jun 30 05:49:50.613801 Using asx0 device Jun 30 05:49:50.613858 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 05:49:50.625759 Filename '/osstest/debian-installer/armhf/2024-03-26-bookworm/linux'. Jun 30 05:49:50.625822 Load address: 0x42000000 Jun 30 05:49:50.625864 Loading: *################################################################# Jun 30 05:49:50.961672 ################################################################# Jun 30 05:49:51.285700 ################################################################# Jun 30 05:49:51.609685 ################################################################# Jun 30 05:49:51.933669 ################################################################# Jun 30 05:49:52.257675 ############################################# Jun 30 05:49:52.485609 2.7 MiB/s Jun 30 05:49:52.485638 done Jun 30 05:49:52.485660 Bytes transferred = 5423616 (52c200 hex) Jun 30 05:49:52.497746 append: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-metrocentre url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=53403 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-metrocentre--initrd.gz --- console=ttySAC2,115200n8 Jun 30 05:49:52.533798 Retrieving file: /osstest/debian-installer/armhf/2024-03-26-bookworm/dtbs/exynos5250-arndale.dtb Jun 30 05:49:52.545765 Using asx0 device Jun 30 05:49:52.545818 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 05:49:52.545866 Filename '/osstest/debian-installer/armhf/2024-03-26-bookworm/dtbs/exynos5250-arndale.dtb'. Jun 30 05:49:52.557759 Load address: 0x43000000 Jun 30 05:49:52.557813 Loading: *#### Jun 30 05:49:52.581747 2.5 MiB/s Jun 30 05:49:52.581801 done Jun 30 05:49:52.581840 Bytes transferred = 46686 (b65e hex) Jun 30 05:49:52.581883 Kernel image @ 0x42000000 [ 0x000000 - 0x52c200 ] Jun 30 05:49:52.581928 ## Flattened Device Tree blob at 43000000 Jun 30 05:49:52.593736 Booting using the fdt blob at 0x43000000 Jun 30 05:49:52.593793 Loading Ramdisk to 4e6e8000, end 4ffff6cb ... OK Jun 30 05:49:53.013686 Loading Device Tree to 4e6d9000, end 4e6e765d ... OK Jun 30 05:49:53.025711 Jun 30 05:49:53.025761 Starting kernel ...(fake run for tracing) Jun 30 05:49:53.037696 Jun 30 05:49:53.037746 Jun 30 05:49:53.037784 Starting kernel ... Jun 30 05:49:53.037825 Jun 30 05:49:53.037861 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 05:49:59.145782 [ 0.000000] Linux version 6.1.0-18-armmp (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.76-1 (2024-02-01) Jun 30 05:49:59.157764 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 30 05:49:59.169688 [ 0.000000] CPU: div instructions available: patching division code Jun 30 05:49:59.169722 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 05:49:59.181748 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 05:49:59.193759 [ 0.000000] Memory policy: Data cache writealloc Jun 30 05:49:59.193818 [ 0.000000] efi: UEFI not found. Jun 30 05:49:59.193862 [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 Jun 30 05:49:59.205746 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 05:49:59.205804 [ 0.000000] Zone ranges: Jun 30 05:49:59.205846 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Jun 30 05:49:59.217739 [ 0.000000] Normal empty Jun 30 05:49:59.217784 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Jun 30 05:49:59.217810 [ 0.000000] Movable zone start for each node Jun 30 05:49:59.229784 [ 0.000000] Early memory node ranges Jun 30 05:49:59.229842 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 05:49:59.241739 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 05:49:59.241803 [ 0.000000] percpu: Embedded 18 pages/cpu s41620 r8192 d23916 u73728 Jun 30 05:49:59.253742 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Jun 30 05:49:59.253806 [ 0.000000] Kernel command line: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-metrocentre url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=53403 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-metrocentre--initrd.gz --- console=ttySAC2,115200n8 Jun 30 05:49:59.301766 [ 0.000000] Unknown kernel command line parameters "preseed --- vga=normal auto=true hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=53403 domain=test-lab.xenproject.org", will be passed to user space. Jun 30 05:49:59.337819 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Jun 30 05:49:59.349808 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 05:49:59.349879 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Jun 30 05:49:59.361751 [ 0.000000] Memory: 2015996K/2097152K available (11264K kernel code, 1696K rwdata, 3716K rodata, 2048K init, 378K bss, 64772K reserved, 16384K cma-reserved, 1294332K highmem) Jun 30 05:49:59.373801 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 05:49:59.385693 [ 0.000000] ftrace: allocating 39582 entries in 117 pages Jun 30 05:49:59.385693 [ 0.000000] ftrace: allocated 116 pages with 4 groups Jun 30 05:49:59.397751 [ 0.000000] trace event string verifier disabled Jun 30 05:49:59.397823 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 05:49:59.397849 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Jun 30 05:49:59.409814 [ 0.000000] Rude variant of Tasks RCU enabled. Jun 30 05:49:59.409875 [ 0.000000] Tracing variant of Tasks RCU enabled. Jun 30 05:49:59.421764 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Jun 30 05:49:59.421831 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 05:49:59.433733 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 05:49:59.433733 [ 0.000000] GIC: Using split EOI/Deactivate mode Jun 30 05:49:59.445768 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 05:49:59.445836 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 05:49:59.457762 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Jun 30 05:49:59.457824 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Jun 30 05:49:59.469783 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Jun 30 05:49:59.481763 [ 0.000019] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Jun 30 05:49:59.481831 [ 0.002637] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Jun 30 05:49:59.493762 [ 0.002651] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 05:49:59.505761 [ 0.002665] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 05:49:59.517743 [ 0.002677] Ignoring duplicate/late registration of read_current_timer delay Jun 30 05:49:59.517807 [ 0.003045] Console: colour dummy device 80x30 Jun 30 05:49:59.517864 [ 0.003086] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Jun 30 05:49:59.529773 [ 0.003099] CPU: Testing write buffer coherency: ok Jun 30 05:49:59.541782 [ 0.003140] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 05:49:59.553776 [ 0.003147] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 05:49:59.553842 [ 0.003154] pid_max: default: 32768 minimum: 301 Jun 30 05:49:59.553890 [ 0.003511] LSM: Security Framework initializing Jun 30 05:49:59.565758 [ 0.003582] landlock: Up and running. Jun 30 05:49:59.565816 [ 0.003587] Yama: disabled by default; enable with sysctl kernel.yama.* Jun 30 05:49:59.577737 [ 0.003776] AppArmor: AppArmor initialized Jun 30 05:49:59.577796 [ 0.003787] TOMOYO Linux initialized Jun 30 05:49:59.577840 [ 0.003830] LSM support for eBPF active Jun 30 05:49:59.589754 [ 0.004074] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 05:49:59.589822 [ 0.004088] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 05:49:59.601755 [ 0.005521] /cpus/cpu@0 missing clock-frequency property Jun 30 05:49:59.601815 [ 0.005548] /cpus/cpu@1 missing clock-frequency property Jun 30 05:49:59.613793 [ 0.005560] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 05:49:59.613878 [ 0.006522] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 05:49:59.625785 [ 0.006529] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 05:49:59.625846 [ 0.006632] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 05:49:59.637722 [ 0.006638] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 05:49:59.637722 [ 0.006787] Setting up static identity map for 0x40300000 - 0x403000ac Jun 30 05:49:59.649775 [ 0.007957] rcu: Hierarchical SRCU implementation. Jun 30 05:49:59.649840 [ 0.007963] rcu: Max phase no-delay instances is 1000. Jun 30 05:49:59.661715 [ 0.010106] EFI services will not be available. Jun 30 05:49:59.661715 [ 0.010457] smp: Bringing up secondary CPUs ... Jun 30 05:49:59.673778 [ 0.011199] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 05:49:59.673845 [ 0.011211] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 05:49:59.685764 [ 0.011340] smp: Brought up 1 node, 2 CPUs Jun 30 05:49:59.685822 [ 0.011349] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 05:49:59.697740 [ 0.011357] CPU: All CPU(s) started in HYP mode. Jun 30 05:49:59.697800 [ 0.011360] CPU: Virtualization extensions available. Jun 30 05:49:59.697848 [ 0.012020] devtmpfs: initialized Jun 30 05:49:59.709759 [ 0.023087] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 05:49:59.709828 [ 0.023339] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Jun 30 05:49:59.721761 [ 0.023363] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 05:49:59.733747 [ 0.023849] pinctrl core: initialized pinctrl subsystem Jun 30 05:49:59.733808 [ 0.024579] DMI not present or invalid. Jun 30 05:49:59.745753 [ 0.025257] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 05:49:59.745816 [ 0.030644] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 05:49:59.757754 [ 0.032211] audit: initializing netlink subsys (disabled) Jun 30 05:49:59.757815 [ 0.032411] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 Jun 30 05:49:59.769774 [ 0.033585] thermal_sys: Registered thermal governor 'fair_share' Jun 30 05:49:59.769836 [ 0.033593] thermal_sys: Registered thermal governor 'bang_bang' Jun 30 05:49:59.781768 [ 0.033598] thermal_sys: Registered thermal governor 'step_wise' Jun 30 05:49:59.781831 [ 0.033602] thermal_sys: Registered thermal governor 'user_space' Jun 30 05:49:59.793793 [ 0.033607] thermal_sys: Registered thermal governor 'power_allocator' Jun 30 05:49:59.855218 [ 0.033973] No ATAGs? Jun 30 05:49:59.855266 [ 0.034041] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jun 30 05:49:59.855266 [ 0.034050] hw-breakpoint: maximum watchpoint size is 8 bytes. Jun 30 05:49:59.855266 [ 0.035142] Serial: AMBA PL011 UART driver Jun 30 05:49:59.855266 [ 0.091472] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Jun 30 05:49:59.855266 [ 0.102465] iommu: Default domain type: Translated Jun 30 05:49:59.855266 [ 0.102473] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 05:49:59.855266 [ 0.103455] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Jun 30 05:49:59.855266 [ 0.104020] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 05:49:59.855266 [ 0.104032] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 05:49:59.855266 [ 0.104674] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 05:49:59.865791 [ 0.104705] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 05:49:59.865853 [ 0.104886] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 05:49:59.877747 [ 0.105241] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 05:49:59.877807 [ 0.105250] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 05:49:59.889774 [ 0.105645] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 05:49:59.889836 [ 0.105935] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 05:49:59.901737 [ 0.105945] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 05:49:59.901800 [ 0.106222] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 05:49:59.913760 [ 0.106322] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 05:49:59.913820 [ 0.106331] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 05:49:59.913869 [ 0.106528] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 05:49:59.925992 [ 0.106728] pps_core: LinuxPPS API ver. 1 registered Jun 30 05:49:59.926049 [ 0.106733] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 05:49:59.941623 [ 0.106749] PTP clock support registered Jun 30 05:49:59.941623 [ 0.108238] NetLabel: Initializing Jun 30 05:49:59.941623 [ 0.108244] NetLabel: domain hash size = 128 Jun 30 05:49:59.953607 [ 0.108249] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Jun 30 05:49:59.953800 [ 0.108320] NetLabel: unlabeled traffic allowed by default Jun 30 05:49:59.965668 [ 0.108479] vgaarb: loaded Jun 30 05:49:59.965668 [ 0.109150] clocksource: Switched to clocksource mct-frc Jun 30 05:49:59.965668 [ 0.178059] VFS: Disk quotas dquot_6.6.0 Jun 30 05:49:59.977550 [ 0.178160] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jun 30 05:49:59.977550 [ 0.178902] AppArmor: AppArmor Filesystem Enabled Jun 30 05:49:59.989650 [ 0.187966] NET: Registered PF_INET protocol family Jun 30 05:49:59.989650 [ 0.188173] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Jun 30 05:50:00.001620 [ 0.189808] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 05:50:00.001620 [ 0.189898] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 05:50:00.013687 [ 0.189922] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Jun 30 05:50:00.025675 [ 0.190017] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Jun 30 05:50:00.025675 [ 0.190246] TCP: Hash tables configured (established 8192 bind 8192) Jun 30 05:50:00.037699 [ 0.190468] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Jun 30 05:50:00.037699 [ 0.190554] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 05:50:00.049567 [ 0.190594] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 05:50:00.049567 [ 0.190794] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 05:50:00.061544 [ 0.190827] NET: Registered PF_XDP protocol family Jun 30 05:50:00.061544 [ 0.190837] PCI: CLS 0 bytes, default 64 Jun 30 05:50:00.073607 [ 0.191348] Trying to unpack rootfs image as initramfs... Jun 30 05:50:00.073607 [ 0.191765] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Jun 30 05:50:00.085519 [ 0.191971] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Jun 30 05:50:00.085519 [ 0.193594] Initialise system trusted keyrings Jun 30 05:50:00.097516 [ 0.193660] Key type blacklist registered Jun 30 05:50:00.097516 [ 0.193885] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Jun 30 05:50:00.110007 [ 0.201079] zbud: loaded Jun 30 05:50:00.110065 [ 0.202178] integrity: Platform Keyring initialized Jun 30 05:50:00.110123 [ 0.202208] integrity: Machine keyring initialized Jun 30 05:50:00.121988 [ 0.202216] Key type asymmetric registered Jun 30 05:50:00.122060 [ 0.202223] Asymmetric key parser 'x509' registered Jun 30 05:50:00.122107 [ 1.562348] Freeing initrd memory: 25696K Jun 30 05:50:00.133750 [ 1.574220] alg: self-tests for CTR-KDF (hmac(sha256)) passed Jun 30 05:50:00.133812 [ 1.574505] bounce: pool size: 64 pages Jun 30 05:50:00.145749 [ 1.574667] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Jun 30 05:50:00.145847 [ 1.574828] io scheduler mq-deadline registered Jun 30 05:50:00.161552 [ 1.579994] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Jun 30 05:50:00.161552 [ 1.600858] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 05:50:00.173655 [ 1.600870] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 05:50:00.173655 [ 1.603207] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 05:50:00.185776 [ 1.603217] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 05:50:00.197742 [ 1.604009] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 05:50:00.197810 [ 1.604018] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 05:50:00.209684 [ 1.604843] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 05:50:00.221774 [ 1.604852] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 05:50:00.221845 [ 1.607255] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 05:50:00.233761 [ 1.610071] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 05:50:00.245750 [ 1.612777] Serial: AMBA driver Jun 30 05:50:00.245807 [ 1.613024] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 05:50:00.257755 [ 1.613586] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 05:50:00.257825 [ 1.614040] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 05:50:00.269779 [ 2.744932] printk: console [ttySAC2] enabled Jun 30 05:50:00.281744 [ 2.749749] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Jun 30 05:50:00.281816 [ 2.760419] STM32 USART driver initialized Jun 30 05:50:00.293696 [ 2.774587] mousedev: PS/2 mouse device common for all mice Jun 30 05:50:00.305718 [ 2.805752] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 05:50:00.341759 [ 2.814356] s5m-rtc s5m-rtc: setting system clock to 2000-01-02T00:02:40 UTC (946771360) Jun 30 05:50:00.353749 [ 2.824175] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Jun 30 05:50:00.353813 [ 2.831650] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 05:50:00.365753 [ 2.839633] NET: Registered PF_INET6 protocol family Jun 30 05:50:00.365813 [ 2.853485] Segment Routing with IPv6 Jun 30 05:50:00.377728 [ 2.855722] In-situ OAM (IOAM) with IPv6 Jun 30 05:50:00.389755 [ 2.859682] mip6: Mobile IPv6 Jun 30 05:50:00.389812 [ 2.862587] NET: Registered PF_PACKET protocol family Jun 30 05:50:00.389860 [ 2.867744] mpls_gso: MPLS GSO support Jun 30 05:50:00.401759 [ 2.871927] ThumbEE CPU extension supported. Jun 30 05:50:00.401818 [ 2.875603] Registering SWP/SWPB emulation handler Jun 30 05:50:00.413724 [ 2.880828] registered taskstats version 1 Jun 30 05:50:00.413784 [ 2.884482] Loading compiled-in X.509 certificates Jun 30 05:50:00.413831 [ 3.340976] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Jun 30 05:50:00.881767 [ 3.348340] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Jun 30 05:50:00.881843 [ 3.359358] zswap: loaded using pool lzo/zbud Jun 30 05:50:00.893759 [ 3.363367] Key type .fscrypt registered Jun 30 05:50:00.893817 [ 3.366654] Key type fscrypt-provisioning registered Jun 30 05:50:00.893864 [ 3.380489] Key type encrypted registered Jun 30 05:50:00.905715 [ 3.383086] AppArmor: AppArmor sha1 policy hashing enabled Jun 30 05:50:00.917768 [ 3.388541] ima: No TPM chip found, activating TPM-bypass! Jun 30 05:50:00.917830 [ 3.394004] ima: Allocated hash algorithm: sha256 Jun 30 05:50:00.929786 [ 3.398725] ima: No architecture policies found Jun 30 05:50:00.929847 [ 3.403237] evm: Initialising EVM extended attributes: Jun 30 05:50:00.941742 [ 3.408310] evm: security.selinux Jun 30 05:50:00.941800 [ 3.411598] evm: security.SMACK64 (disabled) Jun 30 05:50:00.941847 [ 3.415849] evm: security.SMACK64EXEC (disabled) Jun 30 05:50:00.953741 [ 3.420451] evm: security.SMACK64TRANSMUTE (disabled) Jun 30 05:50:00.953803 [ 3.425485] evm: security.SMACK64MMAP (disabled) Jun 30 05:50:00.953850 [ 3.430083] evm: security.apparmor Jun 30 05:50:00.965681 [ 3.433469] evm: security.ima Jun 30 05:50:00.965681 [ 3.436406] evm: security.capability Jun 30 05:50:00.965681 [ 3.439986] evm: HMAC attrs: 0x1 Jun 30 05:50:00.965681 [ 4.023712] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 05:50:01.553734 [ 4.050125] Freeing unused kernel image (initmem) memory: 2048K Jun 30 05:50:01.577731 [ 4.054991] Checked W+X mappings: passed, no W+X pages found Jun 30 05:50:01.589787 [ 4.060249] Run /init as init process Jun 30 05:50:01.589845 [ 4.634467] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 05:50:02.165733 [ 4.680036] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 05:50:02.213774 [ 4.688487] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 05:50:02.225776 [ 4.695487] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 05:50:02.225845 [ 4.713113] usbcore: registered new interface driver usbfs Jun 30 05:50:02.249679 [ 4.730705] usbcore: registered new interface driver hub Jun 30 05:50:02.261686 [ 4.752241] usbcore: registered new device driver usb Jun 30 05:50:02.285596 [ 4.768554] phy phy-12130000.phy.3: phy_power_on was called before phy_init Jun 30 05:50:02.297686 [ 4.775355] phy phy-12130000.phy.3: phy_power_on was called before phy_init Jun 30 05:50:02.309731 [ 4.781048] exynos-ohci 12120000.usb: USB Host Controller Jun 30 05:50:02.309793 [ 4.799890] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 05:50:02.333746 [ 4.804304] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 05:50:02.333808 [ 4.809936] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Jun 30 05:50:02.345738 [ 4.820543] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Jun 30 05:50:02.357690 [ 4.844962] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Jun 30 05:50:02.381739 [ 4.852923] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Jun 30 05:50:02.381802 [ 4.893246] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 05:50:02.429745 [ 4.898140] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 05:50:02.429816 [ 4.906117] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 05:50:02.441745 [ 4.909383] usb3503 usb-hub: switched to HUB mode Jun 30 05:50:02.441805 [ 4.913268] usb usb2: Product: EHCI Host Controller Jun 30 05:50:02.453757 [ 4.917948] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 05:50:02.453820 [ 4.928622] usb usb2: Manufacturer: Linux 6.1.0-18-armmp ehci_hcd Jun 30 05:50:02.465718 [ 4.934701] usb usb2: SerialNumber: 12110000.usb Jun 30 05:50:02.465779 [ 4.948813] hub 2-0:1.0: USB hub found Jun 30 05:50:02.477714 [ 4.954121] hub 2-0:1.0: 3 ports detected Jun 30 05:50:02.489735 [ 4.959640] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Jun 30 05:50:02.489807 [ 4.966496] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 05:50:02.501770 [ 4.973663] usb usb1: Product: USB Host Controller Jun 30 05:50:02.501830 [ 4.978436] usb usb1: Manufacturer: Linux 6.1.0-18-armmp ohci_hcd Jun 30 05:50:02.513727 [ 4.984523] usb usb1: SerialNumber: 12120000.usb Jun 30 05:50:02.513787 [ 4.992597] hub 1-0:1.0: USB hub found Jun 30 05:50:02.525737 [ 4.997714] hub 1-0:1.0: 3 ports detected Jun 30 05:50:02.525797 [ 5.237191] usb 2-3: new high-speed USB device number 2 using exynos-ehci Jun 30 05:50:02.765725 [ 5.297337] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 05:50:02.825847 [ 5.301388] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 05:50:02.837867 [ 5.309522] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 Jun 30 05:50:02.849843 [ 5.321364] xhci-hcd xhci-hcd.2.auto: irq 108, io mem 0x12000000 Jun 30 05:50:02.849906 [ 5.326151] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 05:50:02.861848 [ 5.331426] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 05:50:02.861916 [ 5.339058] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 05:50:02.873829 [ 5.345766] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 05:50:02.885712 [ 5.353819] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 05:50:02.885749 [ 5.361014] usb usb3: Product: xHCI Host Controller Jun 30 05:50:02.897876 [ 5.365871] usb usb3: Manufacturer: Linux 6.1.0-18-armmp xhci-hcd Jun 30 05:50:02.897947 [ 5.371948] usb usb3: SerialNumber: xhci-hcd.2.auto Jun 30 05:50:02.909772 [ 5.378000] hub 3-0:1.0: USB hub found Jun 30 05:50:02.909817 [ 5.380550] hub 3-0:1.0: 1 port detected Jun 30 05:50:02.909842 [ 5.385571] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 05:50:02.921723 [ 5.392647] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Jun 30 05:50:02.933717 [ 5.400765] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 05:50:02.933754 [ 5.407979] usb usb4: Product: xHCI Host Controller Jun 30 05:50:02.945720 [ 5.412830] usb usb4: Manufacturer: Linux 6.1.0-18-armmp xhci-hcd Jun 30 05:50:02.945754 [ 5.413581] usb 2-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Jun 30 05:50:02.957718 [ 5.418911] usb usb4: SerialNumber: xhci-hcd.2.auto Jun 30 05:50:02.957751 [ 5.427082] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jun 30 05:50:02.969717 [ 5.433500] hub 4-0:1.0: USB hub found Jun 30 05:50:02.969749 [ 5.442866] hub 4-0:1.0: 1 port detected Jun 30 05:50:02.969773 [ 5.443295] hub 2-3:1.0: USB hub found Jun 30 05:50:02.981680 [ 5.450702] hub 2-3:1.0: 3 ports detected Jun 30 05:50:02.981712 Starting system log daemon: syslogd, klogd. Jun 30 05:50:03.125643 /var/run/utmp: No such file or directory Jun 30 05:50:04.973874 [?1h=(B   Jun 30 05:50:05.009797  Jun 30 05:50:05.021857 [  (-*) ][ Jan 02  0:02 ] Jun 30 05:50:05.033854 [  (0*start) ][ Jan 02  0:02 ] Jun 30 05:50:05.045858 [  (0*start) ][ Jan 02  0:02 ] Jun 30 05:50:05.057852 [  (0*start) ][ Jan 02  0:02 ] Jun 30 05:50:05.069850 [  (0*start) ][ Jan 02  0:02 ]                        [  (0*start) ][ Jan 02  0:02 ][  (0*start) ][ Jan 02  0:02 ] Jun 30 05:50:05.129899 [ 0- start  (2*shell) ][ Jan 02  0:02 ] Jun 30 05:50:05.141858 [ 0- start  (2*shell) ][ Jan 02  0:02 ] Jun 30 05:50:05.153852 [ 0- start  (2*shell) ][ Jan 02  0:02 ] Jun 30 05:50:05.177824 [ 0- start  (2*shell) ][ Jan 02  0:02 ]                        [ 0- start  (2*shell) ][ Jan 02  0:02 ][ 0- start  (2*shell) ][ Jan 02  0:02 ] Jun 30 05:50:05.225861 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:02 ] Jun 30 05:50:05.237843 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:02 ] Jun 30 05:50:05.261843 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:02 ] Jun 30 05:50:05.273840 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:02 ]                        [ 0 start 2- shell  (3*shell) ][ Jan 02  0:02 ][ 0 start 2- shell  (3*shell) ][ Jan 02  0:02 ] Jun 30 05:50:05.321862 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:02 ] Jun 30 05:50:05.345834 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:02 ] Jun 30 05:50:05.357845 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:02 ] Jun 30 05:50:05.369842 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:02 ]                        [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:02 ][ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:02 ] Jun 30 05:50:05.429830 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:02 ] Jun 30 05:50:05.441869 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:02 ] Jun 30 05:50:05.453835 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:02 ] Jun 30 05:50:05.465841 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:02 ]                        [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:02 ][ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:02 ] Jun 30 05:50:05.525844 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:02 ] Jun 30 05:50:05.537843 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:02 ] Jun 30 05:50:05.549791 [  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:02 ] Jun 30 05:50:06.005799 Detecting network hardware ... 2%... 95%... 100% Jun 30 05:50:07.757693 Detecting link on eth0; please wait... ... 0%... 10%... 20% Jun 30 05:50:12.649711 Waiting for link-local address... ... 8%... 16%... 25%... 33%... 41%... 50%... 100% Jun 30 05:50:14.453707 Attempting IPv6 autoconfiguration... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 75%... 83%[  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:03 ]... 91%... 100% Jun 30 05:50:20.521733 Configuring the network with DHCP ... 0%... 100% Jun 30 05:50:23.681731 Checking the Debian archive mirror ... 25%... 50%... 75%... 100% Jun 30 05:50:31.940547 Loading additional components ... 0%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Jun 30 05:51:05.937663 Setting up the clock ... 0%... 3%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  5:51 ]... 100% Jun 30 05:51:08.757705 Loading additional components ... 50%... 100% Jun 30 05:51:10.445635 Detecting disks and all other hardware ... 2%... 95%... 100% Jun 30 05:51:17.181648 Loading additional components ... 5%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Jun 30 05:51:26.072470 Loading additional components ... 25%... 50%... 75%... 100% Jun 30 05:51:28.469633 Starting up the partitioner ... 4%... 13%... 21%... 30%... 43%... 52%... 60%... 73%... 82%... 91%... 100% Jun 30 05:51:43.016386 Guided partitioning ... 16%... 33%... 50%... 66%... 83%... 100% Jun 30 05:51:51.485721 Starting up the partitioner ... 4%... 12%... 20%... 32%... 40%... 52%... 60%... 72%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  5:52 ]... 80%... 92%... 100% Jun 30 05:52:05.241699 Partitions formatting ... 33% Jun 30 05:52:16.637631 Partitions formatting Partitions formatting Installing the base system ... 0%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  5:53 ]... 17%... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  5:54 ]... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  5:55 ]... 48%... 50%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  5:56 ]...  Jun 30 05:56:17.756592  60%... 70%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  5:57 ]... 79%... 83%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  5:58 ][  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  5:59 ]... 91%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  6:00 ]... 100% Jun 30 06:00:46.657643 Configuring apt ... 7%... 14%... 14%... 21%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  6:01 ]... 35%... 42%... 50%... 60%... 71%. Jun 30 06:01:24.217739 ... 82%... 92%... 100% Jun 30 06:01:26.845696 Select and install software ... 1%... 10%... 13%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  6:02 ]... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  6:03 ]... 40%... 50%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  6:04 ]... Jun 30 06:04:15.341679 . 60%... 70%... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  6:05 ]... 88%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  6:06 ]... 90%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  6:07 ]... 94%... 100% Jun 30 06:07:22.713713 Finishing the installation ... 4%... 12%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  6:08 ][  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  6:09 ]... 16%... 20%... 32%... 40%... 44%... Jun 30 06:09:09.925764  52%... 60%... 72%... 80%... 92% The system is going down NOW! Jun 30 06:09:19.969731 Sent SIGTERM Sent SIGKILL to all processes Jun 30 06:09:20.965737 Requesting system reboot Jun 30 06:09:20.977705 [ 1164.479882] reboot: Reó Jun 30 06:09:22.325687 Jun 30 06:09:22.325716 Jun 30 06:09:22.325786 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 06:09:22.337760 Jun 30 06:09:22.337812 CPU: Exynos5250@1000MHz Jun 30 06:09:22.337856 Jun 30 06:09:22.337894 Board: Arndale Jun 30 06:09:22.337935 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 06:09:22.349704 ready Jun 30 06:09:22.349757 DRAM: 2 GiB Jun 30 06:09:22.349799 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 06:09:22.361724 trace: enabled Jun 30 06:09:22.397658 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 06:09:22.757750 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 06:09:22.817743 In: serial Jun 30 06:09:22.817798 Out: serial Jun 30 06:09:22.817839 Err: serial Jun 30 06:09:22.829754 SCSI: ARNDALE SCSI INIT Jun 30 06:09:22.829847 Target spinup took 0 ms. Jun 30 06:09:22.829894 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 06:09:22.841723 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 06:09:22.841784 Net: Net Initialization Skipped Jun 30 06:09:22.841828 No ethernet found. Jun 30 06:09:22.853707 Hostname: arndale-metrocentre Jun 30 06:09:22.853764 Hit any key to stop autoboot: 2  1  0 Jun 30 06:09:24.773742 (Re)start USB... Jun 30 06:09:24.773819 USB0: USB EHCI 1.00 Jun 30 06:09:24.785691 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 06:09:30.381787 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 06:09:30.381872 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 06:09:30.825750 Waiting for Ethernet connection... done. Jun 30 06:09:32.421719 BOOTP broadcast 1 Jun 30 06:09:32.433625 BOOTP broadcast 2 Jun 30 06:09:33.849753 DHCP client bound to address 10.149.64.44 (1483 ms) Jun 30 06:09:33.850497 Using asx0 device Jun 30 06:09:33.850535 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 06:09:33.864506 Filename 'pxelinux.0'. Jun 30 06:09:33.864506 Load address: 0x43e00000 Jun 30 06:09:33.864506 Loading: *### Jun 30 06:09:33.876433 2.4 MiB/s Jun 30 06:09:33.876433 done Jun 30 06:09:33.888456 Bytes transferred = 42430 (a5be hex) Jun 30 06:09:33.888456 missing environment variable: pxeuuid Jun 30 06:09:33.888456 Retrieving file: pxelinux.cfg/0A95402C Jun 30 06:09:33.888456 Using asx0 device Jun 30 06:09:33.888456 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 06:09:33.900490 Filename 'pxelinux.cfg/0A95402C'. Jun 30 06:09:33.900490 Load address: 0x51000000 Jun 30 06:09:33.900490 Loading: *# Jun 30 06:09:33.912487 31.3 KiB/s Jun 30 06:09:33.912487 done Jun 30 06:09:33.912487 Bytes transferred = 65 (41 hex) Jun 30 06:09:33.912487 Config file found Jun 30 06:09:33.912487 Ignoring unknown command: serial Jun 30 06:09:33.912487 1: local Jun 30 06:09:33.912487 scanning bus for devices... Jun 30 06:09:33.924395 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 06:09:33.948510 Type: Hard Disk Jun 30 06:09:33.948510 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 06:09:33.948510 Found 1 device(s). Jun 30 06:09:33.948510 Jun 30 06:09:33.948510 SCSI device 0: Jun 30 06:09:33.960499 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 06:09:33.960499 Type: Hard Disk Jun 30 06:09:33.960499 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 06:09:33.972473 ... is now current device Jun 30 06:09:33.972473 Scanning scsi 0... Jun 30 06:09:33.972473 Found U-Boot script /boot.scr Jun 30 06:09:34.092396 641 bytes read in 38 ms (15.6 KiB/s) Jun 30 06:09:34.128449 ## Executing script at 50000000 Jun 30 06:09:34.140443 Loading dtbs/exynos5250-arndale.dtb Jun 30 06:09:34.140443 46686 bytes read in 1307 ms (34.2 KiB/s) Jun 30 06:09:35.412457 Loading vmlinuz-6.1.0-22-armmp-lpae Jun 30 06:09:35.424497 5505536 bytes read in 188 ms (27.9 MiB/s) Jun 30 06:09:35.628448 Loading initrd.img-6.1.0-22-armmp-lpae Jun 30 06:09:35.628448 25720794 bytes read in 1917 ms (12.8 MiB/s) Jun 30 06:09:37.492491 Booting Jun 30 06:09:37.492491 Kernel image @ 0x42000000 [ 0x000000 - 0x540200 ] Jun 30 06:09:37.492491 ## Flattened Device Tree blob at 43000000 Jun 30 06:09:37.504443 Booting using the fdt blob at 0x43000000 Jun 30 06:09:37.504443 Loading Ramdisk to 4e778000, end 4ffff7da ... OK Jun 30 06:09:37.924540 Loading Device Tree to 4e769000, end 4e77765d ... OK Jun 30 06:09:37.924540 Jun 30 06:09:37.936563 Starting kernel ...(fake run for tracing) Jun 30 06:09:37.936563 Jun 30 06:09:37.936563 Jun 30 06:09:37.936563 Starting kernel ... Jun 30 06:09:37.936563 Jun 30 06:09:37.936563 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 06:09:44.085703 [ 0.000000] Linux version 6.1.0-22-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.94-1 (2024-06-21) Jun 30 06:09:44.109744 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=30c5387d Jun 30 06:09:44.109825 [ 0.000000] CPU: div instructions available: patching division code Jun 30 06:09:44.121744 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 06:09:44.121824 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 06:09:44.133703 [ 0.000000] Memory policy: Data cache writealloc Jun 30 06:09:44.133740 [ 0.000000] efi: UEFI not found. Jun 30 06:09:44.145750 [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000 Jun 30 06:09:44.145750 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 06:09:44.145836 [ 0.000000] Zone ranges: Jun 30 06:09:44.157715 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Jun 30 06:09:44.157751 [ 0.000000] Normal empty Jun 30 06:09:44.157751 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Jun 30 06:09:44.169698 [ 0.000000] Movable zone start for each node Jun 30 06:09:44.169741 [ 0.000000] Early memory node ranges Jun 30 06:09:44.169741 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 06:09:44.181712 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 06:09:44.193690 [ 0.000000] percpu: Embedded 18 pages/cpu s44756 r8192 d20780 u73728 Jun 30 06:09:44.193726 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Jun 30 06:09:44.205711 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=ttySAC2,115200n8 Jun 30 06:09:44.217722 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Jun 30 06:09:44.217756 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 06:09:44.229699 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Jun 30 06:09:44.229742 [ 0.000000] Memory: 2015520K/2097152K available (12288K kernel code, 1714K rwdata, 3748K rodata, 2048K init, 382K bss, 65248K reserved, 16384K cma-reserved, 1294332K highmem) Jun 30 06:09:44.253784 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 06:09:44.253851 [ 0.000000] ftrace: allocating 39982 entries in 118 pages Jun 30 06:09:44.265717 [ 0.000000] ftrace: allocated 118 pages with 5 groups Jun 30 06:09:44.265717 [ 0.000000] trace event string verifier disabled Jun 30 06:09:44.265717 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 06:09:44.277778 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Jun 30 06:09:44.277846 [ 0.000000] Rude variant of Tasks RCU enabled. Jun 30 06:09:44.289760 [ 0.000000] Tracing variant of Tasks RCU enabled. Jun 30 06:09:44.289819 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Jun 30 06:09:44.301756 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 06:09:44.301818 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 06:09:44.313720 [ 0.000000] GIC: Using split EOI/Deactivate mode Jun 30 06:09:44.313780 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 06:09:44.325776 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 06:09:44.325838 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Jun 30 06:09:44.337754 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Jun 30 06:09:44.349746 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Jun 30 06:09:44.349815 [ 0.000019] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Jun 30 06:09:44.361665 [ 0.002641] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Jun 30 06:09:44.361699 [ 0.002655] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 06:09:44.373685 [ 0.002670] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 06:09:44.385767 [ 0.002682] Ignoring duplicate/late registration of read_current_timer delay Jun 30 06:09:44.385830 [ 0.003048] Console: colour dummy device 80x30 Jun 30 06:09:44.397747 [ 0.003087] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Jun 30 06:09:44.409761 [ 0.003101] CPU: Testing write buffer coherency: ok Jun 30 06:09:44.409821 [ 0.003142] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 06:09:44.421664 [ 0.003150] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 06:09:44.421664 [ 0.003157] pid_max: default: 32768 minimum: 301 Jun 30 06:09:44.433792 [ 0.003515] LSM: Security Framework initializing Jun 30 06:09:44.433856 [ 0.003587] landlock: Up and running. Jun 30 06:09:44.433901 [ 0.003591] Yama: disabled by default; enable with sysctl kernel.yama.* Jun 30 06:09:44.445757 [ 0.003778] AppArmor: AppArmor initialized Jun 30 06:09:44.445816 [ 0.003790] TOMOYO Linux initialized Jun 30 06:09:44.457744 [ 0.003837] LSM support for eBPF active Jun 30 06:09:44.457802 [ 0.004081] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 06:09:44.469758 [ 0.004095] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 06:09:44.469825 [ 0.005505] /cpus/cpu@0 missing clock-frequency property Jun 30 06:09:44.481751 [ 0.005534] /cpus/cpu@1 missing clock-frequency property Jun 30 06:09:44.481812 [ 0.005546] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 06:09:44.493755 [ 0.006495] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 06:09:44.493823 [ 0.006502] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 06:09:44.505745 [ 0.006605] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 06:09:44.505813 [ 0.006611] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 06:09:44.517751 [ 0.006750] Setting up static identity map for 0x40400000 - 0x404000ac Jun 30 06:09:44.517814 [ 0.007913] rcu: Hierarchical SRCU implementation. Jun 30 06:09:44.529738 [ 0.007919] rcu: Max phase no-delay instances is 1000. Jun 30 06:09:44.529799 [ 0.010052] EFI services will not be available. Jun 30 06:09:44.541748 [ 0.010394] smp: Bringing up secondary CPUs ... Jun 30 06:09:44.541808 [ 0.011135] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 06:09:44.541857 [ 0.011147] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 06:09:44.553771 [ 0.011275] smp: Brought up 1 node, 2 CPUs Jun 30 06:09:44.565750 [ 0.011284] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 06:09:44.565815 [ 0.011291] CPU: All CPU(s) started in HYP mode. Jun 30 06:09:44.565862 [ 0.011295] CPU: Virtualization extensions available. Jun 30 06:09:44.577758 [ 0.012167] devtmpfs: initialized Jun 30 06:09:44.577815 [ 0.022978] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 06:09:44.589757 [ 0.023210] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Jun 30 06:09:44.601737 [ 0.023234] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 06:09:44.601801 [ 0.023771] pinctrl core: initialized pinctrl subsystem Jun 30 06:09:44.613750 [ 0.024522] DMI not present or invalid. Jun 30 06:09:44.613809 [ 0.025200] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 06:09:44.613859 [ 0.026741] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 06:09:44.625763 [ 0.028226] audit: initializing netlink subsys (disabled) Jun 30 06:09:44.625824 [ 0.028427] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 Jun 30 06:09:44.637794 [ 0.029606] thermal_sys: Registered thermal governor 'fair_share' Jun 30 06:09:44.649725 [ 0.029613] thermal_sys: Registered thermal governor 'bang_bang' Jun 30 06:09:44.649788 [ 0.029618] thermal_sys: Registered thermal governor 'step_wise' Jun 30 06:09:44.661744 [ 0.029622] thermal_sys: Registered thermal governor 'user_space' Jun 30 06:09:44.661807 [ 0.029627] thermal_sys: Registered thermal governor 'power_allocator' Jun 30 06:09:44.673756 [ 0.029823] No ATAGs? Jun 30 06:09:44.673812 [ 0.029890] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jun 30 06:09:44.673869 [ 0.029898] hw-breakpoint: maximum watchpoint size is 8 bytes. Jun 30 06:09:44.685748 [ 0.030983] Serial: AMBA PL011 UART driver Jun 30 06:09:44.685807 [ 0.080529] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 30 06:09:44.697792 [ 0.087420] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Jun 30 06:09:44.709833 [ 0.091806] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages Jun 30 06:09:44.709833 [ 0.091814] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page Jun 30 06:09:44.721716 [ 0.098780] iommu: Default domain type: Translated Jun 30 06:09:44.721719 [ 0.098788] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 06:09:44.733707 [ 0.099775] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Jun 30 06:09:44.733710 [ 0.100313] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 06:09:44.745711 [ 0.100324] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 06:09:44.745735 [ 0.100828] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 06:09:44.757685 [ 0.100858] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 06:09:44.769768 [ 0.101064] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 06:09:44.769768 [ 0.101425] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 06:09:44.769768 [ 0.101435] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 06:09:44.781739 [ 0.101826] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 06:09:44.781739 [ 0.102117] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 06:09:44.793758 [ 0.102126] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 06:09:44.793758 [ 0.102415] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 06:09:44.805702 [ 0.102515] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 06:09:44.805745 [ 0.102524] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 06:09:44.817715 [ 0.102703] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 06:09:44.817715 [ 0.102917] pps_core: LinuxPPS API ver. 1 registered Jun 30 06:09:44.817793 [ 0.102923] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 06:09:44.829716 [ 0.102938] PTP clock support registered Jun 30 06:09:44.829740 [ 0.104541] NetLabel: Initializing Jun 30 06:09:44.841754 [ 0.104546] NetLabel: domain hash size = 128 Jun 30 06:09:44.841754 [ 0.104551] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Jun 30 06:09:44.853741 [ 0.104606] NetLabel: unlabeled traffic allowed by default Jun 30 06:09:44.853741 [ 0.104782] vgaarb: loaded Jun 30 06:09:44.853823 [ 0.105647] clocksource: Switched to clocksource mct-frc Jun 30 06:09:44.865741 [ 0.106242] VFS: Disk quotas dquot_6.6.0 Jun 30 06:09:44.865741 [ 0.106327] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jun 30 06:09:44.877748 [ 0.107089] AppArmor: AppArmor Filesystem Enabled Jun 30 06:09:44.877748 [ 0.117044] NET: Registered PF_INET protocol family Jun 30 06:09:44.877831 [ 0.117244] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Jun 30 06:09:44.889718 [ 0.118693] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 06:09:44.901749 [ 0.118792] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 06:09:44.901749 [ 0.118818] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Jun 30 06:09:44.913734 [ 0.118919] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Jun 30 06:09:44.925699 [ 0.119149] TCP: Hash tables configured (established 8192 bind 8192) Jun 30 06:09:44.925741 [ 0.119398] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Jun 30 06:09:44.937766 [ 0.119490] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 06:09:44.937829 [ 0.119530] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 06:09:44.949752 [ 0.119757] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 06:09:44.949815 [ 0.119793] NET: Registered PF_XDP protocol family Jun 30 06:09:44.961749 [ 0.119804] PCI: CLS 0 bytes, default 64 Jun 30 06:09:44.961807 [ 0.120293] Trying to unpack rootfs image as initramfs... Jun 30 06:09:44.973742 [ 0.120652] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Jun 30 06:09:44.973811 [ 0.126067] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Jun 30 06:09:44.985765 [ 0.190754] Initialise system trusted keyrings Jun 30 06:09:44.985824 [ 0.190821] Key type blacklist registered Jun 30 06:09:44.997742 [ 0.192039] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Jun 30 06:09:44.997806 [ 0.199962] zbud: loaded Jun 30 06:09:44.997850 [ 0.201884] integrity: Platform Keyring initialized Jun 30 06:09:45.009752 [ 0.201935] integrity: Machine keyring initialized Jun 30 06:09:45.009812 [ 0.201944] Key type asymmetric registered Jun 30 06:09:45.009858 [ 0.201952] Asymmetric key parser 'x509' registered Jun 30 06:09:45.021760 [ 1.423918] Freeing initrd memory: 25120K Jun 30 06:09:45.021818 [ 1.446175] alg: self-tests for CTR-KDF (hmac(sha256)) passed Jun 30 06:09:45.033772 [ 1.446444] bounce: pool size: 64 pages Jun 30 06:09:45.033831 [ 1.446637] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Jun 30 06:09:45.045749 [ 1.446804] io scheduler mq-deadline registered Jun 30 06:09:45.045808 [ 1.451917] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Jun 30 06:09:45.057733 [ 1.472969] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 06:09:45.057733 [ 1.472982] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 06:09:45.069766 [ 1.475310] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 06:09:45.081761 [ 1.475320] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 06:09:45.081833 [ 1.476128] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 06:09:45.093741 [ 1.476137] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 06:09:45.105756 [ 1.476951] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 06:09:45.105823 [ 1.476959] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 06:09:45.117807 [ 1.479342] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 06:09:45.129797 [ 1.482165] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 06:09:45.141754 [ 1.484903] Serial: AMBA driver Jun 30 06:09:45.141811 [ 1.485125] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 06:09:45.153737 [ 1.485602] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 06:09:45.153809 [ 1.486106] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 06:09:45.165757 [ 2.566921] printk: console [ttySAC2] enabled Jun 30 06:09:45.165836 [ 2.571755] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Jun 30 06:09:45.177754 [ 2.582413] STM32 USART driver initialized Jun 30 06:09:45.189673 [ 2.596804] mousedev: PS/2 mouse device common for all mice Jun 30 06:09:45.201705 [ 2.628044] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 06:09:45.225712 [ 2.636673] s5m-rtc s5m-rtc: setting system clock to 2024-06-30T06:09:45 UTC (1719727785) Jun 30 06:09:45.237751 [ 2.646539] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Jun 30 06:09:45.249739 [ 2.654031] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 06:09:45.261706 [ 2.662026] NET: Registered PF_INET6 protocol family Jun 30 06:09:45.261767 [ 2.685979] Segment Routing with IPv6 Jun 30 06:09:45.285733 [ 2.688225] In-situ OAM (IOAM) with IPv6 Jun 30 06:09:45.285792 [ 2.692215] mip6: Mobile IPv6 Jun 30 06:09:45.297745 [ 2.695069] NET: Registered PF_PACKET protocol family Jun 30 06:09:45.297806 [ 2.700234] mpls_gso: MPLS GSO support Jun 30 06:09:45.297852 [ 2.704239] ThumbEE CPU extension supported. Jun 30 06:09:45.309745 [ 2.708105] Registering SWP/SWPB emulation handler Jun 30 06:09:45.309805 [ 2.713331] registered taskstats version 1 Jun 30 06:09:45.321780 [ 2.716978] Loading compiled-in X.509 certificates Jun 30 06:09:45.321842 [ 3.177676] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Jun 30 06:09:45.777832 [ 3.185013] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Jun 30 06:09:45.789842 [ 3.196085] zswap: loaded using pool lzo/zbud Jun 30 06:09:45.801853 [ 3.200030] Key type .fscrypt registered Jun 30 06:09:45.801912 [ 3.203329] Key type fscrypt-provisioning registered Jun 30 06:09:45.801960 [ 3.227670] Key type encrypted registered Jun 30 06:09:45.825800 [ 3.230261] AppArmor: AppArmor sha1 policy hashing enabled Jun 30 06:09:45.837821 [ 3.235751] ima: No TPM chip found, activating TPM-bypass! Jun 30 06:09:45.837883 [ 3.241196] ima: Allocated hash algorithm: sha256 Jun 30 06:09:45.849816 [ 3.245901] ima: No architecture policies found Jun 30 06:09:45.849876 [ 3.250416] evm: Initialising EVM extended attributes: Jun 30 06:09:45.849924 [ 3.255487] evm: security.selinux Jun 30 06:09:45.861831 [ 3.258775] evm: security.SMACK64 (disabled) Jun 30 06:09:45.861891 [ 3.263031] evm: security.SMACK64EXEC (disabled) Jun 30 06:09:45.861938 [ 3.267632] evm: security.SMACK64TRANSMUTE (disabled) Jun 30 06:09:45.873825 [ 3.272664] evm: security.SMACK64MMAP (disabled) Jun 30 06:09:45.873885 [ 3.277265] evm: security.apparmor Jun 30 06:09:45.873930 [ 3.280649] evm: security.ima Jun 30 06:09:45.885804 [ 3.283600] evm: security.capability Jun 30 06:09:45.885862 [ 3.287166] evm: HMAC attrs: 0x1 Jun 30 06:09:45.885907 [ 3.876696] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 06:09:46.485785 [ 3.882659] clk: Disabling unused clocks Jun 30 06:09:46.485853 [ 3.895628] Freeing unused kernel image (initmem) memory: 2048K Jun 30 06:09:46.497818 [ 3.900495] Checked W+X mappings: passed, no W+X pages found Jun 30 06:09:46.509782 [ 3.905744] Run /init as init process Jun 30 06:09:46.509841 Loading, please wait... Jun 30 06:09:46.533774 Starting systemd-udevd version 252.26-1~deb12u2 Jun 30 06:09:46.617767 [ 4.823480] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 06:09:47.425826 [ 4.838875] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 06:09:47.449750 [ 4.860008] usbcore: registered new interface driver usbfs Jun 30 06:09:47.461701 [ 4.865732] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 06:09:47.473704 [ 4.873927] usbcore: registered new interface driver hub Jun 30 06:09:47.473739 [ 4.882048] usbcore: registered new device driver usb Jun 30 06:09:47.485693 [ 4.885932] Synopsys Designware Multimedia Card Interface Driver Jun 30 06:09:47.485735 [ 4.923510] phy phy-12130000.phy.2: phy_power_on was called before phy_init Jun 30 06:09:47.533695 [ 4.932985] phy phy-12130000.phy.2: phy_power_on was called before phy_init Jun 30 06:09:47.533719 [ 4.939851] SCSI subsystem initialized Jun 30 06:09:47.545700 [ 4.942285] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 06:09:47.545742 [ 4.947761] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Jun 30 06:09:47.557658 [ 4.991874] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 30 06:09:47.593703 [ 4.991971] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 30 06:09:47.605714 [ 5.005224] exynos-ohci 12120000.usb: USB Host Controller Jun 30 06:09:47.605749 [ 5.009622] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 30 06:09:47.617696 [ 5.015969] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 30 06:09:47.617722 [ 5.033311] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Jun 30 06:09:47.641689 [ 5.043222] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 30 06:09:47.641731 [ 5.048276] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 30 06:09:47.653702 [ 5.048713] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 06:09:47.653736 [ 5.063755] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Jun 30 06:09:47.665678 [ 5.105736] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo Jun 30 06:09:47.713720 [ 5.109207] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 109,32 bit host data width,128 deep fifo Jun 30 06:09:47.725692 [ 5.123434] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Jun 30 06:09:47.725727 [ 5.138973] mmc_host mmc0: card is polling. Jun 30 06:09:47.737665 [ 5.145871] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 06:09:47.749720 [ 5.151983] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 06:09:47.761712 [ 5.158836] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 06:09:47.761737 [ 5.161814] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 06:09:47.773717 [ 5.166003] usb usb1: Product: EHCI Host Controller Jun 30 06:09:47.773742 [ 5.166012] usb usb1: Manufacturer: Linux 6.1.0-22-armmp-lpae ehci_hcd Jun 30 06:09:47.785738 [ 5.186836] usb usb1: SerialNumber: 12110000.usb Jun 30 06:09:47.785763 [ 5.197739] hub 1-0:1.0: USB hub found Jun 30 06:09:47.797673 [ 5.201152] hub 1-0:1.0: 3 ports detected Jun 30 06:09:47.797715 [ 5.207072] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 06:09:47.809743 [ 5.208492] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Jun 30 06:09:47.821717 [ 5.223392] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 06:09:47.833624 [ 5.230571] usb usb2: Product: USB Host Controller Jun 30 06:09:47.833713 [ 5.235330] usb usb2: Manufacturer: Linux 6.1.0-22-armmp-lpae ohci_hcd Jun 30 06:09:47.845683 [ 5.241839] usb usb2: SerialNumber: 12120000.usb Jun 30 06:09:47.845696 [ 5.250789] hub 2-0:1.0: USB hub found Jun 30 06:09:47.857653 [ 5.253117] hub 2-0:1.0: 3 ports detected Jun 30 06:09:47.857666 [ 5.278676] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 30 06:09:47.881668 [ 5.291517] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 30 06:09:47.893698 [ 5.298489] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 30 06:09:47.905665 [ 5.311911] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 30 06:09:47.917717 [ 5.317562] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Jun 30 06:09:47.929690 [ 5.326380] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 30 06:09:47.929732 [ 5.338542] scsi host0: ahci-dwc Jun 30 06:09:47.941694 [ 5.342345] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 110 Jun 30 06:09:47.941732 [ 5.352987] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 30 06:09:47.965701 [ 5.361774] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 06:09:47.965742 [ 5.371943] mmc0: new DDR MMC card at address 0001 Jun 30 06:09:47.977698 [ 5.376183] mmc1: new high speed SDHC card at address aaaa Jun 30 06:09:47.977710 [ 5.382774] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Jun 30 06:09:47.989595 [ 5.389560] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Jun 30 06:09:47.989692 [ 5.394618] mmcblk0: p1 p2 p3 p4 Jun 30 06:09:47.989728 [ 5.408346] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Jun 30 06:09:48.013648 [ 5.429188] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Jun 30 06:09:48.025654 [ 5.442927] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (241:0) Jun 30 06:09:48.049643 [ 5.732711] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 06:09:48.337810 [ 5.806832] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 06:09:48.409770 [ 5.825765] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 30 06:09:48.433701 [ 5.831338] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 30 06:09:48.433714 [ 5.837196] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 30 06:09:48.445707 [ 5.844637] ata1.00: configured for UDMA/133 Jun 30 06:09:48.445742 [ 5.848594] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 30 06:09:48.457652 [ 5.902189] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 06:09:48.505776 [ 5.909726] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 06:09:48.517835 [ 5.916564] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Jun 30 06:09:48.529619 [ 5.925354] xhci-hcd xhci-hcd.2.auto: irq 111, io mem 0x12000000 Jun 30 06:09:48.529717 [ 5.931523] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 06:09:48.529743 [ 5.936772] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 06:09:48.541702 [ 5.944406] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 06:09:48.553695 [ 5.951065] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 06:09:48.553709 [ 5.959200] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 06:09:48.565699 [ 5.966369] usb usb3: Product: xHCI Host Controller Jun 30 06:09:48.565699 [ 5.971232] usb usb3: Manufacturer: Linux 6.1.0-22-armmp-lpae xhci-hcd Jun 30 06:09:48.577703 [ 5.977732] usb usb3: SerialNumber: xhci-hcd.2.auto Jun 30 06:09:48.577744 [ 5.982651] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 06:09:48.589694 [ 5.994387] hub 3-0:1.0: USB hub found Jun 30 06:09:48.589694 [ 5.996810] hub 3-0:1.0: 1 port detected Jun 30 06:09:48.601702 [ 6.001920] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 06:09:48.601736 [ 6.009211] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Jun 30 06:09:48.613713 [ 6.016957] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 06:09:48.625693 [ 6.024151] usb usb4: Product: xHCI Host Controller Jun 30 06:09:48.625730 [ 6.029003] usb usb4: Manufacturer: Linux 6.1.0-22-armmp-lpae xhci-hcd Jun 30 06:09:48.637620 [ 6.035506] usb usb4: SerialNumber: xhci-hcd.2.auto Jun 30 06:09:48.637705 [ 6.042339] hub 4-0:1.0: USB hub found Jun 30 06:09:48.637747 [ 6.044663] hub 4-0:1.0: 1 port detected Jun 30 06:09:48.649681 [ 6.054671] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 30 06:09:48.661691 [ 6.060723] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 30 06:09:48.661732 [ 6.072947] sd 0:0:0:0: [sda] Write Protect is off Jun 30 06:09:48.673679 [ 6.078730] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 30 06:09:48.685698 [ 6.090183] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 30 06:09:48.697695 [ 6.092109] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 06:09:48.697729 [ 6.127098] sda: sda1 sda2 < sda5 > Jun 30 06:09:48.733660 [ 6.129955] sd 0:0:0:0: [sda] Attached SCSI disk Jun 30 06:09:48.733684 [ 6.204483] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 06:09:48.805689 [ 6.312532] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 06:09:48.913695 [ 6.474533] I/O error, dev mmcblk1, sector 7743712 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 2 Jun 30 06:09:49.081683 [ 6.753676] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 06:09:49.357692 [ 6.827038] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 06:09:49.429681 [ 6.941172] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 06:09:49.549717 [ 7.048773] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 06:09:49.657719 [ 7.156367] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 06:09:49.765735 [ 7.221673] random: crng init done Jun 30 06:09:49.825690 [ 7.263983] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 06:09:49.873739 [ 7.271501] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 06:09:49.873806 [ 7.346428] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. Jun 30 06:09:49.957718 [ 7.357251] device-mapper: uevent: version 1.0.3 Jun 30 06:09:49.957718 [ 7.361980] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Jun 30 06:09:49.969744 Begin: Loading essential drivers ... done. Jun 30 06:09:50.677685 Begin: Running /scripts/init-premount ... done. Jun 30 06:09:53.689716 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 30 06:09:53.701726 Begin: Running /scripts/local-premount ... done. Jun 30 06:09:53.773686 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 30 06:09:53.821684 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 30 06:09:53.917748 /dev/mapper/arndale--metrocentre--vg-root: clean, 39331/1220608 files, 378001/4882432 blocks Jun 30 06:09:54.181719 done. Jun 30 06:09:54.205712 [ 11.730596] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 30 06:09:54.337697 [ 11.968495] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. Jun 30 06:09:54.577688 done. Jun 30 06:09:54.577739 Begin: Running /scripts/local-bottom ... done. Jun 30 06:09:54.625705 Begin: Running /scripts/init-bottom ... done. Jun 30 06:09:54.685671 [ 12.322825] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. Jun 30 06:09:54.925738 INIT: version 3.06 booting Jun 30 06:09:55.261666 INIT: No inittab.d directory found Jun 30 06:09:55.357679 Using makefile-style concurrent boot in runlevel S. Jun 30 06:09:55.681680 Starting hotplug events dispatcher: systemd-udevd. Jun 30 06:09:57.349702 Synthesizing the initial hotplug events (subsystems)...done. Jun 30 06:09:57.589692 Synthesizing the initial hotplug events (devices)...done. Jun 30 06:09:58.165735 Waiting for /dev to be fully populated...[ 15.771303] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 06:09:58.369728 [ 15.801856] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 30 06:09:58.405732 [ 15.923350] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jun 30 06:09:58.525726 [ 15.944052] panfrost 11800000.gpu: clock rate = 533000000 Jun 30 06:09:58.549684 [ 16.107350] panfrost 11800000.gpu: mali-t600 id 0x600 major 0x0 minor 0x0 status 0x1 Jun 30 06:09:58.717794 [ 16.113731] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,31b4dfff Jun 30 06:09:58.717868 [ 16.121805] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 Jun 30 06:09:58.729798 [ 16.133530] panfrost 11800000.gpu: shader_present=0xf l2_present=0x1 Jun 30 06:09:58.741717 [ 16.186429] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 0 Jun 30 06:09:58.789854 [ 16.192606] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 06:09:58.801747 [ 16.217686] usb3503 usb-hub: switched to HUB mode Jun 30 06:09:58.813729 [ 16.220944] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 06:09:58.825782 [ 16.262176] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 06:09:58.873686 [ 16.395553] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 06:09:59.005684 [ 16.503619] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 06:09:59.113685 [ 16.541717] usb 1-3: new high-speed USB device number 2 using exynos-ehci Jun 30 06:09:59.149654 [ 16.611788] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 06:09:59.221740 [ 16.638568] OF: graph: no port node found in /soc/hdmi@14530000 Jun 30 06:09:59.245675 [ 16.706396] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Jun 30 06:09:59.317753 [ 16.713221] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jun 30 06:09:59.317819 [ 16.720519] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 06:09:59.329713 [ 16.738328] hub 1-3:1.0: USB hub found Jun 30 06:09:59.341718 [ 16.741003] hub 1-3:1.0: 3 ports detected Jun 30 06:09:59.341776 [ 17.037733] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Jun 30 06:09:59.641709 [ 17.068902] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 06:09:59.677698 [ 17.139245] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 06:09:59.749720 [ 17.151961] usb 1-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=77.32 Jun 30 06:09:59.761642 [ 17.158918] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Jun 30 06:09:59.761678 [ 17.166207] usb 1-3.2: Product: USB2.0 Hub Jun 30 06:09:59.773627 [ 17.171196] hub 1-3.2:1.0: USB hub found Jun 30 06:09:59.773660 [ 17.174595] hub 1-3.2:1.0: 4 ports detected Jun 30 06:09:59.773684 [ 17.274351] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 06:09:59.881626 [ 17.382033] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 06:09:59.989690 [ 17.473767] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 30 06:10:00.073737 [ 17.489930] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 06:10:00.101708 [ 17.595958] usb 1-3.2.4: New USB device found, idVendor=0b95, idProduct=772a, bcdDevice= 0.01 Jun 30 06:10:00.205782 [ 17.603439] usb 1-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 30 06:10:00.205858 [ 17.610719] usb 1-3.2.4: Product: AX88772 Jun 30 06:10:00.217768 [ 17.614754] usb 1-3.2.4: Manufacturer: ASIX Elec. Corp. Jun 30 06:10:00.217831 [ 17.619926] usb 1-3.2.4: SerialNumber: 000001 Jun 30 06:10:00.217878 [ 17.624426] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 06:10:00.229760 [ 17.633437] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 06:10:00.241715 [ 18.200290] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 30 06:10:00.805648 [ 18.888412] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 06:10:01.489791 [ 18.903972] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Jun 30 06:10:01.513742 [ 18.917855] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, ce:3b:cd:53:4b:69 Jun 30 06:10:01.525745 [ 18.930289] usbcore: registered new interface driver asix Jun 30 06:10:01.525806 done. Jun 30 06:10:01.825688 [ 19.782929] EXT4-fs (dm-0): re-mounted. Quota mode: none. Jun 30 06:10:02.377757 Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). Jun 30 06:10:02.425770 Checking file systems.../dev/sda1: clean, 922/61056 files, 25375/243968 blocks Jun 30 06:10:03.505605 done. Jun 30 06:10:03.553701 Cleaning up temporary files... /tmp. Jun 30 06:10:03.889727 [ 21.539690] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 30 06:10:04.141728 [ 21.591574] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Jun 30 06:10:04.201688 [ 21.885466] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k FS Jun 30 06:10:04.489772 Mounting local filesystems...done. Jun 30 06:10:04.909738 Activating swapfile swap, if any...done. Jun 30 06:10:04.921695 Cleaning up temporary files.... Jun 30 06:10:04.981737 Starting Setting kernel variables: sysctl. Jun 30 06:10:05.233668 [ 23.193137] audit: type=1400 audit(1719727805.844:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=880 comm="apparmor_parser" Jun 30 06:10:05.809778 [ 23.207994] audit: type=1400 audit(1719727805.852:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=881 comm="apparmor_parser" Jun 30 06:10:05.821772 [ 23.222007] audit: type=1400 audit(1719727805.852:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=881 comm="apparmor_parser" Jun 30 06:10:05.833758 [ 23.509948] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Jun 30 06:10:06.109795 [ 23.589462] audit: type=1400 audit(1719727806.240:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=924 comm="apparmor_parser" Jun 30 06:10:06.205730 [ 23.608699] audit: type=1400 audit(1719727806.256:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=924 comm="apparmor_parser" Jun 30 06:10:06.217791 [ 23.622123] audit: type=1400 audit(1719727806.260:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=924 comm="apparmor_parser" Jun 30 06:10:06.229770 [ 23.933559] audit: type=1400 audit(1719727806.584:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=923 comm="apparmor_parser" Jun 30 06:10:06.553702 [ 23.965692] audit: type=1400 audit(1719727806.588:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=923 comm="apparmor_parser" Jun 30 06:10:06.577772 [ 23.981539] audit: type=1400 audit(1719727806.592:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=923 comm="apparmor_parser" Jun 30 06:10:06.601747 [ 24.032708] audit: type=1400 audit(1719727806.684:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=923 comm="apparmor_parser" Jun 30 06:10:06.649703 Starting: AppArmorLoading AppArmor profiles...done. Jun 30 06:10:07.309726 . Jun 30 06:10:07.309777 [ 25.671235] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 30 06:10:08.281767 [ 25.677319] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jun 30 06:10:08.281840 Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1 Jun 30 06:10:09.949780 Copyright 2004-2022 Internet Systems Consortium. Jun 30 06:10:09.949853 All rights reserved. Jun 30 06:10:09.949894 For info, please visit https://www.isc.org/software/dhcp/ Jun 30 06:10:09.949941 Jun 30 06:10:09.949977 Listening on LPF/eth0/9e:04:00:59:64:5a Jun 30 06:10:09.961724 Sending on LPF/eth0/9e:04:00:59:64:5a Jun 30 06:10:09.961781 Sending on Socket/fallback Jun 30 06:10:09.961824 Created duid "\000\001\000\001.\023\263>\236\004\000YdZ". Jun 30 06:10:09.973744 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 Jun 30 06:10:09.973806 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 Jun 30 06:10:09.985741 DHCPOFFER of 10.149.64.44 from 10.149.64.4 Jun 30 06:10:09.985800 DHCPREQUEST for 10.149.64.44 on eth0 to 255.255.255.255 port 67 Jun 30 06:10:09.985848 DHCPACK of 10.149.64.44 from 10.149.64.4 Jun 30 06:10:09.997735 bound to 10.149.64.44 -- renewal in 238 seconds. Jun 30 06:10:09.997794 done. Jun 30 06:10:09.997833 Cleaning up temporary files.... Jun 30 06:10:09.997875 Starting nftables: none Jun 30 06:10:10.069679 . Jun 30 06:10:10.537761 INIT: Entering runlevel: 2 Jun 30 06:10:10.581594 Using makefile-style concurrent boot in runlevel 2. Jun 30 06:10:10.629653 Starting Apache httpd web server: apache2[ 29.150270] exynos4-fb 14400000.fimd: deferred probe timeout, ignoring dependency Jun 30 06:10:11.757785 [ 29.158768] exynos-mixer 14450000.mixer: deferred probe timeout, ignoring dependency Jun 30 06:10:11.757862 [ 29.166034] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations Jun 30 06:10:11.769762 [ 29.172751] exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm]) Jun 30 06:10:11.781740 [ 29.180814] exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm]) Jun 30 06:10:11.781807 [ 29.197849] exynos-drm exynos-drm: bound 14500000.dsi (ops hdmi_enable [exynosdrm]) Jun 30 06:10:11.805749 [ 29.204232] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm]) Jun 30 06:10:11.805816 [ 29.224778] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Jun 30 06:10:11.829753 [ 29.230054] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Jun 30 06:10:11.829815 [ 29.237409] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 Jun 30 06:10:11.841733 . Jun 30 06:10:12.673681 Starting NTP server: ntpd2024-06-30T06:10:13 ntpd[1129]: INIT: ntpd ntpsec-1.2.2: Starting Jun 30 06:10:13.033743 2024-06-30T06:10:13 ntpd[1129]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 30 06:10:13.033819 . Jun 30 06:10:13.033858 Starting periodic command scheduler: cron. Jun 30 06:10:13.189714 Starting system message bus: dbus. Jun 30 06:10:13.489702 Starting OpenBSD Secure Shell server: sshd. Jun 30 06:10:14.029764 Jun 30 06:10:15.073762 Debian GNU/Linux 12 arndale-metrocentre ttySAC2 Jun 30 06:10:15.073847 Jun 30 06:10:15.073885 arndale-metrocentre login: INIT: Switching to r INIT: No inittab.d directorUsing makefile-style concurrent boot in runlevel 6. Jun 30 06:15:14.961756 Stopping SMP IRQ Balancer: irqbalance. Jun 30 06:15:15.033710 Stopping hotplug events dispatcher: systemd-udevd. Jun 30 06:15:15.045729 Stopping nftables: none. Jun 30 06:15:15.045785 Saving the system clock to /dev/rtc0. Jun 30 06:15:16.029704 Hardware Clock updated to Sun Jun 30 06:15:16 UTC 2024. Jun 30 06:15:16.041689 Stopping Apache httpd web server: apache2. Jun 30 06:15:16.197738 Asking all remaining processes to terminate...done. Jun 30 06:15:16.797721 All processes ended within 1 seconds...done. Jun 30 06:15:16.797779 Deconfiguring network interfaces...ifdown: ignoring unknown interface eth0=eth0 Jun 30 06:15:16.929723 done. Jun 30 06:15:16.929751 [ 334.507214] EXT4-fs (sda1): unmounting filesystem. Jun 30 06:15:17.109693 Deactivating swap...done. Jun 30 06:15:17.169711 Unmounting local filesystems...done. Jun 30 06:15:17.169767 [ 334.854282] EXT4-fs (dm-0): re-mounted. Quota mode: none. Jun 30 06:15:17.457681 Will now restart. Jun 30 06:15:17.769681 [ 335.206365] asix 1-3.2.4:1.0 eth0: Link is Down Jun 30 06:15:17.805674 [ 335.274640] sd 0:0:0:0: [sda] Synchronizing SCSI cache Jun 30 06:15:17.877724 [ 335.282401] wake enabled for irq 101 (gpx1-4) Jun 30 06:15:17.877783 [ 335.285289] wake enabled for irq 102 (gpx1-5) Jun 30 06:15:17.889748 [ 335.289651] wake enabled for irq 103 (gpx1-6) Jun 30 06:15:17.889806 [ 335.293984] wake enabled for irq 104 (gpx1-7) Jun 30 06:15:17.889852 [ 335.298325] wake enabled for irq 105 (gpx2-0) Jun 30 06:15:17.901722 [ 335.302664] wake enabled for irq 106 (gpx2-1) Jun 30 06:15:17.901790 [ 335.307493] reboot: Re˙ Jun 30 06:15:18.237696 Jun 30 06:15:18.237748 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 06:15:18.249770 Jun 30 06:15:18.249794 CPU: Exynos5250@1000MHz Jun 30 06:15:18.249838 Jun 30 06:15:18.249875 Board: Arndale Jun 30 06:15:18.249914 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 06:15:18.249961 ready Jun 30 06:15:18.249998 DRAM: 2 GiB Jun 30 06:15:18.261679 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 06:15:18.273707 trace: enabled Jun 30 06:15:18.309678 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 06:15:18.669689 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 06:15:18.729747 In: serial Jun 30 06:15:18.729800 Out: serial Jun 30 06:15:18.729840 Err: serial Jun 30 06:15:18.729879 SCSI: ARNDALE SCSI INIT Jun 30 06:15:18.729920 Target spinup took 0 ms. Jun 30 06:15:18.741727 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 06:15:18.741788 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 06:15:18.753750 Net: Net Initialization Skipped Jun 30 06:15:18.753802 No ethernet found. Jun 30 06:15:18.753843 Hostname: arndale-metrocentre Jun 30 06:15:18.753886 Hit any key to stop autoboot: 2  1  0 Jun 30 06:15:20.685722 (Re)start USB... Jun 30 06:15:20.685785 USB0: USB EHCI 1.00 Jun 30 06:15:20.685827 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 06:15:26.289839 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 06:15:26.289914 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 06:15:26.733756 Waiting for Ethernet connection... done. Jun 30 06:15:28.437690 BOOTP broadcast 1 Jun 30 06:15:28.437764 EHCI timed out on TD - token=0x8008d80 Jun 30 06:15:33.237794 BOOTP broadcast 2 Jun 30 06:15:33.237865 DHCP client bound to address 10.149.64.44 (5006 ms) Jun 30 06:15:33.237912 Using asx0 device Jun 30 06:15:33.237952 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 06:15:33.249735 Filename 'pxelinux.0'. Jun 30 06:15:33.249790 Load address: 0x43e00000 Jun 30 06:15:33.249833 Loading: *### Jun 30 06:15:33.261689 2.2 MiB/s Jun 30 06:15:33.273758 done Jun 30 06:15:33.273810 Bytes transferred = 42430 (a5be hex) Jun 30 06:15:33.273855 missing environment variable: pxeuuid Jun 30 06:15:33.273900 Retrieving file: pxelinux.cfg/0A95402C Jun 30 06:15:33.273943 Using asx0 device Jun 30 06:15:33.285805 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 06:15:33.285867 Filename 'pxelinux.cfg/0A95402C'. Jun 30 06:15:33.285913 Load address: 0x51000000 Jun 30 06:15:33.285954 Loading: *# Jun 30 06:15:33.297740 31.3 KiB/s Jun 30 06:15:33.297794 done Jun 30 06:15:33.297833 Bytes transferred = 65 (41 hex) Jun 30 06:15:33.297903 Config file found Jun 30 06:15:33.297946 Ignoring unknown command: serial Jun 30 06:15:33.297989 1: local Jun 30 06:15:33.298027 scanning bus for devices... Jun 30 06:15:33.309699 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 06:15:33.333770 Type: Hard Disk Jun 30 06:15:33.333826 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 06:15:33.345765 Found 1 device(s). Jun 30 06:15:33.345820 Jun 30 06:15:33.345857 SCSI device 0: Jun 30 06:15:33.345896 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 06:15:33.345944 Type: Hard Disk Jun 30 06:15:33.357763 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 06:15:33.357824 ... is now current device Jun 30 06:15:33.357867 Scanning scsi 0... Jun 30 06:15:33.357906 Found U-Boot script /boot.scr Jun 30 06:15:33.537641 1744 bytes read in 41 ms (41 KiB/s) Jun 30 06:15:33.585764 ## Executing script at 50000000 Jun 30 06:15:33.585821 Loading dtbs/6.1.96+/exynos5250-arndale.dtb Jun 30 06:15:33.597688 46686 bytes read in 1311 ms (34.2 KiB/s) Jun 30 06:15:34.881706 1048588 bytes read in 121 ms (8.3 MiB/s) Jun 30 06:15:35.025762 Loaded xen-4.19-unstable to 0x41000000 (10000c) Jun 30 06:15:35.025821 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan Jun 30 06:15:35.037765 10035712 bytes read in 406 ms (23.6 MiB/s) Jun 30 06:15:35.457741 Loaded vmlinuz-6.1.96+ to 0x42000000 (992200) Jun 30 06:15:35.457800 command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 06:15:35.481693 12052996 bytes read in 513 ms (22.4 MiB/s) Jun 30 06:15:35.997660 Loaded initrd.img-6.1.96+ to 0x43300000 (b7ea04) Jun 30 06:15:35.997660 chosen { Jun 30 06:15:35.997660 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan"; Jun 30 06:15:36.009663 #size-cells = <0x00000001>; Jun 30 06:15:36.009663 #address-cells = <0x00000001>; Jun 30 06:15:36.021666 stdout-path = "serial2:115200n8"; Jun 30 06:15:36.021666 module@1 { Jun 30 06:15:36.021666 reg = <0x43300000 0x00b7ea04>; Jun 30 06:15:36.021666 compatible = "xen,linux-initrd", "xen,multiboot-module"; Jun 30 06:15:36.033671 }; Jun 30 06:15:36.033671 module@0 { Jun 30 06:15:36.033671 bootargs = "ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Jun 30 06:15:36.045664 reg = <0x42000000 0x00992200>; Jun 30 06:15:36.045664 compatible = "xen,linux-zimage", "xen,multiboot-module"; Jun 30 06:15:36.057658 }; Jun 30 06:15:36.057658 }; Jun 30 06:15:36.057658 Booting 0x41000000 - 0x43000000 Jun 30 06:15:36.057658 Kernel image @ 0x41000000 [ 0x000000 - 0x13d000 ] Jun 30 06:15:36.069674 ## Flattened Device Tree blob at 43000000 Jun 30 06:15:36.069674 Booting using the fdt blob at 0x43000000 Jun 30 06:15:36.069674 reserving fdt memory region: addr=43000000 size=c000 Jun 30 06:15:36.081783 Loading Device Tree to 4fff1000, end 4fffffff ... OK Jun 30 06:15:36.081853 Jun 30 06:15:36.081891 Starting kernel ...(fake run for tracing) Jun 30 06:15:36.093701 Jun 30 06:15:36.093752 Jun 30 06:15:36.093790 Starting kernel ... Jun 30 06:15:36.093831 Jun 30 06:15:36.093868 __ __ _ _ _ ___ _ _ _ Jun 30 06:15:36.141741 \ \/ /___ _ __ | || | / |/ _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Jun 30 06:15:36.153768 \ // _ \ '_ \ | || |_ | | (_) |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Jun 30 06:15:36.153830 / \ __/ | | | |__ _|| |\__, |__| |_| | | | \__ \ || (_| | |_) | | __/ Jun 30 06:15:36.165752 /_/\_\___|_| |_| |_|(_)_| /_/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Jun 30 06:15:36.177754 Jun 30 06:15:36.177840 (XEN) Xen version 4.19-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Sun Jun 30 04:46:21 UTC 2024 Jun 30 06:15:36.189751 (XEN) Latest ChangeSet: Wed Jun 26 16:07:30 2024 +0100 git:08f9b1dd9c-dirty Jun 30 06:15:36.189816 (XEN) build-id: a680bf34d2b64bef710e3f1f7a1f083566429466 Jun 30 06:15:36.189864 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Jun 30 06:15:36.201754 (XEN) 32-bit Execution: Jun 30 06:15:36.201809 (XEN) Processor Features: 00001031:00011011 Jun 30 06:15:36.213758 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Jun 30 06:15:36.213820 (XEN) Extensions: GenericTimer Security Jun 30 06:15:36.213866 (XEN) Debug Features: 02010555 Jun 30 06:15:36.225759 (XEN) Auxiliary Features: 00000000 Jun 30 06:15:36.225817 (XEN) Memory Model Features: 10201105 20000000 Jun 30 06:15:36.225863 (XEN) 01240000 02102211 Jun 30 06:15:36.237757 (XEN) ISA Features: 02101110 13112111 21232041 Jun 30 06:15:36.237816 (XEN) 11112131 10011142 00000000 Jun 30 06:15:36.237860 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Jun 30 06:15:36.249789 (XEN) Set SYSRAM to 0000000041000074 (00200074) Jun 30 06:15:36.261738 (XEN) SMP: Allowing 2 CPUs Jun 30 06:15:36.261794 (XEN) enabled workaround for: ARM erratum 766422 Jun 30 06:15:36.261840 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Jun 30 06:15:36.273743 (XEN) GICv2 initialization: Jun 30 06:15:36.273799 (XEN) gic_dist_addr=0000000010481000 Jun 30 06:15:36.273844 (XEN) gic_cpu_addr=0000000010482000 Jun 30 06:15:36.273888 (XEN) gic_hyp_addr=0000000010484000 Jun 30 06:15:36.285750 (XEN) gic_vcpu_addr=0000000010486000 Jun 30 06:15:36.285808 (XEN) gic_maintenance_irq=25 Jun 30 06:15:36.285852 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Jun 30 06:15:36.297734 (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2) Jun 30 06:15:36.297734 (XEN) Initializing Credit2 scheduler Jun 30 06:15:36.309726 (XEN) load_precision_shift: 18 Jun 30 06:15:36.309740 (XEN) load_window_shift: 30 Jun 30 06:15:36.309740 (XEN) underload_balance_tolerance: 0 Jun 30 06:15:36.309740 (XEN) overload_balance_tolerance: -3 Jun 30 06:15:36.321769 (XEN) runqueues arrangement: socket Jun 30 06:15:36.321832 (XEN) cap enforcement granularity: 10ms Jun 30 06:15:36.321878 (XEN) load tracking window length 1073741824 ns Jun 30 06:15:36.321923 (XEN) Allocated console ring of 16 KiB. Jun 30 06:15:36.333751 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Jun 30 06:15:36.333815 (XEN) CPU0: Guest atomics will try 1 times before pausing the domain Jun 30 06:15:36.345751 (XEN) Bringing up CPU1 Jun 30 06:15:36.345806 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Jun 30 06:15:36.345856 (XEN) Brought up 2 CPUs Jun 30 06:15:36.357741 (XEN) CPU 1 booted. Jun 30 06:15:36.357796 (XEN) I/O virtualisation disabled Jun 30 06:15:36.357841 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Jun 30 06:15:36.357887 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Jun 30 06:15:36.369760 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Jun 30 06:15:36.369821 (XEN) Initializing Credit2 scheduler Jun 30 06:15:36.381761 (XEN) load_precision_shift: 18 Jun 30 06:15:36.381818 (XEN) load_window_shift: 30 Jun 30 06:15:36.381861 (XEN) underload_balance_tolerance: 0 Jun 30 06:15:36.381904 (XEN) overload_balance_tolerance: -3 Jun 30 06:15:36.393764 (XEN) runqueues arrangement: socket Jun 30 06:15:36.393821 (XEN) cap enforcement granularity: 10ms Jun 30 06:15:36.393867 (XEN) load tracking window length 1073741824 ns Jun 30 06:15:36.405757 (XEN) Adding cpu 0 to runqueue 0 Jun 30 06:15:36.405814 (XEN) First cpu on runqueue, activating Jun 30 06:15:36.405859 (XEN) Adding cpu 1 to runqueue 0 Jun 30 06:15:36.405902 (XEN) alternatives: Patching with alt table 002d2cc8 -> 002d2da0 Jun 30 06:15:36.417775 (XEN) CPU0 will execute ICIALLU on guest exit Jun 30 06:15:36.417836 (XEN) CPU1 will execute ICIALLU on guest exit Jun 30 06:15:36.429677 (XEN) *** LOADING DOMAIN 0 *** Jun 30 06:15:36.429708 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Jun 30 06:15:36.429735 (XEN) Loading ramdisk from boot module @ 0000000043300000 Jun 30 06:15:36.441713 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Jun 30 06:15:36.441774 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Jun 30 06:15:36.981753 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Jun 30 06:15:36.993676 (XEN) Allocating PPI 16 for event channel interrupt Jun 30 06:15:37.017770 (XEN) d0: extended regions not supported for 32-bit guests Jun 30 06:15:37.017831 (XEN) Loading zImage from 0000000042000000 to 0000000067600000-0000000067f92200 Jun 30 06:15:37.029723 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d7ea04 Jun 30 06:15:37.125614 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b4c6 Jun 30 06:15:37.221760 (XEN) Initial low memory virq threshold set at 0x4000 pages. Jun 30 06:15:37.233751 (XEN) Scrubbing Free RAM in background Jun 30 06:15:37.233809 (XEN) Std. Loglevel: All Jun 30 06:15:37.233851 (XEN) Guest Loglevel: All Jun 30 06:15:37.233892 (XEN) *************************************************** Jun 30 06:15:37.245746 (XEN) WARNING: SILO mode is not enabled. Jun 30 06:15:37.245746 (XEN) It has implications on the security of the system, Jun 30 06:15:37.257749 (XEN) unless the communications have been forbidden between Jun 30 06:15:37.257815 (XEN) untrusted domains. Jun 30 06:15:37.257858 (XEN) *************************************************** Jun 30 06:15:37.269701 (XEN) 3... 2... 1... Jun 30 06:15:40.269769 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 30 06:15:40.269852 (XEN) Freed 324kB init memory. Jun 30 06:15:40.281690 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 06:15:41.341655 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Jun 30 06:15:41.353686 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Jun 30 06:15:41.365710 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Jun 30 06:15:41.365744 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Jun 30 06:15:41.377664 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 06:15:41.377697 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 06:15:41.425705 [ 0.000000] Linux version 6.1.96+ (osstest@himrod1) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Sun Jun 30 02:58:42 UTC 2024 Jun 30 06:15:41.437716 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 30 06:15:41.449700 [ 0.000000] CPU: div instructions available: patching division code Jun 30 06:15:41.449736 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 06:15:41.461714 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 06:15:41.461753 [ 0.000000] Memory policy: Data cache writealloc Jun 30 06:15:41.473707 [ 0.000000] Xen 4.19 support found Jun 30 06:15:41.473739 [ 0.000000] efi: UEFI not found. Jun 30 06:15:41.473763 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 Jun 30 06:15:41.485704 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 06:15:41.485736 [ 0.000000] Zone ranges: Jun 30 06:15:41.485760 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Jun 30 06:15:41.497703 [ 0.000000] Normal empty Jun 30 06:15:41.497735 [ 0.000000] HighMem empty Jun 30 06:15:41.497758 [ 0.000000] Movable zone start for each node Jun 30 06:15:41.509704 [ 0.000000] Early memory node ranges Jun 30 06:15:41.509735 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Jun 30 06:15:41.509763 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Jun 30 06:15:41.521738 [ 0.000000] psci: probing for conduit method from DT. Jun 30 06:15:41.521771 [ 0.000000] psci: PSCIv1.1 detected in firmware. Jun 30 06:15:41.533707 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Jun 30 06:15:41.533740 [ 0.000000] psci: Trusted OS migration not required Jun 30 06:15:41.545712 [ 0.000000] psci: SMC Calling Convention v1.2 Jun 30 06:15:41.545744 [ 0.000000] percpu: Embedded 16 pages/cpu s35412 r8192 d21932 u65536 Jun 30 06:15:41.557711 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 Jun 30 06:15:41.557746 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 06:15:41.581703 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 06:15:41.581741 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Jun 30 06:15:41.593712 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Jun 30 06:15:41.605702 [ 0.000000] Memory: 416852K/524288K available (14336K kernel code, 2180K rwdata, 5600K rodata, 2048K init, 438K bss, 41900K reserved, 65536K cma-reserved, 0K highmem) Jun 30 06:15:41.617702 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 06:15:41.617736 [ 0.000000] trace event string verifier disabled Jun 30 06:15:41.629709 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 06:15:41.629741 [ 0.000000] rcu: RCU event tracing is enabled. Jun 30 06:15:41.629767 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Jun 30 06:15:41.641696 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Jun 30 06:15:41.653702 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 06:15:41.653737 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 06:15:41.665705 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 06:15:41.665739 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 06:15:41.677711 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Jun 30 06:15:41.677745 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 06:15:41.689714 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 06:15:41.701703 [ 0.000013] Switching to timer-based delay loop, resolution 41ns Jun 30 06:15:41.701737 [ 0.000501] Console: colour dummy device 80x30 Jun 30 06:15:41.713701 [ 0.293402] printk: console [hvc0] enabled Jun 30 06:15:41.713732 [ 0.297595] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Jun 30 06:15:41.725711 [ 0.307995] CPU: Testing write buffer coherency: ok Jun 30 06:15:41.725744 [ 0.312936] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 06:15:41.737710 [ 0.322490] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 06:15:41.749704 [ 0.328903] pid_max: default: 32768 minimum: 301 Jun 30 06:15:41.749737 [ 0.333696] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 06:15:41.761711 [ 0.340971] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 06:15:41.761748 [ 0.349382] /cpus/cpu@0 missing clock-frequency property Jun 30 06:15:41.773707 [ 0.354173] /cpus/cpu@1 missing clock-frequency property Jun 30 06:15:41.773740 [ 0.359568] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 06:15:41.785716 [ 0.366086] xen:grant_table: Grant tables using version 1 layout Jun 30 06:15:41.785750 [ 0.371417] Grant table initialized Jun 30 06:15:41.797712 [ 0.374957] xen:events: Using FIFO-based ABI Jun 30 06:15:41.797746 [ 0.379275] Xen: initializing cpu0 Jun 30 06:15:41.797770 [ 0.382805] Setting up static identity map for 0x60300000 - 0x603000ac Jun 30 06:15:41.809704 [ 0.390555] rcu: Hierarchical SRCU implementation. Jun 30 06:15:41.809737 [ 0.394190] rcu: Max phase no-delay instances is 1000. Jun 30 06:15:41.821689 [ 0.402262] EFI services will not be available. Jun 30 06:15:41.821722 [ 0.405567] smp: Bringing up secondary CPUs ... Jun 30 06:15:41.821747 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 06:15:41.893678 [ 0.480178] Xen: initializing cpu1 Jun 30 06:15:41.905702 [ 0.480334] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 06:15:41.905736 [ 0.480363] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 06:15:41.917704 [ 0.499233] smp: Brought up 1 node, 2 CPUs Jun 30 06:15:41.917736 [ 0.503007] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 06:15:41.929656 [ 0.509318] CPU: All CPU(s) started in SVC mode. Jun 30 06:15:41.929689 [ 0.514718] devtmpfs: initialized Jun 30 06:15:41.929713 [ 0.527067] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 06:15:41.953712 [ 0.533556] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Jun 30 06:15:41.965705 [ 0.543281] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 06:15:41.965740 [ 0.551313] pinctrl core: initialized pinctrl subsystem Jun 30 06:15:41.977699 [ 0.557820] DMI not present or invalid. Jun 30 06:15:41.977731 [ 0.560930] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 06:15:41.977759 [ 0.568124] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 06:15:41.989699 [ 0.576894] thermal_sys: Registered thermal governor 'step_wise' Jun 30 06:15:42.001697 [ 0.577027] software IO TLB: area num 2. Jun 30 06:15:42.001729 [ 0.585719] software IO TLB: only able to allocate 8 MB Jun 30 06:15:42.013693 [ 0.592860] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Jun 30 06:15:42.013728 [ 0.598043] No ATAGs? Jun 30 06:15:42.013751 [ 0.600391] hw-breakpoint: Failed to enable monitor mode on CPU 0. Jun 30 06:15:42.025682 [ 0.608883] Serial: AMBA PL011 UART driver Jun 30 06:15:42.025714 [ 0.631034] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 62 Jun 30 06:15:42.049660 [ 0.680487] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 30 06:15:42.109630 [ 0.704685] xen:balloon: Initialising balloon driver Jun 30 06:15:42.121600 [ 0.712248] iommu: Default domain type: Translated Jun 30 06:15:42.133716 [ 0.715745] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 06:15:42.133756 [ 0.722686] SCSI subsystem initialized Jun 30 06:15:42.145743 [ 0.726249] usbcore: registered new interface driver usbfs Jun 30 06:15:42.145776 [ 0.731493] usbcore: registered new interface driver hub Jun 30 06:15:42.157713 [ 0.736884] usbcore: registered new device driver usb Jun 30 06:15:42.157746 [ 0.743496] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 06:15:42.169697 [ 0.747103] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 06:15:42.169731 [ 0.753421] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 06:15:42.181692 [ 0.761853] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 06:15:42.193697 [ 0.770991] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 06:15:42.193731 [ 0.776502] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 06:15:42.193757 [ 0.781196] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 06:15:42.205705 [ 0.787445] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 06:15:42.205738 [ 0.792671] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 06:15:42.217715 [ 0.797449] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 06:15:42.217750 [ 0.803565] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 06:15:42.229714 [ 0.808743] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 06:15:42.229747 [ 0.813658] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 06:15:42.241703 [ 0.819690] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 06:15:42.241736 [ 0.825460] pps_core: LinuxPPS API ver. 1 registered Jun 30 06:15:42.241762 [ 0.829918] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 06:15:42.253712 [ 0.839102] PTP clock support registered Jun 30 06:15:42.265644 [ 0.843289] EDAC MC: Ver: 3.0.0 Jun 30 06:15:42.265644 [ 0.848571] vgaarb: loaded Jun 30 06:15:42.265644 [ 0.854821] clocksource: Switched to clocksource arch_sys_counter Jun 30 06:15:42.277673 [ 0.877109] NET: Registered PF_INET protocol family Jun 30 06:15:42.301701 [ 0.880745] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Jun 30 06:15:42.301738 [ 0.888649] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 06:15:42.313709 [ 0.896346] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 06:15:42.325682 [ 0.904142] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Jun 30 06:15:42.325718 [ 0.912007] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Jun 30 06:15:42.337720 [ 0.919279] TCP: Hash tables configured (established 4096 bind 4096) Jun 30 06:15:42.337754 [ 0.925639] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 06:15:42.349713 [ 0.932188] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 06:15:42.361708 [ 0.939325] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 06:15:42.361743 [ 0.945788] RPC: Registered named UNIX socket transport module. Jun 30 06:15:42.373700 [ 0.950923] RPC: Registered udp transport module. Jun 30 06:15:42.373733 [ 0.955719] RPC: Registered tcp transport module. Jun 30 06:15:42.373758 [ 0.960470] RPC: Registered tcp NFSv4.1 backchannel transport module. Jun 30 06:15:42.385687 [ 0.966991] PCI: CLS 0 bytes, default 64 Jun 30 06:15:42.385719 [ 0.972319] Initialise system trusted keyrings Jun 30 06:15:42.397698 [ 0.975720] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Jun 30 06:15:42.397733 [ 0.977585] Trying to unpack rootfs image as initramfs... Jun 30 06:15:42.409670 [ 0.989690] squashfs: version 4.0 (2009/01/31) Phillip Lougher Jun 30 06:15:42.409704 [ 1.017961] NFS: Registering the id_resolver key type Jun 30 06:15:42.433656 [ 1.021680] Key type id_resolver registered Jun 30 06:15:42.445703 [ 1.025943] Key type id_legacy registered Jun 30 06:15:42.445735 [ 1.030115] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Jun 30 06:15:42.457686 [ 1.036805] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Jun 30 06:15:42.457724 [ 1.084252] Key type asymmetric registered Jun 30 06:15:42.505702 [ 1.087017] Asymmetric key parser 'x509' registered Jun 30 06:15:42.505734 [ 1.092070] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Jun 30 06:15:42.517647 [ 1.099472] io scheduler mq-deadline registered Jun 30 06:15:42.517647 [ 1.103999] io scheduler kyber registered Jun 30 06:15:42.529647 [ 1.140925] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Jun 30 06:15:42.565669 [ 1.260237] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 06:15:42.685687 [ 1.266479] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 06:15:42.697645 [ 1.287191] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 06:15:42.709709 [ 1.293399] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 06:15:42.721720 [ 1.304382] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 06:15:42.733675 [ 1.310597] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 06:15:42.733715 [ 1.321223] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 06:15:42.745709 [ 1.327472] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 06:15:42.757688 [ 1.341461] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 06:15:42.769650 [ 1.351815] xen:xen_evtchn: Event-channel device installed Jun 30 06:15:42.769684 [ 1.404376] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 06:15:42.829649 [ 1.413069] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 113, base_baud = 0) is a S3C6400/10 Jun 30 06:15:42.841734 [ 1.421175] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 114, base_baud = 0) is a S3C6400/10 Jun 30 06:15:42.841772 [ 1.430313] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 115, base_baud = 0) is a S3C6400/10 Jun 30 06:15:42.853793 [ 1.439558] SuperH (H)SCI(F) driver initialized Jun 30 06:15:42.865701 [ 1.444345] STMicroelectronics ASC driver initialized Jun 30 06:15:42.865740 [ 1.449728] STM32 USART driver initialized Jun 30 06:15:42.865765 [ 1.461089] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 06:15:42.889626 [ 1.506284] brd: module loaded Jun 30 06:15:42.925667 [ 1.512878] loop: module loaded Jun 30 06:15:42.937639 [ 1.530847] Freeing initrd memory: 11772K Jun 30 06:15:42.949658 [ 1.611594] Invalid max_queues (4), will use default max: 2. Jun 30 06:15:43.033645 [ 1.637728] tun: Universal TUN/TAP device driver, 1.6 Jun 30 06:15:43.057657 [ 1.641624] CAN device driver interface Jun 30 06:15:43.057657 [ 1.646713] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Jun 30 06:15:43.069681 [ 1.657110] xen_netfront: Initialising Xen virtual ethernet driver Jun 30 06:15:43.081700 [ 1.661982] pegasus: Pegasus/Pegasus II USB Ethernet driver Jun 30 06:15:43.081735 [ 1.667597] usbcore: registered new interface driver pegasus Jun 30 06:15:43.093706 [ 1.673310] usbcore: registered new interface driver asix Jun 30 06:15:43.093740 [ 1.678783] usbcore: registered new interface driver ax88179_178a Jun 30 06:15:43.105730 [ 1.684949] usbcore: registered new interface driver cdc_ether Jun 30 06:15:43.105730 [ 1.690865] usbcore: registered new interface driver smsc75xx Jun 30 06:15:43.117713 [ 1.696682] usbcore: registered new interface driver smsc95xx Jun 30 06:15:43.117752 [ 1.702469] usbcore: registered new interface driver net1080 Jun 30 06:15:43.129670 [ 1.708211] usbcore: registered new interface driver cdc_subset Jun 30 06:15:43.129670 [ 1.714186] usbcore: registered new interface driver zaurus Jun 30 06:15:43.141755 [ 1.719865] usbcore: registered new interface driver cdc_ncm Jun 30 06:15:43.141795 [ 1.729053] usbcore: registered new interface driver usb-storage Jun 30 06:15:43.153634 [ 1.762882] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 06:15:43.177573 [ 1.771602] s5m-rtc s5m-rtc: setting system clock to 2024-06-30T06:15:44 UTC (1719728144) Jun 30 06:15:43.201662 [ 1.780118] i2c_dev: i2c /dev entries driver Jun 30 06:15:43.201696 [ 1.790230] syscon-poweroff 10040000.system-controller:syscon-poweroff: pm_power_off already claimed for psci_sys_poweroff Jun 30 06:15:43.213706 [ 1.799955] syscon-poweroff: probe of 10040000.system-controller:syscon-poweroff failed with error -16 Jun 30 06:15:43.225703 [ 1.811466] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Jun 30 06:15:43.237664 [ 1.822772] device-mapper: uevent: version 1.0.3 Jun 30 06:15:43.237697 [ 1.826315] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Jun 30 06:15:43.249722 [ 1.835448] cpu cpu0: OPP table can't be empty Jun 30 06:15:43.261701 [ 1.840378] failed to register cpuidle driver Jun 30 06:15:43.261734 [ 1.843472] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Jun 30 06:15:43.273695 [ 1.852056] sdhci: Secure Digital Host Controller Interface driver Jun 30 06:15:43.273730 [ 1.856887] sdhci: Copyright(c) Pierre Ossman Jun 30 06:15:43.273756 [ 1.865268] sdhci-pltfm: SDHCI platform and OF driver helper Jun 30 06:15:43.285663 [ 1.873021] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 06:15:43.297700 [ 1.878449] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Jun 30 06:15:43.297735 [ 1.884962] usbcore: registered new interface driver usbhid Jun 30 06:15:43.309607 [ 1.889801] usbhid: USB HID core driver Jun 30 06:15:43.309607 [ 1.900577] NET: Registered PF_INET6 protocol family Jun 30 06:15:43.321683 [ 1.905234] Segment Routing with IPv6 Jun 30 06:15:43.321719 [ 1.907935] In-situ OAM (IOAM) with IPv6 Jun 30 06:15:43.333697 [ 1.911972] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Jun 30 06:15:43.333731 [ 1.918390] NET: Registered PF_PACKET protocol family Jun 30 06:15:43.345701 [ 1.923027] can: controller area network core Jun 30 06:15:43.345734 [ 1.927507] NET: Registered PF_CAN protocol family Jun 30 06:15:43.345760 [ 1.932293] can: raw protocol Jun 30 06:15:43.357694 [ 1.935363] can: broadcast manager protocol Jun 30 06:15:43.357726 [ 1.939589] can: netlink gateway - max_hops=1 Jun 30 06:15:43.357751 [ 1.944269] Key type dns_resolver registered Jun 30 06:15:43.369701 [ 1.948992] ThumbEE CPU extension supported. Jun 30 06:15:43.369733 [ 1.952697] Registering SWP/SWPB emulation handler Jun 30 06:15:43.369759 [ 1.958049] Loading compiled-in X.509 certificates Jun 30 06:15:43.381655 [ 1.986269] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 06:15:43.405701 [ 1.992365] clk: Not disabling unused clocks Jun 30 06:15:43.417676 [ 1.999367] Freeing unused kernel image (initmem) memory: 2048K Jun 30 06:15:43.417711 [ 2.005617] Run /init as init process Jun 30 06:15:43.429616 Loading, please wait... Jun 30 06:15:43.453642 Starting systemd-udevd version 252.26-1~deb12u2 Jun 30 06:15:43.525639 [ 3.458785] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 06:15:44.881746 [ 3.489701] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 06:15:44.917699 [ 3.497379] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 06:15:44.917736 [ 3.510964] phy phy-12130000.phy.8: phy_power_on was called before phy_init Jun 30 06:15:44.929652 [ 3.516612] exynos-ohci 12120000.usb: USB Host Controller Jun 30 06:15:44.941677 [ 3.522058] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Jun 30 06:15:44.941715 [ 3.530763] Synopsys Designware Multimedia Card Interface Driver Jun 30 06:15:44.953631 [ 3.557891] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 30 06:15:44.977666 [ 3.564239] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 30 06:15:44.989674 [ 3.571521] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 30 06:15:45.001667 [ 3.580050] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 30 06:15:45.001702 [ 3.580088] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 30 06:15:45.013619 [ 3.603019] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 06:15:45.025625 [ 3.638417] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 30 06:15:45.061668 [ 3.644135] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Jun 30 06:15:45.073674 [ 3.653092] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 30 06:15:45.073724 [ 3.662371] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 Jun 30 06:15:45.085638 [ 3.708950] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 30 06:15:45.133644 [ 3.714032] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 30 06:15:45.133678 [ 3.719649] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo Jun 30 06:15:45.145672 [ 3.729398] mmc_host mmc0: card is polling. Jun 30 06:15:45.145707 [ 3.734144] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 30 06:15:45.157672 [ 3.739877] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 30 06:15:45.157705 [ 3.745375] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 127,32 bit host data width,128 deep fifo Jun 30 06:15:45.169683 [ 3.749601] scsi host0: ahci-dwc Jun 30 06:15:45.169714 [ 3.755663] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 06:15:45.181681 [ 3.761526] hub 1-0:1.0: USB hub found Jun 30 06:15:45.193665 [ 3.767752] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 06:15:45.193704 [ 3.788637] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 128 Jun 30 06:15:45.217668 [ 3.793126] hub 1-0:1.0: 3 ports detected Jun 30 06:15:45.217700 [ 3.802092] phy phy-12130000.phy.8: phy_power_on was called before phy_init Jun 30 06:15:45.229666 [ 3.807706] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 06:15:45.229700 [ 3.813258] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Jun 30 06:15:45.241648 [ 3.822409] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 Jun 30 06:15:45.241681 [ 3.855007] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 06:15:45.277653 [ 3.865487] hub 2-0:1.0: USB hub found Jun 30 06:15:45.289625 [ 3.874997] hub 2-0:1.0: 3 ports detected Jun 30 06:15:45.289657 [ 3.885710] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Jun 30 06:15:45.301638 [ 3.888604] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 06:15:45.313675 [ 3.890319] s3c-rtc 101e0000.rtc: registered as rtc1 Jun 30 06:15:45.325706 [ 3.901326] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 30 06:15:45.337689 [ 3.914864] mmc1: new high speed SDHC card at address aaaa Jun 30 06:15:45.337691 [ 3.921318] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Jun 30 06:15:45.337717 [ 3.929810] mmc0: new DDR MMC card at address 0001 Jun 30 06:15:45.349634 [ 3.941607] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Jun 30 06:15:45.361622 [ 3.953537] mmcblk0: p1 p2 p3 p4 Jun 30 06:15:45.373620 [ 3.966119] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Jun 30 06:15:45.385645 [ 3.973195] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Jun 30 06:15:45.397645 [ 3.980200] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Jun 30 06:15:45.397680 [ 4.314867] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 30 06:15:45.733654 [ 4.320847] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 30 06:15:45.745669 [ 4.326522] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 30 06:15:45.745704 [ 4.342028] ata1.00: configured for UDMA/133 Jun 30 06:15:45.757661 [ 4.345446] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 30 06:15:45.769677 [ 4.355095] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 30 06:15:45.781674 [ 4.361240] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 30 06:15:45.781707 [ 4.366633] sd 0:0:0:0: [sda] Write Protect is off Jun 30 06:15:45.793691 [ 4.371465] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 30 06:15:45.793730 [ 4.380770] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 30 06:15:45.805638 [ 4.411775] sda: sda1 sda2 < sda5 > Jun 30 06:15:45.829645 [ 4.414648] sd 0:0:0:0: [sda] Attached SCSI disk Jun 30 06:15:45.841599 [ 4.444062] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Jun 30 06:15:45.865637 [ 4.517006] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Jun 30 06:15:45.937661 [ 4.524416] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 06:15:45.949655 [ 4.528609] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 06:15:45.949692 [ 4.543364] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Jun 30 06:15:45.973668 [ 4.552924] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Jun 30 06:15:45.973703 [ 4.558095] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 06:15:45.985665 [ 4.563416] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 06:15:45.985702 [ 4.571194] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 06:15:45.997669 [ 4.578653] hub 3-0:1.0: USB hub found Jun 30 06:15:45.997701 [ 4.581683] hub 3-0:1.0: 1 port detected Jun 30 06:15:45.997726 [ 4.586402] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 06:15:46.009697 [ 4.594551] hub 4-0:1.0: USB hub found Jun 30 06:15:46.009700 [ 4.597720] hub 4-0:1.0: 1 port detected Jun 30 06:15:46.021572 [ 4.899391] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 06:15:46.321665 [ 4.973079] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 06:15:46.393688 [ 5.107098] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 06:15:46.537599 [ 5.215249] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 06:15:46.645601 [ 5.323388] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 06:15:46.753597 [ 5.431555] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 06:15:46.861603 [ 5.595459] I/O error, dev mmcblk1, sector 7743714 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 2 Jun 30 06:15:47.017660 [ 5.875001] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 06:15:47.305604 [ 5.949526] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 06:15:47.377619 [ 6.063811] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 06:15:47.485664 [ 6.171533] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 06:15:47.593662 [ 6.279250] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 06:15:47.701658 [ 6.386975] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 06:15:47.813671 [ 6.394559] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 06:15:47.813708 [ 7.034825] random: crng init done Jun 30 06:15:48.449631 Begin: Loading essential drivers ... done. Jun 30 06:15:49.097629 Begin: Running /scripts/init-premount ... done. Jun 30 06:15:52.109708 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 30 06:15:52.121635 Begin: Running /scripts/local-premount ... done. Jun 30 06:15:52.121668 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 30 06:15:52.169626 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 30 06:15:52.253678 /dev/mapper/arndale--metrocentre--vg-root: clean, 46009/1220608 files, 605309/4882432 blocks Jun 30 06:15:52.517662 done. Jun 30 06:15:52.529611 [ 11.120882] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 30 06:15:52.541716 [ 11.531001] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: disabled. Jun 30 06:15:52.949841 done. Jun 30 06:15:52.949905 Begin: Running /scripts/local-bottom ... done. Jun 30 06:15:53.009756 Begin: Running /scripts/init-bottom ... done. Jun 30 06:15:53.057701 INIT: version 3.06 booting Jun 30 06:15:53.549717 INIT: No inittab.d directory found Jun 30 06:15:53.633718 Using makefile-style concurrent boot in runlevel S. Jun 30 06:15:53.945793 Starting hotplug events dispatcher: systemd-udevd. Jun 30 06:15:55.553708 Synthesizing the initial hotplug events (subsystems)...done. Jun 30 06:15:56.021723 Synthesizing the initial hotplug events (devices)...[ 14.733556] wm8994 3-001a: Device is not a WM8994, ID is 0 Jun 30 06:15:56.153758 [ 14.740996] wm8994: probe of 3-001a failed with error -22 Jun 30 06:15:56.153818 [ 15.633487] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 30 06:15:57.053749 [ 15.671870] mc: Linux media interface: v0.10 Jun 30 06:15:57.089717 [ 15.688989] s5p-secss 10830000.sss: s5p-sss driver registered Jun 30 06:15:57.113696 done. Jun 30 06:15:57.135049 Waiting for /dev to be fully populated...[ 15.764906] videodev: Linux video capture interface: v2.00 Jun 30 06:15:57.185690 [ 15.923100] s5p-mfc 11000000.codec: Adding to iommu group 0 Jun 30 06:15:57.341725 [ 15.953606] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Jun 30 06:15:57.377718 [ 15.990146] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 06:15:57.413733 [ 15.998878] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 06:15:57.425766 [ 16.006557] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 06:15:57.425840 [ 16.019642] s5p-mfc 11000000.codec: decoder registered as /dev/video0 Jun 30 06:15:57.437768 [ 16.024926] s5p-mfc 11000000.codec: encoder registered as /dev/video1 Jun 30 06:15:57.449698 [ 16.112767] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 06:15:57.533751 [ 16.129197] exynos-gsc 13e00000.gsc: Adding to iommu group 1 Jun 30 06:15:57.545762 [ 16.134650] exynos-gsc 13e10000.gsc: Adding to iommu group 2 Jun 30 06:15:57.557700 [ 16.159294] exynos-gsc 13e20000.gsc: Adding to iommu group 3 Jun 30 06:15:57.581697 [ 16.188792] exynos-gsc 13e30000.gsc: Adding to iommu group 4 Jun 30 06:15:57.605736 [ 16.204127] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 06:15:57.629704 [ 16.324874] usb3503 usb-hub: switched to HUB mode Jun 30 06:15:57.737708 [ 16.328230] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 06:15:57.749726 [ 16.359723] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 06:15:57.785705 [ 16.469340] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 06:15:57.893721 [ 16.540300] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Jun 30 06:15:57.965698 [ 16.577993] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 06:15:58.001728 [ 16.675390] usb 2-3: new high-speed USB device number 2 using exynos-ehci Jun 30 06:15:58.097741 [ 16.686234] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 06:15:58.109729 [ 16.860870] I/O error, dev mmcblk1, sector 7743715 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 2 Jun 30 06:15:58.277780 [ 16.898960] hub 2-3:1.0: USB hub found Jun 30 06:15:58.313746 [ 16.901496] hub 2-3:1.0: 3 ports detected Jun 30 06:15:58.325686 [ 17.065965] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 06:15:58.493776 [ 17.073601] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 06:15:58.493848 [ 17.082431] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 06:15:58.505766 [ 17.094751] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 06:15:58.517769 [ 17.102448] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 06:15:58.529775 [ 17.111152] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 06:15:58.541682 [ 17.154928] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 06:15:58.577740 [ 17.224484] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 06:15:58.649756 [ 17.234864] usb 2-3.2: new high-speed USB device number 3 using exynos-ehci Jun 30 06:15:58.649819 [ 17.344560] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 06:15:58.769708 [ 17.398234] hub 2-3.2:1.0: USB hub found Jun 30 06:15:58.817744 [ 17.401229] hub 2-3.2:1.0: 4 ports detected Jun 30 06:15:58.817802 [ 17.452346] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 06:15:58.877737 [ 17.465001] usbcore: registered new device driver onboard-usb-hub Jun 30 06:15:58.889679 [ 17.560205] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 06:15:58.985707 [ 17.585719] hub 2-3.2:1.0: USB hub found Jun 30 06:15:58.997716 [ 17.588657] hub 2-3.2:1.0: 4 ports detected Jun 30 06:15:59.009718 [ 17.600897] hub 2-3.2:1.0: USB hub found Jun 30 06:15:59.021729 [ 17.603872] hub 2-3.2:1.0: 4 ports detected Jun 30 06:15:59.021787 [ 17.667999] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 06:15:59.093762 [ 17.675632] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 06:15:59.093830 done. Jun 30 06:15:59.141691 [ 17.934881] usb 2-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 30 06:15:59.357722 [ 18.100912] EXT4-fs (dm-0): re-mounted. Quota mode: disabled. Jun 30 06:15:59.513731 [ 18.118362] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 30 06:15:59.537789 Checking file systems...[ 18.796610] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 06:16:00.221757 [ 18.810858] Asix Electronics AX88772A usb-002:004:10: attached PHY driver (mii_bus:phy_addr=usb-002:004:10, irq=POLL) Jun 30 06:16:00.233777 [ 18.820776] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, f2:74:89:01:66:41 Jun 30 06:16:00.245736 /dev/sda1: clean, 2105/61056 files, 43311/243968 blocks Jun 30 06:16:01.169731 done. Jun 30 06:16:01.205685 Cleaning up temporary files... /tmp Jun 30 06:16:01.469713 . Jun 30 06:16:01.469764 [ 20.268817] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 30 06:16:01.685756 [ 20.320825] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: disabled. Jun 30 06:16:01.745705 [ 20.409968] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k Jun 30 06:16:01.829773 Mounting local filesystems...done. Jun 30 06:16:02.081734 Activating swapfile swap, if any...done. Jun 30 06:16:02.081791 Cleaning up temporary files.... Jun 30 06:16:02.157726 Starting Setting kernel variables: sysctl. Jun 30 06:16:02.337721 [ 22.306661] xenbr0: port 1(eth0) entered blocking state Jun 30 06:16:03.729746 [ 22.310522] xenbr0: port 1(eth0) entered disabled state Jun 30 06:16:03.729810 [ 22.316012] device eth0 entered promiscuous mode Jun 30 06:16:03.729882 [ 22.326105] asix 2-3.2.4:1.0 eth0: configuring for phy/internal link mode Jun 30 06:16:03.741735 Configuring network interfaces...RTNETLINK answers: Operation not supported Jun 30 06:16:05.445781 Jun 30 06:16:05.445845 Waiting for xenbr0 to get ready (MAXWAIT is 2 seconds). Jun 30 06:16:05.457723 [ 24.492110] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 30 06:16:05.913780 [ 24.498110] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jun 30 06:16:05.913846 [ 24.504451] xenbr0: port 1(eth0) entered blocking state Jun 30 06:16:05.925766 [ 24.509723] xenbr0: port 1(eth0) entered forwarding state Jun 30 06:16:05.925826 [ 24.515548] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready Jun 30 06:16:05.937723 done. Jun 30 06:16:06.157750 Cleaning up temporary files.... Jun 30 06:16:06.229684 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Jun 30 06:16:06.277722 Starting nftables: none Jun 30 06:16:06.337701 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Jun 30 06:16:06.433736 failed! Jun 30 06:16:06.433790 startpar: service(s) returned failure: nftables ... failed! Jun 30 06:16:06.445684 INIT: Entering runlevel: 2 Jun 30 06:16:06.457694 Using makefile-style concurrent boot in runlevel 2. Jun 30 06:16:06.469720 Starting Apache httpd web server: apache2AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.149.64.44. Set the 'ServerName' directive globally to suppress this message Jun 30 06:16:07.297747 . Jun 30 06:16:08.341720 Starting NTP server: ntpd2024-06-30T06:16:09 ntpd[1148]: INIT: ntpd ntpsec-1.2.2: Starting Jun 30 06:16:08.893665 2024-06-30T06:16:09 ntpd[1148]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 30 06:16:08.905618 . Jun 30 06:16:08.905618 Starting SMP IRQ Balancer: irqbalance. Jun 30 06:16:09.121619 Starting system message bus: dbus. Jun 30 06:16:09.337597 Starting OpenBSD Secure Shell server: sshd. Jun 30 06:16:09.977623 Starting /usr/local/sbin/xenstored.... Jun 30 06:16:12.953613 Setting domain 0 name, domid and JSON config... Jun 30 06:16:12.965655 Done setting up Dom0 Jun 30 06:16:12.965655 Starting xenconsoled... Jun 30 06:16:12.965655 Starting QEMU as disk backend for dom0 Jun 30 06:16:12.965655 Jun 30 06:16:14.057631 Debian GNU/Linux 12 arndale-metrocentre hvc0 Jun 30 06:16:14.057631 Jun 30 06:16:14.057631 arndale-metrocentre login: [ 112.094397] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Quota mode: disabled. Jun 30 06:17:33.517653 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 06:17:53.085662 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 06:24:38.460485 [ 630.433229] EXT4-fs (dm-3): unmounting filesystem. Jun 30 06:26:11.848720 [ 637.342946] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Quota mode: disabled. Jun 30 06:26:18.764762 [ 642.337718] EXT4-fs (dm-3): unmounting filesystem. Jun 30 06:26:23.756558 [ 657.707429] xenbr0: port 2(vif1.0) entered blocking state Jun 30 06:26:39.121657 [ 657.711465] xenbr0: port 2(vif1.0) entered disabled state Jun 30 06:26:39.133637 [ 657.717175] device vif1.0 entered promiscuous mode Jun 30 06:26:39.133637 (XEN) d1v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 06:26:40.225651 (XEN) d1v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 06:26:40.244426 [ 659.692146] xen-blkback: backend/vbd/1/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Jun 30 06:26:41.109753 [ 659.819630] xen-blkback: backend/vbd/1/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Jun 30 06:26:41.241603 (XEN) common/grant_table.c:1909:d1v0 Expanding d1 grant table from 1 to 2 frames Jun 30 06:26:41.349569 [ 660.087075] vif vif-1-0 vif1.0: Guest Rx ready Jun 30 06:26:41.505689 [ 660.090716] IPv6: ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready Jun 30 06:26:41.505727 [ 660.096838] xenbr0: port 2(vif1.0) entered blocking state Jun 30 06:26:41.517551 [ 660.103965] xenbr0: port 2(vif1.0) entered forwarding state Jun 30 06:26:41.517649 (XEN) gnttab_mark_dirty not implemented yet Jun 30 06:26:41.553546 [ 707.975752] xenbr0: port 2(vif1.0) entered disabled state Jun 30 06:27:29.389816 [ 708.165330] xenbr0: port 2(vif1.0) entered disabled state Jun 30 06:27:29.581760 [ 708.169690] device vif1.0 left promiscuous mode Jun 30 06:27:29.581823 [ 708.173970] xenbr0: port 2(vif1.0) entered disabled state Jun 30 06:27:29.593699 [ 735.652256] xenbr0: port 2(vif2.0) entered blocking state Jun 30 06:27:57.069678 [ 735.656323] xenbr0: port 2(vif2.0) entered disabled state Jun 30 06:27:57.069678 [ 735.661920] device vif2.0 entered promiscuous mode Jun 30 06:27:57.081658 (XEN) d2v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 06:27:58.149620 (XEN) d2v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 06:27:58.161636 [ 737.576352] xen-blkback: backend/vbd/2/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Jun 30 06:27:58.989805 [ 737.718337] xen-blkback: backend/vbd/2/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Jun 30 06:27:59.133768 (XEN) common/grant_table.c:1909:d2v0 Expanding d2 grant table from 1 to 2 frames Jun 30 06:27:59.241725 [ 738.004104] vif vif-2-0 vif2.0: Guest Rx ready Jun 30 06:27:59.421730 [ 738.007247] IPv6: ADDRCONF(NETDEV_CHANGE): vif2.0: link becomes ready Jun 30 06:27:59.421798 [ 738.013810] xenbr0: port 2(vif2.0) entered blocking state Jun 30 06:27:59.433715 [ 738.019525] xenbr0: port 2(vif2.0) entered forwarding state Jun 30 06:27:59.433778 [ 780.049561] xenbr0: port 2(vif2.0) entered disabled state Jun 30 06:28:41.461789 [ 780.275399] xenbr0: port 2(vif2.0) entered disabled state Jun 30 06:28:41.689787 [ 780.280466] device vif2.0 left promiscuous mode Jun 30 06:28:41.689848 [ 780.284064] xenbr0: port 2(vif2.0) entered disabled state Jun 30 06:28:41.701737 [ 807.084229] xenbr0: port 2(vif3.0) entered blocking state Jun 30 06:29:08.501763 [ 807.088297] xenbr0: port 2(vif3.0) entered disabled state Jun 30 06:29:08.501836 [ 807.093914] device vif3.0 entered promiscuous mode Jun 30 06:29:08.513684 (XEN) d3v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 06:29:09.581798 (XEN) d3v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 06:29:09.593733 [ 809.107755] xen-blkback: backend/vbd/3/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Jun 30 06:29:10.529689 [ 809.193085] xen-blkback: backend/vbd/3/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Jun 30 06:29:10.613714 (XEN) common/grant_table.c:1909:d3v0 Expanding d3 grant table from 1 to 2 frames Jun 30 06:29:10.733831 [ 809.454117] vif vif-3-0 vif3.0: Guest Rx ready Jun 30 06:29:10.865793 [ 809.457981] IPv6: ADDRCONF(NETDEV_CHANGE): vif3.0: link becomes ready Jun 30 06:29:10.877743 [ 809.465990] xenbr0: port 2(vif3.0) entered blocking state Jun 30 06:29:10.877806 [ 809.470809] xenbr0: port 2(vif3.0) entered forwarding state Jun 30 06:29:10.889691 [ 855.076096] xenbr0: port 2(vif3.0) entered disabled state Jun 30 06:29:56.493702 [ 855.275235] xenbr0: port 2(vif3.0) entered disabled state Jun 30 06:29:56.685751 [ 855.279770] device vif3.0 left promiscuous mode Jun 30 06:29:56.697708 [ 855.283879] xenbr0: port 2(vif3.0) entered disabled state Jun 30 06:29:56.697771 [ 882.207888] xenbr0: port 2(vif4.0) entered blocking state Jun 30 06:30:23.624777 [ 882.211921] xenbr0: port 2(vif4.0) entered disabled state Jun 30 06:30:23.624864 [ 882.217614] device vif4.0 entered promiscuous mode Jun 30 06:30:23.636648 (XEN) d4v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 06:30:24.708539 (XEN) d4v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 06:30:24.720540 [ 884.100773] xen-blkback: backend/vbd/4/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Jun 30 06:30:25.512572 [ 884.134871] xen-blkback: backend/vbd/4/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Jun 30 06:30:25.548538 (XEN) common/grant_table.c:1909:d4v0 Expanding d4 grant table from 1 to 2 frames Jun 30 06:30:25.644560 [ 884.430394] vif vif-4-0 vif4.0: Guest Rx ready Jun 30 06:30:25.836595 [ 884.433541] IPv6: ADDRCONF(NETDEV_CHANGE): vif4.0: link becomes ready Jun 30 06:30:25.848706 [ 884.440164] xenbr0: port 2(vif4.0) entered blocking state Jun 30 06:30:25.848765 [ 884.445469] xenbr0: port 2(vif4.0) entered forwarding state Jun 30 06:30:25.860561 [ 926.734451] xenbr0: port 2(vif4.0) entered disabled state Jun 30 06:31:08.144564 [ 926.885426] xenbr0: port 2(vif4.0) entered disabled state Jun 30 06:31:08.300587 [ 926.890405] device vif4.0 left promiscuous mode Jun 30 06:31:08.300587 [ 926.894089] xenbr0: port 2(vif4.0) entered disabled state Jun 30 06:31:08.312528 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 06:31:19.456524 [ 953.721802] xenbr0: port 2(vif5.0) entered blocking state Jun 30 06:31:35.129798 [ 953.725889] xenbr0: port 2(vif5.0) entered disabled state Jun 30 06:31:35.141697 [ 953.731463] device vif5.0 entered promiscuous mode Jun 30 06:31:35.141730 (XEN) d5v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 06:31:36.220390 (XEN) d5v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 06:31:36.244433 [ 955.741247] xen-blkback: backend/vbd/5/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Jun 30 06:31:37.156403 [ 955.820158] xen-blkback: backend/vbd/5/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Jun 30 06:31:37.240387 (XEN) common/grant_table.c:1909:d5v0 Expanding d5 grant table from 1 to 2 frames Jun 30 06:31:37.312416 [ 956.024016] vif vif-5-0 vif5.0: Guest Rx ready Jun 30 06:31:37.432470 [ 956.027463] IPv6: ADDRCONF(NETDEV_CHANGE): vif5.0: link becomes ready Jun 30 06:31:37.444498 [ 956.033767] xenbr0: port 2(vif5.0) entered blocking state Jun 30 06:31:37.444498 [ 956.039121] xenbr0: port 2(vif5.0) entered forwarding state Jun 30 06:31:37.456427 [ 1005.361346] xenbr0: port 2(vif5.0) entered disabled state Jun 30 06:32:26.777761 [ 1005.576869] xenbr0: port 2(vif5.0) entered disabled state Jun 30 06:32:26.993691 [ 1005.582094] device vif5.0 left promiscuous mode Jun 30 06:32:26.993725 [ 1005.585586] xenbr0: port 2(vif5.0) entered disabled state Jun 30 06:32:26.993752 [ 1032.396861] xenbr0: port 2(vif6.0) entered blocking state Jun 30 06:32:53.813590 [ 1032.400894] xenbr0: port 2(vif6.0) entered disabled state Jun 30 06:32:53.813590 [ 1032.406588] device vif6.0 entered promiscuous mode Jun 30 06:32:53.813590 (XEN) d6v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 06:32:54.893624 (XEN) d6v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 06:32:54.910410 [ 1034.302839] xen-blkback: backend/vbd/6/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Jun 30 06:32:55.721573 [ 1034.366038] xen-blkback: backend/vbd/6/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Jun 30 06:32:55.785726 (XEN) common/grant_table.c:1909:d6v0 Expanding d6 grant table from 1 to 2 frames Jun 30 06:32:55.917760 [ 1034.693468] vif vif-6-0 vif6.0: Guest Rx ready Jun 30 06:32:56.109732 [ 1034.696631] IPv6: ADDRCONF(NETDEV_CHANGE): vif6.0: link becomes ready Jun 30 06:32:56.109801 [ 1034.703245] xenbr0: port 2(vif6.0) entered blocking state Jun 30 06:32:56.121703 [ 1034.708573] xenbr0: port 2(vif6.0) entered forwarding state Jun 30 06:32:56.121767 [ 1083.987394] xenbr0: port 2(vif6.0) entered disabled state Jun 30 06:33:45.392596 [ 1084.176875] xenbr0: port 2(vif6.0) entered disabled state Jun 30 06:33:45.584557 [ 1084.187459] device vif6.0 left promiscuous mode Jun 30 06:33:45.596571 [ 1084.190638] xenbr0: port 2(vif6.0) entered disabled state Jun 30 06:33:45.608517 [ 1117.663306] xenbr0: port 2(vif7.0) entered blocking state Jun 30 06:34:19.065807 [ 1117.667394] xenbr0: port 2(vif7.0) entered disabled state Jun 30 06:34:19.077754 [ 1117.672965] device vif7.0 entered promiscuous mode Jun 30 06:34:19.077815 (XEN) d7v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 06:34:20.157861 (XEN) d7v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 06:34:20.169723 [ 1119.578634] xen-blkback: backend/vbd/7/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Jun 30 06:34:20.985831 [ 1119.640235] xen-blkback: backend/vbd/7/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Jun 30 06:34:21.045777 (XEN) common/grant_table.c:1909:d7v0 Expanding d7 grant table from 1 to 2 frames Jun 30 06:34:21.141739 [ 1119.931180] vif vif-7-0 vif7.0: Guest Rx ready Jun 30 06:34:21.333677 [ 1119.934292] IPv6: ADDRCONF(NETDEV_CHANGE): vif7.0: link becomes ready Jun 30 06:34:21.345801 [ 1119.941164] xenbr0: port 2(vif7.0) entered blocking state Jun 30 06:34:21.345859 [ 1119.946275] xenbr0: port 2(vif7.0) entered forwarding state Jun 30 06:34:21.357681 [ 1162.235642] xenbr0: port 2(vif7.0) entered disabled state Jun 30 06:35:03.645765 [ 1162.405273] xenbr0: port 2(vif7.0) entered disabled state Jun 30 06:35:03.813761 [ 1162.409660] device vif7.0 left promiscuous mode Jun 30 06:35:03.833287 [ 1162.413923] xenbr0: port 2(vif7.0) entered disabled state Jun 30 06:35:03.833364 [ 1189.349466] xenbr0: port 2(vif8.0) entered blocking state Jun 30 06:35:30.757877 [ 1189.353502] xenbr0: port 2(vif8.0) entered disabled state Jun 30 06:35:30.769767 [ 1189.359194] device vif8.0 entered promiscuous mode Jun 30 06:35:30.769863 (XEN) d8v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 06:35:31.837772 (XEN) d8v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 06:35:31.849792 [ 1191.289504] xen-blkback: backend/vbd/8/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Jun 30 06:35:32.701645 [ 1191.323267] xen-blkback: backend/vbd/8/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Jun 30 06:35:32.737568 (XEN) common/grant_table.c:1909:d8v0 Expanding d8 grant table from 1 to 2 frames Jun 30 06:35:32.773625 [ 1191.467374] vif vif-8-0 vif8.0: Guest Rx ready Jun 30 06:35:32.881781 [ 1191.470492] IPv6: ADDRCONF(NETDEV_CHANGE): vif8.0: link becomes ready Jun 30 06:35:32.881873 [ 1191.477143] xenbr0: port 2(vif8.0) entered blocking state Jun 30 06:35:32.893695 [ 1191.482429] xenbr0: port 2(vif8.0) entered forwarding state Jun 30 06:35:32.893759 [ 1241.050475] xenbr0: port 2(vif8.0) entered disabled state Jun 30 06:36:22.460579 [ 1241.265355] xenbr0: port 2(vif8.0) entered disabled state Jun 30 06:36:22.676619 [ 1241.270106] device vif8.0 left promiscuous mode Jun 30 06:36:22.676619 [ 1241.274016] xenbr0: port 2(vif8.0) entered disabled state Jun 30 06:36:22.688516 [ 1268.034535] xenbr0: port 2(vif9.0) entered blocking state Jun 30 06:36:49.448589 [ 1268.038601] xenbr0: port 2(vif9.0) entered disabled state Jun 30 06:36:49.448589 [ 1268.044214] device vif9.0 entered promiscuous mode Jun 30 06:36:49.448589 (XEN) d9v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 06:36:50.525762 (XEN) d9v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 06:36:50.537758 [ 1269.976469] xen-blkback: backend/vbd/9/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Jun 30 06:36:51.389613 [ 1270.021711] xen-blkback: backend/vbd/9/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Jun 30 06:36:51.437598 (XEN) common/grant_table.c:1909:d9v0 Expanding d9 grant table from 1 to 2 frames Jun 30 06:36:51.473741 [ 1270.382672] vif vif-9-0 vif9.0: Guest Rx ready Jun 30 06:36:51.785834 [ 1270.385805] IPv6: ADDRCONF(NETDEV_CHANGE): vif9.0: link becomes ready Jun 30 06:36:51.809702 [ 1270.392405] xenbr0: port 2(vif9.0) entered blocking state Jun 30 06:36:51.809779 [ 1270.397767] xenbr0: port 2(vif9.0) entered forwarding state Jun 30 06:36:51.809889 [ 1312.643958] xenbr0: port 2(vif9.0) entered disabled state Jun 30 06:37:34.056500 [ 1312.865326] xenbr0: port 2(vif9.0) entered disabled state Jun 30 06:37:34.276589 [ 1312.870175] device vif9.0 left promiscuous mode Jun 30 06:37:34.276589 [ 1312.873981] xenbr0: port 2(vif9.0) entered disabled state Jun 30 06:37:34.288485 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 06:38:00.693797 [ 1339.697258] xenbr0: port 2(vif10.0) entered blocking state Jun 30 06:38:01.101735 [ 1339.701395] xenbr0: port 2(vif10.0) entered disabled state Jun 30 06:38:01.113742 [ 1339.707132] device vif10.0 entered promiscuous mode Jun 30 06:38:01.113803 (XEN) d10v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 06:38:02.193695 (XEN) d10v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 06:38:02.205700 [ 1341.747747] xen-blkback: backend/vbd/10/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Jun 30 06:38:03.165674 [ 1341.867526] xen-blkback: backend/vbd/10/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Jun 30 06:38:03.285686 (XEN) common/grant_table.c:1909:d10v0 Expanding d10 grant table from 1 to 2 frames Jun 30 06:38:03.321702 [ 1342.099926] vif vif-10-0 vif10.0: Guest Rx ready Jun 30 06:38:03.513751 [ 1342.103223] IPv6: ADDRCONF(NETDEV_CHANGE): vif10.0: link becomes ready Jun 30 06:38:03.513817 [ 1342.110032] xenbr0: port 2(vif10.0) entered blocking state Jun 30 06:38:03.525705 [ 1342.115557] xenbr0: port 2(vif10.0) entered forwarding state Jun 30 06:38:03.525768 [ 1384.335682] xenbr0: port 2(vif10.0) entered disabled state Jun 30 06:38:45.749591 [ 1384.555337] xenbr0: port 2(vif10.0) entered disabled state Jun 30 06:38:45.965603 [ 1384.560228] device vif10.0 left promiscuous mode Jun 30 06:38:45.965603 [ 1384.564165] xenbr0: port 2(vif10.0) entered disabled state Jun 30 06:38:45.977550 [ 1411.295736] xenbr0: port 2(vif11.0) entered blocking state Jun 30 06:39:12.709769 [ 1411.299852] xenbr0: port 2(vif11.0) entered disabled state Jun 30 06:39:12.709846 [ 1411.305618] device vif11.0 entered promiscuous mode Jun 30 06:39:12.709894 (XEN) d11v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 06:39:13.789716 (XEN) d11v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 06:39:13.801686 [ 1413.262577] xen-blkback: backend/vbd/11/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Jun 30 06:39:14.677737 [ 1413.328295] xen-blkback: backend/vbd/11/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Jun 30 06:39:14.737735 (XEN) common/grant_table.c:1909:d11v0 Expanding d11 grant table from 1 to 2 frames Jun 30 06:39:14.833731 [ 1413.533078] vif vif-11-0 vif11.0: Guest Rx ready Jun 30 06:39:14.941751 [ 1413.536394] IPv6: ADDRCONF(NETDEV_CHANGE): vif11.0: link becomes ready Jun 30 06:39:14.941816 [ 1413.543055] xenbr0: port 2(vif11.0) entered blocking state Jun 30 06:39:14.953730 [ 1413.548796] xenbr0: port 2(vif11.0) entered forwarding state Jun 30 06:39:14.953793 [ 1455.617511] xenbr0: port 2(vif11.0) entered disabled state Jun 30 06:39:57.029644 [ 1455.755324] xenbr0: port 2(vif11.0) entered disabled state Jun 30 06:39:57.161711 [ 1455.760105] device vif11.0 left promiscuous mode Jun 30 06:39:57.161744 [ 1455.764141] xenbr0: port 2(vif11.0) entered disabled state Jun 30 06:39:57.173662 [ 1483.403970] xenbr0: port 2(vif12.0) entered blocking state Jun 30 06:40:24.813815 [ 1483.408142] xenbr0: port 2(vif12.0) entered disabled state Jun 30 06:40:24.813902 [ 1483.413831] device vif12.0 entered promiscuous mode Jun 30 06:40:24.813950 (XEN) d12v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 06:40:25.893762 (XEN) d12v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 06:40:25.905724 [ 1485.064842] xen-blkback: backend/vbd/12/51714: using 1 queues, protocol 1 (arm-abi) persistent grants Jun 30 06:40:26.481734 [ 1485.166395] xen-blkback: backend/vbd/12/51713: using 1 queues, protocol 1 (arm-abi) persistent grants Jun 30 06:40:26.577775 (XEN) common/grant_table.c:1909:d12v0 Expanding d12 grant table from 1 to 2 frames Jun 30 06:40:26.652532 [ 1485.483290] vif vif-12-0 vif12.0: Guest Rx ready Jun 30 06:40:26.884478 [ 1485.486784] IPv6: ADDRCONF(NETDEV_CHANGE): vif12.0: link becomes ready Jun 30 06:40:26.896543 [ 1485.493334] xenbr0: port 2(vif12.0) entered blocking state Jun 30 06:40:26.896543 [ 1485.498814] xenbr0: port 2(vif12.0) entered forwarding state Jun 30 06:40:26.908472 [ 1525.263346] xenbr0: port 2(vif12.0) entered disabled state Jun 30 06:41:06.664579 [ 1525.365467] xenbr0: port 2(vif12.0) entered disabled state Jun 30 06:41:06.776594 [ 1525.370316] device vif12.0 left promiscuous mode Jun 30 06:41:06.776594 [ 1525.374302] xenbr0: port 2(vif12.0) entered disabled state Jun 30 06:41:06.788520 Jun 30 06:41:26.252812 (XEN) *** Serial input to Xen (type 'CTRL-x' three times to switch input) Jun 30 06:41:26.277709 Jun 30 06:41:26.278691 Jun 30 06:41:27.240992 (XEN) '0' pressed -> dumping Dom0's registers Jun 30 06:41:27.265664 (XEN) *** Dumping Dom0 vcpu#0 state: *** Jun 30 06:41:27.265695 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Jun 30 06:41:27.266924 Not tainted ]---- Jun 30 06:41:27.277697 (XEN) CPU: 0 Jun 30 06:41:27.277737 (XEN) PC: c031ce28 Jun 30 06:41:27.277764 (XEN) CPSR: 60030093 MODE:32-bit Guest SVC Jun 30 06:41:27.277789 (XEN) R0: 00000005 R1: 00000000 R2: 004a1579 R3: c031ce20 Jun 30 06:41:27.289657 (XEN) R4: c1909d80 R5: c1b12280 R6: c1904d1c R7: c1904d78 Jun 30 06:41:27.289694 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c80 Jun 30 06:41:27.301649 (XEN) USR: SP: beef8948 LR: b6bbd853 Jun 30 06:41:27.301678 (XEN) SVC: SP: c1901f40 LR: c0308df0 SPSR:60030013 Jun 30 06:41:27.301703 (XEN) ABT: SP: c1b22b10 LR: c03011c0 SPSR:600d0193 Jun 30 06:41:27.313636 (XEN) UND: SP: c1b22b20 LR: c0300fa0 SPSR:60030093 Jun 30 06:41:27.313666 (XEN) IRQ: SP: c1b22b00 LR: c0300ba0 SPSR:60030193 Jun 30 06:41:27.325646 (XEN) FIQ: SP: c1b22b30 LR: c1b22b30 SPSR:00000000 Jun 30 06:41:27.325687 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Jun 30 06:41:27.325733 (XEN) Jun 30 06:41:27.337681 (XEN) SCTLR: 10c5387d Jun 30 06:41:27.337713 (XEN) TCR: 00000000 Jun 30 06:41:27.337737 (XEN) TTBR0: 000000006422006a Jun 30 06:41:27.337760 (XEN) TTBR1: 000000006020406a Jun 30 06:41:27.337783 (XEN) IFAR: b6e1feb8, IFSR: 00000007 Jun 30 06:41:27.349691 (XEN) DFAR: b6b10691, DFSR: 00000017 Jun 30 06:41:27.349723 (XEN) Jun 30 06:41:27.349745 (XEN) VTCR_EL2: 80003558 Jun 30 06:41:27.349768 (XEN) VTTBR_EL2: 00010000bef8a000 Jun 30 06:41:27.361673 (XEN) Jun 30 06:41:27.361698 (XEN) SCTLR_EL2: 30cd187f Jun 30 06:41:27.361722 (XEN) HCR_EL2: 007c663f Jun 30 06:41:27.361745 (XEN) TTBR0_EL2: 0000000041115000 Jun 30 06:41:27.361768 (XEN) Jun 30 06:41:27.361788 (XEN) ESR_EL2: 07e00000 Jun 30 06:41:27.373634 (XEN) HPFAR_EL2: 00104810 Jun 30 06:41:27.373680 (XEN) HDFAR: e0807f00 Jun 30 06:41:27.373704 (XEN) HIFAR: c0a18fe0 Jun 30 06:41:27.373727 (XEN) Jun 30 06:41:27.373749 (XEN) Guest stack trace from sp=c1901f40: Jun 30 06:41:27.385632 (XEN) Failed to convert stack to physical address Jun 30 06:41:27.385662 (XEN) *** Dumping Dom0 vcpu#1 state: *** Jun 30 06:41:27.385687 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Not tainted ]---- Jun 30 06:41:27.397661 (XEN) CPU: 0 Jun 30 06:41:27.397688 (XEN) PC: c031ce28 Jun 30 06:41:27.397710 (XEN) CPSR: 60070093 MODE:32-bit Guest SVC Jun 30 06:41:27.397735 (XEN) R0: 00000005 R1: 00000000 R2: 00377e01 R3: c031ce20 Jun 30 06:41:27.409676 (XEN) R4: c210e600 R5: c1b12280 R6: c1904d1c R7: c1904d78 Jun 30 06:41:27.409710 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c80 Jun 30 06:41:27.421691 (XEN) USR: SP: bef5c970 LR: b6e84685 Jun 30 06:41:27.421722 (XEN) SVC: SP: e08c9f90 LR: c0308df0 SPSR:60070013 Jun 30 06:41:27.421748 (XEN) ABT: SP: c1b22b50 LR: c0300ea0 SPSR:600f0193 Jun 30 06:41:27.433663 (XEN) UND: SP: c1b22b60 LR: c0300fa0 SPSR:60030093 Jun 30 06:41:27.433696 (XEN) IRQ: SP: c1b22b40 LR: c0300ba0 SPSR:60070193 Jun 30 06:41:27.445683 (XEN) FIQ: SP: c1b22b70 LR: c1b22b70 SPSR:00000000 Jun 30 06:41:27.445716 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Jun 30 06:41:27.457710 (XEN) Jun 30 06:41:27.457739 (XEN) SCTLR: 10c5387d Jun 30 06:41:27.457762 (XEN) TCR: 00000000 Jun 30 06:41:27.457785 (XEN) TTBR0: 0000000063a3406a Jun 30 06:41:27.457808 (XEN) TTBR1: 000000006020406a Jun 30 06:41:27.469704 (XEN) IFAR: b6e1b858, IFSR: 00000007 Jun 30 06:41:27.469762 (XEN) DFAR: 004d3318, DFSR: 0000081f Jun 30 06:41:27.469808 (XEN) Jun 30 06:41:27.469845 (XEN) VTCR_EL2: 80003558 Jun 30 06:41:27.469887 (XEN) VTTBR_EL2: 00010000bef8a000 Jun 30 06:41:27.481706 (XEN) Jun 30 06:41:27.481759 (XEN) SCTLR_EL2: 30cd187f Jun 30 06:41:27.481802 (XEN) HCR_EL2: 007c663f Jun 30 06:41:27.481843 (XEN) TTBR0_EL2: 0000000041115000 Jun 30 06:41:27.481884 (XEN) Jun 30 06:41:27.481922 (XEN) ESR_EL2: 07e00000 Jun 30 06:41:27.493704 (XEN) HPFAR_EL2: 00104810 Jun 30 06:41:27.493759 (XEN) HDFAR: e0807f00 Jun 30 06:41:27.493802 (XEN) HIFAR: c0a18fe0 Jun 30 06:41:27.493842 (XEN) Jun 30 06:41:27.493879 (XEN) Guest stack trace from sp=e08c9f90: Jun 30 06:41:27.505640 (XEN) Failed to convert stack to physical address Jun 30 06:41:27.505673 Jun 30 06:41:29.266596 (XEN) 'H' pressed -> dumping heap info (now = 1553162910666) Jun 30 06:41:29.289721 (XEN) heap[node=0][zone=0] -> 16281 pages Jun 30 06:41:29.289753 (XEN) heap[node=0][zone=1] -> 0 Jun 30 06:41:29.291981 pages Jun 30 06:41:29.301681 (XEN) heap[node=0][zone=2] -> 0 pages Jun 30 06:41:29.301711 (XEN) heap[node=0][zone=3] -> 0 pages Jun 30 06:41:29.301735 (XEN) heap[node=0][zone=4] -> 0 pages Jun 30 06:41:29.301758 (XEN) heap[node=0][zone=5] -> 0 pages Jun 30 06:41:29.313726 (XEN) heap[node=0][zone=6] -> 0 pages Jun 30 06:41:29.313758 (XEN) heap[node=0][zone=7] -> 0 pages Jun 30 06:41:29.313781 (XEN) heap[node=0][zone=8] -> 0 pages Jun 30 06:41:29.325706 (XEN) heap[node=0][zone=9] -> 0 pages Jun 30 06:41:29.325738 (XEN) heap[node=0][zone=10] -> 0 pages Jun 30 06:41:29.325762 (XEN) heap[node=0][zone=11] -> 0 pages Jun 30 06:41:29.325786 (XEN) heap[node=0][zone=12] -> 0 pages Jun 30 06:41:29.337692 (XEN) heap[node=0][zone=13] -> 0 pages Jun 30 06:41:29.337724 (XEN) heap[node=0][zone=14] -> 0 pages Jun 30 06:41:29.337748 (XEN) heap[node=0][zone=15] -> 0 pages Jun 30 06:41:29.349692 (XEN) heap[node=0][zone=16] -> 0 pages Jun 30 06:41:29.349724 (XEN) heap[node=0][zone=17] -> 0 pages Jun 30 06:41:29.349748 (XEN) heap[node=0][zone=18] -> 0 pages Jun 30 06:41:29.349771 (XEN) heap[node=0][zone=19] -> 130812 pages Jun 30 06:41:29.361685 (XEN) heap[node=0][zone=20] -> 241609 pages Jun 30 06:41:29.361717 (XEN) heap[node=0][zone=21] -> 0 pages Jun 30 06:41:29.361741 (XEN) heap[node=0][zone=22] -> 0 pages Jun 30 06:41:29.373685 (XEN) heap[node=0][zone=23] -> 0 pages Jun 30 06:41:29.373717 (XEN) heap[node=0][zone=24] -> 0 pages Jun 30 06:41:29.373741 (XEN) heap[node=0][zone=25] -> 0 pages Jun 30 06:41:29.385670 (XEN) heap[node=0][zone=26] -> 0 pages Jun 30 06:41:29.385702 (XEN) heap[node=0][zone=27] -> 0 pages Jun 30 06:41:29.385726 (XEN) heap[node=0][zone=28] -> 0 pages Jun 30 06:41:29.385750 Jun 30 06:41:31.246236 Jun 30 06:41:33.057087 Jun 30 06:41:33.257800 Jun 30 06:41:35.065844 Jun 30 06:41:35.308518 (XEN) Dumping timer queues: Jun 30 06:41:35.325773 (XEN) CPU00: Jun 30 06:41:35.325809 (XEN) ex= 196282us timer=43fdc968 cb=arch/arm/vtimer.c#virt_timer_expired(43fdc960) Jun 30 06:41:35.325809 ( Jun 30 06:41:35.327918 XEN) CPU01: Jun 30 06:41:35.341763 (XEN) ex= 47670us timer=43fef968 cb=arch/arm/vtimer.c#virt_timer_expired(43fef960) Jun 30 06:41:35.341838 Jun 30 06:41:37.310537 Jun 30 06:41:39.074254 Jun 30 06:41:39.320582 (XEN) 'd' pressed -> dumping registers Jun 30 06:41:39.337798 (XEN) Jun 30 06:41:39.337850 (XEN) *** Dumping CPU0 host state: *** Jun 30 06:41:39.337895 (XEN) ----[ Xen-4.19-unstable arm32 debug=y N Jun 30 06:41:39.340203 ot tainted ]---- Jun 30 06:41:39.349704 (XEN) CPU: 0 Jun 30 06:41:39.349755 (XEN) PC: 0026991c arch/arm/domain.c#idle_loop+0x134/0x1b0 Jun 30 06:41:39.349805 (XEN) CPSR: 6007005a MODE:Hypervisor Jun 30 06:41:39.361753 (XEN) R0: 00000000 R1: 002b6380 R2: 00000000 R3: 00000000 Jun 30 06:41:39.361815 (XEN) R4: 00000000 R5: 00308108 R6: 0033c33c R7: 00000001 Jun 30 06:41:39.361865 (XEN) R8: 00339108 R9: 00000000 R10:40e00000 R11:4003ff54 R12:fffffffc Jun 30 06:41:39.373754 (XEN) HYP: SP: 4003ff44 LR: 0022c434 Jun 30 06:41:39.373811 (XEN) Jun 30 06:41:39.373850 (XEN) VTCR_EL2: 80003558 Jun 30 06:41:39.385693 (XEN) VTTBR_EL2: 00010000bef8a000 Jun 30 06:41:39.385693 (XEN) Jun 30 06:41:39.385693 (XEN) SCTLR_EL2: 30cd187f Jun 30 06:41:39.385693 (XEN) HCR_EL2: 007c663f Jun 30 06:41:39.385693 (XEN) TTBR0_EL2: 0000000041115000 Jun 30 06:41:39.397679 (XEN) Jun 30 06:41:39.397679 (XEN) ESR_EL2: 07e00000 Jun 30 06:41:39.397679 (XEN) HPFAR_EL2: 00104810 Jun 30 06:41:39.397679 (XEN) HDFAR: e0807f00 Jun 30 06:41:39.397679 (XEN) HIFAR: c0a18fe0 Jun 30 06:41:39.397679 (XEN) Jun 30 06:41:39.397679 (XEN) Xen stack trace from sp=4003ff44: Jun 30 06:41:39.409646 (XEN) 07e00000 002ac008 002a0f34 4003ff4c 002725d0 00000000 00000000 00000000 Jun 30 06:41:39.409646 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 06:41:39.421766 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 06:41:39.433754 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 06:41:39.433818 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 06:41:39.445744 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 06:41:39.445804 (XEN) Xen call trace: Jun 30 06:41:39.445846 (XEN) [<0026991c>] arch/arm/domain.c#idle_loop+0x134/0x1b0 (PC) Jun 30 06:41:39.457782 (XEN) [<0022c434>] rcu_needs_cpu+0x40/0x60 (LR) Jun 30 06:41:39.457842 (XEN) [<002725d0>] arch_get_xen_caps+0/0x90 Jun 30 06:41:39.469743 (XEN) Jun 30 06:41:39.469795 (XEN) *** Dumping CPU1 host state: *** Jun 30 06:41:39.469840 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Not tainted ]---- Jun 30 06:41:39.469888 (XEN) CPU: 1 Jun 30 06:41:39.481756 (XEN) PC: 0026991c arch/arm/domain.c#idle_loop+0x134/0x1b0 Jun 30 06:41:39.481819 (XEN) CPSR: 6003005a MODE:Hypervisor Jun 30 06:41:39.481864 (XEN) R0: 00000000 R1: 002b6380 R2: 3fcfe000 R3: 00000000 Jun 30 06:41:39.493753 (XEN) R4: 00000001 R5: 00308108 R6: 0033c33c R7: 00000002 Jun 30 06:41:39.493814 (XEN) R8: 00339108 R9: 00000001 R10:40e00000 R11:4000ff54 R12:fffffffc Jun 30 06:41:39.505756 (XEN) HYP: SP: 4000ff44 LR: 0022c434 Jun 30 06:41:39.505813 (XEN) Jun 30 06:41:39.505853 (XEN) VTCR_EL2: 80003558 Jun 30 06:41:39.505894 (XEN) VTTBR_EL2: 00010000bef8a000 Jun 30 06:41:39.517758 (XEN) Jun 30 06:41:39.517810 (XEN) SCTLR_EL2: 30cd187f Jun 30 06:41:39.517853 (XEN) HCR_EL2: 007c663f Jun 30 06:41:39.517894 (XEN) TTBR0_EL2: 00000000ba004000 Jun 30 06:41:39.517936 (XEN) Jun 30 06:41:39.517972 (XEN) ESR_EL2: 07e00000 Jun 30 06:41:39.529754 (XEN) HPFAR_EL2: 00104810 Jun 30 06:41:39.529810 (XEN) HDFAR: e0807f00 Jun 30 06:41:39.529852 (XEN) HIFAR: c0a18fe0 Jun 30 06:41:39.529893 (XEN) Jun 30 06:41:39.529930 (XEN) Xen stack trace from sp=4000ff44: Jun 30 06:41:39.541743 (XEN) 07e00000 00309390 00000001 4000ff3c 00272eac 00000000 00000000 00000000 Jun 30 06:41:39.541806 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 06:41:39.553772 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 06:41:39.553835 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 06:41:39.565752 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 06:41:39.565814 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 06:41:39.577768 (XEN) Xen call trace: Jun 30 06:41:39.577823 (XEN) [<0026991c>] arch/arm/domain.c#idle_loop+0x134/0x1b0 (PC) Jun 30 06:41:39.589753 (XEN) [<0022c434>] rcu_needs_cpu+0x40/0x60 (LR) Jun 30 06:41:39.589814 (XEN) [<00272eac>] start_secondary+0x208/0x20c Jun 30 06:41:39.589860 (XEN) Jun 30 06:41:39.589898 Jun 30 06:41:41.316288 (XEN) 'e' pressed -> dumping event-channel info Jun 30 06:41:41.333797 (XEN) Event channel information for domain 0: Jun 30 06:41:41.333857 (XEN) Polling vCPUs: {} Jun 30 06:41:41.333899 (XEN) port Jun 30 06:41:41.336201 [p/m/s] Jun 30 06:41:41.345712 (XEN) 1 [0/0/ - ]: s=3 n=1 x=0 d=0 p=4 Jun 30 06:41:41.345768 (XEN) 2 [0/0/ - ]: s=5 n=0 x=0 v=2 Jun 30 06:41:41.345813 (XEN) 3 [0/0/ - ]: s=5 n=1 x=0 v=3 Jun 30 06:41:41.357720 (XEN) 4 [0/0/ - ]: s=3 n=0 x=0 d=0 p=1 Jun 30 06:41:41.357779 Jun 30 06:41:43.323800 (XEN) gnttab_usage_print_all [ key 'g' pressed Jun 30 06:41:43.341837 (XEN) -------- active -------- Jun 30 06:41:43.343473 -------- shared -------- Jun 30 06:41:43.357747 (XEN) [ref] localdom mfn pin localdom gmfn flags Jun 30 06:41:43.357805 (XEN) grant-table for remote d0 (v1) Jun 30 06:41:43.357849 (XEN) 1 frames (64 max), 3 maptrack frames (1024 max) Jun 30 06:41:43.369713 (XEN) no active grant table entries Jun 30 06:41:43.369772 (XEN) gnttab_usage_print_all ] done Jun 30 06:41:43.369816 Jun 30 06:41:45.319421 Jun 30 06:41:47.085670 Jun 30 06:41:47.403324 (XEN) Physical memory information: Jun 30 06:41:47.421797 (XEN) Xen heap: 65124kB free Jun 30 06:41:47.421855 (XEN) heap[19]: 523248kB free Jun 30 06:41:47.421898 (XEN) heap[20]: 966436kB fr Jun 30 06:41:47.424240 ee Jun 30 06:41:47.433689 (XEN) Dom heap: 1489684kB free Jun 30 06:41:47.433747 Jun 30 06:41:49.399760 Jun 30 06:41:51.166341 Jun 30 06:41:51.400975 (XEN) sched_smt_power_savings: disabled Jun 30 06:41:51.425795 (XEN) NOW=1575299139375 Jun 30 06:41:51.425856 (XEN) Online Cpus: 0-1 Jun 30 06:41:51.425897 (XEN) Cpupool 0: Jun 30 06:41:51.425937 (XEN) Cpus: 0-1 Jun 30 06:41:51.425975 (XEN) Sched Jun 30 06:41:51.428186 uling granularity: cpu, 1 CPU per sched-resource Jun 30 06:41:51.437735 (XEN) Scheduler: SMP Credit Scheduler rev2 (credit2) Jun 30 06:41:51.437792 (XEN) Active queues: 1 Jun 30 06:41:51.437833 (XEN) default-weight = 256 Jun 30 06:41:51.449803 (XEN) Runqueue 0: Jun 30 06:41:51.449857 (XEN) ncpus = 2 Jun 30 06:41:51.449900 (XEN) cpus = 0-1 Jun 30 06:41:51.449942 (XEN) max_weight = 256 Jun 30 06:41:51.461755 (XEN) pick_bias = 0 Jun 30 06:41:51.461814 (XEN) instload = 0 Jun 30 06:41:51.461857 (XEN) aveload = 1527 (~0%) Jun 30 06:41:51.461900 (XEN) idlers: 2 Jun 30 06:41:51.461940 (XEN) tickled: 0 Jun 30 06:41:51.473765 (XEN) fully idle cores: 2 Jun 30 06:41:51.473822 (XEN) Domain info: Jun 30 06:41:51.473864 (XEN) Domain: 0 w 256 c 0 v 2 Jun 30 06:41:51.473906 (XEN) 1: [0.0] flags=0 cpu=1 credit=3612443 [w=256] load=1459 (~0%) Jun 30 06:41:51.485806 (XEN) 2: [0.1] flags=0 cpu=0 credit=10141625 [w=256] load=95 (~0%) Jun 30 06:41:51.485872 (XEN) Runqueue 0: Jun 30 06:41:51.485913 (XEN) CPU[00] runq=0, sibling={0}, core={0-1} Jun 30 06:41:51.497806 (XEN) CPU[01] runq=0, sibling={1}, core={0-1} Jun 30 06:41:51.497866 (XEN) RUNQ: Jun 30 06:41:51.497907 (XEN) CPUs info: Jun 30 06:41:51.497946 (XEN) CPU[00] current=d[IDLE]v0, curr=d[IDLE]v0, prev=NULL Jun 30 06:41:51.509788 (XEN) CPU[01] current=d[IDLE]v1, curr=d[IDLE]v1, prev=NULL Jun 30 06:41:51.509850 Jun 30 06:41:53.357130 Jun 30 06:41:55.173107 Jun 30 06:41:55.400044 (XEN) Synced stime skew: max=83ns avg=83ns samples=1 current=83ns Jun 30 06:41:55.417780 (XEN) Synced cycles skew: max=1 avg=1 samples=1 current=1 Jun 30 06:41:55.417841 Jun 30 06:41:55.419992 Jun 30 06:41:57.414713 Jun 30 06:41:59.181838 Jun 30 06:41:59.422574 Jun 30 06:42:01.190723 Jun 30 06:42:01.424023 Jun 30 06:42:03.198025 Jun 30 06:42:13.438166 (XEN) 'q' pressed -> dumping domain info (now = 1597332406458) Jun 30 06:42:13.461819 (XEN) General information for domain 0: Jun 30 06:42:13.461881 (XEN) refcnt=3 dying=0 paus Jun 30 06:42:13.464179 e_count=0 Jun 30 06:42:13.473695 (XEN) nr_pages=131072 xenheap_pages=2 dirty_cpus={} max_pages=131072 Jun 30 06:42:13.473758 (XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=00000020 Jun 30 06:42:13.485736 (XEN) p2m mappings for domain 0 (vmid 1): Jun 30 06:42:13.485795 (XEN) 1G mappings: 0 (shattered 0) Jun 30 06:42:13.485841 (XEN) 2M mappings: 240 (shattered 16) Jun 30 06:42:13.497748 (XEN) 4K mappings: 3228 Jun 30 06:42:13.497805 (XEN) Rangesets belonging to domain 0: Jun 30 06:42:13.497851 (XEN) Interrupts { 32-72, 74, 77-79, 82-84, 86, 88-100, 103-104, 107-110, 114, 116-120, 123, 126-128, 138, 144, 146-147, 149-151, 156 } Jun 30 06:42:13.509774 (XEN) I/O Memory { 2020-2050, 3810-3811, 3830-3831, 3860-3861, 10000-10001, 10010-10045, 10050-10055, 10060-10061, 101b0-101b1, 101d0-101d1, 101e0-101e1, 10440-10441, 10800-10801, 10830-10831, 10850-10851, 10a60-10a61, 10d10-10d11, 11000-11010, 11200-11201, 11210-11211, 11400-11401, 11800-11805, 11c00-11c01, 11c10-11c11, 11d40-11d41, 11f20-11f21, 12000-12010, 12100-12101, 12110-12111, 12120-12121, 12130-12131, 12170-12171, 121a0-121a1, 121b0-121b1, 121d0-121d1, 12200-12201, 12210-12211, 12220-12221, 12230-12231, 12250-12251, 122f0-122f1, 12c00-12c01, 12c10-12c11, 12c30-12c31, 12c60-12c61, 12c70-12c71, 12c80-12c81, 12c90-12c91, 12ca0-12ca1, 12cb0-12cb1, 12cc0-12cc1, 12cd0-12cd1, 12ce0-12ce1, 12d10-12d11, 12d20-12d21, 12d30-12d31, 12d40-12d41, 12d60-12d61, 12d70-12d71, 12dd0-12dd1, 13260-13261, 13270-13271, 13280-13281, 13290-13291, 132a0-132a1, 132b0-132b1, 132c0-132c1, 132d0-132d1, 132e0-132e1, 132f0-132f1, 13400-13401, 13c40-13c41, 13c50-13c51, 13e00-13e01, 13e10-13e11, 13e20-13e21, 13e30-13e31, 13e80-13e81, 13e90-13e91, 13ea0-13ea1, 13eb0-13eb1, 14400-14440, 14450-14460, 14500-14510, 14530-145a0, 145b0-145b1, 14640-14641, 14650-14651 } Jun 30 06:42:13.605772 (XEN) NODE affinity for domain 0: [0] Jun 30 06:42:13.617751 (XEN) VCPU information and callbacks for domain 0: Jun 30 06:42:13.617812 (XEN) UNIT0 affinities: hard={0-1} soft={0-1} Jun 30 06:42:13.617860 (XEN) VCPU0: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Jun 30 06:42:13.629750 (XEN) pause_count=0 pause_flags=1 Jun 30 06:42:13.629809 (XEN) GICH_LRs (vcpu 0) mask=0 Jun 30 06:42:13.629853 (XEN) VCPU_LR[0]=0 Jun 30 06:42:13.641795 (XEN) VCPU_LR[1]=0 Jun 30 06:42:13.641877 (XEN) VCPU_LR[2]=0 Jun 30 06:42:13.641922 (XEN) VCPU_LR[3]=0 Jun 30 06:42:13.641962 (XEN) No periodic timer Jun 30 06:42:13.642004 (XEN) UNIT1 affinities: hard={0-1} soft={0-1} Jun 30 06:42:13.653749 (XEN) VCPU1: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Jun 30 06:42:13.653811 (XEN) pause_count=0 pause_flags=1 Jun 30 06:42:13.653861 (XEN) GICH_LRs (vcpu 1) mask=0 Jun 30 06:42:13.665742 (XEN) VCPU_LR[0]=0 Jun 30 06:42:13.665796 (XEN) VCPU_LR[1]=0 Jun 30 06:42:13.665838 (XEN) VCPU_LR[2]=0 Jun 30 06:42:13.665878 (XEN) VCPU_LR[3]=0 Jun 30 06:42:13.665917 (XEN) No periodic timer Jun 30 06:42:13.677712 (XEN) Notifying guest 0:0 (virq 1, port 0) Jun 30 06:42:13.677771 (XEN) Notifying guest 0:1 (virq 1, port 0) Jun 30 06:42:13.677816 Jun 30 06:42:25.430241 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 30 06:42:25.449782 Jun 30 06:42:25.449831 arndale-metrocentre login: Jun 30 06:42:25.451655 [ 1676.241578] sd 0:0:0:0: [sda] Synchronizing SCSI cache Jun 30 06:43:37.641752 [ 1676.251268] wake enabled for irq 119 (gpx1-4) Jun 30 06:43:37.653731 [ 1676.254255] wake enabled for irq 120 (gpx1-5) Jun 30 06:43:37.665746 [ 1676.258742] wake enabled for irq 121 (gpx1-6) Jun 30 06:43:37.665808 [ 1676.263107] wake enabled for irq 122 (gpx1-7) Jun 30 06:43:37.665855 [ 1676.267552] wake enabled for irq 123 (gpx2-0) Jun 30 06:43:37.677728 [ 1676.271961] wake enabled for irq 124 (gpx2-1) Jun 30 06:43:37.677789 [ 1676.276892] reboot: Resô Jun 30 06:43:38.013713 Jun 30 06:43:38.013736 Jun 30 06:43:38.013801 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 06:43:38.025754 Jun 30 06:43:38.025806 CPU: Exynos5250@1000MHz Jun 30 06:43:38.025850 Jun 30 06:43:38.025887 Board: Arndale Jun 30 06:43:38.025929 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 06:43:38.025976 ready Jun 30 06:43:38.026015 DRAM: 2 GiB Jun 30 06:43:38.037680 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 06:43:38.049713 trace: enabled Jun 30 06:43:38.085698 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 06:43:38.445703 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 06:43:38.505737 In: serial Jun 30 06:43:38.505791 Out: serial Jun 30 06:43:38.505832 Err: serial Jun 30 06:43:38.505872 SCSI: ARNDALE SCSI INIT Jun 30 06:43:38.505915 Target spinup took 0 ms. Jun 30 06:43:38.517731 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 06:43:38.517793 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 06:43:38.529756 Net: Net Initialization Skipped Jun 30 06:43:38.529814 No ethernet found. Jun 30 06:43:38.529856 Hostname: arndale-metrocentre Jun 30 06:43:38.529899 Hit any key to stop autoboot: 2  1  0 Jun 30 06:43:40.461753 (Re)start USB... Jun 30 06:43:40.461826 USB0: USB EHCI 1.00 Jun 30 06:43:40.461869 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 06:43:46.057771 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 06:43:46.069710 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 06:43:46.513789 Waiting for Ethernet connection... done. Jun 30 06:43:48.157704 BOOTP broadcast 1 Jun 30 06:43:48.157778 EHCI timed out on TD - token=0x8008d80 Jun 30 06:43:52.957476 BOOTP broadcast 2 Jun 30 06:43:52.969506 DHCP client bound to address 10.149.64.44 (5006 ms) Jun 30 06:43:52.969506 Using asx0 device Jun 30 06:43:52.969506 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 06:43:52.981470 Filename 'pxelinux.0'. Jun 30 06:43:52.981470 Load address: 0x43e00000 Jun 30 06:43:52.981470 Loading: *### Jun 30 06:43:52.993450 2.2 MiB/s Jun 30 06:43:52.993450 done Jun 30 06:43:52.993450 Bytes transferred = 42430 (a5be hex) Jun 30 06:43:53.005517 missing environment variable: pxeuuid Jun 30 06:43:53.005611 Retrieving file: pxelinux.cfg/0A95402C Jun 30 06:43:53.005611 Using asx0 device Jun 30 06:43:53.005611 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 06:43:53.017503 Filename 'pxelinux.cfg/0A95402C'. Jun 30 06:43:53.017503 Load address: 0x51000000 Jun 30 06:43:53.017503 Loading: *# Jun 30 06:43:53.017503 358.4 KiB/s Jun 30 06:43:53.029507 done Jun 30 06:43:53.029507 Bytes transferred = 734 (2de hex) Jun 30 06:43:53.029507 Config file found Jun 30 06:43:53.029507 Ignoring unknown command: serial Jun 30 06:43:53.029507 1: ^Overwrite Jun 30 06:43:53.029507 Retrieving file: /osstest/tmp//arndale-metrocentre--initrd.gz Jun 30 06:43:53.041506 Using asx0 device Jun 30 06:43:53.041506 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 06:43:53.041506 Filename '/osstest/tmp//arndale-metrocentre--initrd.gz'. Jun 30 06:43:53.053484 Load address: 0x43300000 Jun 30 06:43:53.053484 Loading: *################################################################# Jun 30 06:43:53.377444 ################################################################# Jun 30 06:43:53.701595 ################################################################# Jun 30 06:43:54.025635 ################################################################# Jun 30 06:43:54.353681 ################################################################# Jun 30 06:43:54.677658 ################################################################# Jun 30 06:43:55.001652 ################################################################# Jun 30 06:43:55.333482 ################################################################# Jun 30 06:43:55.653670 ################################################################# Jun 30 06:43:55.977683 ################################################################# Jun 30 06:43:56.301749 ################################################################# Jun 30 06:43:56.625672 ################################################################# Jun 30 06:43:56.949700 ################################################################# Jun 30 06:43:57.285676 ################################################################# Jun 30 06:43:57.609668 ################################################################# Jun 30 06:43:57.933677 ################################################################# Jun 30 06:43:58.257670 ################################################################# Jun 30 06:43:58.585669 ################################################################# Jun 30 06:43:58.909664 ################################################################# Jun 30 06:43:59.221654 ################################################################# Jun 30 06:43:59.521663 ################################################################# Jun 30 06:43:59.821680 ################################################################# Jun 30 06:44:00.121717 ################################################################# Jun 30 06:44:00.421661 ################################################################# Jun 30 06:44:00.721675 ################################################################# Jun 30 06:44:01.021757 ################################################################# Jun 30 06:44:01.321653 ################################################################# Jun 30 06:44:01.609686 ###################################### Jun 30 06:44:01.765601 2.8 MiB/s Jun 30 06:44:01.765631 done Jun 30 06:44:01.765653 Bytes transferred = 26310352 (19176d0 hex) Jun 30 06:44:01.765678 Retrieving file: /osstest/debian-installer/armhf/2024-03-26-bookworm/linux Jun 30 06:44:01.777736 Using asx0 device Jun 30 06:44:01.777790 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 06:44:01.789738 Filename '/osstest/debian-installer/armhf/2024-03-26-bookworm/linux'. Jun 30 06:44:01.789802 Load address: 0x42000000 Jun 30 06:44:01.801676 Loading: *################################################################# Jun 30 06:44:02.089709 ################################################################# Jun 30 06:44:02.329671 ################################################################# Jun 30 06:44:02.581678 ################################################################# Jun 30 06:44:02.833693 ################################################################# Jun 30 06:44:03.109673 ############################################# Jun 30 06:44:03.301624 3.3 MiB/s Jun 30 06:44:03.301655 done Jun 30 06:44:03.301676 Bytes transferred = 5423616 (52c200 hex) Jun 30 06:44:03.301700 append: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-metrocentre url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=56456 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-metrocentre--initrd.gz --- console=ttySAC2,115200n8 Jun 30 06:44:03.349639 Retrieving file: /osstest/debian-installer/armhf/2024-03-26-bookworm/dtbs/exynos5250-arndale.dtb Jun 30 06:44:03.349677 Using asx0 device Jun 30 06:44:03.349700 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 06:44:03.361649 Filename '/osstest/debian-installer/armhf/2024-03-26-bookworm/dtbs/exynos5250-arndale.dtb'. Jun 30 06:44:03.373591 Load address: 0x43000000 Jun 30 06:44:03.373622 Loading: *#### Jun 30 06:44:03.385597 2.3 MiB/s Jun 30 06:44:03.385627 done Jun 30 06:44:03.385648 Bytes transferred = 46686 (b65e hex) Jun 30 06:44:03.397641 Kernel image @ 0x42000000 [ 0x000000 - 0x52c200 ] Jun 30 06:44:03.397676 ## Flattened Device Tree blob at 43000000 Jun 30 06:44:03.397702 Booting using the fdt blob at 0x43000000 Jun 30 06:44:03.409601 Loading Ramdisk to 4e6e8000, end 4ffff6d0 ... OK Jun 30 06:44:03.829675 Loading Device Tree to 4e6d9000, end 4e6e765d ... OK Jun 30 06:44:03.829739 Jun 30 06:44:03.841702 Starting kernel ...(fake run for tracing) Jun 30 06:44:03.841762 Jun 30 06:44:03.841801 Jun 30 06:44:03.841838 Starting kernel ... Jun 30 06:44:03.853672 Jun 30 06:44:03.853867 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 06:44:09.961757 [ 0.000000] Linux version 6.1.0-18-armmp (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.76-1 (2024-02-01) Jun 30 06:44:09.973769 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 30 06:44:09.985749 [ 0.000000] CPU: div instructions available: patching division code Jun 30 06:44:09.985813 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 06:44:09.997745 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 06:44:09.997815 [ 0.000000] Memory policy: Data cache writealloc Jun 30 06:44:10.009741 [ 0.000000] efi: UEFI not found. Jun 30 06:44:10.009799 [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 Jun 30 06:44:10.009846 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 06:44:10.021756 [ 0.000000] Zone ranges: Jun 30 06:44:10.021812 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Jun 30 06:44:10.021860 [ 0.000000] Normal empty Jun 30 06:44:10.033732 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Jun 30 06:44:10.033794 [ 0.000000] Movable zone start for each node Jun 30 06:44:10.045741 [ 0.000000] Early memory node ranges Jun 30 06:44:10.045801 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 06:44:10.045850 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 06:44:10.057739 [ 0.000000] percpu: Embedded 18 pages/cpu s41620 r8192 d23916 u73728 Jun 30 06:44:10.057802 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Jun 30 06:44:10.069753 [ 0.000000] Kernel command line: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-metrocentre url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=56456 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-metrocentre--initrd.gz --- console=ttySAC2,115200n8 Jun 30 06:44:10.117776 [ 0.000000] Unknown kernel command line parameters "preseed --- vga=normal auto=true hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=56456 domain=test-lab.xenproject.org", will be passed to user space. Jun 30 06:44:10.153738 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Jun 30 06:44:10.165734 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 06:44:10.165802 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Jun 30 06:44:10.177734 [ 0.000000] Memory: 2015996K/2097152K available (11264K kernel code, 1696K rwdata, 3716K rodata, 2048K init, 378K bss, 64772K reserved, 16384K cma-reserved, 1294332K highmem) Jun 30 06:44:10.189630 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 06:44:10.201692 [ 0.000000] ftrace: allocating 39582 entries in 117 pages Jun 30 06:44:10.201747 [ 0.000000] ftrace: allocated 116 pages with 4 groups Jun 30 06:44:10.201793 [ 0.000000] trace event string verifier disabled Jun 30 06:44:10.213627 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 06:44:10.213660 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Jun 30 06:44:10.225749 [ 0.000000] Rude variant of Tasks RCU enabled. Jun 30 06:44:10.225810 [ 0.000000] Tracing variant of Tasks RCU enabled. Jun 30 06:44:10.237740 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Jun 30 06:44:10.237809 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 06:44:10.249697 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 06:44:10.249731 [ 0.000000] GIC: Using split EOI/Deactivate mode Jun 30 06:44:10.261741 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 06:44:10.261805 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 06:44:10.273647 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Jun 30 06:44:10.273682 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Jun 30 06:44:10.285747 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Jun 30 06:44:10.297732 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Jun 30 06:44:10.297800 [ 0.002634] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Jun 30 06:44:10.309639 [ 0.002649] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 06:44:10.321736 [ 0.002664] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 06:44:10.321807 [ 0.002676] Ignoring duplicate/late registration of read_current_timer delay Jun 30 06:44:10.333652 [ 0.003042] Console: colour dummy device 80x30 Jun 30 06:44:10.333685 [ 0.003082] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Jun 30 06:44:10.345655 [ 0.003096] CPU: Testing write buffer coherency: ok Jun 30 06:44:10.345688 [ 0.003138] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 06:44:10.357651 [ 0.003146] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 06:44:10.369670 [ 0.003152] pid_max: default: 32768 minimum: 301 Jun 30 06:44:10.369704 [ 0.003509] LSM: Security Framework initializing Jun 30 06:44:10.381637 [ 0.003579] landlock: Up and running. Jun 30 06:44:10.381669 [ 0.003584] Yama: disabled by default; enable with sysctl kernel.yama.* Jun 30 06:44:10.381696 [ 0.003771] AppArmor: AppArmor initialized Jun 30 06:44:10.393753 [ 0.003783] TOMOYO Linux initialized Jun 30 06:44:10.393811 [ 0.003826] LSM support for eBPF active Jun 30 06:44:10.393856 [ 0.004070] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 06:44:10.405750 [ 0.004085] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 06:44:10.417733 [ 0.005518] /cpus/cpu@0 missing clock-frequency property Jun 30 06:44:10.417793 [ 0.005545] /cpus/cpu@1 missing clock-frequency property Jun 30 06:44:10.417841 [ 0.005558] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 06:44:10.429849 [ 0.006511] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 06:44:10.441731 [ 0.006518] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 06:44:10.441793 [ 0.006621] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 06:44:10.453759 [ 0.006627] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 06:44:10.453821 [ 0.006774] Setting up static identity map for 0x40300000 - 0x403000ac Jun 30 06:44:10.465741 [ 0.007946] rcu: Hierarchical SRCU implementation. Jun 30 06:44:10.465801 [ 0.007951] rcu: Max phase no-delay instances is 1000. Jun 30 06:44:10.477757 [ 0.010093] EFI services will not be available. Jun 30 06:44:10.477819 [ 0.010438] smp: Bringing up secondary CPUs ... Jun 30 06:44:10.477866 [ 0.011178] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 06:44:10.489745 [ 0.011190] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 06:44:10.501739 [ 0.011323] smp: Brought up 1 node, 2 CPUs Jun 30 06:44:10.501799 [ 0.011331] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 06:44:10.501850 [ 0.011339] CPU: All CPU(s) started in HYP mode. Jun 30 06:44:10.513801 [ 0.011343] CPU: Virtualization extensions available. Jun 30 06:44:10.513865 [ 0.011969] devtmpfs: initialized Jun 30 06:44:10.513909 [ 0.023033] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 06:44:10.525756 [ 0.023286] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Jun 30 06:44:10.537760 [ 0.023310] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 06:44:10.537824 [ 0.023788] pinctrl core: initialized pinctrl subsystem Jun 30 06:44:10.549744 [ 0.024521] DMI not present or invalid. Jun 30 06:44:10.549802 [ 0.025197] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 06:44:10.561718 [ 0.030560] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 06:44:10.561782 [ 0.032123] audit: initializing netlink subsys (disabled) Jun 30 06:44:10.573745 [ 0.032325] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 Jun 30 06:44:10.573813 [ 0.033484] thermal_sys: Registered thermal governor 'fair_share' Jun 30 06:44:10.585754 [ 0.033491] thermal_sys: Registered thermal governor 'bang_bang' Jun 30 06:44:10.585816 [ 0.033496] thermal_sys: Registered thermal governor 'step_wise' Jun 30 06:44:10.597752 [ 0.033500] thermal_sys: Registered thermal governor 'user_space' Jun 30 06:44:10.597814 [ 0.033504] thermal_sys: Registered thermal governor 'power_allocator' Jun 30 06:44:10.609751 [ 0.033871] No ATAGs? Jun 30 06:44:10.609807 [ 0.033939] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jun 30 06:44:10.621751 [ 0.033948] hw-breakpoint: maximum watchpoint size is 8 bytes. Jun 30 06:44:10.621812 [ 0.035032] Serial: AMBA PL011 UART driver Jun 30 06:44:10.633799 [ 0.091421] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Jun 30 06:44:10.633871 [ 0.102439] iommu: Default domain type: Translated Jun 30 06:44:10.645750 [ 0.102446] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 06:44:10.645812 [ 0.103427] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Jun 30 06:44:10.657760 [ 0.103980] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 06:44:10.657820 [ 0.103992] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 06:44:10.669736 [ 0.104640] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 06:44:10.669807 [ 0.104669] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 06:44:10.681756 [ 0.104852] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 06:44:10.693761 [ 0.105206] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 06:44:10.693822 [ 0.105216] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 06:44:10.693870 [ 0.105608] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 06:44:10.705743 [ 0.105899] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 06:44:10.705803 [ 0.105908] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 06:44:10.717753 [ 0.106182] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 06:44:10.717814 [ 0.106282] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 06:44:10.729740 [ 0.106291] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 06:44:10.729802 [ 0.106490] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 06:44:10.741746 [ 0.106688] pps_core: LinuxPPS API ver. 1 registered Jun 30 06:44:10.741808 [ 0.106693] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 06:44:10.753770 [ 0.106709] PTP clock support registered Jun 30 06:44:10.753828 [ 0.108195] NetLabel: Initializing Jun 30 06:44:10.753873 [ 0.108202] NetLabel: domain hash size = 128 Jun 30 06:44:10.765745 [ 0.108207] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Jun 30 06:44:10.765807 [ 0.108279] NetLabel: unlabeled traffic allowed by default Jun 30 06:44:10.777738 [ 0.108439] vgaarb: loaded Jun 30 06:44:10.777794 [ 0.109115] clocksource: Switched to clocksource mct-frc Jun 30 06:44:10.777843 [ 0.178179] VFS: Disk quotas dquot_6.6.0 Jun 30 06:44:10.789739 [ 0.178279] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jun 30 06:44:10.789804 [ 0.179020] AppArmor: AppArmor Filesystem Enabled Jun 30 06:44:10.801735 [ 0.188098] NET: Registered PF_INET protocol family Jun 30 06:44:10.801796 [ 0.188306] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Jun 30 06:44:10.813745 [ 0.189917] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 06:44:10.813814 [ 0.190010] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 06:44:10.825761 [ 0.190040] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Jun 30 06:44:10.837741 [ 0.190137] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Jun 30 06:44:10.837808 [ 0.190366] TCP: Hash tables configured (established 8192 bind 8192) Jun 30 06:44:10.849746 [ 0.190576] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Jun 30 06:44:10.849814 [ 0.190654] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 06:44:10.861754 [ 0.190694] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 06:44:10.861818 [ 0.190900] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 06:44:10.873780 [ 0.190934] NET: Registered PF_XDP protocol family Jun 30 06:44:10.873840 [ 0.190945] PCI: CLS 0 bytes, default 64 Jun 30 06:44:10.885721 [ 0.191434] Trying to unpack rootfs image as initramfs... Jun 30 06:44:10.885783 [ 0.193890] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Jun 30 06:44:10.897774 [ 0.194531] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Jun 30 06:44:10.897844 [ 0.196147] Initialise system trusted keyrings Jun 30 06:44:10.909745 [ 0.196216] Key type blacklist registered Jun 30 06:44:10.909804 [ 0.196496] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Jun 30 06:44:10.921738 [ 0.203790] zbud: loaded Jun 30 06:44:10.921794 [ 0.204873] integrity: Platform Keyring initialized Jun 30 06:44:10.921842 [ 0.204912] integrity: Machine keyring initialized Jun 30 06:44:10.933769 [ 0.204920] Key type asymmetric registered Jun 30 06:44:10.933828 [ 0.204927] Asymmetric key parser 'x509' registered Jun 30 06:44:10.933874 [ 1.559933] Freeing initrd memory: 25696K Jun 30 06:44:10.945744 [ 1.571654] alg: self-tests for CTR-KDF (hmac(sha256)) passed Jun 30 06:44:10.945807 [ 1.571951] bounce: pool size: 64 pages Jun 30 06:44:10.957745 [ 1.572119] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Jun 30 06:44:10.957814 [ 1.572280] io scheduler mq-deadline registered Jun 30 06:44:10.969749 [ 1.577462] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Jun 30 06:44:10.969820 [ 1.598216] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 06:44:10.981751 [ 1.598227] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 06:44:10.993684 [ 1.600496] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 06:44:10.993760 [ 1.600505] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 06:44:11.005754 [ 1.601404] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 06:44:11.017745 [ 1.601413] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 06:44:11.017817 [ 1.602247] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 06:44:11.029751 [ 1.602256] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 06:44:11.041756 [ 1.604597] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 06:44:11.053761 [ 1.607424] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 06:44:11.053825 [ 1.610182] Serial: AMBA driver Jun 30 06:44:11.053869 [ 1.610426] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 06:44:11.065762 [ 1.610926] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 06:44:11.077752 [ 1.611376] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 06:44:11.089740 [ 2.742277] printk: console [ttySAC2] enabled Jun 30 06:44:11.089800 [ 2.747088] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Jun 30 06:44:11.101720 [ 2.757768] STM32 USART driver initialized Jun 30 06:44:11.101779 [ 2.771850] mousedev: PS/2 mouse device common for all mice Jun 30 06:44:11.113724 [ 2.803061] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 06:44:11.149732 [ 2.811688] s5m-rtc s5m-rtc: setting system clock to 2024-06-30T06:44:13 UTC (1719729853) Jun 30 06:44:11.161740 [ 2.821585] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Jun 30 06:44:11.173669 [ 2.829020] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 06:44:11.173703 [ 2.836990] NET: Registered PF_INET6 protocol family Jun 30 06:44:11.185716 [ 2.850856] Segment Routing with IPv6 Jun 30 06:44:11.197730 [ 2.853150] In-situ OAM (IOAM) with IPv6 Jun 30 06:44:11.197788 [ 2.857031] mip6: Mobile IPv6 Jun 30 06:44:11.197832 [ 2.859937] NET: Registered PF_PACKET protocol family Jun 30 06:44:11.209747 [ 2.865082] mpls_gso: MPLS GSO support Jun 30 06:44:11.209805 [ 2.869342] ThumbEE CPU extension supported. Jun 30 06:44:11.221765 [ 2.872932] Registering SWP/SWPB emulation handler Jun 30 06:44:11.221828 [ 2.878198] registered taskstats version 1 Jun 30 06:44:11.221874 [ 2.881825] Loading compiled-in X.509 certificates Jun 30 06:44:11.233638 [ 3.338923] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Jun 30 06:44:11.689761 [ 3.346288] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Jun 30 06:44:11.701747 [ 3.357317] zswap: loaded using pool lzo/zbud Jun 30 06:44:11.701806 [ 3.361320] Key type .fscrypt registered Jun 30 06:44:11.701852 [ 3.364544] Key type fscrypt-provisioning registered Jun 30 06:44:11.713702 [ 3.378427] Key type encrypted registered Jun 30 06:44:11.725758 [ 3.380973] AppArmor: AppArmor sha1 policy hashing enabled Jun 30 06:44:11.725820 [ 3.386513] ima: No TPM chip found, activating TPM-bypass! Jun 30 06:44:11.737759 [ 3.391927] ima: Allocated hash algorithm: sha256 Jun 30 06:44:11.737819 [ 3.396655] ima: No architecture policies found Jun 30 06:44:11.749733 [ 3.401225] evm: Initialising EVM extended attributes: Jun 30 06:44:11.749795 [ 3.406242] evm: security.selinux Jun 30 06:44:11.749840 [ 3.409536] evm: security.SMACK64 (disabled) Jun 30 06:44:11.761740 [ 3.413788] evm: security.SMACK64EXEC (disabled) Jun 30 06:44:11.761801 [ 3.418389] evm: security.SMACK64TRANSMUTE (disabled) Jun 30 06:44:11.761849 [ 3.423423] evm: security.SMACK64MMAP (disabled) Jun 30 06:44:11.773759 [ 3.428023] evm: security.apparmor Jun 30 06:44:11.773790 [ 3.431408] evm: security.ima Jun 30 06:44:11.773814 [ 3.434360] evm: security.capability Jun 30 06:44:11.785692 [ 3.437919] evm: HMAC attrs: 0x1 Jun 30 06:44:11.785750 [ 4.020734] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 06:44:12.373677 [ 4.047003] Freeing unused kernel image (initmem) memory: 2048K Jun 30 06:44:12.397740 [ 4.051872] Checked W+X mappings: passed, no W+X pages found Jun 30 06:44:12.397802 [ 4.057136] Run /init as init process Jun 30 06:44:12.397847 [ 4.611105] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 06:44:12.961729 [ 4.679042] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 06:44:13.033701 [ 4.694471] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 06:44:13.045723 [ 4.712048] usbcore: registered new interface driver usbfs Jun 30 06:44:13.057707 [ 4.725537] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 06:44:13.069747 [ 4.748657] usbcore: registered new interface driver hub Jun 30 06:44:13.093717 [ 4.773278] usbcore: registered new device driver usb Jun 30 06:44:13.117741 [ 4.778085] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 06:44:13.129713 [ 4.812687] phy phy-12130000.phy.1: phy_power_on was called before phy_init Jun 30 06:44:13.165717 [ 4.821480] phy phy-12130000.phy.1: phy_power_on was called before phy_init Jun 30 06:44:13.165783 [ 4.852517] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 06:44:13.201723 [ 4.864521] exynos-ohci 12120000.usb: USB Host Controller Jun 30 06:44:13.221621 [ 4.868698] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Jun 30 06:44:13.221704 [ 4.886767] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Jun 30 06:44:13.237811 [ 4.893157] usb3503 usb-hub: switched to HUB mode Jun 30 06:44:13.237872 [ 4.897681] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 06:44:13.249737 [ 4.905728] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Jun 30 06:44:13.249801 [ 4.913646] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Jun 30 06:44:13.261603 [ 4.933221] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 06:44:13.285743 [ 4.941498] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 06:44:13.285838 [ 4.948350] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 06:44:13.297752 [ 4.955554] usb usb1: Product: EHCI Host Controller Jun 30 06:44:13.297811 [ 4.960382] usb usb1: Manufacturer: Linux 6.1.0-18-armmp ehci_hcd Jun 30 06:44:13.309744 [ 4.966456] usb usb1: SerialNumber: 12110000.usb Jun 30 06:44:13.309803 [ 4.972615] hub 1-0:1.0: USB hub found Jun 30 06:44:13.321715 [ 4.975946] hub 1-0:1.0: 3 ports detected Jun 30 06:44:13.321773 [ 4.997300] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Jun 30 06:44:13.345791 [ 5.004152] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 06:44:13.357686 [ 5.011347] usb usb2: Product: USB Host Controller Jun 30 06:44:13.357751 [ 5.016112] usb usb2: Manufacturer: Linux 6.1.0-18-armmp ohci_hcd Jun 30 06:44:13.369719 [ 5.022183] usb usb2: SerialNumber: 12120000.usb Jun 30 06:44:13.369779 [ 5.030676] hub 2-0:1.0: USB hub found Jun 30 06:44:13.381689 [ 5.035610] hub 2-0:1.0: 3 ports detected Jun 30 06:44:13.381749 [ 5.258529] usb 1-3: new high-speed USB device number 2 using exynos-ehci Jun 30 06:44:13.609698 [ 5.272816] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 06:44:13.621744 [ 5.276925] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 06:44:13.621812 [ 5.285041] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 Jun 30 06:44:13.633758 [ 5.293925] xhci-hcd xhci-hcd.2.auto: irq 108, io mem 0x12000000 Jun 30 06:44:13.645764 [ 5.300061] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 06:44:13.645826 [ 5.305336] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 06:44:13.657756 [ 5.312969] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 06:44:13.657820 [ 5.319630] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 06:44:13.669750 [ 5.327726] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 06:44:13.681751 [ 5.334926] usb usb3: Product: xHCI Host Controller Jun 30 06:44:13.681811 [ 5.339786] usb usb3: Manufacturer: Linux 6.1.0-18-armmp xhci-hcd Jun 30 06:44:13.693743 [ 5.345871] usb usb3: SerialNumber: xhci-hcd.2.auto Jun 30 06:44:13.693805 [ 5.351948] hub 3-0:1.0: USB hub found Jun 30 06:44:13.693850 [ 5.354496] hub 3-0:1.0: 1 port detected Jun 30 06:44:13.705740 [ 5.359330] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 06:44:13.705810 [ 5.366560] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Jun 30 06:44:13.717754 [ 5.374684] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 06:44:13.729755 [ 5.381893] usb usb4: Product: xHCI Host Controller Jun 30 06:44:13.729815 [ 5.386743] usb usb4: Manufacturer: Linux 6.1.0-18-armmp xhci-hcd Jun 30 06:44:13.729865 [ 5.392819] usb usb4: SerialNumber: xhci-hcd.2.auto Jun 30 06:44:13.741761 [ 5.398925] hub 4-0:1.0: USB hub found Jun 30 06:44:13.741819 [ 5.401447] hub 4-0:1.0: 1 port detected Jun 30 06:44:13.753663 [ 5.425480] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Jun 30 06:44:13.777748 [ 5.432228] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jun 30 06:44:13.777812 [ 5.440914] hub 1-3:1.0: USB hub found Jun 30 06:44:13.789711 [ 5.443355] hub 1-3:1.0: 3 ports detected Jun 30 06:44:13.789770 Starting system log daemon: syslogd, klogd. Jun 30 06:44:13.897671 /var/run/utmp: No such file or directory Jun 30 06:44:15.745780 [?1h=(B   Jun 30 06:44:15.793802  Jun 30 06:44:15.805832 [  (-*) ][ Jun 30  6:44 ] Jun 30 06:44:15.817795 [  (0*start) ][ Jun 30  6:44 ] Jun 30 06:44:15.829773 [  (0*start) ][ Jun 30  6:44 ] Jun 30 06:44:15.841764 [  (0*start) ][ Jun 30  6:44 ] Jun 30 06:44:15.853744 [  (0*start) ][ Jun 30  6:44 ]                        [  (0*start) ][ Jun 30  6:44 ][  (0*start) ][ Jun 30  6:44 ] Jun 30 06:44:15.913745 [ 0- start  (2*shell) ][ Jun 30  6:44 ] Jun 30 06:44:15.925740 [ 0- start  (2*shell) ][ Jun 30  6:44 ] Jun 30 06:44:15.937764 [ 0- start  (2*shell) ][ Jun 30  6:44 ] Jun 30 06:44:15.949736 [ 0- start  (2*shell) ][ Jun 30  6:44 ]                        [ 0- start  (2*shell) ][ Jun 30  6:44 ][ 0- start  (2*shell) ][ Jun 30  6:44 ] Jun 30 06:44:16.009745 [ 0 start 2- shell  (3*shell) ][ Jun 30  6:44 ] Jun 30 06:44:16.021741 [ 0 start 2- shell  (3*shell) ][ Jun 30  6:44 ] Jun 30 06:44:16.033752 [ 0 start 2- shell  (3*shell) ][ Jun 30  6:44 ] Jun 30 06:44:16.045755 [ 0 start 2- shell  (3*shell) ][ Jun 30  6:44 ]                        [ 0 start 2- shell  (3*shell) ][ Jun 30  6:44 ][ 0 start 2- shell  (3*shell) ][ Jun 30  6:44 ] Jun 30 06:44:16.105743 [ 0 start 2 shell 3- shell  (4*log) ][ Jun 30  6:44 ] Jun 30 06:44:16.117757 [ 0 start 2 shell 3- shell  (4*log) ][ Jun 30  6:44 ] Jun 30 06:44:16.129801 [ 0 start 2 shell 3- shell  (4*log) ][ Jun 30  6:44 ] Jun 30 06:44:16.141752 [ 0 start 2 shell 3- shell  (4*log) ][ Jun 30  6:44 ]                        [ 0 start 2 shell 3- shell  (4*log) ][ Jun 30  6:44 ][ 0 start 2 shell 3- shell  (4*log) ][ Jun 30  6:44 ] Jun 30 06:44:16.201649 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30  6:44 ] Jun 30 06:44:16.213750 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30  6:44 ] Jun 30 06:44:16.225758 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30  6:44 ] Jun 30 06:44:16.237764 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30  6:44 ]                        [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30  6:44 ][ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30  6:44 ] Jun 30 06:44:16.297753 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  6:44 ] Jun 30 06:44:16.309750 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  6:44 ] Jun 30 06:44:16.321763 [  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  6:44 ] Jun 30 06:44:16.777773 Detecting network hardware ... 2%... 95%... 100% Jun 30 06:44:18.517711 Detecting link on eth0; please wait... ... 0%... 10%... 20% Jun 30 06:44:23.409741 Waiting for link-local address... ... 8%... 16%... 25%... 33%... 41%... 50%... 100% Jun 30 06:44:25.209718 Attempting IPv6 autoconfiguration... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 75%... 83%... 91%... 100% Jun 30 06:44:31.284603 Configuring the network with DHCP ... 0%... 100% Jun 30 06:44:34.442764 Checking the Debian archive mirror ... 25%... 50%... 75%... 100% Jun 30 06:44:42.665695 Loading additional components ... 0%... 10%... 20%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  6:45 ]... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Jun 30 06:45:16.545706 Setting up the clock ... 0%... 100% Jun 30 06:45:19.329746 Loading additional components ... 50%... 100% Jun 30 06:45:21.001763 Detecting disks and all other hardware ... 2%... 95%... 100% Jun 30 06:45:25.249803 Loading additional components ... 5%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Jun 30 06:45:34.033600 Loading additional components ... 25%... 50%... 75%... 100% Jun 30 06:45:36.421603 Starting up the partitioner ... 4%... 13%... 21%... 30%... 43%... 52%... 60%... 73%... 82%... 91%... 100% Jun 30 06:45:48.617766 Guided partitioning ... 16%... 33%... 50%... 66%... 83%... 100% Jun 30 06:45:57.077795 Starting up the partitioner ... 4%... 12%... 20%... 32%... 40%... 52%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  6:46 ]... 60%... 72%... 80%... 92%... 100% Jun 30 06:46:07.169703 Partitions formatting ... 33% Jun 30 06:46:15.721711 Partitions formatting Partitions formatting Installing the base system ... 0%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  6:47 ]... 17%... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  6:48 ]... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  6:49 ]... 48%... 50%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  6:50 ]...  Jun 30 06:50:14.021734  60%... 70%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  6:51 ]... 79%... 83%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  6:52 ][  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  6:53 ]... 91%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  6:54 ]... 100% Jun 30 06:54:40.449726 Configuring apt ... 7%... 14%... 14%... 21%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  6:55 ]... 35%... 42%... 50%... 61%... 71%. Jun 30 06:55:17.785658 ... 82%... 92%... 100% Jun 30 06:55:20.405715 Select and install software ... 1%... 10%... 13%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  6:56 ]... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  6:57 ]... 40%... 50%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  6:58 ]... Jun 30 06:58:07.061739 . 60%... 70%... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  6:59 ]... 88%... 90%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  7:00 ]... 94%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  7:01 ]... 100% Jun 30 07:01:12.601597 Finishing the installation ... 4%... 12%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  7:02 ]... 16%... 20%... 32%... 40%... 44%... Jun 30 07:03:00.081572  52%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  7:03 ]... 60%... 72%... 80%... 92% The system is g Sent SIGKILL to all processes Jun 30 07:03:10.953702 Requesting system reboot Jun 30 07:03:10.953744 [ 1143.648409] reboot: Reó Jun 30 07:03:12.309631 Jun 30 07:03:12.309645 Jun 30 07:03:12.309705 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 07:03:12.321706 Jun 30 07:03:12.321733 CPU: Exynos5250@1000MHz Jun 30 07:03:12.321757 Jun 30 07:03:12.321777 Board: Arndale Jun 30 07:03:12.321799 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 07:03:12.333665 ready Jun 30 07:03:12.333694 DRAM: 2 GiB Jun 30 07:03:12.333716 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 07:03:12.345665 trace: enabled Jun 30 07:03:12.381635 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 07:03:12.741773 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 07:03:12.825023 In: serial Jun 30 07:03:12.825090 Out: serial Jun 30 07:03:12.825133 Err: serial Jun 30 07:03:12.825173 SCSI: ARNDALE SCSI INIT Jun 30 07:03:12.825215 Target spinup took 0 ms. Jun 30 07:03:12.825733 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 07:03:12.825784 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 07:03:12.825831 Net: Net Initialization Skipped Jun 30 07:03:12.825874 No ethernet found. Jun 30 07:03:12.825914 Hostname: arndale-metrocentre Jun 30 07:03:12.825956 Hit any key to stop autoboot: 2  1  0 Jun 30 07:03:14.757764 (Re)start USB... Jun 30 07:03:14.757832 USB0: USB EHCI 1.00 Jun 30 07:03:14.757874 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 07:03:20.365757 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 07:03:20.365836 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 07:03:20.809715 Waiting for Ethernet connection... done. Jun 30 07:03:22.405687 BOOTP broadcast 1 Jun 30 07:03:22.405744 EHCI timed out on TD - token=0x8008d80 Jun 30 07:03:27.209696 BOOTP broadcast 2 Jun 30 07:03:27.209763 DHCP client bound to address 10.149.64.44 (5009 ms) Jun 30 07:03:27.221772 Using asx0 device Jun 30 07:03:27.221827 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 07:03:27.233820 Filename 'pxelinux.0'. Jun 30 07:03:27.233877 Load address: 0x43e00000 Jun 30 07:03:27.233921 Loading: *### Jun 30 07:03:27.245684 2.4 MiB/s Jun 30 07:03:27.245739 done Jun 30 07:03:27.245780 Bytes transferred = 42430 (a5be hex) Jun 30 07:03:27.257778 missing environment variable: pxeuuid Jun 30 07:03:27.257838 Retrieving file: pxelinux.cfg/0A95402C Jun 30 07:03:27.257884 Using asx0 device Jun 30 07:03:27.257926 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 07:03:27.269666 Filename 'pxelinux.cfg/0A95402C'. Jun 30 07:03:27.269666 Load address: 0x51000000 Jun 30 07:03:27.269666 Loading: *# Jun 30 07:03:27.269666 31.3 KiB/s Jun 30 07:03:27.281778 done Jun 30 07:03:27.281778 Bytes transferred = 65 (41 hex) Jun 30 07:03:27.281778 Config file found Jun 30 07:03:27.281778 Ignoring unknown command: serial Jun 30 07:03:27.281778 1: local Jun 30 07:03:27.281778 scanning bus for devices... Jun 30 07:03:27.281778 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 07:03:27.293607 Type: Hard Disk Jun 30 07:03:27.305672 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 07:03:27.305672 Found 1 device(s). Jun 30 07:03:27.305672 Jun 30 07:03:27.305672 SCSI device 0: Jun 30 07:03:27.305672 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 07:03:27.317662 Type: Hard Disk Jun 30 07:03:27.317662 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 07:03:27.329625 ... is now current device Jun 30 07:03:27.329625 Scanning scsi 0... Jun 30 07:03:27.329625 Found U-Boot script /boot.scr Jun 30 07:03:27.437601 641 bytes read in 49 ms (12.7 KiB/s) Jun 30 07:03:27.497636 ## Executing script at 50000000 Jun 30 07:03:27.497636 Loading dtbs/exynos5250-arndale.dtb Jun 30 07:03:27.497636 46686 bytes read in 1181 ms (38.1 KiB/s) Jun 30 07:03:28.661633 Loading vmlinuz-6.1.0-22-armmp-lpae Jun 30 07:03:28.661633 5505536 bytes read in 188 ms (27.9 MiB/s) Jun 30 07:03:28.865624 Loading initrd.img-6.1.0-22-armmp-lpae Jun 30 07:03:28.865624 25720840 bytes read in 1928 ms (12.7 MiB/s) Jun 30 07:03:30.741808 Booting Jun 30 07:03:30.766747 Kernel image @ 0x42000000 [ 0x000000 - 0x540200 ] Jun 30 07:03:30.766754 ## Flattened Device Tree blob at 43000000 Jun 30 07:03:30.766754 Booting using the fdt blob at 0x43000000 Jun 30 07:03:30.766754 Loading Ramdisk to 4e778000, end 4ffff808 ... OK Jun 30 07:03:31.173614 Loading Device Tree to 4e769000, end 4e77765d ... OK Jun 30 07:03:31.173614 Jun 30 07:03:31.185614 Starting kernel ...(fake run for tracing) Jun 30 07:03:31.185614 Jun 30 07:03:31.185614 Jun 30 07:03:31.197600 Starting kernel ... Jun 30 07:03:31.197600 Jun 30 07:03:31.197600 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 07:03:37.341772 [ 0.000000] Linux version 6.1.0-22-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.94-1 (2024-06-21) Jun 30 07:03:37.353733 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=30c5387d Jun 30 07:03:37.365720 [ 0.000000] CPU: div instructions available: patching division code Jun 30 07:03:37.377696 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 07:03:37.377754 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 07:03:37.389768 [ 0.000000] Memory policy: Data cache writealloc Jun 30 07:03:37.389827 [ 0.000000] efi: UEFI not found. Jun 30 07:03:37.389871 [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000 Jun 30 07:03:37.401785 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 07:03:37.401845 [ 0.000000] Zone ranges: Jun 30 07:03:37.401888 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Jun 30 07:03:37.413762 [ 0.000000] Normal empty Jun 30 07:03:37.413818 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Jun 30 07:03:37.425759 [ 0.000000] Movable zone start for each node Jun 30 07:03:37.425819 [ 0.000000] Early memory node ranges Jun 30 07:03:37.425863 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 07:03:37.437768 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 07:03:37.437832 [ 0.000000] percpu: Embedded 18 pages/cpu s44756 r8192 d20780 u73728 Jun 30 07:03:37.449762 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Jun 30 07:03:37.461759 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=ttySAC2,115200n8 Jun 30 07:03:37.461835 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Jun 30 07:03:37.473779 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 07:03:37.485773 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Jun 30 07:03:37.485836 [ 0.000000] Memory: 2015520K/2097152K available (12288K kernel code, 1714K rwdata, 3748K rodata, 2048K init, 382K bss, 65248K reserved, 16384K cma-reserved, 1294332K highmem) Jun 30 07:03:37.509759 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 07:03:37.509824 [ 0.000000] ftrace: allocating 39982 entries in 118 pages Jun 30 07:03:37.521767 [ 0.000000] ftrace: allocated 118 pages with 5 groups Jun 30 07:03:37.521830 [ 0.000000] trace event string verifier disabled Jun 30 07:03:37.521877 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 07:03:37.533778 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Jun 30 07:03:37.533842 [ 0.000000] Rude variant of Tasks RCU enabled. Jun 30 07:03:37.545733 [ 0.000000] Tracing variant of Tasks RCU enabled. Jun 30 07:03:37.545795 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Jun 30 07:03:37.557735 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 07:03:37.557798 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 07:03:37.569790 [ 0.000000] GIC: Using split EOI/Deactivate mode Jun 30 07:03:37.569851 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 07:03:37.581758 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 07:03:37.581821 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Jun 30 07:03:37.593756 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Jun 30 07:03:37.593827 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Jun 30 07:03:37.605785 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Jun 30 07:03:37.617769 [ 0.002632] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Jun 30 07:03:37.617831 [ 0.002646] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 07:03:37.629756 [ 0.002660] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 07:03:37.641716 [ 0.002672] Ignoring duplicate/late registration of read_current_timer delay Jun 30 07:03:37.641775 [ 0.003036] Console: colour dummy device 80x30 Jun 30 07:03:37.653706 [ 0.003075] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Jun 30 07:03:37.665703 [ 0.003088] CPU: Testing write buffer coherency: ok Jun 30 07:03:37.665755 [ 0.003130] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 07:03:37.677708 [ 0.003139] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 07:03:37.677763 [ 0.003145] pid_max: default: 32768 minimum: 301 Jun 30 07:03:37.689701 [ 0.003502] LSM: Security Framework initializing Jun 30 07:03:37.689754 [ 0.003574] landlock: Up and running. Jun 30 07:03:37.689797 [ 0.003579] Yama: disabled by default; enable with sysctl kernel.yama.* Jun 30 07:03:37.701718 [ 0.003763] AppArmor: AppArmor initialized Jun 30 07:03:37.701769 [ 0.003775] TOMOYO Linux initialized Jun 30 07:03:37.713721 [ 0.003820] LSM support for eBPF active Jun 30 07:03:37.713772 [ 0.004064] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 07:03:37.713825 [ 0.004078] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 07:03:37.725772 [ 0.005485] /cpus/cpu@0 missing clock-frequency property Jun 30 07:03:37.737721 [ 0.005514] /cpus/cpu@1 missing clock-frequency property Jun 30 07:03:37.737783 [ 0.005527] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 07:03:37.737843 [ 0.006481] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 07:03:37.749777 [ 0.006488] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 07:03:37.761762 [ 0.006591] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 07:03:37.761831 [ 0.006596] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 07:03:37.773767 [ 0.006736] Setting up static identity map for 0x40400000 - 0x404000ac Jun 30 07:03:37.773830 [ 0.007901] rcu: Hierarchical SRCU implementation. Jun 30 07:03:37.785774 [ 0.007907] rcu: Max phase no-delay instances is 1000. Jun 30 07:03:37.785836 [ 0.010035] EFI services will not be available. Jun 30 07:03:37.785883 [ 0.010374] smp: Bringing up secondary CPUs ... Jun 30 07:03:37.797782 [ 0.011111] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 07:03:37.797844 [ 0.011123] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 07:03:37.809767 [ 0.011257] smp: Brought up 1 node, 2 CPUs Jun 30 07:03:37.809826 [ 0.011265] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 07:03:37.821770 [ 0.011273] CPU: All CPU(s) started in HYP mode. Jun 30 07:03:37.821831 [ 0.011277] CPU: Virtualization extensions available. Jun 30 07:03:37.833783 [ 0.012142] devtmpfs: initialized Jun 30 07:03:37.833842 [ 0.023015] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 07:03:37.845803 [ 0.023247] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Jun 30 07:03:37.857750 [ 0.023271] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 07:03:37.857814 [ 0.023806] pinctrl core: initialized pinctrl subsystem Jun 30 07:03:37.869750 [ 0.024559] DMI not present or invalid. Jun 30 07:03:37.869809 [ 0.025231] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 07:03:37.869859 [ 0.026773] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 07:03:37.881802 [ 0.028254] audit: initializing netlink subsys (disabled) Jun 30 07:03:37.893725 [ 0.028457] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 Jun 30 07:03:37.893795 [ 0.029643] thermal_sys: Registered thermal governor 'fair_share' Jun 30 07:03:37.905775 [ 0.029651] thermal_sys: Registered thermal governor 'bang_bang' Jun 30 07:03:37.905838 [ 0.029655] thermal_sys: Registered thermal governor 'step_wise' Jun 30 07:03:37.917761 [ 0.029660] thermal_sys: Registered thermal governor 'user_space' Jun 30 07:03:37.917824 [ 0.029664] thermal_sys: Registered thermal governor 'power_allocator' Jun 30 07:03:37.929748 [ 0.029864] No ATAGs? Jun 30 07:03:37.929803 [ 0.029930] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jun 30 07:03:37.941754 [ 0.029938] hw-breakpoint: maximum watchpoint size is 8 bytes. Jun 30 07:03:37.941817 [ 0.031024] Serial: AMBA PL011 UART driver Jun 30 07:03:37.941864 [ 0.080557] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 30 07:03:37.953752 [ 0.087430] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Jun 30 07:03:37.965730 [ 0.091797] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages Jun 30 07:03:37.965730 [ 0.091806] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page Jun 30 07:03:37.977759 [ 0.098709] iommu: Default domain type: Translated Jun 30 07:03:37.977825 [ 0.098716] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 07:03:37.989736 [ 0.099708] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Jun 30 07:03:37.989736 [ 0.100251] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 07:03:38.001647 [ 0.100263] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 07:03:38.001706 [ 0.100764] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 07:03:38.013782 [ 0.100794] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 07:03:38.025762 [ 0.100999] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 07:03:38.025823 [ 0.101361] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 07:03:38.025871 [ 0.101371] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 07:03:38.037780 [ 0.101765] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 07:03:38.037841 [ 0.102056] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 07:03:38.049764 [ 0.102065] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 07:03:38.049826 [ 0.102356] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 07:03:38.061756 [ 0.102456] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 07:03:38.061816 [ 0.102465] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 07:03:38.073750 [ 0.102645] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 07:03:38.073811 [ 0.102858] pps_core: LinuxPPS API ver. 1 registered Jun 30 07:03:38.073858 [ 0.102864] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 07:03:38.085787 [ 0.102880] PTP clock support registered Jun 30 07:03:38.097757 [ 0.104483] NetLabel: Initializing Jun 30 07:03:38.097815 [ 0.104489] NetLabel: domain hash size = 128 Jun 30 07:03:38.097897 [ 0.104494] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Jun 30 07:03:38.109782 [ 0.104549] NetLabel: unlabeled traffic allowed by default Jun 30 07:03:38.109844 [ 0.104729] vgaarb: loaded Jun 30 07:03:38.109887 [ 0.105664] clocksource: Switched to clocksource mct-frc Jun 30 07:03:38.121685 [ 0.106259] VFS: Disk quotas dquot_6.6.0 Jun 30 07:03:38.121685 [ 0.106344] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jun 30 07:03:38.133802 [ 0.107146] AppArmor: AppArmor Filesystem Enabled Jun 30 07:03:38.133867 [ 0.117089] NET: Registered PF_INET protocol family Jun 30 07:03:38.145751 [ 0.117296] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Jun 30 07:03:38.145820 [ 0.118754] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 07:03:38.157776 [ 0.118856] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 07:03:38.157844 [ 0.118881] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Jun 30 07:03:38.169772 [ 0.118982] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Jun 30 07:03:38.181762 [ 0.119213] TCP: Hash tables configured (established 8192 bind 8192) Jun 30 07:03:38.181824 [ 0.119446] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Jun 30 07:03:38.193764 [ 0.119538] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 07:03:38.193827 [ 0.119578] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 07:03:38.205759 [ 0.119816] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 07:03:38.205821 [ 0.119854] NET: Registered PF_XDP protocol family Jun 30 07:03:38.217786 [ 0.119865] PCI: CLS 0 bytes, default 64 Jun 30 07:03:38.217845 [ 0.120354] Trying to unpack rootfs image as initramfs... Jun 30 07:03:38.229755 [ 0.120718] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Jun 30 07:03:38.229824 [ 0.126212] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Jun 30 07:03:38.241771 [ 0.190610] Initialise system trusted keyrings Jun 30 07:03:38.241829 [ 0.190696] Key type blacklist registered Jun 30 07:03:38.253751 [ 0.191921] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Jun 30 07:03:38.253815 [ 0.199896] zbud: loaded Jun 30 07:03:38.253858 [ 0.201885] integrity: Platform Keyring initialized Jun 30 07:03:38.265757 [ 0.201918] integrity: Machine keyring initialized Jun 30 07:03:38.265817 [ 0.201926] Key type asymmetric registered Jun 30 07:03:38.277734 [ 0.201934] Asymmetric key parser 'x509' registered Jun 30 07:03:38.277734 [ 1.423191] Freeing initrd memory: 25120K Jun 30 07:03:38.277734 [ 1.445239] alg: self-tests for CTR-KDF (hmac(sha256)) passed Jun 30 07:03:38.289763 [ 1.445503] bounce: pool size: 64 pages Jun 30 07:03:38.289826 [ 1.445737] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Jun 30 07:03:38.301755 [ 1.445914] io scheduler mq-deadline registered Jun 30 07:03:38.301814 [ 1.451041] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Jun 30 07:03:38.313764 [ 1.472030] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 07:03:38.313831 [ 1.472041] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 07:03:38.325773 [ 1.474365] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 07:03:38.337751 [ 1.474376] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 07:03:38.349753 [ 1.475183] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 07:03:38.349822 [ 1.475191] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 07:03:38.361762 [ 1.476007] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 07:03:38.373762 [ 1.476015] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 07:03:38.373836 [ 1.478380] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 07:03:38.385769 [ 1.481168] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 07:03:38.397763 [ 1.483942] Serial: AMBA driver Jun 30 07:03:38.397820 [ 1.484168] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 07:03:38.409745 [ 1.484643] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 07:03:38.409816 [ 1.485111] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 07:03:38.421764 [ 2.565919] printk: console [ttySAC2] enabled Jun 30 07:03:38.421822 [ 2.570751] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Jun 30 07:03:38.433735 [ 2.581384] STM32 USART driver initialized Jun 30 07:03:38.445693 [ 2.595852] mousedev: PS/2 mouse device common for all mice Jun 30 07:03:38.457690 [ 2.627067] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 07:03:38.481710 [ 2.635696] s5m-rtc s5m-rtc: setting system clock to 2024-06-30T07:03:38 UTC (1719731018) Jun 30 07:03:38.493748 [ 2.645532] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Jun 30 07:03:38.505738 [ 2.652953] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 07:03:38.517704 [ 2.660970] NET: Registered PF_INET6 protocol family Jun 30 07:03:38.517765 [ 2.684988] Segment Routing with IPv6 Jun 30 07:03:38.541728 [ 2.687256] In-situ OAM (IOAM) with IPv6 Jun 30 07:03:38.553746 [ 2.691180] mip6: Mobile IPv6 Jun 30 07:03:38.553803 [ 2.694070] NET: Registered PF_PACKET protocol family Jun 30 07:03:38.553851 [ 2.699213] mpls_gso: MPLS GSO support Jun 30 07:03:38.565750 [ 2.703243] ThumbEE CPU extension supported. Jun 30 07:03:38.565810 [ 2.707094] Registering SWP/SWPB emulation handler Jun 30 07:03:38.565858 [ 2.712332] registered taskstats version 1 Jun 30 07:03:38.577716 [ 2.715956] Loading compiled-in X.509 certificates Jun 30 07:03:38.577776 [ 3.176679] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Jun 30 07:03:39.045771 [ 3.184026] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Jun 30 07:03:39.045846 [ 3.195114] zswap: loaded using pool lzo/zbud Jun 30 07:03:39.057751 [ 3.199007] Key type .fscrypt registered Jun 30 07:03:39.057809 [ 3.202351] Key type fscrypt-provisioning registered Jun 30 07:03:39.069691 [ 3.226622] Key type encrypted registered Jun 30 07:03:39.081713 [ 3.229166] AppArmor: AppArmor sha1 policy hashing enabled Jun 30 07:03:39.093751 [ 3.234700] ima: No TPM chip found, activating TPM-bypass! Jun 30 07:03:39.093813 [ 3.240154] ima: Allocated hash algorithm: sha256 Jun 30 07:03:39.105758 [ 3.244856] ima: No architecture policies found Jun 30 07:03:39.105817 [ 3.249371] evm: Initialising EVM extended attributes: Jun 30 07:03:39.105865 [ 3.254448] evm: security.selinux Jun 30 07:03:39.117743 [ 3.257735] evm: security.SMACK64 (disabled) Jun 30 07:03:39.117802 [ 3.261981] evm: security.SMACK64EXEC (disabled) Jun 30 07:03:39.129740 [ 3.266581] evm: security.SMACK64TRANSMUTE (disabled) Jun 30 07:03:39.129803 [ 3.271615] evm: security.SMACK64MMAP (disabled) Jun 30 07:03:39.129851 [ 3.276215] evm: security.apparmor Jun 30 07:03:39.141671 [ 3.279600] evm: security.ima Jun 30 07:03:39.141671 [ 3.282552] evm: security.capability Jun 30 07:03:39.141671 [ 3.286110] evm: HMAC attrs: 0x1 Jun 30 07:03:39.141671 [ 3.875609] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 07:03:39.741737 [ 3.881568] clk: Disabling unused clocks Jun 30 07:03:39.741804 [ 3.894531] Freeing unused kernel image (initmem) memory: 2048K Jun 30 07:03:39.753767 [ 3.899387] Checked W+X mappings: passed, no W+X pages found Jun 30 07:03:39.765712 [ 3.904647] Run /init as init process Jun 30 07:03:39.765770 Loading, please wait... Jun 30 07:03:39.789698 Starting systemd-udevd version 252.26-1~deb12u2 Jun 30 07:03:39.873736 [ 4.827231] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 07:03:40.693715 [ 4.852077] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 07:03:40.717691 [ 4.861247] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 07:03:40.717754 [ 4.880485] usbcore: registered new interface driver usbfs Jun 30 07:03:40.741689 [ 4.887980] Synopsys Designware Multimedia Card Interface Driver Jun 30 07:03:40.741761 [ 4.890130] usbcore: registered new interface driver hub Jun 30 07:03:40.753723 [ 4.921218] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 30 07:03:40.777760 [ 4.930070] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 30 07:03:40.789778 [ 4.937353] usbcore: registered new device driver usb Jun 30 07:03:40.789839 [ 4.942896] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 30 07:03:40.801785 [ 4.947917] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 30 07:03:40.801846 [ 4.960032] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 30 07:03:40.813742 [ 4.965052] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 30 07:03:40.825701 [ 4.988932] SCSI subsystem initialized Jun 30 07:03:40.849803 [ 4.991737] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 07:03:40.849864 [ 4.997756] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo Jun 30 07:03:40.861841 [ 5.006967] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo Jun 30 07:03:40.873664 [ 5.035313] mmc_host mmc1: card is polling. Jun 30 07:03:40.897718 [ 5.039636] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 07:03:40.897792 [ 5.073731] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 07:03:40.933700 [ 5.104976] phy phy-12130000.phy.2: phy_power_on was called before phy_init Jun 30 07:03:40.969718 [ 5.116931] phy phy-12130000.phy.2: phy_power_on was called before phy_init Jun 30 07:03:40.981680 [ 5.129016] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 30 07:03:40.993714 [ 5.130398] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 07:03:40.993769 [ 5.135809] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 30 07:03:41.005700 [ 5.148293] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 30 07:03:41.005759 [ 5.149258] exynos-ohci 12120000.usb: USB Host Controller Jun 30 07:03:41.017694 [ 5.162305] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 30 07:03:41.017750 [ 5.167968] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Jun 30 07:03:41.029717 [ 5.176786] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 30 07:03:41.041711 [ 5.176793] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 07:03:41.053697 [ 5.197791] scsi host0: ahci-dwc Jun 30 07:03:41.053747 [ 5.200827] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 110 Jun 30 07:03:41.065727 [ 5.206326] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Jun 30 07:03:41.065788 [ 5.217867] exynos-ehci 12110000.usb: irq 109, io mem 0x12110000 Jun 30 07:03:41.077765 [ 5.221773] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Jun 30 07:03:41.089763 [ 5.231623] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 30 07:03:41.089873 [ 5.240130] exynos-ohci 12120000.usb: irq 109, io mem 0x12120000 Jun 30 07:03:41.101790 [ 5.246705] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 07:03:41.101853 [ 5.252792] mmc1: new DDR MMC card at address 0001 Jun 30 07:03:41.113760 [ 5.253093] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 07:03:41.113831 [ 5.264960] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 07:03:41.125782 [ 5.266034] mmc0: new high speed SDHC card at address aaaa Jun 30 07:03:41.137732 [ 5.272131] usb usb1: Product: EHCI Host Controller Jun 30 07:03:41.137795 [ 5.282446] usb usb1: Manufacturer: Linux 6.1.0-22-armmp-lpae ehci_hcd Jun 30 07:03:41.137847 [ 5.288956] usb usb1: SerialNumber: 12110000.usb Jun 30 07:03:41.149688 [ 5.300858] hub 1-0:1.0: USB hub found Jun 30 07:03:41.161733 [ 5.301165] mmcblk1: mmc1:0001 M4G1FB 3.64 GiB Jun 30 07:03:41.161801 [ 5.303261] hub 1-0:1.0: 3 ports detected Jun 30 07:03:41.161860 [ 5.318959] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Jun 30 07:03:41.185729 [ 5.325813] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 07:03:41.185798 [ 5.332981] usb usb2: Product: USB Host Controller Jun 30 07:03:41.197708 [ 5.337750] usb usb2: Manufacturer: Linux 6.1.0-22-armmp-lpae ohci_hcd Jun 30 07:03:41.197765 [ 5.344270] usb usb2: SerialNumber: 12120000.usb Jun 30 07:03:41.197812 [ 5.352726] hub 2-0:1.0: USB hub found Jun 30 07:03:41.209712 [ 5.357153] mmcblk0: mmc0:aaaa SU04G 3.69 GiB Jun 30 07:03:41.209772 [ 5.358324] hub 2-0:1.0: 3 ports detected Jun 30 07:03:41.221709 [ 5.360217] mmcblk1: p1 p2 p3 p4 Jun 30 07:03:41.221761 [ 5.393342] mmcblk1boot0: mmc1:0001 M4G1FB 1.00 MiB Jun 30 07:03:41.245728 [ 5.408188] mmcblk1boot1: mmc1:0001 M4G1FB 1.00 MiB Jun 30 07:03:41.269706 [ 5.421385] mmcblk1rpmb: mmc1:0001 M4G1FB 128 KiB, chardev (241:0) Jun 30 07:03:41.281734 [ 5.681716] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 30 07:03:41.545758 [ 5.687303] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 30 07:03:41.545822 [ 5.693143] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 30 07:03:41.557764 [ 5.700576] ata1.00: configured for UDMA/133 Jun 30 07:03:41.557824 [ 5.704531] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 30 07:03:41.569714 [ 5.758021] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 07:03:41.617759 [ 5.788852] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 07:03:41.641731 [ 5.792934] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 07:03:41.653785 [ 5.801383] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Jun 30 07:03:41.665781 [ 5.809956] xhci-hcd xhci-hcd.2.auto: irq 111, io mem 0x12000000 Jun 30 07:03:41.665842 [ 5.816177] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 07:03:41.677815 [ 5.821411] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 07:03:41.677874 [ 5.832675] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 07:03:41.689707 [ 5.837944] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 07:03:41.701798 [ 5.846024] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 07:03:41.701860 [ 5.853223] usb usb3: Product: xHCI Host Controller Jun 30 07:03:41.713717 [ 5.858073] usb usb3: Manufacturer: Linux 6.1.0-22-armmp-lpae xhci-hcd Jun 30 07:03:41.713774 [ 5.864584] usb usb3: SerialNumber: xhci-hcd.2.auto Jun 30 07:03:41.725746 [ 5.871541] hub 3-0:1.0: USB hub found Jun 30 07:03:41.725799 [ 5.876016] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 30 07:03:41.737769 [ 5.882098] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 30 07:03:41.737873 [ 5.882472] hub 3-0:1.0: 1 port detected Jun 30 07:03:41.749719 [ 5.887927] sd 0:0:0:0: [sda] Write Protect is off Jun 30 07:03:41.749774 [ 5.891208] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 07:03:41.761796 [ 5.906664] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 30 07:03:41.773724 [ 5.907425] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 07:03:41.773788 [ 5.914926] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 30 07:03:41.785733 [ 5.923106] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Jun 30 07:03:41.785797 [ 5.937294] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 07:03:41.797729 [ 5.944487] usb usb4: Product: xHCI Host Controller Jun 30 07:03:41.797782 [ 5.949358] usb usb4: Manufacturer: Linux 6.1.0-22-armmp-lpae xhci-hcd Jun 30 07:03:41.809734 [ 5.955849] usb usb4: SerialNumber: xhci-hcd.2.auto Jun 30 07:03:41.809789 [ 5.960733] sda: sda1 sda2 < sda5 > Jun 30 07:03:41.821786 [ 5.964690] hub 4-0:1.0: USB hub found Jun 30 07:03:41.821860 [ 5.968001] sd 0:0:0:0: [sda] Attached SCSI disk Jun 30 07:03:41.821933 [ 5.976274] hub 4-0:1.0: 1 port detected Jun 30 07:03:41.833664 [ 6.092742] I/O error, dev mmcblk0, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 07:03:41.953756 [ 6.200803] I/O error, dev mmcblk0, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 07:03:42.061753 [ 6.308887] I/O error, dev mmcblk0, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 07:03:42.169737 [ 6.472428] I/O error, dev mmcblk0, sector 7743714 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 2 Jun 30 07:03:42.337710 [ 6.750430] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 07:03:42.613753 [ 6.824439] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 07:03:42.685764 [ 6.913691] random: crng init done Jun 30 07:03:42.769674 [ 6.938527] I/O error, dev mmcblk0, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 07:03:42.805690 [ 7.030499] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. Jun 30 07:03:42.889782 [ 7.041332] device-mapper: uevent: version 1.0.3 Jun 30 07:03:42.901766 [ 7.046057] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Jun 30 07:03:42.913741 [ 7.055284] I/O error, dev mmcblk0, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 07:03:42.913814 [ 7.163290] I/O error, dev mmcblk0, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 07:03:43.021761 [ 7.270913] I/O error, dev mmcblk0, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 07:03:43.129789 [ 7.278439] Buffer I/O error on dev mmcblk0, logical block 967954, async page read Jun 30 07:03:43.141747 Begin: Loading essential drivers ... done. Jun 30 07:03:43.609694 Begin: Running /scripts/init-premount ... done. Jun 30 07:03:46.621795 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 30 07:03:46.633708 Begin: Running /scripts/local-premount ... done. Jun 30 07:03:46.705713 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 30 07:03:46.765730 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 30 07:03:46.861746 /dev/mapper/arndale--metrocentre--vg-root: clean, 39331/1220608 files, 377965/4882432 blocks Jun 30 07:03:47.125690 done. Jun 30 07:03:47.149686 [ 11.415080] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 30 07:03:47.269757 [ 11.653431] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. Jun 30 07:03:47.509766 done. Jun 30 07:03:47.509819 Begin: Running /scripts/local-bottom ... done. Jun 30 07:03:47.569744 Begin: Running /scripts/init-bottom ... done. Jun 30 07:03:47.617698 [ 11.969504] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. Jun 30 07:03:47.833733 INIT: version 3.06 booting Jun 30 07:03:48.097689 INIT: No inittab.d directory found Jun 30 07:03:48.193695 Using makefile-style concurrent boot in runlevel S. Jun 30 07:03:48.577702 Starting hotplug events dispatcher: systemd-udevd. Jun 30 07:03:50.305689 Synthesizing the initial hotplug events (subsystems)...done. Jun 30 07:03:50.545716 Synthesizing the initial hotplug events (devices)...done. Jun 30 07:03:51.097715 Waiting for /dev to be fully populated...[ 15.429879] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 30 07:03:51.289722 [ 15.442424] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 07:03:51.301781 [ 15.572654] panfrost 11800000.gpu: clock rate = 533000000 Jun 30 07:03:51.433700 [ 15.612100] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jun 30 07:03:51.469737 [ 15.642884] panfrost 11800000.gpu: mali-t600 id 0x600 major 0x0 minor 0x0 status 0x1 Jun 30 07:03:51.505770 [ 15.649208] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,31b4dfff Jun 30 07:03:51.505844 [ 15.657332] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 Jun 30 07:03:51.517786 [ 15.669060] panfrost 11800000.gpu: shader_present=0xf l2_present=0x1 Jun 30 07:03:51.529729 [ 15.686078] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 0 Jun 30 07:03:51.541753 [ 15.841711] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 07:03:51.709654 [ 15.865713] usb3503 usb-hub: switched to HUB mode Jun 30 07:03:51.721750 [ 15.868961] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 07:03:51.733701 [ 15.918363] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 07:03:51.781694 [ 16.053840] I/O error, dev mmcblk0, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 07:03:51.913763 [ 16.162240] I/O error, dev mmcblk0, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 07:03:52.021761 [ 16.189854] usb 1-3: new high-speed USB device number 2 using exynos-ehci Jun 30 07:03:52.045743 [ 16.272504] I/O error, dev mmcblk0, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 07:03:52.129795 [ 16.360243] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Jun 30 07:03:52.225705 [ 16.367152] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jun 30 07:03:52.225770 [ 16.381194] I/O error, dev mmcblk0, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 07:03:52.237779 [ 16.394117] hub 1-3:1.0: USB hub found Jun 30 07:03:52.249738 [ 16.396949] hub 1-3:1.0: 3 ports detected Jun 30 07:03:52.249797 [ 16.561872] OF: graph: no port node found in /soc/hdmi@14530000 Jun 30 07:03:52.417692 [ 16.705731] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Jun 30 07:03:52.561686 [ 16.731233] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 07:03:52.597700 [ 16.807043] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 07:03:52.669866 [ 16.821176] usb 1-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=77.32 Jun 30 07:03:52.685875 [ 16.828371] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Jun 30 07:03:52.685952 [ 16.835736] usb 1-3.2: Product: USB2.0 Hub Jun 30 07:03:52.697598 [ 16.855376] hub 1-3.2:1.0: USB hub found Jun 30 07:03:52.713634 [ 16.862090] hub 1-3.2:1.0: 4 ports detected Jun 30 07:03:52.713716 [ 16.940793] I/O error, dev mmcblk0, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 07:03:52.797659 [ 17.049196] I/O error, dev mmcblk0, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 07:03:52.905666 [ 17.157258] I/O error, dev mmcblk0, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 07:03:53.017580 [ 17.169969] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 30 07:03:53.029576 [ 17.265532] I/O error, dev mmcblk0, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 07:03:53.125814 [ 17.273256] Buffer I/O error on dev mmcblk0, logical block 967954, async page read Jun 30 07:03:53.146381 [ 17.303623] usb 1-3.2.4: New USB device found, idVendor=0b95, idProduct=772a, bcdDevice= 0.01 Jun 30 07:03:53.173851 [ 17.310874] usb 1-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 30 07:03:53.173918 [ 17.318246] usb 1-3.2.4: Product: AX88772 Jun 30 07:03:53.173964 [ 17.322288] usb 1-3.2.4: Manufacturer: ASIX Elec. Corp. Jun 30 07:03:53.185709 [ 17.327480] usb 1-3.2.4: SerialNumber: 000001 Jun 30 07:03:53.185762 [ 17.923254] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 30 07:03:53.793577 [ 18.620298] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 07:03:54.489486 [ 18.635849] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Jun 30 07:03:54.501752 [ 18.647662] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 42:82:10:c0:9b:69 Jun 30 07:03:54.513491 [ 18.666000] usbcore: registered new interface driver asix Jun 30 07:03:54.525467 done. Jun 30 07:03:54.789450 [ 19.434530] EXT4-fs (dm-0): re-mounted. Quota mode: none. Jun 30 07:03:55.293584 Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). Jun 30 07:03:55.329749 Checking file systems.../dev/sda1: clean, 922/61056 files, 25376/243968 blocks Jun 30 07:03:56.937610 done. Jun 30 07:03:56.985598 Cleaning up temporary files... /tmp. Jun 30 07:03:57.321615 [ 21.646764] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 30 07:03:57.513596 [ 21.698741] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Jun 30 07:03:57.561756 [ 21.857497] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k FS Jun 30 07:03:57.729579 Mounting local filesystems...done. Jun 30 07:03:58.173620 Activating swapfile swap, if any...done. Jun 30 07:03:58.191627 Cleaning up temporary files.... Jun 30 07:03:58.233632 Starting Setting kernel variables: sysctl. Jun 30 07:03:58.413749 [ 23.101968] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Jun 30 07:03:58.965704 [ 23.157987] audit: type=1400 audit(1719731039.108:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=920 comm="apparmor_parser" Jun 30 07:03:59.025770 [ 23.173215] audit: type=1400 audit(1719731039.108:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=920 comm="apparmor_parser" Jun 30 07:03:59.049688 [ 23.200317] audit: type=1400 audit(1719731039.148:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=919 comm="apparmor_parser" Jun 30 07:03:59.073718 [ 23.561358] audit: type=1400 audit(1719731039.508:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=943 comm="apparmor_parser" Jun 30 07:03:59.433739 [ 23.580822] audit: type=1400 audit(1719731039.524:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=943 comm="apparmor_parser" Jun 30 07:03:59.445729 [ 23.594239] audit: type=1400 audit(1719731039.528:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=943 comm="apparmor_parser" Jun 30 07:03:59.469745 [ 23.905383] audit: type=1400 audit(1719731039.852:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=942 comm="apparmor_parser" Jun 30 07:03:59.781717 [ 23.925864] audit: type=1400 audit(1719731039.856:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=942 comm="apparmor_parser" Jun 30 07:03:59.793799 [ 23.941758] audit: type=1400 audit(1719731039.860:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=942 comm="apparmor_parser" Jun 30 07:03:59.817762 [ 23.959260] audit: type=1400 audit(1719731039.868:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=942 comm="apparmor_parser" Jun 30 07:03:59.829785 Starting: AppArmorLoading AppArmor profiles...done. Jun 30 07:03:59.841671 . Jun 30 07:03:59.841722 [ 25.287227] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 30 07:04:01.149677 [ 25.293274] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jun 30 07:04:01.161608 Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1 Jun 30 07:04:03.057674 Copyright 2004-2022 Internet Systems Consortium. Jun 30 07:04:03.057674 All rights reserved. Jun 30 07:04:03.069790 For info, please visit https://www.isc.org/software/dhcp/ Jun 30 07:04:03.069790 Jun 30 07:04:03.069790 Listening on LPF/eth0/9e:04:00:59:64:5a Jun 30 07:04:03.069790 Sending on LPF/eth0/9e:04:00:59:64:5a Jun 30 07:04:03.081673 Sending on Socket/fallback Jun 30 07:04:03.081673 Created duid "\000\001\000\001.\023\277\337\236\004\000YdZ". Jun 30 07:04:03.081673 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 Jun 30 07:04:03.093612 [ 28.897878] exynos4-fb 14400000.fimd: deferred probe timeout, ignoring dependency Jun 30 07:04:04.761624 [ 28.912742] exynos-mixer 14450000.mixer: deferred probe timeout, ignoring dependency Jun 30 07:04:04.773654 [ 28.921369] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations Jun 30 07:04:04.785667 [ 28.927746] exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm]) Jun 30 07:04:04.797644 [ 28.936933] exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm]) Jun 30 07:04:04.797644 [ 28.946322] exynos-drm exynos-drm: bound 14500000.dsi (ops hdmi_enable [exynosdrm]) Jun 30 07:04:04.809672 [ 28.952888] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm]) Jun 30 07:04:04.821659 [ 28.961277] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Jun 30 07:04:04.821659 [ 28.967141] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Jun 30 07:04:04.833653 [ 28.974083] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 Jun 30 07:04:04.833653 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 Jun 30 07:04:05.469663 DHCPOFFER of 10.149.64.44 from 10.149.64.4 Jun 30 07:04:05.469663 DHCPREQUEST for 10.149.64.44 on eth0 to 255.255.255.255 port 67 Jun 30 07:04:05.469663 DHCPACK of 10.149.64.44 from 10.149.64.4 Jun 30 07:04:05.481634 bound to 10.149.64.44 -- renewal in 280 seconds. Jun 30 07:04:05.481634 done. Jun 30 07:04:05.481634 Cleaning up temporary files.... Jun 30 07:04:05.517730 Starting nftables: none Jun 30 07:04:05.637689 . Jun 30 07:04:05.997684 INIT: Entering runlevel: 2 Jun 30 07:04:06.057681 Using makefile-style concurrent boot in runlevel 2. Jun 30 07:04:06.117609 Starting Apache httpd web server: apache2. Jun 30 07:04:08.253590 Starting NTP server: ntpd2024-06-30T07:04:08 ntpd[1133]: INIT: ntpd ntpsec-1.2.2: Starting Jun 30 07:04:08.673640 2024-06-30T07:04:08 ntpd[1133]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 30 07:04:08.685664 . Jun 30 07:04:08.685664 Starting periodic command scheduler: cron. Jun 30 07:04:08.913616 Starting system message bus: dbus. Jun 30 07:04:09.093568 Starting OpenBSD Secure Shell server: sshd. Jun 30 07:04:09.645613 Jun 30 07:04:10.701631 Debian GNU/Linux 12 arndale-metrocentre ttySAC2 Jun 30 07:04:10.701631 Jun 30 07:04:10.701631 arndale-metrocentre login: INIT: Switching to r INIT: No inittab.d directorUsing makefile-style concurrent boot in runlevel 6. Jun 30 07:09:09.873884 Stopping SMP IRQ Balancer: irqbalance. Jun 30 07:09:09.945816 Stopping nftables: none. Jun 30 07:09:09.945873 Stopping hotplug events dispatcher: systemd-udevd. Jun 30 07:09:09.957784 Saving the system clock to /dev/rtc0. Jun 30 07:09:11.065850 Hardware Clock updated to Sun Jun 30 07:09:11 UTC 2024. Jun 30 07:09:11.065918 Stopping Apache httpd web server: apache2. Jun 30 07:09:11.089804 Asking all remaining processes to terminate...done. Jun 30 07:09:11.641804 All processes ended within 1 seconds...done. Jun 30 07:09:11.641865 Deconfiguring network interfaces...ifdown: ignoring unknown interface eth0=eth0 Jun 30 07:09:11.749838 done. Jun 30 07:09:11.749892 [ 336.093821] EXT4-fs (sda1): unmounting filesystem. Jun 30 07:09:11.953805 Deactivating swap...done. Jun 30 07:09:12.013819 Unmounting local filesystems...done. Jun 30 07:09:12.013878 [ 336.428366] EXT4-fs (dm-0): re-mounted. Quota mode: none. Jun 30 07:09:12.289780 Will now restart. Jun 30 07:09:12.625803 [ 336.811625] asix 1-3.2.4:1.0 eth0: Link is Down Jun 30 07:09:12.665804 [ 336.878577] sd 0:0:0:0: [sda] Synchronizing SCSI cache Jun 30 07:09:12.737835 [ 336.886451] wake enabled for irq 101 (gpx1-4) Jun 30 07:09:12.737896 [ 336.889340] wake enabled for irq 102 (gpx1-5) Jun 30 07:09:12.749809 [ 336.893701] wake enabled for irq 103 (gpx1-6) Jun 30 07:09:12.749842 [ 336.898036] wake enabled for irq 104 (gpx1-7) Jun 30 07:09:12.761842 [ 336.902375] wake enabled for irq 105 (gpx2-0) Jun 30 07:09:12.761903 [ 336.906715] wake enabled for irq 106 (gpx2-1) Jun 30 07:09:12.761950 [ 336.911577] reboot: Reű Jun 30 07:09:13.097785 Jun 30 07:09:13.097839 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 07:09:13.109845 Jun 30 07:09:13.109896 CPU: Exynos5250@1000MHz Jun 30 07:09:13.109920 Jun 30 07:09:13.109941 Board: Arndale Jun 30 07:09:13.109963 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 07:09:13.121778 ready Jun 30 07:09:13.121831 DRAM: 2 GiB Jun 30 07:09:13.121874 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 07:09:13.133822 trace: enabled Jun 30 07:09:13.169776 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 07:09:13.529698 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 07:09:13.589740 In: serial Jun 30 07:09:13.589794 Out: serial Jun 30 07:09:13.589835 Err: serial Jun 30 07:09:13.589875 SCSI: ARNDALE SCSI INIT Jun 30 07:09:13.601714 Target spinup took 0 ms. Jun 30 07:09:13.601772 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 07:09:13.601822 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 07:09:13.613761 Net: Net Initialization Skipped Jun 30 07:09:13.613819 No ethernet found. Jun 30 07:09:13.613861 Hostname: arndale-metrocentre Jun 30 07:09:13.613904 Hit any key to stop autoboot: 2  1  0 Jun 30 07:09:15.545748 (Re)start USB... Jun 30 07:09:15.545826 USB0: USB EHCI 1.00 Jun 30 07:09:15.545869 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 07:09:21.149773 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 07:09:21.149863 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 07:09:21.593712 Waiting for Ethernet connection... done. Jun 30 07:09:23.189713 BOOTP broadcast 1 Jun 30 07:09:23.201681 BOOTP broadcast 2 Jun 30 07:09:27.005736 DHCP client bound to address 10.149.64.44 (3973 ms) Jun 30 07:09:27.017639 Using asx0 device Jun 30 07:09:27.017670 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 07:09:27.017697 Filename 'pxelinux.0'. Jun 30 07:09:27.017720 Load address: 0x43e00000 Jun 30 07:09:27.029576 Loading: *### Jun 30 07:09:27.041711 2.4 MiB/s Jun 30 07:09:27.041765 done Jun 30 07:09:27.041804 Bytes transferred = 42430 (a5be hex) Jun 30 07:09:27.041848 missing environment variable: pxeuuid Jun 30 07:09:27.053729 Retrieving file: pxelinux.cfg/0A95402C Jun 30 07:09:27.053787 Using asx0 device Jun 30 07:09:27.053828 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 07:09:27.053876 Filename 'pxelinux.cfg/0A95402C'. Jun 30 07:09:27.065728 Load address: 0x51000000 Jun 30 07:09:27.065784 Loading: *# Jun 30 07:09:27.065825 31.3 KiB/s Jun 30 07:09:27.065864 done Jun 30 07:09:27.065902 Bytes transferred = 65 (41 hex) Jun 30 07:09:27.065944 Config file found Jun 30 07:09:27.077706 Ignoring unknown command: serial Jun 30 07:09:27.077763 1: local Jun 30 07:09:27.077803 scanning bus for devices... Jun 30 07:09:27.077846 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 07:09:27.101745 Type: Hard Disk Jun 30 07:09:27.101800 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 07:09:27.113751 Found 1 device(s). Jun 30 07:09:27.113806 Jun 30 07:09:27.113844 SCSI device 0: Jun 30 07:09:27.113884 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 07:09:27.125716 Type: Hard Disk Jun 30 07:09:27.125772 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 07:09:27.125822 ... is now current device Jun 30 07:09:27.125864 Scanning scsi 0... Jun 30 07:09:27.137634 Found U-Boot script /boot.scr Jun 30 07:09:27.305715 1768 bytes read in 46 ms (37.1 KiB/s) Jun 30 07:09:27.365740 ## Executing script at 50000000 Jun 30 07:09:27.365796 Loading dtbs/6.10.0-rc5+/exynos5250-arndale.dtb Jun 30 07:09:27.365843 46641 bytes read in 3101 ms (14.6 KiB/s) Jun 30 07:09:30.365763 983052 bytes read in 101 ms (9.3 MiB/s) Jun 30 07:09:30.485744 Loaded xen-4.19-unstable to 0x41000000 (f000c) Jun 30 07:09:30.485803 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan Jun 30 07:09:30.497737 10785280 bytes read in 504 ms (20.4 MiB/s) Jun 30 07:09:31.001704 Loaded vmlinuz-6.10.0-rc5+ to 0x42000000 (a49200) Jun 30 07:09:31.013741 command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 07:09:31.025753 12142194 bytes read in 520 ms (22.3 MiB/s) Jun 30 07:09:31.553740 Loaded initrd.img-6.10.0-rc5+ to 0x43300000 (b94672) Jun 30 07:09:31.571270 chosen { Jun 30 07:09:31.571337 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan"; Jun 30 07:09:31.577736 #size-cells = <0x00000001>; Jun 30 07:09:31.577792 #address-cells = <0x00000001>; Jun 30 07:09:31.577836 stdout-path = "serial2:115200n8"; Jun 30 07:09:31.577879 module@1 { Jun 30 07:09:31.577918 reg = <0x43300000 0x00b94672>; Jun 30 07:09:31.589746 compatible = "xen,linux-initrd", "xen,multiboot-module"; Jun 30 07:09:31.589808 }; Jun 30 07:09:31.589847 module@0 { Jun 30 07:09:31.589886 bootargs = "ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Jun 30 07:09:31.613717 reg = <0x42000000 0x00a49200>; Jun 30 07:09:31.613774 compatible = "xen,linux-zimage", "xen,multiboot-module"; Jun 30 07:09:31.613824 }; Jun 30 07:09:31.613862 }; Jun 30 07:09:31.613899 Booting 0x41000000 - 0x43000000 Jun 30 07:09:31.625749 Kernel image @ 0x41000000 [ 0x000000 - 0x12f000 ] Jun 30 07:09:31.625809 ## Flattened Device Tree blob at 43000000 Jun 30 07:09:31.625855 Booting using the fdt blob at 0x43000000 Jun 30 07:09:31.637750 reserving fdt memory region: addr=43000000 size=c000 Jun 30 07:09:31.637811 Loading Device Tree to 4fff1000, end 4fffffff ... OK Jun 30 07:09:31.637858 Jun 30 07:09:31.649734 Starting kernel ...(fake run for tracing) Jun 30 07:09:31.649795 Jun 30 07:09:31.649834 Jun 30 07:09:31.649871 Starting kernel ... Jun 30 07:09:31.661670 Jun 30 07:09:31.661722 __ __ _ _ _ ___ _ _ _ Jun 30 07:09:31.709724 \ \/ /___ _ __ | || | / |/ _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Jun 30 07:09:31.709787 \ // _ \ '_ \ | || |_ | | (_) |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Jun 30 07:09:31.721749 / \ __/ | | | |__ _|| |\__, |__| |_| | | | \__ \ || (_| | |_) | | __/ Jun 30 07:09:31.721810 /_/\_\___|_| |_| |_|(_)_| /_/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Jun 30 07:09:31.733752 Jun 30 07:09:31.733802 (XEN) Xen version 4.19-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Sun Jun 30 01:52:15 UTC 2024 Jun 30 07:09:31.745732 (XEN) Latest ChangeSet: Wed Jun 26 16:07:30 2024 +0100 git:08f9b1dd9c Jun 30 07:09:31.745795 (XEN) build-id: a1f1bc3a5986d3ec30239a56d95725b8f32801f2 Jun 30 07:09:31.757757 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Jun 30 07:09:31.757821 (XEN) 32-bit Execution: Jun 30 07:09:31.769736 (XEN) Processor Features: 00001031:00011011 Jun 30 07:09:31.769795 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Jun 30 07:09:31.769844 (XEN) Extensions: GenericTimer Security Jun 30 07:09:31.781747 (XEN) Debug Features: 02010555 Jun 30 07:09:31.781803 (XEN) Auxiliary Features: 00000000 Jun 30 07:09:31.781847 (XEN) Memory Model Features: 10201105 20000000 Jun 30 07:09:31.793704 (XEN) 01240000 02102211 Jun 30 07:09:31.793761 (XEN) ISA Features: 02101110 13112111 21232041 Jun 30 07:09:31.793808 (XEN) 11112131 10011142 00000000 Jun 30 07:09:31.805746 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Jun 30 07:09:31.817732 (XEN) Set SYSRAM to 0000000041000074 (00200074) Jun 30 07:09:31.817791 (XEN) SMP: Allowing 2 CPUs Jun 30 07:09:31.817834 (XEN) enabled workaround for: ARM erratum 766422 Jun 30 07:09:31.817880 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Jun 30 07:09:31.829760 (XEN) GICv2 initialization: Jun 30 07:09:31.829817 (XEN) gic_dist_addr=0000000010481000 Jun 30 07:09:31.829862 (XEN) gic_cpu_addr=0000000010482000 Jun 30 07:09:31.841746 (XEN) gic_hyp_addr=0000000010484000 Jun 30 07:09:31.841804 (XEN) gic_vcpu_addr=0000000010486000 Jun 30 07:09:31.841849 (XEN) gic_maintenance_irq=25 Jun 30 07:09:31.853746 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Jun 30 07:09:31.853807 (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2) Jun 30 07:09:31.865737 (XEN) Initializing Credit2 scheduler Jun 30 07:09:31.865795 (XEN) load_precision_shift: 18 Jun 30 07:09:31.865839 (XEN) load_window_shift: 30 Jun 30 07:09:31.865881 (XEN) underload_balance_tolerance: 0 Jun 30 07:09:31.877739 (XEN) overload_balance_tolerance: -3 Jun 30 07:09:31.877796 (XEN) runqueues arrangement: socket Jun 30 07:09:31.877841 (XEN) cap enforcement granularity: 10ms Jun 30 07:09:31.877885 (XEN) load tracking window length 1073741824 ns Jun 30 07:09:31.889748 (XEN) Allocated console ring of 16 KiB. Jun 30 07:09:31.889806 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Jun 30 07:09:31.901747 (XEN) CPU0: Guest atomics will try 2 times before pausing the domain Jun 30 07:09:31.901811 (XEN) Bringing up CPU1 Jun 30 07:09:31.901854 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Jun 30 07:09:31.913748 (XEN) Brought up 2 CPUs Jun 30 07:09:31.913803 (XEN) CPU 1 booted. Jun 30 07:09:31.913845 (XEN) I/O virtualisation disabled Jun 30 07:09:31.913888 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Jun 30 07:09:31.925757 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Jun 30 07:09:31.925818 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Jun 30 07:09:31.937642 (XEN) Initializing Credit2 scheduler Jun 30 07:09:31.937684 (XEN) load_precision_shift: 18 Jun 30 07:09:31.937709 (XEN) load_window_shift: 30 Jun 30 07:09:31.937732 (XEN) underload_balance_tolerance: 0 Jun 30 07:09:31.949740 (XEN) overload_balance_tolerance: -3 Jun 30 07:09:31.949798 (XEN) runqueues arrangement: socket Jun 30 07:09:31.949842 (XEN) cap enforcement granularity: 10ms Jun 30 07:09:31.961749 (XEN) load tracking window length 1073741824 ns Jun 30 07:09:31.961810 (XEN) Adding cpu 0 to runqueue 0 Jun 30 07:09:31.961855 (XEN) First cpu on runqueue, activating Jun 30 07:09:31.961899 (XEN) Adding cpu 1 to runqueue 0 Jun 30 07:09:31.973754 (XEN) alternatives: Patching with alt table 002c2f84 -> 002c305c Jun 30 07:09:31.973817 (XEN) CPU0 will execute ICIALLU on guest exit Jun 30 07:09:31.985734 (XEN) CPU1 will execute ICIALLU on guest exit Jun 30 07:09:31.985794 (XEN) *** LOADING DOMAIN 0 *** Jun 30 07:09:31.985838 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Jun 30 07:09:31.997734 (XEN) Loading ramdisk from boot module @ 0000000043300000 Jun 30 07:09:31.997795 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Jun 30 07:09:31.997842 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Jun 30 07:09:32.573731 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Jun 30 07:09:32.573797 (XEN) Allocating PPI 16 for event channel interrupt Jun 30 07:09:32.609736 (XEN) d0: extended regions not supported for 32-bit guests Jun 30 07:09:32.609798 (XEN) Loading zImage from 0000000042000000 to 0000000067400000-0000000067e49200 Jun 30 07:09:32.621692 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d94672 Jun 30 07:09:32.717756 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b499 Jun 30 07:09:32.813727 (XEN) Initial low memory virq threshold set at 0x4000 pages. Jun 30 07:09:32.825744 (XEN) Scrubbing Free RAM in background Jun 30 07:09:32.825802 (XEN) Std. Loglevel: All Jun 30 07:09:32.825845 (XEN) Guest Loglevel: All Jun 30 07:09:32.825886 (XEN) *************************************************** Jun 30 07:09:32.837747 (XEN) WARNING: SILO mode is not enabled. Jun 30 07:09:32.837805 (XEN) It has implications on the security of the system, Jun 30 07:09:32.849745 (XEN) unless the communications have been forbidden between Jun 30 07:09:32.849806 (XEN) untrusted domains. Jun 30 07:09:32.849849 (XEN) *************************************************** Jun 30 07:09:32.861684 (XEN) 3... 2... 1... Jun 30 07:09:35.861740 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 30 07:09:35.861818 (XEN) Freed 352kB init memory. Jun 30 07:09:35.873681 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 07:09:37.001702 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Jun 30 07:09:37.021119 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Jun 30 07:09:37.025751 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Jun 30 07:09:37.025814 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Jun 30 07:09:37.037732 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 07:09:37.037794 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 07:09:37.085747 [ 0.000000] Linux version 6.10.0-rc5+ (osstest@himrod0) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Sun Jun 30 01:19:39 UTC 2024 Jun 30 07:09:37.097751 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 30 07:09:37.109756 [ 0.000000] CPU: div instructions available: patching division code Jun 30 07:09:37.109833 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 07:09:37.121817 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 07:09:37.121888 [ 0.000000] Memory policy: Data cache writealloc Jun 30 07:09:37.133749 [ 0.000000] Xen 4.19 support found Jun 30 07:09:37.133806 [ 0.000000] efi: UEFI not found. Jun 30 07:09:37.133877 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 on node -1 Jun 30 07:09:37.145757 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 07:09:37.145816 [ 0.000000] Zone ranges: Jun 30 07:09:37.145858 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Jun 30 07:09:37.157756 [ 0.000000] Normal empty Jun 30 07:09:37.157812 [ 0.000000] HighMem empty Jun 30 07:09:37.157855 [ 0.000000] Movable zone start for each node Jun 30 07:09:37.169793 [ 0.000000] Early memory node ranges Jun 30 07:09:37.169851 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Jun 30 07:09:37.181743 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Jun 30 07:09:37.181807 [ 0.000000] psci: probing for conduit method from DT. Jun 30 07:09:37.193747 [ 0.000000] psci: PSCIv1.1 detected in firmware. Jun 30 07:09:37.193807 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Jun 30 07:09:37.193855 [ 0.000000] psci: Trusted OS migration not required Jun 30 07:09:37.205753 [ 0.000000] psci: SMC Calling Convention v1.2 Jun 30 07:09:37.205806 [ 0.000000] percpu: Embedded 18 pages/cpu s41428 r8192 d24108 u73728 Jun 30 07:09:37.217712 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 07:09:37.229772 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 07:09:37.241756 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Jun 30 07:09:37.253748 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 131072 Jun 30 07:09:37.253812 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Jun 30 07:09:37.265749 [ 0.000000] Memory: 414600K/524288K available (15360K kernel code, 2268K rwdata, 6084K rodata, 2048K init, 439K bss, 44152K reserved, 65536K cma-reserved, 0K highmem) Jun 30 07:09:37.277751 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 07:09:37.277814 [ 0.000000] trace event string verifier disabled Jun 30 07:09:37.289746 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 07:09:37.289806 [ 0.000000] rcu: RCU event tracing is enabled. Jun 30 07:09:37.301746 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Jun 30 07:09:37.301811 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Jun 30 07:09:37.313751 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 07:09:37.313815 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 07:09:37.325742 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 07:09:37.325806 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 07:09:37.337755 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Jun 30 07:09:37.337818 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 07:09:37.349764 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 07:09:37.361772 [ 0.000013] Switching to timer-based delay loop, resolution 41ns Jun 30 07:09:37.373736 [ 0.000549] Console: colour dummy device 80x30 Jun 30 07:09:37.373796 [ 0.000567] printk: legacy console [hvc0] enabled Jun 30 07:09:37.373843 [ 0.299562] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Jun 30 07:09:37.385753 [ 0.309961] CPU: Testing write buffer coherency: ok Jun 30 07:09:37.397747 [ 0.314903] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 07:09:37.397819 [ 0.324456] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 07:09:37.409776 [ 0.330888] pid_max: default: 32768 minimum: 301 Jun 30 07:09:37.409837 [ 0.335655] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 07:09:37.421757 [ 0.342936] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 07:09:37.433747 [ 0.351360] /cpus/cpu@0 missing clock-frequency property Jun 30 07:09:37.433807 [ 0.356139] /cpus/cpu@1 missing clock-frequency property Jun 30 07:09:37.445741 [ 0.361557] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 07:09:37.445805 [ 0.368254] xen:grant_table: Grant tables using version 1 layout Jun 30 07:09:37.445855 [ 0.373389] Grant table initialized Jun 30 07:09:37.457751 [ 0.376945] xen:events: Using FIFO-based ABI Jun 30 07:09:37.457811 [ 0.381243] Xen: initializing cpu0 Jun 30 07:09:37.457856 [ 0.384766] Setting up static identity map for 0x60300000 - 0x603000ac Jun 30 07:09:37.469748 [ 0.392558] rcu: Hierarchical SRCU implementation. Jun 30 07:09:37.469809 [ 0.396160] rcu: Max phase no-delay instances is 1000. Jun 30 07:09:37.481748 [ 0.404396] EFI services will not be available. Jun 30 07:09:37.481807 [ 0.407717] smp: Bringing up secondary CPUs ... Jun 30 07:09:37.493707 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 07:09:37.565747 [ 0.481968] Xen: initializing cpu1 Jun 30 07:09:37.565805 [ 0.482126] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 07:09:37.565854 [ 0.482150] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 07:09:37.577754 [ 0.501113] smp: Brought up 1 node, 2 CPUs Jun 30 07:09:37.577812 [ 0.504782] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 07:09:37.589755 [ 0.511068] CPU: All CPU(s) started in SVC mode. Jun 30 07:09:37.589815 [ 0.516988] devtmpfs: initialized Jun 30 07:09:37.601689 [ 0.529366] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 07:09:37.613749 [ 0.535922] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Jun 30 07:09:37.625761 [ 0.545593] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 07:09:37.625825 [ 0.553489] pinctrl core: initialized pinctrl subsystem Jun 30 07:09:37.637736 [ 0.560124] DMI not present or invalid. Jun 30 07:09:37.637794 [ 0.563638] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 07:09:37.649761 [ 0.570252] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 07:09:37.649841 [ 0.579585] thermal_sys: Registered thermal governor 'step_wise' Jun 30 07:09:37.661748 [ 0.579740] software IO TLB: area num 2. Jun 30 07:09:37.661807 [ 0.588412] software IO TLB: only able to allocate 8 MB Jun 30 07:09:37.673737 [ 0.595485] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Jun 30 07:09:37.673800 [ 0.600686] No ATAGs? Jun 30 07:09:37.685743 [ 0.602992] hw-breakpoint: Failed to enable monitor mode on CPU 0. Jun 30 07:09:37.685808 [ 0.611693] Serial: AMBA PL011 UART driver Jun 30 07:09:37.697630 [ 0.658316] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 65 Jun 30 07:09:37.745691 [ 0.686749] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 30 07:09:37.769849 [ 0.710688] xen:balloon: Initialising balloon driver Jun 30 07:09:37.793819 [ 0.717128] iommu: Default domain type: Translated Jun 30 07:09:37.793880 [ 0.720540] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 07:09:37.805819 [ 0.729326] SCSI subsystem initialized Jun 30 07:09:37.805878 [ 0.732088] usbcore: registered new interface driver usbfs Jun 30 07:09:37.817837 [ 0.737319] usbcore: registered new interface driver hub Jun 30 07:09:37.817898 [ 0.742661] usbcore: registered new device driver usb Jun 30 07:09:37.829750 [ 0.749379] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 07:09:37.829812 [ 0.752972] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 07:09:37.841770 [ 0.759231] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 07:09:37.841833 [ 0.764293] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 07:09:37.841881 [ 0.769222] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 07:09:37.853754 [ 0.775262] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 07:09:37.853815 [ 0.781038] pps_core: LinuxPPS API ver. 1 registered Jun 30 07:09:37.865742 [ 0.785431] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 07:09:37.877747 [ 0.794658] PTP clock support registered Jun 30 07:09:37.877807 [ 0.798894] EDAC MC: Ver: 3.0.0 Jun 30 07:09:37.877852 [ 0.802152] scmi_core: SCMI protocol bus registered Jun 30 07:09:37.889728 [ 0.808850] vgaarb: loaded Jun 30 07:09:37.889785 [ 0.812041] clocksource: Switched to clocksource arch_sys_counter Jun 30 07:09:37.889835 [ 0.829164] NET: Registered PF_INET protocol family Jun 30 07:09:37.913815 [ 0.832837] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Jun 30 07:09:37.913917 [ 0.840706] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 07:09:37.925754 [ 0.848425] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 07:09:37.937761 [ 0.856209] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Jun 30 07:09:37.937864 [ 0.864044] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Jun 30 07:09:37.949762 [ 0.871319] TCP: Hash tables configured (established 4096 bind 4096) Jun 30 07:09:37.961767 [ 0.877692] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 07:09:37.961831 [ 0.884260] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 07:09:37.973738 [ 0.891356] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 07:09:37.973802 [ 0.897514] RPC: Registered named UNIX socket transport module. Jun 30 07:09:37.985739 [ 0.902996] RPC: Registered udp transport module. Jun 30 07:09:37.985800 [ 0.907751] RPC: Registered tcp transport module. Jun 30 07:09:37.985846 [ 0.912546] RPC: Registered tcp-with-tls transport module. Jun 30 07:09:37.997750 [ 0.918100] RPC: Registered tcp NFSv4.1 backchannel transport module. Jun 30 07:09:37.997813 [ 0.924612] PCI: CLS 0 bytes, default 64 Jun 30 07:09:38.009744 [ 0.930015] Initialise system trusted keyrings Jun 30 07:09:38.009804 [ 0.933328] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Jun 30 07:09:38.021738 [ 0.939852] squashfs: version 4.0 (2009/01/31) Phillip Lougher Jun 30 07:09:38.021801 [ 0.945739] NFS: Registering the id_resolver key type Jun 30 07:09:38.033739 [ 0.950680] Key type id_resolver registered Jun 30 07:09:38.033799 [ 0.954897] Key type id_legacy registered Jun 30 07:09:38.033845 [ 0.959002] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Jun 30 07:09:38.045734 [ 0.965758] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Jun 30 07:09:38.045802 [ 0.973472] Trying to unpack rootfs image as initramfs... Jun 30 07:09:38.057714 [ 0.994827] Key type asymmetric registered Jun 30 07:09:38.081741 [ 0.997570] Asymmetric key parser 'x509' registered Jun 30 07:09:38.081802 [ 1.002635] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) Jun 30 07:09:38.093743 [ 1.009983] io scheduler mq-deadline registered Jun 30 07:09:38.093803 [ 1.014603] io scheduler kyber registered Jun 30 07:09:38.093849 [ 1.018711] io scheduler bfq registered Jun 30 07:09:38.105682 [ 1.160078] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 07:09:38.249735 [ 1.166328] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 07:09:38.249807 [ 1.199031] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 07:09:38.285764 [ 1.205310] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 07:09:38.297673 [ 1.254935] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 07:09:38.333741 [ 1.261148] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 07:09:38.345749 [ 1.293737] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 07:09:38.381756 [ 1.299947] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 07:09:38.381827 [ 1.312780] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 07:09:38.393744 [ 1.363503] xen:xen_evtchn: Event-channel device installed Jun 30 07:09:38.441728 [ 1.477017] Freeing initrd memory: 11860K Jun 30 07:09:38.561639 [ 1.514994] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 07:09:38.597737 [ 1.525947] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 07:09:38.609774 [ 1.534154] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 07:09:38.621760 [ 1.543050] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 07:09:38.633766 [ 1.552045] SuperH (H)SCI(F) driver initialized Jun 30 07:09:38.633826 [ 1.556340] STMicroelectronics ASC driver initialized Jun 30 07:09:38.633873 [ 1.561213] STM32 USART driver initialized Jun 30 07:09:38.645742 [ 1.566625] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 07:09:38.645807 [ 1.575522] random: crng init done Jun 30 07:09:38.657729 [ 1.583065] brd: module loaded Jun 30 07:09:38.657785 [ 1.588996] loop: module loaded Jun 30 07:09:38.669695 [ 1.609469] Invalid max_queues (4), will use default max: 2. Jun 30 07:09:38.693710 [ 1.628076] tun: Universal TUN/TAP device driver, 1.6 Jun 30 07:09:38.705720 [ 1.631930] CAN device driver interface Jun 30 07:09:38.717718 [ 1.637131] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Jun 30 07:09:38.717781 [ 1.648255] xen_netfront: Initialising Xen virtual ethernet driver Jun 30 07:09:38.729737 [ 1.653124] pegasus: Pegasus/Pegasus II USB Ethernet driver Jun 30 07:09:38.741745 [ 1.658728] usbcore: registered new interface driver pegasus Jun 30 07:09:38.741808 [ 1.664466] usbcore: registered new interface driver asix Jun 30 07:09:38.753727 [ 1.669942] usbcore: registered new interface driver ax88179_178a Jun 30 07:09:38.753791 [ 1.676095] usbcore: registered new interface driver cdc_ether Jun 30 07:09:38.765749 [ 1.682012] usbcore: registered new interface driver smsc75xx Jun 30 07:09:38.765812 [ 1.687809] usbcore: registered new interface driver smsc95xx Jun 30 07:09:38.777736 [ 1.693635] usbcore: registered new interface driver net1080 Jun 30 07:09:38.777800 [ 1.699349] usbcore: registered new interface driver cdc_subset Jun 30 07:09:38.777850 [ 1.705348] usbcore: registered new interface driver zaurus Jun 30 07:09:38.789744 [ 1.710984] usbcore: registered new interface driver cdc_ncm Jun 30 07:09:38.789806 [ 1.720373] usbcore: registered new interface driver usb-storage Jun 30 07:09:38.801705 [ 1.730883] i2c_dev: i2c /dev entries driver Jun 30 07:09:38.813712 [ 1.749192] device-mapper: uevent: version 1.0.3 Jun 30 07:09:38.825707 [ 1.752671] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev Jun 30 07:09:38.837773 [ 1.762250] cpu cpu0: OPP table can't be empty Jun 30 07:09:38.849742 [ 1.766940] failed to register cpuidle driver Jun 30 07:09:38.849802 [ 1.770319] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Jun 30 07:09:38.861739 [ 1.778685] sdhci: Secure Digital Host Controller Interface driver Jun 30 07:09:38.861804 [ 1.783696] sdhci: Copyright(c) Pierre Ossman Jun 30 07:09:38.861872 [ 1.791772] sdhci-pltfm: SDHCI platform and OF driver helper Jun 30 07:09:38.873821 [ 1.802094] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 07:09:38.885754 [ 1.807541] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Jun 30 07:09:38.885818 [ 1.814390] usbcore: registered new interface driver usbhid Jun 30 07:09:38.897747 [ 1.818875] usbhid: USB HID core driver Jun 30 07:09:38.897805 [ 1.829863] NET: Registered PF_INET6 protocol family Jun 30 07:09:38.909737 [ 1.834373] Segment Routing with IPv6 Jun 30 07:09:38.909795 [ 1.837215] In-situ OAM (IOAM) with IPv6 Jun 30 07:09:38.921747 [ 1.841235] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Jun 30 07:09:38.921809 [ 1.847730] NET: Registered PF_PACKET protocol family Jun 30 07:09:38.933751 [ 1.852377] can: controller area network core Jun 30 07:09:38.933810 [ 1.856751] NET: Registered PF_CAN protocol family Jun 30 07:09:38.945836 [ 1.861603] can: raw protocol Jun 30 07:09:38.945894 [ 1.864636] can: broadcast manager protocol Jun 30 07:09:38.945941 [ 1.868877] can: netlink gateway - max_hops=1 Jun 30 07:09:38.945987 [ 1.873634] Key type dns_resolver registered Jun 30 07:09:38.957972 [ 1.878320] ThumbEE CPU extension supported. Jun 30 07:09:38.958032 [ 1.881984] Registering SWP/SWPB emulation handler Jun 30 07:09:38.969696 [ 1.896418] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level Jun 30 07:09:38.981750 [ 1.903318] Loading compiled-in X.509 certificates Jun 30 07:09:38.981810 [ 1.946494] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 07:09:39.029743 [ 1.950093] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 07:09:39.029804 [ 1.957047] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 07:09:39.041759 [ 1.964896] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 07:09:39.053745 [ 2.006297] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 07:09:39.089771 [ 2.015178] s5m-rtc s5m-rtc: setting system clock to 2024-06-30T07:09:40 UTC (1719731380) Jun 30 07:09:39.101708 [ 2.026285] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 07:09:39.113743 [ 2.030891] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 07:09:39.113804 [ 2.035331] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 07:09:39.113853 [ 2.042099] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 07:09:39.125746 [ 2.047913] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 07:09:39.125810 [ 2.054145] clk: Not disabling unused clocks Jun 30 07:09:39.137745 [ 2.057585] PM: genpd: Disabling unused power domains Jun 30 07:09:39.137806 [ 2.066143] Freeing unused kernel image (initmem) memory: 2048K Jun 30 07:09:39.149731 [ 2.072491] Run /init as init process Jun 30 07:09:39.149789 Loading, please wait... Jun 30 07:09:39.173592 Starting systemd-udevd version 252.26-1~deb12u2 Jun 30 07:09:39.245720 [ 3.269081] i2c-gpio i2c-10: using lines 552 (SDA) and 553 (SCL) Jun 30 07:09:40.349733 [ 3.465947] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 07:09:40.553749 [ 3.473897] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 07:09:40.565717 [ 3.489436] Synopsys Designware Multimedia Card Interface Driver Jun 30 07:09:40.577687 [ 3.506322] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 30 07:09:40.589757 [ 3.512180] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 07:09:40.601704 [ 3.532444] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 30 07:09:40.613749 [ 3.554905] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 30 07:09:40.637787 [ 3.559993] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 30 07:09:40.649760 [ 3.565564] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 125,32 bit host data width,128 deep fifo Jun 30 07:09:40.649862 [ 3.576435] mmc_host mmc0: card is polling. Jun 30 07:09:40.661737 [ 3.584001] phy phy-12130000.phy.9: phy_power_on was called before phy_init Jun 30 07:09:40.673736 [ 3.589619] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 07:09:40.673799 [ 3.595211] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Jun 30 07:09:40.685760 [ 3.603044] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 30 07:09:40.685824 [ 3.609419] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 30 07:09:40.697721 [ 3.612549] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 30 07:09:40.697893 [ 3.614989] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo Jun 30 07:09:40.709773 [ 3.622727] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 30 07:09:40.721762 [ 3.632963] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 07:09:40.721834 [ 3.639703] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 30 07:09:40.733740 [ 3.674064] exynos-ehci 12110000.usb: irq 127, io mem 0x12110000 Jun 30 07:09:40.757765 [ 3.678829] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 07:09:40.769718 [ 3.712908] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 07:09:40.793739 [ 3.719855] hub 1-0:1.0: USB hub found Jun 30 07:09:40.805735 [ 3.723352] phy phy-12130000.phy.9: phy_power_on was called before phy_init Jun 30 07:09:40.805800 [ 3.729286] exynos-ohci 12120000.usb: USB Host Controller Jun 30 07:09:40.817753 [ 3.737032] hub 1-0:1.0: 3 ports detected Jun 30 07:09:40.817812 [ 3.739206] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 07:09:40.817860 [ 3.742826] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Jun 30 07:09:40.829754 [ 3.752837] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 30 07:09:40.841772 [ 3.759680] ahci-dwc 122f0000.sata: AHCI vers 0001.0300, 32 command slots, 6 Gbps, platform mode Jun 30 07:09:40.841844 [ 3.768870] ahci-dwc 122f0000.sata: 1/1 ports implemented (port mask 0x1) Jun 30 07:09:40.853722 [ 3.775745] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 30 07:09:40.865715 [ 3.802080] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Jun 30 07:09:40.889763 [ 3.807026] exynos-ohci 12120000.usb: irq 127, io mem 0x12120000 Jun 30 07:09:40.889826 [ 3.808886] s3c-rtc 101e0000.rtc: registered as rtc1 Jun 30 07:09:40.901696 [ 3.880917] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 30 07:09:40.961723 [ 3.893204] scsi host0: ahci-dwc Jun 30 07:09:40.973706 [ 3.915608] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 07:09:40.997776 [ 3.924159] mmc1: new high speed SDHC card at address aaaa Jun 30 07:09:41.009745 [ 3.926690] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 128 lpm-pol 0 Jun 30 07:09:41.021716 [ 3.929858] mmc0: new DDR MMC card at address 0001 Jun 30 07:09:41.021776 [ 3.963730] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Jun 30 07:09:41.045745 [ 3.967593] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Jun 30 07:09:41.045804 [ 3.974512] mmcblk0: p1 p2 p3 p4 Jun 30 07:09:41.057747 [ 3.978743] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Jun 30 07:09:41.057807 [ 3.984212] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Jun 30 07:09:41.069705 [ 4.000563] hub 2-0:1.0: USB hub found Jun 30 07:09:41.081725 [ 4.005024] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Jun 30 07:09:41.093727 [ 4.008754] hub 2-0:1.0: 3 ports detected Jun 30 07:09:41.093787 [ 4.452163] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 30 07:09:41.537776 [ 4.457914] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 30 07:09:41.537842 [ 4.463835] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 30 07:09:41.549777 [ 4.471939] ata1.00: configured for UDMA/133 Jun 30 07:09:41.549837 [ 4.475389] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 30 07:09:41.561748 [ 4.485074] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 30 07:09:41.573747 [ 4.491215] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 30 07:09:41.573808 [ 4.497501] sd 0:0:0:0: [sda] Write Protect is off Jun 30 07:09:41.573855 [ 4.501878] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 30 07:09:41.585743 [ 4.510747] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 30 07:09:41.597695 [ 4.538740] sda: sda1 sda2 < sda5 > Jun 30 07:09:41.621740 [ 4.541674] sd 0:0:0:0: [sda] Attached SCSI disk Jun 30 07:09:41.621812 [ 4.679021] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Jun 30 07:09:41.765757 [ 4.686859] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 07:09:41.765820 [ 4.690994] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 07:09:41.777770 [ 4.700434] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002000010 Jun 30 07:09:41.789770 [ 4.708829] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Jun 30 07:09:41.789833 [ 4.718445] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 07:09:41.801716 [ 4.723703] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 07:09:41.813775 [ 4.736930] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 07:09:41.825733 [ 4.748232] hub 3-0:1.0: USB hub found Jun 30 07:09:41.825792 [ 4.750967] hub 3-0:1.0: 1 port detected Jun 30 07:09:41.837761 [ 4.755729] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 07:09:41.837832 [ 4.763992] hub 4-0:1.0: USB hub found Jun 30 07:09:41.849707 [ 4.766818] hub 4-0:1.0: 1 port detected Jun 30 07:09:41.849766 [ 4.830774] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 07:09:41.921679 [ 5.001497] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 07:09:42.089725 [ 5.138970] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 07:09:42.221763 [ 5.247255] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 07:09:42.329755 [ 5.355591] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 07:09:42.437763 [ 5.463899] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 07:09:42.545761 [ 5.638586] I/O error, dev mmcblk1, sector 7743713 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 Jun 30 07:09:42.725692 [ 5.972372] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 07:09:43.061687 [ 6.141680] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 07:09:43.229697 [ 6.256053] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 07:09:43.337784 [ 6.363792] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 07:09:43.445753 [ 6.471503] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 07:09:43.553766 [ 6.579249] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 07:09:43.661780 [ 6.586875] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 07:09:43.673733 Begin: Loading essential drivers ... done. Jun 30 07:09:43.733714 Begin: Running /scripts/init-premount ... done. Jun 30 07:09:46.745732 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 30 07:09:46.757722 Begin: Running /scripts/local-premount ... done. Jun 30 07:09:46.757781 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 30 07:09:46.829682 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 30 07:09:46.937710 /dev/mapper/arndale--metrocentre--vg-root: clean, 46073/1220608 files, 606026/4882432 blocks Jun 30 07:09:47.189726 done. Jun 30 07:09:47.213688 [ 10.139582] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 30 07:09:47.225726 [ 10.480130] EXT4-fs (dm-0): mounted filesystem 9a2c23c3-c633-42fb-a651-f46dd527031e ro with ordered data mode. Quota mode: disabled. Jun 30 07:09:47.573694 done. Jun 30 07:09:47.573746 Begin: Running /scripts/local-bottom ... done. Jun 30 07:09:47.621714 Begin: Running /scripts/init-bottom ... done. Jun 30 07:09:47.669641 INIT: version 3.06 booting Jun 30 07:09:48.053699 INIT: No inittab.d directory found Jun 30 07:09:48.125713 Using makefile-style concurrent boot in runlevel S. Jun 30 07:09:48.473703 Starting hotplug events dispatcher: systemd-udevd. Jun 30 07:09:50.129744 Synthesizing the initial hotplug events (subsystems)...done. Jun 30 07:09:50.589717 Synthesizing the initial hotplug events (devices)...done. Jun 30 07:09:51.417705 Waiting for /dev to be fully populated...[ 14.436342] usb3503 usb-hub: switched to HUB mode Jun 30 07:09:51.513735 [ 14.439814] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 07:09:51.525709 [ 14.517117] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 30 07:09:51.597757 [ 14.525447] s5p-secss 10830000.sss: s5p-sss driver registered Jun 30 07:09:51.609708 [ 14.543489] mc: Linux media interface: v0.10 Jun 30 07:09:51.621715 [ 14.727851] videodev: Linux video capture interface: v2.00 Jun 30 07:09:51.813690 [ 14.992078] usb 1-3: new high-speed USB device number 2 using exynos-ehci Jun 30 07:09:52.077707 [ 15.081286] s5p-mfc 11000000.codec: Adding to iommu group 0 Jun 30 07:09:52.161715 [ 15.095450] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Jun 30 07:09:52.185686 [ 15.112351] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 07:09:52.197758 [ 15.120319] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 07:09:52.209782 [ 15.128814] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 07:09:52.221749 [ 15.139615] s5p-mfc 11000000.codec: decoder registered as /dev/video0 Jun 30 07:09:52.221813 [ 15.146794] s5p-mfc 11000000.codec: encoder registered as /dev/video1 Jun 30 07:09:52.233703 [ 15.193492] hub 1-3:1.0: USB hub found Jun 30 07:09:52.269717 [ 15.196097] hub 1-3:1.0: 3 ports detected Jun 30 07:09:52.281660 [ 15.228667] exynos-gsc 13e00000.gsc: Adding to iommu group 1 Jun 30 07:09:52.305727 [ 15.272681] exynos-gsc 13e10000.gsc: Adding to iommu group 2 Jun 30 07:09:52.353686 [ 15.282522] exynos-gsc 13e20000.gsc: Adding to iommu group 3 Jun 30 07:09:52.365676 [ 15.293584] exynos-gsc 13e30000.gsc: Adding to iommu group 4 Jun 30 07:09:52.377717 [ 15.342366] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 07:09:52.425721 [ 15.382837] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Jun 30 07:09:52.461713 [ 15.408474] wm8994 3-001a: Device is not a WM8994, ID is 0 Jun 30 07:09:52.485737 [ 15.418022] wm8994 3-001a: probe with driver wm8994 failed with error -22 Jun 30 07:09:52.497726 [ 15.540655] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 07:09:52.629817 [ 15.549356] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Jun 30 07:09:52.645968 [ 15.688053] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 07:09:52.773733 [ 15.712800] hub 1-3.2:1.0: USB hub found Jun 30 07:09:52.797726 [ 15.716070] hub 1-3.2:1.0: 4 ports detected Jun 30 07:09:52.797786 [ 15.798938] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 07:09:52.881753 [ 15.910688] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 07:09:53.001687 [ 16.019165] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 07:09:53.109753 [ 16.022108] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 07:09:53.109826 [ 16.026859] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 07:09:53.121803 [ 16.045038] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 07:09:53.133751 [ 16.060088] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 07:09:53.145736 [ 16.067785] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 07:09:53.157760 [ 16.072098] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 30 07:09:53.157824 [ 16.076478] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 07:09:53.169755 [ 16.214614] I/O error, dev mmcblk1, sector 7743713 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 Jun 30 07:09:53.301717 [ 16.255213] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 30 07:09:53.337747 [ 16.412082] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 07:09:53.493765 [ 16.591800] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 07:09:53.673762 [ 16.904092] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 07:09:53.985770 [ 16.923962] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 07:09:54.009682 [ 16.938208] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Jun 30 07:09:54.021808 [ 16.948099] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, aa:5b:ab:89:e8:ab Jun 30 07:09:54.033745 [ 16.987066] usbcore: registered new device driver onboard-usb-dev Jun 30 07:09:54.069754 [ 16.994169] usb 1-3.2.4: USB disconnect, device number 4 Jun 30 07:09:54.081737 [ 16.998430] asix 1-3.2.4:1.0 eth0: unregister 'asix' usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet Jun 30 07:09:54.081810 [ 17.101420] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 07:09:54.189718 [ 17.172923] hub 1-3.2:1.0: USB hub found Jun 30 07:09:54.249724 [ 17.175892] hub 1-3.2:1.0: 4 ports detected Jun 30 07:09:54.261681 [ 17.189047] hub 1-3.2:1.0: USB hub found Jun 30 07:09:54.273719 [ 17.192197] hub 1-3.2:1.0: 4 ports detected Jun 30 07:09:54.273783 [ 17.215813] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 07:09:54.297790 [ 17.326177] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 07:09:54.417683 [ 17.434022] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 07:09:54.525637 [ 17.522115] usb 1-3.2.4: new high-speed USB device number 5 using exynos-ehci Jun 30 07:09:54.609699 [ 17.541765] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 07:09:54.621783 [ 17.549377] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 07:09:54.633755 [ 18.333838] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:005:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 07:09:55.425766 [ 18.348208] Asix Electronics AX88772A usb-001:005:10: attached PHY driver (mii_bus:phy_addr=usb-001:005:10, irq=POLL) Jun 30 07:09:55.437767 [ 18.358084] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, aa:5b:ab:89:e8:ab Jun 30 07:09:55.449720 [ 18.463760] asix 1-3.2.4:1.0 enxaa5bab89e8ab: renamed from eth0 Jun 30 07:09:55.545712 done. Jun 30 07:09:55.629680 [ 18.961255] EXT4-fs (dm-0): re-mounted 9a2c23c3-c633-42fb-a651-f46dd527031e r/w. Quota mode: disabled. Jun 30 07:09:56.049724 Checking file systems.../dev/sda1: clean, 2179/61056 files, 44464/243968 blocks Jun 30 07:09:57.573741 done. Jun 30 07:09:57.597694 Cleaning up temporary files... /tmp. Jun 30 07:09:57.837724 [ 20.962429] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 30 07:09:58.041774 [ 21.014332] EXT4-fs (sda1): mounted filesystem 1c45002d-81bb-4520-b056-4d2250d49dd1 r/w with ordered data mode. Quota mode: disabled. Jun 30 07:09:58.101722 [ 21.114710] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k Jun 30 07:09:58.197744 Mounting local filesystems...done. Jun 30 07:09:58.461713 Activating swapfile swap, if any...done. Jun 30 07:09:58.473700 Cleaning up temporary files.... Jun 30 07:09:58.509698 Starting Setting kernel variables: sysctl. Jun 30 07:09:58.665725 Configuring network interfaces...RTNETLINK answers: Operation not supported Jun 30 07:09:59.409720 done. Jun 30 07:09:59.409773 Cleaning up temporary files.... Jun 30 07:09:59.493712 Starting nftables: nonemnl.c:60: Unable to initialize Netlink socket: Protocol not supported Jun 30 07:09:59.769742 failed! Jun 30 07:09:59.769795 Setting up X socket directories... /tmp/.X11-unix Jun 30 07:09:59.769843 /tmp/.ICE-unix Jun 30 07:09:59.841717 . Jun 30 07:09:59.841770 startpar: service(s) returned failure: nftables ... failed! Jun 30 07:09:59.853695 INIT: Entering runlevel: 2 Jun 30 07:09:59.865676 Using makefile-style concurrent boot in runlevel 2. Jun 30 07:09:59.889716 Starting Apache httpd web server: apache2[ 27.533890] platform sound: deferred probe pending: arndale-audio: snd_soc_register_card() failed Jun 30 07:10:04.621754 AH00557: apache2: apr_sockaddr_info_get() failed for arndale-metrocentre Jun 30 07:10:25.653871 AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1. Set the 'ServerName' directive globally to suppress this message Jun 30 07:10:25.665821 . Jun 30 07:10:38.789606 Starting SMP IRQ Balancer: irqbalance. Jun 30 07:10:39.269610 Starting NTP server: ntpd2024-06-30T07:10:40 ntpd[1111]: INIT: ntpd ntpsec-1.2.2: Starting Jun 30 07:10:39.317604 2024-06-30T07:10:40 ntpd[1111]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 30 07:10:39.329706 . Jun 30 07:10:39.329776 Starting system message bus: dbus. Jun 30 07:10:39.713871 Starting OpenBSD Secure Shell server: sshd. Jun 30 07:10:40.488809 Starting /usr/local/sbin/xenstored... Jun 30 07:10:42.513930 Setting domain 0 name, domid and JSON config... Jun 30 07:10:42.525790 Done setting up Dom0 Jun 30 07:10:42.525847 Starting xenconsoled... Jun 30 07:10:42.525890 Starting QEMU as disk backend for dom0 Jun 30 07:10:42.525935 Jun 30 07:10:43.617838 Debian GNU/Linux 12 arndale-metrocentre hvc0 Jun 30 07:10:43.617923 Jun 30 07:10:43.617963 arndale-metrocentre login: INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 07:12:22.653766 Jun 30 07:16:12.579122 (XEN) *** Serial input to Xen (type 'CTRL-x' three times to switch input) Jun 30 07:16:12.604726 Jun 30 07:16:12.606058 Jun 30 07:16:13.579027 (XEN) '0' pressed -> dumping Dom0's registers Jun 30 07:16:13.604753 (XEN) *** Dumping Dom0 vcpu#0 state: *** Jun 30 07:16:13.604753 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Jun 30 07:16:13.607081 Not tainted ]---- Jun 30 07:16:13.616597 (XEN) CPU: 0 Jun 30 07:16:13.616597 (XEN) PC: c031be28 Jun 30 07:16:13.616597 (XEN) CPSR: 60070093 MODE:32-bit Guest SVC Jun 30 07:16:13.616597 (XEN) R0: 00000005 R1: 00000000 R2: 00031211 R3: c031be20 Jun 30 07:16:13.628722 (XEN) R4: c1b09d40 R5: c1d26f50 R6: c1b04e5c R7: c1b04e98 Jun 30 07:16:13.628788 (XEN) R8: 00000000 R9: 00000000 R10:000000ad R11:00000000 R12:c1d264a0 Jun 30 07:16:13.639011 (XEN) USR: SP: beb0b6c0 LR: b6ee3685 Jun 30 07:16:13.639069 (XEN) SVC: SP: c1b01f78 LR: c114e078 SPSR:60070013 Jun 30 07:16:13.652645 (XEN) ABT: SP: c1d38b10 LR: c0300ec0 SPSR:60030193 Jun 30 07:16:13.652793 (XEN) UND: SP: c1d38b20 LR: c0300fc0 SPSR:60070093 Jun 30 07:16:13.652830 (XEN) IRQ: SP: c1d38b00 LR: c0300bc0 SPSR:60070193 Jun 30 07:16:13.664598 (XEN) FIQ: SP: c1d38b30 LR: c1d38b30 SPSR:00000000 Jun 30 07:16:13.664598 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Jun 30 07:16:13.664598 (XEN) Jun 30 07:16:13.676613 (XEN) SCTLR: 10c5387d Jun 30 07:16:13.676613 (XEN) TCR: 00000000 Jun 30 07:16:13.676613 (XEN) TTBR0: 0000000065ed006a Jun 30 07:16:13.676613 (XEN) TTBR1: 000000006020406a Jun 30 07:16:13.676613 (XEN) IFAR: b6eb3c34, IFSR: 00000007 Jun 30 07:16:13.688594 (XEN) DFAR: b6f44abc, DFSR: 0000081f Jun 30 07:16:13.688594 (XEN) Jun 30 07:16:13.688594 (XEN) VTCR_EL2: 80003558 Jun 30 07:16:13.688594 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 07:16:13.700595 (XEN) Jun 30 07:16:13.700595 (XEN) SCTLR_EL2: 30cd187f Jun 30 07:16:13.700595 (XEN) HCR_EL2: 007c663f Jun 30 07:16:13.700595 (XEN) TTBR0_EL2: 0000000041107000 Jun 30 07:16:13.700595 (XEN) Jun 30 07:16:13.700595 (XEN) ESR_EL2: 07e00000 Jun 30 07:16:13.712594 (XEN) HPFAR_EL2: 00104810 Jun 30 07:16:13.712594 (XEN) HDFAR: e0807f00 Jun 30 07:16:13.712594 (XEN) HIFAR: c0d9e04c Jun 30 07:16:13.712594 (XEN) Jun 30 07:16:13.712594 (XEN) Guest stack trace from sp=c1b01f78: Jun 30 07:16:13.724592 (XEN) Failed to convert stack to physical address Jun 30 07:16:13.724592 (XEN) *** Dumping Dom0 vcpu#1 state: *** Jun 30 07:16:13.724592 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Not tainted ]---- Jun 30 07:16:13.736591 (XEN) CPU: 0 Jun 30 07:16:13.736591 (XEN) PC: c031be28 Jun 30 07:16:13.736591 (XEN) CPSR: 60070093 MODE:32-bit Guest SVC Jun 30 07:16:13.736591 (XEN) R0: 00000005 R1: 00000000 R2: 00010f01 R3: c031be20 Jun 30 07:16:13.748593 (XEN) R4: c2110880 R5: c1d26f50 R6: c1b04e5c R7: c1b04e98 Jun 30 07:16:13.748593 (XEN) R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:c1d264a0 Jun 30 07:16:13.760598 (XEN) USR: SP: be870960 LR: b6e34685 Jun 30 07:16:13.760598 (XEN) SVC: SP: e08d9fa0 LR: c114e078 SPSR:60070013 Jun 30 07:16:13.760598 (XEN) ABT: SP: c1d38b50 LR: c0300ec0 SPSR:60030193 Jun 30 07:16:13.772601 (XEN) UND: SP: c1d38b60 LR: c0300fc0 SPSR:600e0093 Jun 30 07:16:13.772601 (XEN) IRQ: SP: c1d38b40 LR: c0300bc0 SPSR:60070193 Jun 30 07:16:13.784598 (XEN) FIQ: SP: c1d38b70 LR: c1d38b70 SPSR:00000000 Jun 30 07:16:13.784598 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Jun 30 07:16:13.796618 (XEN) Jun 30 07:16:13.796618 (XEN) SCTLR: 10c5387d Jun 30 07:16:13.796618 (XEN) TCR: 00000000 Jun 30 07:16:13.796618 (XEN) TTBR0: 000000006465006a Jun 30 07:16:13.796618 (XEN) TTBR1: 000000006020406a Jun 30 07:16:13.808603 (XEN) IFAR: b6eef858, IFSR: 00000007 Jun 30 07:16:13.808603 (XEN) DFAR: 00435ffc, DFSR: 00000817 Jun 30 07:16:13.808603 (XEN) Jun 30 07:16:13.808603 (XEN) VTCR_EL2: 80003558 Jun 30 07:16:13.808603 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 07:16:13.820617 (XEN) Jun 30 07:16:13.820617 (XEN) SCTLR_EL2: 30cd187f Jun 30 07:16:13.820617 (XEN) HCR_EL2: 007c663f Jun 30 07:16:13.820617 (XEN) TTBR0_EL2: 0000000041107000 Jun 30 07:16:13.820617 (XEN) Jun 30 07:16:13.820617 (XEN) ESR_EL2: 07e00000 Jun 30 07:16:13.832593 (XEN) HPFAR_EL2: 00104810 Jun 30 07:16:13.832593 (XEN) HDFAR: e0807f00 Jun 30 07:16:13.832593 (XEN) HIFAR: c0d9e04c Jun 30 07:16:13.832593 (XEN) Jun 30 07:16:13.832593 (XEN) Guest stack trace from sp=e08d9fa0: Jun 30 07:16:13.844561 (XEN) Failed to convert stack to physical address Jun 30 07:16:13.844561 Jun 30 07:16:15.561112 (XEN) 'H' pressed -> dumping heap info (now = 403884503625) Jun 30 07:16:15.585812 (XEN) heap[node=0][zone=0] -> 16284 pages Jun 30 07:16:15.585871 (XEN) heap[node=0][zone=1] -> 0 Jun 30 07:16:15.587859 pages Jun 30 07:16:15.597628 (XEN) heap[node=0][zone=2] -> 0 pages Jun 30 07:16:15.597658 (XEN) heap[node=0][zone=3] -> 0 pages Jun 30 07:16:15.597682 (XEN) heap[node=0][zone=4] -> 0 pages Jun 30 07:16:15.597705 (XEN) heap[node=0][zone=5] -> 0 pages Jun 30 07:16:15.609706 (XEN) heap[node=0][zone=6] -> 0 pages Jun 30 07:16:15.609751 (XEN) heap[node=0][zone=7] -> 0 pages Jun 30 07:16:15.609751 (XEN) heap[node=0][zone=8] -> 0 pages Jun 30 07:16:15.621647 (XEN) heap[node=0][zone=9] -> 0 pages Jun 30 07:16:15.621647 (XEN) heap[node=0][zone=10] -> 0 pages Jun 30 07:16:15.621685 (XEN) heap[node=0][zone=11] -> 0 pages Jun 30 07:16:15.621728 (XEN) heap[node=0][zone=12] -> 0 pages Jun 30 07:16:15.633745 (XEN) heap[node=0][zone=13] -> 0 pages Jun 30 07:16:15.633802 (XEN) heap[node=0][zone=14] -> 0 pages Jun 30 07:16:15.633847 (XEN) heap[node=0][zone=15] -> 0 pages Jun 30 07:16:15.645743 (XEN) heap[node=0][zone=16] -> 0 pages Jun 30 07:16:15.645801 (XEN) heap[node=0][zone=17] -> 0 pages Jun 30 07:16:15.645846 (XEN) heap[node=0][zone=18] -> 0 pages Jun 30 07:16:15.645888 (XEN) heap[node=0][zone=19] -> 130833 pages Jun 30 07:16:15.657751 (XEN) heap[node=0][zone=20] -> 241626 pages Jun 30 07:16:15.657810 (XEN) heap[node=0][zone=21] -> 0 pages Jun 30 07:16:15.657854 (XEN) heap[node=0][zone=22] -> 0 pages Jun 30 07:16:15.669748 (XEN) heap[node=0][zone=23] -> 0 pages Jun 30 07:16:15.669805 (XEN) heap[node=0][zone=24] -> 0 pages Jun 30 07:16:15.669850 (XEN) heap[node=0][zone=25] -> 0 pages Jun 30 07:16:15.681726 (XEN) heap[node=0][zone=26] -> 0 pages Jun 30 07:16:15.681785 (XEN) heap[node=0][zone=27] -> 0 pages Jun 30 07:16:15.681831 (XEN) heap[node=0][zone=28] -> 0 pages Jun 30 07:16:15.681874 Jun 30 07:16:17.586218 Jun 30 07:16:19.344004 Jun 30 07:16:19.553593 Jun 30 07:16:21.350918 Jun 30 07:16:21.560754 (XEN) Dumping timer queues: Jun 30 07:16:21.581796 (XEN) CPU00: Jun 30 07:16:21.581796 (XEN) ex= 17227us timer=43fdc968 cb=vtimer.c#virt_timer_expired(43fdc960) Jun 30 07:16:21.581796 (XEN) CPU01: Jun 30 07:16:21.581828 (XEN) ex= 74522us timer=43fef968 c Jun 30 07:16:21.584848 b=vtimer.c#virt_timer_expired(43fef960) Jun 30 07:16:21.593585 Jun 30 07:16:23.583109 Jun 30 07:16:25.360458 Jun 30 07:16:25.587798 (XEN) 'd' pressed -> dumping registers Jun 30 07:16:25.613793 (XEN) Jun 30 07:16:25.613846 (XEN) *** Dumping CPU0 host state: *** Jun 30 07:16:25.613891 (XEN) ----[ Xen-4.19-unstable arm32 debug=y N Jun 30 07:16:25.616167 ot tainted ]---- Jun 30 07:16:25.625738 (XEN) CPU: 0 Jun 30 07:16:25.625792 (XEN) PC: 0025ef7c domain.c#idle_loop+0x130/0x1ac Jun 30 07:16:25.625840 (XEN) CPSR: 6007005a MODE:Hypervisor Jun 30 07:16:25.625884 (XEN) R0: 00000000 R1: 0029f300 R2: 00000000 R3: 00000000 Jun 30 07:16:25.637801 (XEN) R4: 00000000 R5: 002f80e0 R6: 0032b324 R7: 00000001 Jun 30 07:16:25.637862 (XEN) R8: 0032b104 R9: 00000000 R10:40e00000 R11:4003ff54 R12:fffffffc Jun 30 07:16:25.649750 (XEN) HYP: SP: 4003ff44 LR: 00225cb8 Jun 30 07:16:25.649808 (XEN) Jun 30 07:16:25.649848 (XEN) VTCR_EL2: 80003558 Jun 30 07:16:25.649890 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 07:16:25.661688 (XEN) Jun 30 07:16:25.661716 (XEN) SCTLR_EL2: 30cd187f Jun 30 07:16:25.661740 (XEN) HCR_EL2: 007c663f Jun 30 07:16:25.661763 (XEN) TTBR0_EL2: 0000000041107000 Jun 30 07:16:25.661785 (XEN) Jun 30 07:16:25.661806 (XEN) ESR_EL2: 07e00000 Jun 30 07:16:25.673673 (XEN) HPFAR_EL2: 00104810 Jun 30 07:16:25.673673 (XEN) HDFAR: e0807f00 Jun 30 07:16:25.673712 (XEN) HIFAR: c0d9e04c Jun 30 07:16:25.673753 (XEN) Jun 30 07:16:25.673790 (XEN) Xen stack trace from sp=4003ff44: Jun 30 07:16:25.685750 (XEN) 07e00000 00295014 002919ac 4003ff4c 00267818 00000000 00000000 00000000 Jun 30 07:16:25.685813 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 07:16:25.697756 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 07:16:25.697818 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 07:16:25.709744 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 07:16:25.721814 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 07:16:25.721875 (XEN) Xen call trace: Jun 30 07:16:25.721918 (XEN) [<0025ef7c>] domain.c#idle_loop+0x130/0x1ac (PC) Jun 30 07:16:25.733752 (XEN) [<00225cb8>] rcu_needs_cpu+0x40/0x60 (LR) Jun 30 07:16:25.733811 (XEN) [<00267818>] arch_get_xen_caps+0/0x90 Jun 30 07:16:25.733858 (XEN) Jun 30 07:16:25.745730 (XEN) *** Dumping CPU1 host state: *** Jun 30 07:16:25.745788 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Not tainted ]---- Jun 30 07:16:25.745838 (XEN) CPU: 1 Jun 30 07:16:25.745877 (XEN) PC: 0025ef7c domain.c#idle_loop+0x130/0x1ac Jun 30 07:16:25.757759 (XEN) CPSR: 6007005a MODE:Hypervisor Jun 30 07:16:25.757817 (XEN) R0: 00000000 R1: 0029f300 R2: 3fd0e000 R3: 00000000 Jun 30 07:16:25.769736 (XEN) R4: 00000001 R5: 002f80e0 R6: 0032b324 R7: 00000002 Jun 30 07:16:25.769796 (XEN) R8: 0032b104 R9: 00000001 R10:40e00000 R11:4000ff54 R12:fffffffc Jun 30 07:16:25.781747 (XEN) HYP: SP: 4000ff44 LR: 00225cb8 Jun 30 07:16:25.781804 (XEN) Jun 30 07:16:25.781843 (XEN) VTCR_EL2: 80003558 Jun 30 07:16:25.781884 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 07:16:25.781927 (XEN) Jun 30 07:16:25.781964 (XEN) SCTLR_EL2: 30cd187f Jun 30 07:16:25.793749 (XEN) HCR_EL2: 007c663f Jun 30 07:16:25.793804 (XEN) TTBR0_EL2: 00000000ba004000 Jun 30 07:16:25.793848 (XEN) Jun 30 07:16:25.793886 (XEN) ESR_EL2: 07e00000 Jun 30 07:16:25.793927 (XEN) HPFAR_EL2: 00104810 Jun 30 07:16:25.805745 (XEN) HDFAR: e0807f00 Jun 30 07:16:25.805801 (XEN) HIFAR: c0ac9320 Jun 30 07:16:25.805843 (XEN) Jun 30 07:16:25.805881 (XEN) Xen stack trace from sp=4000ff44: Jun 30 07:16:25.805925 (XEN) 07e00000 002f9290 00000001 4000ff3c 002680f4 00000000 00000000 00000000 Jun 30 07:16:25.817762 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 07:16:25.829732 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 07:16:25.829795 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 07:16:25.841738 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 07:16:25.841799 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 07:16:25.853753 (XEN) Xen call trace: Jun 30 07:16:25.853829 (XEN) [<0025ef7c>] domain.c#idle_loop+0x130/0x1ac (PC) Jun 30 07:16:25.853882 (XEN) [<00225cb8>] rcu_needs_cpu+0x40/0x60 (LR) Jun 30 07:16:25.865741 (XEN) [<002680f4>] start_secondary+0x204/0x20c Jun 30 07:16:25.865800 (XEN) Jun 30 07:16:25.865840 Jun 30 07:16:27.577548 (XEN) 'e' pressed -> dumping event-channel info Jun 30 07:16:27.601767 (XEN) Event channel information for domain 0: Jun 30 07:16:27.601800 (XEN) Polling vCPUs: {} Jun 30 07:16:27.601824 (XEN) port Jun 30 07:16:27.603172 [p/m/s] Jun 30 07:16:27.613721 (XEN) 1 [0/0/ - ]: s=3 n=1 x=0 d=0 p=4 Jun 30 07:16:27.613778 (XEN) 2 [0/0/ - ]: s=5 n=0 x=0 v=2 Jun 30 07:16:27.613825 (XEN) 3 [0/0/ - ]: s=5 n=1 x=0 v=3 Jun 30 07:16:27.625706 (XEN) 4 [0/0/ - ]: s=3 n=0 x=0 d=0 p=1 Jun 30 07:16:27.625766 Jun 30 07:16:29.573452 (XEN) gnttab_usage_print_all [ key 'g' pressed Jun 30 07:16:29.597692 (XEN) -------- active -------- -------- shared -------- Jun 30 07:16:29.597728 (XEN) [ref] localdom mfn pin localdom gmfn flag Jun 30 07:16:29.599389 s Jun 30 07:16:29.609737 (XEN) grant-table for remote d0 (v1) Jun 30 07:16:29.609795 (XEN) 1 frames (64 max), 0 maptrack frames (1024 max) Jun 30 07:16:29.609844 (XEN) no active grant table entries Jun 30 07:16:29.609921 (XEN) gnttab_usage_print_all ] done Jun 30 07:16:29.621653 Jun 30 07:16:31.582463 Jun 30 07:16:33.376670 Jun 30 07:16:33.589657 (XEN) Physical memory information: Jun 30 07:16:33.613869 (XEN) Xen heap: 65136kB free Jun 30 07:16:33.613937 (XEN) heap[19]: 523332kB free Jun 30 07:16:33.613983 (XEN) heap[20]: 966504kB fr Jun 30 07:16:33.615360 ee Jun 30 07:16:33.625676 (XEN) Dom heap: 1489836kB free Jun 30 07:16:33.625733 Jun 30 07:16:35.585668 Jun 30 07:16:37.382918 Jun 30 07:16:37.590735 (XEN) sched_smt_power_savings: disabled Jun 30 07:16:37.609722 (XEN) NOW=425911666791 Jun 30 07:16:37.609754 (XEN) Online Cpus: 0-1 Jun 30 07:16:37.609777 (XEN) Cpupool 0: Jun 30 07:16:37.609799 (XEN) Cpus: 0-1 Jun 30 07:16:37.609821 (XEN) Schedu Jun 30 07:16:37.611020 ling granularity: cpu, 1 CPU per sched-resource Jun 30 07:16:37.621686 (XEN) Scheduler: SMP Credit Scheduler rev2 (credit2) Jun 30 07:16:37.621717 (XEN) Active queues: 1 Jun 30 07:16:37.621741 (XEN) default-weight = 256 Jun 30 07:16:37.633767 (XEN) Runqueue 0: Jun 30 07:16:37.633797 (XEN) ncpus = 2 Jun 30 07:16:37.633821 (XEN) cpus = 0-1 Jun 30 07:16:37.633844 (XEN) max_weight = 256 Jun 30 07:16:37.633868 (XEN) pick_bias = 0 Jun 30 07:16:37.645683 (XEN) instload = 0 Jun 30 07:16:37.645714 (XEN) aveload = 559 (~0%) Jun 30 07:16:37.645739 (XEN) idlers: 2 Jun 30 07:16:37.645761 (XEN) tickled: 0 Jun 30 07:16:37.645783 (XEN) fully idle cores: 2 Jun 30 07:16:37.657731 (XEN) Domain info: Jun 30 07:16:37.657761 (XEN) Domain: 0 w 256 c 0 v 2 Jun 30 07:16:37.657785 (XEN) 1: [0.0] flags=0 cpu=1 credit=6436934 [w=256] load=360 (~0%) Jun 30 07:16:37.669718 (XEN) 2: [0.1] flags=0 cpu=0 credit=7028990 [w=256] load=207 (~0%) Jun 30 07:16:37.669754 (XEN) Runqueue 0: Jun 30 07:16:37.669777 (XEN) CPU[00] runq=0, sibling={0}, core={0-1} Jun 30 07:16:37.681779 (XEN) CPU[01] runq=0, sibling={1}, core={0-1} Jun 30 07:16:37.681812 (XEN) run: [0.0] flags=2 cpu=1 credit=6436934 [w=256] load=338 (~0%) Jun 30 07:16:37.681841 (XEN) RUNQ: Jun 30 07:16:37.693705 (XEN) CPUs info: Jun 30 07:16:37.693735 (XEN) CPU[00] current=d[IDLE]v0, curr=d[IDLE]v0, prev=NULL Jun 30 07:16:37.693780 (XEN) CPU[01] current=d0v1, curr=d0v1, prev=NULL Jun 30 07:16:37.693806 Jun 30 07:16:39.590387 Jun 30 07:16:41.393860 Jun 30 07:16:41.641752 (XEN) Synced stime skew: max=125ns avg=125ns samples=1 current=125ns Jun 30 07:16:41.665690 (XEN) Synced cycles skew: max=1 avg=1 samples=1 current=1 Jun 30 07:16:41.665706 Jun 30 07:16:41.666873 Jun 30 07:16:43.634255 Jun 30 07:16:45.438998 Jun 30 07:16:45.651755 Jun 30 07:16:47.445908 Jun 30 07:16:47.651504 Jun 30 07:16:49.451597 Jun 30 07:16:59.708506 (XEN) 'q' pressed -> dumping domain info (now = 448024943041) Jun 30 07:16:59.725763 (XEN) General information for domain 0: Jun 30 07:16:59.725824 (XEN) refcnt=3 dying=0 pause Jun 30 07:16:59.727868 _count=0 Jun 30 07:16:59.737704 (XEN) nr_pages=131072 xenheap_pages=2 dirty_cpus={} max_pages=131072 Jun 30 07:16:59.737767 (XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=00000020 Jun 30 07:16:59.749776 (XEN) p2m mappings for domain 0 (vmid 1): Jun 30 07:16:59.749836 (XEN) 1G mappings: 0 (shattered 0) Jun 30 07:16:59.749882 (XEN) 2M mappings: 255 (shattered 1) Jun 30 07:16:59.761733 (XEN) 4K mappings: 944 Jun 30 07:16:59.761790 (XEN) Rangesets belonging to domain 0: Jun 30 07:16:59.761836 (XEN) Interrupts { 32-72, 74, 77-79, 82-84, 86, 88-100, 103-104, 107-110, 114, 116-120, 123, 126-128, 138, 144, 146-147, 149-151, 156 } Jun 30 07:16:59.773758 (XEN) I/O Memory { 2020-2050, 3810-3811, 3830-3831, 3860-3861, 10000-10001, 10010-10045, 10050-10055, 10060-10061, 101b0-101b1, 101d0-101d1, 101e0-101e1, 10440-10441, 10800-10801, 10830-10831, 10850-10851, 10a60-10a61, 10d10-10d11, 11000-11010, 11200-11201, 11210-11211, 11400-11401, 11800-11805, 11c00-11c01, 11c10-11c11, 11d40-11d41, 11f20-11f21, 12000-12010, 12100-12101, 12110-12111, 12120-12121, 12130-12131, 12170-12171, 121a0-121a1, 121b0-121b1, 121d0-121d1, 12200-12201, 12210-12211, 12220-12221, 12230-12231, 12250-12251, 122f0-122f1, 12c00-12c01, 12c10-12c11, 12c30-12c31, 12c60-12c61, 12c70-12c71, 12c80-12c81, 12c90-12c91, 12ca0-12ca1, 12cb0-12cb1, 12cc0-12cc1, 12cd0-12cd1, 12ce0-12ce1, 12d10-12d11, 12d20-12d21, 12d30-12d31, 12d40-12d41, 12d60-12d61, 12d70-12d71, 12dd0-12dd1, 13260-13261, 13270-13271, 13280-13281, 13290-13291, 132a0-132a1, 132b0-132b1, 132c0-132c1, 132d0-132d1, 132e0-132e1, 132f0-132f1, 13400-13401, 13c40-13c41, 13c50-13c51, 13e00-13e01, 13e10-13e11, 13e20-13e21, 13e30-13e31, 13e80-13e81, 13e90-13e91, 13ea0-13ea1, 13eb0-13eb1, 14400-14440, 14450-14460, 14500-14510, 14530-145a0, 145b0-145b1, 14640-14641, 14650-14651 } Jun 30 07:16:59.869781 (XEN) NODE affinity for domain 0: [0] Jun 30 07:16:59.881740 (XEN) VCPU information and callbacks for domain 0: Jun 30 07:16:59.881801 (XEN) UNIT0 affinities: hard={0-1} soft={0-1} Jun 30 07:16:59.881849 (XEN) VCPU0: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Jun 30 07:16:59.893758 (XEN) pause_count=0 pause_flags=1 Jun 30 07:16:59.893816 (XEN) GICH_LRs (vcpu 0) mask=0 Jun 30 07:16:59.893861 (XEN) VCPU_LR[0]=0 Jun 30 07:16:59.905740 (XEN) VCPU_LR[1]=0 Jun 30 07:16:59.905795 (XEN) VCPU_LR[2]=0 Jun 30 07:16:59.905838 (XEN) VCPU_LR[3]=0 Jun 30 07:16:59.905878 (XEN) No periodic timer Jun 30 07:16:59.905920 (XEN) UNIT1 affinities: hard={0-1} soft={0-1} Jun 30 07:16:59.917754 (XEN) VCPU1: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Jun 30 07:16:59.917818 (XEN) pause_count=0 pause_flags=1 Jun 30 07:16:59.917890 (XEN) GICH_LRs (vcpu 1) mask=0 Jun 30 07:16:59.929749 (XEN) VCPU_LR[0]=0 Jun 30 07:16:59.929804 (XEN) VCPU_LR[1]=0 Jun 30 07:16:59.929845 (XEN) VCPU_LR[2]=0 Jun 30 07:16:59.929885 (XEN) VCPU_LR[3]=0 Jun 30 07:16:59.929924 (XEN) No periodic timer Jun 30 07:16:59.929964 (XEN) Notifying guest 0:0 (virq 1, port 0) Jun 30 07:16:59.941721 (XEN) Notifying guest 0:1 (virq 1, port 0) Jun 30 07:16:59.941779 Jun 30 07:17:11.703863 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 30 07:17:11.729782 Jun 30 07:17:11.729835 arndale-metrocentre login: Jun 30 07:17:11.731682 Jun 30 07:19:01.577678 Jun 30 07:19:01.577794 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 07:19:01.589779 Jun 30 07:19:01.589832 CPU: Exynos5250@1000MHz Jun 30 07:19:01.589876 Jun 30 07:19:01.589914 Board: Arndale Jun 30 07:19:01.589955 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 07:19:01.601713 ready Jun 30 07:19:01.601766 DRAM: 2 GiB Jun 30 07:19:01.601808 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 07:19:01.613733 trace: enabled Jun 30 07:19:01.649700 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 07:19:02.009702 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 07:19:02.069736 In: serial Jun 30 07:19:02.069791 Out: serial Jun 30 07:19:02.069832 Err: serial Jun 30 07:19:02.081782 SCSI: ARNDALE SCSI INIT Jun 30 07:19:02.081842 Target spinup took 0 ms. Jun 30 07:19:02.081887 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 07:19:02.093748 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 07:19:02.093811 Net: Net Initialization Skipped Jun 30 07:19:02.093856 No ethernet found. Jun 30 07:19:02.093897 Hostname: arndale-metrocentre Jun 30 07:19:02.105722 Hit any key to stop autoboot: 2  1  0 Jun 30 07:19:04.025749 (Re)start USB... Jun 30 07:19:04.025822 USB0: USB EHCI 1.00 Jun 30 07:19:04.025865 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 07:19:09.633779 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 07:19:09.633864 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 07:19:10.077722 Waiting for Ethernet connection... done. Jun 30 07:19:11.817709 BOOTP broadcast 1 Jun 30 07:19:11.829699 BOOTP broadcast 2 Jun 30 07:19:13.941710 DHCP client bound to address 10.149.64.44 (2212 ms) Jun 30 07:19:13.953748 Using asx0 device Jun 30 07:19:13.953803 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 07:19:13.953852 Filename 'pxelinux.0'. Jun 30 07:19:13.953894 Load address: 0x43e00000 Jun 30 07:19:13.965656 Loading: *### Jun 30 07:19:13.977710 2.5 MiB/s Jun 30 07:19:13.977765 done Jun 30 07:19:13.977805 Bytes transferred = 42430 (a5be hex) Jun 30 07:19:13.977849 missing environment variable: pxeuuid Jun 30 07:19:13.989727 Retrieving file: pxelinux.cfg/0A95402C Jun 30 07:19:13.989787 Using asx0 device Jun 30 07:19:13.989830 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 07:19:14.001670 Filename 'pxelinux.cfg/0A95402C'. Jun 30 07:19:14.001702 Load address: 0x51000000 Jun 30 07:19:14.001726 Loading: *# Jun 30 07:19:14.001748 31.3 KiB/s Jun 30 07:19:14.001770 done Jun 30 07:19:14.001791 Bytes transferred = 65 (41 hex) Jun 30 07:19:14.001814 Config file found Jun 30 07:19:14.013625 Ignoring unknown command: serial Jun 30 07:19:14.013657 1: local Jun 30 07:19:14.013679 scanning bus for devices... Jun 30 07:19:14.013702 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 07:19:14.049752 Type: Hard Disk Jun 30 07:19:14.049809 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 07:19:14.061758 Found 1 device(s). Jun 30 07:19:14.061813 Jun 30 07:19:14.061853 SCSI device 0: Jun 30 07:19:14.061894 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 07:19:14.061979 Type: Hard Disk Jun 30 07:19:14.073658 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 07:19:14.073692 ... is now current device Jun 30 07:19:14.073715 Scanning scsi 0... Jun 30 07:19:14.073737 Found U-Boot script /boot.scr Jun 30 07:19:14.253725 1768 bytes read in 46 ms (37.1 KiB/s) Jun 30 07:19:14.301704 ## Executing script at 50000000 Jun 30 07:19:14.313734 Loading dtbs/6.10.0-rc5+/exynos5250-arndale.dtb Jun 30 07:19:14.313793 46641 bytes read in 3101 ms (14.6 KiB/s) Jun 30 07:19:17.313767 983052 bytes read in 101 ms (9.3 MiB/s) Jun 30 07:19:17.433776 Loaded xen-4.19-unstable to 0x41000000 (f000c) Jun 30 07:19:17.433834 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan Jun 30 07:19:17.445730 10785280 bytes read in 504 ms (20.4 MiB/s) Jun 30 07:19:17.949685 Loaded vmlinuz-6.10.0-rc5+ to 0x42000000 (a49200) Jun 30 07:19:17.961792 command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 07:19:17.973786 12142194 bytes read in 519 ms (22.3 MiB/s) Jun 30 07:19:18.501780 Loaded initrd.img-6.10.0-rc5+ to 0x43300000 (b94672) Jun 30 07:19:18.501859 chosen { Jun 30 07:19:18.501899 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan"; Jun 30 07:19:18.513767 #size-cells = <0x00000001>; Jun 30 07:19:18.513797 #address-cells = <0x00000001>; Jun 30 07:19:18.525759 stdout-path = "serial2:115200n8"; Jun 30 07:19:18.525817 module@1 { Jun 30 07:19:18.525857 reg = <0x43300000 0x00b94672>; Jun 30 07:19:18.525899 compatible = "xen,linux-initrd", "xen,multiboot-module"; Jun 30 07:19:18.537769 }; Jun 30 07:19:18.537821 module@0 { Jun 30 07:19:18.537861 bootargs = "ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Jun 30 07:19:18.549791 reg = <0x42000000 0x00a49200>; Jun 30 07:19:18.549847 compatible = "xen,linux-zimage", "xen,multiboot-module"; Jun 30 07:19:18.561771 }; Jun 30 07:19:18.561823 }; Jun 30 07:19:18.561861 Booting 0x41000000 - 0x43000000 Jun 30 07:19:18.561903 Kernel image @ 0x41000000 [ 0x000000 - 0x12f000 ] Jun 30 07:19:18.573729 ## Flattened Device Tree blob at 43000000 Jun 30 07:19:18.573788 Booting using the fdt blob at 0x43000000 Jun 30 07:19:18.573834 reserving fdt memory region: addr=43000000 size=c000 Jun 30 07:19:18.585798 Loading Device Tree to 4fff1000, end 4fffffff ... OK Jun 30 07:19:18.585858 Jun 30 07:19:18.585896 Starting kernel ...(fake run for tracing) Jun 30 07:19:18.597711 Jun 30 07:19:18.597762 Jun 30 07:19:18.597800 Starting kernel ... Jun 30 07:19:18.597841 Jun 30 07:19:18.597879 __ __ _ _ _ ___ _ _ _ Jun 30 07:19:18.645773 \ \/ /___ _ __ | || | / |/ _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Jun 30 07:19:18.657751 \ // _ \ '_ \ | || |_ | | (_) |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Jun 30 07:19:18.657813 / \ __/ | | | |__ _|| |\__, |__| |_| | | | \__ \ || (_| | |_) | | __/ Jun 30 07:19:18.669770 /_/\_\___|_| |_| |_|(_)_| /_/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Jun 30 07:19:18.669833 Jun 30 07:19:18.681751 (XEN) Xen version 4.19-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Sun Jun 30 01:52:15 UTC 2024 Jun 30 07:19:18.681830 (XEN) Latest ChangeSet: Wed Jun 26 16:07:30 2024 +0100 git:08f9b1dd9c Jun 30 07:19:18.693776 (XEN) build-id: a1f1bc3a5986d3ec30239a56d95725b8f32801f2 Jun 30 07:19:18.693836 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Jun 30 07:19:18.705771 (XEN) 32-bit Execution: Jun 30 07:19:18.705827 (XEN) Processor Features: 00001031:00011011 Jun 30 07:19:18.705872 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Jun 30 07:19:18.717809 (XEN) Extensions: GenericTimer Security Jun 30 07:19:18.717868 (XEN) Debug Features: 02010555 Jun 30 07:19:18.729787 (XEN) Auxiliary Features: 00000000 Jun 30 07:19:18.729845 (XEN) Memory Model Features: 10201105 20000000 Jun 30 07:19:18.729892 (XEN) 01240000 02102211 Jun 30 07:19:18.741768 (XEN) ISA Features: 02101110 13112111 21232041 Jun 30 07:19:18.741828 (XEN) 11112131 10011142 00000000 Jun 30 07:19:18.741873 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Jun 30 07:19:18.753762 (XEN) Set SYSRAM to 0000000041000074 (00200074) Jun 30 07:19:18.753794 (XEN) SMP: Allowing 2 CPUs Jun 30 07:19:18.765763 (XEN) enabled workaround for: ARM erratum 766422 Jun 30 07:19:18.765823 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Jun 30 07:19:18.777801 (XEN) GICv2 initialization: Jun 30 07:19:18.777858 (XEN) gic_dist_addr=0000000010481000 Jun 30 07:19:18.777904 (XEN) gic_cpu_addr=0000000010482000 Jun 30 07:19:18.777947 (XEN) gic_hyp_addr=0000000010484000 Jun 30 07:19:18.789752 (XEN) gic_vcpu_addr=0000000010486000 Jun 30 07:19:18.789783 (XEN) gic_maintenance_irq=25 Jun 30 07:19:18.789808 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Jun 30 07:19:18.801761 (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2) Jun 30 07:19:18.801821 (XEN) Initializing Credit2 scheduler Jun 30 07:19:18.801865 (XEN) load_precision_shift: 18 Jun 30 07:19:18.813773 (XEN) load_window_shift: 30 Jun 30 07:19:18.813829 (XEN) underload_balance_tolerance: 0 Jun 30 07:19:18.813874 (XEN) overload_balance_tolerance: -3 Jun 30 07:19:18.813916 (XEN) runqueues arrangement: socket Jun 30 07:19:18.825757 (XEN) cap enforcement granularity: 10ms Jun 30 07:19:18.825816 (XEN) load tracking window length 1073741824 ns Jun 30 07:19:18.825862 (XEN) Allocated console ring of 16 KiB. Jun 30 07:19:18.837765 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Jun 30 07:19:18.837828 (XEN) CPU0: Guest atomics will try 1 times before pausing the domain Jun 30 07:19:18.849755 (XEN) Bringing up CPU1 Jun 30 07:19:18.849810 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Jun 30 07:19:18.849860 (XEN) Brought up 2 CPUs Jun 30 07:19:18.861763 (XEN) CPU 1 booted. Jun 30 07:19:18.861818 (XEN) I/O virtualisation disabled Jun 30 07:19:18.861862 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Jun 30 07:19:18.861908 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Jun 30 07:19:18.873764 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Jun 30 07:19:18.873825 (XEN) Initializing Credit2 scheduler Jun 30 07:19:18.873870 (XEN) load_precision_shift: 18 Jun 30 07:19:18.885760 (XEN) load_window_shift: 30 Jun 30 07:19:18.885815 (XEN) underload_balance_tolerance: 0 Jun 30 07:19:18.885859 (XEN) overload_balance_tolerance: -3 Jun 30 07:19:18.897760 (XEN) runqueues arrangement: socket Jun 30 07:19:18.897818 (XEN) cap enforcement granularity: 10ms Jun 30 07:19:18.897863 (XEN) load tracking window length 1073741824 ns Jun 30 07:19:18.897909 (XEN) Adding cpu 0 to runqueue 0 Jun 30 07:19:18.909763 (XEN) First cpu on runqueue, activating Jun 30 07:19:18.909821 (XEN) Adding cpu 1 to runqueue 0 Jun 30 07:19:18.909865 (XEN) alternatives: Patching with alt table 002c2f84 -> 002c305c Jun 30 07:19:18.921754 (XEN) CPU0 will execute ICIALLU on guest exit Jun 30 07:19:18.921813 (XEN) CPU1 will execute ICIALLU on guest exit Jun 30 07:19:18.921858 (XEN) *** LOADING DOMAIN 0 *** Jun 30 07:19:18.933773 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Jun 30 07:19:18.933835 (XEN) Loading ramdisk from boot module @ 0000000043300000 Jun 30 07:19:18.945745 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Jun 30 07:19:18.945806 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Jun 30 07:19:19.509757 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Jun 30 07:19:19.521726 (XEN) Allocating PPI 16 for event channel interrupt Jun 30 07:19:19.545761 (XEN) d0: extended regions not supported for 32-bit guests Jun 30 07:19:19.557735 (XEN) Loading zImage from 0000000042000000 to 0000000067400000-0000000067e49200 Jun 30 07:19:19.557799 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d94672 Jun 30 07:19:19.653763 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b499 Jun 30 07:19:19.761760 (XEN) Initial low memory virq threshold set at 0x4000 pages. Jun 30 07:19:19.761824 (XEN) Scrubbing Free RAM in background Jun 30 07:19:19.761869 (XEN) Std. Loglevel: All Jun 30 07:19:19.761911 (XEN) Guest Loglevel: All Jun 30 07:19:19.773757 (XEN) *************************************************** Jun 30 07:19:19.773815 (XEN) WARNING: SILO mode is not enabled. Jun 30 07:19:19.773861 (XEN) It has implications on the security of the system, Jun 30 07:19:19.785765 (XEN) unless the communications have been forbidden between Jun 30 07:19:19.785826 (XEN) untrusted domains. Jun 30 07:19:19.785868 (XEN) *************************************************** Jun 30 07:19:19.797720 (XEN) 3... 2... 1... Jun 30 07:19:22.800778 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 30 07:19:22.812664 (XEN) Freed 352kB init memory. Jun 30 07:19:22.812735 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 07:19:23.940577 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Jun 30 07:19:23.964633 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Jun 30 07:19:23.964633 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Jun 30 07:19:23.964633 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Jun 30 07:19:23.976795 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 07:19:23.976871 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 07:19:24.024625 [ 0.000000] Linux version 6.10.0-rc5+ (osstest@himrod0) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Sun Jun 30 01:19:39 UTC 2024 Jun 30 07:19:24.036624 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 30 07:19:24.048606 [ 0.000000] CPU: div instructions available: patching division code Jun 30 07:19:24.048606 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 07:19:24.060627 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 07:19:24.072630 [ 0.000000] Memory policy: Data cache writealloc Jun 30 07:19:24.072630 [ 0.000000] Xen 4.19 support found Jun 30 07:19:24.072630 [ 0.000000] efi: UEFI not found. Jun 30 07:19:24.072630 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 on node -1 Jun 30 07:19:24.084714 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 07:19:24.084779 [ 0.000000] Zone ranges: Jun 30 07:19:24.084824 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Jun 30 07:19:24.096720 [ 0.000000] Normal empty Jun 30 07:19:24.096720 [ 0.000000] HighMem empty Jun 30 07:19:24.096720 [ 0.000000] Movable zone start for each node Jun 30 07:19:24.108624 [ 0.000000] Early memory node ranges Jun 30 07:19:24.108624 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Jun 30 07:19:24.120633 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Jun 30 07:19:24.120633 [ 0.000000] psci: probing for conduit method from DT. Jun 30 07:19:24.132747 [ 0.000000] psci: PSCIv1.1 detected in firmware. Jun 30 07:19:24.132813 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Jun 30 07:19:24.144624 [ 0.000000] psci: Trusted OS migration not required Jun 30 07:19:24.144624 [ 0.000000] psci: SMC Calling Convention v1.2 Jun 30 07:19:24.144624 [ 0.000000] percpu: Embedded 18 pages/cpu s41428 r8192 d24108 u73728 Jun 30 07:19:24.156640 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 07:19:24.168627 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 07:19:24.180617 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Jun 30 07:19:24.192621 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 131072 Jun 30 07:19:24.192621 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Jun 30 07:19:24.204624 [ 0.000000] Memory: 414600K/524288K available (15360K kernel code, 2268K rwdata, 6084K rodata, 2048K init, 439K bss, 44152K reserved, 65536K cma-reserved, 0K highmem) Jun 30 07:19:24.216631 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 07:19:24.228625 [ 0.000000] trace event string verifier disabled Jun 30 07:19:24.228625 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 07:19:24.228625 [ 0.000000] rcu: RCU event tracing is enabled. Jun 30 07:19:24.240791 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Jun 30 07:19:24.240863 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Jun 30 07:19:24.252642 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 07:19:24.252642 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 07:19:24.264624 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 07:19:24.276627 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 07:19:24.276627 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Jun 30 07:19:24.288622 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 07:19:24.288622 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 07:19:24.300627 [ 0.000013] Switching to timer-based delay loop, resolution 41ns Jun 30 07:19:24.312625 [ 0.000514] Console: colour dummy device 80x30 Jun 30 07:19:24.312625 [ 0.000533] printk: legacy console [hvc0] enabled Jun 30 07:19:24.312625 [ 0.299529] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Jun 30 07:19:24.336643 [ 0.309927] CPU: Testing write buffer coherency: ok Jun 30 07:19:24.336643 [ 0.314870] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 07:19:24.336643 [ 0.324424] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 07:19:24.348620 [ 0.330836] pid_max: default: 32768 minimum: 301 Jun 30 07:19:24.348620 [ 0.335622] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 07:19:24.360632 [ 0.342904] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 07:19:24.372621 [ 0.351336] /cpus/cpu@0 missing clock-frequency property Jun 30 07:19:24.372621 [ 0.356106] /cpus/cpu@1 missing clock-frequency property Jun 30 07:19:24.384624 [ 0.361520] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 07:19:24.384624 [ 0.368220] xen:grant_table: Grant tables using version 1 layout Jun 30 07:19:24.396623 [ 0.373355] Grant table initialized Jun 30 07:19:24.396623 [ 0.376911] xen:events: Using FIFO-based ABI Jun 30 07:19:24.396623 [ 0.381210] Xen: initializing cpu0 Jun 30 07:19:24.408624 [ 0.384735] Setting up static identity map for 0x60300000 - 0x603000ac Jun 30 07:19:24.408624 [ 0.392525] rcu: Hierarchical SRCU implementation. Jun 30 07:19:24.408624 [ 0.396126] rcu: Max phase no-delay instances is 1000. Jun 30 07:19:24.420633 [ 0.404359] EFI services will not be available. Jun 30 07:19:24.420633 [ 0.407677] smp: Bringing up secondary CPUs ... Jun 30 07:19:24.432569 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 07:19:24.504640 [ 0.481979] Xen: initializing cpu1 Jun 30 07:19:24.504640 [ 0.482138] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 07:19:24.504640 [ 0.482161] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 07:19:24.516785 [ 0.501134] smp: Brought up 1 node, 2 CPUs Jun 30 07:19:24.528809 [ 0.504793] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 07:19:24.528874 [ 0.511080] CPU: All CPU(s) started in SVC mode. Jun 30 07:19:24.528921 [ 0.516986] devtmpfs: initialized Jun 30 07:19:24.540790 [ 0.529513] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 07:19:24.552839 [ 0.536064] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Jun 30 07:19:24.564814 [ 0.545734] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 07:19:24.576796 [ 0.553629] pinctrl core: initialized pinctrl subsystem Jun 30 07:19:24.576859 [ 0.560256] DMI not present or invalid. Jun 30 07:19:24.576904 [ 0.563767] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 07:19:24.588802 [ 0.570384] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 07:19:24.588867 [ 0.579701] thermal_sys: Registered thermal governor 'step_wise' Jun 30 07:19:24.600801 [ 0.579857] software IO TLB: area num 2. Jun 30 07:19:24.612786 [ 0.588529] software IO TLB: only able to allocate 8 MB Jun 30 07:19:24.612850 [ 0.595600] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Jun 30 07:19:24.624798 [ 0.600802] No ATAGs? Jun 30 07:19:24.624855 [ 0.603107] hw-breakpoint: Failed to enable monitor mode on CPU 0. Jun 30 07:19:24.624906 [ 0.611810] Serial: AMBA PL011 UART driver Jun 30 07:19:24.636749 [ 0.658425] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 65 Jun 30 07:19:24.684757 [ 0.686858] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 30 07:19:24.708799 [ 0.710838] xen:balloon: Initialising balloon driver Jun 30 07:19:24.732700 [ 0.717288] iommu: Default domain type: Translated Jun 30 07:19:24.744707 [ 0.720699] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 07:19:24.744772 [ 0.729482] SCSI subsystem initialized Jun 30 07:19:24.744818 [ 0.732243] usbcore: registered new interface driver usbfs Jun 30 07:19:24.756621 [ 0.737479] usbcore: registered new interface driver hub Jun 30 07:19:24.756621 [ 0.742818] usbcore: registered new device driver usb Jun 30 07:19:24.768684 [ 0.749537] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 07:19:24.768684 [ 0.753131] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 07:19:24.780654 [ 0.759387] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 07:19:24.780654 [ 0.764449] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 07:19:24.792627 [ 0.769383] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 07:19:24.792627 [ 0.775421] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 07:19:24.804619 [ 0.781197] pps_core: LinuxPPS API ver. 1 registered Jun 30 07:19:24.804619 [ 0.785590] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 07:19:24.816714 [ 0.794817] PTP clock support registered Jun 30 07:19:24.816778 [ 0.799052] EDAC MC: Ver: 3.0.0 Jun 30 07:19:24.816818 [ 0.802313] scmi_core: SCMI protocol bus registered Jun 30 07:19:24.828622 [ 0.808997] vgaarb: loaded Jun 30 07:19:24.828622 [ 0.812270] clocksource: Switched to clocksource arch_sys_counter Jun 30 07:19:24.840562 [ 0.829165] NET: Registered PF_INET protocol family Jun 30 07:19:24.852627 [ 0.832824] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Jun 30 07:19:24.852627 [ 0.840709] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 07:19:24.864628 [ 0.848427] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 07:19:24.876615 [ 0.856211] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Jun 30 07:19:24.876615 [ 0.864046] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Jun 30 07:19:24.888625 [ 0.871321] TCP: Hash tables configured (established 4096 bind 4096) Jun 30 07:19:24.900635 [ 0.877696] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 07:19:24.900635 [ 0.884264] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 07:19:24.912588 [ 0.891359] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 07:19:24.912588 [ 0.897527] RPC: Registered named UNIX socket transport module. Jun 30 07:19:24.924621 [ 0.902998] RPC: Registered udp transport module. Jun 30 07:19:24.924621 [ 0.907752] RPC: Registered tcp transport module. Jun 30 07:19:24.936618 [ 0.912548] RPC: Registered tcp-with-tls transport module. Jun 30 07:19:24.936618 [ 0.918102] RPC: Registered tcp NFSv4.1 backchannel transport module. Jun 30 07:19:24.948622 [ 0.924613] PCI: CLS 0 bytes, default 64 Jun 30 07:19:24.948622 [ 0.930013] Initialise system trusted keyrings Jun 30 07:19:24.948622 [ 0.933346] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Jun 30 07:19:24.960629 [ 0.939853] squashfs: version 4.0 (2009/01/31) Phillip Lougher Jun 30 07:19:24.960629 [ 0.945734] NFS: Registering the id_resolver key type Jun 30 07:19:24.972628 [ 0.950667] Key type id_resolver registered Jun 30 07:19:24.972628 [ 0.954900] Key type id_legacy registered Jun 30 07:19:24.972628 [ 0.959003] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Jun 30 07:19:24.984622 [ 0.965759] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Jun 30 07:19:24.996592 [ 0.973473] Trying to unpack rootfs image as initramfs... Jun 30 07:19:24.996592 [ 0.995103] Key type asymmetric registered Jun 30 07:19:25.020635 [ 0.997843] Asymmetric key parser 'x509' registered Jun 30 07:19:25.020635 [ 1.002905] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) Jun 30 07:19:25.032576 [ 1.010254] io scheduler mq-deadline registered Jun 30 07:19:25.032576 [ 1.014874] io scheduler kyber registered Jun 30 07:19:25.032576 [ 1.018990] io scheduler bfq registered Jun 30 07:19:25.044569 [ 1.150930] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 07:19:25.176622 [ 1.157175] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 07:19:25.188557 [ 1.199936] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 07:19:25.224625 [ 1.206206] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 07:19:25.236563 [ 1.255992] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 07:19:25.284620 [ 1.262200] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 07:19:25.284620 [ 1.294848] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 07:19:25.320627 [ 1.301061] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 07:19:25.332607 [ 1.313875] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 07:19:25.344709 [ 1.363911] xen:xen_evtchn: Event-channel device installed Jun 30 07:19:25.380592 [ 1.489407] Freeing initrd memory: 11860K Jun 30 07:19:25.504583 [ 1.493158] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 07:19:25.520624 [ 1.504763] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 07:19:25.532626 [ 1.512958] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 07:19:25.544623 [ 1.521833] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 07:19:25.544623 [ 1.530864] SuperH (H)SCI(F) driver initialized Jun 30 07:19:25.556622 [ 1.535200] STMicroelectronics ASC driver initialized Jun 30 07:19:25.556622 [ 1.540025] STM32 USART driver initialized Jun 30 07:19:25.556622 [ 1.545471] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 07:19:25.568608 [ 1.554144] random: crng init done Jun 30 07:19:25.568608 [ 1.561802] brd: module loaded Jun 30 07:19:25.580583 [ 1.567737] loop: module loaded Jun 30 07:19:25.592548 [ 1.583237] Invalid max_queues (4), will use default max: 2. Jun 30 07:19:25.604583 [ 1.601903] tun: Universal TUN/TAP device driver, 1.6 Jun 30 07:19:25.628609 [ 1.605778] CAN device driver interface Jun 30 07:19:25.628609 [ 1.610891] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Jun 30 07:19:25.628609 [ 1.622105] xen_netfront: Initialising Xen virtual ethernet driver Jun 30 07:19:25.640609 [ 1.626980] pegasus: Pegasus/Pegasus II USB Ethernet driver Jun 30 07:19:25.652625 [ 1.632597] usbcore: registered new interface driver pegasus Jun 30 07:19:25.652625 [ 1.638305] usbcore: registered new interface driver asix Jun 30 07:19:25.664620 [ 1.643795] usbcore: registered new interface driver ax88179_178a Jun 30 07:19:25.664620 [ 1.649937] usbcore: registered new interface driver cdc_ether Jun 30 07:19:25.676624 [ 1.655855] usbcore: registered new interface driver smsc75xx Jun 30 07:19:25.676624 [ 1.661659] usbcore: registered new interface driver smsc95xx Jun 30 07:19:25.688621 [ 1.667483] usbcore: registered new interface driver net1080 Jun 30 07:19:25.688621 [ 1.673212] usbcore: registered new interface driver cdc_subset Jun 30 07:19:25.700628 [ 1.679187] usbcore: registered new interface driver zaurus Jun 30 07:19:25.700628 [ 1.684844] usbcore: registered new interface driver cdc_ncm Jun 30 07:19:25.712605 [ 1.694212] usbcore: registered new interface driver usb-storage Jun 30 07:19:25.712605 [ 1.704732] i2c_dev: i2c /dev entries driver Jun 30 07:19:25.724574 [ 1.723139] device-mapper: uevent: version 1.0.3 Jun 30 07:19:25.748755 [ 1.726555] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev Jun 30 07:19:25.748832 [ 1.736173] cpu cpu0: OPP table can't be empty Jun 30 07:19:25.760649 [ 1.740880] failed to register cpuidle driver Jun 30 07:19:25.760649 [ 1.744285] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Jun 30 07:19:25.772669 [ 1.752638] sdhci: Secure Digital Host Controller Interface driver Jun 30 07:19:25.772669 [ 1.757630] sdhci: Copyright(c) Pierre Ossman Jun 30 07:19:25.784606 [ 1.765690] sdhci-pltfm: SDHCI platform and OF driver helper Jun 30 07:19:25.784606 [ 1.773493] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 07:19:25.796775 [ 1.778946] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Jun 30 07:19:25.808801 [ 1.785640] usbcore: registered new interface driver usbhid Jun 30 07:19:25.808865 [ 1.790276] usbhid: USB HID core driver Jun 30 07:19:25.808911 [ 1.801219] NET: Registered PF_INET6 protocol family Jun 30 07:19:25.820781 [ 1.807488] Segment Routing with IPv6 Jun 30 07:19:25.832807 [ 1.809806] In-situ OAM (IOAM) with IPv6 Jun 30 07:19:25.832866 [ 1.813882] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Jun 30 07:19:25.832916 [ 1.820247] NET: Registered PF_PACKET protocol family Jun 30 07:19:25.844816 [ 1.824960] can: controller area network core Jun 30 07:19:25.844875 [ 1.829342] NET: Registered PF_CAN protocol family Jun 30 07:19:25.856806 [ 1.834183] can: raw protocol Jun 30 07:19:25.856863 [ 1.837212] can: broadcast manager protocol Jun 30 07:19:25.856909 [ 1.841468] can: netlink gateway - max_hops=1 Jun 30 07:19:25.868802 [ 1.846241] Key type dns_resolver registered Jun 30 07:19:25.868861 [ 1.850910] ThumbEE CPU extension supported. Jun 30 07:19:25.868944 [ 1.854622] Registering SWP/SWPB emulation handler Jun 30 07:19:25.880704 [ 1.869002] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level Jun 30 07:19:25.892708 [ 1.875915] Loading compiled-in X.509 certificates Jun 30 07:19:25.904755 [ 1.918872] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 07:19:25.940840 [ 1.922551] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 07:19:25.940902 [ 1.929038] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 07:19:25.952813 [ 1.937298] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 07:19:25.964725 [ 1.986002] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 07:19:26.012809 [ 1.994844] s5m-rtc s5m-rtc: setting system clock to 2000-01-02T00:00:25 UTC (946771225) Jun 30 07:19:26.024779 [ 2.005813] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 07:19:26.024842 [ 2.010453] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 07:19:26.036797 [ 2.014857] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 07:19:26.036859 [ 2.021534] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 07:19:26.048821 [ 2.027453] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 07:19:26.048887 [ 2.033633] clk: Not disabling unused clocks Jun 30 07:19:26.060805 [ 2.037120] PM: genpd: Disabling unused power domains Jun 30 07:19:26.060867 [ 2.045620] Freeing unused kernel image (initmem) memory: 2048K Jun 30 07:19:26.072771 [ 2.051901] Run /init as init process Jun 30 07:19:26.072829 Loading, please wait... Jun 30 07:19:26.096739 Starting systemd-udevd version 252.26-1~deb12u2 Jun 30 07:19:26.168728 [ 3.300532] i2c-gpio i2c-10: using lines 552 (SDA) and 553 (SCL) Jun 30 07:19:27.324762 [ 3.391150] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 07:19:27.420782 [ 3.398352] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 07:19:27.420853 [ 3.412480] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 07:19:27.432772 [ 3.507615] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 30 07:19:27.532794 [ 3.513902] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 30 07:19:27.544698 [ 3.552419] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 30 07:19:27.580729 [ 3.576164] phy phy-12130000.phy.9: phy_power_on was called before phy_init Jun 30 07:19:27.604689 [ 3.581788] exynos-ohci 12120000.usb: USB Host Controller Jun 30 07:19:27.604689 [ 3.592552] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 30 07:19:27.616595 [ 3.598240] ahci-dwc 122f0000.sata: AHCI vers 0001.0300, 32 command slots, 6 Gbps, platform mode Jun 30 07:19:27.628595 [ 3.607133] ahci-dwc 122f0000.sata: 1/1 ports implemented (port mask 0x1) Jun 30 07:19:27.628595 [ 3.613955] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 30 07:19:27.640568 [ 3.638516] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Jun 30 07:19:27.664616 [ 3.646171] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 Jun 30 07:19:27.664616 [ 3.646790] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 07:19:27.676583 [ 3.657983] Synopsys Designware Multimedia Card Interface Driver Jun 30 07:19:27.676583 [ 3.672469] scsi host0: ahci-dwc Jun 30 07:19:27.688553 [ 3.674750] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 126 lpm-pol 0 Jun 30 07:19:27.700573 [ 3.753279] hub 1-0:1.0: USB hub found Jun 30 07:19:27.772556 [ 3.758947] hub 1-0:1.0: 3 ports detected Jun 30 07:19:27.784533 [ 3.804062] phy phy-12130000.phy.9: phy_power_on was called before phy_init Jun 30 07:19:27.832601 [ 3.809656] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 07:19:27.832601 [ 3.815269] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Jun 30 07:19:27.847518 [ 3.850157] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 Jun 30 07:19:27.872613 [ 3.856446] VDD_ALIVE_1.0V: Bringing 1000000uV into 1100000-1100000uV Jun 30 07:19:27.884535 [ 3.889189] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 07:19:27.908556 [ 3.908566] hub 2-0:1.0: USB hub found Jun 30 07:19:27.932566 [ 3.916023] hub 2-0:1.0: 3 ports detected Jun 30 07:19:27.932566 [ 3.938540] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Jun 30 07:19:27.956554 [ 3.946931] s3c-rtc 101e0000.rtc: registered as rtc1 Jun 30 07:19:27.968564 [ 4.202456] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 30 07:19:28.224569 [ 4.212875] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 30 07:19:28.236616 [ 4.218246] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 30 07:19:28.248607 [ 4.231996] ata1.00: configured for UDMA/133 Jun 30 07:19:28.248607 [ 4.235356] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 30 07:19:28.258251 [ 4.249506] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 30 07:19:28.272603 [ 4.255684] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 30 07:19:28.284576 [ 4.264423] sd 0:0:0:0: [sda] Write Protect is off Jun 30 07:19:28.284576 [ 4.271994] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 30 07:19:28.296595 [ 4.280581] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 30 07:19:28.308528 [ 4.312762] sda: sda1 sda2 < sda5 > Jun 30 07:19:28.332583 [ 4.316780] sd 0:0:0:0: [sda] Attached SCSI disk Jun 30 07:19:28.332583 [ 4.322474] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 30 07:19:28.344588 [ 4.329668] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 30 07:19:28.356547 [ 4.350090] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 30 07:19:28.368577 [ 4.355473] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 30 07:19:28.380601 [ 4.362134] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 128,32 bit host data width,128 deep fifo Jun 30 07:19:28.392583 [ 4.376374] mmc_host mmc0: card is polling. Jun 30 07:19:28.392583 [ 4.383906] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 30 07:19:28.404586 [ 4.389011] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 30 07:19:28.416615 [ 4.394545] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 129,32 bit host data width,128 deep fifo Jun 30 07:19:28.416615 [ 4.395271] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 07:19:28.428601 [ 4.414212] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Jun 30 07:19:28.440601 [ 4.417248] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 07:19:28.452597 [ 4.422316] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 07:19:28.452597 [ 4.435878] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 07:19:28.464544 [ 4.461246] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002000010 Jun 30 07:19:28.488587 [ 4.472161] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Jun 30 07:19:28.500601 [ 4.477071] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 07:19:28.500601 [ 4.482636] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 07:19:28.512574 [ 4.490307] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 07:19:28.512574 [ 4.509104] hub 3-0:1.0: USB hub found Jun 30 07:19:28.524501 [ 4.516292] hub 3-0:1.0: 1 port detected Jun 30 07:19:28.536585 [ 4.520062] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 07:19:28.548585 [ 4.527951] hub 4-0:1.0: USB hub found Jun 30 07:19:28.548585 [ 4.531057] hub 4-0:1.0: 1 port detected Jun 30 07:19:28.548585 [ 4.593756] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 30 07:19:28.620625 [ 4.602807] mmc0: new DDR MMC card at address 0001 Jun 30 07:19:28.620625 [ 4.607755] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Jun 30 07:19:28.632579 [ 4.614000] mmcblk0: p1 p2 p3 p4 Jun 30 07:19:28.632579 [ 4.619241] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Jun 30 07:19:28.644555 [ 4.646879] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Jun 30 07:19:28.668710 [ 4.652542] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Jun 30 07:19:28.680553 [ 4.667378] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 07:19:28.692598 [ 4.676024] mmc1: new high speed SDHC card at address aaaa Jun 30 07:19:28.704568 [ 4.682496] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Jun 30 07:19:28.704568 [ 5.054904] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 07:19:29.080564 [ 5.231486] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 07:19:29.260551 [ 5.340373] I/O error, dev mmcblk1, sector 7744000 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 07:19:29.368543 [ 5.448687] I/O error, dev mmcblk1, sector 7744001 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 07:19:29.476514 [ 5.556987] I/O error, dev mmcblk1, sector 7744002 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 07:19:29.584525 [ 5.665275] I/O error, dev mmcblk1, sector 7744003 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 07:19:29.689680 [ 5.773560] I/O error, dev mmcblk1, sector 7744004 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 07:19:29.797754 [ 5.881803] I/O error, dev mmcblk1, sector 7744005 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 07:19:29.905672 [ 5.990083] I/O error, dev mmcblk1, sector 7744006 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 07:19:30.013685 [ 6.098336] I/O error, dev mmcblk1, sector 7744007 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 07:19:30.121699 [ 6.206620] I/O error, dev mmcblk1, sector 7744008 op 0x0:(READ) flags 0x80700 phys_seg 13 prio class 0 Jun 30 07:19:30.229657 [ 6.314895] I/O error, dev mmcblk1, sector 7744009 op 0x0:(READ) flags 0x80700 phys_seg 13 prio class 0 Jun 30 07:19:30.337691 [ 8.341293] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 07:19:32.365684 [ 8.517628] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 07:19:32.545690 [ 9.327090] Buffer I/O error on dev mmcblk1, logical block 968000, async page read Jun 30 07:19:33.349699 Begin: Loading essential drivers ... done. Jun 30 07:19:33.397628 Begin: Running /scripts/init-premount ... done. Jun 30 07:19:36.413704 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 30 07:19:36.425673 Begin: Running /scripts/local-premount ... done. Jun 30 07:19:36.425732 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 30 07:19:36.509632 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 30 07:19:36.617633 /dev/mapper/arndale--metrocentre--vg-root: recovering journal Jun 30 07:19:36.857660 /dev/mapper/arndale--metrocentre--vg-root: clean, 46076/1220608 files, 606042/4882432 blocks Jun 30 07:19:37.817814 done. Jun 30 07:19:37.841686 [ 13.829339] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 30 07:19:37.853727 [ 14.142016] EXT4-fs (dm-0): mounted filesystem 9a2c23c3-c633-42fb-a651-f46dd527031e ro with ordered data mode. Quota mode: disabled. Jun 30 07:19:38.165863 done. Jun 30 07:19:38.165895 Begin: Running /scripts/local-bottom ... done. Jun 30 07:19:38.225713 Begin: Running /scripts/init-bottom ... done. Jun 30 07:19:38.273681 INIT: version 3.06 booting Jun 30 07:19:38.669705 INIT: No inittab.d directory found Jun 30 07:19:38.741723 [ 14.740457] wm8994 3-001a: Device is not a WM8994, ID is 0 Jun 30 07:19:38.765734 [ 14.745842] wm8994 3-001a: probe with driver wm8994 failed with error -22 Jun 30 07:19:38.765798 Using makefile-style concurrent boot in runlevel S. Jun 30 07:19:39.101708 Starting hotplug events dispatcher: systemd-udevd. Jun 30 07:19:40.769691 Synthesizing the initial hotplug events (subsystems)...done. Jun 30 07:19:41.237702 Synthesizing the initial hotplug events (devices)...done. Jun 30 07:19:42.017696 Waiting for /dev to be fully populated...[ 18.222322] usb3503 usb-hub: switched to HUB mode Jun 30 07:19:42.245751 [ 18.225748] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 07:19:42.245811 [ 18.235345] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 30 07:19:42.257736 [ 18.282593] mc: Linux media interface: v0.10 Jun 30 07:19:42.305750 [ 18.290266] s5p-secss 10830000.sss: s5p-sss driver registered Jun 30 07:19:42.317682 [ 18.583403] videodev: Linux video capture interface: v2.00 Jun 30 07:19:42.605725 [ 18.673097] usb 2-3: new high-speed USB device number 2 using exynos-ehci Jun 30 07:19:42.701668 [ 18.855572] s5p-mfc 11000000.codec: Adding to iommu group 0 Jun 30 07:19:42.881713 [ 18.866223] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Jun 30 07:19:42.893755 [ 18.874234] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 07:19:42.905685 [ 18.910053] hub 2-3:1.0: USB hub found Jun 30 07:19:42.929694 [ 18.921291] hub 2-3:1.0: 3 ports detected Jun 30 07:19:42.941697 [ 18.932907] exynos-gsc 13e00000.gsc: Adding to iommu group 1 Jun 30 07:19:42.953743 [ 18.937686] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 07:19:42.965730 [ 18.951605] exynos-gsc 13e10000.gsc: Adding to iommu group 2 Jun 30 07:19:42.977688 [ 18.976789] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 07:19:43.001764 [ 18.984194] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 07:19:43.013738 [ 18.995340] exynos-gsc 13e20000.gsc: Adding to iommu group 3 Jun 30 07:19:43.013824 [ 19.004096] exynos-gsc 13e30000.gsc: Adding to iommu group 4 Jun 30 07:19:43.025715 [ 19.017316] s5p-mfc 11000000.codec: decoder registered as /dev/video4 Jun 30 07:19:43.037741 [ 19.024211] s5p-mfc 11000000.codec: encoder registered as /dev/video5 Jun 30 07:19:43.049663 [ 19.075628] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 07:19:43.097758 [ 19.159372] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Jun 30 07:19:43.181756 [ 19.237542] blk_print_req_error: 25 callbacks suppressed Jun 30 07:19:43.265645 [ 19.237638] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 07:19:43.265685 [ 19.252928] usb 2-3.2: new high-speed USB device number 3 using exynos-ehci Jun 30 07:19:43.277607 [ 19.354763] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 07:19:43.385671 [ 19.416760] hub 2-3.2:1.0: USB hub found Jun 30 07:19:43.433704 [ 19.421294] hub 2-3.2:1.0: 4 ports detected Jun 30 07:19:43.445625 [ 19.464921] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 07:19:43.493662 [ 19.574224] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 07:19:43.601720 [ 19.744939] I/O error, dev mmcblk1, sector 7743712 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 Jun 30 07:19:43.769790 [ 19.753033] usb 2-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 30 07:19:43.781691 [ 19.808318] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 07:19:43.829764 [ 19.816061] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 07:19:43.841760 [ 19.824749] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 07:19:43.853751 [ 19.838473] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 07:19:43.865751 [ 19.846155] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 07:19:43.877750 [ 19.854889] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 07:19:43.877824 [ 19.866433] I/O error, dev mmcblk1, sector 7743714 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 Jun 30 07:19:43.889749 [ 19.905503] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 30 07:19:43.925737 [ 20.171311] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 07:19:44.201681 [ 20.342783] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 07:19:44.369774 [ 20.457158] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 07:19:44.477851 [ 20.574298] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 07:19:44.597857 [ 20.581961] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 07:19:44.609866 [ 20.595239] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 07:19:44.621820 [ 20.607604] Asix Electronics AX88772A usb-002:004:10: attached PHY driver (mii_bus:phy_addr=usb-002:004:10, irq=POLL) Jun 30 07:19:44.633836 [ 20.617490] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 8a:0c:b5:34:e0:53 Jun 30 07:19:44.645814 [ 20.660236] usbcore: registered new device driver onboard-usb-dev Jun 30 07:19:44.681844 [ 20.667377] usb 2-3.2.4: USB disconnect, device number 4 Jun 30 07:19:44.693830 [ 20.671661] asix 2-3.2.4:1.0 eth0: unregister 'asix' usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet Jun 30 07:19:44.693904 [ 20.833068] hub 2-3.2:1.0: USB hub found Jun 30 07:19:44.849813 [ 20.836037] hub 2-3.2:1.0: 4 ports detected Jun 30 07:19:44.861802 [ 20.848332] hub 2-3.2:1.0: USB hub found Jun 30 07:19:44.873784 [ 20.851255] hub 2-3.2:1.0: 4 ports detected Jun 30 07:19:44.873843 [ 21.192319] usb 2-3.2.4: new high-speed USB device number 5 using exynos-ehci Jun 30 07:19:45.221758 [ 22.024234] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:005:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 07:19:46.049854 [ 22.038604] Asix Electronics AX88772A usb-002:005:10: attached PHY driver (mii_bus:phy_addr=usb-002:005:10, irq=POLL) Jun 30 07:19:46.061875 [ 22.048483] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 8a:0c:b5:34:e0:53 Jun 30 07:19:46.073759 [ 22.167737] asix 2-3.2.4:1.0 enx8a0cb534e053: renamed from eth0 Jun 30 07:19:46.193724 done. Jun 30 07:19:46.253735 [ 22.634267] EXT4-fs (dm-0): re-mounted 9a2c23c3-c633-42fb-a651-f46dd527031e r/w. Quota mode: disabled. Jun 30 07:19:46.661815 Checking file systems.../dev/sda1: recovering journal Jun 30 07:19:48.149815 /dev/sda1: clean, 2179/61056 files, 44464/243968 blocks Jun 30 07:19:48.269807 done. Jun 30 07:19:48.317772 Cleaning up temporary files... /tmp. Jun 30 07:19:48.545778 [ 24.724374] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 30 07:19:48.749741 [ 24.776268] EXT4-fs (sda1): mounted filesystem 1c45002d-81bb-4520-b056-4d2250d49dd1 r/w with ordered data mode. Quota mode: disabled. Jun 30 07:19:48.809722 [ 24.876634] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k Jun 30 07:19:48.905704 Mounting local filesystems...done. Jun 30 07:19:49.169743 Activating swapfile swap, if any...done. Jun 30 07:19:49.169801 Cleaning up temporary files.... Jun 30 07:19:49.205677 Starting Setting kernel variables: sysctl. Jun 30 07:19:49.385708 Configuring network interfaces...RTNETLINK answers: Operation not supported Jun 30 07:19:50.093700 done. Jun 30 07:19:50.093755 Cleaning up temporary files.... Jun 30 07:19:50.153702 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Jun 30 07:19:50.369710 Starting nftables: none Jun 30 07:19:50.421699 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Jun 30 07:19:50.517726 failed! Jun 30 07:19:50.517778 startpar: service(s) returned failure: nftables ... failed! Jun 30 07:19:50.517826 INIT: Entering runlevel: 2 Jun 30 07:19:50.529696 Using makefile-style concurrent boot in runlevel 2. Jun 30 07:19:50.553718 Starting Apache httpd web server: apache2AH00557: apache2: apr_sockaddr_info_get() failed for arndale-metrocentre Jun 30 07:20:16.437840 AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1. Set the 'ServerName' directive globally to suppress this message Jun 30 07:20:16.449749 . Jun 30 07:20:29.569804 Starting SMP IRQ Balancer: irqbalance. Jun 30 07:20:30.085751 Starting NTP server: ntpd2000-01-02T00:01:29 ntpd[1111]: INIT: ntpd ntpsec-1.2.2: Starting Jun 30 07:20:30.109844 2000-01-02T00:01:29 ntpd[1111]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 30 07:20:30.121824 . Jun 30 07:20:30.121875 Starting system message bus: dbus. Jun 30 07:20:30.433779 Starting OpenBSD Secure Shell server: sshd. Jun 30 07:20:31.373795 Starting /usr/local/sbin/xenstored... Jun 30 07:20:33.437657 Setting domain 0 name, domid and JSON config... Jun 30 07:20:33.437657 Done setting up Dom0 Jun 30 07:20:33.449625 Starting xenconsoled... Jun 30 07:20:33.449625 Starting QEMU as disk backend for dom0 Jun 30 07:20:33.449625 Jun 30 07:20:34.529626 Debian GNU/Linux 12 arndale-metrocentre hvc0 Jun 30 07:20:34.529883 Jun 30 07:20:34.550304 arndale-metrocentre login: INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 07:22:13.569771 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 07:28:54.904733 Jun 30 07:29:54.521650 Jun 30 07:29:54.521650 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 07:29:54.521650 Jun 30 07:29:54.521650 CPU: Exynos5250@1000MHz Jun 30 07:29:54.533649 Jun 30 07:29:54.533649 Board: Arndale Jun 30 07:29:54.533649 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 07:29:54.533649 ready Jun 30 07:29:54.533649 DRAM: 2 GiB Jun 30 07:29:54.533649 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 07:29:54.557597 trace: enabled Jun 30 07:29:54.593608 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 07:29:54.953616 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 07:29:55.013645 In: serial Jun 30 07:29:55.013645 Out: serial Jun 30 07:29:55.013645 Err: serial Jun 30 07:29:55.013645 SCSI: ARNDALE SCSI INIT Jun 30 07:29:55.013645 Target spinup took 0 ms. Jun 30 07:29:55.025674 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 07:29:55.025674 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 07:29:55.025674 Net: Net Initialization Skipped Jun 30 07:29:55.037657 No ethernet found. Jun 30 07:29:55.037657 Hostname: arndale-metrocentre Jun 30 07:29:55.037657 Hit any key to stop autoboot: 2  1  0 Jun 30 07:29:56.957616 (Re)start USB... Jun 30 07:29:56.957616 USB0: USB EHCI 1.00 Jun 30 07:29:56.969619 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 07:30:02.557846 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 07:30:02.569718 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 07:30:03.013862 Waiting for Ethernet connection... done. Jun 30 07:30:04.753829 BOOTP broadcast 1 Jun 30 07:30:04.753908 BOOTP broadcast 2 Jun 30 07:30:08.821765 DHCP client bound to address 10.149.64.44 (4237 ms) Jun 30 07:30:08.833765 Using asx0 device Jun 30 07:30:08.833819 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 07:30:08.833869 Filename 'pxelinux.0'. Jun 30 07:30:08.833910 Load address: 0x43e00000 Jun 30 07:30:08.845666 Loading: *### Jun 30 07:30:08.857702 2.4 MiB/s Jun 30 07:30:08.857758 done Jun 30 07:30:08.857798 Bytes transferred = 42430 (a5be hex) Jun 30 07:30:08.857842 missing environment variable: pxeuuid Jun 30 07:30:08.857885 Retrieving file: pxelinux.cfg/0A95402C Jun 30 07:30:08.869743 Using asx0 device Jun 30 07:30:08.869797 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 07:30:08.869845 Filename 'pxelinux.cfg/0A95402C'. Jun 30 07:30:08.881754 Load address: 0x51000000 Jun 30 07:30:08.881810 Loading: *# Jun 30 07:30:08.881850 238.3 KiB/s Jun 30 07:30:08.881890 done Jun 30 07:30:08.881927 Bytes transferred = 734 (2de hex) Jun 30 07:30:08.881970 Config file found Jun 30 07:30:08.893667 Ignoring unknown command: serial Jun 30 07:30:08.893699 1: ^Overwrite Jun 30 07:30:08.893722 Retrieving file: /osstest/tmp//arndale-metrocentre--initrd.gz Jun 30 07:30:08.893748 Using asx0 device Jun 30 07:30:08.893769 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 07:30:08.905658 Filename '/osstest/tmp//arndale-metrocentre--initrd.gz'. Jun 30 07:30:08.905691 Load address: 0x43300000 Jun 30 07:30:08.917690 Loading: *################################################################# Jun 30 07:30:09.245595 ################################################################# Jun 30 07:30:09.569706 ################################################################# Jun 30 07:30:09.893630 ################################################################# Jun 30 07:30:10.217688 ################################################################# Jun 30 07:30:10.541713 ################################################################# Jun 30 07:30:10.865710 ################################################################# Jun 30 07:30:11.201709 ################################################################# Jun 30 07:30:11.513689 ################################################################# Jun 30 07:30:11.837683 ################################################################# Jun 30 07:30:12.164425 ################################################################# Jun 30 07:30:12.500482 ################################################################# Jun 30 07:30:12.824448 ################################################################# Jun 30 07:30:13.140426 ################################################################# Jun 30 07:30:18.420449 ################################################################# Jun 30 07:30:18.732478 ################################################################# Jun 30 07:30:19.032605 ################################################################# Jun 30 07:30:24.333741 ################################################################# Jun 30 07:30:24.609709 ################################################################# Jun 30 07:30:24.885765 ################################################################# Jun 30 07:30:25.149650 ################################################EHCI timed out on TD - token=0x8008d80 Jun 30 07:30:30.169760 T ################# Jun 30 07:30:30.433710 ################################################################# Jun 30 07:30:30.733709 ################################################################# Jun 30 07:30:31.033676 ################################################################# Jun 30 07:30:31.297705 ################################################################# Jun 30 07:30:31.549656 ################################################################# Jun 30 07:30:31.801715 ################################################################# Jun 30 07:30:32.053699 ##EHCI timed out on TD - token=0x8008d80 Jun 30 07:30:36.869727 T #################################### Jun 30 07:30:37.205622 871.1 KiB/s Jun 30 07:30:37.217734 done Jun 30 07:30:37.217734 Bytes transferred = 26310347 (19176cb hex) Jun 30 07:30:37.217781 Retrieving file: /osstest/debian-installer/armhf/2024-03-26-bookworm/linux Jun 30 07:30:37.229766 Using asx0 device Jun 30 07:30:37.229766 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 07:30:37.241750 Filename '/osstest/debian-installer/armhf/2024-03-26-bookworm/linux'. Jun 30 07:30:37.241776 Load address: 0x42000000 Jun 30 07:30:37.241819 Loading: *################################################################# Jun 30 07:30:37.569714 ################################################################# Jun 30 07:30:37.893711 ################################################################# Jun 30 07:30:38.205687 ################################################################# Jun 30 07:30:38.529714 ################################################################# Jun 30 07:30:38.853712 ############################################# Jun 30 07:30:39.081749 2.7 MiB/s Jun 30 07:30:39.081771 done Jun 30 07:30:39.081810 Bytes transferred = 5423616 (52c200 hex) Jun 30 07:30:39.081855 append: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-metrocentre url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=42818 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-metrocentre--initrd.gz --- console=ttySAC2,115200n8 Jun 30 07:30:39.129754 Retrieving file: /osstest/debian-installer/armhf/2024-03-26-bookworm/dtbs/exynos5250-arndale.dtb Jun 30 07:30:39.141895 Using asx0 device Jun 30 07:30:39.141948 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 07:30:39.141998 Filename '/osstest/debian-installer/armhf/2024-03-26-bookworm/dtbs/exynos5250-arndale.dtb'. Jun 30 07:30:39.153745 Load address: 0x43000000 Jun 30 07:30:39.153788 Loading: *#### Jun 30 07:30:39.177767 2.3 MiB/s Jun 30 07:30:39.177782 done Jun 30 07:30:39.177821 Bytes transferred = 46686 (b65e hex) Jun 30 07:30:39.177865 Kernel image @ 0x42000000 [ 0x000000 - 0x52c200 ] Jun 30 07:30:39.177909 ## Flattened Device Tree blob at 43000000 Jun 30 07:30:39.189778 Booting using the fdt blob at 0x43000000 Jun 30 07:30:39.189794 Loading Ramdisk to 4e6e8000, end 4ffff6cb ... OK Jun 30 07:30:39.609724 Loading Device Tree to 4e6d9000, end 4e6e765d ... OK Jun 30 07:30:39.621747 Jun 30 07:30:39.621756 Starting kernel ...(fake run for tracing) Jun 30 07:30:39.633741 Jun 30 07:30:39.633749 Jun 30 07:30:39.633787 Starting kernel ... Jun 30 07:30:39.633828 Jun 30 07:30:39.633865 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 07:30:45.733790 [ 0.000000] Linux version 6.1.0-18-armmp (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.76-1 (2024-02-01) Jun 30 07:30:45.745710 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 30 07:30:45.757717 [ 0.000000] CPU: div instructions available: patching division code Jun 30 07:30:45.757751 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 07:30:45.769692 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 07:30:45.781644 [ 0.000000] Memory policy: Data cache writealloc Jun 30 07:30:45.781701 [ 0.000000] efi: UEFI not found. Jun 30 07:30:45.781727 [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 Jun 30 07:30:45.793643 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 07:30:45.793675 [ 0.000000] Zone ranges: Jun 30 07:30:45.793698 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Jun 30 07:30:45.805642 [ 0.000000] Normal empty Jun 30 07:30:45.805673 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Jun 30 07:30:45.817711 [ 0.000000] Movable zone start for each node Jun 30 07:30:45.817771 [ 0.000000] Early memory node ranges Jun 30 07:30:45.817815 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 07:30:45.829703 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 07:30:45.829767 [ 0.000000] percpu: Embedded 18 pages/cpu s41620 r8192 d23916 u73728 Jun 30 07:30:45.841736 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Jun 30 07:30:45.841800 [ 0.000000] Kernel command line: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-metrocentre url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=42818 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-metrocentre--initrd.gz --- console=ttySAC2,115200n8 Jun 30 07:30:45.889684 [ 0.000000] Unknown kernel command line parameters "preseed --- vga=normal auto=true hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=42818 domain=test-lab.xenproject.org", will be passed to user space. Jun 30 07:30:45.925661 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Jun 30 07:30:45.937756 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 07:30:45.949745 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Jun 30 07:30:45.949808 [ 0.000000] Memory: 2015996K/2097152K available (11264K kernel code, 1696K rwdata, 3716K rodata, 2048K init, 378K bss, 64772K reserved, 16384K cma-reserved, 1294332K highmem) Jun 30 07:30:45.961767 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 07:30:45.973699 [ 0.000000] ftrace: allocating 39582 entries in 117 pages Jun 30 07:30:45.973732 [ 0.000000] ftrace: allocated 116 pages with 4 groups Jun 30 07:30:45.985714 [ 0.000000] trace event string verifier disabled Jun 30 07:30:45.985773 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 07:30:45.997687 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Jun 30 07:30:45.997754 [ 0.000000] Rude variant of Tasks RCU enabled. Jun 30 07:30:46.009661 [ 0.000000] Tracing variant of Tasks RCU enabled. Jun 30 07:30:46.009722 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Jun 30 07:30:46.021750 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 07:30:46.021814 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 07:30:46.033734 [ 0.000000] GIC: Using split EOI/Deactivate mode Jun 30 07:30:46.033794 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 07:30:46.045691 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 07:30:46.045725 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Jun 30 07:30:46.057753 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Jun 30 07:30:46.057825 [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Jun 30 07:30:46.069745 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Jun 30 07:30:46.081783 [ 0.002631] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Jun 30 07:30:46.081846 [ 0.002645] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 07:30:46.093732 [ 0.002660] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 07:30:46.105748 [ 0.002672] Ignoring duplicate/late registration of read_current_timer delay Jun 30 07:30:46.105812 [ 0.003041] Console: colour dummy device 80x30 Jun 30 07:30:46.117717 [ 0.003084] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Jun 30 07:30:46.117793 [ 0.003098] CPU: Testing write buffer coherency: ok Jun 30 07:30:46.129689 [ 0.003139] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 07:30:46.141639 [ 0.003147] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 07:30:46.141673 [ 0.003154] pid_max: default: 32768 minimum: 301 Jun 30 07:30:46.153642 [ 0.003511] LSM: Security Framework initializing Jun 30 07:30:46.153676 [ 0.003582] landlock: Up and running. Jun 30 07:30:46.153700 [ 0.003586] Yama: disabled by default; enable with sysctl kernel.yama.* Jun 30 07:30:46.165737 [ 0.003773] AppArmor: AppArmor initialized Jun 30 07:30:46.165796 [ 0.003785] TOMOYO Linux initialized Jun 30 07:30:46.165845 [ 0.003827] LSM support for eBPF active Jun 30 07:30:46.177739 [ 0.004070] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 07:30:46.177807 [ 0.004085] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 07:30:46.189753 [ 0.005524] /cpus/cpu@0 missing clock-frequency property Jun 30 07:30:46.189813 [ 0.005550] /cpus/cpu@1 missing clock-frequency property Jun 30 07:30:46.201644 [ 0.005563] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 07:30:46.201716 [ 0.006517] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 07:30:46.213679 [ 0.006523] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 07:30:46.213713 [ 0.006627] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 07:30:46.225757 [ 0.006633] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 07:30:46.237720 [ 0.006780] Setting up static identity map for 0x40300000 - 0x403000ac Jun 30 07:30:46.237755 [ 0.007949] rcu: Hierarchical SRCU implementation. Jun 30 07:30:46.237781 [ 0.007955] rcu: Max phase no-delay instances is 1000. Jun 30 07:30:46.249767 [ 0.010097] EFI services will not be available. Jun 30 07:30:46.249826 [ 0.010442] smp: Bringing up secondary CPUs ... Jun 30 07:30:46.261760 [ 0.011176] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 07:30:46.261823 [ 0.011188] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 07:30:46.273699 [ 0.011322] smp: Brought up 1 node, 2 CPUs Jun 30 07:30:46.273755 [ 0.011330] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 07:30:46.285743 [ 0.011338] CPU: All CPU(s) started in HYP mode. Jun 30 07:30:46.285803 [ 0.011342] CPU: Virtualization extensions available. Jun 30 07:30:46.297730 [ 0.012014] devtmpfs: initialized Jun 30 07:30:46.297788 [ 0.023072] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 07:30:46.309741 [ 0.023324] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Jun 30 07:30:46.309815 [ 0.023348] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 07:30:46.321743 [ 0.023830] pinctrl core: initialized pinctrl subsystem Jun 30 07:30:46.321804 [ 0.024567] DMI not present or invalid. Jun 30 07:30:46.333740 [ 0.025248] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 07:30:46.333833 [ 0.030637] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 07:30:46.345654 [ 0.032199] audit: initializing netlink subsys (disabled) Jun 30 07:30:46.345716 [ 0.032405] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 Jun 30 07:30:46.357750 [ 0.033583] thermal_sys: Registered thermal governor 'fair_share' Jun 30 07:30:46.357812 [ 0.033590] thermal_sys: Registered thermal governor 'bang_bang' Jun 30 07:30:46.369646 [ 0.033595] thermal_sys: Registered thermal governor 'step_wise' Jun 30 07:30:46.369680 [ 0.033599] thermal_sys: Registered thermal governor 'user_space' Jun 30 07:30:46.381640 [ 0.033604] thermal_sys: Registered thermal governor 'power_allocator' Jun 30 07:30:46.381675 [ 0.033972] No ATAGs? Jun 30 07:30:46.393645 [ 0.034040] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jun 30 07:30:46.393683 [ 0.034048] hw-breakpoint: maximum watchpoint size is 8 bytes. Jun 30 07:30:46.405700 [ 0.035143] Serial: AMBA PL011 UART driver Jun 30 07:30:46.405770 [ 0.091436] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Jun 30 07:30:46.417755 [ 0.102446] iommu: Default domain type: Translated Jun 30 07:30:46.417815 [ 0.102454] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 07:30:46.429741 [ 0.103438] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Jun 30 07:30:46.429804 [ 0.103992] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 07:30:46.441637 [ 0.104004] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 07:30:46.441671 [ 0.104655] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 07:30:46.453754 [ 0.104686] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 07:30:46.465742 [ 0.104869] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 07:30:46.465803 [ 0.105225] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 07:30:46.465851 [ 0.105235] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 07:30:46.477782 [ 0.105629] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 07:30:46.477869 [ 0.105918] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 07:30:46.489689 [ 0.105928] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 07:30:46.489751 [ 0.106203] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 07:30:46.501737 [ 0.106304] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 07:30:46.501797 [ 0.106313] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 07:30:46.513640 [ 0.106510] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 07:30:46.513674 [ 0.106710] pps_core: LinuxPPS API ver. 1 registered Jun 30 07:30:46.513700 [ 0.106715] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 07:30:46.525720 [ 0.106732] PTP clock support registered Jun 30 07:30:46.525752 [ 0.108222] NetLabel: Initializing Jun 30 07:30:46.537643 [ 0.108228] NetLabel: domain hash size = 128 Jun 30 07:30:46.537676 [ 0.108232] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Jun 30 07:30:46.549707 [ 0.108304] NetLabel: unlabeled traffic allowed by default Jun 30 07:30:46.549740 [ 0.108465] vgaarb: loaded Jun 30 07:30:46.549764 [ 0.109136] clocksource: Switched to clocksource mct-frc Jun 30 07:30:46.561706 [ 0.178081] VFS: Disk quotas dquot_6.6.0 Jun 30 07:30:46.561738 [ 0.178179] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jun 30 07:30:46.573738 [ 0.178924] AppArmor: AppArmor Filesystem Enabled Jun 30 07:30:46.573799 [ 0.187986] NET: Registered PF_INET protocol family Jun 30 07:30:46.573847 [ 0.188196] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Jun 30 07:30:46.585773 [ 0.189831] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 07:30:46.597751 [ 0.189924] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 07:30:46.597841 [ 0.189948] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Jun 30 07:30:46.609745 [ 0.190042] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Jun 30 07:30:46.621741 [ 0.190271] TCP: Hash tables configured (established 8192 bind 8192) Jun 30 07:30:46.621804 [ 0.190496] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Jun 30 07:30:46.633744 [ 0.190583] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 07:30:46.633807 [ 0.190623] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 07:30:46.645724 [ 0.190824] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 07:30:46.645786 [ 0.190858] NET: Registered PF_XDP protocol family Jun 30 07:30:46.657644 [ 0.190868] PCI: CLS 0 bytes, default 64 Jun 30 07:30:46.657676 [ 0.191386] Trying to unpack rootfs image as initramfs... Jun 30 07:30:46.669725 [ 0.191804] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Jun 30 07:30:46.669787 [ 0.192008] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Jun 30 07:30:46.681686 [ 0.193632] Initialise system trusted keyrings Jun 30 07:30:46.681718 [ 0.193736] Key type blacklist registered Jun 30 07:30:46.693743 [ 0.193964] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Jun 30 07:30:46.693808 [ 0.201203] zbud: loaded Jun 30 07:30:46.693852 [ 0.202253] integrity: Platform Keyring initialized Jun 30 07:30:46.705647 [ 0.202291] integrity: Machine keyring initialized Jun 30 07:30:46.705680 [ 0.202299] Key type asymmetric registered Jun 30 07:30:46.705705 [ 0.202306] Asymmetric key parser 'x509' registered Jun 30 07:30:46.717747 [ 1.561455] Freeing initrd memory: 25696K Jun 30 07:30:46.717806 [ 1.573271] alg: self-tests for CTR-KDF (hmac(sha256)) passed Jun 30 07:30:46.729700 [ 1.573554] bounce: pool size: 64 pages Jun 30 07:30:46.729751 [ 1.573719] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Jun 30 07:30:46.741734 [ 1.573880] io scheduler mq-deadline registered Jun 30 07:30:46.741793 [ 1.579057] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Jun 30 07:30:46.753741 [ 1.599938] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 07:30:46.753809 [ 1.599949] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 07:30:46.765736 [ 1.602286] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 07:30:46.777707 [ 1.602295] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 07:30:46.777772 [ 1.603091] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 07:30:46.789645 [ 1.603099] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 07:30:46.801678 [ 1.603923] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 07:30:46.801715 [ 1.603932] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 07:30:46.813768 [ 1.606332] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 07:30:46.825748 [ 1.609111] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 07:30:46.837638 [ 1.611849] Serial: AMBA driver Jun 30 07:30:46.837670 [ 1.612097] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 07:30:46.849708 [ 1.612590] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 07:30:46.849747 [ 1.613039] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 07:30:46.861688 [ 2.743936] printk: console [ttySAC2] enabled Jun 30 07:30:46.861740 [ 2.748752] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Jun 30 07:30:46.873646 [ 2.759441] STM32 USART driver initialized Jun 30 07:30:46.885659 [ 2.773633] mousedev: PS/2 mouse device common for all mice Jun 30 07:30:46.897695 [ 2.811877] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 07:30:46.933728 [ 2.820535] s5m-rtc s5m-rtc: setting system clock to 2000-01-02T00:00:53 UTC (946771253) Jun 30 07:30:46.945640 [ 2.830330] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Jun 30 07:30:46.957740 [ 2.837798] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 07:30:46.957803 [ 2.845768] NET: Registered PF_INET6 protocol family Jun 30 07:30:46.969594 [ 2.859625] Segment Routing with IPv6 Jun 30 07:30:46.981743 [ 2.861917] In-situ OAM (IOAM) with IPv6 Jun 30 07:30:46.981807 [ 2.865813] mip6: Mobile IPv6 Jun 30 07:30:46.981831 [ 2.868682] NET: Registered PF_PACKET protocol family Jun 30 07:30:46.993643 [ 2.873870] mpls_gso: MPLS GSO support Jun 30 07:30:46.993675 [ 2.878082] ThumbEE CPU extension supported. Jun 30 07:30:46.993700 [ 2.881716] Registering SWP/SWPB emulation handler Jun 30 07:30:47.005683 [ 2.886988] registered taskstats version 1 Jun 30 07:30:47.005715 [ 2.890592] Loading compiled-in X.509 certificates Jun 30 07:30:47.017695 [ 3.347215] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Jun 30 07:30:47.473706 [ 3.354555] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Jun 30 07:30:47.485739 [ 3.365668] zswap: loaded using pool lzo/zbud Jun 30 07:30:47.485802 [ 3.369632] Key type .fscrypt registered Jun 30 07:30:47.485827 [ 3.372839] Key type fscrypt-provisioning registered Jun 30 07:30:47.497697 [ 3.386725] Key type encrypted registered Jun 30 07:30:47.509752 [ 3.389318] AppArmor: AppArmor sha1 policy hashing enabled Jun 30 07:30:47.509813 [ 3.394776] ima: No TPM chip found, activating TPM-bypass! Jun 30 07:30:47.521748 [ 3.400239] ima: Allocated hash algorithm: sha256 Jun 30 07:30:47.521809 [ 3.404959] ima: No architecture policies found Jun 30 07:30:47.521855 [ 3.409496] evm: Initialising EVM extended attributes: Jun 30 07:30:47.533680 [ 3.414537] evm: security.selinux Jun 30 07:30:47.533711 [ 3.417840] evm: security.SMACK64 (disabled) Jun 30 07:30:47.545736 [ 3.422091] evm: security.SMACK64EXEC (disabled) Jun 30 07:30:47.545797 [ 3.426689] evm: security.SMACK64TRANSMUTE (disabled) Jun 30 07:30:47.545845 [ 3.431723] evm: security.SMACK64MMAP (disabled) Jun 30 07:30:47.557731 [ 3.436321] evm: security.apparmor Jun 30 07:30:47.557762 [ 3.439706] evm: security.ima Jun 30 07:30:47.557786 [ 3.442657] evm: security.capability Jun 30 07:30:47.569635 [ 3.446223] evm: HMAC attrs: 0x1 Jun 30 07:30:47.569667 [ 4.030222] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 07:30:48.157722 [ 4.056539] Freeing unused kernel image (initmem) memory: 2048K Jun 30 07:30:48.181690 [ 4.061430] Checked W+X mappings: passed, no W+X pages found Jun 30 07:30:48.181725 [ 4.066669] Run /init as init process Jun 30 07:30:48.193537 [ 4.648941] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 07:30:48.772846 [ 4.708762] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 07:30:48.832826 [ 4.709013] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 07:30:48.844809 [ 4.729287] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 07:30:48.856815 [ 4.730074] usbcore: registered new interface driver usbfs Jun 30 07:30:48.856875 [ 4.753446] usbcore: registered new interface driver hub Jun 30 07:30:48.880790 [ 4.758508] usbcore: registered new device driver usb Jun 30 07:30:48.880851 [ 4.770424] phy phy-12130000.phy.3: phy_power_on was called before phy_init Jun 30 07:30:48.892841 [ 4.776042] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 07:30:48.904698 [ 4.793560] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Jun 30 07:30:48.916746 [ 4.807271] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Jun 30 07:30:48.932781 [ 4.818742] phy phy-12130000.phy.3: phy_power_on was called before phy_init Jun 30 07:30:48.944807 [ 4.825004] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 07:30:48.944841 [ 4.829292] exynos-ohci 12120000.usb: USB Host Controller Jun 30 07:30:48.956718 [ 4.829319] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Jun 30 07:30:48.956756 [ 4.847657] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Jun 30 07:30:48.968736 [ 4.855479] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 07:30:48.980606 [ 4.874156] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 07:30:49.004660 [ 4.881027] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 07:30:49.004832 [ 4.888192] usb usb1: Product: EHCI Host Controller Jun 30 07:30:49.016803 [ 4.893057] usb usb1: Manufacturer: Linux 6.1.0-18-armmp ehci_hcd Jun 30 07:30:49.016872 [ 4.899123] usb usb1: SerialNumber: 12110000.usb Jun 30 07:30:49.016919 [ 4.910006] hub 1-0:1.0: USB hub found Jun 30 07:30:49.028627 [ 4.917825] hub 1-0:1.0: 3 ports detected Jun 30 07:30:49.040623 [ 4.925041] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Jun 30 07:30:49.052666 [ 4.931876] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 07:30:49.052666 [ 4.939059] usb usb2: Product: USB Host Controller Jun 30 07:30:49.064677 [ 4.939162] VDD_ALIVE_1.0V: Bringing 1000000uV into 1100000-1100000uV Jun 30 07:30:49.064677 [ 4.943830] usb usb2: Manufacturer: Linux 6.1.0-18-armmp ohci_hcd Jun 30 07:30:49.076656 [ 4.943837] usb usb2: SerialNumber: 12120000.usb Jun 30 07:30:49.076656 [ 4.997331] usb3503 usb-hub: switched to HUB mode Jun 30 07:30:49.112614 [ 5.000575] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 07:30:49.124735 [ 5.004891] hub 2-0:1.0: USB hub found Jun 30 07:30:49.124735 [ 5.019757] hub 2-0:1.0: 3 ports detected Jun 30 07:30:49.136513 [ 5.321188] usb 1-3: new high-speed USB device number 2 using exynos-ehci Jun 30 07:30:49.448540 [ 5.340466] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 07:30:49.460829 [ 5.344563] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 07:30:49.472790 [ 5.352673] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 Jun 30 07:30:49.484647 [ 5.361580] xhci-hcd xhci-hcd.2.auto: irq 108, io mem 0x12000000 Jun 30 07:30:49.484647 [ 5.367705] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 07:30:49.496644 [ 5.372985] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 07:30:49.496644 [ 5.380619] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 07:30:49.508645 [ 5.387284] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 07:30:49.508645 [ 5.395376] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 07:30:49.520723 [ 5.402590] usb usb3: Product: xHCI Host Controller Jun 30 07:30:49.520723 [ 5.407438] usb usb3: Manufacturer: Linux 6.1.0-18-armmp xhci-hcd Jun 30 07:30:49.532633 [ 5.413514] usb usb3: SerialNumber: xhci-hcd.2.auto Jun 30 07:30:49.532633 [ 5.422322] hub 3-0:1.0: USB hub found Jun 30 07:30:49.544611 [ 5.424634] hub 3-0:1.0: 1 port detected Jun 30 07:30:49.544611 [ 5.429028] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 07:30:49.556643 [ 5.436751] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Jun 30 07:30:49.568650 [ 5.444849] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 07:30:49.568650 [ 5.452061] usb usb4: Product: xHCI Host Controller Jun 30 07:30:49.580635 [ 5.456918] usb usb4: Manufacturer: Linux 6.1.0-18-armmp xhci-hcd Jun 30 07:30:49.580635 [ 5.462986] usb usb4: SerialNumber: xhci-hcd.2.auto Jun 30 07:30:49.580635 [ 5.468564] hub 4-0:1.0: USB hub found Jun 30 07:30:49.592608 [ 5.471632] hub 4-0:1.0: 1 port detected Jun 30 07:30:49.592608 [ 5.493536] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Jun 30 07:30:49.616649 [ 5.500291] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jun 30 07:30:49.628623 [ 5.510574] hub 1-3:1.0: USB hub found Jun 30 07:30:49.628623 [ 5.513029] hub 1-3:1.0: 3 ports detected Jun 30 07:30:49.640564 Starting system log daemon: syslogd, klogd. Jun 30 07:30:49.772575 /var/run/utmp: No such file or directory Jun 30 07:30:51.624570 [?1h=(B   Jun 30 07:30:51.672586  Jun 30 07:30:51.684691 [  (-*) ][ Jan 02  0:00 ] Jun 30 07:30:51.696569 [  (0*start) ][ Jan 02  0:00 ] Jun 30 07:30:51.708674 [  (0*start) ][ Jan 02  0:00 ] Jun 30 07:30:51.720601 [  (0*start) ][ Jan 02  0:00 ] Jun 30 07:30:51.732610 [  (0*start) ][ Jan 02  0:00 ]                        [  (0*start) ][ Jan 02  0:00 ][  (0*start) ][ Jan 02  0:00 ] Jun 30 07:30:51.792582 [ 0- start  (2*shell) ][ Jan 02  0:00 ] Jun 30 07:30:51.804602 [ 0- start  (2*shell) ][ Jan 02  0:00 ] Jun 30 07:30:51.816528 [ 0- start  (2*shell) ][ Jan 02  0:00 ] Jun 30 07:30:51.828608 [ 0- start  (2*shell) ][ Jan 02  0:00 ]                        [ 0- start  (2*shell) ][ Jan 02  0:00 ][ 0- start  (2*shell) ][ Jan 02  0:00 ] Jun 30 07:30:51.888556 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:00 ] Jun 30 07:30:51.900591 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:00 ] Jun 30 07:30:51.912586 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:00 ] Jun 30 07:30:51.924634 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:00 ]                        [ 0 start 2- shell  (3*shell) ][ Jan 02  0:00 ][ 0 start 2- shell  (3*shell) ][ Jan 02  0:00 ] Jun 30 07:30:51.984643 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:00 ] Jun 30 07:30:51.996641 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:00 ] Jun 30 07:30:52.008616 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:00 ] Jun 30 07:30:52.020632 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:00 ]                        [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:00 ][ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:00 ] Jun 30 07:30:52.080589 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Jun 30 07:30:52.092645 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Jun 30 07:30:52.104650 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Jun 30 07:30:52.116635 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:00 ]                        [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:00 ][ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Jun 30 07:30:52.176588 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Jun 30 07:30:52.188645 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Jun 30 07:30:52.200574 [  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Jun 30 07:30:52.665593 Detecting network hardware [  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:01 ]... 2%... 95%... 100% Jun 30 07:30:54.393726 Detecting link on eth0; please wait... ... 0%... 10%... 20% Jun 30 07:30:59.289720 Waiting for link-local address... ... 8%... 16%... 25%... 33%... 41%... 50%... 100% Jun 30 07:31:00.837678 Attempting IPv6 autoconfiguration... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 75%... 83%... 91%... 100% Jun 30 07:31:06.909676 Configuring the network with DHCP ... 0%... 100% Jun 30 07:31:10.077595 Checking the Debian archive mirror ... 25%... 50%... 75%... 100% Jun 30 07:31:18.357723 Loading additional components ... 0%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Jun 30 07:31:52.469775 [  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:02 ] Setting up the clock ... 0%... 3%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  7:31 ]... 100% Jun 30 07:31:55.294682 Loading additional components ... 50%... 100% Jun 30 07:31:56.969787 Detecting disks and all other hardware [  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  7:32 ]... 2%... 95%... 100% Jun 30 07:32:01.049750 Loading additional components ... 5%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Jun 30 07:32:09.932492 Loading additional components ... 25%... 50%... 75%... 100% Jun 30 07:32:12.332536 Starting up the partitioner ... 4%... 13%... 21%... 30%... 43%... 52%... 60%... 73%... 82%... 91%... 100% Jun 30 07:32:26.829745 Guided partitioning ... 16%... 33%... 50%... 66%... 83%... 100% Jun 30 07:32:35.477714 Starting up the partitioner ... 4%... 12%... 20%... 32%... 40%... 52%... 60%... 72%... 80%... 92%... 100% Jun 30 07:32:45.517738 Partitions formatting ... 33% Jun 30 07:32:54.209726 Partitions formatting [  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  7:33 ] Partitions formatting Installing the base system ... 0%... 17%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  7:34 ]... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  7:35 ]... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  7:36 ]... 48%... 50%...  Jun 30 07:36:54.500547  60%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  7:37 ]... 70%... 79%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  7:38 ]... 83%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  7:39 ][  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  7:40 ]... 91%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  7:41 ]... 100% Jun 30 07:41:23.249768 Configuring apt ... 7%... 14%... 14%... 21%... 35%... 42%... 50%... 61%... 70%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  7:42 ]. Jun 30 07:42:00.893738 ... 82%... 92%... 100% Jun 30 07:42:03.569725 Select and install software ... 1%... 10%... 13%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  7:43 ]... 20%... 30%... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  7:44 ]... 50%... Jun 30 07:44:52.117683 . 60%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  7:45 ]... 70%... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  7:46 ]... 88%... 90%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  7:47 ]... 94%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  7:48 ]... 100% Jun 30 07:48:14.713763 Finishing the installation ... 4%... 12%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  7:49 ][  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  7:50 ]... 16%... 20%... 32%... 40%... 44%... Jun 30 07:50:02.420800  52%... 60%... 72%... 80%... 92% The system is going down NOW! Sent SIGKILL to all processes Jun 30 07:50:14.096829 Requesting system reboot Jun 30 07:50:14.096928 [ 1171.011707] reboot: Reó Jun 30 07:50:15.452606 Jun 30 07:50:15.452606 Jun 30 07:50:15.452606 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 07:50:15.452606 Jun 30 07:50:15.464640 CPU: Exynos5250@1000MHz Jun 30 07:50:15.464640 Jun 30 07:50:15.464640 Board: Arndale Jun 30 07:50:15.464640 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 07:50:15.464640 ready Jun 30 07:50:15.464640 DRAM: 2 GiB Jun 30 07:50:15.464640 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 07:50:15.488593 trace: enabled Jun 30 07:50:15.524583 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 07:50:15.888542 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 07:50:15.936614 In: serial Jun 30 07:50:15.936614 Out: serial Jun 30 07:50:15.948626 Err: serial Jun 30 07:50:15.948626 SCSI: ARNDALE SCSI INIT Jun 30 07:50:15.948626 Target spinup took 0 ms. Jun 30 07:50:15.948626 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 07:50:15.960643 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 07:50:15.960643 Net: Net Initialization Skipped Jun 30 07:50:15.960643 No ethernet found. Jun 30 07:50:15.972608 Hostname: arndale-metrocentre Jun 30 07:50:15.972608 Hit any key to stop autoboot: 2  1  0 Jun 30 07:50:17.888545 (Re)start USB... Jun 30 07:50:17.888545 USB0: USB EHCI 1.00 Jun 30 07:50:17.900548 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 07:50:23.489823 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 07:50:23.501774 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 07:50:23.945692 Waiting for Ethernet connection... done. Jun 30 07:50:25.589798 BOOTP broadcast 1 Jun 30 07:50:25.589877 BOOTP broadcast 2 Jun 30 07:50:27.741673 DHCP client bound to address 10.149.64.44 (2232 ms) Jun 30 07:50:27.741673 Using asx0 device Jun 30 07:50:27.741673 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 07:50:27.753618 Filename 'pxelinux.0'. Jun 30 07:50:27.753618 Load address: 0x43e00000 Jun 30 07:50:27.753618 Loading: *### Jun 30 07:50:27.765559 2.4 MiB/s Jun 30 07:50:27.765559 done Jun 30 07:50:27.765559 Bytes transferred = 42430 (a5be hex) Jun 30 07:50:27.777606 missing environment variable: pxeuuid Jun 30 07:50:27.777606 Retrieving file: pxelinux.cfg/0A95402C Jun 30 07:50:27.777606 Using asx0 device Jun 30 07:50:27.777606 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 07:50:27.789593 Filename 'pxelinux.cfg/0A95402C'. Jun 30 07:50:27.789593 Load address: 0x51000000 Jun 30 07:50:27.789593 Loading: *# Jun 30 07:50:27.789593 31.3 KiB/s Jun 30 07:50:27.789593 done Jun 30 07:50:27.801679 Bytes transferred = 65 (41 hex) Jun 30 07:50:27.801679 Config file found Jun 30 07:50:27.801679 Ignoring unknown command: serial Jun 30 07:50:27.801679 1: local Jun 30 07:50:27.801679 scanning bus for devices... Jun 30 07:50:27.801679 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 07:50:27.837666 Type: Hard Disk Jun 30 07:50:27.837666 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 07:50:27.837666 Found 1 device(s). Jun 30 07:50:27.849677 Jun 30 07:50:27.849677 SCSI device 0: Jun 30 07:50:27.849677 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 07:50:27.849677 Type: Hard Disk Jun 30 07:50:27.849677 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 07:50:27.861622 ... is now current device Jun 30 07:50:27.861622 Scanning scsi 0... Jun 30 07:50:27.861622 Found U-Boot script /boot.scr Jun 30 07:50:27.981610 641 bytes read in 39 ms (15.6 KiB/s) Jun 30 07:50:28.017601 ## Executing script at 50000000 Jun 30 07:50:28.029617 Loading dtbs/exynos5250-arndale.dtb Jun 30 07:50:28.029617 46686 bytes read in 1861 ms (24.4 KiB/s) Jun 30 07:50:29.841630 Loading vmlinuz-6.1.0-22-armmp-lpae Jun 30 07:50:29.841630 5505536 bytes read in 190 ms (27.6 MiB/s) Jun 30 07:50:30.045632 Loading initrd.img-6.1.0-22-armmp-lpae Jun 30 07:50:30.045632 25721017 bytes read in 1905 ms (12.9 MiB/s) Jun 30 07:50:31.905832 Booting Jun 30 07:50:31.905907 Kernel image @ 0x42000000 [ 0x000000 - 0x540200 ] Jun 30 07:50:31.905954 ## Flattened Device Tree blob at 43000000 Jun 30 07:50:31.917765 Booting using the fdt blob at 0x43000000 Jun 30 07:50:31.917823 Loading Ramdisk to 4e778000, end 4ffff8b9 ... OK Jun 30 07:50:32.337700 Loading Device Tree to 4e769000, end 4e77765d ... OK Jun 30 07:50:32.337763 Jun 30 07:50:32.337801 Starting kernel ...(fake run for tracing) Jun 30 07:50:32.349723 Jun 30 07:50:32.349774 Jun 30 07:50:32.349812 Starting kernel ... Jun 30 07:50:32.349853 Jun 30 07:50:32.349890 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 07:50:38.493836 [ 0.000000] Linux version 6.1.0-22-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.94-1 (2024-06-21) Jun 30 07:50:38.505771 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=30c5387d Jun 30 07:50:38.517755 [ 0.000000] CPU: div instructions available: patching division code Jun 30 07:50:38.529747 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 07:50:38.529813 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 07:50:38.541764 [ 0.000000] Memory policy: Data cache writealloc Jun 30 07:50:38.541823 [ 0.000000] efi: UEFI not found. Jun 30 07:50:38.541868 [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000 Jun 30 07:50:38.553763 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 07:50:38.553822 [ 0.000000] Zone ranges: Jun 30 07:50:38.553866 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Jun 30 07:50:38.565762 [ 0.000000] Normal empty Jun 30 07:50:38.565820 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Jun 30 07:50:38.577747 [ 0.000000] Movable zone start for each node Jun 30 07:50:38.577807 [ 0.000000] Early memory node ranges Jun 30 07:50:38.577853 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 07:50:38.589754 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 07:50:38.589818 [ 0.000000] percpu: Embedded 18 pages/cpu s44756 r8192 d20780 u73728 Jun 30 07:50:38.601755 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Jun 30 07:50:38.601858 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=ttySAC2,115200n8 Jun 30 07:50:38.613777 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Jun 30 07:50:38.625753 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 07:50:38.637750 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Jun 30 07:50:38.637813 [ 0.000000] Memory: 2015520K/2097152K available (12288K kernel code, 1714K rwdata, 3748K rodata, 2048K init, 382K bss, 65248K reserved, 16384K cma-reserved, 1294332K highmem) Jun 30 07:50:38.661750 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 07:50:38.661815 [ 0.000000] ftrace: allocating 39982 entries in 118 pages Jun 30 07:50:38.673754 [ 0.000000] ftrace: allocated 118 pages with 5 groups Jun 30 07:50:38.673816 [ 0.000000] trace event string verifier disabled Jun 30 07:50:38.673862 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 07:50:38.685753 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Jun 30 07:50:38.685818 [ 0.000000] Rude variant of Tasks RCU enabled. Jun 30 07:50:38.697753 [ 0.000000] Tracing variant of Tasks RCU enabled. Jun 30 07:50:38.697813 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Jun 30 07:50:38.709737 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 07:50:38.709801 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 07:50:38.721765 [ 0.000000] GIC: Using split EOI/Deactivate mode Jun 30 07:50:38.721826 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 07:50:38.733750 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 07:50:38.733812 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Jun 30 07:50:38.745756 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Jun 30 07:50:38.745827 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Jun 30 07:50:38.757788 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Jun 30 07:50:38.769750 [ 0.002632] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Jun 30 07:50:38.769812 [ 0.002646] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 07:50:38.781782 [ 0.002661] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 07:50:38.793764 [ 0.002672] Ignoring duplicate/late registration of read_current_timer delay Jun 30 07:50:38.793828 [ 0.003039] Console: colour dummy device 80x30 Jun 30 07:50:38.805751 [ 0.003079] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Jun 30 07:50:38.817752 [ 0.003092] CPU: Testing write buffer coherency: ok Jun 30 07:50:38.817813 [ 0.003134] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 07:50:38.829758 [ 0.003142] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 07:50:38.829820 [ 0.003149] pid_max: default: 32768 minimum: 301 Jun 30 07:50:38.841740 [ 0.003505] LSM: Security Framework initializing Jun 30 07:50:38.841800 [ 0.003576] landlock: Up and running. Jun 30 07:50:38.841845 [ 0.003580] Yama: disabled by default; enable with sysctl kernel.yama.* Jun 30 07:50:38.853779 [ 0.003762] AppArmor: AppArmor initialized Jun 30 07:50:38.853837 [ 0.003774] TOMOYO Linux initialized Jun 30 07:50:38.865768 [ 0.003819] LSM support for eBPF active Jun 30 07:50:38.865827 [ 0.004063] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 07:50:38.865882 [ 0.004077] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 07:50:38.877790 [ 0.005476] /cpus/cpu@0 missing clock-frequency property Jun 30 07:50:38.889795 [ 0.005504] /cpus/cpu@1 missing clock-frequency property Jun 30 07:50:38.889858 [ 0.005517] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 07:50:38.889907 [ 0.006455] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 07:50:38.901794 [ 0.006462] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 07:50:38.913751 [ 0.006564] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 07:50:38.913819 [ 0.006569] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 07:50:38.925735 [ 0.006708] Setting up static identity map for 0x40400000 - 0x404000ac Jun 30 07:50:38.925735 [ 0.007868] rcu: Hierarchical SRCU implementation. Jun 30 07:50:38.937751 [ 0.007874] rcu: Max phase no-delay instances is 1000. Jun 30 07:50:38.937818 [ 0.009996] EFI services will not be available. Jun 30 07:50:38.937865 [ 0.010339] smp: Bringing up secondary CPUs ... Jun 30 07:50:38.949742 [ 0.011075] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 07:50:38.949804 [ 0.011087] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 07:50:38.961718 [ 0.011230] smp: Brought up 1 node, 2 CPUs Jun 30 07:50:38.961718 [ 0.011239] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 07:50:38.973785 [ 0.011246] CPU: All CPU(s) started in HYP mode. Jun 30 07:50:38.973850 [ 0.011250] CPU: Virtualization extensions available. Jun 30 07:50:38.985769 [ 0.012115] devtmpfs: initialized Jun 30 07:50:38.985826 [ 0.022963] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 07:50:38.997757 [ 0.023198] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Jun 30 07:50:38.997828 [ 0.023222] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 07:50:39.009780 [ 0.023746] pinctrl core: initialized pinctrl subsystem Jun 30 07:50:39.009841 [ 0.024491] DMI not present or invalid. Jun 30 07:50:39.021753 [ 0.025167] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 07:50:39.021815 [ 0.026714] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 07:50:39.033742 [ 0.028206] audit: initializing netlink subsys (disabled) Jun 30 07:50:39.033804 [ 0.028408] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 Jun 30 07:50:39.045760 [ 0.029587] thermal_sys: Registered thermal governor 'fair_share' Jun 30 07:50:39.045794 [ 0.029595] thermal_sys: Registered thermal governor 'bang_bang' Jun 30 07:50:39.057753 [ 0.029599] thermal_sys: Registered thermal governor 'step_wise' Jun 30 07:50:39.057815 [ 0.029604] thermal_sys: Registered thermal governor 'user_space' Jun 30 07:50:39.069789 [ 0.029608] thermal_sys: Registered thermal governor 'power_allocator' Jun 30 07:50:39.069852 [ 0.029804] No ATAGs? Jun 30 07:50:39.081746 [ 0.029872] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jun 30 07:50:39.081815 [ 0.029880] hw-breakpoint: maximum watchpoint size is 8 bytes. Jun 30 07:50:39.093766 [ 0.030966] Serial: AMBA PL011 UART driver Jun 30 07:50:39.093825 [ 0.080461] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 30 07:50:39.105764 [ 0.087347] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Jun 30 07:50:39.117751 [ 0.091773] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages Jun 30 07:50:39.117822 [ 0.091782] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page Jun 30 07:50:39.129739 [ 0.098612] iommu: Default domain type: Translated Jun 30 07:50:39.129801 [ 0.098621] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 07:50:39.141680 [ 0.099590] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Jun 30 07:50:39.141680 [ 0.100122] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 07:50:39.141680 [ 0.100135] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 07:50:39.153761 [ 0.100767] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 07:50:39.165772 [ 0.100797] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 07:50:39.165843 [ 0.101000] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 07:50:39.177741 [ 0.101358] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 07:50:39.177801 [ 0.101368] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 07:50:39.189744 [ 0.101744] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 07:50:39.189805 [ 0.102037] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 07:50:39.201748 [ 0.102047] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 07:50:39.201810 [ 0.102339] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 07:50:39.201858 [ 0.102457] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 07:50:39.213760 [ 0.102466] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 07:50:39.213822 [ 0.102646] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 07:50:39.225750 [ 0.102860] pps_core: LinuxPPS API ver. 1 registered Jun 30 07:50:39.225811 [ 0.102865] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 07:50:39.237729 [ 0.102881] PTP clock support registered Jun 30 07:50:39.237787 [ 0.104410] NetLabel: Initializing Jun 30 07:50:39.249755 [ 0.104416] NetLabel: domain hash size = 128 Jun 30 07:50:39.249815 [ 0.104421] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Jun 30 07:50:39.249865 [ 0.104476] NetLabel: unlabeled traffic allowed by default Jun 30 07:50:39.261758 [ 0.104648] vgaarb: loaded Jun 30 07:50:39.261814 [ 0.105132] clocksource: Switched to clocksource mct-frc Jun 30 07:50:39.273770 [ 0.105711] VFS: Disk quotas dquot_6.6.0 Jun 30 07:50:39.273829 [ 0.105796] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jun 30 07:50:39.273881 [ 0.106555] AppArmor: AppArmor Filesystem Enabled Jun 30 07:50:39.285750 [ 0.116593] NET: Registered PF_INET protocol family Jun 30 07:50:39.285811 [ 0.116785] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Jun 30 07:50:39.297765 [ 0.118260] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 07:50:39.309652 [ 0.118362] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 07:50:39.309690 [ 0.118389] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Jun 30 07:50:39.321641 [ 0.118488] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Jun 30 07:50:39.321676 [ 0.118718] TCP: Hash tables configured (established 8192 bind 8192) Jun 30 07:50:39.333599 [ 0.118955] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Jun 30 07:50:39.345609 [ 0.119048] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 07:50:39.345609 [ 0.119089] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 07:50:39.357515 [ 0.119301] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 07:50:39.357515 [ 0.119340] NET: Registered PF_XDP protocol family Jun 30 07:50:39.369515 [ 0.119351] PCI: CLS 0 bytes, default 64 Jun 30 07:50:39.369515 [ 0.119839] Trying to unpack rootfs image as initramfs... Jun 30 07:50:39.369515 [ 0.120197] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Jun 30 07:50:39.381515 [ 0.125603] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Jun 30 07:50:39.393520 [ 0.189936] Initialise system trusted keyrings Jun 30 07:50:39.393520 [ 0.190029] Key type blacklist registered Jun 30 07:50:39.393520 [ 0.191231] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Jun 30 07:50:39.405513 [ 0.199111] zbud: loaded Jun 30 07:50:39.405513 [ 0.201380] integrity: Platform Keyring initialized Jun 30 07:50:39.417518 [ 0.201413] integrity: Machine keyring initialized Jun 30 07:50:39.417518 [ 0.201423] Key type asymmetric registered Jun 30 07:50:39.417518 [ 0.201431] Asymmetric key parser 'x509' registered Jun 30 07:50:39.429510 [ 1.422462] Freeing initrd memory: 25120K Jun 30 07:50:39.429510 [ 1.444515] alg: self-tests for CTR-KDF (hmac(sha256)) passed Jun 30 07:50:39.429510 [ 1.444778] bounce: pool size: 64 pages Jun 30 07:50:39.441768 [ 1.444955] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Jun 30 07:50:39.441846 [ 1.445118] io scheduler mq-deadline registered Jun 30 07:50:39.453711 [ 1.450307] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Jun 30 07:50:39.469952 [ 1.471325] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 07:50:39.469991 [ 1.471337] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 07:50:39.481660 [ 1.473718] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 07:50:39.481660 [ 1.473729] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 07:50:39.493703 [ 1.474541] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 07:50:39.501650 [ 1.474550] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 07:50:39.513758 [ 1.475367] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 07:50:39.513831 [ 1.475375] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 07:50:39.525762 [ 1.477737] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 07:50:39.537757 [ 1.480522] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 07:50:39.537819 [ 1.483279] Serial: AMBA driver Jun 30 07:50:39.549722 [ 1.483501] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 07:50:39.549793 [ 1.483977] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 07:50:39.561707 [ 1.484444] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 07:50:39.573764 [ 2.565257] printk: console [ttySAC2] enabled Jun 30 07:50:39.573823 [ 2.570095] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Jun 30 07:50:39.585739 [ 2.580723] STM32 USART driver initialized Jun 30 07:50:39.585797 [ 2.595112] mousedev: PS/2 mouse device common for all mice Jun 30 07:50:39.609698 [ 2.631846] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 07:50:39.645724 [ 2.640475] s5m-rtc s5m-rtc: setting system clock to 2024-06-30T07:50:40 UTC (1719733840) Jun 30 07:50:39.657732 [ 2.650333] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Jun 30 07:50:39.657794 [ 2.657825] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 07:50:39.669748 [ 2.665821] NET: Registered PF_INET6 protocol family Jun 30 07:50:39.681678 [ 2.689889] Segment Routing with IPv6 Jun 30 07:50:39.693643 [ 2.692134] In-situ OAM (IOAM) with IPv6 Jun 30 07:50:39.705781 [ 2.696125] mip6: Mobile IPv6 Jun 30 07:50:39.705842 [ 2.698979] NET: Registered PF_PACKET protocol family Jun 30 07:50:39.705891 [ 2.704139] mpls_gso: MPLS GSO support Jun 30 07:50:39.717783 [ 2.708147] ThumbEE CPU extension supported. Jun 30 07:50:39.717843 [ 2.712017] Registering SWP/SWPB emulation handler Jun 30 07:50:39.717890 [ 2.717274] registered taskstats version 1 Jun 30 07:50:39.729729 [ 2.720842] Loading compiled-in X.509 certificates Jun 30 07:50:39.729790 [ 3.181554] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Jun 30 07:50:40.197770 [ 3.188871] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Jun 30 07:50:40.209849 [ 3.199968] zswap: loaded using pool lzo/zbud Jun 30 07:50:40.209912 [ 3.203882] Key type .fscrypt registered Jun 30 07:50:40.209954 [ 3.207205] Key type fscrypt-provisioning registered Jun 30 07:50:40.221696 [ 3.231430] Key type encrypted registered Jun 30 07:50:40.245754 [ 3.234025] AppArmor: AppArmor sha1 policy hashing enabled Jun 30 07:50:40.245816 [ 3.239480] ima: No TPM chip found, activating TPM-bypass! Jun 30 07:50:40.245866 [ 3.244944] ima: Allocated hash algorithm: sha256 Jun 30 07:50:40.257750 [ 3.249672] ima: No architecture policies found Jun 30 07:50:40.257810 [ 3.254204] evm: Initialising EVM extended attributes: Jun 30 07:50:40.269748 [ 3.259251] evm: security.selinux Jun 30 07:50:40.269805 [ 3.262543] evm: security.SMACK64 (disabled) Jun 30 07:50:40.269852 [ 3.266790] evm: security.SMACK64EXEC (disabled) Jun 30 07:50:40.281749 [ 3.271394] evm: security.SMACK64TRANSMUTE (disabled) Jun 30 07:50:40.281810 [ 3.276429] evm: security.SMACK64MMAP (disabled) Jun 30 07:50:40.281856 [ 3.281025] evm: security.apparmor Jun 30 07:50:40.293728 [ 3.284414] evm: security.ima Jun 30 07:50:40.293728 [ 3.287361] evm: security.capability Jun 30 07:50:40.293728 [ 3.290929] evm: HMAC attrs: 0x1 Jun 30 07:50:40.305679 [ 3.879983] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 07:50:40.893747 [ 3.885941] clk: Disabling unused clocks Jun 30 07:50:40.893819 [ 3.898889] Freeing unused kernel image (initmem) memory: 2048K Jun 30 07:50:40.905734 [ 3.903755] Checked W+X mappings: passed, no W+X pages found Jun 30 07:50:40.917732 [ 3.909005] Run /init as init process Jun 30 07:50:40.917790 Loading, please wait... Jun 30 07:50:40.953688 Starting systemd-udevd version 252.26-1~deb12u2 Jun 30 07:50:41.025713 [ 4.850298] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 07:50:41.865845 [ 4.858507] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 07:50:41.943799 [ 4.874016] usbcore: registered new interface driver usbfs Jun 30 07:50:41.943875 [ 4.878159] usbcore: registered new interface driver hub Jun 30 07:50:41.943903 [ 4.895968] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 07:50:41.943934 [ 4.896423] usbcore: registered new device driver usb Jun 30 07:50:41.943959 [ 4.939337] Synopsys Designware Multimedia Card Interface Driver Jun 30 07:50:41.949586 [ 4.946829] phy phy-12130000.phy.4: phy_power_on was called before phy_init Jun 30 07:50:41.961548 [ 4.962410] phy phy-12130000.phy.4: phy_power_on was called before phy_init Jun 30 07:50:41.973608 [ 4.979519] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 30 07:50:41.985732 [ 4.983508] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 07:50:41.997652 [ 4.985506] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 30 07:50:42.009638 [ 4.990496] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Jun 30 07:50:42.009676 [ 5.007715] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 07:50:42.021594 [ 5.024327] exynos-ohci 12120000.usb: USB Host Controller Jun 30 07:50:42.033715 [ 5.039147] SCSI subsystem initialized Jun 30 07:50:42.045711 [ 5.045333] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 30 07:50:42.057757 [ 5.050359] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 30 07:50:42.057819 [ 5.054909] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Jun 30 07:50:42.069770 [ 5.063591] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 30 07:50:42.081747 [ 5.068376] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo Jun 30 07:50:42.081821 [ 5.069809] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 30 07:50:42.093743 [ 5.079859] mmc_host mmc0: card is polling. Jun 30 07:50:42.093803 [ 5.095614] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Jun 30 07:50:42.105781 [ 5.100533] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Jun 30 07:50:42.117637 [ 5.128860] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 109,32 bit host data width,128 deep fifo Jun 30 07:50:42.141748 [ 5.156797] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 07:50:42.165759 [ 5.164893] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 07:50:42.177744 [ 5.172337] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 07:50:42.189751 [ 5.175763] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Jun 30 07:50:42.189819 [ 5.188635] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 07:50:42.201747 [ 5.195874] usb usb2: Product: USB Host Controller Jun 30 07:50:42.201807 [ 5.200598] usb usb2: Manufacturer: Linux 6.1.0-22-armmp-lpae ohci_hcd Jun 30 07:50:42.213720 [ 5.207105] usb usb2: SerialNumber: 12120000.usb Jun 30 07:50:42.213720 [ 5.215957] hub 2-0:1.0: USB hub found Jun 30 07:50:42.225762 [ 5.218339] hub 2-0:1.0: 3 ports detected Jun 30 07:50:42.225825 [ 5.225161] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 07:50:42.237758 [ 5.232036] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 07:50:42.249767 [ 5.239201] usb usb1: Product: EHCI Host Controller Jun 30 07:50:42.249827 [ 5.244054] usb usb1: Manufacturer: Linux 6.1.0-22-armmp-lpae ehci_hcd Jun 30 07:50:42.261709 [ 5.250568] usb usb1: SerialNumber: 12110000.usb Jun 30 07:50:42.261769 [ 5.266675] hub 1-0:1.0: USB hub found Jun 30 07:50:42.273717 [ 5.269033] hub 1-0:1.0: 3 ports detected Jun 30 07:50:42.273775 [ 5.286449] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 30 07:50:42.297753 [ 5.300048] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 30 07:50:42.309768 [ 5.306255] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 30 07:50:42.321755 [ 5.313513] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 07:50:42.333748 [ 5.319452] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 30 07:50:42.333814 [ 5.330281] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Jun 30 07:50:42.345780 [ 5.339063] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 30 07:50:42.357723 [ 5.355235] mmc1: new high speed SDHC card at address aaaa Jun 30 07:50:42.369749 [ 5.356412] scsi host0: ahci-dwc Jun 30 07:50:42.369806 [ 5.363162] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 110 Jun 30 07:50:42.381725 [ 5.378023] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Jun 30 07:50:42.381784 [ 5.384117] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 30 07:50:42.393758 [ 5.392795] mmc0: new DDR MMC card at address 0001 Jun 30 07:50:42.405724 [ 5.398436] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Jun 30 07:50:42.405783 [ 5.407812] mmcblk0: p1 p2 p3 p4 Jun 30 07:50:42.417723 [ 5.411373] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Jun 30 07:50:42.417783 [ 5.418055] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Jun 30 07:50:42.429725 [ 5.425347] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (241:0) Jun 30 07:50:42.441681 [ 5.786833] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 07:50:42.801735 [ 5.849216] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 30 07:50:42.861783 [ 5.854792] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 30 07:50:42.861847 [ 5.860633] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 30 07:50:42.873761 [ 5.868087] ata1.00: configured for UDMA/133 Jun 30 07:50:42.873841 [ 5.871849] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 30 07:50:42.885762 [ 5.875575] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 07:50:42.897708 [ 5.933409] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 07:50:42.945762 [ 5.937497] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 07:50:42.957734 [ 5.948974] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Jun 30 07:50:42.957808 [ 5.956984] xhci-hcd xhci-hcd.2.auto: irq 111, io mem 0x12000000 Jun 30 07:50:42.969773 [ 5.963207] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 07:50:42.969834 [ 5.968383] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 07:50:42.981795 [ 5.976056] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 07:50:42.993724 [ 5.982736] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 07:50:42.993794 [ 5.990787] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 07:50:43.005766 [ 5.997978] usb usb3: Product: xHCI Host Controller Jun 30 07:50:43.005826 [ 6.002825] usb usb3: Manufacturer: Linux 6.1.0-22-armmp-lpae xhci-hcd Jun 30 07:50:43.017751 [ 6.009334] usb usb3: SerialNumber: xhci-hcd.2.auto Jun 30 07:50:43.017811 [ 6.014420] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 07:50:43.029758 [ 6.024137] hub 3-0:1.0: USB hub found Jun 30 07:50:43.029815 [ 6.027389] hub 3-0:1.0: 1 port detected Jun 30 07:50:43.041769 [ 6.032925] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 07:50:43.041838 [ 6.039745] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Jun 30 07:50:43.053833 [ 6.047870] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 07:50:43.065759 [ 6.055078] usb usb4: Product: xHCI Host Controller Jun 30 07:50:43.065819 [ 6.059908] usb usb4: Manufacturer: Linux 6.1.0-22-armmp-lpae xhci-hcd Jun 30 07:50:43.077736 [ 6.066417] usb usb4: SerialNumber: xhci-hcd.2.auto Jun 30 07:50:43.077797 [ 6.072101] hub 4-0:1.0: USB hub found Jun 30 07:50:43.077842 [ 6.075075] hub 4-0:1.0: 1 port detected Jun 30 07:50:43.089693 [ 6.105258] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 30 07:50:43.113769 [ 6.111405] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 30 07:50:43.125740 [ 6.116589] sd 0:0:0:0: [sda] Write Protect is off Jun 30 07:50:43.125800 [ 6.124763] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 07:50:43.137682 [ 6.132807] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 30 07:50:43.149788 [ 6.142696] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 30 07:50:43.149851 [ 6.164055] sda: sda1 sda2 < sda5 > Jun 30 07:50:43.173725 [ 6.168571] sd 0:0:0:0: [sda] Attached SCSI disk Jun 30 07:50:43.173784 [ 6.232845] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 07:50:43.245695 [ 6.340926] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 07:50:43.353737 [ 6.504447] I/O error, dev mmcblk1, sector 7743713 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 2 Jun 30 07:50:43.521703 [ 6.612438] I/O error, dev mmcblk1, sector 7743714 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 2 Jun 30 07:50:43.629717 [ 6.905161] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 07:50:43.917747 [ 6.978516] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 07:50:43.989759 [ 7.092658] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 07:50:44.109739 [ 7.200248] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 07:50:44.217704 [ 7.217157] random: crng init done Jun 30 07:50:44.229692 [ 7.307878] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 07:50:44.325696 [ 7.332802] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. Jun 30 07:50:44.349771 [ 7.343633] device-mapper: uevent: version 1.0.3 Jun 30 07:50:44.349830 [ 7.348350] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Jun 30 07:50:44.361737 [ 7.415555] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 07:50:44.433650 [ 7.423110] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 07:50:44.433688 Begin: Loading essential drivers ... done. Jun 30 07:50:45.093701 Begin: Running /scripts/init-premount ... done. Jun 30 07:50:48.097777 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 30 07:50:48.109741 Begin: Running /scripts/local-premount ... done. Jun 30 07:50:48.169705 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 30 07:50:48.229725 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 30 07:50:48.349681 /dev/mapper/arndale--metrocentre--vg-root: clean, 39331/1220608 files, 377975/4882432 blocks Jun 30 07:50:48.601727 done. Jun 30 07:50:48.625649 [ 12.246456] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 30 07:50:49.261715 [ 12.483280] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. Jun 30 07:50:49.501715 done. Jun 30 07:50:49.501768 Begin: Running /scripts/local-bottom ... done. Jun 30 07:50:49.537737 Begin: Running /scripts/init-bottom ... done. Jun 30 07:50:49.573686 [ 12.790396] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. Jun 30 07:50:49.801761 INIT: version 3.06 booting Jun 30 07:50:50.137682 INIT: No inittab.d directory found Jun 30 07:50:50.233665 Using makefile-style concurrent boot in runlevel S. Jun 30 07:50:50.617709 Starting hotplug events dispatcher: systemd-udevd. Jun 30 07:50:52.405734 Synthesizing the initial hotplug events (subsystems)...done. Jun 30 07:50:52.645702 Synthesizing the initial hotplug events (devices)...done. Jun 30 07:50:53.185706 Waiting for /dev to be fully populated...[ 16.403382] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 30 07:50:53.413756 [ 16.435304] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 07:50:53.449747 [ 16.533708] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jun 30 07:50:53.545723 [ 16.601085] panfrost 11800000.gpu: clock rate = 533000000 Jun 30 07:50:53.605723 [ 16.777172] usb3503 usb-hub: switched to HUB mode Jun 30 07:50:53.785748 [ 16.780400] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 07:50:53.797739 [ 16.788668] panfrost 11800000.gpu: mali-t600 id 0x600 major 0x0 minor 0x0 status 0x1 Jun 30 07:50:53.797808 [ 16.794970] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,31b4dfff Jun 30 07:50:53.809778 [ 16.803154] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 Jun 30 07:50:53.821766 [ 16.813188] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 07:50:53.833736 [ 16.814851] panfrost 11800000.gpu: shader_present=0xf l2_present=0x1 Jun 30 07:50:53.833798 [ 16.837584] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 0 Jun 30 07:50:53.845731 [ 16.886898] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 07:50:53.905690 [ 17.026403] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 07:50:54.037784 [ 17.105081] usb 1-3: new high-speed USB device number 2 using exynos-ehci Jun 30 07:50:54.121585 [ 17.134558] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 07:50:54.145767 [ 17.243022] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 07:50:54.253759 [ 17.287016] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Jun 30 07:50:54.301757 [ 17.293991] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jun 30 07:50:54.301821 [ 17.335007] hub 1-3:1.0: USB hub found Jun 30 07:50:54.349694 [ 17.338175] hub 1-3:1.0: 3 ports detected Jun 30 07:50:54.349754 [ 17.351467] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 07:50:54.361773 [ 17.399296] OF: graph: no port node found in /soc/hdmi@14530000 Jun 30 07:50:54.409727 [ 17.512886] I/O error, dev mmcblk1, sector 7743712 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 2 Jun 30 07:50:54.529705 [ 17.633619] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Jun 30 07:50:54.649694 [ 17.751686] usb 1-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=77.32 Jun 30 07:50:54.769763 [ 17.758857] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Jun 30 07:50:54.769832 [ 17.765961] usb 1-3.2: Product: USB2.0 Hub Jun 30 07:50:54.781696 [ 17.779954] hub 1-3.2:1.0: USB hub found Jun 30 07:50:54.793708 [ 17.786567] hub 1-3.2:1.0: 4 ports detected Jun 30 07:50:54.793767 [ 17.807488] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 07:50:54.817791 [ 17.878511] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 07:50:54.889763 [ 17.993312] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 07:50:55.009649 [ 18.085185] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 30 07:50:55.093768 [ 18.101061] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 07:50:55.117699 [ 18.207767] usb 1-3.2.4: New USB device found, idVendor=0b95, idProduct=772a, bcdDevice= 0.01 Jun 30 07:50:55.225757 [ 18.215416] usb 1-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 30 07:50:55.225826 [ 18.222586] usb 1-3.2.4: Product: AX88772 Jun 30 07:50:55.237730 [ 18.226562] usb 1-3.2.4: Manufacturer: ASIX Elec. Corp. Jun 30 07:50:55.237730 [ 18.231722] usb 1-3.2.4: SerialNumber: 000001 Jun 30 07:50:55.237730 [ 18.236661] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 07:50:55.249774 [ 18.345495] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 07:50:55.357788 [ 18.353373] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 07:50:55.369722 [ 18.707384] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 30 07:50:55.717831 [ 19.371850] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 07:50:56.389735 [ 19.387402] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Jun 30 07:50:56.401754 [ 19.399230] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 92:ea:ad:03:58:40 Jun 30 07:50:56.413740 [ 19.414004] usbcore: registered new interface driver asix Jun 30 07:50:56.425718 done. Jun 30 07:50:56.749748 [ 20.275404] EXT4-fs (dm-0): re-mounted. Quota mode: none. Jun 30 07:50:57.289595 Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). Jun 30 07:50:57.325699 Checking file systems.../dev/sda1: clean, 922/61056 files, 25374/243968 blocks Jun 30 07:50:58.945759 done. Jun 30 07:50:58.993644 Cleaning up temporary files... /tmp. Jun 30 07:50:59.245765 [ 22.476551] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 30 07:50:59.485734 [ 22.528673] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Jun 30 07:50:59.545617 [ 22.751841] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k FS Jun 30 07:50:59.773586 Mounting local filesystems...done. Jun 30 07:51:00.265733 Activating swapfile swap, if any...done. Jun 30 07:51:00.277698 Cleaning up temporary files.... Jun 30 07:51:00.361722 Starting Setting kernel variables: sysctl. Jun 30 07:51:00.481712 [ 24.161967] audit: type=1400 audit(1719733861.328:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=898 comm="apparmor_parser" Jun 30 07:51:01.177759 [ 24.179765] audit: type=1400 audit(1719733861.344:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=897 comm="apparmor_parser" Jun 30 07:51:01.201760 [ 24.193331] audit: type=1400 audit(1719733861.344:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=898 comm="apparmor_parser" Jun 30 07:51:01.213745 [ 24.409385] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Jun 30 07:51:01.417736 [ 24.517842] audit: type=1400 audit(1719733861.684:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=939 comm="apparmor_parser" Jun 30 07:51:01.537746 [ 24.536816] audit: type=1400 audit(1719733861.700:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=939 comm="apparmor_parser" Jun 30 07:51:01.561759 [ 24.550247] audit: type=1400 audit(1719733861.700:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=939 comm="apparmor_parser" Jun 30 07:51:01.573707 [ 24.905218] audit: type=1400 audit(1719733862.072:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=945 comm="apparmor_parser" Jun 30 07:51:01.924508 [ 24.920317] audit: type=1400 audit(1719733862.080:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=938 comm="apparmor_parser" Jun 30 07:51:01.945670 [ 24.936914] audit: type=1400 audit(1719733862.084:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=938 comm="apparmor_parser" Jun 30 07:51:01.957675 [ 24.954395] audit: type=1400 audit(1719733862.088:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=938 comm="apparmor_parser" Jun 30 07:51:01.981640 Starting: AppArmorLoading AppArmor profiles...done. Jun 30 07:51:01.981673 . Jun 30 07:51:01.981694 [ 26.567035] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 30 07:51:03.577664 [ 26.573084] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jun 30 07:51:03.589599 Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1 Jun 30 07:51:05.065667 Copyright 2004-2022 Internet Systems Consortium. Jun 30 07:51:05.077671 All rights reserved. Jun 30 07:51:05.077671 For info, please visit https://www.isc.org/software/dhcp/ Jun 30 07:51:05.077671 Jun 30 07:51:05.077671 Listening on LPF/eth0/9e:04:00:59:64:5a Jun 30 07:51:05.089704 Sending on LPF/eth0/9e:04:00:59:64:5a Jun 30 07:51:05.089704 Sending on Socket/fallback Jun 30 07:51:05.089704 Created duid "\000\001\000\001.\023\312\345\236\004\000YdZ". Jun 30 07:51:05.089704 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 Jun 30 07:51:05.101746 [ 29.664444] exynos4-fb 14400000.fimd: deferred probe timeout, ignoring dependency Jun 30 07:51:06.673749 [ 29.675374] exynos-mixer 14450000.mixer: deferred probe timeout, ignoring dependency Jun 30 07:51:06.685794 [ 29.683261] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations Jun 30 07:51:06.697775 [ 29.689648] exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm]) Jun 30 07:51:06.697843 [ 29.698158] exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm]) Jun 30 07:51:06.709755 [ 29.707672] exynos-drm exynos-drm: bound 14500000.dsi (ops hdmi_enable [exynosdrm]) Jun 30 07:51:06.721757 [ 29.714535] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm]) Jun 30 07:51:06.733655 [ 29.733699] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Jun 30 07:51:06.745753 [ 29.739362] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Jun 30 07:51:06.757675 [ 29.749301] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 Jun 30 07:51:06.757711 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 Jun 30 07:51:10.117814 DHCPOFFER of 10.149.64.44 from 10.149.64.4 Jun 30 07:51:10.129722 DHCPREQUEST for 10.149.64.44 on eth0 to 255.255.255.255 port 67 Jun 30 07:51:10.129786 DHCPACK of 10.149.64.44 from 10.149.64.4 Jun 30 07:51:10.129831 bound to 10.149.64.44 -- renewal in 252 seconds. Jun 30 07:51:10.141739 done. Jun 30 07:51:10.141816 Cleaning up temporary files.... Jun 30 07:51:10.201625 Starting nftables: none Jun 30 07:51:10.537671 . Jun 30 07:51:10.781671 INIT: Entering runlevel: 2 Jun 30 07:51:10.829654 Using makefile-style concurrent boot in runlevel 2. Jun 30 07:51:10.889686 Starting Apache httpd web server: apache2. Jun 30 07:51:13.037715 Starting periodic command scheduler: cron. Jun 30 07:51:13.373713 Starting NTP server: ntpd2024-06-30T07:51:13 ntpd[1130]: INIT: ntpd ntpsec-1.2.2: Starting Jun 30 07:51:13.541796 2024-06-30T07:51:13 ntpd[1130]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 30 07:51:13.553752 . Jun 30 07:51:13.553803 Starting system message bus: dbus. Jun 30 07:51:13.673694 Starting OpenBSD Secure Shell server: sshd. Jun 30 07:51:14.369715 Jun 30 07:51:15.437711 Debian GNU/Linux 12 arndale-metrocentre ttySAC2 Jun 30 07:51:15.454008 Jun 30 07:51:15.454073 arndale-metrocentre login: INIT: Switching to r INIT: No inittab.d directorUsing makefile-style concurrent boot in runlevel 6. Jun 30 07:56:14.097791 Stopping SMP IRQ Balancer: irqbalance Jun 30 07:56:14.169775 . Jun 30 07:56:14.169828 Stopping nftables: none. Jun 30 07:56:14.181688 Stopping hotplug events dispatcher: systemd-udevd. Jun 30 07:56:14.181750 Saving the system clock to /dev/rtc0. Jun 30 07:56:14.917760 Hardware Clock updated to Sun Jun 30 07:56:15 UTC 2024. Jun 30 07:56:14.929685 Stopping Apache httpd web server: apache2. Jun 30 07:56:15.337709 Asking all remaining processes to terminate...done. Jun 30 07:56:15.925788 All processes ended within 1 seconds...done. Jun 30 07:56:15.925850 Deconfiguring network interfaces...ifdown: ignoring unknown interface eth0=eth0 Jun 30 07:56:16.045708 done. Jun 30 07:56:16.045761 [ 339.245558] EXT4-fs (sda1): unmounting filesystem. Jun 30 07:56:16.249738 Deactivating swap...done. Jun 30 07:56:16.309683 Unmounting local filesystems...done. Jun 30 07:56:16.309742 [ 339.580410] EXT4-fs (dm-0): re-mounted. Quota mode: none. Jun 30 07:56:16.585717 Will now restart. Jun 30 07:56:16.873700 [ 339.894524] asix 1-3.2.4:1.0 eth0: Link is Down Jun 30 07:56:16.897730 [ 339.962091] sd 0:0:0:0: [sda] Synchronizing SCSI cache Jun 30 07:56:16.969754 [ 339.969854] wake enabled for irq 101 (gpx1-4) Jun 30 07:56:16.969815 [ 339.972737] wake enabled for irq 102 (gpx1-5) Jun 30 07:56:16.981774 [ 339.977097] wake enabled for irq 103 (gpx1-6) Jun 30 07:56:16.981835 [ 339.981432] wake enabled for irq 104 (gpx1-7) Jun 30 07:56:16.981882 [ 339.985773] wake enabled for irq 105 (gpx2-0) Jun 30 07:56:16.993748 [ 339.990119] wake enabled for irq 106 (gpx2-1) Jun 30 07:56:16.993808 [ 339.994975] reboot: Reó Jun 30 07:56:17.332416 Jun 30 07:56:17.332416 Jun 30 07:56:17.332416 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 07:56:17.344436 Jun 30 07:56:17.344436 CPU: Exynos5250@1000MHz Jun 30 07:56:17.344436 Jun 30 07:56:17.344436 Board: Arndale Jun 30 07:56:17.344436 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 07:56:17.344436 ready Jun 30 07:56:17.344436 DRAM: 2 GiB Jun 30 07:56:17.344436 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 07:56:17.368420 trace: enabled Jun 30 07:56:17.404337 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 07:56:17.761737 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 07:56:17.821736 In: serial Jun 30 07:56:17.821789 Out: serial Jun 30 07:56:17.821830 Err: serial Jun 30 07:56:17.821870 SCSI: ARNDALE SCSI INIT Jun 30 07:56:17.833727 Target spinup took 0 ms. Jun 30 07:56:17.833783 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 07:56:17.845744 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 07:56:17.845806 Net: Net Initialization Skipped Jun 30 07:56:17.845851 No ethernet found. Jun 30 07:56:17.845892 Hostname: arndale-metrocentre Jun 30 07:56:17.857668 Hit any key to stop autoboot: 2  1  0 Jun 30 07:56:19.780437 (Re)start USB... Jun 30 07:56:19.780437 USB0: USB EHCI 1.00 Jun 30 07:56:19.780437 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 07:56:25.377755 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 07:56:25.389707 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 07:56:25.833732 Waiting for Ethernet connection... done. Jun 30 07:56:27.525735 BOOTP broadcast 1 Jun 30 07:56:27.525801 BOOTP broadcast 2 Jun 30 07:56:28.917781 DHCP client bound to address 10.149.64.44 (1453 ms) Jun 30 07:56:28.929805 Using asx0 device Jun 30 07:56:28.929862 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 07:56:28.929912 Filename 'pxelinux.0'. Jun 30 07:56:28.929954 Load address: 0x43e00000 Jun 30 07:56:28.941735 Loading: *### Jun 30 07:56:28.953722 2.5 MiB/s Jun 30 07:56:28.953778 done Jun 30 07:56:28.953819 Bytes transferred = 42430 (a5be hex) Jun 30 07:56:28.953865 missing environment variable: pxeuuid Jun 30 07:56:28.965752 Retrieving file: pxelinux.cfg/0A95402C Jun 30 07:56:28.965806 Using asx0 device Jun 30 07:56:28.965848 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 07:56:28.965897 Filename 'pxelinux.cfg/0A95402C'. Jun 30 07:56:28.977767 Load address: 0x51000000 Jun 30 07:56:28.977825 Loading: *# Jun 30 07:56:28.977867 31.3 KiB/s Jun 30 07:56:28.977907 done Jun 30 07:56:28.977947 Bytes transferred = 65 (41 hex) Jun 30 07:56:28.977990 Config file found Jun 30 07:56:28.978031 Ignoring unknown command: serial Jun 30 07:56:28.989734 1: local Jun 30 07:56:28.989788 scanning bus for devices... Jun 30 07:56:28.989833 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 07:56:29.013801 Type: Hard Disk Jun 30 07:56:29.013860 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 07:56:29.025802 Found 1 device(s). Jun 30 07:56:29.025858 Jun 30 07:56:29.025898 SCSI device 0: Jun 30 07:56:29.025940 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 07:56:29.037799 Type: Hard Disk Jun 30 07:56:29.037857 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 07:56:29.037913 ... is now current device Jun 30 07:56:29.037962 Scanning scsi 0... Jun 30 07:56:29.049698 Found U-Boot script /boot.scr Jun 30 07:56:29.217723 1744 bytes read in 35 ms (47.9 KiB/s) Jun 30 07:56:29.265793 ## Executing script at 50000000 Jun 30 07:56:29.265852 Loading dtbs/6.1.96+/exynos5250-arndale.dtb Jun 30 07:56:29.265900 46686 bytes read in 3124 ms (13.7 KiB/s) Jun 30 07:56:32.293756 1048588 bytes read in 121 ms (8.3 MiB/s) Jun 30 07:56:32.425858 Loaded xen-4.19-unstable to 0x41000000 (10000c) Jun 30 07:56:32.437815 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan Jun 30 07:56:32.437913 10035712 bytes read in 406 ms (23.6 MiB/s) Jun 30 07:56:32.857791 Loaded vmlinuz-6.1.96+ to 0x42000000 (992200) Jun 30 07:56:32.869792 command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 07:56:32.881693 12053035 bytes read in 537 ms (21.4 MiB/s) Jun 30 07:56:33.421720 Loaded initrd.img-6.1.96+ to 0x43300000 (b7ea2b) Jun 30 07:56:33.421784 chosen { Jun 30 07:56:33.421825 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan"; Jun 30 07:56:33.433767 #size-cells = <0x00000001>; Jun 30 07:56:33.433824 #address-cells = <0x00000001>; Jun 30 07:56:33.445746 stdout-path = "serial2:115200n8"; Jun 30 07:56:33.445805 module@1 { Jun 30 07:56:33.445847 reg = <0x43300000 0x00b7ea2b>; Jun 30 07:56:33.445890 compatible = "xen,linux-initrd", "xen,multiboot-module"; Jun 30 07:56:33.457762 }; Jun 30 07:56:33.457815 module@0 { Jun 30 07:56:33.457857 bootargs = "ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Jun 30 07:56:33.469755 reg = <0x42000000 0x00992200>; Jun 30 07:56:33.469812 compatible = "xen,linux-zimage", "xen,multiboot-module"; Jun 30 07:56:33.481753 }; Jun 30 07:56:33.481806 }; Jun 30 07:56:33.481846 Booting 0x41000000 - 0x43000000 Jun 30 07:56:33.481890 Kernel image @ 0x41000000 [ 0x000000 - 0x13d000 ] Jun 30 07:56:33.481935 ## Flattened Device Tree blob at 43000000 Jun 30 07:56:33.493737 Booting using the fdt blob at 0x43000000 Jun 30 07:56:33.493844 reserving fdt memory region: addr=43000000 size=c000 Jun 30 07:56:33.505762 Loading Device Tree to 4fff1000, end 4fffffff ... OK Jun 30 07:56:33.505824 Jun 30 07:56:33.505864 Starting kernel ...(fake run for tracing) Jun 30 07:56:33.517777 Jun 30 07:56:33.517829 Jun 30 07:56:33.517868 Starting kernel ... Jun 30 07:56:33.517910 Jun 30 07:56:33.517948 __ __ _ _ _ ___ _ _ _ Jun 30 07:56:33.565826 \ \/ /___ _ __ | || | / |/ _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Jun 30 07:56:33.577828 \ // _ \ '_ \ | || |_ | | (_) |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Jun 30 07:56:33.577891 / \ __/ | | | |__ _|| |\__, |__| |_| | | | \__ \ || (_| | |_) | | __/ Jun 30 07:56:33.589850 /_/\_\___|_| |_| |_|(_)_| /_/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Jun 30 07:56:33.589914 Jun 30 07:56:33.589953 (XEN) Xen version 4.19-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Sun Jun 30 04:46:21 UTC 2024 Jun 30 07:56:33.601846 (XEN) Latest ChangeSet: Wed Jun 26 16:07:30 2024 +0100 git:08f9b1dd9c-dirty Jun 30 07:56:33.613832 (XEN) build-id: a680bf34d2b64bef710e3f1f7a1f083566429466 Jun 30 07:56:33.613894 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Jun 30 07:56:33.625831 (XEN) 32-bit Execution: Jun 30 07:56:33.625888 (XEN) Processor Features: 00001031:00011011 Jun 30 07:56:33.625934 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Jun 30 07:56:33.637827 (XEN) Extensions: GenericTimer Security Jun 30 07:56:33.637887 (XEN) Debug Features: 02010555 Jun 30 07:56:33.637931 (XEN) Auxiliary Features: 00000000 Jun 30 07:56:33.649833 (XEN) Memory Model Features: 10201105 20000000 Jun 30 07:56:33.649893 (XEN) 01240000 02102211 Jun 30 07:56:33.649940 (XEN) ISA Features: 02101110 13112111 21232041 Jun 30 07:56:33.661840 (XEN) 11112131 10011142 00000000 Jun 30 07:56:33.661900 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Jun 30 07:56:33.673831 (XEN) Set SYSRAM to 0000000041000074 (00200074) Jun 30 07:56:33.673890 (XEN) SMP: Allowing 2 CPUs Jun 30 07:56:33.685850 (XEN) enabled workaround for: ARM erratum 766422 Jun 30 07:56:33.685912 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Jun 30 07:56:33.685962 (XEN) GICv2 initialization: Jun 30 07:56:33.697822 (XEN) gic_dist_addr=0000000010481000 Jun 30 07:56:33.697880 (XEN) gic_cpu_addr=0000000010482000 Jun 30 07:56:33.697925 (XEN) gic_hyp_addr=0000000010484000 Jun 30 07:56:33.709829 (XEN) gic_vcpu_addr=0000000010486000 Jun 30 07:56:33.709887 (XEN) gic_maintenance_irq=25 Jun 30 07:56:33.709932 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Jun 30 07:56:33.721823 (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2) Jun 30 07:56:33.721884 (XEN) Initializing Credit2 scheduler Jun 30 07:56:33.721929 (XEN) load_precision_shift: 18 Jun 30 07:56:33.733826 (XEN) load_window_shift: 30 Jun 30 07:56:33.733883 (XEN) underload_balance_tolerance: 0 Jun 30 07:56:33.733927 (XEN) overload_balance_tolerance: -3 Jun 30 07:56:33.733970 (XEN) runqueues arrangement: socket Jun 30 07:56:33.745834 (XEN) cap enforcement granularity: 10ms Jun 30 07:56:33.745893 (XEN) load tracking window length 1073741824 ns Jun 30 07:56:33.745939 (XEN) Allocated console ring of 16 KiB. Jun 30 07:56:33.757771 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Jun 30 07:56:33.757834 (XEN) CPU0: Guest atomics will try 1 times before pausing the domain Jun 30 07:56:33.769831 (XEN) Bringing up CPU1 Jun 30 07:56:33.769887 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Jun 30 07:56:33.769937 (XEN) Brought up 2 CPUs Jun 30 07:56:33.781830 (XEN) CPU 1 booted. Jun 30 07:56:33.781886 (XEN) I/O virtualisation disabled Jun 30 07:56:33.781930 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Jun 30 07:56:33.781976 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Jun 30 07:56:33.793827 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Jun 30 07:56:33.793889 (XEN) Initializing Credit2 scheduler Jun 30 07:56:33.793933 (XEN) load_precision_shift: 18 Jun 30 07:56:33.805824 (XEN) load_window_shift: 30 Jun 30 07:56:33.805880 (XEN) underload_balance_tolerance: 0 Jun 30 07:56:33.805924 (XEN) overload_balance_tolerance: -3 Jun 30 07:56:33.805967 (XEN) runqueues arrangement: socket Jun 30 07:56:33.817819 (XEN) cap enforcement granularity: 10ms Jun 30 07:56:33.817878 (XEN) load tracking window length 1073741824 ns Jun 30 07:56:33.817924 (XEN) Adding cpu 0 to runqueue 0 Jun 30 07:56:33.829823 (XEN) First cpu on runqueue, activating Jun 30 07:56:33.829882 (XEN) Adding cpu 1 to runqueue 0 Jun 30 07:56:33.829925 (XEN) alternatives: Patching with alt table 002d2cc8 -> 002d2da0 Jun 30 07:56:33.841820 (XEN) CPU0 will execute ICIALLU on guest exit Jun 30 07:56:33.841879 (XEN) CPU1 will execute ICIALLU on guest exit Jun 30 07:56:33.841925 (XEN) *** LOADING DOMAIN 0 *** Jun 30 07:56:33.853805 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Jun 30 07:56:33.853867 (XEN) Loading ramdisk from boot module @ 0000000043300000 Jun 30 07:56:33.853914 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Jun 30 07:56:33.865810 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Jun 30 07:56:34.408797 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Jun 30 07:56:34.420711 (XEN) Allocating PPI 16 for event channel interrupt Jun 30 07:56:34.444795 (XEN) d0: extended regions not supported for 32-bit guests Jun 30 07:56:34.444856 (XEN) Loading zImage from 0000000042000000 to 0000000067600000-0000000067f92200 Jun 30 07:56:34.456763 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d7ea2b Jun 30 07:56:34.552532 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b4c6 Jun 30 07:56:34.648731 (XEN) Initial low memory virq threshold set at 0x4000 pages. Jun 30 07:56:34.660648 (XEN) Scrubbing Free RAM in background Jun 30 07:56:34.660648 (XEN) Std. Loglevel: All Jun 30 07:56:34.660648 (XEN) Guest Loglevel: All Jun 30 07:56:34.660648 (XEN) *************************************************** Jun 30 07:56:34.672787 (XEN) WARNING: SILO mode is not enabled. Jun 30 07:56:34.672853 (XEN) It has implications on the security of the system, Jun 30 07:56:34.684698 (XEN) unless the communications have been forbidden between Jun 30 07:56:34.684760 (XEN) untrusted domains. Jun 30 07:56:34.684803 (XEN) *************************************************** Jun 30 07:56:34.696580 (XEN) 3... 2... 1... Jun 30 07:56:37.689653 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 30 07:56:37.701732 (XEN) Freed 324kB init memory. Jun 30 07:56:37.701789 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 07:56:38.757707 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Jun 30 07:56:38.781664 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Jun 30 07:56:38.793670 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Jun 30 07:56:38.793670 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Jun 30 07:56:38.793670 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 07:56:38.805837 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 07:56:38.841637 [ 0.000000] Linux version 6.1.96+ (osstest@himrod1) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Sun Jun 30 02:58:42 UTC 2024 Jun 30 07:56:38.865794 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 30 07:56:38.865861 [ 0.000000] CPU: div instructions available: patching division code Jun 30 07:56:38.877782 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 07:56:38.877849 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 07:56:38.889801 [ 0.000000] Memory policy: Data cache writealloc Jun 30 07:56:38.889864 [ 0.000000] Xen 4.19 support found Jun 30 07:56:38.901745 [ 0.000000] efi: UEFI not found. Jun 30 07:56:38.901810 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 Jun 30 07:56:38.901836 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 07:56:38.913732 [ 0.000000] Zone ranges: Jun 30 07:56:38.913788 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Jun 30 07:56:38.913837 [ 0.000000] Normal empty Jun 30 07:56:38.925798 [ 0.000000] HighMem empty Jun 30 07:56:38.925854 [ 0.000000] Movable zone start for each node Jun 30 07:56:38.925901 [ 0.000000] Early memory node ranges Jun 30 07:56:38.937745 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Jun 30 07:56:38.937807 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Jun 30 07:56:38.949677 [ 0.000000] psci: probing for conduit method from DT. Jun 30 07:56:38.949710 [ 0.000000] psci: PSCIv1.1 detected in firmware. Jun 30 07:56:38.961751 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Jun 30 07:56:38.961813 [ 0.000000] psci: Trusted OS migration not required Jun 30 07:56:38.961859 [ 0.000000] psci: SMC Calling Convention v1.2 Jun 30 07:56:38.973739 [ 0.000000] percpu: Embedded 16 pages/cpu s35412 r8192 d21932 u65536 Jun 30 07:56:38.973807 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 Jun 30 07:56:38.985715 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 07:56:38.997767 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 07:56:39.009792 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Jun 30 07:56:39.021750 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Jun 30 07:56:39.021813 [ 0.000000] Memory: 416852K/524288K available (14336K kernel code, 2180K rwdata, 5600K rodata, 2048K init, 438K bss, 41900K reserved, 65536K cma-reserved, 0K highmem) Jun 30 07:56:39.045778 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 07:56:39.045844 [ 0.000000] trace event string verifier disabled Jun 30 07:56:39.045890 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 07:56:39.057747 [ 0.000000] rcu: RCU event tracing is enabled. Jun 30 07:56:39.057807 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Jun 30 07:56:39.069746 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Jun 30 07:56:39.069828 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 07:56:39.081725 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 07:56:39.081786 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 07:56:39.093763 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 07:56:39.105742 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Jun 30 07:56:39.105805 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 07:56:39.117761 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 07:56:39.129746 [ 0.000013] Switching to timer-based delay loop, resolution 41ns Jun 30 07:56:39.129808 [ 0.000528] Console: colour dummy device 80x30 Jun 30 07:56:39.141786 [ 0.293434] printk: console [hvc0] enabled Jun 30 07:56:39.141847 [ 0.297625] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Jun 30 07:56:39.153746 [ 0.308027] CPU: Testing write buffer coherency: ok Jun 30 07:56:39.153807 [ 0.312969] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 07:56:39.165698 [ 0.322522] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 07:56:39.177742 [ 0.328936] pid_max: default: 32768 minimum: 301 Jun 30 07:56:39.177805 [ 0.333729] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 07:56:39.189745 [ 0.341003] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 07:56:39.189815 [ 0.349414] /cpus/cpu@0 missing clock-frequency property Jun 30 07:56:39.201705 [ 0.354206] /cpus/cpu@1 missing clock-frequency property Jun 30 07:56:39.201739 [ 0.359601] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 07:56:39.213737 [ 0.366121] xen:grant_table: Grant tables using version 1 layout Jun 30 07:56:39.213800 [ 0.371448] Grant table initialized Jun 30 07:56:39.213847 [ 0.374989] xen:events: Using FIFO-based ABI Jun 30 07:56:39.225728 [ 0.379307] Xen: initializing cpu0 Jun 30 07:56:39.225787 [ 0.382839] Setting up static identity map for 0x60300000 - 0x603000ac Jun 30 07:56:39.237732 [ 0.390586] rcu: Hierarchical SRCU implementation. Jun 30 07:56:39.237794 [ 0.394223] rcu: Max phase no-delay instances is 1000. Jun 30 07:56:39.237842 [ 0.402302] EFI services will not be available. Jun 30 07:56:39.249723 [ 0.405608] smp: Bringing up secondary CPUs ... Jun 30 07:56:39.249774 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 07:56:39.321838 [ 0.480236] Xen: initializing cpu1 Jun 30 07:56:39.321898 [ 0.480393] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 07:56:39.333821 [ 0.480421] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 07:56:39.345825 [ 0.499293] smp: Brought up 1 node, 2 CPUs Jun 30 07:56:39.345885 [ 0.503065] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 07:56:39.357807 [ 0.509377] CPU: All CPU(s) started in SVC mode. Jun 30 07:56:39.357869 [ 0.514777] devtmpfs: initialized Jun 30 07:56:39.357913 [ 0.527135] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 07:56:39.381840 [ 0.533622] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Jun 30 07:56:39.381892 [ 0.543348] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 07:56:39.393810 [ 0.551392] pinctrl core: initialized pinctrl subsystem Jun 30 07:56:39.393871 [ 0.557879] DMI not present or invalid. Jun 30 07:56:39.405822 [ 0.560985] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 07:56:39.405885 [ 0.568180] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 07:56:39.417823 [ 0.576941] thermal_sys: Registered thermal governor 'step_wise' Jun 30 07:56:39.429819 [ 0.577073] software IO TLB: area num 2. Jun 30 07:56:39.429879 [ 0.585754] software IO TLB: only able to allocate 8 MB Jun 30 07:56:39.429927 [ 0.592898] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Jun 30 07:56:39.441858 [ 0.598085] No ATAGs? Jun 30 07:56:39.441915 [ 0.600434] hw-breakpoint: Failed to enable monitor mode on CPU 0. Jun 30 07:56:39.453739 [ 0.608932] Serial: AMBA PL011 UART driver Jun 30 07:56:39.453771 [ 0.631090] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 62 Jun 30 07:56:39.477696 [ 0.680535] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 30 07:56:39.525741 [ 0.704765] xen:balloon: Initialising balloon driver Jun 30 07:56:39.549607 [ 0.712325] iommu: Default domain type: Translated Jun 30 07:56:39.561737 [ 0.715830] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 07:56:39.561801 [ 0.722776] SCSI subsystem initialized Jun 30 07:56:39.573753 [ 0.726327] usbcore: registered new interface driver usbfs Jun 30 07:56:39.573815 [ 0.731577] usbcore: registered new interface driver hub Jun 30 07:56:39.585738 [ 0.736967] usbcore: registered new device driver usb Jun 30 07:56:39.585801 [ 0.743583] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 07:56:39.585849 [ 0.747196] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 07:56:39.597766 [ 0.753515] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 07:56:39.609744 [ 0.761946] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 07:56:39.609817 [ 0.771085] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 07:56:39.621826 [ 0.776591] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 07:56:39.621886 [ 0.781289] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 07:56:39.633732 [ 0.787537] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 07:56:39.633732 [ 0.792763] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 07:56:39.645753 [ 0.797542] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 07:56:39.645834 [ 0.803659] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 07:56:39.645860 [ 0.808837] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 07:56:39.657768 [ 0.813752] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 07:56:39.657830 [ 0.819784] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 07:56:39.669717 [ 0.825553] pps_core: LinuxPPS API ver. 1 registered Jun 30 07:56:39.669717 [ 0.830011] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 07:56:39.681782 [ 0.839194] PTP clock support registered Jun 30 07:56:39.681839 [ 0.843377] EDAC MC: Ver: 3.0.0 Jun 30 07:56:39.693758 [ 0.848668] vgaarb: loaded Jun 30 07:56:39.693816 [ 0.854816] clocksource: Switched to clocksource arch_sys_counter Jun 30 07:56:39.705702 [ 0.877090] NET: Registered PF_INET protocol family Jun 30 07:56:39.717716 [ 0.880725] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Jun 30 07:56:39.729762 [ 0.888630] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 07:56:39.741756 [ 0.896327] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 07:56:39.741844 [ 0.904123] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Jun 30 07:56:39.753781 [ 0.911989] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Jun 30 07:56:39.765745 [ 0.919259] TCP: Hash tables configured (established 4096 bind 4096) Jun 30 07:56:39.765808 [ 0.925620] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 07:56:39.777750 [ 0.932168] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 07:56:39.777815 [ 0.939306] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 07:56:39.789769 [ 0.945770] RPC: Registered named UNIX socket transport module. Jun 30 07:56:39.789832 [ 0.950902] RPC: Registered udp transport module. Jun 30 07:56:39.801759 [ 0.955698] RPC: Registered tcp transport module. Jun 30 07:56:39.801820 [ 0.960450] RPC: Registered tcp NFSv4.1 backchannel transport module. Jun 30 07:56:39.813750 [ 0.966972] PCI: CLS 0 bytes, default 64 Jun 30 07:56:39.813809 [ 0.972306] Initialise system trusted keyrings Jun 30 07:56:39.813849 [ 0.975688] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Jun 30 07:56:39.825737 [ 0.977611] Trying to unpack rootfs image as initramfs... Jun 30 07:56:39.825799 [ 0.989651] squashfs: version 4.0 (2009/01/31) Phillip Lougher Jun 30 07:56:39.837712 [ 1.017917] NFS: Registering the id_resolver key type Jun 30 07:56:39.861747 [ 1.021638] Key type id_resolver registered Jun 30 07:56:39.873753 [ 1.025902] Key type id_legacy registered Jun 30 07:56:39.873813 [ 1.030070] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Jun 30 07:56:39.873865 [ 1.036757] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Jun 30 07:56:39.885709 [ 1.084133] Key type asymmetric registered Jun 30 07:56:39.933753 [ 1.086891] Asymmetric key parser 'x509' registered Jun 30 07:56:39.933818 [ 1.091944] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Jun 30 07:56:39.945748 [ 1.099355] io scheduler mq-deadline registered Jun 30 07:56:39.945748 [ 1.103875] io scheduler kyber registered Jun 30 07:56:39.945748 [ 1.140816] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Jun 30 07:56:39.993709 [ 1.266902] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 07:56:40.113759 [ 1.273106] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 07:56:40.125698 [ 1.308355] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 07:56:40.161737 [ 1.314561] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 07:56:40.161809 [ 1.346712] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 07:56:40.197735 [ 1.352910] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 07:56:40.209694 [ 1.381363] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 07:56:40.233750 [ 1.387606] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 07:56:40.233821 [ 1.402295] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 07:56:40.257689 [ 1.477590] Freeing initrd memory: 11772K Jun 30 07:56:40.317713 [ 1.496980] xen:xen_evtchn: Event-channel device installed Jun 30 07:56:40.341716 [ 1.555655] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 07:56:40.401746 [ 1.564294] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 113, base_baud = 0) is a S3C6400/10 Jun 30 07:56:40.413761 [ 1.572369] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 114, base_baud = 0) is a S3C6400/10 Jun 30 07:56:40.425671 [ 1.581318] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 115, base_baud = 0) is a S3C6400/10 Jun 30 07:56:40.437745 [ 1.590669] SuperH (H)SCI(F) driver initialized Jun 30 07:56:40.437830 [ 1.595545] STMicroelectronics ASC driver initialized Jun 30 07:56:40.437882 [ 1.600910] STM32 USART driver initialized Jun 30 07:56:40.449734 [ 1.605588] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 07:56:40.449798 [ 1.621141] brd: module loaded Jun 30 07:56:40.461707 [ 1.626987] loop: module loaded Jun 30 07:56:40.473691 [ 1.649738] Invalid max_queues (4), will use default max: 2. Jun 30 07:56:40.497715 [ 1.675969] tun: Universal TUN/TAP device driver, 1.6 Jun 30 07:56:40.521745 [ 1.679866] CAN device driver interface Jun 30 07:56:40.521803 [ 1.684947] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Jun 30 07:56:40.533740 [ 1.695407] xen_netfront: Initialising Xen virtual ethernet driver Jun 30 07:56:40.545758 [ 1.700292] pegasus: Pegasus/Pegasus II USB Ethernet driver Jun 30 07:56:40.545820 [ 1.705895] usbcore: registered new interface driver pegasus Jun 30 07:56:40.557780 [ 1.711618] usbcore: registered new interface driver asix Jun 30 07:56:40.558484 [ 1.717107] usbcore: registered new interface driver ax88179_178a Jun 30 07:56:40.569751 [ 1.723230] usbcore: registered new interface driver cdc_ether Jun 30 07:56:40.569814 [ 1.729171] usbcore: registered new interface driver smsc75xx Jun 30 07:56:40.581748 [ 1.734979] usbcore: registered new interface driver smsc95xx Jun 30 07:56:40.581811 [ 1.740779] usbcore: registered new interface driver net1080 Jun 30 07:56:40.593751 [ 1.746534] usbcore: registered new interface driver cdc_subset Jun 30 07:56:40.593814 [ 1.752494] usbcore: registered new interface driver zaurus Jun 30 07:56:40.605748 [ 1.758185] usbcore: registered new interface driver cdc_ncm Jun 30 07:56:40.605810 [ 1.767811] usbcore: registered new interface driver usb-storage Jun 30 07:56:40.617704 [ 1.802520] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 07:56:40.653716 [ 1.811383] s5m-rtc s5m-rtc: setting system clock to 2024-06-30T07:50:41 UTC (1719733841) Jun 30 07:56:40.665687 [ 1.820007] i2c_dev: i2c /dev entries driver Jun 30 07:56:40.665746 [ 1.830248] syscon-poweroff 10040000.system-controller:syscon-poweroff: pm_power_off already claimed for psci_sys_poweroff Jun 30 07:56:40.677745 [ 1.839953] syscon-poweroff: probe of 10040000.system-controller:syscon-poweroff failed with error -16 Jun 30 07:56:40.689641 [ 1.851162] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Jun 30 07:56:40.701671 [ 1.861908] device-mapper: uevent: version 1.0.3 Jun 30 07:56:40.713643 [ 1.865418] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Jun 30 07:56:40.713678 [ 1.874308] cpu cpu0: OPP table can't be empty Jun 30 07:56:40.725626 [ 1.879436] failed to register cpuidle driver Jun 30 07:56:40.725654 [ 1.882598] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Jun 30 07:56:40.737637 [ 1.890929] sdhci: Secure Digital Host Controller Interface driver Jun 30 07:56:40.737668 [ 1.895992] sdhci: Copyright(c) Pierre Ossman Jun 30 07:56:40.737693 [ 1.903937] sdhci-pltfm: SDHCI platform and OF driver helper Jun 30 07:56:40.749652 [ 1.911590] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 07:56:40.761677 [ 1.916916] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Jun 30 07:56:40.761712 [ 1.923456] usbcore: registered new interface driver usbhid Jun 30 07:56:40.773614 [ 1.928411] usbhid: USB HID core driver Jun 30 07:56:40.773646 [ 1.939180] NET: Registered PF_INET6 protocol family Jun 30 07:56:40.785664 [ 1.943777] Segment Routing with IPv6 Jun 30 07:56:40.785696 [ 1.946576] In-situ OAM (IOAM) with IPv6 Jun 30 07:56:40.797651 [ 1.950554] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Jun 30 07:56:40.797686 [ 1.956958] NET: Registered PF_PACKET protocol family Jun 30 07:56:40.809662 [ 1.961622] can: controller area network core Jun 30 07:56:40.809709 [ 1.966109] NET: Registered PF_CAN protocol family Jun 30 07:56:40.809738 [ 1.970891] can: raw protocol Jun 30 07:56:40.821652 [ 1.973931] can: broadcast manager protocol Jun 30 07:56:40.821684 [ 1.978242] can: netlink gateway - max_hops=1 Jun 30 07:56:40.821710 [ 1.982837] Key type dns_resolver registered Jun 30 07:56:40.833662 [ 1.987584] ThumbEE CPU extension supported. Jun 30 07:56:40.833695 [ 1.991294] Registering SWP/SWPB emulation handler Jun 30 07:56:40.833720 [ 1.996639] Loading compiled-in X.509 certificates Jun 30 07:56:40.845605 [ 2.024936] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 07:56:40.869679 [ 2.030991] clk: Not disabling unused clocks Jun 30 07:56:40.881660 [ 2.038138] Freeing unused kernel image (initmem) memory: 2048K Jun 30 07:56:40.881695 [ 2.044249] Run /init as init process Jun 30 07:56:40.893595 Loading, please wait... Jun 30 07:56:40.917613 Starting systemd-udevd version 252.26-1~deb12u2 Jun 30 07:56:40.989598 [ 3.366808] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 07:56:42.213765 [ 3.374016] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 07:56:42.225742 [ 3.396896] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 07:56:42.249682 [ 3.410625] phy phy-12130000.phy.9: phy_power_on was called before phy_init Jun 30 07:56:42.261790 [ 3.416260] exynos-ohci 12120000.usb: USB Host Controller Jun 30 07:56:42.261856 [ 3.421701] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Jun 30 07:56:42.273736 [ 3.429801] Synopsys Designware Multimedia Card Interface Driver Jun 30 07:56:42.273798 [ 3.444647] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 30 07:56:42.297724 [ 3.444704] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 30 07:56:42.297789 [ 3.464562] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 Jun 30 07:56:42.309730 [ 3.485045] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 30 07:56:42.333749 [ 3.491577] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 30 07:56:42.345746 [ 3.498998] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 30 07:56:42.345814 [ 3.510082] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 07:56:42.357723 [ 3.520965] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 30 07:56:42.369761 [ 3.526091] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 30 07:56:42.369823 [ 3.532215] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo Jun 30 07:56:42.381737 [ 3.546055] mmc_host mmc0: card is polling. Jun 30 07:56:42.393728 [ 3.550490] hub 1-0:1.0: USB hub found Jun 30 07:56:42.393786 [ 3.558711] hub 1-0:1.0: 3 ports detected Jun 30 07:56:42.405780 [ 3.561559] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 07:56:42.417689 [ 3.618249] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 30 07:56:42.465684 [ 3.623965] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Jun 30 07:56:42.477651 [ 3.632944] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 30 07:56:42.489664 [ 3.642302] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 30 07:56:42.489699 [ 3.648665] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 30 07:56:42.501644 [ 3.654143] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 127,32 bit host data width,128 deep fifo Jun 30 07:56:42.501684 [ 3.674887] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Jun 30 07:56:42.525645 [ 3.679055] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 30 07:56:42.537641 [ 3.682101] s3c-rtc 101e0000.rtc: registered as rtc1 Jun 30 07:56:42.537696 [ 3.689967] mmc0: new DDR MMC card at address 0001 Jun 30 07:56:42.537724 [ 3.696350] phy phy-12130000.phy.9: phy_power_on was called before phy_init Jun 30 07:56:42.549696 [ 3.705864] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 07:56:42.549730 [ 3.711405] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Jun 30 07:56:42.561705 [ 3.741848] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Jun 30 07:56:42.585755 [ 3.746772] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 Jun 30 07:56:42.597681 [ 3.756200] scsi host0: ahci-dwc Jun 30 07:56:42.597713 [ 3.758374] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 128 Jun 30 07:56:42.609666 [ 3.766578] mmcblk0: p1 p2 p3 p4 Jun 30 07:56:42.609697 [ 3.769639] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 07:56:42.621681 [ 3.780199] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Jun 30 07:56:42.621713 [ 3.785015] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 07:56:42.633662 [ 3.791660] hub 2-0:1.0: USB hub found Jun 30 07:56:42.633694 [ 3.794080] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Jun 30 07:56:42.645618 [ 3.795006] hub 2-0:1.0: 3 ports detected Jun 30 07:56:42.645651 [ 3.815611] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Jun 30 07:56:42.657622 [ 3.883984] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 07:56:42.729656 [ 3.893782] mmc1: new high speed SDHC card at address aaaa Jun 30 07:56:42.741636 [ 3.899536] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Jun 30 07:56:42.741669 [ 4.264882] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 30 07:56:43.113751 [ 4.270640] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 30 07:56:43.113816 [ 4.276483] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 30 07:56:43.125763 [ 4.284252] ata1.00: configured for UDMA/133 Jun 30 07:56:43.125823 [ 4.288004] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 30 07:56:43.137670 [ 4.297194] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 30 07:56:43.149773 [ 4.303313] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 30 07:56:43.149834 [ 4.308880] sd 0:0:0:0: [sda] Write Protect is off Jun 30 07:56:43.161741 [ 4.313678] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 30 07:56:43.161813 [ 4.322809] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 30 07:56:43.173700 [ 4.353496] sda: sda1 sda2 < sda5 > Jun 30 07:56:43.197724 [ 4.356355] sd 0:0:0:0: [sda] Attached SCSI disk Jun 30 07:56:43.197783 [ 4.368308] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Jun 30 07:56:43.221678 [ 4.395547] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Jun 30 07:56:43.245768 [ 4.402812] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 07:56:43.245833 [ 4.407001] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 07:56:43.257651 [ 4.421552] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Jun 30 07:56:43.269636 [ 4.432748] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Jun 30 07:56:43.281654 [ 4.441111] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 07:56:43.293727 [ 4.445539] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 07:56:43.293801 [ 4.455226] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 07:56:43.305743 [ 4.462405] hub 3-0:1.0: USB hub found Jun 30 07:56:43.305801 [ 4.465617] hub 3-0:1.0: 1 port detected Jun 30 07:56:43.305846 [ 4.469498] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 07:56:43.317746 [ 4.481270] hub 4-0:1.0: USB hub found Jun 30 07:56:43.329750 [ 4.483687] hub 4-0:1.0: 1 port detected Jun 30 07:56:43.329810 [ 4.878169] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 07:56:43.725775 [ 4.950374] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 07:56:43.797646 [ 5.084133] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 07:56:43.929660 [ 5.205624] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 07:56:44.061684 [ 5.313768] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 07:56:44.169589 [ 5.647885] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 07:56:44.493650 [ 5.721689] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 07:56:44.577677 [ 5.835985] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 07:56:44.685729 [ 5.943691] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 07:56:44.793735 [ 6.051412] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 07:56:44.901731 [ 6.071886] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 07:56:44.925677 [ 6.914808] random: crng init done Jun 30 07:56:45.765776 Begin: Loading essential drivers ... done. Jun 30 07:56:46.389685 Begin: Running /scripts/init-premount ... done. Jun 30 07:56:49.413684 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 30 07:56:49.413729 Begin: Running /scripts/local-premount ... done. Jun 30 07:56:49.425631 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 30 07:56:49.473637 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 30 07:56:49.565694 /dev/mapper/arndale--metrocentre--vg-root: clean, 46009/1220608 files, 605288/4882432 blocks Jun 30 07:56:49.833620 done. Jun 30 07:56:49.857669 [ 11.014630] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 30 07:56:49.857707 [ 11.383764] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: disabled. Jun 30 07:56:50.229693 done. Jun 30 07:56:50.229721 Begin: Running /scripts/local-bottom ... done. Jun 30 07:56:50.277669 Begin: Running /scripts/init-bottom ... done. Jun 30 07:56:50.313640 INIT: version 3.06 booting Jun 30 07:56:50.781673 INIT: No inittab.d directory found Jun 30 07:56:50.841602 Using makefile-style concurrent boot in runlevel S. Jun 30 07:56:51.141613 Starting hotplug events dispatcher: systemd-udevd. Jun 30 07:56:52.857715 Synthesizing the initial hotplug events (subsystems)...done. Jun 30 07:56:53.289655 Synthesizing the initial hotplug events (devices)...[ 14.733731] wm8994 3-001a: Device is not a WM8994, ID is 0 Jun 30 07:56:53.577703 [ 14.744469] wm8994: probe of 3-001a failed with error -22 Jun 30 07:56:53.589668 [ 15.446606] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 30 07:56:54.297727 [ 15.456339] mc: Linux media interface: v0.10 Jun 30 07:56:54.297773 [ 15.463121] s5p-secss 10830000.sss: s5p-sss driver registered Jun 30 07:56:54.309661 [ 15.515182] videodev: Linux video capture interface: v2.00 Jun 30 07:56:54.357663 done. Jun 30 07:56:54.489686 Waiting for /dev to be fully populated...[ 15.678061] s5p-mfc 11000000.codec: Adding to iommu group 0 Jun 30 07:56:54.525725 [ 15.729214] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Jun 30 07:56:54.573672 [ 15.760370] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 07:56:54.609769 [ 15.774089] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 07:56:54.621765 [ 15.782380] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 07:56:54.633747 [ 15.793980] s5p-mfc 11000000.codec: decoder registered as /dev/video0 Jun 30 07:56:54.645725 [ 15.800970] s5p-mfc 11000000.codec: encoder registered as /dev/video1 Jun 30 07:56:54.645789 [ 15.983354] exynos-gsc 13e00000.gsc: Adding to iommu group 1 Jun 30 07:56:54.825723 [ 15.997764] exynos-gsc 13e10000.gsc: Adding to iommu group 2 Jun 30 07:56:54.849756 [ 16.002864] exynos-gsc 13e20000.gsc: Adding to iommu group 3 Jun 30 07:56:54.849819 [ 16.004889] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 07:56:54.861755 [ 16.018008] exynos-gsc 13e30000.gsc: Adding to iommu group 4 Jun 30 07:56:54.861816 [ 16.093635] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 07:56:54.945611 [ 16.124891] usb3503 usb-hub: switched to HUB mode Jun 30 07:56:54.969696 [ 16.128269] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 07:56:54.981647 [ 16.248357] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 07:56:55.101706 [ 16.354019] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Jun 30 07:56:55.197744 [ 16.362024] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 07:56:55.209768 [ 16.470242] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 07:56:55.317737 [ 16.478626] usb 2-3: new high-speed USB device number 2 using exynos-ehci Jun 30 07:56:55.329706 [ 16.578567] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 07:56:55.425898 [ 16.686303] hub 2-3:1.0: USB hub found Jun 30 07:56:55.533734 [ 16.688797] hub 2-3:1.0: 3 ports detected Jun 30 07:56:55.533792 [ 16.810199] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 07:56:55.669710 [ 16.817887] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 07:56:55.669710 [ 16.826643] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 07:56:55.681750 [ 16.841000] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 07:56:55.693739 [ 16.848675] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 07:56:55.705768 [ 16.857398] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 07:56:55.705847 [ 16.912660] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 07:56:55.765720 [ 16.986587] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 07:56:55.837720 [ 17.044889] usb 2-3.2: new high-speed USB device number 3 using exynos-ehci Jun 30 07:56:55.897693 [ 17.101003] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 07:56:55.945690 [ 17.197477] hub 2-3.2:1.0: USB hub found Jun 30 07:56:56.041752 [ 17.200515] hub 2-3.2:1.0: 4 ports detected Jun 30 07:56:56.041811 [ 17.208804] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 07:56:56.053758 [ 17.281028] usbcore: registered new device driver onboard-usb-hub Jun 30 07:56:56.125731 [ 17.316617] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 07:56:56.161764 [ 17.415654] hub 2-3.2:1.0: USB hub found Jun 30 07:56:56.257732 [ 17.418627] hub 2-3.2:1.0: 4 ports detected Jun 30 07:56:56.269744 [ 17.424415] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 07:56:56.269850 [ 17.432090] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 07:56:56.281749 [ 17.445024] hub 2-3.2:1.0: USB hub found Jun 30 07:56:56.293688 [ 17.448283] hub 2-3.2:1.0: 4 ports detected Jun 30 07:56:56.293688 done. Jun 30 07:56:56.461715 [ 17.774865] usb 2-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 30 07:56:56.617740 [ 17.958311] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 30 07:56:56.809632 [ 17.986986] EXT4-fs (dm-0): re-mounted. Quota mode: disabled. Jun 30 07:56:56.833609 Checking file systems.../dev/sda1: clean, 2105/61056 files, 43310/243968 blocks Jun 30 07:56:58.124522 done. Jun 30 07:56:58.148507 Cleaning up temporary files... /tmp Jun 30 07:56:58.436515 . Jun 30 07:56:58.436515 [ 19.777029] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 30 07:56:58.628512 [ 19.828935] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: disabled. Jun 30 07:56:58.676539 [ 19.929357] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k Jun 30 07:56:58.784503 Mounting local filesystems...done. Jun 30 07:56:59.681754 Activating swapfile swap, if any...done. Jun 30 07:56:59.681837 Cleaning up temporary files.... Jun 30 07:56:59.717737 Starting Setting kernel variables: sysctl. Jun 30 07:56:59.897731 [ 22.427441] xenbr0: port 1(eth0) entered blocking state Jun 30 07:57:01.277913 [ 22.431301] xenbr0: port 1(eth0) entered disabled state Jun 30 07:57:01.315313 [ 22.436800] device eth0 entered promiscuous mode Jun 30 07:57:01.315416 [ 22.446430] asix 2-3.2.4:1.0 eth0: configuring for phy/internal link mode Jun 30 07:57:01.315427 Configuring network interfaces...RTNETLINK answers: Operation not supported Jun 30 07:57:02.993917 Jun 30 07:57:02.993917 Waiting for xenbr0 to get ready (MAXWAIT is 2 seconds). Jun 30 07:57:03.005721 [ 24.652062] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 30 07:57:03.497725 [ 24.658060] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jun 30 07:57:03.509726 [ 24.664401] xenbr0: port 1(eth0) entered blocking state Jun 30 07:57:03.509786 [ 24.669659] xenbr0: port 1(eth0) entered forwarding state Jun 30 07:57:03.521746 [ 24.675553] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready Jun 30 07:57:03.521746 done. Jun 30 07:57:03.677668 Cleaning up temporary files.... Jun 30 07:57:03.749728 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Jun 30 07:57:03.785756 Starting nftables: none Jun 30 07:57:03.857734 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Jun 30 07:57:03.941751 failed! Jun 30 07:57:03.953760 startpar: service(s) returned failure: nftables ... failed! Jun 30 07:57:03.953769 INIT: Entering runlevel: 2 Jun 30 07:57:03.977752 Using makefile-style concurrent boot in runlevel 2. Jun 30 07:57:03.989746 Starting Apache httpd web server: apache2AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.149.64.44. Set the 'ServerName' directive globally to suppress this message Jun 30 07:57:04.829774 . Jun 30 07:57:05.897730 Starting SMP IRQ Balancer: irqbalance. Jun 30 07:57:06.341743 Starting NTP server: ntpd2024-06-30T07:51:07 ntpd[1144]: INIT: ntpd ntpsec-1.2.2: Starting Jun 30 07:57:06.373519 2024-06-30T07:51:07 ntpd[1144]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 30 07:57:06.377754 . Jun 30 07:57:06.377805 Starting system message bus: dbus. Jun 30 07:57:06.761713 Starting OpenBSD Secure Shell server: sshd. Jun 30 07:57:07.625665 Starting /usr/local/sbin/oxenstored.... Jun 30 07:57:10.745694 Setting domain 0 name, domid and JSON config... Jun 30 07:57:10.757740 Done setting up Dom0 Jun 30 07:57:10.757795 Starting xenconsoled... Jun 30 07:57:10.757874 Starting QEMU as disk backend for dom0 Jun 30 07:57:10.757921 Jun 30 07:57:12.077741 Debian GNU/Linux 12 arndale-metrocentre hvc0 Jun 30 07:57:12.089721 Jun 30 07:57:12.089772 arndale-metrocentre login: [ 70.801979] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 07:57:49.645904 [ 70.942902] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Jun 30 07:57:49.789791 [ 72.735838] EXT4-fs (dm-2): unmounting filesystem. Jun 30 07:57:51.581711 [ 89.035794] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 07:58:07.881803 [ 89.177153] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Jun 30 07:58:08.025718 [ 91.371361] xenbr0: port 2(vif1.0) entered blocking state Jun 30 07:58:10.221774 [ 91.375450] xenbr0: port 2(vif1.0) entered disabled state Jun 30 07:58:10.221857 [ 91.381053] device vif1.0 entered promiscuous mode Jun 30 07:58:10.221911 (XEN) d1v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 07:58:14.265724 (XEN) d1v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 07:58:14.373673 (XEN) d1v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 07:58:14.421651 (XEN) common/grant_table.c:1909:d1v1 Expanding d1 grant table from 1 to 2 frames Jun 30 07:58:17.289734 (XEN) common/grant_table.c:1909:d1v1 Expanding d1 grant table from 2 to 3 frames Jun 30 07:58:17.301679 [ 98.520517] vif vif-1-0 vif1.0: Guest Rx ready Jun 30 07:58:17.361698 [ 98.523637] IPv6: ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready Jun 30 07:58:17.373700 [ 98.531220] xenbr0: port 2(vif1.0) entered blocking state Jun 30 07:58:17.373734 [ 98.537933] xenbr0: port 2(vif1.0) entered forwarding state Jun 30 07:58:17.385658 (XEN) gnttab_mark_dirty not implemented yet Jun 30 07:58:17.421639 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 07:58:51.141620 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 08:05:32.561778 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 08:12:13.941752 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 08:18:55.357566 [ 1516.609715] xenbr0: port 2(vif1.0) entered disabled state Jun 30 08:21:55.437832 [ 1532.805186] xenbr0: port 2(vif1.0) entered disabled state Jun 30 08:22:11.633790 [ 1532.809551] device vif1.0 left promiscuous mode Jun 30 08:22:11.633865 [ 1532.813877] xenbr0: port 2(vif1.0) entered disabled state Jun 30 08:22:11.645777 [ 1536.296105] EXT4-fs (dm-2): unmounting filesystem. Jun 30 08:22:15.125672 [ 1549.042752] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 08:22:27.880539 [ 1549.184095] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Jun 30 08:22:28.012591 [ 1549.804134] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Jun 30 08:22:28.640573 [ 1549.823339] xvda: xvda1 xvda2 xvda3 < xvda5 > Jun 30 08:22:28.652550 [ 1559.896949] xenbr0: port 2(vif2.0) entered blocking state Jun 30 08:22:38.729811 [ 1559.900981] xenbr0: port 2(vif2.0) entered disabled state Jun 30 08:22:38.729895 [ 1559.906663] device vif2.0 entered promiscuous mode Jun 30 08:22:38.741775 (XEN) d2v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 08:22:42.929779 (XEN) d2v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 08:22:43.049689 (XEN) d2v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 08:22:43.085703 (XEN) common/grant_table.c:1909:d2v1 Expanding d2 grant table from 1 to 2 frames Jun 30 08:22:46.193755 (XEN) common/grant_table.c:1909:d2v1 Expanding d2 grant table from 2 to 3 frames Jun 30 08:22:46.205695 [ 1567.437031] vif vif-2-0 vif2.0: Guest Rx ready Jun 30 08:22:46.265754 [ 1567.440885] IPv6: ADDRCONF(NETDEV_CHANGE): vif2.0: link becomes ready Jun 30 08:22:46.277728 [ 1567.446752] xenbr0: port 2(vif2.0) entered blocking state Jun 30 08:22:46.277764 [ 1567.454354] xenbr0: port 2(vif2.0) entered forwarding state Jun 30 08:22:46.289816 [ 1606.610128] xenbr0: port 2(vif2.0) entered disabled state Jun 30 08:23:25.441663 [ 1606.876354] xenbr0: port 2(vif2.0) entered disabled state Jun 30 08:23:25.705715 [ 1606.881009] device vif2.0 left promiscuous mode Jun 30 08:23:25.705757 [ 1606.885053] xenbr0: port 2(vif2.0) entered disabled state Jun 30 08:23:25.717621 [ 1633.181784] EXT4-fs (dm-2): unmounting filesystem. Jun 30 08:23:52.005789 [ 1634.413749] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 08:23:53.249502 [ 1634.555139] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Jun 30 08:23:53.393574 [ 1635.041651] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Jun 30 08:23:53.873485 [ 1635.059728] xvda: xvda1 xvda2 xvda3 < xvda5 > Jun 30 08:23:53.885625 [ 1642.692570] xenbr0: port 2(vif3.0) entered blocking state Jun 30 08:24:01.525787 [ 1642.696643] xenbr0: port 2(vif3.0) entered disabled state Jun 30 08:24:01.525872 [ 1642.702227] device vif3.0 entered promiscuous mode Jun 30 08:24:01.537581 (XEN) d3v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 08:24:05.729690 (XEN) d3v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 08:24:05.837669 (XEN) d3v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 08:24:05.885619 (XEN) common/grant_table.c:1909:d3v1 Expanding d3 grant table from 1 to 2 frames Jun 30 08:24:09.008448 (XEN) common/grant_table.c:1909:d3v1 Expanding d3 grant table from 2 to 3 frames Jun 30 08:24:09.020381 [ 1650.247987] vif vif-3-0 vif3.0: Guest Rx ready Jun 30 08:24:09.080437 [ 1650.253242] IPv6: ADDRCONF(NETDEV_CHANGE): vif3.0: link becomes ready Jun 30 08:24:09.080437 [ 1650.260161] xenbr0: port 2(vif3.0) entered blocking state Jun 30 08:24:09.092428 [ 1650.266115] xenbr0: port 2(vif3.0) entered forwarding state Jun 30 08:24:09.104294 [ 1685.273188] xenbr0: port 2(vif3.0) entered disabled state Jun 30 08:24:44.104510 [ 1685.495256] xenbr0: port 2(vif3.0) entered disabled state Jun 30 08:24:44.317749 [ 1685.499647] device vif3.0 left promiscuous mode Jun 30 08:24:44.329711 [ 1685.504086] xenbr0: port 2(vif3.0) entered disabled state Jun 30 08:24:44.329774 [ 1711.203144] EXT4-fs (dm-2): unmounting filesystem. Jun 30 08:25:10.033661 [ 1712.417610] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 08:25:11.245751 [ 1712.559003] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Jun 30 08:25:11.389734 [ 1713.063268] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Jun 30 08:25:11.893774 [ 1713.080925] xvda: xvda1 xvda2 xvda3 < xvda5 > Jun 30 08:25:11.905710 [ 1720.589360] xenbr0: port 2(vif4.0) entered blocking state Jun 30 08:25:19.417757 [ 1720.593419] xenbr0: port 2(vif4.0) entered disabled state Jun 30 08:25:19.417809 [ 1720.599078] device vif4.0 entered promiscuous mode Jun 30 08:25:19.429651 (XEN) d4v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 08:25:23.620533 (XEN) d4v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 08:25:23.728523 (XEN) d4v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 08:25:23.776515 (XEN) common/grant_table.c:1909:d4v0 Expanding d4 grant table from 1 to 2 frames Jun 30 08:25:26.825833 (XEN) common/grant_table.c:1909:d4v0 Expanding d4 grant table from 2 to 3 frames Jun 30 08:25:26.825922 [ 1728.051175] vif vif-4-0 vif4.0: Guest Rx ready Jun 30 08:25:26.873693 [ 1728.054487] IPv6: ADDRCONF(NETDEV_CHANGE): vif4.0: link becomes ready Jun 30 08:25:26.885683 [ 1728.061550] xenbr0: port 2(vif4.0) entered blocking state Jun 30 08:25:26.897710 [ 1728.068932] xenbr0: port 2(vif4.0) entered forwarding state Jun 30 08:25:26.897773 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 08:25:36.548549 [ 1761.484991] xenbr0: port 2(vif4.0) entered disabled state Jun 30 08:26:00.309706 [ 1761.755288] xenbr0: port 2(vif4.0) entered disabled state Jun 30 08:26:00.585761 [ 1761.759724] device vif4.0 left promiscuous mode Jun 30 08:26:00.585823 [ 1761.763949] xenbr0: port 2(vif4.0) entered disabled state Jun 30 08:26:00.585871 [ 1787.530684] EXT4-fs (dm-2): unmounting filesystem. Jun 30 08:26:26.353683 [ 1788.765881] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 08:26:27.601638 [ 1788.907199] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Jun 30 08:26:27.733656 [ 1789.400780] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Jun 30 08:26:28.237649 [ 1789.418463] xvda: xvda1 xvda2 xvda3 < xvda5 > Jun 30 08:26:28.249608 [ 1797.141227] xenbr0: port 2(vif5.0) entered blocking state Jun 30 08:26:35.961789 [ 1797.145308] xenbr0: port 2(vif5.0) entered disabled state Jun 30 08:26:35.973734 [ 1797.150899] device vif5.0 entered promiscuous mode Jun 30 08:26:35.973795 (XEN) d5v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 08:26:40.173759 (XEN) d5v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 08:26:40.281681 (XEN) d5v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 08:26:40.329699 (XEN) common/grant_table.c:1909:d5v0 Expanding d5 grant table from 1 to 2 frames Jun 30 08:26:43.341744 (XEN) common/grant_table.c:1909:d5v0 Expanding d5 grant table from 2 to 3 frames Jun 30 08:26:43.341818 [ 1804.585655] vif vif-5-0 vif5.0: Guest Rx ready Jun 30 08:26:43.413718 [ 1804.588940] IPv6: ADDRCONF(NETDEV_CHANGE): vif5.0: link becomes ready Jun 30 08:26:43.413794 [ 1804.595406] xenbr0: port 2(vif5.0) entered blocking state Jun 30 08:26:43.425642 [ 1804.603990] xenbr0: port 2(vif5.0) entered forwarding state Jun 30 08:26:43.425699 [ 1838.267972] xenbr0: port 2(vif5.0) entered disabled state Jun 30 08:27:17.097793 [ 1838.465517] xenbr0: port 2(vif5.0) entered disabled state Jun 30 08:27:17.289802 [ 1838.469953] device vif5.0 left promiscuous mode Jun 30 08:27:17.301718 [ 1838.474169] xenbr0: port 2(vif5.0) entered disabled state Jun 30 08:27:17.301782 [ 1864.240741] EXT4-fs (dm-2): unmounting filesystem. Jun 30 08:27:43.068711 [ 1865.491974] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 08:27:44.316548 [ 1865.633367] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Jun 30 08:27:44.460583 [ 1866.135223] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Jun 30 08:27:44.964566 [ 1866.152294] xvda: xvda1 xvda2 xvda3 < xvda5 > Jun 30 08:27:44.976600 [ 1873.690511] xenbr0: port 2(vif6.0) entered blocking state Jun 30 08:27:52.509739 [ 1873.694551] xenbr0: port 2(vif6.0) entered disabled state Jun 30 08:27:52.521703 [ 1873.700250] device vif6.0 entered promiscuous mode Jun 30 08:27:52.521774 (XEN) d6v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 08:27:56.709541 (XEN) d6v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 08:27:56.817592 (XEN) d6v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 08:27:56.865576 (XEN) common/grant_table.c:1909:d6v0 Expanding d6 grant table from 1 to 2 frames Jun 30 08:27:59.877611 (XEN) common/grant_table.c:1909:d6v0 Expanding d6 grant table from 2 to 3 frames Jun 30 08:27:59.889608 [ 1881.123441] vif vif-6-0 vif6.0: Guest Rx ready Jun 30 08:27:59.949616 [ 1881.127362] IPv6: ADDRCONF(NETDEV_CHANGE): vif6.0: link becomes ready Jun 30 08:27:59.961605 [ 1881.134683] xenbr0: port 2(vif6.0) entered blocking state Jun 30 08:27:59.961605 [ 1881.142033] xenbr0: port 2(vif6.0) entered forwarding state Jun 30 08:27:59.973572 [ 1914.528068] xenbr0: port 2(vif6.0) entered disabled state Jun 30 08:28:33.353779 [ 1914.685697] xenbr0: port 2(vif6.0) entered disabled state Jun 30 08:28:33.509746 [ 1914.693333] device vif6.0 left promiscuous mode Jun 30 08:28:33.521651 [ 1914.696605] xenbr0: port 2(vif6.0) entered disabled state Jun 30 08:28:33.521717 [ 1940.348608] EXT4-fs (dm-2): unmounting filesystem. Jun 30 08:28:59.177601 [ 1941.573485] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 08:29:00.401633 [ 1941.714949] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Jun 30 08:29:00.549598 [ 1942.205137] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Jun 30 08:29:01.041793 [ 1942.236166] xvda: xvda1 xvda2 xvda3 < xvda5 > Jun 30 08:29:01.065715 [ 1949.799982] xenbr0: port 2(vif7.0) entered blocking state Jun 30 08:29:08.625793 [ 1949.804018] xenbr0: port 2(vif7.0) entered disabled state Jun 30 08:29:08.625835 [ 1949.809686] device vif7.0 entered promiscuous mode Jun 30 08:29:08.637695 (XEN) d7v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 08:29:12.817763 (XEN) d7v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 08:29:12.937679 (XEN) d7v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 08:29:12.973746 (XEN) common/grant_table.c:1909:d7v0 Expanding d7 grant table from 1 to 2 frames Jun 30 08:29:16.036572 (XEN) common/grant_table.c:1909:d7v0 Expanding d7 grant table from 2 to 3 frames Jun 30 08:29:16.048578 [ 1957.282867] vif vif-7-0 vif7.0: Guest Rx ready Jun 30 08:29:16.108604 [ 1957.286155] IPv6: ADDRCONF(NETDEV_CHANGE): vif7.0: link becomes ready Jun 30 08:29:16.120603 [ 1957.297321] xenbr0: port 2(vif7.0) entered blocking state Jun 30 08:29:16.120603 [ 1957.301585] xenbr0: port 2(vif7.0) entered forwarding state Jun 30 08:29:16.132568 [ 1990.296969] xenbr0: port 2(vif7.0) entered disabled state Jun 30 08:29:49.125693 [ 1990.545398] xenbr0: port 2(vif7.0) entered disabled state Jun 30 08:29:49.377741 [ 1990.549970] device vif7.0 left promiscuous mode Jun 30 08:29:49.377804 [ 1990.554052] xenbr0: port 2(vif7.0) entered disabled state Jun 30 08:29:49.377854 [ 2016.217524] EXT4-fs (dm-2): unmounting filesystem. Jun 30 08:30:15.045741 [ 2017.444087] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 08:30:16.269737 [ 2017.585495] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Jun 30 08:30:16.413746 [ 2018.067446] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Jun 30 08:30:16.905709 [ 2018.085354] xvda: xvda1 xvda2 xvda3 < xvda5 > Jun 30 08:30:16.905769 [ 2025.668440] xenbr0: port 2(vif8.0) entered blocking state Jun 30 08:30:24.489705 [ 2025.672496] xenbr0: port 2(vif8.0) entered disabled state Jun 30 08:30:24.501615 [ 2025.678168] device vif8.0 entered promiscuous mode Jun 30 08:30:24.501650 (XEN) d8v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 08:30:28.693739 (XEN) d8v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 08:30:28.801821 (XEN) d8v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 08:30:28.837817 (XEN) common/grant_table.c:1909:d8v1 Expanding d8 grant table from 1 to 2 frames Jun 30 08:30:31.865750 (XEN) common/grant_table.c:1909:d8v1 Expanding d8 grant table from 2 to 3 frames Jun 30 08:30:31.877657 [ 2033.123061] vif vif-8-0 vif8.0: Guest Rx ready Jun 30 08:30:31.949702 [ 2033.126213] IPv6: ADDRCONF(NETDEV_CHANGE): vif8.0: link becomes ready Jun 30 08:30:31.949739 [ 2033.133970] xenbr0: port 2(vif8.0) entered blocking state Jun 30 08:30:31.961690 [ 2033.140077] xenbr0: port 2(vif8.0) entered forwarding state Jun 30 08:30:31.961753 [ 2066.288601] xenbr0: port 2(vif8.0) entered disabled state Jun 30 08:31:05.109781 [ 2066.525266] xenbr0: port 2(vif8.0) entered disabled state Jun 30 08:31:05.349772 [ 2066.529630] device vif8.0 left promiscuous mode Jun 30 08:31:05.349833 [ 2066.533926] xenbr0: port 2(vif8.0) entered disabled state Jun 30 08:31:05.361704 [ 2092.201979] EXT4-fs (dm-2): unmounting filesystem. Jun 30 08:31:31.021741 [ 2093.425812] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 08:31:32.249827 [ 2093.567119] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Jun 30 08:31:32.393888 [ 2094.060518] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Jun 30 08:31:32.897749 [ 2094.077686] xvda: xvda1 xvda2 xvda3 < xvda5 > Jun 30 08:31:32.897759 [ 2101.723498] xenbr0: port 2(vif9.0) entered blocking state Jun 30 08:31:40.545794 [ 2101.727577] xenbr0: port 2(vif9.0) entered disabled state Jun 30 08:31:40.545864 [ 2101.733167] device vif9.0 entered promiscuous mode Jun 30 08:31:40.557723 (XEN) d9v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 08:31:44.741751 (XEN) d9v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 08:31:44.861709 (XEN) d9v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 08:31:44.897742 (XEN) common/grant_table.c:1909:d9v0 Expanding d9 grant table from 1 to 2 frames Jun 30 08:31:47.909800 (XEN) common/grant_table.c:1909:d9v0 Expanding d9 grant table from 2 to 3 frames Jun 30 08:31:47.909885 [ 2109.162907] vif vif-9-0 vif9.0: Guest Rx ready Jun 30 08:31:47.981748 [ 2109.166330] IPv6: ADDRCONF(NETDEV_CHANGE): vif9.0: link becomes ready Jun 30 08:31:47.993663 [ 2109.172937] xenbr0: port 2(vif9.0) entered blocking state Jun 30 08:31:47.993697 [ 2109.178017] xenbr0: port 2(vif9.0) entered forwarding state Jun 30 08:31:48.005686 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 08:32:17.397733 [ 2142.292994] xenbr0: port 2(vif9.0) entered disabled state Jun 30 08:32:21.117678 [ 2142.516267] xenbr0: port 2(vif9.0) entered disabled state Jun 30 08:32:21.333749 [ 2142.520779] device vif9.0 left promiscuous mode Jun 30 08:32:21.345747 [ 2142.524968] xenbr0: port 2(vif9.0) entered disabled state Jun 30 08:32:21.345810 [ 2168.118860] EXT4-fs (dm-2): unmounting filesystem. Jun 30 08:32:46.944655 [ 2169.362755] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 08:32:48.188572 [ 2169.504195] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Jun 30 08:32:48.332545 [ 2169.986047] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Jun 30 08:32:48.809785 [ 2170.003541] xvda: xvda1 xvda2 xvda3 < xvda5 > Jun 30 08:32:48.821677 [ 2177.528863] xenbr0: port 2(vif10.0) entered blocking state Jun 30 08:32:56.349786 [ 2177.532984] xenbr0: port 2(vif10.0) entered disabled state Jun 30 08:32:56.361737 [ 2177.538765] device vif10.0 entered promiscuous mode Jun 30 08:32:56.361798 (XEN) d10v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 08:33:00.553737 (XEN) d10v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 08:33:00.673669 (XEN) d10v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 08:33:00.709711 (XEN) common/grant_table.c:1909:d10v0 Expanding d10 grant table from 1 to 2 frames Jun 30 08:33:03.709792 (XEN) common/grant_table.c:1909:d10v0 Expanding d10 grant table from 2 to 3 frames Jun 30 08:33:03.721712 [ 2184.964434] vif vif-10-0 vif10.0: Guest Rx ready Jun 30 08:33:03.793747 [ 2184.968269] IPv6: ADDRCONF(NETDEV_CHANGE): vif10.0: link becomes ready Jun 30 08:33:03.793814 [ 2184.974490] xenbr0: port 2(vif10.0) entered blocking state Jun 30 08:33:03.805708 [ 2184.979992] xenbr0: port 2(vif10.0) entered forwarding state Jun 30 08:33:03.805771 [ 2218.122448] xenbr0: port 2(vif10.0) entered disabled state Jun 30 08:33:36.945767 [ 2218.345233] xenbr0: port 2(vif10.0) entered disabled state Jun 30 08:33:37.161742 [ 2218.349855] device vif10.0 left promiscuous mode Jun 30 08:33:37.173760 [ 2218.354048] xenbr0: port 2(vif10.0) entered disabled state Jun 30 08:33:37.173823 [ 2243.960327] EXT4-fs (dm-2): unmounting filesystem. Jun 30 08:34:02.788540 [ 2245.211383] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 08:34:04.033675 [ 2245.352507] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Jun 30 08:34:04.177780 [ 2245.837661] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Jun 30 08:34:04.669686 [ 2245.855284] xvda: xvda1 xvda2 xvda3 < xvda5 > Jun 30 08:34:04.669728 [ 2253.903922] xenbr0: port 2(vif11.0) entered blocking state Jun 30 08:34:12.725824 [ 2253.908072] xenbr0: port 2(vif11.0) entered disabled state Jun 30 08:34:12.725907 [ 2253.913772] device vif11.0 entered promiscuous mode Jun 30 08:34:12.737712 (XEN) d11v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 08:34:16.925743 (XEN) d11v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 08:34:17.045630 (XEN) d11v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 08:34:17.081664 (XEN) common/grant_table.c:1909:d11v0 Expanding d11 grant table from 1 to 2 frames Jun 30 08:34:20.069708 (XEN) common/grant_table.c:1909:d11v0 Expanding d11 grant table from 2 to 3 frames Jun 30 08:34:20.174041 [ 2261.323305] vif vif-11-0 vif11.0: Guest Rx ready Jun 30 08:34:20.174174 [ 2261.326691] IPv6: ADDRCONF(NETDEV_CHANGE): vif11.0: link becomes ready Jun 30 08:34:20.174205 [ 2261.333466] xenbr0: port 2(vif11.0) entered blocking state Jun 30 08:34:20.174232 [ 2261.338732] xenbr0: port 2(vif11.0) entered forwarding state Jun 30 08:34:20.174258 [ 2298.367756] xenbr0: port 2(vif11.0) entered disabled state Jun 30 08:34:57.192715 [ 2298.565316] xenbr0: port 2(vif11.0) entered disabled state Jun 30 08:34:57.384603 [ 2298.569766] device vif11.0 left promiscuous mode Jun 30 08:34:57.396619 [ 2298.574132] xenbr0: port 2(vif11.0) entered disabled state Jun 30 08:34:57.396619 [ 2324.280538] EXT4-fs (dm-2): unmounting filesystem. Jun 30 08:35:23.101693 [ 2325.515186] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 08:35:24.337647 [ 2325.656567] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Jun 30 08:35:24.481603 [ 2326.333802] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Jun 30 08:35:25.165595 [ 2326.354372] xvda: xvda1 xvda2 xvda3 < xvda5 > Jun 30 08:35:25.177641 [ 2333.950293] xenbr0: port 2(vif12.0) entered blocking state Jun 30 08:35:32.773829 [ 2333.954413] xenbr0: port 2(vif12.0) entered disabled state Jun 30 08:35:32.773907 [ 2333.960194] device vif12.0 entered promiscuous mode Jun 30 08:35:32.785692 (XEN) d12v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 08:35:36.980512 (XEN) d12v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 08:35:37.088539 (XEN) d12v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 08:35:37.124699 (XEN) common/grant_table.c:1909:d12v0 Expanding d12 grant table from 1 to 2 frames Jun 30 08:35:40.232536 (XEN) common/grant_table.c:1909:d12v0 Expanding d12 grant table from 2 to 3 frames Jun 30 08:35:40.232536 [ 2341.460051] vif vif-12-0 vif12.0: Guest Rx ready Jun 30 08:35:40.280591 [ 2341.464277] IPv6: ADDRCONF(NETDEV_CHANGE): vif12.0: link becomes ready Jun 30 08:35:40.292607 [ 2341.471325] xenbr0: port 2(vif12.0) entered blocking state Jun 30 08:35:40.292607 [ 2341.477180] xenbr0: port 2(vif12.0) entered forwarding state Jun 30 08:35:40.304538 [ 2374.582253] xenbr0: port 2(vif12.0) entered disabled state Jun 30 08:36:13.405755 [ 2374.775483] xenbr0: port 2(vif12.0) entered disabled state Jun 30 08:36:13.597777 [ 2374.780244] device vif12.0 left promiscuous mode Jun 30 08:36:13.597808 [ 2374.784295] xenbr0: port 2(vif12.0) entered disabled state Jun 30 08:36:13.609728 [ 2401.029612] EXT4-fs (dm-2): unmounting filesystem. Jun 30 08:36:39.845680 [ 2402.274552] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 08:36:41.093734 [ 2402.415991] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: disabled. Jun 30 08:36:41.237829 [ 2403.228987] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Jun 30 08:36:42.053756 [ 2403.310939] xvda: xvda1 xvda2 xvda3 < xvda5 > Jun 30 08:36:42.137651 [ 2410.796429] xenbr0: port 2(vif13.0) entered blocking state Jun 30 08:36:49.609784 [ 2410.800553] xenbr0: port 2(vif13.0) entered disabled state Jun 30 08:36:49.621657 [ 2410.806309] device vif13.0 entered promiscuous mode Jun 30 08:36:49.621690 (XEN) d13v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 08:36:53.809689 (XEN) d13v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 08:36:53.929634 (XEN) d13v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 08:36:53.965664 (XEN) common/grant_table.c:1909:d13v0 Expanding d13 grant table from 1 to 2 frames Jun 30 08:36:57.013688 (XEN) common/grant_table.c:1909:d13v0 Expanding d13 grant table from 2 to 3 frames Jun 30 08:36:57.013733 [ 2418.242936] vif vif-13-0 vif13.0: Guest Rx ready Jun 30 08:36:57.061684 [ 2418.246407] IPv6: ADDRCONF(NETDEV_CHANGE): vif13.0: link becomes ready Jun 30 08:36:57.073673 [ 2418.252969] xenbr0: port 2(vif13.0) entered blocking state Jun 30 08:36:57.073708 [ 2418.258400] xenbr0: port 2(vif13.0) entered forwarding state Jun 30 08:36:57.073735 [ 2449.669840] xenbr0: port 2(vif13.0) entered disabled state Jun 30 08:37:28.489792 [ 2449.825175] xenbr0: port 2(vif13.0) entered disabled state Jun 30 08:37:28.645714 [ 2449.829654] device vif13.0 left promiscuous mode Jun 30 08:37:28.645774 [ 2449.833988] xenbr0: port 2(vif13.0) entered disabled state Jun 30 08:37:28.657705 [ 2452.744380] EXT4-fs (dm-2): unmounting filesystem. Jun 30 08:37:31.561756 Jun 30 08:37:50.423873 (XEN) *** Serial input to Xen (type 'CTRL-x' three times to switch input) Jun 30 08:37:50.444546 Jun 30 08:37:50.445288 Jun 30 08:37:51.455611 (XEN) '0' pressed -> dumping Dom0's registers Jun 30 08:37:51.472654 (XEN) *** Dumping Dom0 vcpu#0 state: *** Jun 30 08:37:51.472686 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Not tain Jun 30 08:37:51.474896 ted ]---- Jun 30 08:37:51.483808 (XEN) CPU: 0 Jun 30 08:37:51.483825 (XEN) PC: c031ce28 Jun 30 08:37:51.483867 (XEN) CPSR: 600d0093 MODE:32-bit Guest SVC Jun 30 08:37:51.483867 (XEN) R0: 00000005 R1: 00000000 R2: 0075be61 R3: c031ce20 Jun 30 08:37:51.495086 (XEN) R4: c1909d80 R5: c1b12280 R6: c1904d1c R7: c1904d78 Jun 30 08:37:51.495165 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c80 Jun 30 08:37:51.508585 (XEN) USR: SP: bed01d04 LR: b6bcb169 Jun 30 08:37:51.508585 (XEN) SVC: SP: c1901f40 LR: c0308df0 SPSR:600d0013 Jun 30 08:37:51.508585 (XEN) ABT: SP: c1b22b10 LR: c03011c0 SPSR:600d0193 Jun 30 08:37:51.520684 (XEN) UND: SP: c1b22b20 LR: c0300fa0 SPSR:600f0093 Jun 30 08:37:51.520749 (XEN) IRQ: SP: c1b22b00 LR: c0300ba0 SPSR:600d0193 Jun 30 08:37:51.520796 (XEN) FIQ: SP: c1b22b30 LR: c1b22b30 SPSR:00000000 Jun 30 08:37:51.532595 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Jun 30 08:37:51.532595 (XEN) Jun 30 08:37:51.532595 (XEN) SCTLR: 10c5387d Jun 30 08:37:51.544592 (XEN) TCR: 00000000 Jun 30 08:37:51.544592 (XEN) TTBR0: 00000000717f406a Jun 30 08:37:51.544592 (XEN) TTBR1: 000000006020406a Jun 30 08:37:51.544592 (XEN) IFAR: b6e30eb8, IFSR: 00000007 Jun 30 08:37:51.556596 (XEN) DFAR: b6b21691, DFSR: 00000017 Jun 30 08:37:51.556596 (XEN) Jun 30 08:37:51.556596 (XEN) VTCR_EL2: 80003558 Jun 30 08:37:51.556596 (XEN) VTTBR_EL2: 00010000bef8a000 Jun 30 08:37:51.568597 (XEN) Jun 30 08:37:51.568597 (XEN) SCTLR_EL2: 30cd187f Jun 30 08:37:51.568597 (XEN) HCR_EL2: 007c663f Jun 30 08:37:51.568597 (XEN) TTBR0_EL2: 0000000041115000 Jun 30 08:37:51.568597 (XEN) Jun 30 08:37:51.568597 (XEN) ESR_EL2: 07e00000 Jun 30 08:37:51.580591 (XEN) HPFAR_EL2: 00104810 Jun 30 08:37:51.580591 (XEN) HDFAR: e0807f00 Jun 30 08:37:51.580591 (XEN) HIFAR: c141f6d0 Jun 30 08:37:51.580591 (XEN) Jun 30 08:37:51.580591 (XEN) Guest stack trace from sp=c1901f40: Jun 30 08:37:51.592594 (XEN) Failed to convert stack to physical address Jun 30 08:37:51.592594 (XEN) *** Dumping Dom0 vcpu#1 state: *** Jun 30 08:37:51.592594 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Not tainted ]---- Jun 30 08:37:51.604590 (XEN) CPU: 0 Jun 30 08:37:51.604590 (XEN) PC: c031ce28 Jun 30 08:37:51.604590 (XEN) CPSR: 60030093 MODE:32-bit Guest SVC Jun 30 08:37:51.604590 (XEN) R0: 00000005 R1: 00000000 R2: 00550981 R3: c031ce20 Jun 30 08:37:51.616591 (XEN) R4: c210e600 R5: c1b12280 R6: c1904d1c R7: c1904d78 Jun 30 08:37:51.616591 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c80 Jun 30 08:37:51.628598 (XEN) USR: SP: becc9948 LR: b6b4c853 Jun 30 08:37:51.628598 (XEN) SVC: SP: e08c9f90 LR: c0308df0 SPSR:60030013 Jun 30 08:37:51.628598 (XEN) ABT: SP: c1b22b50 LR: c0300ea0 SPSR:600f0193 Jun 30 08:37:51.640595 (XEN) UND: SP: c1b22b60 LR: c0300fa0 SPSR:60030093 Jun 30 08:37:51.640595 (XEN) IRQ: SP: c1b22b40 LR: c0300ba0 SPSR:60030193 Jun 30 08:37:51.652699 (XEN) FIQ: SP: c1b22b70 LR: c1b22b70 SPSR:00000000 Jun 30 08:37:51.652763 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Jun 30 08:37:51.652812 (XEN) Jun 30 08:37:51.664597 (XEN) SCTLR: 10c5387d Jun 30 08:37:51.664597 (XEN) TCR: 00000000 Jun 30 08:37:51.664597 (XEN) TTBR0: 00000000653fc06a Jun 30 08:37:51.664597 (XEN) TTBR1: 000000006020406a Jun 30 08:37:51.664597 (XEN) IFAR: b6eeb858, IFSR: 00000007 Jun 30 08:37:51.676598 (XEN) DFAR: 00536318, DFSR: 0000081f Jun 30 08:37:51.676598 (XEN) Jun 30 08:37:51.676598 (XEN) VTCR_EL2: 80003558 Jun 30 08:37:51.676598 (XEN) VTTBR_EL2: 00010000bef8a000 Jun 30 08:37:51.688557 (XEN) Jun 30 08:37:51.688557 (XEN) SCTLR_EL2: 30cd187f Jun 30 08:37:51.688557 (XEN) HCR_EL2: 007c663f Jun 30 08:37:51.688557 (XEN) TTBR0_EL2: 0000000041115000 Jun 30 08:37:51.688557 (XEN) Jun 30 08:37:51.688557 (XEN) ESR_EL2: 07e00000 Jun 30 08:37:51.700563 (XEN) HPFAR_EL2: 00104810 Jun 30 08:37:51.700563 (XEN) HDFAR: e0807f00 Jun 30 08:37:51.700563 (XEN) HIFAR: c141f6d0 Jun 30 08:37:51.700563 (XEN) Jun 30 08:37:51.700563 (XEN) Guest stack trace from sp=e08c9f90: Jun 30 08:37:51.712576 (XEN) Failed to convert stack to physical address Jun 30 08:37:51.712576 Jun 30 08:37:53.447670 (XEN) 'H' pressed -> dumping heap info (now = 2479931232166) Jun 30 08:37:53.472647 (XEN) heap[node=0][zone=0] -> 16280 pages Jun 30 08:37:53.472677 (XEN) heap[node=0][zone=1] -> 0 Jun 30 08:37:53.474969 pages Jun 30 08:37:53.483527 (XEN) heap[node=0][zone=2] -> 0 pages Jun 30 08:37:53.483527 (XEN) heap[node=0][zone=3] -> 0 pages Jun 30 08:37:53.483527 (XEN) heap[node=0][zone=4] -> 0 pages Jun 30 08:37:53.483527 (XEN) heap[node=0][zone=5] -> 0 pages Jun 30 08:37:53.494139 (XEN) heap[node=0][zone=6] -> 0 pages Jun 30 08:37:53.494213 (XEN) heap[node=0][zone=7] -> 0 pages Jun 30 08:37:53.494221 (XEN) heap[node=0][zone=8] -> 0 pages Jun 30 08:37:53.508587 (XEN) heap[node=0][zone=9] -> 0 pages Jun 30 08:37:53.508587 (XEN) heap[node=0][zone=10] -> 0 pages Jun 30 08:37:53.508587 (XEN) heap[node=0][zone=11] -> 0 pages Jun 30 08:37:53.508587 (XEN) heap[node=0][zone=12] -> 0 pages Jun 30 08:37:53.520580 (XEN) heap[node=0][zone=13] -> 0 pages Jun 30 08:37:53.520580 (XEN) heap[node=0][zone=14] -> 0 pages Jun 30 08:37:53.520580 (XEN) heap[node=0][zone=15] -> 0 pages Jun 30 08:37:53.532604 (XEN) heap[node=0][zone=16] -> 0 pages Jun 30 08:37:53.532604 (XEN) heap[node=0][zone=17] -> 0 pages Jun 30 08:37:53.532604 (XEN) heap[node=0][zone=18] -> 0 pages Jun 30 08:37:53.532604 (XEN) heap[node=0][zone=19] -> 130812 pages Jun 30 08:37:53.544592 (XEN) heap[node=0][zone=20] -> 241599 pages Jun 30 08:37:53.544592 (XEN) heap[node=0][zone=21] -> 0 pages Jun 30 08:37:53.544592 (XEN) heap[node=0][zone=22] -> 0 pages Jun 30 08:37:53.556594 (XEN) heap[node=0][zone=23] -> 0 pages Jun 30 08:37:53.556594 (XEN) heap[node=0][zone=24] -> 0 pages Jun 30 08:37:53.556594 (XEN) heap[node=0][zone=25] -> 0 pages Jun 30 08:37:53.568563 (XEN) heap[node=0][zone=26] -> 0 pages Jun 30 08:37:53.568563 (XEN) heap[node=0][zone=27] -> 0 pages Jun 30 08:37:53.568563 (XEN) heap[node=0][zone=28] -> 0 pages Jun 30 08:37:53.568563 Jun 30 08:37:55.453757 Jun 30 08:37:57.238816 Jun 30 08:37:57.454122 Jun 30 08:37:59.245256 Jun 30 08:37:59.494505 (XEN) Dumping timer queues: Jun 30 08:37:59.516779 (XEN) CPU00: Jun 30 08:37:59.516779 (XEN) ex= 233330us timer=43fdc968 cb=arch/arm/vtimer.c#virt_timer_expired(43fdc960) Jun 30 08:37:59.516779 (XEN) CPU01: Jun 30 08:37:59.516779 (XEN) ex= Jun 30 08:37:59.519643 81928us timer=43fef968 cb=arch/arm/vtimer.c#virt_timer_expired(43fef960) Jun 30 08:37:59.528641 Jun 30 08:38:01.498248 Jun 30 08:38:03.254363 Jun 30 08:38:03.485055 (XEN) 'd' pressed -> dumping registers Jun 30 08:38:03.505864 (XEN) Jun 30 08:38:03.505917 (XEN) *** Dumping CPU0 host state: *** Jun 30 08:38:03.505963 (XEN) ----[ Xen-4.19-unstable arm32 debug=y N Jun 30 08:38:03.508226 ot tainted ]---- Jun 30 08:38:03.521806 (XEN) CPU: 0 Jun 30 08:38:03.521860 (XEN) PC: 0026991c arch/arm/domain.c#idle_loop+0x134/0x1b0 Jun 30 08:38:03.521911 (XEN) CPSR: 6003005a MODE:Hypervisor Jun 30 08:38:03.521956 (XEN) R0: 00000000 R1: 002b6380 R2: 00000000 R3: 00000000 Jun 30 08:38:03.533720 (XEN) R4: 00000000 R5: 00308108 R6: 0033c33c R7: 00000001 Jun 30 08:38:03.533782 (XEN) R8: 00339108 R9: 00000000 R10:40e00000 R11:4003ff54 R12:fffffffc Jun 30 08:38:03.549746 (XEN) HYP: SP: 4003ff44 LR: 0022c434 Jun 30 08:38:03.549805 (XEN) Jun 30 08:38:03.549846 (XEN) VTCR_EL2: 80003558 Jun 30 08:38:03.549889 (XEN) VTTBR_EL2: 00010000bef8a000 Jun 30 08:38:03.549932 (XEN) Jun 30 08:38:03.549971 (XEN) SCTLR_EL2: 30cd187f Jun 30 08:38:03.550012 (XEN) HCR_EL2: 007c663f Jun 30 08:38:03.565740 (XEN) TTBR0_EL2: 0000000041115000 Jun 30 08:38:03.565799 (XEN) Jun 30 08:38:03.565839 (XEN) ESR_EL2: 07e00000 Jun 30 08:38:03.565882 (XEN) HPFAR_EL2: 00104810 Jun 30 08:38:03.565924 (XEN) HDFAR: e0807f00 Jun 30 08:38:03.565966 (XEN) HIFAR: c141f6d0 Jun 30 08:38:03.566008 (XEN) Jun 30 08:38:03.566047 (XEN) Xen stack trace from sp=4003ff44: Jun 30 08:38:03.577742 (XEN) 07e00000 002ac008 002a0f34 4003ff4c 002725d0 00000000 00000000 00000000 Jun 30 08:38:03.577807 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 08:38:03.589745 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 08:38:03.601740 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 08:38:03.601804 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 08:38:03.613734 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 08:38:03.613796 (XEN) Xen call trace: Jun 30 08:38:03.613839 (XEN) [<0026991c>] arch/arm/domain.c#idle_loop+0x134/0x1b0 (PC) Jun 30 08:38:03.625742 (XEN) [<0022c434>] rcu_needs_cpu+0x40/0x60 (LR) Jun 30 08:38:03.625803 (XEN) [<002725d0>] arch_get_xen_caps+0/0x90 Jun 30 08:38:03.637734 (XEN) Jun 30 08:38:03.637787 (XEN) *** Dumping CPU1 host state: *** Jun 30 08:38:03.637833 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Not tainted ]---- Jun 30 08:38:03.637883 (XEN) CPU: 1 Jun 30 08:38:03.649720 (XEN) PC: 0026991c arch/arm/domain.c#idle_loop+0x134/0x1b0 Jun 30 08:38:03.649783 (XEN) CPSR: 6001005a MODE:Hypervisor Jun 30 08:38:03.649867 (XEN) R0: 00000000 R1: 002b6380 R2: 3fcfe000 R3: 00000000 Jun 30 08:38:03.661742 (XEN) R4: 00000001 R5: 00308108 R6: 0033c33c R7: 00000002 Jun 30 08:38:03.661775 (XEN) R8: 00339108 R9: 00000001 R10:40e00000 R11:4000ff54 R12:fffffffc Jun 30 08:38:03.673679 (XEN) HYP: SP: 4000ff44 LR: 0022c434 Jun 30 08:38:03.673710 (XEN) Jun 30 08:38:03.673762 (XEN) VTCR_EL2: 80003558 Jun 30 08:38:03.673804 (XEN) VTTBR_EL2: 00010000bef8a000 Jun 30 08:38:03.685723 (XEN) Jun 30 08:38:03.685775 (XEN) SCTLR_EL2: 30cd187f Jun 30 08:38:03.685819 (XEN) HCR_EL2: 007c663f Jun 30 08:38:03.685861 (XEN) TTBR0_EL2: 00000000ba004000 Jun 30 08:38:03.685903 (XEN) Jun 30 08:38:03.685940 (XEN) ESR_EL2: 07e00000 Jun 30 08:38:03.697740 (XEN) HPFAR_EL2: 00104810 Jun 30 08:38:03.697796 (XEN) HDFAR: e0807f00 Jun 30 08:38:03.697839 (XEN) HIFAR: c0c09f04 Jun 30 08:38:03.697880 (XEN) Jun 30 08:38:03.697917 (XEN) Xen stack trace from sp=4000ff44: Jun 30 08:38:03.709743 (XEN) 07e00000 00309390 00000001 4000ff3c 00272eac 00000000 00000000 00000000 Jun 30 08:38:03.709806 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 08:38:03.721731 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 08:38:03.721793 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 08:38:03.733747 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 08:38:03.733809 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 08:38:03.745729 (XEN) Xen call trace: Jun 30 08:38:03.745759 (XEN) [<0026991c>] arch/arm/domain.c#idle_loop+0x134/0x1b0 (PC) Jun 30 08:38:03.757700 (XEN) [<0022c434>] rcu_needs_cpu+0x40/0x60 (LR) Jun 30 08:38:03.757733 (XEN) [<00272eac>] start_secondary+0x208/0x20c Jun 30 08:38:03.757758 (XEN) Jun 30 08:38:03.757779 Jun 30 08:38:05.498433 (XEN) 'e' pressed -> dumping event-channel info Jun 30 08:38:05.521771 (XEN) Event channel information for domain 0: Jun 30 08:38:05.521831 (XEN) Polling vCPUs: {} Jun 30 08:38:05.521874 (XEN) port Jun 30 08:38:05.524163 [p/m/s] Jun 30 08:38:05.533700 (XEN) 1 [0/0/ - ]: s=3 n=1 x=0 d=0 p=4 Jun 30 08:38:05.533757 (XEN) 2 [0/0/ - ]: s=5 n=0 x=0 v=2 Jun 30 08:38:05.533803 (XEN) 3 [0/0/ - ]: s=5 n=1 x=0 v=3 Jun 30 08:38:05.545711 (XEN) 4 [0/0/ - ]: s=3 n=0 x=0 d=0 p=1 Jun 30 08:38:05.545770 Jun 30 08:38:07.499437 (XEN) gnttab_usage_print_all [ key 'g' pressed Jun 30 08:38:07.521839 (XEN) -------- active -------- -------- shared -------- Jun 30 08:38:07.521903 (XEN) [ref] localdo Jun 30 08:38:07.523824 m mfn pin localdom gmfn flags Jun 30 08:38:07.533814 (XEN) grant-table for remote d0 (v1) Jun 30 08:38:07.533903 (XEN) 1 frames (64 max), 2 maptrack frames (1024 max) Jun 30 08:38:07.545786 (XEN) no active grant table entries Jun 30 08:38:07.545845 (XEN) gnttab_usage_print_all ] done Jun 30 08:38:07.545890 Jun 30 08:38:09.511778 Jun 30 08:38:11.268000 Jun 30 08:38:11.511935 (XEN) Physical memory information: Jun 30 08:38:11.529815 (XEN) Xen heap: 65120kB free Jun 30 08:38:11.529873 (XEN) heap[19]: 523248kB free Jun 30 08:38:11.529917 (XEN) heap[20]: 966396kB fr Jun 30 08:38:11.532199 ee Jun 30 08:38:11.541667 (XEN) Dom heap: 1489644kB free Jun 30 08:38:11.541723 Jun 30 08:38:13.515072 Jun 30 08:38:15.277599 Jun 30 08:38:15.522625 (XEN) sched_smt_power_savings: disabled Jun 30 08:38:15.541746 (XEN) NOW=2502000536041 Jun 30 08:38:15.541746 (XEN) Online Cpus: 0-1 Jun 30 08:38:15.541746 (XEN) Cpupool 0: Jun 30 08:38:15.541746 (XEN) Cpus: 0-1 Jun 30 08:38:15.541746 (XEN) Sched Jun 30 08:38:15.544022 uling granularity: cpu, 1 CPU per sched-resource Jun 30 08:38:15.553747 (XEN) Scheduler: SMP Credit Scheduler rev2 (credit2) Jun 30 08:38:15.553810 (XEN) Active queues: 1 Jun 30 08:38:15.553853 (XEN) default-weight = 256 Jun 30 08:38:15.565763 (XEN) Runqueue 0: Jun 30 08:38:15.565763 (XEN) ncpus = 2 Jun 30 08:38:15.565763 (XEN) cpus = 0-1 Jun 30 08:38:15.565763 (XEN) max_weight = 256 Jun 30 08:38:15.577689 (XEN) pick_bias = 0 Jun 30 08:38:15.577689 (XEN) instload = 0 Jun 30 08:38:15.577689 (XEN) aveload = 1256 (~0%) Jun 30 08:38:15.577689 (XEN) idlers: 2 Jun 30 08:38:15.577689 (XEN) tickled: 0 Jun 30 08:38:15.589748 (XEN) fully idle cores: 2 Jun 30 08:38:15.589811 (XEN) Domain info: Jun 30 08:38:15.589853 (XEN) Domain: 0 w 256 c 0 v 2 Jun 30 08:38:15.589896 (XEN) 1: [0.0] flags=0 cpu=0 credit=3559632 [w=256] load=1156 (~0%) Jun 30 08:38:15.601661 (XEN) 2: [0.1] flags=0 cpu=1 credit=9798083 [w=256] load=177 (~0%) Jun 30 08:38:15.601661 (XEN) Runqueue 0: Jun 30 08:38:15.601661 (XEN) CPU[00] runq=0, sibling={0}, core={0-1} Jun 30 08:38:15.613762 (XEN) CPU[01] runq=0, sibling={1}, core={0-1} Jun 30 08:38:15.613825 (XEN) RUNQ: Jun 30 08:38:15.613866 (XEN) CPUs info: Jun 30 08:38:15.613905 (XEN) CPU[00] current=d[IDLE]v0, curr=d[IDLE]v0, prev=NULL Jun 30 08:38:15.625707 (XEN) CPU[01] current=d[IDLE]v1, curr=d[IDLE]v1, prev=NULL Jun 30 08:38:15.625768 Jun 30 08:38:17.523449 Jun 30 08:38:19.286143 Jun 30 08:38:19.527770 (XEN) Synced stime skew: max=83ns avg=83ns samples=1 current=83ns Jun 30 08:38:19.553784 (XEN) Synced cycles skew: max=0 avg=0 samples=1 current=0 Jun 30 08:38:19.553846 Jun 30 08:38:19.555996 Jun 30 08:38:21.539949 Jun 30 08:38:23.294565 Jun 30 08:38:23.533981 Jun 30 08:38:25.301037 Jun 30 08:38:25.546976 Jun 30 08:38:27.308077 Jun 30 08:38:37.549184 (XEN) 'q' pressed -> dumping domain info (now = 2524034483166) Jun 30 08:38:37.576767 (XEN) General information for domain 0: Jun 30 08:38:37.576767 (XEN) refcnt=3 dying=0 pause_count=0 Jun 30 08:38:37.576767 (XE Jun 30 08:38:37.579321 N) nr_pages=131072 xenheap_pages=2 dirty_cpus={} max_pages=131072 Jun 30 08:38:37.588509 (XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=00000020 Jun 30 08:38:37.600582 (XEN) p2m mappings for domain 0 (vmid 1): Jun 30 08:38:37.600582 (XEN) 1G mappings: 0 (shattered 0) Jun 30 08:38:37.600582 (XEN) 2M mappings: 230 (shattered 26) Jun 30 08:38:37.600582 (XEN) 4K mappings: 5994 Jun 30 08:38:37.612584 (XEN) Rangesets belonging to domain 0: Jun 30 08:38:37.612584 (XEN) Interrupts { 32-72, 74, 77-79, 82-84, 86, 88-100, 103-104, 107-110, 114, 116-120, 123, 126-128, 138, 144, 146-147, 149-151, 156 } Jun 30 08:38:37.628607 (XEN) I/O Memory { 2020-2050, 3810-3811, 3830-3831, 3860-3861, 10000-10001, 10010-10045, 10050-10055, 10060-10061, 101b0-101b1, 101d0-101d1, 101e0-101e1, 10440-10441, 10800-10801, 10830-10831, 10850-10851, 10a60-10a61, 10d10-10d11, 11000-11010, 11200-11201, 11210-11211, 11400-11401, 11800-11805, 11c00-11c01, 11c10-11c11, 11d40-11d41, 11f20-11f21, 12000-12010, 12100-12101, 12110-12111, 12120-12121, 12130-12131, 12170-12171, 121a0-121a1, 121b0-121b1, 121d0-121d1, 12200-12201, 12210-12211, 12220-12221, 12230-12231, 12250-12251, 122f0-122f1, 12c00-12c01, 12c10-12c11, 12c30-12c31, 12c60-12c61, 12c70-12c71, 12c80-12c81, 12c90-12c91, 12ca0-12ca1, 12cb0-12cb1, 12cc0-12cc1, 12cd0-12cd1, 12ce0-12ce1, 12d10-12d11, 12d20-12d21, 12d30-12d31, 12d40-12d41, 12d60-12d61, 12d70-12d71, 12dd0-12dd1, 13260-13261, 13270-13271, 13280-13281, 13290-13291, 132a0-132a1, 132b0-132b1, 132c0-132c1, 132d0-132d1, 132e0-132e1, 132f0-132f1, 13400-13401, 13c40-13c41, 13c50-13c51, 13e00-13e01, 13e10-13e11, 13e20-13e21, 13e30-13e31, 13e80-13e81, 13e90-13e91, 13ea0-13ea1, 13eb0-13eb1, 14400-14440, 14450-14460, 14500-14510, 14530-145a0, 145b0-145b1, 14640-14641, 14650-14651 } Jun 30 08:38:37.724584 (XEN) NODE affinity for domain 0: [0] Jun 30 08:38:37.724584 (XEN) VCPU information and callbacks for domain 0: Jun 30 08:38:37.736604 (XEN) UNIT0 affinities: hard={0-1} soft={0-1} Jun 30 08:38:37.736604 (XEN) VCPU0: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Jun 30 08:38:37.748589 (XEN) pause_count=0 pause_flags=1 Jun 30 08:38:37.748589 (XEN) GICH_LRs (vcpu 0) mask=0 Jun 30 08:38:37.748589 (XEN) VCPU_LR[0]=0 Jun 30 08:38:37.748589 (XEN) VCPU_LR[1]=0 Jun 30 08:38:37.748589 (XEN) VCPU_LR[2]=0 Jun 30 08:38:37.760590 (XEN) VCPU_LR[3]=0 Jun 30 08:38:37.760590 (XEN) No periodic timer Jun 30 08:38:37.760590 (XEN) UNIT1 affinities: hard={0-1} soft={0-1} Jun 30 08:38:37.760590 (XEN) VCPU1: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Jun 30 08:38:37.772734 (XEN) pause_count=0 pause_flags=1 Jun 30 08:38:37.772797 (XEN) GICH_LRs (vcpu 1) mask=0 Jun 30 08:38:37.772841 (XEN) VCPU_LR[0]=0 Jun 30 08:38:37.772881 (XEN) VCPU_LR[1]=0 Jun 30 08:38:37.784677 (XEN) VCPU_LR[2]=0 Jun 30 08:38:37.784733 (XEN) VCPU_LR[3]=0 Jun 30 08:38:37.784774 (XEN) No periodic timer Jun 30 08:38:37.784815 (XEN) Notifying guest 0:0 (virq 1, port 0) Jun 30 08:38:37.784860 (XEN) Notifying guest 0:1 (virq 1, port 0) Jun 30 08:38:37.796529 Jun 30 08:38:49.558843 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 30 08:38:49.577836 Jun 30 08:38:49.577889 arndale-metrocentre login: Jun 30 08:38:49.579811 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 08:38:58.520741 [ 2617.895237] sd 0:0:0:0: [sda] Synchronizing SCSI cache Jun 30 08:40:16.716549 [ 2617.904261] wake enabled for irq 119 (gpx1-4) Jun 30 08:40:16.728584 [ 2617.907295] wake enabled for irq 120 (gpx1-5) Jun 30 08:40:16.728584 [ 2617.911681] wake enabled for irq 121 (gpx1-6) Jun 30 08:40:16.728584 [ 2617.916142] wake enabled for irq 122 (gpx1-7) Jun 30 08:40:16.739915 [ 2617.920535] wake enabled for irq 123 (gpx2-0) Jun 30 08:40:16.739915 [ 2617.924992] wake enabled for irq 124 (gpx2-1) Jun 30 08:40:16.739915 [ 2617.929810] reboot: Resô Jun 30 08:40:17.084537 Jun 30 08:40:17.084537 Jun 30 08:40:17.084537 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 08:40:17.084537 Jun 30 08:40:17.084537 CPU: Exynos5250@1000MHz Jun 30 08:40:17.084537 Jun 30 08:40:17.084537 Board: Arndale Jun 30 08:40:17.096526 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 08:40:17.096526 ready Jun 30 08:40:17.096526 DRAM: 2 GiB Jun 30 08:40:17.096526 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 08:40:17.120529 trace: enabled Jun 30 08:40:17.156529 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 08:40:17.516542 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 08:40:17.564556 In: serial Jun 30 08:40:17.576581 Out: serial Jun 30 08:40:17.576581 Err: serial Jun 30 08:40:17.576581 SCSI: ARNDALE SCSI INIT Jun 30 08:40:17.576581 Target spinup took 0 ms. Jun 30 08:40:17.576581 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 08:40:17.588609 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 08:40:17.588609 Net: Net Initialization Skipped Jun 30 08:40:17.600561 No ethernet found. Jun 30 08:40:17.600561 Hostname: arndale-metrocentre Jun 30 08:40:17.600561 Hit any key to stop autoboot: 2  1  0 Jun 30 08:40:19.513706 (Re)start USB... Jun 30 08:40:19.525735 USB0: USB EHCI 1.00 Jun 30 08:40:19.525789 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 08:40:25.121836 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 08:40:25.133723 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 08:40:25.577735 Waiting for Ethernet connection... done. Jun 30 08:40:27.220472 BOOTP broadcast 1 Jun 30 08:40:27.220472 BOOTP broadcast 2 Jun 30 08:40:30.957807 DHCP client bound to address 10.149.64.44 (3888 ms) Jun 30 08:40:30.957851 Using asx0 device Jun 30 08:40:30.957874 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 08:40:30.969754 Filename 'pxelinux.0'. Jun 30 08:40:30.969785 Load address: 0x43e00000 Jun 30 08:40:30.969808 Loading: *### Jun 30 08:40:30.981720 2.2 MiB/s Jun 30 08:40:30.981750 done Jun 30 08:40:30.981771 Bytes transferred = 42430 (a5be hex) Jun 30 08:40:30.993788 missing environment variable: pxeuuid Jun 30 08:40:30.993820 Retrieving file: pxelinux.cfg/0A95402C Jun 30 08:40:30.993844 Using asx0 device Jun 30 08:40:30.993866 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 08:40:31.005787 Filename 'pxelinux.cfg/0A95402C'. Jun 30 08:40:31.005830 Load address: 0x51000000 Jun 30 08:40:31.005857 Loading: *# Jun 30 08:40:31.005879 358.4 KiB/s Jun 30 08:40:31.017777 done Jun 30 08:40:31.017814 Bytes transferred = 734 (2de hex) Jun 30 08:40:31.017850 Config file found Jun 30 08:40:31.017885 Ignoring unknown command: serial Jun 30 08:40:31.017921 1: ^Overwrite Jun 30 08:40:31.017956 Retrieving file: /osstest/tmp//arndale-metrocentre--initrd.gz Jun 30 08:40:31.029755 Using asx0 device Jun 30 08:40:31.029785 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 08:40:31.029812 Filename '/osstest/tmp//arndale-metrocentre--initrd.gz'. Jun 30 08:40:31.041767 Load address: 0x43300000 Jun 30 08:40:31.041797 Loading: *################################################################# Jun 30 08:40:31.365714 ################################################################# Jun 30 08:40:31.689632 ################################################################# Jun 30 08:40:31.993659 ################################################################# Jun 30 08:40:32.313641 ################################################################# Jun 30 08:40:32.637631 ################################################################# Jun 30 08:40:32.949630 ################################################################# Jun 30 08:40:33.213653 ################################################################# Jun 30 08:40:33.513622 ################################################################# Jun 30 08:40:33.825759 ################################################################# Jun 30 08:40:34.125720 ################################################################# Jun 30 08:40:34.449694 ################################################################# Jun 30 08:40:34.773688 ################################################################# Jun 30 08:40:35.085714 ################################################################# Jun 30 08:40:35.409713 ################################################################# Jun 30 08:40:35.745712 ################################################################# Jun 30 08:40:36.045638 ################################################################# Jun 30 08:40:36.297631 ################################################################# Jun 30 08:40:36.561703 ################################################################# Jun 30 08:40:36.861641 ################################################################# Jun 30 08:40:37.153616 ################################################################# Jun 30 08:40:37.405740 ################################################################# Jun 30 08:40:37.657708 ################################################################# Jun 30 08:40:37.897632 ################################################################# Jun 30 08:40:38.149630 ################################################################# Jun 30 08:40:38.413635 ################################################################# Jun 30 08:40:38.665726 ################################################################# Jun 30 08:40:38.917692 ###################################### Jun 30 08:40:39.049625 3 MiB/s Jun 30 08:40:39.061668 done Jun 30 08:40:39.061696 Bytes transferred = 26310348 (19176cc hex) Jun 30 08:40:39.061721 Retrieving file: /osstest/debian-installer/armhf/2024-03-26-bookworm/linux Jun 30 08:40:39.073716 Using asx0 device Jun 30 08:40:39.073746 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 08:40:39.085693 Filename '/osstest/debian-installer/armhf/2024-03-26-bookworm/linux'. Jun 30 08:40:39.085756 Load address: 0x42000000 Jun 30 08:40:39.085798 Loading: *################################################################# Jun 30 08:40:39.413546 ################################################################# Jun 30 08:40:39.689641 ################################################################# Jun 30 08:40:40.013641 ################################################################# Jun 30 08:40:40.337638 ################################################################# Jun 30 08:40:40.673631 ############################################# Jun 30 08:40:40.901708 2.7 MiB/s Jun 30 08:40:40.901746 done Jun 30 08:40:40.901769 Bytes transferred = 5423616 (52c200 hex) Jun 30 08:40:40.901794 append: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-metrocentre url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=40387 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-metrocentre--initrd.gz --- console=ttySAC2,115200n8 Jun 30 08:40:40.949708 Retrieving file: /osstest/debian-installer/armhf/2024-03-26-bookworm/dtbs/exynos5250-arndale.dtb Jun 30 08:40:40.949746 Using asx0 device Jun 30 08:40:40.949769 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 08:40:40.961708 Filename '/osstest/debian-installer/armhf/2024-03-26-bookworm/dtbs/exynos5250-arndale.dtb'. Jun 30 08:40:40.973660 Load address: 0x43000000 Jun 30 08:40:40.973722 Loading: *#### Jun 30 08:40:40.985652 2.3 MiB/s Jun 30 08:40:40.985706 done Jun 30 08:40:40.985745 Bytes transferred = 46686 (b65e hex) Jun 30 08:40:40.997698 Kernel image @ 0x42000000 [ 0x000000 - 0x52c200 ] Jun 30 08:40:40.997730 ## Flattened Device Tree blob at 43000000 Jun 30 08:40:40.997755 Booting using the fdt blob at 0x43000000 Jun 30 08:40:41.009668 Loading Ramdisk to 4e6e8000, end 4ffff6cc ... OK Jun 30 08:40:41.429680 Loading Device Tree to 4e6d9000, end 4e6e765d ... OK Jun 30 08:40:41.429754 Jun 30 08:40:41.441651 Starting kernel ...(fake run for tracing) Jun 30 08:40:41.441705 Jun 30 08:40:41.441744 Jun 30 08:40:41.453642 Starting kernel ... Jun 30 08:40:41.453691 Jun 30 08:40:41.453730 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 08:40:47.561755 [ 0.000000] Linux version 6.1.0-18-armmp (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.76-1 (2024-02-01) Jun 30 08:40:47.573743 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 30 08:40:47.585734 [ 0.000000] CPU: div instructions available: patching division code Jun 30 08:40:47.585798 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 08:40:47.597683 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 08:40:47.597739 [ 0.000000] Memory policy: Data cache writealloc Jun 30 08:40:47.609725 [ 0.000000] efi: UEFI not found. Jun 30 08:40:47.609756 [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 Jun 30 08:40:47.609782 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 08:40:47.621708 [ 0.000000] Zone ranges: Jun 30 08:40:47.621764 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Jun 30 08:40:47.633708 [ 0.000000] Normal empty Jun 30 08:40:47.633761 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Jun 30 08:40:47.633810 [ 0.000000] Movable zone start for each node Jun 30 08:40:47.645709 [ 0.000000] Early memory node ranges Jun 30 08:40:47.645769 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 08:40:47.645816 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 08:40:47.657731 [ 0.000000] percpu: Embedded 18 pages/cpu s41620 r8192 d23916 u73728 Jun 30 08:40:47.669704 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Jun 30 08:40:47.669764 [ 0.000000] Kernel command line: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-metrocentre url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=40387 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-metrocentre--initrd.gz --- console=ttySAC2,115200n8 Jun 30 08:40:47.717677 [ 0.000000] Unknown kernel command line parameters "preseed --- vga=normal auto=true hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=40387 domain=test-lab.xenproject.org", will be passed to user space. Jun 30 08:40:47.753733 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Jun 30 08:40:47.765670 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 08:40:47.765707 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Jun 30 08:40:47.777735 [ 0.000000] Memory: 2015996K/2097152K available (11264K kernel code, 1696K rwdata, 3716K rodata, 2048K init, 378K bss, 64772K reserved, 16384K cma-reserved, 1294332K highmem) Jun 30 08:40:47.789717 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 08:40:47.801712 [ 0.000000] ftrace: allocating 39582 entries in 117 pages Jun 30 08:40:47.801745 [ 0.000000] ftrace: allocated 116 pages with 4 groups Jun 30 08:40:47.813711 [ 0.000000] trace event string verifier disabled Jun 30 08:40:47.813743 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 08:40:47.813769 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Jun 30 08:40:47.825715 [ 0.000000] Rude variant of Tasks RCU enabled. Jun 30 08:40:47.825748 [ 0.000000] Tracing variant of Tasks RCU enabled. Jun 30 08:40:47.837708 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Jun 30 08:40:47.837745 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 08:40:47.849709 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 08:40:47.849743 [ 0.000000] GIC: Using split EOI/Deactivate mode Jun 30 08:40:47.861705 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 08:40:47.861740 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 08:40:47.873711 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Jun 30 08:40:47.873775 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Jun 30 08:40:47.885740 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Jun 30 08:40:47.897726 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Jun 30 08:40:47.897763 [ 0.002632] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Jun 30 08:40:47.909705 [ 0.002646] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 08:40:47.921705 [ 0.002661] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 08:40:47.921777 [ 0.002673] Ignoring duplicate/late registration of read_current_timer delay Jun 30 08:40:47.933713 [ 0.003039] Console: colour dummy device 80x30 Jun 30 08:40:47.933770 [ 0.003081] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Jun 30 08:40:47.945720 [ 0.003094] CPU: Testing write buffer coherency: ok Jun 30 08:40:47.957705 [ 0.003135] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 08:40:47.957773 [ 0.003143] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 08:40:47.969710 [ 0.003149] pid_max: default: 32768 minimum: 301 Jun 30 08:40:47.969771 [ 0.003506] LSM: Security Framework initializing Jun 30 08:40:47.981706 [ 0.003577] landlock: Up and running. Jun 30 08:40:47.981770 [ 0.003582] Yama: disabled by default; enable with sysctl kernel.yama.* Jun 30 08:40:47.993723 [ 0.003770] AppArmor: AppArmor initialized Jun 30 08:40:47.993782 [ 0.003781] TOMOYO Linux initialized Jun 30 08:40:47.993827 [ 0.003823] LSM support for eBPF active Jun 30 08:40:47.993872 [ 0.004066] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 08:40:48.005736 [ 0.004080] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 08:40:48.017710 [ 0.005520] /cpus/cpu@0 missing clock-frequency property Jun 30 08:40:48.017768 [ 0.005546] /cpus/cpu@1 missing clock-frequency property Jun 30 08:40:48.029704 [ 0.005559] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 08:40:48.029766 [ 0.006509] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 08:40:48.041714 [ 0.006516] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 08:40:48.041779 [ 0.006622] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 08:40:48.053721 [ 0.006627] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 08:40:48.053790 [ 0.006773] Setting up static identity map for 0x40300000 - 0x403000ac Jun 30 08:40:48.065713 [ 0.007940] rcu: Hierarchical SRCU implementation. Jun 30 08:40:48.065779 [ 0.007946] rcu: Max phase no-delay instances is 1000. Jun 30 08:40:48.077713 [ 0.010090] EFI services will not be available. Jun 30 08:40:48.077777 [ 0.010443] smp: Bringing up secondary CPUs ... Jun 30 08:40:48.077824 [ 0.011189] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 08:40:48.089709 [ 0.011201] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 08:40:48.101711 [ 0.011334] smp: Brought up 1 node, 2 CPUs Jun 30 08:40:48.101743 [ 0.011343] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 08:40:48.113712 [ 0.011351] CPU: All CPU(s) started in HYP mode. Jun 30 08:40:48.113745 [ 0.011354] CPU: Virtualization extensions available. Jun 30 08:40:48.113771 [ 0.012018] devtmpfs: initialized Jun 30 08:40:48.125712 [ 0.023040] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 08:40:48.125750 [ 0.023292] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Jun 30 08:40:48.137726 [ 0.023316] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 08:40:48.149708 [ 0.023806] pinctrl core: initialized pinctrl subsystem Jun 30 08:40:48.149752 [ 0.024535] DMI not present or invalid. Jun 30 08:40:48.149779 [ 0.025212] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 08:40:48.161707 [ 0.030568] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 08:40:48.161742 [ 0.032121] audit: initializing netlink subsys (disabled) Jun 30 08:40:48.173715 [ 0.032326] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 Jun 30 08:40:48.185706 [ 0.033500] thermal_sys: Registered thermal governor 'fair_share' Jun 30 08:40:48.185740 [ 0.033507] thermal_sys: Registered thermal governor 'bang_bang' Jun 30 08:40:48.197704 [ 0.033512] thermal_sys: Registered thermal governor 'step_wise' Jun 30 08:40:48.197739 [ 0.033516] thermal_sys: Registered thermal governor 'user_space' Jun 30 08:40:48.209702 [ 0.033520] thermal_sys: Registered thermal governor 'power_allocator' Jun 30 08:40:48.209737 [ 0.033890] No ATAGs? Jun 30 08:40:48.209760 [ 0.033957] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jun 30 08:40:48.221711 [ 0.033965] hw-breakpoint: maximum watchpoint size is 8 bytes. Jun 30 08:40:48.221745 [ 0.035057] Serial: AMBA PL011 UART driver Jun 30 08:40:48.233710 [ 0.091448] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Jun 30 08:40:48.233748 [ 0.102463] iommu: Default domain type: Translated Jun 30 08:40:48.245684 [ 0.102471] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 08:40:48.245715 [ 0.103460] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Jun 30 08:40:48.257684 [ 0.104025] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 08:40:48.257728 [ 0.104036] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 08:40:48.269680 [ 0.104681] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 08:40:48.281704 [ 0.104711] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 08:40:48.281774 [ 0.104893] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 08:40:48.293713 [ 0.105252] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 08:40:48.293779 [ 0.105262] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 08:40:48.305711 [ 0.105655] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 08:40:48.305774 [ 0.105947] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 08:40:48.305821 [ 0.105957] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 08:40:48.317712 [ 0.106233] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 08:40:48.317782 [ 0.106333] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 08:40:48.329713 [ 0.106342] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 08:40:48.329777 [ 0.106538] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 08:40:48.341709 [ 0.106736] pps_core: LinuxPPS API ver. 1 registered Jun 30 08:40:48.341774 [ 0.106741] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 08:40:48.353718 [ 0.106757] PTP clock support registered Jun 30 08:40:48.353784 [ 0.108251] NetLabel: Initializing Jun 30 08:40:48.365707 [ 0.108257] NetLabel: domain hash size = 128 Jun 30 08:40:48.365776 [ 0.108262] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Jun 30 08:40:48.365825 [ 0.108335] NetLabel: unlabeled traffic allowed by default Jun 30 08:40:48.377717 [ 0.108495] vgaarb: loaded Jun 30 08:40:48.377776 [ 0.109166] clocksource: Switched to clocksource mct-frc Jun 30 08:40:48.377824 [ 0.178165] VFS: Disk quotas dquot_6.6.0 Jun 30 08:40:48.389723 [ 0.178258] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jun 30 08:40:48.389759 [ 0.178994] AppArmor: AppArmor Filesystem Enabled Jun 30 08:40:48.401794 [ 0.188054] NET: Registered PF_INET protocol family Jun 30 08:40:48.401827 [ 0.188266] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Jun 30 08:40:48.413805 [ 0.189902] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 08:40:48.413855 [ 0.189993] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 08:40:48.425785 [ 0.190017] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Jun 30 08:40:48.437788 [ 0.190112] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Jun 30 08:40:48.437825 [ 0.190341] TCP: Hash tables configured (established 8192 bind 8192) Jun 30 08:40:48.449802 [ 0.190564] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Jun 30 08:40:48.461783 [ 0.190650] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 08:40:48.461819 [ 0.190690] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 08:40:48.473794 [ 0.190889] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 08:40:48.473828 [ 0.190923] NET: Registered PF_XDP protocol family Jun 30 08:40:48.485789 [ 0.190934] PCI: CLS 0 bytes, default 64 Jun 30 08:40:48.485823 [ 0.191452] Trying to unpack rootfs image as initramfs... Jun 30 08:40:48.485849 [ 0.191870] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Jun 30 08:40:48.497788 [ 0.192073] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Jun 30 08:40:48.509794 [ 0.193693] Initialise system trusted keyrings Jun 30 08:40:48.509826 [ 0.193767] Key type blacklist registered Jun 30 08:40:48.509850 [ 0.193998] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Jun 30 08:40:48.521791 [ 0.201245] zbud: loaded Jun 30 08:40:48.521821 [ 0.202289] integrity: Platform Keyring initialized Jun 30 08:40:48.521847 [ 0.202317] integrity: Machine keyring initialized Jun 30 08:40:48.533800 [ 0.202325] Key type asymmetric registered Jun 30 08:40:48.533832 [ 0.202332] Asymmetric key parser 'x509' registered Jun 30 08:40:48.545796 [ 1.564776] Freeing initrd memory: 25696K Jun 30 08:40:48.545828 [ 1.576612] alg: self-tests for CTR-KDF (hmac(sha256)) passed Jun 30 08:40:48.545855 [ 1.576895] bounce: pool size: 64 pages Jun 30 08:40:48.557789 [ 1.577058] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Jun 30 08:40:48.557827 [ 1.577261] io scheduler mq-deadline registered Jun 30 08:40:48.569713 [ 1.582402] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Jun 30 08:40:48.569752 [ 1.603305] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 08:40:48.581796 [ 1.603317] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 08:40:48.593799 [ 1.605678] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 08:40:48.593836 [ 1.605688] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 08:40:48.605800 [ 1.606477] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 08:40:48.617798 [ 1.606485] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 08:40:48.629794 [ 1.607312] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 08:40:48.629832 [ 1.607321] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 08:40:48.641793 [ 1.609695] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 08:40:48.653800 [ 1.612478] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 08:40:48.653834 [ 1.615232] Serial: AMBA driver Jun 30 08:40:48.665795 [ 1.615481] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 08:40:48.665834 [ 1.615973] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 08:40:48.677802 [ 1.616418] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 08:40:48.689803 [ 2.747315] printk: console [ttySAC2] enabled Jun 30 08:40:48.689836 [ 2.752124] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Jun 30 08:40:48.701770 [ 2.762825] STM32 USART driver initialized Jun 30 08:40:48.701802 [ 2.776989] mousedev: PS/2 mouse device common for all mice Jun 30 08:40:48.725566 [ 2.808187] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 08:40:48.749653 [ 2.816814] s5m-rtc s5m-rtc: setting system clock to 2024-06-30T08:34:50 UTC (1719736490) Jun 30 08:40:48.761707 [ 2.826722] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Jun 30 08:40:48.773700 [ 2.834202] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 08:40:48.773769 [ 2.842175] NET: Registered PF_INET6 protocol family Jun 30 08:40:48.785665 [ 2.855900] Segment Routing with IPv6 Jun 30 08:40:48.797698 [ 2.858188] In-situ OAM (IOAM) with IPv6 Jun 30 08:40:48.797757 [ 2.862091] mip6: Mobile IPv6 Jun 30 08:40:48.809703 [ 2.864957] NET: Registered PF_PACKET protocol family Jun 30 08:40:48.809761 [ 2.870147] mpls_gso: MPLS GSO support Jun 30 08:40:48.809807 [ 2.874360] ThumbEE CPU extension supported. Jun 30 08:40:48.821705 [ 2.877992] Registering SWP/SWPB emulation handler Jun 30 08:40:48.821773 [ 2.883269] registered taskstats version 1 Jun 30 08:40:48.821819 [ 2.886868] Loading compiled-in X.509 certificates Jun 30 08:40:48.833662 [ 3.343640] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Jun 30 08:40:49.289709 [ 3.350977] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Jun 30 08:40:49.301726 [ 3.361985] zswap: loaded using pool lzo/zbud Jun 30 08:40:49.301793 [ 3.365977] Key type .fscrypt registered Jun 30 08:40:49.313653 [ 3.369283] Key type fscrypt-provisioning registered Jun 30 08:40:49.313686 [ 3.383133] Key type encrypted registered Jun 30 08:40:49.325717 [ 3.385699] AppArmor: AppArmor sha1 policy hashing enabled Jun 30 08:40:49.325750 [ 3.391180] ima: No TPM chip found, activating TPM-bypass! Jun 30 08:40:49.337777 [ 3.396623] ima: Allocated hash algorithm: sha256 Jun 30 08:40:49.337834 [ 3.401334] ima: No architecture policies found Jun 30 08:40:49.349716 [ 3.405876] evm: Initialising EVM extended attributes: Jun 30 08:40:49.349750 [ 3.410940] evm: security.selinux Jun 30 08:40:49.349774 [ 3.414235] evm: security.SMACK64 (disabled) Jun 30 08:40:49.361694 [ 3.418488] evm: security.SMACK64EXEC (disabled) Jun 30 08:40:49.361727 [ 3.423089] evm: security.SMACK64TRANSMUTE (disabled) Jun 30 08:40:49.361753 [ 3.428124] evm: security.SMACK64MMAP (disabled) Jun 30 08:40:49.373718 [ 3.432723] evm: security.apparmor Jun 30 08:40:49.373749 [ 3.436108] evm: security.ima Jun 30 08:40:49.373773 [ 3.439060] evm: security.capability Jun 30 08:40:49.385658 [ 3.442625] evm: HMAC attrs: 0x1 Jun 30 08:40:49.385689 [ 4.025389] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 08:40:49.973658 [ 4.051752] Freeing unused kernel image (initmem) memory: 2048K Jun 30 08:40:49.997715 [ 4.056618] Checked W+X mappings: passed, no W+X pages found Jun 30 08:40:49.997749 [ 4.061874] Run /init as init process Jun 30 08:40:50.009601 [ 4.605512] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 08:40:50.549679 [ 4.688168] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 08:40:50.633698 [ 4.708223] usbcore: registered new interface driver usbfs Jun 30 08:40:50.657713 [ 4.713227] usbcore: registered new interface driver hub Jun 30 08:40:50.657748 [ 4.713926] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 08:40:50.669673 [ 4.717631] usbcore: registered new device driver usb Jun 30 08:40:50.669706 [ 4.763543] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 08:40:50.705701 [ 4.773078] phy phy-12130000.phy.1: phy_power_on was called before phy_init Jun 30 08:40:50.717750 [ 4.780815] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 08:40:50.729641 [ 4.800838] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Jun 30 08:40:50.741689 [ 4.859084] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Jun 30 08:40:50.801674 [ 4.869540] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 08:40:50.813713 [ 4.909526] usb3503 usb-hub: switched to HUB mode Jun 30 08:40:50.849699 [ 4.912787] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 08:40:50.861684 [ 4.915456] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 08:40:50.861751 [ 4.941284] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 08:40:50.885752 [ 4.948120] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 08:40:50.897721 [ 4.955328] usb usb1: Product: EHCI Host Controller Jun 30 08:40:50.897782 [ 4.960169] usb usb1: Manufacturer: Linux 6.1.0-18-armmp ehci_hcd Jun 30 08:40:50.909676 [ 4.966244] usb usb1: SerialNumber: 12110000.usb Jun 30 08:40:50.909747 [ 5.039642] hub 1-0:1.0: USB hub found Jun 30 08:40:50.981672 [ 5.047028] hub 1-0:1.0: 3 ports detected Jun 30 08:40:50.993646 [ 5.061329] phy phy-12130000.phy.1: phy_power_on was called before phy_init Jun 30 08:40:51.005715 [ 5.068631] exynos-ohci 12120000.usb: USB Host Controller Jun 30 08:40:51.017698 [ 5.073008] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Jun 30 08:40:51.017736 [ 5.080734] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Jun 30 08:40:51.029645 [ 5.149381] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Jun 30 08:40:51.089699 [ 5.156205] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 08:40:51.101716 [ 5.163399] usb usb2: Product: USB Host Controller Jun 30 08:40:51.101748 [ 5.168173] usb usb2: Manufacturer: Linux 6.1.0-18-armmp ohci_hcd Jun 30 08:40:51.113704 [ 5.174260] usb usb2: SerialNumber: 12120000.usb Jun 30 08:40:51.113736 [ 5.186391] hub 2-0:1.0: USB hub found Jun 30 08:40:51.125680 [ 5.188800] hub 2-0:1.0: 3 ports detected Jun 30 08:40:51.137660 [ 5.247162] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 08:40:51.185680 [ 5.251228] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 08:40:51.197723 [ 5.259473] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 Jun 30 08:40:51.209709 [ 5.268266] xhci-hcd xhci-hcd.2.auto: irq 108, io mem 0x12000000 Jun 30 08:40:51.209774 [ 5.274504] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 08:40:51.221710 [ 5.279682] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 08:40:51.221775 [ 5.287319] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 08:40:51.233714 [ 5.293974] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 08:40:51.245711 [ 5.302078] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 08:40:51.245782 [ 5.309276] usb usb3: Product: xHCI Host Controller Jun 30 08:40:51.257721 [ 5.314130] usb usb3: Manufacturer: Linux 6.1.0-18-armmp xhci-hcd Jun 30 08:40:51.257792 [ 5.320211] usb usb3: SerialNumber: xhci-hcd.2.auto Jun 30 08:40:51.269704 [ 5.325082] usb 1-3: new high-speed USB device number 2 using exynos-ehci Jun 30 08:40:51.269738 [ 5.332508] hub 3-0:1.0: USB hub found Jun 30 08:40:51.269762 [ 5.335616] hub 3-0:1.0: 1 port detected Jun 30 08:40:51.281715 [ 5.339970] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 08:40:51.281789 [ 5.347707] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Jun 30 08:40:51.293716 [ 5.355807] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 08:40:51.305711 [ 5.363011] usb usb4: Product: xHCI Host Controller Jun 30 08:40:51.305794 [ 5.367862] usb usb4: Manufacturer: Linux 6.1.0-18-armmp xhci-hcd Jun 30 08:40:51.317721 [ 5.373936] usb usb4: SerialNumber: xhci-hcd.2.auto Jun 30 08:40:51.317788 [ 5.379444] hub 4-0:1.0: USB hub found Jun 30 08:40:51.317833 [ 5.382572] hub 4-0:1.0: 1 port detected Jun 30 08:40:51.329646 [ 5.485719] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Jun 30 08:40:51.437702 [ 5.492533] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jun 30 08:40:51.437738 [ 5.502549] hub 1-3:1.0: USB hub found Jun 30 08:40:51.449655 [ 5.511833] hub 1-3:1.0: 3 ports detected Jun 30 08:40:51.449688 Starting system log daemon: syslogd, klogd. Jun 30 08:40:51.485654 /var/run/utmp: No such file or directory Jun 30 08:40:53.345708 [?1h=(B   Jun 30 08:40:53.381732  Jun 30 08:40:53.393710 [  (-*) ][ Jun 30  8:34 ] Jun 30 08:40:53.405704 [  (0*start) ][ Jun 30  8:34 ] Jun 30 08:40:53.417717 [  (0*start) ][ Jun 30  8:34 ] Jun 30 08:40:53.429717 [  (0*start) ][ Jun 30  8:34 ] Jun 30 08:40:53.441718 [  (0*start) ][ Jun 30  8:34 ]                        [  (0*start) ][ Jun 30  8:34 ][  (0*start) ][ Jun 30  8:34 ] Jun 30 08:40:53.501719 [ 0- start  (2*shell) ][ Jun 30  8:34 ] Jun 30 08:40:53.513720 [ 0- start  (2*shell) ][ Jun 30  8:34 ] Jun 30 08:40:53.525716 [ 0- start  (2*shell) ][ Jun 30  8:34 ] Jun 30 08:40:53.549711 [ 0- start  (2*shell) ][ Jun 30  8:34 ]                        [ 0- start  (2*shell) ][ Jun 30  8:34 ][ 0- start  (2*shell) ][ Jun 30  8:34 ] Jun 30 08:40:53.597706 [ 0 start 2- shell  (3*shell) ][ Jun 30  8:34 ] Jun 30 08:40:53.609737 [ 0 start 2- shell  (3*shell) ][ Jun 30  8:34 ] Jun 30 08:40:53.633727 [ 0 start 2- shell  (3*shell) ][ Jun 30  8:34 ] Jun 30 08:40:53.645704 [ 0 start 2- shell  (3*shell) ][ Jun 30  8:34 ]                        [ 0 start 2- shell  (3*shell) ][ Jun 30  8:34 ][ 0 start 2- shell  (3*shell) ][ Jun 30  8:34 ] Jun 30 08:40:53.693715 [ 0 start 2 shell 3- shell  (4*log) ][ Jun 30  8:34 ] Jun 30 08:40:53.717703 [ 0 start 2 shell 3- shell  (4*log) ][ Jun 30  8:34 ] Jun 30 08:40:53.729711 [ 0 start 2 shell 3- shell  (4*log) ][ Jun 30  8:34 ] Jun 30 08:40:53.741691 [ 0 start 2 shell 3- shell  (4*log) ][ Jun 30  8:34 ]                        [ 0 start 2 shell 3- shell  (4*log) ][ Jun 30  8:34 ][ 0 start 2 shell 3- shell  (4*log) ][ Jun 30  8:34 ] Jun 30 08:40:53.801709 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30  8:34 ] Jun 30 08:40:53.813710 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30  8:34 ] Jun 30 08:40:53.825713 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30  8:34 ] Jun 30 08:40:53.837715 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30  8:34 ]                        [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30  8:34 ][ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30  8:34 ] Jun 30 08:40:53.897709 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  8:34 ] Jun 30 08:40:53.909714 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  8:34 ] Jun 30 08:40:53.921656 [  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  8:34 ] Jun 30 08:40:54.377666 Detecting network hardware ... 2%... 95%... 100% Jun 30 08:40:56.112518 [  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  8:35 ] Jun 30 08:40:58.368572 Jun 30 08:40:58.368759 Detecting link on eth0; please wait... ... 0%... 10%... 20% Jun 30 08:41:01.024517 Waiting for link-local address... ... 8%... 16%... 25%... 33%... 41%... 50%... 100% Jun 30 08:41:02.576533 Attempting IPv6 autoconfiguration... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 75%... 83%... 91%... 100% Jun 30 08:41:08.640712 Configuring the network with DHCP ... 0%... 100% Jun 30 08:41:11.797683 Checking the Debian archive mirror ... 25%... 50%... 75%... 100% Jun 30 08:41:20.081623 Loading additional components ... 0%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Jun 30 08:41:54.101717 Setting up the clock ... 0%... 3%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  8:41 ]... 100% Jun 30 08:41:56.905732 Loading additional components ... 50%... 100% Jun 30 08:41:58.585710 Detecting disks and all other hardware [  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  8:42 ]... 2%... 95%... 100% Jun 30 08:42:02.749681 Loading additional components ... 5%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Jun 30 08:42:11.649787 Loading additional components ... 25%... 50%... 75%... 100% Jun 30 08:42:14.053778 Starting up the partitioner ... 4%... 13%... 21%... 30%... 43%... 52%... 60%... 73%... 82%... 91%... 100% Jun 30 08:42:25.188523 Guided partitioning ... 16%... 33%... 50%... 66%... 83%... 100% Jun 30 08:42:33.629669 Starting up the partitioner ... 4%... 12%... 20%... 32%... 40%... 52%... 60%... 72%... 80%... 92%... 100% Jun 30 08:42:43.649624 Partitions formatting ... 33% Jun 30 08:42:52.349645 Partitions formatting [  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  8:43 ] Partitions formatting Installing the base system ... 0%... 17%... 20%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  8:44 ]... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  8:45 ]... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  8:46 ]... 48%... 50%...  Jun 30 08:46:55.021752  60%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  8:47 ]... 70%... 79%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  8:48 ]... 83%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  8:49 ][  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  8:50 ]... 91%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  8:51 ]... 100% Jun 30 08:51:23.621702 Configuring apt ... 7%... 14%... 14%... 21%... 35%... 42%... 50%... 60%... 71%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  8:52 ]. Jun 30 08:52:01.192680 ... 82%... 92%... 100% Jun 30 08:52:03.837732 Select and install software ... 1%... 10%... 13%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  8:53 ]... 20%... 30%... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  8:54 ]... 50%... Jun 30 08:54:51.625743 . 60%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  8:55 ]... 70%... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  8:56 ]... 88%... 90%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  8:57 ]... 94%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  8:58 ]... 100% Jun 30 08:58:02.297725 Finishing the installation ... 4%... 12%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  8:59 ]... 16%... 20%... 32%... 40%... 44%... Jun 30 08:59:50.393856  52%... 60%... 72%... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  9:00 ]... 92% The system is going down NOW! Jun 30 09:00:00.400520 Sent SIGTERM to all processes Jun 30 09:00:00.400520 [? Sent SIGKILL to all processes Jun 30 09:00:01.396542 Requesting system reboot Jun 30 09:00:01.396542 [ 1156.490723] reboot: Re˙ Jun 30 09:00:02.756548 Jun 30 09:00:02.756548 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 09:00:02.768593 Jun 30 09:00:02.768593 CPU: Exynos5250@1000MHz Jun 30 09:00:02.768593 Jun 30 09:00:02.768593 Board: Arndale Jun 30 09:00:02.768593 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 09:00:02.768593 ready Jun 30 09:00:02.768593 DRAM: 2 GiB Jun 30 09:00:02.768593 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 09:00:02.792512 trace: enabled Jun 30 09:00:02.828523 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 09:00:03.192524 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 09:00:03.252562 In: serial Jun 30 09:00:03.252562 Out: serial Jun 30 09:00:03.252562 Err: serial Jun 30 09:00:03.252562 SCSI: ARNDALE SCSI INIT Jun 30 09:00:03.252562 Target spinup took 0 ms. Jun 30 09:00:03.264587 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 09:00:03.264587 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 09:00:03.264587 Net: Net Initialization Skipped Jun 30 09:00:03.276579 No ethernet found. Jun 30 09:00:03.276579 Hostname: arndale-metrocentre Jun 30 09:00:03.276579 Hit any key to stop autoboot: 2  1  0 Jun 30 09:00:05.204467 (Re)start USB... Jun 30 09:00:05.204467 USB0: USB EHCI 1.00 Jun 30 09:00:05.204467 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 09:00:10.800557 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 09:00:10.812566 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 09:00:11.256772 Waiting for Ethernet connection... done. Jun 30 09:00:12.852700 BOOTP broadcast 1 Jun 30 09:00:12.852777 BOOTP broadcast 2 Jun 30 09:00:14.264606 DHCP client bound to address 10.149.64.44 (1469 ms) Jun 30 09:00:14.264606 Using asx0 device Jun 30 09:00:14.264606 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 09:00:14.276148 Filename 'pxelinux.0'. Jun 30 09:00:14.276148 Load address: 0x43e00000 Jun 30 09:00:14.276148 Loading: *### Jun 30 09:00:14.300598 2.2 MiB/s Jun 30 09:00:14.300756 done Jun 30 09:00:14.300795 Bytes transferred = 42430 (a5be hex) Jun 30 09:00:14.300856 missing environment variable: pxeuuid Jun 30 09:00:14.300856 Retrieving file: pxelinux.cfg/0A95402C Jun 30 09:00:14.300856 Using asx0 device Jun 30 09:00:14.312597 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 09:00:14.312597 Filename 'pxelinux.cfg/0A95402C'. Jun 30 09:00:14.312597 Load address: 0x51000000 Jun 30 09:00:14.324605 Loading: *# Jun 30 09:00:14.324605 63.5 KiB/s Jun 30 09:00:14.324605 done Jun 30 09:00:14.324605 Bytes transferred = 65 (41 hex) Jun 30 09:00:14.324605 Config file found Jun 30 09:00:14.324605 Ignoring unknown command: serial Jun 30 09:00:14.324605 1: local Jun 30 09:00:14.324605 scanning bus for devices... Jun 30 09:00:14.336556 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 09:00:14.348585 Type: Hard Disk Jun 30 09:00:14.348585 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 09:00:14.348585 Found 1 device(s). Jun 30 09:00:14.348585 Jun 30 09:00:14.360595 SCSI device 0: Jun 30 09:00:14.360595 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 09:00:14.360595 Type: Hard Disk Jun 30 09:00:14.360595 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 09:00:14.372567 ... is now current device Jun 30 09:00:14.372768 Scanning scsi 0... Jun 30 09:00:14.372778 Found U-Boot script /boot.scr Jun 30 09:00:14.492542 641 bytes read in 36 ms (16.6 KiB/s) Jun 30 09:00:14.532589 ## Executing script at 50000000 Jun 30 09:00:14.532589 Loading dtbs/exynos5250-arndale.dtb Jun 30 09:00:14.532589 46686 bytes read in 96 ms (474.6 KiB/s) Jun 30 09:00:14.640550 Loading vmlinuz-6.1.0-22-armmp-lpae Jun 30 09:00:14.652537 5505536 bytes read in 200 ms (26.3 MiB/s) Jun 30 09:00:14.868570 Loading initrd.img-6.1.0-22-armmp-lpae Jun 30 09:00:14.868570 25720907 bytes read in 1894 ms (13 MiB/s) Jun 30 09:00:16.717839 Booting Jun 30 09:00:16.717916 Kernel image @ 0x42000000 [ 0x000000 - 0x540200 ] Jun 30 09:00:16.717955 ## Flattened Device Tree blob at 43000000 Jun 30 09:00:16.729721 Booting using the fdt blob at 0x43000000 Jun 30 09:00:16.729780 Loading Ramdisk to 4e778000, end 4ffff84b ... OK Jun 30 09:00:17.137685 Loading Device Tree to 4e769000, end 4e77765d ... OK Jun 30 09:00:17.149719 Jun 30 09:00:17.149771 Starting kernel ...(fake run for tracing) Jun 30 09:00:17.161735 Jun 30 09:00:17.161788 Jun 30 09:00:17.161827 Starting kernel ... Jun 30 09:00:17.161869 Jun 30 09:00:17.161907 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 09:00:23.317780 [ 0.000000] Linux version 6.1.0-22-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.94-1 (2024-06-21) Jun 30 09:00:23.329776 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=30c5387d Jun 30 09:00:23.341786 [ 0.000000] CPU: div instructions available: patching division code Jun 30 09:00:23.353793 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 09:00:23.353801 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 09:00:23.365783 [ 0.000000] Memory policy: Data cache writealloc Jun 30 09:00:23.365823 [ 0.000000] efi: UEFI not found. Jun 30 09:00:23.365869 [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000 Jun 30 09:00:23.377794 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 09:00:23.377811 [ 0.000000] Zone ranges: Jun 30 09:00:23.377856 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Jun 30 09:00:23.389781 [ 0.000000] Normal empty Jun 30 09:00:23.389812 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Jun 30 09:00:23.401786 [ 0.000000] Movable zone start for each node Jun 30 09:00:23.401794 [ 0.000000] Early memory node ranges Jun 30 09:00:23.401840 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 09:00:23.413790 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 09:00:23.413812 [ 0.000000] percpu: Embedded 18 pages/cpu s44756 r8192 d20780 u73728 Jun 30 09:00:23.425780 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Jun 30 09:00:23.437793 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=ttySAC2,115200n8 Jun 30 09:00:23.437842 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Jun 30 09:00:23.449778 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 09:00:23.461794 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Jun 30 09:00:23.461804 [ 0.000000] Memory: 2015520K/2097152K available (12288K kernel code, 1714K rwdata, 3748K rodata, 2048K init, 382K bss, 65248K reserved, 16384K cma-reserved, 1294332K highmem) Jun 30 09:00:23.485782 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 09:00:23.485807 [ 0.000000] ftrace: allocating 39982 entries in 118 pages Jun 30 09:00:23.497794 [ 0.000000] ftrace: allocated 118 pages with 5 groups Jun 30 09:00:23.497798 [ 0.000000] trace event string verifier disabled Jun 30 09:00:23.497846 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 09:00:23.509793 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Jun 30 09:00:23.509809 [ 0.000000] Rude variant of Tasks RCU enabled. Jun 30 09:00:23.521790 [ 0.000000] Tracing variant of Tasks RCU enabled. Jun 30 09:00:23.521808 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Jun 30 09:00:23.533794 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 09:00:23.533821 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 09:00:23.545788 [ 0.000000] GIC: Using split EOI/Deactivate mode Jun 30 09:00:23.545793 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 09:00:23.557788 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 09:00:23.557808 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Jun 30 09:00:23.569791 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Jun 30 09:00:23.569806 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Jun 30 09:00:23.581790 [ 0.000019] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Jun 30 09:00:23.593781 [ 0.002633] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Jun 30 09:00:23.593815 [ 0.002647] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 09:00:23.605769 [ 0.002662] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 09:00:23.617895 [ 0.002674] Ignoring duplicate/late registration of read_current_timer delay Jun 30 09:00:23.617895 [ 0.003038] Console: colour dummy device 80x30 Jun 30 09:00:23.629791 [ 0.003078] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Jun 30 09:00:23.641791 [ 0.003092] CPU: Testing write buffer coherency: ok Jun 30 09:00:23.641802 [ 0.003134] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 09:00:23.653788 [ 0.003142] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 09:00:23.653812 [ 0.003149] pid_max: default: 32768 minimum: 301 Jun 30 09:00:23.665791 [ 0.003506] LSM: Security Framework initializing Jun 30 09:00:23.665806 [ 0.003576] landlock: Up and running. Jun 30 09:00:23.665853 [ 0.003581] Yama: disabled by default; enable with sysctl kernel.yama.* Jun 30 09:00:23.677784 [ 0.003764] AppArmor: AppArmor initialized Jun 30 09:00:23.677820 [ 0.003777] TOMOYO Linux initialized Jun 30 09:00:23.689790 [ 0.003822] LSM support for eBPF active Jun 30 09:00:23.689802 [ 0.004067] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 09:00:23.689860 [ 0.004081] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 09:00:23.701790 [ 0.005489] /cpus/cpu@0 missing clock-frequency property Jun 30 09:00:23.713791 [ 0.005517] /cpus/cpu@1 missing clock-frequency property Jun 30 09:00:23.713819 [ 0.005531] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 09:00:23.713869 [ 0.006477] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 09:00:23.725777 [ 0.006484] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 09:00:23.737920 [ 0.006586] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 09:00:23.737991 [ 0.006592] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 09:00:23.749790 [ 0.006731] Setting up static identity map for 0x40400000 - 0x404000ac Jun 30 09:00:23.749807 [ 0.007888] rcu: Hierarchical SRCU implementation. Jun 30 09:00:23.761802 [ 0.007893] rcu: Max phase no-delay instances is 1000. Jun 30 09:00:23.761822 [ 0.010024] EFI services will not be available. Jun 30 09:00:23.761870 [ 0.010366] smp: Bringing up secondary CPUs ... Jun 30 09:00:23.773792 [ 0.011108] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 09:00:23.773811 [ 0.011120] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 09:00:23.785790 [ 0.011251] smp: Brought up 1 node, 2 CPUs Jun 30 09:00:23.785819 [ 0.011260] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 09:00:23.797789 [ 0.011268] CPU: All CPU(s) started in HYP mode. Jun 30 09:00:23.797799 [ 0.011272] CPU: Virtualization extensions available. Jun 30 09:00:23.809757 [ 0.012150] devtmpfs: initialized Jun 30 09:00:23.809812 [ 0.023018] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 09:00:23.821759 [ 0.023252] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Jun 30 09:00:23.821794 [ 0.023277] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 09:00:23.833744 [ 0.023816] pinctrl core: initialized pinctrl subsystem Jun 30 09:00:23.833744 [ 0.024567] DMI not present or invalid. Jun 30 09:00:23.845788 [ 0.025244] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 09:00:23.845802 [ 0.026785] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 09:00:23.857792 [ 0.028282] audit: initializing netlink subsys (disabled) Jun 30 09:00:23.857811 [ 0.028486] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 Jun 30 09:00:23.869732 [ 0.029670] thermal_sys: Registered thermal governor 'fair_share' Jun 30 09:00:23.869766 [ 0.029677] thermal_sys: Registered thermal governor 'bang_bang' Jun 30 09:00:23.881795 [ 0.029681] thermal_sys: Registered thermal governor 'step_wise' Jun 30 09:00:23.881833 [ 0.029686] thermal_sys: Registered thermal governor 'user_space' Jun 30 09:00:23.893791 [ 0.029690] thermal_sys: Registered thermal governor 'power_allocator' Jun 30 09:00:23.893821 [ 0.029889] No ATAGs? Jun 30 09:00:23.905796 [ 0.029956] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jun 30 09:00:23.905808 [ 0.029964] hw-breakpoint: maximum watchpoint size is 8 bytes. Jun 30 09:00:23.917742 [ 0.031054] Serial: AMBA PL011 UART driver Jun 30 09:00:23.917742 [ 0.080509] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 30 09:00:23.929863 [ 0.087379] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Jun 30 09:00:23.941731 [ 0.091809] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages Jun 30 09:00:23.941731 [ 0.091818] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page Jun 30 09:00:23.953788 [ 0.098666] iommu: Default domain type: Translated Jun 30 09:00:23.953788 [ 0.098674] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 09:00:23.965780 [ 0.099644] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Jun 30 09:00:23.965786 [ 0.100175] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 09:00:23.965835 [ 0.100186] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 09:00:23.977788 [ 0.100819] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 09:00:23.989791 [ 0.100849] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 09:00:23.989816 [ 0.101052] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 09:00:24.001791 [ 0.101409] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 09:00:24.001794 [ 0.101419] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 09:00:24.013874 [ 0.101803] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 09:00:24.013874 [ 0.102096] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 09:00:24.025789 [ 0.102105] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 09:00:24.025806 [ 0.102399] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 09:00:24.025855 [ 0.102515] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 09:00:24.037781 [ 0.102524] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 09:00:24.037813 [ 0.102705] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 09:00:24.049768 [ 0.102924] pps_core: LinuxPPS API ver. 1 registered Jun 30 09:00:24.049786 [ 0.102930] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 09:00:24.061782 [ 0.102946] PTP clock support registered Jun 30 09:00:24.061782 [ 0.104477] NetLabel: Initializing Jun 30 09:00:24.073778 [ 0.104483] NetLabel: domain hash size = 128 Jun 30 09:00:24.073804 [ 0.104489] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Jun 30 09:00:24.073855 [ 0.104543] NetLabel: unlabeled traffic allowed by default Jun 30 09:00:24.085790 [ 0.104713] vgaarb: loaded Jun 30 09:00:24.085799 [ 0.105202] clocksource: Switched to clocksource mct-frc Jun 30 09:00:24.097870 [ 0.105777] VFS: Disk quotas dquot_6.6.0 Jun 30 09:00:24.097870 [ 0.105864] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jun 30 09:00:24.097870 [ 0.106628] AppArmor: AppArmor Filesystem Enabled Jun 30 09:00:24.109794 [ 0.116543] NET: Registered PF_INET protocol family Jun 30 09:00:24.109812 [ 0.116739] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Jun 30 09:00:24.121791 [ 0.118221] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 09:00:24.133776 [ 0.118324] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 09:00:24.133776 [ 0.118349] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Jun 30 09:00:24.145790 [ 0.118448] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Jun 30 09:00:24.145824 [ 0.118679] TCP: Hash tables configured (established 8192 bind 8192) Jun 30 09:00:24.157789 [ 0.118920] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Jun 30 09:00:24.169926 [ 0.119018] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 09:00:24.169991 [ 0.119059] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 09:00:24.181764 [ 0.119281] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 09:00:24.181764 [ 0.119317] NET: Registered PF_XDP protocol family Jun 30 09:00:24.193793 [ 0.119327] PCI: CLS 0 bytes, default 64 Jun 30 09:00:24.193793 [ 0.119819] Trying to unpack rootfs image as initramfs... Jun 30 09:00:24.193842 [ 0.120182] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Jun 30 09:00:24.205792 [ 0.125567] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Jun 30 09:00:24.217773 [ 0.190021] Initialise system trusted keyrings Jun 30 09:00:24.217781 [ 0.190086] Key type blacklist registered Jun 30 09:00:24.217844 [ 0.191314] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Jun 30 09:00:24.229791 [ 0.199242] zbud: loaded Jun 30 09:00:24.229802 [ 0.201476] integrity: Platform Keyring initialized Jun 30 09:00:24.241711 [ 0.201508] integrity: Machine keyring initialized Jun 30 09:00:24.241711 [ 0.201518] Key type asymmetric registered Jun 30 09:00:24.241712 [ 0.201526] Asymmetric key parser 'x509' registered Jun 30 09:00:24.253901 [ 1.426598] Freeing initrd memory: 25120K Jun 30 09:00:24.253962 [ 1.449028] alg: self-tests for CTR-KDF (hmac(sha256)) passed Jun 30 09:00:24.254013 [ 1.449372] bounce: pool size: 64 pages Jun 30 09:00:24.265792 [ 1.449558] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Jun 30 09:00:24.265820 [ 1.449721] io scheduler mq-deadline registered Jun 30 09:00:24.277790 [ 1.454815] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Jun 30 09:00:24.289778 [ 1.475792] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 09:00:24.289807 [ 1.475804] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 09:00:24.301790 [ 1.478147] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 09:00:24.313783 [ 1.478157] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 09:00:24.313817 [ 1.478973] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 09:00:24.325793 [ 1.478983] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 09:00:24.337790 [ 1.479797] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 09:00:24.337809 [ 1.479805] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 09:00:24.349797 [ 1.482186] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 09:00:24.361804 [ 1.484970] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 09:00:24.361837 [ 1.487739] Serial: AMBA driver Jun 30 09:00:24.373796 [ 1.487964] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 09:00:24.373820 [ 1.488439] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 09:00:24.385776 [ 1.488903] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 09:00:24.397798 [ 2.569717] printk: console [ttySAC2] enabled Jun 30 09:00:24.397817 [ 2.574549] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Jun 30 09:00:24.409775 [ 2.585180] STM32 USART driver initialized Jun 30 09:00:24.409809 [ 2.599566] mousedev: PS/2 mouse device common for all mice Jun 30 09:00:24.433732 [ 2.630795] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 09:00:24.457749 [ 2.639424] s5m-rtc s5m-rtc: setting system clock to 2024-06-30T09:00:24 UTC (1719738024) Jun 30 09:00:24.469783 [ 2.649285] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Jun 30 09:00:24.481787 [ 2.656752] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 09:00:24.481801 [ 2.664715] NET: Registered PF_INET6 protocol family Jun 30 09:00:24.493746 [ 2.688783] Segment Routing with IPv6 Jun 30 09:00:24.517742 [ 2.691059] In-situ OAM (IOAM) with IPv6 Jun 30 09:00:24.517802 [ 2.694992] mip6: Mobile IPv6 Jun 30 09:00:24.529790 [ 2.697865] NET: Registered PF_PACKET protocol family Jun 30 09:00:24.529798 [ 2.703014] mpls_gso: MPLS GSO support Jun 30 09:00:24.529846 [ 2.707050] ThumbEE CPU extension supported. Jun 30 09:00:24.541781 [ 2.710888] Registering SWP/SWPB emulation handler Jun 30 09:00:24.541806 [ 2.716106] registered taskstats version 1 Jun 30 09:00:24.541853 [ 2.719754] Loading compiled-in X.509 certificates Jun 30 09:00:24.553737 [ 3.180486] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Jun 30 09:00:25.009783 [ 3.187825] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Jun 30 09:00:25.021795 [ 3.198903] zswap: loaded using pool lzo/zbud Jun 30 09:00:25.033778 [ 3.202826] Key type .fscrypt registered Jun 30 09:00:25.033778 [ 3.206159] Key type fscrypt-provisioning registered Jun 30 09:00:25.033778 [ 3.230318] Key type encrypted registered Jun 30 09:00:25.057760 [ 3.232860] AppArmor: AppArmor sha1 policy hashing enabled Jun 30 09:00:25.069794 [ 3.238399] ima: No TPM chip found, activating TPM-bypass! Jun 30 09:00:25.069797 [ 3.243847] ima: Allocated hash algorithm: sha256 Jun 30 09:00:25.069846 [ 3.248576] ima: No architecture policies found Jun 30 09:00:25.081780 [ 3.253067] evm: Initialising EVM extended attributes: Jun 30 09:00:25.081821 [ 3.258136] evm: security.selinux Jun 30 09:00:25.081867 [ 3.261427] evm: security.SMACK64 (disabled) Jun 30 09:00:25.093785 [ 3.265675] evm: security.SMACK64EXEC (disabled) Jun 30 09:00:25.093801 [ 3.270275] evm: security.SMACK64TRANSMUTE (disabled) Jun 30 09:00:25.105778 [ 3.275309] evm: security.SMACK64MMAP (disabled) Jun 30 09:00:25.105792 [ 3.279909] evm: security.apparmor Jun 30 09:00:25.105838 [ 3.283294] evm: security.ima Jun 30 09:00:25.117718 [ 3.286246] evm: security.capability Jun 30 09:00:25.117775 [ 3.289810] evm: HMAC attrs: 0x1 Jun 30 09:00:25.117820 [ 3.879087] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 09:00:25.705762 [ 3.885048] clk: Disabling unused clocks Jun 30 09:00:25.717869 [ 3.898007] Freeing unused kernel image (initmem) memory: 2048K Jun 30 09:00:25.729772 [ 3.902864] Checked W+X mappings: passed, no W+X pages found Jun 30 09:00:25.729814 [ 3.908124] Run /init as init process Jun 30 09:00:25.741728 Loading, please wait... Jun 30 09:00:25.765715 Starting systemd-udevd version 252.26-1~deb12u2 Jun 30 09:00:25.849726 [ 4.842517] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 09:00:26.677657 [ 4.854637] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 09:00:26.689725 [ 4.863245] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 09:00:26.701715 [ 4.891070] usbcore: registered new interface driver usbfs Jun 30 09:00:26.725756 [ 4.895193] usbcore: registered new interface driver hub Jun 30 09:00:26.725807 [ 4.900457] usbcore: registered new device driver usb Jun 30 09:00:26.725855 [ 4.909825] phy phy-12130000.phy.2: phy_power_on was called before phy_init Jun 30 09:00:26.737764 [ 4.915349] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 09:00:26.749778 [ 4.923039] Synopsys Designware Multimedia Card Interface Driver Jun 30 09:00:26.749794 [ 4.931427] phy phy-12130000.phy.2: phy_power_on was called before phy_init Jun 30 09:00:26.761753 [ 4.942999] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Jun 30 09:00:26.773785 [ 4.951621] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 30 09:00:26.785780 [ 4.951744] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 30 09:00:26.785805 [ 4.972002] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 30 09:00:26.797750 [ 4.977034] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 30 09:00:26.809774 [ 4.982752] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Jun 30 09:00:26.809819 [ 4.997500] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 30 09:00:26.833745 [ 5.002512] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 30 09:00:26.833778 [ 5.019045] exynos-ohci 12120000.usb: USB Host Controller Jun 30 09:00:26.845740 [ 5.026228] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Jun 30 09:00:26.857753 [ 5.028883] SCSI subsystem initialized Jun 30 09:00:26.857811 [ 5.037360] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo Jun 30 09:00:26.869781 [ 5.045985] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 09:00:26.881725 [ 5.071498] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Jun 30 09:00:26.905789 [ 5.072221] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 109,32 bit host data width,128 deep fifo Jun 30 09:00:26.917777 [ 5.086578] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 09:00:26.917790 [ 5.095076] mmc_host mmc0: card is polling. Jun 30 09:00:26.929719 [ 5.119691] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 09:00:26.953782 [ 5.125282] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 09:00:26.965799 [ 5.126556] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 09:00:26.965814 [ 5.143205] usb usb1: Product: EHCI Host Controller Jun 30 09:00:26.977791 [ 5.148059] usb usb1: Manufacturer: Linux 6.1.0-22-armmp-lpae ehci_hcd Jun 30 09:00:26.977812 [ 5.154563] usb usb1: SerialNumber: 12110000.usb Jun 30 09:00:26.989675 [ 5.217522] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 09:00:27.049757 [ 5.248284] hub 1-0:1.0: USB hub found Jun 30 09:00:27.073733 [ 5.251392] hub 1-0:1.0: 3 ports detected Jun 30 09:00:27.085674 [ 5.271581] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Jun 30 09:00:27.109777 [ 5.278471] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 09:00:27.109812 [ 5.285621] usb usb2: Product: USB Host Controller Jun 30 09:00:27.121787 [ 5.290390] usb usb2: Manufacturer: Linux 6.1.0-22-armmp-lpae ohci_hcd Jun 30 09:00:27.121809 [ 5.296902] usb usb2: SerialNumber: 12120000.usb Jun 30 09:00:27.133704 [ 5.308745] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 30 09:00:27.145945 [ 5.317779] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 30 09:00:27.146014 [ 5.334050] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 30 09:00:27.169747 [ 5.343038] mmc0: new DDR MMC card at address 0001 Jun 30 09:00:27.169800 [ 5.344800] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 30 09:00:27.184816 [ 5.357958] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 09:00:27.196599 [ 5.363911] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 30 09:00:27.196599 [ 5.373359] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Jun 30 09:00:27.206166 [ 5.375824] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Jun 30 09:00:27.220531 [ 5.382151] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 30 09:00:27.220531 [ 5.397036] scsi host0: ahci-dwc Jun 30 09:00:27.220531 [ 5.400639] mmc1: new high speed SDHC card at address aaaa Jun 30 09:00:27.232559 [ 5.402152] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 110 Jun 30 09:00:27.244527 [ 5.425963] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Jun 30 09:00:27.256575 [ 5.430440] hub 2-0:1.0: USB hub found Jun 30 09:00:27.256575 [ 5.433815] hub 2-0:1.0: 3 ports detected Jun 30 09:00:27.265673 [ 5.448912] mmcblk0: p1 p2 p3 p4 Jun 30 09:00:27.277690 [ 5.454832] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Jun 30 09:00:27.289713 [ 5.461911] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Jun 30 09:00:27.289774 [ 5.468446] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (241:0) Jun 30 09:00:27.301687 [ 5.812721] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 09:00:27.652491 [ 5.886882] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 09:00:27.724560 [ 5.895294] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 30 09:00:27.724560 [ 5.902171] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 30 09:00:27.736560 [ 5.908034] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 30 09:00:27.736560 [ 5.915475] ata1.00: configured for UDMA/133 Jun 30 09:00:27.748556 [ 5.919251] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 30 09:00:27.748556 [ 5.976194] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 09:00:27.808518 [ 5.980297] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 09:00:27.808518 [ 5.992010] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Jun 30 09:00:27.820651 [ 6.000021] xhci-hcd xhci-hcd.2.auto: irq 111, io mem 0x12000000 Jun 30 09:00:27.832651 [ 6.006231] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 09:00:27.832701 [ 6.011440] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 09:00:27.844695 [ 6.019066] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 09:00:27.856635 [ 6.026190] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 09:00:27.856675 [ 6.033823] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 09:00:27.868677 [ 6.041012] usb usb3: Product: xHCI Host Controller Jun 30 09:00:27.868711 [ 6.045914] usb usb3: Manufacturer: Linux 6.1.0-22-armmp-lpae xhci-hcd Jun 30 09:00:27.880655 [ 6.052377] usb usb3: SerialNumber: xhci-hcd.2.auto Jun 30 09:00:27.880690 [ 6.057322] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 09:00:27.892494 [ 6.073491] hub 3-0:1.0: USB hub found Jun 30 09:00:27.904503 [ 6.075820] hub 3-0:1.0: 1 port detected Jun 30 09:00:27.904503 [ 6.080983] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 09:00:27.916517 [ 6.087989] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Jun 30 09:00:27.916517 [ 6.096060] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 09:00:27.928483 [ 6.103253] usb usb4: Product: xHCI Host Controller Jun 30 09:00:27.928483 [ 6.108098] usb usb4: Manufacturer: Linux 6.1.0-22-armmp-lpae xhci-hcd Jun 30 09:00:27.940525 [ 6.114601] usb usb4: SerialNumber: xhci-hcd.2.auto Jun 30 09:00:27.940525 [ 6.124752] hub 4-0:1.0: USB hub found Jun 30 09:00:27.952479 [ 6.127145] hub 4-0:1.0: 1 port detected Jun 30 09:00:27.952479 [ 6.128016] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 30 09:00:27.964541 [ 6.138462] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 30 09:00:27.964541 [ 6.143878] sd 0:0:0:0: [sda] Write Protect is off Jun 30 09:00:27.976540 [ 6.148672] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 30 09:00:27.988557 [ 6.157541] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 30 09:00:27.988557 [ 6.166726] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 09:00:28.000532 [ 6.188500] sda: sda1 sda2 < sda5 > Jun 30 09:00:28.012507 [ 6.191351] sd 0:0:0:0: [sda] Attached SCSI disk Jun 30 09:00:28.024464 [ 6.274793] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 09:00:28.108726 [ 6.382858] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 09:00:28.216523 [ 6.549612] I/O error, dev mmcblk1, sector 7743715 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 2 Jun 30 09:00:28.384489 [ 6.827237] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 09:00:28.660500 [ 6.901383] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 09:00:28.729777 [ 7.015514] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 09:00:28.849652 [ 7.123119] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 09:00:28.957712 [ 7.133226] random: crng init done Jun 30 09:00:28.957759 [ 7.242124] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. Jun 30 09:00:29.077772 [ 7.243154] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 09:00:29.089767 [ 7.253095] device-mapper: uevent: version 1.0.3 Jun 30 09:00:29.089828 [ 7.261782] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 09:00:29.101757 [ 7.274231] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Jun 30 09:00:29.113680 Begin: Loading essential drivers ... done. Jun 30 09:00:29.857692 Begin: Running /scripts/init-premount ... done. Jun 30 09:00:32.869766 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 30 09:00:32.881714 Begin: Running /scripts/local-premount ... done. Jun 30 09:00:32.917706 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 30 09:00:32.965688 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 30 09:00:33.061785 /dev/mapper/arndale--metrocentre--vg-root: clean, 39331/1220608 files, 377969/4882432 blocks Jun 30 09:00:33.325737 done. Jun 30 09:00:33.337701 [ 11.657595] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 30 09:00:33.493689 [ 11.896589] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. Jun 30 09:00:33.733724 done. Jun 30 09:00:33.733776 Begin: Running /scripts/local-bottom ... done. Jun 30 09:00:33.781719 Begin: Running /scripts/init-bottom ... done. Jun 30 09:00:33.817685 [ 12.219590] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. Jun 30 09:00:34.057681 INIT: version 3.06 booting Jun 30 09:00:34.381674 INIT: No inittab.d directory found Jun 30 09:00:34.465641 Using makefile-style concurrent boot in runlevel S. Jun 30 09:00:34.777630 Starting hotplug events dispatcher: systemd-udevd. Jun 30 09:00:36.557750 Synthesizing the initial hotplug events (subsystems)...done. Jun 30 09:00:36.809687 Synthesizing the initial hotplug events (devices)...done. Jun 30 09:00:37.373732 Waiting for /dev to be fully populated...[ 15.784200] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 09:00:37.613734 [ 15.807862] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 30 09:00:37.637751 [ 15.940703] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jun 30 09:00:37.769715 [ 15.973181] panfrost 11800000.gpu: clock rate = 533000000 Jun 30 09:00:37.805603 [ 16.111349] panfrost 11800000.gpu: mali-t600 id 0x600 major 0x0 minor 0x0 status 0x1 Jun 30 09:00:37.949754 [ 16.117687] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,31b4dfff Jun 30 09:00:37.949825 [ 16.125835] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 Jun 30 09:00:37.961768 [ 16.137534] panfrost 11800000.gpu: shader_present=0xf l2_present=0x1 Jun 30 09:00:37.973679 [ 16.161262] usb3503 usb-hub: switched to HUB mode Jun 30 09:00:37.985673 [ 16.164502] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 09:00:37.997756 [ 16.172528] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 0 Jun 30 09:00:38.009695 [ 16.193242] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 09:00:38.021748 [ 16.266447] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 09:00:38.105693 [ 16.408462] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 09:00:38.237774 [ 16.485248] usb 1-3: new high-speed USB device number 2 using exynos-ehci Jun 30 09:00:38.321683 [ 16.516576] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 09:00:38.345838 [ 16.624653] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 09:00:38.453769 [ 16.650223] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Jun 30 09:00:38.477762 [ 16.657032] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jun 30 09:00:38.489754 [ 16.666574] hub 1-3:1.0: USB hub found Jun 30 09:00:38.489813 [ 16.669061] hub 1-3:1.0: 3 ports detected Jun 30 09:00:38.501711 [ 16.698157] OF: graph: no port node found in /soc/hdmi@14530000 Jun 30 09:00:38.525729 [ 16.732718] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 09:00:38.561765 [ 16.895902] I/O error, dev mmcblk1, sector 7743714 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 2 Jun 30 09:00:38.729741 [ 16.977327] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Jun 30 09:00:38.813685 [ 17.103630] usb 1-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=77.32 Jun 30 09:00:38.933764 [ 17.110682] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Jun 30 09:00:38.945740 [ 17.118067] usb 1-3.2: Product: USB2.0 Hub Jun 30 09:00:38.945799 [ 17.128199] hub 1-3.2:1.0: USB hub found Jun 30 09:00:38.957733 [ 17.131255] hub 1-3.2:1.0: 4 ports detected Jun 30 09:00:38.957793 [ 17.192280] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 09:00:39.029720 [ 17.264484] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 09:00:39.101678 [ 17.379006] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 09:00:39.209651 [ 17.433830] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 30 09:00:39.269691 [ 17.487001] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 09:00:39.317763 [ 17.555646] usb 1-3.2.4: New USB device found, idVendor=0b95, idProduct=772a, bcdDevice= 0.01 Jun 30 09:00:39.393787 [ 17.563074] usb 1-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 30 09:00:39.393857 [ 17.570429] usb 1-3.2.4: Product: AX88772 Jun 30 09:00:39.401792 [ 17.574402] usb 1-3.2.4: Manufacturer: ASIX Elec. Corp. Jun 30 09:00:39.401855 [ 17.579755] usb 1-3.2.4: SerialNumber: 000001 Jun 30 09:00:39.417779 [ 17.595191] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 09:00:39.429696 [ 17.703174] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 09:00:39.533740 [ 17.710858] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 09:00:39.545731 [ 18.156229] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 30 09:00:39.993727 [ 18.839867] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 09:00:40.677751 [ 18.855549] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Jun 30 09:00:40.689768 [ 18.869380] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 9a:c5:05:89:eb:07 Jun 30 09:00:40.701770 [ 18.881972] usbcore: registered new interface driver asix Jun 30 09:00:40.713720 done. Jun 30 09:00:41.001688 [ 19.700318] EXT4-fs (dm-0): re-mounted. Quota mode: none. Jun 30 09:00:41.529716 Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). Jun 30 09:00:41.577742 Checking file systems.../dev/sda1: clean, 922/61056 files, 25374/243968 blocks Jun 30 09:00:43.365721 done. Jun 30 09:00:43.425748 Cleaning up temporary files... /tmp. Jun 30 09:00:43.701712 [ 22.123204] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 30 09:00:43.953729 [ 22.175247] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Jun 30 09:00:44.013709 [ 22.400734] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k FS Jun 30 09:00:44.241698 Mounting local filesystems...done. Jun 30 09:00:44.577750 Activating swapfile swap, if any...done. Jun 30 09:00:44.577815 Cleaning up temporary files.... Jun 30 09:00:44.625637 Starting Setting kernel variables: sysctl. Jun 30 09:00:44.853723 [ 23.631601] audit: type=1400 audit(1719738045.112:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=894 comm="apparmor_parser" Jun 30 09:00:45.465823 [ 23.651671] audit: type=1400 audit(1719738045.124:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=893 comm="apparmor_parser" Jun 30 09:00:45.489784 [ 23.665224] audit: type=1400 audit(1719738045.128:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=894 comm="apparmor_parser" Jun 30 09:00:45.501806 [ 23.905543] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Jun 30 09:00:45.733759 [ 24.022105] audit: type=1400 audit(1719738045.504:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=936 comm="apparmor_parser" Jun 30 09:00:45.865743 [ 24.045257] audit: type=1400 audit(1719738045.504:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=936 comm="apparmor_parser" Jun 30 09:00:45.889738 [ 24.058675] audit: type=1400 audit(1719738045.508:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=936 comm="apparmor_parser" Jun 30 09:00:45.901712 [ 24.376912] audit: type=1400 audit(1719738045.856:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=945 comm="apparmor_parser" Jun 30 09:00:46.213756 [ 24.399122] audit: type=1400 audit(1719738045.880:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=935 comm="apparmor_parser" Jun 30 09:00:46.237757 [ 24.415627] audit: type=1400 audit(1719738045.880:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=935 comm="apparmor_parser" Jun 30 09:00:46.261751 [ 24.432963] audit: type=1400 audit(1719738045.880:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=935 comm="apparmor_parser" Jun 30 09:00:46.273762 Starting: AppArmorLoading AppArmor profiles...done. Jun 30 09:00:46.285690 . Jun 30 09:00:46.285742 [ 26.054691] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 30 09:00:47.881745 [ 26.060768] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jun 30 09:00:47.893671 Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1 Jun 30 09:00:49.513771 Copyright 2004-2022 Internet Systems Consortium. Jun 30 09:00:49.513833 All rights reserved. Jun 30 09:00:49.513876 For info, please visit https://www.isc.org/software/dhcp/ Jun 30 09:00:49.525769 Jun 30 09:00:49.525821 Listening on LPF/eth0/9e:04:00:59:64:5a Jun 30 09:00:49.525867 Sending on LPF/eth0/9e:04:00:59:64:5a Jun 30 09:00:49.525911 Sending on Socket/fallback Jun 30 09:00:49.537756 Created duid "\000\001\000\001.\023\333=\236\004\000YdZ". Jun 30 09:00:49.537818 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 Jun 30 09:00:49.549671 [ 28.900004] exynos-mixer 14450000.mixer: deferred probe timeout, ignoring dependency Jun 30 09:00:50.737766 [ 28.910755] exynos4-fb 14400000.fimd: deferred probe timeout, ignoring dependency Jun 30 09:00:50.737849 [ 28.919586] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations Jun 30 09:00:50.749726 [ 28.926055] exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm]) Jun 30 09:00:50.761740 [ 28.936211] exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm]) Jun 30 09:00:50.773759 [ 28.946231] exynos-drm exynos-drm: bound 14500000.dsi (ops hdmi_enable [exynosdrm]) Jun 30 09:00:50.773825 [ 28.952914] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm]) Jun 30 09:00:50.785725 [ 28.962146] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Jun 30 09:00:50.797632 [ 28.968354] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Jun 30 09:00:50.797664 [ 28.976870] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 Jun 30 09:00:50.809672 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 Jun 30 09:00:51.085782 DHCPOFFER of 10.149.64.44 from 10.149.64.4 Jun 30 09:00:51.085855 DHCPREQUEST for 10.149.64.44 on eth0 to 255.255.255.255 port 67 Jun 30 09:00:51.085904 DHCPACK of 10.149.64.44 from 10.149.64.4 Jun 30 09:00:51.097769 bound to 10.149.64.44 -- renewal in 234 seconds. Jun 30 09:00:51.097829 done. Jun 30 09:00:51.097869 Cleaning up temporary files.... Jun 30 09:00:51.133701 Starting nftables: none Jun 30 09:00:51.217669 . Jun 30 09:00:51.685727 INIT: Entering runlevel: 2 Jun 30 09:00:51.745675 Using makefile-style concurrent boot in runlevel 2. Jun 30 09:00:51.793735 Starting Apache httpd web server: apache2. Jun 30 09:00:53.881724 Starting NTP server: ntpd2024-06-30T09:00:53 ntpd[1129]: INIT: ntpd ntpsec-1.2.2: Starting Jun 30 09:00:54.325785 2024-06-30T09:00:53 ntpd[1129]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 30 09:00:54.337815 . Jun 30 09:00:54.337871 Starting periodic command scheduler: cron. Jun 30 09:00:54.421693 Starting system message bus: dbus. Jun 30 09:00:54.673695 Starting OpenBSD Secure Shell server: sshd. Jun 30 09:00:55.513755 Jun 30 09:00:56.581717 Debian GNU/Linux 12 arndale-metrocentre ttySAC2 Jun 30 09:00:56.593721 Jun 30 09:00:56.593775 arndale-metrocentre login: [ 51.784935] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 30 09:01:13.621697 [ 86.662690] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 30 09:01:48.485883 [ 373.446693] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 30 09:06:35.277836 [ 687.878686] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 30 09:11:49.697723 [ 707.398685] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 30 09:12:09.221756 [ 719.750688] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 30 09:12:21.580627 [ 749.542811] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 30 09:12:51.365677 [ 836.648942] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 30 09:14:18.473726 Jun 30 09:21:43.857813 Jun 30 09:21:43.857959 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 09:21:43.858843 Jun 30 09:21:43.858909 CPU: Exynos5250@1000MHz Jun 30 09:21:43.858957 Jun 30 09:21:43.858996 Board: Arndale Jun 30 09:21:43.859038 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 09:21:43.869763 ready Jun 30 09:21:43.869818 DRAM: 2 GiB Jun 30 09:21:43.869861 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 09:21:43.881798 trace: enabled Jun 30 09:21:43.917775 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 09:21:44.277789 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 09:21:44.337780 In: serial Jun 30 09:21:44.337836 Out: serial Jun 30 09:21:44.337879 Err: serial Jun 30 09:21:44.349809 SCSI: ARNDALE SCSI INIT Jun 30 09:21:44.349866 Target spinup took 0 ms. Jun 30 09:21:44.349911 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 09:21:44.361822 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 09:21:44.361886 Net: Net Initialization Skipped Jun 30 09:21:44.361931 No ethernet found. Jun 30 09:21:44.373789 Hostname: arndale-metrocentre Jun 30 09:21:44.373849 Hit any key to stop autoboot: 2  1  0 Jun 30 09:21:46.293811 (Re)start USB... Jun 30 09:21:46.293893 USB0: USB EHCI 1.00 Jun 30 09:21:46.305762 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 09:21:51.900601 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 09:21:51.900601 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 09:21:52.345723 Waiting for Ethernet connection... done. Jun 30 09:21:53.989709 BOOTP broadcast 1 Jun 30 09:21:54.001687 BOOTP broadcast 2 Jun 30 09:21:55.573777 DHCP client bound to address 10.149.64.44 (1642 ms) Jun 30 09:21:55.573850 Using asx0 device Jun 30 09:21:55.573894 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 09:21:55.585726 Filename 'pxelinux.0'. Jun 30 09:21:55.585783 Load address: 0x43e00000 Jun 30 09:21:55.585827 Loading: *### Jun 30 09:21:55.597697 2.4 MiB/s Jun 30 09:21:55.609798 done Jun 30 09:21:55.609865 Bytes transferred = 42430 (a5be hex) Jun 30 09:21:55.609924 missing environment variable: pxeuuid Jun 30 09:21:55.609982 Retrieving file: pxelinux.cfg/0A95402C Jun 30 09:21:55.610039 Using asx0 device Jun 30 09:21:55.621748 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 09:21:55.621810 Filename 'pxelinux.cfg/0A95402C'. Jun 30 09:21:55.621856 Load address: 0x51000000 Jun 30 09:21:55.621898 Loading: *# Jun 30 09:21:55.633757 358.4 KiB/s Jun 30 09:21:55.633812 done Jun 30 09:21:55.633852 Bytes transferred = 734 (2de hex) Jun 30 09:21:55.633896 Config file found Jun 30 09:21:55.633937 Ignoring unknown command: serial Jun 30 09:21:55.633988 1: ^Overwrite Jun 30 09:21:55.634027 Retrieving file: /osstest/tmp//arndale-metrocentre--initrd.gz Jun 30 09:21:55.645764 Using asx0 device Jun 30 09:21:55.645819 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 09:21:55.657740 Filename '/osstest/tmp//arndale-metrocentre--initrd.gz'. Jun 30 09:21:55.657802 Load address: 0x43300000 Jun 30 09:21:55.657846 Loading: *################################################################# Jun 30 09:21:55.981662 ################################################################# Jun 30 09:21:56.308340 ################################################################# Jun 30 09:21:56.624509 ################################################################# Jun 30 09:21:56.948491 ################################################################# Jun 30 09:21:57.272527 ################################################################# Jun 30 09:21:57.596527 ################################################################# Jun 30 09:21:57.924603 ################################################################# Jun 30 09:21:58.248515 ################################################################# Jun 30 09:21:58.572524 ################################################################# Jun 30 09:21:58.881743 ################################################################# Jun 30 09:21:59.193806 ################################################################# Jun 30 09:21:59.505778 ################################################################# Jun 30 09:21:59.793667 ################################################################# Jun 30 09:22:00.105786 ################################################################# Jun 30 09:22:00.405688 ################################################################# Jun 30 09:22:00.681642 ################################################################# Jun 30 09:22:00.969696 ################################################################# Jun 30 09:22:01.221682 ################################################################# Jun 30 09:22:01.473649 ################################################################# Jun 30 09:22:01.741695 ################################################################# Jun 30 09:22:01.993591 ################################################################# Jun 30 09:22:02.269585 ################################################################# Jun 30 09:22:02.545602 ################################################################# Jun 30 09:22:02.785692 ################################################################# Jun 30 09:22:03.037737 ################################################################# Jun 30 09:22:03.277652 ################################################################# Jun 30 09:22:03.529681 ###################################### Jun 30 09:22:03.685706 3 MiB/s Jun 30 09:22:03.685763 done Jun 30 09:22:03.685803 Bytes transferred = 26310348 (19176cc hex) Jun 30 09:22:03.685849 Retrieving file: /osstest/debian-installer/armhf/2024-03-26-bookworm/linux Jun 30 09:22:03.697760 Using asx0 device Jun 30 09:22:03.697760 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 09:22:03.709715 Filename '/osstest/debian-installer/armhf/2024-03-26-bookworm/linux'. Jun 30 09:22:03.709720 Load address: 0x42000000 Jun 30 09:22:03.709720 Loading: *################################################################# Jun 30 09:22:04.045665 ################################################################# Jun 30 09:22:04.369680 ################################################################# Jun 30 09:22:04.693664 ################################################################# Jun 30 09:22:05.017647 ################################################################# Jun 30 09:22:05.341601 ############################################# Jun 30 09:22:05.561668 2.7 MiB/s Jun 30 09:22:05.561708 done Jun 30 09:22:05.561731 Bytes transferred = 5423616 (52c200 hex) Jun 30 09:22:05.569729 append: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-metrocentre url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=40387 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-metrocentre--initrd.gz --- console=ttySAC2,115200n8 Jun 30 09:22:05.605772 Retrieving file: /osstest/debian-installer/armhf/2024-03-26-bookworm/dtbs/exynos5250-arndale.dtb Jun 30 09:22:05.617778 Using asx0 device Jun 30 09:22:05.617832 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 09:22:05.629777 Filename '/osstest/debian-installer/armhf/2024-03-26-bookworm/dtbs/exynos5250-arndale.dtb'. Jun 30 09:22:05.629851 Load address: 0x43000000 Jun 30 09:22:05.641725 Loading: *#### Jun 30 09:22:05.653702 2.3 MiB/s Jun 30 09:22:05.653757 done Jun 30 09:22:05.653797 Bytes transferred = 46686 (b65e hex) Jun 30 09:22:05.653842 Kernel image @ 0x42000000 [ 0x000000 - 0x52c200 ] Jun 30 09:22:05.665712 ## Flattened Device Tree blob at 43000000 Jun 30 09:22:05.665772 Booting using the fdt blob at 0x43000000 Jun 30 09:22:05.665818 Loading Ramdisk to 4e6e8000, end 4ffff6cc ... OK Jun 30 09:22:06.097733 Loading Device Tree to 4e6d9000, end 4e6e765d ... OK Jun 30 09:22:06.097815 Jun 30 09:22:06.116162 Starting kernel ...(fake run for tracing) Jun 30 09:22:06.116236 Jun 30 09:22:06.116278 Jun 30 09:22:06.116316 Starting kernel ... Jun 30 09:22:06.116358 Jun 30 09:22:06.116396 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 09:22:12.217830 [ 0.000000] Linux version 6.1.0-18-armmp (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.76-1 (2024-02-01) Jun 30 09:22:12.229783 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 30 09:22:12.241787 [ 0.000000] CPU: div instructions available: patching division code Jun 30 09:22:12.241853 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 09:22:12.253761 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 09:22:12.253833 [ 0.000000] Memory policy: Data cache writealloc Jun 30 09:22:12.265761 [ 0.000000] efi: UEFI not found. Jun 30 09:22:12.265846 [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 Jun 30 09:22:12.265896 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 09:22:12.277779 [ 0.000000] Zone ranges: Jun 30 09:22:12.277836 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Jun 30 09:22:12.277886 [ 0.000000] Normal empty Jun 30 09:22:12.289741 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Jun 30 09:22:12.289804 [ 0.000000] Movable zone start for each node Jun 30 09:22:12.289852 [ 0.000000] Early memory node ranges Jun 30 09:22:12.301774 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 09:22:12.301837 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 09:22:12.313763 [ 0.000000] percpu: Embedded 18 pages/cpu s41620 r8192 d23916 u73728 Jun 30 09:22:12.313828 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Jun 30 09:22:12.325768 [ 0.000000] Kernel command line: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-metrocentre url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=40387 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-metrocentre--initrd.gz --- console=ttySAC2,115200n8 Jun 30 09:22:12.373766 [ 0.000000] Unknown kernel command line parameters "preseed --- vga=normal auto=true hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=40387 domain=test-lab.xenproject.org", will be passed to user space. Jun 30 09:22:12.409774 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Jun 30 09:22:12.421755 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 09:22:12.421827 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Jun 30 09:22:12.433769 [ 0.000000] Memory: 2015996K/2097152K available (11264K kernel code, 1696K rwdata, 3716K rodata, 2048K init, 378K bss, 64772K reserved, 16384K cma-reserved, 1294332K highmem) Jun 30 09:22:12.445765 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 09:22:12.457758 [ 0.000000] ftrace: allocating 39582 entries in 117 pages Jun 30 09:22:12.457822 [ 0.000000] ftrace: allocated 116 pages with 4 groups Jun 30 09:22:12.457871 [ 0.000000] trace event string verifier disabled Jun 30 09:22:12.469763 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 09:22:12.469823 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Jun 30 09:22:12.481749 [ 0.000000] Rude variant of Tasks RCU enabled. Jun 30 09:22:12.481809 [ 0.000000] Tracing variant of Tasks RCU enabled. Jun 30 09:22:12.481858 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Jun 30 09:22:12.493775 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 09:22:12.505771 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 09:22:12.505834 [ 0.000000] GIC: Using split EOI/Deactivate mode Jun 30 09:22:12.517772 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 09:22:12.517838 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 09:22:12.529756 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Jun 30 09:22:12.529820 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Jun 30 09:22:12.541765 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Jun 30 09:22:12.553795 [ 0.000019] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Jun 30 09:22:12.553869 [ 0.002638] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Jun 30 09:22:12.565750 [ 0.002652] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 09:22:12.577809 [ 0.002666] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 09:22:12.577883 [ 0.002678] Ignoring duplicate/late registration of read_current_timer delay Jun 30 09:22:12.589956 [ 0.003049] Console: colour dummy device 80x30 Jun 30 09:22:12.590017 [ 0.003090] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Jun 30 09:22:12.601870 [ 0.003103] CPU: Testing write buffer coherency: ok Jun 30 09:22:12.601927 [ 0.003146] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 09:22:12.613860 [ 0.003153] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 09:22:12.625855 [ 0.003159] pid_max: default: 32768 minimum: 301 Jun 30 09:22:12.625931 [ 0.003514] LSM: Security Framework initializing Jun 30 09:22:12.625981 [ 0.003586] landlock: Up and running. Jun 30 09:22:12.637855 [ 0.003591] Yama: disabled by default; enable with sysctl kernel.yama.* Jun 30 09:22:12.637920 [ 0.003776] AppArmor: AppArmor initialized Jun 30 09:22:12.649847 [ 0.003787] TOMOYO Linux initialized Jun 30 09:22:12.649907 [ 0.003829] LSM support for eBPF active Jun 30 09:22:12.649953 [ 0.004069] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 09:22:12.661861 [ 0.004083] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 09:22:12.673840 [ 0.005522] /cpus/cpu@0 missing clock-frequency property Jun 30 09:22:12.673904 [ 0.005549] /cpus/cpu@1 missing clock-frequency property Jun 30 09:22:12.673953 [ 0.005562] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 09:22:12.685858 [ 0.006514] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 09:22:12.697826 [ 0.006520] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 09:22:12.697891 [ 0.006625] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 09:22:12.709764 [ 0.006630] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 09:22:12.709827 [ 0.006777] Setting up static identity map for 0x40300000 - 0x403000ac Jun 30 09:22:12.721841 [ 0.007947] rcu: Hierarchical SRCU implementation. Jun 30 09:22:12.721906 [ 0.007953] rcu: Max phase no-delay instances is 1000. Jun 30 09:22:12.721953 [ 0.010093] EFI services will not be available. Jun 30 09:22:12.733842 [ 0.010441] smp: Bringing up secondary CPUs ... Jun 30 09:22:12.733903 [ 0.011180] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 09:22:12.745809 [ 0.011192] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 09:22:12.757842 [ 0.011321] smp: Brought up 1 node, 2 CPUs Jun 30 09:22:12.757904 [ 0.011330] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 09:22:12.757955 [ 0.011337] CPU: All CPU(s) started in HYP mode. Jun 30 09:22:12.769815 [ 0.011341] CPU: Virtualization extensions available. Jun 30 09:22:12.769848 [ 0.012017] devtmpfs: initialized Jun 30 09:22:12.769872 [ 0.023065] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 09:22:12.781816 [ 0.023319] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Jun 30 09:22:12.793871 [ 0.023344] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 09:22:12.793932 [ 0.023835] pinctrl core: initialized pinctrl subsystem Jun 30 09:22:12.805834 [ 0.024568] DMI not present or invalid. Jun 30 09:22:12.805894 [ 0.025245] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 09:22:12.817743 [ 0.030632] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 09:22:12.817791 [ 0.032204] audit: initializing netlink subsys (disabled) Jun 30 09:22:12.829793 [ 0.032408] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 Jun 30 09:22:12.829863 [ 0.033574] thermal_sys: Registered thermal governor 'fair_share' Jun 30 09:22:12.841725 [ 0.033581] thermal_sys: Registered thermal governor 'bang_bang' Jun 30 09:22:12.841788 [ 0.033586] thermal_sys: Registered thermal governor 'step_wise' Jun 30 09:22:12.853787 [ 0.033590] thermal_sys: Registered thermal governor 'user_space' Jun 30 09:22:12.853850 [ 0.033595] thermal_sys: Registered thermal governor 'power_allocator' Jun 30 09:22:12.865714 [ 0.033962] No ATAGs? Jun 30 09:22:12.865770 [ 0.034030] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jun 30 09:22:12.877779 [ 0.034039] hw-breakpoint: maximum watchpoint size is 8 bytes. Jun 30 09:22:12.877841 [ 0.035127] Serial: AMBA PL011 UART driver Jun 30 09:22:12.889653 [ 0.091481] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Jun 30 09:22:12.889693 [ 0.102450] iommu: Default domain type: Translated Jun 30 09:22:12.901749 [ 0.102458] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 09:22:12.901813 [ 0.103443] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Jun 30 09:22:12.913657 [ 0.103997] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 09:22:12.913691 [ 0.104009] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 09:22:12.925756 [ 0.104653] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 09:22:12.925831 [ 0.104683] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 09:22:12.937778 [ 0.104865] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 09:22:12.949605 [ 0.105216] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 09:22:12.949639 [ 0.105227] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 09:22:12.949667 [ 0.105621] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 09:22:12.961702 [ 0.105913] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 09:22:12.961736 [ 0.105922] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 09:22:12.973825 [ 0.106196] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 09:22:12.973887 [ 0.106297] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 09:22:12.985748 [ 0.106306] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 09:22:12.985802 [ 0.106502] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 09:22:12.997843 [ 0.106702] pps_core: LinuxPPS API ver. 1 registered Jun 30 09:22:12.997909 [ 0.106707] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 09:22:13.009837 [ 0.106723] PTP clock support registered Jun 30 09:22:13.009896 [ 0.108220] NetLabel: Initializing Jun 30 09:22:13.009941 [ 0.108226] NetLabel: domain hash size = 128 Jun 30 09:22:13.021869 [ 0.108232] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Jun 30 09:22:13.021933 [ 0.108304] NetLabel: unlabeled traffic allowed by default Jun 30 09:22:13.033737 [ 0.108462] vgaarb: loaded Jun 30 09:22:13.033768 [ 0.109144] clocksource: Switched to clocksource mct-frc Jun 30 09:22:13.033795 [ 0.177864] VFS: Disk quotas dquot_6.6.0 Jun 30 09:22:13.045737 [ 0.177956] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jun 30 09:22:13.045774 [ 0.178696] AppArmor: AppArmor Filesystem Enabled Jun 30 09:22:13.057812 [ 0.187739] NET: Registered PF_INET protocol family Jun 30 09:22:13.057874 [ 0.187949] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Jun 30 09:22:13.069845 [ 0.189570] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 09:22:13.069915 [ 0.189663] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 09:22:13.081878 [ 0.189687] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Jun 30 09:22:13.093812 [ 0.189782] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Jun 30 09:22:13.093881 [ 0.190010] TCP: Hash tables configured (established 8192 bind 8192) Jun 30 09:22:13.105824 [ 0.190233] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Jun 30 09:22:13.105894 [ 0.190318] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 09:22:13.117857 [ 0.190358] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 09:22:13.117922 [ 0.190558] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 09:22:13.129911 [ 0.190591] NET: Registered PF_XDP protocol family Jun 30 09:22:13.129972 [ 0.190602] PCI: CLS 0 bytes, default 64 Jun 30 09:22:13.141850 [ 0.191118] Trying to unpack rootfs image as initramfs... Jun 30 09:22:13.141939 [ 0.191529] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Jun 30 09:22:13.153871 [ 0.191771] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Jun 30 09:22:13.153940 [ 0.193418] Initialise system trusted keyrings Jun 30 09:22:13.165851 [ 0.193502] Key type blacklist registered Jun 30 09:22:13.165910 [ 0.193746] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Jun 30 09:22:13.177851 [ 0.200929] zbud: loaded Jun 30 09:22:13.177913 [ 0.202034] integrity: Platform Keyring initialized Jun 30 09:22:13.177958 [ 0.202063] integrity: Machine keyring initialized Jun 30 09:22:13.189850 [ 0.202071] Key type asymmetric registered Jun 30 09:22:13.189937 [ 0.202078] Asymmetric key parser 'x509' registered Jun 30 09:22:13.190010 [ 1.562165] Freeing initrd memory: 25696K Jun 30 09:22:13.201845 [ 1.573908] alg: self-tests for CTR-KDF (hmac(sha256)) passed Jun 30 09:22:13.201909 [ 1.574193] bounce: pool size: 64 pages Jun 30 09:22:13.213843 [ 1.574355] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Jun 30 09:22:13.213914 [ 1.574520] io scheduler mq-deadline registered Jun 30 09:22:13.225838 [ 1.579700] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Jun 30 09:22:13.225912 [ 1.600580] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 09:22:13.237855 [ 1.600591] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 09:22:13.249796 [ 1.602930] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 09:22:13.249865 [ 1.602940] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 09:22:13.261778 [ 1.603731] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 09:22:13.273771 [ 1.603740] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 09:22:13.273845 [ 1.604568] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 09:22:13.285782 [ 1.604577] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 09:22:13.297774 [ 1.606978] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 09:22:13.309752 [ 1.609798] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 09:22:13.309817 [ 1.612505] Serial: AMBA driver Jun 30 09:22:13.309863 [ 1.612749] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 09:22:13.321777 [ 1.613306] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 09:22:13.333764 [ 1.613760] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 09:22:13.345753 [ 2.744650] printk: console [ttySAC2] enabled Jun 30 09:22:13.345815 [ 2.749481] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Jun 30 09:22:13.357758 [ 2.760138] STM32 USART driver initialized Jun 30 09:22:13.357820 [ 2.774293] mousedev: PS/2 mouse device common for all mice Jun 30 09:22:13.369734 [ 2.812563] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 09:22:13.417742 [ 2.821225] s5m-rtc s5m-rtc: setting system clock to 2000-01-02T00:00:30 UTC (946771230) Jun 30 09:22:13.429707 [ 2.831022] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Jun 30 09:22:13.429773 [ 2.838477] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 09:22:13.441746 [ 2.846447] NET: Registered PF_INET6 protocol family Jun 30 09:22:13.441809 [ 2.860277] Segment Routing with IPv6 Jun 30 09:22:13.454070 [ 2.862568] In-situ OAM (IOAM) with IPv6 Jun 30 09:22:13.466077 [ 2.866467] mip6: Mobile IPv6 Jun 30 09:22:13.466134 [ 2.869374] NET: Registered PF_PACKET protocol family Jun 30 09:22:13.466184 [ 2.874529] mpls_gso: MPLS GSO support Jun 30 09:22:13.477761 [ 2.878712] ThumbEE CPU extension supported. Jun 30 09:22:13.477822 [ 2.882400] Registering SWP/SWPB emulation handler Jun 30 09:22:13.477870 [ 2.887611] registered taskstats version 1 Jun 30 09:22:13.489735 [ 2.891275] Loading compiled-in X.509 certificates Jun 30 09:22:13.489797 [ 3.347454] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Jun 30 09:22:13.948686 [ 3.354846] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Jun 30 09:22:13.960779 [ 3.365897] zswap: loaded using pool lzo/zbud Jun 30 09:22:13.972645 [ 3.369824] Key type .fscrypt registered Jun 30 09:22:13.972660 [ 3.373075] Key type fscrypt-provisioning registered Jun 30 09:22:13.972660 [ 3.386956] Key type encrypted registered Jun 30 09:22:13.984563 [ 3.389546] AppArmor: AppArmor sha1 policy hashing enabled Jun 30 09:22:13.996621 [ 3.395023] ima: No TPM chip found, activating TPM-bypass! Jun 30 09:22:13.996621 [ 3.400469] ima: Allocated hash algorithm: sha256 Jun 30 09:22:14.008586 [ 3.405198] ima: No architecture policies found Jun 30 09:22:14.008586 [ 3.409700] evm: Initialising EVM extended attributes: Jun 30 09:22:14.008586 [ 3.414764] evm: security.selinux Jun 30 09:22:14.020593 [ 3.418059] evm: security.SMACK64 (disabled) Jun 30 09:22:14.020593 [ 3.422312] evm: security.SMACK64EXEC (disabled) Jun 30 09:22:14.020593 [ 3.426913] evm: security.SMACK64TRANSMUTE (disabled) Jun 30 09:22:14.032602 [ 3.431947] evm: security.SMACK64MMAP (disabled) Jun 30 09:22:14.032602 [ 3.436547] evm: security.apparmor Jun 30 09:22:14.044613 [ 3.439932] evm: security.ima Jun 30 09:22:14.044613 [ 3.442884] evm: security.capability Jun 30 09:22:14.044613 [ 3.446448] evm: HMAC attrs: 0x1 Jun 30 09:22:14.044613 [ 4.029204] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 09:22:14.632581 [ 4.055516] Freeing unused kernel image (initmem) memory: 2048K Jun 30 09:22:14.656582 [ 4.060391] Checked W+X mappings: passed, no W+X pages found Jun 30 09:22:14.668563 [ 4.065646] Run /init as init process Jun 30 09:22:14.668563 [ 4.614446] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 09:22:15.224501 [ 4.695769] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 09:22:15.296548 [ 4.709944] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 09:22:15.320508 [ 4.726490] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 09:22:15.332544 [ 4.736946] usbcore: registered new interface driver usbfs Jun 30 09:22:15.344568 [ 4.741086] usbcore: registered new interface driver hub Jun 30 09:22:15.344568 [ 4.746719] usbcore: registered new device driver usb Jun 30 09:22:15.344568 [ 4.760770] phy phy-12130000.phy.1: phy_power_on was called before phy_init Jun 30 09:22:15.368534 [ 4.767531] phy phy-12130000.phy.1: phy_power_on was called before phy_init Jun 30 09:22:15.368534 [ 4.780546] exynos-ohci 12120000.usb: USB Host Controller Jun 30 09:22:15.380537 [ 4.784545] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Jun 30 09:22:15.392534 [ 4.794697] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 09:22:15.392534 [ 4.812329] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 09:22:15.416564 [ 4.819657] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Jun 30 09:22:15.428675 [ 4.835914] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Jun 30 09:22:15.440589 [ 4.845387] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Jun 30 09:22:15.452543 [ 4.869301] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 09:22:15.476576 [ 4.879149] VDD_ALIVE_1.0V: Bringing 1000000uV into 1100000-1100000uV Jun 30 09:22:15.488606 [ 4.884990] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 09:22:15.488606 [ 4.892457] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 09:22:15.500609 [ 4.899597] usb usb2: Product: EHCI Host Controller Jun 30 09:22:15.500609 [ 4.904450] usb usb2: Manufacturer: Linux 6.1.0-18-armmp ehci_hcd Jun 30 09:22:15.512575 [ 4.910550] usb usb2: SerialNumber: 12110000.usb Jun 30 09:22:15.512575 [ 4.934816] hub 2-0:1.0: USB hub found Jun 30 09:22:15.536687 [ 4.939071] hub 2-0:1.0: 3 ports detected Jun 30 09:22:15.536691 [ 4.945465] usb3503 usb-hub: switched to HUB mode Jun 30 09:22:15.548612 [ 4.948735] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 09:22:15.548612 [ 4.950033] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Jun 30 09:22:15.560683 [ 4.962841] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 09:22:15.572752 [ 4.970022] usb usb1: Product: USB Host Controller Jun 30 09:22:15.572816 [ 4.974784] usb usb1: Manufacturer: Linux 6.1.0-18-armmp ohci_hcd Jun 30 09:22:15.584570 [ 4.980867] usb usb1: SerialNumber: 12120000.usb Jun 30 09:22:15.584570 [ 4.989899] hub 1-0:1.0: USB hub found Jun 30 09:22:15.596466 [ 4.993223] hub 1-0:1.0: 3 ports detected Jun 30 09:22:15.596466 [ 5.269196] usb 2-3: new high-speed USB device number 2 using exynos-ehci Jun 30 09:22:15.869790 [ 5.280812] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 09:22:15.881732 [ 5.288632] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 09:22:15.893742 [ 5.295355] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 Jun 30 09:22:15.905746 [ 5.304293] xhci-hcd xhci-hcd.2.auto: irq 108, io mem 0x12000000 Jun 30 09:22:15.905808 [ 5.310487] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 09:22:15.917751 [ 5.315674] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 09:22:15.917822 [ 5.323315] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 09:22:15.929769 [ 5.329968] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 09:22:15.941778 [ 5.338066] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 09:22:15.941847 [ 5.345273] usb usb3: Product: xHCI Host Controller Jun 30 09:22:15.953732 [ 5.350123] usb usb3: Manufacturer: Linux 6.1.0-18-armmp xhci-hcd Jun 30 09:22:15.953796 [ 5.356198] usb usb3: SerialNumber: xhci-hcd.2.auto Jun 30 09:22:15.965760 [ 5.361698] hub 3-0:1.0: USB hub found Jun 30 09:22:15.965811 [ 5.364804] hub 3-0:1.0: 1 port detected Jun 30 09:22:15.965852 [ 5.369229] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 09:22:15.977763 [ 5.376902] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Jun 30 09:22:15.992647 [ 5.385024] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 09:22:15.992647 [ 5.392229] usb usb4: Product: xHCI Host Controller Jun 30 09:22:15.992647 [ 5.397086] usb usb4: Manufacturer: Linux 6.1.0-18-armmp xhci-hcd Jun 30 09:22:16.004846 [ 5.403161] usb usb4: SerialNumber: xhci-hcd.2.auto Jun 30 09:22:16.004846 [ 5.408759] hub 4-0:1.0: USB hub found Jun 30 09:22:16.016630 [ 5.411794] hub 4-0:1.0: 1 port detected Jun 30 09:22:16.016630 [ 5.429613] usb 2-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Jun 30 09:22:16.040603 [ 5.436360] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jun 30 09:22:16.040603 [ 5.444664] hub 2-3:1.0: USB hub found Jun 30 09:22:16.040603 [ 5.447354] hub 2-3:1.0: 3 ports detected Jun 30 09:22:16.052539 Starting system log daemon: syslogd, klogd. Jun 30 09:22:16.196549 /var/run/utmp: No such file or directory Jun 30 09:22:18.045781 [?1h=(B   Jun 30 09:22:18.121070  Jun 30 09:22:18.121284 [  (-*) ][ Jan 02  0:00 ] Jun 30 09:22:18.121381 [  (0*start) ][ Jan 02  0:00 ] Jun 30 09:22:18.129801 [  (0*start) ][ Jan 02  0:00 ] Jun 30 09:22:18.141720 [  (0*start) ][ Jan 02  0:00 ] Jun 30 09:22:18.153724 [  (0*start) ][ Jan 02  0:00 ]                        [  (0*start) ][ Jan 02  0:00 ][  (0*start) ][ Jan 02  0:00 ] Jun 30 09:22:18.213747 [ 0- start  (2*shell) ][ Jan 02  0:00 ] Jun 30 09:22:18.225746 [ 0- start  (2*shell) ][ Jan 02  0:00 ] Jun 30 09:22:18.237776 [ 0- start  (2*shell) ][ Jan 02  0:00 ] Jun 30 09:22:18.249755 [ 0- start  (2*shell) ][ Jan 02  0:00 ]                        [ 0- start  (2*shell) ][ Jan 02  0:00 ][ 0- start  (2*shell) ][ Jan 02  0:00 ] Jun 30 09:22:18.309794 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:00 ] Jun 30 09:22:18.321753 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:00 ] Jun 30 09:22:18.333749 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:00 ] Jun 30 09:22:18.345763 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:00 ]                        [ 0 start 2- shell  (3*shell) ][ Jan 02  0:00 ][ 0 start 2- shell  (3*shell) ][ Jan 02  0:00 ] Jun 30 09:22:18.405755 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:00 ] Jun 30 09:22:18.417731 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:00 ] Jun 30 09:22:18.429689 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:00 ] Jun 30 09:22:18.441722 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:00 ]                        [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:00 ][ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:00 ] Jun 30 09:22:18.501736 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Jun 30 09:22:18.513760 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Jun 30 09:22:18.525747 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Jun 30 09:22:18.537769 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:00 ]                        [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:00 ][ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Jun 30 09:22:18.597762 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Jun 30 09:22:18.609768 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Jun 30 09:22:18.621756 [  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:00 ] Jun 30 09:22:19.089706 Detecting network hardware ... 2%... 95%... 100% Jun 30 09:22:20.829686 Detecting link on eth0; please wait... ... 0%... 10%... 20% Jun 30 09:22:25.741748 Waiting for link-local address... ... 8%... 16%... 25%... 33%... 41%... 100% Jun 30 09:22:27.028542 Attempting IPv6 autoconfiguration... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 75%... 83%... 91%... 100% Jun 30 09:22:33.096442 Configuring the network with DHCP ... 0%... 100% Jun 30 09:22:36.265657 [  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:01 ] Checking the Debian archive mirror ... 25%... 50%... 75%... 100% Jun 30 09:22:44.469726 Loading additional components ... 0%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Jun 30 09:23:18.392676 Setting up the clock ... 0%... 3%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  9:23 ]... 100% Jun 30 09:23:21.200610 Loading additional components ... 50%... 100% Jun 30 09:23:22.864689 Detecting disks and all other hardware ... 2%... 95%... 100% Jun 30 09:23:27.172723 Loading additional components ... 5%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Jun 30 09:23:36.077705 Loading additional components ... 25%... 50%... 75%... 100% Jun 30 09:23:38.485711 Starting up the partitioner ... 4%... 13%... 21%... 30%... 43%... 52%... 60%... 73%... 82%... 91%... 100% Jun 30 09:23:53.528429 [  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  9:24 ] Guided partitioning ... 16%... 33%... 50%... 66%... 83%... 100% Jun 30 09:24:02.105800 Starting up the partitioner ... 4%... 12%... 20%... 32%... 40%... 52%... 60%... 72%... 80%... 92%... 100% Jun 30 09:24:12.212606 Partitions formatting ... 33% Jun 30 09:24:20.844699 Partitions formatting Jun 30 09:24:30.924430 Partitions formatting Installing the base system ... 0%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  9:25 ]... 17%... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  9:26 ]... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  9:27 ]... 48%... 50%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  9:28 ]...  Jun 30 09:28:21.541757  60%... 70%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  9:29 ]... 79%... 83%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  9:30 ][  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  9:31 ]... 91%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  9:32 ]... 100% Jun 30 09:32:49.685607 Configuring apt ... 7%... 14%... 14%... 21%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  9:33 ]... 35%... 42%... 50%... 60%... 71%. Jun 30 09:33:27.049587 ... 82%... 92%... 100% Jun 30 09:33:29.689713 Select and install software ... 1%... 10%... 13%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  9:34 ]... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  9:35 ]... 40%... 50%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  9:36 ]... Jun 30 09:36:17.889623 . 60%... 70%... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  9:37 ]... 88%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  9:38 ]... 90%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  9:39 ]... 94%... 100% Jun 30 09:39:28.889648 Finishing the installation ... 4%... 12%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  9:40 ][  (1*installer) 2 shell 3 shell 4- log ][ Jun 30  9:41 ]... 16%... 20%... 32%... 40%... 44%... Jun 30 09:41:15.937742  52%... 60%... 72%... 80%... 92% The system is going down NOW! Jun 30 09:41:26.077583 Sent SIGTERM Sent SIGKILL to all processes Jun 30 09:41:27.073616 Requesting system reboot Jun 30 09:41:27.085607 [ 1157.516557] reboot: Reó Jun 30 09:41:28.441633 Jun 30 09:41:28.441633 Jun 30 09:41:28.441633 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 09:41:28.441633 Jun 30 09:41:28.441633 CPU: Exynos5250@1000MHz Jun 30 09:41:28.453642 Jun 30 09:41:28.453642 Board: Arndale Jun 30 09:41:28.453642 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 09:41:28.453642 ready Jun 30 09:41:28.453642 DRAM: 2 GiB Jun 30 09:41:28.453642 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 09:41:28.477580 trace: enabled Jun 30 09:41:28.513597 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 09:41:28.873617 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 09:41:28.933654 In: serial Jun 30 09:41:28.933654 Out: serial Jun 30 09:41:28.933654 Err: serial Jun 30 09:41:28.933654 SCSI: ARNDALE SCSI INIT Jun 30 09:41:28.933654 Target spinup took 0 ms. Jun 30 09:41:28.945717 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 09:41:28.945717 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 09:41:28.957803 Net: Net Initialization Skipped Jun 30 09:41:28.957882 No ethernet found. Jun 30 09:41:28.957924 Hostname: arndale-metrocentre Jun 30 09:41:28.957968 Hit any key to stop autoboot: 2  1  0 Jun 30 09:41:30.877723 (Re)start USB... Jun 30 09:41:30.889710 USB0: USB EHCI 1.00 Jun 30 09:41:30.889766 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 09:41:36.489752 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 09:41:36.489838 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 09:41:36.933733 Waiting for Ethernet connection... done. Jun 30 09:41:38.581745 BOOTP broadcast 1 Jun 30 09:41:38.581823 BOOTP broadcast 2 Jun 30 09:41:39.949658 DHCP client bound to address 10.149.64.44 (1428 ms) Jun 30 09:41:39.961771 Using asx0 device Jun 30 09:41:39.961827 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 09:41:39.961876 Filename 'pxelinux.0'. Jun 30 09:41:39.961919 Load address: 0x43e00000 Jun 30 09:41:39.973643 Loading: *### Jun 30 09:41:39.985686 2.4 MiB/s Jun 30 09:41:39.985716 done Jun 30 09:41:39.985738 Bytes transferred = 42430 (a5be hex) Jun 30 09:41:39.985763 missing environment variable: pxeuuid Jun 30 09:41:39.997694 Retrieving file: pxelinux.cfg/0A95402C Jun 30 09:41:39.997726 Using asx0 device Jun 30 09:41:39.997749 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 09:41:39.997775 Filename 'pxelinux.cfg/0A95402C'. Jun 30 09:41:40.009831 Load address: 0x51000000 Jun 30 09:41:40.009888 Loading: *# Jun 30 09:41:40.009929 31.3 KiB/s Jun 30 09:41:40.009970 done Jun 30 09:41:40.010008 Bytes transferred = 65 (41 hex) Jun 30 09:41:40.010052 Config file found Jun 30 09:41:40.021833 Ignoring unknown command: serial Jun 30 09:41:40.021892 1: local Jun 30 09:41:40.021932 scanning bus for devices... Jun 30 09:41:40.021974 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 09:41:40.045702 Type: Hard Disk Jun 30 09:41:40.045733 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 09:41:40.045760 Found 1 device(s). Jun 30 09:41:40.045782 Jun 30 09:41:40.045802 SCSI device 0: Jun 30 09:41:40.045823 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 09:41:40.057706 Type: Hard Disk Jun 30 09:41:40.057737 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 09:41:40.069752 ... is now current device Jun 30 09:41:40.069809 Scanning scsi 0... Jun 30 09:41:40.069851 Found U-Boot script /boot.scr Jun 30 09:41:40.189606 641 bytes read in 48 ms (12.7 KiB/s) Jun 30 09:41:40.237696 ## Executing script at 50000000 Jun 30 09:41:40.237727 Loading dtbs/exynos5250-arndale.dtb Jun 30 09:41:40.237751 46686 bytes read in 1531 ms (29.3 KiB/s) Jun 30 09:41:41.737679 Loading vmlinuz-6.1.0-22-armmp-lpae Jun 30 09:41:41.737722 5505536 bytes read in 189 ms (27.8 MiB/s) Jun 30 09:41:41.953805 Loading initrd.img-6.1.0-22-armmp-lpae Jun 30 09:41:41.953863 25720657 bytes read in 1940 ms (12.6 MiB/s) Jun 30 09:41:43.852509 Booting Jun 30 09:41:43.852509 Kernel image @ 0x42000000 [ 0x000000 - 0x540200 ] Jun 30 09:41:43.852509 ## Flattened Device Tree blob at 43000000 Jun 30 09:41:43.852509 Booting using the fdt blob at 0x43000000 Jun 30 09:41:43.864498 Loading Ramdisk to 4e778000, end 4ffff751 ... OK Jun 30 09:41:44.272466 Loading Device Tree to 4e769000, end 4e77765d ... OK Jun 30 09:41:44.284455 Jun 30 09:41:44.284455 Starting kernel ...(fake run for tracing) Jun 30 09:41:44.284455 Jun 30 09:41:44.284455 Jun 30 09:41:44.300457 Starting kernel ... Jun 30 09:41:44.300457 Jun 30 09:41:44.300457 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 09:41:50.497862 [ 0.000000] Linux version 6.1.0-22-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.94-1 (2024-06-21) Jun 30 09:41:50.509838 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=30c5387d Jun 30 09:41:50.521830 [ 0.000000] CPU: div instructions available: patching division code Jun 30 09:41:50.521895 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 09:41:50.533820 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 09:41:50.533891 [ 0.000000] Memory policy: Data cache writealloc Jun 30 09:41:50.545851 [ 0.000000] efi: UEFI not found. Jun 30 09:41:50.545909 [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000 Jun 30 09:41:50.545958 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 09:41:50.557835 [ 0.000000] Zone ranges: Jun 30 09:41:50.557892 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Jun 30 09:41:50.557942 [ 0.000000] Normal empty Jun 30 09:41:50.569768 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Jun 30 09:41:50.569831 [ 0.000000] Movable zone start for each node Jun 30 09:41:50.585772 [ 0.000000] Early memory node ranges Jun 30 09:41:50.585832 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 09:41:50.585881 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 09:41:50.597690 [ 0.000000] percpu: Embedded 18 pages/cpu s44756 r8192 d20780 u73728 Jun 30 09:41:50.597726 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Jun 30 09:41:50.609769 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=ttySAC2,115200n8 Jun 30 09:41:50.621695 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Jun 30 09:41:50.621734 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 09:41:50.633823 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Jun 30 09:41:50.633887 [ 0.000000] Memory: 2015520K/2097152K available (12288K kernel code, 1714K rwdata, 3748K rodata, 2048K init, 382K bss, 65248K reserved, 16384K cma-reserved, 1294332K highmem) Jun 30 09:41:50.657782 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 09:41:50.657845 [ 0.000000] ftrace: allocating 39982 entries in 118 pages Jun 30 09:41:50.669769 [ 0.000000] ftrace: allocated 118 pages with 5 groups Jun 30 09:41:50.669829 [ 0.000000] trace event string verifier disabled Jun 30 09:41:50.681740 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 09:41:50.681808 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Jun 30 09:41:50.681860 [ 0.000000] Rude variant of Tasks RCU enabled. Jun 30 09:41:50.693767 [ 0.000000] Tracing variant of Tasks RCU enabled. Jun 30 09:41:50.693826 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Jun 30 09:41:50.705752 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 09:41:50.705814 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 09:41:50.717783 [ 0.000000] GIC: Using split EOI/Deactivate mode Jun 30 09:41:50.717843 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 09:41:50.729761 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 09:41:50.729823 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Jun 30 09:41:50.741754 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Jun 30 09:41:50.753768 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Jun 30 09:41:50.753837 [ 0.000019] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Jun 30 09:41:50.765766 [ 0.002636] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Jun 30 09:41:50.765827 [ 0.002650] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 09:41:50.777767 [ 0.002665] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 09:41:50.789773 [ 0.002677] Ignoring duplicate/late registration of read_current_timer delay Jun 30 09:41:50.801770 [ 0.003041] Console: colour dummy device 80x30 Jun 30 09:41:50.801832 [ 0.003081] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Jun 30 09:41:50.813770 [ 0.003095] CPU: Testing write buffer coherency: ok Jun 30 09:41:50.813830 [ 0.003137] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 09:41:50.825733 [ 0.003145] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 09:41:50.825767 [ 0.003152] pid_max: default: 32768 minimum: 301 Jun 30 09:41:50.837782 [ 0.003508] LSM: Security Framework initializing Jun 30 09:41:50.837843 [ 0.003579] landlock: Up and running. Jun 30 09:41:50.849832 [ 0.003583] Yama: disabled by default; enable with sysctl kernel.yama.* Jun 30 09:41:50.849896 [ 0.003768] AppArmor: AppArmor initialized Jun 30 09:41:50.849943 [ 0.003781] TOMOYO Linux initialized Jun 30 09:41:50.861757 [ 0.003825] LSM support for eBPF active Jun 30 09:41:50.861823 [ 0.004068] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 09:41:50.873758 [ 0.004081] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 09:41:50.873825 [ 0.005478] /cpus/cpu@0 missing clock-frequency property Jun 30 09:41:50.885761 [ 0.005505] /cpus/cpu@1 missing clock-frequency property Jun 30 09:41:50.885821 [ 0.005519] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 09:41:50.897752 [ 0.006455] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 09:41:50.897839 [ 0.006462] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 09:41:50.909764 [ 0.006563] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 09:41:50.909832 [ 0.006568] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 09:41:50.921764 [ 0.006707] Setting up static identity map for 0x40400000 - 0x404000ac Jun 30 09:41:50.921833 [ 0.007870] rcu: Hierarchical SRCU implementation. Jun 30 09:41:50.933771 [ 0.007876] rcu: Max phase no-delay instances is 1000. Jun 30 09:41:50.933833 [ 0.010002] EFI services will not be available. Jun 30 09:41:50.945827 [ 0.010342] smp: Bringing up secondary CPUs ... Jun 30 09:41:50.945907 [ 0.011069] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 09:41:50.945974 [ 0.011081] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 09:41:50.957846 [ 0.011212] smp: Brought up 1 node, 2 CPUs Jun 30 09:41:50.969777 [ 0.011220] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 09:41:50.969842 [ 0.011228] CPU: All CPU(s) started in HYP mode. Jun 30 09:41:50.969890 [ 0.011231] CPU: Virtualization extensions available. Jun 30 09:41:50.981735 [ 0.012101] devtmpfs: initialized Jun 30 09:41:50.981799 [ 0.022852] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 09:41:50.993778 [ 0.023084] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Jun 30 09:41:51.005761 [ 0.023108] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 09:41:51.005825 [ 0.023637] pinctrl core: initialized pinctrl subsystem Jun 30 09:41:51.017772 [ 0.024386] DMI not present or invalid. Jun 30 09:41:51.017830 [ 0.025060] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 09:41:51.017880 [ 0.026603] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 09:41:51.029774 [ 0.028084] audit: initializing netlink subsys (disabled) Jun 30 09:41:51.029835 [ 0.028285] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 Jun 30 09:41:51.041787 [ 0.029463] thermal_sys: Registered thermal governor 'fair_share' Jun 30 09:41:51.053759 [ 0.029470] thermal_sys: Registered thermal governor 'bang_bang' Jun 30 09:41:51.053826 [ 0.029475] thermal_sys: Registered thermal governor 'step_wise' Jun 30 09:41:51.065761 [ 0.029479] thermal_sys: Registered thermal governor 'user_space' Jun 30 09:41:51.065825 [ 0.029484] thermal_sys: Registered thermal governor 'power_allocator' Jun 30 09:41:51.077749 [ 0.029680] No ATAGs? Jun 30 09:41:51.077805 [ 0.029745] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jun 30 09:41:51.077861 [ 0.029753] hw-breakpoint: maximum watchpoint size is 8 bytes. Jun 30 09:41:51.089843 [ 0.030831] Serial: AMBA PL011 UART driver Jun 30 09:41:51.089864 [ 0.080527] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 30 09:41:51.101846 [ 0.087399] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Jun 30 09:41:51.116948 [ 0.091639] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages Jun 30 09:41:51.117030 [ 0.091647] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page Jun 30 09:41:51.128784 [ 0.101667] iommu: Default domain type: Translated Jun 30 09:41:51.128847 [ 0.101675] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 09:41:51.140910 [ 0.102622] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Jun 30 09:41:51.140976 [ 0.103199] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 09:41:51.150691 [ 0.103210] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 09:41:51.150753 [ 0.103842] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 09:41:51.164862 [ 0.103872] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 09:41:51.176844 [ 0.104078] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 09:41:51.176908 [ 0.104434] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 09:41:51.176956 [ 0.104444] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 09:41:51.188753 [ 0.104824] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 09:41:51.188815 [ 0.105118] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 09:41:51.200847 [ 0.105128] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 09:41:51.200910 [ 0.105424] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 09:41:51.212588 [ 0.105526] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 09:41:51.212650 [ 0.105535] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 09:41:51.224827 [ 0.105718] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 09:41:51.224891 [ 0.105935] pps_core: LinuxPPS API ver. 1 registered Jun 30 09:41:51.224918 [ 0.105941] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 09:41:51.236644 [ 0.105958] PTP clock support registered Jun 30 09:41:51.248645 [ 0.107477] NetLabel: Initializing Jun 30 09:41:51.248645 [ 0.107483] NetLabel: domain hash size = 128 Jun 30 09:41:51.248645 [ 0.107488] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Jun 30 09:41:51.260594 [ 0.107543] NetLabel: unlabeled traffic allowed by default Jun 30 09:41:51.260594 [ 0.107741] vgaarb: loaded Jun 30 09:41:51.260594 [ 0.108113] clocksource: Switched to clocksource mct-frc Jun 30 09:41:51.272681 [ 0.176511] VFS: Disk quotas dquot_6.6.0 Jun 30 09:41:51.272681 [ 0.176604] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jun 30 09:41:51.284830 [ 0.177396] AppArmor: AppArmor Filesystem Enabled Jun 30 09:41:51.284895 [ 0.186317] NET: Registered PF_INET protocol family Jun 30 09:41:51.284947 [ 0.186522] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Jun 30 09:41:51.300905 [ 0.188160] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 09:41:51.300964 [ 0.188251] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 09:41:51.309872 [ 0.188274] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Jun 30 09:41:51.321850 [ 0.188368] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Jun 30 09:41:51.321914 [ 0.188597] TCP: Hash tables configured (established 8192 bind 8192) Jun 30 09:41:51.333853 [ 0.188816] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Jun 30 09:41:51.333927 [ 0.188890] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 09:41:51.345812 [ 0.188930] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 09:41:51.357824 [ 0.189149] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 09:41:51.357881 [ 0.189183] NET: Registered PF_XDP protocol family Jun 30 09:41:51.357928 [ 0.189193] PCI: CLS 0 bytes, default 64 Jun 30 09:41:51.369804 [ 0.189667] Trying to unpack rootfs image as initramfs... Jun 30 09:41:51.369865 [ 0.189996] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Jun 30 09:41:51.381860 [ 0.190318] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Jun 30 09:41:51.393844 [ 0.192208] Initialise system trusted keyrings Jun 30 09:41:51.393920 [ 0.192295] Key type blacklist registered Jun 30 09:41:51.393970 [ 0.192550] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Jun 30 09:41:51.405804 [ 0.199991] zbud: loaded Jun 30 09:41:51.405854 [ 0.203016] integrity: Platform Keyring initialized Jun 30 09:41:51.405900 [ 0.203051] integrity: Machine keyring initialized Jun 30 09:41:51.417875 [ 0.203060] Key type asymmetric registered Jun 30 09:41:51.417943 [ 0.203068] Asymmetric key parser 'x509' registered Jun 30 09:41:51.429783 [ 1.485532] Freeing initrd memory: 25120K Jun 30 09:41:51.429861 [ 1.507575] alg: self-tests for CTR-KDF (hmac(sha256)) passed Jun 30 09:41:51.429913 [ 1.507850] bounce: pool size: 64 pages Jun 30 09:41:51.441794 [ 1.508050] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Jun 30 09:41:51.441861 [ 1.508273] io scheduler mq-deadline registered Jun 30 09:41:51.453803 [ 1.513448] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Jun 30 09:41:51.453889 [ 1.534403] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 09:41:51.465872 [ 1.534415] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 09:41:51.477803 [ 1.536766] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 09:41:51.477861 [ 1.536776] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 09:41:51.489815 [ 1.537574] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 09:41:51.501839 [ 1.537583] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 09:41:51.513767 [ 1.538433] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 09:41:51.513799 [ 1.538442] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 09:41:51.525834 [ 1.540793] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 09:41:51.537811 [ 1.543579] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 09:41:51.537866 [ 1.546345] Serial: AMBA driver Jun 30 09:41:51.537909 [ 1.546568] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 09:41:51.549824 [ 1.547041] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 09:41:51.561834 [ 1.547531] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 09:41:51.573815 [ 2.628344] printk: console [ttySAC2] enabled Jun 30 09:41:51.573877 [ 2.633161] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Jun 30 09:41:51.589800 [ 2.643807] STM32 USART driver initialized Jun 30 09:41:51.589851 [ 2.658252] mousedev: PS/2 mouse device common for all mice Jun 30 09:41:51.601777 [ 2.694965] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 09:41:51.637766 [ 2.703590] s5m-rtc s5m-rtc: setting system clock to 2024-06-30T09:41:52 UTC (1719740512) Jun 30 09:41:51.649698 [ 2.713452] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Jun 30 09:41:51.661692 [ 2.720931] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 09:41:51.661723 [ 2.728914] NET: Registered PF_INET6 protocol family Jun 30 09:41:51.673774 [ 2.753070] Segment Routing with IPv6 Jun 30 09:41:51.697807 [ 2.755316] In-situ OAM (IOAM) with IPv6 Jun 30 09:41:51.697858 [ 2.759281] mip6: Mobile IPv6 Jun 30 09:41:51.709812 [ 2.762150] NET: Registered PF_PACKET protocol family Jun 30 09:41:51.709867 [ 2.767319] mpls_gso: MPLS GSO support Jun 30 09:41:51.709920 [ 2.771333] ThumbEE CPU extension supported. Jun 30 09:41:51.721806 [ 2.775176] Registering SWP/SWPB emulation handler Jun 30 09:41:51.721866 [ 2.780415] registered taskstats version 1 Jun 30 09:41:51.721912 [ 2.784021] Loading compiled-in X.509 certificates Jun 30 09:41:51.733765 [ 3.244731] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Jun 30 09:41:52.189731 [ 3.252053] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Jun 30 09:41:52.201754 [ 3.263122] zswap: loaded using pool lzo/zbud Jun 30 09:41:52.213740 [ 3.267056] Key type .fscrypt registered Jun 30 09:41:52.213772 [ 3.270383] Key type fscrypt-provisioning registered Jun 30 09:41:52.213799 [ 3.294635] Key type encrypted registered Jun 30 09:41:52.237769 [ 3.297231] AppArmor: AppArmor sha1 policy hashing enabled Jun 30 09:41:52.249755 [ 3.302687] ima: No TPM chip found, activating TPM-bypass! Jun 30 09:41:52.249818 [ 3.308144] ima: Allocated hash algorithm: sha256 Jun 30 09:41:52.249941 [ 3.312856] ima: No architecture policies found Jun 30 09:41:52.261757 [ 3.317404] evm: Initialising EVM extended attributes: Jun 30 09:41:52.261818 [ 3.322448] evm: security.selinux Jun 30 09:41:52.261870 [ 3.325743] evm: security.SMACK64 (disabled) Jun 30 09:41:52.273749 [ 3.329995] evm: security.SMACK64EXEC (disabled) Jun 30 09:41:52.273808 [ 3.334596] evm: security.SMACK64TRANSMUTE (disabled) Jun 30 09:41:52.285696 [ 3.339630] evm: security.SMACK64MMAP (disabled) Jun 30 09:41:52.285729 [ 3.344231] evm: security.apparmor Jun 30 09:41:52.285753 [ 3.347602] evm: security.ima Jun 30 09:41:52.297712 [ 3.350567] evm: security.capability Jun 30 09:41:52.297771 [ 3.354132] evm: HMAC attrs: 0x1 Jun 30 09:41:52.297816 [ 3.943582] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 09:41:52.885814 [ 3.949575] clk: Disabling unused clocks Jun 30 09:41:52.917652 [ 3.962445] Freeing unused kernel image (initmem) memory: 2048K Jun 30 09:41:52.917793 [ 3.967315] Checked W+X mappings: passed, no W+X pages found Jun 30 09:41:52.917816 [ 3.972569] Run /init as init process Jun 30 09:41:52.921698 Loading, please wait... Jun 30 09:41:52.945684 Starting systemd-udevd version 252.26-1~deb12u2 Jun 30 09:41:53.029627 [ 4.932097] Synopsys Designware Multimedia Card Interface Driver Jun 30 09:41:53.881792 [ 4.938255] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 09:41:53.881880 [ 4.945627] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 09:41:53.893755 [ 4.964486] usbcore: registered new interface driver usbfs Jun 30 09:41:53.905731 [ 4.970222] usbcore: registered new interface driver hub Jun 30 09:41:53.917739 [ 4.979774] usbcore: registered new device driver usb Jun 30 09:41:53.929727 [ 4.989948] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 09:41:53.941713 [ 5.010593] phy phy-12130000.phy.2: phy_power_on was called before phy_init Jun 30 09:41:53.953740 [ 5.018719] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 30 09:41:53.965806 [ 5.024543] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 30 09:41:53.977744 [ 5.036492] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 30 09:41:53.977809 [ 5.041521] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 30 09:41:53.989763 [ 5.043423] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 09:41:53.989825 [ 5.053008] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 30 09:41:54.001761 [ 5.058800] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 30 09:41:54.001822 [ 5.088026] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 09:41:54.037731 [ 5.095590] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 109,32 bit host data width,128 deep fifo Jun 30 09:41:54.049741 [ 5.108000] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Jun 30 09:41:54.061725 [ 5.120471] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Jun 30 09:41:54.061788 [ 5.125106] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo Jun 30 09:41:54.073748 [ 5.146241] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 09:41:54.097787 [ 5.154378] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 09:41:54.097825 [ 5.172627] mmc_host mmc1: card is polling. Jun 30 09:41:54.121821 [ 5.175643] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 09:41:54.121892 [ 5.183671] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 09:41:54.133801 [ 5.190836] usb usb1: Product: EHCI Host Controller Jun 30 09:41:54.133882 [ 5.195679] usb usb1: Manufacturer: Linux 6.1.0-22-armmp-lpae ehci_hcd Jun 30 09:41:54.145743 [ 5.202186] usb usb1: SerialNumber: 12110000.usb Jun 30 09:41:54.145803 [ 5.215500] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 09:41:54.169717 [ 5.231576] hub 1-0:1.0: USB hub found Jun 30 09:41:54.181714 [ 5.241734] phy phy-12130000.phy.2: phy_power_on was called before phy_init Jun 30 09:41:54.193741 [ 5.245224] hub 1-0:1.0: 3 ports detected Jun 30 09:41:54.193800 [ 5.256035] exynos-ohci 12120000.usb: USB Host Controller Jun 30 09:41:54.205723 [ 5.256781] SCSI subsystem initialized Jun 30 09:41:54.205782 [ 5.275863] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Jun 30 09:41:54.229726 [ 5.290926] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 30 09:41:54.241776 [ 5.297105] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 30 09:41:54.241843 [ 5.304206] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 09:41:54.253772 [ 5.314149] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 30 09:41:54.265774 [ 5.314667] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Jun 30 09:41:54.265836 [ 5.327463] mmc0: new high speed SDHC card at address aaaa Jun 30 09:41:54.277752 [ 5.333395] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 30 09:41:54.277817 [ 5.339963] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Jun 30 09:41:54.289739 [ 5.348806] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 30 09:41:54.301729 [ 5.361505] mmcblk0: mmc0:aaaa SU04G 3.69 GiB Jun 30 09:41:54.301788 [ 5.369523] scsi host0: ahci-dwc Jun 30 09:41:54.313740 [ 5.371737] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 110 Jun 30 09:41:54.325698 [ 5.394521] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 30 09:41:54.349751 [ 5.396303] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Jun 30 09:41:54.349822 [ 5.411075] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 09:41:54.361764 [ 5.418300] usb usb2: Product: USB Host Controller Jun 30 09:41:54.361823 [ 5.423060] usb usb2: Manufacturer: Linux 6.1.0-22-armmp-lpae ohci_hcd Jun 30 09:41:54.373774 [ 5.429570] usb usb2: SerialNumber: 12120000.usb Jun 30 09:41:54.373833 [ 5.434257] mmc1: new DDR MMC card at address 0001 Jun 30 09:41:54.385707 [ 5.448818] hub 2-0:1.0: USB hub found Jun 30 09:41:54.397705 [ 5.470737] hub 2-0:1.0: 3 ports detected Jun 30 09:41:54.409713 [ 5.482465] mmcblk1: mmc1:0001 M4G1FB 3.64 GiB Jun 30 09:41:54.421714 [ 5.492300] mmcblk1: p1 p2 p3 p4 Jun 30 09:41:54.433710 [ 5.501818] mmcblk1boot0: mmc1:0001 M4G1FB 1.00 MiB Jun 30 09:41:54.445719 [ 5.522629] mmcblk1boot1: mmc1:0001 M4G1FB 1.00 MiB Jun 30 09:41:54.469721 [ 5.534287] mmcblk1rpmb: mmc1:0001 M4G1FB 128 KiB, chardev (241:0) Jun 30 09:41:54.481725 [ 5.856188] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 30 09:41:54.805771 [ 5.861752] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 30 09:41:54.805836 [ 5.867608] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 30 09:41:54.817769 [ 5.875063] ata1.00: configured for UDMA/133 Jun 30 09:41:54.817828 [ 5.878794] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 30 09:41:54.829713 [ 5.955901] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 09:41:54.901864 [ 5.959979] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 09:41:54.913821 [ 5.968425] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Jun 30 09:41:54.913934 [ 5.972192] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 09:41:54.925785 [ 5.977090] xhci-hcd xhci-hcd.2.auto: irq 111, io mem 0x12000000 Jun 30 09:41:54.937755 [ 5.992783] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 09:41:54.937818 [ 5.997909] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 09:41:54.949771 [ 6.005596] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 09:41:54.949834 [ 6.012363] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 09:41:54.961824 [ 6.020284] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 09:41:54.973818 [ 6.027494] usb usb3: Product: xHCI Host Controller Jun 30 09:41:54.973901 [ 6.032337] usb usb3: Manufacturer: Linux 6.1.0-22-armmp-lpae xhci-hcd Jun 30 09:41:54.985694 [ 6.038847] usb usb3: SerialNumber: xhci-hcd.2.auto Jun 30 09:41:54.985727 [ 6.044432] hub 3-0:1.0: USB hub found Jun 30 09:41:54.985752 [ 6.047478] hub 3-0:1.0: 1 port detected Jun 30 09:41:54.997759 [ 6.049410] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 30 09:41:54.997828 [ 6.052042] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 09:41:55.009767 [ 6.058843] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 30 09:41:55.009826 [ 6.068205] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Jun 30 09:41:55.021766 [ 6.080328] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 09:41:55.033772 [ 6.081007] sd 0:0:0:0: [sda] Write Protect is off Jun 30 09:41:55.033831 [ 6.090052] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 09:41:55.045771 [ 6.090061] usb usb4: Product: xHCI Host Controller Jun 30 09:41:55.045830 [ 6.102029] usb usb4: Manufacturer: Linux 6.1.0-22-armmp-lpae xhci-hcd Jun 30 09:41:55.057772 [ 6.106987] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 30 09:41:55.069747 [ 6.113396] usb usb4: SerialNumber: xhci-hcd.2.auto Jun 30 09:41:55.069808 [ 6.115091] hub 4-0:1.0: USB hub found Jun 30 09:41:55.069853 [ 6.122586] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 30 09:41:55.081720 [ 6.127347] hub 4-0:1.0: 1 port detected Jun 30 09:41:55.081778 [ 6.168226] sda: sda1 sda2 < sda5 > Jun 30 09:41:55.117727 [ 6.170951] sd 0:0:0:0: [sda] Attached SCSI disk Jun 30 09:41:55.117788 [ 6.180503] I/O error, dev mmcblk0, sector 7744000 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 2 Jun 30 09:41:55.129726 [ 6.289616] I/O error, dev mmcblk0, sector 7744001 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 2 Jun 30 09:41:55.237716 [ 6.397675] I/O error, dev mmcblk0, sector 7744002 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 2 Jun 30 09:41:55.345753 [ 6.505738] I/O error, dev mmcblk0, sector 7744003 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 2 Jun 30 09:41:55.453746 [ 6.613805] I/O error, dev mmcblk0, sector 7744004 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 2 Jun 30 09:41:55.561767 [ 6.721848] I/O error, dev mmcblk0, sector 7744005 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 2 Jun 30 09:41:55.669745 [ 6.829898] I/O error, dev mmcblk0, sector 7744006 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 2 Jun 30 09:41:55.777747 [ 6.937922] I/O error, dev mmcblk0, sector 7744007 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 2 Jun 30 09:41:55.885650 [ 7.045956] I/O error, dev mmcblk0, sector 7744008 op 0x0:(READ) flags 0x80700 phys_seg 13 prio class 2 Jun 30 09:41:55.993631 [ 7.153998] I/O error, dev mmcblk0, sector 7744009 op 0x0:(READ) flags 0x80700 phys_seg 13 prio class 2 Jun 30 09:41:56.101653 [ 7.236135] random: crng init done Jun 30 09:41:56.185622 [ 7.344970] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. Jun 30 09:41:56.293698 [ 7.355801] device-mapper: uevent: version 1.0.3 Jun 30 09:41:56.305743 [ 7.364194] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Jun 30 09:41:56.317687 [ 9.968334] Buffer I/O error on dev mmcblk0, logical block 968000, async page read Jun 30 09:41:58.921606 Begin: Loading essential drivers ... done. Jun 30 09:41:58.969585 Begin: Running /scripts/init-premount ... done. Jun 30 09:42:01.984487 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 30 09:42:01.996528 Begin: Running /scripts/local-premount ... done. Jun 30 09:42:02.092518 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 30 09:42:02.140492 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 30 09:42:02.236476 /dev/mapper/arndale--metrocentre--vg-root: clean, 39331/1220608 files, 377971/4882432 blocks Jun 30 09:42:02.497746 done. Jun 30 09:42:02.509588 [ 13.701878] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 30 09:42:02.653742 [ 13.943064] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. Jun 30 09:42:02.893724 done. Jun 30 09:42:02.893776 Begin: Running /scripts/local-bottom ... done. Jun 30 09:42:02.941740 Begin: Running /scripts/init-bottom ... done. Jun 30 09:42:02.977679 [ 14.265227] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. Jun 30 09:42:03.217747 INIT: version 3.06 booting Jun 30 09:42:03.529707 INIT: No inittab.d directory found Jun 30 09:42:03.625589 Using makefile-style concurrent boot in runlevel S. Jun 30 09:42:03.997724 Starting hotplug events dispatcher: systemd-udevd. Jun 30 09:42:05.617718 Synthesizing the initial hotplug events (subsystems)...done. Jun 30 09:42:05.857725 Synthesizing the initial hotplug events (devices)...done. Jun 30 09:42:06.424460 Waiting for /dev to be fully populated...[ 17.763585] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 09:42:06.712474 [ 17.803030] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 30 09:42:06.748441 [ 17.812766] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jun 30 09:42:06.760572 [ 17.888273] panfrost 11800000.gpu: clock rate = 533000000 Jun 30 09:42:06.832431 [ 18.019974] panfrost 11800000.gpu: mali-t600 id 0x600 major 0x0 minor 0x0 status 0x1 Jun 30 09:42:06.976503 [ 18.026267] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,31b4dfff Jun 30 09:42:06.976503 [ 18.034447] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 Jun 30 09:42:06.988708 [ 18.046133] panfrost 11800000.gpu: shader_present=0xf l2_present=0x1 Jun 30 09:42:07.000561 [ 18.075944] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 09:42:07.024505 [ 18.078632] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 0 Jun 30 09:42:07.036474 [ 18.108153] usb3503 usb-hub: switched to HUB mode Jun 30 09:42:07.060475 [ 18.111382] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 09:42:07.060475 [ 18.146259] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 09:42:07.096499 [ 18.283262] blk_print_req_error: 24 callbacks suppressed Jun 30 09:42:07.228501 [ 18.283301] I/O error, dev mmcblk0, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 09:42:07.240476 [ 18.397214] I/O error, dev mmcblk0, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 09:42:07.348493 [ 18.441772] usb 1-3: new high-speed USB device number 2 using exynos-ehci Jun 30 09:42:07.396535 [ 18.516454] I/O error, dev mmcblk0, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 09:42:07.468477 [ 18.613791] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Jun 30 09:42:07.564499 [ 18.620718] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jun 30 09:42:07.576508 [ 18.628069] I/O error, dev mmcblk0, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 09:42:07.576508 [ 18.643337] exynos4-fb 14400000.fimd: deferred probe timeout, ignoring dependency Jun 30 09:42:07.588475 [ 18.652430] exynos-mixer 14450000.mixer: deferred probe timeout, ignoring dependency Jun 30 09:42:07.600495 [ 18.653573] hub 1-3:1.0: USB hub found Jun 30 09:42:07.612635 [ 18.665212] hub 1-3:1.0: 3 ports detected Jun 30 09:42:07.612724 [ 18.724828] OF: graph: no port node found in /soc/hdmi@14530000 Jun 30 09:42:07.672473 [ 18.738214] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations Jun 30 09:42:07.684495 [ 18.744518] exynos-drm exynos-drm: bound 14400000.fimd (ops fimd_component_ops [exynosdrm]) Jun 30 09:42:07.696510 [ 18.754025] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops [exynosdrm]) Jun 30 09:42:07.708459 [ 18.769420] exynos-drm exynos-drm: bound 14500000.dsi (ops exynos_dsi_component_ops [exynosdrm]) Jun 30 09:42:07.720478 [ 18.792773] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_component_ops [exynosdrm]) Jun 30 09:42:07.744506 [ 18.794923] I/O error, dev mmcblk0, sector 7743712 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 2 Jun 30 09:42:07.756482 [ 18.815456] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Jun 30 09:42:07.768493 [ 18.820930] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Jun 30 09:42:07.768493 [ 18.833063] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 Jun 30 09:42:07.780478 [ 18.909326] I/O error, dev mmcblk0, sector 7743713 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 2 Jun 30 09:42:07.864459 [ 18.960173] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Jun 30 09:42:07.909749 [ 19.030880] I/O error, dev mmcblk0, sector 7743715 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 2 Jun 30 09:42:07.981674 [ 19.082266] usb 1-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=77.32 Jun 30 09:42:08.029759 [ 19.089355] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Jun 30 09:42:08.041745 [ 19.096560] usb 1-3.2: Product: USB2.0 Hub Jun 30 09:42:08.041803 [ 19.102617] hub 1-3.2:1.0: USB hub found Jun 30 09:42:08.053717 [ 19.105748] hub 1-3.2:1.0: 4 ports detected Jun 30 09:42:08.053776 [ 19.336303] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 09:42:08.284457 [ 19.408223] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 30 09:42:08.356583 [ 19.427086] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 09:42:08.380422 [ 19.534571] usb 1-3.2.4: New USB device found, idVendor=0b95, idProduct=772a, bcdDevice= 0.01 Jun 30 09:42:08.488459 [ 19.542098] usb 1-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 30 09:42:08.488459 [ 19.549353] usb 1-3.2.4: Product: AX88772 Jun 30 09:42:08.500460 [ 19.553409] usb 1-3.2.4: Manufacturer: ASIX Elec. Corp. Jun 30 09:42:08.500460 [ 19.558583] usb 1-3.2.4: SerialNumber: 000001 Jun 30 09:42:08.510824 [ 19.563016] I/O error, dev mmcblk0, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 09:42:08.510903 [ 19.672428] I/O error, dev mmcblk0, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 09:42:08.620449 [ 19.780757] I/O error, dev mmcblk0, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 09:42:08.728583 [ 19.888843] Buffer I/O error on dev mmcblk0, logical block 967954, async page read Jun 30 09:42:08.836408 [ 20.167151] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 30 09:42:09.124592 [ 20.855140] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 09:42:09.812388 [ 20.871177] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Jun 30 09:42:09.824453 [ 20.883549] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 86:35:c6:42:ef:2d Jun 30 09:42:09.836465 [ 20.894303] usbcore: registered new interface driver asix Jun 30 09:42:09.848397 done. Jun 30 09:42:10.160377 [ 21.690744] EXT4-fs (dm-0): re-mounted. Quota mode: none. Jun 30 09:42:10.640623 Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). Jun 30 09:42:10.676594 Checking file systems.../dev/sda1: clean, 922/61056 files, 25375/243968 blocks Jun 30 09:42:12.128504 done. Jun 30 09:42:12.188528 Cleaning up temporary files... /tmp. Jun 30 09:42:12.452549 [ 23.725258] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 30 09:42:12.680527 [ 23.777388] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Jun 30 09:42:12.728562 [ 24.034054] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k FS Jun 30 09:42:12.992712 Mounting local filesystems...done. Jun 30 09:42:13.364525 Activating swapfile swap, if any...done. Jun 30 09:42:13.376516 Cleaning up temporary files.... Jun 30 09:42:13.452503 Starting Setting kernel variables: sysctl. Jun 30 09:42:13.644413 [ 25.312295] audit: type=1400 audit(1719740533.964:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=907 comm="apparmor_parser" Jun 30 09:42:14.268598 [ 25.330646] audit: type=1400 audit(1719740533.980:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=907 comm="apparmor_parser" Jun 30 09:42:14.338313 [ 25.346271] audit: type=1400 audit(1719740533.980:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=906 comm="apparmor_parser" Jun 30 09:42:14.338322 [ 25.532420] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Jun 30 09:42:14.480545 [ 25.734604] audit: type=1400 audit(1719740534.384:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=943 comm="apparmor_parser" Jun 30 09:42:14.696574 [ 25.754109] audit: type=1400 audit(1719740534.400:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=943 comm="apparmor_parser" Jun 30 09:42:14.708596 [ 25.767562] audit: type=1400 audit(1719740534.404:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=943 comm="apparmor_parser" Jun 30 09:42:14.732536 [ 26.073862] audit: type=1400 audit(1719740534.724:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=942 comm="apparmor_parser" Jun 30 09:42:15.032603 [ 26.092285] audit: type=1400 audit(1719740534.724:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=942 comm="apparmor_parser" Jun 30 09:42:15.056581 [ 26.108192] audit: type=1400 audit(1719740534.724:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=942 comm="apparmor_parser" Jun 30 09:42:15.068586 [ 26.125693] audit: type=1400 audit(1719740534.724:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=942 comm="apparmor_parser" Jun 30 09:42:15.080584 Starting: AppArmorLoading AppArmor profiles...done. Jun 30 09:42:15.092548 . Jun 30 09:42:15.092548 [ 27.685821] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 30 09:42:16.641743 [ 27.691865] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jun 30 09:42:16.641817 Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1 Jun 30 09:42:18.285831 Copyright 2004-2022 Internet Systems Consortium. Jun 30 09:42:18.297742 All rights reserved. Jun 30 09:42:18.297797 For info, please visit https://www.isc.org/software/dhcp/ Jun 30 09:42:18.297845 Jun 30 09:42:18.297882 Listening on LPF/eth0/9e:04:00:59:64:5a Jun 30 09:42:18.297925 Sending on LPF/eth0/9e:04:00:59:64:5a Jun 30 09:42:18.309747 Sending on Socket/fallback Jun 30 09:42:18.309804 Created duid "\000\001\000\001.\023\344\366\236\004\000YdZ". Jun 30 09:42:18.309852 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 Jun 30 09:42:18.321697 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 Jun 30 09:42:20.893769 DHCPOFFER of 10.149.64.44 from 10.149.64.4 Jun 30 09:42:20.893844 DHCPREQUEST for 10.149.64.44 on eth0 to 255.255.255.255 port 67 Jun 30 09:42:20.905746 DHCPACK of 10.149.64.44 from 10.149.64.4 Jun 30 09:42:20.905804 bound to 10.149.64.44 -- renewal in 264 seconds. Jun 30 09:42:20.917649 done. Jun 30 09:42:20.917701 Cleaning up temporary files.... Jun 30 09:42:20.965669 Starting nftables: none Jun 30 09:42:21.073681 . Jun 30 09:42:21.517758 INIT: Entering runlevel: 2 Jun 30 09:42:21.577570 Using makefile-style concurrent boot in runlevel 2. Jun 30 09:42:21.637694 Starting Apache httpd web server: apache2. Jun 30 09:42:23.653714 Starting periodic command scheduler: cron. Jun 30 09:42:24.061697 Starting NTP server: ntpd2024-06-30T09:42:24 ntpd[1132]: INIT: ntpd ntpsec-1.2.2: Starting Jun 30 09:42:24.433780 2024-06-30T09:42:24 ntpd[1132]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 30 09:42:24.445730 . Jun 30 09:42:24.445780 Starting system message bus: dbus. Jun 30 09:42:24.529801 Starting OpenBSD Secure Shell server: sshd. Jun 30 09:42:24.853729 Jun 30 09:42:26.161739 Debian GNU/Linux 12 arndale-metrocentre ttySAC2 Jun 30 09:42:26.173749 Jun 30 09:42:26.173806 arndale-metrocentre login: INIT: Switching to r INIT: No inittab.d directorUsing makefile-style concurrent boot in runlevel 6. Jun 30 09:47:42.061783 Stopping libvirt management daemon: libvirtdNo /usr/local/sbin/libvirtd found running; none killed. Jun 30 09:47:42.121650 . Jun 30 09:47:42.121682 Stopping SMP IRQ Balancer: irqbalance. Jun 30 09:47:42.133634 Stopping hotplug events dispatcher: systemd-udevd. Jun 30 09:47:42.133667 Stopping nftables: none. Jun 30 09:47:42.145672 Saving the system clock to /dev/rtc0. Jun 30 09:47:42.325682 Hardware Clock updated to Sun Jun 30 09:47:42 UTC 2024. Jun 30 09:47:42.337573 Stopping Apache httpd web server: apache2. Jun 30 09:47:43.345638 Asking all remaining processes to terminate...done. Jun 30 09:47:43.645681 All processes ended within 1 seconds...done. Jun 30 09:47:43.657576 Deconfiguring network interfaces...ifdown: ignoring unknown interface eth0=eth0 Jun 30 09:47:43.777684 done. Jun 30 09:47:43.777735 [ 355.063354] EXT4-fs (sda1): unmounting filesystem. Jun 30 09:47:44.005756 Deactivating swap...done. Jun 30 09:47:44.065681 Unmounting local filesystems...done. Jun 30 09:47:44.077722 [ 355.463084] EXT4-fs (dm-0): re-mounted. Quota mode: none. Jun 30 09:47:44.413688 Will now restart. Jun 30 09:47:44.641779 [ 355.731285] asix 1-3.2.4:1.0 eth0: Link is Down Jun 30 09:47:44.677709 [ 355.801316] sd 0:0:0:0: [sda] Synchronizing SCSI cache Jun 30 09:47:44.749736 [ 355.808864] wake enabled for irq 101 (gpx1-4) Jun 30 09:47:44.749797 [ 355.811747] wake enabled for irq 102 (gpx1-5) Jun 30 09:47:44.761751 [ 355.816114] wake enabled for irq 103 (gpx1-6) Jun 30 09:47:44.761812 [ 355.820444] wake enabled for irq 104 (gpx1-7) Jun 30 09:47:44.761860 [ 355.824784] wake enabled for irq 105 (gpx2-0) Jun 30 09:47:44.773726 [ 355.829122] wake enabled for irq 106 (gpx2-1) Jun 30 09:47:44.773787 [ 355.833951] reboot: Reű Jun 30 09:47:45.109734 Jun 30 09:47:45.109811 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 09:47:45.124609 Jun 30 09:47:45.124609 CPU: Exynos5250@1000MHz Jun 30 09:47:45.124609 Jun 30 09:47:45.124609 Board: Arndale Jun 30 09:47:45.124609 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 09:47:45.124609 ready Jun 30 09:47:45.124609 DRAM: 2 GiB Jun 30 09:47:45.124609 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 09:47:45.148550 trace: enabled Jun 30 09:47:45.184527 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 09:47:45.548532 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 09:47:45.608500 In: serial Jun 30 09:47:45.608500 Out: serial Jun 30 09:47:45.608500 Err: serial Jun 30 09:47:45.608500 SCSI: ARNDALE SCSI INIT Jun 30 09:47:45.608500 Target spinup took 0 ms. Jun 30 09:47:45.620582 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 09:47:45.620582 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 09:47:45.620582 Net: Net Initialization Skipped Jun 30 09:47:45.632560 No ethernet found. Jun 30 09:47:45.632560 Hostname: arndale-metrocentre Jun 30 09:47:45.632560 Hit any key to stop autoboot: 2  1  0 Jun 30 09:47:47.553731 (Re)start USB... Jun 30 09:47:47.553807 USB0: USB EHCI 1.00 Jun 30 09:47:47.565705 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 09:47:53.157662 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 09:47:53.181215 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 09:47:53.613705 Waiting for Ethernet connection... done. Jun 30 09:47:55.257702 BOOTP broadcast 1 Jun 30 09:47:55.257767 BOOTP broadcast 2 Jun 30 09:47:56.661766 DHCP client bound to address 10.149.64.44 (1458 ms) Jun 30 09:47:56.661848 Using asx0 device Jun 30 09:47:56.661890 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 09:47:56.661945 Filename 'pxelinux.0'. Jun 30 09:47:56.673737 Load address: 0x43e00000 Jun 30 09:47:56.673797 Loading: *### Jun 30 09:47:56.685696 2.5 MiB/s Jun 30 09:47:56.685749 done Jun 30 09:47:56.685788 Bytes transferred = 42430 (a5be hex) Jun 30 09:47:56.697753 missing environment variable: pxeuuid Jun 30 09:47:56.697811 Retrieving file: pxelinux.cfg/0A95402C Jun 30 09:47:56.697855 Using asx0 device Jun 30 09:47:56.697895 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 09:47:56.709738 Filename 'pxelinux.cfg/0A95402C'. Jun 30 09:47:56.709796 Load address: 0x51000000 Jun 30 09:47:56.709838 Loading: *# Jun 30 09:47:56.709878 31.3 KiB/s Jun 30 09:47:56.709916 done Jun 30 09:47:56.709954 Bytes transferred = 65 (41 hex) Jun 30 09:47:56.721730 Config file found Jun 30 09:47:56.721784 Ignoring unknown command: serial Jun 30 09:47:56.721828 1: local Jun 30 09:47:56.721867 scanning bus for devices... Jun 30 09:47:56.721908 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 09:47:56.757743 Type: Hard Disk Jun 30 09:47:56.757798 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 09:47:56.769738 Found 1 device(s). Jun 30 09:47:56.769792 Jun 30 09:47:56.769831 SCSI device 0: Jun 30 09:47:56.769871 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 09:47:56.781688 Type: Hard Disk Jun 30 09:47:56.781718 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 09:47:56.781766 ... is now current device Jun 30 09:47:56.781807 Scanning scsi 0... Jun 30 09:47:56.793667 Found U-Boot script /boot.scr Jun 30 09:47:56.961692 1744 bytes read in 34 ms (49.8 KiB/s) Jun 30 09:47:57.009693 ## Executing script at 50000000 Jun 30 09:47:57.009756 Loading dtbs/6.1.96+/exynos5250-arndale.dtb Jun 30 09:47:57.009804 46686 bytes read in 2563 ms (17.6 KiB/s) Jun 30 09:47:59.493678 1048588 bytes read in 121 ms (8.3 MiB/s) Jun 30 09:47:59.637604 Loaded xen-4.19-unstable to 0x41000000 (10000c) Jun 30 09:47:59.637636 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan Jun 30 09:47:59.649702 10035712 bytes read in 519 ms (18.4 MiB/s) Jun 30 09:48:00.177721 Loaded vmlinuz-6.1.96+ to 0x42000000 (992200) Jun 30 09:48:00.177810 command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 09:48:00.201706 12052959 bytes read in 514 ms (22.4 MiB/s) Jun 30 09:48:00.717730 Loaded initrd.img-6.1.96+ to 0x43300000 (b7e9df) Jun 30 09:48:00.717789 chosen { Jun 30 09:48:00.717830 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan"; Jun 30 09:48:00.729767 #size-cells = <0x00000001>; Jun 30 09:48:00.741743 #address-cells = <0x00000001>; Jun 30 09:48:00.741800 stdout-path = "serial2:115200n8"; Jun 30 09:48:00.741845 module@1 { Jun 30 09:48:00.741884 reg = <0x43300000 0x00b7e9df>; Jun 30 09:48:00.741926 compatible = "xen,linux-initrd", "xen,multiboot-module"; Jun 30 09:48:00.753757 }; Jun 30 09:48:00.753809 module@0 { Jun 30 09:48:00.753850 bootargs = "ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Jun 30 09:48:00.765768 reg = <0x42000000 0x00992200>; Jun 30 09:48:00.777744 compatible = "xen,linux-zimage", "xen,multiboot-module"; Jun 30 09:48:00.777806 }; Jun 30 09:48:00.777846 }; Jun 30 09:48:00.777883 Booting 0x41000000 - 0x43000000 Jun 30 09:48:00.777925 Kernel image @ 0x41000000 [ 0x000000 - 0x13d000 ] Jun 30 09:48:00.789743 ## Flattened Device Tree blob at 43000000 Jun 30 09:48:00.789801 Booting using the fdt blob at 0x43000000 Jun 30 09:48:00.789847 reserving fdt memory region: addr=43000000 size=c000 Jun 30 09:48:00.801699 Loading Device Tree to 4fff1000, end 4fffffff ... OK Jun 30 09:48:00.801759 Jun 30 09:48:00.813693 Starting kernel ...(fake run for tracing) Jun 30 09:48:00.813754 Jun 30 09:48:00.813792 Jun 30 09:48:00.813829 Starting kernel ... Jun 30 09:48:00.813869 Jun 30 09:48:00.813905 __ __ _ _ _ ___ _ _ _ Jun 30 09:48:00.861722 \ \/ /___ _ __ | || | / |/ _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Jun 30 09:48:00.873778 \ // _ \ '_ \ | || |_ | | (_) |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Jun 30 09:48:00.885740 / \ __/ | | | |__ _|| |\__, |__| |_| | | | \__ \ || (_| | |_) | | __/ Jun 30 09:48:00.885802 /_/\_\___|_| |_| |_|(_)_| /_/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Jun 30 09:48:00.897753 Jun 30 09:48:00.897804 (XEN) Xen version 4.19-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Sun Jun 30 04:46:21 UTC 2024 Jun 30 09:48:00.909737 (XEN) Latest ChangeSet: Wed Jun 26 16:07:30 2024 +0100 git:08f9b1dd9c-dirty Jun 30 09:48:00.909802 (XEN) build-id: a680bf34d2b64bef710e3f1f7a1f083566429466 Jun 30 09:48:00.921734 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Jun 30 09:48:00.921798 (XEN) 32-bit Execution: Jun 30 09:48:00.921841 (XEN) Processor Features: 00001031:00011011 Jun 30 09:48:00.933743 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Jun 30 09:48:00.933804 (XEN) Extensions: GenericTimer Security Jun 30 09:48:00.933849 (XEN) Debug Features: 02010555 Jun 30 09:48:00.945735 (XEN) Auxiliary Features: 00000000 Jun 30 09:48:00.945793 (XEN) Memory Model Features: 10201105 20000000 Jun 30 09:48:00.945839 (XEN) 01240000 02102211 Jun 30 09:48:00.957749 (XEN) ISA Features: 02101110 13112111 21232041 Jun 30 09:48:00.957808 (XEN) 11112131 10011142 00000000 Jun 30 09:48:00.957854 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Jun 30 09:48:00.969755 (XEN) Set SYSRAM to 0000000041000074 (00200074) Jun 30 09:48:00.981669 (XEN) SMP: Allowing 2 CPUs Jun 30 09:48:00.981698 (XEN) enabled workaround for: ARM erratum 766422 Jun 30 09:48:00.981723 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Jun 30 09:48:00.993616 (XEN) GICv2 initialization: Jun 30 09:48:00.993655 (XEN) gic_dist_addr=0000000010481000 Jun 30 09:48:00.993681 (XEN) gic_cpu_addr=0000000010482000 Jun 30 09:48:01.005612 (XEN) gic_hyp_addr=0000000010484000 Jun 30 09:48:01.005640 (XEN) gic_vcpu_addr=0000000010486000 Jun 30 09:48:01.005664 (XEN) gic_maintenance_irq=25 Jun 30 09:48:01.017617 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Jun 30 09:48:01.017648 (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2) Jun 30 09:48:01.017677 (XEN) Initializing Credit2 scheduler Jun 30 09:48:01.029690 (XEN) load_precision_shift: 18 Jun 30 09:48:01.029739 (XEN) load_window_shift: 30 Jun 30 09:48:01.029781 (XEN) underload_balance_tolerance: 0 Jun 30 09:48:01.029824 (XEN) overload_balance_tolerance: -3 Jun 30 09:48:01.041694 (XEN) runqueues arrangement: socket Jun 30 09:48:01.041745 (XEN) cap enforcement granularity: 10ms Jun 30 09:48:01.041789 (XEN) load tracking window length 1073741824 ns Jun 30 09:48:01.053689 (XEN) Allocated console ring of 16 KiB. Jun 30 09:48:01.053740 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Jun 30 09:48:01.053789 (XEN) CPU0: Guest atomics will try 2 times before pausing the domain Jun 30 09:48:01.065615 (XEN) Bringing up CPU1 Jun 30 09:48:01.065641 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Jun 30 09:48:01.077613 (XEN) Brought up 2 CPUs Jun 30 09:48:01.077640 (XEN) CPU 1 booted. Jun 30 09:48:01.077662 (XEN) I/O virtualisation disabled Jun 30 09:48:01.077685 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Jun 30 09:48:01.089673 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Jun 30 09:48:01.089702 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Jun 30 09:48:01.089728 (XEN) Initializing Credit2 scheduler Jun 30 09:48:01.101729 (XEN) load_precision_shift: 18 Jun 30 09:48:01.101786 (XEN) load_window_shift: 30 Jun 30 09:48:01.101829 (XEN) underload_balance_tolerance: 0 Jun 30 09:48:01.101872 (XEN) overload_balance_tolerance: -3 Jun 30 09:48:01.113689 (XEN) runqueues arrangement: socket Jun 30 09:48:01.113739 (XEN) cap enforcement granularity: 10ms Jun 30 09:48:01.113784 (XEN) load tracking window length 1073741824 ns Jun 30 09:48:01.125626 (XEN) Adding cpu 0 to runqueue 0 Jun 30 09:48:01.125653 (XEN) First cpu on runqueue, activating Jun 30 09:48:01.125677 (XEN) Adding cpu 1 to runqueue 0 Jun 30 09:48:01.125700 (XEN) alternatives: Patching with alt table 002d2cc8 -> 002d2da0 Jun 30 09:48:01.137690 (XEN) CPU0 will execute ICIALLU on guest exit Jun 30 09:48:01.137741 (XEN) CPU1 will execute ICIALLU on guest exit Jun 30 09:48:01.149709 (XEN) *** LOADING DOMAIN 0 *** Jun 30 09:48:01.149759 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Jun 30 09:48:01.149806 (XEN) Loading ramdisk from boot module @ 0000000043300000 Jun 30 09:48:01.161677 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Jun 30 09:48:01.161729 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Jun 30 09:48:01.701678 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Jun 30 09:48:01.713570 (XEN) Allocating PPI 16 for event channel interrupt Jun 30 09:48:01.737663 (XEN) d0: extended regions not supported for 32-bit guests Jun 30 09:48:01.749594 (XEN) Loading zImage from 0000000042000000 to 0000000067600000-0000000067f92200 Jun 30 09:48:01.749625 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d7e9df Jun 30 09:48:01.845718 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b4c6 Jun 30 09:48:01.941717 (XEN) Initial low memory virq threshold set at 0x4000 pages. Jun 30 09:48:01.953752 (XEN) Scrubbing Free RAM in background Jun 30 09:48:01.953810 (XEN) Std. Loglevel: All Jun 30 09:48:01.953853 (XEN) Guest Loglevel: All Jun 30 09:48:01.965740 (XEN) *************************************************** Jun 30 09:48:01.965799 (XEN) WARNING: SILO mode is not enabled. Jun 30 09:48:01.965844 (XEN) It has implications on the security of the system, Jun 30 09:48:01.977766 (XEN) unless the communications have been forbidden between Jun 30 09:48:01.977829 (XEN) untrusted domains. Jun 30 09:48:01.977871 (XEN) *************************************************** Jun 30 09:48:01.989695 (XEN) 3... 2... 1... Jun 30 09:48:04.989712 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 30 09:48:05.017535 (XEN) Freed 324kB init memory. Jun 30 09:48:05.017604 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 09:48:06.057649 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Jun 30 09:48:06.081696 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Jun 30 09:48:06.081730 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Jun 30 09:48:06.093695 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Jun 30 09:48:06.093730 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 09:48:06.105616 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 09:48:06.141702 [ 0.000000] Linux version 6.1.96+ (osstest@himrod1) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Sun Jun 30 02:58:42 UTC 2024 Jun 30 09:48:06.153714 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 30 09:48:06.165707 [ 0.000000] CPU: div instructions available: patching division code Jun 30 09:48:06.165742 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 09:48:06.177707 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 09:48:06.189691 [ 0.000000] Memory policy: Data cache writealloc Jun 30 09:48:06.189724 [ 0.000000] Xen 4.19 support found Jun 30 09:48:06.189748 [ 0.000000] efi: UEFI not found. Jun 30 09:48:06.201688 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 Jun 30 09:48:06.201721 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 09:48:06.201746 [ 0.000000] Zone ranges: Jun 30 09:48:06.213680 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Jun 30 09:48:06.213714 [ 0.000000] Normal empty Jun 30 09:48:06.213738 [ 0.000000] HighMem empty Jun 30 09:48:06.225695 [ 0.000000] Movable zone start for each node Jun 30 09:48:06.225728 [ 0.000000] Early memory node ranges Jun 30 09:48:06.225752 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Jun 30 09:48:06.237692 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Jun 30 09:48:06.237727 [ 0.000000] psci: probing for conduit method from DT. Jun 30 09:48:06.249697 [ 0.000000] psci: PSCIv1.1 detected in firmware. Jun 30 09:48:06.249730 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Jun 30 09:48:06.261664 [ 0.000000] psci: Trusted OS migration not required Jun 30 09:48:06.261664 [ 0.000000] psci: SMC Calling Convention v1.2 Jun 30 09:48:06.261664 [ 0.000000] percpu: Embedded 16 pages/cpu s35412 r8192 d21932 u65536 Jun 30 09:48:06.273708 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 Jun 30 09:48:06.273748 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 09:48:06.297703 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 09:48:06.309683 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Jun 30 09:48:06.309720 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Jun 30 09:48:06.321708 [ 0.000000] Memory: 416852K/524288K available (14336K kernel code, 2180K rwdata, 5600K rodata, 2048K init, 438K bss, 41900K reserved, 65536K cma-reserved, 0K highmem) Jun 30 09:48:06.333705 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 09:48:06.345696 [ 0.000000] trace event string verifier disabled Jun 30 09:48:06.345754 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 09:48:06.345782 [ 0.000000] rcu: RCU event tracing is enabled. Jun 30 09:48:06.357707 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Jun 30 09:48:06.357742 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Jun 30 09:48:06.369707 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 09:48:06.381698 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 09:48:06.381732 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 09:48:06.393700 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 09:48:06.393734 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Jun 30 09:48:06.405709 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 09:48:06.417699 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 09:48:06.417737 [ 0.000012] Switching to timer-based delay loop, resolution 41ns Jun 30 09:48:06.429701 [ 0.000530] Console: colour dummy device 80x30 Jun 30 09:48:06.429734 [ 0.293437] printk: console [hvc0] enabled Jun 30 09:48:06.429759 [ 0.297629] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Jun 30 09:48:06.441702 [ 0.308029] CPU: Testing write buffer coherency: ok Jun 30 09:48:06.453639 [ 0.312972] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 09:48:06.465645 [ 0.322525] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 09:48:06.465678 [ 0.328939] pid_max: default: 32768 minimum: 301 Jun 30 09:48:06.465704 [ 0.333732] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 09:48:06.477641 [ 0.341006] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 09:48:06.489637 [ 0.349413] /cpus/cpu@0 missing clock-frequency property Jun 30 09:48:06.489667 [ 0.354209] /cpus/cpu@1 missing clock-frequency property Jun 30 09:48:06.501649 [ 0.359604] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 09:48:06.501679 [ 0.366118] xen:grant_table: Grant tables using version 1 layout Jun 30 09:48:06.513639 [ 0.371452] Grant table initialized Jun 30 09:48:06.513677 [ 0.374992] xen:events: Using FIFO-based ABI Jun 30 09:48:06.513705 [ 0.379310] Xen: initializing cpu0 Jun 30 09:48:06.525647 [ 0.382840] Setting up static identity map for 0x60300000 - 0x603000ac Jun 30 09:48:06.525679 [ 0.390594] rcu: Hierarchical SRCU implementation. Jun 30 09:48:06.537666 [ 0.394226] rcu: Max phase no-delay instances is 1000. Jun 30 09:48:06.537701 [ 0.402304] EFI services will not be available. Jun 30 09:48:06.537739 [ 0.405608] smp: Bringing up secondary CPUs ... Jun 30 09:48:06.549582 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 09:48:06.621641 [ 0.480196] Xen: initializing cpu1 Jun 30 09:48:06.621671 [ 0.480354] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 09:48:06.621699 [ 0.480382] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 09:48:06.633666 [ 0.499250] smp: Brought up 1 node, 2 CPUs Jun 30 09:48:06.645633 [ 0.503025] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 09:48:06.645665 [ 0.509337] CPU: All CPU(s) started in SVC mode. Jun 30 09:48:06.657600 [ 0.514740] devtmpfs: initialized Jun 30 09:48:06.657629 [ 0.527138] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 09:48:06.669651 [ 0.533627] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Jun 30 09:48:06.681658 [ 0.543351] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 09:48:06.693630 [ 0.551393] pinctrl core: initialized pinctrl subsystem Jun 30 09:48:06.693661 [ 0.557899] DMI not present or invalid. Jun 30 09:48:06.693685 [ 0.561005] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 09:48:06.705646 [ 0.568204] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 09:48:06.705646 [ 0.576962] thermal_sys: Registered thermal governor 'step_wise' Jun 30 09:48:06.717652 [ 0.577094] software IO TLB: area num 2. Jun 30 09:48:06.717686 [ 0.585775] software IO TLB: only able to allocate 8 MB Jun 30 09:48:06.729637 [ 0.592921] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Jun 30 09:48:06.741652 [ 0.598104] No ATAGs? Jun 30 09:48:06.741679 [ 0.600454] hw-breakpoint: Failed to enable monitor mode on CPU 0. Jun 30 09:48:06.741706 [ 0.608944] Serial: AMBA PL011 UART driver Jun 30 09:48:06.753573 [ 0.641125] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 62 Jun 30 09:48:06.789574 [ 0.690561] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 30 09:48:06.837589 [ 0.714779] xen:balloon: Initialising balloon driver Jun 30 09:48:06.861612 [ 0.722355] iommu: Default domain type: Translated Jun 30 09:48:06.861642 [ 0.725857] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 09:48:06.873703 [ 0.732803] SCSI subsystem initialized Jun 30 09:48:06.873735 [ 0.736360] usbcore: registered new interface driver usbfs Jun 30 09:48:06.873762 [ 0.741605] usbcore: registered new interface driver hub Jun 30 09:48:06.885701 [ 0.746995] usbcore: registered new device driver usb Jun 30 09:48:06.885733 [ 0.753617] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 09:48:06.897658 [ 0.757225] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 09:48:06.897692 [ 0.763538] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 09:48:06.909706 [ 0.771976] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 09:48:06.921706 [ 0.781109] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 09:48:06.921739 [ 0.786623] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 09:48:06.933697 [ 0.791317] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 09:48:06.933731 [ 0.797566] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 09:48:06.945716 [ 0.802794] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 09:48:06.945750 [ 0.807570] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 09:48:06.945777 [ 0.813690] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 09:48:06.957669 [ 0.818885] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 09:48:06.957702 [ 0.823779] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 09:48:06.969700 [ 0.829810] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 09:48:06.969733 [ 0.835585] pps_core: LinuxPPS API ver. 1 registered Jun 30 09:48:06.981660 [ 0.840022] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 09:48:06.981700 [ 0.849240] PTP clock support registered Jun 30 09:48:06.993695 [ 0.853404] EDAC MC: Ver: 3.0.0 Jun 30 09:48:06.993726 [ 0.858695] vgaarb: loaded Jun 30 09:48:06.993750 [ 0.864930] clocksource: Switched to clocksource arch_sys_counter Jun 30 09:48:07.005676 [ 0.887219] NET: Registered PF_INET protocol family Jun 30 09:48:07.029704 [ 0.890856] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Jun 30 09:48:07.041702 [ 0.898782] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 09:48:07.041740 [ 0.906459] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 09:48:07.053693 [ 0.914254] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Jun 30 09:48:07.065695 [ 0.922120] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Jun 30 09:48:07.065742 [ 0.929392] TCP: Hash tables configured (established 4096 bind 4096) Jun 30 09:48:07.077699 [ 0.935752] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 09:48:07.077734 [ 0.942300] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 09:48:07.089703 [ 0.949453] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 09:48:07.089738 [ 0.955904] RPC: Registered named UNIX socket transport module. Jun 30 09:48:07.101660 [ 0.961035] RPC: Registered udp transport module. Jun 30 09:48:07.101660 [ 0.965834] RPC: Registered tcp transport module. Jun 30 09:48:07.113702 [ 0.970581] RPC: Registered tcp NFSv4.1 backchannel transport module. Jun 30 09:48:07.113743 [ 0.977104] PCI: CLS 0 bytes, default 64 Jun 30 09:48:07.113768 [ 0.982405] Initialise system trusted keyrings Jun 30 09:48:07.125685 [ 0.986006] Trying to unpack rootfs image as initramfs... Jun 30 09:48:07.125719 [ 1.017467] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Jun 30 09:48:07.161677 [ 1.028652] squashfs: version 4.0 (2009/01/31) Phillip Lougher Jun 30 09:48:07.173637 [ 1.063716] NFS: Registering the id_resolver key type Jun 30 09:48:07.209681 [ 1.067515] Key type id_resolver registered Jun 30 09:48:07.209713 [ 1.071655] Key type id_legacy registered Jun 30 09:48:07.209738 [ 1.075883] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Jun 30 09:48:07.221710 [ 1.082518] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Jun 30 09:48:07.233619 [ 1.115537] Key type asymmetric registered Jun 30 09:48:07.257715 [ 1.118266] Asymmetric key parser 'x509' registered Jun 30 09:48:07.257748 [ 1.123335] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Jun 30 09:48:07.269637 [ 1.130717] io scheduler mq-deadline registered Jun 30 09:48:07.269637 [ 1.135293] io scheduler kyber registered Jun 30 09:48:07.281603 [ 1.169262] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Jun 30 09:48:07.317657 [ 1.247288] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 09:48:07.389746 [ 1.253492] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 09:48:07.401626 [ 1.287039] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 09:48:07.425689 [ 1.293256] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 09:48:07.437692 [ 1.327501] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 09:48:07.473708 [ 1.333705] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 09:48:07.485592 [ 1.355465] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 09:48:07.497710 [ 1.361671] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 09:48:07.509680 [ 1.375683] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 09:48:07.521643 [ 1.386202] xen:xen_evtchn: Event-channel device installed Jun 30 09:48:07.533578 [ 1.436776] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 09:48:07.581662 [ 1.446152] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 113, base_baud = 0) is a S3C6400/10 Jun 30 09:48:07.593665 [ 1.454229] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 114, base_baud = 0) is a S3C6400/10 Jun 30 09:48:07.605610 [ 1.463414] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 115, base_baud = 0) is a S3C6400/10 Jun 30 09:48:07.605610 [ 1.472594] SuperH (H)SCI(F) driver initialized Jun 30 09:48:07.617691 [ 1.477597] STMicroelectronics ASC driver initialized Jun 30 09:48:07.617729 [ 1.483040] STM32 USART driver initialized Jun 30 09:48:07.617755 [ 1.487751] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 09:48:07.629678 [ 1.503258] brd: module loaded Jun 30 09:48:07.641668 [ 1.509601] loop: module loaded Jun 30 09:48:07.653615 [ 1.525171] Invalid max_queues (4), will use default max: 2. Jun 30 09:48:07.665669 [ 1.552176] tun: Universal TUN/TAP device driver, 1.6 Jun 30 09:48:07.689646 [ 1.556104] CAN device driver interface Jun 30 09:48:07.701679 [ 1.561458] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Jun 30 09:48:07.701713 [ 1.572001] xen_netfront: Initialising Xen virtual ethernet driver Jun 30 09:48:07.713697 [ 1.576896] pegasus: Pegasus/Pegasus II USB Ethernet driver Jun 30 09:48:07.725669 [ 1.582471] usbcore: registered new interface driver pegasus Jun 30 09:48:07.725703 [ 1.588243] usbcore: registered new interface driver asix Jun 30 09:48:07.725730 [ 1.593694] usbcore: registered new interface driver ax88179_178a Jun 30 09:48:07.737665 [ 1.599858] usbcore: registered new interface driver cdc_ether Jun 30 09:48:07.737699 [ 1.605752] usbcore: registered new interface driver smsc75xx Jun 30 09:48:07.749668 [ 1.611579] usbcore: registered new interface driver smsc95xx Jun 30 09:48:07.749700 [ 1.617391] usbcore: registered new interface driver net1080 Jun 30 09:48:07.761711 [ 1.623099] usbcore: registered new interface driver cdc_subset Jun 30 09:48:07.761745 [ 1.629152] usbcore: registered new interface driver zaurus Jun 30 09:48:07.773698 [ 1.634774] usbcore: registered new interface driver cdc_ncm Jun 30 09:48:07.773732 [ 1.644071] usbcore: registered new interface driver usb-storage Jun 30 09:48:07.785665 [ 1.678996] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 09:48:07.821745 [ 1.687737] s5m-rtc s5m-rtc: setting system clock to 2024-06-30T09:48:08 UTC (1719740888) Jun 30 09:48:07.833747 [ 1.696639] i2c_dev: i2c /dev entries driver Jun 30 09:48:07.833779 [ 1.707780] syscon-poweroff 10040000.system-controller:syscon-poweroff: pm_power_off already claimed for psci_sys_poweroff Jun 30 09:48:07.857695 [ 1.717493] syscon-poweroff: probe of 10040000.system-controller:syscon-poweroff failed with error -16 Jun 30 09:48:07.869679 [ 1.728887] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Jun 30 09:48:07.869712 [ 1.740269] device-mapper: uevent: version 1.0.3 Jun 30 09:48:07.881712 [ 1.743759] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Jun 30 09:48:07.893728 [ 1.752758] cpu cpu0: OPP table can't be empty Jun 30 09:48:07.893767 [ 1.757780] failed to register cpuidle driver Jun 30 09:48:07.893794 [ 1.760958] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Jun 30 09:48:07.905883 [ 1.769433] sdhci: Secure Digital Host Controller Interface driver Jun 30 09:48:07.917675 [ 1.774324] sdhci: Copyright(c) Pierre Ossman Jun 30 09:48:07.917705 [ 1.782338] sdhci-pltfm: SDHCI platform and OF driver helper Jun 30 09:48:07.929663 [ 1.808585] Freeing initrd memory: 11772K Jun 30 09:48:07.953708 [ 1.811288] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 09:48:07.953739 [ 1.818358] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Jun 30 09:48:07.965691 [ 1.824700] usbcore: registered new interface driver usbhid Jun 30 09:48:07.965722 [ 1.829504] usbhid: USB HID core driver Jun 30 09:48:07.965747 [ 1.841013] NET: Registered PF_INET6 protocol family Jun 30 09:48:07.977680 [ 1.845526] Segment Routing with IPv6 Jun 30 09:48:07.989719 [ 1.848381] In-situ OAM (IOAM) with IPv6 Jun 30 09:48:07.989748 [ 1.852403] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Jun 30 09:48:08.001719 [ 1.858896] NET: Registered PF_PACKET protocol family Jun 30 09:48:08.001749 [ 1.863476] can: controller area network core Jun 30 09:48:08.001775 [ 1.867971] NET: Registered PF_CAN protocol family Jun 30 09:48:08.013712 [ 1.872732] can: raw protocol Jun 30 09:48:08.013740 [ 1.875805] can: broadcast manager protocol Jun 30 09:48:08.013776 [ 1.880048] can: netlink gateway - max_hops=1 Jun 30 09:48:08.025690 [ 1.884695] Key type dns_resolver registered Jun 30 09:48:08.025720 [ 1.889464] ThumbEE CPU extension supported. Jun 30 09:48:08.025746 [ 1.893136] Registering SWP/SWPB emulation handler Jun 30 09:48:08.037699 [ 1.898494] Loading compiled-in X.509 certificates Jun 30 09:48:08.037729 [ 1.926857] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 09:48:08.073620 [ 1.932912] clk: Not disabling unused clocks Jun 30 09:48:08.073650 [ 1.940052] Freeing unused kernel image (initmem) memory: 2048K Jun 30 09:48:08.085603 [ 1.946240] Run /init as init process Jun 30 09:48:08.085631 Loading, please wait... Jun 30 09:48:08.109574 Starting systemd-udevd version 252.26-1~deb12u2 Jun 30 09:48:08.181594 [ 3.440903] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 09:48:09.585669 [ 3.460332] phy phy-12130000.phy.6: phy_power_on was called before phy_init Jun 30 09:48:09.597678 [ 3.465977] exynos-ohci 12120000.usb: USB Host Controller Jun 30 09:48:09.609676 [ 3.471458] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Jun 30 09:48:09.609713 [ 3.499630] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 Jun 30 09:48:09.633655 [ 3.515382] phy phy-12130000.phy.6: phy_power_on was called before phy_init Jun 30 09:48:09.657687 [ 3.521038] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 09:48:09.657721 [ 3.527518] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 09:48:09.669698 [ 3.535138] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 09:48:09.681602 [ 3.578083] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 30 09:48:09.717643 [ 3.584574] Synopsys Designware Multimedia Card Interface Driver Jun 30 09:48:09.729615 [ 3.595057] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 30 09:48:09.729647 [ 3.595110] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 30 09:48:09.741640 [ 3.607708] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 30 09:48:09.753641 [ 3.608415] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 30 09:48:09.753674 [ 3.614045] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 30 09:48:09.765630 [ 3.621644] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 30 09:48:09.765662 [ 3.626972] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo Jun 30 09:48:09.777643 [ 3.644722] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 30 09:48:09.789653 [ 3.649353] hub 1-0:1.0: USB hub found Jun 30 09:48:09.789681 [ 3.650596] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 30 09:48:09.789707 [ 3.654421] hub 1-0:1.0: 3 ports detected Jun 30 09:48:09.801632 [ 3.659957] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 127,32 bit host data width,128 deep fifo Jun 30 09:48:09.813633 [ 3.673558] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Jun 30 09:48:09.813667 [ 3.677105] mmc_host mmc0: card is polling. Jun 30 09:48:09.825589 [ 3.694455] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 09:48:09.837601 [ 3.702480] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 Jun 30 09:48:09.837632 [ 3.727261] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Jun 30 09:48:09.861606 [ 3.730971] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 30 09:48:09.873657 [ 3.739402] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Jun 30 09:48:09.885631 [ 3.747854] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 30 09:48:09.885666 [ 3.756880] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 09:48:09.897648 [ 3.756961] s3c-rtc 101e0000.rtc: registered as rtc1 Jun 30 09:48:09.897708 [ 3.770439] hub 2-0:1.0: USB hub found Jun 30 09:48:09.909637 [ 3.774223] scsi host0: ahci-dwc Jun 30 09:48:09.909666 [ 3.775930] hub 2-0:1.0: 3 ports detected Jun 30 09:48:09.909691 [ 3.776556] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 129 Jun 30 09:48:09.921645 [ 3.781734] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 09:48:09.933668 [ 3.797896] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 09:48:09.945579 [ 3.882618] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 09:48:10.029620 [ 3.897097] mmc1: new high speed SDHC card at address aaaa Jun 30 09:48:10.052765 [ 3.904312] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Jun 30 09:48:10.052798 [ 3.908939] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 30 09:48:10.053607 [ 3.925227] mmc0: new DDR MMC card at address 0001 Jun 30 09:48:10.065621 [ 3.931835] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Jun 30 09:48:10.065650 [ 3.937422] mmcblk0: p1 p2 p3 p4 Jun 30 09:48:10.077633 [ 3.940692] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Jun 30 09:48:10.077662 [ 3.945972] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Jun 30 09:48:10.089638 [ 3.950975] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Jun 30 09:48:10.089680 [ 4.284960] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 30 09:48:10.425646 [ 4.290718] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 30 09:48:10.425687 [ 4.296588] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 30 09:48:10.437638 [ 4.304253] ata1.00: configured for UDMA/133 Jun 30 09:48:10.437667 [ 4.307866] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 30 09:48:10.449641 [ 4.316956] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 30 09:48:10.461633 [ 4.323194] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 30 09:48:10.461662 [ 4.328605] sd 0:0:0:0: [sda] Write Protect is off Jun 30 09:48:10.473648 [ 4.333420] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 30 09:48:10.473682 [ 4.342576] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 30 09:48:10.485612 [ 4.368324] sda: sda1 sda2 < sda5 > Jun 30 09:48:10.509622 [ 4.371302] sd 0:0:0:0: [sda] Attached SCSI disk Jun 30 09:48:10.509651 [ 4.380308] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Jun 30 09:48:10.521631 [ 4.828173] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Jun 30 09:48:10.965682 [ 4.835180] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 09:48:10.977674 [ 4.839534] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 09:48:10.977711 [ 4.854107] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Jun 30 09:48:11.001627 [ 4.872013] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Jun 30 09:48:11.013682 [ 4.876881] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 09:48:11.013716 [ 4.882224] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 09:48:11.025677 [ 4.889965] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 09:48:11.025712 [ 4.897803] hub 3-0:1.0: USB hub found Jun 30 09:48:11.037684 [ 4.900384] hub 3-0:1.0: 1 port detected Jun 30 09:48:11.037716 [ 4.905032] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 09:48:11.049682 [ 4.913113] hub 4-0:1.0: USB hub found Jun 30 09:48:11.049713 [ 4.916535] hub 4-0:1.0: 1 port detected Jun 30 09:48:11.049738 [ 5.135010] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 09:48:11.277665 [ 5.207360] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 09:48:11.349653 [ 5.341084] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 09:48:11.481672 [ 5.449270] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 09:48:11.589627 [ 5.557425] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 09:48:11.697638 [ 5.665591] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 09:48:11.805644 [ 5.995253] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 09:48:12.141633 [ 6.069054] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 09:48:12.213655 [ 6.183366] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 09:48:12.321692 [ 6.291081] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 09:48:12.429684 [ 6.398809] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 09:48:12.537680 [ 6.506528] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 09:48:12.645694 [ 6.514109] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 09:48:12.657643 [ 7.244922] random: crng init done Jun 30 09:48:13.380565 Begin: Loading essential drivers ... done. Jun 30 09:48:14.052520 Begin: Running /scripts/init-premount ... done. Jun 30 09:48:17.068525 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 30 09:48:17.080470 Begin: Running /scripts/local-premount ... done. Jun 30 09:48:17.080470 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 30 09:48:17.176436 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 30 09:48:17.272440 /dev/mapper/arndale--metrocentre--vg-root: clean, 46626/1220608 files, 623830/4882432 blocks Jun 30 09:48:17.524550 done. Jun 30 09:48:17.536481 [ 11.407375] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 30 09:48:17.548512 [ 11.798678] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: disabled. Jun 30 09:48:17.944501 done. Jun 30 09:48:17.944501 Begin: Running /scripts/local-bottom ... done. Jun 30 09:48:17.992532 Begin: Running /scripts/init-bottom ... done. Jun 30 09:48:18.028433 INIT: version 3.06 booting Jun 30 09:48:18.520655 INIT: No inittab.d directory found Jun 30 09:48:18.608501 Using makefile-style concurrent boot in runlevel S. Jun 30 09:48:18.968639 Starting hotplug events dispatcher: systemd-udevd. Jun 30 09:48:20.576449 Synthesizing the initial hotplug events (subsystems)...done. Jun 30 09:48:21.140553 Synthesizing the initial hotplug events (devices)...[ 15.373507] wm8994 3-001a: Device is not a WM8994, ID is 0 Jun 30 09:48:21.512521 [ 15.380072] wm8994: probe of 3-001a failed with error -22 Jun 30 09:48:21.524450 done. Jun 30 09:48:22.016509 Waiting for /dev to be fully populated...[ 15.923507] mc: Linux media interface: v0.10 Jun 30 09:48:22.064560 [ 15.926869] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 30 09:48:22.076577 [ 15.960001] s5p-secss 10830000.sss: s5p-sss driver registered Jun 30 09:48:22.100523 [ 15.975909] videodev: Linux video capture interface: v2.00 Jun 30 09:48:22.112519 [ 16.092946] s5p-mfc 11000000.codec: Adding to iommu group 0 Jun 30 09:48:22.232583 [ 16.184267] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Jun 30 09:48:22.328594 [ 16.220197] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 09:48:22.364494 [ 16.252881] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 09:48:22.400592 [ 16.260284] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 09:48:22.412521 [ 16.285519] s5p-mfc 11000000.codec: decoder registered as /dev/video0 Jun 30 09:48:22.424600 [ 16.307027] s5p-mfc 11000000.codec: encoder registered as /dev/video1 Jun 30 09:48:22.448540 [ 16.436982] exynos-gsc 13e00000.gsc: Adding to iommu group 1 Jun 30 09:48:22.580571 [ 16.465159] exynos-gsc 13e10000.gsc: Adding to iommu group 2 Jun 30 09:48:22.604584 [ 16.470270] exynos-gsc 13e20000.gsc: Adding to iommu group 3 Jun 30 09:48:22.616546 [ 16.479006] exynos-gsc 13e30000.gsc: Adding to iommu group 4 Jun 30 09:48:22.616546 [ 16.532948] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 09:48:22.676550 [ 16.564962] usb3503 usb-hub: switched to HUB mode Jun 30 09:48:22.700566 [ 16.568329] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 09:48:22.712568 [ 16.608564] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 09:48:22.760460 [ 16.745218] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 09:48:22.892789 [ 16.854828] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 09:48:23.000625 [ 16.914958] usb 2-3: new high-speed USB device number 2 using exynos-ehci Jun 30 09:48:23.060584 [ 16.963401] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 09:48:23.105732 [ 16.985924] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Jun 30 09:48:23.129733 [ 17.071644] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 09:48:23.216505 [ 17.116146] hub 2-3:1.0: USB hub found Jun 30 09:48:23.252498 [ 17.118735] hub 2-3:1.0: 3 ports detected Jun 30 09:48:23.264491 [ 17.238356] I/O error, dev mmcblk1, sector 7743712 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 2 Jun 30 09:48:23.384608 [ 17.340789] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 09:48:23.480600 [ 17.348545] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 09:48:23.492663 [ 17.357206] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 09:48:23.504646 [ 17.371075] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 09:48:23.516648 [ 17.378785] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 09:48:23.528563 [ 17.387448] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 09:48:23.540552 [ 17.464980] usb 2-3.2: new high-speed USB device number 3 using exynos-ehci Jun 30 09:48:23.612554 [ 17.531141] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 09:48:23.672633 [ 17.603905] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 09:48:23.744552 [ 17.617875] hub 2-3.2:1.0: USB hub found Jun 30 09:48:23.756550 [ 17.620932] hub 2-3.2:1.0: 4 ports detected Jun 30 09:48:23.756550 [ 17.720638] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 09:48:23.861821 [ 17.750906] usbcore: registered new device driver onboard-usb-hub Jun 30 09:48:23.897684 [ 17.828507] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 09:48:23.969773 [ 17.875776] hub 2-3.2:1.0: USB hub found Jun 30 09:48:24.017728 [ 17.878797] hub 2-3.2:1.0: 4 ports detected Jun 30 09:48:24.017787 [ 17.889694] hub 2-3.2:1.0: USB hub found Jun 30 09:48:24.029758 [ 17.892644] hub 2-3.2:1.0: 4 ports detected Jun 30 09:48:24.029819 [ 17.954665] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 09:48:24.101666 [ 18.062418] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 09:48:24.212631 [ 18.070026] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 09:48:24.212704 done. Jun 30 09:48:24.236576 [ 18.124986] usb 2-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 30 09:48:24.272585 [ 18.298254] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 30 09:48:24.444670 [ 18.479693] EXT4-fs (dm-0): re-mounted. Quota mode: disabled. Jun 30 09:48:24.624653 [ 18.986634] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 09:48:25.137715 [ 19.000852] Asix Electronics AX88772A usb-002:004:10: attached PHY driver (mii_bus:phy_addr=usb-002:004:10, irq=POLL) Jun 30 09:48:25.149626 [ 19.010760] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 5e:f4:cb:1f:d7:18 Jun 30 09:48:25.161741 Checking file systems.../dev/sda1: clean, 2105/61056 files, 43311/243968 blocks Jun 30 09:48:25.821676 done. Jun 30 09:48:26.049672 Cleaning up temporary files... /tmp. Jun 30 09:48:26.805671 [ 20.892059] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 30 09:48:27.033584 [ 20.944095] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: disabled. Jun 30 09:48:27.093583 [ 21.044322] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k Jun 30 09:48:27.189675 Mounting local filesystems...done. Jun 30 09:48:27.441639 Activating swapfile swap, if any...done. Jun 30 09:48:27.441676 Cleaning up temporary files.... Jun 30 09:48:27.477623 Starting Setting kernel variables: sysctl. Jun 30 09:48:27.621599 [ 22.910975] xenbr0: port 1(eth0) entered blocking state Jun 30 09:48:29.049713 [ 22.914833] xenbr0: port 1(eth0) entered disabled state Jun 30 09:48:29.061673 [ 22.920295] device eth0 entered promiscuous mode Jun 30 09:48:29.061706 [ 22.930414] asix 2-3.2.4:1.0 eth0: configuring for phy/internal link mode Jun 30 09:48:29.073703 Configuring network interfaces...RTNETLINK answers: Operation not supported Jun 30 09:48:30.889699 Jun 30 09:48:30.901636 Waiting for xenbr0 to get ready (MAXWAIT is 2 seconds). Jun 30 09:48:30.901671 [ 25.133295] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 30 09:48:31.273780 [ 25.139285] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jun 30 09:48:31.285669 [ 25.145653] xenbr0: port 1(eth0) entered blocking state Jun 30 09:48:31.285701 [ 25.150869] xenbr0: port 1(eth0) entered forwarding state Jun 30 09:48:31.297637 [ 25.157121] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready Jun 30 09:48:31.297669 done. Jun 30 09:48:31.465669 Starting nftables: nonemnl.c:60: Unable to initialize Netlink socket: Protocol not supported Jun 30 09:48:31.693718 failed! Jun 30 09:48:31.693757 Cleaning up temporary files.... Jun 30 09:48:31.741606 Setting up X socket directories... Jun 30 09:48:31.801658 /tmp/.X11-unix Jun 30 09:48:31.801688 /tmp/.ICE-unix Jun 30 09:48:31.801710 . Jun 30 09:48:31.813634 startpar: service(s) returned failure: nftables ... failed! Jun 30 09:48:31.813668 INIT: Entering runlevel: 2 Jun 30 09:48:31.837621 Using makefile-style concurrent boot in runlevel 2. Jun 30 09:48:31.849631 Starting Apache httpd web server: apache2AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.149.64.44. Set the 'ServerName' directive globally to suppress this message Jun 30 09:48:32.629751 . Jun 30 09:48:33.700476 Starting SMP IRQ Balancer: irqbalance. Jun 30 09:48:34.276436 Starting NTP server: ntpd2024-06-30T09:48:34 ntpd[1150]: INIT: ntpd ntpsec-1.2.2: Starting Jun 30 09:48:34.360695 2024-06-30T09:48:34 ntpd[1150]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 30 09:48:34.372503 . Jun 30 09:48:34.372503 Starting system message bus: dbus. Jun 30 09:48:34.528496 Starting OpenBSD Secure Shell server: sshd. Jun 30 09:48:35.524537 Starting /usr/local/sbin/xenstored... Jun 30 09:48:38.144538 Setting domain 0 name, domid and JSON config... Jun 30 09:48:38.156586 Done setting up Dom0 Jun 30 09:48:38.156586 Starting xenconsoled... Jun 30 09:48:38.156586 Starting QEMU as disk backend for dom0 Jun 30 09:48:38.156586 Starting libvirt management daemon: libvirtd2024-06-30 09:48:39.287+0000: 1256: info : libvirt version: 10.5.0 Jun 30 09:48:38.844583 2024-06-30 09:48:39.287+0000: 1256: info : hostname: arndale-metrocentre Jun 30 09:48:38.856582 2024-06-30 09:48:39.287+0000: 1256: debug : virLogParseOutputs:1638 : outputs=1:file:/var/log/libvirt/libvirtd.log Jun 30 09:48:38.868586 2024-06-30 09:48:39.291+0000: 1256: debug : virLogParseOutput:1485 : output=1:file:/var/log/libvirt/libvirtd.log Jun 30 09:48:38.868586 . Jun 30 09:48:38.868586 Jun 30 09:48:40.000533 Debian GNU/Linux 12 arndale-metrocentre hvc0 Jun 30 09:48:40.000533 Jun 30 09:48:40.000533 arndale-metrocentre login: [ 114.629282] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Quota mode: disabled. Jun 30 09:50:00.769597 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 09:50:19.045665 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 09:57:00.556521 [ 635.438733] EXT4-fs (dm-3): unmounting filesystem. Jun 30 09:58:41.573739 [ 642.688642] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Quota mode: disabled. Jun 30 09:58:48.821802 [ 647.838875] EXT4-fs (dm-3): unmounting filesystem. Jun 30 09:58:53.969621 [ 666.297273] xenbr0: port 2(vif1.0) entered blocking state Jun 30 09:59:12.433796 [ 666.301306] xenbr0: port 2(vif1.0) entered disabled state Jun 30 09:59:12.433874 [ 666.306999] device vif1.0 entered promiscuous mode Jun 30 09:59:12.445676 (XEN) d1v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 09:59:13.537734 (XEN) d1v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 09:59:13.549608 (XEN) gnttab_mark_dirty not implemented yet Jun 30 09:59:14.605637 (XEN) common/grant_table.c:1909:d1v0 Expanding d1 grant table from 1 to 2 frames Jun 30 09:59:14.665615 [ 668.843923] vif vif-1-0 vif1.0: Guest Rx ready Jun 30 09:59:14.977644 [ 668.862748] IPv6: ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready Jun 30 09:59:15.001687 [ 668.868162] xenbr0: port 2(vif1.0) entered blocking state Jun 30 09:59:15.001721 [ 668.873298] xenbr0: port 2(vif1.0) entered forwarding state Jun 30 09:59:15.013620 [ 711.269031] xenbr0: port 2(vif1.0) entered disabled state Jun 30 09:59:57.409697 [ 711.455598] xenbr0: port 2(vif1.0) entered disabled state Jun 30 09:59:57.589675 [ 711.460417] device vif1.0 left promiscuous mode Jun 30 09:59:57.589710 [ 711.464279] xenbr0: port 2(vif1.0) entered disabled state Jun 30 09:59:57.601631 [ 766.517518] xenbr0: port 2(vif2.0) entered blocking state Jun 30 10:00:52.653667 [ 766.521549] xenbr0: port 2(vif2.0) entered disabled state Jun 30 10:00:52.653954 [ 766.527208] device vif2.0 entered promiscuous mode Jun 30 10:00:52.665618 (XEN) d2v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 10:00:53.757624 (XEN) d2v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 10:00:53.769620 (XEN) common/grant_table.c:1909:d2v0 Expanding d2 grant table from 1 to 2 frames Jun 30 10:00:54.649788 [ 768.701993] vif vif-2-0 vif2.0: Guest Rx ready Jun 30 10:00:54.829651 [ 768.705691] IPv6: ADDRCONF(NETDEV_CHANGE): vif2.0: link becomes ready Jun 30 10:00:54.841753 [ 768.711747] xenbr0: port 2(vif2.0) entered blocking state Jun 30 10:00:54.841815 [ 768.717210] xenbr0: port 2(vif2.0) entered forwarding state Jun 30 10:00:54.853756 [ 809.261504] xenbr0: port 2(vif2.0) entered disabled state Jun 30 10:01:35.400430 [ 809.445403] xenbr0: port 2(vif2.0) entered disabled state Jun 30 10:01:35.580500 [ 809.450420] device vif2.0 left promiscuous mode Jun 30 10:01:35.580500 [ 809.454080] xenbr0: port 2(vif2.0) entered disabled state Jun 30 10:01:35.592453 [ 863.840114] xenbr0: port 2(vif3.0) entered blocking state Jun 30 10:02:29.976617 [ 863.844148] xenbr0: port 2(vif3.0) entered disabled state Jun 30 10:02:29.977254 [ 863.849817] device vif3.0 entered promiscuous mode Jun 30 10:02:29.988380 (XEN) d3v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 10:02:31.064506 (XEN) d3v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 10:02:31.076345 (XEN) common/grant_table.c:1909:d3v0 Expanding d3 grant table from 1 to 2 frames Jun 30 10:02:32.112494 [ 866.141845] vif vif-3-0 vif3.0: Guest Rx ready Jun 30 10:02:32.268568 [ 866.145032] IPv6: ADDRCONF(NETDEV_CHANGE): vif3.0: link becomes ready Jun 30 10:02:32.280553 [ 866.151633] xenbr0: port 2(vif3.0) entered blocking state Jun 30 10:02:32.280553 [ 866.156951] xenbr0: port 2(vif3.0) entered forwarding state Jun 30 10:02:32.292584 [ 906.644426] xenbr0: port 2(vif3.0) entered disabled state Jun 30 10:03:12.781741 [ 906.845539] xenbr0: port 2(vif3.0) entered disabled state Jun 30 10:03:12.973741 [ 906.850167] device vif3.0 left promiscuous mode Jun 30 10:03:12.985745 [ 906.854206] xenbr0: port 2(vif3.0) entered disabled state Jun 30 10:03:12.985808 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 10:03:41.724719 [ 962.086829] xenbr0: port 2(vif4.0) entered blocking state Jun 30 10:04:08.217845 [ 962.090862] xenbr0: port 2(vif4.0) entered disabled state Jun 30 10:04:08.217917 [ 962.096553] device vif4.0 entered promiscuous mode Jun 30 10:04:08.229766 (XEN) d4v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 10:04:09.309821 (XEN) d4v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 10:04:09.321797 (XEN) common/grant_table.c:1909:d4v0 Expanding d4 grant table from 1 to 2 frames Jun 30 10:04:10.077797 [ 964.146391] vif vif-4-0 vif4.0: Guest Rx ready Jun 30 10:04:10.269647 [ 964.149510] IPv6: ADDRCONF(NETDEV_CHANGE): vif4.0: link becomes ready Jun 30 10:04:10.281846 [ 964.156164] xenbr0: port 2(vif4.0) entered blocking state Jun 30 10:04:10.293634 [ 964.162263] xenbr0: port 2(vif4.0) entered forwarding state Jun 30 10:04:10.293698 [ 1005.282730] xenbr0: port 2(vif4.0) entered disabled state Jun 30 10:04:51.417660 [ 1005.455381] xenbr0: port 2(vif4.0) entered disabled state Jun 30 10:04:51.585687 [ 1005.460186] device vif4.0 left promiscuous mode Jun 30 10:04:51.597663 [ 1005.464042] xenbr0: port 2(vif4.0) entered disabled state Jun 30 10:04:51.597698 [ 1065.191302] xenbr0: port 2(vif5.0) entered blocking state Jun 30 10:05:51.321974 [ 1065.195403] xenbr0: port 2(vif5.0) entered disabled state Jun 30 10:05:51.333930 [ 1065.200986] device vif5.0 entered promiscuous mode Jun 30 10:05:51.333992 (XEN) d5v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 10:05:52.425959 (XEN) d5v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 10:05:52.437925 (XEN) common/grant_table.c:1909:d5v0 Expanding d5 grant table from 1 to 2 frames Jun 30 10:05:53.493969 [ 1067.583150] vif vif-5-0 vif5.0: Guest Rx ready Jun 30 10:05:53.709880 [ 1067.586306] IPv6: ADDRCONF(NETDEV_CHANGE): vif5.0: link becomes ready Jun 30 10:05:53.721835 [ 1067.592895] xenbr0: port 2(vif5.0) entered blocking state Jun 30 10:05:53.721869 [ 1067.599394] xenbr0: port 2(vif5.0) entered forwarding state Jun 30 10:05:53.733928 [ 1108.387939] xenbr0: port 2(vif5.0) entered disabled state Jun 30 10:06:34.513633 [ 1108.585588] xenbr0: port 2(vif5.0) entered disabled state Jun 30 10:06:34.717686 [ 1108.590186] device vif5.0 left promiscuous mode Jun 30 10:06:34.717686 [ 1108.594312] xenbr0: port 2(vif5.0) entered disabled state Jun 30 10:06:34.729613 [ 1162.892649] xenbr0: port 2(vif6.0) entered blocking state Jun 30 10:07:29.028787 [ 1162.896725] xenbr0: port 2(vif6.0) entered disabled state Jun 30 10:07:29.028873 [ 1162.902344] device vif6.0 entered promiscuous mode Jun 30 10:07:29.028921 (XEN) d6v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 10:07:30.120521 (XEN) d6v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 10:07:30.144499 (XEN) common/grant_table.c:1909:d6v0 Expanding d6 grant table from 1 to 2 frames Jun 30 10:07:31.101737 [ 1165.236281] vif vif-6-0 vif6.0: Guest Rx ready Jun 30 10:07:31.368741 [ 1165.239536] IPv6: ADDRCONF(NETDEV_CHANGE): vif6.0: link becomes ready Jun 30 10:07:31.368811 [ 1165.246042] xenbr0: port 2(vif6.0) entered blocking state Jun 30 10:07:31.380593 [ 1165.252252] xenbr0: port 2(vif6.0) entered forwarding state Jun 30 10:07:31.380593 [ 1205.670451] xenbr0: port 2(vif6.0) entered disabled state Jun 30 10:08:11.801646 [ 1205.845533] xenbr0: port 2(vif6.0) entered disabled state Jun 30 10:08:11.981664 [ 1205.850050] device vif6.0 left promiscuous mode Jun 30 10:08:11.981664 [ 1205.854202] xenbr0: port 2(vif6.0) entered disabled state Jun 30 10:08:11.981664 [ 1261.442313] xenbr0: port 2(vif7.0) entered blocking state Jun 30 10:09:07.573636 [ 1261.446419] xenbr0: port 2(vif7.0) entered disabled state Jun 30 10:09:07.573636 [ 1261.451994] device vif7.0 entered promiscuous mode Jun 30 10:09:07.585577 (XEN) d7v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 10:09:08.680512 (XEN) d7v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 10:09:08.689705 (XEN) common/grant_table.c:1909:d7v0 Expanding d7 grant table from 1 to 2 frames Jun 30 10:09:09.985581 [ 1264.104820] vif vif-7-0 vif7.0: Guest Rx ready Jun 30 10:09:10.237591 [ 1264.107972] IPv6: ADDRCONF(NETDEV_CHANGE): vif7.0: link becomes ready Jun 30 10:09:10.237591 [ 1264.114567] xenbr0: port 2(vif7.0) entered blocking state Jun 30 10:09:10.249568 [ 1264.125057] xenbr0: port 2(vif7.0) entered forwarding state Jun 30 10:09:10.249568 [ 1304.965080] xenbr0: port 2(vif7.0) entered disabled state Jun 30 10:09:51.085766 [ 1305.145594] xenbr0: port 2(vif7.0) entered disabled state Jun 30 10:09:51.277802 [ 1305.150161] device vif7.0 left promiscuous mode Jun 30 10:09:51.277864 [ 1305.154261] xenbr0: port 2(vif7.0) entered disabled state Jun 30 10:09:51.277914 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 10:10:23.093722 [ 1360.468986] xenbr0: port 2(vif8.0) entered blocking state Jun 30 10:10:46.593739 [ 1360.473020] xenbr0: port 2(vif8.0) entered disabled state Jun 30 10:10:46.605723 [ 1360.478735] device vif8.0 entered promiscuous mode Jun 30 10:10:46.605784 (XEN) d8v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 10:10:47.709764 (XEN) d8v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 10:10:47.721627 (XEN) common/grant_table.c:1909:d8v0 Expanding d8 grant table from 1 to 2 frames Jun 30 10:10:48.789745 [ 1362.819550] vif vif-8-0 vif8.0: Guest Rx ready Jun 30 10:10:48.945801 [ 1362.824416] IPv6: ADDRCONF(NETDEV_CHANGE): vif8.0: link becomes ready Jun 30 10:10:48.957767 [ 1362.829643] xenbr0: port 2(vif8.0) entered blocking state Jun 30 10:10:48.957835 [ 1362.835016] xenbr0: port 2(vif8.0) entered forwarding state Jun 30 10:10:48.969647 [ 1403.514790] xenbr0: port 2(vif8.0) entered disabled state Jun 30 10:11:29.641736 [ 1403.666867] xenbr0: port 2(vif8.0) entered disabled state Jun 30 10:11:29.797771 [ 1403.671462] device vif8.0 left promiscuous mode Jun 30 10:11:29.797831 [ 1403.675550] xenbr0: port 2(vif8.0) entered disabled state Jun 30 10:11:29.809631 [ 1457.933213] xenbr0: port 2(vif9.0) entered blocking state Jun 30 10:12:24.061797 [ 1457.937338] xenbr0: port 2(vif9.0) entered disabled state Jun 30 10:12:24.061874 [ 1457.942885] device vif9.0 entered promiscuous mode Jun 30 10:12:24.073707 (XEN) d9v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 10:12:25.165715 (XEN) d9v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 10:12:25.177703 (XEN) common/grant_table.c:1909:d9v0 Expanding d9 grant table from 1 to 2 frames Jun 30 10:12:25.813802 [ 1459.854756] vif vif-9-0 vif9.0: Guest Rx ready Jun 30 10:12:25.981762 [ 1459.858023] IPv6: ADDRCONF(NETDEV_CHANGE): vif9.0: link becomes ready Jun 30 10:12:25.981826 [ 1459.864493] xenbr0: port 2(vif9.0) entered blocking state Jun 30 10:12:25.993739 [ 1459.870245] xenbr0: port 2(vif9.0) entered forwarding state Jun 30 10:12:25.993800 [ 1500.930152] xenbr0: port 2(vif9.0) entered disabled state Jun 30 10:13:07.049782 [ 1501.085633] xenbr0: port 2(vif9.0) entered disabled state Jun 30 10:13:07.205758 [ 1501.090295] device vif9.0 left promiscuous mode Jun 30 10:13:07.217745 [ 1501.094296] xenbr0: port 2(vif9.0) entered disabled state Jun 30 10:13:07.217808 [ 1556.438803] xenbr0: port 2(vif10.0) entered blocking state Jun 30 10:14:02.565656 [ 1556.442925] xenbr0: port 2(vif10.0) entered disabled state Jun 30 10:14:02.565656 [ 1556.448699] device vif10.0 entered promiscuous mode Jun 30 10:14:02.577610 (XEN) d10v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 10:14:03.669752 (XEN) d10v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 10:14:03.681674 (XEN) common/grant_table.c:1909:d10v0 Expanding d10 grant table from 1 to 2 frames Jun 30 10:14:04.737711 [ 1558.788700] vif vif-10-0 vif10.0: Guest Rx ready Jun 30 10:14:04.917757 [ 1558.791978] IPv6: ADDRCONF(NETDEV_CHANGE): vif10.0: link becomes ready Jun 30 10:14:04.917823 [ 1558.798755] xenbr0: port 2(vif10.0) entered blocking state Jun 30 10:14:04.929691 [ 1558.806406] xenbr0: port 2(vif10.0) entered forwarding state Jun 30 10:14:04.929725 [ 1599.224099] xenbr0: port 2(vif10.0) entered disabled state Jun 30 10:14:45.345744 [ 1599.415762] xenbr0: port 2(vif10.0) entered disabled state Jun 30 10:14:45.537731 [ 1599.420491] device vif10.0 left promiscuous mode Jun 30 10:14:45.549758 [ 1599.424600] xenbr0: port 2(vif10.0) entered disabled state Jun 30 10:14:45.549820 [ 1653.842029] xenbr0: port 2(vif11.0) entered blocking state Jun 30 10:15:39.973582 [ 1653.846198] xenbr0: port 2(vif11.0) entered disabled state Jun 30 10:15:39.973630 [ 1653.851868] device vif11.0 entered promiscuous mode Jun 30 10:15:39.973630 (XEN) d11v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 10:15:41.077698 (XEN) d11v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 10:15:41.089715 (XEN) common/grant_table.c:1909:d11v0 Expanding d11 grant table from 1 to 2 frames Jun 30 10:15:42.209721 [ 1656.186067] vif vif-11-0 vif11.0: Guest Rx ready Jun 30 10:15:42.305738 [ 1656.189344] IPv6: ADDRCONF(NETDEV_CHANGE): vif11.0: link becomes ready Jun 30 10:15:42.317743 [ 1656.196130] xenbr0: port 2(vif11.0) entered blocking state Jun 30 10:15:42.317778 [ 1656.205071] xenbr0: port 2(vif11.0) entered forwarding state Jun 30 10:15:42.329709 [ 1696.540433] xenbr0: port 2(vif11.0) entered disabled state Jun 30 10:16:22.657789 [ 1696.735543] xenbr0: port 2(vif11.0) entered disabled state Jun 30 10:16:22.861770 [ 1696.740012] device vif11.0 left promiscuous mode Jun 30 10:16:22.861836 [ 1696.744358] xenbr0: port 2(vif11.0) entered disabled state Jun 30 10:16:22.873690 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 10:17:03.697676 [ 1751.840896] xenbr0: port 2(vif12.0) entered blocking state Jun 30 10:17:17.969826 [ 1751.845076] xenbr0: port 2(vif12.0) entered disabled state Jun 30 10:17:17.969914 [ 1751.850735] device vif12.0 entered promiscuous mode Jun 30 10:17:17.981646 (XEN) d12v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 10:17:19.073704 (XEN) d12v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 10:17:19.085752 (XEN) common/grant_table.c:1909:d12v0 Expanding d12 grant table from 1 to 2 frames Jun 30 10:17:20.105712 [ 1754.219745] vif vif-12-0 vif12.0: Guest Rx ready Jun 30 10:17:20.345808 [ 1754.223032] IPv6: ADDRCONF(NETDEV_CHANGE): vif12.0: link becomes ready Jun 30 10:17:20.345808 [ 1754.229762] xenbr0: port 2(vif12.0) entered blocking state Jun 30 10:17:20.357576 [ 1754.235633] xenbr0: port 2(vif12.0) entered forwarding state Jun 30 10:17:20.357673 [ 1792.300076] xenbr0: port 2(vif12.0) entered disabled state Jun 30 10:17:58.420381 [ 1792.395457] xenbr0: port 2(vif12.0) entered disabled state Jun 30 10:17:58.520423 [ 1792.400531] device vif12.0 left promiscuous mode Jun 30 10:17:58.520423 [ 1792.404289] xenbr0: port 2(vif12.0) entered disabled state Jun 30 10:17:58.532447 Jun 30 10:18:20.306375 (XEN) *** Serial input to Xen (type 'CTRL-x' three times to switch input) Jun 30 10:18:20.328752 Jun 30 10:18:20.329832 Jun 30 10:18:21.269851 (XEN) '0' pressed -> dumping Dom0's registers Jun 30 10:18:21.292707 (XEN) *** Dumping Dom0 vcpu#0 state: *** Jun 30 10:18:21.292761 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Jun 30 10:18:21.295183 Not tainted ]---- Jun 30 10:18:21.304498 (XEN) CPU: 0 Jun 30 10:18:21.304498 (XEN) PC: c031ce28 Jun 30 10:18:21.304498 (XEN) CPSR: 60030093 MODE:32-bit Guest SVC Jun 30 10:18:21.304498 (XEN) R0: 00000005 R1: 00000000 R2: 005ca8b1 R3: c031ce20 Jun 30 10:18:21.316699 (XEN) R4: c1909d80 R5: c1b12280 R6: c1904d1c R7: c1904d78 Jun 30 10:18:21.316699 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c80 Jun 30 10:18:21.328750 (XEN) USR: SP: beda6948 LR: b6bd6853 Jun 30 10:18:21.328863 (XEN) SVC: SP: c1901f40 LR: c0308df0 SPSR:60030013 Jun 30 10:18:21.328890 (XEN) ABT: SP: c1b22b10 LR: c0300ea0 SPSR:600f0193 Jun 30 10:18:21.340756 (XEN) UND: SP: c1b22b20 LR: c0300fa0 SPSR:60030093 Jun 30 10:18:21.340863 (XEN) IRQ: SP: c1b22b00 LR: c0300ba0 SPSR:60030193 Jun 30 10:18:21.352751 (XEN) FIQ: SP: c1b22b30 LR: c1b22b30 SPSR:00000000 Jun 30 10:18:21.352860 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Jun 30 10:18:21.352887 (XEN) Jun 30 10:18:21.364720 (XEN) SCTLR: 10c5387d Jun 30 10:18:21.364744 (XEN) TCR: 00000000 Jun 30 10:18:21.364744 (XEN) TTBR0: 000000006418006a Jun 30 10:18:21.364744 (XEN) TTBR1: 000000006020406a Jun 30 10:18:21.364744 (XEN) IFAR: b6eec438, IFSR: 00000007 Jun 30 10:18:21.376612 (XEN) DFAR: 0059c318, DFSR: 0000081f Jun 30 10:18:21.376612 (XEN) Jun 30 10:18:21.376612 (XEN) VTCR_EL2: 80003558 Jun 30 10:18:21.376612 (XEN) VTTBR_EL2: 00010000bef8a000 Jun 30 10:18:21.388607 (XEN) Jun 30 10:18:21.388607 (XEN) SCTLR_EL2: 30cd187f Jun 30 10:18:21.388607 (XEN) HCR_EL2: 007c663f Jun 30 10:18:21.388607 (XEN) TTBR0_EL2: 0000000041115000 Jun 30 10:18:21.388607 (XEN) Jun 30 10:18:21.388607 (XEN) ESR_EL2: 07e00000 Jun 30 10:18:21.400759 (XEN) HPFAR_EL2: 00104810 Jun 30 10:18:21.400759 (XEN) HDFAR: e0807f00 Jun 30 10:18:21.400759 (XEN) HIFAR: c04db808 Jun 30 10:18:21.400759 (XEN) Jun 30 10:18:21.400759 (XEN) Guest stack trace from sp=c1901f40: Jun 30 10:18:21.412751 (XEN) Failed to convert stack to physical address Jun 30 10:18:21.412818 (XEN) *** Dumping Dom0 vcpu#1 state: *** Jun 30 10:18:21.412835 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Not tainted ]---- Jun 30 10:18:21.424779 (XEN) CPU: 0 Jun 30 10:18:21.424846 (XEN) PC: c031ce28 Jun 30 10:18:21.424846 (XEN) CPSR: 60070093 MODE:32-bit Guest SVC Jun 30 10:18:21.424846 (XEN) R0: 00000005 R1: 00000000 R2: 003d1019 R3: c031ce20 Jun 30 10:18:21.436746 (XEN) R4: c210e600 R5: c1b12280 R6: c1904d1c R7: c1904d78 Jun 30 10:18:21.436863 (XEN) R8: 00000000 R9: c1857e28 R10:00000000 R11:c1904d84 R12:c1b11c80 Jun 30 10:18:21.448980 (XEN) USR: SP: bec6a970 LR: b6e14685 Jun 30 10:18:21.448980 (XEN) SVC: SP: e08c9f90 LR: c0308df0 SPSR:60070013 Jun 30 10:18:21.448980 (XEN) ABT: SP: c1b22b50 LR: c03011c0 SPSR:600d0193 Jun 30 10:18:21.460761 (XEN) UND: SP: c1b22b60 LR: c0300fa0 SPSR:600f0093 Jun 30 10:18:21.460761 (XEN) IRQ: SP: c1b22b40 LR: c0300ba0 SPSR:60070193 Jun 30 10:18:21.472923 (XEN) FIQ: SP: c1b22b70 LR: c1b22b70 SPSR:00000000 Jun 30 10:18:21.472984 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Jun 30 10:18:21.484957 (XEN) Jun 30 10:18:21.485009 (XEN) SCTLR: 10c5387d Jun 30 10:18:21.485052 (XEN) TCR: 00000000 Jun 30 10:18:21.485094 (XEN) TTBR0: 000000006497006a Jun 30 10:18:21.485135 (XEN) TTBR1: 000000006020406a Jun 30 10:18:21.496908 (XEN) IFAR: b6e5ceb8, IFSR: 00000007 Jun 30 10:18:21.496963 (XEN) DFAR: b6b4d691, DFSR: 00000017 Jun 30 10:18:21.497008 (XEN) Jun 30 10:18:21.497046 (XEN) VTCR_EL2: 80003558 Jun 30 10:18:21.497087 (XEN) VTTBR_EL2: 00010000bef8a000 Jun 30 10:18:21.508768 (XEN) Jun 30 10:18:21.508822 (XEN) SCTLR_EL2: 30cd187f Jun 30 10:18:21.508865 (XEN) HCR_EL2: 007c663f Jun 30 10:18:21.508906 (XEN) TTBR0_EL2: 0000000041115000 Jun 30 10:18:21.508947 (XEN) Jun 30 10:18:21.508984 (XEN) ESR_EL2: 07e00000 Jun 30 10:18:21.520785 (XEN) HPFAR_EL2: 00104810 Jun 30 10:18:21.520843 (XEN) HDFAR: e0807f00 Jun 30 10:18:21.520886 (XEN) HIFAR: c04db808 Jun 30 10:18:21.520928 (XEN) Jun 30 10:18:21.520966 (XEN) Guest stack trace from sp=e08c9f90: Jun 30 10:18:21.532694 (XEN) Failed to convert stack to physical address Jun 30 10:18:21.532756 Jun 30 10:18:23.267651 (XEN) 'H' pressed -> dumping heap info (now = 1822440076000) Jun 30 10:18:23.288825 (XEN) heap[node=0][zone=0] -> 16282 pages Jun 30 10:18:23.288885 (XEN) heap[node=0][zone=1] -> 0 Jun 30 10:18:23.291378 pages Jun 30 10:18:23.300770 (XEN) heap[node=0][zone=2] -> 0 pages Jun 30 10:18:23.300829 (XEN) heap[node=0][zone=3] -> 0 pages Jun 30 10:18:23.300873 (XEN) heap[node=0][zone=4] -> 0 pages Jun 30 10:18:23.300915 (XEN) heap[node=0][zone=5] -> 0 pages Jun 30 10:18:23.312765 (XEN) heap[node=0][zone=6] -> 0 pages Jun 30 10:18:23.312823 (XEN) heap[node=0][zone=7] -> 0 pages Jun 30 10:18:23.312868 (XEN) heap[node=0][zone=8] -> 0 pages Jun 30 10:18:23.324722 (XEN) heap[node=0][zone=9] -> 0 pages Jun 30 10:18:23.324782 (XEN) heap[node=0][zone=10] -> 0 pages Jun 30 10:18:23.324827 (XEN) heap[node=0][zone=11] -> 0 pages Jun 30 10:18:23.324870 (XEN) heap[node=0][zone=12] -> 0 pages Jun 30 10:18:23.336753 (XEN) heap[node=0][zone=13] -> 0 pages Jun 30 10:18:23.336812 (XEN) heap[node=0][zone=14] -> 0 pages Jun 30 10:18:23.336858 (XEN) heap[node=0][zone=15] -> 0 pages Jun 30 10:18:23.348772 (XEN) heap[node=0][zone=16] -> 0 pages Jun 30 10:18:23.348832 (XEN) heap[node=0][zone=17] -> 0 pages Jun 30 10:18:23.348877 (XEN) heap[node=0][zone=18] -> 0 pages Jun 30 10:18:23.348920 (XEN) heap[node=0][zone=19] -> 130812 pages Jun 30 10:18:23.360778 (XEN) heap[node=0][zone=20] -> 241603 pages Jun 30 10:18:23.360837 (XEN) heap[node=0][zone=21] -> 0 pages Jun 30 10:18:23.360882 (XEN) heap[node=0][zone=22] -> 0 pages Jun 30 10:18:23.372790 (XEN) heap[node=0][zone=23] -> 0 pages Jun 30 10:18:23.372849 (XEN) heap[node=0][zone=24] -> 0 pages Jun 30 10:18:23.372894 (XEN) heap[node=0][zone=25] -> 0 pages Jun 30 10:18:23.384716 (XEN) heap[node=0][zone=26] -> 0 pages Jun 30 10:18:23.384766 (XEN) heap[node=0][zone=27] -> 0 pages Jun 30 10:18:23.384809 (XEN) heap[node=0][zone=28] -> 0 pages Jun 30 10:18:23.384853 Jun 30 10:18:25.331721 Jun 30 10:18:27.047253 Jun 30 10:18:27.282165 Jun 30 10:18:29.052396 Jun 30 10:18:29.287504 (XEN) Dumping timer queues: Jun 30 10:18:29.308752 (XEN) CPU00: Jun 30 10:18:29.308807 (XEN) ex= 20857us timer=43fdc968 cb=arch/arm/vtimer.c#virt_timer_expired(43fdc960) Jun 30 10:18:29.308864 ( Jun 30 10:18:29.310294 XEN) CPU01: Jun 30 10:18:29.320673 (XEN) ex= 104729us timer=43fef968 cb=arch/arm/vtimer.c#virt_timer_expired(43fef960) Jun 30 10:18:29.320742 Jun 30 10:18:31.289331 Jun 30 10:18:33.059955 Jun 30 10:18:33.267759 (XEN) 'd' pressed -> dumping registers Jun 30 10:18:33.292553 (XEN) Jun 30 10:18:33.292584 (XEN) *** Dumping CPU0 host state: *** Jun 30 10:18:33.292608 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Not tainted ]---- Jun 30 10:18:33.295428 Jun 30 10:18:33.304421 (XEN) CPU: 0 Jun 30 10:18:33.304421 (XEN) PC: 0026991c arch/arm/domain.c#idle_loop+0x134/0x1b0 Jun 30 10:18:33.304421 (XEN) CPSR: 6007005a MODE:Hypervisor Jun 30 10:18:33.304421 (XEN) R0: 00000000 R1: 002b6380 R2: 00000000 R3: 00000000 Jun 30 10:18:33.316631 (XEN) R4: 00000000 R5: 00308108 R6: 0033c33c R7: 00000001 Jun 30 10:18:33.316631 (XEN) R8: 00339108 R9: 00000000 R10:40e00000 R11:4003ff54 R12:fffffffc Jun 30 10:18:33.328508 (XEN) HYP: SP: 4003ff44 LR: 0022c434 Jun 30 10:18:33.328508 (XEN) Jun 30 10:18:33.328508 (XEN) VTCR_EL2: 80003558 Jun 30 10:18:33.328508 (XEN) VTTBR_EL2: 00010000bef8a000 Jun 30 10:18:33.340522 (XEN) Jun 30 10:18:33.340522 (XEN) SCTLR_EL2: 30cd187f Jun 30 10:18:33.340522 (XEN) HCR_EL2: 007c663f Jun 30 10:18:33.340522 (XEN) TTBR0_EL2: 0000000041115000 Jun 30 10:18:33.340522 (XEN) Jun 30 10:18:33.340522 (XEN) ESR_EL2: 07e00000 Jun 30 10:18:33.352498 (XEN) HPFAR_EL2: 00104810 Jun 30 10:18:33.352498 (XEN) HDFAR: e0807f00 Jun 30 10:18:33.352498 (XEN) HIFAR: c04db808 Jun 30 10:18:33.352498 (XEN) Jun 30 10:18:33.352498 (XEN) Xen stack trace from sp=4003ff44: Jun 30 10:18:33.364522 (XEN) 07e00000 002ac008 002a0f34 4003ff4c 002725d0 00000000 00000000 00000000 Jun 30 10:18:33.364522 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 10:18:33.376503 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 10:18:33.376503 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 10:18:33.388516 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 10:18:33.400523 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 10:18:33.400523 (XEN) Xen call trace: Jun 30 10:18:33.400523 (XEN) [<0026991c>] arch/arm/domain.c#idle_loop+0x134/0x1b0 (PC) Jun 30 10:18:33.412484 (XEN) [<0022c434>] rcu_needs_cpu+0x40/0x60 (LR) Jun 30 10:18:33.412484 (XEN) [<002725d0>] arch_get_xen_caps+0/0x90 Jun 30 10:18:33.412484 (XEN) Jun 30 10:18:33.424526 (XEN) *** Dumping CPU1 host state: *** Jun 30 10:18:33.424526 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Not tainted ]---- Jun 30 10:18:33.424526 (XEN) CPU: 1 Jun 30 10:18:33.424526 (XEN) PC: 0026991c arch/arm/domain.c#idle_loop+0x134/0x1b0 Jun 30 10:18:33.436517 (XEN) CPSR: 6003005a MODE:Hypervisor Jun 30 10:18:33.436517 (XEN) R0: 00000000 R1: 002b6380 R2: 3fcfe000 R3: 00000000 Jun 30 10:18:33.448516 (XEN) R4: 00000001 R5: 00308108 R6: 0033c33c R7: 00000002 Jun 30 10:18:33.448516 (XEN) R8: 00339108 R9: 00000001 R10:40e00000 R11:4000ff54 R12:fffffffc Jun 30 10:18:33.460477 (XEN) HYP: SP: 4000ff44 LR: 0022c434 Jun 30 10:18:33.460477 (XEN) Jun 30 10:18:33.460477 (XEN) VTCR_EL2: 80003558 Jun 30 10:18:33.460477 (XEN) VTTBR_EL2: 00010000bef8a000 Jun 30 10:18:33.460477 (XEN) Jun 30 10:18:33.472500 (XEN) SCTLR_EL2: 30cd187f Jun 30 10:18:33.472500 (XEN) HCR_EL2: 007c663f Jun 30 10:18:33.472500 (XEN) TTBR0_EL2: 00000000ba004000 Jun 30 10:18:33.472500 (XEN) Jun 30 10:18:33.472500 (XEN) ESR_EL2: 07e00000 Jun 30 10:18:33.472500 (XEN) HPFAR_EL2: 00104810 Jun 30 10:18:33.484478 (XEN) HDFAR: e0807f00 Jun 30 10:18:33.484478 (XEN) HIFAR: c0a18fe0 Jun 30 10:18:33.484478 (XEN) Jun 30 10:18:33.484478 (XEN) Xen stack trace from sp=4000ff44: Jun 30 10:18:33.484478 (XEN) 07e00000 00309390 00000001 4000ff3c 00272eac 00000000 00000000 00000000 Jun 30 10:18:33.496505 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 10:18:33.508513 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 10:18:33.508513 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 10:18:33.520546 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 10:18:33.520546 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 10:18:33.532520 (XEN) Xen call trace: Jun 30 10:18:33.532520 (XEN) [<0026991c>] arch/arm/domain.c#idle_loop+0x134/0x1b0 (PC) Jun 30 10:18:33.544458 (XEN) [<0022c434>] rcu_needs_cpu+0x40/0x60 (LR) Jun 30 10:18:33.544458 (XEN) [<00272eac>] start_secondary+0x208/0x20c Jun 30 10:18:33.544458 (XEN) Jun 30 10:18:33.544458 Jun 30 10:18:35.280931 (XEN) 'e' pressed -> dumping event-channel info Jun 30 10:18:35.295229 (XEN) Event channel information for domain 0: Jun 30 10:18:35.295289 (XEN) Polling vCPUs: {} Jun 30 10:18:35.297514 Jun 30 10:18:35.305768 (XEN) port [p/m/s] Jun 30 10:18:35.305830 (XEN) 1 [0/0/ - ]: s=3 n=1 x=0 d=0 p=4 Jun 30 10:18:35.305876 (XEN) 2 [0/0/ - ]: s=5 n=0 x=0 v=2 Jun 30 10:18:35.305920 (XEN) 3 [0/0/ - ]: s=5 n=1 x=0 v=3 Jun 30 10:18:35.320732 (XEN) 4 [0/0/ - ]: s=3 n=0 x=0 d=0 p=1 Jun 30 10:18:35.320796 Jun 30 10:18:37.302327 (XEN) gnttab_usage_print_all [ key 'g' pressed Jun 30 10:18:37.329830 (XEN) -------- active -------- -------- shared -------- Jun 30 10:18:37.329893 (XEN) [ref] localdo Jun 30 10:18:37.332266 m mfn pin localdom gmfn flags Jun 30 10:18:37.341733 (XEN) grant-table for remote d0 (v1) Jun 30 10:18:37.341789 (XEN) 1 frames (64 max), 2 maptrack frames (1024 max) Jun 30 10:18:37.353760 (XEN) no active grant table entries Jun 30 10:18:37.353817 (XEN) gnttab_usage_print_all ] done Jun 30 10:18:37.353861 Jun 30 10:18:39.324543 Jun 30 10:18:41.069061 Jun 30 10:18:41.329136 (XEN) Physical memory information: Jun 30 10:18:41.348647 (XEN) Xen heap: 65128kB free Jun 30 10:18:41.348647 (XEN) heap[19]: 523248kB free Jun 30 10:18:41.348647 (XEN) heap[20]: 966412kB fr Jun 30 10:18:41.349936 ee Jun 30 10:18:41.360406 (XEN) Dom heap: 1489660kB free Jun 30 10:18:41.360406 Jun 30 10:18:43.315928 Jun 30 10:18:45.093595 Jun 30 10:18:45.334615 (XEN) sched_smt_power_savings: disabled Jun 30 10:18:45.357841 (XEN) NOW=1844512227708 Jun 30 10:18:45.357898 (XEN) Online Cpus: 0-1 Jun 30 10:18:45.357940 (XEN) Cpupool 0: Jun 30 10:18:45.357979 (XEN) Cpus: 0-1 Jun 30 10:18:45.358017 (XEN) Sched Jun 30 10:18:45.360243 uling granularity: cpu, 1 CPU per sched-resource Jun 30 10:18:45.369738 (XEN) Scheduler: SMP Credit Scheduler rev2 (credit2) Jun 30 10:18:45.369797 (XEN) Active queues: 1 Jun 30 10:18:45.369838 (XEN) default-weight = 256 Jun 30 10:18:45.381806 (XEN) Runqueue 0: Jun 30 10:18:45.381860 (XEN) ncpus = 2 Jun 30 10:18:45.381903 (XEN) cpus = 0-1 Jun 30 10:18:45.381944 (XEN) max_weight = 256 Jun 30 10:18:45.393743 (XEN) pick_bias = 0 Jun 30 10:18:45.393800 (XEN) instload = 0 Jun 30 10:18:45.393844 (XEN) aveload = 1779 (~0%) Jun 30 10:18:45.393887 (XEN) idlers: 2 Jun 30 10:18:45.393927 (XEN) tickled: 0 Jun 30 10:18:45.405706 (XEN) fully idle cores: 2 Jun 30 10:18:45.405737 (XEN) Domain info: Jun 30 10:18:45.405760 (XEN) Domain: 0 w 256 c 0 v 2 Jun 30 10:18:45.405783 (XEN) 1: [0.0] flags=0 cpu=1 credit=1634927 [w=256] load=1394 (~0%) Jun 30 10:18:45.417773 (XEN) 2: [0.1] flags=0 cpu=0 credit=8642001 [w=256] load=327 (~0%) Jun 30 10:18:45.417857 (XEN) Runqueue 0: Jun 30 10:18:45.417902 (XEN) CPU[00] runq=0, sibling={0}, core={0-1} Jun 30 10:18:45.429714 (XEN) CPU[01] runq=0, sibling={1}, core={0-1} Jun 30 10:18:45.429773 (XEN) RUNQ: Jun 30 10:18:45.429813 (XEN) CPUs info: Jun 30 10:18:45.429852 (XEN) CPU[00] current=d[IDLE]v0, curr=d[IDLE]v0, prev=NULL Jun 30 10:18:45.441723 (XEN) CPU[01] current=d[IDLE]v1, curr=d[IDLE]v1, prev=NULL Jun 30 10:18:45.441783 Jun 30 10:18:47.321228 Jun 30 10:18:49.104094 Jun 30 10:18:49.341861 (XEN) Synced stime skew: max=125ns avg=125ns samples=1 current=125ns Jun 30 10:18:49.356729 (XEN) Synced cycles skew: max=3 avg=3 samples=1 current=3 Jun 30 10:18:49.356729 Jun 30 10:18:49.358944 Jun 30 10:18:51.330385 Jun 30 10:18:53.112117 Jun 30 10:18:53.318057 Jun 30 10:18:55.116421 Jun 30 10:18:55.343405 Jun 30 10:18:57.121311 Jun 30 10:19:07.361705 (XEN) 'q' pressed -> dumping domain info (now = 1866532415791) Jun 30 10:19:07.378679 (XEN) General information for domain 0: Jun 30 10:19:07.378760 (XEN) Jun 30 10:19:07.380598 refcnt=3 dying=0 pause_count=0 Jun 30 10:19:07.392602 (XEN) nr_pages=131072 xenheap_pages=2 dirty_cpus={} max_pages=131072 Jun 30 10:19:07.392602 (XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=00000020 Jun 30 10:19:07.404661 (XEN) p2m mappings for domain 0 (vmid 1): Jun 30 10:19:07.404661 (XEN) 1G mappings: 0 (shattered 0) Jun 30 10:19:07.404661 (XEN) 2M mappings: 234 (shattered 22) Jun 30 10:19:07.416601 (XEN) 4K mappings: 6300 Jun 30 10:19:07.416601 (XEN) Rangesets belonging to domain 0: Jun 30 10:19:07.416601 (XEN) Interrupts { 32-72, 74, 77-79, 82-84, 86, 88-100, 103-104, 107-110, 114, 116-120, 123, 126-128, 138, 144, 146-147, 149-151, 156 } Jun 30 10:19:07.428731 (XEN) I/O Memory { 2020-2050, 3810-3811, 3830-3831, 3860-3861, 10000-10001, 10010-10045, 10050-10055, 10060-10061, 101b0-101b1, 101d0-101d1, 101e0-101e1, 10440-10441, 10800-10801, 10830-10831, 10850-10851, 10a60-10a61, 10d10-10d11, 11000-11010, 11200-11201, 11210-11211, 11400-11401, 11800-11805, 11c00-11c01, 11c10-11c11, 11d40-11d41, 11f20-11f21, 12000-12010, 12100-12101, 12110-12111, 12120-12121, 12130-12131, 12170-12171, 121a0-121a1, 121b0-121b1, 121d0-121d1, 12200-12201, 12210-12211, 12220-12221, 12230-12231, 12250-12251, 122f0-122f1, 12c00-12c01, 12c10-12c11, 12c30-12c31, 12c60-12c61, 12c70-12c71, 12c80-12c81, 12c90-12c91, 12ca0-12ca1, 12cb0-12cb1, 12cc0-12cc1, 12cd0-12cd1, 12ce0-12ce1, 12d10-12d11, 12d20-12d21, 12d30-12d31, 12d40-12d41, 12d60-12d61, 12d70-12d71, 12dd0-12dd1, 13260-13261, 13270-13271, 13280-13281, 13290-13291, 132a0-132a1, 132b0-132b1, 132c0-132c1, 132d0-132d1, 132e0-132e1, 132f0-132f1, 13400-13401, 13c40-13c41, 13c50-13c51, 13e00-13e01, 13e10-13e11, 13e20-13e21, 13e30-13e31, 13e80-13e81, 13e90-13e91, 13ea0-13ea1, 13eb0-13eb1, 14400-14440, 14450-14460, 14500-14510, 14530-145a0, 145b0-145b1, 14640-14641, 14650-14651 } Jun 30 10:19:07.524934 (XEN) NODE affinity for domain 0: [0] Jun 30 10:19:07.536765 (XEN) VCPU information and callbacks for domain 0: Jun 30 10:19:07.536826 (XEN) UNIT0 affinities: hard={0-1} soft={0-1} Jun 30 10:19:07.536874 (XEN) VCPU0: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Jun 30 10:19:07.548778 (XEN) pause_count=0 pause_flags=1 Jun 30 10:19:07.548837 (XEN) GICH_LRs (vcpu 0) mask=0 Jun 30 10:19:07.548881 (XEN) VCPU_LR[0]=0 Jun 30 10:19:07.560762 (XEN) VCPU_LR[1]=0 Jun 30 10:19:07.560818 (XEN) VCPU_LR[2]=0 Jun 30 10:19:07.560900 (XEN) VCPU_LR[3]=0 Jun 30 10:19:07.560943 (XEN) No periodic timer Jun 30 10:19:07.560985 (XEN) UNIT1 affinities: hard={0-1} soft={0-1} Jun 30 10:19:07.572755 (XEN) VCPU1: CPU0 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Jun 30 10:19:07.572818 (XEN) pause_count=0 pause_flags=1 Jun 30 10:19:07.572863 (XEN) GICH_LRs (vcpu 1) mask=0 Jun 30 10:19:07.584760 (XEN) VCPU_LR[0]=0 Jun 30 10:19:07.584815 (XEN) VCPU_LR[1]=0 Jun 30 10:19:07.584857 (XEN) VCPU_LR[2]=0 Jun 30 10:19:07.584897 (XEN) VCPU_LR[3]=0 Jun 30 10:19:07.584937 (XEN) No periodic timer Jun 30 10:19:07.596730 (XEN) Notifying guest 0:0 (virq 1, port 0) Jun 30 10:19:07.596789 (XEN) Notifying guest 0:1 (virq 1, port 0) Jun 30 10:19:07.596834 Jun 30 10:19:19.357821 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 30 10:19:19.376386 Jun 30 10:19:19.376436 arndale-metrocentre login: Jun 30 10:19:19.378394 [ 1988.154321] sd 0:0:0:0: [sda] Synchronizing SCSI cache Jun 30 10:21:14.277808 [ 1988.180096] wake enabled for irq 119 (gpx1-4) Jun 30 10:21:14.301660 [ 1988.183083] wake enabled for irq 120 (gpx1-5) Jun 30 10:21:14.301694 [ 1988.187557] wake enabled for irq 121 (gpx1-6) Jun 30 10:21:14.301719 [ 1988.191936] wake enabled for irq 122 (gpx1-7) Jun 30 10:21:14.316563 [ 1988.196420] wake enabled for irq 123 (gpx2-0) Jun 30 10:21:14.316563 [ 1988.200788] wake enabled for irq 124 (gpx2-1) Jun 30 10:21:14.328560 [ 1988.205651] reboot: Resô Jun 30 10:21:14.656685 Jun 30 10:21:14.656723 Jun 30 10:21:14.656796 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 10:21:14.668590 Jun 30 10:21:14.668590 CPU: Exynos5250@1000MHz Jun 30 10:21:14.668590 Jun 30 10:21:14.668590 Board: Arndale Jun 30 10:21:14.668590 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 10:21:14.680499 ready Jun 30 10:21:14.680499 DRAM: 2 GiB Jun 30 10:21:14.680499 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 10:21:14.692559 trace: enabled Jun 30 10:21:14.728532 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 10:21:15.088724 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 10:21:15.148620 In: serial Jun 30 10:21:15.148620 Out: serial Jun 30 10:21:15.148620 Err: serial Jun 30 10:21:15.148620 SCSI: ARNDALE SCSI INIT Jun 30 10:21:15.160610 Target spinup took 0 ms. Jun 30 10:21:15.160610 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 10:21:15.172569 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 10:21:15.172569 Net: Net Initialization Skipped Jun 30 10:21:15.172569 No ethernet found. Jun 30 10:21:15.172569 Hostname: arndale-metrocentre Jun 30 10:21:15.184553 Hit any key to stop autoboot: 2  1  0 Jun 30 10:21:17.105729 (Re)start USB... Jun 30 10:21:17.105800 USB0: USB EHCI 1.00 Jun 30 10:21:17.105843 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 10:21:22.709781 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 10:21:22.709859 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 10:21:23.153711 Waiting for Ethernet connection... done. Jun 30 10:21:24.809693 BOOTP broadcast 1 Jun 30 10:21:24.809759 BOOTP broadcast 2 Jun 30 10:21:27.701735 DHCP client bound to address 10.149.64.44 (3109 ms) Jun 30 10:21:27.797786 Using asx0 device Jun 30 10:21:27.797840 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 10:21:27.797905 Filename 'pxelinux.0'. Jun 30 10:21:27.797957 Load address: 0x43e00000 Jun 30 10:21:27.809741 Loading: *### Jun 30 10:21:27.821715 2.5 MiB/s Jun 30 10:21:27.821770 done Jun 30 10:21:27.821810 Bytes transferred = 42430 (a5be hex) Jun 30 10:21:27.821855 missing environment variable: pxeuuid Jun 30 10:21:27.833759 Retrieving file: pxelinux.cfg/0A95402C Jun 30 10:21:27.833818 Using asx0 device Jun 30 10:21:27.833889 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 10:21:27.833940 Filename 'pxelinux.cfg/0A95402C'. Jun 30 10:21:27.845739 Load address: 0x51000000 Jun 30 10:21:27.845793 Loading: *# Jun 30 10:21:27.845834 358.4 KiB/s Jun 30 10:21:27.845874 done Jun 30 10:21:27.845911 Bytes transferred = 734 (2de hex) Jun 30 10:21:27.845954 Config file found Jun 30 10:21:27.857735 Ignoring unknown command: serial Jun 30 10:21:27.857792 1: ^Overwrite Jun 30 10:21:27.857833 Retrieving file: /osstest/tmp//arndale-metrocentre--initrd.gz Jun 30 10:21:27.857880 Using asx0 device Jun 30 10:21:27.857919 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 10:21:27.869751 Filename '/osstest/tmp//arndale-metrocentre--initrd.gz'. Jun 30 10:21:27.869811 Load address: 0x43300000 Jun 30 10:21:27.881677 Loading: *################################################################# Jun 30 10:21:28.193861 ################################################################# Jun 30 10:21:28.517657 ################################################################# Jun 30 10:21:28.841694 ################################################################# Jun 30 10:21:29.153688 ################################################################# Jun 30 10:21:29.477659 ################################################################# Jun 30 10:21:29.801730 ################################################################# Jun 30 10:21:30.125751 ################################################################# Jun 30 10:21:30.461666 ################################################################# Jun 30 10:21:30.785654 ################################################################# Jun 30 10:21:31.085598 ################################################################# Jun 30 10:21:31.397583 ################################################################# Jun 30 10:21:31.713720 ################################################################# Jun 30 10:21:32.041589 ################################################################# Jun 30 10:21:32.365625 ################################################################# Jun 30 10:21:32.677634 ################################################################# Jun 30 10:21:33.001729 ################################################################# Jun 30 10:21:33.337711 ################################################################# Jun 30 10:21:33.661651 ################################################################# Jun 30 10:21:33.985662 ################################################################# Jun 30 10:21:34.309700 ################################################################# Jun 30 10:21:34.633680 ################################################################# Jun 30 10:21:34.957676 ################################################################# Jun 30 10:21:35.281675 ################################################################# Jun 30 10:21:35.605607 ################################################################# Jun 30 10:21:35.929598 ################################################################# Jun 30 10:21:36.253686 ################################################################# Jun 30 10:21:36.577689 ###################################### Jun 30 10:21:36.769693 2.7 MiB/s Jun 30 10:21:36.769693 done Jun 30 10:21:36.769693 Bytes transferred = 26310350 (19176ce hex) Jun 30 10:21:36.769693 Retrieving file: /osstest/debian-installer/armhf/2024-03-26-bookworm/linux Jun 30 10:21:36.781766 Using asx0 device Jun 30 10:21:36.781826 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 10:21:36.793780 Filename '/osstest/debian-installer/armhf/2024-03-26-bookworm/linux'. Jun 30 10:21:36.793843 Load address: 0x42000000 Jun 30 10:21:36.805709 Loading: *################################################################# Jun 30 10:21:37.129619 ################################################################# Jun 30 10:21:37.453745 ################################################################# Jun 30 10:21:37.789681 ################################################################# Jun 30 10:21:38.116629 ################################################################# Jun 30 10:21:38.440586 ############################################# Jun 30 10:21:38.668751 2.7 MiB/s Jun 30 10:21:38.668844 done Jun 30 10:21:38.668916 Bytes transferred = 5423616 (52c200 hex) Jun 30 10:21:38.668993 append: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-metrocentre url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=49844 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-metrocentre--initrd.gz --- console=ttySAC2,115200n8 Jun 30 10:21:38.720777 Retrieving file: /osstest/debian-installer/armhf/2024-03-26-bookworm/dtbs/exynos5250-arndale.dtb Jun 30 10:21:38.720846 Using asx0 device Jun 30 10:21:38.732778 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 10:21:38.732840 Filename '/osstest/debian-installer/armhf/2024-03-26-bookworm/dtbs/exynos5250-arndale.dtb'. Jun 30 10:21:38.744676 Load address: 0x43000000 Jun 30 10:21:38.744730 Loading: *#### Jun 30 10:21:38.756526 2.3 MiB/s Jun 30 10:21:38.756526 done Jun 30 10:21:38.768596 Bytes transferred = 46686 (b65e hex) Jun 30 10:21:38.768596 Kernel image @ 0x42000000 [ 0x000000 - 0x52c200 ] Jun 30 10:21:38.768596 ## Flattened Device Tree blob at 43000000 Jun 30 10:21:38.768596 Booting using the fdt blob at 0x43000000 Jun 30 10:21:38.780571 Loading Ramdisk to 4e6e8000, end 4ffff6ce ... OK Jun 30 10:21:39.200662 Loading Device Tree to 4e6d9000, end 4e6e765d ... OK Jun 30 10:21:39.212557 Jun 30 10:21:39.212557 Starting kernel ...(fake run for tracing) Jun 30 10:21:39.212557 Jun 30 10:21:39.212557 Jun 30 10:21:39.224506 Starting kernel ... Jun 30 10:21:39.224506 Jun 30 10:21:39.224506 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 10:21:45.329791 [ 0.000000] Linux version 6.1.0-18-armmp (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.76-1 (2024-02-01) Jun 30 10:21:45.341770 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 30 10:21:45.353752 [ 0.000000] CPU: div instructions available: patching division code Jun 30 10:21:45.365752 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 10:21:45.365818 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 10:21:45.377762 [ 0.000000] Memory policy: Data cache writealloc Jun 30 10:21:45.377821 [ 0.000000] efi: UEFI not found. Jun 30 10:21:45.377866 [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 Jun 30 10:21:45.389654 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 10:21:45.389686 [ 0.000000] Zone ranges: Jun 30 10:21:45.389710 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Jun 30 10:21:45.401737 [ 0.000000] Normal empty Jun 30 10:21:45.401794 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Jun 30 10:21:45.413762 [ 0.000000] Movable zone start for each node Jun 30 10:21:45.413822 [ 0.000000] Early memory node ranges Jun 30 10:21:45.413868 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 10:21:45.425718 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 10:21:45.425775 [ 0.000000] percpu: Embedded 18 pages/cpu s41620 r8192 d23916 u73728 Jun 30 10:21:45.437746 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Jun 30 10:21:45.437816 [ 0.000000] Kernel command line: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-metrocentre url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=49844 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-metrocentre--initrd.gz --- console=ttySAC2,115200n8 Jun 30 10:21:45.485807 [ 0.000000] Unknown kernel command line parameters "preseed --- vga=normal auto=true hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=49844 domain=test-lab.xenproject.org", will be passed to user space. Jun 30 10:21:45.521783 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Jun 30 10:21:45.533758 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 10:21:45.545756 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Jun 30 10:21:45.545813 [ 0.000000] Memory: 2015996K/2097152K available (11264K kernel code, 1696K rwdata, 3716K rodata, 2048K init, 378K bss, 64772K reserved, 16384K cma-reserved, 1294332K highmem) Jun 30 10:21:45.569723 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 10:21:45.569786 [ 0.000000] ftrace: allocating 39582 entries in 117 pages Jun 30 10:21:45.581709 [ 0.000000] ftrace: allocated 116 pages with 4 groups Jun 30 10:21:45.581744 [ 0.000000] trace event string verifier disabled Jun 30 10:21:45.581770 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 10:21:45.593726 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Jun 30 10:21:45.593782 [ 0.000000] Rude variant of Tasks RCU enabled. Jun 30 10:21:45.605680 [ 0.000000] Tracing variant of Tasks RCU enabled. Jun 30 10:21:45.605710 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Jun 30 10:21:45.617715 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 10:21:45.617771 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 10:21:45.629718 [ 0.000000] GIC: Using split EOI/Deactivate mode Jun 30 10:21:45.629790 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 10:21:45.641706 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 10:21:45.641760 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Jun 30 10:21:45.653768 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Jun 30 10:21:45.653839 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Jun 30 10:21:45.665774 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Jun 30 10:21:45.677777 [ 0.002636] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Jun 30 10:21:45.677838 [ 0.002650] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 10:21:45.689775 [ 0.002665] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 10:21:45.701772 [ 0.002677] Ignoring duplicate/late registration of read_current_timer delay Jun 30 10:21:45.701835 [ 0.003045] Console: colour dummy device 80x30 Jun 30 10:21:45.713756 [ 0.003086] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Jun 30 10:21:45.725760 [ 0.003099] CPU: Testing write buffer coherency: ok Jun 30 10:21:45.725820 [ 0.003141] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 10:21:45.737770 [ 0.003149] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 10:21:45.737832 [ 0.003155] pid_max: default: 32768 minimum: 301 Jun 30 10:21:45.749793 [ 0.003515] LSM: Security Framework initializing Jun 30 10:21:45.749854 [ 0.003586] landlock: Up and running. Jun 30 10:21:45.749900 [ 0.003591] Yama: disabled by default; enable with sysctl kernel.yama.* Jun 30 10:21:45.761708 [ 0.003778] AppArmor: AppArmor initialized Jun 30 10:21:45.761760 [ 0.003790] TOMOYO Linux initialized Jun 30 10:21:45.773706 [ 0.003832] LSM support for eBPF active Jun 30 10:21:45.773757 [ 0.004077] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 10:21:45.773810 [ 0.004092] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 10:21:45.785729 [ 0.005525] /cpus/cpu@0 missing clock-frequency property Jun 30 10:21:45.797743 [ 0.005552] /cpus/cpu@1 missing clock-frequency property Jun 30 10:21:45.797805 [ 0.005565] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 10:21:45.797853 [ 0.006515] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 10:21:45.809709 [ 0.006522] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 10:21:45.821718 [ 0.006626] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 10:21:45.821802 [ 0.006632] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 10:21:45.833759 [ 0.006778] Setting up static identity map for 0x40300000 - 0x403000ac Jun 30 10:21:45.833822 [ 0.007945] rcu: Hierarchical SRCU implementation. Jun 30 10:21:45.845757 [ 0.007951] rcu: Max phase no-delay instances is 1000. Jun 30 10:21:45.845791 [ 0.010091] EFI services will not be available. Jun 30 10:21:45.845840 [ 0.010436] smp: Bringing up secondary CPUs ... Jun 30 10:21:45.857734 [ 0.011182] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 10:21:45.857789 [ 0.011194] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 10:21:45.869741 [ 0.011322] smp: Brought up 1 node, 2 CPUs Jun 30 10:21:45.869772 [ 0.011331] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 10:21:45.881658 [ 0.011338] CPU: All CPU(s) started in HYP mode. Jun 30 10:21:45.881691 [ 0.011342] CPU: Virtualization extensions available. Jun 30 10:21:45.893779 [ 0.012000] devtmpfs: initialized Jun 30 10:21:45.893836 [ 0.023050] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 10:21:45.905752 [ 0.023304] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Jun 30 10:21:45.905823 [ 0.023328] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 10:21:45.917741 [ 0.023836] pinctrl core: initialized pinctrl subsystem Jun 30 10:21:45.917802 [ 0.024568] DMI not present or invalid. Jun 30 10:21:45.929762 [ 0.025245] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 10:21:45.929824 [ 0.030622] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 10:21:45.941775 [ 0.032181] audit: initializing netlink subsys (disabled) Jun 30 10:21:45.941836 [ 0.032385] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 Jun 30 10:21:45.953801 [ 0.033548] thermal_sys: Registered thermal governor 'fair_share' Jun 30 10:21:45.953862 [ 0.033555] thermal_sys: Registered thermal governor 'bang_bang' Jun 30 10:21:45.965760 [ 0.033560] thermal_sys: Registered thermal governor 'step_wise' Jun 30 10:21:45.965794 [ 0.033564] thermal_sys: Registered thermal governor 'user_space' Jun 30 10:21:45.977715 [ 0.033569] thermal_sys: Registered thermal governor 'power_allocator' Jun 30 10:21:45.977749 [ 0.033939] No ATAGs? Jun 30 10:21:45.989751 [ 0.034008] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jun 30 10:21:45.989819 [ 0.034017] hw-breakpoint: maximum watchpoint size is 8 bytes. Jun 30 10:21:46.001714 [ 0.035104] Serial: AMBA PL011 UART driver Jun 30 10:21:46.001767 [ 0.091399] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Jun 30 10:21:46.013808 [ 0.102444] iommu: Default domain type: Translated Jun 30 10:21:46.013869 [ 0.102453] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 10:21:46.025731 [ 0.103445] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Jun 30 10:21:46.025794 [ 0.104003] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 10:21:46.037716 [ 0.104016] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 10:21:46.037778 [ 0.104667] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 10:21:46.049733 [ 0.104697] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 10:21:46.061732 [ 0.104881] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 10:21:46.061786 [ 0.105237] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 10:21:46.073722 [ 0.105247] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 10:21:46.073777 [ 0.105644] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 10:21:46.073823 [ 0.105936] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 10:21:46.085725 [ 0.105946] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 10:21:46.085778 [ 0.106222] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 10:21:46.097723 [ 0.106323] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 10:21:46.097776 [ 0.106333] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 10:21:46.109722 [ 0.106531] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 10:21:46.109774 [ 0.106733] pps_core: LinuxPPS API ver. 1 registered Jun 30 10:21:46.109821 [ 0.106738] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 10:21:46.121758 [ 0.106754] PTP clock support registered Jun 30 10:21:46.133714 [ 0.108250] NetLabel: Initializing Jun 30 10:21:46.133765 [ 0.108256] NetLabel: domain hash size = 128 Jun 30 10:21:46.133810 [ 0.108261] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Jun 30 10:21:46.145724 [ 0.108331] NetLabel: unlabeled traffic allowed by default Jun 30 10:21:46.145757 [ 0.108491] vgaarb: loaded Jun 30 10:21:46.145780 [ 0.109167] clocksource: Switched to clocksource mct-frc Jun 30 10:21:46.157788 [ 0.177861] VFS: Disk quotas dquot_6.6.0 Jun 30 10:21:46.157846 [ 0.177953] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jun 30 10:21:46.169731 [ 0.178682] AppArmor: AppArmor Filesystem Enabled Jun 30 10:21:46.169760 [ 0.187739] NET: Registered PF_INET protocol family Jun 30 10:21:46.181710 [ 0.187950] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Jun 30 10:21:46.181769 [ 0.189579] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 10:21:46.193775 [ 0.189670] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 10:21:46.193841 [ 0.189694] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Jun 30 10:21:46.205802 [ 0.189788] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Jun 30 10:21:46.217700 [ 0.190017] TCP: Hash tables configured (established 8192 bind 8192) Jun 30 10:21:46.217734 [ 0.190240] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Jun 30 10:21:46.229711 [ 0.190327] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 10:21:46.229745 [ 0.190366] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 10:21:46.241800 [ 0.190569] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 10:21:46.241861 [ 0.190603] NET: Registered PF_XDP protocol family Jun 30 10:21:46.253779 [ 0.190614] PCI: CLS 0 bytes, default 64 Jun 30 10:21:46.253837 [ 0.191129] Trying to unpack rootfs image as initramfs... Jun 30 10:21:46.265769 [ 0.191541] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Jun 30 10:21:46.265842 [ 0.191775] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Jun 30 10:21:46.277818 [ 0.193423] Initialise system trusted keyrings Jun 30 10:21:46.277878 [ 0.193534] Key type blacklist registered Jun 30 10:21:46.289726 [ 0.193766] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Jun 30 10:21:46.289761 [ 0.200944] zbud: loaded Jun 30 10:21:46.289784 [ 0.202592] integrity: Platform Keyring initialized Jun 30 10:21:46.301703 [ 0.202632] integrity: Machine keyring initialized Jun 30 10:21:46.301735 [ 0.202641] Key type asymmetric registered Jun 30 10:21:46.313727 [ 0.202647] Asymmetric key parser 'x509' registered Jun 30 10:21:46.313759 [ 1.562993] Freeing initrd memory: 25696K Jun 30 10:21:46.313784 [ 1.574844] alg: self-tests for CTR-KDF (hmac(sha256)) passed Jun 30 10:21:46.328655 [ 1.575129] bounce: pool size: 64 pages Jun 30 10:21:46.328655 [ 1.575294] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Jun 30 10:21:46.340592 [ 1.575460] io scheduler mq-deadline registered Jun 30 10:21:46.340592 [ 1.580621] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Jun 30 10:21:46.352578 [ 1.601540] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 10:21:46.352578 [ 1.601551] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 10:21:46.364570 [ 1.603841] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 10:21:46.376575 [ 1.603851] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 10:21:46.388557 [ 1.604641] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 10:21:46.388557 [ 1.604650] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 10:21:46.400571 [ 1.605535] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 10:21:46.412573 [ 1.605544] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 10:21:46.412573 [ 1.607883] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 10:21:46.424593 [ 1.610708] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 10:21:46.436732 [ 1.613490] Serial: AMBA driver Jun 30 10:21:46.436732 [ 1.613740] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 10:21:46.448723 [ 1.614238] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 10:21:46.448782 [ 1.614687] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 10:21:46.460550 [ 2.745577] printk: console [ttySAC2] enabled Jun 30 10:21:46.460550 [ 2.750391] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Jun 30 10:21:46.472557 [ 2.761069] STM32 USART driver initialized Jun 30 10:21:46.484484 [ 2.775211] mousedev: PS/2 mouse device common for all mice Jun 30 10:21:46.496518 [ 2.806400] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 10:21:46.520512 [ 2.815028] s5m-rtc s5m-rtc: setting system clock to 2024-06-30T10:21:48 UTC (1719742908) Jun 30 10:21:46.532600 [ 2.824908] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Jun 30 10:21:46.544573 [ 2.832366] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 10:21:46.556549 [ 2.840336] NET: Registered PF_INET6 protocol family Jun 30 10:21:46.556549 [ 2.854224] Segment Routing with IPv6 Jun 30 10:21:46.568537 [ 2.856466] In-situ OAM (IOAM) with IPv6 Jun 30 10:21:46.580568 [ 2.860466] mip6: Mobile IPv6 Jun 30 10:21:46.580568 [ 2.863404] NET: Registered PF_PACKET protocol family Jun 30 10:21:46.580568 [ 2.868456] mpls_gso: MPLS GSO support Jun 30 10:21:46.592558 [ 2.872766] ThumbEE CPU extension supported. Jun 30 10:21:46.592558 [ 2.876329] Registering SWP/SWPB emulation handler Jun 30 10:21:46.592558 [ 2.881647] registered taskstats version 1 Jun 30 10:21:46.604502 [ 2.885203] Loading compiled-in X.509 certificates Jun 30 10:21:46.604502 [ 3.341843] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Jun 30 10:21:47.061833 [ 3.349219] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Jun 30 10:21:47.073804 [ 3.360135] zswap: loaded using pool lzo/zbud Jun 30 10:21:47.085725 [ 3.364174] Key type .fscrypt registered Jun 30 10:21:47.085781 [ 3.367499] Key type fscrypt-provisioning registered Jun 30 10:21:47.085828 [ 3.381299] Key type encrypted registered Jun 30 10:21:47.097716 [ 3.383843] AppArmor: AppArmor sha1 policy hashing enabled Jun 30 10:21:47.109745 [ 3.389371] ima: No TPM chip found, activating TPM-bypass! Jun 30 10:21:47.109832 [ 3.394803] ima: Allocated hash algorithm: sha256 Jun 30 10:21:47.121796 [ 3.399701] ima: No architecture policies found Jun 30 10:21:47.121880 [ 3.404077] evm: Initialising EVM extended attributes: Jun 30 10:21:47.121959 [ 3.409114] evm: security.selinux Jun 30 10:21:47.133841 [ 3.412409] evm: security.SMACK64 (disabled) Jun 30 10:21:47.133914 [ 3.416662] evm: security.SMACK64EXEC (disabled) Jun 30 10:21:47.133960 [ 3.421269] evm: security.SMACK64TRANSMUTE (disabled) Jun 30 10:21:47.145784 [ 3.426299] evm: security.SMACK64MMAP (disabled) Jun 30 10:21:47.145845 [ 3.430897] evm: security.apparmor Jun 30 10:21:47.145890 [ 3.434282] evm: security.ima Jun 30 10:21:47.145931 [ 3.437234] evm: security.capability Jun 30 10:21:47.157722 [ 3.440777] evm: HMAC attrs: 0x1 Jun 30 10:21:47.157778 [ 4.023705] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 10:21:47.745644 [ 4.050031] Freeing unused kernel image (initmem) memory: 2048K Jun 30 10:21:47.769666 [ 4.054902] Checked W+X mappings: passed, no W+X pages found Jun 30 10:21:47.769699 [ 4.060157] Run /init as init process Jun 30 10:21:47.781589 [ 4.609480] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 10:21:48.333605 [ 4.687318] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 10:21:48.405730 [ 4.708186] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 10:21:48.429811 [ 4.716168] usbcore: registered new interface driver usbfs Jun 30 10:21:48.429906 [ 4.721526] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 10:21:48.441820 [ 4.746144] usbcore: registered new interface driver hub Jun 30 10:21:48.465732 [ 4.766029] usbcore: registered new device driver usb Jun 30 10:21:48.477735 [ 4.774003] phy phy-12130000.phy.3: phy_power_on was called before phy_init Jun 30 10:21:48.489795 [ 4.802136] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 10:21:48.513742 [ 4.818772] phy phy-12130000.phy.3: phy_power_on was called before phy_init Jun 30 10:21:48.537728 [ 4.824663] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 10:21:48.537787 [ 4.854770] exynos-ohci 12120000.usb: USB Host Controller Jun 30 10:21:48.573676 [ 4.869458] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Jun 30 10:21:48.585702 [ 4.886572] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Jun 30 10:21:48.609667 [ 4.905364] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Jun 30 10:21:48.621710 [ 4.913226] usb3503 usb-hub: switched to HUB mode Jun 30 10:21:48.633715 [ 4.916477] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 10:21:48.633769 [ 4.922621] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Jun 30 10:21:48.645749 [ 4.933512] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 10:21:48.645803 [ 4.940954] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 10:21:48.657722 [ 4.947833] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 10:21:48.669833 [ 4.954979] usb usb1: Product: EHCI Host Controller Jun 30 10:21:48.669895 [ 4.959842] usb usb1: Manufacturer: Linux 6.1.0-18-armmp ehci_hcd Jun 30 10:21:48.685843 [ 4.965916] usb usb1: SerialNumber: 12110000.usb Jun 30 10:21:48.685910 [ 4.975323] hub 1-0:1.0: USB hub found Jun 30 10:21:48.697860 [ 4.979432] hub 1-0:1.0: 3 ports detected Jun 30 10:21:48.697939 [ 4.991980] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Jun 30 10:21:48.709831 [ 4.998838] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 10:21:48.721807 [ 5.006000] usb usb2: Product: USB Host Controller Jun 30 10:21:48.721885 [ 5.010773] usb usb2: Manufacturer: Linux 6.1.0-18-armmp ohci_hcd Jun 30 10:21:48.733771 [ 5.016847] usb usb2: SerialNumber: 12120000.usb Jun 30 10:21:48.733849 [ 5.089383] hub 2-0:1.0: USB hub found Jun 30 10:21:48.805655 [ 5.092505] hub 2-0:1.0: 3 ports detected Jun 30 10:21:48.817583 [ 5.149885] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 10:21:48.865873 [ 5.153995] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 10:21:48.877776 [ 5.162267] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 Jun 30 10:21:48.889741 [ 5.171028] xhci-hcd xhci-hcd.2.auto: irq 108, io mem 0x12000000 Jun 30 10:21:48.889808 [ 5.180827] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 10:21:48.901741 [ 5.184980] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 10:21:48.913766 [ 5.192510] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 10:21:48.913828 [ 5.199180] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 10:21:48.925772 [ 5.207263] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 10:21:48.925838 [ 5.214453] usb usb3: Product: xHCI Host Controller Jun 30 10:21:48.937752 [ 5.219318] usb usb3: Manufacturer: Linux 6.1.0-18-armmp xhci-hcd Jun 30 10:21:48.937752 [ 5.225392] usb usb3: SerialNumber: xhci-hcd.2.auto Jun 30 10:21:48.949661 [ 5.230856] hub 3-0:1.0: USB hub found Jun 30 10:21:48.949697 [ 5.234031] hub 3-0:1.0: 1 port detected Jun 30 10:21:48.949722 [ 5.238409] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 10:21:48.961661 [ 5.245988] usb 1-3: new high-speed USB device number 2 using exynos-ehci Jun 30 10:21:48.973652 [ 5.252872] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Jun 30 10:21:48.973690 [ 5.260985] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 10:21:48.985658 [ 5.268197] usb usb4: Product: xHCI Host Controller Jun 30 10:21:48.985690 [ 5.273046] usb usb4: Manufacturer: Linux 6.1.0-18-armmp xhci-hcd Jun 30 10:21:48.997760 [ 5.279125] usb usb4: SerialNumber: xhci-hcd.2.auto Jun 30 10:21:48.997820 [ 5.284745] hub 4-0:1.0: USB hub found Jun 30 10:21:49.009701 [ 5.287746] hub 4-0:1.0: 1 port detected Jun 30 10:21:49.009760 [ 5.447693] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Jun 30 10:21:49.165742 [ 5.454430] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jun 30 10:21:49.177781 Starting system log daemon: syslogd, [ 5.467961] hub 1-3:1.0: USB hub found Jun 30 10:21:49.189742 klogd. Jun 30 10:21:49.189794 /var/run/utmp: No such file or directory Jun 30 10:21:51.049685 [?1h=(B   Jun 30 10:21:51.097711  Jun 30 10:21:51.097756 [  (-*) ][ Jun 30 10:21 ] Jun 30 10:21:51.109775 [  (0*start) ][ Jun 30 10:21 ] Jun 30 10:21:51.121835 [  (0*start) ][ Jun 30 10:21 ] Jun 30 10:21:51.145738 [  (0*start) ][ Jun 30 10:21 ] Jun 30 10:21:51.157761 [  (0*start) ][ Jun 30 10:21 ]                        [  (0*start) ][ Jun 30 10:21 ][  (0*start) ][ Jun 30 10:21 ] Jun 30 10:21:51.205775 [ 0- start  (2*shell) ][ Jun 30 10:21 ] Jun 30 10:21:51.229715 [ 0- start  (2*shell) ][ Jun 30 10:21 ] Jun 30 10:21:51.241704 [ 0- start  (2*shell) ][ Jun 30 10:21 ] Jun 30 10:21:51.253703 [ 0- start  (2*shell) ][ Jun 30 10:21 ]                        [ 0- start  (2*shell) ][ Jun 30 10:21 ][ 0- start  (2*shell) ][ Jun 30 10:21 ] Jun 30 10:21:51.313759 [ 0 start 2- shell  (3*shell) ][ Jun 30 10:21 ] Jun 30 10:21:51.325653 [ 0 start 2- shell  (3*shell) ][ Jun 30 10:21 ] Jun 30 10:21:51.337758 [ 0 start 2- shell  (3*shell) ][ Jun 30 10:21 ] Jun 30 10:21:51.349726 [ 0 start 2- shell  (3*shell) ][ Jun 30 10:21 ]                        [ 0 start 2- shell  (3*shell) ][ Jun 30 10:21 ][ 0 start 2- shell  (3*shell) ][ Jun 30 10:21 ] Jun 30 10:21:51.409766 [ 0 start 2 shell 3- shell  (4*log) ][ Jun 30 10:21 ] Jun 30 10:21:51.421761 [ 0 start 2 shell 3- shell  (4*log) ][ Jun 30 10:21 ] Jun 30 10:21:51.433690 [ 0 start 2 shell 3- shell  (4*log) ][ Jun 30 10:21 ] Jun 30 10:21:51.445721 [ 0 start 2 shell 3- shell  (4*log) ][ Jun 30 10:21 ]                        [ 0 start 2 shell 3- shell  (4*log) ][ Jun 30 10:21 ][ 0 start 2 shell 3- shell  (4*log) ][ Jun 30 10:21 ] Jun 30 10:21:51.505710 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30 10:21 ] Jun 30 10:21:51.517770 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30 10:21 ] Jun 30 10:21:51.529770 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30 10:21 ] Jun 30 10:21:51.541784 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30 10:21 ]                        [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30 10:21 ][ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30 10:21 ] Jun 30 10:21:51.601704 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 10:21 ] Jun 30 10:21:51.613766 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 10:21 ] Jun 30 10:21:51.625738 [  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 10:21 ] Jun 30 10:21:52.085666 Detecting network hardware ... 2%... 95%... 100% Jun 30 10:21:53.825686 Detecting link on eth0; please wait... ... 0%... 10%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 10:22 ]... 20% Jun 30 10:21:58.721762 Waiting for link-local address... ... 8%... 16%... 25%... 33%... 41%... 50%... 100% Jun 30 10:22:00.257723 Attempting IPv6 autoconfiguration... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 75%... 83%... 91%... 100% Jun 30 10:22:06.333719 Configuring the network with DHCP ... 0%... 100% Jun 30 10:22:09.497638 Checking the Debian archive mirror ... 25%... 50%... 75%... 100% Jun 30 10:22:17.637723 Loading additional components ... 0%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Jun 30 10:22:51.637742 Setting up the clock ... 0%... 100% Jun 30 10:22:54.433719 Loading additional components ... 50%... 100% Jun 30 10:22:56.125735 Detecting disks and all other hardware ... 2%... 95%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 10:23 ]... 100% Jun 30 10:23:00.373593 Loading additional components ... 5%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Jun 30 10:23:09.205514 Loading additional components ... 25%... 50%... 75%... 100% Jun 30 10:23:11.605777 Starting up the partitioner ... 4%... 13%... 21%... 30%... 43%... 52%... 60%... 73%... 82%... 91%... 100% Jun 30 10:23:22.697649 Guided partitioning ... 16%... 33%... 50%... 66%... 83%... 100% Jun 30 10:23:31.125750 Starting up the partitioner ... 4%... 12%... 20%... 32%... 40%... 52%... 60%... 72%... 80%... 92%... 100% Jun 30 10:23:41.301624 Partitions formatting ... 33% Jun 30 10:23:49.933751 Partitions formatting Partitions formatting [  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 10:24 ] Installing the base system ... 0%... 17%... 20%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 10:25 ]... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 10:26 ]... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 10:27 ]... 48%... 50%...  Jun 30 10:27:51.433807  60%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 10:28 ]... 70%... 79%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 10:29 ]... 83%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 10:30 ][  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 10:31 ]... 91%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 10:32 ]... 100% Jun 30 10:32:19.392483 Configuring apt ... 7%... 14%... 14%... 21%... 35%... 42%... 50%... 60%... 71%. Jun 30 10:32:57.001612 ... 82%... 92%... 100% Jun 30 10:32:59.725679 [  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 10:33 ] Select and install software ... 1%... 10%... 13%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 10:34 ]... 20%... 30%... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 10:35 ]... 50%... Jun 30 10:35:45.924661 . 60%... 70%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 10:36 ]... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 10:37 ]... 88%... 90%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 10:38 ]... 94%... 100% Jun 30 10:38:57.640525 [  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 10:39 ] Finishing the installation ... 4%... 12%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 10:40 ]... 16%... 20%... 32%... 40%... 44%... Jun 30 10:40:44.321699  52%... 60%... 72%... 80%... 92% The system is going down NOW! Jun 30 10:40:54.597759 Sent SIGTERM Sent SIGKILL to all processes Jun 30 10:40:55.597751 Requesting system reboot Jun 30 10:40:55.597825 [ 1152.922100] reboot: Re˙ Jun 30 10:40:56.965658 Jun 30 10:40:56.965658 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 10:40:56.965658 Jun 30 10:40:56.965658 CPU: Exynos5250@1000MHz Jun 30 10:40:56.965658 Jun 30 10:40:56.965658 Board: Arndale Jun 30 10:40:56.977648 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 10:40:56.977648 ready Jun 30 10:40:56.977648 DRAM: 2 GiB Jun 30 10:40:56.977648 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 10:40:57.001590 trace: enabled Jun 30 10:40:57.037596 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 10:40:57.397603 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 10:40:57.445627 In: serial Jun 30 10:40:57.445627 Out: serial Jun 30 10:40:57.457650 Err: serial Jun 30 10:40:57.457650 SCSI: ARNDALE SCSI INIT Jun 30 10:40:57.457650 Target spinup took 0 ms. Jun 30 10:40:57.457650 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 10:40:57.469678 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 10:40:57.469678 Net: Net Initialization Skipped Jun 30 10:40:57.469678 No ethernet found. Jun 30 10:40:57.481646 Hostname: arndale-metrocentre Jun 30 10:40:57.481646 Hit any key to stop autoboot: 2  1  0 Jun 30 10:40:59.401641 (Re)start USB... Jun 30 10:40:59.401641 USB0: USB EHCI 1.00 Jun 30 10:40:59.413728 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 10:41:05.005776 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 10:41:05.017758 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 10:41:05.461699 Waiting for Ethernet connection... done. Jun 30 10:41:07.105680 BOOTP broadcast 1 Jun 30 10:41:07.105736 BOOTP broadcast 2 Jun 30 10:41:08.341774 DHCP client bound to address 10.149.64.44 (1292 ms) Jun 30 10:41:08.353754 Using asx0 device Jun 30 10:41:08.353809 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 10:41:08.353858 Filename 'pxelinux.0'. Jun 30 10:41:08.353899 Load address: 0x43e00000 Jun 30 10:41:08.353951 Loading: *### Jun 30 10:41:08.377710 2.4 MiB/s Jun 30 10:41:08.377764 done Jun 30 10:41:08.377804 Bytes transferred = 42430 (a5be hex) Jun 30 10:41:08.377848 missing environment variable: pxeuuid Jun 30 10:41:08.377891 Retrieving file: pxelinux.cfg/0A95402C Jun 30 10:41:08.389714 Using asx0 device Jun 30 10:41:08.389714 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 10:41:08.389714 Filename 'pxelinux.cfg/0A95402C'. Jun 30 10:41:08.401728 Load address: 0x51000000 Jun 30 10:41:08.401788 Loading: *# Jun 30 10:41:08.401830 31.3 KiB/s Jun 30 10:41:08.401869 done Jun 30 10:41:08.401906 Bytes transferred = 65 (41 hex) Jun 30 10:41:08.401948 Config file found Jun 30 10:41:08.401988 Ignoring unknown command: serial Jun 30 10:41:08.413589 1: local Jun 30 10:41:08.413615 scanning bus for devices... Jun 30 10:41:08.413638 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 10:41:08.425655 Type: Hard Disk Jun 30 10:41:08.437727 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 10:41:08.437781 Found 1 device(s). Jun 30 10:41:08.437822 Jun 30 10:41:08.437858 SCSI device 0: Jun 30 10:41:08.437897 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 10:41:08.449739 Type: Hard Disk Jun 30 10:41:08.449795 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 10:41:08.461676 ... is now current device Jun 30 10:41:08.461732 Scanning scsi 0... Jun 30 10:41:08.461774 Found U-Boot script /boot.scr Jun 30 10:41:08.581658 641 bytes read in 41 ms (14.6 KiB/s) Jun 30 10:41:08.617713 ## Executing script at 50000000 Jun 30 10:41:08.629693 Loading dtbs/exynos5250-arndale.dtb Jun 30 10:41:08.629751 46686 bytes read in 1459 ms (30.3 KiB/s) Jun 30 10:41:10.045758 Loading vmlinuz-6.1.0-22-armmp-lpae Jun 30 10:41:10.057706 5505536 bytes read in 188 ms (27.9 MiB/s) Jun 30 10:41:10.249801 Loading initrd.img-6.1.0-22-armmp-lpae Jun 30 10:41:10.261665 25720825 bytes read in 1888 ms (13 MiB/s) Jun 30 10:41:12.097798 Booting Jun 30 10:41:12.097857 Kernel image @ 0x42000000 [ 0x000000 - 0x540200 ] Jun 30 10:41:12.097904 ## Flattened Device Tree blob at 43000000 Jun 30 10:41:12.109777 Booting using the fdt blob at 0x43000000 Jun 30 10:41:12.109837 Loading Ramdisk to 4e778000, end 4ffff7f9 ... OK Jun 30 10:41:12.517673 Loading Device Tree to 4e769000, end 4e77765d ... OK Jun 30 10:41:12.529714 Jun 30 10:41:12.529763 Starting kernel ...(fake run for tracing) Jun 30 10:41:12.541718 Jun 30 10:41:12.541767 Jun 30 10:41:12.541805 Starting kernel ... Jun 30 10:41:12.541844 Jun 30 10:41:12.541880 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 10:41:18.697770 [ 0.000000] Linux version 6.1.0-22-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.94-1 (2024-06-21) Jun 30 10:41:18.709787 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=30c5387d Jun 30 10:41:18.721803 [ 0.000000] CPU: div instructions available: patching division code Jun 30 10:41:18.721867 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 10:41:18.733777 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 10:41:18.733847 [ 0.000000] Memory policy: Data cache writealloc Jun 30 10:41:18.745780 [ 0.000000] efi: UEFI not found. Jun 30 10:41:18.745837 [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000 Jun 30 10:41:18.757708 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 10:41:18.757761 [ 0.000000] Zone ranges: Jun 30 10:41:18.757804 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Jun 30 10:41:18.769728 [ 0.000000] Normal empty Jun 30 10:41:18.769777 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Jun 30 10:41:18.769825 [ 0.000000] Movable zone start for each node Jun 30 10:41:18.781728 [ 0.000000] Early memory node ranges Jun 30 10:41:18.781779 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 10:41:18.781827 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 10:41:18.793702 [ 0.000000] percpu: Embedded 18 pages/cpu s44756 r8192 d20780 u73728 Jun 30 10:41:18.805688 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Jun 30 10:41:18.805744 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=ttySAC2,115200n8 Jun 30 10:41:18.817719 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Jun 30 10:41:18.829752 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 10:41:18.829811 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Jun 30 10:41:18.841774 [ 0.000000] Memory: 2015520K/2097152K available (12288K kernel code, 1714K rwdata, 3748K rodata, 2048K init, 382K bss, 65248K reserved, 16384K cma-reserved, 1294332K highmem) Jun 30 10:41:18.853775 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 10:41:18.865763 [ 0.000000] ftrace: allocating 39982 entries in 118 pages Jun 30 10:41:18.865825 [ 0.000000] ftrace: allocated 118 pages with 5 groups Jun 30 10:41:18.877784 [ 0.000000] trace event string verifier disabled Jun 30 10:41:18.877844 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 10:41:18.877892 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Jun 30 10:41:18.889830 [ 0.000000] Rude variant of Tasks RCU enabled. Jun 30 10:41:18.889891 [ 0.000000] Tracing variant of Tasks RCU enabled. Jun 30 10:41:18.901761 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Jun 30 10:41:18.901830 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 10:41:18.913785 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 10:41:18.913847 [ 0.000000] GIC: Using split EOI/Deactivate mode Jun 30 10:41:18.925757 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 10:41:18.925822 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 10:41:18.937829 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Jun 30 10:41:18.937893 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Jun 30 10:41:18.949775 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Jun 30 10:41:18.961752 [ 0.000019] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Jun 30 10:41:18.961819 [ 0.002636] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Jun 30 10:41:18.973772 [ 0.002650] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 10:41:18.985785 [ 0.002664] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 10:41:18.985855 [ 0.002676] Ignoring duplicate/late registration of read_current_timer delay Jun 30 10:41:18.997820 [ 0.003039] Console: colour dummy device 80x30 Jun 30 10:41:18.997878 [ 0.003080] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Jun 30 10:41:19.009777 [ 0.003093] CPU: Testing write buffer coherency: ok Jun 30 10:41:19.021737 [ 0.003137] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 10:41:19.021810 [ 0.003144] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 10:41:19.033757 [ 0.003151] pid_max: default: 32768 minimum: 301 Jun 30 10:41:19.033817 [ 0.003509] LSM: Security Framework initializing Jun 30 10:41:19.045793 [ 0.003580] landlock: Up and running. Jun 30 10:41:19.045852 [ 0.003585] Yama: disabled by default; enable with sysctl kernel.yama.* Jun 30 10:41:19.057773 [ 0.003769] AppArmor: AppArmor initialized Jun 30 10:41:19.057832 [ 0.003780] TOMOYO Linux initialized Jun 30 10:41:19.057877 [ 0.003825] LSM support for eBPF active Jun 30 10:41:19.057921 [ 0.004070] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 10:41:19.069788 [ 0.004084] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 10:41:19.081766 [ 0.005488] /cpus/cpu@0 missing clock-frequency property Jun 30 10:41:19.081826 [ 0.005515] /cpus/cpu@1 missing clock-frequency property Jun 30 10:41:19.093761 [ 0.005528] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 10:41:19.093823 [ 0.006474] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 10:41:19.105819 [ 0.006480] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 10:41:19.105881 [ 0.006582] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 10:41:19.117840 [ 0.006588] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 10:41:19.117901 [ 0.006728] Setting up static identity map for 0x40400000 - 0x404000ac Jun 30 10:41:19.129755 [ 0.007895] rcu: Hierarchical SRCU implementation. Jun 30 10:41:19.129815 [ 0.007900] rcu: Max phase no-delay instances is 1000. Jun 30 10:41:19.141686 [ 0.010030] EFI services will not be available. Jun 30 10:41:19.141686 [ 0.010366] smp: Bringing up secondary CPUs ... Jun 30 10:41:19.141686 [ 0.011104] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 10:41:19.153701 [ 0.011115] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 10:41:19.165725 [ 0.011245] smp: Brought up 1 node, 2 CPUs Jun 30 10:41:19.165765 [ 0.011254] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 10:41:19.177774 [ 0.011262] CPU: All CPU(s) started in HYP mode. Jun 30 10:41:19.177839 [ 0.011266] CPU: Virtualization extensions available. Jun 30 10:41:19.177886 [ 0.012127] devtmpfs: initialized Jun 30 10:41:19.189748 [ 0.022916] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 10:41:19.189816 [ 0.023149] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Jun 30 10:41:19.201790 [ 0.023173] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 10:41:19.213796 [ 0.023707] pinctrl core: initialized pinctrl subsystem Jun 30 10:41:19.213858 [ 0.024454] DMI not present or invalid. Jun 30 10:41:19.213903 [ 0.025128] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 10:41:19.225749 [ 0.026675] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 10:41:19.225813 [ 0.028170] audit: initializing netlink subsys (disabled) Jun 30 10:41:19.237760 [ 0.028375] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 Jun 30 10:41:19.249738 [ 0.029552] thermal_sys: Registered thermal governor 'fair_share' Jun 30 10:41:19.249802 [ 0.029559] thermal_sys: Registered thermal governor 'bang_bang' Jun 30 10:41:19.261768 [ 0.029564] thermal_sys: Registered thermal governor 'step_wise' Jun 30 10:41:19.261831 [ 0.029568] thermal_sys: Registered thermal governor 'user_space' Jun 30 10:41:19.273772 [ 0.029573] thermal_sys: Registered thermal governor 'power_allocator' Jun 30 10:41:19.273835 [ 0.029769] No ATAGs? Jun 30 10:41:19.273878 [ 0.029837] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jun 30 10:41:19.285759 [ 0.029846] hw-breakpoint: maximum watchpoint size is 8 bytes. Jun 30 10:41:19.285819 [ 0.030927] Serial: AMBA PL011 UART driver Jun 30 10:41:19.297754 [ 0.080481] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 30 10:41:19.297823 [ 0.087352] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Jun 30 10:41:19.309763 [ 0.091800] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages Jun 30 10:41:19.321791 [ 0.091808] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page Jun 30 10:41:19.321855 [ 0.098633] iommu: Default domain type: Translated Jun 30 10:41:19.333753 [ 0.098641] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 10:41:19.333816 [ 0.099619] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Jun 30 10:41:19.345716 [ 0.100153] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 10:41:19.345776 [ 0.100164] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 10:41:19.357746 [ 0.100800] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 10:41:19.357817 [ 0.100831] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 10:41:19.369771 [ 0.101034] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 10:41:19.369830 [ 0.101387] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 10:41:19.381797 [ 0.101397] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 10:41:19.381859 [ 0.101775] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 10:41:19.393745 [ 0.102067] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 10:41:19.393805 [ 0.102077] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 10:41:19.405749 [ 0.102371] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 10:41:19.405811 [ 0.102487] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 10:41:19.417742 [ 0.102496] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 10:41:19.417804 [ 0.102675] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 10:41:19.417852 [ 0.102891] pps_core: LinuxPPS API ver. 1 registered Jun 30 10:41:19.429781 [ 0.102896] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 10:41:19.441760 [ 0.102912] PTP clock support registered Jun 30 10:41:19.441818 [ 0.104441] NetLabel: Initializing Jun 30 10:41:19.441863 [ 0.104447] NetLabel: domain hash size = 128 Jun 30 10:41:19.453726 [ 0.104453] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Jun 30 10:41:19.453787 [ 0.104508] NetLabel: unlabeled traffic allowed by default Jun 30 10:41:19.465737 [ 0.104679] vgaarb: loaded Jun 30 10:41:19.465793 [ 0.105163] clocksource: Switched to clocksource mct-frc Jun 30 10:41:19.465860 [ 0.105744] VFS: Disk quotas dquot_6.6.0 Jun 30 10:41:19.477752 [ 0.105830] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jun 30 10:41:19.477817 [ 0.106590] AppArmor: AppArmor Filesystem Enabled Jun 30 10:41:19.489781 [ 0.116607] NET: Registered PF_INET protocol family Jun 30 10:41:19.489843 [ 0.116819] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Jun 30 10:41:19.501741 [ 0.118293] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 10:41:19.501811 [ 0.118396] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 10:41:19.513757 [ 0.118421] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Jun 30 10:41:19.525743 [ 0.118522] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Jun 30 10:41:19.525812 [ 0.118752] TCP: Hash tables configured (established 8192 bind 8192) Jun 30 10:41:19.537779 [ 0.118988] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Jun 30 10:41:19.537847 [ 0.119090] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 10:41:19.549786 [ 0.119131] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 10:41:19.549849 [ 0.119352] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 10:41:19.561745 [ 0.119390] NET: Registered PF_XDP protocol family Jun 30 10:41:19.561805 [ 0.119401] PCI: CLS 0 bytes, default 64 Jun 30 10:41:19.573839 [ 0.119925] Trying to unpack rootfs image as initramfs... Jun 30 10:41:19.573900 [ 0.120256] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Jun 30 10:41:19.585747 [ 0.125771] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Jun 30 10:41:19.585815 [ 0.190010] Initialise system trusted keyrings Jun 30 10:41:19.597764 [ 0.190086] Key type blacklist registered Jun 30 10:41:19.597822 [ 0.191306] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Jun 30 10:41:19.609746 [ 0.199211] zbud: loaded Jun 30 10:41:19.609802 [ 0.201457] integrity: Platform Keyring initialized Jun 30 10:41:19.609849 [ 0.201490] integrity: Machine keyring initialized Jun 30 10:41:19.621721 [ 0.201499] Key type asymmetric registered Jun 30 10:41:19.621780 [ 0.201506] Asymmetric key parser 'x509' registered Jun 30 10:41:19.621827 [ 1.422620] Freeing initrd memory: 25120K Jun 30 10:41:19.633748 [ 1.444795] alg: self-tests for CTR-KDF (hmac(sha256)) passed Jun 30 10:41:19.633810 [ 1.445061] bounce: pool size: 64 pages Jun 30 10:41:19.633855 [ 1.445289] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Jun 30 10:41:19.645760 [ 1.445467] io scheduler mq-deadline registered Jun 30 10:41:19.645818 [ 1.450608] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Jun 30 10:41:19.657801 [ 1.471616] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 10:41:19.669709 [ 1.471629] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 10:41:19.681799 [ 1.473983] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 10:41:19.681857 [ 1.473992] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 10:41:19.693750 [ 1.474802] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 10:41:19.705711 [ 1.474811] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 10:41:19.705750 [ 1.475628] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 10:41:19.717891 [ 1.475637] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 10:41:19.729816 [ 1.478021] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 10:41:19.741757 [ 1.480805] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 10:41:19.741822 [ 1.483574] Serial: AMBA driver Jun 30 10:41:19.741867 [ 1.483800] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 10:41:19.753772 [ 1.484275] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 10:41:19.765777 [ 1.484738] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 10:41:19.777745 [ 2.565547] printk: console [ttySAC2] enabled Jun 30 10:41:19.777806 [ 2.570379] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Jun 30 10:41:19.789697 [ 2.581019] STM32 USART driver initialized Jun 30 10:41:19.789756 [ 2.595424] mousedev: PS/2 mouse device common for all mice Jun 30 10:41:19.801712 [ 2.626674] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 10:41:19.837730 [ 2.635301] s5m-rtc s5m-rtc: setting system clock to 2024-06-30T10:41:20 UTC (1719744080) Jun 30 10:41:19.849690 [ 2.645133] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Jun 30 10:41:19.861718 [ 2.652552] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 10:41:19.861780 [ 2.660566] NET: Registered PF_INET6 protocol family Jun 30 10:41:19.873701 [ 2.684613] Segment Routing with IPv6 Jun 30 10:41:19.897766 [ 2.686902] In-situ OAM (IOAM) with IPv6 Jun 30 10:41:19.897824 [ 2.690832] mip6: Mobile IPv6 Jun 30 10:41:19.897867 [ 2.693716] NET: Registered PF_PACKET protocol family Jun 30 10:41:19.909714 [ 2.698842] mpls_gso: MPLS GSO support Jun 30 10:41:19.909772 [ 2.702890] ThumbEE CPU extension supported. Jun 30 10:41:19.909818 [ 2.706707] Registering SWP/SWPB emulation handler Jun 30 10:41:19.921748 [ 2.711960] registered taskstats version 1 Jun 30 10:41:19.921807 [ 2.715608] Loading compiled-in X.509 certificates Jun 30 10:41:19.921855 [ 3.176179] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Jun 30 10:41:20.389779 [ 3.183544] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Jun 30 10:41:20.401772 [ 3.194607] zswap: loaded using pool lzo/zbud Jun 30 10:41:20.401830 [ 3.198520] Key type .fscrypt registered Jun 30 10:41:20.413703 [ 3.201850] Key type fscrypt-provisioning registered Jun 30 10:41:20.413764 [ 3.226175] Key type encrypted registered Jun 30 10:41:20.437776 [ 3.228724] AppArmor: AppArmor sha1 policy hashing enabled Jun 30 10:41:20.437836 [ 3.234250] ima: No TPM chip found, activating TPM-bypass! Jun 30 10:41:20.449736 [ 3.239680] ima: Allocated hash algorithm: sha256 Jun 30 10:41:20.449796 [ 3.244391] ima: No architecture policies found Jun 30 10:41:20.449843 [ 3.248923] evm: Initialising EVM extended attributes: Jun 30 10:41:20.461747 [ 3.253991] evm: security.selinux Jun 30 10:41:20.461803 [ 3.257287] evm: security.SMACK64 (disabled) Jun 30 10:41:20.473737 [ 3.261540] evm: security.SMACK64EXEC (disabled) Jun 30 10:41:20.473799 [ 3.266141] evm: security.SMACK64TRANSMUTE (disabled) Jun 30 10:41:20.473846 [ 3.271174] evm: security.SMACK64MMAP (disabled) Jun 30 10:41:20.485767 [ 3.275775] evm: security.apparmor Jun 30 10:41:20.485824 [ 3.279160] evm: security.ima Jun 30 10:41:20.485867 [ 3.282118] evm: security.capability Jun 30 10:41:20.497691 [ 3.285671] evm: HMAC attrs: 0x1 Jun 30 10:41:20.497755 [ 3.875102] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 10:41:21.085707 [ 3.881074] clk: Disabling unused clocks Jun 30 10:41:21.085769 [ 3.894014] Freeing unused kernel image (initmem) memory: 2048K Jun 30 10:41:21.109743 [ 3.898868] Checked W+X mappings: passed, no W+X pages found Jun 30 10:41:21.109805 [ 3.904129] Run /init as init process Jun 30 10:41:21.109850 Loading, please wait... Jun 30 10:41:21.145695 Starting systemd-udevd version 252.26-1~deb12u2 Jun 30 10:41:21.217726 [ 4.799383] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 10:41:22.009946 [ 4.814445] usbcore: registered new interface driver usbfs Jun 30 10:41:22.021964 [ 4.824245] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 10:41:22.033801 [ 4.836733] usbcore: registered new interface driver hub Jun 30 10:41:22.045755 [ 4.847369] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 10:41:22.057803 [ 4.856607] usbcore: registered new device driver usb Jun 30 10:41:22.069891 [ 4.867956] Synopsys Designware Multimedia Card Interface Driver Jun 30 10:41:22.081756 [ 4.888878] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 30 10:41:22.105754 [ 4.894783] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 30 10:41:22.105818 [ 4.895672] SCSI subsystem initialized Jun 30 10:41:22.105864 [ 4.922880] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 30 10:41:22.129776 [ 4.927923] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 30 10:41:22.141741 [ 4.935434] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo Jun 30 10:41:22.153737 [ 4.935691] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 30 10:41:22.153800 [ 4.947803] mmc_host mmc0: card is polling. Jun 30 10:41:22.165739 [ 4.949900] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 30 10:41:22.165801 [ 4.959502] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo Jun 30 10:41:22.177714 [ 4.979995] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 10:41:22.189715 [ 5.013283] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 10:41:22.225761 [ 5.015173] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 10:41:22.237756 [ 5.046532] phy phy-12130000.phy.2: phy_power_on was called before phy_init Jun 30 10:41:22.261726 [ 5.052169] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 10:41:22.261787 [ 5.061235] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Jun 30 10:41:22.273744 [ 5.063614] phy phy-12130000.phy.2: phy_power_on was called before phy_init Jun 30 10:41:22.285677 [ 5.124718] exynos-ehci 12110000.usb: irq 109, io mem 0x12110000 Jun 30 10:41:22.333713 [ 5.132715] exynos-ohci 12120000.usb: USB Host Controller Jun 30 10:41:22.345676 [ 5.141074] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Jun 30 10:41:22.357750 [ 5.148931] exynos-ohci 12120000.usb: irq 109, io mem 0x12120000 Jun 30 10:41:22.357816 [ 5.153663] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 10:41:22.369751 [ 5.163272] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 10:41:22.369812 [ 5.163354] mmc1: new high speed SDHC card at address aaaa Jun 30 10:41:22.381748 [ 5.178424] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Jun 30 10:41:22.381807 [ 5.182863] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 10:41:22.393764 [ 5.189708] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 10:41:22.405771 [ 5.196922] usb usb1: Product: EHCI Host Controller Jun 30 10:41:22.405830 [ 5.201756] usb usb1: Manufacturer: Linux 6.1.0-22-armmp-lpae ehci_hcd Jun 30 10:41:22.417733 [ 5.208268] usb usb1: SerialNumber: 12110000.usb Jun 30 10:41:22.417793 [ 5.208950] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 30 10:41:22.429752 [ 5.221442] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 30 10:41:22.441736 [ 5.226377] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 30 10:41:22.441804 [ 5.237452] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 30 10:41:22.453797 [ 5.249494] mmc0: new DDR MMC card at address 0001 Jun 30 10:41:22.453856 [ 5.253386] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 30 10:41:22.465833 [ 5.255896] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Jun 30 10:41:22.465892 [ 5.259930] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Jun 30 10:41:22.477822 [ 5.273236] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 30 10:41:22.489747 [ 5.285647] hub 1-0:1.0: USB hub found Jun 30 10:41:22.489804 [ 5.287967] mmcblk0: p1 p2 p3 p4 Jun 30 10:41:22.501719 [ 5.298532] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Jun 30 10:41:22.513707 [ 5.308038] hub 1-0:1.0: 3 ports detected Jun 30 10:41:22.513765 [ 5.316358] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Jun 30 10:41:22.525732 [ 5.323113] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Jun 30 10:41:22.537761 [ 5.323584] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (241:0) Jun 30 10:41:22.537828 [ 5.329971] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 10:41:22.549764 [ 5.343310] usb usb2: Product: USB Host Controller Jun 30 10:41:22.549822 [ 5.348077] usb usb2: Manufacturer: Linux 6.1.0-22-armmp-lpae ohci_hcd Jun 30 10:41:22.561761 [ 5.354586] usb usb2: SerialNumber: 12120000.usb Jun 30 10:41:22.561820 [ 5.396588] scsi host0: ahci-dwc Jun 30 10:41:22.609787 [ 5.398841] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 110 Jun 30 10:41:22.609856 [ 5.452654] hub 2-0:1.0: USB hub found Jun 30 10:41:22.657789 [ 5.455181] hub 2-0:1.0: 3 ports detected Jun 30 10:41:22.669867 [ 5.881232] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 30 10:41:23.089744 [ 5.886807] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 30 10:41:23.101756 [ 5.892654] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 30 10:41:23.101820 [ 5.897888] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 10:41:23.113806 [ 5.909424] ata1.00: configured for UDMA/133 Jun 30 10:41:23.113863 [ 5.913311] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 30 10:41:23.125741 [ 5.970192] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 10:41:23.185761 [ 6.001108] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 10:41:23.209729 [ 6.005227] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 10:41:23.221786 [ 6.013807] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Jun 30 10:41:23.233757 [ 6.022253] xhci-hcd xhci-hcd.2.auto: irq 111, io mem 0x12000000 Jun 30 10:41:23.233819 [ 6.028432] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 10:41:23.245729 [ 6.033671] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 10:41:23.245799 [ 6.042051] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 10:41:23.257746 [ 6.048630] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 10:41:23.257816 [ 6.056043] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 10:41:23.269752 [ 6.056969] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 30 10:41:23.281764 [ 6.063218] usb usb3: Product: xHCI Host Controller Jun 30 10:41:23.281823 [ 6.063226] usb usb3: Manufacturer: Linux 6.1.0-22-armmp-lpae xhci-hcd Jun 30 10:41:23.293744 [ 6.070677] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 30 10:41:23.293805 [ 6.075534] usb usb3: SerialNumber: xhci-hcd.2.auto Jun 30 10:41:23.293852 [ 6.082141] I/O error, dev mmcblk1, sector 7744000 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 2 Jun 30 10:41:23.305763 [ 6.091105] hub 3-0:1.0: USB hub found Jun 30 10:41:23.305838 [ 6.101587] sd 0:0:0:0: [sda] Write Protect is off Jun 30 10:41:23.317748 [ 6.105264] hub 3-0:1.0: 1 port detected Jun 30 10:41:23.317805 [ 6.113990] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 30 10:41:23.329748 [ 6.115187] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 10:41:23.341786 [ 6.131097] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 30 10:41:23.341848 [ 6.131159] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Jun 30 10:41:23.353778 [ 6.145524] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 10:41:23.353844 [ 6.152708] usb usb4: Product: xHCI Host Controller Jun 30 10:41:23.365751 [ 6.157568] usb usb4: Manufacturer: Linux 6.1.0-22-armmp-lpae xhci-hcd Jun 30 10:41:23.365815 [ 6.161641] sda: sda1 sda2 < sda5 > Jun 30 10:41:23.377746 [ 6.164069] usb usb4: SerialNumber: xhci-hcd.2.auto Jun 30 10:41:23.377807 [ 6.170695] sd 0:0:0:0: [sda] Attached SCSI disk Jun 30 10:41:23.377853 [ 6.177603] hub 4-0:1.0: USB hub found Jun 30 10:41:23.389736 [ 6.181807] hub 4-0:1.0: 1 port detected Jun 30 10:41:23.389793 [ 6.192224] I/O error, dev mmcblk1, sector 7744001 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 2 Jun 30 10:41:23.401761 [ 6.300297] I/O error, dev mmcblk1, sector 7744002 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 2 Jun 30 10:41:23.509751 [ 6.408384] I/O error, dev mmcblk1, sector 7744003 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 2 Jun 30 10:41:23.617705 [ 6.516431] I/O error, dev mmcblk1, sector 7744004 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 2 Jun 30 10:41:23.725706 [ 6.624514] I/O error, dev mmcblk1, sector 7744005 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 2 Jun 30 10:41:23.833708 [ 6.732556] I/O error, dev mmcblk1, sector 7744006 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 2 Jun 30 10:41:23.941697 [ 6.840596] I/O error, dev mmcblk1, sector 7744007 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 2 Jun 30 10:41:24.049705 [ 6.948648] I/O error, dev mmcblk1, sector 7744008 op 0x0:(READ) flags 0x80700 phys_seg 13 prio class 2 Jun 30 10:41:24.157667 [ 7.056692] I/O error, dev mmcblk1, sector 7744009 op 0x0:(READ) flags 0x80700 phys_seg 13 prio class 2 Jun 30 10:41:24.265671 [ 7.153185] random: crng init done Jun 30 10:41:24.361690 [ 7.262183] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. Jun 30 10:41:24.481736 [ 7.273094] device-mapper: uevent: version 1.0.3 Jun 30 10:41:24.481795 [ 7.281233] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Jun 30 10:41:24.493738 [ 10.028888] Buffer I/O error on dev mmcblk1, logical block 968000, async page read Jun 30 10:41:27.241728 Begin: Loading essential drivers ... done. Jun 30 10:41:27.301676 Begin: Running /scripts/init-premount ... done. Jun 30 10:41:30.313677 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 30 10:41:30.313730 Begin: Running /scripts/local-premount ... done. Jun 30 10:41:30.373609 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 30 10:41:30.409611 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 30 10:41:30.505731 /dev/mapper/arndale--metrocentre--vg-root: clean, 39331/1220608 files, 378004/4882432 blocks Jun 30 10:41:30.769714 done. Jun 30 10:41:30.781660 [ 13.693335] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 30 10:41:30.901750 [ 13.980933] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. Jun 30 10:41:31.189652 done. Jun 30 10:41:31.189652 Begin: Running /scripts/local-bottom ... done. Jun 30 10:41:31.237635 Begin: Running /scripts/init-bottom ... done. Jun 30 10:41:31.297598 [ 14.312562] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. Jun 30 10:41:31.525737 INIT: version 3.06 booting Jun 30 10:41:31.817695 INIT: No inittab.d directory found Jun 30 10:41:31.933581 Using makefile-style concurrent boot in runlevel S. Jun 30 10:41:32.257703 Starting hotplug events dispatcher: systemd-udevd. Jun 30 10:41:33.997721 Synthesizing the initial hotplug events (subsystems)...done. Jun 30 10:41:34.241713 Synthesizing the initial hotplug events (devices)...done. Jun 30 10:41:34.781718 Waiting for /dev to be fully populated...[ 17.783363] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 10:41:34.997686 [ 17.881736] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 30 10:41:35.093837 [ 17.939935] panfrost 11800000.gpu: clock rate = 533000000 Jun 30 10:41:35.153710 [ 18.011720] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jun 30 10:41:35.225639 [ 18.106152] panfrost 11800000.gpu: mali-t600 id 0x600 major 0x0 minor 0x0 status 0x1 Jun 30 10:41:35.321748 [ 18.112466] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,31b4dfff Jun 30 10:41:35.321828 [ 18.120647] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 Jun 30 10:41:35.333730 [ 18.132350] panfrost 11800000.gpu: shader_present=0xf l2_present=0x1 Jun 30 10:41:35.345719 [ 18.143604] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 0 Jun 30 10:41:35.357700 [ 18.233203] usb3503 usb-hub: switched to HUB mode Jun 30 10:41:35.441735 [ 18.236449] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 10:41:35.453644 [ 18.265025] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 10:41:35.477718 [ 18.334728] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 10:41:35.549774 [ 18.473277] blk_print_req_error: 26 callbacks suppressed Jun 30 10:41:35.681730 [ 18.473355] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 10:41:35.693704 [ 18.560752] usb 1-3: new high-speed USB device number 2 using exynos-ehci Jun 30 10:41:35.777645 [ 18.589594] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 10:41:35.801720 [ 18.698036] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 10:41:35.909921 [ 18.736090] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Jun 30 10:41:35.945747 [ 18.743165] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jun 30 10:41:35.957709 [ 18.759230] hub 1-3:1.0: USB hub found Jun 30 10:41:35.969689 [ 18.777447] hub 1-3:1.0: 3 ports detected Jun 30 10:41:35.981623 [ 18.806353] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 10:41:36.017712 [ 18.940006] exynos4-fb 14400000.fimd: deferred probe timeout, ignoring dependency Jun 30 10:41:36.149652 [ 18.950670] exynos-mixer 14450000.mixer: deferred probe timeout, ignoring dependency Jun 30 10:41:36.161662 [ 18.959030] I/O error, dev mmcblk1, sector 7743712 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 2 Jun 30 10:41:36.173629 [ 19.009776] OF: graph: no port node found in /soc/hdmi@14530000 Jun 30 10:41:36.221656 [ 19.019310] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations Jun 30 10:41:36.233713 [ 19.025582] exynos-drm exynos-drm: bound 14400000.fimd (ops fimd_component_ops [exynosdrm]) Jun 30 10:41:36.245644 [ 19.034362] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops [exynosdrm]) Jun 30 10:41:36.245675 [ 19.045256] exynos-drm exynos-drm: bound 14500000.dsi (ops exynos_dsi_component_ops [exynosdrm]) Jun 30 10:41:36.257721 [ 19.052934] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_component_ops [exynosdrm]) Jun 30 10:41:36.269723 [ 19.061687] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Jun 30 10:41:36.269802 [ 19.068065] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Jun 30 10:41:36.281665 [ 19.077108] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 Jun 30 10:41:36.293654 [ 19.079185] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Jun 30 10:41:36.293744 [ 19.211302] usb 1-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=77.32 Jun 30 10:41:36.425737 [ 19.218449] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Jun 30 10:41:36.425821 [ 19.225661] usb 1-3.2: Product: USB2.0 Hub Jun 30 10:41:36.437721 [ 19.234906] hub 1-3.2:1.0: USB hub found Jun 30 10:41:36.437721 [ 19.242185] hub 1-3.2:1.0: 4 ports detected Jun 30 10:41:36.449678 [ 19.265312] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 10:41:36.473728 [ 19.347939] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 10:41:36.557739 [ 19.462524] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 10:41:36.677739 [ 19.541201] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 30 10:41:36.749739 [ 19.570192] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 10:41:36.785646 [ 19.654475] usb 1-3.2.4: New USB device found, idVendor=0b95, idProduct=772a, bcdDevice= 0.01 Jun 30 10:41:36.869834 [ 19.661654] usb 1-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 30 10:41:36.869902 [ 19.669022] usb 1-3.2.4: Product: AX88772 Jun 30 10:41:36.881744 [ 19.673106] usb 1-3.2.4: Manufacturer: ASIX Elec. Corp. Jun 30 10:41:36.881804 [ 19.678410] usb 1-3.2.4: SerialNumber: 000001 Jun 30 10:41:36.893729 [ 19.682725] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 10:41:36.893801 [ 19.791955] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 10:41:37.001850 [ 19.799657] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 10:41:37.013714 [ 20.247799] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 30 10:41:37.457724 [ 20.919927] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 10:41:38.141738 [ 20.935475] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Jun 30 10:41:38.153724 [ 20.947261] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 3a:0b:6e:c5:bf:ac Jun 30 10:41:38.165730 [ 20.957929] usbcore: registered new interface driver asix Jun 30 10:41:38.165730 done. Jun 30 10:41:38.417676 [ 21.695247] EXT4-fs (dm-0): re-mounted. Quota mode: none. Jun 30 10:41:38.909668 Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). Jun 30 10:41:38.945777 Checking file systems.../dev/sda1: clean, 922/61056 files, 25375/243968 blocks Jun 30 10:41:40.577715 done. Jun 30 10:41:40.637697 Cleaning up temporary files... /tmp. Jun 30 10:41:40.925730 [ 23.918722] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 30 10:41:41.129694 [ 23.970647] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Jun 30 10:41:41.177753 [ 24.187012] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k FS Jun 30 10:41:41.405687 Mounting local filesystems...done. Jun 30 10:41:41.765653 Activating swapfile swap, if any...done. Jun 30 10:41:41.777682 Cleaning up temporary files.... Jun 30 10:41:41.849693 Starting Setting kernel variables: sysctl. Jun 30 10:41:42.053707 [ 25.470752] audit: type=1400 audit(1719744102.828:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=902 comm="apparmor_parser" Jun 30 10:41:42.693767 [ 25.489221] audit: type=1400 audit(1719744102.832:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=902 comm="apparmor_parser" Jun 30 10:41:42.705754 [ 25.536592] audit: type=1400 audit(1719744102.892:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=901 comm="apparmor_parser" Jun 30 10:41:42.753732 [ 25.717470] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Jun 30 10:41:42.933591 [ 25.895856] audit: type=1400 audit(1719744103.252:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=943 comm="apparmor_parser" Jun 30 10:41:43.113744 [ 25.915234] audit: type=1400 audit(1719744103.268:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=943 comm="apparmor_parser" Jun 30 10:41:43.137686 [ 25.928693] audit: type=1400 audit(1719744103.272:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=943 comm="apparmor_parser" Jun 30 10:41:43.149727 [ 26.172442] audit: type=1400 audit(1719744103.528:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=937 comm="apparmor_parser" Jun 30 10:41:43.389952 [ 26.193323] audit: type=1400 audit(1719744103.528:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=937 comm="apparmor_parser" Jun 30 10:41:43.413662 [ 26.209196] audit: type=1400 audit(1719744103.528:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=937 comm="apparmor_parser" Jun 30 10:41:43.437674 [ 26.226700] audit: type=1400 audit(1719744103.528:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=937 comm="apparmor_parser" Jun 30 10:41:43.449634 Starting: AppArmorLoading AppArmor profiles...done. Jun 30 10:41:43.509629 . Jun 30 10:41:43.509629 [ 27.878737] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 30 10:41:45.093709 [ 27.884782] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jun 30 10:41:45.093709 Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1 Jun 30 10:41:46.605727 Copyright 2004-2022 Internet Systems Consortium. Jun 30 10:41:46.605770 All rights reserved. Jun 30 10:41:46.617671 For info, please visit https://www.isc.org/software/dhcp/ Jun 30 10:41:46.617705 Jun 30 10:41:46.617726 Listening on LPF/eth0/9e:04:00:59:64:5a Jun 30 10:41:46.617750 Sending on LPF/eth0/9e:04:00:59:64:5a Jun 30 10:41:46.629672 Sending on Socket/fallback Jun 30 10:41:46.629703 Created duid "\000\001\000\001.\023\362\347\236\004\000YdZ". Jun 30 10:41:46.629730 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 Jun 30 10:41:46.641673 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 Jun 30 10:41:46.641706 DHCPOFFER of 10.149.64.44 from 10.149.64.4 Jun 30 10:41:46.641731 DHCPREQUEST for 10.149.64.44 on eth0 to 255.255.255.255 port 67 Jun 30 10:41:46.653802 DHCPACK of 10.149.64.44 from 10.149.64.4 Jun 30 10:41:46.653864 bound to 10.149.64.44 -- renewal in 259 seconds. Jun 30 10:41:46.653912 done. Jun 30 10:41:46.665687 Cleaning up temporary files.... Jun 30 10:41:46.737808 Starting nftables: none Jun 30 10:41:46.869697 . Jun 30 10:41:47.301691 INIT: Entering runlevel: 2 Jun 30 10:41:47.373680 Using makefile-style concurrent boot in runlevel 2. Jun 30 10:41:47.421791 Starting Apache httpd web server: apache2. Jun 30 10:41:49.512681 Starting periodic command scheduler: cron. Jun 30 10:41:49.860514 Starting NTP server: ntpd2024-06-30T10:41:50 ntpd[1134]: INIT: ntpd ntpsec-1.2.2: Starting Jun 30 10:41:49.953774 2024-06-30T10:41:50 ntpd[1134]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 30 10:41:49.965817 . Jun 30 10:41:49.965868 Starting system message bus: dbus. Jun 30 10:41:50.229713 Starting OpenBSD Secure Shell server: sshd. Jun 30 10:41:50.952539 Jun 30 10:41:52.020402 Debian GNU/Linux 12 arndale-metrocentre ttySAC2 Jun 30 10:41:52.020402 Jun 30 10:41:52.020402 arndale-metrocentre login: INIT: Switching to r INIT: No initUsing makefile-style concurrent boot in runlevel 6. Jun 30 10:47:04.117769 Stopping SMP IRQ Balancer: irqbalance. Jun 30 10:47:04.177741 Stopping nftables: none. Jun 30 10:47:04.189716 Stopping hotplug events dispatcher: systemd-udevd. Jun 30 10:47:04.213767 Saving the system clock to /dev/rtc0. Jun 30 10:47:04.945766 Hardware Clock updated to Sun Jun 30 10:47:05 UTC 2024. Jun 30 10:47:04.945864 Stopping Apache httpd web server: apache2. Jun 30 10:47:05.341694 Asking all remaining processes to terminate...done. Jun 30 10:47:05.593744 All processes ended within 1 seconds...done. Jun 30 10:47:05.593805 Deconfiguring network interfaces...ifdown: ignoring unknown interface eth0=eth0 Jun 30 10:47:05.761760 done. Jun 30 10:47:05.761841 [ 348.796927] EXT4-fs (sda1): unmounting filesystem. Jun 30 10:47:06.001766 Deactivating swap...done. Jun 30 10:47:06.073716 Unmounting local filesystems...done. Jun 30 10:47:06.073776 [ 349.167298] EXT4-fs (dm-0): re-mounted. Quota mode: none. Jun 30 10:47:06.373751 Will now restart. Jun 30 10:47:06.673736 [ 349.520333] asix 1-3.2.4:1.0 eth0: Link is Down Jun 30 10:47:06.721662 [ 349.586203] sd 0:0:0:0: [sda] Synchronizing SCSI cache Jun 30 10:47:06.793769 [ 349.594058] wake enabled for irq 101 (gpx1-4) Jun 30 10:47:06.793831 [ 349.596941] wake enabled for irq 102 (gpx1-5) Jun 30 10:47:06.805816 [ 349.601301] wake enabled for irq 103 (gpx1-6) Jun 30 10:47:06.805877 [ 349.605636] wake enabled for irq 104 (gpx1-7) Jun 30 10:47:06.805973 [ 349.609976] wake enabled for irq 105 (gpx2-0) Jun 30 10:47:06.817755 [ 349.614316] wake enabled for irq 106 (gpx2-1) Jun 30 10:47:06.817816 [ 349.619177] reboot: Reű Jun 30 10:47:07.153761 Jun 30 10:47:07.153814 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 10:47:07.165806 Jun 30 10:47:07.165858 CPU: Exynos5250@1000MHz Jun 30 10:47:07.165903 Jun 30 10:47:07.165940 Board: Arndale Jun 30 10:47:07.165981 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 10:47:07.166029 ready Jun 30 10:47:07.166068 DRAM: 2 GiB Jun 30 10:47:07.166107 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 10:47:07.189763 trace: enabled Jun 30 10:47:07.225754 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 10:47:07.585669 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 10:47:07.645807 In: serial Jun 30 10:47:07.645862 Out: serial Jun 30 10:47:07.645903 Err: serial Jun 30 10:47:07.645943 SCSI: ARNDALE SCSI INIT Jun 30 10:47:07.645985 Target spinup took 0 ms. Jun 30 10:47:07.657812 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 10:47:07.657875 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 10:47:07.669771 Net: Net Initialization Skipped Jun 30 10:47:07.669829 No ethernet found. Jun 30 10:47:07.669871 Hostname: arndale-metrocentre Jun 30 10:47:07.669915 Hit any key to stop autoboot: 2  1  0 Jun 30 10:47:09.601792 (Re)start USB... Jun 30 10:47:09.601855 USB0: USB EHCI 1.00 Jun 30 10:47:09.601898 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 10:47:15.205839 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 10:47:15.205922 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 10:47:15.649661 Waiting for Ethernet connection... done. Jun 30 10:47:17.293755 BOOTP broadcast 1 Jun 30 10:47:17.305685 BOOTP broadcast 2 Jun 30 10:47:20.521840 DHCP client bound to address 10.149.64.44 (3355 ms) Jun 30 10:47:20.540886 Using asx0 device Jun 30 10:47:20.540958 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 10:47:20.541069 Filename 'pxelinux.0'. Jun 30 10:47:20.541113 Load address: 0x43e00000 Jun 30 10:47:20.541187 Loading: *### Jun 30 10:47:20.545675 2.4 MiB/s Jun 30 10:47:20.545727 done Jun 30 10:47:20.557741 Bytes transferred = 42430 (a5be hex) Jun 30 10:47:20.557915 missing environment variable: pxeuuid Jun 30 10:47:20.557967 Retrieving file: pxelinux.cfg/0A95402C Jun 30 10:47:20.558012 Using asx0 device Jun 30 10:47:20.558051 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 10:47:20.569769 Filename 'pxelinux.cfg/0A95402C'. Jun 30 10:47:20.569826 Load address: 0x51000000 Jun 30 10:47:20.569868 Loading: *# Jun 30 10:47:20.569907 31.3 KiB/s Jun 30 10:47:20.581779 done Jun 30 10:47:20.581830 Bytes transferred = 65 (41 hex) Jun 30 10:47:20.581875 Config file found Jun 30 10:47:20.581915 Ignoring unknown command: serial Jun 30 10:47:20.581957 1: local Jun 30 10:47:20.581995 scanning bus for devices... Jun 30 10:47:20.593687 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 10:47:20.617746 Type: Hard Disk Jun 30 10:47:20.617801 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 10:47:20.629770 Found 1 device(s). Jun 30 10:47:20.629824 Jun 30 10:47:20.629863 SCSI device 0: Jun 30 10:47:20.629902 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 10:47:20.641807 Type: Hard Disk Jun 30 10:47:20.641863 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 10:47:20.641911 ... is now current device Jun 30 10:47:20.653686 Scanning scsi 0... Jun 30 10:47:20.653740 Found U-Boot script /boot.scr Jun 30 10:47:20.833687 1768 bytes read in 46 ms (37.1 KiB/s) Jun 30 10:47:20.881815 ## Executing script at 50000000 Jun 30 10:47:20.881870 Loading dtbs/6.10.0-rc5+/exynos5250-arndale.dtb Jun 30 10:47:20.881917 46641 bytes read in 3724 ms (11.7 KiB/s) Jun 30 10:47:24.481721 983052 bytes read in 105 ms (8.9 MiB/s) Jun 30 10:47:24.601716 Loaded xen-4.19-unstable to 0x41000000 (f000c) Jun 30 10:47:24.613768 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan Jun 30 10:47:24.625709 10785280 bytes read in 507 ms (20.3 MiB/s) Jun 30 10:47:25.129672 Loaded vmlinuz-6.10.0-rc5+ to 0x42000000 (a49200) Jun 30 10:47:25.129709 command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 10:47:25.153612 12142342 bytes read in 577 ms (20.1 MiB/s) Jun 30 10:47:25.724573 Loaded initrd.img-6.10.0-rc5+ to 0x43300000 (b94706) Jun 30 10:47:25.736591 chosen { Jun 30 10:47:25.736591 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan"; Jun 30 10:47:25.748595 #size-cells = <0x00000001>; Jun 30 10:47:25.748595 #address-cells = <0x00000001>; Jun 30 10:47:25.760596 stdout-path = "serial2:115200n8"; Jun 30 10:47:25.760596 module@1 { Jun 30 10:47:25.760596 reg = <0x43300000 0x00b94706>; Jun 30 10:47:25.760596 compatible = "xen,linux-initrd", "xen,multiboot-module"; Jun 30 10:47:25.772759 }; Jun 30 10:47:25.772823 module@0 { Jun 30 10:47:25.772865 bootargs = "ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Jun 30 10:47:25.784532 reg = <0x42000000 0x00a49200>; Jun 30 10:47:25.784532 compatible = "xen,linux-zimage", "xen,multiboot-module"; Jun 30 10:47:25.796623 }; Jun 30 10:47:25.796623 }; Jun 30 10:47:25.796623 Booting 0x41000000 - 0x43000000 Jun 30 10:47:25.796623 Kernel image @ 0x41000000 [ 0x000000 - 0x12f000 ] Jun 30 10:47:25.796623 ## Flattened Device Tree blob at 43000000 Jun 30 10:47:25.808600 Booting using the fdt blob at 0x43000000 Jun 30 10:47:25.808600 reserving fdt memory region: addr=43000000 size=c000 Jun 30 10:47:25.808600 Loading Device Tree to 4fff1000, end 4fffffff ... OK Jun 30 10:47:25.820547 Jun 30 10:47:25.820547 Starting kernel ...(fake run for tracing) Jun 30 10:47:25.832504 Jun 30 10:47:25.832504 Jun 30 10:47:25.832504 Starting kernel ... Jun 30 10:47:25.832504 Jun 30 10:47:25.832504 __ __ _ _ _ ___ _ _ _ Jun 30 10:47:25.880595 \ \/ /___ _ __ | || | / |/ _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Jun 30 10:47:25.892604 \ // _ \ '_ \ | || |_ | | (_) |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Jun 30 10:47:25.892604 / \ __/ | | | |__ _|| |\__, |__| |_| | | | \__ \ || (_| | |_) | | __/ Jun 30 10:47:25.904598 /_/\_\___|_| |_| |_|(_)_| /_/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Jun 30 10:47:25.904598 Jun 30 10:47:25.904598 (XEN) Xen version 4.19-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Sun Jun 30 09:16:28 UTC 2024 Jun 30 10:47:25.916599 (XEN) Latest ChangeSet: Wed Jun 26 16:07:30 2024 +0100 git:08f9b1dd9c Jun 30 10:47:25.928612 (XEN) build-id: 49321b95d54bf04a04497dcfff6064128f8c8a55 Jun 30 10:47:25.928612 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Jun 30 10:47:25.940606 (XEN) 32-bit Execution: Jun 30 10:47:25.940606 (XEN) Processor Features: 00001031:00011011 Jun 30 10:47:25.940606 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Jun 30 10:47:25.952619 (XEN) Extensions: GenericTimer Security Jun 30 10:47:25.952619 (XEN) Debug Features: 02010555 Jun 30 10:47:25.952619 (XEN) Auxiliary Features: 00000000 Jun 30 10:47:25.964601 (XEN) Memory Model Features: 10201105 20000000 Jun 30 10:47:25.964601 (XEN) 01240000 02102211 Jun 30 10:47:25.964601 (XEN) ISA Features: 02101110 13112111 21232041 Jun 30 10:47:25.976571 (XEN) 11112131 10011142 00000000 Jun 30 10:47:25.976571 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Jun 30 10:47:25.988532 (XEN) Set SYSRAM to 0000000041000074 (00200074) Jun 30 10:47:25.988532 (XEN) SMP: Allowing 2 CPUs Jun 30 10:47:26.000581 (XEN) enabled workaround for: ARM erratum 766422 Jun 30 10:47:26.000581 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Jun 30 10:47:26.000581 (XEN) GICv2 initialization: Jun 30 10:47:26.012598 (XEN) gic_dist_addr=0000000010481000 Jun 30 10:47:26.012598 (XEN) gic_cpu_addr=0000000010482000 Jun 30 10:47:26.012598 (XEN) gic_hyp_addr=0000000010484000 Jun 30 10:47:26.024595 (XEN) gic_vcpu_addr=0000000010486000 Jun 30 10:47:26.024595 (XEN) gic_maintenance_irq=25 Jun 30 10:47:26.024595 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Jun 30 10:47:26.036599 (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2) Jun 30 10:47:26.036599 (XEN) Initializing Credit2 scheduler Jun 30 10:47:26.036599 (XEN) load_precision_shift: 18 Jun 30 10:47:26.048602 (XEN) load_window_shift: 30 Jun 30 10:47:26.048602 (XEN) underload_balance_tolerance: 0 Jun 30 10:47:26.048602 (XEN) overload_balance_tolerance: -3 Jun 30 10:47:26.048602 (XEN) runqueues arrangement: socket Jun 30 10:47:26.060610 (XEN) cap enforcement granularity: 10ms Jun 30 10:47:26.060610 (XEN) load tracking window length 1073741824 ns Jun 30 10:47:26.060610 (XEN) Allocated console ring of 16 KiB. Jun 30 10:47:26.072606 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Jun 30 10:47:26.072606 (XEN) CPU0: Guest atomics will try 2 times before pausing the domain Jun 30 10:47:26.084596 (XEN) Bringing up CPU1 Jun 30 10:47:26.084596 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Jun 30 10:47:26.084596 (XEN) Brought up 2 CPUs Jun 30 10:47:26.084596 (XEN) CPU 1 booted. Jun 30 10:47:26.096558 (XEN) I/O virtualisation disabled Jun 30 10:47:26.096558 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Jun 30 10:47:26.096810 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Jun 30 10:47:26.108590 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Jun 30 10:47:26.108590 (XEN) Initializing Credit2 scheduler Jun 30 10:47:26.108590 (XEN) load_precision_shift: 18 Jun 30 10:47:26.120685 (XEN) load_window_shift: 30 Jun 30 10:47:26.120685 (XEN) underload_balance_tolerance: 0 Jun 30 10:47:26.120685 (XEN) overload_balance_tolerance: -3 Jun 30 10:47:26.120685 (XEN) runqueues arrangement: socket Jun 30 10:47:26.132538 (XEN) cap enforcement granularity: 10ms Jun 30 10:47:26.132538 (XEN) load tracking window length 1073741824 ns Jun 30 10:47:26.132538 (XEN) Adding cpu 0 to runqueue 0 Jun 30 10:47:26.144565 (XEN) First cpu on runqueue, activating Jun 30 10:47:26.144565 (XEN) Adding cpu 1 to runqueue 0 Jun 30 10:47:26.144565 (XEN) alternatives: Patching with alt table 002c2f84 -> 002c305c Jun 30 10:47:26.156614 (XEN) CPU0 will execute ICIALLU on guest exit Jun 30 10:47:26.156614 (XEN) CPU1 will execute ICIALLU on guest exit Jun 30 10:47:26.156614 (XEN) *** LOADING DOMAIN 0 *** Jun 30 10:47:26.168602 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Jun 30 10:47:26.168602 (XEN) Loading ramdisk from boot module @ 0000000043300000 Jun 30 10:47:26.168602 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Jun 30 10:47:26.180555 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Jun 30 10:47:26.736553 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Jun 30 10:47:26.748552 (XEN) Allocating PPI 16 for event channel interrupt Jun 30 10:47:26.772519 (XEN) d0: extended regions not supported for 32-bit guests Jun 30 10:47:26.784679 (XEN) Loading zImage from 0000000042000000 to 0000000067400000-0000000067e49200 Jun 30 10:47:26.784679 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d94706 Jun 30 10:47:26.880582 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b499 Jun 30 10:47:26.988621 (XEN) Initial low memory virq threshold set at 0x4000 pages. Jun 30 10:47:26.988621 (XEN) Scrubbing Free RAM in background Jun 30 10:47:26.988621 (XEN) Std. Loglevel: All Jun 30 10:47:27.000615 (XEN) Guest Loglevel: All Jun 30 10:47:27.000615 (XEN) *************************************************** Jun 30 10:47:27.000615 (XEN) WARNING: SILO mode is not enabled. Jun 30 10:47:27.012599 (XEN) It has implications on the security of the system, Jun 30 10:47:27.012599 (XEN) unless the communications have been forbidden between Jun 30 10:47:27.012599 (XEN) untrusted domains. Jun 30 10:47:27.024563 (XEN) *************************************************** Jun 30 10:47:27.024563 (XEN) 3... 2... 1... Jun 30 10:47:30.028599 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 30 10:47:30.028599 (XEN) Freed 352kB init memory. Jun 30 10:47:30.040678 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 10:47:31.164712 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Jun 30 10:47:31.188552 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Jun 30 10:47:31.188552 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Jun 30 10:47:31.200600 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Jun 30 10:47:31.200600 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 10:47:31.212540 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 10:47:31.248530 [ 0.000000] Linux version 6.10.0-rc5+ (osstest@himrod1) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Sun Jun 30 08:10:22 UTC 2024 Jun 30 10:47:31.260597 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 30 10:47:31.272600 [ 0.000000] CPU: div instructions available: patching division code Jun 30 10:47:31.284593 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 10:47:31.284593 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 10:47:31.296584 [ 0.000000] Memory policy: Data cache writealloc Jun 30 10:47:31.296584 [ 0.000000] Xen 4.19 support found Jun 30 10:47:31.296584 [ 0.000000] efi: UEFI not found. Jun 30 10:47:31.308549 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 on node -1 Jun 30 10:47:31.308549 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 10:47:31.320593 [ 0.000000] Zone ranges: Jun 30 10:47:31.320593 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Jun 30 10:47:31.320593 [ 0.000000] Normal empty Jun 30 10:47:31.332555 [ 0.000000] HighMem empty Jun 30 10:47:31.332555 [ 0.000000] Movable zone start for each node Jun 30 10:47:31.332555 [ 0.000000] Early memory node ranges Jun 30 10:47:31.332555 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Jun 30 10:47:31.344645 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Jun 30 10:47:31.356596 [ 0.000000] psci: probing for conduit method from DT. Jun 30 10:47:31.356596 [ 0.000000] psci: PSCIv1.1 detected in firmware. Jun 30 10:47:31.356596 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Jun 30 10:47:31.368605 [ 0.000000] psci: Trusted OS migration not required Jun 30 10:47:31.368605 [ 0.000000] psci: SMC Calling Convention v1.2 Jun 30 10:47:31.380559 [ 0.000000] percpu: Embedded 18 pages/cpu s41428 r8192 d24108 u73728 Jun 30 10:47:31.380559 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 10:47:31.404592 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 10:47:31.404592 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Jun 30 10:47:31.416591 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 131072 Jun 30 10:47:31.416591 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Jun 30 10:47:31.428567 [ 0.000000] Memory: 414600K/524288K available (15360K kernel code, 2268K rwdata, 6084K rodata, 2048K init, 439K bss, 44152K reserved, 65536K cma-reserved, 0K highmem) Jun 30 10:47:31.440602 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 10:47:31.452558 [ 0.000000] trace event string verifier disabled Jun 30 10:47:31.452558 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 10:47:31.468626 [ 0.000000] rcu: RCU event tracing is enabled. Jun 30 10:47:31.468626 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Jun 30 10:47:31.468626 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Jun 30 10:47:31.480519 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 10:47:31.480519 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 10:47:31.492597 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 10:47:31.504765 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 10:47:31.504853 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Jun 30 10:47:31.516598 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 10:47:31.516598 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 10:47:31.528603 [ 0.000013] Switching to timer-based delay loop, resolution 41ns Jun 30 10:47:31.540567 [ 0.000522] Console: colour dummy device 80x30 Jun 30 10:47:31.540567 [ 0.000541] printk: legacy console [hvc0] enabled Jun 30 10:47:31.540567 [ 0.299537] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Jun 30 10:47:31.552528 [ 0.309936] CPU: Testing write buffer coherency: ok Jun 30 10:47:31.564599 [ 0.314878] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 10:47:31.564599 [ 0.324431] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 10:47:31.576593 [ 0.330863] pid_max: default: 32768 minimum: 301 Jun 30 10:47:31.576593 [ 0.335629] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 10:47:31.588613 [ 0.342912] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 10:47:31.600734 [ 0.351328] /cpus/cpu@0 missing clock-frequency property Jun 30 10:47:31.600796 [ 0.356115] /cpus/cpu@1 missing clock-frequency property Jun 30 10:47:31.612651 [ 0.361533] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 10:47:31.612651 [ 0.368227] xen:grant_table: Grant tables using version 1 layout Jun 30 10:47:31.624598 [ 0.373365] Grant table initialized Jun 30 10:47:31.624598 [ 0.376920] xen:events: Using FIFO-based ABI Jun 30 10:47:31.624598 [ 0.381219] Xen: initializing cpu0 Jun 30 10:47:31.624598 [ 0.384742] Setting up static identity map for 0x60300000 - 0x603000ac Jun 30 10:47:31.636624 [ 0.392531] rcu: Hierarchical SRCU implementation. Jun 30 10:47:31.636624 [ 0.396136] rcu: Max phase no-delay instances is 1000. Jun 30 10:47:31.648608 [ 0.404373] EFI services will not be available. Jun 30 10:47:31.648608 [ 0.407692] smp: Bringing up secondary CPUs ... Jun 30 10:47:31.660546 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 10:47:31.732603 [ 0.481988] Xen: initializing cpu1 Jun 30 10:47:31.732603 [ 0.482148] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 10:47:31.732603 [ 0.482172] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 10:47:31.744602 [ 0.501142] smp: Brought up 1 node, 2 CPUs Jun 30 10:47:31.744602 [ 0.504801] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 10:47:31.756566 [ 0.511088] CPU: All CPU(s) started in SVC mode. Jun 30 10:47:31.756566 [ 0.517011] devtmpfs: initialized Jun 30 10:47:31.768493 [ 0.529366] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 10:47:31.780590 [ 0.535921] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Jun 30 10:47:31.792546 [ 0.545595] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 10:47:31.792546 [ 0.553511] pinctrl core: initialized pinctrl subsystem Jun 30 10:47:31.804594 [ 0.560108] DMI not present or invalid. Jun 30 10:47:31.804594 [ 0.563626] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 10:47:31.816589 [ 0.570233] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 10:47:31.816589 [ 0.579566] thermal_sys: Registered thermal governor 'step_wise' Jun 30 10:47:31.828564 [ 0.579724] software IO TLB: area num 2. Jun 30 10:47:31.828564 [ 0.588398] software IO TLB: only able to allocate 8 MB Jun 30 10:47:31.840592 [ 0.595471] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Jun 30 10:47:31.840592 [ 0.600672] No ATAGs? Jun 30 10:47:31.852555 [ 0.602975] hw-breakpoint: Failed to enable monitor mode on CPU 0. Jun 30 10:47:31.852555 [ 0.611677] Serial: AMBA PL011 UART driver Jun 30 10:47:31.864498 [ 0.658309] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 65 Jun 30 10:47:31.912556 [ 0.686739] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 30 10:47:31.936575 [ 0.710666] xen:balloon: Initialising balloon driver Jun 30 10:47:31.960614 [ 0.717120] iommu: Default domain type: Translated Jun 30 10:47:31.960614 [ 0.720533] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 10:47:31.972589 [ 0.729316] SCSI subsystem initialized Jun 30 10:47:31.972589 [ 0.732082] usbcore: registered new interface driver usbfs Jun 30 10:47:31.984608 [ 0.737313] usbcore: registered new interface driver hub Jun 30 10:47:31.984608 [ 0.742653] usbcore: registered new device driver usb Jun 30 10:47:31.996602 [ 0.749370] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 10:47:31.996602 [ 0.752965] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 10:47:32.008606 [ 0.759221] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 10:47:32.008606 [ 0.764288] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 10:47:32.020778 [ 0.769217] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 10:47:32.020860 [ 0.775255] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 10:47:32.020908 [ 0.781035] pps_core: LinuxPPS API ver. 1 registered Jun 30 10:47:32.032603 [ 0.785424] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 10:47:32.044728 [ 0.794652] PTP clock support registered Jun 30 10:47:32.044793 [ 0.798887] EDAC MC: Ver: 3.0.0 Jun 30 10:47:32.044838 [ 0.802147] scmi_core: SCMI protocol bus registered Jun 30 10:47:32.056589 [ 0.808839] vgaarb: loaded Jun 30 10:47:32.056589 [ 0.812080] clocksource: Switched to clocksource arch_sys_counter Jun 30 10:47:32.056589 [ 0.829207] NET: Registered PF_INET protocol family Jun 30 10:47:32.080586 [ 0.832868] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Jun 30 10:47:32.080586 [ 0.840754] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 10:47:32.092601 [ 0.848469] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 10:47:32.104712 [ 0.856254] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Jun 30 10:47:32.104728 [ 0.864089] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Jun 30 10:47:32.114154 [ 0.871364] TCP: Hash tables configured (established 4096 bind 4096) Jun 30 10:47:32.128623 [ 0.877738] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 10:47:32.128623 [ 0.884307] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 10:47:32.140787 [ 0.891401] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 10:47:32.140857 [ 0.897565] RPC: Registered named UNIX socket transport module. Jun 30 10:47:32.152617 [ 0.903042] RPC: Registered udp transport module. Jun 30 10:47:32.152617 [ 0.907820] RPC: Registered tcp transport module. Jun 30 10:47:32.152617 [ 0.912592] RPC: Registered tcp-with-tls transport module. Jun 30 10:47:32.164577 [ 0.918144] RPC: Registered tcp NFSv4.1 backchannel transport module. Jun 30 10:47:32.164577 [ 0.924656] PCI: CLS 0 bytes, default 64 Jun 30 10:47:32.176582 [ 0.930055] Initialise system trusted keyrings Jun 30 10:47:32.176582 [ 0.933373] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Jun 30 10:47:32.188603 [ 0.939899] squashfs: version 4.0 (2009/01/31) Phillip Lougher Jun 30 10:47:32.188603 [ 0.945779] NFS: Registering the id_resolver key type Jun 30 10:47:32.200557 [ 0.950703] Key type id_resolver registered Jun 30 10:47:32.200557 [ 0.954944] Key type id_legacy registered Jun 30 10:47:32.200557 [ 0.959047] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Jun 30 10:47:32.212606 [ 0.965802] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Jun 30 10:47:32.224563 [ 0.973517] Trying to unpack rootfs image as initramfs... Jun 30 10:47:32.224563 [ 0.994864] Key type asymmetric registered Jun 30 10:47:32.248592 [ 0.997607] Asymmetric key parser 'x509' registered Jun 30 10:47:32.248592 [ 1.002671] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) Jun 30 10:47:32.260573 [ 1.010021] io scheduler mq-deadline registered Jun 30 10:47:32.260573 [ 1.014639] io scheduler kyber registered Jun 30 10:47:32.260573 [ 1.018752] io scheduler bfq registered Jun 30 10:47:32.272534 [ 1.160227] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 10:47:32.416594 [ 1.166477] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 10:47:32.416594 [ 1.220504] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 10:47:32.468569 [ 1.226769] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 10:47:32.480560 [ 1.255002] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 10:47:32.504607 [ 1.261246] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 10:47:32.516564 [ 1.312332] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 10:47:32.564596 [ 1.318567] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 10:47:32.576543 [ 1.331317] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 10:47:32.588541 [ 1.393734] xen:xen_evtchn: Event-channel device installed Jun 30 10:47:32.648582 [ 1.469987] Freeing initrd memory: 11860K Jun 30 10:47:32.720593 [ 1.493385] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 10:47:32.744627 [ 1.504399] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 10:47:32.756661 [ 1.512597] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 10:47:32.768648 [ 1.521474] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 10:47:32.780624 [ 1.530489] SuperH (H)SCI(F) driver initialized Jun 30 10:47:32.780624 [ 1.534811] STMicroelectronics ASC driver initialized Jun 30 10:47:32.780624 [ 1.539660] STM32 USART driver initialized Jun 30 10:47:32.792649 [ 1.545137] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 10:47:32.792649 [ 1.559550] brd: module loaded Jun 30 10:47:32.804612 [ 1.565754] loop: module loaded Jun 30 10:47:32.816582 [ 1.568011] random: crng init done Jun 30 10:47:32.816582 [ 1.582885] Invalid max_queues (4), will use default max: 2. Jun 30 10:47:32.828613 [ 1.601549] tun: Universal TUN/TAP device driver, 1.6 Jun 30 10:47:32.852807 [ 1.605423] CAN device driver interface Jun 30 10:47:32.852879 [ 1.610551] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Jun 30 10:47:32.864798 [ 1.621760] xen_netfront: Initialising Xen virtual ethernet driver Jun 30 10:47:32.873726 [ 1.626628] pegasus: Pegasus/Pegasus II USB Ethernet driver Jun 30 10:47:32.873788 [ 1.632251] usbcore: registered new interface driver pegasus Jun 30 10:47:32.885750 [ 1.637956] usbcore: registered new interface driver asix Jun 30 10:47:32.885811 [ 1.643439] usbcore: registered new interface driver ax88179_178a Jun 30 10:47:32.897750 [ 1.649588] usbcore: registered new interface driver cdc_ether Jun 30 10:47:32.897817 [ 1.655508] usbcore: registered new interface driver smsc75xx Jun 30 10:47:32.909755 [ 1.661306] usbcore: registered new interface driver smsc95xx Jun 30 10:47:32.909817 [ 1.667135] usbcore: registered new interface driver net1080 Jun 30 10:47:32.921740 [ 1.672869] usbcore: registered new interface driver cdc_subset Jun 30 10:47:32.921802 [ 1.678844] usbcore: registered new interface driver zaurus Jun 30 10:47:32.933747 [ 1.684498] usbcore: registered new interface driver cdc_ncm Jun 30 10:47:32.933796 [ 1.693864] usbcore: registered new interface driver usb-storage Jun 30 10:47:32.945696 [ 1.704382] i2c_dev: i2c /dev entries driver Jun 30 10:47:32.957675 [ 1.722784] device-mapper: uevent: version 1.0.3 Jun 30 10:47:32.969726 [ 1.726200] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev Jun 30 10:47:32.981766 [ 1.735809] cpu cpu0: OPP table can't be empty Jun 30 10:47:32.981825 [ 1.740527] failed to register cpuidle driver Jun 30 10:47:32.993727 [ 1.743938] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Jun 30 10:47:32.993791 [ 1.752269] sdhci: Secure Digital Host Controller Interface driver Jun 30 10:47:33.005735 [ 1.757272] sdhci: Copyright(c) Pierre Ossman Jun 30 10:47:33.005833 [ 1.765336] sdhci-pltfm: SDHCI platform and OF driver helper Jun 30 10:47:33.017700 [ 1.782239] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 10:47:33.029748 [ 1.787674] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Jun 30 10:47:33.041752 [ 1.794374] usbcore: registered new interface driver usbhid Jun 30 10:47:33.041814 [ 1.799034] usbhid: USB HID core driver Jun 30 10:47:33.053710 [ 1.810012] NET: Registered PF_INET6 protocol family Jun 30 10:47:33.053772 [ 1.814403] Segment Routing with IPv6 Jun 30 10:47:33.065739 [ 1.817368] In-situ OAM (IOAM) with IPv6 Jun 30 10:47:33.065798 [ 1.821387] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Jun 30 10:47:33.077727 [ 1.827885] NET: Registered PF_PACKET protocol family Jun 30 10:47:33.077790 [ 1.832512] can: controller area network core Jun 30 10:47:33.077842 [ 1.836902] NET: Registered PF_CAN protocol family Jun 30 10:47:33.089745 [ 1.841732] can: raw protocol Jun 30 10:47:33.089801 [ 1.844782] can: broadcast manager protocol Jun 30 10:47:33.089847 [ 1.849048] can: netlink gateway - max_hops=1 Jun 30 10:47:33.101752 [ 1.853783] Key type dns_resolver registered Jun 30 10:47:33.101811 [ 1.858460] ThumbEE CPU extension supported. Jun 30 10:47:33.113699 [ 1.862187] Registering SWP/SWPB emulation handler Jun 30 10:47:33.113760 [ 1.876538] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level Jun 30 10:47:33.125661 [ 1.883435] Loading compiled-in X.509 certificates Jun 30 10:47:33.137687 [ 1.926627] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 10:47:33.173733 [ 1.930227] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 10:47:33.185745 [ 1.937194] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 10:47:33.185844 [ 1.945028] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 10:47:33.197743 [ 1.986430] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 10:47:33.233714 [ 1.995280] s5m-rtc s5m-rtc: setting system clock to 2024-06-30T10:47:34 UTC (1719744454) Jun 30 10:47:33.245737 [ 2.006423] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 10:47:33.257739 [ 2.011034] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 10:47:33.257799 [ 2.015472] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 10:47:33.269753 [ 2.022223] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 10:47:33.269813 [ 2.028030] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 10:47:33.281752 [ 2.034307] clk: Not disabling unused clocks Jun 30 10:47:33.281811 [ 2.037709] PM: genpd: Disabling unused power domains Jun 30 10:47:33.293722 [ 2.046325] Freeing unused kernel image (initmem) memory: 2048K Jun 30 10:47:33.293785 [ 2.052676] Run /init as init process Jun 30 10:47:33.305676 Loading, please wait... Jun 30 10:47:33.329685 Starting systemd-udevd version 252.26-1~deb12u2 Jun 30 10:47:33.401677 [ 3.212983] i2c-gpio i2c-10: using lines 552 (SDA) and 553 (SCL) Jun 30 10:47:34.457788 [ 3.337901] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 10:47:34.589729 [ 3.382818] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 10:47:34.637719 [ 3.434546] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 10:47:34.685726 [ 3.469086] phy phy-12130000.phy.7: phy_power_on was called before phy_init Jun 30 10:47:34.721742 [ 3.474729] exynos-ohci 12120000.usb: USB Host Controller Jun 30 10:47:34.721804 [ 3.495001] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Jun 30 10:47:34.745726 [ 3.508779] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 Jun 30 10:47:34.757718 [ 3.572687] phy phy-12130000.phy.7: phy_power_on was called before phy_init Jun 30 10:47:34.829740 [ 3.578280] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 10:47:34.829846 [ 3.583885] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Jun 30 10:47:34.841678 [ 3.609121] hub 1-0:1.0: USB hub found Jun 30 10:47:34.853717 [ 3.611556] hub 1-0:1.0: 3 ports detected Jun 30 10:47:34.865678 [ 3.646725] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 30 10:47:34.901701 [ 3.682558] Synopsys Designware Multimedia Card Interface Driver Jun 30 10:47:34.937723 [ 3.683030] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 30 10:47:34.937792 [ 3.704825] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 Jun 30 10:47:34.949731 [ 3.725311] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 30 10:47:34.973755 [ 3.732235] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 30 10:47:34.985759 [ 3.739457] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 30 10:47:34.985822 [ 3.746485] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 30 10:47:34.997744 [ 3.747809] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 10:47:34.997805 [ 3.751934] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 30 10:47:35.009745 [ 3.758711] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 10:47:35.009808 [ 3.762626] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo Jun 30 10:47:35.021778 [ 3.774767] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Jun 30 10:47:35.033714 [ 3.778625] mmc_host mmc0: card is polling. Jun 30 10:47:35.033774 [ 3.808952] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 30 10:47:35.057750 [ 3.814084] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 30 10:47:35.069734 [ 3.819576] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 127,32 bit host data width,128 deep fifo Jun 30 10:47:35.069807 [ 3.831663] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 30 10:47:35.081756 [ 3.837417] ahci-dwc 122f0000.sata: AHCI vers 0001.0300, 32 command slots, 6 Gbps, platform mode Jun 30 10:47:35.093753 [ 3.846228] ahci-dwc 122f0000.sata: 1/1 ports implemented (port mask 0x1) Jun 30 10:47:35.093817 [ 3.853088] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 30 10:47:35.105736 [ 3.881998] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 10:47:35.141720 [ 3.887914] hub 2-0:1.0: USB hub found Jun 30 10:47:35.141780 [ 3.900545] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 10:47:35.153736 [ 3.915167] s3c-rtc 101e0000.rtc: registered as rtc1 Jun 30 10:47:35.165738 [ 3.921090] hub 2-0:1.0: 3 ports detected Jun 30 10:47:35.165796 [ 3.931341] scsi host0: ahci-dwc Jun 30 10:47:35.177697 [ 3.938831] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 129 lpm-pol 0 Jun 30 10:47:35.189735 [ 4.028015] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 30 10:47:35.285744 [ 4.037702] mmc0: new DDR MMC card at address 0001 Jun 30 10:47:35.285805 [ 4.042370] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Jun 30 10:47:35.285851 [ 4.048663] mmcblk0: p1 p2 p3 p4 Jun 30 10:47:35.297732 [ 4.051973] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Jun 30 10:47:35.297792 [ 4.057938] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Jun 30 10:47:35.309713 [ 4.063795] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Jun 30 10:47:35.309776 [ 4.125306] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 10:47:35.381756 [ 4.134123] mmc1: new high speed SDHC card at address aaaa Jun 30 10:47:35.381816 [ 4.140147] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Jun 30 10:47:35.393689 [ 4.472160] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 30 10:47:35.717770 [ 4.477860] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 30 10:47:35.729772 [ 4.483797] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 30 10:47:35.741741 [ 4.491348] ata1.00: configured for UDMA/133 Jun 30 10:47:35.741801 [ 4.495275] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 30 10:47:35.753740 [ 4.504273] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 30 10:47:35.753809 [ 4.510400] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 30 10:47:35.765765 [ 4.515838] sd 0:0:0:0: [sda] Write Protect is off Jun 30 10:47:35.765826 [ 4.520632] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 30 10:47:35.777730 [ 4.529826] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 30 10:47:35.777730 [ 4.548007] sda: sda1 sda2 < sda5 > Jun 30 10:47:35.801696 [ 4.550755] sd 0:0:0:0: [sda] Attached SCSI disk Jun 30 10:47:35.801756 [ 4.589699] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Jun 30 10:47:35.837719 [ 4.624729] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 10:47:35.873751 [ 4.629563] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 10:47:35.885690 [ 4.692528] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002000010 Jun 30 10:47:35.945750 [ 4.704309] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Jun 30 10:47:35.957751 [ 4.709303] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 10:47:35.957813 [ 4.714595] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 10:47:35.969744 [ 4.722344] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 10:47:35.969806 [ 4.731110] hub 3-0:1.0: USB hub found Jun 30 10:47:35.981749 [ 4.733751] hub 3-0:1.0: 1 port detected Jun 30 10:47:35.981807 [ 4.738734] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 10:47:35.993693 [ 4.778625] hub 4-0:1.0: USB hub found Jun 30 10:47:36.029718 [ 4.781082] hub 4-0:1.0: 1 port detected Jun 30 10:47:36.029777 [ 5.035792] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 10:47:36.293693 [ 5.200879] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 10:47:36.449752 [ 5.334937] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 10:47:36.593687 [ 5.443201] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 10:47:36.701595 [ 5.551426] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 10:47:36.809600 [ 5.659640] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 10:47:36.917606 [ 5.821354] I/O error, dev mmcblk1, sector 7743712 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 Jun 30 10:47:37.073650 [ 5.929462] I/O error, dev mmcblk1, sector 7743713 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 Jun 30 10:47:37.181641 [ 6.037568] I/O error, dev mmcblk1, sector 7743714 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 Jun 30 10:47:37.289648 [ 6.345771] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 10:47:37.601604 [ 6.522554] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 10:47:37.781575 [ 6.636921] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 10:47:37.889626 [ 6.744674] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 10:47:37.997644 [ 6.852433] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 10:47:38.105655 [ 6.960145] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 10:47:38.213621 Begin: Loading essential drivers ... done. Jun 30 10:47:38.273597 Begin: Running /scripts/init-premount ... done. Jun 30 10:47:41.285789 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 30 10:47:41.297625 Begin: Running /scripts/local-premount ... done. Jun 30 10:47:41.297673 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 30 10:47:41.357596 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 30 10:47:41.501798 /dev/mapper/arndale--metrocentre--vg-root: clean, 46073/1220608 files, 606072/4882432 blocks Jun 30 10:47:41.753698 done. Jun 30 10:47:41.777611 [ 10.537049] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 30 10:47:41.789628 [ 10.900462] EXT4-fs (dm-0): mounted filesystem f7502202-a08c-485a-b088-73e644f85daa ro with ordered data mode. Quota mode: disabled. Jun 30 10:47:42.161613 done. Jun 30 10:47:42.161673 Begin: Running /scripts/local-bottom ... done. Jun 30 10:47:42.209605 Begin: Running /scripts/init-bottom ... done. Jun 30 10:47:42.257599 INIT: version 3.06 booting Jun 30 10:47:42.737675 INIT: No inittab.d directory found Jun 30 10:47:42.836625 Using makefile-style concurrent boot in runlevel S. Jun 30 10:47:43.172606 Starting hotplug events dispatcher: systemd-udevd. Jun 30 10:47:44.953727 Synthesizing the initial hotplug events (subsystems)...done. Jun 30 10:47:45.421824 Synthesizing the initial hotplug events (devices)...done. Jun 30 10:47:46.225697 Waiting for /dev to be fully populated...[ 15.135001] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 30 10:47:46.381800 [ 15.155108] usb3503 usb-hub: switched to HUB mode Jun 30 10:47:46.405715 [ 15.158491] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 10:47:46.405749 [ 15.173281] s5p-secss 10830000.sss: s5p-sss driver registered Jun 30 10:47:46.417808 [ 15.179313] mc: Linux media interface: v0.10 Jun 30 10:47:46.429755 [ 15.350920] videodev: Linux video capture interface: v2.00 Jun 30 10:47:46.597805 [ 15.529693] s5p-mfc 11000000.codec: Adding to iommu group 0 Jun 30 10:47:46.777817 [ 15.588071] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Jun 30 10:47:46.837821 [ 15.661686] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 10:47:46.909847 [ 15.669318] usb 2-3: new high-speed USB device number 2 using exynos-ehci Jun 30 10:47:46.921830 [ 15.669404] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 10:47:46.921900 [ 15.684953] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 10:47:46.933851 [ 15.696332] s5p-mfc 11000000.codec: decoder registered as /dev/video0 Jun 30 10:47:46.945826 [ 15.702565] s5p-mfc 11000000.codec: encoder registered as /dev/video1 Jun 30 10:47:46.945888 [ 15.892098] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 10:47:47.137861 [ 15.905842] hub 2-3:1.0: USB hub found Jun 30 10:47:47.149815 [ 15.909203] exynos-gsc 13e00000.gsc: Adding to iommu group 1 Jun 30 10:47:47.161694 [ 15.914738] hub 2-3:1.0: 3 ports detected Jun 30 10:47:47.161726 [ 15.924457] exynos-gsc 13e10000.gsc: Adding to iommu group 2 Jun 30 10:47:47.173689 [ 15.933918] exynos-gsc 13e20000.gsc: Adding to iommu group 3 Jun 30 10:47:47.185677 [ 15.942386] exynos-gsc 13e30000.gsc: Adding to iommu group 4 Jun 30 10:47:47.185712 [ 15.992529] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 10:47:47.245797 [ 16.007585] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Jun 30 10:47:47.257836 [ 16.030228] wm8994 3-001a: Device is not a WM8994, ID is 0 Jun 30 10:47:47.281763 [ 16.065798] wm8994 3-001a: probe with driver wm8994 failed with error -22 Jun 30 10:47:47.317769 [ 16.145313] blk_print_req_error: 1 callbacks suppressed Jun 30 10:47:47.392828 [ 16.145330] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 10:47:47.404768 [ 16.258904] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 10:47:47.512797 [ 16.293258] usb 2-3.2: new high-speed USB device number 3 using exynos-ehci Jun 30 10:47:47.548724 [ 16.367169] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 10:47:47.619390 [ 16.470569] hub 2-3.2:1.0: USB hub found Jun 30 10:47:47.716572 [ 16.475468] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 10:47:47.728553 [ 16.484010] hub 2-3.2:1.0: 4 ports detected Jun 30 10:47:47.728553 [ 16.655785] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 10:47:47.905776 [ 16.663514] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 10:47:47.917762 [ 16.672185] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 10:47:47.929751 [ 16.685825] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 10:47:47.941760 [ 16.693549] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 10:47:47.941831 [ 16.702274] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 10:47:47.953745 [ 16.832120] usb 2-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 30 10:47:48.085757 [ 16.840499] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 10:47:48.085831 [ 16.986295] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 30 10:47:48.241666 [ 17.011879] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 10:47:48.265712 [ 17.126299] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 10:47:48.373754 [ 17.234100] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 10:47:48.481757 [ 17.341839] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 10:47:48.589773 [ 17.449610] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 10:47:48.697799 [ 17.457242] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 10:47:48.709707 [ 17.683926] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 10:47:48.937763 [ 17.698296] Asix Electronics AX88772A usb-002:004:10: attached PHY driver (mii_bus:phy_addr=usb-002:004:10, irq=POLL) Jun 30 10:47:48.949769 [ 17.708146] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 06:70:01:81:f7:f7 Jun 30 10:47:48.961733 [ 17.744505] usbcore: registered new device driver onboard-usb-dev Jun 30 10:47:48.997765 [ 17.751615] usb 2-3.2.4: USB disconnect, device number 4 Jun 30 10:47:48.997828 [ 17.755904] asix 2-3.2.4:1.0 eth0: unregister 'asix' usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet Jun 30 10:47:49.009718 [ 17.942875] hub 2-3.2:1.0: USB hub found Jun 30 10:47:49.189745 [ 17.945832] hub 2-3.2:1.0: 4 ports detected Jun 30 10:47:49.189803 [ 17.957718] hub 2-3.2:1.0: USB hub found Jun 30 10:47:49.201737 [ 17.960682] hub 2-3.2:1.0: 4 ports detected Jun 30 10:47:49.201795 [ 18.302129] usb 2-3.2.4: new high-speed USB device number 5 using exynos-ehci Jun 30 10:47:49.549771 [ 19.103924] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:005:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 10:47:50.357804 [ 19.118297] Asix Electronics AX88772A usb-002:005:10: attached PHY driver (mii_bus:phy_addr=usb-002:005:10, irq=POLL) Jun 30 10:47:50.369760 [ 19.128182] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 06:70:01:81:f7:f7 Jun 30 10:47:50.381736 [ 19.227855] asix 2-3.2.4:1.0 enx06700181f7f7: renamed from eth0 Jun 30 10:47:50.477708 done. Jun 30 10:47:50.573698 [ 19.759421] EXT4-fs (dm-0): re-mounted f7502202-a08c-485a-b088-73e644f85daa r/w. Quota mode: disabled. Jun 30 10:47:51.005699 Checking file systems.../dev/sda1: clean, 2179/61056 files, 44464/243968 blocks Jun 30 10:47:52.505786 done. Jun 30 10:47:52.529689 Cleaning up temporary files... /tmp. Jun 30 10:47:52.793755 [ 21.738316] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 30 10:47:52.985782 [ 21.790249] EXT4-fs (sda1): mounted filesystem c0e4880f-25d6-4ded-a490-3e8df078eab1 r/w with ordered data mode. Quota mode: disabled. Jun 30 10:47:53.045747 [ 21.890552] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k Jun 30 10:47:53.141758 Mounting local filesystems...done. Jun 30 10:47:53.393741 Activating swapfile swap, if any...done. Jun 30 10:47:53.405700 Cleaning up temporary files.... Jun 30 10:47:53.429716 Starting Setting kernel variables: sysctl. Jun 30 10:47:53.621720 Configuring network interfaces...RTNETLINK answers: Operation not supported Jun 30 10:47:54.341749 done. Jun 30 10:47:54.341822 Cleaning up temporary files.... Jun 30 10:47:54.413732 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Jun 30 10:47:54.449735 Starting nftables: none Jun 30 10:47:54.509704 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Jun 30 10:47:54.641741 failed! Jun 30 10:47:54.641794 startpar: service(s) returned failure: nftables ... failed! Jun 30 10:47:54.641841 INIT: Entering runlevel: 2 Jun 30 10:47:54.653708 Using makefile-style concurrent boot in runlevel 2. Jun 30 10:47:54.677699 Starting Apache httpd web server: apache2[ 28.173971] platform sound: deferred probe pending: arndale-audio: snd_soc_register_card() failed Jun 30 10:47:59.421745 AH00557: apache2: apr_sockaddr_info_get() failed for arndale-metrocentre Jun 30 10:48:20.464603 AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1. Set the 'ServerName' directive globally to suppress this message Jun 30 10:48:20.476539 . Jun 30 10:48:33.612816 Starting NTP server: ntpd2024-06-30T10:48:35 ntpd[1110]: INIT: ntpd ntpsec-1.2.2: Starting Jun 30 10:48:34.116773 2024-06-30T10:48:35 ntpd[1110]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 30 10:48:34.128770 . Jun 30 10:48:34.128821 Starting SMP IRQ Balancer: irqbalance. Jun 30 10:48:34.356716 Starting system message bus: dbus. Jun 30 10:48:34.588723 Starting OpenBSD Secure Shell server: sshd. Jun 30 10:48:35.245622 Starting /usr/local/sbin/xenstored... Jun 30 10:48:37.157648 Setting domain 0 name, domid and JSON config... Jun 30 10:48:37.169525 Done setting up Dom0 Jun 30 10:48:37.169625 Starting xenconsoled... Jun 30 10:48:37.169675 Starting QEMU as disk backend for dom0 Jun 30 10:48:37.169700 Jun 30 10:48:38.261798 Debian GNU/Linux 12 arndale-metrocentre hvc0 Jun 30 10:48:38.261884 Jun 30 10:48:38.261923 arndale-metrocentre login: INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 10:50:17.297733 Jun 30 10:54:05.957931 (XEN) *** Serial input to Xen (type 'CTRL-x' three times to switch input) Jun 30 10:54:05.981710 Jun 30 10:54:05.982449 Jun 30 10:54:06.957975 (XEN) '0' pressed -> dumping Dom0's registers Jun 30 10:54:06.977717 (XEN) *** Dumping Dom0 vcpu#0 state: *** Jun 30 10:54:06.977749 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Jun 30 10:54:06.979016 Not tainted ]---- Jun 30 10:54:06.989645 (XEN) CPU: 0 Jun 30 10:54:06.989674 (XEN) PC: c031be28 Jun 30 10:54:06.989697 (XEN) CPSR: 60070093 MODE:32-bit Guest SVC Jun 30 10:54:06.989721 (XEN) R0: 00000005 R1: 00000000 R2: 000307a1 R3: c031be20 Jun 30 10:54:07.001738 (XEN) R4: c1b09d40 R5: c1d26f50 R6: c1b04e5c R7: c1b04e98 Jun 30 10:54:07.001788 (XEN) R8: 00000000 R9: 00000000 R10:000000ad R11:00000000 R12:c1d264a0 Jun 30 10:54:07.013713 (XEN) USR: SP: be8e0960 LR: b6e34685 Jun 30 10:54:07.013774 (XEN) SVC: SP: c1b01f78 LR: c114e078 SPSR:60070013 Jun 30 10:54:07.013820 (XEN) ABT: SP: c1d38b10 LR: c0300ec0 SPSR:60030193 Jun 30 10:54:07.025683 (XEN) UND: SP: c1d38b20 LR: c0300fc0 SPSR:600e0093 Jun 30 10:54:07.025722 (XEN) IRQ: SP: c1d38b00 LR: c0300bc0 SPSR:60070193 Jun 30 10:54:07.037697 (XEN) FIQ: SP: c1d38b30 LR: c1d38b30 SPSR:00000000 Jun 30 10:54:07.037730 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Jun 30 10:54:07.037757 (XEN) Jun 30 10:54:07.049688 (XEN) SCTLR: 10c5387d Jun 30 10:54:07.049719 (XEN) TCR: 00000000 Jun 30 10:54:07.049742 (XEN) TTBR0: 000000006736806a Jun 30 10:54:07.049765 (XEN) TTBR1: 000000006020406a Jun 30 10:54:07.049788 (XEN) IFAR: b6e72a4c, IFSR: 00000007 Jun 30 10:54:07.061686 (XEN) DFAR: 0042cffc, DFSR: 00000817 Jun 30 10:54:07.061718 (XEN) Jun 30 10:54:07.061740 (XEN) VTCR_EL2: 80003558 Jun 30 10:54:07.061762 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 10:54:07.073695 (XEN) Jun 30 10:54:07.073723 (XEN) SCTLR_EL2: 30cd187f Jun 30 10:54:07.073747 (XEN) HCR_EL2: 007c663f Jun 30 10:54:07.073769 (XEN) TTBR0_EL2: 0000000041107000 Jun 30 10:54:07.073792 (XEN) Jun 30 10:54:07.073813 (XEN) ESR_EL2: 07e00000 Jun 30 10:54:07.085691 (XEN) HPFAR_EL2: 00104810 Jun 30 10:54:07.085721 (XEN) HDFAR: e0807f00 Jun 30 10:54:07.085744 (XEN) HIFAR: c0d9e04c Jun 30 10:54:07.085767 (XEN) Jun 30 10:54:07.085788 (XEN) Guest stack trace from sp=c1b01f78: Jun 30 10:54:07.097689 (XEN) Failed to convert stack to physical address Jun 30 10:54:07.097723 (XEN) *** Dumping Dom0 vcpu#1 state: *** Jun 30 10:54:07.097748 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Not tainted ]---- Jun 30 10:54:07.109692 (XEN) CPU: 0 Jun 30 10:54:07.109722 (XEN) PC: c031be28 Jun 30 10:54:07.109745 (XEN) CPSR: 600e0093 MODE:32-bit Guest SVC Jun 30 10:54:07.109769 (XEN) R0: 00000005 R1: 00000000 R2: 00010739 R3: c031be20 Jun 30 10:54:07.121687 (XEN) R4: c2110880 R5: c1d26f50 R6: c1b04e5c R7: c1b04e98 Jun 30 10:54:07.121720 (XEN) R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:c1d264a0 Jun 30 10:54:07.133699 (XEN) USR: SP: bedc8938 LR: b6bee853 Jun 30 10:54:07.133730 (XEN) SVC: SP: e08d9fa0 LR: c114e078 SPSR:600e0013 Jun 30 10:54:07.133756 (XEN) ABT: SP: c1d38b50 LR: c0300ec0 SPSR:60030193 Jun 30 10:54:07.145675 (XEN) UND: SP: c1d38b60 LR: c0300fc0 SPSR:600e0093 Jun 30 10:54:07.145708 (XEN) IRQ: SP: c1d38b40 LR: c0300bc0 SPSR:600e0193 Jun 30 10:54:07.157698 (XEN) FIQ: SP: c1d38b70 LR: c1d38b70 SPSR:00000000 Jun 30 10:54:07.157730 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Jun 30 10:54:07.169664 (XEN) Jun 30 10:54:07.169692 (XEN) SCTLR: 10c5387d Jun 30 10:54:07.169716 (XEN) TCR: 00000000 Jun 30 10:54:07.169739 (XEN) TTBR0: 000000006421c06a Jun 30 10:54:07.169762 (XEN) TTBR1: 000000006020406a Jun 30 10:54:07.181679 (XEN) IFAR: b6f2fe90, IFSR: 00000007 Jun 30 10:54:07.181711 (XEN) DFAR: b6ecbabc, DFSR: 0000081f Jun 30 10:54:07.181735 (XEN) Jun 30 10:54:07.181756 (XEN) VTCR_EL2: 80003558 Jun 30 10:54:07.181778 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 10:54:07.193693 (XEN) Jun 30 10:54:07.193721 (XEN) SCTLR_EL2: 30cd187f Jun 30 10:54:07.193755 (XEN) HCR_EL2: 007c663f Jun 30 10:54:07.193780 (XEN) TTBR0_EL2: 0000000041107000 Jun 30 10:54:07.193803 (XEN) Jun 30 10:54:07.193823 (XEN) ESR_EL2: 07e00000 Jun 30 10:54:07.205701 (XEN) HPFAR_EL2: 00104810 Jun 30 10:54:07.205731 (XEN) HDFAR: e0807f00 Jun 30 10:54:07.205755 (XEN) HIFAR: c0d9e04c Jun 30 10:54:07.205777 (XEN) Jun 30 10:54:07.205798 (XEN) Guest stack trace from sp=e08d9fa0: Jun 30 10:54:07.217655 (XEN) Failed to convert stack to physical address Jun 30 10:54:07.217713 Jun 30 10:54:08.996348 (XEN) 'H' pressed -> dumping heap info (now = 403145147916) Jun 30 10:54:09.021804 (XEN) heap[node=0][zone=0] -> 16284 pages Jun 30 10:54:09.021864 (XEN) heap[node=0][zone=1] -> 0 Jun 30 10:54:09.024347 pages Jun 30 10:54:09.033784 (XEN) heap[node=0][zone=2] -> 0 pages Jun 30 10:54:09.033841 (XEN) heap[node=0][zone=3] -> 0 pages Jun 30 10:54:09.033887 (XEN) heap[node=0][zone=4] -> 0 pages Jun 30 10:54:09.033931 (XEN) heap[node=0][zone=5] -> 0 pages Jun 30 10:54:09.045818 (XEN) heap[node=0][zone=6] -> 0 pages Jun 30 10:54:09.045878 (XEN) heap[node=0][zone=7] -> 0 pages Jun 30 10:54:09.045923 (XEN) heap[node=0][zone=8] -> 0 pages Jun 30 10:54:09.057745 (XEN) heap[node=0][zone=9] -> 0 pages Jun 30 10:54:09.057805 (XEN) heap[node=0][zone=10] -> 0 pages Jun 30 10:54:09.057851 (XEN) heap[node=0][zone=11] -> 0 pages Jun 30 10:54:09.057895 (XEN) heap[node=0][zone=12] -> 0 pages Jun 30 10:54:09.069747 (XEN) heap[node=0][zone=13] -> 0 pages Jun 30 10:54:09.069806 (XEN) heap[node=0][zone=14] -> 0 pages Jun 30 10:54:09.069851 (XEN) heap[node=0][zone=15] -> 0 pages Jun 30 10:54:09.081633 (XEN) heap[node=0][zone=16] -> 0 pages Jun 30 10:54:09.081666 (XEN) heap[node=0][zone=17] -> 0 pages Jun 30 10:54:09.081691 (XEN) heap[node=0][zone=18] -> 0 pages Jun 30 10:54:09.081715 (XEN) heap[node=0][zone=19] -> 130833 pages Jun 30 10:54:09.093611 (XEN) heap[node=0][zone=20] -> 241626 pages Jun 30 10:54:09.093639 (XEN) heap[node=0][zone=21] -> 0 pages Jun 30 10:54:09.093663 (XEN) heap[node=0][zone=22] -> 0 pages Jun 30 10:54:09.105691 (XEN) heap[node=0][zone=23] -> 0 pages Jun 30 10:54:09.105741 (XEN) heap[node=0][zone=24] -> 0 pages Jun 30 10:54:09.105784 (XEN) heap[node=0][zone=25] -> 0 pages Jun 30 10:54:09.117719 (XEN) heap[node=0][zone=26] -> 0 pages Jun 30 10:54:09.117778 (XEN) heap[node=0][zone=27] -> 0 pages Jun 30 10:54:09.117824 (XEN) heap[node=0][zone=28] -> 0 pages Jun 30 10:54:09.117869 Jun 30 10:54:10.999860 Jun 30 10:54:12.765474 Jun 30 10:54:13.004230 Jun 30 10:54:14.772521 Jun 30 10:54:15.012457 (XEN) Dumping timer queues: Jun 30 10:54:15.037812 (XEN) CPU00: Jun 30 10:54:15.037869 (XEN) ex= 9853us timer=43fef968 cb=vtimer.c#virt_timer_expired(43fef960) Jun 30 10:54:15.037925 (XEN) CPU0 Jun 30 10:54:15.040222 1: Jun 30 10:54:15.049682 (XEN) ex= 276296us timer=43fdc968 cb=vtimer.c#virt_timer_expired(43fdc960) Jun 30 10:54:15.049753 Jun 30 10:54:17.010617 Jun 30 10:54:18.780533 Jun 30 10:54:19.010719 (XEN) 'd' pressed -> dumping registers Jun 30 10:54:19.033859 (XEN) Jun 30 10:54:19.033879 (XEN) *** Dumping CPU0 host state: *** Jun 30 10:54:19.033904 (XEN) ----[ Xen-4.19-unstable arm32 debug=y N Jun 30 10:54:19.036032 ot tainted ]---- Jun 30 10:54:19.045793 (XEN) CPU: 0 Jun 30 10:54:19.045834 (XEN) PC: 0025ef7c domain.c#idle_loop+0x130/0x1ac Jun 30 10:54:19.045883 (XEN) CPSR: 6007005a MODE:Hypervisor Jun 30 10:54:19.045929 (XEN) R0: 00000000 R1: 0029f300 R2: 00000000 R3: 00000000 Jun 30 10:54:19.057851 (XEN) R4: 00000000 R5: 002f80e0 R6: 0032b324 R7: 00000001 Jun 30 10:54:19.057914 (XEN) R8: 0032b104 R9: 00000000 R10:40e00000 R11:4003ff54 R12:fffffffc Jun 30 10:54:19.069839 (XEN) HYP: SP: 4003ff44 LR: 00225cb8 Jun 30 10:54:19.069896 (XEN) Jun 30 10:54:19.069936 (XEN) VTCR_EL2: 80003558 Jun 30 10:54:19.069977 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 10:54:19.081859 (XEN) Jun 30 10:54:19.081893 (XEN) SCTLR_EL2: 30cd187f Jun 30 10:54:19.081937 (XEN) HCR_EL2: 007c663f Jun 30 10:54:19.081978 (XEN) TTBR0_EL2: 0000000041107000 Jun 30 10:54:19.082020 (XEN) Jun 30 10:54:19.082058 (XEN) ESR_EL2: 07e00000 Jun 30 10:54:19.093812 (XEN) HPFAR_EL2: 00104810 Jun 30 10:54:19.093887 (XEN) HDFAR: e0807f00 Jun 30 10:54:19.093910 (XEN) HIFAR: c0d9e04c Jun 30 10:54:19.093951 (XEN) Jun 30 10:54:19.093989 (XEN) Xen stack trace from sp=4003ff44: Jun 30 10:54:19.105832 (XEN) 07e00000 00295014 002919ac 4003ff4c 00267818 00000000 00000000 00000000 Jun 30 10:54:19.105894 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 10:54:19.117853 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 10:54:19.117902 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 10:54:19.129835 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 10:54:19.141870 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 10:54:19.141953 (XEN) Xen call trace: Jun 30 10:54:19.141976 (XEN) [<0025ef7c>] domain.c#idle_loop+0x130/0x1ac (PC) Jun 30 10:54:19.153904 (XEN) [<00225cb8>] rcu_needs_cpu+0x40/0x60 (LR) Jun 30 10:54:19.153965 (XEN) [<00267818>] arch_get_xen_caps+0/0x90 Jun 30 10:54:19.154012 (XEN) Jun 30 10:54:19.165806 (XEN) *** Dumping CPU1 host state: *** Jun 30 10:54:19.165866 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Not tainted ]---- Jun 30 10:54:19.165916 (XEN) CPU: 1 Jun 30 10:54:19.165955 (XEN) PC: 0025ef7c domain.c#idle_loop+0x130/0x1ac Jun 30 10:54:19.177803 (XEN) CPSR: 600e005a MODE:Hypervisor Jun 30 10:54:19.177815 (XEN) R0: 00000000 R1: 0029f300 R2: 3fd0e000 R3: 00000000 Jun 30 10:54:19.189847 (XEN) R4: 00000001 R5: 002f80e0 R6: 0032b324 R7: 00000002 Jun 30 10:54:19.189889 (XEN) R8: 0032b104 R9: 00000001 R10:40e00000 R11:4000ff54 R12:fffffffc Jun 30 10:54:19.201772 (XEN) HYP: SP: 4000ff44 LR: 00225cb8 Jun 30 10:54:19.201830 (XEN) Jun 30 10:54:19.201862 (XEN) VTCR_EL2: 80003558 Jun 30 10:54:19.201905 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 10:54:19.201948 (XEN) Jun 30 10:54:19.201986 (XEN) SCTLR_EL2: 30cd187f Jun 30 10:54:19.213770 (XEN) HCR_EL2: 007c663f Jun 30 10:54:19.213841 (XEN) TTBR0_EL2: 00000000ba004000 Jun 30 10:54:19.213862 (XEN) Jun 30 10:54:19.213901 (XEN) ESR_EL2: 07e00000 Jun 30 10:54:19.213942 (XEN) HPFAR_EL2: 00104810 Jun 30 10:54:19.225832 (XEN) HDFAR: e0807f00 Jun 30 10:54:19.225882 (XEN) HIFAR: c0ac9320 Jun 30 10:54:19.225926 (XEN) Jun 30 10:54:19.225964 (XEN) Xen stack trace from sp=4000ff44: Jun 30 10:54:19.226009 (XEN) 07e00000 002f9290 00000001 4000ff3c 002680f4 00000000 00000000 00000000 Jun 30 10:54:19.240879 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 10:54:19.240879 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 10:54:19.252778 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 10:54:19.252810 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 10:54:19.261735 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 10:54:19.273832 (XEN) Xen call trace: Jun 30 10:54:19.273898 (XEN) [<0025ef7c>] domain.c#idle_loop+0x130/0x1ac (PC) Jun 30 10:54:19.273937 (XEN) [<00225cb8>] rcu_needs_cpu+0x40/0x60 (LR) Jun 30 10:54:19.285804 (XEN) [<002680f4>] start_secondary+0x204/0x20c Jun 30 10:54:19.285871 (XEN) Jun 30 10:54:19.285914 Jun 30 10:54:21.008635 (XEN) 'e' pressed -> dumping event-channel info Jun 30 10:54:21.029858 (XEN) Event channel information for domain 0: Jun 30 10:54:21.029858 (XEN) Polling vCPUs: {} Jun 30 10:54:21.029858 (XEN) port Jun 30 10:54:21.032131 [p/m/s] Jun 30 10:54:21.041644 (XEN) 1 [0/0/ - ]: s=3 n=1 x=0 d=0 p=4 Jun 30 10:54:21.041644 (XEN) 2 [0/0/ - ]: s=5 n=0 x=0 v=2 Jun 30 10:54:21.041644 (XEN) 3 [0/0/ - ]: s=5 n=1 x=0 v=3 Jun 30 10:54:21.053568 (XEN) 4 [0/0/ - ]: s=3 n=0 x=0 d=0 p=1 Jun 30 10:54:21.053568 Jun 30 10:54:23.040887 (XEN) gnttab_usage_print_all [ key 'g' pressed Jun 30 10:54:23.057798 (XEN) -------- active -------- -------- shared -------- Jun 30 10:54:23.057859 (XEN) [ref] localdo Jun 30 10:54:23.060215 m mfn pin localdom gmfn flags Jun 30 10:54:23.069713 (XEN) grant-table for remote d0 (v1) Jun 30 10:54:23.069769 (XEN) 1 frames (64 max), 0 maptrack frames (1024 max) Jun 30 10:54:23.081703 (XEN) no active grant table entries Jun 30 10:54:23.081761 (XEN) gnttab_usage_print_all ] done Jun 30 10:54:23.081805 Jun 30 10:54:25.033140 Jun 30 10:54:26.794420 Jun 30 10:54:27.029559 (XEN) Physical memory information: Jun 30 10:54:27.053767 (XEN) Xen heap: 65136kB free Jun 30 10:54:27.053849 (XEN) heap[19]: 523332kB free Jun 30 10:54:27.053893 (XEN) heap[20]: 966504kB fr Jun 30 10:54:27.055191 ee Jun 30 10:54:27.065672 (XEN) Dom heap: 1489836kB free Jun 30 10:54:27.065727 Jun 30 10:54:29.041312 Jun 30 10:54:30.802352 Jun 30 10:54:31.049778 (XEN) sched_smt_power_savings: disabled Jun 30 10:54:31.073863 (XEN) NOW=425197322458 Jun 30 10:54:31.073919 (XEN) Online Cpus: 0-1 Jun 30 10:54:31.073961 (XEN) Cpupool 0: Jun 30 10:54:31.074001 (XEN) Cpus: 0-1 Jun 30 10:54:31.074040 (XEN) Schedul Jun 30 10:54:31.076314 ing granularity: cpu, 1 CPU per sched-resource Jun 30 10:54:31.085814 (XEN) Scheduler: SMP Credit Scheduler rev2 (credit2) Jun 30 10:54:31.085873 (XEN) Active queues: 1 Jun 30 10:54:31.085915 (XEN) default-weight = 256 Jun 30 10:54:31.097873 (XEN) Runqueue 0: Jun 30 10:54:31.097928 (XEN) ncpus = 2 Jun 30 10:54:31.097972 (XEN) cpus = 0-1 Jun 30 10:54:31.098015 (XEN) max_weight = 256 Jun 30 10:54:31.098057 (XEN) pick_bias = 0 Jun 30 10:54:31.109764 (XEN) instload = 0 Jun 30 10:54:31.109819 (XEN) aveload = 480 (~0%) Jun 30 10:54:31.109863 (XEN) idlers: 2 Jun 30 10:54:31.109903 (XEN) tickled: 0 Jun 30 10:54:31.109942 (XEN) fully idle cores: 2 Jun 30 10:54:31.121756 (XEN) Domain info: Jun 30 10:54:31.121810 (XEN) Domain: 0 w 256 c 0 v 2 Jun 30 10:54:31.121853 (XEN) 1: [0.0] flags=0 cpu=0 credit=4178731 [w=256] load=320 (~0%) Jun 30 10:54:31.133772 (XEN) 2: [0.1] flags=0 cpu=1 credit=6595287 [w=256] load=227 (~0%) Jun 30 10:54:31.133835 (XEN) Runqueue 0: Jun 30 10:54:31.133876 (XEN) CPU[00] runq=0, sibling={0}, core={0-1} Jun 30 10:54:31.145748 (XEN) CPU[01] runq=0, sibling={1}, core={0-1} Jun 30 10:54:31.145807 (XEN) RUNQ: Jun 30 10:54:31.145846 (XEN) CPUs info: Jun 30 10:54:31.145886 (XEN) CPU[00] current=d[IDLE]v0, curr=d[IDLE]v0, prev=NULL Jun 30 10:54:31.157722 (XEN) CPU[01] current=d[IDLE]v1, curr=d[IDLE]v1, prev=NULL Jun 30 10:54:31.157783 Jun 30 10:54:33.037561 Jun 30 10:54:34.807412 Jun 30 10:54:35.047458 (XEN) Synced stime skew: max=125ns avg=125ns samples=1 current=125ns Jun 30 10:54:35.073752 (XEN) Synced cycles skew: max=1 avg=1 samples=1 current=1 Jun 30 10:54:35.073808 Jun 30 10:54:35.075940 Jun 30 10:54:37.045054 Jun 30 10:54:38.813782 Jun 30 10:54:39.090038 Jun 30 10:54:40.856037 Jun 30 10:54:41.093901 Jun 30 10:54:42.862427 Jun 30 10:54:53.104805 (XEN) 'q' pressed -> dumping domain info (now = 447245543750) Jun 30 10:54:53.121831 (XEN) General information for domain 0: Jun 30 10:54:53.121892 (XEN) refcnt=3 dying=0 pause Jun 30 10:54:53.124251 _count=0 Jun 30 10:54:53.133707 (XEN) nr_pages=131072 xenheap_pages=2 dirty_cpus={} max_pages=131072 Jun 30 10:54:53.133769 (XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=00000020 Jun 30 10:54:53.145686 (XEN) p2m mappings for domain 0 (vmid 1): Jun 30 10:54:53.145739 (XEN) 1G mappings: 0 (shattered 0) Jun 30 10:54:53.145784 (XEN) 2M mappings: 255 (shattered 1) Jun 30 10:54:53.157692 (XEN) 4K mappings: 944 Jun 30 10:54:53.157741 (XEN) Rangesets belonging to domain 0: Jun 30 10:54:53.157785 (XEN) Interrupts { 32-72, 74, 77-79, 82-84, 86, 88-100, 103-104, 107-110, 114, 116-120, 123, 126-128, 138, 144, 146-147, 149-151, 156 } Jun 30 10:54:53.169629 (XEN) I/O Memory { 2020-2050, 3810-3811, 3830-3831, 3860-3861, 10000-10001, 10010-10045, 10050-10055, 10060-10061, 101b0-101b1, 101d0-101d1, 101e0-101e1, 10440-10441, 10800-10801, 10830-10831, 10850-10851, 10a60-10a61, 10d10-10d11, 11000-11010, 11200-11201, 11210-11211, 11400-11401, 11800-11805, 11c00-11c01, 11c10-11c11, 11d40-11d41, 11f20-11f21, 12000-12010, 12100-12101, 12110-12111, 12120-12121, 12130-12131, 12170-12171, 121a0-121a1, 121b0-121b1, 121d0-121d1, 12200-12201, 12210-12211, 12220-12221, 12230-12231, 12250-12251, 122f0-122f1, 12c00-12c01, 12c10-12c11, 12c30-12c31, 12c60-12c61, 12c70-12c71, 12c80-12c81, 12c90-12c91, 12ca0-12ca1, 12cb0-12cb1, 12cc0-12cc1, 12cd0-12cd1, 12ce0-12ce1, 12d10-12d11, 12d20-12d21, 12d30-12d31, 12d40-12d41, 12d60-12d61, 12d70-12d71, 12dd0-12dd1, 13260-13261, 13270-13271, 13280-13281, 13290-13291, 132a0-132a1, 132b0-132b1, 132c0-132c1, 132d0-132d1, 132e0-132e1, 132f0-132f1, 13400-13401, 13c40-13c41, 13c50-13c51, 13e00-13e01, 13e10-13e11, 13e20-13e21, 13e30-13e31, 13e80-13e81, 13e90-13e91, 13ea0-13ea1, 13eb0-13eb1, 14400-14440, 14450-14460, 14500-14510, 14530-145a0, 145b0-145b1, 14640-14641, 14650-14651 } Jun 30 10:54:53.265766 (XEN) NODE affinity for domain 0: [0] Jun 30 10:54:53.277741 (XEN) VCPU information and callbacks for domain 0: Jun 30 10:54:53.277802 (XEN) UNIT0 affinities: hard={0-1} soft={0-1} Jun 30 10:54:53.277849 (XEN) VCPU0: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Jun 30 10:54:53.289633 (XEN) pause_count=0 pause_flags=1 Jun 30 10:54:53.289665 (XEN) GICH_LRs (vcpu 0) mask=0 Jun 30 10:54:53.289690 (XEN) VCPU_LR[0]=0 Jun 30 10:54:53.301746 (XEN) VCPU_LR[1]=0 Jun 30 10:54:53.301801 (XEN) VCPU_LR[2]=0 Jun 30 10:54:53.301843 (XEN) VCPU_LR[3]=0 Jun 30 10:54:53.301884 (XEN) No periodic timer Jun 30 10:54:53.301925 (XEN) UNIT1 affinities: hard={0-1} soft={0-1} Jun 30 10:54:53.313629 (XEN) VCPU1: CPU1 [has=T] poll=0 upcall_pend=00 upcall_mask=00 Jun 30 10:54:53.313664 (XEN) pause_count=0 pause_flags=1 Jun 30 10:54:53.313688 (XEN) GICH_LRs (vcpu 1) mask=0 Jun 30 10:54:53.325713 (XEN) VCPU_LR[0]=0 Jun 30 10:54:53.325769 (XEN) VCPU_LR[1]=0 Jun 30 10:54:53.325811 (XEN) VCPU_LR[2]=0 Jun 30 10:54:53.325852 (XEN) VCPU_LR[3]=0 Jun 30 10:54:53.325892 (XEN) No periodic timer Jun 30 10:54:53.325933 (XEN) Notifying guest 0:0 (virq 1, port 0) Jun 30 10:54:53.337632 (XEN) Notifying guest 0:1 (virq 1, port 0) Jun 30 10:54:53.337664 Jun 30 10:55:05.098859 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 30 10:55:05.129799 Jun 30 10:55:05.129849 arndale-metrocentre login: Jun 30 10:55:05.131311 Jun 30 10:56:55.025737 Jun 30 10:56:55.025830 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 10:56:55.025887 Jun 30 10:56:55.025927 CPU: Exynos5250@1000MHz Jun 30 10:56:55.037729 Jun 30 10:56:55.037781 Board: Arndale Jun 30 10:56:55.037823 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 10:56:55.037870 ready Jun 30 10:56:55.037909 DRAM: 2 GiB Jun 30 10:56:55.037948 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 10:56:55.061705 trace: enabled Jun 30 10:56:55.097690 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 10:56:55.457756 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 10:56:55.517775 In: serial Jun 30 10:56:55.517830 Out: serial Jun 30 10:56:55.517872 Err: serial Jun 30 10:56:55.517912 SCSI: ARNDALE SCSI INIT Jun 30 10:56:55.517953 Target spinup took 0 ms. Jun 30 10:56:55.529755 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 10:56:55.529817 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 10:56:55.529865 Net: Net Initialization Skipped Jun 30 10:56:55.541744 No ethernet found. Jun 30 10:56:55.541799 Hostname: arndale-metrocentre Jun 30 10:56:55.541843 Hit any key to stop autoboot: 2  1  0 Jun 30 10:56:57.469703 (Re)start USB... Jun 30 10:56:57.469764 USB0: USB EHCI 1.00 Jun 30 10:56:57.469799 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 10:57:03.065717 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 10:57:03.077735 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 10:57:03.521721 Waiting for Ethernet connection... done. Jun 30 10:57:05.121852 BOOTP broadcast 1 Jun 30 10:57:05.121916 BOOTP broadcast 2 Jun 30 10:57:06.681757 DHCP client bound to address 10.149.64.44 (1625 ms) Jun 30 10:57:06.681830 Using asx0 device Jun 30 10:57:06.681873 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 10:57:06.693721 Filename 'pxelinux.0'. Jun 30 10:57:06.693778 Load address: 0x43e00000 Jun 30 10:57:06.693822 Loading: *### Jun 30 10:57:06.705678 2.2 MiB/s Jun 30 10:57:06.717742 done Jun 30 10:57:06.717795 Bytes transferred = 42430 (a5be hex) Jun 30 10:57:06.717842 missing environment variable: pxeuuid Jun 30 10:57:06.717887 Retrieving file: pxelinux.cfg/0A95402C Jun 30 10:57:06.717931 Using asx0 device Jun 30 10:57:06.729743 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 10:57:06.729806 Filename 'pxelinux.cfg/0A95402C'. Jun 30 10:57:06.729852 Load address: 0x51000000 Jun 30 10:57:06.729894 Loading: *# Jun 30 10:57:06.741747 31.3 KiB/s Jun 30 10:57:06.741802 done Jun 30 10:57:06.741843 Bytes transferred = 65 (41 hex) Jun 30 10:57:06.741887 Config file found Jun 30 10:57:06.741928 Ignoring unknown command: serial Jun 30 10:57:06.741971 1: local Jun 30 10:57:06.742010 scanning bus for devices... Jun 30 10:57:06.753801 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 10:57:06.765692 Type: Hard Disk Jun 30 10:57:06.765746 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 10:57:06.777717 Found 1 device(s). Jun 30 10:57:06.777772 Jun 30 10:57:06.777812 SCSI device 0: Jun 30 10:57:06.777852 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 10:57:06.789757 Type: Hard Disk Jun 30 10:57:06.789814 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 10:57:06.789864 ... is now current device Jun 30 10:57:06.801685 Scanning scsi 0... Jun 30 10:57:06.801741 Found U-Boot script /boot.scr Jun 30 10:57:06.981694 1768 bytes read in 44 ms (39.1 KiB/s) Jun 30 10:57:07.029772 ## Executing script at 50000000 Jun 30 10:57:07.029830 Loading dtbs/6.10.0-rc5+/exynos5250-arndale.dtb Jun 30 10:57:07.029876 46641 bytes read in 3724 ms (11.7 KiB/s) Jun 30 10:57:10.629766 983052 bytes read in 106 ms (8.8 MiB/s) Jun 30 10:57:10.761711 Loaded xen-4.19-unstable to 0x41000000 (f000c) Jun 30 10:57:10.761746 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan Jun 30 10:57:10.773670 10785280 bytes read in 507 ms (20.3 MiB/s) Jun 30 10:57:11.277860 Loaded vmlinuz-6.10.0-rc5+ to 0x42000000 (a49200) Jun 30 10:57:11.277942 command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 10:57:11.301707 12142342 bytes read in 577 ms (20.1 MiB/s) Jun 30 10:57:11.877650 Loaded initrd.img-6.10.0-rc5+ to 0x43300000 (b94706) Jun 30 10:57:11.877692 chosen { Jun 30 10:57:11.889763 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan"; Jun 30 10:57:11.889840 #size-cells = <0x00000001>; Jun 30 10:57:11.901742 #address-cells = <0x00000001>; Jun 30 10:57:11.901799 stdout-path = "serial2:115200n8"; Jun 30 10:57:11.901844 module@1 { Jun 30 10:57:11.901883 reg = <0x43300000 0x00b94706>; Jun 30 10:57:11.901925 compatible = "xen,linux-initrd", "xen,multiboot-module"; Jun 30 10:57:11.913745 }; Jun 30 10:57:11.913795 module@0 { Jun 30 10:57:11.913835 bootargs = "ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Jun 30 10:57:11.925763 reg = <0x42000000 0x00a49200>; Jun 30 10:57:11.937790 compatible = "xen,linux-zimage", "xen,multiboot-module"; Jun 30 10:57:11.937852 }; Jun 30 10:57:11.937891 }; Jun 30 10:57:11.937928 Booting 0x41000000 - 0x43000000 Jun 30 10:57:11.937970 Kernel image @ 0x41000000 [ 0x000000 - 0x12f000 ] Jun 30 10:57:11.949739 ## Flattened Device Tree blob at 43000000 Jun 30 10:57:11.949797 Booting using the fdt blob at 0x43000000 Jun 30 10:57:11.949842 reserving fdt memory region: addr=43000000 size=c000 Jun 30 10:57:11.961740 Loading Device Tree to 4fff1000, end 4fffffff ... OK Jun 30 10:57:11.961800 Jun 30 10:57:11.973706 Starting kernel ...(fake run for tracing) Jun 30 10:57:11.973766 Jun 30 10:57:11.973805 Jun 30 10:57:11.973843 Starting kernel ... Jun 30 10:57:11.973882 Jun 30 10:57:11.973918 __ __ _ _ _ ___ _ _ _ Jun 30 10:57:12.021718 \ \/ /___ _ __ | || | / |/ _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Jun 30 10:57:12.033752 \ // _ \ '_ \ | || |_ | | (_) |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Jun 30 10:57:12.045797 / \ __/ | | | |__ _|| |\__, |__| |_| | | | \__ \ || (_| | |_) | | __/ Jun 30 10:57:12.045859 /_/\_\___|_| |_| |_|(_)_| /_/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Jun 30 10:57:12.057733 Jun 30 10:57:12.057784 (XEN) Xen version 4.19-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Sun Jun 30 09:16:28 UTC 2024 Jun 30 10:57:12.069748 (XEN) Latest ChangeSet: Wed Jun 26 16:07:30 2024 +0100 git:08f9b1dd9c Jun 30 10:57:12.069811 (XEN) build-id: 49321b95d54bf04a04497dcfff6064128f8c8a55 Jun 30 10:57:12.081793 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Jun 30 10:57:12.081859 (XEN) 32-bit Execution: Jun 30 10:57:12.081902 (XEN) Processor Features: 00001031:00011011 Jun 30 10:57:12.093730 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Jun 30 10:57:12.093792 (XEN) Extensions: GenericTimer Security Jun 30 10:57:12.093837 (XEN) Debug Features: 02010555 Jun 30 10:57:12.105743 (XEN) Auxiliary Features: 00000000 Jun 30 10:57:12.105801 (XEN) Memory Model Features: 10201105 20000000 Jun 30 10:57:12.105847 (XEN) 01240000 02102211 Jun 30 10:57:12.117763 (XEN) ISA Features: 02101110 13112111 21232041 Jun 30 10:57:12.117825 (XEN) 11112131 10011142 00000000 Jun 30 10:57:12.117869 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Jun 30 10:57:12.129776 (XEN) Set SYSRAM to 0000000041000074 (00200074) Jun 30 10:57:12.141738 (XEN) SMP: Allowing 2 CPUs Jun 30 10:57:12.141795 (XEN) enabled workaround for: ARM erratum 766422 Jun 30 10:57:12.141842 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Jun 30 10:57:12.153795 (XEN) GICv2 initialization: Jun 30 10:57:12.153850 (XEN) gic_dist_addr=0000000010481000 Jun 30 10:57:12.153896 (XEN) gic_cpu_addr=0000000010482000 Jun 30 10:57:12.165753 (XEN) gic_hyp_addr=0000000010484000 Jun 30 10:57:12.165811 (XEN) gic_vcpu_addr=0000000010486000 Jun 30 10:57:12.165856 (XEN) gic_maintenance_irq=25 Jun 30 10:57:12.177738 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Jun 30 10:57:12.177799 (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2) Jun 30 10:57:12.177846 (XEN) Initializing Credit2 scheduler Jun 30 10:57:12.189739 (XEN) load_precision_shift: 18 Jun 30 10:57:12.189796 (XEN) load_window_shift: 30 Jun 30 10:57:12.189838 (XEN) underload_balance_tolerance: 0 Jun 30 10:57:12.189881 (XEN) overload_balance_tolerance: -3 Jun 30 10:57:12.201743 (XEN) runqueues arrangement: socket Jun 30 10:57:12.201800 (XEN) cap enforcement granularity: 10ms Jun 30 10:57:12.201845 (XEN) load tracking window length 1073741824 ns Jun 30 10:57:12.213795 (XEN) Allocated console ring of 16 KiB. Jun 30 10:57:12.213853 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Jun 30 10:57:12.213904 (XEN) CPU0: Guest atomics will try 1 times before pausing the domain Jun 30 10:57:12.225754 (XEN) Bringing up CPU1 Jun 30 10:57:12.225808 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Jun 30 10:57:12.237743 (XEN) Brought up 2 CPUs Jun 30 10:57:12.237798 (XEN) CPU 1 booted. Jun 30 10:57:12.237839 (XEN) I/O virtualisation disabled Jun 30 10:57:12.237882 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Jun 30 10:57:12.249739 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Jun 30 10:57:12.249799 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Jun 30 10:57:12.249848 (XEN) Initializing Credit2 scheduler Jun 30 10:57:12.261785 (XEN) load_precision_shift: 18 Jun 30 10:57:12.261842 (XEN) load_window_shift: 30 Jun 30 10:57:12.261884 (XEN) underload_balance_tolerance: 0 Jun 30 10:57:12.261927 (XEN) overload_balance_tolerance: -3 Jun 30 10:57:12.273760 (XEN) runqueues arrangement: socket Jun 30 10:57:12.273816 (XEN) cap enforcement granularity: 10ms Jun 30 10:57:12.273872 (XEN) load tracking window length 1073741824 ns Jun 30 10:57:12.285741 (XEN) Adding cpu 0 to runqueue 0 Jun 30 10:57:12.285802 (XEN) First cpu on runqueue, activating Jun 30 10:57:12.285848 (XEN) Adding cpu 1 to runqueue 0 Jun 30 10:57:12.285890 (XEN) alternatives: Patching with alt table 002c2f84 -> 002c305c Jun 30 10:57:12.297750 (XEN) CPU0 will execute ICIALLU on guest exit Jun 30 10:57:12.297808 (XEN) CPU1 will execute ICIALLU on guest exit Jun 30 10:57:12.309746 (XEN) *** LOADING DOMAIN 0 *** Jun 30 10:57:12.309803 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Jun 30 10:57:12.309851 (XEN) Loading ramdisk from boot module @ 0000000043300000 Jun 30 10:57:12.321841 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Jun 30 10:57:12.321896 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Jun 30 10:57:12.885747 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Jun 30 10:57:12.897676 (XEN) Allocating PPI 16 for event channel interrupt Jun 30 10:57:12.921775 (XEN) d0: extended regions not supported for 32-bit guests Jun 30 10:57:12.921835 (XEN) Loading zImage from 0000000042000000 to 0000000067400000-0000000067e49200 Jun 30 10:57:12.933744 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d94706 Jun 30 10:57:13.029749 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b499 Jun 30 10:57:13.137709 (XEN) Initial low memory virq threshold set at 0x4000 pages. Jun 30 10:57:13.137771 (XEN) Scrubbing Free RAM in background Jun 30 10:57:13.137816 (XEN) Std. Loglevel: All Jun 30 10:57:13.137858 (XEN) Guest Loglevel: All Jun 30 10:57:13.149788 (XEN) *************************************************** Jun 30 10:57:13.149847 (XEN) WARNING: SILO mode is not enabled. Jun 30 10:57:13.149893 (XEN) It has implications on the security of the system, Jun 30 10:57:13.161787 (XEN) unless the communications have been forbidden between Jun 30 10:57:13.161830 (XEN) untrusted domains. Jun 30 10:57:13.161872 (XEN) *************************************************** Jun 30 10:57:13.173704 (XEN) 3... 2... 1... Jun 30 10:57:16.173741 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 30 10:57:16.196240 (XEN) Freed 352kB init memory. Jun 30 10:57:16.196280 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 10:57:17.317681 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Jun 30 10:57:17.329733 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Jun 30 10:57:17.341739 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Jun 30 10:57:17.341801 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Jun 30 10:57:17.353726 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 10:57:17.353787 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 10:57:17.401739 [ 0.000000] Linux version 6.10.0-rc5+ (osstest@himrod1) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Sun Jun 30 08:10:22 UTC 2024 Jun 30 10:57:17.413760 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 30 10:57:17.413824 [ 0.000000] CPU: div instructions available: patching division code Jun 30 10:57:17.425741 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 10:57:17.437762 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 10:57:17.437831 [ 0.000000] Memory policy: Data cache writealloc Jun 30 10:57:17.449695 [ 0.000000] Xen 4.19 support found Jun 30 10:57:17.449740 [ 0.000000] efi: UEFI not found. Jun 30 10:57:17.449769 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 on node -1 Jun 30 10:57:17.461748 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 10:57:17.461805 [ 0.000000] Zone ranges: Jun 30 10:57:17.461848 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Jun 30 10:57:17.473744 [ 0.000000] Normal empty Jun 30 10:57:17.473799 [ 0.000000] HighMem empty Jun 30 10:57:17.473842 [ 0.000000] Movable zone start for each node Jun 30 10:57:17.485791 [ 0.000000] Early memory node ranges Jun 30 10:57:17.485849 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Jun 30 10:57:17.485898 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Jun 30 10:57:17.497793 [ 0.000000] psci: probing for conduit method from DT. Jun 30 10:57:17.497853 [ 0.000000] psci: PSCIv1.1 detected in firmware. Jun 30 10:57:17.509892 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Jun 30 10:57:17.509940 [ 0.000000] psci: Trusted OS migration not required Jun 30 10:57:17.521782 [ 0.000000] psci: SMC Calling Convention v1.2 Jun 30 10:57:17.521841 [ 0.000000] percpu: Embedded 18 pages/cpu s41428 r8192 d24108 u73728 Jun 30 10:57:17.533743 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 10:57:17.545774 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 10:57:17.557761 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Jun 30 10:57:17.557848 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 131072 Jun 30 10:57:17.569757 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Jun 30 10:57:17.581734 [ 0.000000] Memory: 414600K/524288K available (15360K kernel code, 2268K rwdata, 6084K rodata, 2048K init, 439K bss, 44152K reserved, 65536K cma-reserved, 0K highmem) Jun 30 10:57:17.593789 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 10:57:17.593852 [ 0.000000] trace event string verifier disabled Jun 30 10:57:17.605755 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 10:57:17.605814 [ 0.000000] rcu: RCU event tracing is enabled. Jun 30 10:57:17.617728 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Jun 30 10:57:17.617794 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Jun 30 10:57:17.629752 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 10:57:17.629815 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 10:57:17.641750 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 10:57:17.641813 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 10:57:17.653764 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Jun 30 10:57:17.653827 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 10:57:17.665848 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 10:57:17.677933 [ 0.000013] Switching to timer-based delay loop, resolution 41ns Jun 30 10:57:17.677966 [ 0.000510] Console: colour dummy device 80x30 Jun 30 10:57:17.689839 [ 0.000528] printk: legacy console [hvc0] enabled Jun 30 10:57:17.689903 [ 0.299524] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Jun 30 10:57:17.701981 [ 0.309922] CPU: Testing write buffer coherency: ok Jun 30 10:57:17.702040 [ 0.314864] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 10:57:17.713959 [ 0.324417] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 10:57:17.725952 [ 0.330850] pid_max: default: 32768 minimum: 301 Jun 30 10:57:17.726012 [ 0.335616] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 10:57:17.737751 [ 0.342898] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 10:57:17.737818 [ 0.351313] /cpus/cpu@0 missing clock-frequency property Jun 30 10:57:17.749786 [ 0.356101] /cpus/cpu@1 missing clock-frequency property Jun 30 10:57:17.749862 [ 0.361518] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 10:57:17.761847 [ 0.368222] xen:grant_table: Grant tables using version 1 layout Jun 30 10:57:17.761907 [ 0.373350] Grant table initialized Jun 30 10:57:17.773921 [ 0.376905] xen:events: Using FIFO-based ABI Jun 30 10:57:17.773977 [ 0.381205] Xen: initializing cpu0 Jun 30 10:57:17.774022 [ 0.384727] Setting up static identity map for 0x60300000 - 0x603000ac Jun 30 10:57:17.785919 [ 0.392509] rcu: Hierarchical SRCU implementation. Jun 30 10:57:17.785963 [ 0.396121] rcu: Max phase no-delay instances is 1000. Jun 30 10:57:17.797739 [ 0.404354] EFI services will not be available. Jun 30 10:57:17.797798 [ 0.407672] smp: Bringing up secondary CPUs ... Jun 30 10:57:17.809695 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 10:57:17.869706 [ 0.481922] Xen: initializing cpu1 Jun 30 10:57:17.881736 [ 0.482082] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 10:57:17.881797 [ 0.482106] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 10:57:17.893777 [ 0.501092] smp: Brought up 1 node, 2 CPUs Jun 30 10:57:17.893836 [ 0.504735] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 10:57:17.905755 [ 0.511021] CPU: All CPU(s) started in SVC mode. Jun 30 10:57:17.905814 [ 0.516928] devtmpfs: initialized Jun 30 10:57:17.905878 [ 0.529459] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 10:57:17.929893 [ 0.536008] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Jun 30 10:57:17.941735 [ 0.545684] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 10:57:17.941799 [ 0.553604] pinctrl core: initialized pinctrl subsystem Jun 30 10:57:17.953730 [ 0.560213] DMI not present or invalid. Jun 30 10:57:17.953788 [ 0.563724] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 10:57:17.965725 [ 0.570346] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 10:57:17.965789 [ 0.579663] thermal_sys: Registered thermal governor 'step_wise' Jun 30 10:57:17.977748 [ 0.579821] software IO TLB: area num 2. Jun 30 10:57:17.977806 [ 0.588495] software IO TLB: only able to allocate 8 MB Jun 30 10:57:17.989703 [ 0.595568] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Jun 30 10:57:17.989759 [ 0.600771] No ATAGs? Jun 30 10:57:17.989800 [ 0.603075] hw-breakpoint: Failed to enable monitor mode on CPU 0. Jun 30 10:57:18.001736 [ 0.611774] Serial: AMBA PL011 UART driver Jun 30 10:57:18.001795 [ 0.658392] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 65 Jun 30 10:57:18.061676 [ 0.686835] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 30 10:57:18.085726 [ 0.710762] xen:balloon: Initialising balloon driver Jun 30 10:57:18.109736 [ 0.717213] iommu: Default domain type: Translated Jun 30 10:57:18.109796 [ 0.720623] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 10:57:18.121793 [ 0.729423] SCSI subsystem initialized Jun 30 10:57:18.121851 [ 0.732190] usbcore: registered new interface driver usbfs Jun 30 10:57:18.133743 [ 0.737422] usbcore: registered new interface driver hub Jun 30 10:57:18.133803 [ 0.742760] usbcore: registered new device driver usb Jun 30 10:57:18.145792 [ 0.749480] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 10:57:18.145853 [ 0.753073] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 10:57:18.145902 [ 0.759327] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 10:57:18.157751 [ 0.764391] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 10:57:18.157810 [ 0.769324] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 10:57:18.169744 [ 0.775363] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 10:57:18.169804 [ 0.781139] pps_core: LinuxPPS API ver. 1 registered Jun 30 10:57:18.181746 [ 0.785532] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 10:57:18.181818 [ 0.794759] PTP clock support registered Jun 30 10:57:18.193766 [ 0.798994] EDAC MC: Ver: 3.0.0 Jun 30 10:57:18.193824 [ 0.802253] scmi_core: SCMI protocol bus registered Jun 30 10:57:18.193871 [ 0.808945] vgaarb: loaded Jun 30 10:57:18.205741 [ 0.812221] clocksource: Switched to clocksource arch_sys_counter Jun 30 10:57:18.205803 [ 0.829116] NET: Registered PF_INET protocol family Jun 30 10:57:18.229747 [ 0.832775] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Jun 30 10:57:18.229815 [ 0.840657] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 10:57:18.241881 [ 0.848378] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 10:57:18.253914 [ 0.856162] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Jun 30 10:57:18.253980 [ 0.863995] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Jun 30 10:57:18.265875 [ 0.871272] TCP: Hash tables configured (established 4096 bind 4096) Jun 30 10:57:18.265960 [ 0.877647] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 10:57:18.277862 [ 0.884215] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 10:57:18.277927 [ 0.891312] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 10:57:18.289883 [ 0.897472] RPC: Registered named UNIX socket transport module. Jun 30 10:57:18.289931 [ 0.902949] RPC: Registered udp transport module. Jun 30 10:57:18.301869 [ 0.907703] RPC: Registered tcp transport module. Jun 30 10:57:18.301928 [ 0.912500] RPC: Registered tcp-with-tls transport module. Jun 30 10:57:18.313842 [ 0.918052] RPC: Registered tcp NFSv4.1 backchannel transport module. Jun 30 10:57:18.313906 [ 0.924563] PCI: CLS 0 bytes, default 64 Jun 30 10:57:18.325734 [ 0.929961] Initialise system trusted keyrings Jun 30 10:57:18.325788 [ 0.933283] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Jun 30 10:57:18.337762 [ 0.939805] squashfs: version 4.0 (2009/01/31) Phillip Lougher Jun 30 10:57:18.337826 [ 0.945687] NFS: Registering the id_resolver key type Jun 30 10:57:18.337874 [ 0.950626] Key type id_resolver registered Jun 30 10:57:18.349695 [ 0.954850] Key type id_legacy registered Jun 30 10:57:18.349753 [ 0.958954] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Jun 30 10:57:18.361736 [ 0.965711] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Jun 30 10:57:18.361804 [ 0.973419] Trying to unpack rootfs image as initramfs... Jun 30 10:57:18.373674 [ 0.995010] Key type asymmetric registered Jun 30 10:57:18.385711 [ 0.997748] Asymmetric key parser 'x509' registered Jun 30 10:57:18.397743 [ 1.002812] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) Jun 30 10:57:18.397812 [ 1.010160] io scheduler mq-deadline registered Jun 30 10:57:18.409798 [ 1.014780] io scheduler kyber registered Jun 30 10:57:18.409856 [ 1.018887] io scheduler bfq registered Jun 30 10:57:18.409900 [ 1.160149] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 10:57:18.553720 [ 1.166403] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 10:57:18.565821 [ 1.220466] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 10:57:18.613805 [ 1.226738] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 10:57:18.625776 [ 1.254997] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 10:57:18.649779 [ 1.261248] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 10:57:18.661735 [ 1.304291] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 10:57:18.697744 [ 1.310493] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 10:57:18.709761 [ 1.322845] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 10:57:18.721740 [ 1.396544] xen:xen_evtchn: Event-channel device installed Jun 30 10:57:18.793718 [ 1.467004] Freeing initrd memory: 11860K Jun 30 10:57:18.865682 [ 1.513151] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 10:57:18.913718 [ 1.524160] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 10:57:18.925750 [ 1.532430] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 10:57:18.937743 [ 1.541482] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 10:57:18.937814 [ 1.550258] SuperH (H)SCI(F) driver initialized Jun 30 10:57:18.949764 [ 1.554568] STMicroelectronics ASC driver initialized Jun 30 10:57:18.949846 [ 1.559439] STM32 USART driver initialized Jun 30 10:57:18.961762 [ 1.564954] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 10:57:18.961829 [ 1.573690] random: crng init done Jun 30 10:57:18.973701 [ 1.581381] brd: module loaded Jun 30 10:57:18.973758 [ 1.587304] loop: module loaded Jun 30 10:57:18.985687 [ 1.602883] Invalid max_queues (4), will use default max: 2. Jun 30 10:57:18.997718 [ 1.621464] tun: Universal TUN/TAP device driver, 1.6 Jun 30 10:57:19.021742 [ 1.625337] CAN device driver interface Jun 30 10:57:19.021801 [ 1.630464] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Jun 30 10:57:19.021850 [ 1.641677] xen_netfront: Initialising Xen virtual ethernet driver Jun 30 10:57:19.033721 [ 1.646547] pegasus: Pegasus/Pegasus II USB Ethernet driver Jun 30 10:57:19.045801 [ 1.652145] usbcore: registered new interface driver pegasus Jun 30 10:57:19.045862 [ 1.657885] usbcore: registered new interface driver asix Jun 30 10:57:19.057751 [ 1.663358] usbcore: registered new interface driver ax88179_178a Jun 30 10:57:19.057814 [ 1.669506] usbcore: registered new interface driver cdc_ether Jun 30 10:57:19.069742 [ 1.675419] usbcore: registered new interface driver smsc75xx Jun 30 10:57:19.069804 [ 1.681228] usbcore: registered new interface driver smsc95xx Jun 30 10:57:19.081750 [ 1.687055] usbcore: registered new interface driver net1080 Jun 30 10:57:19.081812 [ 1.692779] usbcore: registered new interface driver cdc_subset Jun 30 10:57:19.093742 [ 1.698754] usbcore: registered new interface driver zaurus Jun 30 10:57:19.093804 [ 1.704414] usbcore: registered new interface driver cdc_ncm Jun 30 10:57:19.105763 [ 1.713785] usbcore: registered new interface driver usb-storage Jun 30 10:57:19.105826 [ 1.724329] i2c_dev: i2c /dev entries driver Jun 30 10:57:19.117694 [ 1.742724] device-mapper: uevent: version 1.0.3 Jun 30 10:57:19.141771 [ 1.746140] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev Jun 30 10:57:19.141843 [ 1.755785] cpu cpu0: OPP table can't be empty Jun 30 10:57:19.153744 [ 1.760481] failed to register cpuidle driver Jun 30 10:57:19.153803 [ 1.763872] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Jun 30 10:57:19.165740 [ 1.772251] sdhci: Secure Digital Host Controller Interface driver Jun 30 10:57:19.165803 [ 1.777214] sdhci: Copyright(c) Pierre Ossman Jun 30 10:57:19.177734 [ 1.785380] sdhci-pltfm: SDHCI platform and OF driver helper Jun 30 10:57:19.177795 [ 1.794338] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 10:57:19.189751 [ 1.799828] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Jun 30 10:57:19.201736 [ 1.806523] usbcore: registered new interface driver usbhid Jun 30 10:57:19.201797 [ 1.811150] usbhid: USB HID core driver Jun 30 10:57:19.201842 [ 1.822063] NET: Registered PF_INET6 protocol family Jun 30 10:57:19.213721 [ 1.826576] Segment Routing with IPv6 Jun 30 10:57:19.225785 [ 1.829415] In-situ OAM (IOAM) with IPv6 Jun 30 10:57:19.225844 [ 1.833491] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Jun 30 10:57:19.237816 [ 1.839865] NET: Registered PF_PACKET protocol family Jun 30 10:57:19.237879 [ 1.844554] can: controller area network core Jun 30 10:57:19.237926 [ 1.848957] NET: Registered PF_CAN protocol family Jun 30 10:57:19.249809 [ 1.853798] can: raw protocol Jun 30 10:57:19.249866 [ 1.856823] can: broadcast manager protocol Jun 30 10:57:19.249912 [ 1.861099] can: netlink gateway - max_hops=1 Jun 30 10:57:19.261838 [ 1.865850] Key type dns_resolver registered Jun 30 10:57:19.261898 [ 1.870545] ThumbEE CPU extension supported. Jun 30 10:57:19.261945 [ 1.874229] Registering SWP/SWPB emulation handler Jun 30 10:57:19.273800 [ 1.888570] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level Jun 30 10:57:19.285835 [ 1.895471] Loading compiled-in X.509 certificates Jun 30 10:57:19.297845 [ 1.938446] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 10:57:19.333836 [ 1.942043] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 10:57:19.345817 [ 1.948669] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 10:57:19.345889 [ 1.956862] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 10:57:19.357817 [ 2.005577] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 10:57:19.405804 [ 2.014422] s5m-rtc s5m-rtc: setting system clock to 2000-01-02T00:00:25 UTC (946771225) Jun 30 10:57:19.417798 [ 2.025397] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 10:57:19.417868 [ 2.029995] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 10:57:19.429781 [ 2.034439] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 10:57:19.429840 [ 2.041162] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 10:57:19.441849 [ 2.047042] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 10:57:19.441913 [ 2.053234] clk: Not disabling unused clocks Jun 30 10:57:19.453748 [ 2.056714] PM: genpd: Disabling unused power domains Jun 30 10:57:19.453827 [ 2.065277] Freeing unused kernel image (initmem) memory: 2048K Jun 30 10:57:19.465710 [ 2.071543] Run /init as init process Jun 30 10:57:19.465768 Loading, please wait... Jun 30 10:57:19.489722 Starting systemd-udevd version 252.26-1~deb12u2 Jun 30 10:57:19.561715 [ 3.386819] i2c-gpio i2c-10: using lines 552 (SDA) and 553 (SCL) Jun 30 10:57:20.789622 [ 3.425287] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 10:57:20.825649 [ 3.479547] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 10:57:20.873729 [ 3.501463] Synopsys Designware Multimedia Card Interface Driver Jun 30 10:57:20.897697 [ 3.531068] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 10:57:20.933697 [ 3.560801] phy phy-12130000.phy.9: phy_power_on was called before phy_init Jun 30 10:57:20.957760 [ 3.566492] exynos-ohci 12120000.usb: USB Host Controller Jun 30 10:57:20.969739 [ 3.571886] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Jun 30 10:57:20.969808 [ 3.581762] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 30 10:57:20.981749 [ 3.582695] phy phy-12130000.phy.9: phy_power_on was called before phy_init Jun 30 10:57:20.981814 [ 3.590086] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 30 10:57:20.993748 [ 3.594354] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 10:57:20.993809 [ 3.607137] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Jun 30 10:57:21.005729 [ 3.635956] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 30 10:57:21.029756 [ 3.642143] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 30 10:57:21.041796 [ 3.649527] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 Jun 30 10:57:21.053778 [ 3.649616] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 30 10:57:21.053848 [ 3.667390] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 30 10:57:21.065835 [ 3.672515] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 30 10:57:21.065897 [ 3.678026] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo Jun 30 10:57:21.077861 [ 3.687872] mmc_host mmc0: card is polling. Jun 30 10:57:21.089754 [ 3.723056] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 10:57:21.125917 [ 3.731191] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 30 10:57:21.125981 [ 3.734891] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 30 10:57:21.137791 [ 3.737737] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 30 10:57:21.137853 [ 3.744856] ahci-dwc 122f0000.sata: AHCI vers 0001.0300, 32 command slots, 6 Gbps, platform mode Jun 30 10:57:21.149808 [ 3.750367] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 127,32 bit host data width,128 deep fifo Jun 30 10:57:21.161855 [ 3.759139] ahci-dwc 122f0000.sata: 1/1 ports implemented (port mask 0x1) Jun 30 10:57:21.173790 [ 3.775566] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 30 10:57:21.173862 [ 3.824213] hub 1-0:1.0: USB hub found Jun 30 10:57:21.221753 [ 3.826328] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 10:57:21.233693 [ 3.838658] hub 1-0:1.0: 3 ports detected Jun 30 10:57:21.233750 [ 3.902610] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 Jun 30 10:57:21.293723 [ 3.908589] scsi host0: ahci-dwc Jun 30 10:57:21.305747 [ 3.913233] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 10:57:21.305807 [ 3.917887] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 128 lpm-pol 0 Jun 30 10:57:21.317750 [ 3.927502] VDD_ALIVE_1.0V: Bringing 1000000uV into 1100000-1100000uV Jun 30 10:57:21.329698 [ 3.941681] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 10:57:21.341714 [ 3.952122] hub 2-0:1.0: USB hub found Jun 30 10:57:21.341771 [ 3.957018] hub 2-0:1.0: 3 ports detected Jun 30 10:57:21.353716 [ 3.980375] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Jun 30 10:57:21.377739 [ 3.986078] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 30 10:57:21.389749 [ 3.990047] s3c-rtc 101e0000.rtc: registered as rtc1 Jun 30 10:57:21.389808 [ 4.002361] mmc0: new DDR MMC card at address 0001 Jun 30 10:57:21.401741 [ 4.006833] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Jun 30 10:57:21.401800 [ 4.013838] mmcblk0: p1 p2 p3 p4 Jun 30 10:57:21.413707 [ 4.017659] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Jun 30 10:57:21.413767 [ 4.027896] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Jun 30 10:57:21.425733 [ 4.033614] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Jun 30 10:57:21.425795 [ 4.096809] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 10:57:21.497750 [ 4.105495] mmc1: new high speed SDHC card at address aaaa Jun 30 10:57:21.497810 [ 4.111874] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Jun 30 10:57:21.509733 [ 4.422353] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 30 10:57:21.821841 [ 4.428731] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 30 10:57:21.821906 [ 4.434139] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 30 10:57:21.833836 [ 4.442909] ata1.00: configured for UDMA/133 Jun 30 10:57:21.833895 [ 4.448851] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 30 10:57:21.845817 [ 4.468775] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 30 10:57:21.869853 [ 4.474934] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 30 10:57:21.869913 [ 4.480340] sd 0:0:0:0: [sda] Write Protect is off Jun 30 10:57:21.881842 [ 4.486305] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 30 10:57:21.881913 [ 4.495134] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 30 10:57:21.893848 [ 4.524262] sda: sda1 sda2 < sda5 > Jun 30 10:57:21.917814 [ 4.526982] sd 0:0:0:0: [sda] Attached SCSI disk Jun 30 10:57:21.917873 [ 4.564391] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Jun 30 10:57:21.965765 [ 4.581682] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 10:57:21.977830 [ 4.586693] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 10:57:21.989823 [ 4.598357] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002000010 Jun 30 10:57:22.001830 [ 4.607972] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Jun 30 10:57:22.001912 [ 4.618787] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 10:57:22.013884 [ 4.623571] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 10:57:22.025917 [ 4.630816] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 10:57:22.025981 [ 4.645916] hub 3-0:1.0: USB hub found Jun 30 10:57:22.037876 [ 4.648472] hub 3-0:1.0: 1 port detected Jun 30 10:57:22.049924 [ 4.653372] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 10:57:22.049994 [ 4.661592] hub 4-0:1.0: USB hub found Jun 30 10:57:22.061874 [ 4.664388] hub 4-0:1.0: 1 port detected Jun 30 10:57:22.061933 [ 4.897882] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 10:57:22.301795 [ 5.071424] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 10:57:22.469825 [ 5.211390] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 10:57:22.613804 [ 5.319712] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 10:57:22.721796 [ 5.428041] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 10:57:22.829821 [ 5.536412] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 10:57:22.937778 [ 5.928980] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 10:57:23.333679 [ 6.101022] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 10:57:23.501716 [ 6.215424] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 10:57:23.609639 [ 6.323191] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 10:57:23.717754 [ 6.430902] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 10:57:23.825750 [ 6.538656] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 10:57:23.933760 [ 6.546273] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 10:57:23.945724 Begin: Loading essential drivers ... done. Jun 30 10:57:24.005764 Begin: Running /scripts/init-premount ... done. Jun 30 10:57:27.017874 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 30 10:57:27.029817 Begin: Running /scripts/local-premount ... done. Jun 30 10:57:27.041757 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 30 10:57:27.125796 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 30 10:57:27.221831 /dev/mapper/arndale--metrocentre--vg-root: recovering journal Jun 30 10:57:27.473756 /dev/mapper/arndale--metrocentre--vg-root: clean, 46076/1220608 files, 606088/4882432 blocks Jun 30 10:57:28.529753 done. Jun 30 10:57:28.541777 [ 11.153952] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 30 10:57:28.553795 [ 11.499015] EXT4-fs (dm-0): mounted filesystem f7502202-a08c-485a-b088-73e644f85daa ro with ordered data mode. Quota mode: disabled. Jun 30 10:57:28.901575 done. Jun 30 10:57:28.901575 Begin: Running /scripts/local-bottom ... done. Jun 30 10:57:28.949642 Begin: Running /scripts/init-bottom ... done. Jun 30 10:57:28.997577 INIT: version 3.06 booting Jun 30 10:57:29.477566 INIT: No inittab.d directory found Jun 30 10:57:29.573698 Using makefile-style concurrent boot in runlevel S. Jun 30 10:57:29.909624 Starting hotplug events dispatcher: systemd-udevd. Jun 30 10:57:31.685707 Synthesizing the initial hotplug events (subsystems)...done. Jun 30 10:57:32.141730 Synthesizing the initial hotplug events (devices)...[ 14.778832] wm8994 3-001a: Device is not a WM8994, ID is 0 Jun 30 10:57:32.177766 [ 14.784680] wm8994 3-001a: probe with driver wm8994 failed with error -22 Jun 30 10:57:32.177830 [ 15.645659] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 30 10:57:33.045733 [ 15.661925] s5p-secss 10830000.sss: s5p-sss driver registered Jun 30 10:57:33.057772 [ 15.674454] mc: Linux media interface: v0.10 Jun 30 10:57:33.069770 done. Jun 30 10:57:33.081749 Waiting for /dev to be fully populated...[ 15.756572] videodev: Linux video capture interface: v2.00 Jun 30 10:57:33.153783 [ 16.006834] s5p-mfc 11000000.codec: Adding to iommu group 0 Jun 30 10:57:33.405761 [ 16.044070] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Jun 30 10:57:33.441804 [ 16.104910] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 10:57:33.501834 [ 16.113708] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 10:57:33.513821 [ 16.121287] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 10:57:33.525781 [ 16.132887] s5p-mfc 11000000.codec: decoder registered as /dev/video0 Jun 30 10:57:33.525843 [ 16.142948] s5p-mfc 11000000.codec: encoder registered as /dev/video1 Jun 30 10:57:33.537790 [ 16.255399] exynos-gsc 13e00000.gsc: Adding to iommu group 1 Jun 30 10:57:33.657802 [ 16.261298] exynos-gsc 13e10000.gsc: Adding to iommu group 2 Jun 30 10:57:33.657866 [ 16.267281] exynos-gsc 13e20000.gsc: Adding to iommu group 3 Jun 30 10:57:33.669770 [ 16.273271] exynos-gsc 13e30000.gsc: Adding to iommu group 4 Jun 30 10:57:33.669834 [ 16.352327] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 10:57:33.753788 [ 16.523931] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 10:57:33.921811 [ 16.554967] usb3503 usb-hub: switched to HUB mode Jun 30 10:57:33.945786 [ 16.558403] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 10:57:33.957738 [ 16.700818] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 10:57:34.101792 [ 16.803769] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Jun 30 10:57:34.197808 [ 16.833316] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 10:57:34.233675 [ 16.941549] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 10:57:34.341790 [ 16.972274] usb 2-3: new high-speed USB device number 2 using exynos-ehci Jun 30 10:57:34.365795 [ 17.049947] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 10:57:34.449791 [ 17.193764] hub 2-3:1.0: USB hub found Jun 30 10:57:34.593763 [ 17.203657] hub 2-3:1.0: 3 ports detected Jun 30 10:57:34.593823 [ 17.239554] I/O error, dev mmcblk1, sector 7743714 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 Jun 30 10:57:34.641773 [ 17.286217] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 10:57:34.689824 [ 17.293910] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 10:57:34.689895 [ 17.302648] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 10:57:34.701833 [ 17.313722] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 10:57:34.713825 [ 17.322159] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 10:57:34.725819 [ 17.330897] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 10:57:34.737749 [ 17.532291] usb 2-3.2: new high-speed USB device number 3 using exynos-ehci Jun 30 10:57:34.929814 [ 17.612603] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 10:57:35.013777 [ 17.685135] hub 2-3.2:1.0: USB hub found Jun 30 10:57:35.085767 [ 17.688076] hub 2-3.2:1.0: 4 ports detected Jun 30 10:57:35.085827 [ 17.757025] usbcore: registered new device driver onboard-usb-dev Jun 30 10:57:35.157756 [ 17.771579] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 10:57:35.169800 [ 17.883006] hub 2-3.2:1.0: USB hub found Jun 30 10:57:35.277802 [ 17.885942] hub 2-3.2:1.0: 4 ports detected Jun 30 10:57:35.277862 [ 17.889927] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 10:57:35.289794 [ 17.908047] hub 2-3.2:1.0: USB hub found Jun 30 10:57:35.301801 [ 17.910983] hub 2-3.2:1.0: 4 ports detected Jun 30 10:57:35.301859 [ 17.999043] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 10:57:35.397798 [ 18.106810] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 10:57:35.505805 [ 18.214581] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 10:57:35.613832 [ 18.222163] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 10:57:35.625806 [ 18.232292] usb 2-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 30 10:57:35.625870 done. Jun 30 10:57:35.625909 [ 18.386429] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 30 10:57:35.781821 [ 18.680020] EXT4-fs (dm-0): re-mounted f7502202-a08c-485a-b088-73e644f85daa r/w. Quota mode: disabled. Jun 30 10:57:36.081779 [ 19.096255] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 10:57:36.493825 [ 19.112863] Asix Electronics AX88772A usb-002:004:10: attached PHY driver (mii_bus:phy_addr=usb-002:004:10, irq=POLL) Jun 30 10:57:36.517741 [ 19.122868] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 7a:27:2f:d3:6e:83 Jun 30 10:57:36.529683 Checking file systems.../dev/sda1: recovering journal Jun 30 10:57:37.729710 /dev/sda1: clean, 2179/61056 files, 44464/243968 blocks Jun 30 10:57:37.789718 done. Jun 30 10:57:37.825677 Cleaning up temporary files... /tmp Jun 30 10:57:38.029693 . Jun 30 10:57:38.029745 [ 20.825634] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 30 10:57:38.221744 [ 20.877565] EXT4-fs (sda1): mounted filesystem c0e4880f-25d6-4ded-a490-3e8df078eab1 r/w with ordered data mode. Quota mode: disabled. Jun 30 10:57:38.281673 [ 20.977890] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k Jun 30 10:57:38.377741 Mounting local filesystems...done. Jun 30 10:57:38.629693 Activating swapfile swap, if any...done. Jun 30 10:57:38.641676 Cleaning up temporary files.... Jun 30 10:57:38.665699 Starting Setting kernel variables: sysctl. Jun 30 10:57:38.809703 [ 22.818884] xenbr0: port 1(eth0) entered blocking state Jun 30 10:57:40.213730 [ 22.822796] xenbr0: port 1(eth0) entered disabled state Jun 30 10:57:40.225741 [ 22.828060] asix 2-3.2.4:1.0 eth0: entered allmulticast mode Jun 30 10:57:40.225803 [ 22.833940] asix 2-3.2.4:1.0 eth0: entered promiscuous mode Jun 30 10:57:40.225851 [ 22.844840] asix 2-3.2.4:1.0 eth0: configuring for phy/internal link mode Jun 30 10:57:40.237724 Configuring network interfaces...RTNETLINK answers: Operation not supported Jun 30 10:57:42.073750 Jun 30 10:57:42.073807 Waiting for xenbr0 to get ready (MAXWAIT is 2 seconds). Jun 30 10:57:42.085692 [ 25.060717] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 30 10:57:42.457756 [ 25.066783] xenbr0: port 1(eth0) entered blocking state Jun 30 10:57:42.469730 [ 25.071979] xenbr0: port 1(eth0) entered forwarding state Jun 30 10:57:42.469793 done. Jun 30 10:57:42.673676 Cleaning up temporary files.... Jun 30 10:57:42.733692 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Jun 30 10:57:43.009742 Starting nftables: none Jun 30 10:57:43.009807 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Jun 30 10:57:43.069726 failed! Jun 30 10:57:43.069779 startpar: service(s) returned failure: nftables ... failed! Jun 30 10:57:43.069827 INIT: Entering runlevel: 2 Jun 30 10:57:43.093721 Using makefile-style concurrent boot in runlevel 2. Jun 30 10:57:43.105622 Starting Apache httpd web server: apache2AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.149.64.44. Set the 'ServerName' directive globally to suppress this message Jun 30 10:57:43.925780 . Jun 30 10:57:45.009754 Starting NTP server: ntpd2000-01-02T00:00:51 ntpd[1145]: INIT: ntpd ntpsec-1.2.2: Starting Jun 30 10:57:45.489785 2000-01-02T00:00:51 ntpd[1145]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 30 10:57:45.501679 . Jun 30 10:57:45.501730 Starting SMP IRQ Balancer: irqbalance. Jun 30 10:57:45.681701 Starting system message bus: dbus. Jun 30 10:57:46.005693 Starting OpenBSD Secure Shell server: sshd. Jun 30 10:57:46.509698 Starting /usr/local/sbin/xenstored... Jun 30 10:57:48.541749 Setting domain 0 name, domid and JSON config... Jun 30 10:57:48.541818 Done setting up Dom0 Jun 30 10:57:48.541860 Starting xenconsoled... Jun 30 10:57:48.541900 Starting QEMU as disk backend for dom0 Jun 30 10:57:48.553680 Jun 30 10:57:49.665862 Debian GNU/Linux 12 arndale-metrocentre hvc0 Jun 30 10:57:49.677664 Jun 30 10:57:49.677714 arndale-metrocentre login: [ 83.881239] sd 0:0:0:0: [sda] Synchronizing SCSI cache Jun 30 10:58:41.272603 [ 83.890690] wake enabled for irq 119 (gpx1-4) Jun 30 10:58:41.284645 [ 83.893739] wake enabled for irq 120 (gpx1-5) Jun 30 10:58:41.284645 [ 83.898119] wake enabled for irq 121 (gpx1-6) Jun 30 10:58:41.296665 [ 83.902588] wake enabled for irq 122 (gpx1-7) Jun 30 10:58:41.296665 [ 83.906971] wake enabled for irq 123 (gpx2-0) Jun 30 10:58:41.308629 [ 83.911398] wake enabled for irq 124 (gpx2-1) Jun 30 10:58:41.308629 [ 83.916199] reboot: Resô Jun 30 10:58:41.644626 Jun 30 10:58:41.644626 Jun 30 10:58:41.644816 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 10:58:41.644816 Jun 30 10:58:41.644939 CPU: Exynos5250@1000MHz Jun 30 10:58:41.656633 Jun 30 10:58:41.656633 Board: Arndale Jun 30 10:58:41.656633 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 10:58:41.656633 ready Jun 30 10:58:41.656633 DRAM: 2 GiB Jun 30 10:58:41.656633 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 10:58:41.680597 trace: enabled Jun 30 10:58:41.716601 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 10:58:42.076614 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 10:58:42.136645 In: serial Jun 30 10:58:42.136645 Out: serial Jun 30 10:58:42.136645 Err: serial Jun 30 10:58:42.136645 SCSI: ARNDALE SCSI INIT Jun 30 10:58:42.136645 Target spinup took 0 ms. Jun 30 10:58:42.148643 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 10:58:42.148643 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 10:58:42.160665 Net: Net Initialization Skipped Jun 30 10:58:42.160665 No ethernet found. Jun 30 10:58:42.160665 Hostname: arndale-metrocentre Jun 30 10:58:42.160665 Hit any key to stop autoboot: 2  1  0 Jun 30 10:58:44.084606 (Re)start USB... Jun 30 10:58:44.084606 USB0: USB EHCI 1.00 Jun 30 10:58:44.096624 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 10:58:49.685697 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 10:58:49.697651 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 10:58:50.141668 Waiting for Ethernet connection... done. Jun 30 10:58:51.737626 BOOTP broadcast 1 Jun 30 10:58:51.737658 BOOTP broadcast 2 Jun 30 10:58:54.141742 DHCP client bound to address 10.149.64.44 (2505 ms) Jun 30 10:58:54.141820 Using asx0 device Jun 30 10:58:54.141862 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 10:58:54.157682 Filename 'pxelinux.0'. Jun 30 10:58:54.157737 Load address: 0x43e00000 Jun 30 10:58:54.157779 Loading: *### Jun 30 10:58:54.169513 2.2 MiB/s Jun 30 10:58:54.169542 done Jun 30 10:58:54.169571 Bytes transferred = 42430 (a5be hex) Jun 30 10:58:54.185598 missing environment variable: pxeuuid Jun 30 10:58:54.185628 Retrieving file: pxelinux.cfg/0A95402C Jun 30 10:58:54.185653 Using asx0 device Jun 30 10:58:54.185675 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 10:58:54.197643 Filename 'pxelinux.cfg/0A95402C'. Jun 30 10:58:54.197674 Load address: 0x51000000 Jun 30 10:58:54.197697 Loading: *# Jun 30 10:58:54.197718 358.4 KiB/s Jun 30 10:58:54.197740 done Jun 30 10:58:54.197760 Bytes transferred = 734 (2de hex) Jun 30 10:58:54.209651 Config file found Jun 30 10:58:54.209681 Ignoring unknown command: serial Jun 30 10:58:54.209705 1: ^Overwrite Jun 30 10:58:54.209727 Retrieving file: /osstest/tmp//arndale-metrocentre--initrd.gz Jun 30 10:58:54.221664 Using asx0 device Jun 30 10:58:54.221693 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 10:58:54.221720 Filename '/osstest/tmp//arndale-metrocentre--initrd.gz'. Jun 30 10:58:54.233606 Load address: 0x43300000 Jun 30 10:58:54.233639 Loading: *################################################################# Jun 30 10:58:54.561738 ################################################################# Jun 30 10:58:54.878005 ################################################################# Jun 30 10:58:55.201611 ################################################################# Jun 30 10:58:55.525742 ################################################################# Jun 30 10:58:55.849683 ################################################################# Jun 30 10:58:56.173676 ################################################################# Jun 30 10:58:56.497690 ################################################################# Jun 30 10:58:56.821688 ################################################################# Jun 30 10:58:57.145673 ################################################################# Jun 30 10:58:57.469743 ################################################################# Jun 30 10:58:57.793689 ################################################################# Jun 30 10:58:58.117768 ################################################################# Jun 30 10:58:58.453685 ################################################################# Jun 30 10:58:58.777683 ################################################################# Jun 30 10:58:59.101681 ################################################################# Jun 30 10:58:59.425685 ################################################################# Jun 30 10:58:59.749696 ################################################################# Jun 30 10:59:00.073704 ################################################################# Jun 30 10:59:00.397738 ################################################################# Jun 30 10:59:00.721751 ################################################################# Jun 30 10:59:01.033751 ################################################################# Jun 30 10:59:01.357710 ################################################################# Jun 30 10:59:01.681673 ################################################################# Jun 30 10:59:02.005686 ################################################################# Jun 30 10:59:02.317631 ################################################################# Jun 30 10:59:02.641683 ################################################################# Jun 30 10:59:02.965698 ###################################### Jun 30 10:59:03.145755 2.7 MiB/s Jun 30 10:59:03.145810 done Jun 30 10:59:03.145849 Bytes transferred = 26310349 (19176cd hex) Jun 30 10:59:03.145894 Retrieving file: /osstest/debian-installer/armhf/2024-03-26-bookworm/linux Jun 30 10:59:03.157736 Using asx0 device Jun 30 10:59:03.169786 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 10:59:03.169848 Filename '/osstest/debian-installer/armhf/2024-03-26-bookworm/linux'. Jun 30 10:59:03.181645 Load address: 0x42000000 Jun 30 10:59:03.181701 Loading: *################################################################# Jun 30 10:59:03.505695 ################################################################# Jun 30 10:59:03.829566 ################################################################# Jun 30 10:59:04.093606 ################################################################# Jun 30 10:59:04.348536 ################################################################# Jun 30 10:59:04.600661 ############################################# Jun 30 10:59:04.768587 3.1 MiB/s Jun 30 10:59:04.768587 done Jun 30 10:59:04.768587 Bytes transferred = 5423616 (52c200 hex) Jun 30 10:59:04.768587 append: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-metrocentre url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=43308 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-metrocentre--initrd.gz --- console=ttySAC2,115200n8 Jun 30 10:59:04.816613 Retrieving file: /osstest/debian-installer/armhf/2024-03-26-bookworm/dtbs/exynos5250-arndale.dtb Jun 30 10:59:04.816613 Using asx0 device Jun 30 10:59:04.828599 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 10:59:04.828599 Filename '/osstest/debian-installer/armhf/2024-03-26-bookworm/dtbs/exynos5250-arndale.dtb'. Jun 30 10:59:04.840562 Load address: 0x43000000 Jun 30 10:59:04.840562 Loading: *#### Jun 30 10:59:04.849642 2.3 MiB/s Jun 30 10:59:04.849671 done Jun 30 10:59:04.849692 Bytes transferred = 46686 (b65e hex) Jun 30 10:59:04.861705 Kernel image @ 0x42000000 [ 0x000000 - 0x52c200 ] Jun 30 10:59:04.861738 ## Flattened Device Tree blob at 43000000 Jun 30 10:59:04.861762 Booting using the fdt blob at 0x43000000 Jun 30 10:59:04.873684 Loading Ramdisk to 4e6e8000, end 4ffff6cd ... OK Jun 30 10:59:05.293666 Loading Device Tree to 4e6d9000, end 4e6e765d ... OK Jun 30 10:59:05.305659 Jun 30 10:59:05.305687 Starting kernel ...(fake run for tracing) Jun 30 10:59:05.305712 Jun 30 10:59:05.305732 Jun 30 10:59:05.317644 Starting kernel ... Jun 30 10:59:05.317675 Jun 30 10:59:05.317696 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 10:59:11.417769 [ 0.000000] Linux version 6.1.0-18-armmp (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.76-1 (2024-02-01) Jun 30 10:59:11.441757 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 30 10:59:11.441822 [ 0.000000] CPU: div instructions available: patching division code Jun 30 10:59:11.453772 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 10:59:11.453835 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 10:59:11.465785 [ 0.000000] Memory policy: Data cache writealloc Jun 30 10:59:11.465843 [ 0.000000] efi: UEFI not found. Jun 30 10:59:11.477752 [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 Jun 30 10:59:11.477811 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 10:59:11.477855 [ 0.000000] Zone ranges: Jun 30 10:59:11.489751 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Jun 30 10:59:11.489813 [ 0.000000] Normal empty Jun 30 10:59:11.489891 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Jun 30 10:59:11.501783 [ 0.000000] Movable zone start for each node Jun 30 10:59:11.501841 [ 0.000000] Early memory node ranges Jun 30 10:59:11.501886 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 10:59:11.513758 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 10:59:11.525755 [ 0.000000] percpu: Embedded 18 pages/cpu s41620 r8192 d23916 u73728 Jun 30 10:59:11.525819 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Jun 30 10:59:11.537760 [ 0.000000] Kernel command line: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-metrocentre url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=43308 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-metrocentre--initrd.gz --- console=ttySAC2,115200n8 Jun 30 10:59:11.573776 [ 0.000000] Unknown kernel command line parameters "preseed --- vga=normal auto=true hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=43308 domain=test-lab.xenproject.org", will be passed to user space. Jun 30 10:59:11.621907 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Jun 30 10:59:11.621975 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 10:59:11.633815 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Jun 30 10:59:11.633878 [ 0.000000] Memory: 2015996K/2097152K available (11264K kernel code, 1696K rwdata, 3716K rodata, 2048K init, 378K bss, 64772K reserved, 16384K cma-reserved, 1294332K highmem) Jun 30 10:59:11.657777 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 10:59:11.657840 [ 0.000000] ftrace: allocating 39582 entries in 117 pages Jun 30 10:59:11.669751 [ 0.000000] ftrace: allocated 116 pages with 4 groups Jun 30 10:59:11.669811 [ 0.000000] trace event string verifier disabled Jun 30 10:59:11.681767 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 10:59:11.681827 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Jun 30 10:59:11.681879 [ 0.000000] Rude variant of Tasks RCU enabled. Jun 30 10:59:11.693762 [ 0.000000] Tracing variant of Tasks RCU enabled. Jun 30 10:59:11.693821 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Jun 30 10:59:11.705775 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 10:59:11.705838 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 10:59:11.717770 [ 0.000000] GIC: Using split EOI/Deactivate mode Jun 30 10:59:11.717830 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 10:59:11.729755 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 10:59:11.729816 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Jun 30 10:59:11.741653 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Jun 30 10:59:11.753701 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Jun 30 10:59:11.753764 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Jun 30 10:59:11.765647 [ 0.002635] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Jun 30 10:59:11.765682 [ 0.002649] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 10:59:11.777810 [ 0.002664] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 10:59:11.789775 [ 0.002676] Ignoring duplicate/late registration of read_current_timer delay Jun 30 10:59:11.801750 [ 0.003046] Console: colour dummy device 80x30 Jun 30 10:59:11.801810 [ 0.003089] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Jun 30 10:59:11.813772 [ 0.003102] CPU: Testing write buffer coherency: ok Jun 30 10:59:11.813832 [ 0.003145] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 10:59:11.825776 [ 0.003152] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 10:59:11.825838 [ 0.003159] pid_max: default: 32768 minimum: 301 Jun 30 10:59:11.837741 [ 0.003515] LSM: Security Framework initializing Jun 30 10:59:11.837800 [ 0.003586] landlock: Up and running. Jun 30 10:59:11.849763 [ 0.003590] Yama: disabled by default; enable with sysctl kernel.yama.* Jun 30 10:59:11.849827 [ 0.003779] AppArmor: AppArmor initialized Jun 30 10:59:11.849873 [ 0.003791] TOMOYO Linux initialized Jun 30 10:59:11.861760 [ 0.003832] LSM support for eBPF active Jun 30 10:59:11.861818 [ 0.004075] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 10:59:11.873754 [ 0.004089] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 10:59:11.873821 [ 0.005525] /cpus/cpu@0 missing clock-frequency property Jun 30 10:59:11.885763 [ 0.005551] /cpus/cpu@1 missing clock-frequency property Jun 30 10:59:11.885824 [ 0.005564] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 10:59:11.897755 [ 0.006526] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 10:59:11.897823 [ 0.006532] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 10:59:11.909777 [ 0.006636] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 10:59:11.909844 [ 0.006642] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 10:59:11.921780 [ 0.006790] Setting up static identity map for 0x40300000 - 0x403000ac Jun 30 10:59:11.921843 [ 0.007954] rcu: Hierarchical SRCU implementation. Jun 30 10:59:11.933754 [ 0.007960] rcu: Max phase no-delay instances is 1000. Jun 30 10:59:11.933815 [ 0.010102] EFI services will not be available. Jun 30 10:59:11.945768 [ 0.010448] smp: Bringing up secondary CPUs ... Jun 30 10:59:11.945828 [ 0.011195] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 10:59:11.945876 [ 0.011207] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 10:59:11.957793 [ 0.011335] smp: Brought up 1 node, 2 CPUs Jun 30 10:59:11.969764 [ 0.011343] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 10:59:11.969827 [ 0.011351] CPU: All CPU(s) started in HYP mode. Jun 30 10:59:11.969874 [ 0.011355] CPU: Virtualization extensions available. Jun 30 10:59:11.981754 [ 0.012022] devtmpfs: initialized Jun 30 10:59:11.981811 [ 0.023045] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 10:59:11.993780 [ 0.023298] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Jun 30 10:59:12.005775 [ 0.023323] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 10:59:12.005841 [ 0.023796] pinctrl core: initialized pinctrl subsystem Jun 30 10:59:12.017762 [ 0.024524] DMI not present or invalid. Jun 30 10:59:12.017821 [ 0.025203] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 10:59:12.017872 [ 0.030576] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 10:59:12.029781 [ 0.032129] audit: initializing netlink subsys (disabled) Jun 30 10:59:12.029842 [ 0.032334] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 Jun 30 10:59:12.041779 [ 0.033501] thermal_sys: Registered thermal governor 'fair_share' Jun 30 10:59:12.053774 [ 0.033508] thermal_sys: Registered thermal governor 'bang_bang' Jun 30 10:59:12.053838 [ 0.033513] thermal_sys: Registered thermal governor 'step_wise' Jun 30 10:59:12.065776 [ 0.033517] thermal_sys: Registered thermal governor 'user_space' Jun 30 10:59:12.065840 [ 0.033522] thermal_sys: Registered thermal governor 'power_allocator' Jun 30 10:59:12.077754 [ 0.033888] No ATAGs? Jun 30 10:59:12.077810 [ 0.033957] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jun 30 10:59:12.089749 [ 0.033966] hw-breakpoint: maximum watchpoint size is 8 bytes. Jun 30 10:59:12.089813 [ 0.035056] Serial: AMBA PL011 UART driver Jun 30 10:59:12.089859 [ 0.091459] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Jun 30 10:59:12.101770 [ 0.102471] iommu: Default domain type: Translated Jun 30 10:59:12.101829 [ 0.102479] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 10:59:12.113766 [ 0.103456] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Jun 30 10:59:12.113829 [ 0.104021] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 10:59:12.125765 [ 0.104032] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 10:59:12.125827 [ 0.104680] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 10:59:12.137815 [ 0.104710] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 10:59:12.149724 [ 0.104892] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 10:59:12.149784 [ 0.105246] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 10:59:12.161765 [ 0.105256] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 10:59:12.161826 [ 0.105648] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 10:59:12.173760 [ 0.105938] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 10:59:12.173821 [ 0.105947] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 10:59:12.185762 [ 0.106225] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 10:59:12.185823 [ 0.106324] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 10:59:12.185870 [ 0.106333] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 10:59:12.197762 [ 0.106530] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 10:59:12.197822 [ 0.106729] pps_core: LinuxPPS API ver. 1 registered Jun 30 10:59:12.209661 [ 0.106734] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 10:59:12.209700 [ 0.106750] PTP clock support registered Jun 30 10:59:12.221768 [ 0.108243] NetLabel: Initializing Jun 30 10:59:12.221825 [ 0.108249] NetLabel: domain hash size = 128 Jun 30 10:59:12.221871 [ 0.108254] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Jun 30 10:59:12.233762 [ 0.108324] NetLabel: unlabeled traffic allowed by default Jun 30 10:59:12.233823 [ 0.108486] vgaarb: loaded Jun 30 10:59:12.245765 [ 0.109154] clocksource: Switched to clocksource mct-frc Jun 30 10:59:12.245826 [ 0.177936] VFS: Disk quotas dquot_6.6.0 Jun 30 10:59:12.245872 [ 0.178036] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jun 30 10:59:12.257772 [ 0.178778] AppArmor: AppArmor Filesystem Enabled Jun 30 10:59:12.257832 [ 0.187870] NET: Registered PF_INET protocol family Jun 30 10:59:12.269766 [ 0.188080] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Jun 30 10:59:12.269834 [ 0.189715] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 10:59:12.281775 [ 0.189806] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 10:59:12.293757 [ 0.189829] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Jun 30 10:59:12.293825 [ 0.189925] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Jun 30 10:59:12.305770 [ 0.190154] TCP: Hash tables configured (established 8192 bind 8192) Jun 30 10:59:12.305851 [ 0.190379] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Jun 30 10:59:12.317770 [ 0.190465] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 10:59:12.329756 [ 0.190504] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 10:59:12.329820 [ 0.190703] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 10:59:12.341761 [ 0.190737] NET: Registered PF_XDP protocol family Jun 30 10:59:12.341822 [ 0.190747] PCI: CLS 0 bytes, default 64 Jun 30 10:59:12.341868 [ 0.191266] Trying to unpack rootfs image as initramfs... Jun 30 10:59:12.353762 [ 0.191682] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Jun 30 10:59:12.353830 [ 0.191890] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Jun 30 10:59:12.365766 [ 0.193511] Initialise system trusted keyrings Jun 30 10:59:12.377784 [ 0.193605] Key type blacklist registered Jun 30 10:59:12.377843 [ 0.193833] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Jun 30 10:59:12.377894 [ 0.201312] zbud: loaded Jun 30 10:59:12.389755 [ 0.202729] integrity: Platform Keyring initialized Jun 30 10:59:12.389815 [ 0.202768] integrity: Machine keyring initialized Jun 30 10:59:12.389862 [ 0.202776] Key type asymmetric registered Jun 30 10:59:12.401768 [ 0.202783] Asymmetric key parser 'x509' registered Jun 30 10:59:12.401828 [ 1.562048] Freeing initrd memory: 25696K Jun 30 10:59:12.401874 [ 1.573892] alg: self-tests for CTR-KDF (hmac(sha256)) passed Jun 30 10:59:12.413764 [ 1.574181] bounce: pool size: 64 pages Jun 30 10:59:12.413821 [ 1.574347] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Jun 30 10:59:12.425776 [ 1.574510] io scheduler mq-deadline registered Jun 30 10:59:12.425834 [ 1.579662] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Jun 30 10:59:12.437767 [ 1.600589] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 10:59:12.449760 [ 1.600600] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 10:59:12.449832 [ 1.602936] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 10:59:12.461778 [ 1.602947] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 10:59:12.473760 [ 1.603736] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 10:59:12.473827 [ 1.603745] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 10:59:12.485779 [ 1.604570] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 10:59:12.497766 [ 1.604580] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 10:59:12.509757 [ 1.606989] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 10:59:12.509855 [ 1.609809] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 10:59:12.521765 [ 1.612519] Serial: AMBA driver Jun 30 10:59:12.521822 [ 1.612767] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 10:59:12.533778 [ 1.613303] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 10:59:12.545754 [ 1.613779] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 10:59:12.545826 [ 2.744673] printk: console [ttySAC2] enabled Jun 30 10:59:12.557764 [ 2.749504] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Jun 30 10:59:12.557836 [ 2.760142] STM32 USART driver initialized Jun 30 10:59:12.569656 [ 2.774324] mousedev: PS/2 mouse device common for all mice Jun 30 10:59:12.581725 [ 2.805503] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 10:59:12.617754 [ 2.814108] s5m-rtc s5m-rtc: setting system clock to 2000-01-02T00:02:19 UTC (946771339) Jun 30 10:59:12.629766 [ 2.823930] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Jun 30 10:59:12.629831 [ 2.831413] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 10:59:12.641738 [ 2.839412] NET: Registered PF_INET6 protocol family Jun 30 10:59:12.653700 [ 2.853291] Segment Routing with IPv6 Jun 30 10:59:12.665654 [ 2.855534] In-situ OAM (IOAM) with IPv6 Jun 30 10:59:12.665685 [ 2.859490] mip6: Mobile IPv6 Jun 30 10:59:12.665709 [ 2.862399] NET: Registered PF_PACKET protocol family Jun 30 10:59:12.677766 [ 2.867555] mpls_gso: MPLS GSO support Jun 30 10:59:12.677841 [ 2.871736] ThumbEE CPU extension supported. Jun 30 10:59:12.677867 [ 2.875416] Registering SWP/SWPB emulation handler Jun 30 10:59:12.689684 [ 2.880636] registered taskstats version 1 Jun 30 10:59:12.689717 [ 2.884293] Loading compiled-in X.509 certificates Jun 30 10:59:12.689746 [ 3.340815] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Jun 30 10:59:13.157787 [ 3.348157] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Jun 30 10:59:13.157867 [ 3.359192] zswap: loaded using pool lzo/zbud Jun 30 10:59:13.169754 [ 3.363189] Key type .fscrypt registered Jun 30 10:59:13.169813 [ 3.366492] Key type fscrypt-provisioning registered Jun 30 10:59:13.181721 [ 3.380439] Key type encrypted registered Jun 30 10:59:13.193753 [ 3.383035] AppArmor: AppArmor sha1 policy hashing enabled Jun 30 10:59:13.193817 [ 3.388490] ima: No TPM chip found, activating TPM-bypass! Jun 30 10:59:13.193867 [ 3.393955] ima: Allocated hash algorithm: sha256 Jun 30 10:59:13.205768 [ 3.398676] ima: No architecture policies found Jun 30 10:59:13.205835 [ 3.403187] evm: Initialising EVM extended attributes: Jun 30 10:59:13.217752 [ 3.408260] evm: security.selinux Jun 30 10:59:13.217811 [ 3.411549] evm: security.SMACK64 (disabled) Jun 30 10:59:13.217858 [ 3.415799] evm: security.SMACK64EXEC (disabled) Jun 30 10:59:13.229767 [ 3.420400] evm: security.SMACK64TRANSMUTE (disabled) Jun 30 10:59:13.229830 [ 3.425434] evm: security.SMACK64MMAP (disabled) Jun 30 10:59:13.229876 [ 3.430033] evm: security.apparmor Jun 30 10:59:13.241767 [ 3.433419] evm: security.ima Jun 30 10:59:13.241824 [ 3.436356] evm: security.capability Jun 30 10:59:13.241870 [ 3.439934] evm: HMAC attrs: 0x1 Jun 30 10:59:13.253588 [ 4.023642] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 10:59:13.829745 [ 4.050002] Freeing unused kernel image (initmem) memory: 2048K Jun 30 10:59:13.853738 [ 4.054870] Checked W+X mappings: passed, no W+X pages found Jun 30 10:59:13.865741 [ 4.060129] Run /init as init process Jun 30 10:59:13.865800 [ 4.633459] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 10:59:14.441799 [ 4.692093] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 10:59:14.501725 [ 4.716228] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 10:59:14.525782 [ 4.756131] usbcore: registered new interface driver usbfs Jun 30 10:59:14.561780 [ 4.763603] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 10:59:14.581242 [ 4.774395] usbcore: registered new interface driver hub Jun 30 10:59:14.585765 [ 4.778347] usbcore: registered new device driver usb Jun 30 10:59:14.585826 [ 4.814555] phy phy-12130000.phy.3: phy_power_on was called before phy_init Jun 30 10:59:14.621774 [ 4.823436] exynos-ohci 12120000.usb: USB Host Controller Jun 30 10:59:14.633801 [ 4.833987] phy phy-12130000.phy.3: phy_power_on was called before phy_init Jun 30 10:59:14.645779 [ 4.839669] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 10:59:14.645841 [ 4.849569] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Jun 30 10:59:14.657785 [ 4.866983] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Jun 30 10:59:14.681677 [ 4.874287] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 10:59:14.681711 [ 4.881062] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Jun 30 10:59:14.693582 [ 4.900138] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Jun 30 10:59:14.705753 [ 4.921381] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 10:59:14.729806 [ 4.925206] usb3503 usb-hub: switched to HUB mode Jun 30 10:59:14.729851 [ 4.927463] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 10:59:14.741838 [ 4.930679] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 10:59:14.753783 [ 4.938869] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 10:59:14.753851 [ 4.938880] usb usb2: Product: EHCI Host Controller Jun 30 10:59:14.765784 [ 4.938888] usb usb2: Manufacturer: Linux 6.1.0-18-armmp ehci_hcd Jun 30 10:59:14.765846 [ 4.962824] usb usb2: SerialNumber: 12110000.usb Jun 30 10:59:14.777733 [ 4.977492] hub 2-0:1.0: USB hub found Jun 30 10:59:14.789767 [ 4.980918] hub 2-0:1.0: 3 ports detected Jun 30 10:59:14.789825 [ 4.986385] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Jun 30 10:59:14.801862 [ 4.993238] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 10:59:14.801913 [ 5.000409] usb usb1: Product: USB Host Controller Jun 30 10:59:14.813784 [ 5.005181] usb usb1: Manufacturer: Linux 6.1.0-18-armmp ohci_hcd Jun 30 10:59:14.813846 [ 5.011249] usb usb1: SerialNumber: 12120000.usb Jun 30 10:59:14.825725 [ 5.022156] hub 1-0:1.0: USB hub found Jun 30 10:59:14.825783 [ 5.032367] hub 1-0:1.0: 3 ports detected Jun 30 10:59:14.837762 [ 5.249190] usb 2-3: new high-speed USB device number 2 using exynos-ehci Jun 30 10:59:15.053753 [ 5.301910] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 10:59:15.113784 [ 5.305968] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 10:59:15.113852 [ 5.314133] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 Jun 30 10:59:15.125765 [ 5.323033] xhci-hcd xhci-hcd.2.auto: irq 108, io mem 0x12000000 Jun 30 10:59:15.137898 [ 5.329214] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 10:59:15.137961 [ 5.334425] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 10:59:15.149872 [ 5.342081] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 10:59:15.149934 [ 5.348732] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 10:59:15.161867 [ 5.356822] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 10:59:15.173840 [ 5.364017] usb usb3: Product: xHCI Host Controller Jun 30 10:59:15.173901 [ 5.368877] usb usb3: Manufacturer: Linux 6.1.0-18-armmp xhci-hcd Jun 30 10:59:15.185850 [ 5.374950] usb usb3: SerialNumber: xhci-hcd.2.auto Jun 30 10:59:15.185923 [ 5.381010] hub 3-0:1.0: USB hub found Jun 30 10:59:15.185970 [ 5.383610] hub 3-0:1.0: 1 port detected Jun 30 10:59:15.197843 [ 5.388471] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 10:59:15.197913 [ 5.395659] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Jun 30 10:59:15.209808 [ 5.403777] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 10:59:15.221724 [ 5.410999] usb usb4: Product: xHCI Host Controller Jun 30 10:59:15.221786 [ 5.415853] usb usb4: Manufacturer: Linux 6.1.0-18-armmp xhci-hcd Jun 30 10:59:15.221836 [ 5.421931] usb usb4: SerialNumber: xhci-hcd.2.auto Jun 30 10:59:15.233779 [ 5.421960] usb 2-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Jun 30 10:59:15.245768 [ 5.434940] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jun 30 10:59:15.245835 [ 5.436065] hub 4-0:1.0: USB hub found Jun 30 10:59:15.245904 [ 5.446197] hub 2-3:1.0: USB hub found Jun 30 10:59:15.257759 [ 5.449701] hub 2-3:1.0: 3 ports detected Jun 30 10:59:15.257817 [ 5.454574] hub 4-0:1.0: 1 port detected Jun 30 10:59:15.257862 Starting system log daemon: syslogd, klogd. Jun 30 10:59:15.389712 /var/run/utmp: No such file or directory Jun 30 10:59:17.237692 [?1h=(B   Jun 30 10:59:17.285707  Jun 30 10:59:17.297696 [  (-*) ][ Jan 02  0:02 ] Jun 30 10:59:17.309718 [  (0*start) ][ Jan 02  0:02 ] Jun 30 10:59:17.321712 [  (0*start) ][ Jan 02  0:02 ] Jun 30 10:59:17.333685 [  (0*start) ][ Jan 02  0:02 ] Jun 30 10:59:17.345705 [  (0*start) ][ Jan 02  0:02 ]                        [  (0*start) ][ Jan 02  0:02 ][  (0*start) ][ Jan 02  0:02 ] Jun 30 10:59:17.405648 [ 0- start  (2*shell) ][ Jan 02  0:02 ] Jun 30 10:59:17.417653 [ 0- start  (2*shell) ][ Jan 02  0:02 ] Jun 30 10:59:17.429631 [ 0- start  (2*shell) ][ Jan 02  0:02 ] Jun 30 10:59:17.441650 [ 0- start  (2*shell) ][ Jan 02  0:02 ]                        [ 0- start  (2*shell) ][ Jan 02  0:02 ][ 0- start  (2*shell) ][ Jan 02  0:02 ] Jun 30 10:59:17.501642 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:02 ] Jun 30 10:59:17.513651 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:02 ] Jun 30 10:59:17.525707 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:02 ] Jun 30 10:59:17.537714 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:02 ]                        [ 0 start 2- shell  (3*shell) ][ Jan 02  0:02 ][ 0 start 2- shell  (3*shell) ][ Jan 02  0:02 ] Jun 30 10:59:17.597754 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:02 ] Jun 30 10:59:17.609701 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:02 ] Jun 30 10:59:17.621709 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:02 ] Jun 30 10:59:17.633710 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:02 ]                        [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:02 ][ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:02 ] Jun 30 10:59:17.693705 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:02 ] Jun 30 10:59:17.705706 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:02 ] Jun 30 10:59:17.717711 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:02 ] Jun 30 10:59:17.741691 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:02 ]                        [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:02 ][ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:02 ] Jun 30 10:59:17.789717 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:02 ] Jun 30 10:59:17.801704 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:02 ] Jun 30 10:59:17.825628 [  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:02 ] Jun 30 10:59:18.281613 Detecting network hardware ... 2%... 95%... 100% Jun 30 10:59:20.021648 Detecting link on eth0; please wait... ... 0%... 10%... 20% Jun 30 10:59:24.929648 Waiting for link-local address... ... 8%... 16%... 25%... 33%... 41%... 100% Jun 30 10:59:26.213644 Attempting IPv6 autoconfiguration... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 75%... 83%... 91%... 100% Jun 30 10:59:32.285601 Configuring the network with DHCP ... 0%... 100% Jun 30 10:59:35.453611 Checking the Debian archive mirror ... 25%... 50%... 75%... 100% Jun 30 10:59:43.661748 Loading additional components ... 0%... 10%[  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:03 ]... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Jun 30 11:00:17.693733 Setting up the clock ... 0%... 3%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 11:00 ]... 100% Jun 30 11:00:20.501687 Loading additional components ... 50%... 100% Jun 30 11:00:22.184525 Detecting disks and all other hardware ... 2%... 95%... 100% Jun 30 11:00:26.133607 Loading additional components ... 5%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Jun 30 11:00:34.997666 Loading additional components ... 25%... 50%... 75%... 100% Jun 30 11:00:37.397622 Starting up the partitioner ... 4%... 13%... 21%... 30%... 43%... 52%... 60%... 73%... 82%... 91%... 100% Jun 30 11:00:53.185657 Guided partitioning ... 16%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 11:01 ]... 33%... 50%... 66%... 83%... 100% Jun 30 11:01:01.697705 Starting up the partitioner ... 4%... 12%... 20%... 32%... 40%... 52%... 60%... 72%... 80%... 92%... 100% Jun 30 11:01:15.349617 Partitions formatting ... 33% Jun 30 11:01:23.840511 Partitions formatting Jun 30 11:01:33.152735 Partitions formatting Installing the base system ... 0%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 11:02 ]... 17%... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 11:03 ]... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 11:04 ]... 48%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 11:05 ]... 50%...  Jun 30 11:05:23.373800  60%... 70%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 11:06 ]... 79%... 83%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 11:07 ][  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 11:08 ]... 91%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 11:09 ]... 100% Jun 30 11:09:49.032630 Configuring apt ... 7%... 14%... 14%... 21%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 11:10 ]... 35%... 42%... 50%... 60%... 70%. Jun 30 11:10:26.488541 ... 82%... 92%... 100% Jun 30 11:10:29.184513 Select and install software ... 1%... 10%... 13%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 11:11 ]... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 11:12 ]... 40%... 50%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 11:13 ]... Jun 30 11:13:16.917733 . 60%... 70%... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 11:14 ]... 88%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 11:15 ]... 90%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 11:16 ]... 94%... 100% Jun 30 11:16:29.860852 Finishing the installation ... 4%... 12%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 11:17 ][  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 11:18 ]... 16%... 20%... 32%... 40%... 44%... Jun 30 11:18:16.549751  52%... 60%... 72%... 80%... 92% The system is g Sent SIGKILL to all processes Jun 30 11:18:27.625759 Requesting system reboot Jun 30 11:18:27.625840 [ 1158.850844] reboot: Re˙ Jun 30 11:18:28.981736 Jun 30 11:18:28.981794 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 11:18:28.993755 Jun 30 11:18:28.993806 CPU: Exynos5250@1000MHz Jun 30 11:18:28.993851 Jun 30 11:18:28.993888 Board: Arndale Jun 30 11:18:28.993929 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 11:18:28.993976 ready Jun 30 11:18:28.994015 DRAM: 2 GiB Jun 30 11:18:28.994054 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 11:18:29.017716 trace: enabled Jun 30 11:18:29.053690 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 11:18:29.413707 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 11:18:29.473711 In: serial Jun 30 11:18:29.473765 Out: serial Jun 30 11:18:29.473806 Err: serial Jun 30 11:18:29.473846 SCSI: ARNDALE SCSI INIT Jun 30 11:18:29.473888 Target spinup took 0 ms. Jun 30 11:18:29.485736 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 11:18:29.485797 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 11:18:29.497757 Net: Net Initialization Skipped Jun 30 11:18:29.497815 No ethernet found. Jun 30 11:18:29.497858 Hostname: arndale-metrocentre Jun 30 11:18:29.497901 Hit any key to stop autoboot: 2  1  0 Jun 30 11:18:31.425581 (Re)start USB... Jun 30 11:18:31.425581 USB0: USB EHCI 1.00 Jun 30 11:18:31.425581 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 11:18:37.029650 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 11:18:37.029650 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 11:18:37.473616 Waiting for Ethernet connection... done. Jun 30 11:18:39.081676 BOOTP broadcast 1 Jun 30 11:18:39.081745 EHCI timed out on TD - token=0x8008d80 Jun 30 11:18:43.873770 BOOTP broadcast 2 Jun 30 11:18:43.885735 DHCP client bound to address 10.149.64.44 (5006 ms) Jun 30 11:18:43.885796 Using asx0 device Jun 30 11:18:43.885839 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 11:18:43.897719 Filename 'pxelinux.0'. Jun 30 11:18:43.897775 Load address: 0x43e00000 Jun 30 11:18:43.897818 Loading: *### Jun 30 11:18:43.909742 2.4 MiB/s Jun 30 11:18:43.909796 done Jun 30 11:18:43.909836 Bytes transferred = 42430 (a5be hex) Jun 30 11:18:43.921749 missing environment variable: pxeuuid Jun 30 11:18:43.921807 Retrieving file: pxelinux.cfg/0A95402C Jun 30 11:18:43.921854 Using asx0 device Jun 30 11:18:43.921895 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 11:18:43.933755 Filename 'pxelinux.cfg/0A95402C'. Jun 30 11:18:43.933813 Load address: 0x51000000 Jun 30 11:18:43.933857 Loading: *# Jun 30 11:18:43.933897 63.5 KiB/s Jun 30 11:18:43.945744 done Jun 30 11:18:43.945796 Bytes transferred = 65 (41 hex) Jun 30 11:18:43.945841 Config file found Jun 30 11:18:43.945883 Ignoring unknown command: serial Jun 30 11:18:43.945926 1: local Jun 30 11:18:43.945965 scanning bus for devices... Jun 30 11:18:43.957669 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 11:18:43.981748 Type: Hard Disk Jun 30 11:18:43.981805 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 11:18:43.981855 Found 1 device(s). Jun 30 11:18:43.981896 Jun 30 11:18:43.981933 SCSI device 0: Jun 30 11:18:43.993788 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 11:18:43.993852 Type: Hard Disk Jun 30 11:18:43.993895 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 11:18:44.005716 ... is now current device Jun 30 11:18:44.005773 Scanning scsi 0... Jun 30 11:18:44.005814 Found U-Boot script /boot.scr Jun 30 11:18:44.125689 641 bytes read in 37 ms (16.6 KiB/s) Jun 30 11:18:44.161674 ## Executing script at 50000000 Jun 30 11:18:44.161730 Loading dtbs/exynos5250-arndale.dtb Jun 30 11:18:44.173690 46686 bytes read in 874 ms (51.8 KiB/s) Jun 30 11:18:45.037681 Loading vmlinuz-6.1.0-22-armmp-lpae Jun 30 11:18:45.037712 5505536 bytes read in 190 ms (27.6 MiB/s) Jun 30 11:18:45.241774 Loading initrd.img-6.1.0-22-armmp-lpae Jun 30 11:18:45.241844 25721235 bytes read in 1894 ms (13 MiB/s) Jun 30 11:18:47.089727 Booting Jun 30 11:18:47.089784 Kernel image @ 0x42000000 [ 0x000000 - 0x540200 ] Jun 30 11:18:47.101744 ## Flattened Device Tree blob at 43000000 Jun 30 11:18:47.101802 Booting using the fdt blob at 0x43000000 Jun 30 11:18:47.101847 Loading Ramdisk to 4e778000, end 4ffff993 ... OK Jun 30 11:18:47.521701 Loading Device Tree to 4e769000, end 4e77765d ... OK Jun 30 11:18:47.521762 Jun 30 11:18:47.533712 Starting kernel ...(fake run for tracing) Jun 30 11:18:47.533772 Jun 30 11:18:47.533810 Jun 30 11:18:47.533846 Starting kernel ... Jun 30 11:18:47.533886 Jun 30 11:18:47.533922 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 11:18:53.689753 [ 0.000000] Linux version 6.1.0-22-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.94-1 (2024-06-21) Jun 30 11:18:53.701676 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=30c5387d Jun 30 11:18:53.713649 [ 0.000000] CPU: div instructions available: patching division code Jun 30 11:18:53.713683 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 11:18:53.725705 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 11:18:53.725743 [ 0.000000] Memory policy: Data cache writealloc Jun 30 11:18:53.737702 [ 0.000000] efi: UEFI not found. Jun 30 11:18:53.737733 [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000 Jun 30 11:18:53.749675 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 11:18:53.749705 [ 0.000000] Zone ranges: Jun 30 11:18:53.749729 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Jun 30 11:18:53.761664 [ 0.000000] Normal empty Jun 30 11:18:53.761695 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Jun 30 11:18:53.761722 [ 0.000000] Movable zone start for each node Jun 30 11:18:53.773721 [ 0.000000] Early memory node ranges Jun 30 11:18:53.773762 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 11:18:53.773789 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 11:18:53.785721 [ 0.000000] percpu: Embedded 18 pages/cpu s44756 r8192 d20780 u73728 Jun 30 11:18:53.797697 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Jun 30 11:18:53.797733 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=ttySAC2,115200n8 Jun 30 11:18:53.809711 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Jun 30 11:18:53.821707 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 11:18:53.821744 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Jun 30 11:18:53.833717 [ 0.000000] Memory: 2015520K/2097152K available (12288K kernel code, 1714K rwdata, 3748K rodata, 2048K init, 382K bss, 65248K reserved, 16384K cma-reserved, 1294332K highmem) Jun 30 11:18:53.845718 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 11:18:53.857732 [ 0.000000] ftrace: allocating 39982 entries in 118 pages Jun 30 11:18:53.857768 [ 0.000000] ftrace: allocated 118 pages with 5 groups Jun 30 11:18:53.869702 [ 0.000000] trace event string verifier disabled Jun 30 11:18:53.869735 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 11:18:53.869760 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Jun 30 11:18:53.881706 [ 0.000000] Rude variant of Tasks RCU enabled. Jun 30 11:18:53.881739 [ 0.000000] Tracing variant of Tasks RCU enabled. Jun 30 11:18:53.893685 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Jun 30 11:18:53.893723 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 11:18:53.905675 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 11:18:53.905705 [ 0.000000] GIC: Using split EOI/Deactivate mode Jun 30 11:18:53.917675 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 11:18:53.917706 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 11:18:53.929673 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Jun 30 11:18:53.929707 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Jun 30 11:18:53.941696 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Jun 30 11:18:53.953718 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Jun 30 11:18:53.953756 [ 0.002640] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Jun 30 11:18:53.965700 [ 0.002654] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 11:18:53.977716 [ 0.002669] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 11:18:53.977757 [ 0.002681] Ignoring duplicate/late registration of read_current_timer delay Jun 30 11:18:53.989673 [ 0.003046] Console: colour dummy device 80x30 Jun 30 11:18:53.989706 [ 0.003086] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Jun 30 11:18:54.001726 [ 0.003099] CPU: Testing write buffer coherency: ok Jun 30 11:18:54.013703 [ 0.003141] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 11:18:54.013744 [ 0.003149] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 11:18:54.025712 [ 0.003155] pid_max: default: 32768 minimum: 301 Jun 30 11:18:54.025749 [ 0.003513] LSM: Security Framework initializing Jun 30 11:18:54.037719 [ 0.003582] landlock: Up and running. Jun 30 11:18:54.037756 [ 0.003587] Yama: disabled by default; enable with sysctl kernel.yama.* Jun 30 11:18:54.049702 [ 0.003773] AppArmor: AppArmor initialized Jun 30 11:18:54.049735 [ 0.003785] TOMOYO Linux initialized Jun 30 11:18:54.049759 [ 0.003829] LSM support for eBPF active Jun 30 11:18:54.061692 [ 0.004073] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 11:18:54.061739 [ 0.004087] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 11:18:54.073787 [ 0.005490] /cpus/cpu@0 missing clock-frequency property Jun 30 11:18:54.073825 [ 0.005518] /cpus/cpu@1 missing clock-frequency property Jun 30 11:18:54.085676 [ 0.005531] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 11:18:54.085709 [ 0.006476] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 11:18:54.097658 [ 0.006482] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 11:18:54.097676 [ 0.006584] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 11:18:54.109670 [ 0.006589] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 11:18:54.109703 [ 0.006728] Setting up static identity map for 0x40400000 - 0x404000ac Jun 30 11:18:54.121700 [ 0.007894] rcu: Hierarchical SRCU implementation. Jun 30 11:18:54.121743 [ 0.007900] rcu: Max phase no-delay instances is 1000. Jun 30 11:18:54.133679 [ 0.010038] EFI services will not be available. Jun 30 11:18:54.133712 [ 0.010383] smp: Bringing up secondary CPUs ... Jun 30 11:18:54.133737 [ 0.011118] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 11:18:54.145703 [ 0.011130] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 11:18:54.157691 [ 0.011275] smp: Brought up 1 node, 2 CPUs Jun 30 11:18:54.157724 [ 0.011283] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 11:18:54.169711 [ 0.011291] CPU: All CPU(s) started in HYP mode. Jun 30 11:18:54.169751 [ 0.011294] CPU: Virtualization extensions available. Jun 30 11:18:54.169777 [ 0.012162] devtmpfs: initialized Jun 30 11:18:54.181716 [ 0.022982] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 11:18:54.181763 [ 0.023214] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Jun 30 11:18:54.193705 [ 0.023239] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 11:18:54.205711 [ 0.023773] pinctrl core: initialized pinctrl subsystem Jun 30 11:18:54.205755 [ 0.024525] DMI not present or invalid. Jun 30 11:18:54.205779 [ 0.025203] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 11:18:54.217694 [ 0.026744] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 11:18:54.217729 [ 0.028219] audit: initializing netlink subsys (disabled) Jun 30 11:18:54.229688 [ 0.028421] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 Jun 30 11:18:54.241747 [ 0.029602] thermal_sys: Registered thermal governor 'fair_share' Jun 30 11:18:54.241747 [ 0.029609] thermal_sys: Registered thermal governor 'bang_bang' Jun 30 11:18:54.253666 [ 0.029613] thermal_sys: Registered thermal governor 'step_wise' Jun 30 11:18:54.253701 [ 0.029618] thermal_sys: Registered thermal governor 'user_space' Jun 30 11:18:54.265676 [ 0.029623] thermal_sys: Registered thermal governor 'power_allocator' Jun 30 11:18:54.265711 [ 0.029819] No ATAGs? Jun 30 11:18:54.265733 [ 0.029885] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jun 30 11:18:54.277713 [ 0.029893] hw-breakpoint: maximum watchpoint size is 8 bytes. Jun 30 11:18:54.277747 [ 0.030973] Serial: AMBA PL011 UART driver Jun 30 11:18:54.289705 [ 0.080535] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 30 11:18:54.289742 [ 0.087418] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Jun 30 11:18:54.301692 [ 0.091818] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages Jun 30 11:18:54.313667 [ 0.091826] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page Jun 30 11:18:54.313702 [ 0.098653] iommu: Default domain type: Translated Jun 30 11:18:54.325683 [ 0.098661] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 11:18:54.325725 [ 0.099633] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Jun 30 11:18:54.337686 [ 0.100167] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 11:18:54.337725 [ 0.100178] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 11:18:54.349674 [ 0.100811] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 11:18:54.349713 [ 0.100841] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 11:18:54.361684 [ 0.101045] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 11:18:54.361718 [ 0.101401] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 11:18:54.373669 [ 0.101411] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 11:18:54.373703 [ 0.101791] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 11:18:54.385653 [ 0.102081] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 11:18:54.385686 [ 0.102090] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 11:18:54.397822 [ 0.102383] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 11:18:54.397885 [ 0.102501] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 11:18:54.409813 [ 0.102510] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 11:18:54.409847 [ 0.102689] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 11:18:54.409873 [ 0.102905] pps_core: LinuxPPS API ver. 1 registered Jun 30 11:18:54.421803 [ 0.102910] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 11:18:54.433697 [ 0.102926] PTP clock support registered Jun 30 11:18:54.433729 [ 0.104452] NetLabel: Initializing Jun 30 11:18:54.433754 [ 0.104457] NetLabel: domain hash size = 128 Jun 30 11:18:54.445671 [ 0.104462] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Jun 30 11:18:54.445705 [ 0.104517] NetLabel: unlabeled traffic allowed by default Jun 30 11:18:54.457679 [ 0.104688] vgaarb: loaded Jun 30 11:18:54.457695 [ 0.105145] clocksource: Switched to clocksource mct-frc Jun 30 11:18:54.457721 [ 0.105725] VFS: Disk quotas dquot_6.6.0 Jun 30 11:18:54.469666 [ 0.105810] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jun 30 11:18:54.469702 [ 0.106572] AppArmor: AppArmor Filesystem Enabled Jun 30 11:18:54.481680 [ 0.116617] NET: Registered PF_INET protocol family Jun 30 11:18:54.481697 [ 0.116813] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Jun 30 11:18:54.493769 [ 0.118299] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 11:18:54.493831 [ 0.118400] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 11:18:54.505729 [ 0.118426] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Jun 30 11:18:54.517676 [ 0.118527] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Jun 30 11:18:54.517707 [ 0.118758] TCP: Hash tables configured (established 8192 bind 8192) Jun 30 11:18:54.529674 [ 0.118997] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Jun 30 11:18:54.529703 [ 0.119089] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 11:18:54.541675 [ 0.119130] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 11:18:54.541702 [ 0.119343] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 11:18:54.553681 [ 0.119381] NET: Registered PF_XDP protocol family Jun 30 11:18:54.553702 [ 0.119393] PCI: CLS 0 bytes, default 64 Jun 30 11:18:54.565680 [ 0.119885] Trying to unpack rootfs image as initramfs... Jun 30 11:18:54.565695 [ 0.120243] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Jun 30 11:18:54.577676 [ 0.125739] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Jun 30 11:18:54.577707 [ 0.190110] Initialise system trusted keyrings Jun 30 11:18:54.589682 [ 0.190205] Key type blacklist registered Jun 30 11:18:54.589700 [ 0.191454] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Jun 30 11:18:54.601679 [ 0.199348] zbud: loaded Jun 30 11:18:54.601703 [ 0.201415] integrity: Platform Keyring initialized Jun 30 11:18:54.601729 [ 0.201447] integrity: Machine keyring initialized Jun 30 11:18:54.613674 [ 0.201456] Key type asymmetric registered Jun 30 11:18:54.613695 [ 0.201464] Asymmetric key parser 'x509' registered Jun 30 11:18:54.613721 [ 1.423488] Freeing initrd memory: 25120K Jun 30 11:18:54.625674 [ 1.445702] alg: self-tests for CTR-KDF (hmac(sha256)) passed Jun 30 11:18:54.625700 [ 1.445970] bounce: pool size: 64 pages Jun 30 11:18:54.625724 [ 1.446149] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Jun 30 11:18:54.637770 [ 1.446312] io scheduler mq-deadline registered Jun 30 11:18:54.637780 [ 1.451442] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Jun 30 11:18:54.649693 [ 1.472459] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 11:18:54.661784 [ 1.472470] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 11:18:54.673821 [ 1.474791] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 11:18:54.673873 [ 1.474801] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 11:18:54.685794 [ 1.475618] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 11:18:54.697746 [ 1.475627] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 11:18:54.697746 [ 1.476461] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 11:18:54.709674 [ 1.476470] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 11:18:54.721679 [ 1.478861] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 11:18:54.733674 [ 1.481688] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 11:18:54.733699 [ 1.484418] Serial: AMBA driver Jun 30 11:18:54.733723 [ 1.484642] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 11:18:54.745692 [ 1.485109] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 11:18:54.757678 [ 1.485624] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 11:18:54.769676 [ 2.566434] printk: console [ttySAC2] enabled Jun 30 11:18:54.769700 [ 2.571263] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Jun 30 11:18:54.781634 [ 2.581936] STM32 USART driver initialized Jun 30 11:18:54.781657 [ 2.596329] mousedev: PS/2 mouse device common for all mice Jun 30 11:18:54.793636 [ 2.627550] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 11:18:54.829652 [ 2.636179] s5m-rtc s5m-rtc: setting system clock to 2024-06-30T11:18:56 UTC (1719746336) Jun 30 11:18:54.841665 [ 2.646036] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Jun 30 11:18:54.853660 [ 2.653538] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 11:18:54.853679 [ 2.661541] NET: Registered PF_INET6 protocol family Jun 30 11:18:54.865625 [ 2.685593] Segment Routing with IPv6 Jun 30 11:18:54.889671 [ 2.687832] In-situ OAM (IOAM) with IPv6 Jun 30 11:18:54.889699 [ 2.691823] mip6: Mobile IPv6 Jun 30 11:18:54.889723 [ 2.694677] NET: Registered PF_PACKET protocol family Jun 30 11:18:54.901677 [ 2.699842] mpls_gso: MPLS GSO support Jun 30 11:18:54.901696 [ 2.703851] ThumbEE CPU extension supported. Jun 30 11:18:54.901721 [ 2.707713] Registering SWP/SWPB emulation handler Jun 30 11:18:54.913667 [ 2.712925] registered taskstats version 1 Jun 30 11:18:54.913690 [ 2.716588] Loading compiled-in X.509 certificates Jun 30 11:18:54.913716 [ 3.177336] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Jun 30 11:18:55.381680 [ 3.184664] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Jun 30 11:18:55.393676 [ 3.195727] zswap: loaded using pool lzo/zbud Jun 30 11:18:55.393703 [ 3.199679] Key type .fscrypt registered Jun 30 11:18:55.405633 [ 3.202983] Key type fscrypt-provisioning registered Jun 30 11:18:55.405662 [ 3.227224] Key type encrypted registered Jun 30 11:18:55.429674 [ 3.229818] AppArmor: AppArmor sha1 policy hashing enabled Jun 30 11:18:55.429702 [ 3.235285] ima: No TPM chip found, activating TPM-bypass! Jun 30 11:18:55.441671 [ 3.240745] ima: Allocated hash algorithm: sha256 Jun 30 11:18:55.441701 [ 3.245487] ima: No architecture policies found Jun 30 11:18:55.441726 [ 3.249996] evm: Initialising EVM extended attributes: Jun 30 11:18:55.453676 [ 3.255045] evm: security.selinux Jun 30 11:18:55.453714 [ 3.258335] evm: security.SMACK64 (disabled) Jun 30 11:18:55.465678 [ 3.262584] evm: security.SMACK64EXEC (disabled) Jun 30 11:18:55.465696 [ 3.267184] evm: security.SMACK64TRANSMUTE (disabled) Jun 30 11:18:55.465723 [ 3.272218] evm: security.SMACK64MMAP (disabled) Jun 30 11:18:55.477673 [ 3.276818] evm: security.apparmor Jun 30 11:18:55.477695 [ 3.280203] evm: security.ima Jun 30 11:18:55.477718 [ 3.283154] evm: security.capability Jun 30 11:18:55.489621 [ 3.286720] evm: HMAC attrs: 0x1 Jun 30 11:18:55.489646 [ 3.876304] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 11:18:56.077824 [ 3.882266] clk: Disabling unused clocks Jun 30 11:18:56.077886 [ 3.895214] Freeing unused kernel image (initmem) memory: 2048K Jun 30 11:18:56.101767 [ 3.900074] Checked W+X mappings: passed, no W+X pages found Jun 30 11:18:56.101769 [ 3.905332] Run /init as init process Jun 30 11:18:56.101769 Loading, please wait... Jun 30 11:18:56.137627 Starting systemd-udevd version 252.26-1~deb12u2 Jun 30 11:18:56.209631 [ 4.767183] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 11:18:56.965645 [ 4.786375] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 11:18:56.989639 [ 4.802511] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 11:18:57.001665 [ 4.805124] usbcore: registered new interface driver usbfs Jun 30 11:18:57.013634 [ 4.851095] Synopsys Designware Multimedia Card Interface Driver Jun 30 11:18:57.049635 [ 4.872739] usbcore: registered new interface driver hub Jun 30 11:18:57.073662 [ 4.877900] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 30 11:18:57.085609 [ 4.896338] SCSI subsystem initialized Jun 30 11:18:57.097629 [ 4.906872] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 30 11:18:57.109671 [ 4.907034] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 30 11:18:57.121673 [ 4.911900] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 30 11:18:57.121707 [ 4.923158] usbcore: registered new device driver usb Jun 30 11:18:57.121733 [ 4.938178] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 11:18:57.133633 [ 4.945250] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 30 11:18:57.145659 [ 4.946523] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo Jun 30 11:18:57.157630 [ 4.950279] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 30 11:18:57.157642 [ 4.988836] mmc_host mmc0: card is polling. Jun 30 11:18:57.193649 [ 4.996840] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo Jun 30 11:18:57.205678 [ 5.006211] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 11:18:57.217602 [ 5.047452] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 11:18:57.253663 [ 5.074881] phy phy-12130000.phy.2: phy_power_on was called before phy_init Jun 30 11:18:57.277770 [ 5.081347] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 11:18:57.277783 [ 5.087746] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Jun 30 11:18:57.289675 [ 5.094719] exynos-ehci 12110000.usb: irq 109, io mem 0x12110000 Jun 30 11:18:57.301637 [ 5.108127] phy phy-12130000.phy.2: phy_power_on was called before phy_init Jun 30 11:18:57.313649 [ 5.118463] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 11:18:57.325673 [ 5.124014] exynos-ohci 12120000.usb: USB Host Controller Jun 30 11:18:57.325698 [ 5.128730] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 11:18:57.337679 [ 5.136706] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 11:18:57.337714 [ 5.143868] usb usb1: Product: EHCI Host Controller Jun 30 11:18:57.349675 [ 5.148736] usb usb1: Manufacturer: Linux 6.1.0-22-armmp-lpae ehci_hcd Jun 30 11:18:57.349714 [ 5.155251] usb usb1: SerialNumber: 12110000.usb Jun 30 11:18:57.361651 [ 5.164203] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 30 11:18:57.361685 [ 5.173950] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 30 11:18:57.373648 [ 5.185731] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 30 11:18:57.385669 [ 5.200467] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 30 11:18:57.409649 [ 5.207398] mmc0: new DDR MMC card at address 0001 Jun 30 11:18:57.409682 [ 5.213412] hub 1-0:1.0: USB hub found Jun 30 11:18:57.409706 [ 5.223269] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 30 11:18:57.421714 [ 5.228963] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Jun 30 11:18:57.433673 [ 5.237411] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Jun 30 11:18:57.445669 [ 5.237743] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 30 11:18:57.445700 [ 5.252552] hub 1-0:1.0: 3 ports detected Jun 30 11:18:57.457672 [ 5.256947] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 11:18:57.457698 [ 5.267102] mmc1: new high speed SDHC card at address aaaa Jun 30 11:18:57.469676 [ 5.273854] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Jun 30 11:18:57.481672 [ 5.275260] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Jun 30 11:18:57.481704 [ 5.284712] exynos-ohci 12120000.usb: irq 109, io mem 0x12120000 Jun 30 11:18:57.493656 [ 5.296503] mmcblk0: p1 p2 p3 p4 Jun 30 11:18:57.493656 [ 5.306195] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Jun 30 11:18:57.505643 [ 5.312921] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Jun 30 11:18:57.517651 [ 5.319484] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (241:0) Jun 30 11:18:57.517683 [ 5.348339] scsi host0: ahci-dwc Jun 30 11:18:57.541611 [ 5.360133] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Jun 30 11:18:57.565674 [ 5.367007] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 11:18:57.565710 [ 5.369244] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 110 Jun 30 11:18:57.577674 [ 5.374159] usb usb2: Product: USB Host Controller Jun 30 11:18:57.589678 [ 5.386926] usb usb2: Manufacturer: Linux 6.1.0-22-armmp-lpae ohci_hcd Jun 30 11:18:57.589712 [ 5.393434] usb usb2: SerialNumber: 12120000.usb Jun 30 11:18:57.589737 [ 5.403954] hub 2-0:1.0: USB hub found Jun 30 11:18:57.601653 [ 5.406345] hub 2-0:1.0: 3 ports detected Jun 30 11:18:57.613670 [ 5.873219] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 30 11:18:58.069641 [ 5.878789] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 30 11:18:58.081674 [ 5.884651] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 30 11:18:58.093679 [ 5.892063] ata1.00: configured for UDMA/133 Jun 30 11:18:58.093697 [ 5.895868] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 30 11:18:58.105655 [ 5.907992] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 11:18:58.117678 [ 5.960609] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 11:18:58.165677 [ 5.964707] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 11:18:58.165709 [ 5.972826] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Jun 30 11:18:58.177674 [ 5.981703] xhci-hcd xhci-hcd.2.auto: irq 111, io mem 0x12000000 Jun 30 11:18:58.189671 [ 5.982231] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 11:18:58.189700 [ 5.988067] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 11:18:58.201681 [ 6.002846] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 11:18:58.213674 [ 6.010486] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 11:18:58.213698 [ 6.017166] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 11:18:58.225675 [ 6.025237] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 11:18:58.225705 [ 6.032430] usb usb3: Product: xHCI Host Controller Jun 30 11:18:58.237678 [ 6.037289] usb usb3: Manufacturer: Linux 6.1.0-22-armmp-lpae xhci-hcd Jun 30 11:18:58.237706 [ 6.043800] usb usb3: SerialNumber: xhci-hcd.2.auto Jun 30 11:18:58.249678 [ 6.049936] hub 3-0:1.0: USB hub found Jun 30 11:18:58.249702 [ 6.052406] hub 3-0:1.0: 1 port detected Jun 30 11:18:58.249726 [ 6.057359] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 11:18:58.261667 [ 6.064537] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Jun 30 11:18:58.273680 [ 6.072647] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 11:18:58.273712 [ 6.079848] usb usb4: Product: xHCI Host Controller Jun 30 11:18:58.285675 [ 6.084695] usb usb4: Manufacturer: Linux 6.1.0-22-armmp-lpae xhci-hcd Jun 30 11:18:58.285701 [ 6.091195] usb usb4: SerialNumber: xhci-hcd.2.auto Jun 30 11:18:58.297665 [ 6.098150] hub 4-0:1.0: USB hub found Jun 30 11:18:58.297683 [ 6.100490] hub 4-0:1.0: 1 port detected Jun 30 11:18:58.297707 [ 6.134282] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 11:18:58.345603 [ 6.161015] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 30 11:18:58.369679 [ 6.167065] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 30 11:18:58.369701 [ 6.172357] sd 0:0:0:0: [sda] Write Protect is off Jun 30 11:18:58.369726 [ 6.177124] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 30 11:18:58.381662 [ 6.190045] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 30 11:18:58.393634 [ 6.215696] sda: sda1 sda2 < sda5 > Jun 30 11:18:58.417655 [ 6.218554] sd 0:0:0:0: [sda] Attached SCSI disk Jun 30 11:18:58.417683 [ 6.242998] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 11:18:58.453607 [ 6.351071] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 11:18:58.561606 [ 6.459129] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 11:18:58.669606 [ 6.622210] I/O error, dev mmcblk1, sector 7743714 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 2 Jun 30 11:18:58.825657 [ 7.048770] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 11:18:59.257621 [ 7.122093] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 11:18:59.329622 [ 7.236211] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 11:18:59.437675 [ 7.245171] random: crng init done Jun 30 11:18:59.449602 [ 7.343846] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 11:18:59.545663 [ 7.355348] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. Jun 30 11:18:59.557678 [ 7.366305] device-mapper: uevent: version 1.0.3 Jun 30 11:18:59.569671 [ 7.370895] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Jun 30 11:18:59.581575 [ 7.451474] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 11:18:59.653683 [ 7.559096] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 11:18:59.761677 [ 7.566612] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 11:18:59.773643 Begin: Loading essential drivers ... done. Jun 30 11:19:00.349613 Begin: Running /scripts/init-premount ... done. Jun 30 11:19:03.361698 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 30 11:19:03.373632 Begin: Running /scripts/local-premount ... done. Jun 30 11:19:03.421578 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 30 11:19:03.457620 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 30 11:19:03.565634 /dev/mapper/arndale--metrocentre--vg-root: clean, 39331/1220608 files, 377979/4882432 blocks Jun 30 11:19:03.817653 done. Jun 30 11:19:03.841613 [ 11.766351] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 30 11:19:03.973617 [ 12.045987] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. Jun 30 11:19:04.249645 done. Jun 30 11:19:04.249673 Begin: Running /scripts/local-bottom ... done. Jun 30 11:19:04.297648 Begin: Running /scripts/init-bottom ... done. Jun 30 11:19:04.345609 [ 12.396995] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. Jun 30 11:19:04.597877 INIT: version 3.06 booting Jun 30 11:19:04.945718 INIT: No inittab.d directory found Jun 30 11:19:05.041694 Using makefile-style concurrent boot in runlevel S. Jun 30 11:19:05.365615 Starting hotplug events dispatcher: systemd-udevd. Jun 30 11:19:07.009646 Synthesizing the initial hotplug events (subsystems)...done. Jun 30 11:19:07.261626 Synthesizing the initial hotplug events (devices)...done. Jun 30 11:19:07.813604 Waiting for /dev to be fully populated...[ 15.829460] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 30 11:19:08.029656 [ 15.849433] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 11:19:08.053624 [ 15.949297] panfrost 11800000.gpu: clock rate = 533000000 Jun 30 11:19:08.149664 [ 15.955158] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jun 30 11:19:08.161601 [ 16.111083] panfrost 11800000.gpu: mali-t600 id 0x600 major 0x0 minor 0x0 status 0x1 Jun 30 11:19:08.317671 [ 16.117418] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,31b4dfff Jun 30 11:19:08.317709 [ 16.125584] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 Jun 30 11:19:08.329676 [ 16.137266] panfrost 11800000.gpu: shader_present=0xf l2_present=0x1 Jun 30 11:19:08.341630 [ 16.183770] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 0 Jun 30 11:19:08.389631 [ 16.241209] usb3503 usb-hub: switched to HUB mode Jun 30 11:19:08.437652 [ 16.244463] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 11:19:08.449619 [ 16.277182] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 11:19:08.485617 [ 16.345934] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 11:19:08.545674 [ 16.485908] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 11:19:08.689656 [ 16.569199] usb 1-3: new high-speed USB device number 2 using exynos-ehci Jun 30 11:19:08.773626 [ 16.596407] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 11:19:08.797670 [ 16.704633] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 11:19:08.905665 [ 16.741635] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Jun 30 11:19:08.941672 [ 16.748437] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jun 30 11:19:08.953633 [ 16.770342] hub 1-3:1.0: USB hub found Jun 30 11:19:08.965627 [ 16.772784] hub 1-3:1.0: 3 ports detected Jun 30 11:19:08.977613 [ 16.812899] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 11:19:09.013680 [ 16.949858] OF: graph: no port node found in /soc/hdmi@14530000 Jun 30 11:19:09.157592 [ 17.069291] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Jun 30 11:19:09.277599 [ 17.171980] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 11:19:09.373667 [ 17.193677] usb 1-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=77.32 Jun 30 11:19:09.397678 [ 17.200732] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Jun 30 11:19:09.409654 [ 17.207986] usb 1-3.2: Product: USB2.0 Hub Jun 30 11:19:09.409686 [ 17.214072] hub 1-3.2:1.0: USB hub found Jun 30 11:19:09.409711 [ 17.219665] hub 1-3.2:1.0: 4 ports detected Jun 30 11:19:09.421644 [ 17.258741] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 11:19:09.469592 [ 17.373443] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 11:19:09.577646 [ 17.481462] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 11:19:09.685646 [ 17.517250] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 30 11:19:09.721626 [ 17.589325] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 11:19:09.793651 [ 17.635984] usb 1-3.2.4: New USB device found, idVendor=0b95, idProduct=772a, bcdDevice= 0.01 Jun 30 11:19:09.841674 [ 17.643231] usb 1-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 30 11:19:09.853668 [ 17.650816] usb 1-3.2.4: Product: AX88772 Jun 30 11:19:09.853700 [ 17.654893] usb 1-3.2.4: Manufacturer: ASIX Elec. Corp. Jun 30 11:19:09.853727 [ 17.659976] usb 1-3.2.4: SerialNumber: 000001 Jun 30 11:19:09.865608 [ 17.697054] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 11:19:09.901687 [ 17.704580] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 11:19:09.913605 [ 18.275669] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 30 11:19:10.477660 [ 18.935806] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 11:19:11.149648 [ 18.951225] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Jun 30 11:19:11.161664 [ 18.963056] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, ca:bd:a6:e2:e0:7d Jun 30 11:19:11.173654 [ 18.977814] usbcore: registered new interface driver asix Jun 30 11:19:11.173687 done. Jun 30 11:19:11.437596 [ 19.771684] EXT4-fs (dm-0): re-mounted. Quota mode: none. Jun 30 11:19:11.977608 Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). Jun 30 11:19:12.013645 Checking file systems.../dev/sda1: clean, 922/61056 files, 25374/243968 blocks Jun 30 11:19:13.765655 done. Jun 30 11:19:13.825608 Cleaning up temporary files... /tmp. Jun 30 11:19:14.117637 [ 22.161737] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 30 11:19:14.369568 [ 22.213466] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Jun 30 11:19:14.417607 [ 22.427757] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k FS Jun 30 11:19:14.633677 Mounting local filesystems...done. Jun 30 11:19:14.945676 Activating swapfile swap, if any...done. Jun 30 11:19:14.945708 Cleaning up temporary files.... Jun 30 11:19:15.029606 Starting Setting kernel variables: sysctl. Jun 30 11:19:15.197650 [ 23.631414] audit: type=1400 audit(1719746356.848:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=883 comm="apparmor_parser" Jun 30 11:19:15.845704 [ 23.646677] audit: type=1400 audit(1719746356.848:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=883 comm="apparmor_parser" Jun 30 11:19:15.857719 [ 23.661093] audit: type=1400 audit(1719746356.864:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=882 comm="apparmor_parser" Jun 30 11:19:15.869679 [ 24.009480] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Jun 30 11:19:16.217652 [ 24.022331] audit: type=1400 audit(1719746357.240:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=926 comm="apparmor_parser" Jun 30 11:19:16.229716 [ 24.036106] audit: type=1400 audit(1719746357.240:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=926 comm="apparmor_parser" Jun 30 11:19:16.253701 [ 24.050787] audit: type=1400 audit(1719746357.244:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=926 comm="apparmor_parser" Jun 30 11:19:16.265651 [ 24.401303] audit: type=1400 audit(1719746357.616:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=925 comm="apparmor_parser" Jun 30 11:19:16.613704 [ 24.419174] audit: type=1400 audit(1719746357.620:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=925 comm="apparmor_parser" Jun 30 11:19:16.637694 [ 24.435052] audit: type=1400 audit(1719746357.620:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=925 comm="apparmor_parser" Jun 30 11:19:16.649705 [ 24.452561] audit: type=1400 audit(1719746357.628:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=925 comm="apparmor_parser" Jun 30 11:19:16.661710 Starting: AppArmorLoading AppArmor profiles...done. Jun 30 11:19:16.673650 . Jun 30 11:19:16.673678 [ 26.215125] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 30 11:19:18.413697 [ 26.221231] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jun 30 11:19:18.425653 Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1 Jun 30 11:19:19.913724 Copyright 2004-2022 Internet Systems Consortium. Jun 30 11:19:19.913758 All rights reserved. Jun 30 11:19:19.925699 For info, please visit https://www.isc.org/software/dhcp/ Jun 30 11:19:19.925734 Jun 30 11:19:19.925754 Listening on LPF/eth0/9e:04:00:59:64:5a Jun 30 11:19:19.925778 Sending on LPF/eth0/9e:04:00:59:64:5a Jun 30 11:19:19.937698 Sending on Socket/fallback Jun 30 11:19:19.937729 Created duid "\000\001\000\001.\023\373\265\236\004\000YdZ". Jun 30 11:19:19.937755 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 Jun 30 11:19:19.949639 [ 29.152538] exynos4-fb 14400000.fimd: deferred probe timeout, ignoring dependency Jun 30 11:19:21.353676 [ 29.164341] exynos-mixer 14450000.mixer: deferred probe timeout, ignoring dependency Jun 30 11:19:21.365638 [ 29.172264] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations Jun 30 11:19:21.377677 [ 29.178675] exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm]) Jun 30 11:19:21.377714 [ 29.187268] exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm]) Jun 30 11:19:21.389677 [ 29.197040] exynos-drm exynos-drm: bound 14500000.dsi (ops hdmi_enable [exynosdrm]) Jun 30 11:19:21.401635 [ 29.206134] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm]) Jun 30 11:19:21.413616 [ 29.214752] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Jun 30 11:19:21.413646 [ 29.220858] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Jun 30 11:19:21.425627 [ 29.230387] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 Jun 30 11:19:21.437593 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 Jun 30 11:19:25.097754 DHCPOFFER of 10.149.64.44 from 10.149.64.4 Jun 30 11:19:25.097848 DHCPREQUEST for 10.149.64.44 on eth0 to 255.255.255.255 port 67 Jun 30 11:19:25.109745 DHCPACK of 10.149.64.44 from 10.149.64.4 Jun 30 11:19:25.109802 bound to 10.149.64.44 -- renewal in 296 seconds. Jun 30 11:19:25.121735 done. Jun 30 11:19:25.121787 Cleaning up temporary files.... Jun 30 11:19:25.169695 Starting nftables: none Jun 30 11:19:25.265683 . Jun 30 11:19:25.661676 INIT: Entering runlevel: 2 Jun 30 11:19:25.733663 Using makefile-style concurrent boot in runlevel 2. Jun 30 11:19:25.781700 Starting Apache httpd web server: apache2. Jun 30 11:19:28.025698 Starting NTP server: ntpd2024-06-30T11:19:29 ntpd[1143]: INIT: ntpd ntpsec-1.2.2: Starting Jun 30 11:19:28.505767 2024-06-30T11:19:29 ntpd[1143]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 30 11:19:28.517682 . Jun 30 11:19:28.517733 Starting periodic command scheduler: cron. Jun 30 11:19:28.565622 Starting system message bus: dbus. Jun 30 11:19:28.769646 Starting OpenBSD Secure Shell server: sshd. Jun 30 11:19:29.672463 Jun 30 11:19:30.764474 Debian GNU/Linux 12 arndale-metrocentre ttySAC2 Jun 30 11:19:30.776458 Jun 30 11:19:30.776458 arndale-metrocentre login: INIT: Switching to r INIT: No initUsing makefile-style concurrent boot in runlevel 6. Jun 30 11:24:39.784709 Stopping SMP IRQ Balancer: irqbalance. Jun 30 11:24:39.832634 Stopping nftables: none. Jun 30 11:24:39.856687 Stopping hotplug events dispatcher: systemd-udevd. Jun 30 11:24:39.868635 Saving the system clock to /dev/rtc0. Jun 30 11:24:40.144545 Hardware Clock updated to Sun Jun 30 11:24:41 UTC 2024. Jun 30 11:24:40.156514 Stopping Apache httpd web server: apache2. Jun 30 11:24:40.996490 Asking all remaining processes to terminate...done. Jun 30 11:24:41.572732 All processes ended within 1 seconds...done. Jun 30 11:24:41.584519 Deconfiguring network interfaces...ifdown: ignoring unknown interface eth0=eth0 Jun 30 11:24:41.692540 done. Jun 30 11:24:41.692540 [ 349.672968] EXT4-fs (sda1): unmounting filesystem. Jun 30 11:24:41.872598 Deactivating swap...done. Jun 30 11:24:41.936547 Unmounting local filesystems...done. Jun 30 11:24:41.936547 [ 350.099182] EXT4-fs (dm-0): re-mounted. Quota mode: none. Jun 30 11:24:42.296546 Will now restart. Jun 30 11:24:42.680507 [ 350.526382] asix 1-3.2.4:1.0 eth0: Link is Down Jun 30 11:24:42.720485 [ 350.594081] sd 0:0:0:0: [sda] Synchronizing SCSI cache Jun 30 11:24:42.792564 [ 350.601964] wake enabled for irq 101 (gpx1-4) Jun 30 11:24:42.803984 [ 350.604846] wake enabled for irq 102 (gpx1-5) Jun 30 11:24:42.804052 [ 350.609208] wake enabled for irq 103 (gpx1-6) Jun 30 11:24:42.804099 [ 350.613542] wake enabled for irq 104 (gpx1-7) Jun 30 11:24:42.815032 [ 350.617882] wake enabled for irq 105 (gpx2-0) Jun 30 11:24:42.815032 [ 350.622221] wake enabled for irq 106 (gpx2-1) Jun 30 11:24:42.815032 [ 350.627044] reboot: Re˙ Jun 30 11:24:43.160547 Jun 30 11:24:43.160547 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 11:24:43.160547 Jun 30 11:24:43.160547 CPU: Exynos5250@1000MHz Jun 30 11:24:43.160702 Jun 30 11:24:43.160721 Board: Arndale Jun 30 11:24:43.172543 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 11:24:43.172543 ready Jun 30 11:24:43.172543 DRAM: 2 GiB Jun 30 11:24:43.172543 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 11:24:43.196507 trace: enabled Jun 30 11:24:43.232515 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 11:24:43.592520 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 11:24:43.652566 In: serial Jun 30 11:24:43.652566 Out: serial Jun 30 11:24:43.652566 Err: serial Jun 30 11:24:43.652566 SCSI: ARNDALE SCSI INIT Jun 30 11:24:43.652566 Target spinup took 0 ms. Jun 30 11:24:43.664576 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 11:24:43.664576 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 11:24:43.664576 Net: Net Initialization Skipped Jun 30 11:24:43.676574 No ethernet found. Jun 30 11:24:43.676574 Hostname: arndale-metrocentre Jun 30 11:24:43.676574 Hit any key to stop autoboot: 2  1  0 Jun 30 11:24:45.604570 (Re)start USB... Jun 30 11:24:45.604570 USB0: USB EHCI 1.00 Jun 30 11:24:45.604570 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 11:24:51.209733 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 11:24:51.209808 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 11:24:51.653721 Waiting for Ethernet connection... done. Jun 30 11:24:53.253705 BOOTP broadcast 1 Jun 30 11:24:53.253771 EHCI timed out on TD - token=0x8008d80 Jun 30 11:24:58.053707 BOOTP broadcast 2 Jun 30 11:24:58.053756 DHCP client bound to address 10.149.64.44 (5006 ms) Jun 30 11:24:58.065836 Using asx0 device Jun 30 11:24:58.065892 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 11:24:58.065941 Filename 'pxelinux.0'. Jun 30 11:24:58.065983 Load address: 0x43e00000 Jun 30 11:24:58.077639 Loading: *### Jun 30 11:24:58.089848 2.4 MiB/s Jun 30 11:24:58.089903 done Jun 30 11:24:58.089943 Bytes transferred = 42430 (a5be hex) Jun 30 11:24:58.089988 missing environment variable: pxeuuid Jun 30 11:24:58.101827 Retrieving file: pxelinux.cfg/0A95402C Jun 30 11:24:58.101886 Using asx0 device Jun 30 11:24:58.101928 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 11:24:58.113791 Filename 'pxelinux.cfg/0A95402C'. Jun 30 11:24:58.113849 Load address: 0x51000000 Jun 30 11:24:58.113892 Loading: *# Jun 30 11:24:58.113932 31.3 KiB/s Jun 30 11:24:58.113972 done Jun 30 11:24:58.114009 Bytes transferred = 65 (41 hex) Jun 30 11:24:58.125806 Config file found Jun 30 11:24:58.125862 Ignoring unknown command: serial Jun 30 11:24:58.125906 1: local Jun 30 11:24:58.125946 scanning bus for devices... Jun 30 11:24:58.125988 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 11:24:58.161826 Type: Hard Disk Jun 30 11:24:58.161882 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 11:24:58.161932 Found 1 device(s). Jun 30 11:24:58.173830 Jun 30 11:24:58.173882 SCSI device 0: Jun 30 11:24:58.173925 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 11:24:58.173974 Type: Hard Disk Jun 30 11:24:58.174016 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 11:24:58.185835 ... is now current device Jun 30 11:24:58.185892 Scanning scsi 0... Jun 30 11:24:58.185935 Found U-Boot script /boot.scr Jun 30 11:24:58.365791 1768 bytes read in 48 ms (35.2 KiB/s) Jun 30 11:24:58.413664 ## Executing script at 50000000 Jun 30 11:24:58.425791 Loading dtbs/6.10.0-rc5+/exynos5250-arndale.dtb Jun 30 11:24:58.425851 46641 bytes read in 1725 ms (26.4 KiB/s) Jun 30 11:25:00.105736 983052 bytes read in 89 ms (10.5 MiB/s) Jun 30 11:25:00.225699 Loaded xen-4.19-unstable to 0x41000000 (f000c) Jun 30 11:25:00.237732 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan Jun 30 11:25:00.249681 10785280 bytes read in 504 ms (20.4 MiB/s) Jun 30 11:25:00.745689 Loaded vmlinuz-6.10.0-rc5+ to 0x42000000 (a49200) Jun 30 11:25:00.757747 command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 11:25:00.769812 12142239 bytes read in 519 ms (22.3 MiB/s) Jun 30 11:25:01.297717 Loaded initrd.img-6.10.0-rc5+ to 0x43300000 (b9469f) Jun 30 11:25:01.309757 chosen { Jun 30 11:25:01.309811 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan"; Jun 30 11:25:01.321758 #size-cells = <0x00000001>; Jun 30 11:25:01.321815 #address-cells = <0x00000001>; Jun 30 11:25:01.321859 stdout-path = "serial2:115200n8"; Jun 30 11:25:01.321903 module@1 { Jun 30 11:25:01.321943 reg = <0x43300000 0x00b9469f>; Jun 30 11:25:01.333738 compatible = "xen,linux-initrd", "xen,multiboot-module"; Jun 30 11:25:01.333832 }; Jun 30 11:25:01.333874 module@0 { Jun 30 11:25:01.333914 bootargs = "ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Jun 30 11:25:01.357742 reg = <0x42000000 0x00a49200>; Jun 30 11:25:01.357798 compatible = "xen,linux-zimage", "xen,multiboot-module"; Jun 30 11:25:01.357846 }; Jun 30 11:25:01.357884 }; Jun 30 11:25:01.357922 Booting 0x41000000 - 0x43000000 Jun 30 11:25:01.369753 Kernel image @ 0x41000000 [ 0x000000 - 0x12f000 ] Jun 30 11:25:01.369813 ## Flattened Device Tree blob at 43000000 Jun 30 11:25:01.369858 Booting using the fdt blob at 0x43000000 Jun 30 11:25:01.381743 reserving fdt memory region: addr=43000000 size=c000 Jun 30 11:25:01.381803 Loading Device Tree to 4fff1000, end 4fffffff ... OK Jun 30 11:25:01.381851 Jun 30 11:25:01.393688 Starting kernel ...(fake run for tracing) Jun 30 11:25:01.393748 Jun 30 11:25:01.393786 Jun 30 11:25:01.393823 Starting kernel ... Jun 30 11:25:01.405676 Jun 30 11:25:01.405726 __ __ _ _ _ ___ _ _ _ Jun 30 11:25:01.453742 \ \/ /___ _ __ | || | / |/ _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Jun 30 11:25:01.453804 \ // _ \ '_ \ | || |_ | | (_) |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Jun 30 11:25:01.465803 / \ __/ | | | |__ _|| |\__, |__| |_| | | | \__ \ || (_| | |_) | | __/ Jun 30 11:25:01.465864 /_/\_\___|_| |_| |_|(_)_| /_/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Jun 30 11:25:01.477754 Jun 30 11:25:01.477805 (XEN) Xen version 4.19-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Sun Jun 30 09:16:28 UTC 2024 Jun 30 11:25:01.489755 (XEN) Latest ChangeSet: Wed Jun 26 16:07:30 2024 +0100 git:08f9b1dd9c Jun 30 11:25:01.489818 (XEN) build-id: 49321b95d54bf04a04497dcfff6064128f8c8a55 Jun 30 11:25:01.501743 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Jun 30 11:25:01.501807 (XEN) 32-bit Execution: Jun 30 11:25:01.513744 (XEN) Processor Features: 00001031:00011011 Jun 30 11:25:01.513803 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Jun 30 11:25:01.513851 (XEN) Extensions: GenericTimer Security Jun 30 11:25:01.525743 (XEN) Debug Features: 02010555 Jun 30 11:25:01.525800 (XEN) Auxiliary Features: 00000000 Jun 30 11:25:01.525843 (XEN) Memory Model Features: 10201105 20000000 Jun 30 11:25:01.537728 (XEN) 01240000 02102211 Jun 30 11:25:01.537785 (XEN) ISA Features: 02101110 13112111 21232041 Jun 30 11:25:01.537831 (XEN) 11112131 10011142 00000000 Jun 30 11:25:01.549746 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Jun 30 11:25:01.561748 (XEN) Set SYSRAM to 0000000041000074 (00200074) Jun 30 11:25:01.561807 (XEN) SMP: Allowing 2 CPUs Jun 30 11:25:01.561850 (XEN) enabled workaround for: ARM erratum 766422 Jun 30 11:25:01.573755 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Jun 30 11:25:01.573818 (XEN) GICv2 initialization: Jun 30 11:25:01.573861 (XEN) gic_dist_addr=0000000010481000 Jun 30 11:25:01.585756 (XEN) gic_cpu_addr=0000000010482000 Jun 30 11:25:01.585814 (XEN) gic_hyp_addr=0000000010484000 Jun 30 11:25:01.585859 (XEN) gic_vcpu_addr=0000000010486000 Jun 30 11:25:01.597741 (XEN) gic_maintenance_irq=25 Jun 30 11:25:01.597799 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Jun 30 11:25:01.597848 (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2) Jun 30 11:25:01.609749 (XEN) Initializing Credit2 scheduler Jun 30 11:25:01.609806 (XEN) load_precision_shift: 18 Jun 30 11:25:01.609849 (XEN) load_window_shift: 30 Jun 30 11:25:01.609891 (XEN) underload_balance_tolerance: 0 Jun 30 11:25:01.621739 (XEN) overload_balance_tolerance: -3 Jun 30 11:25:01.621796 (XEN) runqueues arrangement: socket Jun 30 11:25:01.621858 (XEN) cap enforcement granularity: 10ms Jun 30 11:25:01.633737 (XEN) load tracking window length 1073741824 ns Jun 30 11:25:01.633797 (XEN) Allocated console ring of 16 KiB. Jun 30 11:25:01.633843 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Jun 30 11:25:01.645747 (XEN) CPU0: Guest atomics will try 1 times before pausing the domain Jun 30 11:25:01.645810 (XEN) Bringing up CPU1 Jun 30 11:25:01.645851 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Jun 30 11:25:01.657734 (XEN) Brought up 2 CPUs Jun 30 11:25:01.657789 (XEN) CPU 1 booted. Jun 30 11:25:01.657830 (XEN) I/O virtualisation disabled Jun 30 11:25:01.657872 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Jun 30 11:25:01.669748 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Jun 30 11:25:01.669809 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Jun 30 11:25:01.681750 (XEN) Initializing Credit2 scheduler Jun 30 11:25:01.681808 (XEN) load_precision_shift: 18 Jun 30 11:25:01.681852 (XEN) load_window_shift: 30 Jun 30 11:25:01.681893 (XEN) underload_balance_tolerance: 0 Jun 30 11:25:01.693772 (XEN) overload_balance_tolerance: -3 Jun 30 11:25:01.693831 (XEN) runqueues arrangement: socket Jun 30 11:25:01.693874 (XEN) cap enforcement granularity: 10ms Jun 30 11:25:01.705762 (XEN) load tracking window length 1073741824 ns Jun 30 11:25:01.705823 (XEN) Adding cpu 0 to runqueue 0 Jun 30 11:25:01.705867 (XEN) First cpu on runqueue, activating Jun 30 11:25:01.705910 (XEN) Adding cpu 1 to runqueue 0 Jun 30 11:25:01.717747 (XEN) alternatives: Patching with alt table 002c2f84 -> 002c305c Jun 30 11:25:01.717809 (XEN) CPU0 will execute ICIALLU on guest exit Jun 30 11:25:01.729740 (XEN) CPU1 will execute ICIALLU on guest exit Jun 30 11:25:01.729799 (XEN) *** LOADING DOMAIN 0 *** Jun 30 11:25:01.729843 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Jun 30 11:25:01.741738 (XEN) Loading ramdisk from boot module @ 0000000043300000 Jun 30 11:25:01.741800 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Jun 30 11:25:01.741848 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Jun 30 11:25:02.317729 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Jun 30 11:25:02.317791 (XEN) Allocating PPI 16 for event channel interrupt Jun 30 11:25:02.353729 (XEN) d0: extended regions not supported for 32-bit guests Jun 30 11:25:02.353790 (XEN) Loading zImage from 0000000042000000 to 0000000067400000-0000000067e49200 Jun 30 11:25:02.365696 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d9469f Jun 30 11:25:02.461721 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b499 Jun 30 11:25:02.557737 (XEN) Initial low memory virq threshold set at 0x4000 pages. Jun 30 11:25:02.569736 (XEN) Scrubbing Free RAM in background Jun 30 11:25:02.569795 (XEN) Std. Loglevel: All Jun 30 11:25:02.569837 (XEN) Guest Loglevel: All Jun 30 11:25:02.569878 (XEN) *************************************************** Jun 30 11:25:02.581728 (XEN) WARNING: SILO mode is not enabled. Jun 30 11:25:02.581787 (XEN) It has implications on the security of the system, Jun 30 11:25:02.581835 (XEN) unless the communications have been forbidden between Jun 30 11:25:02.593739 (XEN) untrusted domains. Jun 30 11:25:02.593794 (XEN) *************************************************** Jun 30 11:25:02.593839 (XEN) 3... 2... 1... Jun 30 11:25:05.600527 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 30 11:25:05.612510 (XEN) Freed 352kB init memory. Jun 30 11:25:05.612510 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 11:25:06.737259 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Jun 30 11:25:06.762540 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Jun 30 11:25:06.762614 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Jun 30 11:25:06.775146 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Jun 30 11:25:06.775146 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 11:25:06.788554 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 11:25:06.824770 [ 0.000000] Linux version 6.10.0-rc5+ (osstest@himrod1) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Sun Jun 30 08:10:22 UTC 2024 Jun 30 11:25:06.836641 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 30 11:25:06.845794 [ 0.000000] CPU: div instructions available: patching division code Jun 30 11:25:06.845864 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 11:25:06.860656 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 11:25:06.871789 [ 0.000000] Memory policy: Data cache writealloc Jun 30 11:25:06.871849 [ 0.000000] Xen 4.19 support found Jun 30 11:25:06.871895 [ 0.000000] efi: UEFI not found. Jun 30 11:25:06.884798 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 on node -1 Jun 30 11:25:06.884798 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 11:25:06.884870 [ 0.000000] Zone ranges: Jun 30 11:25:06.896691 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Jun 30 11:25:06.896713 [ 0.000000] Normal empty Jun 30 11:25:06.896745 [ 0.000000] HighMem empty Jun 30 11:25:06.908678 [ 0.000000] Movable zone start for each node Jun 30 11:25:06.908723 [ 0.000000] Early memory node ranges Jun 30 11:25:06.908723 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Jun 30 11:25:06.920756 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Jun 30 11:25:06.920824 [ 0.000000] psci: probing for conduit method from DT. Jun 30 11:25:06.932760 [ 0.000000] psci: PSCIv1.1 detected in firmware. Jun 30 11:25:06.932826 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Jun 30 11:25:06.944759 [ 0.000000] psci: Trusted OS migration not required Jun 30 11:25:06.944759 [ 0.000000] psci: SMC Calling Convention v1.2 Jun 30 11:25:06.944862 [ 0.000000] percpu: Embedded 18 pages/cpu s41428 r8192 d24108 u73728 Jun 30 11:25:06.956781 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 11:25:06.968706 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 11:25:06.980757 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Jun 30 11:25:06.992692 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 131072 Jun 30 11:25:06.992707 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Jun 30 11:25:07.004680 [ 0.000000] Memory: 414600K/524288K available (15360K kernel code, 2268K rwdata, 6084K rodata, 2048K init, 439K bss, 44152K reserved, 65536K cma-reserved, 0K highmem) Jun 30 11:25:07.016701 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 11:25:07.028766 [ 0.000000] trace event string verifier disabled Jun 30 11:25:07.028834 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 11:25:07.028895 [ 0.000000] rcu: RCU event tracing is enabled. Jun 30 11:25:07.040757 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Jun 30 11:25:07.040831 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Jun 30 11:25:07.052760 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 11:25:07.064746 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 11:25:07.064813 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 11:25:07.076733 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 11:25:07.076800 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Jun 30 11:25:07.088603 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 11:25:07.100568 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 11:25:07.100568 [ 0.000013] Switching to timer-based delay loop, resolution 41ns Jun 30 11:25:07.112558 [ 0.000519] Console: colour dummy device 80x30 Jun 30 11:25:07.112558 [ 0.000537] printk: legacy console [hvc0] enabled Jun 30 11:25:07.124571 [ 0.299530] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Jun 30 11:25:07.124571 [ 0.309927] CPU: Testing write buffer coherency: ok Jun 30 11:25:07.136570 [ 0.314870] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 11:25:07.148619 [ 0.324423] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 11:25:07.148631 [ 0.330836] pid_max: default: 32768 minimum: 301 Jun 30 11:25:07.160559 [ 0.335623] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 11:25:07.160559 [ 0.342904] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 11:25:07.172572 [ 0.351328] /cpus/cpu@0 missing clock-frequency property Jun 30 11:25:07.172572 [ 0.356106] /cpus/cpu@1 missing clock-frequency property Jun 30 11:25:07.184601 [ 0.361524] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 11:25:07.184601 [ 0.368218] xen:grant_table: Grant tables using version 1 layout Jun 30 11:25:07.196604 [ 0.373358] Grant table initialized Jun 30 11:25:07.196604 [ 0.376906] xen:events: Using FIFO-based ABI Jun 30 11:25:07.196604 [ 0.381209] Xen: initializing cpu0 Jun 30 11:25:07.208551 [ 0.384733] Setting up static identity map for 0x60300000 - 0x603000ac Jun 30 11:25:07.208551 [ 0.392527] rcu: Hierarchical SRCU implementation. Jun 30 11:25:07.220561 [ 0.396127] rcu: Max phase no-delay instances is 1000. Jun 30 11:25:07.220561 [ 0.404357] EFI services will not be available. Jun 30 11:25:07.232558 [ 0.407676] smp: Bringing up secondary CPUs ... Jun 30 11:25:07.232558 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 11:25:07.304576 [ 0.481919] Xen: initializing cpu1 Jun 30 11:25:07.304576 [ 0.482077] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 11:25:07.316577 [ 0.482101] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 11:25:07.316577 [ 0.501071] smp: Brought up 1 node, 2 CPUs Jun 30 11:25:07.328675 [ 0.504732] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 11:25:07.328745 [ 0.511018] CPU: All CPU(s) started in SVC mode. Jun 30 11:25:07.340519 [ 0.516932] devtmpfs: initialized Jun 30 11:25:07.340519 [ 0.529279] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 11:25:07.352592 [ 0.535827] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Jun 30 11:25:07.364577 [ 0.545500] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 11:25:07.376569 [ 0.553418] pinctrl core: initialized pinctrl subsystem Jun 30 11:25:07.376569 [ 0.560021] DMI not present or invalid. Jun 30 11:25:07.376569 [ 0.563533] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 11:25:07.388577 [ 0.570154] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 11:25:07.400536 [ 0.579485] thermal_sys: Registered thermal governor 'step_wise' Jun 30 11:25:07.400536 [ 0.579642] software IO TLB: area num 2. Jun 30 11:25:07.412552 [ 0.588311] software IO TLB: only able to allocate 8 MB Jun 30 11:25:07.412552 [ 0.595384] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Jun 30 11:25:07.424596 [ 0.600585] No ATAGs? Jun 30 11:25:07.424596 [ 0.602889] hw-breakpoint: Failed to enable monitor mode on CPU 0. Jun 30 11:25:07.424596 [ 0.611598] Serial: AMBA PL011 UART driver Jun 30 11:25:07.436547 [ 0.658220] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 65 Jun 30 11:25:07.484536 [ 0.686660] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 30 11:25:07.508725 [ 0.710575] xen:balloon: Initialising balloon driver Jun 30 11:25:07.532884 [ 0.717031] iommu: Default domain type: Translated Jun 30 11:25:07.544649 [ 0.720438] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 11:25:07.544701 [ 0.729265] SCSI subsystem initialized Jun 30 11:25:07.556655 [ 0.732026] usbcore: registered new interface driver usbfs Jun 30 11:25:07.556707 [ 0.737263] usbcore: registered new interface driver hub Jun 30 11:25:07.556707 [ 0.742601] usbcore: registered new device driver usb Jun 30 11:25:07.568617 [ 0.749319] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 11:25:07.568702 [ 0.752914] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 11:25:07.580619 [ 0.759176] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 11:25:07.580704 [ 0.764235] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 11:25:07.592648 [ 0.769164] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 11:25:07.592699 [ 0.775204] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 11:25:07.604610 [ 0.780979] pps_core: LinuxPPS API ver. 1 registered Jun 30 11:25:07.604687 [ 0.785373] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 11:25:07.616620 [ 0.794600] PTP clock support registered Jun 30 11:25:07.616620 [ 0.798833] EDAC MC: Ver: 3.0.0 Jun 30 11:25:07.616714 [ 0.802093] scmi_core: SCMI protocol bus registered Jun 30 11:25:07.628623 [ 0.808783] vgaarb: loaded Jun 30 11:25:07.628623 [ 0.811954] clocksource: Switched to clocksource arch_sys_counter Jun 30 11:25:07.640600 [ 0.829132] NET: Registered PF_INET protocol family Jun 30 11:25:07.652047 [ 0.832804] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Jun 30 11:25:07.664527 [ 0.840672] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 11:25:07.664527 [ 0.848393] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 11:25:07.676523 [ 0.856177] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Jun 30 11:25:07.688526 [ 0.864010] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Jun 30 11:25:07.688526 [ 0.871286] TCP: Hash tables configured (established 4096 bind 4096) Jun 30 11:25:07.700542 [ 0.877662] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 11:25:07.700542 [ 0.884229] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 11:25:07.712535 [ 0.891322] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 11:25:07.712535 [ 0.897487] RPC: Registered named UNIX socket transport module. Jun 30 11:25:07.724536 [ 0.902962] RPC: Registered udp transport module. Jun 30 11:25:07.724536 [ 0.907718] RPC: Registered tcp transport module. Jun 30 11:25:07.736548 [ 0.912515] RPC: Registered tcp-with-tls transport module. Jun 30 11:25:07.736548 [ 0.918067] RPC: Registered tcp NFSv4.1 backchannel transport module. Jun 30 11:25:07.748520 [ 0.924578] PCI: CLS 0 bytes, default 64 Jun 30 11:25:07.748520 [ 0.929980] Initialise system trusted keyrings Jun 30 11:25:07.748520 [ 0.933297] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Jun 30 11:25:07.760545 [ 0.939820] squashfs: version 4.0 (2009/01/31) Phillip Lougher Jun 30 11:25:07.760545 [ 0.945705] NFS: Registering the id_resolver key type Jun 30 11:25:07.772546 [ 0.950626] Key type id_resolver registered Jun 30 11:25:07.772546 [ 0.954866] Key type id_legacy registered Jun 30 11:25:07.784550 [ 0.958969] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Jun 30 11:25:07.784550 [ 0.965724] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Jun 30 11:25:07.796498 [ 0.973435] Trying to unpack rootfs image as initramfs... Jun 30 11:25:07.796498 [ 0.994769] Key type asymmetric registered Jun 30 11:25:07.817669 [ 0.997511] Asymmetric key parser 'x509' registered Jun 30 11:25:07.817702 [ 1.002572] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) Jun 30 11:25:07.829664 [ 1.009924] io scheduler mq-deadline registered Jun 30 11:25:07.829696 [ 1.014544] io scheduler kyber registered Jun 30 11:25:07.829720 [ 1.018653] io scheduler bfq registered Jun 30 11:25:07.841613 [ 1.160046] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 11:25:07.985662 [ 1.166295] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 11:25:07.997641 [ 1.206169] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 11:25:08.033648 [ 1.212410] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 11:25:08.033687 [ 1.254936] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 11:25:08.081662 [ 1.261149] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 11:25:08.081702 [ 1.312200] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 11:25:08.129795 [ 1.318436] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 11:25:08.141820 [ 1.331193] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 11:25:08.153844 [ 1.405461] xen:xen_evtchn: Event-channel device installed Jun 30 11:25:08.225713 [ 1.435968] Freeing initrd memory: 11860K Jun 30 11:25:08.249684 [ 1.486069] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 11:25:08.309723 [ 1.497005] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 11:25:08.321787 [ 1.505185] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 11:25:08.333700 [ 1.514090] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 11:25:08.333758 [ 1.523067] SuperH (H)SCI(F) driver initialized Jun 30 11:25:08.345738 [ 1.527387] STMicroelectronics ASC driver initialized Jun 30 11:25:08.345799 [ 1.532297] STM32 USART driver initialized Jun 30 11:25:08.357695 [ 1.537686] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 11:25:08.357752 [ 1.546594] random: crng init done Jun 30 11:25:08.369679 [ 1.556960] brd: module loaded Jun 30 11:25:08.369730 [ 1.562911] loop: module loaded Jun 30 11:25:08.381710 [ 1.578440] Invalid max_queues (4), will use default max: 2. Jun 30 11:25:08.393688 [ 1.597060] tun: Universal TUN/TAP device driver, 1.6 Jun 30 11:25:08.417712 [ 1.600919] CAN device driver interface Jun 30 11:25:08.417763 [ 1.606056] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Jun 30 11:25:08.429740 [ 1.617193] xen_netfront: Initialising Xen virtual ethernet driver Jun 30 11:25:08.441665 [ 1.622066] pegasus: Pegasus/Pegasus II USB Ethernet driver Jun 30 11:25:08.441707 [ 1.627665] usbcore: registered new interface driver pegasus Jun 30 11:25:08.453698 [ 1.633407] usbcore: registered new interface driver asix Jun 30 11:25:08.453753 [ 1.638884] usbcore: registered new interface driver ax88179_178a Jun 30 11:25:08.465740 [ 1.645033] usbcore: registered new interface driver cdc_ether Jun 30 11:25:08.465797 [ 1.650926] usbcore: registered new interface driver smsc75xx Jun 30 11:25:08.477700 [ 1.656751] usbcore: registered new interface driver smsc95xx Jun 30 11:25:08.477754 [ 1.662572] usbcore: registered new interface driver net1080 Jun 30 11:25:08.489732 [ 1.668308] usbcore: registered new interface driver cdc_subset Jun 30 11:25:08.489811 [ 1.674285] usbcore: registered new interface driver zaurus Jun 30 11:25:08.501732 [ 1.679924] usbcore: registered new interface driver cdc_ncm Jun 30 11:25:08.501795 [ 1.689319] usbcore: registered new interface driver usb-storage Jun 30 11:25:08.513950 [ 1.699811] i2c_dev: i2c /dev entries driver Jun 30 11:25:08.514029 [ 1.718097] device-mapper: uevent: version 1.0.3 Jun 30 11:25:08.537621 [ 1.721516] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev Jun 30 11:25:08.549662 [ 1.731106] cpu cpu0: OPP table can't be empty Jun 30 11:25:08.549719 [ 1.735837] failed to register cpuidle driver Jun 30 11:25:08.561659 [ 1.739221] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Jun 30 11:25:08.561724 [ 1.747553] sdhci: Secure Digital Host Controller Interface driver Jun 30 11:25:08.573666 [ 1.752602] sdhci: Copyright(c) Pierre Ossman Jun 30 11:25:08.573748 [ 1.760620] sdhci-pltfm: SDHCI platform and OF driver helper Jun 30 11:25:08.585661 [ 1.768542] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 11:25:08.585696 [ 1.773978] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Jun 30 11:25:08.597643 [ 1.780606] usbcore: registered new interface driver usbhid Jun 30 11:25:08.597677 [ 1.785328] usbhid: USB HID core driver Jun 30 11:25:08.609697 [ 1.796214] NET: Registered PF_INET6 protocol family Jun 30 11:25:08.621738 [ 1.801641] Segment Routing with IPv6 Jun 30 11:25:08.621796 [ 1.803988] In-situ OAM (IOAM) with IPv6 Jun 30 11:25:08.621842 [ 1.807991] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Jun 30 11:25:08.633669 [ 1.814404] NET: Registered PF_PACKET protocol family Jun 30 11:25:08.633729 [ 1.819071] can: controller area network core Jun 30 11:25:08.645652 [ 1.823538] NET: Registered PF_CAN protocol family Jun 30 11:25:08.645686 [ 1.828342] can: raw protocol Jun 30 11:25:08.645710 [ 1.831362] can: broadcast manager protocol Jun 30 11:25:08.657679 [ 1.835634] can: netlink gateway - max_hops=1 Jun 30 11:25:08.657740 [ 1.840366] Key type dns_resolver registered Jun 30 11:25:08.657789 [ 1.845060] ThumbEE CPU extension supported. Jun 30 11:25:08.669654 [ 1.848724] Registering SWP/SWPB emulation handler Jun 30 11:25:08.669687 [ 1.863158] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level Jun 30 11:25:08.681812 [ 1.870030] Loading compiled-in X.509 certificates Jun 30 11:25:08.693705 [ 1.913928] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 11:25:08.733774 [ 1.917529] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 11:25:08.745762 [ 1.924223] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 11:25:08.745836 [ 1.932336] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 11:25:08.757740 [ 1.973784] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 11:25:08.793700 [ 1.982643] s5m-rtc s5m-rtc: setting system clock to 2024-06-30T11:25:10 UTC (1719746710) Jun 30 11:25:08.805743 [ 1.993660] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 11:25:08.817773 [ 1.998263] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 11:25:08.817834 [ 2.002700] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 11:25:08.829831 [ 2.009372] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 11:25:08.829894 [ 2.015308] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 11:25:08.841765 [ 2.021443] clk: Not disabling unused clocks Jun 30 11:25:08.841825 [ 2.025027] PM: genpd: Disabling unused power domains Jun 30 11:25:08.841873 [ 2.033578] Freeing unused kernel image (initmem) memory: 2048K Jun 30 11:25:08.853732 [ 2.039928] Run /init as init process Jun 30 11:25:08.853789 Loading, please wait... Jun 30 11:25:08.889682 Starting systemd-udevd version 252.26-1~deb12u2 Jun 30 11:25:08.949739 [ 3.279098] i2c-gpio i2c-10: using lines 552 (SDA) and 553 (SCL) Jun 30 11:25:10.105698 [ 3.405998] Synopsys Designware Multimedia Card Interface Driver Jun 30 11:25:10.233713 [ 3.424302] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 11:25:10.249801 [ 3.452821] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 11:25:10.281748 [ 3.470022] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 30 11:25:10.297743 [ 3.477067] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 30 11:25:10.297807 [ 3.510367] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 30 11:25:10.329725 [ 3.525563] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 30 11:25:10.345682 [ 3.535875] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 30 11:25:10.361826 [ 3.561682] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 30 11:25:10.393785 [ 3.562516] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 11:25:10.393855 [ 3.567424] ahci-dwc 122f0000.sata: AHCI vers 0001.0300, 32 command slots, 6 Gbps, platform mode Jun 30 11:25:10.409765 [ 3.584374] ahci-dwc 122f0000.sata: 1/1 ports implemented (port mask 0x1) Jun 30 11:25:10.409830 [ 3.591156] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 30 11:25:10.425725 [ 3.608057] phy phy-12130000.phy.9: phy_power_on was called before phy_init Jun 30 11:25:10.425790 [ 3.613744] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 11:25:10.441772 [ 3.619250] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Jun 30 11:25:10.441840 [ 3.665900] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 11:25:10.485733 [ 3.777476] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 30 11:25:10.593791 [ 3.782615] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 30 11:25:10.605795 [ 3.788091] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 125,32 bit host data width,128 deep fifo Jun 30 11:25:10.617787 [ 3.797990] mmc_host mmc0: card is polling. Jun 30 11:25:10.617845 [ 3.802121] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 30 11:25:10.629781 [ 3.808356] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 30 11:25:10.629842 [ 3.813910] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo Jun 30 11:25:10.641807 [ 3.814591] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 11:25:10.657757 [ 3.842316] exynos-ehci 12110000.usb: irq 128, io mem 0x12110000 Jun 30 11:25:10.669784 [ 3.843011] scsi host0: ahci-dwc Jun 30 11:25:10.669842 [ 3.852586] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 11:25:10.681725 [ 3.872317] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 11:25:10.693787 [ 3.875058] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 127 lpm-pol 0 Jun 30 11:25:10.705787 [ 3.878667] hub 1-0:1.0: USB hub found Jun 30 11:25:10.705844 [ 3.890138] hub 1-0:1.0: 3 ports detected Jun 30 11:25:10.705889 [ 3.903753] phy phy-12130000.phy.9: phy_power_on was called before phy_init Jun 30 11:25:10.729781 [ 3.909420] exynos-ohci 12120000.usb: USB Host Controller Jun 30 11:25:10.729843 [ 3.915704] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Jun 30 11:25:10.741779 [ 3.925192] exynos-ohci 12120000.usb: irq 128, io mem 0x12120000 Jun 30 11:25:10.741840 [ 4.002695] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 30 11:25:10.825791 [ 4.011792] hub 2-0:1.0: USB hub found Jun 30 11:25:10.837763 [ 4.016968] hub 2-0:1.0: 3 ports detected Jun 30 11:25:10.837823 [ 4.021375] mmc0: new DDR MMC card at address 0001 Jun 30 11:25:10.837900 [ 4.027978] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Jun 30 11:25:10.849747 [ 4.037685] mmcblk0: p1 p2 p3 p4 Jun 30 11:25:10.861770 [ 4.042175] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Jun 30 11:25:10.861831 [ 4.047018] s3c-rtc 101e0000.rtc: registered as rtc1 Jun 30 11:25:10.873750 [ 4.052289] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Jun 30 11:25:10.873811 [ 4.059370] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Jun 30 11:25:10.885728 [ 4.065407] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Jun 30 11:25:10.885793 [ 4.087140] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 11:25:10.909769 [ 4.105949] mmc1: new high speed SDHC card at address aaaa Jun 30 11:25:10.921755 [ 4.111071] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Jun 30 11:25:10.933730 [ 4.422061] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 30 11:25:11.245774 [ 4.427824] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 30 11:25:11.245840 [ 4.433689] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 30 11:25:11.257802 [ 4.441352] ata1.00: configured for UDMA/133 Jun 30 11:25:11.257861 [ 4.444986] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 30 11:25:11.269789 [ 4.454541] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 30 11:25:11.281791 [ 4.460656] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 30 11:25:11.281851 [ 4.466193] sd 0:0:0:0: [sda] Write Protect is off Jun 30 11:25:11.281897 [ 4.470897] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 30 11:25:11.293753 [ 4.480107] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 30 11:25:11.305713 [ 4.508423] sda: sda1 sda2 < sda5 > Jun 30 11:25:11.329760 [ 4.511395] sd 0:0:0:0: [sda] Attached SCSI disk Jun 30 11:25:11.329819 [ 4.539634] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Jun 30 11:25:11.365766 [ 4.547668] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 11:25:11.365828 [ 4.551811] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 11:25:11.377728 [ 4.634897] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002000010 Jun 30 11:25:11.461780 [ 4.643191] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Jun 30 11:25:11.461841 [ 4.649288] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 11:25:11.473738 [ 4.654658] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 11:25:11.473805 [ 4.662346] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 11:25:11.485745 [ 4.673581] hub 3-0:1.0: USB hub found Jun 30 11:25:11.497751 [ 4.676019] hub 3-0:1.0: 1 port detected Jun 30 11:25:11.497810 [ 4.680777] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 11:25:11.509728 [ 4.694326] hub 4-0:1.0: USB hub found Jun 30 11:25:11.509785 [ 4.697186] hub 4-0:1.0: 1 port detected Jun 30 11:25:11.521706 [ 4.925885] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 11:25:11.749750 [ 5.080788] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 11:25:11.905708 [ 5.218024] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 11:25:12.037771 [ 5.326306] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 11:25:12.145762 [ 5.434544] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 11:25:12.253705 [ 5.542749] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 11:25:12.361748 [ 5.871300] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 11:25:12.697778 [ 6.042440] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 11:25:12.865756 [ 6.156804] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 11:25:12.985707 [ 6.264560] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 11:25:13.093702 [ 6.372325] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 11:25:13.201690 [ 6.480035] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 11:25:13.309725 [ 6.487651] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 11:25:13.309794 Begin: Loading essential drivers ... done. Jun 30 11:25:13.369696 Begin: Running /scripts/init-premount ... done. Jun 30 11:25:16.381667 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 30 11:25:16.393666 Begin: Running /scripts/local-premount ... done. Jun 30 11:25:16.405611 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 30 11:25:16.501627 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 30 11:25:16.585665 /dev/mapper/arndale--metrocentre--vg-root: clean, 46073/1220608 files, 606043/4882432 blocks Jun 30 11:25:16.849599 done. Jun 30 11:25:16.861647 [ 10.047430] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 30 11:25:16.873629 [ 10.394289] EXT4-fs (dm-0): mounted filesystem 6d7cbd16-9d9e-4fad-ac36-3fc06fbe17cc ro with ordered data mode. Quota mode: disabled. Jun 30 11:25:17.221629 done. Jun 30 11:25:17.221659 Begin: Running /scripts/local-bottom ... done. Jun 30 11:25:17.305641 Begin: Running /scripts/init-bottom ... done. Jun 30 11:25:17.353616 INIT: version 3.06 booting Jun 30 11:25:17.893630 INIT: No inittab.d directory found Jun 30 11:25:17.977625 Using makefile-style concurrent boot in runlevel S. Jun 30 11:25:18.277659 Starting hotplug events dispatcher: systemd-udevd. Jun 30 11:25:19.813748 Synthesizing the initial hotplug events (subsystems)...done. Jun 30 11:25:20.257719 Synthesizing the initial hotplug events (devices)...done. Jun 30 11:25:21.161720 Waiting for /dev to be fully populated...[ 14.380822] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 30 11:25:21.209694 [ 14.452114] s5p-secss 10830000.sss: s5p-sss driver registered Jun 30 11:25:21.269686 [ 14.493814] mc: Linux media interface: v0.10 Jun 30 11:25:21.317694 [ 14.719911] videodev: Linux video capture interface: v2.00 Jun 30 11:25:21.545713 [ 14.899183] exynos-gsc 13e00000.gsc: Adding to iommu group 0 Jun 30 11:25:21.725782 [ 14.905227] exynos-gsc 13e10000.gsc: Adding to iommu group 1 Jun 30 11:25:21.725864 [ 14.910702] exynos-gsc 13e20000.gsc: Adding to iommu group 2 Jun 30 11:25:21.737739 [ 14.916497] exynos-gsc 13e30000.gsc: Adding to iommu group 3 Jun 30 11:25:21.737801 [ 14.957722] s5p-mfc 11000000.codec: Adding to iommu group 4 Jun 30 11:25:21.785682 [ 15.010612] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Jun 30 11:25:21.833750 [ 15.086325] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 11:25:21.917703 [ 15.110333] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 11:25:21.941748 [ 15.117839] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 11:25:21.953728 [ 15.122645] usb3503 usb-hub: switched to HUB mode Jun 30 11:25:21.953784 [ 15.128786] s5p-mfc 11000000.codec: decoder registered as /dev/video4 Jun 30 11:25:21.953835 [ 15.133009] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 11:25:21.965806 [ 15.139670] s5p-mfc 11000000.codec: encoder registered as /dev/video5 Jun 30 11:25:21.965871 [ 15.164586] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 11:25:21.989752 [ 15.338440] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 11:25:22.169663 [ 15.468171] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Jun 30 11:25:22.289752 [ 15.482006] usb 1-3: new high-speed USB device number 2 using exynos-ehci Jun 30 11:25:22.301746 [ 15.505998] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 11:25:22.337737 [ 15.518729] wm8994 3-001a: Device is not a WM8994, ID is 0 Jun 30 11:25:22.337799 [ 15.524580] wm8994 3-001a: probe with driver wm8994 failed with error -22 Jun 30 11:25:22.349711 [ 15.615441] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 11:25:22.445706 [ 15.727233] hub 1-3:1.0: USB hub found Jun 30 11:25:22.553755 [ 15.730835] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 11:25:22.553827 [ 15.742029] hub 1-3:1.0: 3 ports detected Jun 30 11:25:22.565710 [ 15.839294] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 11:25:22.661754 [ 15.970463] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 11:25:22.793768 [ 15.978241] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 11:25:22.805836 [ 15.987051] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 11:25:22.817655 [ 16.015190] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 11:25:22.841836 [ 16.022939] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 11:25:22.853681 [ 16.031556] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 11:25:22.865770 [ 16.063139] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Jun 30 11:25:22.889804 [ 16.214577] hub 1-3.2:1.0: USB hub found Jun 30 11:25:23.033736 [ 16.217637] hub 1-3.2:1.0: 4 ports detected Jun 30 11:25:23.045685 [ 16.257878] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 11:25:23.081754 [ 16.346244] usbcore: registered new device driver onboard-usb-dev Jun 30 11:25:23.165729 [ 16.433171] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 11:25:23.261696 [ 16.474978] hub 1-3.2:1.0: USB hub found Jun 30 11:25:23.297745 [ 16.477925] hub 1-3.2:1.0: 4 ports detected Jun 30 11:25:23.297808 [ 16.489797] hub 1-3.2:1.0: USB hub found Jun 30 11:25:23.309720 [ 16.492761] hub 1-3.2:1.0: 4 ports detected Jun 30 11:25:23.321689 [ 16.554798] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 11:25:23.381731 [ 16.663105] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 11:25:23.489734 [ 16.701984] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 30 11:25:23.525731 [ 16.770830] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 11:25:23.597759 [ 16.855253] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 30 11:25:23.685728 [ 16.878574] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 11:25:23.705655 [ 16.886202] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 11:25:23.717704 [ 17.533753] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 11:25:24.365758 [ 17.548123] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Jun 30 11:25:24.377740 [ 17.558022] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 3e:70:cb:a0:16:62 Jun 30 11:25:24.389693 done. Jun 30 11:25:24.605655 [ 18.208678] EXT4-fs (dm-0): re-mounted 6d7cbd16-9d9e-4fad-ac36-3fc06fbe17cc r/w. Quota mode: disabled. Jun 30 11:25:25.037709 Checking file systems.../dev/sda1: clean, 2179/61056 files, 44461/243968 blocks Jun 30 11:25:26.670903 done. Jun 30 11:25:26.693610 Cleaning up temporary files... /tmp. Jun 30 11:25:26.900728 [ 20.276476] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 30 11:25:27.104639 [ 20.328412] EXT4-fs (sda1): mounted filesystem d8c229f3-a890-437a-ae68-bb339d80335b r/w with ordered data mode. Quota mode: disabled. Jun 30 11:25:27.164626 [ 20.428754] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k Jun 30 11:25:27.260602 Mounting local filesystems...done. Jun 30 11:25:27.492601 Activating swapfile swap, if any...done. Jun 30 11:25:27.492674 Cleaning up temporary files.... Jun 30 11:25:27.528486 Starting Setting kernel variables: sysctl. Jun 30 11:25:27.716530 [ 22.276398] xenbr0: port 1(eth0) entered blocking state Jun 30 11:25:29.093788 [ 22.280260] xenbr0: port 1(eth0) entered disabled state Jun 30 11:25:29.105751 [ 22.285620] asix 1-3.2.4:1.0 eth0: entered allmulticast mode Jun 30 11:25:29.105812 [ 22.291423] asix 1-3.2.4:1.0 eth0: entered promiscuous mode Jun 30 11:25:29.117733 [ 22.303247] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Jun 30 11:25:29.129597 Configuring network interfaces...RTNETLINK answers: Operation not supported Jun 30 11:25:30.953737 Jun 30 11:25:30.953796 Waiting for xenbr0 to get ready (MAXWAIT is 2 seconds). Jun 30 11:25:30.953845 [ 24.499126] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 30 11:25:31.325760 [ 24.505201] xenbr0: port 1(eth0) entered blocking state Jun 30 11:25:31.325820 [ 24.510368] xenbr0: port 1(eth0) entered forwarding state Jun 30 11:25:31.337681 done. Jun 30 11:25:31.505693 Cleaning up temporary files.... Jun 30 11:25:31.565696 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Jun 30 11:25:31.613718 Starting nftables: none Jun 30 11:25:31.649708 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Jun 30 11:25:31.781761 failed! Jun 30 11:25:31.781819 startpar: service(s) returned failure: nftables ... failed! Jun 30 11:25:31.793652 INIT: Entering runlevel: 2 Jun 30 11:25:31.805653 Using makefile-style concurrent boot in runlevel 2. Jun 30 11:25:31.817657 Starting Apache httpd web server: apache2AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.149.64.44. Set the 'ServerName' directive globally to suppress this message Jun 30 11:25:32.717668 [ 26.893819] platform sound: deferred probe pending: arndale-audio: snd_soc_register_card() failed Jun 30 11:25:33.725634 . Jun 30 11:25:33.797614 Starting SMP IRQ Balancer: irqbalance. Jun 30 11:25:34.205650 Starting NTP server: ntpd2024-06-30T11:25:35 ntpd[1139]: INIT: ntpd ntpsec-1.2.2: Starting Jun 30 11:25:34.277701 2024-06-30T11:25:35 ntpd[1139]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 30 11:25:34.289695 . Jun 30 11:25:34.289722 Starting system message bus: dbus. Jun 30 11:25:34.757654 Starting OpenBSD Secure Shell server: sshd. Jun 30 11:25:35.465654 Starting /usr/local/sbin/oxenstored... Jun 30 11:25:37.721713 Setting domain 0 name, domid and JSON config... Jun 30 11:25:37.721754 Done setting up Dom0 Jun 30 11:25:37.721777 Starting xenconsoled... Jun 30 11:25:37.733641 Starting QEMU as disk backend for dom0 Jun 30 11:25:37.733674 Jun 30 11:25:38.813652 Debian GNU/Linux 12 arndale-metrocentre hvc0 Jun 30 11:25:38.813712 Jun 30 11:25:38.813735 arndale-metrocentre login: [ 69.745781] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 11:26:16.565825 [ 69.886782] EXT4-fs (dm-2): mounted filesystem 95168dbd-bc04-4f4d-8bd8-d096ac78ab9a r/w with ordered data mode. Quota mode: disabled. Jun 30 11:26:16.721738 [ 71.479451] EXT4-fs (dm-2): unmounting filesystem 95168dbd-bc04-4f4d-8bd8-d096ac78ab9a. Jun 30 11:26:18.305806 [ 88.734985] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 11:26:35.557771 [ 88.876640] EXT4-fs (dm-2): mounted filesystem 95168dbd-bc04-4f4d-8bd8-d096ac78ab9a r/w with ordered data mode. Quota mode: disabled. Jun 30 11:26:35.701755 [ 90.596347] xenbr0: port 2(vif1.0) entered blocking state Jun 30 11:26:37.417817 [ 90.600382] xenbr0: port 2(vif1.0) entered disabled state Jun 30 11:26:37.417899 [ 90.605945] vif vif-1-0 vif1.0: entered allmulticast mode Jun 30 11:26:37.429742 [ 90.611520] vif vif-1-0 vif1.0: entered promiscuous mode Jun 30 11:26:37.429803 (XEN) d1v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 11:26:41.485759 (XEN) d1v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 11:26:41.605690 (XEN) d1v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 11:26:41.641736 (XEN) common/grant_table.c:1909:d1v0 Expanding d1 grant table from 1 to 2 frames Jun 30 11:26:44.473856 (XEN) common/grant_table.c:1909:d1v0 Expanding d1 grant table from 2 to 3 frames Jun 30 11:26:44.473943 [ 97.740266] vif vif-1-0 vif1.0: Guest Rx ready Jun 30 11:26:44.557825 [ 97.743919] xenbr0: port 2(vif1.0) entered blocking state Jun 30 11:26:44.569781 [ 97.749015] xenbr0: port 2(vif1.0) entered forwarding state Jun 30 11:26:44.569845 (XEN) gnttab_mark_dirty not implemented yet Jun 30 11:26:44.605748 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 11:27:17.864566 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 11:33:59.261711 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 11:40:39.645736 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 11:47:21.049750 [ 1543.620105] xenbr0: port 2(vif1.0) entered disabled state Jun 30 11:50:50.429722 [ 1561.284340] xenbr0: port 2(vif1.0) entered disabled state Jun 30 11:51:08.093728 [ 1561.292331] vif vif-1-0 vif1.0 (unregistering): left allmulticast mode Jun 30 11:51:08.105687 [ 1561.297565] vif vif-1-0 vif1.0 (unregistering): left promiscuous mode Jun 30 11:51:08.105722 [ 1561.304135] xenbr0: port 2(vif1.0) entered disabled state Jun 30 11:51:08.117632 [ 1564.701535] EXT4-fs (dm-2): unmounting filesystem 95168dbd-bc04-4f4d-8bd8-d096ac78ab9a. Jun 30 11:51:11.513660 [ 1577.299164] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 11:51:24.113670 [ 1577.451724] EXT4-fs (dm-2): mounted filesystem 95168dbd-bc04-4f4d-8bd8-d096ac78ab9a r/w with ordered data mode. Quota mode: disabled. Jun 30 11:51:24.269633 [ 1578.010110] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Jun 30 11:51:24.821688 [ 1578.026277] xvda: xvda1 xvda2 xvda3 < xvda5 > Jun 30 11:51:24.833655 [ 1588.293813] xenbr0: port 2(vif2.0) entered blocking state Jun 30 11:51:35.101790 [ 1588.297853] xenbr0: port 2(vif2.0) entered disabled state Jun 30 11:51:35.101865 [ 1588.303368] vif vif-2-0 vif2.0: entered allmulticast mode Jun 30 11:51:35.113725 [ 1588.308943] vif vif-2-0 vif2.0: entered promiscuous mode Jun 30 11:51:35.113788 (XEN) d2v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 11:51:39.313658 (XEN) d2v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 11:51:39.421642 (XEN) d2v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 11:51:39.469630 (XEN) common/grant_table.c:1909:d2v0 Expanding d2 grant table from 1 to 2 frames Jun 30 11:51:42.445713 (XEN) common/grant_table.c:1909:d2v0 Expanding d2 grant table from 2 to 3 frames Jun 30 11:51:42.457752 [ 1595.745521] vif vif-2-0 vif2.0: Guest Rx ready Jun 30 11:51:42.553730 [ 1595.749804] xenbr0: port 2(vif2.0) entered blocking state Jun 30 11:51:42.553791 [ 1595.758714] xenbr0: port 2(vif2.0) entered forwarding state Jun 30 11:51:42.565715 [ 1634.980892] xenbr0: port 2(vif2.0) entered disabled state Jun 30 11:52:21.784758 [ 1635.172563] xenbr0: port 2(vif2.0) entered disabled state Jun 30 11:52:21.976568 [ 1635.180676] vif vif-2-0 vif2.0 (unregistering): left allmulticast mode Jun 30 11:52:21.988616 [ 1635.185890] vif vif-2-0 vif2.0 (unregistering): left promiscuous mode Jun 30 11:52:22.000576 [ 1635.192386] xenbr0: port 2(vif2.0) entered disabled state Jun 30 11:52:22.000576 [ 1661.655864] EXT4-fs (dm-2): unmounting filesystem 95168dbd-bc04-4f4d-8bd8-d096ac78ab9a. Jun 30 11:52:48.469741 [ 1662.981171] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 11:52:49.789724 [ 1663.122687] EXT4-fs (dm-2): mounted filesystem 95168dbd-bc04-4f4d-8bd8-d096ac78ab9a r/w with ordered data mode. Quota mode: disabled. Jun 30 11:52:49.933741 [ 1663.623976] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Jun 30 11:52:50.437719 [ 1663.641844] xvda: xvda1 xvda2 xvda3 < xvda5 > Jun 30 11:52:50.449689 [ 1671.848952] xenbr0: port 2(vif3.0) entered blocking state Jun 30 11:52:58.649747 [ 1671.853064] xenbr0: port 2(vif3.0) entered disabled state Jun 30 11:52:58.664368 [ 1671.858486] vif vif-3-0 vif3.0: entered allmulticast mode Jun 30 11:52:58.664464 [ 1671.864158] vif vif-3-0 vif3.0: entered promiscuous mode Jun 30 11:52:58.673693 (XEN) d3v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 11:53:02.861698 (XEN) d3v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 11:53:02.981669 (XEN) d3v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 11:53:03.017698 (XEN) common/grant_table.c:1909:d3v0 Expanding d3 grant table from 1 to 2 frames Jun 30 11:53:06.077709 (XEN) common/grant_table.c:1909:d3v0 Expanding d3 grant table from 2 to 3 frames Jun 30 11:53:06.089722 [ 1679.336647] vif vif-3-0 vif3.0: Guest Rx ready Jun 30 11:53:06.137719 [ 1679.340019] xenbr0: port 2(vif3.0) entered blocking state Jun 30 11:53:06.149746 [ 1679.345437] xenbr0: port 2(vif3.0) entered forwarding state Jun 30 11:53:06.149809 [ 1712.308179] xenbr0: port 2(vif3.0) entered disabled state Jun 30 11:53:39.113773 [ 1712.512412] xenbr0: port 2(vif3.0) entered disabled state Jun 30 11:53:39.317766 [ 1712.516945] vif vif-3-0 vif3.0 (unregistering): left allmulticast mode Jun 30 11:53:39.329677 [ 1712.523079] vif vif-3-0 vif3.0 (unregistering): left promiscuous mode Jun 30 11:53:39.329677 [ 1712.529560] xenbr0: port 2(vif3.0) entered disabled state Jun 30 11:53:39.341685 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 11:54:01.953747 [ 1738.167509] EXT4-fs (dm-2): unmounting filesystem 95168dbd-bc04-4f4d-8bd8-d096ac78ab9a. Jun 30 11:54:04.973841 [ 1739.496894] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 11:54:06.305772 [ 1739.637743] EXT4-fs (dm-2): mounted filesystem 95168dbd-bc04-4f4d-8bd8-d096ac78ab9a r/w with ordered data mode. Quota mode: disabled. Jun 30 11:54:06.449723 [ 1740.140456] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Jun 30 11:54:06.953746 [ 1740.199043] xvda: xvda1 xvda2 xvda3 < xvda5 > Jun 30 11:54:07.001752 [ 1747.812865] xenbr0: port 2(vif4.0) entered blocking state Jun 30 11:54:14.621825 [ 1747.816927] xenbr0: port 2(vif4.0) entered disabled state Jun 30 11:54:14.621908 [ 1747.822434] vif vif-4-0 vif4.0: entered allmulticast mode Jun 30 11:54:14.621957 [ 1747.828022] vif vif-4-0 vif4.0: entered promiscuous mode Jun 30 11:54:14.633718 (XEN) d4v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 11:54:18.833710 (XEN) d4v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 11:54:18.941745 (XEN) d4v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 11:54:18.977758 (XEN) common/grant_table.c:1909:d4v0 Expanding d4 grant table from 1 to 2 frames Jun 30 11:54:22.065775 (XEN) common/grant_table.c:1909:d4v0 Expanding d4 grant table from 2 to 3 frames Jun 30 11:54:22.077712 [ 1755.341277] vif vif-4-0 vif4.0: Guest Rx ready Jun 30 11:54:22.137721 [ 1755.345389] xenbr0: port 2(vif4.0) entered blocking state Jun 30 11:54:22.149762 [ 1755.350051] xenbr0: port 2(vif4.0) entered forwarding state Jun 30 11:54:22.149823 [ 1788.444541] xenbr0: port 2(vif4.0) entered disabled state Jun 30 11:54:55.249786 [ 1788.653970] xenbr0: port 2(vif4.0) entered disabled state Jun 30 11:54:55.453752 [ 1788.666459] vif vif-4-0 vif4.0 (unregistering): left allmulticast mode Jun 30 11:54:55.477749 [ 1788.671634] vif vif-4-0 vif4.0 (unregistering): left promiscuous mode Jun 30 11:54:55.477814 [ 1788.678210] xenbr0: port 2(vif4.0) entered disabled state Jun 30 11:54:55.489704 [ 1814.389484] EXT4-fs (dm-2): unmounting filesystem 95168dbd-bc04-4f4d-8bd8-d096ac78ab9a. Jun 30 11:55:21.201610 [ 1815.699986] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 11:55:22.509734 [ 1815.841530] EXT4-fs (dm-2): mounted filesystem 95168dbd-bc04-4f4d-8bd8-d096ac78ab9a r/w with ordered data mode. Quota mode: disabled. Jun 30 11:55:22.653687 [ 1816.343784] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Jun 30 11:55:23.157748 [ 1816.360087] xvda: xvda1 xvda2 xvda3 < xvda5 > Jun 30 11:55:23.169676 [ 1823.986059] xenbr0: port 2(vif5.0) entered blocking state Jun 30 11:55:30.789826 [ 1823.990092] xenbr0: port 2(vif5.0) entered disabled state Jun 30 11:55:30.801728 [ 1823.995628] vif vif-5-0 vif5.0: entered allmulticast mode Jun 30 11:55:30.801788 [ 1824.001213] vif vif-5-0 vif5.0: entered promiscuous mode Jun 30 11:55:30.801837 (XEN) d5v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 11:55:35.001741 (XEN) d5v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 11:55:35.121688 (XEN) d5v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 11:55:35.161707 (XEN) common/grant_table.c:1909:d5v0 Expanding d5 grant table from 1 to 2 frames Jun 30 11:55:38.161782 (XEN) common/grant_table.c:1909:d5v0 Expanding d5 grant table from 2 to 3 frames Jun 30 11:55:38.173686 [ 1831.442319] vif vif-5-0 vif5.0: Guest Rx ready Jun 30 11:55:38.245755 [ 1831.447214] xenbr0: port 2(vif5.0) entered blocking state Jun 30 11:55:38.245818 [ 1831.451601] xenbr0: port 2(vif5.0) entered forwarding state Jun 30 11:55:38.257715 [ 1864.759589] xenbr0: port 2(vif5.0) entered disabled state Jun 30 11:56:11.568586 [ 1864.963031] xenbr0: port 2(vif5.0) entered disabled state Jun 30 11:56:11.772589 [ 1864.968207] vif vif-5-0 vif5.0 (unregistering): left allmulticast mode Jun 30 11:56:11.772589 [ 1864.973735] vif vif-5-0 vif5.0 (unregistering): left promiscuous mode Jun 30 11:56:11.784538 [ 1864.980179] xenbr0: port 2(vif5.0) entered disabled state Jun 30 11:56:11.784538 [ 1890.677017] EXT4-fs (dm-2): unmounting filesystem 95168dbd-bc04-4f4d-8bd8-d096ac78ab9a. Jun 30 11:56:37.489710 [ 1891.992963] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 11:56:38.797748 [ 1892.134302] EXT4-fs (dm-2): mounted filesystem 95168dbd-bc04-4f4d-8bd8-d096ac78ab9a r/w with ordered data mode. Quota mode: disabled. Jun 30 11:56:38.941759 [ 1892.980736] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Jun 30 11:56:39.793595 [ 1893.005020] xvda: xvda1 xvda2 xvda3 < xvda5 > Jun 30 11:56:39.805704 [ 1900.523329] xenbr0: port 2(vif6.0) entered blocking state Jun 30 11:56:47.324711 [ 1900.527364] xenbr0: port 2(vif6.0) entered disabled state Jun 30 11:56:47.336652 [ 1900.532892] vif vif-6-0 vif6.0: entered allmulticast mode Jun 30 11:56:47.336774 [ 1900.538486] vif vif-6-0 vif6.0: entered promiscuous mode Jun 30 11:56:47.348618 (XEN) d6v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 11:56:51.548462 (XEN) d6v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 11:56:51.656477 (XEN) d6v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 11:56:51.692473 (XEN) common/grant_table.c:1909:d6v1 Expanding d6 grant table from 1 to 2 frames Jun 30 11:56:54.800487 (XEN) common/grant_table.c:1909:d6v1 Expanding d6 grant table from 2 to 3 frames Jun 30 11:56:54.824456 [ 1908.064078] vif vif-6-0 vif6.0: Guest Rx ready Jun 30 11:56:54.872483 [ 1908.068100] xenbr0: port 2(vif6.0) entered blocking state Jun 30 11:56:54.872483 [ 1908.075361] xenbr0: port 2(vif6.0) entered forwarding state Jun 30 11:56:54.884456 [ 1943.495028] xenbr0: port 2(vif6.0) entered disabled state Jun 30 11:57:30.297734 [ 1943.772442] xenbr0: port 2(vif6.0) entered disabled state Jun 30 11:57:30.573741 [ 1943.776959] vif vif-6-0 vif6.0 (unregistering): left allmulticast mode Jun 30 11:57:30.585738 [ 1943.783114] vif vif-6-0 vif6.0 (unregistering): left promiscuous mode Jun 30 11:57:30.585802 [ 1943.789593] xenbr0: port 2(vif6.0) entered disabled state Jun 30 11:57:30.597708 [ 1969.465635] EXT4-fs (dm-2): unmounting filesystem 95168dbd-bc04-4f4d-8bd8-d096ac78ab9a. Jun 30 11:57:56.273784 [ 1970.785664] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 11:57:57.593705 [ 1970.927160] EXT4-fs (dm-2): mounted filesystem 95168dbd-bc04-4f4d-8bd8-d096ac78ab9a r/w with ordered data mode. Quota mode: disabled. Jun 30 11:57:57.737703 [ 1971.417185] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Jun 30 11:57:58.229717 [ 1971.434330] xvda: xvda1 xvda2 xvda3 < xvda5 > Jun 30 11:57:58.241685 [ 1979.036704] xenbr0: port 2(vif7.0) entered blocking state Jun 30 11:58:05.841803 [ 1979.040797] xenbr0: port 2(vif7.0) entered disabled state Jun 30 11:58:05.841880 [ 1979.046251] vif vif-7-0 vif7.0: entered allmulticast mode Jun 30 11:58:05.853727 [ 1979.051853] vif vif-7-0 vif7.0: entered promiscuous mode Jun 30 11:58:05.853790 (XEN) d7v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 11:58:10.053733 (XEN) d7v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 11:58:10.161757 (XEN) d7v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 11:58:10.197736 (XEN) common/grant_table.c:1909:d7v0 Expanding d7 grant table from 1 to 2 frames Jun 30 11:58:13.221812 (XEN) common/grant_table.c:1909:d7v0 Expanding d7 grant table from 2 to 3 frames Jun 30 11:58:13.233689 [ 1986.495559] vif vif-7-0 vif7.0: Guest Rx ready Jun 30 11:58:13.293758 [ 1986.499498] xenbr0: port 2(vif7.0) entered blocking state Jun 30 11:58:13.305726 [ 1986.504155] xenbr0: port 2(vif7.0) entered forwarding state Jun 30 11:58:13.305789 [ 2019.821955] xenbr0: port 2(vif7.0) entered disabled state Jun 30 11:58:46.629683 [ 2020.062545] xenbr0: port 2(vif7.0) entered disabled state Jun 30 11:58:46.869786 [ 2020.066893] vif vif-7-0 vif7.0 (unregistering): left allmulticast mode Jun 30 11:58:46.869863 [ 2020.073202] vif vif-7-0 vif7.0 (unregistering): left promiscuous mode Jun 30 11:58:46.881675 [ 2020.079699] xenbr0: port 2(vif7.0) entered disabled state Jun 30 11:58:46.881794 [ 2045.699102] EXT4-fs (dm-2): unmounting filesystem 95168dbd-bc04-4f4d-8bd8-d096ac78ab9a. Jun 30 11:59:12.505770 [ 2047.011645] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 11:59:13.813748 [ 2047.153154] EXT4-fs (dm-2): mounted filesystem 95168dbd-bc04-4f4d-8bd8-d096ac78ab9a r/w with ordered data mode. Quota mode: disabled. Jun 30 11:59:13.957772 [ 2047.652714] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Jun 30 11:59:14.461756 [ 2047.670730] xvda: xvda1 xvda2 xvda3 < xvda5 > Jun 30 11:59:14.473704 [ 2055.354172] xenbr0: port 2(vif8.0) entered blocking state Jun 30 11:59:22.161771 [ 2055.358208] xenbr0: port 2(vif8.0) entered disabled state Jun 30 11:59:22.161889 [ 2055.363747] vif vif-8-0 vif8.0: entered allmulticast mode Jun 30 11:59:22.173744 [ 2055.369345] vif vif-8-0 vif8.0: entered promiscuous mode Jun 30 11:59:22.173806 (XEN) d8v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 11:59:26.373702 (XEN) d8v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 11:59:26.493690 (XEN) d8v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 11:59:26.529720 (XEN) common/grant_table.c:1909:d8v0 Expanding d8 grant table from 1 to 2 frames Jun 30 11:59:29.593695 (XEN) common/grant_table.c:1909:d8v0 Expanding d8 grant table from 2 to 3 frames Jun 30 11:59:29.593710 [ 2062.840129] vif vif-8-0 vif8.0: Guest Rx ready Jun 30 11:59:29.641689 [ 2062.844316] xenbr0: port 2(vif8.0) entered blocking state Jun 30 11:59:29.641702 [ 2062.848708] xenbr0: port 2(vif8.0) entered forwarding state Jun 30 11:59:29.653658 [ 2095.826379] xenbr0: port 2(vif8.0) entered disabled state Jun 30 12:00:02.633695 [ 2096.152495] xenbr0: port 2(vif8.0) entered disabled state Jun 30 12:00:02.957751 [ 2096.156843] vif vif-8-0 vif8.0 (unregistering): left allmulticast mode Jun 30 12:00:02.957817 [ 2096.163223] vif vif-8-0 vif8.0 (unregistering): left promiscuous mode Jun 30 12:00:02.969736 [ 2096.169652] xenbr0: port 2(vif8.0) entered disabled state Jun 30 12:00:02.969798 [ 2121.847154] EXT4-fs (dm-2): unmounting filesystem 95168dbd-bc04-4f4d-8bd8-d096ac78ab9a. Jun 30 12:00:28.653779 [ 2123.060083] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 12:00:29.865775 [ 2123.212612] EXT4-fs (dm-2): mounted filesystem 95168dbd-bc04-4f4d-8bd8-d096ac78ab9a r/w with ordered data mode. Quota mode: disabled. Jun 30 12:00:30.021753 [ 2124.125164] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Jun 30 12:00:30.933752 [ 2124.146411] xvda: xvda1 xvda2 xvda3 < xvda5 > Jun 30 12:00:30.945716 [ 2131.591383] xenbr0: port 2(vif9.0) entered blocking state Jun 30 12:00:38.397811 [ 2131.595472] xenbr0: port 2(vif9.0) entered disabled state Jun 30 12:00:38.397894 [ 2131.600905] vif vif-9-0 vif9.0: entered allmulticast mode Jun 30 12:00:38.409723 [ 2131.606573] vif vif-9-0 vif9.0: entered promiscuous mode Jun 30 12:00:38.409785 (XEN) d9v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 12:00:42.601651 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 12:00:42.661636 (XEN) d9v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 12:00:42.721612 (XEN) d9v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 12:00:42.757613 (XEN) common/grant_table.c:1909:d9v1 Expanding d9 grant table from 1 to 2 frames Jun 30 12:00:45.841663 (XEN) common/grant_table.c:1909:d9v0 Expanding d9 grant table from 2 to 3 frames Jun 30 12:00:45.841709 [ 2139.119264] vif vif-9-0 vif9.0: Guest Rx ready Jun 30 12:00:45.913648 [ 2139.122641] xenbr0: port 2(vif9.0) entered blocking state Jun 30 12:00:45.925673 [ 2139.129160] xenbr0: port 2(vif9.0) entered forwarding state Jun 30 12:00:45.925708 [ 2172.385901] xenbr0: port 2(vif9.0) entered disabled state Jun 30 12:01:19.181797 [ 2172.622673] xenbr0: port 2(vif9.0) entered disabled state Jun 30 12:01:19.421782 [ 2172.627190] vif vif-9-0 vif9.0 (unregistering): left allmulticast mode Jun 30 12:01:19.433768 [ 2172.633352] vif vif-9-0 vif9.0 (unregistering): left promiscuous mode Jun 30 12:01:19.433833 [ 2172.639830] xenbr0: port 2(vif9.0) entered disabled state Jun 30 12:01:19.445688 [ 2198.316366] EXT4-fs (dm-2): unmounting filesystem 95168dbd-bc04-4f4d-8bd8-d096ac78ab9a. Jun 30 12:01:45.124610 [ 2199.641562] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 12:01:46.445733 [ 2199.783032] EXT4-fs (dm-2): mounted filesystem 95168dbd-bc04-4f4d-8bd8-d096ac78ab9a r/w with ordered data mode. Quota mode: disabled. Jun 30 12:01:46.589735 [ 2200.275784] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Jun 30 12:01:47.081808 [ 2200.292841] xvda: xvda1 xvda2 xvda3 < xvda5 > Jun 30 12:01:47.093762 [ 2207.875974] xenbr0: port 2(vif10.0) entered blocking state Jun 30 12:01:54.677801 [ 2207.880095] xenbr0: port 2(vif10.0) entered disabled state Jun 30 12:01:54.677885 [ 2207.885697] vif vif-10-0 vif10.0: entered allmulticast mode Jun 30 12:01:54.689752 [ 2207.891457] vif vif-10-0 vif10.0: entered promiscuous mode Jun 30 12:01:54.689814 (XEN) d10v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 12:01:58.896465 (XEN) d10v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 12:01:59.016549 (XEN) d10v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 12:01:59.052539 (XEN) common/grant_table.c:1909:d10v0 Expanding d10 grant table from 1 to 2 frames Jun 30 12:02:02.120527 (XEN) common/grant_table.c:1909:d10v0 Expanding d10 grant table from 2 to 3 frames Jun 30 12:02:02.120527 [ 2215.361643] vif vif-10-0 vif10.0: Guest Rx ready Jun 30 12:02:02.156453 [ 2215.365631] xenbr0: port 2(vif10.0) entered blocking state Jun 30 12:02:02.168512 [ 2215.370651] xenbr0: port 2(vif10.0) entered forwarding state Jun 30 12:02:02.168512 [ 2248.445128] xenbr0: port 2(vif10.0) entered disabled state Jun 30 12:02:35.249773 [ 2248.692497] xenbr0: port 2(vif10.0) entered disabled state Jun 30 12:02:35.489818 [ 2248.697074] vif vif-10-0 vif10.0 (unregistering): left allmulticast mode Jun 30 12:02:35.501745 [ 2248.703432] vif vif-10-0 vif10.0 (unregistering): left promiscuous mode Jun 30 12:02:35.501809 [ 2248.710106] xenbr0: port 2(vif10.0) entered disabled state Jun 30 12:02:35.513725 [ 2274.390488] EXT4-fs (dm-2): unmounting filesystem 95168dbd-bc04-4f4d-8bd8-d096ac78ab9a. Jun 30 12:03:01.193740 [ 2275.645446] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 12:03:02.441775 [ 2275.786918] EXT4-fs (dm-2): mounted filesystem 95168dbd-bc04-4f4d-8bd8-d096ac78ab9a r/w with ordered data mode. Quota mode: disabled. Jun 30 12:03:02.585784 [ 2276.630334] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Jun 30 12:03:03.429837 [ 2276.656635] xvda: xvda1 xvda2 xvda3 < xvda5 > Jun 30 12:03:03.457649 [ 2284.199386] xenbr0: port 2(vif11.0) entered blocking state Jun 30 12:03:10.993776 [ 2284.203538] xenbr0: port 2(vif11.0) entered disabled state Jun 30 12:03:11.005751 [ 2284.209080] vif vif-11-0 vif11.0: entered allmulticast mode Jun 30 12:03:11.005814 [ 2284.214888] vif vif-11-0 vif11.0: entered promiscuous mode Jun 30 12:03:11.017707 (XEN) d11v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 12:03:15.217752 (XEN) d11v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 12:03:15.337694 (XEN) d11v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 12:03:15.373727 (XEN) common/grant_table.c:1909:d11v0 Expanding d11 grant table from 1 to 2 frames Jun 30 12:03:18.421759 (XEN) common/grant_table.c:1909:d11v0 Expanding d11 grant table from 2 to 3 frames Jun 30 12:03:18.421829 [ 2291.693904] vif vif-11-0 vif11.0: Guest Rx ready Jun 30 12:03:18.493765 [ 2291.698234] xenbr0: port 2(vif11.0) entered blocking state Jun 30 12:03:18.493828 [ 2291.704458] xenbr0: port 2(vif11.0) entered forwarding state Jun 30 12:03:18.505715 [ 2325.103949] xenbr0: port 2(vif11.0) entered disabled state Jun 30 12:03:51.905801 [ 2325.322437] xenbr0: port 2(vif11.0) entered disabled state Jun 30 12:03:52.121832 [ 2325.327249] vif vif-11-0 vif11.0 (unregistering): left allmulticast mode Jun 30 12:03:52.121897 [ 2325.333401] vif vif-11-0 vif11.0 (unregistering): left promiscuous mode Jun 30 12:03:52.133807 [ 2325.340034] xenbr0: port 2(vif11.0) entered disabled state Jun 30 12:03:52.133870 [ 2351.038843] EXT4-fs (dm-2): unmounting filesystem 95168dbd-bc04-4f4d-8bd8-d096ac78ab9a. Jun 30 12:04:17.841798 [ 2352.349314] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 12:04:19.149789 [ 2352.490750] EXT4-fs (dm-2): mounted filesystem 95168dbd-bc04-4f4d-8bd8-d096ac78ab9a r/w with ordered data mode. Quota mode: disabled. Jun 30 12:04:19.293740 [ 2352.994374] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Jun 30 12:04:19.797849 [ 2353.011886] xvda: xvda1 xvda2 xvda3 < xvda5 > Jun 30 12:04:19.809709 [ 2360.593489] xenbr0: port 2(vif12.0) entered blocking state Jun 30 12:04:27.393717 [ 2360.597612] xenbr0: port 2(vif12.0) entered disabled state Jun 30 12:04:27.393717 [ 2360.603218] vif vif-12-0 vif12.0: entered allmulticast mode Jun 30 12:04:27.405654 [ 2360.608970] vif vif-12-0 vif12.0: entered promiscuous mode Jun 30 12:04:27.405654 (XEN) d12v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 12:04:31.601609 (XEN) d12v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 12:04:31.721613 (XEN) d12v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 12:04:31.757820 (XEN) common/grant_table.c:1909:d12v0 Expanding d12 grant table from 1 to 2 frames Jun 30 12:04:34.869810 (XEN) common/grant_table.c:1909:d12v0 Expanding d12 grant table from 2 to 3 frames Jun 30 12:04:34.869897 [ 2368.127131] vif vif-12-0 vif12.0: Guest Rx ready Jun 30 12:04:34.929743 [ 2368.130971] xenbr0: port 2(vif12.0) entered blocking state Jun 30 12:04:34.929805 [ 2368.142662] xenbr0: port 2(vif12.0) entered forwarding state Jun 30 12:04:34.941721 [ 2401.163677] xenbr0: port 2(vif12.0) entered disabled state Jun 30 12:05:07.968511 [ 2401.402566] xenbr0: port 2(vif12.0) entered disabled state Jun 30 12:05:08.196475 [ 2401.407165] vif vif-12-0 vif12.0 (unregistering): left allmulticast mode Jun 30 12:05:08.208527 [ 2401.413513] vif vif-12-0 vif12.0 (unregistering): left promiscuous mode Jun 30 12:05:08.220480 [ 2401.420188] xenbr0: port 2(vif12.0) entered disabled state Jun 30 12:05:08.220480 [ 2427.578215] EXT4-fs (dm-2): unmounting filesystem 95168dbd-bc04-4f4d-8bd8-d096ac78ab9a. Jun 30 12:05:34.381619 [ 2428.897543] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 12:05:35.701647 [ 2429.039066] EXT4-fs (dm-2): mounted filesystem 95168dbd-bc04-4f4d-8bd8-d096ac78ab9a r/w with ordered data mode. Quota mode: disabled. Jun 30 12:05:35.845726 [ 2429.537940] blkfront: xvda: flush diskcache: enabled; persistent grants: disabled; indirect descriptors: disabled; bounce buffer: disabled; Jun 30 12:05:36.349736 [ 2429.555302] xvda: xvda1 xvda2 xvda3 < xvda5 > Jun 30 12:05:36.349796 [ 2437.198344] xenbr0: port 2(vif13.0) entered blocking state Jun 30 12:05:44.001656 [ 2437.202534] xenbr0: port 2(vif13.0) entered disabled state Jun 30 12:05:44.001656 [ 2437.208049] vif vif-13-0 vif13.0: entered allmulticast mode Jun 30 12:05:44.013628 [ 2437.213899] vif vif-13-0 vif13.0: entered promiscuous mode Jun 30 12:05:44.013628 (XEN) d13v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 12:05:48.217604 (XEN) d13v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 12:05:48.325780 (XEN) d13v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 12:05:48.361617 (XEN) common/grant_table.c:1909:d13v0 Expanding d13 grant table from 1 to 2 frames Jun 30 12:05:51.385669 (XEN) common/grant_table.c:1909:d13v0 Expanding d13 grant table from 2 to 3 frames Jun 30 12:05:51.397730 [ 2444.680510] vif vif-13-0 vif13.0: Guest Rx ready Jun 30 12:05:51.481667 [ 2444.684034] xenbr0: port 2(vif13.0) entered blocking state Jun 30 12:05:51.481667 [ 2444.691412] xenbr0: port 2(vif13.0) entered forwarding state Jun 30 12:05:51.493620 [ 2475.933353] xenbr0: port 2(vif13.0) entered disabled state Jun 30 12:06:22.725747 [ 2476.072500] xenbr0: port 2(vif13.0) entered disabled state Jun 30 12:06:22.869764 [ 2476.078300] vif vif-13-0 vif13.0 (unregistering): left allmulticast mode Jun 30 12:06:22.881763 [ 2476.083910] vif vif-13-0 vif13.0 (unregistering): left promiscuous mode Jun 30 12:06:22.881829 [ 2476.090355] xenbr0: port 2(vif13.0) entered disabled state Jun 30 12:06:22.893695 [ 2479.052586] EXT4-fs (dm-2): unmounting filesystem 95168dbd-bc04-4f4d-8bd8-d096ac78ab9a. Jun 30 12:06:25.845762 Jun 30 12:06:47.562956 (XEN) *** Serial input to Xen (type 'CTRL-x' three times to switch input) Jun 30 12:06:47.585761 Jun 30 12:06:47.586511 Jun 30 12:06:48.566813 (XEN) '0' pressed -> dumping Dom0's registers Jun 30 12:06:48.581756 (XEN) *** Dumping Dom0 vcpu#0 state: *** Jun 30 12:06:48.581756 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Jun 30 12:06:48.583163 Not tainted ]---- Jun 30 12:06:48.593814 (XEN) CPU: 0 Jun 30 12:06:48.593843 (XEN) PC: c031be28 Jun 30 12:06:48.593866 (XEN) CPSR: 600f0093 MODE:32-bit Guest SVC Jun 30 12:06:48.593890 (XEN) R0: 00000005 R1: 00000000 R2: 003dc0a9 R3: c031be20 Jun 30 12:06:48.605757 (XEN) R4: c1b09d40 R5: c1d26f50 R6: c1b04e5c R7: c1b04e98 Jun 30 12:06:48.605791 (XEN) R8: 00000000 R9: 00000000 R10:000000ad R11:00000000 R12:c1d264a0 Jun 30 12:06:48.617692 (XEN) USR: SP: beb3e8e4 LR: b6982169 Jun 30 12:06:48.617723 (XEN) SVC: SP: c1b01f78 LR: c114e078 SPSR:600f0013 Jun 30 12:06:48.617748 (XEN) ABT: SP: c1d38b10 LR: c0300ec0 SPSR:600f0193 Jun 30 12:06:48.629700 (XEN) UND: SP: c1d38b20 LR: c0300fc0 SPSR:600f0093 Jun 30 12:06:48.629732 (XEN) IRQ: SP: c1d38b00 LR: c0300bc0 SPSR:600f0193 Jun 30 12:06:48.641702 (XEN) FIQ: SP: c1d38b30 LR: c1d38b30 SPSR:00000000 Jun 30 12:06:48.641773 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Jun 30 12:06:48.641822 (XEN) Jun 30 12:06:48.653685 (XEN) SCTLR: 10c5387d Jun 30 12:06:48.653737 (XEN) TCR: 00000000 Jun 30 12:06:48.653779 (XEN) TTBR0: 0000000064d9406a Jun 30 12:06:48.653821 (XEN) TTBR1: 000000006020406a Jun 30 12:06:48.653863 (XEN) IFAR: b6e02eb8, IFSR: 00000007 Jun 30 12:06:48.665694 (XEN) DFAR: 00589318, DFSR: 0000081f Jun 30 12:06:48.665755 (XEN) Jun 30 12:06:48.665795 (XEN) VTCR_EL2: 80003558 Jun 30 12:06:48.665836 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 12:06:48.677691 (XEN) Jun 30 12:06:48.677735 (XEN) SCTLR_EL2: 30cd187f Jun 30 12:06:48.677779 (XEN) HCR_EL2: 007c663f Jun 30 12:06:48.677820 (XEN) TTBR0_EL2: 0000000041107000 Jun 30 12:06:48.677862 (XEN) Jun 30 12:06:48.677900 (XEN) ESR_EL2: 07e00000 Jun 30 12:06:48.689688 (XEN) HPFAR_EL2: 00104810 Jun 30 12:06:48.689743 (XEN) HDFAR: e0807f00 Jun 30 12:06:48.689786 (XEN) HIFAR: c141f6d0 Jun 30 12:06:48.689827 (XEN) Jun 30 12:06:48.689865 (XEN) Guest stack trace from sp=c1b01f78: Jun 30 12:06:48.701695 (XEN) Failed to convert stack to physical address Jun 30 12:06:48.701755 (XEN) *** Dumping Dom0 vcpu#1 state: *** Jun 30 12:06:48.701800 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Not tainted ]---- Jun 30 12:06:48.713691 (XEN) CPU: 0 Jun 30 12:06:48.713741 (XEN) PC: c031be28 Jun 30 12:06:48.713782 (XEN) CPSR: 600d0093 MODE:32-bit Guest SVC Jun 30 12:06:48.713827 (XEN) R0: 00000005 R1: 00000000 R2: 002e33f1 R3: c031be20 Jun 30 12:06:48.725698 (XEN) R4: c2110880 R5: c1d26f50 R6: c1b04e5c R7: c1b04e98 Jun 30 12:06:48.725755 (XEN) R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:c1d264a0 Jun 30 12:06:48.737720 (XEN) USR: SP: bed09938 LR: b6b5f853 Jun 30 12:06:48.737752 (XEN) SVC: SP: e08d9fa0 LR: c114e078 SPSR:000d0030 Jun 30 12:06:48.737778 (XEN) ABT: SP: c1d38b50 LR: c0301040 SPSR:600b0193 Jun 30 12:06:48.749807 (XEN) UND: SP: c1d38b60 LR: c0300fc0 SPSR:600d0093 Jun 30 12:06:48.749840 (XEN) IRQ: SP: c1d38b40 LR: c0300bc0 SPSR:60070193 Jun 30 12:06:48.761713 (XEN) FIQ: SP: c1d38b70 LR: c1d38b70 SPSR:00000000 Jun 30 12:06:48.761746 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Jun 30 12:06:48.773682 (XEN) Jun 30 12:06:48.773711 (XEN) SCTLR: 10c5387d Jun 30 12:06:48.773734 (XEN) TCR: 00000000 Jun 30 12:06:48.773756 (XEN) TTBR0: 000000006433c06a Jun 30 12:06:48.773779 (XEN) TTBR1: 000000006020406a Jun 30 12:06:48.785784 (XEN) IFAR: b6de0eb8, IFSR: 00000007 Jun 30 12:06:48.785784 (XEN) DFAR: b6acff18, DFSR: 00000017 Jun 30 12:06:48.785784 (XEN) Jun 30 12:06:48.785803 (XEN) VTCR_EL2: 80003558 Jun 30 12:06:48.785825 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 12:06:48.797789 (XEN) Jun 30 12:06:48.797818 (XEN) SCTLR_EL2: 30cd187f Jun 30 12:06:48.797841 (XEN) HCR_EL2: 007c663f Jun 30 12:06:48.797864 (XEN) TTBR0_EL2: 0000000041107000 Jun 30 12:06:48.797887 (XEN) Jun 30 12:06:48.797932 (XEN) ESR_EL2: 07e00000 Jun 30 12:06:48.809689 (XEN) HPFAR_EL2: 00104810 Jun 30 12:06:48.809741 (XEN) HDFAR: e0807f00 Jun 30 12:06:48.809783 (XEN) HIFAR: c141f6d0 Jun 30 12:06:48.809823 (XEN) Jun 30 12:06:48.809861 (XEN) Guest stack trace from sp=e08d9fa0: Jun 30 12:06:48.821671 (XEN) Failed to convert stack to physical address Jun 30 12:06:48.821731 Jun 30 12:06:50.563025 (XEN) 'H' pressed -> dumping heap info (now = 2509157018500) Jun 30 12:06:50.581720 (XEN) heap[node=0][zone=0] -> 16280 pages Jun 30 12:06:50.581752 (XEN) heap[node=0][zone=1] -> 0 Jun 30 12:06:50.583010 pages Jun 30 12:06:50.593655 (XEN) heap[node=0][zone=2] -> 0 pages Jun 30 12:06:50.593686 (XEN) heap[node=0][zone=3] -> 0 pages Jun 30 12:06:50.593710 (XEN) heap[node=0][zone=4] -> 0 pages Jun 30 12:06:50.593734 (XEN) heap[node=0][zone=5] -> 0 pages Jun 30 12:06:50.605684 (XEN) heap[node=0][zone=6] -> 0 pages Jun 30 12:06:50.605715 (XEN) heap[node=0][zone=7] -> 0 pages Jun 30 12:06:50.605739 (XEN) heap[node=0][zone=8] -> 0 pages Jun 30 12:06:50.617687 (XEN) heap[node=0][zone=9] -> 0 pages Jun 30 12:06:50.617719 (XEN) heap[node=0][zone=10] -> 0 pages Jun 30 12:06:50.617743 (XEN) heap[node=0][zone=11] -> 0 pages Jun 30 12:06:50.617766 (XEN) heap[node=0][zone=12] -> 0 pages Jun 30 12:06:50.629696 (XEN) heap[node=0][zone=13] -> 0 pages Jun 30 12:06:50.629727 (XEN) heap[node=0][zone=14] -> 0 pages Jun 30 12:06:50.629751 (XEN) heap[node=0][zone=15] -> 0 pages Jun 30 12:06:50.641704 (XEN) heap[node=0][zone=16] -> 0 pages Jun 30 12:06:50.641736 (XEN) heap[node=0][zone=17] -> 0 pages Jun 30 12:06:50.641760 (XEN) heap[node=0][zone=18] -> 0 pages Jun 30 12:06:50.641783 (XEN) heap[node=0][zone=19] -> 130833 pages Jun 30 12:06:50.653692 (XEN) heap[node=0][zone=20] -> 241596 pages Jun 30 12:06:50.653723 (XEN) heap[node=0][zone=21] -> 0 pages Jun 30 12:06:50.653779 (XEN) heap[node=0][zone=22] -> 0 pages Jun 30 12:06:50.665694 (XEN) heap[node=0][zone=23] -> 0 pages Jun 30 12:06:50.665694 (XEN) heap[node=0][zone=24] -> 0 pages Jun 30 12:06:50.665694 (XEN) heap[node=0][zone=25] -> 0 pages Jun 30 12:06:50.677687 (XEN) heap[node=0][zone=26] -> 0 pages Jun 30 12:06:50.677741 (XEN) heap[node=0][zone=27] -> 0 pages Jun 30 12:06:50.677785 (XEN) heap[node=0][zone=28] -> 0 pages Jun 30 12:06:50.677829 Jun 30 12:06:52.565918 Jun 30 12:06:54.367518 Jun 30 12:06:54.570876 Jun 30 12:06:56.372876 Jun 30 12:06:56.578904 (XEN) Dumping timer queues: Jun 30 12:06:56.593677 (XEN) CPU00: Jun 30 12:06:56.593705 (XEN) ex= 20537us timer=43fef968 cb=vtimer.c#virt_timer_expired(43fef960) Jun 30 12:06:56.593735 (XEN) CPU Jun 30 12:06:56.594975 01: Jun 30 12:06:56.605620 (XEN) ex= 126876us timer=43fdc968 cb=vtimer.c#virt_timer_expired(43fdc960) Jun 30 12:06:56.605656 Jun 30 12:06:58.589666 Jun 30 12:07:00.380707 Jun 30 12:07:00.583951 (XEN) 'd' pressed -> dumping registers Jun 30 12:07:00.601718 (XEN) Jun 30 12:07:00.601747 (XEN) *** Dumping CPU0 host state: *** Jun 30 12:07:00.601772 (XEN) ----[ Xen-4.19-unstable arm32 debug=y N Jun 30 12:07:00.603017 ot tainted ]---- Jun 30 12:07:00.613674 (XEN) CPU: 0 Jun 30 12:07:00.613702 (XEN) PC: 0025ef7c domain.c#idle_loop+0x130/0x1ac Jun 30 12:07:00.613728 (XEN) CPSR: 6001005a MODE:Hypervisor Jun 30 12:07:00.613753 (XEN) R0: 00000000 R1: 0029f300 R2: 00000000 R3: 00000000 Jun 30 12:07:00.625750 (XEN) R4: 00000000 R5: 002f80e0 R6: 0032b324 R7: 00000001 Jun 30 12:07:00.625783 (XEN) R8: 0032b104 R9: 00000000 R10:40e00000 R11:4003ff54 R12:fffffffc Jun 30 12:07:00.637684 (XEN) HYP: SP: 4003ff44 LR: 00225cb8 Jun 30 12:07:00.637715 (XEN) Jun 30 12:07:00.637737 (XEN) VTCR_EL2: 80003558 Jun 30 12:07:00.637759 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 12:07:00.649688 (XEN) Jun 30 12:07:00.649716 (XEN) SCTLR_EL2: 30cd187f Jun 30 12:07:00.649740 (XEN) HCR_EL2: 007c663f Jun 30 12:07:00.649763 (XEN) TTBR0_EL2: 0000000041107000 Jun 30 12:07:00.649786 (XEN) Jun 30 12:07:00.649806 (XEN) ESR_EL2: 07e00000 Jun 30 12:07:00.661708 (XEN) HPFAR_EL2: 00104810 Jun 30 12:07:00.661738 (XEN) HDFAR: e0807f00 Jun 30 12:07:00.661762 (XEN) HIFAR: c141f6d0 Jun 30 12:07:00.661784 (XEN) Jun 30 12:07:00.661805 (XEN) Xen stack trace from sp=4003ff44: Jun 30 12:07:00.673699 (XEN) 07e00000 00295014 002919ac 4003ff4c 00267818 00000000 00000000 00000000 Jun 30 12:07:00.673734 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 12:07:00.685697 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 12:07:00.685731 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 12:07:00.697696 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 12:07:00.709736 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 12:07:00.709797 (XEN) Xen call trace: Jun 30 12:07:00.709839 (XEN) [<0025ef7c>] domain.c#idle_loop+0x130/0x1ac (PC) Jun 30 12:07:00.721693 (XEN) [<00225cb8>] rcu_needs_cpu+0x40/0x60 (LR) Jun 30 12:07:00.721726 (XEN) [<00267818>] arch_get_xen_caps+0/0x90 Jun 30 12:07:00.721751 (XEN) Jun 30 12:07:00.733695 (XEN) *** Dumping CPU1 host state: *** Jun 30 12:07:00.733727 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Not tainted ]---- Jun 30 12:07:00.733754 (XEN) CPU: 1 Jun 30 12:07:00.733776 (XEN) PC: 0025ef7c domain.c#idle_loop+0x130/0x1ac Jun 30 12:07:00.745693 (XEN) CPSR: 600d005a MODE:Hypervisor Jun 30 12:07:00.745725 (XEN) R0: 00000000 R1: 0029f300 R2: 3fd0e000 R3: 00000000 Jun 30 12:07:00.757686 (XEN) R4: 00000001 R5: 002f80e0 R6: 0032b324 R7: 00000002 Jun 30 12:07:00.757719 (XEN) R8: 0032b104 R9: 00000001 R10:40e00000 R11:4000ff54 R12:fffffffc Jun 30 12:07:00.769771 (XEN) HYP: SP: 4000ff44 LR: 00225cb8 Jun 30 12:07:00.769803 (XEN) Jun 30 12:07:00.769824 (XEN) VTCR_EL2: 80003558 Jun 30 12:07:00.769847 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 12:07:00.769869 (XEN) Jun 30 12:07:00.769890 (XEN) SCTLR_EL2: 30cd187f Jun 30 12:07:00.781702 (XEN) HCR_EL2: 007c663f Jun 30 12:07:00.781733 (XEN) TTBR0_EL2: 00000000ba004000 Jun 30 12:07:00.781756 (XEN) Jun 30 12:07:00.781777 (XEN) ESR_EL2: 07e00000 Jun 30 12:07:00.781799 (XEN) HPFAR_EL2: 00104810 Jun 30 12:07:00.793660 (XEN) HDFAR: e0807f00 Jun 30 12:07:00.793691 (XEN) HIFAR: c0c09f04 Jun 30 12:07:00.793715 (XEN) Jun 30 12:07:00.793735 (XEN) Xen stack trace from sp=4000ff44: Jun 30 12:07:00.793759 (XEN) 07e00000 002f9290 00000001 4000ff3c 002680f4 00000000 00000000 00000000 Jun 30 12:07:00.805668 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 12:07:00.817666 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 12:07:00.817699 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 12:07:00.829666 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 12:07:00.829700 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 12:07:00.841667 (XEN) Xen call trace: Jun 30 12:07:00.841708 (XEN) [<0025ef7c>] domain.c#idle_loop+0x130/0x1ac (PC) Jun 30 12:07:00.841737 (XEN) [<00225cb8>] rcu_needs_cpu+0x40/0x60 (LR) Jun 30 12:07:00.853643 (XEN) [<002680f4>] start_secondary+0x204/0x20c Jun 30 12:07:00.853676 (XEN) Jun 30 12:07:00.853697 Jun 30 12:07:02.587540 (XEN) 'e' pressed -> dumping event-channel info Jun 30 12:07:02.609755 (XEN) Event channel information for domain 0: Jun 30 12:07:02.609787 (XEN) Polling vCPUs: {} Jun 30 12:07:02.609810 (XEN) port Jun 30 12:07:02.611078 [p/m/s] Jun 30 12:07:02.621676 (XEN) 1 [0/0/ - ]: s=3 n=1 x=0 d=0 p=4 Jun 30 12:07:02.621707 (XEN) 2 [0/0/ - ]: s=5 n=0 x=0 v=2 Jun 30 12:07:02.621762 (XEN) 3 [0/0/ - ]: s=5 n=1 x=0 v=3 Jun 30 12:07:02.633702 (XEN) 4 [0/0/ - ]: s=3 n=0 x=0 d=0 p=1 Jun 30 12:07:02.633748 Jun 30 12:07:04.629679 (XEN) gnttab_usage_print_all [ key 'g' pressed Jun 30 12:07:04.648736 (XEN) -------- active -------- -------- shared -------- Jun 30 12:07:04.648736 (XEN) [ref] localdo Jun 30 12:07:04.650912 m mfn pin localdom gmfn flags Jun 30 12:07:04.660640 (XEN) grant-table for remote d0 (v1) Jun 30 12:07:04.660640 (XEN) 1 frames (64 max), 2 maptrack frames (1024 max) Jun 30 12:07:04.672710 (XEN) no active grant table entries Jun 30 12:07:04.672775 (XEN) gnttab_usage_print_all ] done Jun 30 12:07:04.672820 Jun 30 12:07:06.630626 Jun 30 12:07:08.392813 Jun 30 12:07:08.638518 (XEN) Physical memory information: Jun 30 12:07:08.656711 (XEN) Xen heap: 65120kB free Jun 30 12:07:08.656711 (XEN) heap[19]: 523332kB free Jun 30 12:07:08.656711 (XEN) heap[20]: 966384kB fr Jun 30 12:07:08.659035 ee Jun 30 12:07:08.668462 (XEN) Dom heap: 1489716kB free Jun 30 12:07:08.668462 Jun 30 12:07:10.642045 Jun 30 12:07:12.401617 Jun 30 12:07:12.645998 (XEN) sched_smt_power_savings: disabled Jun 30 12:07:12.661793 (XEN) NOW=2531237217416 Jun 30 12:07:12.661849 (XEN) Online Cpus: 0-1 Jun 30 12:07:12.661891 (XEN) Cpupool 0: Jun 30 12:07:12.661930 (XEN) Cpus: 0-1 Jun 30 12:07:12.661969 (XEN) Sched Jun 30 12:07:12.664192 uling granularity: cpu, 1 CPU per sched-resource Jun 30 12:07:12.673720 (XEN) Scheduler: SMP Credit Scheduler rev2 (credit2) Jun 30 12:07:12.673778 (XEN) Active queues: 1 Jun 30 12:07:12.673821 (XEN) default-weight = 256 Jun 30 12:07:12.685722 (XEN) Runqueue 0: Jun 30 12:07:12.685777 (XEN) ncpus = 2 Jun 30 12:07:12.685820 (XEN) cpus = 0-1 Jun 30 12:07:12.685861 (XEN) max_weight = 256 Jun 30 12:07:12.697755 (XEN) pick_bias = 0 Jun 30 12:07:12.697813 (XEN) instload = 0 Jun 30 12:07:12.697857 (XEN) aveload = 1809 (~0%) Jun 30 12:07:12.697901 (XEN) idlers: 2 Jun 30 12:07:12.697940 (XEN) tickled: 0 Jun 30 12:07:12.709694 (XEN) fully idle cores: 2 Jun 30 12:07:12.709694 (XEN) Domain info: Jun 30 12:07:12.709694 (XEN) Domain: 0 w 256 c 0 v 2 Jun 30 12:07:12.709694 (XEN) 1: [0.0] flags=0 cpu=0 credit=2769664 [w=256] load=1553 (~0%) Jun 30 12:07:12.721764 (XEN) 2: [0.1] flags=0 cpu=1 credit=8776626 [w=256] load=260 (~0%) Jun 30 12:07:12.721833 (XEN) Runqueue 0: Jun 30 12:07:12.721874 (XEN) CPU[00] runq=0, sibling={0}, core={0-1} Jun 30 12:07:12.733754 (XEN) CPU[01] runq=0, sibling={1}, core={0-1} Jun 30 12:07:12.733814 (XEN) run: [0.1] flags=2 cpu=1 credit=8776626 [w=256] load=260 (~0%) Jun 30 12:07:12.733866 (XEN) RUNQ: Jun 30 12:07:12.745751 (XEN) CPUs info: Jun 30 12:07:12.745831 (XEN) CPU[00] current=d[IDLE]v0, curr=d[IDLE]v0, prev=NULL Jun 30 12:07:12.745882 (XEN) CPU[01] current=d[IDLE]v1, curr=d[IDLE]v1, prev=NULL Jun 30 12:07:12.757685 Jun 30 12:07:14.646548 Jun 30 12:07:16.410318 Jun 30 12:07:16.653850 (XEN) Synced stime skew: max=83ns avg=83ns samples=1 current=83ns Jun 30 12:07:16.677795 (XEN) Synced cycles skew: max=2 avg=2 samples=1 current=2 Jun 30 12:07:16.677856 Jun 30 12:07:16.680005 Jun 30 12:07:18.654635 Jun 30 12:07:20.419206 Jun 30 12:07:20.666339 Jun 30 12:07:22.426008 Jun 30 12:07:22.670123 I Jun 30 12:07:23.865891 NIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 12:07:23.877717 Jun 30 12:07:34.674523 (XEN) 'q' pressed -> dumping domain info (now = 2553269404916) Jun 30 12:07:34.693847 (XEN) General information for domain 0: Jun 30 12:07:34.693907 (XEN) refcnt=3 dying=0 paus Jun 30 12:07:34.696178 e_count=0 Jun 30 12:07:34.705724 (XEN) nr_pages=131072 xenheap_pages=2 dirty_cpus={} max_pages=131072 Jun 30 12:07:34.705787 (XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=00000020 Jun 30 12:07:34.717743 (XEN) p2m mappings for domain 0 (vmid 1): Jun 30 12:07:34.717803 (XEN) 1G mappings: 0 (shattered 0) Jun 30 12:07:34.717849 (XEN) 2M mappings: 225 (shattered 31) Jun 30 12:07:34.729704 (XEN) 4K mappings: 8553 Jun 30 12:07:34.729754 (XEN) Rangesets belonging to domain 0: Jun 30 12:07:34.729798 (XEN) Interrupts { 32-72, 74, 77-79, 82-84, 86, 88-100, 103-104, 107-110, 114, 116-120, 123, 126-128, 138, 144, 146-147, 149-151, 156 } Jun 30 12:07:34.741741 (XEN) I/O Memory { 2020-2050, 3810-3811, 3830-3831, 3860-3861, 10000-10001, 10010-10045, 10050-10055, 10060-10061, 101b0-101b1, 101d0-101d1, 101e0-101e1, 10440-10441, 10800-10801, 10830-10831, 10850-10851, 10a60-10a61, 10d10-10d11, 11000-11010, 11200-11201, 11210-11211, 11400-11401, 11800-11805, 11c00-11c01, 11c10-11c11, 11d40-11d41, 11f20-11f21, 12000-12010, 12100-12101, 12110-12111, 12120-12121, 12130-12131, 12170-12171, 121a0-121a1, 121b0-121b1, 121d0-121d1, 12200-12201, 12210-12211, 12220-12221, 12230-12231, 12250-12251, 122f0-122f1, 12c00-12c01, 12c10-12c11, 12c30-12c31, 12c60-12c61, 12c70-12c71, 12c80-12c81, 12c90-12c91, 12ca0-12ca1, 12cb0-12cb1, 12cc0-12cc1, 12cd0-12cd1, 12ce0-12ce1, 12d10-12d11, 12d20-12d21, 12d30-12d31, 12d40-12d41, 12d60-12d61, 12d70-12d71, 12dd0-12dd1, 13260-13261, 13270-13271, 13280-13281, 13290-13291, 132a0-132a1, 132b0-132b1, 132c0-132c1, 132d0-132d1, 132e0-132e1, 132f0-132f1, 13400-13401, 13c40-13c41, 13c50-13c51, 13e00-13e01, 13e10-13e11, 13e20-13e21, 13e30-13e31, 13e80-13e81, 13e90-13e91, 13ea0-13ea1, 13eb0-13eb1, 14400-14440, 14450-14460, 14500-14510, 14530-145a0, 145b0-145b1, 14640-14641, 14650-14651 } Jun 30 12:07:34.837775 (XEN) NODE affinity for domain 0: [0] Jun 30 12:07:34.849749 (XEN) VCPU information and callbacks for domain 0: Jun 30 12:07:34.849810 (XEN) UNIT0 affinities: hard={0-1} soft={0-1} Jun 30 12:07:34.849857 (XEN) VCPU0: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Jun 30 12:07:34.861768 (XEN) pause_count=0 pause_flags=1 Jun 30 12:07:34.861826 (XEN) GICH_LRs (vcpu 0) mask=0 Jun 30 12:07:34.861871 (XEN) VCPU_LR[0]=0 Jun 30 12:07:34.873751 (XEN) VCPU_LR[1]=0 Jun 30 12:07:34.873806 (XEN) VCPU_LR[2]=0 Jun 30 12:07:34.873848 (XEN) VCPU_LR[3]=0 Jun 30 12:07:34.873889 (XEN) No periodic timer Jun 30 12:07:34.873931 (XEN) UNIT1 affinities: hard={0-1} soft={0-1} Jun 30 12:07:34.885746 (XEN) VCPU1: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Jun 30 12:07:34.885837 (XEN) pause_count=0 pause_flags=1 Jun 30 12:07:34.885885 (XEN) GICH_LRs (vcpu 1) mask=0 Jun 30 12:07:34.897742 (XEN) VCPU_LR[0]=0 Jun 30 12:07:34.897797 (XEN) VCPU_LR[1]=0 Jun 30 12:07:34.897838 (XEN) VCPU_LR[2]=0 Jun 30 12:07:34.897879 (XEN) VCPU_LR[3]=0 Jun 30 12:07:34.897919 (XEN) No periodic timer Jun 30 12:07:34.909721 (XEN) Notifying guest 0:0 (virq 1, port 0) Jun 30 12:07:34.909780 (XEN) Notifying guest 0:1 (virq 1, port 0) Jun 30 12:07:34.909825 Jun 30 12:07:46.667843 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 30 12:07:46.855882 Jun 30 12:07:46.855922 arndale-metrocentre login: Jun 30 12:07:46.855988 [ 2645.957527] sd 0:0:0:0: [sda] Synchronizing SCSI cache Jun 30 12:09:12.749807 [ 2645.967511] wake enabled for irq 119 (gpx1-4) Jun 30 12:09:12.761791 [ 2645.970530] wake enabled for irq 120 (gpx1-5) Jun 30 12:09:12.773806 [ 2645.975001] wake enabled for irq 121 (gpx1-6) Jun 30 12:09:12.773867 [ 2645.979363] wake enabled for irq 122 (gpx1-7) Jun 30 12:09:12.773914 [ 2645.983822] wake enabled for irq 123 (gpx2-0) Jun 30 12:09:12.785795 [ 2645.988231] wake enabled for irq 124 (gpx2-1) Jun 30 12:09:12.785856 [ 2645.993003] reboot: Resô Jun 30 12:09:13.121793 Jun 30 12:09:13.121817 Jun 30 12:09:13.121882 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 12:09:13.133678 Jun 30 12:09:13.133709 CPU: Exynos5250@1000MHz Jun 30 12:09:13.133744 Jun 30 12:09:13.133777 Board: Arndale Jun 30 12:09:13.133810 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 12:09:13.133839 ready Jun 30 12:09:13.133868 DRAM: 2 GiB Jun 30 12:09:13.145583 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 12:09:13.157741 trace: enabled Jun 30 12:09:13.193658 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 12:09:13.556737 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 12:09:13.616750 In: serial Jun 30 12:09:13.616805 Out: serial Jun 30 12:09:13.616846 Err: serial Jun 30 12:09:13.616886 SCSI: ARNDALE SCSI INIT Jun 30 12:09:13.616928 Target spinup took 0 ms. Jun 30 12:09:13.628687 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 12:09:13.628751 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 12:09:13.628800 Net: Net Initialization Skipped Jun 30 12:09:13.640594 No ethernet found. Jun 30 12:09:13.640594 Hostname: arndale-metrocentre Jun 30 12:09:13.640594 Hit any key to stop autoboot: 2  1  0 Jun 30 12:09:15.569645 (Re)start USB... Jun 30 12:09:15.569694 USB0: USB EHCI 1.00 Jun 30 12:09:15.569718 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 12:09:21.169629 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 12:09:21.169674 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 12:09:21.613607 Waiting for Ethernet connection... done. Jun 30 12:09:23.221727 BOOTP broadcast 1 Jun 30 12:09:23.221798 BOOTP broadcast 2 Jun 30 12:09:24.445731 DHCP client bound to address 10.149.64.44 (1279 ms) Jun 30 12:09:24.445796 Using asx0 device Jun 30 12:09:24.445839 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 12:09:24.457751 Filename 'pxelinux.0'. Jun 30 12:09:24.457807 Load address: 0x43e00000 Jun 30 12:09:24.457851 Loading: *### Jun 30 12:09:24.481686 2.5 MiB/s Jun 30 12:09:24.481716 done Jun 30 12:09:24.481738 Bytes transferred = 42430 (a5be hex) Jun 30 12:09:24.481762 missing environment variable: pxeuuid Jun 30 12:09:24.481787 Retrieving file: pxelinux.cfg/0A95402C Jun 30 12:09:24.493736 Using asx0 device Jun 30 12:09:24.493791 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 12:09:24.493842 Filename 'pxelinux.cfg/0A95402C'. Jun 30 12:09:24.493886 Load address: 0x51000000 Jun 30 12:09:24.505732 Loading: *# Jun 30 12:09:24.505787 358.4 KiB/s Jun 30 12:09:24.505863 done Jun 30 12:09:24.505904 Bytes transferred = 734 (2de hex) Jun 30 12:09:24.505948 Config file found Jun 30 12:09:24.505988 Ignoring unknown command: serial Jun 30 12:09:24.517745 1: ^Overwrite Jun 30 12:09:24.517799 Retrieving file: /osstest/tmp//arndale-metrocentre--initrd.gz Jun 30 12:09:24.517848 Using asx0 device Jun 30 12:09:24.517889 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 12:09:24.529735 Filename '/osstest/tmp//arndale-metrocentre--initrd.gz'. Jun 30 12:09:24.529796 Load address: 0x43300000 Jun 30 12:09:24.529838 Loading: *################################################################# Jun 30 12:09:24.853676 ################################################################# Jun 30 12:09:25.177654 ################################################################# Jun 30 12:09:35.516709 ################################################################# Jun 30 12:09:35.844516 ################################################################# Jun 30 12:09:41.172511 ################################################################# Jun 30 12:09:56.509674 ################################################################# Jun 30 12:10:01.837705 #############################################################T #### Jun 30 12:10:12.177704 #############################T #################################### Jun 30 12:10:17.485696 ####T #T #######################T ##################################### Jun 30 12:10:32.801742 ################################################################# Jun 30 12:10:38.093746 ##########################################################T ####### Jun 30 12:10:58.401748 ################################################################# Jun 30 12:10:58.713692 ################################################################# Jun 30 12:10:59.001677 ################################################################# Jun 30 12:10:59.301698 ################################################################# Jun 30 12:10:59.577693 ################################################################# Jun 30 12:10:59.889681 ################################################################# Jun 30 12:11:00.141692 ################################################################# Jun 30 12:11:00.441685 ################################################################# Jun 30 12:11:00.705683 ################################################################# Jun 30 12:11:00.993684 ################################################################# Jun 30 12:11:01.293685 ################################################################# Jun 30 12:11:01.581744 ################################################################# Jun 30 12:11:01.881765 ################################################################# Jun 30 12:11:02.169702 ################################################################# Jun 30 12:11:02.457727 ################################################################# Jun 30 12:11:02.733690 ###################################### Jun 30 12:11:02.901746 250 KiB/s Jun 30 12:11:02.901801 done Jun 30 12:11:02.901841 Bytes transferred = 26310349 (19176cd hex) Jun 30 12:11:02.901887 Retrieving file: /osstest/debian-installer/armhf/2024-03-26-bookworm/linux Jun 30 12:11:02.913769 Waiting for Ethernet connection... done. Jun 30 12:11:02.961728 Using asx0 device Jun 30 12:11:02.961784 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 12:11:02.973796 Filename '/osstest/debian-installer/armhf/2024-03-26-bookworm/linux'. Jun 30 12:11:02.973862 Load address: 0x42000000 Jun 30 12:11:02.985733 Loading: *################################################################# Jun 30 12:11:03.309713 ################################################################# Jun 30 12:11:03.625716 ################################################################# Jun 30 12:11:03.961693 ################################################################# Jun 30 12:11:04.285707 ################################################################# Jun 30 12:11:04.609646 ############################################# Jun 30 12:11:04.825713 2.7 MiB/s Jun 30 12:11:04.825768 done Jun 30 12:11:04.825807 Bytes transferred = 5423616 (52c200 hex) Jun 30 12:11:04.837775 append: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-metrocentre url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=60125 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-metrocentre--initrd.gz --- console=ttySAC2,115200n8 Jun 30 12:11:04.873792 Retrieving file: /osstest/debian-installer/armhf/2024-03-26-bookworm/dtbs/exynos5250-arndale.dtb Jun 30 12:11:04.885774 Using asx0 device Jun 30 12:11:04.885827 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 12:11:04.897753 Filename '/osstest/debian-installer/armhf/2024-03-26-bookworm/dtbs/exynos5250-arndale.dtb'. Jun 30 12:11:04.897824 Load address: 0x43000000 Jun 30 12:11:04.897867 Loading: *#### Jun 30 12:11:04.921724 2.3 MiB/s Jun 30 12:11:04.921779 done Jun 30 12:11:04.921818 Bytes transferred = 46686 (b65e hex) Jun 30 12:11:04.921862 Kernel image @ 0x42000000 [ 0x000000 - 0x52c200 ] Jun 30 12:11:04.933777 ## Flattened Device Tree blob at 43000000 Jun 30 12:11:04.933835 Booting using the fdt blob at 0x43000000 Jun 30 12:11:04.933880 Loading Ramdisk to 4e6e8000, end 4ffff6cd ... OK Jun 30 12:11:05.365721 Loading Device Tree to 4e6d9000, end 4e6e765d ... OK Jun 30 12:11:05.365783 Jun 30 12:11:05.377728 Starting kernel ...(fake run for tracing) Jun 30 12:11:05.377788 Jun 30 12:11:05.377827 Jun 30 12:11:05.377863 Starting kernel ... Jun 30 12:11:05.377904 Jun 30 12:11:05.377941 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 12:11:11.437801 [ 0.000000] Linux version 6.1.0-18-armmp (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.76-1 (2024-02-01) Jun 30 12:11:11.449766 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 30 12:11:11.449829 [ 0.000000] CPU: div instructions available: patching division code Jun 30 12:11:11.461805 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 12:11:11.473755 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 12:11:11.473824 [ 0.000000] Memory policy: Data cache writealloc Jun 30 12:11:11.485774 [ 0.000000] efi: UEFI not found. Jun 30 12:11:11.485831 [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 Jun 30 12:11:11.485877 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 12:11:11.497754 [ 0.000000] Zone ranges: Jun 30 12:11:11.497810 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Jun 30 12:11:11.497858 [ 0.000000] Normal empty Jun 30 12:11:11.509765 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Jun 30 12:11:11.509827 [ 0.000000] Movable zone start for each node Jun 30 12:11:11.509873 [ 0.000000] Early memory node ranges Jun 30 12:11:11.521754 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 12:11:11.521815 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 12:11:11.533763 [ 0.000000] percpu: Embedded 18 pages/cpu s41620 r8192 d23916 u73728 Jun 30 12:11:11.533825 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Jun 30 12:11:11.545766 [ 0.000000] Kernel command line: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-metrocentre url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=60125 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-metrocentre--initrd.gz --- console=ttySAC2,115200n8 Jun 30 12:11:11.593789 [ 0.000000] Unknown kernel command line parameters "preseed --- vga=normal auto=true hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=60125 domain=test-lab.xenproject.org", will be passed to user space. Jun 30 12:11:11.629767 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Jun 30 12:11:11.629834 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 12:11:11.641776 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Jun 30 12:11:11.653757 [ 0.000000] Memory: 2015996K/2097152K available (11264K kernel code, 1696K rwdata, 3716K rodata, 2048K init, 378K bss, 64772K reserved, 16384K cma-reserved, 1294332K highmem) Jun 30 12:11:11.665765 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 12:11:11.665827 [ 0.000000] ftrace: allocating 39582 entries in 117 pages Jun 30 12:11:11.677758 [ 0.000000] ftrace: allocated 116 pages with 4 groups Jun 30 12:11:11.677817 [ 0.000000] trace event string verifier disabled Jun 30 12:11:11.689770 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 12:11:11.689830 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Jun 30 12:11:11.701762 [ 0.000000] Rude variant of Tasks RCU enabled. Jun 30 12:11:11.701822 [ 0.000000] Tracing variant of Tasks RCU enabled. Jun 30 12:11:11.701869 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Jun 30 12:11:11.713767 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 12:11:11.725768 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 12:11:11.725829 [ 0.000000] GIC: Using split EOI/Deactivate mode Jun 30 12:11:11.725876 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 12:11:11.737775 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 12:11:11.749751 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Jun 30 12:11:11.749813 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Jun 30 12:11:11.761769 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Jun 30 12:11:11.761836 [ 0.000019] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Jun 30 12:11:11.773788 [ 0.002631] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Jun 30 12:11:11.785761 [ 0.002646] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 12:11:11.785836 [ 0.002661] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 12:11:11.797771 [ 0.002672] Ignoring duplicate/late registration of read_current_timer delay Jun 30 12:11:11.809755 [ 0.003039] Console: colour dummy device 80x30 Jun 30 12:11:11.809814 [ 0.003080] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Jun 30 12:11:11.821765 [ 0.003093] CPU: Testing write buffer coherency: ok Jun 30 12:11:11.821824 [ 0.003136] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 12:11:11.833777 [ 0.003144] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 12:11:11.845758 [ 0.003150] pid_max: default: 32768 minimum: 301 Jun 30 12:11:11.845818 [ 0.003508] LSM: Security Framework initializing Jun 30 12:11:11.845865 [ 0.003579] landlock: Up and running. Jun 30 12:11:11.857705 [ 0.003584] Yama: disabled by default; enable with sysctl kernel.yama.* Jun 30 12:11:11.857751 [ 0.003771] AppArmor: AppArmor initialized Jun 30 12:11:11.869818 [ 0.003783] TOMOYO Linux initialized Jun 30 12:11:11.869848 [ 0.003824] LSM support for eBPF active Jun 30 12:11:11.869886 [ 0.004068] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 12:11:11.881767 [ 0.004082] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 12:11:11.893763 [ 0.005523] /cpus/cpu@0 missing clock-frequency property Jun 30 12:11:11.893825 [ 0.005549] /cpus/cpu@1 missing clock-frequency property Jun 30 12:11:11.893873 [ 0.005561] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 12:11:11.905768 [ 0.006520] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 12:11:11.905835 [ 0.006526] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 12:11:11.917760 [ 0.006631] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 12:11:11.929869 [ 0.006637] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 12:11:11.929932 [ 0.006782] Setting up static identity map for 0x40300000 - 0x403000ac Jun 30 12:11:11.941769 [ 0.007950] rcu: Hierarchical SRCU implementation. Jun 30 12:11:11.941829 [ 0.007955] rcu: Max phase no-delay instances is 1000. Jun 30 12:11:11.941878 [ 0.010101] EFI services will not be available. Jun 30 12:11:11.953763 [ 0.010452] smp: Bringing up secondary CPUs ... Jun 30 12:11:11.953821 [ 0.011199] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 12:11:11.965760 [ 0.011212] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 12:11:11.965832 [ 0.011344] smp: Brought up 1 node, 2 CPUs Jun 30 12:11:11.977799 [ 0.011352] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 12:11:11.977862 [ 0.011360] CPU: All CPU(s) started in HYP mode. Jun 30 12:11:11.989757 [ 0.011364] CPU: Virtualization extensions available. Jun 30 12:11:11.989817 [ 0.012022] devtmpfs: initialized Jun 30 12:11:11.989861 [ 0.023052] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 12:11:12.001766 [ 0.023304] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Jun 30 12:11:12.013795 [ 0.023329] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 12:11:12.013858 [ 0.023820] pinctrl core: initialized pinctrl subsystem Jun 30 12:11:12.025717 [ 0.024549] DMI not present or invalid. Jun 30 12:11:12.025768 [ 0.025231] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 12:11:12.037764 [ 0.030585] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 12:11:12.037829 [ 0.032138] audit: initializing netlink subsys (disabled) Jun 30 12:11:12.049760 [ 0.032343] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 Jun 30 12:11:12.049829 [ 0.033510] thermal_sys: Registered thermal governor 'fair_share' Jun 30 12:11:12.061769 [ 0.033517] thermal_sys: Registered thermal governor 'bang_bang' Jun 30 12:11:12.061831 [ 0.033521] thermal_sys: Registered thermal governor 'step_wise' Jun 30 12:11:12.073764 [ 0.033526] thermal_sys: Registered thermal governor 'user_space' Jun 30 12:11:12.073826 [ 0.033530] thermal_sys: Registered thermal governor 'power_allocator' Jun 30 12:11:12.085768 [ 0.033898] No ATAGs? Jun 30 12:11:12.085824 [ 0.033967] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jun 30 12:11:12.097769 [ 0.033975] hw-breakpoint: maximum watchpoint size is 8 bytes. Jun 30 12:11:12.097830 [ 0.035071] Serial: AMBA PL011 UART driver Jun 30 12:11:12.109759 [ 0.091441] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Jun 30 12:11:12.109829 [ 0.102687] iommu: Default domain type: Translated Jun 30 12:11:12.121756 [ 0.102695] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 12:11:12.121839 [ 0.103658] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Jun 30 12:11:12.133811 [ 0.104231] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 12:11:12.133871 [ 0.104243] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 12:11:12.145762 [ 0.104761] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 12:11:12.145834 [ 0.104791] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 12:11:12.157777 [ 0.104971] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 12:11:12.169757 [ 0.105329] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 12:11:12.169819 [ 0.105339] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 12:11:12.169868 [ 0.105746] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 12:11:12.181759 [ 0.106034] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 12:11:12.181818 [ 0.106044] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 12:11:12.193777 [ 0.106317] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 12:11:12.193838 [ 0.106415] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 12:11:12.205754 [ 0.106424] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 12:11:12.205816 [ 0.106622] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 12:11:12.205864 [ 0.106818] pps_core: LinuxPPS API ver. 1 registered Jun 30 12:11:12.217741 [ 0.106823] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 12:11:12.229749 [ 0.106839] PTP clock support registered Jun 30 12:11:12.229808 [ 0.108439] NetLabel: Initializing Jun 30 12:11:12.229853 [ 0.108444] NetLabel: domain hash size = 128 Jun 30 12:11:12.241760 [ 0.108450] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Jun 30 12:11:12.241865 [ 0.108503] NetLabel: unlabeled traffic allowed by default Jun 30 12:11:12.253753 [ 0.108669] vgaarb: loaded Jun 30 12:11:12.253809 [ 0.109278] clocksource: Switched to clocksource mct-frc Jun 30 12:11:12.253857 [ 0.109915] VFS: Disk quotas dquot_6.6.0 Jun 30 12:11:12.265754 [ 0.110002] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jun 30 12:11:12.265819 [ 0.110741] AppArmor: AppArmor Filesystem Enabled Jun 30 12:11:12.277761 [ 0.120593] NET: Registered PF_INET protocol family Jun 30 12:11:12.277822 [ 0.120799] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Jun 30 12:11:12.289755 [ 0.122275] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 12:11:12.289824 [ 0.122376] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 12:11:12.301762 [ 0.122401] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Jun 30 12:11:12.313767 [ 0.122504] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Jun 30 12:11:12.313834 [ 0.122734] TCP: Hash tables configured (established 8192 bind 8192) Jun 30 12:11:12.325756 [ 0.122948] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Jun 30 12:11:12.325824 [ 0.123056] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 12:11:12.337714 [ 0.123096] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 12:11:12.337749 [ 0.123292] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 12:11:12.349769 [ 0.123327] NET: Registered PF_XDP protocol family Jun 30 12:11:12.349827 [ 0.123339] PCI: CLS 0 bytes, default 64 Jun 30 12:11:12.361758 [ 0.124445] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Jun 30 12:11:12.361826 [ 0.124824] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Jun 30 12:11:12.373766 [ 0.129621] Trying to unpack rootfs image as initramfs... Jun 30 12:11:12.373826 [ 0.183775] Initialise system trusted keyrings Jun 30 12:11:12.385768 [ 0.183842] Key type blacklist registered Jun 30 12:11:12.385845 [ 0.184627] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Jun 30 12:11:12.397753 [ 0.192202] zbud: loaded Jun 30 12:11:12.397808 [ 0.193241] integrity: Platform Keyring initialized Jun 30 12:11:12.397856 [ 0.193337] integrity: Machine keyring initialized Jun 30 12:11:12.409763 [ 0.193347] Key type asymmetric registered Jun 30 12:11:12.409822 [ 0.193354] Asymmetric key parser 'x509' registered Jun 30 12:11:12.409869 [ 1.504929] Freeing initrd memory: 25696K Jun 30 12:11:12.421815 [ 1.516467] alg: self-tests for CTR-KDF (hmac(sha256)) passed Jun 30 12:11:12.421878 [ 1.516757] bounce: pool size: 64 pages Jun 30 12:11:12.421923 [ 1.516922] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Jun 30 12:11:12.433788 [ 1.517085] io scheduler mq-deadline registered Jun 30 12:11:12.433846 [ 1.522287] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Jun 30 12:11:12.445777 [ 1.543321] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 12:11:12.457767 [ 1.543333] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 12:11:12.469764 [ 1.545664] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 12:11:12.469832 [ 1.545673] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 12:11:12.481778 [ 1.546476] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 12:11:12.493763 [ 1.546485] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 12:11:12.493834 [ 1.547280] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 12:11:12.505775 [ 1.547288] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 12:11:12.517778 [ 1.549741] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 12:11:12.529771 [ 1.552527] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 12:11:12.529862 [ 1.555273] Serial: AMBA driver Jun 30 12:11:12.529933 [ 1.555515] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 12:11:12.541767 [ 1.555986] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 12:11:12.553756 [ 1.556453] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 12:11:12.565763 [ 2.687349] printk: console [ttySAC2] enabled Jun 30 12:11:12.565823 [ 2.692156] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Jun 30 12:11:12.577710 [ 2.702841] STM32 USART driver initialized Jun 30 12:11:12.577768 [ 2.716987] mousedev: PS/2 mouse device common for all mice Jun 30 12:11:12.589742 [ 2.748256] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 12:11:12.625737 [ 2.756882] s5m-rtc s5m-rtc: setting system clock to 2024-06-30T12:11:15 UTC (1719749475) Jun 30 12:11:12.637775 [ 2.766755] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Jun 30 12:11:12.649734 [ 2.774208] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 12:11:12.649797 [ 2.782196] NET: Registered PF_INET6 protocol family Jun 30 12:11:12.661711 [ 2.795955] Segment Routing with IPv6 Jun 30 12:11:12.673768 [ 2.798241] In-situ OAM (IOAM) with IPv6 Jun 30 12:11:12.673826 [ 2.802205] mip6: Mobile IPv6 Jun 30 12:11:12.673870 [ 2.805016] NET: Registered PF_PACKET protocol family Jun 30 12:11:12.685775 [ 2.810193] mpls_gso: MPLS GSO support Jun 30 12:11:12.685833 [ 2.814465] ThumbEE CPU extension supported. Jun 30 12:11:12.685880 [ 2.818115] Registering SWP/SWPB emulation handler Jun 30 12:11:12.697765 [ 2.823268] registered taskstats version 1 Jun 30 12:11:12.697822 [ 2.826928] Loading compiled-in X.509 certificates Jun 30 12:11:12.709685 [ 3.283304] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Jun 30 12:11:13.168627 [ 3.290646] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Jun 30 12:11:13.180648 [ 3.301768] zswap: loaded using pool lzo/zbud Jun 30 12:11:13.180648 [ 3.305686] Key type .fscrypt registered Jun 30 12:11:13.180648 [ 3.308930] Key type fscrypt-provisioning registered Jun 30 12:11:13.192701 [ 3.322809] Key type encrypted registered Jun 30 12:11:13.204641 [ 3.325402] AppArmor: AppArmor sha1 policy hashing enabled Jun 30 12:11:13.204641 [ 3.330917] ima: No TPM chip found, activating TPM-bypass! Jun 30 12:11:13.216733 [ 3.336323] ima: Allocated hash algorithm: sha256 Jun 30 12:11:13.216733 [ 3.341102] ima: No architecture policies found Jun 30 12:11:13.216733 [ 3.345575] evm: Initialising EVM extended attributes: Jun 30 12:11:13.228641 [ 3.350620] evm: security.selinux Jun 30 12:11:13.228641 [ 3.353922] evm: security.SMACK64 (disabled) Jun 30 12:11:13.228641 [ 3.358176] evm: security.SMACK64EXEC (disabled) Jun 30 12:11:13.240660 [ 3.362777] evm: security.SMACK64TRANSMUTE (disabled) Jun 30 12:11:13.240660 [ 3.367807] evm: security.SMACK64MMAP (disabled) Jun 30 12:11:13.252638 [ 3.372405] evm: security.apparmor Jun 30 12:11:13.252638 [ 3.375789] evm: security.ima Jun 30 12:11:13.252638 [ 3.378745] evm: security.capability Jun 30 12:11:13.252638 [ 3.382299] evm: HMAC attrs: 0x1 Jun 30 12:11:13.264587 [ 3.965990] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 12:11:13.852565 [ 3.992250] Freeing unused kernel image (initmem) memory: 2048K Jun 30 12:11:13.876640 [ 3.997114] Checked W+X mappings: passed, no W+X pages found Jun 30 12:11:13.876640 [ 4.002377] Run /init as init process Jun 30 12:11:13.876640 [ 4.578170] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 12:11:14.456605 [ 4.636615] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 12:11:14.516642 [ 4.643672] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 12:11:14.528610 [ 4.656918] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 12:11:14.540600 [ 4.672422] usbcore: registered new interface driver usbfs Jun 30 12:11:14.552750 [ 4.686246] usbcore: registered new interface driver hub Jun 30 12:11:14.564767 [ 4.708511] usbcore: registered new device driver usb Jun 30 12:11:14.588793 [ 4.716323] phy phy-12130000.phy.3: phy_power_on was called before phy_init Jun 30 12:11:14.600746 [ 4.732032] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 12:11:14.612816 [ 4.736095] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Jun 30 12:11:14.624822 [ 4.744319] phy phy-12130000.phy.3: phy_power_on was called before phy_init Jun 30 12:11:14.624886 [ 4.750798] exynos-ohci 12120000.usb: USB Host Controller Jun 30 12:11:14.636795 [ 4.756053] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Jun 30 12:11:14.636864 [ 4.785206] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 12:11:14.660778 [ 4.796214] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Jun 30 12:11:14.672798 [ 4.808267] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Jun 30 12:11:14.684785 [ 4.825317] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 12:11:14.708802 [ 4.832319] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 12:11:14.720677 [ 4.839163] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 12:11:14.720715 [ 4.846334] usb usb1: Product: EHCI Host Controller Jun 30 12:11:14.732646 [ 4.851208] usb usb1: Manufacturer: Linux 6.1.0-18-armmp ehci_hcd Jun 30 12:11:14.732646 [ 4.857288] usb usb1: SerialNumber: 12110000.usb Jun 30 12:11:14.732646 [ 4.876817] hub 1-0:1.0: USB hub found Jun 30 12:11:14.756641 [ 4.881335] usb3503 usb-hub: switched to HUB mode Jun 30 12:11:14.756641 [ 4.882298] hub 1-0:1.0: 3 ports detected Jun 30 12:11:14.768638 [ 4.884572] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 12:11:14.768638 [ 4.895380] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Jun 30 12:11:14.780643 [ 4.902686] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 12:11:14.780643 [ 4.909857] usb usb2: Product: USB Host Controller Jun 30 12:11:14.792644 [ 4.914628] usb usb2: Manufacturer: Linux 6.1.0-18-armmp ohci_hcd Jun 30 12:11:14.792644 [ 4.920702] usb usb2: SerialNumber: 12120000.usb Jun 30 12:11:14.804629 [ 4.927970] hub 2-0:1.0: USB hub found Jun 30 12:11:14.804629 [ 4.930332] hub 2-0:1.0: 3 ports detected Jun 30 12:11:14.804629 [ 5.205354] usb 1-3: new high-speed USB device number 2 using exynos-ehci Jun 30 12:11:15.080603 [ 5.226388] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 12:11:15.104623 [ 5.230478] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 12:11:15.116640 [ 5.238587] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 Jun 30 12:11:15.128635 [ 5.247499] xhci-hcd xhci-hcd.2.auto: irq 108, io mem 0x12000000 Jun 30 12:11:15.128635 [ 5.253678] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 12:11:15.128635 [ 5.258905] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 12:11:15.140644 [ 5.266548] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 12:11:15.152641 [ 5.273222] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 12:11:15.152641 [ 5.281290] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 12:11:15.164639 [ 5.288493] usb usb3: Product: xHCI Host Controller Jun 30 12:11:15.164639 [ 5.293351] usb usb3: Manufacturer: Linux 6.1.0-18-armmp xhci-hcd Jun 30 12:11:15.176640 [ 5.299433] usb usb3: SerialNumber: xhci-hcd.2.auto Jun 30 12:11:15.176640 [ 5.305482] hub 3-0:1.0: USB hub found Jun 30 12:11:15.188770 [ 5.308054] hub 3-0:1.0: 1 port detected Jun 30 12:11:15.188833 [ 5.312923] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 12:11:15.200643 [ 5.320139] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Jun 30 12:11:15.200643 [ 5.328250] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 12:11:15.212641 [ 5.335459] usb usb4: Product: xHCI Host Controller Jun 30 12:11:15.212641 [ 5.340313] usb usb4: Manufacturer: Linux 6.1.0-18-armmp xhci-hcd Jun 30 12:11:15.224772 [ 5.346395] usb usb4: SerialNumber: xhci-hcd.2.auto Jun 30 12:11:15.224837 [ 5.352399] hub 4-0:1.0: USB hub found Jun 30 12:11:15.224882 [ 5.355018] hub 4-0:1.0: 1 port detected Jun 30 12:11:15.236677 [ 5.369771] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Jun 30 12:11:15.248628 [ 5.376522] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jun 30 12:11:15.260639 [ 5.384306] hub 1-3:1.0: USB hub found Jun 30 12:11:15.260639 [ 5.387500] hub 1-3:1.0: 3 ports detected Jun 30 12:11:15.272570 Starting system log daemon: syslogd, klogd. Jun 30 12:11:15.404582 /var/run/utmp: No such file or directory Jun 30 12:11:17.244595 [?1h=(B   Jun 30 12:11:17.292595  Jun 30 12:11:17.304589 [  (-*) ][ Jun 30 12:11 ] Jun 30 12:11:17.316720 [  (0*start) ][ Jun 30 12:11 ] Jun 30 12:11:17.328604 [  (0*start) ][ Jun 30 12:11 ] Jun 30 12:11:17.340718 [  (0*start) ][ Jun 30 12:11 ] Jun 30 12:11:17.352611 [  (0*start) ][ Jun 30 12:11 ]                        [  (0*start) ][ Jun 30 12:11 ][  (0*start) ][ Jun 30 12:11 ] Jun 30 12:11:17.409778 [ 0- start  (2*shell) ][ Jun 30 12:11 ] Jun 30 12:11:17.421756 [ 0- start  (2*shell) ][ Jun 30 12:11 ] Jun 30 12:11:17.433759 [ 0- start  (2*shell) ][ Jun 30 12:11 ] Jun 30 12:11:17.445772 [ 0- start  (2*shell) ][ Jun 30 12:11 ]                        [ 0- start  (2*shell) ][ Jun 30 12:11 ][ 0- start  (2*shell) ][ Jun 30 12:11 ] Jun 30 12:11:17.505769 [ 0 start 2- shell  (3*shell) ][ Jun 30 12:11 ] Jun 30 12:11:17.517768 [ 0 start 2- shell  (3*shell) ][ Jun 30 12:11 ] Jun 30 12:11:17.529765 [ 0 start 2- shell  (3*shell) ][ Jun 30 12:11 ] Jun 30 12:11:17.541771 [ 0 start 2- shell  (3*shell) ][ Jun 30 12:11 ]                        [ 0 start 2- shell  (3*shell) ][ Jun 30 12:11 ][ 0 start 2- shell  (3*shell) ][ Jun 30 12:11 ] Jun 30 12:11:17.601771 [ 0 start 2 shell 3- shell  (4*log) ][ Jun 30 12:11 ] Jun 30 12:11:17.613773 [ 0 start 2 shell 3- shell  (4*log) ][ Jun 30 12:11 ] Jun 30 12:11:17.625769 [ 0 start 2 shell 3- shell  (4*log) ][ Jun 30 12:11 ] Jun 30 12:11:17.637768 [ 0 start 2 shell 3- shell  (4*log) ][ Jun 30 12:11 ]                        [ 0 start 2 shell 3- shell  (4*log) ][ Jun 30 12:11 ][ 0 start 2 shell 3- shell  (4*log) ][ Jun 30 12:11 ] Jun 30 12:11:17.697792 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30 12:11 ] Jun 30 12:11:17.709776 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30 12:11 ] Jun 30 12:11:17.721678 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30 12:11 ] Jun 30 12:11:17.733772 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30 12:11 ]                        [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30 12:11 ][ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jun 30 12:11 ] Jun 30 12:11:17.793812 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 12:11 ] Jun 30 12:11:17.805773 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 12:11 ] Jun 30 12:11:17.817814 [  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 12:11 ] Jun 30 12:11:18.273771 Detecting network hardware ... 2%... 95%... 100% Jun 30 12:11:20.040529 Detecting link on eth0; please wait... ... 0%... 10%... 20% Jun 30 12:11:24.932554 Waiting for link-local address... ... 8%... 16%... 25%... 33%... 100% Jun 30 12:11:25.960552 Attempting IPv6 autoconfiguration... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 75%... 83%... 91%... 100% Jun 30 12:11:32.036540 Configuring the network with DHCP ... 0%... 100% Jun 30 12:11:35.200493 Checking the Debian archive mirror ... 25%... 50%... 75%... 100% Jun 30 12:11:43.389736 Loading additional components ... 0%... 10%... 20%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 12:12 ]... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Jun 30 12:12:17.377723 Setting up the clock ... 0%... 100% Jun 30 12:12:20.200541 Loading additional components ... 50%... 100% Jun 30 12:12:21.889699 Detecting disks and all other hardware ... 2%... 95%... 100% Jun 30 12:12:25.865701 Loading additional components ... 5%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Jun 30 12:12:34.865631 Loading additional components ... 25%... 50%... 75%... 100% Jun 30 12:12:37.265772 Starting up the partitioner ... 4%... 13%... 21%... 30%... 43%... 52%... 60%... 73%... 82%... 91%... 100% Jun 30 12:12:49.365883 Guided partitioning ... 16%... 33%... 50%... 66%... 83%... 100% Jun 30 12:12:57.897901 Starting up the partitioner ... 4%... 12%... 20%... 32%... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 12:13 ]... 52%... 60%... 72%... 80%... 92%... 100% Jun 30 12:13:07.997822 Partitions formatting ... 33% Jun 30 12:13:16.772748 Partitions formatting Jun 30 12:13:26.349726 Partitions formatting Installing the base system ... 0%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 12:14 ]... 17%... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 12:15 ]... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 12:16 ]... 48%... 50%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 12:17 ]...  Jun 30 12:17:18.989638  60%... 70%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 12:18 ]... 79%... 83%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 12:19 ][  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 12:20 ]... 91%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 12:21 ]... 100% Jun 30 12:21:45.952768 Configuring apt ... 7%... 14%... 14%... 21%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 12:22 ]... 35%... 42%... 50%... 61%... 71%. Jun 30 12:22:23.360785 ... 82%... 92%... 100% Jun 30 12:22:25.996706 Select and install software ... 1%... 10%... 13%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 12:23 ]... 20%... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 12:24 ]... 40%... 50%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 12:25 ]... Jun 30 12:25:14.117761 . 60%... 70%... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 12:26 ]... 88%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 12:27 ]... 90%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 12:28 ]... 94%... 100% Jun 30 12:28:21.424809 Finishing the installation ... 4%... 12%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 12:29 ][  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 12:30 ]... 16%... 20%... 32%... 40%... 44%... Jun 30 12:30:09.817796  52%... 60%... 72%... 80%... 92% The system is g Sent SIGKILL to all processes Jun 30 12:30:20.800654 Requesting system reboot Jun 30 12:30:20.800724 [ 1151.955879] reboot: Reű Jun 30 12:30:22.160652 Jun 30 12:30:22.160722 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 12:30:22.160774 Jun 30 12:30:22.160811 CPU: Exynos5250@1000MHz Jun 30 12:30:22.172611 Jun 30 12:30:22.172663 Board: Arndale Jun 30 12:30:22.172706 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 12:30:22.172754 ready Jun 30 12:30:22.172833 DRAM: 2 GiB Jun 30 12:30:22.172876 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 12:30:22.196567 trace: enabled Jun 30 12:30:22.232592 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 12:30:22.592546 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 12:30:22.652653 In: serial Jun 30 12:30:22.652706 Out: serial Jun 30 12:30:22.652746 Err: serial Jun 30 12:30:22.652785 SCSI: ARNDALE SCSI INIT Jun 30 12:30:22.652826 Target spinup took 0 ms. Jun 30 12:30:22.664571 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 12:30:22.664631 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 12:30:22.676562 Net: Net Initialization Skipped Jun 30 12:30:22.676619 No ethernet found. Jun 30 12:30:22.676661 Hostname: arndale-metrocentre Jun 30 12:30:22.676703 Hit any key to stop autoboot: 2  1  0 Jun 30 12:30:24.600425 (Re)start USB... Jun 30 12:30:24.600425 USB0: USB EHCI 1.00 Jun 30 12:30:24.612410 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 12:30:30.205822 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 12:30:30.205906 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 12:30:30.649723 Waiting for Ethernet connection... done. Jun 30 12:30:32.353763 BOOTP broadcast 1 Jun 30 12:30:32.353839 BOOTP broadcast 2 Jun 30 12:30:33.565701 BOOTP broadcast 3 Jun 30 12:30:37.465799 DHCP client bound to address 10.149.64.44 (5329 ms) Jun 30 12:30:37.465874 Using asx0 device Jun 30 12:30:37.465915 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 12:30:37.477731 Filename 'pxelinux.0'. Jun 30 12:30:37.477786 Load address: 0x43e00000 Jun 30 12:30:37.477828 Loading: *### Jun 30 12:30:37.489697 2.4 MiB/s Jun 30 12:30:37.501737 done Jun 30 12:30:37.501789 Bytes transferred = 42430 (a5be hex) Jun 30 12:30:37.501833 missing environment variable: pxeuuid Jun 30 12:30:37.501877 Retrieving file: pxelinux.cfg/0A95402C Jun 30 12:30:37.501919 Using asx0 device Jun 30 12:30:37.513757 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 12:30:37.513820 Filename 'pxelinux.cfg/0A95402C'. Jun 30 12:30:37.513864 Load address: 0x51000000 Jun 30 12:30:37.513904 Loading: *# Jun 30 12:30:37.525768 31.3 KiB/s Jun 30 12:30:37.525821 done Jun 30 12:30:37.525860 Bytes transferred = 65 (41 hex) Jun 30 12:30:37.525903 Config file found Jun 30 12:30:37.525943 Ignoring unknown command: serial Jun 30 12:30:37.525985 1: local Jun 30 12:30:37.526023 scanning bus for devices... Jun 30 12:30:37.537694 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 12:30:37.549783 Type: Hard Disk Jun 30 12:30:37.549838 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 12:30:37.561767 Found 1 device(s). Jun 30 12:30:37.561821 Jun 30 12:30:37.561859 SCSI device 0: Jun 30 12:30:37.561899 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 12:30:37.561946 Type: Hard Disk Jun 30 12:30:37.573754 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 12:30:37.573815 ... is now current device Jun 30 12:30:37.573857 Scanning scsi 0... Jun 30 12:30:37.573897 Found U-Boot script /boot.scr Jun 30 12:30:37.693715 641 bytes read in 47 ms (12.7 KiB/s) Jun 30 12:30:37.741724 ## Executing script at 50000000 Jun 30 12:30:37.753712 Loading dtbs/exynos5250-arndale.dtb Jun 30 12:30:37.753769 46686 bytes read in 1860 ms (24.4 KiB/s) Jun 30 12:30:39.561767 Loading vmlinuz-6.1.0-22-armmp-lpae Jun 30 12:30:39.573693 5505536 bytes read in 190 ms (27.6 MiB/s) Jun 30 12:30:39.777709 Loading initrd.img-6.1.0-22-armmp-lpae Jun 30 12:30:39.777768 25721114 bytes read in 1975 ms (12.4 MiB/s) Jun 30 12:30:41.701794 Booting Jun 30 12:30:41.701859 Kernel image @ 0x42000000 [ 0x000000 - 0x540200 ] Jun 30 12:30:41.701905 ## Flattened Device Tree blob at 43000000 Jun 30 12:30:41.701948 Booting using the fdt blob at 0x43000000 Jun 30 12:30:41.713740 Loading Ramdisk to 4e778000, end 4ffff91a ... OK Jun 30 12:30:42.121764 Loading Device Tree to 4e769000, end 4e77765d ... OK Jun 30 12:30:42.133745 Jun 30 12:30:42.133796 Starting kernel ...(fake run for tracing) Jun 30 12:30:42.145700 Jun 30 12:30:42.145751 Jun 30 12:30:42.145789 Starting kernel ... Jun 30 12:30:42.145831 Jun 30 12:30:42.145867 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 12:30:48.300878 [ 0.000000] Linux version 6.1.0-22-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.94-1 (2024-06-21) Jun 30 12:30:48.317121 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=30c5387d Jun 30 12:30:48.328874 [ 0.000000] CPU: div instructions available: patching division code Jun 30 12:30:48.328938 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 12:30:48.340760 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 12:30:48.340831 [ 0.000000] Memory policy: Data cache writealloc Jun 30 12:30:48.352781 [ 0.000000] efi: UEFI not found. Jun 30 12:30:48.352839 [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000 Jun 30 12:30:48.352888 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 12:30:48.364766 [ 0.000000] Zone ranges: Jun 30 12:30:48.364823 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Jun 30 12:30:48.364872 [ 0.000000] Normal empty Jun 30 12:30:48.376779 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Jun 30 12:30:48.376841 [ 0.000000] Movable zone start for each node Jun 30 12:30:48.376888 [ 0.000000] Early memory node ranges Jun 30 12:30:48.388777 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 12:30:48.388839 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 12:30:48.400776 [ 0.000000] percpu: Embedded 18 pages/cpu s44756 r8192 d20780 u73728 Jun 30 12:30:48.400841 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Jun 30 12:30:48.412783 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=ttySAC2,115200n8 Jun 30 12:30:48.424228 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Jun 30 12:30:48.436610 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 12:30:48.436610 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Jun 30 12:30:48.448649 [ 0.000000] Memory: 2015520K/2097152K available (12288K kernel code, 1714K rwdata, 3748K rodata, 2048K init, 382K bss, 65248K reserved, 16384K cma-reserved, 1294332K highmem) Jun 30 12:30:48.460588 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 12:30:48.472596 [ 0.000000] ftrace: allocating 39982 entries in 118 pages Jun 30 12:30:48.472596 [ 0.000000] ftrace: allocated 118 pages with 5 groups Jun 30 12:30:48.472596 [ 0.000000] trace event string verifier disabled Jun 30 12:30:48.484595 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 12:30:48.484595 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Jun 30 12:30:48.496727 [ 0.000000] Rude variant of Tasks RCU enabled. Jun 30 12:30:48.496792 [ 0.000000] Tracing variant of Tasks RCU enabled. Jun 30 12:30:48.496840 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Jun 30 12:30:48.508591 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 12:30:48.520698 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 12:30:48.520753 [ 0.000000] GIC: Using split EOI/Deactivate mode Jun 30 12:30:48.532719 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 12:30:48.532797 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 12:30:48.544585 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Jun 30 12:30:48.544585 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Jun 30 12:30:48.556587 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Jun 30 12:30:48.568584 [ 0.000018] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Jun 30 12:30:48.568584 [ 0.002640] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Jun 30 12:30:48.580589 [ 0.002653] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 12:30:48.592594 [ 0.002668] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 12:30:48.592594 [ 0.002679] Ignoring duplicate/late registration of read_current_timer delay Jun 30 12:30:48.604593 [ 0.003041] Console: colour dummy device 80x30 Jun 30 12:30:48.604593 [ 0.003080] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Jun 30 12:30:48.616588 [ 0.003093] CPU: Testing write buffer coherency: ok Jun 30 12:30:48.616588 [ 0.003134] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 12:30:48.628589 [ 0.003143] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 12:30:48.640522 [ 0.003149] pid_max: default: 32768 minimum: 301 Jun 30 12:30:48.640522 [ 0.003508] LSM: Security Framework initializing Jun 30 12:30:48.640522 [ 0.003580] landlock: Up and running. Jun 30 12:30:48.652595 [ 0.003585] Yama: disabled by default; enable with sysctl kernel.yama.* Jun 30 12:30:48.652595 [ 0.003766] AppArmor: AppArmor initialized Jun 30 12:30:48.664682 [ 0.003778] TOMOYO Linux initialized Jun 30 12:30:48.664682 [ 0.003823] LSM support for eBPF active Jun 30 12:30:48.664682 [ 0.004067] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 12:30:48.676592 [ 0.004081] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 12:30:48.688593 [ 0.005483] /cpus/cpu@0 missing clock-frequency property Jun 30 12:30:48.688593 [ 0.005512] /cpus/cpu@1 missing clock-frequency property Jun 30 12:30:48.688593 [ 0.005525] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 12:30:48.700594 [ 0.006473] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 12:30:48.712596 [ 0.006480] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 12:30:48.712596 [ 0.006584] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 12:30:48.724588 [ 0.006589] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 12:30:48.724588 [ 0.006729] Setting up static identity map for 0x40400000 - 0x404000ac Jun 30 12:30:48.736592 [ 0.007893] rcu: Hierarchical SRCU implementation. Jun 30 12:30:48.736592 [ 0.007900] rcu: Max phase no-delay instances is 1000. Jun 30 12:30:48.736592 [ 0.010023] EFI services will not be available. Jun 30 12:30:48.748594 [ 0.010361] smp: Bringing up secondary CPUs ... Jun 30 12:30:48.748594 [ 0.011099] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 12:30:48.760592 [ 0.011110] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 12:30:48.776633 [ 0.011252] smp: Brought up 1 node, 2 CPUs Jun 30 12:30:48.776633 [ 0.011261] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 12:30:48.776633 [ 0.011268] CPU: All CPU(s) started in HYP mode. Jun 30 12:30:48.776633 [ 0.011272] CPU: Virtualization extensions available. Jun 30 12:30:48.788546 [ 0.012142] devtmpfs: initialized Jun 30 12:30:48.788546 [ 0.022926] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 12:30:48.800503 [ 0.023158] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Jun 30 12:30:48.812582 [ 0.023183] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 12:30:48.812582 [ 0.023723] pinctrl core: initialized pinctrl subsystem Jun 30 12:30:48.824607 [ 0.024471] DMI not present or invalid. Jun 30 12:30:48.824607 [ 0.025148] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 12:30:48.824607 [ 0.026688] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 12:30:48.836594 [ 0.028165] audit: initializing netlink subsys (disabled) Jun 30 12:30:48.836594 [ 0.028368] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 Jun 30 12:30:48.848589 [ 0.029554] thermal_sys: Registered thermal governor 'fair_share' Jun 30 12:30:48.860592 [ 0.029561] thermal_sys: Registered thermal governor 'bang_bang' Jun 30 12:30:48.860592 [ 0.029565] thermal_sys: Registered thermal governor 'step_wise' Jun 30 12:30:48.872589 [ 0.029570] thermal_sys: Registered thermal governor 'user_space' Jun 30 12:30:48.872589 [ 0.029574] thermal_sys: Registered thermal governor 'power_allocator' Jun 30 12:30:48.884587 [ 0.029772] No ATAGs? Jun 30 12:30:48.884587 [ 0.029839] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jun 30 12:30:48.884587 [ 0.029847] hw-breakpoint: maximum watchpoint size is 8 bytes. Jun 30 12:30:48.896586 [ 0.030937] Serial: AMBA PL011 UART driver Jun 30 12:30:48.896586 [ 0.080489] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 30 12:30:48.908590 [ 0.087377] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Jun 30 12:30:48.920721 [ 0.091793] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages Jun 30 12:30:48.920790 [ 0.091801] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page Jun 30 12:30:48.932591 [ 0.098637] iommu: Default domain type: Translated Jun 30 12:30:48.932591 [ 0.098646] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 12:30:48.944592 [ 0.099625] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Jun 30 12:30:48.944592 [ 0.100161] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 12:30:48.956718 [ 0.100172] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 12:30:48.956786 [ 0.100809] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 12:30:48.968594 [ 0.100839] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 12:30:48.980588 [ 0.101043] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 12:30:48.980588 [ 0.101399] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 12:30:48.980588 [ 0.101409] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 12:30:48.992605 [ 0.101789] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 12:30:48.992605 [ 0.102081] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 12:30:49.004588 [ 0.102090] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 12:30:49.004588 [ 0.102383] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 12:30:49.016595 [ 0.102501] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 12:30:49.016595 [ 0.102509] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 12:30:49.016595 [ 0.102692] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 12:30:49.028722 [ 0.102909] pps_core: LinuxPPS API ver. 1 registered Jun 30 12:30:49.028788 [ 0.102915] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 12:30:49.040594 [ 0.102931] PTP clock support registered Jun 30 12:30:49.040594 [ 0.104471] NetLabel: Initializing Jun 30 12:30:49.052588 [ 0.104477] NetLabel: domain hash size = 128 Jun 30 12:30:49.052588 [ 0.104482] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Jun 30 12:30:49.064593 [ 0.104536] NetLabel: unlabeled traffic allowed by default Jun 30 12:30:49.064593 [ 0.104707] vgaarb: loaded Jun 30 12:30:49.064593 [ 0.105186] clocksource: Switched to clocksource mct-frc Jun 30 12:30:49.076584 [ 0.105762] VFS: Disk quotas dquot_6.6.0 Jun 30 12:30:49.076584 [ 0.105848] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jun 30 12:30:49.088593 [ 0.106613] AppArmor: AppArmor Filesystem Enabled Jun 30 12:30:49.088593 [ 0.116630] NET: Registered PF_INET protocol family Jun 30 12:30:49.088593 [ 0.116842] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Jun 30 12:30:49.100590 [ 0.118334] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 12:30:49.112592 [ 0.118436] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 12:30:49.112592 [ 0.118462] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Jun 30 12:30:49.124653 [ 0.118563] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Jun 30 12:30:49.136593 [ 0.118794] TCP: Hash tables configured (established 8192 bind 8192) Jun 30 12:30:49.136593 [ 0.119023] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Jun 30 12:30:49.148750 [ 0.119125] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 12:30:49.148812 [ 0.119166] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 12:30:49.160779 [ 0.119392] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 12:30:49.160841 [ 0.119427] NET: Registered PF_XDP protocol family Jun 30 12:30:49.172765 [ 0.119439] PCI: CLS 0 bytes, default 64 Jun 30 12:30:49.172824 [ 0.119935] Trying to unpack rootfs image as initramfs... Jun 30 12:30:49.172872 [ 0.120291] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Jun 30 12:30:49.184780 [ 0.125674] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Jun 30 12:30:49.196640 [ 0.190001] Initialise system trusted keyrings Jun 30 12:30:49.196697 [ 0.190115] Key type blacklist registered Jun 30 12:30:49.208609 [ 0.191338] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Jun 30 12:30:49.208609 [ 0.199218] zbud: loaded Jun 30 12:30:49.208609 [ 0.201317] integrity: Platform Keyring initialized Jun 30 12:30:49.220589 [ 0.201352] integrity: Machine keyring initialized Jun 30 12:30:49.220589 [ 0.201361] Key type asymmetric registered Jun 30 12:30:49.220808 [ 0.201369] Asymmetric key parser 'x509' registered Jun 30 12:30:49.232593 [ 1.421934] Freeing initrd memory: 25120K Jun 30 12:30:49.232593 [ 1.444110] alg: self-tests for CTR-KDF (hmac(sha256)) passed Jun 30 12:30:49.244592 [ 1.444380] bounce: pool size: 64 pages Jun 30 12:30:49.244592 [ 1.444560] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Jun 30 12:30:49.256593 [ 1.444723] io scheduler mq-deadline registered Jun 30 12:30:49.256593 [ 1.449892] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Jun 30 12:30:49.268588 [ 1.470760] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 12:30:49.268588 [ 1.470772] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 12:30:49.280607 [ 1.473039] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 12:30:49.292588 [ 1.473049] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 12:30:49.292588 [ 1.473894] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 12:30:49.304597 [ 1.473903] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 12:30:49.316586 [ 1.474736] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 12:30:49.316586 [ 1.474746] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 12:30:49.328596 [ 1.477044] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 12:30:49.340616 [ 1.479875] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 12:30:49.352594 [ 1.482652] Serial: AMBA driver Jun 30 12:30:49.352594 [ 1.482875] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 12:30:49.352594 [ 1.483350] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 12:30:49.364592 [ 1.483817] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 12:30:49.376589 [ 2.564632] printk: console [ttySAC2] enabled Jun 30 12:30:49.376589 [ 2.569484] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Jun 30 12:30:49.388587 [ 2.580095] STM32 USART driver initialized Jun 30 12:30:49.388587 [ 2.594479] mousedev: PS/2 mouse device common for all mice Jun 30 12:30:49.412542 [ 2.625653] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 12:30:49.436546 [ 2.634253] s5m-rtc s5m-rtc: setting system clock to 2024-06-30T12:30:50 UTC (1719750650) Jun 30 12:30:49.448720 [ 2.644102] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Jun 30 12:30:49.460600 [ 2.651555] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 12:30:49.472555 [ 2.659565] NET: Registered PF_INET6 protocol family Jun 30 12:30:49.472555 [ 2.683817] Segment Routing with IPv6 Jun 30 12:30:49.496587 [ 2.686109] In-situ OAM (IOAM) with IPv6 Jun 30 12:30:49.496587 [ 2.690018] mip6: Mobile IPv6 Jun 30 12:30:49.508596 [ 2.692880] NET: Registered PF_PACKET protocol family Jun 30 12:30:49.508596 [ 2.698056] mpls_gso: MPLS GSO support Jun 30 12:30:49.508596 [ 2.702083] ThumbEE CPU extension supported. Jun 30 12:30:49.520596 [ 2.705985] Registering SWP/SWPB emulation handler Jun 30 12:30:49.520596 [ 2.711147] registered taskstats version 1 Jun 30 12:30:49.520596 [ 2.714808] Loading compiled-in X.509 certificates Jun 30 12:30:49.532656 [ 3.174295] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Jun 30 12:30:49.988585 [ 3.181630] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Jun 30 12:30:50.000583 [ 3.192717] zswap: loaded using pool lzo/zbud Jun 30 12:30:50.012581 [ 3.196622] Key type .fscrypt registered Jun 30 12:30:50.012581 [ 3.199967] Key type fscrypt-provisioning registered Jun 30 12:30:50.012581 [ 3.224137] Key type encrypted registered Jun 30 12:30:50.036697 [ 3.226751] AppArmor: AppArmor sha1 policy hashing enabled Jun 30 12:30:50.048595 [ 3.232220] ima: No TPM chip found, activating TPM-bypass! Jun 30 12:30:50.048595 [ 3.237735] ima: Allocated hash algorithm: sha256 Jun 30 12:30:50.048595 [ 3.242348] ima: No architecture policies found Jun 30 12:30:50.060609 [ 3.246908] evm: Initialising EVM extended attributes: Jun 30 12:30:50.060609 [ 3.251958] evm: security.selinux Jun 30 12:30:50.072589 [ 3.255258] evm: security.SMACK64 (disabled) Jun 30 12:30:50.072589 [ 3.259508] evm: security.SMACK64EXEC (disabled) Jun 30 12:30:50.072589 [ 3.264106] evm: security.SMACK64TRANSMUTE (disabled) Jun 30 12:30:50.084592 [ 3.269146] evm: security.SMACK64MMAP (disabled) Jun 30 12:30:50.084592 [ 3.273741] evm: security.apparmor Jun 30 12:30:50.084592 [ 3.277108] evm: security.ima Jun 30 12:30:50.096566 [ 3.280075] evm: security.capability Jun 30 12:30:50.096566 [ 3.283634] evm: HMAC attrs: 0x1 Jun 30 12:30:50.096566 [ 3.873146] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 12:30:50.684692 [ 3.879095] clk: Disabling unused clocks Jun 30 12:30:50.696542 [ 3.892010] Freeing unused kernel image (initmem) memory: 2048K Jun 30 12:30:50.708588 [ 3.896871] Checked W+X mappings: passed, no W+X pages found Jun 30 12:30:50.708588 [ 3.902131] Run /init as init process Jun 30 12:30:50.720536 Loading, please wait... Jun 30 12:30:50.744522 Starting systemd-udevd version 252.26-1~deb12u2 Jun 30 12:30:50.828523 [ 4.845067] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 12:30:51.668511 [ 4.867069] usbcore: registered new interface driver usbfs Jun 30 12:30:51.680576 [ 4.867970] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 12:30:51.692603 [ 4.871818] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 12:30:51.704556 [ 4.888713] usbcore: registered new interface driver hub Jun 30 12:30:51.704556 [ 4.899186] usbcore: registered new device driver usb Jun 30 12:30:51.716540 [ 4.914728] phy phy-12130000.phy.4: phy_power_on was called before phy_init Jun 30 12:30:51.728566 [ 4.923230] Synopsys Designware Multimedia Card Interface Driver Jun 30 12:30:51.740589 [ 4.930323] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 12:30:51.740589 [ 4.939758] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 30 12:30:51.752566 [ 4.946294] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 30 12:30:51.764593 [ 4.951728] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 30 12:30:51.764593 [ 4.957041] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Jun 30 12:30:51.776742 [ 4.965417] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo Jun 30 12:30:51.788589 [ 4.965705] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 30 12:30:51.788589 [ 4.974611] mmc_host mmc0: card is polling. Jun 30 12:30:51.800540 [ 5.001285] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 12:30:51.824528 [ 5.021058] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Jun 30 12:30:51.836550 [ 5.038085] SCSI subsystem initialized Jun 30 12:30:51.848540 [ 5.047778] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 12:30:51.860582 [ 5.053257] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 12:30:51.872575 [ 5.061010] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 12:30:51.884586 [ 5.067879] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 12:30:51.884586 [ 5.075051] usb usb1: Product: EHCI Host Controller Jun 30 12:30:51.896717 [ 5.079907] usb usb1: Manufacturer: Linux 6.1.0-22-armmp-lpae ehci_hcd Jun 30 12:30:51.896786 [ 5.086409] usb usb1: SerialNumber: 12110000.usb Jun 30 12:30:51.908597 [ 5.091175] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 30 12:30:51.908597 [ 5.097476] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 30 12:30:51.908597 [ 5.103341] hub 1-0:1.0: USB hub found Jun 30 12:30:51.920556 [ 5.147105] hub 1-0:1.0: 3 ports detected Jun 30 12:30:51.956539 [ 5.154805] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 109,32 bit host data width,128 deep fifo Jun 30 12:30:51.968577 [ 5.158185] phy phy-12130000.phy.4: phy_power_on was called before phy_init Jun 30 12:30:51.980599 [ 5.170730] exynos-ohci 12120000.usb: USB Host Controller Jun 30 12:30:51.992574 [ 5.181753] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Jun 30 12:30:52.004528 [ 5.203020] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 30 12:30:52.028585 [ 5.209247] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 12:30:52.028585 [ 5.213252] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Jun 30 12:30:52.040556 [ 5.256845] mmc0: new DDR MMC card at address 0001 Jun 30 12:30:52.076545 [ 5.269604] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Jun 30 12:30:52.088523 [ 5.286345] mmcblk0: p1 p2 p3 p4 Jun 30 12:30:52.100551 [ 5.300829] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Jun 30 12:30:52.124591 [ 5.307702] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 12:30:52.124591 [ 5.314877] usb usb2: Product: USB Host Controller Jun 30 12:30:52.136693 [ 5.319648] usb usb2: Manufacturer: Linux 6.1.0-22-armmp-lpae ohci_hcd Jun 30 12:30:52.136693 [ 5.326146] usb usb2: SerialNumber: 12120000.usb Jun 30 12:30:52.136693 [ 5.343223] hub 2-0:1.0: USB hub found Jun 30 12:30:52.160606 [ 5.344006] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Jun 30 12:30:52.160606 [ 5.345641] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 12:30:52.172545 [ 5.367851] hub 2-0:1.0: 3 ports detected Jun 30 12:30:52.184538 [ 5.387917] mmc1: new high speed SDHC card at address aaaa Jun 30 12:30:52.208570 [ 5.395886] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Jun 30 12:30:52.208570 [ 5.397726] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Jun 30 12:30:52.220534 [ 5.425511] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 30 12:30:52.244540 [ 5.448224] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (241:0) Jun 30 12:30:52.268563 [ 5.459024] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 30 12:30:52.280587 [ 5.467286] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 30 12:30:52.280587 [ 5.482813] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 30 12:30:52.304588 [ 5.488477] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Jun 30 12:30:52.304588 [ 5.497281] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 30 12:30:52.316567 [ 5.528281] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 12:30:52.340576 [ 5.532495] scsi host0: ahci-dwc Jun 30 12:30:52.352590 [ 5.536109] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 111 Jun 30 12:30:52.352590 [ 5.543602] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 12:30:52.364571 [ 5.555871] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Jun 30 12:30:52.376592 [ 5.563896] xhci-hcd xhci-hcd.2.auto: irq 110, io mem 0x12000000 Jun 30 12:30:52.376592 [ 5.570084] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 12:30:52.388584 [ 5.575293] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 12:30:52.388584 [ 5.582967] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 12:30:52.400622 [ 5.589631] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 12:30:52.412592 [ 5.597679] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 12:30:52.412592 [ 5.604870] usb usb3: Product: xHCI Host Controller Jun 30 12:30:52.424594 [ 5.609727] usb usb3: Manufacturer: Linux 6.1.0-22-armmp-lpae xhci-hcd Jun 30 12:30:52.424594 [ 5.616237] usb usb3: SerialNumber: xhci-hcd.2.auto Jun 30 12:30:52.436593 [ 5.621736] hub 3-0:1.0: USB hub found Jun 30 12:30:52.436593 [ 5.624846] hub 3-0:1.0: 1 port detected Jun 30 12:30:52.436593 [ 5.629283] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 12:30:52.448607 [ 5.636937] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Jun 30 12:30:52.460603 [ 5.645066] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 12:30:52.460603 [ 5.652276] usb usb4: Product: xHCI Host Controller Jun 30 12:30:52.472589 [ 5.657126] usb usb4: Manufacturer: Linux 6.1.0-22-armmp-lpae xhci-hcd Jun 30 12:30:52.472589 [ 5.663634] usb usb4: SerialNumber: xhci-hcd.2.auto Jun 30 12:30:52.484568 [ 5.669126] hub 4-0:1.0: USB hub found Jun 30 12:30:52.484568 [ 5.672270] hub 4-0:1.0: 1 port detected Jun 30 12:30:52.484568 [ 5.742508] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 12:30:52.556689 [ 5.810922] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 12:30:52.628569 [ 5.946991] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 12:30:52.760559 [ 6.013233] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 30 12:30:52.832587 [ 6.019539] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 30 12:30:52.832587 [ 6.024790] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 30 12:30:52.844596 [ 6.032215] ata1.00: configured for UDMA/133 Jun 30 12:30:52.844596 [ 6.036653] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 30 12:30:52.856541 [ 6.055506] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 12:30:52.880470 [ 6.159389] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 30 12:30:52.980586 [ 6.165492] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 30 12:30:52.980586 [ 6.170661] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 12:30:52.992597 [ 6.180089] sd 0:0:0:0: [sda] Write Protect is off Jun 30 12:30:52.992597 [ 6.184885] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 30 12:30:53.004593 [ 6.193914] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 30 12:30:53.016518 [ 6.221718] sda: sda1 sda2 < sda5 > Jun 30 12:30:53.037871 [ 6.224536] sd 0:0:0:0: [sda] Attached SCSI disk Jun 30 12:30:53.037871 [ 6.280120] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 12:30:53.100547 [ 6.437655] I/O error, dev mmcblk1, sector 7743713 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 2 Jun 30 12:30:53.256556 [ 6.716073] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 12:30:53.532698 [ 6.790256] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 12:30:53.604580 [ 6.904381] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 12:30:53.724548 [ 7.011985] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 12:30:53.832675 [ 7.119578] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 12:30:53.940736 [ 7.227167] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 12:30:54.048677 [ 7.233229] random: crng init done Jun 30 12:30:54.048734 [ 7.234689] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 12:30:54.060536 [ 7.358240] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. Jun 30 12:30:54.180763 [ 7.369101] device-mapper: uevent: version 1.0.3 Jun 30 12:30:54.180822 [ 7.373821] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Jun 30 12:30:54.192561 Begin: Loading essential drivers ... done. Jun 30 12:30:54.828526 Begin: Running /scripts/init-premount ... done. Jun 30 12:30:57.832520 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 30 12:30:57.844528 Begin: Running /scripts/local-premount ... done. Jun 30 12:30:57.916482 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 30 12:30:57.973709 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 30 12:30:58.069753 /dev/mapper/arndale--metrocentre--vg-root: clean, 39331/1220608 files, 377968/4882432 blocks Jun 30 12:30:58.333705 done. Jun 30 12:30:58.345689 [ 11.667082] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 30 12:30:58.477746 [ 11.896462] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. Jun 30 12:30:58.717703 done. Jun 30 12:30:58.738923 Begin: Running /scripts/local-bottom ... done. Jun 30 12:30:58.765747 Begin: Running /scripts/init-bottom ... done. Jun 30 12:30:58.813590 [ 12.250701] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. Jun 30 12:30:59.068515 INIT: version 3.06 booting Jun 30 12:30:59.440490 INIT: No inittab.d directory found Jun 30 12:30:59.524536 Using makefile-style concurrent boot in runlevel S. Jun 30 12:30:59.812501 Starting hotplug events dispatcher: systemd-udevd. Jun 30 12:31:01.484539 Synthesizing the initial hotplug events (subsystems)...done. Jun 30 12:31:01.736579 Synthesizing the initial hotplug events (devices)...done. Jun 30 12:31:02.300604 Waiting for /dev to be fully populated...[ 15.700231] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 12:31:02.516731 [ 15.707349] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 30 12:31:02.528575 [ 15.815899] panfrost 11800000.gpu: clock rate = 533000000 Jun 30 12:31:02.636553 [ 15.846809] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jun 30 12:31:02.660578 [ 16.093252] usb3503 usb-hub: switched to HUB mode Jun 30 12:31:02.912590 [ 16.096484] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 12:31:02.912590 [ 16.110626] panfrost 11800000.gpu: mali-t600 id 0x600 major 0x0 minor 0x0 status 0x1 Jun 30 12:31:02.924717 [ 16.116949] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,31b4dfff Jun 30 12:31:02.936620 [ 16.125110] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 Jun 30 12:31:02.948629 [ 16.136838] panfrost 11800000.gpu: shader_present=0xf l2_present=0x1 Jun 30 12:31:02.960595 [ 16.144571] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 0 Jun 30 12:31:02.960595 [ 16.161295] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 12:31:02.984566 [ 16.231219] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 12:31:03.056556 [ 16.369847] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 12:31:03.188590 [ 16.417347] usb 1-3: new high-speed USB device number 2 using exynos-ehci Jun 30 12:31:03.236534 [ 16.478316] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 12:31:03.296612 [ 16.577651] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Jun 30 12:31:03.392641 [ 16.584392] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jun 30 12:31:03.404626 [ 16.591794] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 12:31:03.416558 [ 16.615014] hub 1-3:1.0: USB hub found Jun 30 12:31:03.428589 [ 16.617535] hub 1-3:1.0: 3 ports detected Jun 30 12:31:03.428589 [ 16.681006] OF: graph: no port node found in /soc/hdmi@14530000 Jun 30 12:31:03.500561 [ 16.700989] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 12:31:03.524554 [ 16.862556] I/O error, dev mmcblk1, sector 7743713 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 2 Jun 30 12:31:03.680586 [ 16.913368] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Jun 30 12:31:03.728725 [ 16.970819] I/O error, dev mmcblk1, sector 7743714 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 2 Jun 30 12:31:03.788598 [ 17.031416] usb 1-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=77.32 Jun 30 12:31:03.848628 [ 17.038559] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Jun 30 12:31:03.860592 [ 17.045757] usb 1-3.2: Product: USB2.0 Hub Jun 30 12:31:03.860592 [ 17.061757] hub 1-3.2:1.0: USB hub found Jun 30 12:31:03.872581 [ 17.067467] hub 1-3.2:1.0: 4 ports detected Jun 30 12:31:03.884572 [ 17.301323] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 12:31:04.116605 [ 17.377377] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 30 12:31:04.200767 [ 17.393049] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 12:31:04.212592 [ 17.491209] usb 1-3.2.4: New USB device found, idVendor=0b95, idProduct=772a, bcdDevice= 0.01 Jun 30 12:31:04.308628 [ 17.498410] usb 1-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 30 12:31:04.320788 [ 17.505945] usb 1-3.2.4: Product: AX88772 Jun 30 12:31:04.320847 [ 17.510032] usb 1-3.2.4: Manufacturer: ASIX Elec. Corp. Jun 30 12:31:04.332629 [ 17.515201] usb 1-3.2.4: SerialNumber: 000001 Jun 30 12:31:04.332629 [ 17.519593] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 12:31:04.344562 [ 17.628730] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 12:31:04.452553 [ 17.736744] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 12:31:04.560582 [ 17.844875] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 12:31:04.668611 [ 17.852882] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 12:31:04.668611 [ 18.124789] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 30 12:31:04.944691 [ 18.803847] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 12:31:05.620647 [ 18.819521] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Jun 30 12:31:05.644626 [ 18.831406] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 46:54:53:f5:fe:f9 Jun 30 12:31:05.656546 [ 18.847283] usbcore: registered new interface driver asix Jun 30 12:31:05.668554 done. Jun 30 12:31:05.992555 [ 19.655322] EXT4-fs (dm-0): re-mounted. Quota mode: none. Jun 30 12:31:06.476519 Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). Jun 30 12:31:06.512579 Checking file systems.../dev/sda1: clean, 922/61056 files, 25374/243968 blocks Jun 30 12:31:07.824632 done. Jun 30 12:31:07.872517 Cleaning up temporary files... /tmp. Jun 30 12:31:08.205778 [ 21.623157] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 30 12:31:08.433783 [ 21.675081] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Jun 30 12:31:08.493778 [ 21.913397] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k FS Jun 30 12:31:08.733776 Mounting local filesystems...done. Jun 30 12:31:09.057795 Activating swapfile swap, if any...done. Jun 30 12:31:09.057872 Cleaning up temporary files.... Jun 30 12:31:09.105627 Starting Setting kernel variables: sysctl. Jun 30 12:31:09.357771 [ 23.169892] audit: type=1400 audit(1719750671.172:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=898 comm="apparmor_parser" Jun 30 12:31:09.993826 [ 23.188935] audit: type=1400 audit(1719750671.180:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=897 comm="apparmor_parser" Jun 30 12:31:10.005797 [ 23.202502] audit: type=1400 audit(1719750671.188:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=898 comm="apparmor_parser" Jun 30 12:31:10.029716 [ 23.433506] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Jun 30 12:31:10.245752 [ 23.621001] audit: type=1400 audit(1719750671.620:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=940 comm="apparmor_parser" Jun 30 12:31:10.437773 [ 23.640274] audit: type=1400 audit(1719750671.636:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=940 comm="apparmor_parser" Jun 30 12:31:10.461778 [ 23.653753] audit: type=1400 audit(1719750671.640:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=940 comm="apparmor_parser" Jun 30 12:31:10.473810 [ 23.952057] audit: type=1400 audit(1719750671.952:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=936 comm="apparmor_parser" Jun 30 12:31:10.773776 [ 23.968606] audit: type=1400 audit(1719750671.956:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=936 comm="apparmor_parser" Jun 30 12:31:10.797771 [ 23.985865] audit: type=1400 audit(1719750671.960:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=936 comm="apparmor_parser" Jun 30 12:31:10.809777 [ 24.003367] audit: type=1400 audit(1719750671.968:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=936 comm="apparmor_parser" Jun 30 12:31:10.833662 Starting: AppArmorLoading AppArmor profiles...done. Jun 30 12:31:11.169729 . Jun 30 12:31:11.181680 [ 25.574776] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 30 12:31:12.393749 [ 25.580856] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jun 30 12:31:12.393815 Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1 Jun 30 12:31:14.241804 Copyright 2004-2022 Internet Systems Consortium. Jun 30 12:31:14.241870 All rights reserved. Jun 30 12:31:14.241912 For info, please visit https://www.isc.org/software/dhcp/ Jun 30 12:31:14.253755 Jun 30 12:31:14.253805 Listening on LPF/eth0/9e:04:00:59:64:5a Jun 30 12:31:14.253851 Sending on LPF/eth0/9e:04:00:59:64:5a Jun 30 12:31:14.253894 Sending on Socket/fallback Jun 30 12:31:14.265758 Created duid "\000\001\000\001.\024\014\217\236\004\000YdZ". Jun 30 12:31:14.265854 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 Jun 30 12:31:14.265906 [ 28.896559] exynos4-fb 14400000.fimd: deferred probe timeout, ignoring dependency Jun 30 12:31:15.705763 [ 28.907471] exynos-mixer 14450000.mixer: deferred probe timeout, ignoring dependency Jun 30 12:31:15.717756 [ 28.917075] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations Jun 30 12:31:15.729773 [ 28.923487] exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm]) Jun 30 12:31:15.741737 [ 28.932006] exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm]) Jun 30 12:31:15.741798 [ 28.941830] exynos-drm exynos-drm: bound 14500000.dsi (ops hdmi_enable [exynosdrm]) Jun 30 12:31:15.753735 [ 28.948651] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm]) Jun 30 12:31:15.765729 [ 28.957729] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Jun 30 12:31:15.765791 [ 28.964191] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Jun 30 12:31:15.777719 [ 28.978194] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 Jun 30 12:31:15.789733 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 Jun 30 12:31:16.113750 DHCPOFFER of 10.149.64.44 from 10.149.64.4 Jun 30 12:31:16.113811 DHCPREQUEST for 10.149.64.44 on eth0 to 255.255.255.255 port 67 Jun 30 12:31:16.125762 DHCPACK of 10.149.64.44 from 10.149.64.4 Jun 30 12:31:16.125820 bound to 10.149.64.44 -- renewal in 254 seconds. Jun 30 12:31:16.125867 done. Jun 30 12:31:16.125905 Cleaning up temporary files.... Jun 30 12:31:16.173697 Starting nftables: none Jun 30 12:31:16.281706 . Jun 30 12:31:16.653695 INIT: Entering runlevel: 2 Jun 30 12:31:16.725685 Using makefile-style concurrent boot in runlevel 2. Jun 30 12:31:16.785682 Starting Apache httpd web server: apache2. Jun 30 12:31:18.909711 Starting periodic command scheduler: cron. Jun 30 12:31:19.329727 Starting NTP server: ntpd2024-06-30T12:31:20 ntpd[1136]: INIT: ntpd ntpsec-1.2.2: Starting Jun 30 12:31:19.401765 2024-06-30T12:31:20 ntpd[1136]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 30 12:31:19.413710 . Jun 30 12:31:19.413763 Starting system message bus: dbus. Jun 30 12:31:19.809598 Starting OpenBSD Secure Shell server: sshd. Jun 30 12:31:20.301706 Jun 30 12:31:21.349759 Debian GNU/Linux 12 arndale-metrocentre ttySAC2 Jun 30 12:31:21.349829 Jun 30 12:31:21.349866 arndale-metrocentre login: INIT: Switching to r INIT: No initUsing makefile-style concurrent boot in runlevel 6. Jun 30 12:36:25.812772 Stopping SMP IRQ Balancer: irqbalance. Jun 30 12:36:25.884702 Stopping hotplug events dispatcher: systemd-udevd. Jun 30 12:36:25.896743 Stopping nftables: none. Jun 30 12:36:25.908596 Saving the system clock to /dev/rtc0. Jun 30 12:36:26.964795 Hardware Clock updated to Sun Jun 30 12:36:28 UTC 2024. Jun 30 12:36:26.976563 Stopping Apache httpd web server: apache2. Jun 30 12:36:27.036540 Asking all remaining processes to terminate...done. Jun 30 12:36:27.604701 All processes ended within 1 seconds...done. Jun 30 12:36:27.604754 Deconfiguring network interfaces...ifdown: ignoring unknown interface eth0=eth0 Jun 30 12:36:27.700576 done. Jun 30 12:36:27.700576 [ 341.106610] EXT4-fs (sda1): unmounting filesystem. Jun 30 12:36:27.916555 Deactivating swap...done. Jun 30 12:36:27.988555 Unmounting local filesystems...done. Jun 30 12:36:27.988555 [ 341.438145] EXT4-fs (dm-0): re-mounted. Quota mode: none. Jun 30 12:36:28.252546 Will now restart. Jun 30 12:36:28.532522 [ 341.759957] asix 1-3.2.4:1.0 eth0: Link is Down Jun 30 12:36:28.568511 [ 341.806985] sd 0:0:0:0: [sda] Synchronizing SCSI cache Jun 30 12:36:28.616506 [ 341.834958] wake enabled for irq 101 (gpx1-4) Jun 30 12:36:28.652495 [ 341.837876] wake enabled for irq 102 (gpx1-5) Jun 30 12:36:28.652495 [ 341.842202] wake enabled for irq 103 (gpx1-6) Jun 30 12:36:28.652495 [ 341.846540] wake enabled for irq 104 (gpx1-7) Jun 30 12:36:28.664517 [ 341.850887] wake enabled for irq 105 (gpx2-0) Jun 30 12:36:28.664517 [ 341.855222] wake enabled for irq 106 (gpx2-1) Jun 30 12:36:28.664517 [ 341.860039] reboot: Re˙ Jun 30 12:36:29.004550 Jun 30 12:36:29.004550 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 12:36:29.016600 Jun 30 12:36:29.016600 CPU: Exynos5250@1000MHz Jun 30 12:36:29.016600 Jun 30 12:36:29.016600 Board: Arndale Jun 30 12:36:29.016600 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 12:36:29.016600 ready Jun 30 12:36:29.016600 DRAM: 2 GiB Jun 30 12:36:29.028514 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 12:36:29.040632 trace: enabled Jun 30 12:36:29.076599 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 12:36:29.436641 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 12:36:29.496558 In: serial Jun 30 12:36:29.496558 Out: serial Jun 30 12:36:29.496558 Err: serial Jun 30 12:36:29.496558 SCSI: ARNDALE SCSI INIT Jun 30 12:36:29.496558 Target spinup took 0 ms. Jun 30 12:36:29.508584 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 12:36:29.508584 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 12:36:29.520605 Net: Net Initialization Skipped Jun 30 12:36:29.520605 No ethernet found. Jun 30 12:36:29.520605 Hostname: arndale-metrocentre Jun 30 12:36:29.520605 Hit any key to stop autoboot: 2  1  0 Jun 30 12:36:31.445719 (Re)start USB... Jun 30 12:36:31.445784 USB0: USB EHCI 1.00 Jun 30 12:36:31.457684 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 12:36:37.052759 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 12:36:37.076187 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 12:36:37.504594 Waiting for Ethernet connection... done. Jun 30 12:36:39.144526 BOOTP broadcast 1 Jun 30 12:36:39.144561 BOOTP broadcast 2 Jun 30 12:36:41.601844 DHCP client bound to address 10.149.64.44 (2559 ms) Jun 30 12:36:41.601917 Using asx0 device Jun 30 12:36:41.601959 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 12:36:41.613768 Filename 'pxelinux.0'. Jun 30 12:36:41.613864 Load address: 0x43e00000 Jun 30 12:36:41.613910 Loading: *### Jun 30 12:36:41.640754 2.2 MiB/s Jun 30 12:36:41.640831 done Jun 30 12:36:41.640870 Bytes transferred = 42430 (a5be hex) Jun 30 12:36:41.640914 missing environment variable: pxeuuid Jun 30 12:36:41.640957 Retrieving file: pxelinux.cfg/0A95402C Jun 30 12:36:41.652598 Using asx0 device Jun 30 12:36:41.652598 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 12:36:41.652598 Filename 'pxelinux.cfg/0A95402C'. Jun 30 12:36:41.652598 Load address: 0x51000000 Jun 30 12:36:41.664600 Loading: *# Jun 30 12:36:41.664600 31.3 KiB/s Jun 30 12:36:41.664600 done Jun 30 12:36:41.664600 Bytes transferred = 65 (41 hex) Jun 30 12:36:41.664600 Config file found Jun 30 12:36:41.664600 Ignoring unknown command: serial Jun 30 12:36:41.676545 1: local Jun 30 12:36:41.676545 scanning bus for devices... Jun 30 12:36:41.676545 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 12:36:41.700601 Type: Hard Disk Jun 30 12:36:41.700601 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 12:36:41.712602 Found 1 device(s). Jun 30 12:36:41.712602 Jun 30 12:36:41.712602 SCSI device 0: Jun 30 12:36:41.712602 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 12:36:41.712602 Type: Hard Disk Jun 30 12:36:41.724598 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 12:36:41.724598 ... is now current device Jun 30 12:36:41.724598 Scanning scsi 0... Jun 30 12:36:41.724598 Found U-Boot script /boot.scr Jun 30 12:36:41.904694 1768 bytes read in 37 ms (45.9 KiB/s) Jun 30 12:36:41.952585 ## Executing script at 50000000 Jun 30 12:36:41.952585 Loading dtbs/6.10.0-rc5+/exynos5250-arndale.dtb Jun 30 12:36:41.964531 46641 bytes read in 1746 ms (25.4 KiB/s) Jun 30 12:36:43.652453 983052 bytes read in 106 ms (8.8 MiB/s) Jun 30 12:36:43.769674 Loaded xen-4.19-unstable to 0x41000000 (f000c) Jun 30 12:36:43.781712 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan Jun 30 12:36:43.793640 10785280 bytes read in 508 ms (20.2 MiB/s) Jun 30 12:36:44.297687 Loaded vmlinuz-6.10.0-rc5+ to 0x42000000 (a49200) Jun 30 12:36:44.297744 command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 12:36:44.321661 12142412 bytes read in 764 ms (15.2 MiB/s) Jun 30 12:36:45.077689 Loaded initrd.img-6.10.0-rc5+ to 0x43300000 (b9474c) Jun 30 12:36:45.077757 chosen { Jun 30 12:36:45.077796 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan"; Jun 30 12:36:45.089721 #size-cells = <0x00000001>; Jun 30 12:36:45.089750 #address-cells = <0x00000001>; Jun 30 12:36:45.101707 stdout-path = "serial2:115200n8"; Jun 30 12:36:45.101739 module@1 { Jun 30 12:36:45.101761 reg = <0x43300000 0x00b9474c>; Jun 30 12:36:45.101784 compatible = "xen,linux-initrd", "xen,multiboot-module"; Jun 30 12:36:45.113711 }; Jun 30 12:36:45.113739 module@0 { Jun 30 12:36:45.113761 bootargs = "ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Jun 30 12:36:45.125732 reg = <0x42000000 0x00a49200>; Jun 30 12:36:45.125762 compatible = "xen,linux-zimage", "xen,multiboot-module"; Jun 30 12:36:45.137710 }; Jun 30 12:36:45.137761 }; Jun 30 12:36:45.137799 Booting 0x41000000 - 0x43000000 Jun 30 12:36:45.137841 Kernel image @ 0x41000000 [ 0x000000 - 0x12f000 ] Jun 30 12:36:45.149702 ## Flattened Device Tree blob at 43000000 Jun 30 12:36:45.149754 Booting using the fdt blob at 0x43000000 Jun 30 12:36:45.149799 reserving fdt memory region: addr=43000000 size=c000 Jun 30 12:36:45.161688 Loading Device Tree to 4fff1000, end 4fffffff ... OK Jun 30 12:36:45.161745 Jun 30 12:36:45.161814 Starting kernel ...(fake run for tracing) Jun 30 12:36:45.173662 Jun 30 12:36:45.173713 Jun 30 12:36:45.173751 Starting kernel ... Jun 30 12:36:45.173792 Jun 30 12:36:45.173828 __ __ _ _ _ ___ _ _ _ Jun 30 12:36:45.221696 \ \/ /___ _ __ | || | / |/ _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Jun 30 12:36:45.233707 \ // _ \ '_ \ | || |_ | | (_) |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Jun 30 12:36:45.233761 / \ __/ | | | |__ _|| |\__, |__| |_| | | | \__ \ || (_| | |_) | | __/ Jun 30 12:36:45.245712 /_/\_\___|_| |_| |_|(_)_| /_/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Jun 30 12:36:45.245772 Jun 30 12:36:45.245809 (XEN) Xen version 4.19-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Sun Jun 30 09:16:28 UTC 2024 Jun 30 12:36:45.257716 (XEN) Latest ChangeSet: Wed Jun 26 16:07:30 2024 +0100 git:08f9b1dd9c Jun 30 12:36:45.269709 (XEN) build-id: 49321b95d54bf04a04497dcfff6064128f8c8a55 Jun 30 12:36:45.269769 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Jun 30 12:36:45.281711 (XEN) 32-bit Execution: Jun 30 12:36:45.281767 (XEN) Processor Features: 00001031:00011011 Jun 30 12:36:45.281813 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Jun 30 12:36:45.293708 (XEN) Extensions: GenericTimer Security Jun 30 12:36:45.293764 (XEN) Debug Features: 02010555 Jun 30 12:36:45.305701 (XEN) Auxiliary Features: 00000000 Jun 30 12:36:45.305757 (XEN) Memory Model Features: 10201105 20000000 Jun 30 12:36:45.305803 (XEN) 01240000 02102211 Jun 30 12:36:45.317706 (XEN) ISA Features: 02101110 13112111 21232041 Jun 30 12:36:45.317739 (XEN) 11112131 10011142 00000000 Jun 30 12:36:45.317763 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Jun 30 12:36:45.329709 (XEN) Set SYSRAM to 0000000041000074 (00200074) Jun 30 12:36:45.329740 (XEN) SMP: Allowing 2 CPUs Jun 30 12:36:45.341715 (XEN) enabled workaround for: ARM erratum 766422 Jun 30 12:36:45.341776 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Jun 30 12:36:45.353701 (XEN) GICv2 initialization: Jun 30 12:36:45.353731 (XEN) gic_dist_addr=0000000010481000 Jun 30 12:36:45.353756 (XEN) gic_cpu_addr=0000000010482000 Jun 30 12:36:45.353780 (XEN) gic_hyp_addr=0000000010484000 Jun 30 12:36:45.365705 (XEN) gic_vcpu_addr=0000000010486000 Jun 30 12:36:45.365736 (XEN) gic_maintenance_irq=25 Jun 30 12:36:45.365760 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Jun 30 12:36:45.377706 (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2) Jun 30 12:36:45.377739 (XEN) Initializing Credit2 scheduler Jun 30 12:36:45.377763 (XEN) load_precision_shift: 18 Jun 30 12:36:45.389708 (XEN) load_window_shift: 30 Jun 30 12:36:45.389739 (XEN) underload_balance_tolerance: 0 Jun 30 12:36:45.389763 (XEN) overload_balance_tolerance: -3 Jun 30 12:36:45.389785 (XEN) runqueues arrangement: socket Jun 30 12:36:45.401711 (XEN) cap enforcement granularity: 10ms Jun 30 12:36:45.401743 (XEN) load tracking window length 1073741824 ns Jun 30 12:36:45.401768 (XEN) Allocated console ring of 16 KiB. Jun 30 12:36:45.413706 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Jun 30 12:36:45.413740 (XEN) CPU0: Guest atomics will try 1 times before pausing the domain Jun 30 12:36:45.425712 (XEN) Bringing up CPU1 Jun 30 12:36:45.425742 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Jun 30 12:36:45.425768 (XEN) Brought up 2 CPUs Jun 30 12:36:45.437726 (XEN) CPU 1 booted. Jun 30 12:36:45.437764 (XEN) I/O virtualisation disabled Jun 30 12:36:45.437790 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Jun 30 12:36:45.437815 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Jun 30 12:36:45.449706 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Jun 30 12:36:45.449739 (XEN) Initializing Credit2 scheduler Jun 30 12:36:45.449774 (XEN) load_precision_shift: 18 Jun 30 12:36:45.461710 (XEN) load_window_shift: 30 Jun 30 12:36:45.461740 (XEN) underload_balance_tolerance: 0 Jun 30 12:36:45.461764 (XEN) overload_balance_tolerance: -3 Jun 30 12:36:45.473701 (XEN) runqueues arrangement: socket Jun 30 12:36:45.473733 (XEN) cap enforcement granularity: 10ms Jun 30 12:36:45.473758 (XEN) load tracking window length 1073741824 ns Jun 30 12:36:45.473782 (XEN) Adding cpu 0 to runqueue 0 Jun 30 12:36:45.485707 (XEN) First cpu on runqueue, activating Jun 30 12:36:45.485738 (XEN) Adding cpu 1 to runqueue 0 Jun 30 12:36:45.485762 (XEN) alternatives: Patching with alt table 002c2f84 -> 002c305c Jun 30 12:36:45.497705 (XEN) CPU0 will execute ICIALLU on guest exit Jun 30 12:36:45.497737 (XEN) CPU1 will execute ICIALLU on guest exit Jun 30 12:36:45.497761 (XEN) *** LOADING DOMAIN 0 *** Jun 30 12:36:45.509693 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Jun 30 12:36:45.509726 (XEN) Loading ramdisk from boot module @ 0000000043300000 Jun 30 12:36:45.521645 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Jun 30 12:36:45.521698 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Jun 30 12:36:46.085747 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Jun 30 12:36:46.085813 (XEN) Allocating PPI 16 for event channel interrupt Jun 30 12:36:46.121755 (XEN) d0: extended regions not supported for 32-bit guests Jun 30 12:36:46.121799 (XEN) Loading zImage from 0000000042000000 to 0000000067400000-0000000067e49200 Jun 30 12:36:46.133674 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d9474c Jun 30 12:36:46.229700 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b499 Jun 30 12:36:46.325697 (XEN) Initial low memory virq threshold set at 0x4000 pages. Jun 30 12:36:46.337715 (XEN) Scrubbing Free RAM in background Jun 30 12:36:46.337756 (XEN) Std. Loglevel: All Jun 30 12:36:46.337789 (XEN) Guest Loglevel: All Jun 30 12:36:46.337821 (XEN) *************************************************** Jun 30 12:36:46.349712 (XEN) WARNING: SILO mode is not enabled. Jun 30 12:36:46.349754 (XEN) It has implications on the security of the system, Jun 30 12:36:46.361707 (XEN) unless the communications have been forbidden between Jun 30 12:36:46.361750 (XEN) untrusted domains. Jun 30 12:36:46.361786 (XEN) *************************************************** Jun 30 12:36:46.373608 (XEN) 3... 2... 1... Jun 30 12:36:49.373760 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 30 12:36:49.373836 (XEN) Freed 352kB init memory. Jun 30 12:36:49.385694 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 12:36:50.513700 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Jun 30 12:36:50.525763 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Jun 30 12:36:50.537769 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Jun 30 12:36:50.537830 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Jun 30 12:36:50.549750 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 12:36:50.549812 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 12:36:50.597767 [ 0.000000] Linux version 6.10.0-rc5+ (osstest@himrod1) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Sun Jun 30 08:10:22 UTC 2024 Jun 30 12:36:50.609774 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 30 12:36:50.621766 [ 0.000000] CPU: div instructions available: patching division code Jun 30 12:36:50.621829 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 12:36:50.633765 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 12:36:50.633834 [ 0.000000] Memory policy: Data cache writealloc Jun 30 12:36:50.645768 [ 0.000000] Xen 4.19 support found Jun 30 12:36:50.645824 [ 0.000000] efi: UEFI not found. Jun 30 12:36:50.645893 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 on node -1 Jun 30 12:36:50.657765 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 12:36:50.657823 [ 0.000000] Zone ranges: Jun 30 12:36:50.657865 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Jun 30 12:36:50.669761 [ 0.000000] Normal empty Jun 30 12:36:50.669817 [ 0.000000] HighMem empty Jun 30 12:36:50.669859 [ 0.000000] Movable zone start for each node Jun 30 12:36:50.681774 [ 0.000000] Early memory node ranges Jun 30 12:36:50.681831 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Jun 30 12:36:50.697784 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Jun 30 12:36:50.697848 [ 0.000000] psci: probing for conduit method from DT. Jun 30 12:36:50.697896 [ 0.000000] psci: PSCIv1.1 detected in firmware. Jun 30 12:36:50.709742 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Jun 30 12:36:50.709803 [ 0.000000] psci: Trusted OS migration not required Jun 30 12:36:50.709850 [ 0.000000] psci: SMC Calling Convention v1.2 Jun 30 12:36:50.721765 [ 0.000000] percpu: Embedded 18 pages/cpu s41428 r8192 d24108 u73728 Jun 30 12:36:50.721828 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 12:36:50.745767 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 12:36:50.757755 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Jun 30 12:36:50.757824 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 131072 Jun 30 12:36:50.769754 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Jun 30 12:36:50.769817 [ 0.000000] Memory: 414600K/524288K available (15360K kernel code, 2268K rwdata, 6084K rodata, 2048K init, 439K bss, 44152K reserved, 65536K cma-reserved, 0K highmem) Jun 30 12:36:50.793754 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 12:36:50.793818 [ 0.000000] trace event string verifier disabled Jun 30 12:36:50.793864 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 12:36:50.805771 [ 0.000000] rcu: RCU event tracing is enabled. Jun 30 12:36:50.805830 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Jun 30 12:36:50.817862 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Jun 30 12:36:50.817934 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 12:36:50.829762 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 12:36:50.829823 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 12:36:50.841769 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 12:36:50.853765 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Jun 30 12:36:50.853827 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 12:36:50.865783 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 12:36:50.877765 [ 0.000013] Switching to timer-based delay loop, resolution 41ns Jun 30 12:36:50.877826 [ 0.000516] Console: colour dummy device 80x30 Jun 30 12:36:50.889765 [ 0.000535] printk: legacy console [hvc0] enabled Jun 30 12:36:50.889825 [ 0.299531] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Jun 30 12:36:50.901778 [ 0.309930] CPU: Testing write buffer coherency: ok Jun 30 12:36:50.901837 [ 0.314871] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 12:36:50.913783 [ 0.324425] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 12:36:50.925775 [ 0.330857] pid_max: default: 32768 minimum: 301 Jun 30 12:36:50.925837 [ 0.335626] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 12:36:50.937794 [ 0.342906] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 12:36:50.937862 [ 0.351325] /cpus/cpu@0 missing clock-frequency property Jun 30 12:36:50.949767 [ 0.356109] /cpus/cpu@1 missing clock-frequency property Jun 30 12:36:50.949828 [ 0.361526] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 12:36:50.961772 [ 0.368223] xen:grant_table: Grant tables using version 1 layout Jun 30 12:36:50.961835 [ 0.373357] Grant table initialized Jun 30 12:36:50.961879 [ 0.376914] xen:events: Using FIFO-based ABI Jun 30 12:36:50.973765 [ 0.381211] Xen: initializing cpu0 Jun 30 12:36:50.973822 [ 0.384735] Setting up static identity map for 0x60300000 - 0x603000ac Jun 30 12:36:50.985756 [ 0.392524] rcu: Hierarchical SRCU implementation. Jun 30 12:36:50.985817 [ 0.396130] rcu: Max phase no-delay instances is 1000. Jun 30 12:36:50.985865 [ 0.404365] EFI services will not be available. Jun 30 12:36:50.997754 [ 0.407689] smp: Bringing up secondary CPUs ... Jun 30 12:36:50.997787 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 12:36:51.069774 [ 0.481946] Xen: initializing cpu1 Jun 30 12:36:51.069837 [ 0.482106] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 12:36:51.081769 [ 0.482130] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 12:36:51.093822 [ 0.501102] smp: Brought up 1 node, 2 CPUs Jun 30 12:36:51.093880 [ 0.504760] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 12:36:51.105740 [ 0.511046] CPU: All CPU(s) started in SVC mode. Jun 30 12:36:51.105800 [ 0.516965] devtmpfs: initialized Jun 30 12:36:51.105843 [ 0.529335] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 12:36:51.129773 [ 0.535889] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Jun 30 12:36:51.129845 [ 0.545562] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 12:36:51.141804 [ 0.553459] pinctrl core: initialized pinctrl subsystem Jun 30 12:36:51.141864 [ 0.560078] DMI not present or invalid. Jun 30 12:36:51.153777 [ 0.563590] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 12:36:51.153839 [ 0.570206] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 12:36:51.165760 [ 0.579534] thermal_sys: Registered thermal governor 'step_wise' Jun 30 12:36:51.177754 [ 0.579692] software IO TLB: area num 2. Jun 30 12:36:51.177813 [ 0.588365] software IO TLB: only able to allocate 8 MB Jun 30 12:36:51.177861 [ 0.595436] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Jun 30 12:36:51.189764 [ 0.600641] No ATAGs? Jun 30 12:36:51.189818 [ 0.602942] hw-breakpoint: Failed to enable monitor mode on CPU 0. Jun 30 12:36:51.201744 [ 0.611644] Serial: AMBA PL011 UART driver Jun 30 12:36:51.201803 [ 0.658267] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 65 Jun 30 12:36:51.249766 [ 0.686701] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 30 12:36:51.285722 [ 0.710632] xen:balloon: Initialising balloon driver Jun 30 12:36:51.309718 [ 0.717081] iommu: Default domain type: Translated Jun 30 12:36:51.309752 [ 0.720492] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 12:36:51.321741 [ 0.729276] SCSI subsystem initialized Jun 30 12:36:51.321799 [ 0.732036] usbcore: registered new interface driver usbfs Jun 30 12:36:51.321847 [ 0.737273] usbcore: registered new interface driver hub Jun 30 12:36:51.333741 [ 0.742611] usbcore: registered new device driver usb Jun 30 12:36:51.333774 [ 0.749333] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 12:36:51.345796 [ 0.752924] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 12:36:51.345859 [ 0.759179] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 12:36:51.357745 [ 0.764243] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 12:36:51.357806 [ 0.769175] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 12:36:51.369735 [ 0.775215] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 12:36:51.369768 [ 0.780986] pps_core: LinuxPPS API ver. 1 registered Jun 30 12:36:51.369794 [ 0.785383] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 12:36:51.381788 [ 0.794610] PTP clock support registered Jun 30 12:36:51.393735 [ 0.798845] EDAC MC: Ver: 3.0.0 Jun 30 12:36:51.393793 [ 0.802102] scmi_core: SCMI protocol bus registered Jun 30 12:36:51.393840 [ 0.808793] vgaarb: loaded Jun 30 12:36:51.393882 [ 0.812050] clocksource: Switched to clocksource arch_sys_counter Jun 30 12:36:51.405786 [ 0.829143] NET: Registered PF_INET protocol family Jun 30 12:36:51.417717 [ 0.832798] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Jun 30 12:36:51.429662 [ 0.840681] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 12:36:51.441745 [ 0.848402] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 12:36:51.441812 [ 0.856186] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Jun 30 12:36:51.453721 [ 0.864021] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Jun 30 12:36:51.465763 [ 0.871297] TCP: Hash tables configured (established 4096 bind 4096) Jun 30 12:36:51.465827 [ 0.877670] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 12:36:51.477768 [ 0.884241] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 12:36:51.477832 [ 0.891332] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 12:36:51.489737 [ 0.897499] RPC: Registered named UNIX socket transport module. Jun 30 12:36:51.489799 [ 0.902974] RPC: Registered udp transport module. Jun 30 12:36:51.501763 [ 0.907728] RPC: Registered tcp transport module. Jun 30 12:36:51.501795 [ 0.912525] RPC: Registered tcp-with-tls transport module. Jun 30 12:36:51.501821 [ 0.918078] RPC: Registered tcp NFSv4.1 backchannel transport module. Jun 30 12:36:51.513771 [ 0.924589] PCI: CLS 0 bytes, default 64 Jun 30 12:36:51.513829 [ 0.929989] Initialise system trusted keyrings Jun 30 12:36:51.525766 [ 0.933323] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Jun 30 12:36:51.525819 [ 0.939829] squashfs: version 4.0 (2009/01/31) Phillip Lougher Jun 30 12:36:51.537793 [ 0.945713] NFS: Registering the id_resolver key type Jun 30 12:36:51.537854 [ 0.950635] Key type id_resolver registered Jun 30 12:36:51.549767 [ 0.954875] Key type id_legacy registered Jun 30 12:36:51.549799 [ 0.958979] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Jun 30 12:36:51.549828 [ 0.965736] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Jun 30 12:36:51.561761 [ 0.973448] Trying to unpack rootfs image as initramfs... Jun 30 12:36:51.573644 [ 0.994836] Key type asymmetric registered Jun 30 12:36:51.585714 [ 0.997573] Asymmetric key parser 'x509' registered Jun 30 12:36:51.597752 [ 1.002640] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) Jun 30 12:36:51.597820 [ 1.009987] io scheduler mq-deadline registered Jun 30 12:36:51.609715 [ 1.014608] io scheduler kyber registered Jun 30 12:36:51.609774 [ 1.018716] io scheduler bfq registered Jun 30 12:36:51.609819 [ 1.159826] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 12:36:51.753793 [ 1.166063] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 12:36:51.765734 [ 1.205975] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 12:36:51.801797 [ 1.212215] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 12:36:51.813702 [ 1.254721] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 12:36:51.849793 [ 1.260934] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 12:36:51.861719 [ 1.311936] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 12:36:51.909772 [ 1.318191] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 12:36:51.921738 [ 1.330900] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 12:36:51.933699 [ 1.411756] xen:xen_evtchn: Event-channel device installed Jun 30 12:36:52.005740 [ 1.435327] Freeing initrd memory: 11860K Jun 30 12:36:52.029717 [ 1.489641] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 12:36:52.089727 [ 1.500644] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 12:36:52.101774 [ 1.508855] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 12:36:52.101844 [ 1.517746] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 12:36:52.113768 [ 1.526731] SuperH (H)SCI(F) driver initialized Jun 30 12:36:52.125753 [ 1.531037] STMicroelectronics ASC driver initialized Jun 30 12:36:52.125814 [ 1.535945] STM32 USART driver initialized Jun 30 12:36:52.125859 [ 1.541302] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 12:36:52.137637 [ 1.552209] random: crng init done Jun 30 12:36:52.149664 [ 1.556653] brd: module loaded Jun 30 12:36:52.149715 [ 1.562584] loop: module loaded Jun 30 12:36:52.149758 [ 1.578199] Invalid max_queues (4), will use default max: 2. Jun 30 12:36:52.173713 [ 1.596815] tun: Universal TUN/TAP device driver, 1.6 Jun 30 12:36:52.185735 [ 1.600675] CAN device driver interface Jun 30 12:36:52.197735 [ 1.605847] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Jun 30 12:36:52.197797 [ 1.616975] xen_netfront: Initialising Xen virtual ethernet driver Jun 30 12:36:52.209767 [ 1.621831] pegasus: Pegasus/Pegasus II USB Ethernet driver Jun 30 12:36:52.221756 [ 1.627460] usbcore: registered new interface driver pegasus Jun 30 12:36:52.221818 [ 1.633182] usbcore: registered new interface driver asix Jun 30 12:36:52.233760 [ 1.638655] usbcore: registered new interface driver ax88179_178a Jun 30 12:36:52.233822 [ 1.644817] usbcore: registered new interface driver cdc_ether Jun 30 12:36:52.245755 [ 1.650705] usbcore: registered new interface driver smsc75xx Jun 30 12:36:52.245817 [ 1.656530] usbcore: registered new interface driver smsc95xx Jun 30 12:36:52.257757 [ 1.662346] usbcore: registered new interface driver net1080 Jun 30 12:36:52.257819 [ 1.668066] usbcore: registered new interface driver cdc_subset Jun 30 12:36:52.257868 [ 1.674064] usbcore: registered new interface driver zaurus Jun 30 12:36:52.269761 [ 1.679696] usbcore: registered new interface driver cdc_ncm Jun 30 12:36:52.269822 [ 1.689094] usbcore: registered new interface driver usb-storage Jun 30 12:36:52.281735 [ 1.699612] i2c_dev: i2c /dev entries driver Jun 30 12:36:52.293716 [ 1.717928] device-mapper: uevent: version 1.0.3 Jun 30 12:36:52.305717 [ 1.721351] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev Jun 30 12:36:52.317771 [ 1.730953] cpu cpu0: OPP table can't be empty Jun 30 12:36:52.329762 [ 1.735698] failed to register cpuidle driver Jun 30 12:36:52.329822 [ 1.739058] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Jun 30 12:36:52.329873 [ 1.747399] sdhci: Secure Digital Host Controller Interface driver Jun 30 12:36:52.341746 [ 1.752454] sdhci: Copyright(c) Pierre Ossman Jun 30 12:36:52.341825 [ 1.760499] sdhci-pltfm: SDHCI platform and OF driver helper Jun 30 12:36:52.353702 [ 1.772525] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 12:36:52.365777 [ 1.777956] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Jun 30 12:36:52.377747 [ 1.784661] usbcore: registered new interface driver usbhid Jun 30 12:36:52.377808 [ 1.789323] usbhid: USB HID core driver Jun 30 12:36:52.377853 [ 1.800220] NET: Registered PF_INET6 protocol family Jun 30 12:36:52.389744 [ 1.804561] Segment Routing with IPv6 Jun 30 12:36:52.401760 [ 1.807567] In-situ OAM (IOAM) with IPv6 Jun 30 12:36:52.401818 [ 1.811610] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Jun 30 12:36:52.401867 [ 1.818085] NET: Registered PF_PACKET protocol family Jun 30 12:36:52.413773 [ 1.822752] can: controller area network core Jun 30 12:36:52.413832 [ 1.827107] NET: Registered PF_CAN protocol family Jun 30 12:36:52.425757 [ 1.831934] can: raw protocol Jun 30 12:36:52.425813 [ 1.835009] can: broadcast manager protocol Jun 30 12:36:52.425859 [ 1.839250] can: netlink gateway - max_hops=1 Jun 30 12:36:52.437769 [ 1.844021] Key type dns_resolver registered Jun 30 12:36:52.437828 [ 1.848678] ThumbEE CPU extension supported. Jun 30 12:36:52.437874 [ 1.852383] Registering SWP/SWPB emulation handler Jun 30 12:36:52.449713 [ 1.866762] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level Jun 30 12:36:52.461787 [ 1.873670] Loading compiled-in X.509 certificates Jun 30 12:36:52.473685 [ 1.916823] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 12:36:52.509772 [ 1.920420] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 12:36:52.521749 [ 1.927391] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 12:36:52.521823 [ 1.935227] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 12:36:52.533740 [ 1.976625] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 12:36:52.569730 [ 1.985478] s5m-rtc s5m-rtc: setting system clock to 2024-06-30T12:36:54 UTC (1719751014) Jun 30 12:36:52.581726 [ 1.996602] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 12:36:52.593766 [ 2.001213] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 12:36:52.593826 [ 2.005648] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 12:36:52.605680 [ 2.012417] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 12:36:52.605713 [ 2.018200] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 12:36:52.617627 [ 2.024494] clk: Not disabling unused clocks Jun 30 12:36:52.617656 [ 2.027886] PM: genpd: Disabling unused power domains Jun 30 12:36:52.617681 [ 2.036433] Freeing unused kernel image (initmem) memory: 2048K Jun 30 12:36:52.629708 [ 2.042784] Run /init as init process Jun 30 12:36:52.629759 Loading, please wait... Jun 30 12:36:52.665592 Starting systemd-udevd version 252.26-1~deb12u2 Jun 30 12:36:52.725729 [ 3.254693] i2c-gpio i2c-10: using lines 552 (SDA) and 553 (SCL) Jun 30 12:36:53.853703 [ 3.399644] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 12:36:53.997657 [ 3.412259] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 12:36:54.009619 [ 3.442562] phy phy-12130000.phy.6: phy_power_on was called before phy_init Jun 30 12:36:54.033646 [ 3.448163] exynos-ohci 12120000.usb: USB Host Controller Jun 30 12:36:54.045661 [ 3.453719] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Jun 30 12:36:54.045699 [ 3.480234] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 Jun 30 12:36:54.073659 [ 3.485835] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 12:36:54.085609 [ 3.514933] phy phy-12130000.phy.6: phy_power_on was called before phy_init Jun 30 12:36:54.109665 [ 3.520965] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 12:36:54.121775 [ 3.526449] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Jun 30 12:36:54.121846 [ 3.570114] hub 1-0:1.0: USB hub found Jun 30 12:36:54.157729 [ 3.572568] hub 1-0:1.0: 3 ports detected Jun 30 12:36:54.169708 [ 3.586917] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 Jun 30 12:36:54.181728 [ 3.610390] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 30 12:36:54.205759 [ 3.622273] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 30 12:36:54.217743 [ 3.630242] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 30 12:36:54.229734 [ 3.645412] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 12:36:54.241759 [ 3.652755] hub 2-0:1.0: USB hub found Jun 30 12:36:54.241817 [ 3.655187] hub 2-0:1.0: 3 ports detected Jun 30 12:36:54.253739 [ 3.662625] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 30 12:36:54.253804 [ 3.668315] ahci-dwc 122f0000.sata: AHCI vers 0001.0300, 32 command slots, 6 Gbps, platform mode Jun 30 12:36:54.265774 [ 3.677202] ahci-dwc 122f0000.sata: 1/1 ports implemented (port mask 0x1) Jun 30 12:36:54.277778 [ 3.684041] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 30 12:36:54.277850 [ 3.692155] Synopsys Designware Multimedia Card Interface Driver Jun 30 12:36:54.289763 [ 3.702720] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 30 12:36:54.301695 [ 3.721766] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 30 12:36:54.313732 [ 3.747652] scsi host0: ahci-dwc Jun 30 12:36:54.337628 [ 3.750078] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 30 12:36:54.349708 [ 3.750483] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 126 lpm-pol 0 Jun 30 12:36:54.349773 [ 3.756103] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 30 12:36:54.361712 [ 3.771391] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 127,32 bit host data width,128 deep fifo Jun 30 12:36:54.373743 [ 3.784360] mmc_host mmc0: card is polling. Jun 30 12:36:54.389856 [ 3.793140] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 30 12:36:54.389996 [ 3.798233] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 30 12:36:54.397751 [ 3.803908] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 128,32 bit host data width,128 deep fifo Jun 30 12:36:54.397823 [ 3.814213] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 12:36:54.409786 [ 3.814505] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 12:36:54.421750 [ 3.833090] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Jun 30 12:36:54.421811 [ 3.837737] s3c-rtc 101e0000.rtc: registered as rtc1 Jun 30 12:36:54.433721 [ 3.926820] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 12:36:54.529687 [ 3.966334] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 30 12:36:54.565757 [ 3.975641] mmc0: new DDR MMC card at address 0001 Jun 30 12:36:54.565817 [ 3.984529] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Jun 30 12:36:54.577616 [ 3.998492] mmcblk0: p1 p2 p3 p4 Jun 30 12:36:54.589706 [ 4.007679] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Jun 30 12:36:54.601747 [ 4.015578] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Jun 30 12:36:54.613731 [ 4.025533] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Jun 30 12:36:54.625689 [ 4.128112] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 12:36:54.721820 [ 4.142284] mmc1: new high speed SDHC card at address aaaa Jun 30 12:36:54.733754 [ 4.147898] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Jun 30 12:36:54.745691 [ 4.262097] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 30 12:36:54.853778 [ 4.270563] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 30 12:36:54.865765 [ 4.275952] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 30 12:36:54.877741 [ 4.286948] ata1.00: configured for UDMA/133 Jun 30 12:36:54.877801 [ 4.291566] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 30 12:36:54.889726 [ 4.307009] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 30 12:36:54.901773 [ 4.313158] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 30 12:36:54.913621 [ 4.323468] sd 0:0:0:0: [sda] Write Protect is off Jun 30 12:36:54.913654 [ 4.330535] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 30 12:36:54.925771 [ 4.339458] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 30 12:36:54.937603 [ 4.367585] sda: sda1 sda2 < sda5 > Jun 30 12:36:54.961619 [ 4.370981] sd 0:0:0:0: [sda] Attached SCSI disk Jun 30 12:36:54.961653 [ 4.512891] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Jun 30 12:36:55.105746 [ 4.526377] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 12:36:55.117736 [ 4.531147] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 12:36:55.129691 [ 4.592963] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002000010 Jun 30 12:36:55.189778 [ 4.602160] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Jun 30 12:36:55.201755 [ 4.607285] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 12:36:55.201817 [ 4.612709] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 12:36:55.213754 [ 4.620378] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 12:36:55.213817 [ 4.636267] hub 3-0:1.0: USB hub found Jun 30 12:36:55.225742 [ 4.639015] hub 3-0:1.0: 1 port detected Jun 30 12:36:55.237758 [ 4.643669] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 12:36:55.237828 [ 4.651913] hub 4-0:1.0: USB hub found Jun 30 12:36:55.249705 [ 4.654880] hub 4-0:1.0: 1 port detected Jun 30 12:36:55.249764 [ 4.955445] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 12:36:55.549763 [ 5.131596] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 12:36:55.729746 [ 5.268389] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 12:36:55.861772 [ 5.376685] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 12:36:55.969767 [ 5.485069] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 12:36:56.077766 [ 5.593417] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 12:36:56.185654 [ 5.757732] I/O error, dev mmcblk1, sector 7743712 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 Jun 30 12:36:56.353753 [ 6.048615] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 12:36:56.641702 [ 6.221672] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 12:36:56.821718 [ 6.336032] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 12:36:56.929762 [ 6.443784] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 12:36:57.037765 [ 6.551500] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 12:36:57.145767 [ 6.659244] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 12:36:57.253784 [ 6.666862] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 12:36:57.265771 Begin: Loading essential drivers ... done. Jun 30 12:36:57.313694 Begin: Running /scripts/init-premount ... done. Jun 30 12:37:00.321788 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 30 12:37:00.336588 Begin: Running /scripts/local-premount ... done. Jun 30 12:37:00.348424 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 30 12:37:00.432404 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 30 12:37:00.540445 /dev/mapper/arndale--metrocentre--vg-root: clean, 46073/1220608 files, 606032/4882432 blocks Jun 30 12:37:00.804437 done. Jun 30 12:37:00.816423 [ 10.228645] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 30 12:37:00.828391 [ 10.642247] EXT4-fs (dm-0): mounted filesystem 87085491-453e-44e2-b3c4-92c89d8bf1d7 ro with ordered data mode. Quota mode: disabled. Jun 30 12:37:01.248355 done. Jun 30 12:37:01.248355 Begin: Running /scripts/local-bottom ... done. Jun 30 12:37:01.296594 Begin: Running /scripts/init-bottom ... done. Jun 30 12:37:01.332395 INIT: version 3.06 booting Jun 30 12:37:01.812799 INIT: No inittab.d directory found Jun 30 12:37:01.888731 Using makefile-style concurrent boot in runlevel S. Jun 30 12:37:02.140546 Starting hotplug events dispatcher: systemd-udevd. Jun 30 12:37:03.809765 Synthesizing the initial hotplug events (subsystems)...done. Jun 30 12:37:04.253744 Synthesizing the initial hotplug events (devices)...done. Jun 30 12:37:05.117705 Waiting for /dev to be fully populated...[ 14.593769] usb3503 usb-hub: switched to HUB mode Jun 30 12:37:05.189784 [ 14.597158] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 12:37:05.189847 [ 14.604931] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 30 12:37:05.201747 [ 14.661180] s5p-secss 10830000.sss: s5p-sss driver registered Jun 30 12:37:05.249735 [ 14.732168] mc: Linux media interface: v0.10 Jun 30 12:37:05.321740 [ 14.934197] videodev: Linux video capture interface: v2.00 Jun 30 12:37:05.525639 [ 14.957470] usb 2-3: new high-speed USB device number 2 using exynos-ehci Jun 30 12:37:05.549631 [ 15.188911] hub 2-3:1.0: USB hub found Jun 30 12:37:05.777732 [ 15.192199] hub 2-3:1.0: 3 ports detected Jun 30 12:37:05.789688 [ 15.208615] s5p-mfc 11000000.codec: Adding to iommu group 0 Jun 30 12:37:05.801725 [ 15.243107] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Jun 30 12:37:05.837748 [ 15.315835] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 12:37:05.909771 [ 15.323606] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 12:37:05.921776 [ 15.332275] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 12:37:05.933758 [ 15.343153] s5p-mfc 11000000.codec: decoder registered as /dev/video0 Jun 30 12:37:05.933821 [ 15.358399] s5p-mfc 11000000.codec: encoder registered as /dev/video1 Jun 30 12:37:05.957695 [ 15.379345] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 12:37:05.981694 [ 15.418777] exynos-gsc 13e00000.gsc: Adding to iommu group 1 Jun 30 12:37:06.017626 [ 15.426366] exynos-gsc 13e10000.gsc: Adding to iommu group 2 Jun 30 12:37:06.017661 [ 15.466971] exynos-gsc 13e20000.gsc: Adding to iommu group 3 Jun 30 12:37:06.065724 [ 15.475835] exynos-gsc 13e30000.gsc: Adding to iommu group 4 Jun 30 12:37:06.065787 [ 15.506564] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Jun 30 12:37:06.101763 [ 15.517019] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 12:37:06.113775 [ 15.537671] wm8994 3-001a: Device is not a WM8994, ID is 0 Jun 30 12:37:06.128586 [ 15.584722] usb 2-3.2: new high-speed USB device number 3 using exynos-ehci Jun 30 12:37:06.188832 [ 15.594022] wm8994 3-001a: probe with driver wm8994 failed with error -22 Jun 30 12:37:06.188919 [ 15.709143] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 12:37:06.308709 [ 15.791830] hub 2-3.2:1.0: USB hub found Jun 30 12:37:06.392581 [ 15.798566] hub 2-3.2:1.0: 4 ports detected Jun 30 12:37:06.392581 [ 15.822587] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 12:37:06.428554 [ 15.931835] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 12:37:06.536561 [ 16.040518] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 12:37:06.644562 [ 16.132217] usb 2-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 30 12:37:06.728596 [ 16.181654] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 12:37:06.776617 [ 16.189333] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 12:37:06.788622 [ 16.198112] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 12:37:06.800612 [ 16.211880] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 12:37:06.812796 [ 16.219566] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 12:37:06.824628 [ 16.228270] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 12:37:06.836555 [ 16.315420] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 30 12:37:06.920554 [ 16.484947] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 12:37:07.088586 [ 16.609917] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 12:37:07.208600 [ 16.724324] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 12:37:07.328563 [ 16.832077] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 12:37:07.436564 [ 16.953160] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 12:37:07.556612 [ 16.960765] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 12:37:07.556612 [ 17.014040] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 12:37:07.616662 [ 17.028284] Asix Electronics AX88772A usb-002:004:10: attached PHY driver (mii_bus:phy_addr=usb-002:004:10, irq=POLL) Jun 30 12:37:07.628641 [ 17.038130] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, f6:39:30:4e:7a:73 Jun 30 12:37:07.640734 [ 17.087274] usbcore: registered new device driver onboard-usb-dev Jun 30 12:37:07.688754 [ 17.094459] usb 2-3.2.4: USB disconnect, device number 4 Jun 30 12:37:07.688817 [ 17.098711] asix 2-3.2.4:1.0 eth0: unregister 'asix' usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet Jun 30 12:37:07.700581 [ 17.262872] hub 2-3.2:1.0: USB hub found Jun 30 12:37:07.856600 [ 17.265841] hub 2-3.2:1.0: 4 ports detected Jun 30 12:37:07.856600 [ 17.277784] hub 2-3.2:1.0: USB hub found Jun 30 12:37:07.868585 [ 17.280686] hub 2-3.2:1.0: 4 ports detected Jun 30 12:37:07.880568 [ 17.612299] usb 2-3.2.4: new high-speed USB device number 5 using exynos-ehci Jun 30 12:37:08.216564 [ 18.423914] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:005:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 12:37:09.028610 [ 18.438285] Asix Electronics AX88772A usb-002:005:10: attached PHY driver (mii_bus:phy_addr=usb-002:005:10, irq=POLL) Jun 30 12:37:09.040628 [ 18.448184] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, f6:39:30:4e:7a:73 Jun 30 12:37:09.052577 [ 18.535413] asix 2-3.2.4:1.0 enxf639304e7a73: renamed from eth0 Jun 30 12:37:09.136558 done. Jun 30 12:37:09.208666 [ 19.112235] EXT4-fs (dm-0): re-mounted 87085491-453e-44e2-b3c4-92c89d8bf1d7 r/w. Quota mode: disabled. Jun 30 12:37:09.716739 Checking file systems.../dev/sda1: clean, 2179/61056 files, 44462/243968 blocks Jun 30 12:37:11.340415 done. Jun 30 12:37:11.364386 Cleaning up temporary files... /tmp. Jun 30 12:37:11.616534 [ 21.213409] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 30 12:37:11.808391 [ 21.265457] EXT4-fs (sda1): mounted filesystem 8892999c-db6c-4a4f-a368-2e087fec0dee r/w with ordered data mode. Quota mode: disabled. Jun 30 12:37:11.868458 [ 21.365670] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k Jun 30 12:37:11.964440 Mounting local filesystems...done. Jun 30 12:37:12.204431 Activating swapfile swap, if any...done. Jun 30 12:37:12.204431 Cleaning up temporary files.... Jun 30 12:37:12.240418 Starting Setting kernel variables: sysctl. Jun 30 12:37:12.408331 Configuring network interfaces...RTNETLINK answers: Operation not supported Jun 30 12:37:13.188442 done. Jun 30 12:37:13.188442 Cleaning up temporary files.... Jun 30 12:37:13.248420 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Jun 30 12:37:13.308385 Starting nftables: none Jun 30 12:37:13.356561 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Jun 30 12:37:13.488422 failed! Jun 30 12:37:13.500392 startpar: service(s) returned failure: nftables ... failed! Jun 30 12:37:13.500392 INIT: Entering runlevel: 2 Jun 30 12:37:13.524505 Using makefile-style concurrent boot in runlevel 2. Jun 30 12:37:13.536517 Starting Apache httpd web server: apache2[ 27.533903] platform sound: deferred probe pending: arndale-audio: snd_soc_register_card() failed Jun 30 12:37:18.136722 AH00557: apache2: apr_sockaddr_info_get() failed for arndale-metrocentre Jun 30 12:37:39.245903 AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1. Set the 'ServerName' directive globally to suppress this message Jun 30 12:37:39.257849 . Jun 30 12:37:52.397818 Starting NTP server: ntpd Jun 30 12:37:52.457783 2024-06-30T12:37:54 ntpd[1109]: INIT: ntpd ntpsec-1.2.2: Starting Jun 30 12:37:52.805842 2024-06-30T12:37:54 ntpd[1109]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 30 12:37:52.817757 . Jun 30 12:37:52.817808 Starting system message bus: dbus. Jun 30 12:37:53.324798 Starting SMP IRQ Balancer: irqbalance. Jun 30 12:37:53.420746 Starting OpenBSD Secure Shell server: sshd. Jun 30 12:37:53.938045 Starting /usr/local/sbin/xenstored... Jun 30 12:37:56.112568 Setting domain 0 name, domid and JSON config... Jun 30 12:37:56.124554 Done setting up Dom0 Jun 30 12:37:56.124554 Starting xenconsoled... Jun 30 12:37:56.124554 Starting QEMU as disk backend for dom0 Jun 30 12:37:56.124554 Jun 30 12:37:57.204530 Debian GNU/Linux 12 arndale-metrocentre hvc0 Jun 30 12:37:57.216529 Jun 30 12:37:57.216529 arndale-metrocentre login: INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 12:39:36.245764 Jun 30 12:43:28.784988 (XEN) *** Serial input to Xen (type 'CTRL-x' three times to switch input) Jun 30 12:43:28.812736 Jun 30 12:43:28.814048 Jun 30 12:43:29.781437 (XEN) '0' pressed -> dumping Dom0's registers Jun 30 12:43:29.800808 (XEN) *** Dumping Dom0 vcpu#0 state: *** Jun 30 12:43:29.800808 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Not tainted ]---- Jun 30 12:43:29.800808 (XEN) CPU: Jun 30 12:43:29.803666 0 Jun 30 12:43:29.812681 (XEN) PC: c031be28 Jun 30 12:43:29.812681 (XEN) CPSR: 60070093 MODE:32-bit Guest SVC Jun 30 12:43:29.812681 (XEN) R0: 00000005 R1: 00000000 R2: 00031309 R3: c031be20 Jun 30 12:43:29.822950 (XEN) R4: c1b09d40 R5: c1d26f50 R6: c1b04e5c R7: c1b04e98 Jun 30 12:43:29.822950 (XEN) R8: 00000000 R9: 00000000 R10:000000ad R11:00000000 R12:c1d264a0 Jun 30 12:43:29.836693 (XEN) USR: SP: bea7d960 LR: b6db4685 Jun 30 12:43:29.836693 (XEN) SVC: SP: c1b01f78 LR: c114e078 SPSR:60070013 Jun 30 12:43:29.836693 (XEN) ABT: SP: c1d38b10 LR: c0300ec0 SPSR:60030193 Jun 30 12:43:29.848612 [ 399.252077] d(XEN) UND: SP: c1d38b20 LR: c0300fc0 SPSR:60070093 Jun 30 12:43:29.848612 wmmc_exynos 1220(XEN) IRQ: SP: c1d38b00 LR: c0300bc0 SPSR:60070193 Jun 30 12:43:29.860745 0000.mmc: Unexpe(XEN) FIQ: SP: c1d38b30 LR: c1d38b30 SPSR:00000000 Jun 30 12:43:29.860766 cted interrupt l(XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Jun 30 12:43:29.872812 atency Jun 30 12:43:29.872874 (XEN) Jun 30 12:43:29.872915 (XEN) SCTLR: 10c5387d Jun 30 12:43:29.872957 (XEN) TCR: 00000000 Jun 30 12:43:29.872997 (XEN) TTBR0: 0000000065f3006a Jun 30 12:43:29.873039 (XEN) TTBR1: 000000006020406a Jun 30 12:43:29.884661 (XEN) IFAR: b6eb4a4c, IFSR: 00000007 Jun 30 12:43:29.884661 (XEN) DFAR: 00414ffc, DFSR: 00000817 Jun 30 12:43:29.884661 (XEN) Jun 30 12:43:29.884661 (XEN) VTCR_EL2: 80003558 Jun 30 12:43:29.896617 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 12:43:29.896617 (XEN) Jun 30 12:43:29.896617 (XEN) SCTLR_EL2: 30cd187f Jun 30 12:43:29.896617 (XEN) HCR_EL2: 007c663f Jun 30 12:43:29.896617 (XEN) TTBR0_EL2: 0000000041107000 Jun 30 12:43:29.908604 (XEN) Jun 30 12:43:29.908604 (XEN) ESR_EL2: 07e00000 Jun 30 12:43:29.908604 (XEN) HPFAR_EL2: 00104810 Jun 30 12:43:29.908604 (XEN) HDFAR: e0807f00 Jun 30 12:43:29.908604 (XEN) HIFAR: c0d9e04c Jun 30 12:43:29.920657 (XEN) Jun 30 12:43:29.920657 (XEN) Guest stack trace from sp=c1b01f78: Jun 30 12:43:29.920657 (XEN) Failed to convert stack to physical address Jun 30 12:43:29.920657 (XEN) *** Dumping Dom0 vcpu#1 state: *** Jun 30 12:43:29.932663 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Not tainted ]---- Jun 30 12:43:29.932663 (XEN) CPU: 0 Jun 30 12:43:29.932663 (XEN) PC: c031be28 Jun 30 12:43:29.932663 (XEN) CPSR: 600e0093 MODE:32-bit Guest SVC Jun 30 12:43:29.944638 (XEN) R0: 00000005 R1: 00000000 R2: 00011939 R3: c031be20 Jun 30 12:43:29.944638 (XEN) R4: c2110880 R5: c1d26f50 R6: c1b04e5c R7: c1b04e98 Jun 30 12:43:29.956666 (XEN) R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:c1d264a0 Jun 30 12:43:29.956666 (XEN) USR: SP: bef70938 LR: b6be2853 Jun 30 12:43:29.956666 (XEN) SVC: SP: e08d9fa0 LR: c114e078 SPSR:600e0013 Jun 30 12:43:29.968807 (XEN) ABT: SP: c1d38b50 LR: c0300ec0 SPSR:60030193 Jun 30 12:43:29.968870 (XEN) UND: SP: c1d38b60 LR: c0300fc0 SPSR:600e0093 Jun 30 12:43:29.980835 (XEN) IRQ: SP: c1d38b40 LR: c0300bc0 SPSR:600e0193 Jun 30 12:43:29.980895 (XEN) FIQ: SP: c1d38b70 LR: c1d38b70 SPSR:00000000 Jun 30 12:43:29.980941 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Jun 30 12:43:29.992830 (XEN) Jun 30 12:43:29.992888 (XEN) SCTLR: 10c5387d Jun 30 12:43:29.992931 (XEN) TCR: 00000000 Jun 30 12:43:29.992972 (XEN) TTBR0: 00000000671a406a Jun 30 12:43:30.004700 (XEN) TTBR1: 000000006020406a Jun 30 12:43:30.004757 (XEN) IFAR: b6f93c34, IFSR: 00000007 Jun 30 12:43:30.004803 (XEN) DFAR: b6f55abc, DFSR: 0000081f Jun 30 12:43:30.004847 (XEN) Jun 30 12:43:30.016663 (XEN) VTCR_EL2: 80003558 Jun 30 12:43:30.016663 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 12:43:30.016663 (XEN) Jun 30 12:43:30.016663 (XEN) SCTLR_EL2: 30cd187f Jun 30 12:43:30.016663 (XEN) HCR_EL2: 007c663f Jun 30 12:43:30.016663 (XEN) TTBR0_EL2: 0000000041107000 Jun 30 12:43:30.028688 (XEN) Jun 30 12:43:30.028688 (XEN) ESR_EL2: 07e00000 Jun 30 12:43:30.028688 (XEN) HPFAR_EL2: 00104810 Jun 30 12:43:30.028688 (XEN) HDFAR: e0807f00 Jun 30 12:43:30.028688 (XEN) HIFAR: c0d9e04c Jun 30 12:43:30.040647 (XEN) Jun 30 12:43:30.040647 (XEN) Guest stack trace from sp=e08d9fa0: Jun 30 12:43:30.040647 (XEN) Failed to convert stack to physical address Jun 30 12:43:30.040647 Jun 30 12:43:31.792496 (XEN) 'H' pressed -> dumping heap info (now = 406593145625) Jun 30 12:43:31.814998 (XEN) heap[node=0][zone=0] -> 16284 pages Jun 30 12:43:31.815057 (XEN) heap[n Jun 30 12:43:31.816213 ode=0][zone=1] -> 0 pages Jun 30 12:43:31.828637 (XEN) heap[node=0][zone=2] -> 0 pages Jun 30 12:43:31.828692 (XEN) heap[node=0][zone=3] -> 0 pages Jun 30 12:43:31.828735 (XEN) heap[node=0][zone=4] -> 0 pages Jun 30 12:43:31.828778 (XEN) heap[node=0][zone=5] -> 0 pages Jun 30 12:43:31.840649 (XEN) heap[node=0][zone=6] -> 0 pages Jun 30 12:43:31.840749 (XEN) heap[node=0][zone=7] -> 0 pages Jun 30 12:43:31.840749 (XEN) heap[node=0][zone=8] -> 0 pages Jun 30 12:43:31.852615 (XEN) heap[node=0][zone=9] -> 0 pages Jun 30 12:43:31.852615 (XEN) heap[node=0][zone=10] -> 0 pages Jun 30 12:43:31.852615 (XEN) heap[node=0][zone=11] -> 0 pages Jun 30 12:43:31.852615 (XEN) heap[node=0][zone=12] -> 0 pages Jun 30 12:43:31.868655 (XEN) heap[node=0][zone=13] -> 0 pages Jun 30 12:43:31.868655 (XEN) heap[node=0][zone=14] -> 0 pages Jun 30 12:43:31.868655 (XEN) heap[node=0][zone=15] -> 0 pages Jun 30 12:43:31.868655 (XEN) heap[node=0][zone=16] -> 0 pages Jun 30 12:43:31.868655 (XEN) heap[node=0][zone=17] -> 0 pages Jun 30 12:43:31.880632 (XEN) heap[node=0][zone=18] -> 0 pages Jun 30 12:43:31.880632 (XEN) heap[node=0][zone=19] -> 130833 pages Jun 30 12:43:31.880632 (XEN) heap[node=0][zone=20] -> 241626 pages Jun 30 12:43:31.892624 (XEN) heap[node=0][zone=21] -> 0 pages Jun 30 12:43:31.892624 (XEN) heap[node=0][zone=22] -> 0 pages Jun 30 12:43:31.892624 (XEN) heap[node=0][zone=23] -> 0 pages Jun 30 12:43:31.904623 (XEN) heap[node=0][zone=24] -> 0 pages Jun 30 12:43:31.904623 (XEN) heap[node=0][zone=25] -> 0 pages Jun 30 12:43:31.904623 (XEN) heap[node=0][zone=26] -> 0 pages Jun 30 12:43:31.904623 (XEN) heap[node=0][zone=27] -> 0 pages Jun 30 12:43:31.916592 (XEN) heap[node=0][zone=28] -> 0 pages Jun 30 12:43:31.916592 Jun 30 12:43:33.793470 Jun 30 12:43:35.555301 Jun 30 12:43:35.792402 Jun 30 12:43:37.564227 Jun 30 12:43:37.778349 (XEN) Dumping timer queues: Jun 30 12:43:37.801897 (XEN) CPU00: Jun 30 12:43:37.801897 (XEN) ex= 3568us timer=43fef968 cb=vtimer.c#virt_timer_expired(43fef960) Jun 30 12:43:37.801897 (XEN) CPU0 Jun 30 12:43:37.804166 1: Jun 30 12:43:37.813706 (XEN) ex= 70718us timer=43fdc968 cb=vtimer.c#virt_timer_expired(43fdc960) Jun 30 12:43:37.813737 Jun 30 12:43:39.812742 Jun 30 12:43:41.577772 Jun 30 12:43:41.821609 (XEN) 'd' pressed -> dumping registers Jun 30 12:43:41.840746 (XEN) Jun 30 12:43:41.840792 (XEN) *** Dumping CPU0 host state: *** Jun 30 12:43:41.840792 (XEN) ----[ Xen-4.19-unstable arm32 debug=y N Jun 30 12:43:41.843115 ot tainted ]---- Jun 30 12:43:41.852620 (XEN) CPU: 0 Jun 30 12:43:41.852620 (XEN) PC: 0025ef7c domain.c#idle_loop+0x130/0x1ac Jun 30 12:43:41.852620 (XEN) CPSR: 6007005a MODE:Hypervisor Jun 30 12:43:41.852620 (XEN) R0: 00000000 R1: 0029f300 R2: 00000000 R3: 00000000 Jun 30 12:43:41.864648 (XEN) R4: 00000000 R5: 002f80e0 R6: 0032b324 R7: 00000001 Jun 30 12:43:41.864648 (XEN) R8: 0032b104 R9: 00000000 R10:40e00000 R11:4003ff54 R12:fffffffc Jun 30 12:43:41.875079 (XEN) HYP: SP: 4003ff44 LR: 00225cb8 Jun 30 12:43:41.875143 (XEN) Jun 30 12:43:41.875182 (XEN) VTCR_EL2: 80003558 Jun 30 12:43:41.888618 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 12:43:41.888618 (XEN) Jun 30 12:43:41.888618 (XEN) SCTLR_EL2: 30cd187f Jun 30 12:43:41.888618 (XEN) HCR_EL2: 007c663f Jun 30 12:43:41.888618 (XEN) TTBR0_EL2: 0000000041107000 Jun 30 12:43:41.888618 (XEN) Jun 30 12:43:41.888618 (XEN) ESR_EL2: 07e00000 Jun 30 12:43:41.900607 (XEN) HPFAR_EL2: 00104810 Jun 30 12:43:41.900607 (XEN) HDFAR: e0807f00 Jun 30 12:43:41.900607 (XEN) HIFAR: c0d9e04c Jun 30 12:43:41.900607 (XEN) Jun 30 12:43:41.900607 (XEN) Xen stack trace from sp=4003ff44: Jun 30 12:43:41.912611 (XEN) 07e00000 00295014 002919ac 4003ff4c 00267818 00000000 00000000 00000000 Jun 30 12:43:41.912611 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 12:43:41.924608 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 12:43:41.924608 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 12:43:41.936613 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 12:43:41.948609 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 12:43:41.948609 (XEN) Xen call trace: Jun 30 12:43:41.948609 (XEN) [<0025ef7c>] domain.c#idle_loop+0x130/0x1ac (PC) Jun 30 12:43:41.960607 (XEN) [<00225cb8>] rcu_needs_cpu+0x40/0x60 (LR) Jun 30 12:43:41.960607 (XEN) [<00267818>] arch_get_xen_caps+0/0x90 Jun 30 12:43:41.960607 (XEN) Jun 30 12:43:41.972610 (XEN) *** Dumping CPU1 host state: *** Jun 30 12:43:41.972610 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Not tainted ]---- Jun 30 12:43:41.972610 (XEN) CPU: 1 Jun 30 12:43:41.972610 (XEN) PC: 0025ef7c domain.c#idle_loop+0x130/0x1ac Jun 30 12:43:41.984605 (XEN) CPSR: 600f005a MODE:Hypervisor Jun 30 12:43:41.984605 (XEN) R0: 00000000 R1: 0029f300 R2: 3fd0e000 R3: 00000000 Jun 30 12:43:41.996613 (XEN) R4: 00000001 R5: 002f80e0 R6: 0032b324 R7: 00000002 Jun 30 12:43:41.996613 (XEN) R8: 0032b104 R9: 00000001 R10:40e00000 R11:4000ff54 R12:fffffffc Jun 30 12:43:42.008613 (XEN) HYP: SP: 4000ff44 LR: 00225cb8 Jun 30 12:43:42.008613 (XEN) Jun 30 12:43:42.008613 (XEN) VTCR_EL2: 80003558 Jun 30 12:43:42.008613 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 12:43:42.008613 (XEN) Jun 30 12:43:42.008613 (XEN) SCTLR_EL2: 30cd187f Jun 30 12:43:42.020737 (XEN) HCR_EL2: 007c663f Jun 30 12:43:42.020799 (XEN) TTBR0_EL2: 00000000ba004000 Jun 30 12:43:42.020843 (XEN) Jun 30 12:43:42.020881 (XEN) ESR_EL2: 07e00000 Jun 30 12:43:42.020922 (XEN) HPFAR_EL2: 00104810 Jun 30 12:43:42.032608 (XEN) HDFAR: e0807f00 Jun 30 12:43:42.032608 (XEN) HIFAR: c0ac9320 Jun 30 12:43:42.032608 (XEN) Jun 30 12:43:42.032608 (XEN) Xen stack trace from sp=4000ff44: Jun 30 12:43:42.032608 (XEN) 07e00000 002f9290 00000001 4000ff3c 002680f4 00000000 00000000 00000000 Jun 30 12:43:42.044611 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 12:43:42.056618 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 12:43:42.056618 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 12:43:42.068623 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 12:43:42.068623 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 12:43:42.080605 (XEN) Xen call trace: Jun 30 12:43:42.080605 (XEN) [<0025ef7c>] domain.c#idle_loop+0x130/0x1ac (PC) Jun 30 12:43:42.080605 (XEN) [<00225cb8>] rcu_needs_cpu+0x40/0x60 (LR) Jun 30 12:43:42.092595 (XEN) [<002680f4>] start_secondary+0x204/0x20c Jun 30 12:43:42.092595 (XEN) Jun 30 12:43:42.092595 Jun 30 12:43:43.825060 (XEN) 'e' pressed -> dumping event-channel info Jun 30 12:43:43.848861 (XEN) Event channel information for domain 0: Jun 30 12:43:43.848962 (XEN) Polling vCPUs: {} Jun 30 12:43:43.849007 (XEN) port Jun 30 12:43:43.851290 [p/m/s] Jun 30 12:43:43.859667 (XEN) 1 [0/0/ - ]: s=3 n=1 x=0 d=0 p=4 Jun 30 12:43:43.859724 (XEN) 2 [0/0/ - ]: s=5 n=0 x=0 v=2 Jun 30 12:43:43.859769 (XEN) 3 [0/0/ - ]: s=5 n=1 x=0 v=3 Jun 30 12:43:43.872640 (XEN) 4 [0/0/ - ]: s=3 n=0 x=0 d=0 p=1 Jun 30 12:43:43.872699 Jun 30 12:43:45.833035 (XEN) gnttab_usage_print_all [ key 'g' pressed Jun 30 12:43:45.852774 (XEN) -------- active -------- -------- shared -------- Jun 30 12:43:45.852850 (XEN) [ref] localdo Jun 30 12:43:45.855199 m mfn pin localdom gmfn flags Jun 30 12:43:45.864614 (XEN) grant-table for remote d0 (v1) Jun 30 12:43:45.864669 (XEN) 1 frames (64 max), 0 maptrack frames (1024 max) Jun 30 12:43:45.876550 (XEN) no active grant table entries Jun 30 12:43:45.876550 (XEN) gnttab_usage_print_all ] done Jun 30 12:43:45.876550 Jun 30 12:43:47.809887 Jun 30 12:43:49.600497 Jun 30 12:43:49.837661 (XEN) Physical memory information: Jun 30 12:43:49.860770 (XEN) Xen heap: 65136kB free Jun 30 12:43:49.860770 (XEN) heap[19]: 523332kB free Jun 30 12:43:49.860770 (XEN) heap[20]: 966504kB fr Jun 30 12:43:49.863054 ee Jun 30 12:43:49.871203 (XEN) Dom heap: 1489836kB free Jun 30 12:43:49.871203 Jun 30 12:43:51.845707 Jun 30 12:43:53.613886 Jun 30 12:43:53.873506 (XEN) sched_smt_power_savings: disabled Jun 30 12:43:53.897753 (XEN) NOW=428677329125 Jun 30 12:43:53.897753 (XEN) Online Cpus: 0-1 Jun 30 12:43:53.897753 (XEN) Cpupool 0: Jun 30 12:43:53.898416 Jun 30 12:43:53.910757 (XEN) Cpus: 0-1 Jun 30 12:43:53.910757 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Jun 30 12:43:53.910757 (XEN) Scheduler: SMP Credit Scheduler rev2 (credit2) Jun 30 12:43:53.910757 (XEN) Active queues: 1 Jun 30 12:43:53.924645 (XEN) default-weight = 256 Jun 30 12:43:53.924645 (XEN) Runqueue 0: Jun 30 12:43:53.924645 (XEN) ncpus = 2 Jun 30 12:43:53.924645 (XEN) cpus = 0-1 Jun 30 12:43:53.924645 (XEN) max_weight = 256 Jun 30 12:43:53.924645 (XEN) pick_bias = 0 Jun 30 12:43:53.936386 (XEN) instload = 0 Jun 30 12:43:53.936386 (XEN) aveload = 1329 (~0%) Jun 30 12:43:53.936386 (XEN) idlers: 2 Jun 30 12:43:53.936386 (XEN) tickled: 0 Jun 30 12:43:53.948254 (XEN) fully idle cores: 2 Jun 30 12:43:53.948254 (XEN) Domain info: Jun 30 12:43:53.948254 (XEN) Domain: 0 w 256 c 0 v 2 Jun 30 12:43:53.948254 (XEN) 1: [0.0] flags=0 cpu=0 credit=9615294 [w=256] load=433 (~0%) Jun 30 12:43:53.960675 (XEN) 2: [0.1] flags=0 cpu=1 credit=9159412 [w=256] load=905 (~0%) Jun 30 12:43:53.960753 (XEN) Runqueue 0: Jun 30 12:43:53.960796 (XEN) CPU[00] runq=0, sibling={0}, core={0-1} Jun 30 12:43:53.971871 (XEN) CPU[01] runq=0, sibling={1}, core={0-1} Jun 30 12:43:53.971928 (XEN) RUNQ: Jun 30 12:43:53.971969 (XEN) CPUs info: Jun 30 12:43:53.972009 (XEN) CPU[00] current=d[IDLE]v0, curr=d[IDLE]v0, prev=NULL Jun 30 12:43:53.984074 (XEN) CPU[01] current=d[IDLE]v1, curr=d[IDLE]v1, prev=NULL Jun 30 12:43:53.984074 Jun 30 12:43:55.853342 Jun 30 12:43:57.624520 Jun 30 12:43:57.861696 (XEN) Synced stime skew: max=125ns avg=125ns samples=1 current=125ns Jun 30 12:43:57.877908 (XEN) Synced cycles skew: max=1 avg=1 samples=1 current=1 Jun 30 12:43:57.877996 Jun 30 12:43:57.880146 Jun 30 12:43:59.870123 Jun 30 12:44:01.638491 Jun 30 12:44:01.851951 Jun 30 12:44:03.646146 Jun 30 12:44:03.893430 Jun 30 12:44:05.658618 Jun 30 12:44:15.909256 (XEN) 'q' pressed -> dumping domain info (now = 450705501916) Jun 30 12:44:15.928751 (XEN) General information for domain 0: Jun 30 12:44:15.928751 (XEN) refcnt=3 dying=0 pause Jun 30 12:44:15.931062 _count=0 Jun 30 12:44:15.940671 (XEN) nr_pages=131072 xenheap_pages=2 dirty_cpus={} max_pages=131072 Jun 30 12:44:15.940671 (XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=00000020 Jun 30 12:44:15.952701 (XEN) p2m mappings for domain 0 (vmid 1): Jun 30 12:44:15.952701 (XEN) 1G mappings: 0 (shattered 0) Jun 30 12:44:15.952701 (XEN) 2M mappings: 255 (shattered 1) Jun 30 12:44:15.964639 (XEN) 4K mappings: 944 Jun 30 12:44:15.964639 (XEN) Rangesets belonging to domain 0: Jun 30 12:44:15.964639 (XEN) Interrupts { 32-72, 74, 77-79, 82-84, 86, 88-100, 103-104, 107-110, 114, 116-120, 123, 126-128, 138, 144, 146-147, 149-151, 156 } Jun 30 12:44:15.976670 (XEN) I/O Memory { 2020-2050, 3810-3811, 3830-3831, 3860-3861, 10000-10001, 10010-10045, 10050-10055, 10060-10061, 101b0-101b1, 101d0-101d1, 101e0-101e1, 10440-10441, 10800-10801, 10830-10831, 10850-10851, 10a60-10a61, 10d10-10d11, 11000-11010, 11200-11201, 11210-11211, 11400-11401, 11800-11805, 11c00-11c01, 11c10-11c11, 11d40-11d41, 11f20-11f21, 12000-12010, 12100-12101, 12110-12111, 12120-12121, 12130-12131, 12170-12171, 121a0-121a1, 121b0-121b1, 121d0-121d1, 12200-12201, 12210-12211, 12220-12221, 12230-12231, 12250-12251, 122f0-122f1, 12c00-12c01, 12c10-12c11, 12c30-12c31, 12c60-12c61, 12c70-12c71, 12c80-12c81, 12c90-12c91, 12ca0-12ca1, 12cb0-12cb1, 12cc0-12cc1, 12cd0-12cd1, 12ce0-12ce1, 12d10-12d11, 12d20-12d21, 12d30-12d31, 12d40-12d41, 12d60-12d61, 12d70-12d71, 12dd0-12dd1, 13260-13261, 13270-13271, 13280-13281, 13290-13291, 132a0-132a1, 132b0-132b1, 132c0-132c1, 132d0-132d1, 132e0-132e1, 132f0-132f1, 13400-13401, 13c40-13c41, 13c50-13c51, 13e00-13e01, 13e10-13e11, 13e20-13e21, 13e30-13e31, 13e80-13e81, 13e90-13e91, 13ea0-13ea1, 13eb0-13eb1, 14400-14440, 14450-14460, 14500-14510, 14530-145a0, 145b0-145b1, 14640-14641, 14650-14651 } Jun 30 12:44:16.072643 (XEN) NODE affinity for domain 0: [0] Jun 30 12:44:16.084566 (XEN) VCPU information and callbacks for domain 0: Jun 30 12:44:16.084566 (XEN) UNIT0 affinities: hard={0-1} soft={0-1} Jun 30 12:44:16.084566 (XEN) VCPU0: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Jun 30 12:44:16.096567 (XEN) pause_count=0 pause_flags=1 Jun 30 12:44:16.096567 (XEN) GICH_LRs (vcpu 0) mask=0 Jun 30 12:44:16.096567 (XEN) VCPU_LR[0]=0 Jun 30 12:44:16.108561 (XEN) VCPU_LR[1]=0 Jun 30 12:44:16.108561 (XEN) VCPU_LR[2]=0 Jun 30 12:44:16.108561 (XEN) VCPU_LR[3]=0 Jun 30 12:44:16.108561 (XEN) No periodic timer Jun 30 12:44:16.108561 (XEN) UNIT1 affinities: hard={0-1} soft={0-1} Jun 30 12:44:16.120582 (XEN) VCPU1: CPU0 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Jun 30 12:44:16.120582 (XEN) pause_count=0 pause_flags=1 Jun 30 12:44:16.120582 (XEN) GICH_LRs (vcpu 1) mask=0 Jun 30 12:44:16.132659 (XEN) VCPU_LR[0]=0 Jun 30 12:44:16.132659 (XEN) VCPU_LR[1]=0 Jun 30 12:44:16.132659 (XEN) VCPU_LR[2]=0 Jun 30 12:44:16.132659 (XEN) VCPU_LR[3]=0 Jun 30 12:44:16.132659 (XEN) No periodic timer Jun 30 12:44:16.132659 (XEN) Notifying guest 0:0 (virq 1, port 0) Jun 30 12:44:16.144539 (XEN) Notifying guest 0:1 (virq 1, port 0) Jun 30 12:44:16.144539 Jun 30 12:44:27.909748 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 30 12:44:27.928751 Jun 30 12:44:27.928798 arndale-metrocentre login: Jun 30 12:44:27.930711 Jun 30 12:46:17.844502 Jun 30 12:46:17.844502 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 12:46:17.844502 Jun 30 12:46:17.844502 CPU: Exynos5250@1000MHz Jun 30 12:46:17.856504 Jun 30 12:46:17.856504 Board: Arndale Jun 30 12:46:17.856504 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 12:46:17.856504 ready Jun 30 12:46:17.856504 DRAM: 2 GiB Jun 30 12:46:17.856504 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 12:46:17.880468 trace: enabled Jun 30 12:46:17.916463 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 12:46:18.276463 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 12:46:18.336490 In: serial Jun 30 12:46:18.336490 Out: serial Jun 30 12:46:18.336490 Err: serial Jun 30 12:46:18.336490 SCSI: ARNDALE SCSI INIT Jun 30 12:46:18.336490 Target spinup took 0 ms. Jun 30 12:46:18.348529 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 12:46:18.348529 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 12:46:18.348529 Net: Net Initialization Skipped Jun 30 12:46:18.360515 No ethernet found. Jun 30 12:46:18.360515 Hostname: arndale-metrocentre Jun 30 12:46:18.360515 Hit any key to stop autoboot: 2  1  0 Jun 30 12:46:20.288499 (Re)start USB... Jun 30 12:46:20.288499 USB0: USB EHCI 1.00 Jun 30 12:46:20.288499 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 12:46:25.881740 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 12:46:25.893772 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 12:46:26.337791 Waiting for Ethernet connection... done. Jun 30 12:46:27.933614 BOOTP broadcast 1 Jun 30 12:46:27.933645 BOOTP broadcast 2 Jun 30 12:46:29.493914 DHCP client bound to address 10.149.64.44 (1624 ms) Jun 30 12:46:29.493998 Using asx0 device Jun 30 12:46:29.494040 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 12:46:29.505867 Filename 'pxelinux.0'. Jun 30 12:46:29.505923 Load address: 0x43e00000 Jun 30 12:46:29.505966 Loading: *### Jun 30 12:46:29.529861 2.2 MiB/s Jun 30 12:46:29.529916 done Jun 30 12:46:29.529957 Bytes transferred = 42430 (a5be hex) Jun 30 12:46:29.530002 missing environment variable: pxeuuid Jun 30 12:46:29.530046 Retrieving file: pxelinux.cfg/0A95402C Jun 30 12:46:29.541862 Using asx0 device Jun 30 12:46:29.541917 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 12:46:29.541966 Filename 'pxelinux.cfg/0A95402C'. Jun 30 12:46:29.542010 Load address: 0x51000000 Jun 30 12:46:29.553867 Loading: *# Jun 30 12:46:29.553921 31.3 KiB/s Jun 30 12:46:29.553963 done Jun 30 12:46:29.554002 Bytes transferred = 65 (41 hex) Jun 30 12:46:29.554045 Config file found Jun 30 12:46:29.554085 Ignoring unknown command: serial Jun 30 12:46:29.565820 1: local Jun 30 12:46:29.565873 scanning bus for devices... Jun 30 12:46:29.565917 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 12:46:29.577865 Type: Hard Disk Jun 30 12:46:29.577921 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 12:46:29.589857 Found 1 device(s). Jun 30 12:46:29.589912 Jun 30 12:46:29.589951 SCSI device 0: Jun 30 12:46:29.589991 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 12:46:29.601861 Type: Hard Disk Jun 30 12:46:29.601918 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 12:46:29.601968 ... is now current device Jun 30 12:46:29.602010 Scanning scsi 0... Jun 30 12:46:29.613799 Found U-Boot script /boot.scr Jun 30 12:46:29.781818 1768 bytes read in 37 ms (45.9 KiB/s) Jun 30 12:46:29.829872 ## Executing script at 50000000 Jun 30 12:46:29.829928 Loading dtbs/6.10.0-rc5+/exynos5250-arndale.dtb Jun 30 12:46:29.841781 46641 bytes read in 1746 ms (25.4 KiB/s) Jun 30 12:46:31.533448 983052 bytes read in 106 ms (8.8 MiB/s) Jun 30 12:46:31.653481 Loaded xen-4.19-unstable to 0x41000000 (f000c) Jun 30 12:46:31.665502 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan Jun 30 12:46:31.677513 10785280 bytes read in 507 ms (20.3 MiB/s) Jun 30 12:46:32.185761 Loaded vmlinuz-6.10.0-rc5+ to 0x42000000 (a49200) Jun 30 12:46:32.185832 command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 12:46:32.197748 12142412 bytes read in 763 ms (15.2 MiB/s) Jun 30 12:46:32.953720 Loaded initrd.img-6.10.0-rc5+ to 0x43300000 (b9474c) Jun 30 12:46:32.965744 chosen { Jun 30 12:46:32.965796 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan"; Jun 30 12:46:32.977748 #size-cells = <0x00000001>; Jun 30 12:46:32.977803 #address-cells = <0x00000001>; Jun 30 12:46:32.977846 stdout-path = "serial2:115200n8"; Jun 30 12:46:32.977889 module@1 { Jun 30 12:46:32.989739 reg = <0x43300000 0x00b9474c>; Jun 30 12:46:32.989795 compatible = "xen,linux-initrd", "xen,multiboot-module"; Jun 30 12:46:32.989843 }; Jun 30 12:46:32.989881 module@0 { Jun 30 12:46:32.989919 bootargs = "ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Jun 30 12:46:33.013763 reg = <0x42000000 0x00a49200>; Jun 30 12:46:33.013820 compatible = "xen,linux-zimage", "xen,multiboot-module"; Jun 30 12:46:33.013869 }; Jun 30 12:46:33.013907 }; Jun 30 12:46:33.025754 Booting 0x41000000 - 0x43000000 Jun 30 12:46:33.025810 Kernel image @ 0x41000000 [ 0x000000 - 0x12f000 ] Jun 30 12:46:33.025856 ## Flattened Device Tree blob at 43000000 Jun 30 12:46:33.025900 Booting using the fdt blob at 0x43000000 Jun 30 12:46:33.037719 reserving fdt memory region: addr=43000000 size=c000 Jun 30 12:46:33.037779 Loading Device Tree to 4fff1000, end 4fffffff ... OK Jun 30 12:46:33.049696 Jun 30 12:46:33.049747 Starting kernel ...(fake run for tracing) Jun 30 12:46:33.049794 Jun 30 12:46:33.049831 Jun 30 12:46:33.049867 Starting kernel ... Jun 30 12:46:33.061681 Jun 30 12:46:33.061732 __ __ _ _ _ ___ _ _ _ Jun 30 12:46:33.109775 \ \/ /___ _ __ | || | / |/ _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Jun 30 12:46:33.109836 \ // _ \ '_ \ | || |_ | | (_) |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Jun 30 12:46:33.121680 / \ __/ | | | |__ _|| |\__, |__| |_| | | | \__ \ || (_| | |_) | | __/ Jun 30 12:46:33.121680 /_/\_\___|_| |_| |_|(_)_| /_/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Jun 30 12:46:33.133766 Jun 30 12:46:33.133821 (XEN) Xen version 4.19-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Sun Jun 30 09:16:28 UTC 2024 Jun 30 12:46:33.145764 (XEN) Latest ChangeSet: Wed Jun 26 16:07:30 2024 +0100 git:08f9b1dd9c Jun 30 12:46:33.157773 (XEN) build-id: 49321b95d54bf04a04497dcfff6064128f8c8a55 Jun 30 12:46:33.157834 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Jun 30 12:46:33.169743 (XEN) 32-bit Execution: Jun 30 12:46:33.169798 (XEN) Processor Features: 00001031:00011011 Jun 30 12:46:33.169844 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Jun 30 12:46:33.181739 (XEN) Extensions: GenericTimer Security Jun 30 12:46:33.181798 (XEN) Debug Features: 02010555 Jun 30 12:46:33.181841 (XEN) Auxiliary Features: 00000000 Jun 30 12:46:33.181884 (XEN) Memory Model Features: 10201105 20000000 Jun 30 12:46:33.193767 (XEN) 01240000 02102211 Jun 30 12:46:33.193824 (XEN) ISA Features: 02101110 13112111 21232041 Jun 30 12:46:33.193870 (XEN) 11112131 10011142 00000000 Jun 30 12:46:33.205752 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Jun 30 12:46:33.217810 (XEN) Set SYSRAM to 0000000041000074 (00200074) Jun 30 12:46:33.217870 (XEN) SMP: Allowing 2 CPUs Jun 30 12:46:33.217912 (XEN) enabled workaround for: ARM erratum 766422 Jun 30 12:46:33.229757 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Jun 30 12:46:33.229819 (XEN) GICv2 initialization: Jun 30 12:46:33.229862 (XEN) gic_dist_addr=0000000010481000 Jun 30 12:46:33.241735 (XEN) gic_cpu_addr=0000000010482000 Jun 30 12:46:33.241792 (XEN) gic_hyp_addr=0000000010484000 Jun 30 12:46:33.241837 (XEN) gic_vcpu_addr=0000000010486000 Jun 30 12:46:33.253758 (XEN) gic_maintenance_irq=25 Jun 30 12:46:33.253815 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Jun 30 12:46:33.253863 (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2) Jun 30 12:46:33.265731 (XEN) Initializing Credit2 scheduler Jun 30 12:46:33.265731 (XEN) load_precision_shift: 18 Jun 30 12:46:33.265731 (XEN) load_window_shift: 30 Jun 30 12:46:33.265731 (XEN) underload_balance_tolerance: 0 Jun 30 12:46:33.277816 (XEN) overload_balance_tolerance: -3 Jun 30 12:46:33.277878 (XEN) runqueues arrangement: socket Jun 30 12:46:33.277922 (XEN) cap enforcement granularity: 10ms Jun 30 12:46:33.289776 (XEN) load tracking window length 1073741824 ns Jun 30 12:46:33.289835 (XEN) Allocated console ring of 16 KiB. Jun 30 12:46:33.289880 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Jun 30 12:46:33.301771 (XEN) CPU0: Guest atomics will try 1 times before pausing the domain Jun 30 12:46:33.301834 (XEN) Bringing up CPU1 Jun 30 12:46:33.301876 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Jun 30 12:46:33.313728 (XEN) Brought up 2 CPUs Jun 30 12:46:33.313728 (XEN) CPU 1 booted. Jun 30 12:46:33.313728 (XEN) I/O virtualisation disabled Jun 30 12:46:33.325765 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Jun 30 12:46:33.325830 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Jun 30 12:46:33.325877 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Jun 30 12:46:33.337801 (XEN) Initializing Credit2 scheduler Jun 30 12:46:33.337858 (XEN) load_precision_shift: 18 Jun 30 12:46:33.337901 (XEN) load_window_shift: 30 Jun 30 12:46:33.349766 (XEN) underload_balance_tolerance: 0 Jun 30 12:46:33.349824 (XEN) overload_balance_tolerance: -3 Jun 30 12:46:33.349868 (XEN) runqueues arrangement: socket Jun 30 12:46:33.349911 (XEN) cap enforcement granularity: 10ms Jun 30 12:46:33.361753 (XEN) load tracking window length 1073741824 ns Jun 30 12:46:33.361812 (XEN) Adding cpu 0 to runqueue 0 Jun 30 12:46:33.361855 (XEN) First cpu on runqueue, activating Jun 30 12:46:33.373751 (XEN) Adding cpu 1 to runqueue 0 Jun 30 12:46:33.373807 (XEN) alternatives: Patching with alt table 002c2f84 -> 002c305c Jun 30 12:46:33.373856 (XEN) CPU0 will execute ICIALLU on guest exit Jun 30 12:46:33.385769 (XEN) CPU1 will execute ICIALLU on guest exit Jun 30 12:46:33.385769 (XEN) *** LOADING DOMAIN 0 *** Jun 30 12:46:33.385769 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Jun 30 12:46:33.397767 (XEN) Loading ramdisk from boot module @ 0000000043300000 Jun 30 12:46:33.397833 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Jun 30 12:46:33.409677 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Jun 30 12:46:33.961749 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Jun 30 12:46:33.973703 (XEN) Allocating PPI 16 for event channel interrupt Jun 30 12:46:33.997693 (XEN) d0: extended regions not supported for 32-bit guests Jun 30 12:46:34.009765 (XEN) Loading zImage from 0000000042000000 to 0000000067400000-0000000067e49200 Jun 30 12:46:34.009829 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d9474c Jun 30 12:46:34.121608 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b499 Jun 30 12:46:34.217750 (XEN) Initial low memory virq threshold set at 0x4000 pages. Jun 30 12:46:34.217843 (XEN) Scrubbing Free RAM in background Jun 30 12:46:34.217891 (XEN) Std. Loglevel: All Jun 30 12:46:34.217933 (XEN) Guest Loglevel: All Jun 30 12:46:34.229763 (XEN) *************************************************** Jun 30 12:46:34.229821 (XEN) WARNING: SILO mode is not enabled. Jun 30 12:46:34.229866 (XEN) It has implications on the security of the system, Jun 30 12:46:34.241769 (XEN) unless the communications have been forbidden between Jun 30 12:46:34.241829 (XEN) untrusted domains. Jun 30 12:46:34.241871 (XEN) *************************************************** Jun 30 12:46:34.253720 (XEN) 3... 2... 1... Jun 30 12:46:37.253731 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 30 12:46:37.265700 (XEN) Freed 352kB init memory. Jun 30 12:46:37.265755 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 12:46:38.393759 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Jun 30 12:46:38.417784 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Jun 30 12:46:38.417848 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Jun 30 12:46:38.429735 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Jun 30 12:46:38.429789 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 12:46:38.441686 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 12:46:38.477775 [ 0.000000] Linux version 6.10.0-rc5+ (osstest@himrod1) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Sun Jun 30 08:10:22 UTC 2024 Jun 30 12:46:38.489786 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 30 12:46:38.501731 [ 0.000000] CPU: div instructions available: patching division code Jun 30 12:46:38.501731 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 12:46:38.513767 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 12:46:38.525791 [ 0.000000] Memory policy: Data cache writealloc Jun 30 12:46:38.525850 [ 0.000000] Xen 4.19 support found Jun 30 12:46:38.525896 [ 0.000000] efi: UEFI not found. Jun 30 12:46:38.537734 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 on node -1 Jun 30 12:46:38.537788 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 12:46:38.537833 [ 0.000000] Zone ranges: Jun 30 12:46:38.549741 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Jun 30 12:46:38.549803 [ 0.000000] Normal empty Jun 30 12:46:38.549847 [ 0.000000] HighMem empty Jun 30 12:46:38.561727 [ 0.000000] Movable zone start for each node Jun 30 12:46:38.561727 [ 0.000000] Early memory node ranges Jun 30 12:46:38.561727 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Jun 30 12:46:38.573777 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Jun 30 12:46:38.573846 [ 0.000000] psci: probing for conduit method from DT. Jun 30 12:46:38.585766 [ 0.000000] psci: PSCIv1.1 detected in firmware. Jun 30 12:46:38.585826 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Jun 30 12:46:38.597769 [ 0.000000] psci: Trusted OS migration not required Jun 30 12:46:38.597856 [ 0.000000] psci: SMC Calling Convention v1.2 Jun 30 12:46:38.597918 [ 0.000000] percpu: Embedded 18 pages/cpu s41428 r8192 d24108 u73728 Jun 30 12:46:38.609780 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 12:46:38.621776 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 12:46:38.633773 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Jun 30 12:46:38.645776 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 131072 Jun 30 12:46:38.645876 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Jun 30 12:46:38.657783 [ 0.000000] Memory: 414600K/524288K available (15360K kernel code, 2268K rwdata, 6084K rodata, 2048K init, 439K bss, 44152K reserved, 65536K cma-reserved, 0K highmem) Jun 30 12:46:38.669804 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 12:46:38.681747 [ 0.000000] trace event string verifier disabled Jun 30 12:46:38.681806 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 12:46:38.681852 [ 0.000000] rcu: RCU event tracing is enabled. Jun 30 12:46:38.693762 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Jun 30 12:46:38.693825 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Jun 30 12:46:38.705741 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 12:46:38.717751 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 12:46:38.717812 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 12:46:38.729802 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 12:46:38.729866 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Jun 30 12:46:38.741755 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 12:46:38.753746 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 12:46:38.753815 [ 0.000013] Switching to timer-based delay loop, resolution 41ns Jun 30 12:46:38.765757 [ 0.000542] Console: colour dummy device 80x30 Jun 30 12:46:38.765816 [ 0.000561] printk: legacy console [hvc0] enabled Jun 30 12:46:38.777744 [ 0.299554] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Jun 30 12:46:38.777818 [ 0.309952] CPU: Testing write buffer coherency: ok Jun 30 12:46:38.789750 [ 0.314894] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 12:46:38.801741 [ 0.324448] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 12:46:38.801804 [ 0.330879] pid_max: default: 32768 minimum: 301 Jun 30 12:46:38.813714 [ 0.335644] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 12:46:38.813782 [ 0.342928] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 12:46:38.825782 [ 0.351343] /cpus/cpu@0 missing clock-frequency property Jun 30 12:46:38.825842 [ 0.356130] /cpus/cpu@1 missing clock-frequency property Jun 30 12:46:38.837775 [ 0.361525] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 12:46:38.837837 [ 0.368244] xen:grant_table: Grant tables using version 1 layout Jun 30 12:46:38.849741 [ 0.373380] Grant table initialized Jun 30 12:46:38.849741 [ 0.376931] xen:events: Using FIFO-based ABI Jun 30 12:46:38.849741 [ 0.381234] Xen: initializing cpu0 Jun 30 12:46:38.861778 [ 0.384759] Setting up static identity map for 0x60300000 - 0x603000ac Jun 30 12:46:38.861845 [ 0.392526] rcu: Hierarchical SRCU implementation. Jun 30 12:46:38.873747 [ 0.396152] rcu: Max phase no-delay instances is 1000. Jun 30 12:46:38.873808 [ 0.404366] EFI services will not be available. Jun 30 12:46:38.885713 [ 0.407682] smp: Bringing up secondary CPUs ... Jun 30 12:46:38.885773 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 12:46:38.957756 [ 0.481934] Xen: initializing cpu1 Jun 30 12:46:38.957813 [ 0.482093] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 12:46:38.969735 [ 0.482117] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 12:46:38.969808 [ 0.501086] smp: Brought up 1 node, 2 CPUs Jun 30 12:46:38.981754 [ 0.504748] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 12:46:38.981754 [ 0.511034] CPU: All CPU(s) started in SVC mode. Jun 30 12:46:38.993733 [ 0.516939] devtmpfs: initialized Jun 30 12:46:38.993797 [ 0.529344] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 12:46:39.005785 [ 0.535893] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Jun 30 12:46:39.017788 [ 0.545567] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 12:46:39.029754 [ 0.553463] pinctrl core: initialized pinctrl subsystem Jun 30 12:46:39.029816 [ 0.560092] DMI not present or invalid. Jun 30 12:46:39.029861 [ 0.563601] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 12:46:39.041758 [ 0.570220] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 12:46:39.053736 [ 0.579545] thermal_sys: Registered thermal governor 'step_wise' Jun 30 12:46:39.053799 [ 0.579702] software IO TLB: area num 2. Jun 30 12:46:39.065717 [ 0.588369] software IO TLB: only able to allocate 8 MB Jun 30 12:46:39.065717 [ 0.595442] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Jun 30 12:46:39.077745 [ 0.600642] No ATAGs? Jun 30 12:46:39.077806 [ 0.602949] hw-breakpoint: Failed to enable monitor mode on CPU 0. Jun 30 12:46:39.077856 [ 0.611648] Serial: AMBA PL011 UART driver Jun 30 12:46:39.089724 [ 0.658290] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 65 Jun 30 12:46:39.137729 [ 0.686727] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 30 12:46:39.161740 [ 0.710647] xen:balloon: Initialising balloon driver Jun 30 12:46:39.185629 [ 0.717092] iommu: Default domain type: Translated Jun 30 12:46:39.197645 [ 0.720506] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 12:46:39.197679 [ 0.729293] SCSI subsystem initialized Jun 30 12:46:39.209656 [ 0.732060] usbcore: registered new interface driver usbfs Jun 30 12:46:39.209689 [ 0.737295] usbcore: registered new interface driver hub Jun 30 12:46:39.209715 [ 0.742634] usbcore: registered new device driver usb Jun 30 12:46:39.221668 [ 0.749352] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 12:46:39.221700 [ 0.752947] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 12:46:39.233634 [ 0.759204] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 12:46:39.233634 [ 0.764269] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 12:46:39.245682 [ 0.769198] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 12:46:39.245720 [ 0.775235] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 12:46:39.257687 [ 0.781012] pps_core: LinuxPPS API ver. 1 registered Jun 30 12:46:39.257720 [ 0.785406] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 12:46:39.269656 [ 0.794632] PTP clock support registered Jun 30 12:46:39.269687 [ 0.798868] EDAC MC: Ver: 3.0.0 Jun 30 12:46:39.269711 [ 0.802125] scmi_core: SCMI protocol bus registered Jun 30 12:46:39.281750 [ 0.808820] vgaarb: loaded Jun 30 12:46:39.281805 [ 0.812064] clocksource: Switched to clocksource arch_sys_counter Jun 30 12:46:39.293597 [ 0.829121] NET: Registered PF_INET protocol family Jun 30 12:46:39.305705 [ 0.832779] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Jun 30 12:46:39.317758 [ 0.840667] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 12:46:39.317827 [ 0.848382] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 12:46:39.329774 [ 0.856165] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Jun 30 12:46:39.341755 [ 0.864001] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Jun 30 12:46:39.341819 [ 0.871276] TCP: Hash tables configured (established 4096 bind 4096) Jun 30 12:46:39.353758 [ 0.877650] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 12:46:39.353841 [ 0.884218] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 12:46:39.365756 [ 0.891313] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 12:46:39.365818 [ 0.897479] RPC: Registered named UNIX socket transport module. Jun 30 12:46:39.377757 [ 0.902952] RPC: Registered udp transport module. Jun 30 12:46:39.377817 [ 0.907708] RPC: Registered tcp transport module. Jun 30 12:46:39.389759 [ 0.912503] RPC: Registered tcp-with-tls transport module. Jun 30 12:46:39.389820 [ 0.918056] RPC: Registered tcp NFSv4.1 backchannel transport module. Jun 30 12:46:39.401745 [ 0.924567] PCI: CLS 0 bytes, default 64 Jun 30 12:46:39.401745 [ 0.929977] Initialise system trusted keyrings Jun 30 12:46:39.401745 [ 0.933291] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Jun 30 12:46:39.413686 [ 0.939808] squashfs: version 4.0 (2009/01/31) Phillip Lougher Jun 30 12:46:39.413705 [ 0.945689] NFS: Registering the id_resolver key type Jun 30 12:46:39.425771 [ 0.950616] Key type id_resolver registered Jun 30 12:46:39.425834 [ 0.954855] Key type id_legacy registered Jun 30 12:46:39.437740 [ 0.958958] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Jun 30 12:46:39.437806 [ 0.965713] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Jun 30 12:46:39.449740 [ 0.973425] Trying to unpack rootfs image as initramfs... Jun 30 12:46:39.449801 [ 0.994839] Key type asymmetric registered Jun 30 12:46:39.473763 [ 0.997580] Asymmetric key parser 'x509' registered Jun 30 12:46:39.473823 [ 1.002647] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) Jun 30 12:46:39.485750 [ 1.009992] io scheduler mq-deadline registered Jun 30 12:46:39.485807 [ 1.014612] io scheduler kyber registered Jun 30 12:46:39.485852 [ 1.018719] io scheduler bfq registered Jun 30 12:46:39.497707 [ 1.160116] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 12:46:39.641776 [ 1.166361] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 12:46:39.653688 [ 1.220424] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 12:46:39.701697 [ 1.226687] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 12:46:39.713639 [ 1.254913] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 12:46:39.737728 [ 1.261157] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 12:46:39.737799 [ 1.312220] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 12:46:39.785695 [ 1.318461] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 12:46:39.797717 [ 1.331200] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 12:46:39.809752 [ 1.393706] xen:xen_evtchn: Event-channel device installed Jun 30 12:46:39.869776 [ 1.467735] Freeing initrd memory: 11860K Jun 30 12:46:39.941594 [ 1.493175] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 12:46:39.965736 [ 1.504189] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 12:46:39.989650 [ 1.512397] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 12:46:39.989685 [ 1.521274] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 12:46:40.001656 [ 1.530270] SuperH (H)SCI(F) driver initialized Jun 30 12:46:40.001689 [ 1.534605] STMicroelectronics ASC driver initialized Jun 30 12:46:40.013659 [ 1.539449] STM32 USART driver initialized Jun 30 12:46:40.013691 [ 1.544908] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 12:46:40.025629 [ 1.553803] random: crng init done Jun 30 12:46:40.025661 [ 1.561277] brd: module loaded Jun 30 12:46:40.037741 [ 1.567192] loop: module loaded Jun 30 12:46:40.037799 [ 1.582793] Invalid max_queues (4), will use default max: 2. Jun 30 12:46:40.061684 [ 1.601403] tun: Universal TUN/TAP device driver, 1.6 Jun 30 12:46:40.073730 [ 1.605320] CAN device driver interface Jun 30 12:46:40.085731 [ 1.610398] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Jun 30 12:46:40.085793 [ 1.621599] xen_netfront: Initialising Xen virtual ethernet driver Jun 30 12:46:40.097750 [ 1.626474] pegasus: Pegasus/Pegasus II USB Ethernet driver Jun 30 12:46:40.109744 [ 1.632090] usbcore: registered new interface driver pegasus Jun 30 12:46:40.109806 [ 1.637823] usbcore: registered new interface driver asix Jun 30 12:46:40.121746 [ 1.643292] usbcore: registered new interface driver ax88179_178a Jun 30 12:46:40.121809 [ 1.649431] usbcore: registered new interface driver cdc_ether Jun 30 12:46:40.133709 [ 1.655349] usbcore: registered new interface driver smsc75xx Jun 30 12:46:40.133709 [ 1.661152] usbcore: registered new interface driver smsc95xx Jun 30 12:46:40.145755 [ 1.666977] usbcore: registered new interface driver net1080 Jun 30 12:46:40.145794 [ 1.672706] usbcore: registered new interface driver cdc_subset Jun 30 12:46:40.145821 [ 1.678682] usbcore: registered new interface driver zaurus Jun 30 12:46:40.157752 [ 1.684340] usbcore: registered new interface driver cdc_ncm Jun 30 12:46:40.157813 [ 1.693709] usbcore: registered new interface driver usb-storage Jun 30 12:46:40.169693 [ 1.704228] i2c_dev: i2c /dev entries driver Jun 30 12:46:40.181716 [ 1.722606] device-mapper: uevent: version 1.0.3 Jun 30 12:46:40.193686 [ 1.726027] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev Jun 30 12:46:40.205752 [ 1.735643] cpu cpu0: OPP table can't be empty Jun 30 12:46:40.217755 [ 1.740350] failed to register cpuidle driver Jun 30 12:46:40.217814 [ 1.743762] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Jun 30 12:46:40.229725 [ 1.752096] sdhci: Secure Digital Host Controller Interface driver Jun 30 12:46:40.229789 [ 1.757097] sdhci: Copyright(c) Pierre Ossman Jun 30 12:46:40.229836 [ 1.765170] sdhci-pltfm: SDHCI platform and OF driver helper Jun 30 12:46:40.241710 [ 1.782109] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 12:46:40.253723 [ 1.787555] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Jun 30 12:46:40.265763 [ 1.794249] usbcore: registered new interface driver usbhid Jun 30 12:46:40.277715 [ 1.798911] usbhid: USB HID core driver Jun 30 12:46:40.277774 [ 1.809872] NET: Registered PF_INET6 protocol family Jun 30 12:46:40.289761 [ 1.814304] Segment Routing with IPv6 Jun 30 12:46:40.289819 [ 1.817228] In-situ OAM (IOAM) with IPv6 Jun 30 12:46:40.289864 [ 1.821254] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Jun 30 12:46:40.301771 [ 1.827736] NET: Registered PF_PACKET protocol family Jun 30 12:46:40.301831 [ 1.832370] can: controller area network core Jun 30 12:46:40.313751 [ 1.836763] NET: Registered PF_CAN protocol family Jun 30 12:46:40.313811 [ 1.841592] can: raw protocol Jun 30 12:46:40.313855 [ 1.844647] can: broadcast manager protocol Jun 30 12:46:40.325747 [ 1.848906] can: netlink gateway - max_hops=1 Jun 30 12:46:40.325806 [ 1.853646] Key type dns_resolver registered Jun 30 12:46:40.325852 [ 1.858327] ThumbEE CPU extension supported. Jun 30 12:46:40.337735 [ 1.861995] Registering SWP/SWPB emulation handler Jun 30 12:46:40.337795 [ 1.876429] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level Jun 30 12:46:40.361669 [ 1.883336] Loading compiled-in X.509 certificates Jun 30 12:46:40.361730 [ 1.926563] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 12:46:40.397744 [ 1.930165] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 12:46:40.409781 [ 1.937107] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 12:46:40.421780 [ 1.944964] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 12:46:40.421851 [ 1.993663] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 12:46:40.469730 [ 2.002515] s5m-rtc s5m-rtc: setting system clock to 2000-01-02T00:00:24 UTC (946771224) Jun 30 12:46:40.481721 [ 2.013470] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 12:46:40.493746 [ 2.018082] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 12:46:40.493806 [ 2.022506] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 12:46:40.505753 [ 2.029218] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 12:46:40.505813 [ 2.035127] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 12:46:40.517770 [ 2.041345] clk: Not disabling unused clocks Jun 30 12:46:40.517829 [ 2.044852] PM: genpd: Disabling unused power domains Jun 30 12:46:40.517877 [ 2.053285] Freeing unused kernel image (initmem) memory: 2048K Jun 30 12:46:40.529755 [ 2.059550] Run /init as init process Jun 30 12:46:40.529812 Loading, please wait... Jun 30 12:46:40.565679 Starting systemd-udevd version 252.26-1~deb12u2 Jun 30 12:46:40.625715 [ 3.294391] i2c-gpio i2c-10: using lines 552 (SDA) and 553 (SCL) Jun 30 12:46:41.777706 [ 3.438708] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 12:46:41.921784 [ 3.445839] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 12:46:41.921854 [ 3.469941] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 12:46:41.945771 [ 3.501888] phy phy-12130000.phy.8: phy_power_on was called before phy_init Jun 30 12:46:41.981751 [ 3.507539] exynos-ohci 12120000.usb: USB Host Controller Jun 30 12:46:41.981812 [ 3.513016] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Jun 30 12:46:41.993701 [ 3.524710] phy phy-12130000.phy.8: phy_power_on was called before phy_init Jun 30 12:46:42.005780 [ 3.530307] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 12:46:42.005847 [ 3.535938] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Jun 30 12:46:42.017741 [ 3.553249] Synopsys Designware Multimedia Card Interface Driver Jun 30 12:46:42.029782 [ 3.558390] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 Jun 30 12:46:42.041635 [ 3.595762] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 30 12:46:42.077716 [ 3.607916] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 30 12:46:42.089729 [ 3.614372] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 30 12:46:42.089797 [ 3.621716] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 30 12:46:42.101778 [ 3.627463] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 30 12:46:42.101839 [ 3.632984] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo Jun 30 12:46:42.113808 [ 3.646012] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 Jun 30 12:46:42.125772 [ 3.652182] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 30 12:46:42.125839 [ 3.658122] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 30 12:46:42.137764 [ 3.658372] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 30 12:46:42.149775 [ 3.664657] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 30 12:46:42.149835 [ 3.677823] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 127,32 bit host data width,128 deep fifo Jun 30 12:46:42.161719 [ 3.682088] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 12:46:42.161719 [ 3.691914] hub 1-0:1.0: USB hub found Jun 30 12:46:42.173705 [ 3.711502] mmc_host mmc0: card is polling. Jun 30 12:46:42.185723 [ 3.722930] hub 1-0:1.0: 3 ports detected Jun 30 12:46:42.197755 [ 3.730701] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 12:46:42.209767 [ 3.731368] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 30 12:46:42.209831 [ 3.736298] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 12:46:42.221764 [ 3.741519] ahci-dwc 122f0000.sata: AHCI vers 0001.0300, 32 command slots, 6 Gbps, platform mode Jun 30 12:46:42.233777 [ 3.751137] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 12:46:42.245750 [ 3.759924] ahci-dwc 122f0000.sata: 1/1 ports implemented (port mask 0x1) Jun 30 12:46:42.245813 [ 3.776344] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 30 12:46:42.257740 [ 3.805942] hub 2-0:1.0: USB hub found Jun 30 12:46:42.281767 [ 3.808365] hub 2-0:1.0: 3 ports detected Jun 30 12:46:42.281825 [ 3.811070] VDD_ALIVE_1.0V: Bringing 1000000uV into 1100000-1100000uV Jun 30 12:46:42.293729 [ 3.821625] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Jun 30 12:46:42.293796 [ 3.834190] s3c-rtc 101e0000.rtc: registered as rtc1 Jun 30 12:46:42.305731 [ 3.902455] scsi host0: ahci-dwc Jun 30 12:46:42.377762 [ 3.903685] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 30 12:46:42.389792 [ 3.904716] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 128 lpm-pol 0 Jun 30 12:46:42.401746 [ 3.915102] mmc0: new DDR MMC card at address 0001 Jun 30 12:46:42.401806 [ 3.932088] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Jun 30 12:46:42.413687 [ 3.945321] mmcblk0: p1 p2 p3 p4 Jun 30 12:46:42.425698 [ 3.956704] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 12:46:42.437747 [ 3.966458] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Jun 30 12:46:42.437806 [ 3.972662] mmc1: new high speed SDHC card at address aaaa Jun 30 12:46:42.449737 [ 3.978995] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Jun 30 12:46:42.449797 [ 3.986304] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Jun 30 12:46:42.461752 [ 3.991572] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Jun 30 12:46:42.473674 [ 4.432105] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 30 12:46:42.905734 [ 4.437827] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 30 12:46:42.917767 [ 4.443730] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 30 12:46:42.917830 [ 4.451279] ata1.00: configured for UDMA/133 Jun 30 12:46:42.929777 [ 4.455209] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 30 12:46:42.941746 [ 4.464337] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 30 12:46:42.941817 [ 4.470459] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 30 12:46:42.953748 [ 4.475824] sd 0:0:0:0: [sda] Write Protect is off Jun 30 12:46:42.953817 [ 4.480678] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 30 12:46:42.965764 [ 4.489857] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 30 12:46:42.965826 [ 4.511740] sda: sda1 sda2 < sda5 > Jun 30 12:46:42.989768 [ 4.514464] sd 0:0:0:0: [sda] Attached SCSI disk Jun 30 12:46:42.989826 [ 4.551670] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Jun 30 12:46:43.025751 [ 4.588462] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 12:46:43.061755 [ 4.592726] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 12:46:43.073792 [ 4.602125] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002000010 Jun 30 12:46:43.085746 [ 4.610549] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Jun 30 12:46:43.085808 [ 4.616513] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 12:46:43.097755 [ 4.621826] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 12:46:43.097843 [ 4.629574] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 12:46:43.109764 [ 4.637435] hub 3-0:1.0: USB hub found Jun 30 12:46:43.109821 [ 4.640107] hub 3-0:1.0: 1 port detected Jun 30 12:46:43.121722 [ 4.645091] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 12:46:43.121791 [ 4.674600] hub 4-0:1.0: USB hub found Jun 30 12:46:43.145641 [ 4.677111] hub 4-0:1.0: 1 port detected Jun 30 12:46:43.157699 [ 5.015457] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 12:46:43.497690 [ 5.181160] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 12:46:43.665697 [ 5.317042] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 12:46:43.797732 [ 5.425275] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 12:46:43.905745 [ 5.534454] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 12:46:44.013734 [ 5.642668] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 12:46:44.121810 [ 5.805100] I/O error, dev mmcblk1, sector 7743712 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 Jun 30 12:46:44.289608 [ 6.101027] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 12:46:44.577642 [ 6.260865] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 12:46:44.745600 [ 6.375302] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 12:46:44.853644 [ 6.483054] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 12:46:44.961752 [ 6.590765] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 12:46:45.069737 [ 6.698519] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 12:46:45.177776 [ 6.706144] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 12:46:45.189698 Begin: Loading essential drivers ... done. Jun 30 12:46:45.273683 Begin: Running /scripts/init-premount ... done. Jun 30 12:46:48.285709 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 30 12:46:48.285764 Begin: Running /scripts/local-premount ... done. Jun 30 12:46:48.297628 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 30 12:46:48.345644 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 30 12:46:48.441836 /dev/mapper/arndale--metrocentre--vg-root: recovering journal Jun 30 12:46:48.693786 /dev/mapper/arndale--metrocentre--vg-root: clean, 46076/1220608 files, 606048/4882432 blocks Jun 30 12:46:49.709692 done. Jun 30 12:46:49.733656 [ 11.263584] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 30 12:46:49.733693 [ 11.653163] EXT4-fs (dm-0): mounted filesystem 87085491-453e-44e2-b3c4-92c89d8bf1d7 ro with ordered data mode. Quota mode: disabled. Jun 30 12:46:50.129688 done. Jun 30 12:46:50.129715 Begin: Running /scripts/local-bottom ... done. Jun 30 12:46:50.177650 Begin: Running /scripts/init-bottom ... done. Jun 30 12:46:50.213613 INIT: version 3.06 booting Jun 30 12:46:50.717633 INIT: No inittab.d directory found Jun 30 12:46:50.789632 Using makefile-style concurrent boot in runlevel S. Jun 30 12:46:51.041639 Starting hotplug events dispatcher: systemd-udevd. Jun 30 12:46:52.733672 Synthesizing the initial hotplug events (subsystems)...done. Jun 30 12:46:53.189665 Synthesizing the initial hotplug events (devices)...[ 14.755736] wm8994 3-001a: Device is not a WM8994, ID is 0 Jun 30 12:46:53.225682 [ 14.771074] wm8994 3-001a: probe with driver wm8994 failed with error -22 Jun 30 12:46:53.249631 done. Jun 30 12:46:54.089636 Waiting for /dev to be fully populated...[ 15.660706] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 30 12:46:54.137700 [ 15.668220] s5p-secss 10830000.sss: s5p-sss driver registered Jun 30 12:46:54.137733 [ 15.691251] mc: Linux media interface: v0.10 Jun 30 12:46:54.161645 [ 15.824611] videodev: Linux video capture interface: v2.00 Jun 30 12:46:54.293654 [ 15.938649] s5p-mfc 11000000.codec: Adding to iommu group 0 Jun 30 12:46:54.413648 [ 15.977409] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Jun 30 12:46:54.449682 [ 16.104650] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 12:46:54.581675 [ 16.116260] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 12:46:54.593693 [ 16.123751] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 12:46:54.605689 [ 16.134901] s5p-mfc 11000000.codec: decoder registered as /dev/video0 Jun 30 12:46:54.605723 [ 16.140828] s5p-mfc 11000000.codec: encoder registered as /dev/video1 Jun 30 12:46:54.617656 [ 16.278244] exynos-gsc 13e00000.gsc: Adding to iommu group 1 Jun 30 12:46:54.749655 [ 16.286295] exynos-gsc 13e10000.gsc: Adding to iommu group 2 Jun 30 12:46:54.761681 [ 16.292533] exynos-gsc 13e20000.gsc: Adding to iommu group 3 Jun 30 12:46:54.761714 [ 16.298906] exynos-gsc 13e30000.gsc: Adding to iommu group 4 Jun 30 12:46:54.773662 [ 16.310046] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 12:46:54.785673 [ 16.432173] usb3503 usb-hub: switched to HUB mode Jun 30 12:46:54.905687 [ 16.435525] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 12:46:54.905720 [ 16.504385] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 12:46:54.977804 [ 16.718128] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 12:46:55.193708 [ 16.782609] usb 2-3: new high-speed USB device number 2 using exynos-ehci Jun 30 12:46:55.253660 [ 16.795883] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Jun 30 12:46:55.277613 [ 16.840510] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 12:46:55.313676 [ 16.949701] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 12:46:55.421684 [ 17.001724] hub 2-3:1.0: USB hub found Jun 30 12:46:55.469649 [ 17.004439] hub 2-3:1.0: 3 ports detected Jun 30 12:46:55.481629 [ 17.132151] I/O error, dev mmcblk1, sector 7743713 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 Jun 30 12:46:55.613582 [ 17.330124] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 12:46:55.805693 [ 17.337805] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 12:46:55.817692 [ 17.346525] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 12:46:55.829714 [ 17.359541] usb 2-3.2: new high-speed USB device number 3 using exynos-ehci Jun 30 12:46:55.829750 [ 17.362273] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 12:46:55.841696 [ 17.374258] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 12:46:55.853700 [ 17.382977] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 12:46:55.865639 [ 17.434695] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 12:46:55.913646 [ 17.534717] hub 2-3.2:1.0: USB hub found Jun 30 12:46:56.009686 [ 17.537674] hub 2-3.2:1.0: 4 ports detected Jun 30 12:46:56.009719 [ 17.602814] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 12:46:56.081646 [ 17.679058] usbcore: registered new device driver onboard-usb-dev Jun 30 12:46:56.153654 [ 17.722432] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 12:46:56.201639 [ 17.802919] hub 2-3.2:1.0: USB hub found Jun 30 12:46:56.273657 [ 17.805885] hub 2-3.2:1.0: 4 ports detected Jun 30 12:46:56.273688 [ 17.817877] hub 2-3.2:1.0: USB hub found Jun 30 12:46:56.285648 [ 17.820840] hub 2-3.2:1.0: 4 ports detected Jun 30 12:46:56.297658 [ 17.830193] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 12:46:56.309641 [ 17.938001] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 12:46:56.417638 [ 18.032091] usb 2-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 30 12:46:56.513642 [ 18.045780] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 12:46:56.525689 [ 18.053409] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 12:46:56.525726 done. Jun 30 12:46:56.537615 [ 18.200235] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 30 12:46:56.681628 [ 18.500905] EXT4-fs (dm-0): re-mounted 87085491-453e-44e2-b3c4-92c89d8bf1d7 r/w. Quota mode: disabled. Jun 30 12:46:56.981610 [ 18.904208] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 12:46:57.389641 [ 18.922464] Asix Electronics AX88772A usb-002:004:10: attached PHY driver (mii_bus:phy_addr=usb-002:004:10, irq=POLL) Jun 30 12:46:57.401693 [ 18.932406] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, f2:5c:3f:69:71:cf Jun 30 12:46:57.413651 Checking file systems.../dev/sda1: recovering journal Jun 30 12:46:58.073635 /dev/sda1: clean, 2179/61056 files, 44462/243968 blocks Jun 30 12:46:58.217628 done. Jun 30 12:46:58.493623 Cleaning up temporary files... /tmp. Jun 30 12:46:59.249637 [ 20.979919] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 30 12:46:59.453670 [ 21.031958] EXT4-fs (sda1): mounted filesystem 8892999c-db6c-4a4f-a368-2e087fec0dee r/w with ordered data mode. Quota mode: disabled. Jun 30 12:46:59.513647 [ 21.132366] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k Jun 30 12:46:59.609665 Mounting local filesystems...done. Jun 30 12:46:59.849659 Activating swapfile swap, if any...done. Jun 30 12:46:59.849694 Cleaning up temporary files.... Jun 30 12:46:59.885622 Starting Setting kernel variables: sysctl. Jun 30 12:47:00.053607 [ 22.959520] xenbr0: port 1(eth0) entered blocking state Jun 30 12:47:01.433751 [ 22.963427] xenbr0: port 1(eth0) entered disabled state Jun 30 12:47:01.433804 [ 22.968695] asix 2-3.2.4:1.0 eth0: entered allmulticast mode Jun 30 12:47:01.445677 [ 22.974578] asix 2-3.2.4:1.0 eth0: entered promiscuous mode Jun 30 12:47:01.445711 [ 22.985190] asix 2-3.2.4:1.0 eth0: configuring for phy/internal link mode Jun 30 12:47:01.457659 Configuring network interfaces...RTNETLINK answers: Operation not supported Jun 30 12:47:03.341711 Jun 30 12:47:03.341766 Waiting for xenbr0 to get ready (MAXWAIT is 2 seconds). Jun 30 12:47:03.353577 [ 25.219447] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 30 12:47:03.689676 [ 25.225510] xenbr0: port 1(eth0) entered blocking state Jun 30 12:47:03.701679 [ 25.230696] xenbr0: port 1(eth0) entered forwarding state Jun 30 12:47:03.701712 done. Jun 30 12:47:03.869682 Cleaning up temporary files.... Jun 30 12:47:03.929700 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Jun 30 12:47:04.001771 Starting nftables: none Jun 30 12:47:04.061715 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Jun 30 12:47:04.181759 failed! Jun 30 12:47:04.181811 startpar: service(s) returned failure: nftables ... failed! Jun 30 12:47:04.193704 INIT: Entering runlevel: 2 Jun 30 12:47:04.205688 Using makefile-style concurrent boot in runlevel 2. Jun 30 12:47:04.217719 Starting Apache httpd web server: apache2AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.149.64.44. Set the 'ServerName' directive globally to suppress this message Jun 30 12:47:05.021790 . Jun 30 12:47:06.101698 Starting NTP server: ntpd2000-01-02T00:00:49 ntpd[1145]: INIT: ntpd ntpsec-1.2.2: Starting Jun 30 12:47:06.537779 2000-01-02T00:00:49 ntpd[1145]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 30 12:47:06.549724 . Jun 30 12:47:06.549775 Starting system message bus: dbus. Jun 30 12:47:06.993688 Starting SMP IRQ Balancer: irqbalance. Jun 30 12:47:07.053720 Starting OpenBSD Secure Shell server: sshd. Jun 30 12:47:07.665678 Starting /usr/local/sbin/xenstored... Jun 30 12:47:10.260509 Setting domain 0 name, domid and JSON config... Jun 30 12:47:10.260509 Done setting up Dom0 Jun 30 12:47:10.260509 Starting xenconsoled... Jun 30 12:47:10.260509 Starting QEMU as disk backend for dom0 Jun 30 12:47:10.272451 Jun 30 12:47:11.392478 Debian GNU/Linux 12 arndale-metrocentre hvc0 Jun 30 12:47:11.392552 Jun 30 12:47:11.392552 arndale-metrocentre login: [ 92.113799] sd 0:0:0:0: [sda] Synchronizing SCSI cache Jun 30 12:48:10.585800 [ 92.127740] wake enabled for irq 119 (gpx1-4) Jun 30 12:48:10.597713 [ 92.130735] wake enabled for irq 120 (gpx1-5) Jun 30 12:48:10.609746 [ 92.135218] wake enabled for irq 121 (gpx1-6) Jun 30 12:48:10.609806 [ 92.139590] wake enabled for irq 122 (gpx1-7) Jun 30 12:48:10.609853 [ 92.144049] wake enabled for irq 123 (gpx2-0) Jun 30 12:48:10.621713 [ 92.148445] wake enabled for irq 124 (gpx2-1) Jun 30 12:48:10.621773 [ 92.153235] reboot: Resô Jun 30 12:48:10.957722 Jun 30 12:48:10.957746 Jun 30 12:48:10.957811 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 12:48:10.969765 Jun 30 12:48:10.969816 CPU: Exynos5250@1000MHz Jun 30 12:48:10.969860 Jun 30 12:48:10.969898 Board: Arndale Jun 30 12:48:10.969938 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 12:48:10.969985 ready Jun 30 12:48:10.970023 DRAM: 2 GiB Jun 30 12:48:10.981687 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 12:48:10.993740 trace: enabled Jun 30 12:48:11.029701 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 12:48:11.389860 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 12:48:11.449738 In: serial Jun 30 12:48:11.449793 Out: serial Jun 30 12:48:11.449834 Err: serial Jun 30 12:48:11.449873 SCSI: ARNDALE SCSI INIT Jun 30 12:48:11.449915 Target spinup took 0 ms. Jun 30 12:48:11.461749 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 12:48:11.461811 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 12:48:11.473770 Net: Net Initialization Skipped Jun 30 12:48:11.473828 No ethernet found. Jun 30 12:48:11.473870 Hostname: arndale-metrocentre Jun 30 12:48:11.473912 Hit any key to stop autoboot: 2  1  0 Jun 30 12:48:13.405733 (Re)start USB... Jun 30 12:48:13.405790 USB0: USB EHCI 1.00 Jun 30 12:48:13.405833 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 12:48:19.009785 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 12:48:19.009858 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 12:48:19.453737 Waiting for Ethernet connection... done. Jun 30 12:48:21.049709 BOOTP broadcast 1 Jun 30 12:48:21.061680 EHCI timed out on TD - token=0x8008d80 Jun 30 12:48:25.861790 BOOTP broadcast 2 Jun 30 12:48:25.861914 DHCP client bound to address 10.149.64.44 (5006 ms) Jun 30 12:48:25.861994 Using asx0 device Jun 30 12:48:25.873736 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 12:48:25.873798 Filename 'pxelinux.0'. Jun 30 12:48:25.873846 Load address: 0x43e00000 Jun 30 12:48:25.873912 Loading: *### Jun 30 12:48:25.897688 2.2 MiB/s Jun 30 12:48:25.897736 done Jun 30 12:48:25.897774 Bytes transferred = 42430 (a5be hex) Jun 30 12:48:25.897817 missing environment variable: pxeuuid Jun 30 12:48:25.897859 Retrieving file: pxelinux.cfg/0A95402C Jun 30 12:48:25.909767 Using asx0 device Jun 30 12:48:25.909828 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 12:48:25.909878 Filename 'pxelinux.cfg/0A95402C'. Jun 30 12:48:25.921742 Load address: 0x51000000 Jun 30 12:48:25.921796 Loading: *# Jun 30 12:48:25.921837 358.4 KiB/s Jun 30 12:48:25.921876 done Jun 30 12:48:25.921913 Bytes transferred = 734 (2de hex) Jun 30 12:48:25.921955 Config file found Jun 30 12:48:25.921995 Ignoring unknown command: serial Jun 30 12:48:25.933719 1: ^Overwrite Jun 30 12:48:25.933773 Retrieving file: /osstest/tmp//arndale-metrocentre--initrd.gz Jun 30 12:48:25.933822 Using asx0 device Jun 30 12:48:25.933862 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 12:48:25.945733 Filename '/osstest/tmp//arndale-metrocentre--initrd.gz'. Jun 30 12:48:25.945793 Load address: 0x43300000 Jun 30 12:48:25.957659 Loading: *################################################################# Jun 30 12:48:26.281665 ################################################################# Jun 30 12:48:26.605660 ################################################################# Jun 30 12:48:26.929634 ################################################################# Jun 30 12:48:27.253678 ################################################################# Jun 30 12:48:27.565669 ################################################################# Jun 30 12:48:27.889673 ################################################################# Jun 30 12:48:28.213738 ################################################################# Jun 30 12:48:28.501615 ################################################################# Jun 30 12:48:28.765632 ################################################################# Jun 30 12:48:29.089622 ################################################################# Jun 30 12:48:29.413636 ################################################################# Jun 30 12:48:29.737622 ################################################################# Jun 30 12:48:30.025624 ################################################################# Jun 30 12:48:30.265619 ################################################################# Jun 30 12:48:30.505616 ################################################################# Jun 30 12:48:30.757617 ################################################################# Jun 30 12:48:30.997627 ################################################################# Jun 30 12:48:31.237626 ################################################################# Jun 30 12:48:31.489654 ################################################################# Jun 30 12:48:31.777628 ################################################################# Jun 30 12:48:32.101662 ################################################################# Jun 30 12:48:32.413626 ################################################################# Jun 30 12:48:32.689638 ################################################################# Jun 30 12:48:33.013687 ################################################################# Jun 30 12:48:33.337696 ################################################################# Jun 30 12:48:33.601712 ################################################################# Jun 30 12:48:33.892529 ###################################### Jun 30 12:48:34.072537 3 MiB/s Jun 30 12:48:34.072537 done Jun 30 12:48:34.072537 Bytes transferred = 26310352 (19176d0 hex) Jun 30 12:48:34.084624 Retrieving file: /osstest/debian-installer/armhf/2024-03-26-bookworm/linux Jun 30 12:48:34.096587 Using asx0 device Jun 30 12:48:34.096587 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 12:48:34.096587 Filename '/osstest/debian-installer/armhf/2024-03-26-bookworm/linux'. Jun 30 12:48:34.108559 Load address: 0x42000000 Jun 30 12:48:34.108559 Loading: *################################################################# Jun 30 12:48:34.436550 ################################################################# Jun 30 12:48:34.760749 ################################################################# Jun 30 12:48:35.084728 ################################################################# Jun 30 12:48:35.420519 ################################################################# Jun 30 12:48:35.684472 ############################################# Jun 30 12:48:35.912576 2.8 MiB/s Jun 30 12:48:35.912576 done Jun 30 12:48:35.912576 Bytes transferred = 5423616 (52c200 hex) Jun 30 12:48:35.912576 append: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-metrocentre url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=43427 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-metrocentre--initrd.gz --- console=ttySAC2,115200n8 Jun 30 12:48:35.960589 Retrieving file: /osstest/debian-installer/armhf/2024-03-26-bookworm/dtbs/exynos5250-arndale.dtb Jun 30 12:48:35.960589 Using asx0 device Jun 30 12:48:35.960589 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 12:48:35.972588 Filename '/osstest/debian-installer/armhf/2024-03-26-bookworm/dtbs/exynos5250-arndale.dtb'. Jun 30 12:48:35.984698 Load address: 0x43000000 Jun 30 12:48:35.984755 Loading: *#### Jun 30 12:48:35.996702 2.5 MiB/s Jun 30 12:48:35.996756 done Jun 30 12:48:35.996794 Bytes transferred = 46686 (b65e hex) Jun 30 12:48:36.008775 Kernel image @ 0x42000000 [ 0x000000 - 0x52c200 ] Jun 30 12:48:36.008835 ## Flattened Device Tree blob at 43000000 Jun 30 12:48:36.008880 Booting using the fdt blob at 0x43000000 Jun 30 12:48:36.020738 Loading Ramdisk to 4e6e8000, end 4ffff6d0 ... OK Jun 30 12:48:36.437812 Loading Device Tree to 4e6d9000, end 4e6e765d ... OK Jun 30 12:48:36.438524 Jun 30 12:48:36.449770 Starting kernel ...(fake run for tracing) Jun 30 12:48:36.449830 Jun 30 12:48:36.449868 Jun 30 12:48:36.461763 Starting kernel ... Jun 30 12:48:36.461819 Jun 30 12:48:36.461857 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 12:48:42.513814 [ 0.000000] Linux version 6.1.0-18-armmp (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.76-1 (2024-02-01) Jun 30 12:48:42.525815 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 30 12:48:42.537795 [ 0.000000] CPU: div instructions available: patching division code Jun 30 12:48:42.537859 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 12:48:42.549802 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 12:48:42.549872 [ 0.000000] Memory policy: Data cache writealloc Jun 30 12:48:42.561805 [ 0.000000] efi: UEFI not found. Jun 30 12:48:42.561863 [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 Jun 30 12:48:42.561910 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 12:48:42.573793 [ 0.000000] Zone ranges: Jun 30 12:48:42.573849 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Jun 30 12:48:42.585786 [ 0.000000] Normal empty Jun 30 12:48:42.585844 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Jun 30 12:48:42.585893 [ 0.000000] Movable zone start for each node Jun 30 12:48:42.597681 [ 0.000000] Early memory node ranges Jun 30 12:48:42.597713 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 12:48:42.597740 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 12:48:42.609809 [ 0.000000] percpu: Embedded 18 pages/cpu s41620 r8192 d23916 u73728 Jun 30 12:48:42.621785 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Jun 30 12:48:42.621849 [ 0.000000] Kernel command line: vga=normal auto=true preseed hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text hostname=arndale-metrocentre url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=43427 domain=test-lab.xenproject.org console=ttySAC2,115200n8 initrd=/osstest/tmp//arndale-metrocentre--initrd.gz --- console=ttySAC2,115200n8 Jun 30 12:48:42.669805 [ 0.000000] Unknown kernel command line parameters "preseed --- vga=normal auto=true hw-detect/load_firmware=false DEBCONF_DEBUG=5 DEBIAN_FRONTEND=text url=osstest.test-lab.xenproject.org/~osstest/osstest/arndale-metrocentre_preseed netcfg/dhcp_timeout=150 netcfg/link_wait_timeout=10 netcfg/choose_interface=eth0 priority=critical log_host=10.149.64.3 log_port=43427 domain=test-lab.xenproject.org", will be passed to user space. Jun 30 12:48:42.705811 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Jun 30 12:48:42.717795 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 12:48:42.717862 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Jun 30 12:48:42.729790 [ 0.000000] Memory: 2015996K/2097152K available (11264K kernel code, 1696K rwdata, 3716K rodata, 2048K init, 378K bss, 64772K reserved, 16384K cma-reserved, 1294332K highmem) Jun 30 12:48:42.741812 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 12:48:42.753792 [ 0.000000] ftrace: allocating 39582 entries in 117 pages Jun 30 12:48:42.753853 [ 0.000000] ftrace: allocated 116 pages with 4 groups Jun 30 12:48:42.765796 [ 0.000000] trace event string verifier disabled Jun 30 12:48:42.765855 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 12:48:42.765901 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Jun 30 12:48:42.777798 [ 0.000000] Rude variant of Tasks RCU enabled. Jun 30 12:48:42.777857 [ 0.000000] Tracing variant of Tasks RCU enabled. Jun 30 12:48:42.789795 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Jun 30 12:48:42.789862 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 12:48:42.801802 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 12:48:42.801863 [ 0.000000] GIC: Using split EOI/Deactivate mode Jun 30 12:48:42.813797 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 12:48:42.813860 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 12:48:42.825790 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Jun 30 12:48:42.825852 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Jun 30 12:48:42.837801 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Jun 30 12:48:42.849798 [ 0.000019] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Jun 30 12:48:42.849865 [ 0.002638] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Jun 30 12:48:42.861799 [ 0.002652] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 12:48:42.873788 [ 0.002667] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 12:48:42.873857 [ 0.002679] Ignoring duplicate/late registration of read_current_timer delay Jun 30 12:48:42.885813 [ 0.003046] Console: colour dummy device 80x30 Jun 30 12:48:42.885873 [ 0.003087] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Jun 30 12:48:42.897810 [ 0.003101] CPU: Testing write buffer coherency: ok Jun 30 12:48:42.909787 [ 0.003142] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 12:48:42.909859 [ 0.003150] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 12:48:42.921805 [ 0.003157] pid_max: default: 32768 minimum: 301 Jun 30 12:48:42.921865 [ 0.003515] LSM: Security Framework initializing Jun 30 12:48:42.933800 [ 0.003585] landlock: Up and running. Jun 30 12:48:42.933857 [ 0.003590] Yama: disabled by default; enable with sysctl kernel.yama.* Jun 30 12:48:42.945776 [ 0.003777] AppArmor: AppArmor initialized Jun 30 12:48:42.945858 [ 0.003789] TOMOYO Linux initialized Jun 30 12:48:42.945914 [ 0.003831] LSM support for eBPF active Jun 30 12:48:42.945958 [ 0.004076] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 12:48:42.957804 [ 0.004090] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 12:48:42.969800 [ 0.005526] /cpus/cpu@0 missing clock-frequency property Jun 30 12:48:42.969860 [ 0.005554] /cpus/cpu@1 missing clock-frequency property Jun 30 12:48:42.981788 [ 0.005567] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 12:48:42.981850 [ 0.006522] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 12:48:42.993796 [ 0.006529] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 12:48:42.993857 [ 0.006632] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 12:48:43.005798 [ 0.006638] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 12:48:43.005861 [ 0.006786] Setting up static identity map for 0x40300000 - 0x403000ac Jun 30 12:48:43.017799 [ 0.007952] rcu: Hierarchical SRCU implementation. Jun 30 12:48:43.017859 [ 0.007957] rcu: Max phase no-delay instances is 1000. Jun 30 12:48:43.029795 [ 0.010100] EFI services will not be available. Jun 30 12:48:43.029855 [ 0.010449] smp: Bringing up secondary CPUs ... Jun 30 12:48:43.029902 [ 0.011195] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 12:48:43.041763 [ 0.011207] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 12:48:43.053793 [ 0.011339] smp: Brought up 1 node, 2 CPUs Jun 30 12:48:43.053853 [ 0.011347] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 12:48:43.065796 [ 0.011355] CPU: All CPU(s) started in HYP mode. Jun 30 12:48:43.065858 [ 0.011359] CPU: Virtualization extensions available. Jun 30 12:48:43.065906 [ 0.012022] devtmpfs: initialized Jun 30 12:48:43.077786 [ 0.023076] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 12:48:43.077855 [ 0.023329] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Jun 30 12:48:43.089794 [ 0.023354] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 12:48:43.101795 [ 0.023829] pinctrl core: initialized pinctrl subsystem Jun 30 12:48:43.101856 [ 0.024558] DMI not present or invalid. Jun 30 12:48:43.101901 [ 0.025234] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 12:48:43.113803 [ 0.030633] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 12:48:43.113867 [ 0.032198] audit: initializing netlink subsys (disabled) Jun 30 12:48:43.125795 [ 0.032398] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1 Jun 30 12:48:43.137814 [ 0.033565] thermal_sys: Registered thermal governor 'fair_share' Jun 30 12:48:43.137878 [ 0.033572] thermal_sys: Registered thermal governor 'bang_bang' Jun 30 12:48:43.149659 [ 0.033576] thermal_sys: Registered thermal governor 'step_wise' Jun 30 12:48:43.149705 [ 0.033581] thermal_sys: Registered thermal governor 'user_space' Jun 30 12:48:43.161779 [ 0.033585] thermal_sys: Registered thermal governor 'power_allocator' Jun 30 12:48:43.161843 [ 0.033951] No ATAGs? Jun 30 12:48:43.161885 [ 0.034020] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jun 30 12:48:43.173805 [ 0.034029] hw-breakpoint: maximum watchpoint size is 8 bytes. Jun 30 12:48:43.173866 [ 0.035115] Serial: AMBA PL011 UART driver Jun 30 12:48:43.185794 [ 0.091442] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Jun 30 12:48:43.185864 [ 0.102676] iommu: Default domain type: Translated Jun 30 12:48:43.197792 [ 0.102685] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 12:48:43.197854 [ 0.103646] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Jun 30 12:48:43.209803 [ 0.104218] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 12:48:43.209863 [ 0.104230] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 12:48:43.221805 [ 0.104757] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 12:48:43.233780 [ 0.104787] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 12:48:43.233851 [ 0.104970] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 12:48:43.245775 [ 0.105331] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 12:48:43.245835 [ 0.105341] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 12:48:43.257790 [ 0.105750] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 12:48:43.257851 [ 0.106037] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 12:48:43.257898 [ 0.106047] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 12:48:43.269803 [ 0.106323] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 12:48:43.269864 [ 0.106423] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 12:48:43.281740 [ 0.106432] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 12:48:43.281815 [ 0.106630] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 12:48:43.293758 [ 0.106829] pps_core: LinuxPPS API ver. 1 registered Jun 30 12:48:43.293819 [ 0.106834] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 12:48:43.305764 [ 0.106850] PTP clock support registered Jun 30 12:48:43.305821 [ 0.108436] NetLabel: Initializing Jun 30 12:48:43.305865 [ 0.108442] NetLabel: domain hash size = 128 Jun 30 12:48:43.317759 [ 0.108447] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Jun 30 12:48:43.317821 [ 0.108501] NetLabel: unlabeled traffic allowed by default Jun 30 12:48:43.329754 [ 0.108666] vgaarb: loaded Jun 30 12:48:43.329810 [ 0.109276] clocksource: Switched to clocksource mct-frc Jun 30 12:48:43.329858 [ 0.109906] VFS: Disk quotas dquot_6.6.0 Jun 30 12:48:43.341750 [ 0.109993] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jun 30 12:48:43.341814 [ 0.110729] AppArmor: AppArmor Filesystem Enabled Jun 30 12:48:43.353765 [ 0.120644] NET: Registered PF_INET protocol family Jun 30 12:48:43.353825 [ 0.120846] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Jun 30 12:48:43.365762 [ 0.122321] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 12:48:43.365830 [ 0.122423] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 12:48:43.377661 [ 0.122448] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Jun 30 12:48:43.389830 [ 0.122549] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Jun 30 12:48:43.389896 [ 0.122779] TCP: Hash tables configured (established 8192 bind 8192) Jun 30 12:48:43.401764 [ 0.122995] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Jun 30 12:48:43.401832 [ 0.123100] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 12:48:43.413786 [ 0.123141] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 12:48:43.425750 [ 0.123336] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 12:48:43.425813 [ 0.123372] NET: Registered PF_XDP protocol family Jun 30 12:48:43.425860 [ 0.123383] PCI: CLS 0 bytes, default 64 Jun 30 12:48:43.437766 [ 0.124499] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Jun 30 12:48:43.437834 [ 0.124866] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Jun 30 12:48:43.449750 [ 0.129662] Trying to unpack rootfs image as initramfs... Jun 30 12:48:43.461765 [ 0.183634] Initialise system trusted keyrings Jun 30 12:48:43.461825 [ 0.183732] Key type blacklist registered Jun 30 12:48:43.461870 [ 0.184524] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Jun 30 12:48:43.473756 [ 0.191996] zbud: loaded Jun 30 12:48:43.473811 [ 0.193239] integrity: Platform Keyring initialized Jun 30 12:48:43.473858 [ 0.193305] integrity: Machine keyring initialized Jun 30 12:48:43.485758 [ 0.193315] Key type asymmetric registered Jun 30 12:48:43.485816 [ 0.193322] Asymmetric key parser 'x509' registered Jun 30 12:48:43.497750 [ 1.504657] Freeing initrd memory: 25696K Jun 30 12:48:43.497809 [ 1.516151] alg: self-tests for CTR-KDF (hmac(sha256)) passed Jun 30 12:48:43.497858 [ 1.516442] bounce: pool size: 64 pages Jun 30 12:48:43.509796 [ 1.516606] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Jun 30 12:48:43.509864 [ 1.516773] io scheduler mq-deadline registered Jun 30 12:48:43.521811 [ 1.522009] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Jun 30 12:48:43.521881 [ 1.542940] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 12:48:43.533679 [ 1.542952] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 12:48:43.545803 [ 1.545256] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 12:48:43.545870 [ 1.545302] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 12:48:43.557801 [ 1.546095] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 12:48:43.569805 [ 1.546104] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 12:48:43.581787 [ 1.546904] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 12:48:43.581855 [ 1.546912] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 12:48:43.593736 [ 1.549266] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 12:48:43.605772 [ 1.552116] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 12:48:43.605833 [ 1.554837] Serial: AMBA driver Jun 30 12:48:43.617749 [ 1.555079] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 12:48:43.617820 [ 1.555553] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 12:48:43.629764 [ 1.556018] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 12:48:43.641760 [ 2.686914] printk: console [ttySAC2] enabled Jun 30 12:48:43.641819 [ 2.691729] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Jun 30 12:48:43.653748 [ 2.702429] STM32 USART driver initialized Jun 30 12:48:43.653807 [ 2.716501] mousedev: PS/2 mouse device common for all mice Jun 30 12:48:43.677711 [ 2.747733] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 12:48:43.701760 [ 2.756362] s5m-rtc s5m-rtc: setting system clock to 2000-01-02T00:02:28 UTC (946771348) Jun 30 12:48:43.713673 [ 2.766150] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Jun 30 12:48:43.725783 [ 2.773598] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 12:48:43.725868 [ 2.781600] NET: Registered PF_INET6 protocol family Jun 30 12:48:43.737753 [ 2.795393] Segment Routing with IPv6 Jun 30 12:48:43.749781 [ 2.797681] In-situ OAM (IOAM) with IPv6 Jun 30 12:48:43.749839 [ 2.801651] mip6: Mobile IPv6 Jun 30 12:48:43.761679 [ 2.804455] NET: Registered PF_PACKET protocol family Jun 30 12:48:43.761713 [ 2.809650] mpls_gso: MPLS GSO support Jun 30 12:48:43.761738 [ 2.813891] ThumbEE CPU extension supported. Jun 30 12:48:43.773786 [ 2.817552] Registering SWP/SWPB emulation handler Jun 30 12:48:43.773847 [ 2.822710] registered taskstats version 1 Jun 30 12:48:43.773892 [ 2.826368] Loading compiled-in X.509 certificates Jun 30 12:48:43.785720 [ 3.283006] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Jun 30 12:48:44.241832 [ 3.290345] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Jun 30 12:48:44.253792 [ 3.301439] zswap: loaded using pool lzo/zbud Jun 30 12:48:44.253850 [ 3.305386] Key type .fscrypt registered Jun 30 12:48:44.265755 [ 3.308629] Key type fscrypt-provisioning registered Jun 30 12:48:44.265816 [ 3.322458] Key type encrypted registered Jun 30 12:48:44.277782 [ 3.325007] AppArmor: AppArmor sha1 policy hashing enabled Jun 30 12:48:44.277843 [ 3.330547] ima: No TPM chip found, activating TPM-bypass! Jun 30 12:48:44.289796 [ 3.336023] ima: Allocated hash algorithm: sha256 Jun 30 12:48:44.289855 [ 3.340691] ima: No architecture policies found Jun 30 12:48:44.301798 [ 3.345320] evm: Initialising EVM extended attributes: Jun 30 12:48:44.301860 [ 3.350283] evm: security.selinux Jun 30 12:48:44.301904 [ 3.353572] evm: security.SMACK64 (disabled) Jun 30 12:48:44.313800 [ 3.357823] evm: security.SMACK64EXEC (disabled) Jun 30 12:48:44.313860 [ 3.362423] evm: security.SMACK64TRANSMUTE (disabled) Jun 30 12:48:44.313907 [ 3.367457] evm: security.SMACK64MMAP (disabled) Jun 30 12:48:44.325792 [ 3.372057] evm: security.apparmor Jun 30 12:48:44.325849 [ 3.375442] evm: security.ima Jun 30 12:48:44.325892 [ 3.378398] evm: security.capability Jun 30 12:48:44.337728 [ 3.381953] evm: HMAC attrs: 0x1 Jun 30 12:48:44.337786 [ 3.965644] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 12:48:44.925783 [ 3.991925] Freeing unused kernel image (initmem) memory: 2048K Jun 30 12:48:44.949793 [ 3.996788] Checked W+X mappings: passed, no W+X pages found Jun 30 12:48:44.949854 [ 4.002050] Run /init as init process Jun 30 12:48:44.961729 [ 4.554151] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 12:48:45.513739 [ 4.626726] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 12:48:45.585752 [ 4.654319] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 12:48:45.609792 [ 4.663733] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 12:48:45.621815 [ 4.667827] usbcore: registered new interface driver usbfs Jun 30 12:48:45.633744 [ 4.711432] usbcore: registered new interface driver hub Jun 30 12:48:45.669762 [ 4.715367] usbcore: registered new device driver usb Jun 30 12:48:45.669821 [ 4.726190] phy phy-12130000.phy.1: phy_power_on was called before phy_init Jun 30 12:48:45.681823 [ 4.784069] phy phy-12130000.phy.1: phy_power_on was called before phy_init Jun 30 12:48:45.741800 [ 4.791764] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 12:48:45.741860 [ 4.796995] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 12:48:45.753775 [ 4.806964] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Jun 30 12:48:45.765763 [ 4.824606] exynos-ohci 12120000.usb: USB Host Controller Jun 30 12:48:45.777758 [ 4.850233] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Jun 30 12:48:45.813788 [ 4.857513] usb3503 usb-hub: switched to HUB mode Jun 30 12:48:45.813885 [ 4.861129] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 12:48:45.813937 [ 4.867372] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Jun 30 12:48:45.825727 [ 4.876488] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Jun 30 12:48:45.837698 [ 4.897399] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 12:48:45.849643 [ 4.902400] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 12:48:45.861661 [ 4.910229] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 12:48:45.873660 [ 4.917420] usb usb1: Product: EHCI Host Controller Jun 30 12:48:45.873692 [ 4.922271] usb usb1: Manufacturer: Linux 6.1.0-18-armmp ehci_hcd Jun 30 12:48:45.885708 [ 4.928348] usb usb1: SerialNumber: 12110000.usb Jun 30 12:48:45.885768 [ 4.942771] hub 1-0:1.0: USB hub found Jun 30 12:48:45.897758 [ 4.946443] hub 1-0:1.0: 3 ports detected Jun 30 12:48:45.897815 [ 4.950060] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Jun 30 12:48:45.909772 [ 4.957345] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 12:48:45.921755 [ 4.964530] usb usb2: Product: USB Host Controller Jun 30 12:48:45.921815 [ 4.969313] usb usb2: Manufacturer: Linux 6.1.0-18-armmp ohci_hcd Jun 30 12:48:45.921865 [ 4.975383] usb usb2: SerialNumber: 12120000.usb Jun 30 12:48:45.933715 [ 4.996076] hub 2-0:1.0: USB hub found Jun 30 12:48:45.945708 [ 4.999298] hub 2-0:1.0: 3 ports detected Jun 30 12:48:45.957771 [ 5.209156] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 12:48:46.161750 [ 5.213215] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 12:48:46.173766 [ 5.220871] usb 1-3: new high-speed USB device number 2 using exynos-ehci Jun 30 12:48:46.173829 [ 5.228174] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 Jun 30 12:48:46.185778 [ 5.237140] xhci-hcd xhci-hcd.2.auto: irq 108, io mem 0x12000000 Jun 30 12:48:46.197728 [ 5.243163] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 12:48:46.197788 [ 5.248445] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 12:48:46.209770 [ 5.256078] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 12:48:46.209857 [ 5.262731] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 12:48:46.221773 [ 5.270831] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 12:48:46.233759 [ 5.278036] usb usb3: Product: xHCI Host Controller Jun 30 12:48:46.233818 [ 5.282891] usb usb3: Manufacturer: Linux 6.1.0-18-armmp xhci-hcd Jun 30 12:48:46.245752 [ 5.288962] usb usb3: SerialNumber: xhci-hcd.2.auto Jun 30 12:48:46.245813 [ 5.294421] hub 3-0:1.0: USB hub found Jun 30 12:48:46.245858 [ 5.297606] hub 3-0:1.0: 1 port detected Jun 30 12:48:46.257756 [ 5.302104] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 12:48:46.257825 [ 5.309670] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Jun 30 12:48:46.269771 [ 5.317789] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 12:48:46.281755 [ 5.324986] usb usb4: Product: xHCI Host Controller Jun 30 12:48:46.281814 [ 5.329856] usb usb4: Manufacturer: Linux 6.1.0-18-armmp xhci-hcd Jun 30 12:48:46.281864 [ 5.335924] usb usb4: SerialNumber: xhci-hcd.2.auto Jun 30 12:48:46.293754 [ 5.341457] hub 4-0:1.0: USB hub found Jun 30 12:48:46.293811 [ 5.344526] hub 4-0:1.0: 1 port detected Jun 30 12:48:46.305687 [ 5.389761] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Jun 30 12:48:46.353758 [ 5.396616] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jun 30 12:48:46.353824 [ 5.405097] hub 1-3:1.0: USB hub found Jun 30 12:48:46.353869 [ 5.414483] hub 1-3:1.0: 3 ports detected Jun 30 12:48:46.365741 Starting system log daemon: syslogd, klogd. Jun 30 12:48:46.449688 /var/run/utmp: No such file or directory Jun 30 12:48:48.300567 [?1h=(B   Jun 30 12:48:48.348583  Jun 30 12:48:48.348583 [  (-*) ][ Jan 02  0:02 ] Jun 30 12:48:48.376633 [  (0*start) ][ Jan 02  0:02 ] Jun 30 12:48:48.376633 [  (0*start) ][ Jan 02  0:02 ] Jun 30 12:48:48.388623 [  (0*start) ][ Jan 02  0:02 ] Jun 30 12:48:48.400605 [  (0*start) ][ Jan 02  0:02 ]                        [  (0*start) ][ Jan 02  0:02 ][  (0*start) ][ Jan 02  0:02 ] Jun 30 12:48:48.460565 [ 0- start  (2*shell) ][ Jan 02  0:02 ] Jun 30 12:48:48.472555 [ 0- start  (2*shell) ][ Jan 02  0:02 ] Jun 30 12:48:48.484593 [ 0- start  (2*shell) ][ Jan 02  0:02 ] Jun 30 12:48:48.508558 [ 0- start  (2*shell) ][ Jan 02  0:02 ]                        [ 0- start  (2*shell) ][ Jan 02  0:02 ][ 0- start  (2*shell) ][ Jan 02  0:02 ] Jun 30 12:48:48.560617 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:02 ] Jun 30 12:48:48.572611 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:02 ] Jun 30 12:48:48.584612 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:02 ] Jun 30 12:48:48.596608 [ 0 start 2- shell  (3*shell) ][ Jan 02  0:02 ]                        [ 0 start 2- shell  (3*shell) ][ Jan 02  0:02 ][ 0 start 2- shell  (3*shell) ][ Jan 02  0:02 ] Jun 30 12:48:48.656608 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:02 ] Jun 30 12:48:48.668577 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:02 ] Jun 30 12:48:48.680626 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:02 ] Jun 30 12:48:48.692612 [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:02 ]                        [ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:02 ][ 0 start 2 shell 3- shell  (4*log) ][ Jan 02  0:02 ] Jun 30 12:48:48.752575 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:02 ] Jun 30 12:48:48.764566 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:02 ] Jun 30 12:48:48.776596 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:02 ] Jun 30 12:48:48.800568 [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:02 ]                        [ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:02 ][ 0 start  (1*shell) 2 shell 3 shell 4- log ][ Jan 02  0:02 ] Jun 30 12:48:48.848532 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:02 ] Jun 30 12:48:48.860533 [ 0 start  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:02 ] Jun 30 12:48:48.884513 [  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:02 ] Jun 30 12:48:49.340537 Detecting network hardware ... 2%... 95%... 100% Jun 30 12:48:51.080748 Detecting link on eth0; please wait... ... 0%... 10%... 20% Jun 30 12:48:55.993739 Waiting for link-local address... ... 8%... 16%... 25%... 33%... 41%... 100% Jun 30 12:48:57.277606 Attempting IPv6 autoconfiguration... ... 8%... 16%... 25%... 33%... 41%... 50%... 66%... 75%... 83%... 91%... 100% Jun 30 12:49:03.349696 Configuring the network with DHCP ... 0%... 100% Jun 30 12:49:06.517666 Checking the Debian archive mirror ... 25%... 50%... 75%... 100% Jun 30 12:49:14.797723 [  (1*installer) 2 shell 3 shell 4- log ][ Jan 02  0:03 ] Loading additional components ... 0%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Jun 30 12:49:48.829651 Setting up the clock ... 0%... 3%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 12:49 ]... 100% Jun 30 12:49:51.637688 Loading additional components ... 50%... 100% Jun 30 12:49:53.320546 Detecting disks and all other hardware ... 2%... 95%... 100% Jun 30 12:49:57.308505 [  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 12:50 ] Loading additional components ... 5%... 10%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%... 100% Jun 30 12:50:06.149692 Loading additional components ... 25%... 50%... 75%... 100% Jun 30 12:50:08.552404 Starting up the partitioner ... 4%... 13%... 21%... 30%... 43%... 52%... 60%... 73%... 82%... 91%... 100% Jun 30 12:50:19.445724 Guided partitioning ... 16%... 33%... 50%... 66%... 83%... 100% Jun 30 12:50:28.033640 Starting up the partitioner ... 4%... 12%... 20%... 32%... 40%... 52%... 60%... 72%... 80%... 92%... 100% Jun 30 12:50:38.208445 Partitions formatting ... 33% Jun 30 12:50:49.457682 Partitions formatting Jun 30 12:50:59.029733 Partitions formatting [  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 12:51 ] Installing the base system ... 0%... 17%... 20%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 12:52 ]... 30%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 12:53 ]... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 12:54 ]... 48%... 50%...  Jun 30 12:54:49.764705  60%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 12:55 ]... 70%... 79%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 12:56 ]... 83%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 12:57 ][  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 12:58 ]... 91%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 12:59 ]... 100% Jun 30 12:59:19.057659 Configuring apt ... 7%... 14%... 14%... 21%... 35%... 42%... 50%... 61%... 70%. Jun 30 12:59:56.605715 ... 82%... 92%... 100% Jun 30 12:59:59.197712 [  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 13:00 ] Select and install software ... 1%... 10%... 13%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 13:01 ]... 20%... 30%... 40%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 13:02 ]... 50%... Jun 30 13:02:49.053608 . 60%... 70%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 13:03 ]... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 13:04 ]... 88%... 90%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 13:05 ]... 94%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 13:06 ]... 100% Jun 30 13:06:06.336859 Finishing the installation ... 4%... 12%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 13:07 ]... 16%... 20%... 32%... 40%... 44%... Jun 30 13:07:53.048489  52%... 60%... 72%... 80%[  (1*installer) 2 shell 3 shell 4- log ][ Jun 30 13:08 ]... 92% The system is going down NOW! Sent SIGKILL to all processes Jun 30 13:08:04.073757 Requesting system reboot Jun 30 13:08:04.073829 [ 1164.149050] reboot: Reó Jun 30 13:08:05.429681 Jun 30 13:08:05.429702 Jun 30 13:08:05.429742 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 13:08:05.429770 Jun 30 13:08:05.429791 CPU: Exynos5250@1000MHz Jun 30 13:08:05.441734 Jun 30 13:08:05.441786 Board: Arndale Jun 30 13:08:05.441828 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 13:08:05.441876 ready Jun 30 13:08:05.441915 DRAM: 2 GiB Jun 30 13:08:05.441955 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 13:08:05.465694 trace: enabled Jun 30 13:08:05.501686 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 13:08:05.861706 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 13:08:05.921749 In: serial Jun 30 13:08:05.921804 Out: serial Jun 30 13:08:05.921845 Err: serial Jun 30 13:08:05.921885 SCSI: ARNDALE SCSI INIT Jun 30 13:08:05.921928 Target spinup took 0 ms. Jun 30 13:08:05.933743 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 13:08:05.933805 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 13:08:05.945734 Net: Net Initialization Skipped Jun 30 13:08:05.945801 No ethernet found. Jun 30 13:08:05.945844 Hostname: arndale-metrocentre Jun 30 13:08:05.945887 Hit any key to stop autoboot: 2  1  0 Jun 30 13:08:07.869731 (Re)start USB... Jun 30 13:08:07.869792 USB0: USB EHCI 1.00 Jun 30 13:08:07.881707 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 13:08:13.473799 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 13:08:13.485711 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 13:08:13.929744 Waiting for Ethernet connection... done. Jun 30 13:08:15.577694 BOOTP broadcast 1 Jun 30 13:08:15.577753 BOOTP broadcast 2 Jun 30 13:08:17.113634 DHCP client bound to address 10.149.64.44 (1608 ms) Jun 30 13:08:17.125759 Using asx0 device Jun 30 13:08:17.125815 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 13:08:17.125865 Filename 'pxelinux.0'. Jun 30 13:08:17.125908 Load address: 0x43e00000 Jun 30 13:08:17.137679 Loading: *### Jun 30 13:08:17.149650 2.5 MiB/s Jun 30 13:08:17.149680 done Jun 30 13:08:17.149702 Bytes transferred = 42430 (a5be hex) Jun 30 13:08:17.149727 missing environment variable: pxeuuid Jun 30 13:08:17.161723 Retrieving file: pxelinux.cfg/0A95402C Jun 30 13:08:17.161808 Using asx0 device Jun 30 13:08:17.161868 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 13:08:17.161919 Filename 'pxelinux.cfg/0A95402C'. Jun 30 13:08:17.173772 Load address: 0x51000000 Jun 30 13:08:17.173828 Loading: *# Jun 30 13:08:17.173871 31.3 KiB/s Jun 30 13:08:17.173911 done Jun 30 13:08:17.173949 Bytes transferred = 65 (41 hex) Jun 30 13:08:17.173993 Config file found Jun 30 13:08:17.174033 Ignoring unknown command: serial Jun 30 13:08:17.185685 1: local Jun 30 13:08:17.185685 scanning bus for devices... Jun 30 13:08:17.185685 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 13:08:17.209741 Type: Hard Disk Jun 30 13:08:17.209801 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 13:08:17.221771 Found 1 device(s). Jun 30 13:08:17.221826 Jun 30 13:08:17.221865 SCSI device 0: Jun 30 13:08:17.221939 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 13:08:17.233751 Type: Hard Disk Jun 30 13:08:17.233806 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 13:08:17.233855 ... is now current device Jun 30 13:08:17.245713 Scanning scsi 0... Jun 30 13:08:17.245767 Found U-Boot script /boot.scr Jun 30 13:08:17.353703 641 bytes read in 45 ms (13.7 KiB/s) Jun 30 13:08:17.413716 ## Executing script at 50000000 Jun 30 13:08:17.413773 Loading dtbs/exynos5250-arndale.dtb Jun 30 13:08:17.413818 46686 bytes read in 1172 ms (38.1 KiB/s) Jun 30 13:08:18.565742 Loading vmlinuz-6.1.0-22-armmp-lpae Jun 30 13:08:18.577684 5505536 bytes read in 178 ms (29.5 MiB/s) Jun 30 13:08:18.757726 Loading initrd.img-6.1.0-22-armmp-lpae Jun 30 13:08:18.757788 25721047 bytes read in 1887 ms (13 MiB/s) Jun 30 13:08:20.585749 Booting Jun 30 13:08:20.585879 Kernel image @ 0x42000000 [ 0x000000 - 0x540200 ] Jun 30 13:08:20.597773 ## Flattened Device Tree blob at 43000000 Jun 30 13:08:20.597831 Booting using the fdt blob at 0x43000000 Jun 30 13:08:20.597877 Loading Ramdisk to 4e778000, end 4ffff8d7 ... OK Jun 30 13:08:21.017745 Loading Device Tree to 4e769000, end 4e77765d ... OK Jun 30 13:08:21.017829 Jun 30 13:08:21.029712 Starting kernel ...(fake run for tracing) Jun 30 13:08:21.029772 Jun 30 13:08:21.029810 Jun 30 13:08:21.029847 Starting kernel ... Jun 30 13:08:21.041685 Jun 30 13:08:21.041712 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 13:08:27.185821 [ 0.000000] Linux version 6.1.0-22-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.94-1 (2024-06-21) Jun 30 13:08:27.197761 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=30c5387d Jun 30 13:08:27.209774 [ 0.000000] CPU: div instructions available: patching division code Jun 30 13:08:27.209837 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 13:08:27.221790 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 13:08:27.233731 [ 0.000000] Memory policy: Data cache writealloc Jun 30 13:08:27.233784 [ 0.000000] efi: UEFI not found. Jun 30 13:08:27.233827 [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000 Jun 30 13:08:27.245760 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 13:08:27.245818 [ 0.000000] Zone ranges: Jun 30 13:08:27.245861 [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] Jun 30 13:08:27.257745 [ 0.000000] Normal empty Jun 30 13:08:27.257802 [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] Jun 30 13:08:27.269744 [ 0.000000] Movable zone start for each node Jun 30 13:08:27.269804 [ 0.000000] Early memory node ranges Jun 30 13:08:27.269848 [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 13:08:27.281749 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] Jun 30 13:08:27.281812 [ 0.000000] percpu: Embedded 18 pages/cpu s44756 r8192 d20780 u73728 Jun 30 13:08:27.293753 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 Jun 30 13:08:27.293817 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=ttySAC2,115200n8 Jun 30 13:08:27.305729 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Jun 30 13:08:27.317760 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 13:08:27.329776 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off Jun 30 13:08:27.329835 [ 0.000000] Memory: 2015520K/2097152K available (12288K kernel code, 1714K rwdata, 3748K rodata, 2048K init, 382K bss, 65248K reserved, 16384K cma-reserved, 1294332K highmem) Jun 30 13:08:27.341783 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 13:08:27.353750 [ 0.000000] ftrace: allocating 39982 entries in 118 pages Jun 30 13:08:27.353848 [ 0.000000] ftrace: allocated 118 pages with 5 groups Jun 30 13:08:27.365777 [ 0.000000] trace event string verifier disabled Jun 30 13:08:27.365836 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 13:08:27.377770 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Jun 30 13:08:27.377835 [ 0.000000] Rude variant of Tasks RCU enabled. Jun 30 13:08:27.377883 [ 0.000000] Tracing variant of Tasks RCU enabled. Jun 30 13:08:27.389777 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Jun 30 13:08:27.401771 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 13:08:27.401836 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 13:08:27.413749 [ 0.000000] GIC: Using split EOI/Deactivate mode Jun 30 13:08:27.413782 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 13:08:27.425760 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 13:08:27.425824 [ 0.000000] Switching to timer-based delay loop, resolution 41ns Jun 30 13:08:27.425874 [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Jun 30 13:08:27.437771 [ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Jun 30 13:08:27.449781 [ 0.000019] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 Jun 30 13:08:27.461767 [ 0.002638] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Jun 30 13:08:27.461830 [ 0.002652] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 13:08:27.473790 [ 0.002667] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 13:08:27.485786 [ 0.002678] Ignoring duplicate/late registration of read_current_timer delay Jun 30 13:08:27.485850 [ 0.003043] Console: colour dummy device 80x30 Jun 30 13:08:27.497776 [ 0.003083] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Jun 30 13:08:27.497850 [ 0.003096] CPU: Testing write buffer coherency: ok Jun 30 13:08:27.509777 [ 0.003139] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 13:08:27.521772 [ 0.003147] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 13:08:27.521836 [ 0.003153] pid_max: default: 32768 minimum: 301 Jun 30 13:08:27.533757 [ 0.003509] LSM: Security Framework initializing Jun 30 13:08:27.533818 [ 0.003580] landlock: Up and running. Jun 30 13:08:27.533863 [ 0.003585] Yama: disabled by default; enable with sysctl kernel.yama.* Jun 30 13:08:27.545756 [ 0.003769] AppArmor: AppArmor initialized Jun 30 13:08:27.545814 [ 0.003781] TOMOYO Linux initialized Jun 30 13:08:27.545859 [ 0.003825] LSM support for eBPF active Jun 30 13:08:27.557746 [ 0.004068] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 13:08:27.557814 [ 0.004082] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jun 30 13:08:27.569767 [ 0.005480] /cpus/cpu@0 missing clock-frequency property Jun 30 13:08:27.569827 [ 0.005506] /cpus/cpu@1 missing clock-frequency property Jun 30 13:08:27.581772 [ 0.005520] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 13:08:27.581858 [ 0.006468] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 13:08:27.593762 [ 0.006475] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 13:08:27.593824 [ 0.006578] cblist_init_generic: Setting adjustable number of callback queues. Jun 30 13:08:27.605724 [ 0.006583] cblist_init_generic: Setting shift to 1 and lim to 1. Jun 30 13:08:27.617769 [ 0.006722] Setting up static identity map for 0x40400000 - 0x404000ac Jun 30 13:08:27.617833 [ 0.007879] rcu: Hierarchical SRCU implementation. Jun 30 13:08:27.617899 [ 0.007884] rcu: Max phase no-delay instances is 1000. Jun 30 13:08:27.629739 [ 0.010026] EFI services will not be available. Jun 30 13:08:27.629739 [ 0.010371] smp: Bringing up secondary CPUs ... Jun 30 13:08:27.641738 [ 0.011106] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 13:08:27.641810 [ 0.011118] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 13:08:27.653781 [ 0.011249] smp: Brought up 1 node, 2 CPUs Jun 30 13:08:27.653839 [ 0.011258] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 13:08:27.665783 [ 0.011265] CPU: All CPU(s) started in HYP mode. Jun 30 13:08:27.665843 [ 0.011269] CPU: Virtualization extensions available. Jun 30 13:08:27.677745 [ 0.012139] devtmpfs: initialized Jun 30 13:08:27.677802 [ 0.023003] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 13:08:27.677858 [ 0.023236] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Jun 30 13:08:27.689664 [ 0.023261] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 13:08:27.701749 [ 0.023787] pinctrl core: initialized pinctrl subsystem Jun 30 13:08:27.701814 [ 0.024538] DMI not present or invalid. Jun 30 13:08:27.713758 [ 0.025213] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 13:08:27.713821 [ 0.026757] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 13:08:27.725735 [ 0.028243] audit: initializing netlink subsys (disabled) Jun 30 13:08:27.725782 [ 0.028443] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 Jun 30 13:08:27.737714 [ 0.029624] thermal_sys: Registered thermal governor 'fair_share' Jun 30 13:08:27.737769 [ 0.029631] thermal_sys: Registered thermal governor 'bang_bang' Jun 30 13:08:27.749756 [ 0.029636] thermal_sys: Registered thermal governor 'step_wise' Jun 30 13:08:27.749818 [ 0.029640] thermal_sys: Registered thermal governor 'user_space' Jun 30 13:08:27.761756 [ 0.029644] thermal_sys: Registered thermal governor 'power_allocator' Jun 30 13:08:27.761819 [ 0.029844] No ATAGs? Jun 30 13:08:27.773742 [ 0.029911] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jun 30 13:08:27.773812 [ 0.029919] hw-breakpoint: maximum watchpoint size is 8 bytes. Jun 30 13:08:27.785683 [ 0.031002] Serial: AMBA PL011 UART driver Jun 30 13:08:27.785683 [ 0.080458] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 30 13:08:27.797764 [ 0.087352] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Jun 30 13:08:27.797834 [ 0.091803] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages Jun 30 13:08:27.809791 [ 0.091811] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page Jun 30 13:08:27.809854 [ 0.098649] iommu: Default domain type: Translated Jun 30 13:08:27.821780 [ 0.098657] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 13:08:27.821842 [ 0.099630] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) Jun 30 13:08:27.833740 [ 0.100165] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 13:08:27.833800 [ 0.100176] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 13:08:27.845750 [ 0.100809] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 13:08:27.857688 [ 0.100839] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 13:08:27.857727 [ 0.101041] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 13:08:27.869744 [ 0.101397] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 13:08:27.869805 [ 0.101407] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 13:08:27.881745 [ 0.101787] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 13:08:27.881806 [ 0.102078] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 13:08:27.881853 [ 0.102087] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 13:08:27.893781 [ 0.102380] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 13:08:27.893843 [ 0.102497] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 13:08:27.905750 [ 0.102506] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 13:08:27.905812 [ 0.102688] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 13:08:27.917754 [ 0.102907] pps_core: LinuxPPS API ver. 1 registered Jun 30 13:08:27.917815 [ 0.102912] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 13:08:27.929750 [ 0.102928] PTP clock support registered Jun 30 13:08:27.929808 [ 0.104462] NetLabel: Initializing Jun 30 13:08:27.929852 [ 0.104468] NetLabel: domain hash size = 128 Jun 30 13:08:27.941760 [ 0.104473] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Jun 30 13:08:27.941821 [ 0.104527] NetLabel: unlabeled traffic allowed by default Jun 30 13:08:27.953757 [ 0.104698] vgaarb: loaded Jun 30 13:08:27.953818 [ 0.105153] clocksource: Switched to clocksource mct-frc Jun 30 13:08:27.953845 [ 0.105734] VFS: Disk quotas dquot_6.6.0 Jun 30 13:08:27.965763 [ 0.105818] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jun 30 13:08:27.965828 [ 0.106582] AppArmor: AppArmor Filesystem Enabled Jun 30 13:08:27.977753 [ 0.116590] NET: Registered PF_INET protocol family Jun 30 13:08:27.977814 [ 0.116791] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) Jun 30 13:08:27.989762 [ 0.118263] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 13:08:27.989830 [ 0.118364] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 13:08:28.001789 [ 0.118389] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Jun 30 13:08:28.013751 [ 0.118488] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) Jun 30 13:08:28.013818 [ 0.118719] TCP: Hash tables configured (established 8192 bind 8192) Jun 30 13:08:28.025760 [ 0.118956] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) Jun 30 13:08:28.025857 [ 0.119049] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 13:08:28.037775 [ 0.119089] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Jun 30 13:08:28.049747 [ 0.119304] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 13:08:28.049811 [ 0.119344] NET: Registered PF_XDP protocol family Jun 30 13:08:28.049858 [ 0.119354] PCI: CLS 0 bytes, default 64 Jun 30 13:08:28.061765 [ 0.119844] Trying to unpack rootfs image as initramfs... Jun 30 13:08:28.061827 [ 0.120204] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. Jun 30 13:08:28.073771 [ 0.125722] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Jun 30 13:08:28.085771 [ 0.190149] Initialise system trusted keyrings Jun 30 13:08:28.085830 [ 0.190236] Key type blacklist registered Jun 30 13:08:28.085875 [ 0.191484] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Jun 30 13:08:28.097773 [ 0.199336] zbud: loaded Jun 30 13:08:28.097830 [ 0.201383] integrity: Platform Keyring initialized Jun 30 13:08:28.097879 [ 0.201415] integrity: Machine keyring initialized Jun 30 13:08:28.109765 [ 0.201425] Key type asymmetric registered Jun 30 13:08:28.109824 [ 0.201432] Asymmetric key parser 'x509' registered Jun 30 13:08:28.121765 [ 1.422588] Freeing initrd memory: 25120K Jun 30 13:08:28.121824 [ 1.444675] alg: self-tests for CTR-KDF (hmac(sha256)) passed Jun 30 13:08:28.121874 [ 1.444941] bounce: pool size: 64 pages Jun 30 13:08:28.133767 [ 1.445119] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) Jun 30 13:08:28.133836 [ 1.445325] io scheduler mq-deadline registered Jun 30 13:08:28.145773 [ 1.450460] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc Jun 30 13:08:28.145843 [ 1.471473] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 13:08:28.157790 [ 1.471485] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 13:08:28.169785 [ 1.473863] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 13:08:28.169852 [ 1.473873] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 13:08:28.181765 [ 1.474692] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 13:08:28.193766 [ 1.474701] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 13:08:28.205737 [ 1.475522] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 13:08:28.205806 [ 1.475531] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 13:08:28.217775 [ 1.477884] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 13:08:28.229784 [ 1.480674] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 13:08:28.229846 [ 1.483453] Serial: AMBA driver Jun 30 13:08:28.241753 [ 1.483680] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 13:08:28.241825 [ 1.484155] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 13:08:28.253760 [ 1.484621] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 13:08:28.265756 [ 2.565429] printk: console [ttySAC2] enabled Jun 30 13:08:28.265822 [ 2.570260] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 97, base_baud = 0) is a S3C6400/10 Jun 30 13:08:28.277748 [ 2.580901] STM32 USART driver initialized Jun 30 13:08:28.277807 [ 2.595323] mousedev: PS/2 mouse device common for all mice Jun 30 13:08:28.301669 [ 2.626550] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 13:08:28.325713 [ 2.635179] s5m-rtc s5m-rtc: setting system clock to 2024-06-30T13:08:28 UTC (1719752908) Jun 30 13:08:28.337768 [ 2.645013] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Jun 30 13:08:28.349752 [ 2.652427] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 13:08:28.349787 [ 2.660444] NET: Registered PF_INET6 protocol family Jun 30 13:08:28.361660 [ 2.684530] Segment Routing with IPv6 Jun 30 13:08:28.385755 [ 2.686819] In-situ OAM (IOAM) with IPv6 Jun 30 13:08:28.385814 [ 2.690753] mip6: Mobile IPv6 Jun 30 13:08:28.385858 [ 2.693632] NET: Registered PF_PACKET protocol family Jun 30 13:08:28.397762 [ 2.698757] mpls_gso: MPLS GSO support Jun 30 13:08:28.397821 [ 2.702807] ThumbEE CPU extension supported. Jun 30 13:08:28.397868 [ 2.706625] Registering SWP/SWPB emulation handler Jun 30 13:08:28.409770 [ 2.711875] registered taskstats version 1 Jun 30 13:08:28.409829 [ 2.715523] Loading compiled-in X.509 certificates Jun 30 13:08:28.421609 [ 3.176130] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Jun 30 13:08:28.877787 [ 3.183488] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' Jun 30 13:08:28.889785 [ 3.194570] zswap: loaded using pool lzo/zbud Jun 30 13:08:28.889837 [ 3.198446] Key type .fscrypt registered Jun 30 13:08:28.901750 [ 3.201803] Key type fscrypt-provisioning registered Jun 30 13:08:28.901835 [ 3.226145] Key type encrypted registered Jun 30 13:08:28.925756 [ 3.228694] AppArmor: AppArmor sha1 policy hashing enabled Jun 30 13:08:28.925817 [ 3.234219] ima: No TPM chip found, activating TPM-bypass! Jun 30 13:08:28.937755 [ 3.239650] ima: Allocated hash algorithm: sha256 Jun 30 13:08:28.937815 [ 3.244361] ima: No architecture policies found Jun 30 13:08:28.949714 [ 3.248917] evm: Initialising EVM extended attributes: Jun 30 13:08:28.949775 [ 3.253962] evm: security.selinux Jun 30 13:08:28.949820 [ 3.257256] evm: security.SMACK64 (disabled) Jun 30 13:08:28.961785 [ 3.261509] evm: security.SMACK64EXEC (disabled) Jun 30 13:08:28.961846 [ 3.266110] evm: security.SMACK64TRANSMUTE (disabled) Jun 30 13:08:28.973709 [ 3.271144] evm: security.SMACK64MMAP (disabled) Jun 30 13:08:28.973769 [ 3.275744] evm: security.apparmor Jun 30 13:08:28.973793 [ 3.279129] evm: security.ima Jun 30 13:08:28.973816 [ 3.282087] evm: security.capability Jun 30 13:08:28.985673 [ 3.285641] evm: HMAC attrs: 0x1 Jun 30 13:08:28.985722 [ 3.875132] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 13:08:29.573761 [ 3.881106] clk: Disabling unused clocks Jun 30 13:08:29.585726 [ 3.894051] Freeing unused kernel image (initmem) memory: 2048K Jun 30 13:08:29.597762 [ 3.898907] Checked W+X mappings: passed, no W+X pages found Jun 30 13:08:29.597796 [ 3.904166] Run /init as init process Jun 30 13:08:29.609668 Loading, please wait... Jun 30 13:08:29.633691 Starting systemd-udevd version 252.26-1~deb12u2 Jun 30 13:08:29.717661 [ 4.801311] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 13:08:30.509740 [ 4.813118] usbcore: registered new interface driver usbfs Jun 30 13:08:30.509803 [ 4.826261] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 13:08:30.533750 [ 4.835108] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 13:08:30.533788 [ 4.844461] usbcore: registered new interface driver hub Jun 30 13:08:30.545676 [ 4.859502] usbcore: registered new device driver usb Jun 30 13:08:30.557723 [ 4.871528] Synopsys Designware Multimedia Card Interface Driver Jun 30 13:08:30.569728 [ 4.879926] phy phy-12130000.phy.2: phy_power_on was called before phy_init Jun 30 13:08:30.581730 [ 4.898341] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 30 13:08:30.605646 [ 4.908956] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 30 13:08:30.605682 [ 4.915114] phy phy-12130000.phy.2: phy_power_on was called before phy_init Jun 30 13:08:30.617747 [ 4.925302] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 30 13:08:30.629734 [ 4.926742] exynos-ohci 12120000.usb: USB Host Controller Jun 30 13:08:30.629796 [ 4.930339] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 30 13:08:30.641774 [ 4.935706] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 13:08:30.641835 [ 4.946635] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 30 13:08:30.653755 [ 4.953037] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 30 13:08:30.653818 [ 4.959575] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 Jun 30 13:08:30.665700 [ 4.985937] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 13:08:30.689694 [ 4.999962] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 Jun 30 13:08:30.701778 [ 5.013421] exynos-ohci 12120000.usb: irq 107, io mem 0x12120000 Jun 30 13:08:30.713745 [ 5.020216] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo Jun 30 13:08:30.725765 [ 5.020373] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 109,32 bit host data width,128 deep fifo Jun 30 13:08:30.741765 [ 5.039013] exynos-ehci 12110000.usb: irq 107, io mem 0x12110000 Jun 30 13:08:30.741799 [ 5.044677] mmc_host mmc1: card is polling. Jun 30 13:08:30.741824 [ 5.059976] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 13:08:30.761775 [ 5.068128] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 13:08:30.773720 [ 5.080467] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 13:08:30.785758 [ 5.087328] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 13:08:30.785795 [ 5.094507] usb usb2: Product: EHCI Host Controller Jun 30 13:08:30.797750 [ 5.099355] usb usb2: Manufacturer: Linux 6.1.0-22-armmp-lpae ehci_hcd Jun 30 13:08:30.797846 [ 5.105870] usb usb2: SerialNumber: 12110000.usb Jun 30 13:08:30.809748 [ 5.118762] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 13:08:30.821758 [ 5.131272] hub 2-0:1.0: USB hub found Jun 30 13:08:30.833751 [ 5.135796] hub 2-0:1.0: 3 ports detected Jun 30 13:08:30.833809 [ 5.157587] SCSI subsystem initialized Jun 30 13:08:30.857697 [ 5.167003] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 Jun 30 13:08:30.869771 [ 5.173871] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 13:08:30.881753 [ 5.181031] usb usb1: Product: USB Host Controller Jun 30 13:08:30.881808 [ 5.185799] usb usb1: Manufacturer: Linux 6.1.0-22-armmp-lpae ohci_hcd Jun 30 13:08:30.893697 [ 5.192324] usb usb1: SerialNumber: 12120000.usb Jun 30 13:08:30.893757 [ 5.219706] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 30 13:08:30.917743 [ 5.235179] hub 1-0:1.0: USB hub found Jun 30 13:08:30.929694 [ 5.245037] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 13:08:30.953750 [ 5.255832] hub 1-0:1.0: 3 ports detected Jun 30 13:08:30.953782 [ 5.261394] mmc0: new high speed SDHC card at address aaaa Jun 30 13:08:30.965740 [ 5.266888] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 30 13:08:30.965808 [ 5.273833] mmcblk0: mmc0:aaaa SU04G 3.69 GiB Jun 30 13:08:30.977746 [ 5.278801] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 30 13:08:30.977815 [ 5.289540] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 30 13:08:30.989721 [ 5.299137] mmc1: new DDR MMC card at address 0001 Jun 30 13:08:31.001794 [ 5.303653] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 30 13:08:31.001864 [ 5.309718] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Jun 30 13:08:31.013814 [ 5.318551] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 30 13:08:31.025739 [ 5.331810] mmcblk1: mmc1:0001 M4G1FB 3.64 GiB Jun 30 13:08:31.037707 [ 5.341024] scsi host0: ahci-dwc Jun 30 13:08:31.037766 [ 5.343692] mmcblk1: p1 p2 p3 p4 Jun 30 13:08:31.037811 [ 5.346214] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 110 Jun 30 13:08:31.049733 [ 5.360476] mmcblk1boot0: mmc1:0001 M4G1FB 1.00 MiB Jun 30 13:08:31.061732 [ 5.373014] mmcblk1boot1: mmc1:0001 M4G1FB 1.00 MiB Jun 30 13:08:31.073736 [ 5.403151] mmcblk1rpmb: mmc1:0001 M4G1FB 128 KiB, chardev (241:0) Jun 30 13:08:31.109679 [ 5.723739] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 13:08:31.433623 [ 5.797860] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 13:08:31.505606 [ 5.833221] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 30 13:08:31.529648 [ 5.838788] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 30 13:08:31.541657 [ 5.844640] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 30 13:08:31.553723 [ 5.852082] ata1.00: configured for UDMA/133 Jun 30 13:08:31.553756 [ 5.855829] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 30 13:08:31.565606 [ 5.904103] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 13:08:31.601639 [ 5.908208] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 13:08:31.613683 [ 5.916339] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 Jun 30 13:08:31.625711 [ 5.925211] xhci-hcd xhci-hcd.2.auto: irq 111, io mem 0x12000000 Jun 30 13:08:31.625744 [ 5.931221] I/O error, dev mmcblk0, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 13:08:31.637795 [ 5.933650] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 13:08:31.637857 [ 5.946026] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 13:08:31.649766 [ 5.953652] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 13:08:31.661770 [ 5.961228] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 Jun 30 13:08:31.661840 [ 5.968387] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 13:08:31.673756 [ 5.975598] usb usb3: Product: xHCI Host Controller Jun 30 13:08:31.673789 [ 5.980454] usb usb3: Manufacturer: Linux 6.1.0-22-armmp-lpae xhci-hcd Jun 30 13:08:31.685779 [ 5.986953] usb usb3: SerialNumber: xhci-hcd.2.auto Jun 30 13:08:31.685839 [ 5.995086] hub 3-0:1.0: USB hub found Jun 30 13:08:31.697752 [ 5.997498] hub 3-0:1.0: 1 port detected Jun 30 13:08:31.697837 [ 6.002536] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 13:08:31.709714 [ 6.009564] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 Jun 30 13:08:31.709714 [ 6.017647] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 30 13:08:31.721794 [ 6.024834] usb usb4: Product: xHCI Host Controller Jun 30 13:08:31.721863 [ 6.029683] usb usb4: Manufacturer: Linux 6.1.0-22-armmp-lpae xhci-hcd Jun 30 13:08:31.733777 [ 6.036204] usb usb4: SerialNumber: xhci-hcd.2.auto Jun 30 13:08:31.733831 [ 6.043718] hub 4-0:1.0: USB hub found Jun 30 13:08:31.745786 [ 6.046116] hub 4-0:1.0: 1 port detected Jun 30 13:08:31.745843 [ 6.046992] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 30 13:08:31.757703 [ 6.057984] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 30 13:08:31.757735 [ 6.066188] I/O error, dev mmcblk0, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 13:08:31.769773 [ 6.074193] sd 0:0:0:0: [sda] Write Protect is off Jun 30 13:08:31.781738 [ 6.079016] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 30 13:08:31.781793 [ 6.088049] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 30 13:08:31.793714 [ 6.119739] sda: sda1 sda2 < sda5 > Jun 30 13:08:31.817673 [ 6.122556] sd 0:0:0:0: [sda] Attached SCSI disk Jun 30 13:08:31.817706 [ 6.174243] I/O error, dev mmcblk0, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 13:08:31.877750 [ 6.500803] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 13:08:32.201755 [ 6.571168] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 13:08:32.273743 [ 6.685414] I/O error, dev mmcblk0, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 13:08:32.393609 [ 6.793024] I/O error, dev mmcblk0, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 13:08:32.501721 [ 6.900630] I/O error, dev mmcblk0, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 13:08:32.609574 [ 7.008244] I/O error, dev mmcblk0, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 13:08:32.717689 [ 7.015753] Buffer I/O error on dev mmcblk0, logical block 967954, async page read Jun 30 13:08:32.717743 [ 7.149177] random: crng init done Jun 30 13:08:32.849735 [ 7.258236] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. Jun 30 13:08:32.969751 [ 7.269098] device-mapper: uevent: version 1.0.3 Jun 30 13:08:32.969812 [ 7.274059] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Jun 30 13:08:32.981708 Begin: Loading essential drivers ... done. Jun 30 13:08:33.653743 Begin: Running /scripts/init-premount ... done. Jun 30 13:08:36.665799 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 30 13:08:36.677745 Begin: Running /scripts/local-premount ... done. Jun 30 13:08:36.753644 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 30 13:08:36.801695 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 30 13:08:36.897757 /dev/mapper/arndale--metrocentre--vg-root: clean, 39331/1220608 files, 377982/4882432 blocks Jun 30 13:08:37.161708 done. Jun 30 13:08:37.173680 [ 12.126368] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 30 13:08:37.833706 [ 12.405619] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. Jun 30 13:08:38.109735 done. Jun 30 13:08:38.109787 Begin: Running /scripts/local-bottom ... done. Jun 30 13:08:38.157713 Begin: Running /scripts/init-bottom ... done. Jun 30 13:08:38.205669 [ 12.729217] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. Jun 30 13:08:38.433709 INIT: version 3.06 booting Jun 30 13:08:38.697673 INIT: No inittab.d directory found Jun 30 13:08:38.805669 Using makefile-style concurrent boot in runlevel S. Jun 30 13:08:39.189707 Starting hotplug events dispatcher: systemd-udevd. Jun 30 13:08:41.025710 Synthesizing the initial hotplug events (subsystems)...done. Jun 30 13:08:41.277728 Synthesizing the initial hotplug events (devices)...done. Jun 30 13:08:41.844551 Waiting for /dev to be fully populated...[ 16.313083] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 13:08:42.009764 [ 16.323605] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 30 13:08:42.021755 [ 16.523929] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jun 30 13:08:42.225713 [ 16.548212] panfrost 11800000.gpu: clock rate = 533000000 Jun 30 13:08:42.249718 [ 16.653040] panfrost 11800000.gpu: mali-t600 id 0x600 major 0x0 minor 0x0 status 0x1 Jun 30 13:08:42.361764 [ 16.659348] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,31b4dfff Jun 30 13:08:42.361835 [ 16.667527] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 Jun 30 13:08:42.373766 [ 16.679258] panfrost 11800000.gpu: shader_present=0xf l2_present=0x1 Jun 30 13:08:42.385697 [ 16.719235] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 0 Jun 30 13:08:42.421714 [ 16.737204] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 13:08:42.445695 [ 16.781189] usb3503 usb-hub: switched to HUB mode Jun 30 13:08:42.481725 [ 16.784420] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 13:08:42.481786 [ 16.805692] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 13:08:42.505749 [ 16.944966] I/O error, dev mmcblk0, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 13:08:42.649727 [ 17.053275] I/O error, dev mmcblk0, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 Jun 30 13:08:42.757736 [ 17.105326] usb 2-3: new high-speed USB device number 2 using exynos-ehci Jun 30 13:08:42.805718 [ 17.165728] exynos4-fb 14400000.fimd: deferred probe timeout, ignoring dependency Jun 30 13:08:42.865815 [ 17.173234] exynos-mixer 14450000.mixer: deferred probe timeout, ignoring dependency Jun 30 13:08:42.877645 [ 17.231964] I/O error, dev mmcblk0, sector 7743714 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 2 Jun 30 13:08:42.937685 [ 17.244442] OF: graph: no port node found in /soc/hdmi@14530000 Jun 30 13:08:42.937719 [ 17.252107] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations Jun 30 13:08:42.949710 [ 17.258348] exynos-drm exynos-drm: bound 14400000.fimd (ops fimd_component_ops [exynosdrm]) Jun 30 13:08:42.961710 [ 17.269613] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops [exynosdrm]) Jun 30 13:08:42.973717 [ 17.276853] usb 2-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 Jun 30 13:08:42.973784 [ 17.284978] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jun 30 13:08:42.985710 [ 17.292871] hub 2-3:1.0: USB hub found Jun 30 13:08:42.985742 [ 17.295727] exynos-drm exynos-drm: bound 14500000.dsi (ops exynos_dsi_component_ops [exynosdrm]) Jun 30 13:08:42.997718 [ 17.295948] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_component_ops [exynosdrm]) Jun 30 13:08:43.009714 [ 17.304902] hub 2-3:1.0: 3 ports detected Jun 30 13:08:43.009746 [ 17.318701] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Jun 30 13:08:43.021688 [ 17.324267] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes Jun 30 13:08:43.021723 [ 17.334811] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 Jun 30 13:08:43.033679 [ 17.565727] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 13:08:43.273641 [ 17.634499] usb 2-3.2: new high-speed USB device number 3 using exynos-ehci Jun 30 13:08:43.333680 [ 17.646941] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 13:08:43.345710 [ 17.766852] I/O error, dev mmcblk0, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 13:08:43.465735 [ 17.779726] usb 2-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=77.32 Jun 30 13:08:43.477712 [ 17.787962] usb 2-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Jun 30 13:08:43.489695 [ 17.794450] usb 2-3.2: Product: USB2.0 Hub Jun 30 13:08:43.489758 [ 17.813689] hub 2-3.2:1.0: USB hub found Jun 30 13:08:43.513681 [ 17.816688] hub 2-3.2:1.0: 4 ports detected Jun 30 13:08:43.513745 [ 17.874887] I/O error, dev mmcblk0, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 13:08:43.573719 [ 17.982716] I/O error, dev mmcblk0, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 13:08:43.681699 [ 18.090635] I/O error, dev mmcblk0, sector 7743639 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Jun 30 13:08:43.789730 [ 18.098486] Buffer I/O error on dev mmcblk0, logical block 967954, async page read Jun 30 13:08:43.801663 [ 18.129334] usb 2-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 30 13:08:43.825684 [ 18.243745] usb 2-3.2.4: New USB device found, idVendor=0b95, idProduct=772a, bcdDevice= 0.01 Jun 30 13:08:43.945719 [ 18.251020] usb 2-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 30 13:08:43.957705 [ 18.258537] usb 2-3.2.4: Product: AX88772 Jun 30 13:08:43.957762 [ 18.262549] usb 2-3.2.4: Manufacturer: ASIX Elec. Corp. Jun 30 13:08:43.957811 [ 18.267873] usb 2-3.2.4: SerialNumber: 000001 Jun 30 13:08:43.969643 [ 18.726396] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 30 13:08:44.428544 [ 19.415829] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 13:08:45.121788 [ 19.431382] Asix Electronics AX88772A usb-002:004:10: attached PHY driver (mii_bus:phy_addr=usb-002:004:10, irq=POLL) Jun 30 13:08:45.133748 [ 19.445081] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 7a:33:e2:3b:5d:83 Jun 30 13:08:45.145782 [ 19.457414] usbcore: registered new interface driver asix Jun 30 13:08:45.157707 done. Jun 30 13:08:45.484608 [ 20.275532] EXT4-fs (dm-0): re-mounted. Quota mode: none. Jun 30 13:08:45.976635 Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). Jun 30 13:08:46.016600 Checking file systems.../dev/sda1: clean, 922/61056 files, 25374/243968 blocks Jun 30 13:08:47.784618 done. Jun 30 13:08:47.832598 Cleaning up temporary files... /tmp. Jun 30 13:08:48.108617 [ 22.665586] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 30 13:08:48.372733 [ 22.717630] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Jun 30 13:08:48.420630 [ 22.976360] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k FS Jun 30 13:08:48.683828 Mounting local filesystems...done. Jun 30 13:08:49.044636 Activating swapfile swap, if any...done. Jun 30 13:08:49.044636 Cleaning up temporary files.... Jun 30 13:08:49.092611 Starting Setting kernel variables: sysctl. Jun 30 13:08:49.344642 [ 24.248519] audit: type=1400 audit(1719752929.856:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=897 comm="apparmor_parser" Jun 30 13:08:49.956672 [ 24.263739] audit: type=1400 audit(1719752929.860:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=898 comm="apparmor_parser" Jun 30 13:08:49.968686 [ 24.277667] audit: type=1400 audit(1719752929.864:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=898 comm="apparmor_parser" Jun 30 13:08:49.992618 [ 24.481485] asix 2-3.2.4:1.0 eth0: configuring for phy/internal link mode Jun 30 13:08:50.184653 [ 24.624993] audit: type=1400 audit(1719752930.232:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=940 comm="apparmor_parser" Jun 30 13:08:50.340843 [ 24.644081] audit: type=1400 audit(1719752930.248:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=940 comm="apparmor_parser" Jun 30 13:08:50.352669 [ 24.657569] audit: type=1400 audit(1719752930.252:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=940 comm="apparmor_parser" Jun 30 13:08:50.364662 [ 24.999065] audit: type=1400 audit(1719752930.608:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=939 comm="apparmor_parser" Jun 30 13:08:50.712615 [ 25.017343] audit: type=1400 audit(1719752930.608:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=939 comm="apparmor_parser" Jun 30 13:08:50.724673 [ 25.033209] audit: type=1400 audit(1719752930.608:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=939 comm="apparmor_parser" Jun 30 13:08:50.748857 [ 25.050740] audit: type=1400 audit(1719752930.608:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=939 comm="apparmor_parser" Jun 30 13:08:50.760668 Starting: AppArmorLoading AppArmor profiles...done. Jun 30 13:08:50.772694 . Jun 30 13:08:50.772718 [ 26.630506] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 30 13:08:52.331625 [ 26.636665] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jun 30 13:08:52.342808 Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1 Jun 30 13:08:53.912569 Copyright 2004-2022 Internet Systems Consortium. Jun 30 13:08:53.912708 All rights reserved. Jun 30 13:08:53.912708 For info, please visit https://www.isc.org/software/dhcp/ Jun 30 13:08:53.924048 Jun 30 13:08:53.924048 Listening on LPF/eth0/9e:04:00:59:64:5a Jun 30 13:08:53.924048 Sending on LPF/eth0/9e:04:00:59:64:5a Jun 30 13:08:53.924048 Sending on Socket/fallback Jun 30 13:08:53.924048 Created duid "\000\001\000\001.\024\025b\236\004\000YdZ". Jun 30 13:08:53.936744 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 Jun 30 13:08:53.936828 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 Jun 30 13:08:53.948675 DHCPOFFER of 10.149.64.44 from 10.149.64.4 Jun 30 13:08:53.948734 DHCPREQUEST for 10.149.64.44 on eth0 to 255.255.255.255 port 67 Jun 30 13:08:53.959799 DHCPACK of 10.149.64.44 from 10.149.64.4 Jun 30 13:08:53.959799 bound to 10.149.64.44 -- renewal in 291 seconds. Jun 30 13:08:54.044169 done. Jun 30 13:08:54.044169 Cleaning up temporary files.... Jun 30 13:08:54.116199 Starting nftables: none Jun 30 13:08:54.260742 . Jun 30 13:08:54.686159 INIT: Entering runlevel: 2 Jun 30 13:08:54.748629 Using makefile-style concurrent boot in runlevel 2. Jun 30 13:08:54.781730 Starting Apache httpd web server: apache2. Jun 30 13:08:56.873788 Starting NTP server: ntpd2024-06-30T13:08:57 ntpd[1127]: INIT: ntpd ntpsec-1.2.2: Starting Jun 30 13:08:57.269835 2024-06-30T13:08:57 ntpd[1127]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 30 13:08:57.281775 . Jun 30 13:08:57.281827 Starting periodic command scheduler: cron. Jun 30 13:08:57.389747 Starting system message bus: dbus. Jun 30 13:08:57.653779 Starting OpenBSD Secure Shell server: sshd. Jun 30 13:08:58.244590 Jun 30 13:08:59.285684 Debian GNU/Linux 12 arndale-metrocentre ttySAC2 Jun 30 13:08:59.285684 Jun 30 13:08:59.285684 arndale-metrocentre login: INIT: Switching to r INIT: No inittab.d directorUsing makefile-style concurrent boot in runlevel 6. Jun 30 13:14:10.496835 Stopping SMP IRQ Balancer: irqbalance. Jun 30 13:14:10.568788 Stopping nftables: none. Jun 30 13:14:10.568844 Stopping hotplug events dispatcher: systemd-udevd. Jun 30 13:14:10.604793 Saving the system clock to /dev/rtc0. Jun 30 13:14:11.172712 Hardware Clock updated to Sun Jun 30 13:14:11 UTC 2024. Jun 30 13:14:11.184730 Stopping Apache httpd web server: apache2. Jun 30 13:14:11.736580 Asking all remaining processes to terminate...done. Jun 30 13:14:12.396625 All processes ended within 1 seconds...done. Jun 30 13:14:12.396625 Deconfiguring network interfaces...ifdown: ignoring unknown interface eth0=eth0 Jun 30 13:14:12.504585 done. Jun 30 13:14:12.504585 [ 346.976779] EXT4-fs (sda1): unmounting filesystem. Jun 30 13:14:12.672603 Deactivating swap...done. Jun 30 13:14:12.744602 Unmounting local filesystems...done. Jun 30 13:14:12.756569 [ 347.369703] EXT4-fs (dm-0): re-mounted. Quota mode: none. Jun 30 13:14:13.068524 Will now restart. Jun 30 13:14:13.344582 [ 347.670613] asix 2-3.2.4:1.0 eth0: Link is Down Jun 30 13:14:13.368605 [ 347.738133] sd 0:0:0:0: [sda] Synchronizing SCSI cache Jun 30 13:14:13.440609 [ 347.745951] wake enabled for irq 101 (gpx1-4) Jun 30 13:14:13.440609 [ 347.748834] wake enabled for irq 102 (gpx1-5) Jun 30 13:14:13.452645 [ 347.753195] wake enabled for irq 103 (gpx1-6) Jun 30 13:14:13.452645 [ 347.757530] wake enabled for irq 104 (gpx1-7) Jun 30 13:14:13.452645 [ 347.761869] wake enabled for irq 105 (gpx2-0) Jun 30 13:14:13.464633 [ 347.766216] wake enabled for irq 106 (gpx2-1) Jun 30 13:14:13.464633 [ 347.771035] reboot: Reű Jun 30 13:14:13.804634 Jun 30 13:14:13.804634 U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE Jun 30 13:14:13.804634 Jun 30 13:14:13.804634 CPU: Exynos5250@1000MHz Jun 30 13:14:13.804634 Jun 30 13:14:13.804634 Board: Arndale Jun 30 13:14:13.816615 I2C: i2c_init: failed to init bus 0 for speed = 100000 Jun 30 13:14:13.816615 ready Jun 30 13:14:13.816615 DRAM: 2 GiB Jun 30 13:14:13.816615 trace: copying 000ab188 bytes of early data from 50000000 to beff0000 Jun 30 13:14:13.840579 trace: enabled Jun 30 13:14:13.876573 MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 Jun 30 13:14:14.236580 i2c_init: failed to init bus 0 for speed = 100000 Jun 30 13:14:14.296621 In: serial Jun 30 13:14:14.296621 Out: serial Jun 30 13:14:14.296621 Err: serial Jun 30 13:14:14.296856 SCSI: ARNDALE SCSI INIT Jun 30 13:14:14.296891 Target spinup took 0 ms. Jun 30 13:14:14.306543 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jun 30 13:14:14.306616 flags: ncq stag pm led clo only pmp pio slum part ccc apst Jun 30 13:14:14.320659 Net: Net Initialization Skipped Jun 30 13:14:14.320659 No ethernet found. Jun 30 13:14:14.320659 Hostname: arndale-metrocentre Jun 30 13:14:14.320659 Hit any key to stop autoboot: 2  1  0 Jun 30 13:14:16.240584 (Re)start USB... Jun 30 13:14:16.240584 USB0: USB EHCI 1.00 Jun 30 13:14:16.252588 scanning bus 0 for devices... 4 USB Device(s) found Jun 30 13:14:21.848781 scanning usb for storage devices... 0 Storage Device(s) found Jun 30 13:14:21.895279 scanning usb for ethernet devices... 1 Ethernet Device(s) found Jun 30 13:14:22.292591 Waiting for Ethernet connection... done. Jun 30 13:14:23.948468 BOOTP broadcast 1 Jun 30 13:14:23.948468 BOOTP broadcast 2 Jun 30 13:14:24.956452 BOOTP broadcast 3 Jun 30 13:14:25.980486 DHCP client bound to address 10.149.64.44 (2122 ms) Jun 30 13:14:25.980692 Using asx0 device Jun 30 13:14:25.992508 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 13:14:25.992508 Filename 'pxelinux.0'. Jun 30 13:14:25.992508 Load address: 0x43e00000 Jun 30 13:14:25.992508 Loading: *### Jun 30 13:14:26.016490 2.2 MiB/s Jun 30 13:14:26.016490 done Jun 30 13:14:26.016490 Bytes transferred = 42430 (a5be hex) Jun 30 13:14:26.016490 missing environment variable: pxeuuid Jun 30 13:14:26.016490 Retrieving file: pxelinux.cfg/0A95402C Jun 30 13:14:26.028666 Using asx0 device Jun 30 13:14:26.028732 TFTP from server 10.149.64.3; our IP address is 10.149.64.44 Jun 30 13:14:26.028780 Filename 'pxelinux.cfg/0A95402C'. Jun 30 13:14:26.040505 Load address: 0x51000000 Jun 30 13:14:26.040505 Loading: *# Jun 30 13:14:26.040505 20.5 KiB/s Jun 30 13:14:26.040505 done Jun 30 13:14:26.040505 Bytes transferred = 65 (41 hex) Jun 30 13:14:26.040505 Config file found Jun 30 13:14:26.040505 Ignoring unknown command: serial Jun 30 13:14:26.052460 1: local Jun 30 13:14:26.052460 scanning bus for devices... Jun 30 13:14:26.052460 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 13:14:26.088505 Type: Hard Disk Jun 30 13:14:26.088505 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 13:14:26.088505 Found 1 device(s). Jun 30 13:14:26.088505 Jun 30 13:14:26.088505 SCSI device 0: Jun 30 13:14:26.100511 Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O Jun 30 13:14:26.100511 Type: Hard Disk Jun 30 13:14:26.100511 Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) Jun 30 13:14:26.112477 ... is now current device Jun 30 13:14:26.112477 Scanning scsi 0... Jun 30 13:14:26.112477 Found U-Boot script /boot.scr Jun 30 13:14:26.292453 1768 bytes read in 37 ms (45.9 KiB/s) Jun 30 13:14:26.328459 ## Executing script at 50000000 Jun 30 13:14:26.340468 Loading dtbs/6.10.0-rc5+/exynos5250-arndale.dtb Jun 30 13:14:26.340468 46641 bytes read in 2927 ms (14.6 KiB/s) Jun 30 13:14:29.164455 983052 bytes read in 101 ms (9.3 MiB/s) Jun 30 13:14:29.284624 Loaded xen-4.19-unstable to 0x41000000 (f000c) Jun 30 13:14:29.296654 command line: conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan Jun 30 13:14:29.308603 10785280 bytes read in 460 ms (22.4 MiB/s) Jun 30 13:14:29.764639 Loaded vmlinuz-6.10.0-rc5+ to 0x42000000 (a49200) Jun 30 13:14:29.776694 command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 13:14:29.788603 12142147 bytes read in 758 ms (15.3 MiB/s) Jun 30 13:14:30.540474 Loaded initrd.img-6.10.0-rc5+ to 0x43300000 (b94643) Jun 30 13:14:30.552502 chosen { Jun 30 13:14:30.552502 bootargs = "conswitch=x watchdog noreboot async-show-all console=dtuart dtuart=serial2 dom0_mem=512M,max:512M ucode=scan"; Jun 30 13:14:30.564641 #size-cells = <0x00000001>; Jun 30 13:14:30.564703 #address-cells = <0x00000001>; Jun 30 13:14:30.564746 stdout-path = "serial2:115200n8"; Jun 30 13:14:30.564789 module@1 { Jun 30 13:14:30.576504 reg = <0x43300000 0x00b94643>; Jun 30 13:14:30.576504 compatible = "xen,linux-initrd", "xen,multiboot-module"; Jun 30 13:14:30.576504 }; Jun 30 13:14:30.576504 module@0 { Jun 30 13:14:30.576504 bootargs = "ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused"; Jun 30 13:14:30.600508 reg = <0x42000000 0x00a49200>; Jun 30 13:14:30.600508 compatible = "xen,linux-zimage", "xen,multiboot-module"; Jun 30 13:14:30.600508 }; Jun 30 13:14:30.600508 }; Jun 30 13:14:30.600508 Booting 0x41000000 - 0x43000000 Jun 30 13:14:30.612508 Kernel image @ 0x41000000 [ 0x000000 - 0x12f000 ] Jun 30 13:14:30.612508 ## Flattened Device Tree blob at 43000000 Jun 30 13:14:30.612508 Booting using the fdt blob at 0x43000000 Jun 30 13:14:30.624506 reserving fdt memory region: addr=43000000 size=c000 Jun 30 13:14:30.624506 Loading Device Tree to 4fff1000, end 4fffffff ... OK Jun 30 13:14:30.636463 Jun 30 13:14:30.636463 Starting kernel ...(fake run for tracing) Jun 30 13:14:30.636463 Jun 30 13:14:30.636463 Jun 30 13:14:30.636463 Starting kernel ... Jun 30 13:14:30.648436 Jun 30 13:14:30.648436 __ __ _ _ _ ___ _ _ _ Jun 30 13:14:30.696507 \ \/ /___ _ __ | || | / |/ _ \ _ _ _ __ ___| |_ __ _| |__ | | ___ Jun 30 13:14:30.696507 \ // _ \ '_ \ | || |_ | | (_) |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ Jun 30 13:14:30.708509 / \ __/ | | | |__ _|| |\__, |__| |_| | | | \__ \ || (_| | |_) | | __/ Jun 30 13:14:30.708509 /_/\_\___|_| |_| |_|(_)_| /_/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| Jun 30 13:14:30.720463 Jun 30 13:14:30.720463 (XEN) Xen version 4.19-unstable (osstest@test-lab.xenproject.org) (gcc (Debian 12.2.0-14) 12.2.0) debug=y Sun Jun 30 09:16:28 UTC 2024 Jun 30 13:14:30.732507 (XEN) Latest ChangeSet: Wed Jun 26 16:07:30 2024 +0100 git:08f9b1dd9c Jun 30 13:14:30.732507 (XEN) build-id: 49321b95d54bf04a04497dcfff6064128f8c8a55 Jun 30 13:14:30.744552 (XEN) Processor: 410fc0f4: "ARM Limited", variant: 0x0, part 0xc0f,rev 0x4 Jun 30 13:14:30.744552 (XEN) 32-bit Execution: Jun 30 13:14:30.756502 (XEN) Processor Features: 00001031:00011011 Jun 30 13:14:30.756502 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Jun 30 13:14:30.756502 (XEN) Extensions: GenericTimer Security Jun 30 13:14:30.768502 (XEN) Debug Features: 02010555 Jun 30 13:14:30.768502 (XEN) Auxiliary Features: 00000000 Jun 30 13:14:30.768502 (XEN) Memory Model Features: 10201105 20000000 Jun 30 13:14:30.780524 (XEN) 01240000 02102211 Jun 30 13:14:30.780524 (XEN) ISA Features: 02101110 13112111 21232041 Jun 30 13:14:30.780524 (XEN) 11112131 10011142 00000000 Jun 30 13:14:30.792446 (XEN) arch/arm/platforms/exynos5.c:134: sysram_addr: 0x0000000002020000 size: 0x0000000000001000offset: 0x0000000000000000 Jun 30 13:14:30.804492 (XEN) Set SYSRAM to 0000000041000074 (00200074) Jun 30 13:14:30.804492 (XEN) SMP: Allowing 2 CPUs Jun 30 13:14:30.804492 (XEN) enabled workaround for: ARM erratum 766422 Jun 30 13:14:30.816499 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz Jun 30 13:14:30.816499 (XEN) GICv2 initialization: Jun 30 13:14:30.816499 (XEN) gic_dist_addr=0000000010481000 Jun 30 13:14:30.832523 (XEN) gic_cpu_addr=0000000010482000 Jun 30 13:14:30.832523 (XEN) gic_hyp_addr=0000000010484000 Jun 30 13:14:30.832523 (XEN) gic_vcpu_addr=0000000010486000 Jun 30 13:14:30.832523 (XEN) gic_maintenance_irq=25 Jun 30 13:14:30.832523 (XEN) GICv2: 160 lines, 2 cpus, secure (IID 0200043b). Jun 30 13:14:30.844490 (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2) Jun 30 13:14:30.844490 (XEN) Initializing Credit2 scheduler Jun 30 13:14:30.856524 (XEN) load_precision_shift: 18 Jun 30 13:14:30.856524 (XEN) load_window_shift: 30 Jun 30 13:14:30.856524 (XEN) underload_balance_tolerance: 0 Jun 30 13:14:30.856524 (XEN) overload_balance_tolerance: -3 Jun 30 13:14:30.868437 (XEN) runqueues arrangement: socket Jun 30 13:14:30.868437 (XEN) cap enforcement granularity: 10ms Jun 30 13:14:30.868437 (XEN) load tracking window length 1073741824 ns Jun 30 13:14:30.880504 (XEN) Allocated console ring of 16 KiB. Jun 30 13:14:30.880504 (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 Jun 30 13:14:30.880504 (XEN) CPU0: Guest atomics will try 2 times before pausing the domain Jun 30 13:14:30.892493 (XEN) Bringing up CPU1 Jun 30 13:14:30.892493 (XEN) CPU1: Guest atomics will try 1 times before pausing the domain Jun 30 13:14:30.904502 (XEN) Brought up 2 CPUs Jun 30 13:14:30.904502 (XEN) CPU 1 booted. Jun 30 13:14:30.904502 (XEN) I/O virtualisation disabled Jun 30 13:14:30.904502 (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID Jun 30 13:14:30.916509 (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 Jun 30 13:14:30.916509 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource Jun 30 13:14:30.916509 (XEN) Initializing Credit2 scheduler Jun 30 13:14:30.928444 (XEN) load_precision_shift: 18 Jun 30 13:14:30.928444 (XEN) load_window_shift: 30 Jun 30 13:14:30.928444 (XEN) underload_balance_tolerance: 0 Jun 30 13:14:30.928444 (XEN) overload_balance_tolerance: -3 Jun 30 13:14:30.940495 (XEN) runqueues arrangement: socket Jun 30 13:14:30.940495 (XEN) cap enforcement granularity: 10ms Jun 30 13:14:30.940495 (XEN) load tracking window length 1073741824 ns Jun 30 13:14:30.952567 (XEN) Adding cpu 0 to runqueue 0 Jun 30 13:14:30.952567 (XEN) First cpu on runqueue, activating Jun 30 13:14:30.952567 (XEN) Adding cpu 1 to runqueue 0 Jun 30 13:14:30.952567 (XEN) alternatives: Patching with alt table 002c2f84 -> 002c305c Jun 30 13:14:30.964664 (XEN) CPU0 will execute ICIALLU on guest exit Jun 30 13:14:30.964732 (XEN) CPU1 will execute ICIALLU on guest exit Jun 30 13:14:30.976574 (XEN) *** LOADING DOMAIN 0 *** Jun 30 13:14:30.976608 (XEN) Loading d0 kernel from boot module @ 0000000042000000 Jun 30 13:14:30.976634 (XEN) Loading ramdisk from boot module @ 0000000043300000 Jun 30 13:14:30.988558 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: Jun 30 13:14:30.988591 (XEN) BANK[0] 0x00000060000000-0x00000080000000 (512MB) Jun 30 13:14:31.550931 (XEN) Grant table range: 0x00000041000000-0x00000041040000 Jun 30 13:14:31.551007 (XEN) Allocating PPI 16 for event channel interrupt Jun 30 13:14:31.588503 (XEN) d0: extended regions not supported for 32-bit guests Jun 30 13:14:31.588503 (XEN) Loading zImage from 0000000042000000 to 0000000067400000-0000000067e49200 Jun 30 13:14:31.600457 (XEN) Loading d0 initrd from 0000000043300000 to 0x0000000068200000-0x0000000068d94643 Jun 30 13:14:31.696409 (XEN) Loading d0 DTB to 0x0000000068000000-0x000000006800b499 Jun 30 13:14:31.792442 (XEN) Initial low memory virq threshold set at 0x4000 pages. Jun 30 13:14:31.804481 (XEN) Scrubbing Free RAM in background Jun 30 13:14:31.804481 (XEN) Std. Loglevel: All Jun 30 13:14:31.804481 (XEN) Guest Loglevel: All Jun 30 13:14:31.804481 (XEN) *************************************************** Jun 30 13:14:31.816508 (XEN) WARNING: SILO mode is not enabled. Jun 30 13:14:31.816508 (XEN) It has implications on the security of the system, Jun 30 13:14:31.832516 (XEN) unless the communications have been forbidden between Jun 30 13:14:31.832516 (XEN) untrusted domains. Jun 30 13:14:31.832516 (XEN) *************************************************** Jun 30 13:14:31.832516 (XEN) 3... 2... 1... Jun 30 13:14:34.836467 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 30 13:14:34.869772 (XEN) Freed 352kB init memory. Jun 30 13:14:34.869797 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 13:14:35.972592 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 Jun 30 13:14:35.996507 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 Jun 30 13:14:35.996507 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 Jun 30 13:14:36.008508 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 Jun 30 13:14:36.008508 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 13:14:36.020526 [ 0.000000] Booting Linux on physical CPU 0x0 Jun 30 13:14:36.056431 [ 0.000000] Linux version 6.10.0-rc5+ (osstest@himrod1) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Sun Jun 30 08:10:22 UTC 2024 Jun 30 13:14:36.080637 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d Jun 30 13:14:36.080737 [ 0.000000] CPU: div instructions available: patching division code Jun 30 13:14:36.092503 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jun 30 13:14:36.092503 [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 Jun 30 13:14:36.104504 [ 0.000000] Memory policy: Data cache writealloc Jun 30 13:14:36.104504 [ 0.000000] Xen 4.19 support found Jun 30 13:14:36.116509 [ 0.000000] efi: UEFI not found. Jun 30 13:14:36.116509 [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 on node -1 Jun 30 13:14:36.116509 [ 0.000000] Samsung CPU ID: 0x43520010 Jun 30 13:14:36.128528 [ 0.000000] Zone ranges: Jun 30 13:14:36.128528 [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] Jun 30 13:14:36.128528 [ 0.000000] Normal empty Jun 30 13:14:36.140632 [ 0.000000] HighMem empty Jun 30 13:14:36.140693 [ 0.000000] Movable zone start for each node Jun 30 13:14:36.140739 [ 0.000000] Early memory node ranges Jun 30 13:14:36.152510 [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] Jun 30 13:14:36.152510 [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] Jun 30 13:14:36.164507 [ 0.000000] psci: probing for conduit method from DT. Jun 30 13:14:36.164507 [ 0.000000] psci: PSCIv1.1 detected in firmware. Jun 30 13:14:36.176509 [ 0.000000] psci: Using standard PSCI v0.2 function IDs Jun 30 13:14:36.176509 [ 0.000000] psci: Trusted OS migration not required Jun 30 13:14:36.176509 [ 0.000000] psci: SMC Calling Convention v1.2 Jun 30 13:14:36.188508 [ 0.000000] percpu: Embedded 18 pages/cpu s41428 r8192 d24108 u73728 Jun 30 13:14:36.188508 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 ro root=/dev/mapper/arndale--metrocentre--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused Jun 30 13:14:36.212509 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 13:14:36.212509 [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Jun 30 13:14:36.224503 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 131072 Jun 30 13:14:36.236507 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Jun 30 13:14:36.236507 [ 0.000000] Memory: 414600K/524288K available (15360K kernel code, 2268K rwdata, 6084K rodata, 2048K init, 439K bss, 44152K reserved, 65536K cma-reserved, 0K highmem) Jun 30 13:14:36.248505 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jun 30 13:14:36.260512 [ 0.000000] trace event string verifier disabled Jun 30 13:14:36.260512 [ 0.000000] rcu: Hierarchical RCU implementation. Jun 30 13:14:36.272506 [ 0.000000] rcu: RCU event tracing is enabled. Jun 30 13:14:36.272506 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. Jun 30 13:14:36.284511 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Jun 30 13:14:36.284511 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Jun 30 13:14:36.296663 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jun 30 13:14:36.296730 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jun 30 13:14:36.308526 [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 Jun 30 13:14:36.320524 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). Jun 30 13:14:36.320524 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Jun 30 13:14:36.332500 [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Jun 30 13:14:36.344506 [ 0.000013] Switching to timer-based delay loop, resolution 41ns Jun 30 13:14:36.344506 [ 0.000520] Console: colour dummy device 80x30 Jun 30 13:14:36.356502 [ 0.000538] printk: legacy console [hvc0] enabled Jun 30 13:14:36.356502 [ 0.299540] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) Jun 30 13:14:36.368636 [ 0.309938] CPU: Testing write buffer coherency: ok Jun 30 13:14:36.368702 [ 0.314879] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 13:14:36.380536 [ 0.324433] CPU0: Spectre BHB: enabling loop workaround for all CPUs Jun 30 13:14:36.392524 [ 0.330846] pid_max: default: 32768 minimum: 301 Jun 30 13:14:36.392524 [ 0.335631] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 13:14:36.404510 [ 0.342914] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jun 30 13:14:36.404510 [ 0.351340] /cpus/cpu@0 missing clock-frequency property Jun 30 13:14:36.416520 [ 0.356116] /cpus/cpu@1 missing clock-frequency property Jun 30 13:14:36.416520 [ 0.361534] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jun 30 13:14:36.428503 [ 0.368234] xen:grant_table: Grant tables using version 1 layout Jun 30 13:14:36.428503 [ 0.373366] Grant table initialized Jun 30 13:14:36.428503 [ 0.376915] xen:events: Using FIFO-based ABI Jun 30 13:14:36.440511 [ 0.381219] Xen: initializing cpu0 Jun 30 13:14:36.440511 [ 0.384744] Setting up static identity map for 0x60300000 - 0x603000ac Jun 30 13:14:36.452496 [ 0.392534] rcu: Hierarchical SRCU implementation. Jun 30 13:14:36.452496 [ 0.396137] rcu: Max phase no-delay instances is 1000. Jun 30 13:14:36.452496 [ 0.404373] EFI services will not be available. Jun 30 13:14:36.464487 [ 0.407693] smp: Bringing up secondary CPUs ... Jun 30 13:14:36.464487 (XEN) d0v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 13:14:36.536468 [ 0.482008] Xen: initializing cpu1 Jun 30 13:14:36.536468 [ 0.482166] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jun 30 13:14:36.548478 [ 0.482190] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable Jun 30 13:14:36.560519 [ 0.501170] smp: Brought up 1 node, 2 CPUs Jun 30 13:14:36.560519 [ 0.504819] SMP: Total of 2 processors activated (96.00 BogoMIPS). Jun 30 13:14:36.572482 [ 0.511107] CPU: All CPU(s) started in SVC mode. Jun 30 13:14:36.572482 [ 0.517000] devtmpfs: initialized Jun 30 13:14:36.572482 [ 0.529367] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 Jun 30 13:14:36.596518 [ 0.535915] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Jun 30 13:14:36.596518 [ 0.545587] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Jun 30 13:14:36.608502 [ 0.553491] pinctrl core: initialized pinctrl subsystem Jun 30 13:14:36.608502 [ 0.560122] DMI not present or invalid. Jun 30 13:14:36.620528 [ 0.563637] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jun 30 13:14:36.620528 [ 0.570258] DMA: preallocated 256 KiB pool for atomic coherent allocations Jun 30 13:14:36.636523 [ 0.579584] thermal_sys: Registered thermal governor 'step_wise' Jun 30 13:14:36.636523 [ 0.579739] software IO TLB: area num 2. Jun 30 13:14:36.648501 [ 0.588409] software IO TLB: only able to allocate 8 MB Jun 30 13:14:36.648501 [ 0.595480] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) Jun 30 13:14:36.660510 [ 0.600684] No ATAGs? Jun 30 13:14:36.660510 [ 0.602985] hw-breakpoint: Failed to enable monitor mode on CPU 0. Jun 30 13:14:36.660510 [ 0.611693] Serial: AMBA PL011 UART driver Jun 30 13:14:36.672449 [ 0.658313] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 65 Jun 30 13:14:36.720470 [ 0.686753] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 Jun 30 13:14:36.744476 [ 0.710681] xen:balloon: Initialising balloon driver Jun 30 13:14:36.768429 [ 0.717127] iommu: Default domain type: Translated Jun 30 13:14:36.780506 [ 0.720543] iommu: DMA domain TLB invalidation policy: strict mode Jun 30 13:14:36.780506 [ 0.729340] SCSI subsystem initialized Jun 30 13:14:36.792502 [ 0.732102] usbcore: registered new interface driver usbfs Jun 30 13:14:36.792502 [ 0.737340] usbcore: registered new interface driver hub Jun 30 13:14:36.792502 [ 0.742681] usbcore: registered new device driver usb Jun 30 13:14:36.804468 [ 0.749404] s3c-i2c 12ce0000.i2c: slave address 0x00 Jun 30 13:14:36.804468 [ 0.752993] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz Jun 30 13:14:36.816561 [ 0.759249] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter Jun 30 13:14:36.816561 [ 0.764312] s3c-i2c 121d0000.i2c: slave address 0x00 Jun 30 13:14:36.828516 [ 0.769244] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz Jun 30 13:14:36.828516 [ 0.775282] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter Jun 30 13:14:36.840512 [ 0.781055] pps_core: LinuxPPS API ver. 1 registered Jun 30 13:14:36.840512 [ 0.785452] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Jun 30 13:14:36.852511 [ 0.794679] PTP clock support registered Jun 30 13:14:36.852511 [ 0.798914] EDAC MC: Ver: 3.0.0 Jun 30 13:14:36.852511 [ 0.802170] scmi_core: SCMI protocol bus registered Jun 30 13:14:36.864500 [ 0.808868] vgaarb: loaded Jun 30 13:14:36.864500 [ 0.812025] clocksource: Switched to clocksource arch_sys_counter Jun 30 13:14:36.876445 [ 0.829200] NET: Registered PF_INET protocol family Jun 30 13:14:36.888499 [ 0.832874] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Jun 30 13:14:36.900512 [ 0.840743] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jun 30 13:14:36.900512 [ 0.848467] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jun 30 13:14:36.912521 [ 0.856246] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Jun 30 13:14:36.924506 [ 0.864082] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Jun 30 13:14:36.924506 [ 0.871357] TCP: Hash tables configured (established 4096 bind 4096) Jun 30 13:14:36.936504 [ 0.877729] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 13:14:36.936504 [ 0.884299] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Jun 30 13:14:36.948506 [ 0.891397] NET: Registered PF_UNIX/PF_LOCAL protocol family Jun 30 13:14:36.948506 [ 0.897558] RPC: Registered named UNIX socket transport module. Jun 30 13:14:36.960543 [ 0.903032] RPC: Registered udp transport module. Jun 30 13:14:36.960543 [ 0.907788] RPC: Registered tcp transport module. Jun 30 13:14:36.972508 [ 0.912585] RPC: Registered tcp-with-tls transport module. Jun 30 13:14:36.972508 [ 0.918137] RPC: Registered tcp NFSv4.1 backchannel transport module. Jun 30 13:14:36.984503 [ 0.924648] PCI: CLS 0 bytes, default 64 Jun 30 13:14:36.984672 [ 0.930052] Initialise system trusted keyrings Jun 30 13:14:36.984746 [ 0.933364] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Jun 30 13:14:36.996502 [ 0.939888] squashfs: version 4.0 (2009/01/31) Phillip Lougher Jun 30 13:14:36.996502 [ 0.945774] NFS: Registering the id_resolver key type Jun 30 13:14:37.008504 [ 0.950695] Key type id_resolver registered Jun 30 13:14:37.008504 [ 0.954936] Key type id_legacy registered Jun 30 13:14:37.020641 [ 0.959040] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Jun 30 13:14:37.020698 [ 0.965795] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Jun 30 13:14:37.032478 [ 0.973506] Trying to unpack rootfs image as initramfs... Jun 30 13:14:37.032478 [ 0.994780] Key type asymmetric registered Jun 30 13:14:37.056502 [ 0.997520] Asymmetric key parser 'x509' registered Jun 30 13:14:37.056502 [ 1.002592] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) Jun 30 13:14:37.068506 [ 1.009935] io scheduler mq-deadline registered Jun 30 13:14:37.068506 [ 1.014556] io scheduler kyber registered Jun 30 13:14:37.068506 [ 1.018661] io scheduler bfq registered Jun 30 13:14:37.080463 [ 1.160021] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 13:14:37.224499 [ 1.166271] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 13:14:37.236429 [ 1.206122] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 13:14:37.272501 [ 1.212359] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 Jun 30 13:14:37.272501 [ 1.254850] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 13:14:37.320509 [ 1.261064] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 13:14:37.320509 [ 1.312099] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 Jun 30 13:14:37.368563 [ 1.318309] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 Jun 30 13:14:37.380500 [ 1.331099] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected Jun 30 13:14:37.392482 [ 1.405389] xen:xen_evtchn: Event-channel device installed Jun 30 13:14:37.464470 [ 1.435831] Freeing initrd memory: 11860K Jun 30 13:14:37.488458 [ 1.486005] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled Jun 30 13:14:37.548479 [ 1.496969] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 94, base_baud = 0) is a S3C6400/10 Jun 30 13:14:37.560511 [ 1.505153] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 95, base_baud = 0) is a S3C6400/10 Jun 30 13:14:37.572502 [ 1.514053] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 96, base_baud = 0) is a S3C6400/10 Jun 30 13:14:37.572502 [ 1.523035] SuperH (H)SCI(F) driver initialized Jun 30 13:14:37.584504 [ 1.527353] STMicroelectronics ASC driver initialized Jun 30 13:14:37.584504 [ 1.532265] STM32 USART driver initialized Jun 30 13:14:37.596492 [ 1.537651] exynos-trng 10830600.rng: Exynos True Random Number Generator. Jun 30 13:14:37.596492 [ 1.546563] random: crng init done Jun 30 13:14:37.608454 [ 1.556830] brd: module loaded Jun 30 13:14:37.608454 [ 1.562783] loop: module loaded Jun 30 13:14:37.620459 [ 1.578282] Invalid max_queues (4), will use default max: 2. Jun 30 13:14:37.636464 [ 1.596884] tun: Universal TUN/TAP device driver, 1.6 Jun 30 13:14:37.660511 [ 1.600749] CAN device driver interface Jun 30 13:14:37.660511 [ 1.605892] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded Jun 30 13:14:37.660511 [ 1.617033] xen_netfront: Initialising Xen virtual ethernet driver Jun 30 13:14:37.672472 [ 1.621886] pegasus: Pegasus/Pegasus II USB Ethernet driver Jun 30 13:14:37.684507 [ 1.627514] usbcore: registered new interface driver pegasus Jun 30 13:14:37.684507 [ 1.633250] usbcore: registered new interface driver asix Jun 30 13:14:37.696506 [ 1.638719] usbcore: registered new interface driver ax88179_178a Jun 30 13:14:37.696506 [ 1.644869] usbcore: registered new interface driver cdc_ether Jun 30 13:14:37.708507 [ 1.650762] usbcore: registered new interface driver smsc75xx Jun 30 13:14:37.708698 [ 1.656586] usbcore: registered new interface driver smsc95xx Jun 30 13:14:37.720510 [ 1.662403] usbcore: registered new interface driver net1080 Jun 30 13:14:37.720510 [ 1.668121] usbcore: registered new interface driver cdc_subset Jun 30 13:14:37.732507 [ 1.674120] usbcore: registered new interface driver zaurus Jun 30 13:14:37.732507 [ 1.679778] usbcore: registered new interface driver cdc_ncm Jun 30 13:14:37.744488 [ 1.689164] usbcore: registered new interface driver usb-storage Jun 30 13:14:37.744488 [ 1.699675] i2c_dev: i2c /dev entries driver Jun 30 13:14:37.756613 [ 1.717964] device-mapper: uevent: version 1.0.3 Jun 30 13:14:37.780507 [ 1.721390] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev Jun 30 13:14:37.780507 [ 1.730976] cpu cpu0: OPP table can't be empty Jun 30 13:14:37.792502 [ 1.735722] failed to register cpuidle driver Jun 30 13:14:37.792502 [ 1.739091] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver Jun 30 13:14:37.804642 [ 1.747428] sdhci: Secure Digital Host Controller Interface driver Jun 30 13:14:37.804710 [ 1.752482] sdhci: Copyright(c) Pierre Ossman Jun 30 13:14:37.816483 [ 1.760502] sdhci-pltfm: SDHCI platform and OF driver helper Jun 30 13:14:37.816483 [ 1.768432] ledtrig-cpu: registered to indicate activity on CPUs Jun 30 13:14:37.828508 [ 1.773868] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... Jun 30 13:14:37.840499 [ 1.780506] usbcore: registered new interface driver usbhid Jun 30 13:14:37.840499 [ 1.785231] usbhid: USB HID core driver Jun 30 13:14:37.840499 [ 1.796106] NET: Registered PF_INET6 protocol family Jun 30 13:14:37.852478 [ 1.801561] Segment Routing with IPv6 Jun 30 13:14:37.864504 [ 1.803901] In-situ OAM (IOAM) with IPv6 Jun 30 13:14:37.864504 [ 1.807898] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Jun 30 13:14:37.864504 [ 1.814318] NET: Registered PF_PACKET protocol family Jun 30 13:14:37.876509 [ 1.818984] can: controller area network core Jun 30 13:14:37.876509 [ 1.823453] NET: Registered PF_CAN protocol family Jun 30 13:14:37.888507 [ 1.828236] can: raw protocol Jun 30 13:14:37.888507 [ 1.831276] can: broadcast manager protocol Jun 30 13:14:37.888507 [ 1.835548] can: netlink gateway - max_hops=1 Jun 30 13:14:37.900510 [ 1.840287] Key type dns_resolver registered Jun 30 13:14:37.900510 [ 1.844958] ThumbEE CPU extension supported. Jun 30 13:14:37.900510 [ 1.848663] Registering SWP/SWPB emulation handler Jun 30 13:14:37.912457 [ 1.863073] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level Jun 30 13:14:37.924656 [ 1.869954] Loading compiled-in X.509 certificates Jun 30 13:14:37.924716 [ 1.913827] s3c-i2c 12c60000.i2c: slave address 0x66 Jun 30 13:14:37.972513 [ 1.917425] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz Jun 30 13:14:37.984508 [ 1.924098] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 Jun 30 13:14:37.984508 [ 1.932236] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 Jun 30 13:14:37.996466 [ 1.973711] s5m-rtc s5m-rtc: registered as rtc0 Jun 30 13:14:38.032472 [ 1.982603] s5m-rtc s5m-rtc: setting system clock to 2024-06-30T13:14:38 UTC (1719753278) Jun 30 13:14:38.044484 [ 1.993636] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter Jun 30 13:14:38.056513 [ 1.998234] s3c-i2c 12c90000.i2c: slave address 0x00 Jun 30 13:14:38.056513 [ 2.002675] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz Jun 30 13:14:38.068633 [ 2.009349] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter Jun 30 13:14:38.068699 [ 2.015282] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Jun 30 13:14:38.080513 [ 2.021417] clk: Not disabling unused clocks Jun 30 13:14:38.080513 [ 2.025002] PM: genpd: Disabling unused power domains Jun 30 13:14:38.080513 [ 2.033601] Freeing unused kernel image (initmem) memory: 2048K Jun 30 13:14:38.092559 [ 2.040002] Run /init as init process Jun 30 13:14:38.092559 Loading, please wait... Jun 30 13:14:38.128445 Starting systemd-udevd version 252.26-1~deb12u2 Jun 30 13:14:38.188461 [ 3.311138] i2c-gpio i2c-10: using lines 552 (SDA) and 553 (SCL) Jun 30 13:14:39.372456 [ 3.446061] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator Jun 30 13:14:39.504478 [ 3.456556] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator Jun 30 13:14:39.516489 [ 3.466674] Synopsys Designware Multimedia Card Interface Driver Jun 30 13:14:39.528609 [ 3.483586] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator Jun 30 13:14:39.552435 [ 3.510628] phy phy-12130000.phy.8: phy_power_on was called before phy_init Jun 30 13:14:39.576511 [ 3.516266] exynos-ehci 12110000.usb: EHCI Host Controller Jun 30 13:14:39.576511 [ 3.521826] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 Jun 30 13:14:39.588549 [ 3.554771] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 Jun 30 13:14:39.612489 [ 3.560178] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator Jun 30 13:14:39.624501 [ 3.562904] phy phy-12130000.phy.8: phy_power_on was called before phy_init Jun 30 13:14:39.624501 [ 3.567270] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator Jun 30 13:14:39.636512 [ 3.573945] exynos-ohci 12120000.usb: USB Host Controller Jun 30 13:14:39.636512 [ 3.581648] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator Jun 30 13:14:39.648503 [ 3.586809] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 Jun 30 13:14:39.660456 [ 3.643891] s2mps11-clk s5m8767-clk: DMA mask not set Jun 30 13:14:39.708502 [ 3.647390] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 Jun 30 13:14:39.708502 [ 3.648751] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled Jun 30 13:14:39.720512 [ 3.660791] ahci-dwc 122f0000.sata: AHCI vers 0001.0300, 32 command slots, 6 Gbps, platform mode Jun 30 13:14:39.720512 [ 3.669665] ahci-dwc 122f0000.sata: 1/1 ports implemented (port mask 0x1) Jun 30 13:14:39.732601 [ 3.676502] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst Jun 30 13:14:39.744486 [ 3.687674] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. Jun 30 13:14:39.744486 [ 3.714404] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 Jun 30 13:14:39.780505 [ 3.716238] hub 1-0:1.0: USB hub found Jun 30 13:14:39.780505 [ 3.721821] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. Jun 30 13:14:39.780505 [ 3.731782] dwmmc_exynos 12200000.mmc: Using internal DMA controller. Jun 30 13:14:39.792507 [ 3.736906] dwmmc_exynos 12200000.mmc: Version ID is 241a Jun 30 13:14:39.792507 [ 3.742094] hub 1-0:1.0: 3 ports detected Jun 30 13:14:39.804505 [ 3.742452] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 127,32 bit host data width,128 deep fifo Jun 30 13:14:39.816463 [ 3.756325] mmc_host mmc0: card is polling. Jun 30 13:14:39.816463 [ 3.805120] dwmmc_exynos 12220000.mmc: Using internal DMA controller. Jun 30 13:14:39.868505 [ 3.810209] dwmmc_exynos 12220000.mmc: Version ID is 241a Jun 30 13:14:39.868662 [ 3.815772] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 128,32 bit host data width,128 deep fifo Jun 30 13:14:39.893344 [ 3.826535] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 13:14:39.893479 [ 3.854394] hub 2-0:1.0: USB hub found Jun 30 13:14:39.916504 [ 3.856825] hub 2-0:1.0: 3 ports detected Jun 30 13:14:39.916504 [ 3.864989] scsi host0: ahci-dwc Jun 30 13:14:39.928452 [ 3.888010] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 126 lpm-pol 0 Jun 30 13:14:39.952509 [ 3.896311] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling Jun 30 13:14:39.952509 [ 3.896438] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 13:14:39.964659 [ 3.905205] s3c-rtc 101e0000.rtc: registered as rtc1 Jun 30 13:14:39.976436 [ 4.076391] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) Jun 30 13:14:40.144463 [ 4.093332] mmc0: new DDR MMC card at address 0001 Jun 30 13:14:40.156452 [ 4.106357] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB Jun 30 13:14:40.168467 [ 4.117973] mmcblk0: p1 p2 p3 p4 Jun 30 13:14:40.180464 [ 4.128021] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB Jun 30 13:14:40.192506 [ 4.133290] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB Jun 30 13:14:40.192506 [ 4.135896] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 13:14:40.204534 [ 4.145902] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) Jun 30 13:14:40.204534 [ 4.146836] mmc1: new high speed SDHC card at address aaaa Jun 30 13:14:40.216580 [ 4.170153] mmcblk1: mmc1:aaaa SU04G 3.69 GiB Jun 30 13:14:40.228455 [ 4.422076] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jun 30 13:14:40.480496 [ 4.427769] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 Jun 30 13:14:40.492503 [ 4.433715] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) Jun 30 13:14:40.492503 [ 4.441269] ata1.00: configured for UDMA/133 Jun 30 13:14:40.504505 [ 4.444985] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 Jun 30 13:14:40.504505 [ 4.454250] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) Jun 30 13:14:40.516507 [ 4.460379] sd 0:0:0:0: [sda] 4096-byte physical blocks Jun 30 13:14:40.516507 [ 4.465738] sd 0:0:0:0: [sda] Write Protect is off Jun 30 13:14:40.528512 [ 4.470721] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 30 13:14:40.540477 [ 4.479818] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes Jun 30 13:14:40.540477 [ 4.509184] sda: sda1 sda2 < sda5 > Jun 30 13:14:40.564473 [ 4.511975] sd 0:0:0:0: [sda] Attached SCSI disk Jun 30 13:14:40.576440 [ 4.577744] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host Jun 30 13:14:40.636478 [ 4.623382] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 13:14:40.684510 [ 4.628163] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 Jun 30 13:14:40.696434 [ 4.653808] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002000010 Jun 30 13:14:40.720504 [ 4.662288] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 Jun 30 13:14:40.720704 [ 4.668124] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller Jun 30 13:14:40.732508 [ 4.673503] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 Jun 30 13:14:40.732508 [ 4.681233] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed Jun 30 13:14:40.744517 [ 4.689105] hub 3-0:1.0: USB hub found Jun 30 13:14:40.744517 [ 4.692130] hub 3-0:1.0: 1 port detected Jun 30 13:14:40.756491 [ 4.697007] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Jun 30 13:14:40.756491 [ 4.707449] hub 4-0:1.0: USB hub found Jun 30 13:14:40.768478 [ 4.712582] hub 4-0:1.0: 1 port detected Jun 30 13:14:40.768478 [ 5.045554] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 13:14:41.104485 [ 5.211185] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 13:14:41.272484 [ 5.348910] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 13:14:41.416445 [ 5.457215] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 13:14:41.524450 [ 5.565502] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 13:14:41.632454 [ 5.673918] I/O error, dev mmcblk1, sector 7743639 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 Jun 30 13:14:41.740444 [ 6.026986] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 13:14:42.088448 [ 6.202505] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 13:14:42.268462 [ 6.318851] I/O error, dev mmcblk1, sector 7743636 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 13:14:42.376483 [ 6.426610] I/O error, dev mmcblk1, sector 7743637 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 13:14:42.484489 [ 6.534363] I/O error, dev mmcblk1, sector 7743638 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jun 30 13:14:42.592488 [ 6.555278] Buffer I/O error on dev mmcblk1, logical block 967954, async page read Jun 30 13:14:42.616489 Begin: Loading essential drivers ... done. Jun 30 13:14:42.668438 Begin: Running /scripts/init-premount ... done. Jun 30 13:14:45.680489 Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Jun 30 13:14:45.680489 Begin: Running /scripts/local-premount ... done. Jun 30 13:14:45.692461 Begin: Will now check root file system ... fsck from util-linux 2.38.1 Jun 30 13:14:45.752367 [/sbin/fsck.ext3 (1) -- /dev/mapper/arndale--metrocentre--vg-root] fsck.ext3 -a -C0 /dev/mapper/arndale--metrocentre--vg-root Jun 30 13:14:45.872467 /dev/mapper/arndale--metrocentre--vg-root: clean, 46073/1220608 files, 606047/4882432 blocks Jun 30 13:14:46.124492 done. Jun 30 13:14:46.148446 [ 10.097710] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem Jun 30 13:14:46.160461 [ 10.483873] EXT4-fs (dm-0): mounted filesystem 7c28998c-64e2-4bdb-a776-06d00aee8062 ro with ordered data mode. Quota mode: disabled. Jun 30 13:14:46.548483 done. Jun 30 13:14:46.548483 Begin: Running /scripts/local-bottom ... done. Jun 30 13:14:46.596473 Begin: Running /scripts/init-bottom ... done. Jun 30 13:14:46.644433 INIT: version 3.06 booting Jun 30 13:14:47.136463 INIT: No inittab.d directory found Jun 30 13:14:47.208453 Using makefile-style concurrent boot in runlevel S. Jun 30 13:14:47.548462 Starting hotplug events dispatcher: systemd-udevd. Jun 30 13:14:49.328444 Synthesizing the initial hotplug events (subsystems)...done. Jun 30 13:14:49.772419 Synthesizing the initial hotplug events (devices)...done. Jun 30 13:14:50.604439 Waiting for /dev to be fully populated...[ 14.692147] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled Jun 30 13:14:50.777897 [ 14.782215] s5p-secss 10830000.sss: s5p-sss driver registered Jun 30 13:14:50.844467 [ 14.788861] mc: Linux media interface: v0.10 Jun 30 13:14:50.844467 [ 14.911813] videodev: Linux video capture interface: v2.00 Jun 30 13:14:50.968602 [ 15.028442] s5p-mfc 11000000.codec: Adding to iommu group 0 Jun 30 13:14:51.088465 [ 15.093598] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers Jun 30 13:14:51.160450 [ 15.194387] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 13:14:51.256496 [ 15.206407] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 13:14:51.268510 [ 15.213778] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 13:14:51.280510 [ 15.224829] s5p-mfc 11000000.codec: decoder registered as /dev/video0 Jun 30 13:14:51.280510 [ 15.231128] s5p-mfc 11000000.codec: encoder registered as /dev/video1 Jun 30 13:14:51.292473 [ 15.375860] exynos-gsc 13e00000.gsc: Adding to iommu group 1 Jun 30 13:14:51.436500 [ 15.382533] exynos-gsc 13e10000.gsc: Adding to iommu group 2 Jun 30 13:14:51.436500 [ 15.388969] exynos-gsc 13e20000.gsc: Adding to iommu group 3 Jun 30 13:14:51.448466 [ 15.418348] exynos-gsc 13e30000.gsc: Adding to iommu group 4 Jun 30 13:14:51.472464 [ 15.456090] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s Jun 30 13:14:51.520454 [ 15.499362] wm8994 3-001a: Device is not a WM8994, ID is 0 Jun 30 13:14:51.556466 [ 15.513329] wm8994 3-001a: probe with driver wm8994 failed with error -22 Jun 30 13:14:51.568468 [ 15.520963] usb3503 usb-hub: switched to HUB mode Jun 30 13:14:51.580501 [ 15.524418] usb3503 usb-hub: usb3503_probe: probed in hub mode Jun 30 13:14:51.580501 [ 15.541808] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 13:14:51.604491 [ 15.731530] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 13:14:51.796475 [ 15.854852] I/O error, dev mmcblk1, sector 7744000 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 13:14:51.916477 [ 15.872157] usb 1-3: new high-speed USB device number 2 using exynos-ehci Jun 30 13:14:51.928476 [ 15.970836] I/O error, dev mmcblk1, sector 7744001 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 13:14:52.036455 [ 16.073272] hub 1-3:1.0: USB hub found Jun 30 13:14:52.132491 [ 16.077369] hub 1-3:1.0: 3 ports detected Jun 30 13:14:52.132491 [ 16.083586] I/O error, dev mmcblk1, sector 7744002 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 13:14:52.144481 [ 16.104364] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 13:14:52.168504 [ 16.112152] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 13:14:52.180509 [ 16.120741] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 13:14:52.192453 [ 16.140870] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 Jun 30 13:14:52.204506 [ 16.148637] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 Jun 30 13:14:52.216507 [ 16.157336] s5p_mfc_load_firmware:75: Firmware is not present in the /lib/firmware directory nor compiled in kernel Jun 30 13:14:52.228432 [ 16.192163] I/O error, dev mmcblk1, sector 7744003 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 13:14:52.252487 [ 16.300473] I/O error, dev mmcblk1, sector 7744004 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 13:14:52.360491 [ 16.408807] I/O error, dev mmcblk1, sector 7744005 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 13:14:52.468489 [ 16.432063] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci Jun 30 13:14:52.496477 [ 16.517139] I/O error, dev mmcblk1, sector 7744006 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 13:14:52.580584 [ 16.584791] hub 1-3.2:1.0: USB hub found Jun 30 13:14:52.640477 [ 16.587740] hub 1-3.2:1.0: 4 ports detected Jun 30 13:14:52.652441 [ 16.625439] I/O error, dev mmcblk1, sector 7744007 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 Jun 30 13:14:52.688477 [ 16.645247] usbcore: registered new device driver onboard-usb-dev Jun 30 13:14:52.700471 [ 16.733746] I/O error, dev mmcblk1, sector 7744008 op 0x0:(READ) flags 0x80700 phys_seg 13 prio class 0 Jun 30 13:14:52.796475 [ 16.763004] hub 1-3.2:1.0: USB hub found Jun 30 13:14:52.820485 [ 16.767586] hub 1-3.2:1.0: 4 ports detected Jun 30 13:14:52.820485 [ 16.780553] hub 1-3.2:1.0: USB hub found Jun 30 13:14:52.844457 [ 16.783497] hub 1-3.2:1.0: 4 ports detected Jun 30 13:14:52.844457 [ 16.854624] I/O error, dev mmcblk1, sector 7744010 op 0x0:(READ) flags 0x80700 phys_seg 13 prio class 0 Jun 30 13:14:52.916479 [ 17.102098] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci Jun 30 13:14:53.160473 [ 17.255883] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random Jun 30 13:14:53.316492 [ 17.933856] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) Jun 30 13:14:53.996665 [ 17.948229] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) Jun 30 13:14:54.008518 [ 17.958121] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 7a:55:65:bd:0f:47 Jun 30 13:14:54.020495 [ 18.700764] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) Jun 30 13:14:54.764471 [ 18.876694] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) Jun 30 13:14:54.944625 [ 19.686218] Buffer I/O error on dev mmcblk1, logical block 968000, async page read Jun 30 13:14:55.752383 done. Jun 30 13:14:55.764458 [ 20.109454] EXT4-fs (dm-0): re-mounted 7c28998c-64e2-4bdb-a776-06d00aee8062 r/w. Quota mode: disabled. Jun 30 13:14:56.172469 Checking file systems.../dev/sda1: clean, 2179/61056 files, 44463/243968 blocks Jun 30 13:14:57.804466 done. Jun 30 13:14:57.828547 Cleaning up temporary files... /tmp. Jun 30 13:14:58.116501 [ 22.255145] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem Jun 30 13:14:58.320445 [ 22.307048] EXT4-fs (sda1): mounted filesystem 3d622f3b-aeba-49a9-bf44-9069f64d275e r/w with ordered data mode. Quota mode: disabled. Jun 30 13:14:58.368496 [ 22.407420] Adding 1949692k swap on /dev/mapper/arndale--metrocentre--vg-swap_1. Priority:-2 extents:1 across:1949692k Jun 30 13:14:58.476443 Mounting local filesystems...done. Jun 30 13:14:58.752530 Activating swapfile swap, if any...done. Jun 30 13:14:58.752530 Cleaning up temporary files.... Jun 30 13:14:58.788425 Starting Setting kernel variables: sysctl. Jun 30 13:14:58.944458 [ 24.270055] xenbr0: port 1(eth0) entered blocking state Jun 30 13:15:00.328531 [ 24.273973] xenbr0: port 1(eth0) entered disabled state Jun 30 13:15:00.338720 [ 24.279230] asix 1-3.2.4:1.0 eth0: entered allmulticast mode Jun 30 13:15:00.338800 [ 24.285152] asix 1-3.2.4:1.0 eth0: entered promiscuous mode Jun 30 13:15:00.352505 [ 24.295728] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode Jun 30 13:15:00.352505 Configuring network interfaces...RTNETLINK answers: Operation not supported Jun 30 13:15:02.080451 Jun 30 13:15:02.080676 Waiting for xenbr0 to get ready (MAXWAIT is 2 seconds). Jun 30 13:15:02.092562 [ 26.499361] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off Jun 30 13:15:02.560475 [ 26.505423] xenbr0: port 1(eth0) entered blocking state Jun 30 13:15:02.560475 [ 26.510596] xenbr0: port 1(eth0) entered forwarding state Jun 30 13:15:02.572396 done. Jun 30 13:15:02.728392 Cleaning up temporary files.... Jun 30 13:15:02.788570 Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Jun 30 13:15:02.836432 Starting nftables: none Jun 30 13:15:02.884479 [ 26.903943] platform sound: deferred probe pending: arndale-audio: snd_soc_register_card() failed Jun 30 13:15:02.968532 mnl.c:60: Unable to initialize Netlink socket: Protocol not supported Jun 30 13:15:03.064431 failed! Jun 30 13:15:03.064431 startpar: service(s) returned failure: nftables ... failed! Jun 30 13:15:03.076422 INIT: Entering runlevel: 2 Jun 30 13:15:03.088397 Using makefile-style concurrent boot in runlevel 2. Jun 30 13:15:03.112399 Starting Apache httpd web server: apache2AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.149.64.44. Set the 'ServerName' directive globally to suppress this message Jun 30 13:15:03.964451 . Jun 30 13:15:05.020339 Starting SMP IRQ Balancer: irqbalance. Jun 30 13:15:05.368398 Starting NTP server: ntpd2024-06-30T13:15:06 ntpd[1138]: INIT: ntpd ntpsec-1.2.2: Starting Jun 30 13:15:05.552458 2024-06-30T13:15:06 ntpd[1138]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec Jun 30 13:15:05.564421 . Jun 30 13:15:05.564421 Starting system message bus: dbus. Jun 30 13:15:05.912408 Starting OpenBSD Secure Shell server: sshd. Jun 30 13:15:06.648415 Starting /usr/local/sbin/xenstored... Jun 30 13:15:08.859687 Setting domain 0 name, domid and JSON config... Jun 30 13:15:08.859687 Done setting up Dom0 Jun 30 13:15:08.859687 Starting xenconsoled... Jun 30 13:15:08.859687 Starting QEMU as disk backend for dom0 Jun 30 13:15:08.860739 Jun 30 13:15:09.944532 Debian GNU/Linux 12 arndale-metrocentre hvc0 Jun 30 13:15:09.956424 Jun 30 13:15:09.956424 arndale-metrocentre login: [ 71.501544] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 13:15:47.560640 [ 71.643191] EXT4-fs (dm-2): mounted filesystem 1a103862-edc6-49b3-bc1c-56487e345e35 r/w with ordered data mode. Quota mode: disabled. Jun 30 13:15:47.704610 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 13:16:53.973594 [ 191.077858] EXT4-fs (dm-2): unmounting filesystem 1a103862-edc6-49b3-bc1c-56487e345e35. Jun 30 13:17:47.133726 [ 207.408628] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 13:18:03.472378 [ 207.550054] EXT4-fs (dm-2): mounted filesystem 1a103862-edc6-49b3-bc1c-56487e345e35 r/w with ordered data mode. Quota mode: disabled. Jun 30 13:18:03.616400 [ 209.446967] loop0: detected capacity change from 0 to 19531250 Jun 30 13:18:05.508383 [ 209.960459] xenbr0: port 2(vif1.0) entered blocking state Jun 30 13:18:06.012547 [ 209.964549] xenbr0: port 2(vif1.0) entered disabled state Jun 30 13:18:06.024456 [ 209.970023] vif vif-1-0 vif1.0: entered allmulticast mode Jun 30 13:18:06.024456 [ 209.975648] vif vif-1-0 vif1.0: entered promiscuous mode Jun 30 13:18:06.036405 (XEN) d1v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 13:18:10.096377 (XEN) d1v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 13:18:10.204406 (XEN) d1v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 13:18:10.240418 (XEN) common/grant_table.c:1909:d1v1 Expanding d1 grant table from 1 to 2 frames Jun 30 13:18:13.084473 (XEN) common/grant_table.c:1909:d1v1 Expanding d1 grant table from 2 to 3 frames Jun 30 13:18:13.096407 [ 217.109454] vif vif-1-0 vif1.0: Guest Rx ready Jun 30 13:18:13.168472 [ 217.113627] xenbr0: port 2(vif1.0) entered blocking state Jun 30 13:18:13.168472 [ 217.118260] xenbr0: port 2(vif1.0) entered forwarding state Jun 30 13:18:13.180416 (XEN) gnttab_mark_dirty not implemented yet Jun 30 13:18:13.204422 [ 284.237255] xen-blkback: backend/vbd/1/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 13:19:20.301771 (XEN) common/grant_table.c:1909:d1v0 Expanding d1 grant table from 3 to 4 frames Jun 30 13:19:47.865825 (XEN) common/grant_table.c:1909:d1v1 Expanding d1 grant table from 4 to 5 frames Jun 30 13:20:29.033798 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 13:23:35.064554 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 13:30:15.629835 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 13:36:57.072687 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 13:43:37.484578 [ 2139.307691] xenbr0: port 2(vif1.0) entered disabled state Jun 30 13:50:15.349736 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 13:50:18.844588 [ 2161.452603] xenbr0: port 2(vif1.0) entered disabled state Jun 30 13:50:37.492607 [ 2161.466442] vif vif-1-0 vif1.0 (unregistering): left allmulticast mode Jun 30 13:50:37.504645 [ 2161.471625] vif vif-1-0 vif1.0 (unregistering): left promiscuous mode Jun 30 13:50:37.516628 [ 2161.478225] xenbr0: port 2(vif1.0) entered disabled state Jun 30 13:50:37.516628 [ 2163.724612] EXT4-fs (dm-2): unmounting filesystem 1a103862-edc6-49b3-bc1c-56487e345e35. Jun 30 13:50:39.772743 [ 2176.519812] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 13:50:52.557783 [ 2176.660558] EXT4-fs (dm-2): mounted filesystem 1a103862-edc6-49b3-bc1c-56487e345e35 r/w with ordered data mode. Quota mode: disabled. Jun 30 13:50:52.701739 [ 2185.657699] loop0: detected capacity change from 0 to 19531250 Jun 30 13:51:01.692606 [ 2186.015792] xenbr0: port 2(vif2.0) entered blocking state Jun 30 13:51:02.052623 [ 2186.019828] xenbr0: port 2(vif2.0) entered disabled state Jun 30 13:51:02.064640 [ 2186.025381] vif vif-2-0 vif2.0: entered allmulticast mode Jun 30 13:51:02.064640 [ 2186.030924] vif vif-2-0 vif2.0: entered promiscuous mode Jun 30 13:51:02.076577 (XEN) d2v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 13:51:06.260591 (XEN) d2v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 13:51:06.380556 (XEN) d2v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 13:51:06.416596 (XEN) common/grant_table.c:1909:d2v0 Expanding d2 grant table from 1 to 2 frames Jun 30 13:51:09.460606 (XEN) common/grant_table.c:1909:d2v0 Expanding d2 grant table from 2 to 3 frames Jun 30 13:51:09.460606 [ 2193.494196] vif vif-2-0 vif2.0: Guest Rx ready Jun 30 13:51:09.532636 [ 2193.497843] xenbr0: port 2(vif2.0) entered blocking state Jun 30 13:51:09.532636 [ 2193.502823] xenbr0: port 2(vif2.0) entered forwarding state Jun 30 13:51:09.544783 [ 2193.515754] xen-blkback: backend/vbd/2/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 13:51:09.556633 [ 2231.958908] xenbr0: port 2(vif2.0) entered disabled state Jun 30 13:51:47.997632 [ 2232.227626] xenbr0: port 2(vif2.0) entered disabled state Jun 30 13:51:48.261783 [ 2232.232451] vif vif-2-0 vif2.0 (unregistering): left allmulticast mode Jun 30 13:51:48.294167 [ 2232.238275] vif vif-2-0 vif2.0 (unregistering): left promiscuous mode Jun 30 13:51:48.294233 [ 2232.244832] xenbr0: port 2(vif2.0) entered disabled state Jun 30 13:51:48.294233 [ 2258.525344] EXT4-fs (dm-2): unmounting filesystem 1a103862-edc6-49b3-bc1c-56487e345e35. Jun 30 13:52:14.572580 [ 2259.823254] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 13:52:15.868564 [ 2259.964750] EXT4-fs (dm-2): mounted filesystem 1a103862-edc6-49b3-bc1c-56487e345e35 r/w with ordered data mode. Quota mode: disabled. Jun 30 13:52:16.004645 [ 2267.706493] loop0: detected capacity change from 0 to 19531250 Jun 30 13:52:23.748757 [ 2268.037677] xenbr0: port 2(vif3.0) entered blocking state Jun 30 13:52:24.072618 [ 2268.041715] xenbr0: port 2(vif3.0) entered disabled state Jun 30 13:52:24.084644 [ 2268.047230] vif vif-3-0 vif3.0: entered allmulticast mode Jun 30 13:52:24.084644 [ 2268.052864] vif vif-3-0 vif3.0: entered promiscuous mode Jun 30 13:52:24.096588 (XEN) d3v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 13:52:28.276581 (XEN) d3v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 13:52:28.396579 (XEN) d3v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 13:52:28.432593 [ 2275.498759] xen-blkback: backend/vbd/3/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 13:52:31.537804 (XEN) common/grant_table.c:1909:d3v1 Expanding d3 grant table from 1 to 2 frames Jun 30 13:52:31.549721 (XEN) common/grant_table.c:1909:d3v1 Expanding d3 grant table from 2 to 3 frames Jun 30 13:52:31.561775 [ 2275.575409] vif vif-3-0 vif3.0: Guest Rx ready Jun 30 13:52:31.609733 [ 2275.579513] xenbr0: port 2(vif3.0) entered blocking state Jun 30 13:52:31.621730 [ 2275.584215] xenbr0: port 2(vif3.0) entered forwarding state Jun 30 13:52:31.621792 [ 2308.674308] xenbr0: port 2(vif3.0) entered disabled state Jun 30 13:53:04.717684 [ 2308.892476] xenbr0: port 2(vif3.0) entered disabled state Jun 30 13:53:04.933744 [ 2308.897018] vif vif-3-0 vif3.0 (unregistering): left allmulticast mode Jun 30 13:53:04.933809 [ 2308.903183] vif vif-3-0 vif3.0 (unregistering): left promiscuous mode Jun 30 13:53:04.945721 [ 2308.909630] xenbr0: port 2(vif3.0) entered disabled state Jun 30 13:53:04.945784 [ 2334.796751] EXT4-fs (dm-2): unmounting filesystem 1a103862-edc6-49b3-bc1c-56487e345e35. Jun 30 13:53:30.833831 [ 2336.071631] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 13:53:32.117718 [ 2336.213050] EXT4-fs (dm-2): mounted filesystem 1a103862-edc6-49b3-bc1c-56487e345e35 r/w with ordered data mode. Quota mode: disabled. Jun 30 13:53:32.261689 [ 2344.265686] loop0: detected capacity change from 0 to 19531250 Jun 30 13:53:40.297770 [ 2344.690422] xenbr0: port 2(vif4.0) entered blocking state Jun 30 13:53:40.729665 [ 2344.694513] xenbr0: port 2(vif4.0) entered disabled state Jun 30 13:53:40.729704 [ 2344.699956] vif vif-4-0 vif4.0: entered allmulticast mode Jun 30 13:53:40.741626 [ 2344.705605] vif vif-4-0 vif4.0: entered promiscuous mode Jun 30 13:53:40.741660 (XEN) d4v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 13:53:44.929768 (XEN) d4v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 13:53:45.049714 (XEN) d4v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 13:53:45.085749 [ 2352.125030] xen-blkback: backend/vbd/4/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 13:53:48.169755 (XEN) common/grant_table.c:1909:d4v0 Expanding d4 grant table from 1 to 2 frames Jun 30 13:53:48.181713 (XEN) common/grant_table.c:1909:d4v0 Expanding d4 grant table from 2 to 3 frames Jun 30 13:53:48.181778 [ 2352.217804] vif vif-4-0 vif4.0: Guest Rx ready Jun 30 13:53:48.253643 [ 2352.225890] xenbr0: port 2(vif4.0) entered blocking state Jun 30 13:53:48.265729 [ 2352.230038] xenbr0: port 2(vif4.0) entered forwarding state Jun 30 13:53:48.265791 [ 2385.199967] xenbr0: port 2(vif4.0) entered disabled state Jun 30 13:54:21.233745 [ 2385.419126] xenbr0: port 2(vif4.0) entered disabled state Jun 30 13:54:21.461697 [ 2385.432303] vif vif-4-0 vif4.0 (unregistering): left allmulticast mode Jun 30 13:54:21.473739 [ 2385.437479] vif vif-4-0 vif4.0 (unregistering): left promiscuous mode Jun 30 13:54:21.473804 [ 2385.444157] xenbr0: port 2(vif4.0) entered disabled state Jun 30 13:54:21.485700 [ 2411.254557] EXT4-fs (dm-2): unmounting filesystem 1a103862-edc6-49b3-bc1c-56487e345e35. Jun 30 13:54:47.289808 [ 2412.531054] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 13:54:48.561758 [ 2412.672491] EXT4-fs (dm-2): mounted filesystem 1a103862-edc6-49b3-bc1c-56487e345e35 r/w with ordered data mode. Quota mode: disabled. Jun 30 13:54:48.717705 [ 2420.288036] loop0: detected capacity change from 0 to 19531250 Jun 30 13:54:56.317756 [ 2420.608280] xenbr0: port 2(vif5.0) entered blocking state Jun 30 13:54:56.641761 [ 2420.612379] xenbr0: port 2(vif5.0) entered disabled state Jun 30 13:54:56.653749 [ 2420.617807] vif vif-5-0 vif5.0: entered allmulticast mode Jun 30 13:54:56.653812 [ 2420.623466] vif vif-5-0 vif5.0: entered promiscuous mode Jun 30 13:54:56.653861 (XEN) d5v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 13:55:00.865770 (XEN) d5v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 13:55:00.973734 (XEN) d5v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 13:55:01.009732 [ 2428.049825] xen-blkback: backend/vbd/5/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 13:55:04.093820 (XEN) common/grant_table.c:1909:d5v1 Expanding d5 grant table from 1 to 2 frames Jun 30 13:55:04.093901 (XEN) common/grant_table.c:1909:d5v1 Expanding d5 grant table from 2 to 3 frames Jun 30 13:55:04.117713 [ 2428.119211] vif vif-5-0 vif5.0: Guest Rx ready Jun 30 13:55:04.153747 [ 2428.123118] xenbr0: port 2(vif5.0) entered blocking state Jun 30 13:55:04.165688 [ 2428.127783] xenbr0: port 2(vif5.0) entered forwarding state Jun 30 13:55:04.165688 [ 2461.515319] xenbr0: port 2(vif5.0) entered disabled state Jun 30 13:55:37.556523 [ 2461.742688] xenbr0: port 2(vif5.0) entered disabled state Jun 30 13:55:37.784587 [ 2461.747076] vif vif-5-0 vif5.0 (unregistering): left allmulticast mode Jun 30 13:55:37.784587 [ 2461.753371] vif vif-5-0 vif5.0 (unregistering): left promiscuous mode Jun 30 13:55:37.796551 [ 2461.759853] xenbr0: port 2(vif5.0) entered disabled state Jun 30 13:55:37.796551 [ 2487.507112] EXT4-fs (dm-2): unmounting filesystem 1a103862-edc6-49b3-bc1c-56487e345e35. Jun 30 13:56:03.541784 [ 2488.768199] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 13:56:04.801713 [ 2488.909651] EXT4-fs (dm-2): mounted filesystem 1a103862-edc6-49b3-bc1c-56487e345e35 r/w with ordered data mode. Quota mode: disabled. Jun 30 13:56:04.945757 [ 2496.477618] loop0: detected capacity change from 0 to 19531250 Jun 30 13:56:12.520546 [ 2496.799866] xenbr0: port 2(vif6.0) entered blocking state Jun 30 13:56:12.836811 [ 2496.803983] xenbr0: port 2(vif6.0) entered disabled state Jun 30 13:56:12.836889 [ 2496.809388] vif vif-6-0 vif6.0: entered allmulticast mode Jun 30 13:56:12.848747 [ 2496.815071] vif vif-6-0 vif6.0: entered promiscuous mode Jun 30 13:56:12.848851 (XEN) d6v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 13:56:17.048537 (XEN) d6v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 13:56:17.156677 (XEN) d6v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 13:56:17.192567 [ 2504.201370] xen-blkback: backend/vbd/6/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 13:56:20.236576 (XEN) common/grant_table.c:1909:d6v0 Expanding d6 grant table from 1 to 2 frames Jun 30 13:56:20.260575 (XEN) common/grant_table.c:1909:d6v0 Expanding d6 grant table from 2 to 3 frames Jun 30 13:56:20.272561 [ 2504.315998] vif vif-6-0 vif6.0: Guest Rx ready Jun 30 13:56:20.356709 [ 2504.321739] xenbr0: port 2(vif6.0) entered blocking state Jun 30 13:56:20.356790 [ 2504.327330] xenbr0: port 2(vif6.0) entered forwarding state Jun 30 13:56:20.368535 [ 2537.652396] xenbr0: port 2(vif6.0) entered disabled state Jun 30 13:56:53.689681 [ 2537.842584] xenbr0: port 2(vif6.0) entered disabled state Jun 30 13:56:53.881613 [ 2537.856813] vif vif-6-0 vif6.0 (unregistering): left allmulticast mode Jun 30 13:56:53.893711 [ 2537.862074] vif vif-6-0 vif6.0 (unregistering): left promiscuous mode Jun 30 13:56:53.905651 [ 2537.868516] xenbr0: port 2(vif6.0) entered disabled state Jun 30 13:56:53.905686 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 13:56:59.561786 [ 2563.664682] EXT4-fs (dm-2): unmounting filesystem 1a103862-edc6-49b3-bc1c-56487e345e35. Jun 30 13:57:19.701853 [ 2564.949697] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 13:57:20.985805 [ 2565.091255] EXT4-fs (dm-2): mounted filesystem 1a103862-edc6-49b3-bc1c-56487e345e35 r/w with ordered data mode. Quota mode: disabled. Jun 30 13:57:21.129848 [ 2572.683643] loop0: detected capacity change from 0 to 19531250 Jun 30 13:57:28.720691 [ 2573.013120] xenbr0: port 2(vif7.0) entered blocking state Jun 30 13:57:29.048824 [ 2573.017158] xenbr0: port 2(vif7.0) entered disabled state Jun 30 13:57:29.060602 [ 2573.022671] vif vif-7-0 vif7.0: entered allmulticast mode Jun 30 13:57:29.060602 [ 2573.028317] vif vif-7-0 vif7.0: entered promiscuous mode Jun 30 13:57:29.060602 (XEN) d7v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 13:57:33.260536 (XEN) d7v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 13:57:33.372534 (XEN) d7v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 13:57:33.408543 [ 2580.462632] xen-blkback: backend/vbd/7/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 13:57:36.505710 (XEN) common/grant_table.c:1909:d7v0 Expanding d7 grant table from 1 to 2 frames Jun 30 13:57:36.517742 (XEN) common/grant_table.c:1909:d7v0 Expanding d7 grant table from 2 to 3 frames Jun 30 13:57:36.529748 [ 2580.557553] vif vif-7-0 vif7.0: Guest Rx ready Jun 30 13:57:36.589712 [ 2580.562058] xenbr0: port 2(vif7.0) entered blocking state Jun 30 13:57:36.601723 [ 2580.570518] xenbr0: port 2(vif7.0) entered forwarding state Jun 30 13:57:36.601785 [ 2615.522813] xenbr0: port 2(vif7.0) entered disabled state Jun 30 13:58:11.557773 [ 2615.764253] xenbr0: port 2(vif7.0) entered disabled state Jun 30 13:58:11.797742 [ 2615.768888] vif vif-7-0 vif7.0 (unregistering): left allmulticast mode Jun 30 13:58:11.809785 [ 2615.774966] vif vif-7-0 vif7.0 (unregistering): left promiscuous mode Jun 30 13:58:11.809849 [ 2615.781429] xenbr0: port 2(vif7.0) entered disabled state Jun 30 13:58:11.821693 [ 2641.584751] EXT4-fs (dm-2): unmounting filesystem 1a103862-edc6-49b3-bc1c-56487e345e35. Jun 30 13:58:37.625773 [ 2642.853719] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 13:58:38.885751 [ 2642.995197] EXT4-fs (dm-2): mounted filesystem 1a103862-edc6-49b3-bc1c-56487e345e35 r/w with ordered data mode. Quota mode: disabled. Jun 30 13:58:39.041683 [ 2650.643694] loop0: detected capacity change from 0 to 19531250 Jun 30 13:58:46.673802 [ 2650.974615] xenbr0: port 2(vif8.0) entered blocking state Jun 30 13:58:47.009784 [ 2650.978652] xenbr0: port 2(vif8.0) entered disabled state Jun 30 13:58:47.009888 [ 2650.984181] vif vif-8-0 vif8.0: entered allmulticast mode Jun 30 13:58:47.021760 [ 2650.989765] vif vif-8-0 vif8.0: entered promiscuous mode Jun 30 13:58:47.021820 (XEN) d8v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 13:58:51.221614 (XEN) d8v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 13:58:51.329618 (XEN) d8v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 13:58:51.377627 [ 2658.348367] xen-blkback: backend/vbd/8/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 13:58:54.381770 (XEN) common/grant_table.c:1909:d8v0 Expanding d8 grant table from 1 to 2 frames Jun 30 13:58:54.405521 (XEN) common/grant_table.c:1909:d8v0 Expanding d8 grant table from 2 to 3 frames Jun 30 13:58:54.417706 [ 2658.445934] vif vif-8-0 vif8.0: Guest Rx ready Jun 30 13:58:54.477491 [ 2658.449200] xenbr0: port 2(vif8.0) entered blocking state Jun 30 13:58:54.489702 [ 2658.454565] xenbr0: port 2(vif8.0) entered forwarding state Jun 30 13:58:54.489768 [ 2691.715638] xenbr0: port 2(vif8.0) entered disabled state Jun 30 13:59:27.753760 [ 2691.942665] xenbr0: port 2(vif8.0) entered disabled state Jun 30 13:59:27.981719 [ 2691.954067] vif vif-8-0 vif8.0 (unregistering): left allmulticast mode Jun 30 13:59:27.993757 [ 2691.959294] vif vif-8-0 vif8.0 (unregistering): left promiscuous mode Jun 30 13:59:27.993821 [ 2691.965938] xenbr0: port 2(vif8.0) entered disabled state Jun 30 13:59:28.005693 [ 2717.696392] EXT4-fs (dm-2): unmounting filesystem 1a103862-edc6-49b3-bc1c-56487e345e35. Jun 30 13:59:53.729776 [ 2718.946512] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 13:59:54.977821 [ 2719.087929] EXT4-fs (dm-2): mounted filesystem 1a103862-edc6-49b3-bc1c-56487e345e35 r/w with ordered data mode. Quota mode: disabled. Jun 30 13:59:55.121837 [ 2726.637316] loop0: detected capacity change from 0 to 19531250 Jun 30 14:00:02.673838 [ 2726.965209] xenbr0: port 2(vif9.0) entered blocking state Jun 30 14:00:02.997882 [ 2726.969249] xenbr0: port 2(vif9.0) entered disabled state Jun 30 14:00:02.997944 [ 2726.974782] vif vif-9-0 vif9.0: entered allmulticast mode Jun 30 14:00:03.009853 [ 2726.980367] vif vif-9-0 vif9.0: entered promiscuous mode Jun 30 14:00:03.009916 (XEN) d9v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 14:00:07.209847 (XEN) d9v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 14:00:07.317838 (XEN) d9v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 14:00:07.365813 (XEN) common/grant_table.c:1909:d9v0 Expanding d9 grant table from 1 to 2 frames Jun 30 14:00:10.389809 (XEN) common/grant_table.c:1909:d9v0 Expanding d9 grant table from 2 to 3 frames Jun 30 14:00:10.401705 [ 2734.413437] vif vif-9-0 vif9.0: Guest Rx ready Jun 30 14:00:10.449752 [ 2734.416982] xenbr0: port 2(vif9.0) entered blocking state Jun 30 14:00:10.449824 [ 2734.424654] xenbr0: port 2(vif9.0) entered forwarding state Jun 30 14:00:10.461716 [ 2734.434846] xen-blkback: backend/vbd/9/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 14:00:10.473685 [ 2767.863907] xenbr0: port 2(vif9.0) entered disabled state Jun 30 14:00:43.889828 [ 2768.132475] xenbr0: port 2(vif9.0) entered disabled state Jun 30 14:00:44.165806 [ 2768.142637] vif vif-9-0 vif9.0 (unregistering): left allmulticast mode Jun 30 14:00:44.177837 [ 2768.147813] vif vif-9-0 vif9.0 (unregistering): left promiscuous mode Jun 30 14:00:44.177902 [ 2768.154371] xenbr0: port 2(vif9.0) entered disabled state Jun 30 14:00:44.189775 [ 2793.862532] EXT4-fs (dm-2): unmounting filesystem 1a103862-edc6-49b3-bc1c-56487e345e35. Jun 30 14:01:09.904540 [ 2795.128200] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 14:01:11.165666 [ 2795.269568] EXT4-fs (dm-2): mounted filesystem 1a103862-edc6-49b3-bc1c-56487e345e35 r/w with ordered data mode. Quota mode: disabled. Jun 30 14:01:11.309669 [ 2802.870813] loop0: detected capacity change from 0 to 19531250 Jun 30 14:01:18.897777 [ 2803.193303] xenbr0: port 2(vif10.0) entered blocking state Jun 30 14:01:19.221820 [ 2803.197454] xenbr0: port 2(vif10.0) entered disabled state Jun 30 14:01:19.233724 [ 2803.203024] vif vif-10-0 vif10.0: entered allmulticast mode Jun 30 14:01:19.233757 [ 2803.208799] vif vif-10-0 vif10.0: entered promiscuous mode Jun 30 14:01:19.245703 (XEN) d10v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 14:01:23.436547 (XEN) d10v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 14:01:23.548573 (XEN) d10v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 14:01:23.596530 [ 2810.586665] xen-blkback: backend/vbd/10/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 14:01:26.620580 (XEN) common/grant_table.c:1909:d10v0 Expanding d10 grant table from 1 to 2 frames Jun 30 14:01:26.656575 (XEN) common/grant_table.c:1909:d10v0 Expanding d10 grant table from 2 to 3 frames Jun 30 14:01:26.668481 [ 2810.670239] vif vif-10-0 vif10.0: Guest Rx ready Jun 30 14:01:26.704825 [ 2810.673721] xenbr0: port 2(vif10.0) entered blocking state Jun 30 14:01:26.704899 [ 2810.679080] xenbr0: port 2(vif10.0) entered forwarding state Jun 30 14:01:26.716721 [ 2843.822548] xenbr0: port 2(vif10.0) entered disabled state Jun 30 14:01:59.849843 [ 2844.152518] xenbr0: port 2(vif10.0) entered disabled state Jun 30 14:02:00.185827 [ 2844.157460] vif vif-10-0 vif10.0 (unregistering): left allmulticast mode Jun 30 14:02:00.185905 [ 2844.163490] vif vif-10-0 vif10.0 (unregistering): left promiscuous mode Jun 30 14:02:00.197818 [ 2844.170138] xenbr0: port 2(vif10.0) entered disabled state Jun 30 14:02:00.197881 [ 2869.871459] EXT4-fs (dm-2): unmounting filesystem 1a103862-edc6-49b3-bc1c-56487e345e35. Jun 30 14:02:25.904489 [ 2871.165204] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 14:02:27.200463 [ 2871.306710] EXT4-fs (dm-2): mounted filesystem 1a103862-edc6-49b3-bc1c-56487e345e35 r/w with ordered data mode. Quota mode: disabled. Jun 30 14:02:27.344606 [ 2878.877041] loop0: detected capacity change from 0 to 19531250 Jun 30 14:02:34.916577 [ 2879.203139] xenbr0: port 2(vif11.0) entered blocking state Jun 30 14:02:35.232629 [ 2879.207264] xenbr0: port 2(vif11.0) entered disabled state Jun 30 14:02:35.244630 [ 2879.212876] vif vif-11-0 vif11.0: entered allmulticast mode Jun 30 14:02:35.244630 [ 2879.218619] vif vif-11-0 vif11.0: entered promiscuous mode Jun 30 14:02:35.256594 (XEN) d11v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 14:02:39.445810 (XEN) d11v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 14:02:39.553794 (XEN) d11v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 14:02:39.601741 (XEN) common/grant_table.c:1909:d11v1 Expanding d11 grant table from 1 to 2 frames Jun 30 14:02:42.673883 (XEN) common/grant_table.c:1909:d11v1 Expanding d11 grant table from 2 to 3 frames Jun 30 14:02:42.685821 [ 2886.714424] vif vif-11-0 vif11.0: Guest Rx ready Jun 30 14:02:42.745896 [ 2886.718049] xenbr0: port 2(vif11.0) entered blocking state Jun 30 14:02:42.745975 [ 2886.723431] xenbr0: port 2(vif11.0) entered forwarding state Jun 30 14:02:42.757868 [ 2886.724896] xen-blkback: backend/vbd/11/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 14:02:42.769645 [ 2920.038342] xenbr0: port 2(vif11.0) entered disabled state Jun 30 14:03:16.073710 [ 2920.239208] xenbr0: port 2(vif11.0) entered disabled state Jun 30 14:03:16.265709 [ 2920.246264] vif vif-11-0 vif11.0 (unregistering): left allmulticast mode Jun 30 14:03:16.277722 [ 2920.251608] vif vif-11-0 vif11.0 (unregistering): left promiscuous mode Jun 30 14:03:16.289705 [ 2920.258348] xenbr0: port 2(vif11.0) entered disabled state Jun 30 14:03:16.289740 INIT: Id "T2" respawning too fast: disabled for 5 minutes Jun 30 14:03:40.297860 [ 2946.052350] EXT4-fs (dm-2): unmounting filesystem 1a103862-edc6-49b3-bc1c-56487e345e35. Jun 30 14:03:42.085821 [ 2947.335787] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 14:03:43.372730 [ 2947.477217] EXT4-fs (dm-2): mounted filesystem 1a103862-edc6-49b3-bc1c-56487e345e35 r/w with ordered data mode. Quota mode: disabled. Jun 30 14:03:43.516555 [ 2955.033236] loop0: detected capacity change from 0 to 19531250 Jun 30 14:03:51.068550 [ 2955.358021] xenbr0: port 2(vif12.0) entered blocking state Jun 30 14:03:51.392736 [ 2955.362249] xenbr0: port 2(vif12.0) entered disabled state Jun 30 14:03:51.392808 [ 2955.367729] vif vif-12-0 vif12.0: entered allmulticast mode Jun 30 14:03:51.404609 [ 2955.373579] vif vif-12-0 vif12.0: entered promiscuous mode Jun 30 14:03:51.404609 (XEN) d12v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 14:03:55.596641 (XEN) d12v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 14:03:55.713712 (XEN) d12v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 14:03:55.753687 (XEN) common/grant_table.c:1909:d12v0 Expanding d12 grant table from 1 to 2 frames Jun 30 14:03:58.741772 (XEN) common/grant_table.c:1909:d12v0 Expanding d12 grant table from 2 to 3 frames Jun 30 14:03:58.753713 [ 2962.784878] vif vif-12-0 vif12.0: Guest Rx ready Jun 30 14:03:58.813731 [ 2962.788378] xenbr0: port 2(vif12.0) entered blocking state Jun 30 14:03:58.825756 [ 2962.793325] xen-blkback: backend/vbd/12/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 14:03:58.825829 [ 2962.793726] xenbr0: port 2(vif12.0) entered forwarding state Jun 30 14:03:58.837712 [ 2996.163958] xenbr0: port 2(vif12.0) entered disabled state Jun 30 14:04:32.201713 [ 2996.414485] xenbr0: port 2(vif12.0) entered disabled state Jun 30 14:04:32.441731 [ 2996.422271] vif vif-12-0 vif12.0 (unregistering): left allmulticast mode Jun 30 14:04:32.453762 [ 2996.427626] vif vif-12-0 vif12.0 (unregistering): left promiscuous mode Jun 30 14:04:32.465736 [ 2996.434327] xenbr0: port 2(vif12.0) entered disabled state Jun 30 14:04:32.465799 [ 3022.744746] EXT4-fs (dm-2): unmounting filesystem 1a103862-edc6-49b3-bc1c-56487e345e35. Jun 30 14:04:58.780544 [ 3024.050680] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem Jun 30 14:05:00.085742 [ 3024.203315] EXT4-fs (dm-2): mounted filesystem 1a103862-edc6-49b3-bc1c-56487e345e35 r/w with ordered data mode. Quota mode: disabled. Jun 30 14:05:00.237650 [ 3031.885534] loop0: detected capacity change from 0 to 19531250 Jun 30 14:05:07.921799 [ 3032.220962] xenbr0: port 2(vif13.0) entered blocking state Jun 30 14:05:08.257789 [ 3032.225151] xenbr0: port 2(vif13.0) entered disabled state Jun 30 14:05:08.257855 [ 3032.230665] vif vif-13-0 vif13.0: entered allmulticast mode Jun 30 14:05:08.269767 [ 3032.236503] vif vif-13-0 vif13.0: entered promiscuous mode Jun 30 14:05:08.269831 (XEN) d13v0 Unhandled SMC/HVC: 0x8600ff01 Jun 30 14:05:12.468443 (XEN) d13v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 14:05:12.576514 (XEN) d13v1: vGICD: unhandled word write 0xffffffff to ICACTIVER0 Jun 30 14:05:12.612521 [ 3039.668727] xen-blkback: backend/vbd/13/51712: using 2 queues, protocol 1 (arm-abi) persistent grants Jun 30 14:05:15.697822 (XEN) common/grant_table.c:1909:d13v1 Expanding d13 grant table from 1 to 2 frames Jun 30 14:05:15.721757 (XEN) common/grant_table.c:1909:d13v1 Expanding d13 grant table from 2 to 3 frames Jun 30 14:05:15.733731 [ 3039.754075] vif vif-13-0 vif13.0: Guest Rx ready Jun 30 14:05:15.781765 [ 3039.757520] xenbr0: port 2(vif13.0) entered blocking state Jun 30 14:05:15.781828 [ 3039.764832] xenbr0: port 2(vif13.0) entered forwarding state Jun 30 14:05:15.793723 [ 3070.829561] xenbr0: port 2(vif13.0) entered disabled state Jun 30 14:05:46.857774 [ 3070.995061] xenbr0: port 2(vif13.0) entered disabled state Jun 30 14:05:47.025732 [ 3071.002948] vif vif-13-0 vif13.0 (unregistering): left allmulticast mode Jun 30 14:05:47.037759 [ 3071.008293] vif vif-13-0 vif13.0 (unregistering): left promiscuous mode Jun 30 14:05:47.037824 [ 3071.015056] xenbr0: port 2(vif13.0) entered disabled state Jun 30 14:05:47.049696 [ 3072.298944] EXT4-fs (dm-2): unmounting filesystem 1a103862-edc6-49b3-bc1c-56487e345e35. Jun 30 14:05:48.333688 Jun 30 14:06:06.998654 (XEN) *** Serial input to Xen (type 'CTRL-x' three times to switch input) Jun 30 14:06:07.024600 Jun 30 14:06:07.025335 Jun 30 14:06:07.992217 (XEN) '0' pressed -> dumping Dom0's registers Jun 30 14:06:08.009741 (XEN) *** Dumping Dom0 vcpu#0 state: *** Jun 30 14:06:08.009773 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Jun 30 14:06:08.011047 Not tainted ]---- Jun 30 14:06:08.021610 (XEN) CPU: 0 Jun 30 14:06:08.021634 (XEN) PC: c031be28 Jun 30 14:06:08.021658 (XEN) CPSR: 60070093 MODE:32-bit Guest SVC Jun 30 14:06:08.021682 (XEN) R0: 00000005 R1: 00000000 R2: 004b3011 R3: c031be20 Jun 30 14:06:08.033754 (XEN) R4: c1b09d40 R5: c1d26f50 R6: c1b04e5c R7: c1b04e98 Jun 30 14:06:08.033787 (XEN) R8: 00000000 R9: 00000000 R10:000000ad R11:00000000 R12:c1d264a0 Jun 30 14:06:08.045737 (XEN) USR: SP: bea516c0 LR: b6e85685 Jun 30 14:06:08.045768 (XEN) SVC: SP: c1b01f78 LR: c114e078 SPSR:60070013 Jun 30 14:06:08.045794 (XEN) ABT: SP: c1d38b10 LR: c0301040 SPSR:600b0193 Jun 30 14:06:08.057755 (XEN) UND: SP: c1d38b20 LR: c0300fc0 SPSR:60070093 Jun 30 14:06:08.057787 (XEN) IRQ: SP: c1d38b00 LR: c0300bc0 SPSR:60070193 Jun 30 14:06:08.069698 (XEN) FIQ: SP: c1d38b30 LR: c1d38b30 SPSR:00000000 Jun 30 14:06:08.069735 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Jun 30 14:06:08.069762 (XEN) Jun 30 14:06:08.081689 (XEN) SCTLR: 10c5387d Jun 30 14:06:08.081720 (XEN) TCR: 00000000 Jun 30 14:06:08.081743 (XEN) TTBR0: 0000000065f0806a Jun 30 14:06:08.081766 (XEN) TTBR1: 000000006020406a Jun 30 14:06:08.081789 (XEN) IFAR: b6dc9eb8, IFSR: 00000007 Jun 30 14:06:08.093696 (XEN) DFAR: b6ab8f18, DFSR: 00000017 Jun 30 14:06:08.093728 (XEN) Jun 30 14:06:08.093749 (XEN) VTCR_EL2: 80003558 Jun 30 14:06:08.093771 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 14:06:08.105658 (XEN) Jun 30 14:06:08.105708 (XEN) SCTLR_EL2: 30cd187f Jun 30 14:06:08.105708 (XEN) HCR_EL2: 007c663f Jun 30 14:06:08.105708 (XEN) TTBR0_EL2: 0000000041107000 Jun 30 14:06:08.105708 (XEN) Jun 30 14:06:08.105723 (XEN) ESR_EL2: 07e00000 Jun 30 14:06:08.117692 (XEN) HPFAR_EL2: 00104810 Jun 30 14:06:08.117722 (XEN) HDFAR: e0807f00 Jun 30 14:06:08.117746 (XEN) HIFAR: c0c09f04 Jun 30 14:06:08.117769 (XEN) Jun 30 14:06:08.117790 (XEN) Guest stack trace from sp=c1b01f78: Jun 30 14:06:08.129651 (XEN) Failed to convert stack to physical address Jun 30 14:06:08.129684 (XEN) *** Dumping Dom0 vcpu#1 state: *** Jun 30 14:06:08.129709 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Not tainted ]---- Jun 30 14:06:08.141692 (XEN) CPU: 0 Jun 30 14:06:08.141721 (XEN) PC: c031be28 Jun 30 14:06:08.141743 (XEN) CPSR: 600d0093 MODE:32-bit Guest SVC Jun 30 14:06:08.141768 (XEN) R0: 00000005 R1: 00000000 R2: 002e2b91 R3: c031be20 Jun 30 14:06:08.153694 (XEN) R4: c2110880 R5: c1d26f50 R6: c1b04e5c R7: c1b04e98 Jun 30 14:06:08.153727 (XEN) R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:c1d264a0 Jun 30 14:06:08.165692 (XEN) USR: SP: be9a0938 LR: b6bab853 Jun 30 14:06:08.165723 (XEN) SVC: SP: e08d9fa0 LR: c114e078 SPSR:600d0013 Jun 30 14:06:08.165749 (XEN) ABT: SP: c1d38b50 LR: c0300ec0 SPSR:600f0193 Jun 30 14:06:08.177702 (XEN) UND: SP: c1d38b60 LR: c0300fc0 SPSR:600d0093 Jun 30 14:06:08.177734 (XEN) IRQ: SP: c1d38b40 LR: c0300bc0 SPSR:600d0193 Jun 30 14:06:08.189692 (XEN) FIQ: SP: c1d38b70 LR: c1d38b70 SPSR:00000000 Jun 30 14:06:08.189724 (XEN) FIQ: R8: 00000000 R9: 00000000 R10:00000000 R11:00000000 R12:00000000 Jun 30 14:06:08.201694 (XEN) Jun 30 14:06:08.201723 (XEN) SCTLR: 10c5387d Jun 30 14:06:08.201746 (XEN) TCR: 00000000 Jun 30 14:06:08.201768 (XEN) TTBR0: 0000000065fa406a Jun 30 14:06:08.201791 (XEN) TTBR1: 000000006020406a Jun 30 14:06:08.213692 (XEN) IFAR: b6db4eb8, IFSR: 00000007 Jun 30 14:06:08.213740 (XEN) DFAR: 00518318, DFSR: 0000081f Jun 30 14:06:08.213767 (XEN) Jun 30 14:06:08.213788 (XEN) VTCR_EL2: 80003558 Jun 30 14:06:08.213810 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 14:06:08.225689 (XEN) Jun 30 14:06:08.225717 (XEN) SCTLR_EL2: 30cd187f Jun 30 14:06:08.225741 (XEN) HCR_EL2: 007c663f Jun 30 14:06:08.225764 (XEN) TTBR0_EL2: 0000000041107000 Jun 30 14:06:08.225787 (XEN) Jun 30 14:06:08.225807 (XEN) ESR_EL2: 07e00000 Jun 30 14:06:08.237694 (XEN) HPFAR_EL2: 00104810 Jun 30 14:06:08.237724 (XEN) HDFAR: e0807f00 Jun 30 14:06:08.237747 (XEN) HIFAR: c0c09f04 Jun 30 14:06:08.237770 (XEN) Jun 30 14:06:08.237790 (XEN) Guest stack trace from sp=e08d9fa0: Jun 30 14:06:08.249653 (XEN) Failed to convert stack to physical address Jun 30 14:06:08.249685 Jun 30 14:06:10.031239 (XEN) 'H' pressed -> dumping heap info (now = 3099392438625) Jun 30 14:06:10.053840 (XEN) heap[node=0][zone=0] -> 16275 pages Jun 30 14:06:10.053901 (XEN) heap[node=0][zone=1] -> 0 Jun 30 14:06:10.056225 pages Jun 30 14:06:10.065724 (XEN) heap[node=0][zone=2] -> 0 pages Jun 30 14:06:10.065780 (XEN) heap[node=0][zone=3] -> 0 pages Jun 30 14:06:10.065824 (XEN) heap[node=0][zone=4] -> 0 pages Jun 30 14:06:10.065867 (XEN) heap[node=0][zone=5] -> 0 pages Jun 30 14:06:10.077780 (XEN) heap[node=0][zone=6] -> 0 pages Jun 30 14:06:10.077837 (XEN) heap[node=0][zone=7] -> 0 pages Jun 30 14:06:10.077880 (XEN) heap[node=0][zone=8] -> 0 pages Jun 30 14:06:10.089761 (XEN) heap[node=0][zone=9] -> 0 pages Jun 30 14:06:10.089819 (XEN) heap[node=0][zone=10] -> 0 pages Jun 30 14:06:10.089870 (XEN) heap[node=0][zone=11] -> 0 pages Jun 30 14:06:10.089914 (XEN) heap[node=0][zone=12] -> 0 pages Jun 30 14:06:10.101757 (XEN) heap[node=0][zone=13] -> 0 pages Jun 30 14:06:10.101815 (XEN) heap[node=0][zone=14] -> 0 pages Jun 30 14:06:10.101859 (XEN) heap[node=0][zone=15] -> 0 pages Jun 30 14:06:10.113811 (XEN) heap[node=0][zone=16] -> 0 pages Jun 30 14:06:10.113870 (XEN) heap[node=0][zone=17] -> 0 pages Jun 30 14:06:10.113915 (XEN) heap[node=0][zone=18] -> 0 pages Jun 30 14:06:10.113958 (XEN) heap[node=0][zone=19] -> 130833 pages Jun 30 14:06:10.125764 (XEN) heap[node=0][zone=20] -> 241602 pages Jun 30 14:06:10.125823 (XEN) heap[node=0][zone=21] -> 0 pages Jun 30 14:06:10.125867 (XEN) heap[node=0][zone=22] -> 0 pages Jun 30 14:06:10.137762 (XEN) heap[node=0][zone=23] -> 0 pages Jun 30 14:06:10.137821 (XEN) heap[node=0][zone=24] -> 0 pages Jun 30 14:06:10.137865 (XEN) heap[node=0][zone=25] -> 0 pages Jun 30 14:06:10.149752 (XEN) heap[node=0][zone=26] -> 0 pages Jun 30 14:06:10.149811 (XEN) heap[node=0][zone=27] -> 0 pages Jun 30 14:06:10.149863 (XEN) heap[node=0][zone=28] -> 0 pages Jun 30 14:06:10.149906 Jun 30 14:06:12.059578 Jun 30 14:06:13.797459 Jun 30 14:06:14.032919 Jun 30 14:06:15.801194 Jun 30 14:06:16.045064 (XEN) Dumping timer queues: Jun 30 14:06:16.065861 (XEN) CPU00: Jun 30 14:06:16.065932 (XEN) ex= 7128us timer=43fef968 cb=vtimer.c#virt_timer_expired(43fef960) Jun 30 14:06:16.066007 (XEN) CPU0 Jun 30 14:06:16.068283 1: Jun 30 14:06:16.077707 (XEN) ex= 134903us timer=43fdc968 cb=vtimer.c#virt_timer_expired(43fdc960) Jun 30 14:06:16.077774 Jun 30 14:06:18.039562 Jun 30 14:06:19.809973 Jun 30 14:06:20.051535 (XEN) 'd' pressed -> dumping registers Jun 30 14:06:20.073856 (XEN) Jun 30 14:06:20.073909 (XEN) *** Dumping CPU0 host state: *** Jun 30 14:06:20.073954 (XEN) ----[ Xen-4.19-unstable arm32 debug=y N Jun 30 14:06:20.076273 ot tainted ]---- Jun 30 14:06:20.085729 (XEN) CPU: 0 Jun 30 14:06:20.085780 (XEN) PC: 0025ef7c domain.c#idle_loop+0x130/0x1ac Jun 30 14:06:20.085828 (XEN) CPSR: 6007005a MODE:Hypervisor Jun 30 14:06:20.085874 (XEN) R0: 00000000 R1: 0029f300 R2: 00000000 R3: 00000000 Jun 30 14:06:20.097797 (XEN) R4: 00000000 R5: 002f80e0 R6: 0032b324 R7: 00000001 Jun 30 14:06:20.097858 (XEN) R8: 0032b104 R9: 00000000 R10:40e00000 R11:4003ff54 R12:fffffffc Jun 30 14:06:20.109762 (XEN) HYP: SP: 4003ff44 LR: 00225cb8 Jun 30 14:06:20.109819 (XEN) Jun 30 14:06:20.109858 (XEN) VTCR_EL2: 80003558 Jun 30 14:06:20.109900 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 14:06:20.121758 (XEN) Jun 30 14:06:20.121810 (XEN) SCTLR_EL2: 30cd187f Jun 30 14:06:20.121853 (XEN) HCR_EL2: 007c663f Jun 30 14:06:20.121894 (XEN) TTBR0_EL2: 0000000041107000 Jun 30 14:06:20.121935 (XEN) Jun 30 14:06:20.121972 (XEN) ESR_EL2: 07e00000 Jun 30 14:06:20.133769 (XEN) HPFAR_EL2: 00104810 Jun 30 14:06:20.133825 (XEN) HDFAR: e0807f00 Jun 30 14:06:20.133868 (XEN) HIFAR: c0c09f04 Jun 30 14:06:20.133909 (XEN) Jun 30 14:06:20.133946 (XEN) Xen stack trace from sp=4003ff44: Jun 30 14:06:20.145764 (XEN) 07e00000 00295014 002919ac 4003ff4c 00267818 00000000 00000000 00000000 Jun 30 14:06:20.145841 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 14:06:20.157765 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 14:06:20.157826 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 14:06:20.169778 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 14:06:20.181759 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 14:06:20.181820 (XEN) Xen call trace: Jun 30 14:06:20.181862 (XEN) [<0025ef7c>] domain.c#idle_loop+0x130/0x1ac (PC) Jun 30 14:06:20.193760 (XEN) [<00225cb8>] rcu_needs_cpu+0x40/0x60 (LR) Jun 30 14:06:20.193819 (XEN) [<00267818>] arch_get_xen_caps+0/0x90 Jun 30 14:06:20.193866 (XEN) Jun 30 14:06:20.205758 (XEN) *** Dumping CPU1 host state: *** Jun 30 14:06:20.205816 (XEN) ----[ Xen-4.19-unstable arm32 debug=y Not tainted ]---- Jun 30 14:06:20.205865 (XEN) CPU: 1 Jun 30 14:06:20.205905 (XEN) PC: 0025ef7c domain.c#idle_loop+0x130/0x1ac Jun 30 14:06:20.217766 (XEN) CPSR: 600d005a MODE:Hypervisor Jun 30 14:06:20.217824 (XEN) R0: 00000000 R1: 0029f300 R2: 3fd0e000 R3: 00000000 Jun 30 14:06:20.229754 (XEN) R4: 00000001 R5: 002f80e0 R6: 0032b324 R7: 00000002 Jun 30 14:06:20.229815 (XEN) R8: 0032b104 R9: 00000001 R10:40e00000 R11:4000ff54 R12:fffffffc Jun 30 14:06:20.241764 (XEN) HYP: SP: 4000ff44 LR: 00225cb8 Jun 30 14:06:20.241821 (XEN) Jun 30 14:06:20.241861 (XEN) VTCR_EL2: 80003558 Jun 30 14:06:20.241902 (XEN) VTTBR_EL2: 00010000bef8e000 Jun 30 14:06:20.241944 (XEN) Jun 30 14:06:20.241981 (XEN) SCTLR_EL2: 30cd187f Jun 30 14:06:20.253755 (XEN) HCR_EL2: 007c663f Jun 30 14:06:20.253810 (XEN) TTBR0_EL2: 00000000ba004000 Jun 30 14:06:20.253853 (XEN) Jun 30 14:06:20.253891 (XEN) ESR_EL2: 07e00000 Jun 30 14:06:20.253931 (XEN) HPFAR_EL2: 00104810 Jun 30 14:06:20.265764 (XEN) HDFAR: e0807f00 Jun 30 14:06:20.265819 (XEN) HIFAR: c141f6d0 Jun 30 14:06:20.265862 (XEN) Jun 30 14:06:20.265900 (XEN) Xen stack trace from sp=4000ff44: Jun 30 14:06:20.265943 (XEN) 07e00000 002f9290 00000001 4000ff3c 002680f4 00000000 00000000 00000000 Jun 30 14:06:20.277736 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 14:06:20.289762 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 14:06:20.289824 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 14:06:20.301757 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 14:06:20.301818 (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Jun 30 14:06:20.313768 (XEN) Xen call trace: Jun 30 14:06:20.313824 (XEN) [<0025ef7c>] domain.c#idle_loop+0x130/0x1ac (PC) Jun 30 14:06:20.313873 (XEN) [<00225cb8>] rcu_needs_cpu+0x40/0x60 (LR) Jun 30 14:06:20.325768 (XEN) [<002680f4>] start_secondary+0x204/0x20c Jun 30 14:06:20.325827 (XEN) Jun 30 14:06:20.325867 [ 3104.304200] dwmmc_exynos 12200000.mmc: Unexpected interrupt latency Jun 30 14:06:20.337718 Jun 30 14:06:22.051834 (XEN) 'e' pressed -> dumping event-channel info Jun 30 14:06:22.077824 (XEN) Event channel information for domain 0: Jun 30 14:06:22.077879 (XEN) Polling vCPUs: {} Jun 30 14:06:22.077923 (XEN) port Jun 30 14:06:22.080140 [p/m/s] Jun 30 14:06:22.089717 (XEN) 1 [0/0/ - ]: s=3 n=1 x=0 d=0 p=4 Jun 30 14:06:22.089775 (XEN) 2 [0/0/ - ]: s=5 n=0 x=0 v=2 Jun 30 14:06:22.089831 (XEN) 3 [0/0/ - ]: s=5 n=1 x=0 v=3 Jun 30 14:06:22.101695 (XEN) 4 [0/0/ - ]: s=3 n=0 x=0 d=0 p=1 Jun 30 14:06:22.101755 Jun 30 14:06:24.054922 (XEN) gnttab_usage_print_all [ key 'g' pressed Jun 30 14:06:24.069822 (XEN) -------- active -------- -------- shared -------- Jun 30 14:06:24.069870 (XEN) [ref] localdo Jun 30 14:06:24.072206 m mfn pin localdom gmfn flags Jun 30 14:06:24.081731 (XEN) grant-table for remote d0 (v1) Jun 30 14:06:24.081787 (XEN) 1 frames (64 max), 7 maptrack frames (1024 max) Jun 30 14:06:24.093773 (XEN) no active grant table entries Jun 30 14:06:24.093831 (XEN) gnttab_usage_print_all ] done Jun 30 14:06:24.093877 Jun 30 14:06:26.047332 Jun 30 14:06:27.825540 Jun 30 14:06:28.033817 (XEN) Physical memory information: Jun 30 14:06:28.049904 (XEN) Xen heap: 65100kB free Jun 30 14:06:28.049904 (XEN) heap[19]: 523332kB free Jun 30 14:06:28.049908 (XEN) heap[20]: 966408kB fr Jun 30 14:06:28.052739 ee Jun 30 14:06:28.061604 (XEN) Dom heap: 1489740kB free Jun 30 14:06:28.061604 Jun 30 14:06:30.036739 Jun 30 14:06:31.833693 Jun 30 14:06:32.040029 (XEN) sched_smt_power_savings: disabled Jun 30 14:06:32.061895 (XEN) NOW=3121393808791 Jun 30 14:06:32.061895 (XEN) Online Cpus: 0-1 Jun 30 14:06:32.061895 (XEN) Cpupool 0: Jun 30 14:06:32.061895 (XEN) Cpus: 0-1 Jun 30 14:06:32.061895 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resour Jun 30 14:06:32.064577 ce Jun 30 14:06:32.073731 (XEN) Scheduler: SMP Credit Scheduler rev2 (credit2) Jun 30 14:06:32.073731 (XEN) Active queues: 1 Jun 30 14:06:32.073731 (XEN) default-weight = 256 Jun 30 14:06:32.073736 (XEN) Runqueue 0: Jun 30 14:06:32.073758 (XEN) ncpus = 2 Jun 30 14:06:32.085791 (XEN) cpus = 0-1 Jun 30 14:06:32.085818 (XEN) max_weight = 256 Jun 30 14:06:32.085863 (XEN) pick_bias = 0 Jun 30 14:06:32.085906 (XEN) instload = 0 Jun 30 14:06:32.097909 (XEN) aveload = 1609 (~0%) Jun 30 14:06:32.097969 (XEN) idlers: 2 Jun 30 14:06:32.098011 (XEN) tickled: 0 Jun 30 14:06:32.098052 (XEN) fully idle cores: 2 Jun 30 14:06:32.098095 (XEN) Domain info: Jun 30 14:06:32.110003 (XEN) Domain: 0 w 256 c 0 v 2 Jun 30 14:06:32.110003 (XEN) 1: [0.0] flags=0 cpu=0 credit=7020415 [w=256] load=1157 (~0%) Jun 30 14:06:32.110042 (XEN) 2: [0.1] flags=0 cpu=1 credit=8620250 [w=256] load=533 (~0%) Jun 30 14:06:32.121771 (XEN) Runqueue 0: Jun 30 14:06:32.121771 (XEN) CPU[00] runq=0, sibling={0}, core={0-1} Jun 30 14:06:32.121771 (XEN) CPU[01] runq=0, sibling={1}, core={0-1} Jun 30 14:06:32.133965 (XEN) RUNQ: Jun 30 14:06:32.134020 (XEN) CPUs info: Jun 30 14:06:32.134062 (XEN) CPU[00] current=d[IDLE]v0, curr=d[IDLE]v0, prev=NULL Jun 30 14:06:32.134109 (XEN) CPU[01] current=d[IDLE]v1, curr=d[IDLE]v1, prev=NULL Jun 30 14:06:32.145739 Jun 30 14:06:34.044568 Jun 30 14:06:35.842070 Jun 30 14:06:36.045423 (XEN) Synced stime skew: max=125ns avg=125ns samples=1 current=125ns Jun 30 14:06:36.061957 (XEN) Synced cycles skew: max=1 avg=1 samples=1 current=1 Jun 30 14:06:36.061957 Jun 30 14:06:36.064138 Jun 30 14:06:38.044054 Jun 30 14:06:39.848462 Jun 30 14:06:40.078212 Jun 30 14:06:41.852894 Jun 30 14:06:42.086495 Jun 30 14:06:43.861597 Jun 30 14:06:54.094807 (XEN) 'q' pressed -> dumping domain info (now = 3143454406291) Jun 30 14:06:54.120832 (XEN) General information for domain 0: Jun 30 14:06:54.120891 (XEN) refcnt=3 dying=0 pause_count=0 Jun 30 14:06:54.120936 (XEN) nr_page Jun 30 14:06:54.123705 s=131072 xenheap_pages=2 dirty_cpus={} max_pages=131072 Jun 30 14:06:54.132520 (XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=00000020 Jun 30 14:06:54.132520 (XEN) p2m mappings for domain 0 (vmid 1): Jun 30 14:06:54.144616 (XEN) 1G mappings: 0 (shattered 0) Jun 30 14:06:54.144616 (XEN) 2M mappings: 231 (shattered 25) Jun 30 14:06:54.144616 (XEN) 4K mappings: 5481 Jun 30 14:06:54.156644 (XEN) Rangesets belonging to domain 0: Jun 30 14:06:54.156644 (XEN) Interrupts { 32-72, 74, 77-79, 82-84, 86, 88-100, 103-104, 107-110, 114, 116-120, 123, 126-128, 138, 144, 146-147, 149-151, 156 } Jun 30 14:06:54.168639 (XEN) I/O Memory { 2020-2050, 3810-3811, 3830-3831, 3860-3861, 10000-10001, 10010-10045, 10050-10055, 10060-10061, 101b0-101b1, 101d0-101d1, 101e0-101e1, 10440-10441, 10800-10801, 10830-10831, 10850-10851, 10a60-10a61, 10d10-10d11, 11000-11010, 11200-11201, 11210-11211, 11400-11401, 11800-11805, 11c00-11c01, 11c10-11c11, 11d40-11d41, 11f20-11f21, 12000-12010, 12100-12101, 12110-12111, 12120-12121, 12130-12131, 12170-12171, 121a0-121a1, 121b0-121b1, 121d0-121d1, 12200-12201, 12210-12211, 12220-12221, 12230-12231, 12250-12251, 122f0-122f1, 12c00-12c01, 12c10-12c11, 12c30-12c31, 12c60-12c61, 12c70-12c71, 12c80-12c81, 12c90-12c91, 12ca0-12ca1, 12cb0-12cb1, 12cc0-12cc1, 12cd0-12cd1, 12ce0-12ce1, 12d10-12d11, 12d20-12d21, 12d30-12d31, 12d40-12d41, 12d60-12d61, 12d70-12d71, 12dd0-12dd1, 13260-13261, 13270-13271, 13280-13281, 13290-13291, 132a0-132a1, 132b0-132b1, 132c0-132c1, 132d0-132d1, 132e0-132e1, 132f0-132f1, 13400-13401, 13c40-13c41, 13c50-13c51, 13e00-13e01, 13e10-13e11, 13e20-13e21, 13e30-13e31, 13e80-13e81, 13e90-13e91, 13ea0-13ea1, 13eb0-13eb1, 14400-14440, 14450-14460, 14500-14510, 14530-145a0, 145b0-145b1, 14640-14641, 14650-14651 } Jun 30 14:06:54.264629 (XEN) NODE affinity for domain 0: [0] Jun 30 14:06:54.276643 (XEN) VCPU information and callbacks for domain 0: Jun 30 14:06:54.276643 (XEN) UNIT0 affinities: hard={0-1} soft={0-1} Jun 30 14:06:54.276643 (XEN) VCPU0: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Jun 30 14:06:54.288631 (XEN) pause_count=0 pause_flags=1 Jun 30 14:06:54.288631 (XEN) GICH_LRs (vcpu 0) mask=0 Jun 30 14:06:54.288631 (XEN) VCPU_LR[0]=0 Jun 30 14:06:54.288631 (XEN) VCPU_LR[1]=0 Jun 30 14:06:54.300649 (XEN) VCPU_LR[2]=0 Jun 30 14:06:54.300649 (XEN) VCPU_LR[3]=0 Jun 30 14:06:54.300649 (XEN) No periodic timer Jun 30 14:06:54.300649 (XEN) UNIT1 affinities: hard={0-1} soft={0-1} Jun 30 14:06:54.300649 (XEN) VCPU1: CPU1 [has=F] poll=0 upcall_pend=00 upcall_mask=01 Jun 30 14:06:54.312624 (XEN) pause_count=0 pause_flags=1 Jun 30 14:06:54.312624 (XEN) GICH_LRs (vcpu 1) mask=0 Jun 30 14:06:54.312624 (XEN) VCPU_LR[0]=0 Jun 30 14:06:54.324624 (XEN) VCPU_LR[1]=0 Jun 30 14:06:54.324624 (XEN) VCPU_LR[2]=0 Jun 30 14:06:54.324624 (XEN) VCPU_LR[3]=0 Jun 30 14:06:54.324624 (XEN) No periodic timer Jun 30 14:06:54.324624 (XEN) Notifying guest 0:0 (virq 1, port 0) Jun 30 14:06:54.336793 (XEN) Notifying guest 0:1 (virq 1, port 0) Jun 30 14:06:54.336842 Jun 30 14:07:06.077902 (XEN) *** Serial input to DOM0 (type 'CTRL-x' three times to switch input) Jun 30 14:07:06.092698 Jun 30 14:07:06.092698 arndale-metrocentre login: Jun 30 14:07:06.094403