[ 0.000000] Linux version 6.10.0-rc5+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Sun Jun 30 15:39:15 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/huxelrebe0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009cfff] usable [ 0.000000] Xen: [mem 0x000000000009d800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020062fff] usable [ 0.000000] Xen: [mem 0x00000000ca2b6000-0x00000000ca2bcfff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000ca70a000-0x00000000cab93fff] reserved [ 0.000000] Xen: [mem 0x00000000da6f3000-0x00000000da784fff] reserved [ 0.000000] Xen: [mem 0x00000000da785000-0x00000000da7a8fff] ACPI data [ 0.000000] Xen: [mem 0x00000000da7a9000-0x00000000db4bbfff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000db4bc000-0x00000000dbffefff] reserved [ 0.000000] Xen: [mem 0x00000000dd000000-0x00000000df1fffff] reserved [ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed91fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: LENOVO ThinkServer RS140/ThinkServer RS140, BIOS FBKT75CUS 03/24/2014 [ 0.000000] DMI: Memory slots populated: 2/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000015] Xen PV: Detected 4 vCPUS [ 0.049392] tsc: Fast TSC calibration using PIT [ 0.049393] tsc: Detected 3192.782 MHz processor [ 0.049394] tsc: Detected 3192.608 MHz TSC [ 0.049652] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.049654] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.049660] last_pfn = 0x20063 max_arch_pfn = 0x400000000 [ 0.049662] MTRR map: 4 entries (0 fixed + 4 variable; max 20), built from 10 variable MTRRs [ 0.049663] MTRRs set to read-only [ 0.049665] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.049691] Kernel/User page tables isolation: disabled on XEN PV. [ 0.065337] RAMDISK: [mem 0x04000000-0x0545bfff] [ 0.065342] ACPI: Early table checksum verification disabled [ 0.068039] ACPI: RSDP 0x00000000000F0450 000024 (v02 LENOVO) [ 0.068047] ACPI: XSDT 0x00000000DA78C098 0000B4 (v01 LENOVO TC-FB 000014B0 AMI 00010013) [ 0.068072] ACPI: FACP 0x00000000DA7A3758 00010C (v05 LENOVO TC-FB 000014B0 AMI 00010013) [ 0.068107] ACPI: DSDT 0x00000000DA78C1E0 017573 (v02 LENOVO TC-FB 000014B0 INTL 20120711) [ 0.068117] ACPI: FACS 0x00000000DB4BA080 000040 [ 0.068127] ACPI: APIC 0x00000000DA7A3868 000072 (v03 LENOVO TC-FB 000014B0 AMI 00010013) [ 0.068137] ACPI: FPDT 0x00000000DA7A38E0 000044 (v01 LENOVO TC-FB 000014B0 AMI 00010013) [ 0.068147] ACPI: TCPA 0x00000000DA7A3928 000032 (v02 LENOVO TC-FB 000014B0 MSFT 01000013) [ 0.068157] ACPI: LPIT 0x00000000DA7A3960 00005C (v01 LENOVO TC-FB 000014B0 AMI. 00000005) [ 0.068167] ACPI: SSDT 0x00000000DA7A39C0 000539 (v01 LENOVO TC-FB 000014B0 INTL 20120711) [ 0.068177] ACPI: SSDT 0x00000000DA7A3F00 000AD8 (v01 LENOVO TC-FB 000014B0 INTL 20120711) [ 0.068187] ACPI: MCFG 0x00000000DA7A49D8 00003C (v01 LENOVO TC-FB 000014B0 MSFT 00000097) [ 0.068197] ACPI: HPET 0x00000000DA7A4A18 000038 (v01 LENOVO TC-FB 000014B0 AMI. 00000005) [ 0.068207] ACPI: SSDT 0x00000000DA7A4A50 00036D (v01 LENOVO TC-FB 000014B0 INTL 20120711) [ 0.068217] ACPI: SSDT 0x00000000DA7A4DC0 0034E1 (v01 LENOVO TC-FB 000014B0 INTL 20091112) [ 0.068227] ACPI: ASF! 0x00000000DA7A82A8 0000A5 (v32 LENOVO TC-FB 000014B0 TFSM 000F4240) [ 0.068237] ACPI: RMAD 0x00000000DA7A8350 0000B8 (v01 LENOVO TC-FB 000014B0 INTL 00000001) [ 0.068247] ACPI: EINJ 0x00000000DA7A8408 000130 (v01 LENOVO TC-FB 000014B0 00000000) [ 0.068257] ACPI: ERST 0x00000000DA7A8538 000230 (v01 LENOVO TC-FB 000014B0 00000000) [ 0.068267] ACPI: HEST 0x00000000DA7A8768 0000A8 (v01 LENOVO TC-FB 000014B0 00000000) [ 0.068277] ACPI: BERT 0x00000000DA7A8810 000030 (v01 LENOVO TC-FB 000014B0 00000000) [ 0.068287] ACPI: BGRT 0x00000000DA7A8840 000038 (v00 LENOVO TC-FB 000014B0 AMI 00010013) [ 0.068293] ACPI: Reserving FACP table memory at [mem 0xda7a3758-0xda7a3863] [ 0.068294] ACPI: Reserving DSDT table memory at [mem 0xda78c1e0-0xda7a3752] [ 0.068294] ACPI: Reserving FACS table memory at [mem 0xdb4ba080-0xdb4ba0bf] [ 0.068295] ACPI: Reserving APIC table memory at [mem 0xda7a3868-0xda7a38d9] [ 0.068296] ACPI: Reserving FPDT table memory at [mem 0xda7a38e0-0xda7a3923] [ 0.068296] ACPI: Reserving TCPA table memory at [mem 0xda7a3928-0xda7a3959] [ 0.068297] ACPI: Reserving LPIT table memory at [mem 0xda7a3960-0xda7a39bb] [ 0.068297] ACPI: Reserving SSDT table memory at [mem 0xda7a39c0-0xda7a3ef8] [ 0.068298] ACPI: Reserving SSDT table memory at [mem 0xda7a3f00-0xda7a49d7] [ 0.068298] ACPI: Reserving MCFG table memory at [mem 0xda7a49d8-0xda7a4a13] [ 0.068299] ACPI: Reserving HPET table memory at [mem 0xda7a4a18-0xda7a4a4f] [ 0.068300] ACPI: Reserving SSDT table memory at [mem 0xda7a4a50-0xda7a4dbc] [ 0.068300] ACPI: Reserving SSDT table memory at [mem 0xda7a4dc0-0xda7a82a0] [ 0.068301] ACPI: Reserving ASF! table memory at [mem 0xda7a82a8-0xda7a834c] [ 0.068301] ACPI: Reserving RMAD table memory at [mem 0xda7a8350-0xda7a8407] [ 0.068302] ACPI: Reserving EINJ table memory at [mem 0xda7a8408-0xda7a8537] [ 0.068302] ACPI: Reserving ERST table memory at [mem 0xda7a8538-0xda7a8767] [ 0.068303] ACPI: Reserving HEST table memory at [mem 0xda7a8768-0xda7a880f] [ 0.068304] ACPI: Reserving BERT table memory at [mem 0xda7a8810-0xda7a883f] [ 0.068304] ACPI: Reserving BGRT table memory at [mem 0xda7a8840-0xda7a8877] [ 0.068368] APIC: Switched APIC routing to: Xen PV [ 0.070851] Zone ranges: [ 0.070851] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.070853] DMA32 [mem 0x0000000001000000-0x0000000020062fff] [ 0.070854] Normal empty [ 0.070855] Movable zone start for each node [ 0.070855] Early memory node ranges [ 0.070856] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.070857] node 0: [mem 0x0000000000100000-0x0000000020062fff] [ 0.070858] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020062fff] [ 0.070862] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.070889] On node 0, zone DMA: 99 pages in unavailable ranges [ 0.071980] On node 0, zone DMA32: 32669 pages in unavailable ranges [ 0.071982] p2m virtual area at (____ptrval____), size is 40000000 [ 0.149510] Remapped 99 page(s) [ 0.149861] Reserving Intel graphics memory at [mem 0xdd200000-0xdf1fffff] [ 0.150201] ACPI: PM-Timer IO Port: 0x1808 [ 0.150237] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.150259] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.150266] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.150269] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.150284] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.150287] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.150299] CPU topo: Max. logical packages: 1 [ 0.150300] CPU topo: Max. logical dies: 1 [ 0.150301] CPU topo: Max. dies per package: 1 [ 0.150305] CPU topo: Max. threads per core: 1 [ 0.150305] CPU topo: Num. cores per package: 4 [ 0.150306] CPU topo: Num. threads per package: 4 [ 0.150306] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.150316] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.150317] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.150318] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff] [ 0.150319] [mem 0x20063000-0xca2b5fff] available for PCI devices [ 0.150323] Booting kernel on Xen [ 0.150323] Xen version: 4.19-unstable (preserve-AD) [ 0.150325] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.154756] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.155065] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u524288 [ 0.155069] pcpu-alloc: s194408 r8192 d30872 u524288 alloc=1*2097152 [ 0.155071] pcpu-alloc: [0] 0 1 2 3 [ 0.155107] xen: PV spinlocks enabled [ 0.155109] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.155111] Kernel command line: placeholder root=/dev/mapper/huxelrebe0--vg-root ro console=hvc0 [ 0.155141] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.155155] random: crng init done [ 0.155210] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.155241] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.155687] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.155690] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.155691] software IO TLB: area num 4. [ 0.196718] Memory: 385784K/524284K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 138248K reserved, 0K cma-reserved) [ 0.196820] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.198611] Dynamic Preempt: voluntary [ 0.198709] rcu: Preemptible hierarchical RCU implementation. [ 0.198710] rcu: RCU event tracing is enabled. [ 0.198710] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.198712] Trampoline variant of Tasks RCU enabled. [ 0.198712] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.198713] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.198726] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.205751] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.205849] xen:events: Using FIFO-based ABI [ 0.205866] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.205871] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.205876] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.205880] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.205885] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.205889] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.205894] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.205898] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.205903] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.205907] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.205912] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.205917] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.205921] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.205927] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.205931] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.205939] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.207524] Console: colour VGA+ 80x25 [ 0.207527] printk: legacy console [tty0] enabled [ 0.215366] printk: legacy console [hvc0] enabled [ 0.216274] ACPI: Core revision 20240322 [ 0.225815] ACPI BIOS Warning (bug): Incorrect checksum in table [BGRT] - 0x92, should be 0x4D (20240322/utcksum-58) [ 0.225948] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.226033] Xen: using vcpuop timer interface [ 0.226037] installing Xen timer for CPU 0 [ 0.226119] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e0502f3f6b, max_idle_ns: 440795217409 ns [ 0.226205] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.21 BogoMIPS (lpj=3192608) [ 0.226397] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.226457] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.226522] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.226660] Spectre V2 : Mitigation: Retpolines [ 0.226715] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.226792] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.226852] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.226912] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.226991] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.227211] MDS: Mitigation: Clear CPU buffers [ 0.227266] MMIO Stale Data: Unknown: No mitigations [ 0.227322] SRBDS: Unknown: Dependent on hypervisor status [ 0.227391] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.227468] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.227527] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.227587] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.227699] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.242567] Freeing SMP alternatives memory: 40K [ 0.242629] pid_max: default: 32768 minimum: 301 [ 0.242696] LSM: initializing lsm=capability,selinux [ 0.242755] SELinux: Initializing. [ 0.242880] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.242957] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.243270] cpu 0 spinlock event irq 25 [ 0.243328] VPMU disabled by hypervisor. [ 0.243673] Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only. [ 0.243756] signal: max sigframe size: 1776 [ 0.243852] rcu: Hierarchical SRCU implementation. [ 0.243909] rcu: Max phase no-delay instances is 400. [ 0.244265] smp: Bringing up secondary CPUs ... [ 0.244463] installing Xen timer for CPU 1 [ 0.244821] installing Xen timer for CPU 2 [ 0.245093] installing Xen timer for CPU 3 [ 0.021263] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0002 [ 0.245245] cpu 1 spinlock event irq 45 [ 0.021263] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0004 [ 0.245381] cpu 2 spinlock event irq 46 [ 0.021263] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0006 [ 0.246231] cpu 3 spinlock event irq 47 [ 0.246410] smp: Brought up 1 node, 4 CPUs [ 0.246577] devtmpfs: initialized [ 0.246577] x86/mm: Memory block size: 128MB [ 0.247291] ACPI: PM: Registering ACPI NVS region [mem 0xca2b6000-0xca2bcfff] (28672 bytes) [ 0.247313] ACPI: PM: Registering ACPI NVS region [mem 0xda7a9000-0xdb4bbfff] (13709312 bytes) [ 0.247506] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.247589] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.247740] PM: RTC time: 16:12:26, date: 2024-06-30 [ 0.247892] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.247977] xen:grant_table: Grant tables using version 1 layout [ 0.248219] Grant table initialized [ 0.248374] audit: initializing netlink subsys (disabled) [ 0.248459] audit: type=2000 audit(1719763947.244:1): state=initialized audit_enabled=0 res=1 [ 0.248459] thermal_sys: Registered thermal governor 'step_wise' [ 0.248459] thermal_sys: Registered thermal governor 'user_space' [ 0.248459] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.248560] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f] [ 0.248642] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved as E820 entry [ 0.270391] PCI: Using configuration type 1 for base access [ 0.270495] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.270495] ACPI: Added _OSI(Module Device) [ 0.270495] ACPI: Added _OSI(Processor Device) [ 0.270495] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.270495] ACPI: Added _OSI(Processor Aggregator Device) [ 0.284234] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.284931] xen: registering gsi 9 triggering 0 polarity 0 [ 0.285529] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.289605] ACPI: Dynamic OEM Table Load: [ 0.289668] ACPI: SSDT 0xFFFF88800399CC00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.290700] ACPI: Dynamic OEM Table Load: [ 0.290759] ACPI: SSDT 0xFFFF888003ADB000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.291423] ACPI: Dynamic OEM Table Load: [ 0.291481] ACPI: SSDT 0xFFFF88800397BE00 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.292666] ACPI: _OSC evaluated successfully for all CPUs [ 0.293165] ACPI: Interpreter enabled [ 0.293223] ACPI: PM: (supports S0 S5) [ 0.293278] ACPI: Using IOAPIC for interrupt routing [ 0.293354] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.293435] PCI: Using E820 reservations for host bridge windows [ 0.293986] ACPI: Enabled 11 GPEs in block 00 to 3F [ 0.304872] ACPI: \_TZ_.FN00: New power resource [ 0.305038] ACPI: \_TZ_.FN01: New power resource [ 0.305134] ACPI: \_TZ_.FN02: New power resource [ 0.305233] ACPI: \_TZ_.FN03: New power resource [ 0.305348] ACPI: \_TZ_.FN04: New power resource [ 0.306190] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.306211] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.306926] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability LTR] [ 0.306988] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.307478] PCI host bridge to bus 0000:00 [ 0.307563] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.307661] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.307721] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.307798] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000e7fff window] [ 0.307874] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window] [ 0.307969] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.308053] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000 conventional PCI endpoint [ 0.308394] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 PCIe Root Port [ 0.308546] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.308773] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.309156] pci 0000:00:01.1: [8086:0c05] type 01 class 0x060400 PCIe Root Port [ 0.309291] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.309356] pci 0000:00:01.1: bridge window [io 0xe000-0xefff] [ 0.309421] pci 0000:00:01.1: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.309640] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.310017] pci 0000:00:01.2: [8086:0c09] type 01 class 0x060400 PCIe Root Port [ 0.310169] pci 0000:00:01.2: PCI bridge to [bus 03] [ 0.310228] pci 0000:00:01.2: bridge window [io 0xd000-0xdfff] [ 0.310362] pci 0000:00:01.2: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.310578] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold [ 0.310957] pci 0000:00:02.0: [8086:041a] type 00 class 0x030000 conventional PCI endpoint [ 0.311091] pci 0000:00:02.0: BAR 0 [mem 0xf7800000-0xf7bfffff 64bit] [ 0.311190] pci 0000:00:02.0: BAR 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.311226] pci 0000:00:02.0: BAR 4 [io 0xf000-0xf03f] [ 0.311337] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.311680] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint [ 0.311807] pci 0000:00:03.0: BAR 0 [mem 0xf7e30000-0xf7e33fff 64bit] [ 0.312275] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 conventional PCI endpoint [ 0.312422] pci 0000:00:14.0: BAR 0 [mem 0xf7e20000-0xf7e2ffff 64bit] [ 0.312722] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.312959] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 conventional PCI endpoint [ 0.313145] pci 0000:00:16.0: BAR 0 [mem 0xf7e3c000-0xf7e3c00f 64bit] [ 0.313445] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.313634] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002 conventional PCI endpoint [ 0.313761] pci 0000:00:16.3: BAR 0 [io 0xf0e0-0xf0e7] [ 0.313844] pci 0000:00:16.3: BAR 1 [mem 0xf7e3a000-0xf7e3afff] [ 0.314326] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000 conventional PCI endpoint [ 0.314491] pci 0000:00:19.0: BAR 0 [mem 0xf7e00000-0xf7e1ffff] [ 0.314576] pci 0000:00:19.0: BAR 1 [mem 0xf7e39000-0xf7e39fff] [ 0.314662] pci 0000:00:19.0: BAR 2 [io 0xf080-0xf09f] [ 0.314945] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.315187] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 conventional PCI endpoint [ 0.315257] pci 0000:00:1a.0: BAR 0 [mem 0xf7e38000-0xf7e383ff] [ 0.315606] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.315887] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 PCIe Root Port [ 0.316090] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.316410] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.316532] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.316591] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.316939] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 PCIe Root Port [ 0.317230] pci 0000:00:1c.3: PCI bridge to [bus 05-06] [ 0.317535] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.317652] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.317712] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.318089] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 conventional PCI endpoint [ 0.318238] pci 0000:00:1d.0: BAR 0 [mem 0xf7e37000-0xf7e373ff] [ 0.318597] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.318811] pci 0000:00:1f.0: [8086:8c56] type 00 class 0x060100 conventional PCI endpoint [ 0.319371] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 conventional PCI endpoint [ 0.319498] pci 0000:00:1f.2: BAR 0 [io 0xf0d0-0xf0d7] [ 0.320147] pci 0000:00:1f.2: BAR 1 [io 0xf0c0-0xf0c3] [ 0.320234] pci 0000:00:1f.2: BAR 2 [io 0xf0b0-0xf0b7] [ 0.320317] pci 0000:00:1f.2: BAR 3 [io 0xf0a0-0xf0a3] [ 0.320401] pci 0000:00:1f.2: BAR 4 [io 0xf060-0xf07f] [ 0.320483] pci 0000:00:1f.2: BAR 5 [mem 0xf7e36000-0xf7e367ff] [ 0.320688] pci 0000:00:1f.2: PME# supported from D3hot [ 0.320871] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 conventional PCI endpoint [ 0.321014] pci 0000:00:1f.3: BAR 0 [mem 0xf7e35000-0xf7e350ff 64bit] [ 0.321156] pci 0000:00:1f.3: BAR 4 [io 0x0580-0x059f] [ 0.321434] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.321643] pci 0000:02:00.0: working around ROM BAR overlap defect [ 0.321703] pci 0000:02:00.0: [8086:1533] type 00 class 0x020000 PCIe Endpoint [ 0.321839] pci 0000:02:00.0: BAR 0 [mem 0xf7d00000-0xf7d7ffff] [ 0.321961] pci 0000:02:00.0: BAR 2 [io 0xe000-0xe01f] [ 0.322055] pci 0000:02:00.0: BAR 3 [mem 0xf7d80000-0xf7d83fff] [ 0.322530] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.322893] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.323102] pci 0000:03:00.0: working around ROM BAR overlap defect [ 0.323180] pci 0000:03:00.0: [8086:1533] type 00 class 0x020000 PCIe Endpoint [ 0.323255] pci 0000:03:00.0: BAR 0 [mem 0xf7c00000-0xf7c7ffff] [ 0.323364] pci 0000:03:00.0: BAR 2 [io 0xd000-0xd01f] [ 0.323447] pci 0000:03:00.0: BAR 3 [mem 0xf7c80000-0xf7c83fff] [ 0.323809] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.324100] pci 0000:00:01.2: PCI bridge to [bus 03] [ 0.324320] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.324591] pci 0000:05:00.0: [1283:8893] type 01 class 0x060401 conventional PCI bridge [ 0.324858] pci 0000:05:00.0: PCI bridge to [bus 06] (subtractive decode) [ 0.325312] pci 0000:05:00.0: supports D1 D2 [ 0.325368] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.325597] pci 0000:00:1c.3: PCI bridge to [bus 05-06] [ 0.325775] pci_bus 0000:06: extended config space not accessible [ 0.326014] pci 0000:05:00.0: PCI bridge to [bus 06] (subtractive decode) [ 0.326286] pci_bus 0000:00: on NUMA node 0 [ 0.326444] xen: registering gsi 13 triggering 1 polarity 0 [ 0.327192] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.327277] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.327386] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.327492] ACPI: PCI: Interrupt link LNKD configured for IRQ 3 [ 0.327599] ACPI: PCI: Interrupt link LNKE configured for IRQ 11 [ 0.327705] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.327763] ACPI: PCI: Interrupt link LNKF disabled [ 0.327888] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.327957] ACPI: PCI: Interrupt link LNKG disabled [ 0.328060] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.328470] xen:balloon: Initialising balloon driver [ 0.328548] iommu: Default domain type: Translated [ 0.328548] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.328548] SCSI subsystem initialized [ 0.328548] libata version 3.00 loaded. [ 0.328548] ACPI: bus type USB registered [ 0.328548] usbcore: registered new interface driver usbfs [ 0.328548] usbcore: registered new interface driver hub [ 0.329213] usbcore: registered new device driver usb [ 0.329280] pps_core: LinuxPPS API ver. 1 registered [ 0.329337] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.329420] PTP clock support registered [ 0.329497] Advanced Linux Sound Architecture Driver Initialized. [ 0.329497] NetLabel: Initializing [ 0.329500] NetLabel: domain hash size = 128 [ 0.329556] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.329625] NetLabel: unlabeled traffic allowed by default [ 0.329728] PCI: Using ACPI for IRQ routing [ 0.337314] PCI: pci_cache_line_size set to 64 bytes [ 0.337522] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff] [ 0.337524] e820: reserve RAM buffer [mem 0x20063000-0x23ffffff] [ 0.337549] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.337549] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.337549] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.337549] vgaarb: loaded [ 0.338394] clocksource: Switched to clocksource tsc-early [ 0.338546] VFS: Disk quotas dquot_6.6.0 [ 0.338634] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.338718] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.338866] pnp: PnP ACPI init [ 0.339090] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.339158] system 00:00: [io 0xffff] has been reserved [ 0.339158] system 00:00: [io 0xffff] has been reserved [ 0.339158] system 00:00: [io 0xffff] has been reserved [ 0.339179] system 00:00: [io 0x1c00-0x1cfe] has been reserved [ 0.339240] system 00:00: [io 0x1d00-0x1dfe] has been reserved [ 0.339301] system 00:00: [io 0x1e00-0x1efe] has been reserved [ 0.339362] system 00:00: [io 0x1f00-0x1ffe] has been reserved [ 0.339423] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.339484] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.339557] xen: registering gsi 8 triggering 1 polarity 0 [ 0.339608] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.339798] system 00:03: [io 0x0a00-0x0a2f] has been reserved [ 0.339862] system 00:03: [io 0x0a30-0x0a3f] has been reserved [ 0.339925] system 00:03: [io 0x0a40-0x0a4f] has been reserved [ 0.340038] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.340343] xen: registering gsi 4 triggering 1 polarity 0 [ 0.340345] Already setup the GSI :4 [ 0.340402] pnp 00:05: [dma 0 disabled] [ 0.341138] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.341212] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.341283] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.341429] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.341490] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.341551] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.341612] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.341674] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.341735] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.341796] system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.341857] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 0.341918] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.342246] pnp: PnP ACPI: found 8 devices [ 0.362128] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.362281] NET: Registered PF_INET protocol family [ 0.362364] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.362577] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.362660] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.362739] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.362821] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.362913] TCP: Hash tables configured (established 4096 bind 4096) [ 0.362985] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.363048] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.363126] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.363307] RPC: Registered named UNIX socket transport module. [ 0.363379] RPC: Registered udp transport module. [ 0.363435] RPC: Registered tcp transport module. [ 0.363491] RPC: Registered tcp-with-tls transport module. [ 0.363624] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.363964] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.364053] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.364116] pci 0000:00:01.1: bridge window [io 0xe000-0xefff] [ 0.364186] pci 0000:00:01.1: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.364273] pci 0000:00:01.2: PCI bridge to [bus 03] [ 0.364335] pci 0000:00:01.2: bridge window [io 0xd000-0xdfff] [ 0.364404] pci 0000:00:01.2: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.364484] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.364579] pci 0000:05:00.0: PCI bridge to [bus 06] [ 0.364681] pci 0000:00:1c.3: PCI bridge to [bus 05-06] [ 0.364775] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.364837] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.364970] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.365032] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000e7fff window] [ 0.365095] pci_bus 0000:00: resource 8 [mem 0xdf200000-0xfeafffff window] [ 0.365157] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.365222] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 0.365284] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.365343] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.365528] xen: registering gsi 16 triggering 0 polarity 1 [ 0.365546] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.365760] xen: registering gsi 17 triggering 0 polarity 1 [ 0.365774] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.382326] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x7c0 took 16213 usecs [ 0.382459] xen: registering gsi 23 triggering 0 polarity 1 [ 0.382472] xen: --> pirq=23 -> irq=23 (gsi=23) [ 0.399324] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x7c0 took 16503 usecs [ 0.399450] PCI: CLS 64 bytes, default 64 [ 0.399600] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.399637] Unpacking initramfs... [ 0.399659] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.399830] kvm_intel: VMX not supported by CPU 2 [ 0.399887] kvm_amd: CPU 2 isn't AMD or Hygon [ 0.399943] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e0502f3f6b, max_idle_ns: 440795217409 ns [ 0.400078] clocksource: Switched to clocksource tsc [ 0.404087] Initialise system trusted keyrings [ 0.404225] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.404420] NFS: Registering the id_resolver key type [ 0.404484] Key type id_resolver registered [ 0.404540] Key type id_legacy registered [ 0.404634] 9p: Installing v9fs 9p2000 file system support [ 0.415701] Key type asymmetric registered [ 0.415768] Asymmetric key parser 'x509' registered [ 0.415842] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.415925] io scheduler mq-deadline registered [ 0.415981] io scheduler kyber registered [ 0.416374] xen: registering gsi 16 triggering 0 polarity 1 [ 0.416381] Already setup the GSI :16 [ 0.416574] pcieport 0000:00:01.0: PME: Signaling with IRQ 50 [ 0.416777] xen: registering gsi 16 triggering 0 polarity 1 [ 0.416780] Already setup the GSI :16 [ 0.416933] pcieport 0000:00:01.1: PME: Signaling with IRQ 51 [ 0.417129] xen: registering gsi 16 triggering 0 polarity 1 [ 0.417132] Already setup the GSI :16 [ 0.417313] pcieport 0000:00:01.2: PME: Signaling with IRQ 52 [ 0.417521] xen: registering gsi 16 triggering 0 polarity 1 [ 0.417524] Already setup the GSI :16 [ 0.417767] pcieport 0000:00:1c.0: PME: Signaling with IRQ 53 [ 0.417997] xen: registering gsi 19 triggering 0 polarity 1 [ 0.418009] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.418139] pcieport 0000:00:1c.3: PME: Signaling with IRQ 54 [ 0.418460] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.419161] ACPI: button: Power Button [PWRB] [ 0.419250] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.419402] ACPI: button: Power Button [PWRF] [ 0.419708] Monitor-Mwait will be used to enter C-1 state [ 0.419735] Monitor-Mwait will be used to enter C-2 state [ 0.419746] ACPI: \_PR_.CPU0: Found 2 idle states [ 0.420016] ACPI: \_PR_.CPU1: Found 2 idle states [ 0.420219] ACPI: \_PR_.CPU2: Found 2 idle states [ 0.420483] ACPI: \_PR_.CPU3: Found 2 idle states [ 0.420904] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.420966] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.421219] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.421299] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.421603] xen:xen_evtchn: Event-channel device installed [ 0.421798] xen_pciback: backend is vpci [ 0.422245] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.422713] xen: registering gsi 19 triggering 0 polarity 1 [ 0.422718] Already setup the GSI :19 [ 0.423012] 0000:00:16.3: ttyS0 at I/O 0xf0e0 (irq = 19, base_baud = 115200) is a 16550A [ 0.423357] hpet_acpi_add: no address or irqs in _CRS [ 0.423467] Non-volatile memory driver v1.3 [ 0.424734] loop: module loaded [ 0.427981] ahci 0000:00:1f.2: version 3.0 [ 0.428099] xen: registering gsi 19 triggering 0 polarity 1 [ 0.428106] Already setup the GSI :19 [ 0.428108] xen: registering gsi 16 triggering 0 polarity 1 [ 0.428178] Already setup the GSI :16 [ 0.428287] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 6 Gbps, SATA mode [ 0.428388] ahci 0000:00:1f.2: 5/5 ports implemented (port mask 0x1f) [ 0.428453] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 0.441945] scsi host0: ahci [ 0.442249] scsi host1: ahci [ 0.442435] scsi host2: ahci [ 0.442681] scsi host3: ahci [ 0.442859] scsi host4: ahci [ 0.442939] ata1: SATA max UDMA/133 abar m2048@0xf7e36000 port 0xf7e36100 irq 56 lpm-pol 0 [ 0.443022] ata2: SATA max UDMA/133 abar m2048@0xf7e36000 port 0xf7e36180 irq 56 lpm-pol 0 [ 0.443103] ata3: SATA max UDMA/133 abar m2048@0xf7e36000 port 0xf7e36200 irq 56 lpm-pol 0 [ 0.443184] ata4: SATA max UDMA/133 abar m2048@0xf7e36000 port 0xf7e36280 irq 56 lpm-pol 0 [ 0.443273] ata5: SATA max UDMA/133 abar m2048@0xf7e36000 port 0xf7e36300 irq 56 lpm-pol 0 [ 0.443527] tun: Universal TUN/TAP device driver, 1.6 [ 0.443654] e100: Intel(R) PRO/100 Network Driver [ 0.443713] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.443778] sky2: driver version 1.30 [ 0.443853] xen_netfront: Initialising Xen virtual ethernet driver [ 0.444194] xen: registering gsi 17 triggering 0 polarity 1 [ 0.444201] Already setup the GSI :17 [ 0.444250] xen: registering gsi 16 triggering 0 polarity 1 [ 0.444257] xen: registering gsi 23 triggering 0 polarity 1 [ 0.444262] Already setup the GSI :23 [ 0.444262] Already setup the GSI :16 [ 0.444341] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.444518] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.444626] ehci-pci 0000:00:1a.0: debug port 2 [ 0.448658] ehci-pci 0000:00:1a.0: irq 17, io mem 0xf7e38000 [ 0.455311] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.455456] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.455545] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.455622] usb usb1: Product: EHCI Host Controller [ 0.455678] usb usb1: Manufacturer: Linux 6.10.0-rc5+ ehci_hcd [ 0.455737] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.455949] hub 1-0:1.0: USB hub found [ 0.456014] hub 1-0:1.0: 3 ports detected [ 0.456245] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.456549] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.457696] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.458087] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.458097] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.458252] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 0.458281] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.458374] ehci-pci 0000:00:1d.0: debug port 2 [ 0.458427] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.458713] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.458854] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.458986] usb usb2: Product: xHCI Host Controller [ 0.459081] usb usb2: Manufacturer: Linux 6.10.0-rc5+ xhci-hcd [ 0.459256] usb usb2: SerialNumber: 0000:00:14.0 [ 0.459482] hub 2-0:1.0: USB hub found [ 0.459598] hub 2-0:1.0: 15 ports detected [ 0.462421] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e37000 [ 0.464137] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.10 [ 0.464220] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.464325] usb usb4: Product: xHCI Host Controller [ 0.464382] usb usb4: Manufacturer: Linux 6.10.0-rc5+ xhci-hcd [ 0.464442] usb usb4: SerialNumber: 0000:00:14.0 [ 0.464617] hub 4-0:1.0: USB hub found [ 0.464764] hub 4-0:1.0: 6 ports detected [ 0.465893] usbcore: registered new interface driver usblp [ 0.465962] usbcore: registered new interface driver usb-storage [ 0.466115] i8042: PNP: No PS/2 controller found. [ 0.466296] rtc_cmos 00:01: RTC can wake from S4 [ 0.466745] rtc_cmos 00:01: registered as rtc0 [ 0.466837] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram [ 0.466929] device-mapper: uevent: version 1.0.3 [ 0.466983] xen: registering gsi 18 triggering 0 polarity 1 [ 0.467007] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.467082] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.467829] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.467915] intel_pstate: CPU model not supported [ 0.468017] hid: raw HID events driver (C) Jiri Kosina [ 0.468156] usbcore: registered new interface driver usbhid [ 0.468215] usbhid: USB HID core driver [ 0.468280] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.468621] xen: registering gsi 16 triggering 0 polarity 1 [ 0.468627] Already setup the GSI :16 [ 0.468694] snd_hda_intel 0000:00:03.0: Haswell/Broadwell HDMI/DP must build in CONFIG_SND_HDA_I915 [ 0.468780] i2c i2c-0: Successfully instantiated SPD at 0x53 [ 0.469047] Initializing XFRM netlink socket [ 0.469140] NET: Registered PF_INET6 protocol family [ 0.469283] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.469451] Segment Routing with IPv6 [ 0.469468] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.469515] In-situ OAM (IOAM) with IPv6 [ 0.469517] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.469542] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.469600] usb usb3: Product: EHCI Host Controller [ 0.469710] NET: Registered PF_PACKET protocol family [ 0.469735] usb usb3: Manufacturer: Linux 6.10.0-rc5+ ehci_hcd [ 0.469761] 9pnet: Installing 9P2000 support [ 0.469800] usb usb3: SerialNumber: 0000:00:1d.0 [ 0.469819] Key type dns_resolver registered [ 0.469969] hub 3-0:1.0: USB hub found [ 0.470280] hub 3-0:1.0: 3 ports detected [ 0.471246] Freeing initrd memory: 20848K [ 0.471505] IPI shorthand broadcast: enabled [ 0.471872] snd_hda_intel 0000:00:03.0: Cannot probe codecs, giving up [ 0.473595] sched_clock: Marking stable (453003259, 20263256)->(486888554, -13622039) [ 0.473965] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.474128] registered taskstats version 1 [ 0.474185] Loading compiled-in X.509 certificates [ 0.475188] PM: Magic number: 12:121:238 [ 0.475313] acpi-fan PNP0C0B:03: hash matches [ 0.475375] acpi PNP0C0B:03: hash matches [ 0.475454] printk: legacy console [netcon0] enabled [ 0.475511] netconsole: network logging started [ 0.475760] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.483632] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.483841] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.483931] ALSA device list: [ 0.483985] No soundcards found. [ 0.484434] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.691310] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.707380] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 0.751182] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.751268] ata2: SATA link down (SStatus 0 SControl 300) [ 0.751389] ata4: SATA link down (SStatus 0 SControl 300) [ 0.751519] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.751619] ata3: SATA link down (SStatus 0 SControl 300) [ 0.752846] ata1.00: ATA-9: ST1000NM0033-9ZM173, LV5B, max UDMA/133 [ 0.753549] ata1.00: NCQ Send/Recv Log not supported [ 0.753607] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.754976] ata1.00: NCQ Send/Recv Log not supported [ 0.755037] ata1.00: configured for UDMA/133 [ 0.755190] scsi 0:0:0:0: Direct-Access ATA ST1000NM0033-9ZM LV5B PQ: 0 ANSI: 5 [ 0.755749] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.755755] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.756007] sd 0:0:0:0: [sda] Write Protect is off [ 0.756065] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.756083] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.756195] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 0.757117] ata5.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out [ 0.757200] ata5.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out [ 0.763004] ata5.00: ATAPI: PLDS DVD-RW DU8A5SH, BL61, max UDMA/100 [ 0.775081] ata5.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out [ 0.775162] ata5.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out [ 0.776016] ata5.00: configured for UDMA/100 [ 0.776233] sda: sda1 sda2 < sda5 > [ 0.776634] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.784404] scsi 4:0:0:0: CD-ROM PLDS DVD-RW DU8A5SH BL61 PQ: 0 ANSI: 5 [ 0.819709] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04 [ 0.819790] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.820060] hub 1-1:1.0: USB hub found [ 0.820282] hub 1-1:1.0: 6 ports detected [ 0.821183] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.821270] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.835763] usb 3-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04 [ 0.835844] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.836166] hub 3-1:1.0: USB hub found [ 0.836340] hub 3-1:1.0: 8 ports detected [ 0.845092] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 0.845228] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 0.846427] Freeing unused kernel image (initmem) memory: 2680K [ 0.846501] Write protecting the kernel read-only data: 24576k [ 0.858567] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 0.921216] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.921285] Run /init as init process [ 0.921338] with arguments: [ 0.921339] /init [ 0.921339] placeholder [ 0.921340] with environment: [ 0.921341] HOME=/ [ 0.921341] TERM=linux [ 1.122699] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.122771] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.122921] xen: registering gsi 17 triggering 0 polarity 1 [ 1.122927] Already setup the GSI :17 [ 1.125235] e1000e: Intel(R) PRO/1000 Network Driver [ 1.125311] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.125445] xen: registering gsi 20 triggering 0 polarity 1 [ 1.125463] xen: --> pirq=20 -> irq=20 (gsi=20) [ 1.125629] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.152775] pps pps0: new PPS source ptp0 [ 1.152918] igb 0000:02:00.0: added PHC on eth0 [ 1.153012] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection [ 1.153083] igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 44:39:c4:6d:20:4d [ 1.153198] igb 0000:02:00.0: eth0: PBA No: 000300-000 [ 1.153257] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 1.153463] xen: registering gsi 18 triggering 0 polarity 1 [ 1.153470] Already setup the GSI :18 [ 1.182043] pps pps1: new PPS source ptp1 [ 1.182174] igb 0000:03:00.0: added PHC on eth1 [ 1.182255] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection [ 1.182357] igb 0000:03:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 44:39:c4:6d:20:4e [ 1.182461] igb 0000:03:00.0: eth1: PBA No: 000300-000 [ 1.182528] igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 1.183837] igb 0000:03:00.0 enx4439c46d204e: renamed from eth1 [ 1.184194] igb 0000:02:00.0 enx4439c46d204d: renamed from eth0 [ 1.198122] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 1.261121] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 44:39:c4:39:a1:26 [ 1.261204] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.261319] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 1.262651] e1000e 0000:00:19.0 enx4439c439a126: renamed from eth0 [ 1.897158] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 1.907622] EXT4-fs (dm-0): mounted filesystem b8df22f5-1852-476e-8e79-a714bb3251be ro with ordered data mode. Quota mode: none. [ 4.315248] EXT4-fs (dm-0): re-mounted b8df22f5-1852-476e-8e79-a714bb3251be r/w. Quota mode: none. [ 5.327850] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 5.337390] EXT4-fs (sda1): mounted filesystem e9b9b070-c0aa-4121-b252-8beedfc35abf r/w with ordered data mode. Quota mode: none. [ 5.396525] Adding 1949692k swap on /dev/mapper/huxelrebe0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 6.839501] xenbr0: port 1(enx4439c46d204e) entered blocking state [ 6.839598] xenbr0: port 1(enx4439c46d204e) entered disabled state [ 6.839727] igb 0000:03:00.0 enx4439c46d204e: entered allmulticast mode [ 6.839821] igb 0000:03:00.0 enx4439c46d204e: entered promiscuous mode [ 9.814811] igb 0000:03:00.0 enx4439c46d204e: igb: enx4439c46d204e NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 9.921560] xenbr0: port 1(enx4439c46d204e) entered blocking state [ 9.921675] xenbr0: port 1(enx4439c46d204e) entered forwarding state