[ 0.000000] Linux version 6.10.0-rc5+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Sun Jun 30 15:39:15 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/italia1--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009afff] usable [ 0.000000] Xen: [mem 0x000000000009bc00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020064fff] usable [ 0.000000] Xen: [mem 0x00000000ab9ba000-0x00000000bba3afff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000bc60a000-0x00000000bc73ffff] reserved [ 0.000000] Xen: [mem 0x00000000beaee000-0x00000000beaf8fff] reserved [ 0.000000] Xen: [mem 0x00000000beb05000-0x00000000beb15fff] reserved [ 0.000000] Xen: [mem 0x00000000bed3a000-0x00000000beddffff] reserved [ 0.000000] Xen: [mem 0x00000000bede0000-0x00000000befdffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000befe0000-0x00000000beffefff] ACPI data [ 0.000000] Xen: [mem 0x00000000bf000000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed19000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed90fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Intel Corporation SandyBridge Platform/To be filled by O.E.M., BIOS S1200BT.86B.02.00.0042.050820141549 05/08/2014 [ 0.000000] DMI: Memory slots populated: 1/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000023] Xen PV: Detected 4 vCPUS [ 0.000486] tsc: Detected 3092.972 MHz processor [ 0.000903] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000906] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000913] last_pfn = 0x20065 max_arch_pfn = 0x400000000 [ 0.000915] MTRR map: 3 entries (0 fixed + 3 variable; max 20), built from 10 variable MTRRs [ 0.000916] MTRRs set to read-only [ 0.000920] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000956] Kernel/User page tables isolation: disabled on XEN PV. [ 0.024531] RAMDISK: [mem 0x04000000-0x0545cfff] [ 0.024537] ACPI: Early table checksum verification disabled [ 0.034065] ACPI: RSDP 0x00000000000F0410 000024 (v02 INTEL ) [ 0.034076] ACPI: XSDT 0x00000000BEFFDE18 0000BC (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034110] ACPI: FACP 0x00000000BEFFCA98 0000F4 (v04 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034151] ACPI: DSDT 0x00000000BEFEE018 00CE48 (v02 INTEL S1200BTS 00000000 INTL 20100331) [ 0.034167] ACPI: FACS 0x00000000BEFFDD40 000040 [ 0.034183] ACPI: APIC 0x00000000BEFFB018 000652 (v03 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034199] ACPI: SPMI 0x00000000BEFFEC18 000040 (v05 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034215] ACPI: MCFG 0x00000000BEFFEB98 00003C (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034231] ACPI: WDDT 0x00000000BEFFEF18 000040 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034247] ACPI: HPET 0x00000000BEFFEE98 000038 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034264] ACPI: SSDT 0x00000000BEFEB018 0010A8 (v02 INTEL S1200BTS 00001000 INTL 20100331) [ 0.034280] ACPI: BOOT 0x00000000BEFFEE18 000028 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034296] ACPI: SSDT 0x00000000BEFE7698 0005E0 (v02 INTEL S1200BTS 00003000 INTL 20100331) [ 0.034312] ACPI: SSDT 0x00000000BEFE6018 000A92 (v02 INTEL S1200BTS 00003000 INTL 20100331) [ 0.034328] ACPI: SSDT 0x00000000BEFEA598 00054D (v01 INTEL S1200BTS 00001000 INTL 20100331) [ 0.034344] ACPI: SSDT 0x00000000BEFFDB18 000069 (v01 INTEL S1200BTS 00001000 INTL 20100331) [ 0.034360] ACPI: SSDT 0x00000000BEFE9E18 00017B (v02 INTEL S1200BTS 00002000 INTL 20100331) [ 0.034377] ACPI: RMAD 0x00000000BEFE8F18 000078 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034393] ACPI: SPCR 0x00000000BEFFED98 000050 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034409] ACPI: HEST 0x00000000BEFFCF18 0000A8 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034425] ACPI: BERT 0x00000000BEFFED18 000030 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034441] ACPI: ERST 0x00000000BEFE8C98 000230 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034457] ACPI: EINJ 0x00000000BEFFC918 000130 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034466] ACPI: Reserving FACP table memory at [mem 0xbeffca98-0xbeffcb8b] [ 0.034467] ACPI: Reserving DSDT table memory at [mem 0xbefee018-0xbeffae5f] [ 0.034468] ACPI: Reserving FACS table memory at [mem 0xbeffdd40-0xbeffdd7f] [ 0.034469] ACPI: Reserving APIC table memory at [mem 0xbeffb018-0xbeffb669] [ 0.034470] ACPI: Reserving SPMI table memory at [mem 0xbeffec18-0xbeffec57] [ 0.034471] ACPI: Reserving MCFG table memory at [mem 0xbeffeb98-0xbeffebd3] [ 0.034471] ACPI: Reserving WDDT table memory at [mem 0xbeffef18-0xbeffef57] [ 0.034472] ACPI: Reserving HPET table memory at [mem 0xbeffee98-0xbeffeecf] [ 0.034473] ACPI: Reserving SSDT table memory at [mem 0xbefeb018-0xbefec0bf] [ 0.034474] ACPI: Reserving BOOT table memory at [mem 0xbeffee18-0xbeffee3f] [ 0.034475] ACPI: Reserving SSDT table memory at [mem 0xbefe7698-0xbefe7c77] [ 0.034475] ACPI: Reserving SSDT table memory at [mem 0xbefe6018-0xbefe6aa9] [ 0.034476] ACPI: Reserving SSDT table memory at [mem 0xbefea598-0xbefeaae4] [ 0.034477] ACPI: Reserving SSDT table memory at [mem 0xbeffdb18-0xbeffdb80] [ 0.034478] ACPI: Reserving SSDT table memory at [mem 0xbefe9e18-0xbefe9f92] [ 0.034478] ACPI: Reserving RMAD table memory at [mem 0xbefe8f18-0xbefe8f8f] [ 0.034479] ACPI: Reserving SPCR table memory at [mem 0xbeffed98-0xbeffede7] [ 0.034480] ACPI: Reserving HEST table memory at [mem 0xbeffcf18-0xbeffcfbf] [ 0.034481] ACPI: Reserving BERT table memory at [mem 0xbeffed18-0xbeffed47] [ 0.034482] ACPI: Reserving ERST table memory at [mem 0xbefe8c98-0xbefe8ec7] [ 0.034482] ACPI: Reserving EINJ table memory at [mem 0xbeffc918-0xbeffca47] [ 0.034577] APIC: Switched APIC routing to: Xen PV [ 0.039325] Zone ranges: [ 0.039327] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.039329] DMA32 [mem 0x0000000001000000-0x0000000020064fff] [ 0.039330] Normal empty [ 0.039331] Movable zone start for each node [ 0.039332] Early memory node ranges [ 0.039332] node 0: [mem 0x0000000000001000-0x000000000009afff] [ 0.039334] node 0: [mem 0x0000000000100000-0x0000000020064fff] [ 0.039335] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020064fff] [ 0.039339] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.039378] On node 0, zone DMA: 101 pages in unavailable ranges [ 0.041168] On node 0, zone DMA32: 32667 pages in unavailable ranges [ 0.041173] p2m virtual area at (____ptrval____), size is 40000000 [ 0.177287] Remapped 101 page(s) [ 0.177991] ACPI: PM-Timer IO Port: 0x408 [ 0.178153] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.178198] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.178225] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.178229] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.178282] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.178287] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.178297] ACPI: SPCR: SPCR table version 1 [ 0.178300] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.178309] CPU topo: Max. logical packages: 1 [ 0.178310] CPU topo: Max. logical dies: 1 [ 0.178311] CPU topo: Max. dies per package: 1 [ 0.178316] CPU topo: Max. threads per core: 1 [ 0.178317] CPU topo: Num. cores per package: 4 [ 0.178317] CPU topo: Num. threads per package: 4 [ 0.178318] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.178333] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.178335] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009bfff] [ 0.178336] PM: hibernation: Registered nosave memory: [mem 0x0009c000-0x000fffff] [ 0.178338] [mem 0x20065000-0xab9b9fff] available for PCI devices [ 0.178347] Booting kernel on Xen [ 0.178348] Xen version: 4.19-unstable (preserve-AD) [ 0.178351] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.183774] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.184215] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u524288 [ 0.184221] pcpu-alloc: s194408 r8192 d30872 u524288 alloc=1*2097152 [ 0.184223] pcpu-alloc: [0] 0 1 2 3 [ 0.184273] xen: PV spinlocks enabled [ 0.184276] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.184278] Kernel command line: placeholder root=/dev/mapper/italia1--vg-root ro console=hvc0 [ 0.184314] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.184405] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.184450] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.185139] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.185142] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.185144] software IO TLB: area num 4. [ 0.247984] Memory: 385780K/524284K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 138252K reserved, 0K cma-reserved) [ 0.248160] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.250363] Dynamic Preempt: voluntary [ 0.250531] rcu: Preemptible hierarchical RCU implementation. [ 0.250533] rcu: RCU event tracing is enabled. [ 0.250533] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.250535] Trampoline variant of Tasks RCU enabled. [ 0.250535] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.250537] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.250559] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.262594] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.262750] xen:events: Using FIFO-based ABI [ 0.262781] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.262791] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.262800] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.262808] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.262817] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.262825] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.262834] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.262842] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.262851] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.262859] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.262869] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.262878] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.262887] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.262895] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.262904] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.262914] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.268178] Console: colour VGA+ 80x25 [ 0.268181] printk: legacy console [tty0] enabled [ 0.284409] printk: legacy console [hvc0] enabled [ 0.285838] ACPI: Core revision 20240322 [ 0.290436] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.290594] Xen: using vcpuop timer interface [ 0.290600] installing Xen timer for CPU 0 [ 0.290755] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c955856658, max_idle_ns: 440795256416 ns [ 0.290915] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.94 BogoMIPS (lpj=3092972) [ 0.291221] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.291340] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.291509] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.291656] Spectre V2 : Mitigation: Retpolines [ 0.291922] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.292069] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.292189] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.292310] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.292458] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.292921] MDS: Mitigation: Clear CPU buffers [ 0.293071] MMIO Stale Data: Unknown: No mitigations [ 0.293204] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.293349] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.293467] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.293586] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.293704] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.312583] Freeing SMP alternatives memory: 40K [ 0.312709] pid_max: default: 32768 minimum: 301 [ 0.312838] LSM: initializing lsm=capability,selinux [ 0.312920] SELinux: Initializing. [ 0.313053] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.313201] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.313720] cpu 0 spinlock event irq 25 [ 0.313836] VPMU disabled by hypervisor. [ 0.314475] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.314628] signal: max sigframe size: 1776 [ 0.314817] rcu: Hierarchical SRCU implementation. [ 0.314920] rcu: Max phase no-delay instances is 400. [ 0.315499] smp: Bringing up secondary CPUs ... [ 0.315885] installing Xen timer for CPU 1 [ 0.316363] installing Xen timer for CPU 2 [ 0.316837] installing Xen timer for CPU 3 [ 0.028997] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0002 [ 0.317038] cpu 1 spinlock event irq 45 [ 0.028997] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0004 [ 0.317224] cpu 2 spinlock event irq 46 [ 0.028997] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0006 [ 0.317959] cpu 3 spinlock event irq 47 [ 0.319037] smp: Brought up 1 node, 4 CPUs [ 0.319275] devtmpfs: initialized [ 0.319275] x86/mm: Memory block size: 128MB [ 0.319990] ACPI: PM: Registering ACPI NVS region [mem 0xab9ba000-0xbba3afff] (268963840 bytes) [ 0.322182] ACPI: PM: Registering ACPI NVS region [mem 0xbede0000-0xbefdffff] (2097152 bytes) [ 0.322390] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.322545] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.322787] PM: RTC time: 16:37:06, date: 2024-06-30 [ 0.323126] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.323270] xen:grant_table: Grant tables using version 1 layout [ 0.323416] Grant table initialized [ 0.323651] audit: initializing netlink subsys (disabled) [ 0.323784] audit: type=2000 audit(1719765427.650:1): state=initialized audit_enabled=0 res=1 [ 0.323983] thermal_sys: Registered thermal governor 'step_wise' [ 0.323983] thermal_sys: Registered thermal governor 'user_space' [ 0.324169] Simple Boot Flag at 0x4f set to 0x1 [ 0.324419] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.324972] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f] [ 0.325125] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved as E820 entry [ 0.364222] PCI: Using configuration type 1 for base access [ 0.364429] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.364964] ACPI: Added _OSI(Module Device) [ 0.365063] ACPI: Added _OSI(Processor Device) [ 0.365177] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.365291] ACPI: Added _OSI(Processor Aggregator Device) [ 0.372056] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.372835] xen: registering gsi 9 triggering 0 polarity 0 [ 0.373294] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.376933] ACPI: Dynamic OEM Table Load: [ 0.377054] ACPI: SSDT 0xFFFF888003937000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20100331) [ 0.377773] ACPI: Dynamic OEM Table Load: [ 0.377891] ACPI: SSDT 0xFFFF88800399E400 000303 (v01 PmRef ApIst 00003000 INTL 20100331) [ 0.378360] ACPI: Dynamic OEM Table Load: [ 0.378476] ACPI: SSDT 0xFFFF888003980A00 000119 (v01 PmRef ApCst 00003000 INTL 20100331) [ 0.379452] ACPI: _OSC evaluated successfully for all CPUs [ 0.379709] ACPI: Interpreter enabled [ 0.379837] ACPI: PM: (supports S0 S1 S3 S5) [ 0.379919] ACPI: Using IOAPIC for interrupt routing [ 0.380062] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.380213] PCI: Using E820 reservations for host bridge windows [ 0.380606] ACPI: Enabled 10 GPEs in block 00 to 3F [ 0.389061] acpi ABCDEFGH:00: ACPI dock station (docks/bays count: 1) [ 0.391754] ACPI: \_TZ_.FN00: New power resource [ 0.391936] ACPI: \_TZ_.FN01: New power resource [ 0.392112] ACPI: \_TZ_.FN02: New power resource [ 0.392286] ACPI: \_TZ_.FN03: New power resource [ 0.392459] ACPI: \_TZ_.FN04: New power resource [ 0.393343] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.393469] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.394054] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.394792] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.394918] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.395569] PCI host bridge to bus 0000:00 [ 0.395721] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.395843] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.395920] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.396065] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000e7fff window] [ 0.396209] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window] [ 0.396353] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.396498] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.396655] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000 conventional PCI endpoint [ 0.397402] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 conventional PCI endpoint [ 0.397627] pci 0000:00:19.0: BAR 0 [mem 0xc1b00000-0xc1b1ffff] [ 0.397787] pci 0000:00:19.0: BAR 1 [mem 0xc1b70000-0xc1b70fff] [ 0.397948] pci 0000:00:19.0: BAR 2 [io 0x4040-0x405f] [ 0.398466] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.398818] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 conventional PCI endpoint [ 0.398995] pci 0000:00:1a.0: BAR 0 [mem 0xc1b60000-0xc1b603ff] [ 0.399541] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.399941] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 PCIe Root Port [ 0.400246] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.400379] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.400510] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc19fffff] [ 0.400683] pci 0000:00:1c.0: bridge window [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.401173] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.401388] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.401510] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.401829] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 PCIe Root Port [ 0.402081] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.402214] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.402402] pci 0000:00:1c.4: bridge window [mem 0xc1a00000-0xc1afffff] [ 0.402865] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.403008] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.403128] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.403458] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 conventional PCI endpoint [ 0.403725] pci 0000:00:1d.0: BAR 0 [mem 0xc1b50000-0xc1b503ff] [ 0.404271] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.404604] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 conventional PCI bridge [ 0.404905] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.405107] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc0ffffff] [ 0.405575] pci 0000:00:1f.0: [8086:1c52] type 00 class 0x060100 conventional PCI endpoint [ 0.406374] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 conventional PCI endpoint [ 0.406641] pci 0000:00:1f.2: BAR 0 [io 0x4090-0x4097] [ 0.406796] pci 0000:00:1f.2: BAR 1 [io 0x4080-0x4083] [ 0.406954] pci 0000:00:1f.2: BAR 2 [io 0x4070-0x4077] [ 0.407110] pci 0000:00:1f.2: BAR 3 [io 0x4060-0x4063] [ 0.407265] pci 0000:00:1f.2: BAR 4 [io 0x4020-0x403f] [ 0.407420] pci 0000:00:1f.2: BAR 5 [mem 0xc1b40000-0xc1b407ff] [ 0.407824] pci 0000:00:1f.2: PME# supported from D3hot [ 0.408111] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 conventional PCI endpoint [ 0.408356] pci 0000:00:1f.3: BAR 0 [mem 0xc1b30000-0xc1b300ff 64bit] [ 0.408597] pci 0000:00:1f.3: BAR 4 [io 0x4000-0x401f] [ 0.409094] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.409583] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.409826] pci 0000:02:00.0: BAR 0 [mem 0xc1a00000-0xc1a1ffff] [ 0.410026] pci 0000:02:00.0: BAR 2 [io 0x2000-0x201f] [ 0.410195] pci 0000:02:00.0: BAR 3 [mem 0xc1a20000-0xc1a23fff] [ 0.410857] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.411346] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.411610] pci_bus 0000:03: extended config space not accessible [ 0.411789] pci 0000:03:02.0: [126f:0712] type 00 class 0x030000 conventional PCI endpoint [ 0.411995] pci 0000:03:02.0: BAR 0 [mem 0xc0000000-0xc0ffffff] [ 0.412395] pci 0000:03:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.413031] pci 0000:03:02.0: supports D1 D2 [ 0.413447] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.413616] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.413764] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.413912] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.414056] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000e7fff window] (subtractive decode) [ 0.414205] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff window] (subtractive decode) [ 0.414355] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.414616] pci_bus 0000:00: on NUMA node 0 [ 0.414838] xen: registering gsi 13 triggering 1 polarity 0 [ 0.415346] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.415537] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.415726] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.415845] ACPI: PCI: Interrupt link LNKC disabled [ 0.416045] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.416234] ACPI: PCI: Interrupt link LNKE configured for IRQ 3 [ 0.416422] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 0.416610] ACPI: PCI: Interrupt link LNKG configured for IRQ 5 [ 0.416798] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.416919] ACPI: PCI: Interrupt link LNKH disabled [ 0.417394] xen:balloon: Initialising balloon driver [ 0.417527] iommu: Default domain type: Translated [ 0.417527] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.417970] SCSI subsystem initialized [ 0.418097] libata version 3.00 loaded. [ 0.418097] ACPI: bus type USB registered [ 0.418097] usbcore: registered new interface driver usbfs [ 0.418204] usbcore: registered new interface driver hub [ 0.418327] usbcore: registered new device driver usb [ 0.418506] pps_core: LinuxPPS API ver. 1 registered [ 0.418919] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.419073] PTP clock support registered [ 0.419207] Advanced Linux Sound Architecture Driver Initialized. [ 0.419256] NetLabel: Initializing [ 0.419369] NetLabel: domain hash size = 128 [ 0.419920] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.420090] NetLabel: unlabeled traffic allowed by default [ 0.420230] PCI: Using ACPI for IRQ routing [ 0.431571] PCI: pci_cache_line_size set to 64 bytes [ 0.431719] e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff] [ 0.431721] e820: reserve RAM buffer [mem 0x20065000-0x23ffffff] [ 0.431744] pci 0000:03:02.0: vgaarb: setting as boot VGA device [ 0.431744] pci 0000:03:02.0: vgaarb: bridge control possible [ 0.431744] pci 0000:03:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.431919] vgaarb: loaded [ 0.433579] clocksource: Switched to clocksource tsc-early [ 0.433760] VFS: Disk quotas dquot_6.6.0 [ 0.433879] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.433879] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.433879] pnp: PnP ACPI init [ 0.433879] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.433879] system 00:00: [io 0xffff] has been reserved [ 0.433976] system 00:00: [io 0xffff] has been reserved [ 0.434092] system 00:00: [io 0xffff] has been reserved [ 0.434207] system 00:00: [io 0x0400-0x0453] has been reserved [ 0.434351] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.434351] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.434351] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.434351] system 00:00: [io 0x0900-0x090f] has been reserved [ 0.434351] system 00:00: [io 0x0295-0x0296] has been reserved [ 0.434999] xen: registering gsi 8 triggering 1 polarity 0 [ 0.435060] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.435458] xen: registering gsi 4 triggering 1 polarity 0 [ 0.435463] Already setup the GSI :4 [ 0.436028] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.436153] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.436274] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.436394] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.436514] system 00:04: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.436634] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.436755] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.436877] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.437010] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved [ 0.437183] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.437303] system 00:04: [mem 0xc1b90000-0xc1b90fff] has been reserved [ 0.437690] system 00:05: [mem 0x00000000-0x0009cfff] could not be reserved [ 0.437859] pnp: PnP ACPI: found 6 devices [ 0.466526] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.466674] NET: Registered PF_INET protocol family [ 0.466822] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.467142] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.467294] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.467441] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.467595] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.467761] TCP: Hash tables configured (established 4096 bind 4096) [ 0.467898] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.468068] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.468245] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.468554] RPC: Registered named UNIX socket transport module. [ 0.468676] RPC: Registered udp transport module. [ 0.468791] RPC: Registered tcp transport module. [ 0.468905] RPC: Registered tcp-with-tls transport module. [ 0.469089] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.469528] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.469654] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.469791] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc19fffff] [ 0.469938] pci 0000:00:1c.0: bridge window [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.470108] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.470230] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.470404] pci 0000:00:1c.4: bridge window [mem 0xc1a00000-0xc1afffff] [ 0.470560] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 0.470693] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc0ffffff] [ 0.470848] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.470978] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.471097] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.471218] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000e7fff window] [ 0.471340] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfeafffff window] [ 0.471461] pci_bus 0000:00: resource 9 [mem 0xfed40000-0xfed44fff window] [ 0.471581] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.471698] pci_bus 0000:01: resource 1 [mem 0xc1000000-0xc19fffff] [ 0.471865] pci_bus 0000:01: resource 2 [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.472018] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.472134] pci_bus 0000:02: resource 1 [mem 0xc1a00000-0xc1afffff] [ 0.472253] pci_bus 0000:03: resource 1 [mem 0xc0000000-0xc0ffffff] [ 0.472371] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.472489] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.472609] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.472729] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000e7fff window] [ 0.472849] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xfeafffff window] [ 0.472977] pci_bus 0000:03: resource 9 [mem 0xfed40000-0xfed44fff window] [ 0.473263] xen: registering gsi 22 triggering 0 polarity 1 [ 0.473287] xen: --> pirq=22 -> irq=22 (gsi=22) [ 0.495006] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x7c0 took 21285 usecs [ 0.495228] xen: registering gsi 20 triggering 0 polarity 1 [ 0.495248] xen: --> pirq=20 -> irq=20 (gsi=20) [ 0.517037] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x7c0 took 21341 usecs [ 0.517239] PCI: CLS 64 bytes, default 64 [ 0.517390] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.517457] Unpacking initramfs... [ 0.517509] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.517833] kvm_intel: VMX not supported by CPU 0 [ 0.517963] kvm_amd: CPU 0 isn't AMD or Hygon [ 0.518136] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c955856658, max_idle_ns: 440795256416 ns [ 0.518351] clocksource: Switched to clocksource tsc [ 0.520817] Initialise system trusted keyrings [ 0.521057] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.521348] NFS: Registering the id_resolver key type [ 0.521476] Key type id_resolver registered [ 0.521591] Key type id_legacy registered [ 0.521761] 9p: Installing v9fs 9p2000 file system support [ 0.535316] Key type asymmetric registered [ 0.535446] Asymmetric key parser 'x509' registered [ 0.535595] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.535752] io scheduler mq-deadline registered [ 0.535867] io scheduler kyber registered [ 0.536441] xen: registering gsi 16 triggering 0 polarity 1 [ 0.536474] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.536702] pcieport 0000:00:1c.0: PME: Signaling with IRQ 50 [ 0.537100] xen: registering gsi 16 triggering 0 polarity 1 [ 0.537106] Already setup the GSI :16 [ 0.537473] pcieport 0000:00:1c.4: PME: Signaling with IRQ 51 [ 0.537898] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.538109] ACPI: button: Sleep Button [SLPB] [ 0.538255] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.538456] ACPI: button: Power Button [PWRF] [ 0.538977] Monitor-Mwait will be used to enter C-1 state [ 0.538992] Monitor-Mwait will be used to enter C-3 state [ 0.539012] ACPI: \_PR_.CPU0: Found 2 idle states [ 0.539377] ACPI: \_PR_.CPU1: Found 2 idle states [ 0.539768] ACPI: \_PR_.CPU2: Found 2 idle states [ 0.540252] ACPI: \_PR_.CPU3: Found 2 idle states [ 0.540933] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.541069] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.541385] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.541505] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.541971] xen:xen_evtchn: Event-channel device installed [ 0.542196] xen_pciback: backend is vpci [ 0.543023] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.543849] hpet_acpi_add: no address or irqs in _CRS [ 0.544036] Non-volatile memory driver v1.3 [ 0.545736] loop: module loaded [ 0.550543] ahci 0000:00:1f.2: version 3.0 [ 0.550641] xen: registering gsi 21 triggering 0 polarity 1 [ 0.550672] xen: --> pirq=21 -> irq=21 (gsi=21) [ 0.561044] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 3 Gbps, SATA mode [ 0.561227] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 0.562960] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 0.578765] scsi host0: ahci [ 0.579261] scsi host1: ahci [ 0.579709] scsi host2: ahci [ 0.580049] scsi host3: ahci [ 0.580371] scsi host4: ahci [ 0.580729] scsi host5: ahci [ 0.580874] ata1: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40100 irq 53 lpm-pol 0 [ 0.581041] ata2: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40180 irq 53 lpm-pol 0 [ 0.581190] ata3: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40200 irq 53 lpm-pol 0 [ 0.581339] ata4: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40280 irq 53 lpm-pol 0 [ 0.581486] ata5: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40300 irq 53 lpm-pol 0 [ 0.581634] ata6: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40380 irq 53 lpm-pol 0 [ 0.581995] tun: Universal TUN/TAP device driver, 1.6 [ 0.582238] e100: Intel(R) PRO/100 Network Driver [ 0.582354] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.582480] sky2: driver version 1.30 [ 0.582615] xen_netfront: Initialising Xen virtual ethernet driver [ 0.582878] usbcore: registered new interface driver usblp [ 0.583021] usbcore: registered new interface driver usb-storage [ 0.583059] xen: registering gsi 22 triggering 0 polarity 1 [ 0.583167] Already setup the GSI :22 [ 0.583173] i8042: PNP: No PS/2 controller found. [ 0.583259] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.583462] rtc_cmos 00:01: RTC can wake from S4 [ 0.583623] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.583695] xen: registering gsi 20 triggering 0 polarity 1 [ 0.583794] Already setup the GSI :20 [ 0.583827] ehci-pci 0000:00:1a.0: debug port 2 [ 0.584251] rtc_cmos 00:01: registered as rtc0 [ 0.584433] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram [ 0.584595] device-mapper: uevent: version 1.0.3 [ 0.584775] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.584947] intel_pstate: CPU model not supported [ 0.585099] hid: raw HID events driver (C) Jiri Kosina [ 0.585331] usbcore: registered new interface driver usbhid [ 0.585462] usbhid: USB HID core driver [ 0.585860] Initializing XFRM netlink socket [ 0.586017] NET: Registered PF_INET6 protocol family [ 0.588125] ehci-pci 0000:00:1a.0: irq 22, io mem 0xc1b60000 [ 0.588160] xen: registering gsi 22 triggering 0 polarity 1 [ 0.588253] Already setup the GSI :22 [ 0.588417] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.589939] Segment Routing with IPv6 [ 0.590077] In-situ OAM (IOAM) with IPv6 [ 0.590255] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.590269] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.590621] NET: Registered PF_PACKET protocol family [ 0.590762] 9pnet: Installing 9P2000 support [ 0.590892] Key type dns_resolver registered [ 0.591440] IPI shorthand broadcast: enabled [ 0.593765] sched_clock: Marking stable (565006155, 27997042)->(598502110, -5498913) [ 0.594329] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.594759] registered taskstats version 1 [ 0.594874] Loading compiled-in X.509 certificates [ 0.596023] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.596156] PM: Magic number: 12:533:642 [ 0.596290] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.596340] printk: legacy console [netcon0] enabled [ 0.596438] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.596445] netconsole: network logging started [ 0.596455] usb usb1: Product: EHCI Host Controller [ 0.596673] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.596709] usb usb1: Manufacturer: Linux 6.10.0-rc5+ ehci_hcd [ 0.597200] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.597473] hub 1-0:1.0: USB hub found [ 0.597616] hub 1-0:1.0: 2 ports detected [ 0.597974] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.598183] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.598365] ehci-pci 0000:00:1d.0: debug port 2 [ 0.602536] ehci-pci 0000:00:1d.0: irq 20, io mem 0xc1b50000 [ 0.609023] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.609296] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.609451] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.609651] usb usb2: Product: EHCI Host Controller [ 0.609771] usb usb2: Manufacturer: Linux 6.10.0-rc5+ ehci_hcd [ 0.609897] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.610313] hub 2-0:1.0: USB hub found [ 0.610455] hub 2-0:1.0: 2 ports detected [ 0.610724] Freeing initrd memory: 20852K [ 0.622540] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.622856] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.623031] ALSA device list: [ 0.623142] No soundcards found. [ 0.623758] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.836057] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.852053] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.888527] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.888671] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.888812] ata6: SATA link down (SStatus 0 SControl 300) [ 0.888953] ata5: SATA link down (SStatus 0 SControl 300) [ 0.889112] ata4: SATA link down (SStatus 0 SControl 300) [ 0.890592] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 0.891225] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.892341] ata3.00: ATAPI: Slimtype DVD A DS8ABSH, AP52, max UDMA/100 [ 0.893374] ata1.00: configured for UDMA/133 [ 0.893664] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 0.894466] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.894473] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.894752] sd 0:0:0:0: [sda] Write Protect is off [ 0.894868] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.894931] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.895212] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 0.896440] ata2: SATA link down (SStatus 0 SControl 300) [ 0.898779] ata3.00: configured for UDMA/100 [ 0.907057] scsi 2:0:0:0: CD-ROM Slimtype DVD A DS8ABSH AP52 PQ: 0 ANSI: 5 [ 0.935772] sda: sda1 sda2 < sda5 > [ 0.936135] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.947410] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.947566] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.963442] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 0.963525] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 0.965437] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.965473] Freeing unused kernel image (initmem) memory: 2680K [ 0.965589] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.965612] Write protecting the kernel read-only data: 24576k [ 0.965969] hub 1-1:1.0: USB hub found [ 0.966315] hub 1-1:1.0: 6 ports detected [ 0.980458] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.980606] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.980989] hub 2-1:1.0: USB hub found [ 0.981210] hub 2-1:1.0: 6 ports detected [ 0.988328] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 1.155631] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.155759] Run /init as init process [ 1.155871] with arguments: [ 1.155872] /init [ 1.155873] placeholder [ 1.155874] with environment: [ 1.155875] HOME=/ [ 1.155875] TERM=linux [ 1.504635] e1000e: Intel(R) PRO/1000 Network Driver [ 1.504769] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.505874] xen: registering gsi 19 triggering 0 polarity 1 [ 1.505904] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.506175] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.614738] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 1.712312] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:67:96:a5:3d [ 1.712468] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.712635] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 0050FF-0FF [ 1.712876] xen: registering gsi 16 triggering 0 polarity 1 [ 1.712884] Already setup the GSI :16 [ 1.713341] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.757010] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 1.803510] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:1e:67:96:a5:3c [ 1.803695] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 1.803901] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 1000FF-0FF [ 1.805954] e1000e 0000:00:19.0 enx001e6796a53d: renamed from eth0 [ 1.806715] e1000e 0000:02:00.0 enx001e6796a53c: renamed from eth1 [ 1.858028] random: crng init done [ 2.472944] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 2.478021] EXT4-fs (dm-0): mounted filesystem db989059-a0db-4120-92d5-1346d3d675c7 ro with ordered data mode. Quota mode: none. [ 5.908962] EXT4-fs (dm-0): re-mounted db989059-a0db-4120-92d5-1346d3d675c7 r/w. Quota mode: none. [ 7.604552] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 7.618300] EXT4-fs (sda1): mounted filesystem c267a582-cd46-4e15-9433-e53a12e29419 r/w with ordered data mode. Quota mode: none. [ 7.701812] Adding 1949692k swap on /dev/mapper/italia1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 9.466343] xenbr0: port 1(enx001e6796a53c) entered blocking state [ 9.466537] xenbr0: port 1(enx001e6796a53c) entered disabled state [ 9.466663] e1000e 0000:02:00.0 enx001e6796a53c: entered allmulticast mode [ 9.466820] e1000e 0000:02:00.0 enx001e6796a53c: entered promiscuous mode [ 11.859431] e1000e 0000:02:00.0 enx001e6796a53c: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 11.860019] xenbr0: port 1(enx001e6796a53c) entered blocking state [ 11.860142] xenbr0: port 1(enx001e6796a53c) entered forwarding state