[ 0.000000] Linux version 6.10.0-rc5+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Sun Jun 30 15:39:15 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina1--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] DMI: Memory slots populated: 1/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000030] Xen PV: Detected 8 vCPUS [ 0.000488] tsc: Detected 2199.998 MHz processor [ 0.000921] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000924] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000931] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000934] MTRR map: 2 entries (0 fixed + 2 variable; max 20), built from 10 variable MTRRs [ 0.000935] MTRRs set to read-only [ 0.000939] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000981] Kernel/User page tables isolation: disabled on XEN PV. [ 0.026517] RAMDISK: [mem 0x04000000-0x0545bfff] [ 0.026526] ACPI: Early table checksum verification disabled [ 0.027130] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.027142] ACPI: XSDT 0x00000000799FF0A0 0000BC (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027180] ACPI: FACP 0x0000000079A17AC8 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027228] ACPI: DSDT 0x00000000799FF1F0 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.027245] ACPI: FACS 0x0000000079E59F80 000040 [ 0.027261] ACPI: APIC 0x0000000079A17BD8 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027277] ACPI: FPDT 0x0000000079A17C98 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027293] ACPI: FIDT 0x0000000079A17CE0 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027309] ACPI: SPMI 0x0000000079A17D80 000040 (v05 SUPERM SMCI--MB 00000000 AMI. 00000000) [ 0.027325] ACPI: MCFG 0x0000000079A17DC0 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.027342] ACPI: UEFI 0x0000000079A17E00 000042 (v01 00000000 00000000) [ 0.027358] ACPI: DBG2 0x0000000079A17E48 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.027374] ACPI: HPET 0x0000000079A17EC0 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.027390] ACPI: WDDT 0x0000000079A17EF8 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.027407] ACPI: SSDT 0x0000000079A17F38 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.027423] ACPI: SSDT 0x0000000079A26CC8 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.027439] ACPI: SSDT 0x0000000079A28F50 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.027456] ACPI: PRAD 0x0000000079A28FB8 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.027472] ACPI: RMAD 0x0000000079A290C0 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.027488] ACPI: HEST 0x0000000079A29190 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027504] ACPI: BERT 0x0000000079A29238 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027520] ACPI: ERST 0x0000000079A29268 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027536] ACPI: EINJ 0x0000000079A29498 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027545] ACPI: Reserving FACP table memory at [mem 0x79a17ac8-0x79a17bd3] [ 0.027547] ACPI: Reserving DSDT table memory at [mem 0x799ff1f0-0x79a17ac4] [ 0.027548] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.027549] ACPI: Reserving APIC table memory at [mem 0x79a17bd8-0x79a17c93] [ 0.027550] ACPI: Reserving FPDT table memory at [mem 0x79a17c98-0x79a17cdb] [ 0.027551] ACPI: Reserving FIDT table memory at [mem 0x79a17ce0-0x79a17d7b] [ 0.027552] ACPI: Reserving SPMI table memory at [mem 0x79a17d80-0x79a17dbf] [ 0.027553] ACPI: Reserving MCFG table memory at [mem 0x79a17dc0-0x79a17dfb] [ 0.027553] ACPI: Reserving UEFI table memory at [mem 0x79a17e00-0x79a17e41] [ 0.027554] ACPI: Reserving DBG2 table memory at [mem 0x79a17e48-0x79a17eb9] [ 0.027555] ACPI: Reserving HPET table memory at [mem 0x79a17ec0-0x79a17ef7] [ 0.027556] ACPI: Reserving WDDT table memory at [mem 0x79a17ef8-0x79a17f37] [ 0.027557] ACPI: Reserving SSDT table memory at [mem 0x79a17f38-0x79a26cc2] [ 0.027558] ACPI: Reserving SSDT table memory at [mem 0x79a26cc8-0x79a28f4c] [ 0.027559] ACPI: Reserving SSDT table memory at [mem 0x79a28f50-0x79a28fb3] [ 0.027560] ACPI: Reserving PRAD table memory at [mem 0x79a28fb8-0x79a290b9] [ 0.027561] ACPI: Reserving RMAD table memory at [mem 0x79a290c0-0x79a2918b] [ 0.027562] ACPI: Reserving HEST table memory at [mem 0x79a29190-0x79a29237] [ 0.027562] ACPI: Reserving BERT table memory at [mem 0x79a29238-0x79a29267] [ 0.027563] ACPI: Reserving ERST table memory at [mem 0x79a29268-0x79a29497] [ 0.027564] ACPI: Reserving EINJ table memory at [mem 0x79a29498-0x79a295c7] [ 0.027672] APIC: Switched APIC routing to: Xen PV [ 0.031864] Zone ranges: [ 0.031865] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.031868] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.031870] Normal empty [ 0.031871] Movable zone start for each node [ 0.031872] Early memory node ranges [ 0.031872] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.031874] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.031876] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.031881] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.031919] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.033399] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.033405] p2m virtual area at (____ptrval____), size is 40000000 [ 0.160073] Remapped 102 page(s) [ 0.161503] ACPI: PM-Timer IO Port: 0x408 [ 0.161571] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.161574] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.161575] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.161577] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.161578] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.161580] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.161581] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.161583] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.161612] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.161625] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.161628] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.161654] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.161659] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.161672] CPU topo: Max. logical packages: 1 [ 0.161673] CPU topo: Max. logical dies: 1 [ 0.161673] CPU topo: Max. dies per package: 1 [ 0.161680] CPU topo: Max. threads per core: 2 [ 0.161681] CPU topo: Num. cores per package: 4 [ 0.161682] CPU topo: Num. threads per package: 8 [ 0.161682] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs [ 0.161696] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.161699] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.161700] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.161702] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.161712] Booting kernel on Xen [ 0.161713] Xen version: 4.19-unstable (preserve-AD) [ 0.161716] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.168776] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.169258] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u262144 [ 0.169264] pcpu-alloc: s194408 r8192 d30872 u262144 alloc=1*2097152 [ 0.169267] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.169339] xen: PV spinlocks enabled [ 0.169343] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.169345] Kernel command line: placeholder root=/dev/mapper/debina1--vg-root ro console=hvc0 [ 0.169384] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.169395] random: crng init done [ 0.169467] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.169504] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.170842] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.170845] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.170847] software IO TLB: area num 8. [ 0.234430] Memory: 384876K/524284K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 139156K reserved, 0K cma-reserved) [ 0.234593] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.237247] Dynamic Preempt: voluntary [ 0.237498] rcu: Preemptible hierarchical RCU implementation. [ 0.237499] rcu: RCU event tracing is enabled. [ 0.237500] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.237502] Trampoline variant of Tasks RCU enabled. [ 0.237502] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.237503] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.237538] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.249229] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.249388] xen:events: Using FIFO-based ABI [ 0.249420] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.249429] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.249437] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.249444] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.249452] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.249460] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.249467] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.249475] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.249483] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.249490] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.249498] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.249506] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.249513] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.249521] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.249530] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.249540] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.254912] Console: colour VGA+ 80x25 [ 0.254917] printk: legacy console [tty0] enabled [ 0.274094] printk: legacy console [hvc0] enabled [ 0.275505] ACPI: Core revision 20240322 [ 0.289551] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.289712] Xen: using vcpuop timer interface [ 0.289720] installing Xen timer for CPU 0 [ 0.289879] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.290039] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199998) [ 0.290371] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.290489] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.290617] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.290766] Spectre V2 : Mitigation: Retpolines [ 0.291047] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.291199] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.291319] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.291440] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.291588] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.291707] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.292048] MDS: Mitigation: Clear CPU buffers [ 0.292161] TAA: Mitigation: Clear CPU buffers [ 0.292274] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.292439] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.292584] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.292703] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.292823] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.292949] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.315517] Freeing SMP alternatives memory: 40K [ 0.315649] pid_max: default: 32768 minimum: 301 [ 0.315785] LSM: initializing lsm=capability,selinux [ 0.315906] SELinux: Initializing. [ 0.316047] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.316195] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.317129] cpu 0 spinlock event irq 25 [ 0.317248] VPMU disabled by hypervisor. [ 0.317827] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.317982] signal: max sigframe size: 1776 [ 0.318114] rcu: Hierarchical SRCU implementation. [ 0.318230] rcu: Max phase no-delay instances is 400. [ 0.318876] smp: Bringing up secondary CPUs ... [ 0.319236] installing Xen timer for CPU 1 [ 0.319695] installing Xen timer for CPU 2 [ 0.320163] installing Xen timer for CPU 3 [ 0.041494] [Firmware Bug]: CPU 1: APIC ID mismatch. Firmware: 0x0002 APIC: 0x0001 [ 0.320388] cpu 1 spinlock event irq 45 [ 0.321185] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.321358] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.322046] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.041494] [Firmware Bug]: CPU 2: APIC ID mismatch. Firmware: 0x0004 APIC: 0x0002 [ 0.322252] cpu 2 spinlock event irq 46 [ 0.041494] [Firmware Bug]: CPU 3: APIC ID mismatch. Firmware: 0x0006 APIC: 0x0003 [ 0.323081] cpu 3 spinlock event irq 47 [ 0.323347] installing Xen timer for CPU 4 [ 0.324094] installing Xen timer for CPU 5 [ 0.324548] installing Xen timer for CPU 6 [ 0.324967] installing Xen timer for CPU 7 [ 0.041494] [Firmware Bug]: CPU 4: APIC ID mismatch. Firmware: 0x0001 APIC: 0x0004 [ 0.325148] cpu 4 spinlock event irq 68 [ 0.041494] [Firmware Bug]: CPU 5: APIC ID mismatch. Firmware: 0x0003 APIC: 0x0005 [ 0.325346] cpu 5 spinlock event irq 69 [ 0.041494] [Firmware Bug]: CPU 6: APIC ID mismatch. Firmware: 0x0005 APIC: 0x0006 [ 0.326089] cpu 6 spinlock event irq 70 [ 0.327081] cpu 7 spinlock event irq 71 [ 0.327245] smp: Brought up 1 node, 8 CPUs [ 0.327479] devtmpfs: initialized [ 0.328062] x86/mm: Memory block size: 128MB [ 0.328601] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.328601] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.329079] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.329333] PM: RTC time: 16:31:56, date: 2024-06-30 [ 0.329579] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.329733] xen:grant_table: Grant tables using version 1 layout [ 0.329876] Grant table initialized [ 0.330229] audit: initializing netlink subsys (disabled) [ 0.330364] audit: type=2000 audit(1719765116.877:1): state=initialized audit_enabled=0 res=1 [ 0.330364] thermal_sys: Registered thermal governor 'step_wise' [ 0.330364] thermal_sys: Registered thermal governor 'user_space' [ 0.330364] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.331392] PCI: ECAM [mem 0x80000000-0x8fffffff] (base 0x80000000) for domain 0000 [bus 00-ff] [ 0.465746] PCI: Using configuration type 1 for base access [ 0.465931] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.466124] ACPI: Added _OSI(Module Device) [ 0.466124] ACPI: Added _OSI(Processor Device) [ 0.466161] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.466275] ACPI: Added _OSI(Processor Aggregator Device) [ 0.495829] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.497941] xen: registering gsi 9 triggering 0 polarity 0 [ 0.502334] ACPI: Dynamic OEM Table Load: [ 0.510159] ACPI: _OSC evaluated successfully for all CPUs [ 0.510484] ACPI: Interpreter enabled [ 0.510610] ACPI: PM: (supports S0 S4 S5) [ 0.510722] ACPI: Using IOAPIC for interrupt routing [ 0.510869] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.511020] PCI: Using E820 reservations for host bridge windows [ 0.511538] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.542414] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.542544] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.542778] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.543037] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.543202] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.543381] PCI host bridge to bus 0000:ff [ 0.543494] pci_bus 0000:ff: root bus resource [bus ff] [ 0.543692] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 conventional PCI endpoint [ 0.544189] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 conventional PCI endpoint [ 0.544699] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 conventional PCI endpoint [ 0.545169] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 conventional PCI endpoint [ 0.545653] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 conventional PCI endpoint [ 0.546161] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 conventional PCI endpoint [ 0.546626] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 conventional PCI endpoint [ 0.547102] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 conventional PCI endpoint [ 0.547634] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 conventional PCI endpoint [ 0.548115] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 conventional PCI endpoint [ 0.548581] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 conventional PCI endpoint [ 0.549090] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 conventional PCI endpoint [ 0.549560] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 conventional PCI endpoint [ 0.550067] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 conventional PCI endpoint [ 0.550548] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 conventional PCI endpoint [ 0.551013] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 conventional PCI endpoint [ 0.551400] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 conventional PCI endpoint [ 0.551871] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 conventional PCI endpoint [ 0.552167] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 conventional PCI endpoint [ 0.552710] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 conventional PCI endpoint [ 0.553226] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 conventional PCI endpoint [ 0.553741] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 conventional PCI endpoint [ 0.554291] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 conventional PCI endpoint [ 0.554803] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 conventional PCI endpoint [ 0.555318] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 conventional PCI endpoint [ 0.555860] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 conventional PCI endpoint [ 0.556331] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 conventional PCI endpoint [ 0.556851] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 conventional PCI endpoint [ 0.557364] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 conventional PCI endpoint [ 0.557876] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 conventional PCI endpoint [ 0.558430] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 conventional PCI endpoint [ 0.558931] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 conventional PCI endpoint [ 0.559364] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 conventional PCI endpoint [ 0.559870] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 conventional PCI endpoint [ 0.560340] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 conventional PCI endpoint [ 0.560816] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 conventional PCI endpoint [ 0.562446] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 conventional PCI endpoint [ 0.562958] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 conventional PCI endpoint [ 0.563407] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 conventional PCI endpoint [ 0.564008] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 conventional PCI endpoint [ 0.564363] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 conventional PCI endpoint [ 0.564869] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 conventional PCI endpoint [ 0.565344] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 conventional PCI endpoint [ 0.565630] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 conventional PCI endpoint [ 0.566115] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 conventional PCI endpoint [ 0.566627] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 conventional PCI endpoint [ 0.567101] pci_bus 0000:ff: on NUMA node 0 [ 0.571494] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.571622] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.571934] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.572259] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.572380] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.572861] PCI host bridge to bus 0000:00 [ 0.572976] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.573043] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.573164] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.573309] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.573454] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.573641] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 PCIe Root Port [ 0.574384] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 PCIe Root Port [ 0.574689] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.575116] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.575503] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 PCIe Root Port [ 0.575847] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.576278] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.576686] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 PCIe Root Port [ 0.576991] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.577066] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.577469] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.577850] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 PCIe Root Port [ 0.578157] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.578296] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.578502] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.578883] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.579278] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 PCIe Root Port [ 0.579584] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.580053] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.580436] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 PCIe Root Port [ 0.580741] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.581207] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.581595] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint [ 0.581595] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint [ 0.581942] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint [ 0.582037] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 conventional PCI endpoint [ 0.582037] pci 0000:00:14.0: BAR 0 [mem 0xfb600000-0xfb60ffff 64bit] [ 0.583394] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.583752] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 conventional PCI endpoint [ 0.584001] pci 0000:00:16.0: BAR 0 [mem 0xfb617000-0xfb61700f 64bit] [ 0.584435] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.584748] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 conventional PCI endpoint [ 0.585003] pci 0000:00:16.1: BAR 0 [mem 0xfb616000-0xfb61600f 64bit] [ 0.586435] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.586807] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 conventional PCI endpoint [ 0.587035] pci 0000:00:1a.0: BAR 0 [mem 0xfb614000-0xfb6143ff] [ 0.587580] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.587953] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 PCIe Root Port [ 0.588209] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.588340] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.588469] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.588895] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.589137] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.589261] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.589566] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 PCIe Root Port [ 0.589879] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.590010] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.590053] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.590528] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.590727] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.590850] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.591161] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 PCIe Root Port [ 0.591474] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.591605] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.591774] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.592211] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.592409] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.592532] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.592833] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 PCIe Root Port [ 0.592833] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.592833] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.592833] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.592879] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.593037] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.593037] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.593037] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 conventional PCI endpoint [ 0.593037] pci 0000:00:1d.0: BAR 0 [mem 0xfb613000-0xfb6133ff] [ 0.594353] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.594691] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 conventional PCI endpoint [ 0.595539] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 conventional PCI endpoint [ 0.595765] pci 0000:00:1f.2: BAR 0 [io 0xf070-0xf077] [ 0.595923] pci 0000:00:1f.2: BAR 1 [io 0xf060-0xf063] [ 0.596085] pci 0000:00:1f.2: BAR 2 [io 0xf050-0xf057] [ 0.596282] pci 0000:00:1f.2: BAR 3 [io 0xf040-0xf043] [ 0.596440] pci 0000:00:1f.2: BAR 4 [io 0xf020-0xf03f] [ 0.596598] pci 0000:00:1f.2: BAR 5 [mem 0xfb612000-0xfb6127ff] [ 0.596917] pci 0000:00:1f.2: PME# supported from D3hot [ 0.597205] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 conventional PCI endpoint [ 0.597454] pci 0000:00:1f.3: BAR 0 [mem 0xfb611000-0xfb6110ff 64bit] [ 0.597742] pci 0000:00:1f.3: BAR 4 [io 0xf000-0xf01f] [ 0.598137] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 conventional PCI endpoint [ 0.598388] pci 0000:00:1f.6: BAR 0 [mem 0xfb610000-0xfb610fff 64bit] [ 0.599165] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.599474] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.599827] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 PCIe Endpoint [ 0.600072] pci 0000:03:00.0: BAR 0 [mem 0xfb506000-0xfb507fff 64bit] [ 0.600896] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 PCIe Endpoint [ 0.601138] pci 0000:03:00.1: BAR 0 [mem 0xfb504000-0xfb505fff 64bit] [ 0.601916] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 PCIe Endpoint [ 0.602138] pci 0000:03:00.2: BAR 0 [mem 0xfb502000-0xfb503fff 64bit] [ 0.602875] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 PCIe Endpoint [ 0.603154] pci 0000:03:00.3: BAR 0 [mem 0xfb500000-0xfb501fff 64bit] [ 0.603876] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.604250] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 PCIe Endpoint [ 0.604534] pci 0000:04:00.0: BAR 0 [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.604800] pci 0000:04:00.0: BAR 4 [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.604963] pci 0000:04:00.0: ROM [mem 0xfb480000-0xfb4fffff pref] [ 0.605282] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.605508] pci 0000:04:00.0: VF BAR 0 [mem 0x00000000-0x00003fff 64bit] [ 0.605629] pci 0000:04:00.0: VF BAR 0 [mem 0x00000000-0x000fffff 64bit]: contains BAR 0 for 64 VFs [ 0.605871] pci 0000:04:00.0: VF BAR 3 [mem 0x00000000-0x00003fff 64bit] [ 0.605992] pci 0000:04:00.0: VF BAR 3 [mem 0x00000000-0x000fffff 64bit]: contains BAR 3 for 64 VFs [ 0.606491] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 PCIe Endpoint [ 0.606734] pci 0000:04:00.1: BAR 0 [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.607000] pci 0000:04:00.1: BAR 4 [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.607084] pci 0000:04:00.1: ROM [mem 0xfb400000-0xfb47ffff pref] [ 0.607441] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.607647] pci 0000:04:00.1: VF BAR 0 [mem 0x00000000-0x00003fff 64bit] [ 0.607768] pci 0000:04:00.1: VF BAR 0 [mem 0x00000000-0x000fffff 64bit]: contains BAR 0 for 64 VFs [ 0.607970] pci 0000:04:00.1: VF BAR 3 [mem 0x00000000-0x00003fff 64bit] [ 0.608042] pci 0000:04:00.1: VF BAR 3 [mem 0x00000000-0x000fffff 64bit]: contains BAR 3 for 64 VFs [ 0.610507] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.610818] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.611127] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.611511] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.611632] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 PCIe Endpoint [ 0.611905] pci 0000:07:00.0: BAR 0 [mem 0xfb300000-0xfb37ffff] [ 0.611905] pci 0000:07:00.0: BAR 2 [io 0xe000-0xe01f] [ 0.611905] pci 0000:07:00.0: BAR 3 [mem 0xfb380000-0xfb383fff] [ 0.611905] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.612037] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.612037] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.612037] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 PCIe Endpoint [ 0.613098] pci 0000:08:00.0: BAR 0 [mem 0xfb200000-0xfb27ffff] [ 0.613317] pci 0000:08:00.0: BAR 2 [io 0xd000-0xd01f] [ 0.613483] pci 0000:08:00.0: BAR 3 [mem 0xfb280000-0xfb283fff] [ 0.614072] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.614549] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.614966] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 PCIe to PCI/PCI-X bridge [ 0.615224] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.615368] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.615499] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.615742] pci 0000:09:00.0: enabling Extended Tags [ 0.616091] pci 0000:09:00.0: supports D1 D2 [ 0.616206] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.616614] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.616939] pci_bus 0000:0a: extended config space not accessible [ 0.617099] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 conventional PCI endpoint [ 0.617335] pci 0000:0a:00.0: BAR 0 [mem 0xfa000000-0xfaffffff] [ 0.617504] pci 0000:0a:00.0: BAR 1 [mem 0xfb000000-0xfb01ffff] [ 0.617710] pci 0000:0a:00.0: BAR 2 [io 0xc000-0xc07f] [ 0.618067] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.618361] pci 0000:0a:00.0: supports D1 D2 [ 0.618475] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.618927] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.619380] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.619609] pci 0000:0b:00.0: BAR 0 [mem 0xfb160000-0xfb17ffff] [ 0.619821] pci 0000:0b:00.0: BAR 2 [io 0xb060-0xb07f] [ 0.619983] pci 0000:0b:00.0: BAR 3 [mem 0xfb18c000-0xfb18ffff] [ 0.620495] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.620734] pci 0000:0b:00.0: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.620857] pci 0000:0b:00.0: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.621073] pci 0000:0b:00.0: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.621196] pci 0000:0b:00.0: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.621812] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.622042] pci 0000:0b:00.1: BAR 0 [mem 0xfb140000-0xfb15ffff] [ 0.622254] pci 0000:0b:00.1: BAR 2 [io 0xb040-0xb05f] [ 0.622416] pci 0000:0b:00.1: BAR 3 [mem 0xfb188000-0xfb18bfff] [ 0.622943] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.623155] pci 0000:0b:00.1: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.623278] pci 0000:0b:00.1: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.623500] pci 0000:0b:00.1: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.623623] pci 0000:0b:00.1: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.624131] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.624399] pci 0000:0b:00.2: BAR 0 [mem 0xfb120000-0xfb13ffff] [ 0.624611] pci 0000:0b:00.2: BAR 2 [io 0xb020-0xb03f] [ 0.624774] pci 0000:0b:00.2: BAR 3 [mem 0xfb184000-0xfb187fff] [ 0.625301] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.625534] pci 0000:0b:00.2: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.625696] pci 0000:0b:00.2: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.625913] pci 0000:0b:00.2: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.626036] pci 0000:0b:00.2: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.626563] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.626797] pci 0000:0b:00.3: BAR 0 [mem 0xfb100000-0xfb11ffff] [ 0.627042] pci 0000:0b:00.3: BAR 2 [io 0xb000-0xb01f] [ 0.627205] pci 0000:0b:00.3: BAR 3 [mem 0xfb180000-0xfb183fff] [ 0.627731] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.627964] pci 0000:0b:00.3: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.628042] pci 0000:0b:00.3: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.628259] pci 0000:0b:00.3: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.628420] pci 0000:0b:00.3: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.629013] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.629083] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.629676] pci_bus 0000:00: on NUMA node 0 [ 0.629775] xen: registering gsi 13 triggering 1 polarity 0 [ 0.630752] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.630947] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.631115] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.631304] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.631493] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.631611] ACPI: PCI: Interrupt link LNKE disabled [ 0.631795] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.631914] ACPI: PCI: Interrupt link LNKF disabled [ 0.632102] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.632221] ACPI: PCI: Interrupt link LNKG disabled [ 0.632443] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.632561] ACPI: PCI: Interrupt link LNKH disabled [ 0.632845] xen:balloon: Initialising balloon driver [ 0.633142] iommu: Default domain type: Translated [ 0.633260] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.633448] SCSI subsystem initialized [ 0.634071] libata version 3.00 loaded. [ 0.634085] ACPI: bus type USB registered [ 0.634210] usbcore: registered new interface driver usbfs [ 0.634332] usbcore: registered new interface driver hub [ 0.634332] usbcore: registered new device driver usb [ 0.634332] pps_core: LinuxPPS API ver. 1 registered [ 0.634332] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.634445] PTP clock support registered [ 0.635085] Advanced Linux Sound Architecture Driver Initialized. [ 0.635180] NetLabel: Initializing [ 0.635293] NetLabel: domain hash size = 128 [ 0.635406] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.635539] NetLabel: unlabeled traffic allowed by default [ 0.636083] PCI: Using ACPI for IRQ routing [ 0.673281] PCI: pci_cache_line_size set to 64 bytes [ 0.674124] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.674127] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.674150] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.674208] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.674326] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.674475] vgaarb: loaded [ 0.675127] clocksource: Switched to clocksource tsc-early [ 0.675541] VFS: Disk quotas dquot_6.6.0 [ 0.675660] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.675813] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.675970] pnp: PnP ACPI init [ 0.676427] xen: registering gsi 8 triggering 1 polarity 0 [ 0.676629] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.676795] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.676914] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.677032] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.677175] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.677296] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.677415] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.677536] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.677657] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.677777] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.677897] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.678017] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.678202] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.678607] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.678729] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.678847] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.678966] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.679110] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.679567] xen: registering gsi 4 triggering 1 polarity 0 [ 0.679572] Already setup the GSI :4 [ 0.679684] pnp 00:03: [dma 0 disabled] [ 0.679991] xen: registering gsi 3 triggering 1 polarity 0 [ 0.680002] pnp 00:04: [dma 0 disabled] [ 0.680576] pnp: PnP ACPI: found 5 devices [ 0.713161] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.713314] NET: Registered PF_INET protocol family [ 0.713473] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.713830] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.713982] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.714218] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.714396] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.714567] TCP: Hash tables configured (established 4096 bind 4096) [ 0.714710] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.714833] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.714985] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.715388] RPC: Registered named UNIX socket transport module. [ 0.715522] RPC: Registered udp transport module. [ 0.715637] RPC: Registered tcp transport module. [ 0.715751] RPC: Registered tcp-with-tls transport module. [ 0.715866] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.716472] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.716649] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref]: assigned [ 0.716799] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.716981] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.717178] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.717313] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.718583] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.718733] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.718878] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.719024] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.719195] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.719344] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.719489] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.719635] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.719787] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.719933] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.720098] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.720257] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.720403] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.720549] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.720695] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.720841] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.720987] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.721142] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.721278] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.721450] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.721625] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.721800] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.721921] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.722069] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.722247] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.722369] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.722516] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.722679] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.722799] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.722941] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.723137] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.723264] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.723408] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.723589] pci 0000:0b:00.0: VF BAR 0 [mem 0x90000000-0x9001ffff 64bit pref]: assigned [ 0.723747] pci 0000:0b:00.0: VF BAR 3 [mem 0x90020000-0x9003ffff 64bit pref]: assigned [ 0.723907] pci 0000:0b:00.1: VF BAR 0 [mem 0x90040000-0x9005ffff 64bit pref]: assigned [ 0.724076] pci 0000:0b:00.1: VF BAR 3 [mem 0x90060000-0x9007ffff 64bit pref]: assigned [ 0.724233] pci 0000:0b:00.2: VF BAR 0 [mem 0x90080000-0x9009ffff 64bit pref]: assigned [ 0.724387] pci 0000:0b:00.2: VF BAR 3 [mem 0x900a0000-0x900bffff 64bit pref]: assigned [ 0.724540] pci 0000:0b:00.3: VF BAR 0 [mem 0x900c0000-0x900dffff 64bit pref]: assigned [ 0.724693] pci 0000:0b:00.3: VF BAR 3 [mem 0x900e0000-0x900fffff 64bit pref]: assigned [ 0.724848] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.724968] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.725132] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.725277] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.725451] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.725601] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.725720] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.725840] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.725960] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.726102] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.726234] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.726353] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.726498] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.726620] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.726748] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.726864] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.726983] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.727121] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.727247] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.727363] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.727482] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.727598] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.727717] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.728296] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.728509] xen: registering gsi 19 triggering 0 polarity 1 [ 0.728542] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.737405] xen: registering gsi 18 triggering 0 polarity 1 [ 0.737429] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.753346] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x7c0 took 15615 usecs [ 0.753615] xen: registering gsi 18 triggering 0 polarity 1 [ 0.753621] Already setup the GSI :18 [ 0.770474] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x7c0 took 16514 usecs [ 0.770695] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.770879] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.770967] Unpacking initramfs... [ 0.771002] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.771356] kvm_intel: VMX not supported by CPU 4 [ 0.771473] kvm_amd: CPU 4 isn't AMD or Hygon [ 0.771589] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.771825] clocksource: Switched to clocksource tsc [ 0.778216] Initialise system trusted keyrings [ 0.778564] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.778954] NFS: Registering the id_resolver key type [ 0.779086] Key type id_resolver registered [ 0.779207] Key type id_legacy registered [ 0.779415] 9p: Installing v9fs 9p2000 file system support [ 0.797144] Key type asymmetric registered [ 0.797273] Asymmetric key parser 'x509' registered [ 0.797413] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.797579] io scheduler mq-deadline registered [ 0.797693] io scheduler kyber registered [ 0.798321] xen: registering gsi 16 triggering 0 polarity 1 [ 0.798357] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.798788] xen: registering gsi 16 triggering 0 polarity 1 [ 0.798795] Already setup the GSI :16 [ 0.799272] xen: registering gsi 16 triggering 0 polarity 1 [ 0.799278] Already setup the GSI :16 [ 0.799623] xen: registering gsi 16 triggering 0 polarity 1 [ 0.799628] Already setup the GSI :16 [ 0.799951] xen: registering gsi 16 triggering 0 polarity 1 [ 0.799955] Already setup the GSI :16 [ 0.800439] xen: registering gsi 16 triggering 0 polarity 1 [ 0.800444] Already setup the GSI :16 [ 0.800930] xen: registering gsi 16 triggering 0 polarity 1 [ 0.800936] Already setup the GSI :16 [ 0.801392] xen: registering gsi 17 triggering 0 polarity 1 [ 0.801412] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.801770] xen: registering gsi 19 triggering 0 polarity 1 [ 0.801775] Already setup the GSI :19 [ 0.802222] xen: registering gsi 16 triggering 0 polarity 1 [ 0.802227] Already setup the GSI :16 [ 0.802893] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.803072] ACPI: button: Power Button [PWRB] [ 0.803217] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.803476] ACPI: button: Power Button [PWRF] [ 0.803753] Monitor-Mwait will be used to enter C-1 state [ 0.803789] Monitor-Mwait will be used to enter C-2 state [ 0.803804] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.804320] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.804805] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.805171] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.805468] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.805967] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.806426] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.806892] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.807677] xen:xen_evtchn: Event-channel device installed [ 0.807921] xen_pciback: backend is vpci [ 0.808755] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.809121] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.809983] hpet_acpi_add: no address or irqs in _CRS [ 0.810226] Non-volatile memory driver v1.3 [ 0.814000] loop: module loaded [ 0.820288] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 0.820351] ahci 0000:00:1f.2: version 3.0 [ 0.820544] xen: registering gsi 16 triggering 0 polarity 1 [ 0.820556] Already setup the GSI :16 [ 0.820908] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 6 Gbps, SATA mode [ 0.821059] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 0.821179] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.837199] scsi host0: ahci [ 0.837574] scsi host1: ahci [ 0.837969] scsi host2: ahci [ 0.838274] scsi host3: ahci [ 0.838577] scsi host4: ahci [ 0.838894] scsi host5: ahci [ 0.839043] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 83 lpm-pol 0 [ 0.839192] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 83 lpm-pol 0 [ 0.839339] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 83 lpm-pol 0 [ 0.839485] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 83 lpm-pol 0 [ 0.839653] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 83 lpm-pol 0 [ 0.839800] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 83 lpm-pol 0 [ 0.840276] tun: Universal TUN/TAP device driver, 1.6 [ 0.840596] e100: Intel(R) PRO/100 Network Driver [ 0.840720] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.840857] sky2: driver version 1.30 [ 0.841042] xen_netfront: Initialising Xen virtual ethernet driver [ 0.842625] xen: registering gsi 19 triggering 0 polarity 1 [ 0.842636] Already setup the GSI :19 [ 0.842722] xen: registering gsi 18 triggering 0 polarity 1 [ 0.842755] Already setup the GSI :18 [ 0.842905] xen: registering gsi 18 triggering 0 polarity 1 [ 0.842916] Already setup the GSI :18 [ 0.843008] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.843284] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.843463] ehci-pci 0000:00:1a.0: debug port 2 [ 0.847596] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.854560] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.854919] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.855077] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.855222] usb usb1: Product: EHCI Host Controller [ 0.855337] usb usb1: Manufacturer: Linux 6.10.0-rc5+ ehci_hcd [ 0.855488] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.855834] hub 1-0:1.0: USB hub found [ 0.855982] hub 1-0:1.0: 2 ports detected [ 0.856350] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.856582] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.857850] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.858388] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.858428] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.858592] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.858724] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 0.858800] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.858844] ehci-pci 0000:00:1d.0: debug port 2 [ 0.859172] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.859176] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.859484] usb usb2: Product: xHCI Host Controller [ 0.859676] usb usb2: Manufacturer: Linux 6.10.0-rc5+ xhci-hcd [ 0.859798] usb usb2: SerialNumber: 0000:00:14.0 [ 0.860176] hub 2-0:1.0: USB hub found [ 0.860333] hub 2-0:1.0: 8 ports detected [ 0.861738] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.10 [ 0.861892] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.862039] usb usb3: Product: xHCI Host Controller [ 0.862156] usb usb3: Manufacturer: Linux 6.10.0-rc5+ xhci-hcd [ 0.862324] usb usb3: SerialNumber: 0000:00:14.0 [ 0.862695] hub 3-0:1.0: USB hub found [ 0.862845] hub 3-0:1.0: 6 ports detected [ 0.863145] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.864057] usbcore: registered new interface driver usblp [ 0.864190] usbcore: registered new interface driver usb-storage [ 0.864336] i8042: PNP: No PS/2 controller found. [ 0.864669] rtc_cmos 00:00: RTC can wake from S4 [ 0.865302] rtc_cmos 00:00: registered as rtc0 [ 0.865461] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.865661] device-mapper: uevent: version 1.0.3 [ 0.865764] xen: registering gsi 18 triggering 0 polarity 1 [ 0.865785] Already setup the GSI :18 [ 0.865868] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.865933] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.866056] intel_pstate: CPU model not supported [ 0.866074] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.866187] hid: raw HID events driver (C) Jiri Kosina [ 0.866661] usbcore: registered new interface driver usbhid [ 0.866779] usbhid: USB HID core driver [ 0.867326] Initializing XFRM netlink socket [ 0.867487] NET: Registered PF_INET6 protocol family [ 0.867971] Segment Routing with IPv6 [ 0.868094] In-situ OAM (IOAM) with IPv6 [ 0.868236] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.868486] NET: Registered PF_PACKET protocol family [ 0.868649] 9pnet: Installing 9P2000 support [ 0.868777] Key type dns_resolver registered [ 0.869547] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.869782] IPI shorthand broadcast: enabled [ 0.869919] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.870075] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.870220] usb usb4: Product: EHCI Host Controller [ 0.870334] usb usb4: Manufacturer: Linux 6.10.0-rc5+ ehci_hcd [ 0.870453] usb usb4: SerialNumber: 0000:00:1d.0 [ 0.870840] hub 4-0:1.0: USB hub found [ 0.870989] hub 4-0:1.0: 2 ports detected [ 0.872942] sched_clock: Marking stable (832004870, 40494990)->(1758850300, -886350440) [ 0.873538] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.874046] registered taskstats version 1 [ 0.874161] Loading compiled-in X.509 certificates [ 0.875779] PM: Magic number: 12:430:541 [ 0.876012] printk: legacy console [netcon0] enabled [ 0.876130] netconsole: network logging started [ 0.876601] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.884901] Freeing initrd memory: 20848K [ 0.896861] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.897212] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.897375] ALSA device list: [ 0.897485] No soundcards found. [ 0.898187] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 1.091646] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.099547] usb 2-3: new high-speed USB device number 2 using xhci_hcd [ 1.107649] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 1.152653] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.152886] ata6: SATA link down (SStatus 0 SControl 300) [ 1.153029] ata1: SATA link down (SStatus 0 SControl 300) [ 1.153189] ata5: SATA link down (SStatus 0 SControl 300) [ 1.153342] ata4: SATA link down (SStatus 0 SControl 300) [ 1.153528] ata2: SATA link down (SStatus 0 SControl 300) [ 1.153859] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.220039] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.220213] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.220716] hub 1-1:1.0: USB hub found [ 1.220910] hub 1-1:1.0: 4 ports detected [ 1.227156] usb 2-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.227312] usb 2-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.227437] usb 2-3: Product: USB2.0 Hub [ 1.228348] hub 2-3:1.0: USB hub found [ 1.228848] hub 2-3:1.0: 4 ports detected [ 1.236284] usb 4-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.236442] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.236469] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.236747] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.236826] hub 4-1:1.0: USB hub found [ 1.237035] hub 4-1:1.0: 4 ports detected [ 1.264380] ata3.00: configured for UDMA/133 [ 1.264724] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.265584] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.265588] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.265892] sd 2:0:0:0: [sda] Write Protect is off [ 1.266014] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.266067] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.266313] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.283485] sda: sda1 sda2 < sda5 > [ 1.284023] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.285913] Freeing unused kernel image (initmem) memory: 2680K [ 1.286056] Write protecting the kernel read-only data: 24576k [ 1.306173] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 1.345637] usb 2-4: new high-speed USB device number 3 using xhci_hcd [ 1.471846] usb 2-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.472003] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.472652] hub 2-4:1.0: USB hub found [ 1.472867] hub 2-4:1.0: 4 ports detected [ 1.535545] usb 2-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.612860] usb 2-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.613016] usb 2-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.613162] usb 2-3.2: Product: USB2.0 Hub [ 1.613840] hub 2-3.2:1.0: USB hub found [ 1.614323] hub 2-3.2:1.0: 4 ports detected [ 1.766539] usb 2-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.780890] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.781018] Run /init as init process [ 1.781129] with arguments: [ 1.781130] /init [ 1.781131] placeholder [ 1.781132] with environment: [ 1.781133] HOME=/ [ 1.781134] TERM=linux [ 1.869937] usb 2-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.870102] usb 2-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.877807] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.1/2-4.1:1.0/0003:0557:2419.0001/input/input2 [ 1.930824] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 1.933847] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.1/2-4.1:1.1/0003:0557:2419.0002/input/input3 [ 1.934193] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.221171] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.221353] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.221741] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20240322/nsprepkg-94) [ 2.223144] xen: registering gsi 16 triggering 0 polarity 1 [ 2.223155] Already setup the GSI :16 [ 2.225339] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.225493] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.225715] xen: registering gsi 16 triggering 0 polarity 1 [ 2.225724] Already setup the GSI :16 [ 2.254330] pps pps0: new PPS source ptp0 [ 2.254580] igb 0000:07:00.0: added PHC on eth0 [ 2.254716] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.254837] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:93:a4:c8 [ 2.255003] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.255119] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.255356] xen: registering gsi 17 triggering 0 polarity 1 [ 2.255366] Already setup the GSI :17 [ 2.284286] pps pps1: new PPS source ptp1 [ 2.284531] igb 0000:08:00.0: added PHC on eth1 [ 2.284679] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.284804] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:93:a4:c9 [ 2.284974] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.285117] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.285348] xen: registering gsi 16 triggering 0 polarity 1 [ 2.285356] Already setup the GSI :16 [ 2.343765] igb 0000:0b:00.0: added PHC on eth2 [ 2.343908] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.344029] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:93:a4:ca [ 2.344233] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.344349] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.344645] xen: registering gsi 17 triggering 0 polarity 1 [ 2.344655] Already setup the GSI :17 [ 2.402317] igb 0000:0b:00.1: added PHC on eth3 [ 2.402460] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.402598] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:93:a4:cb [ 2.402804] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.402959] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.403186] xen: registering gsi 18 triggering 0 polarity 1 [ 2.403194] Already setup the GSI :18 [ 2.459726] igb 0000:0b:00.2: added PHC on eth4 [ 2.459870] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.459992] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:93:a4:cc [ 2.460196] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.460311] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.460570] xen: registering gsi 19 triggering 0 polarity 1 [ 2.460580] Already setup the GSI :19 [ 2.518247] igb 0000:0b:00.3: added PHC on eth5 [ 2.518390] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.518531] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:93:a4:cd [ 2.518739] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.518854] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.521787] igb 0000:07:00.0 enx0cc47a93a4c8: renamed from eth0 [ 2.522279] igb 0000:08:00.0 enx0cc47a93a4c9: renamed from eth1 [ 2.523032] igb 0000:0b:00.1 enx0cc47a93a4cb: renamed from eth3 [ 2.523427] igb 0000:0b:00.0 enx0cc47a93a4ca: renamed from eth2 [ 2.524080] igb 0000:0b:00.2 enx0cc47a93a4cc: renamed from eth4 [ 2.528943] igb 0000:0b:00.3 enx0cc47a93a4cd: renamed from eth5 [ 2.963907] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.092782] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.092911] ixgbe 0000:04:00.0: 0c:c4:7a:93:a8:9e [ 3.383606] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.383937] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20240322/nsprepkg-94) [ 3.384155] xen: registering gsi 17 triggering 0 polarity 1 [ 3.384168] Already setup the GSI :17 [ 4.124471] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.254077] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.254242] ixgbe 0000:04:00.1: 0c:c4:7a:93:a8:9f [ 4.543334] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.545670] ixgbe 0000:04:00.1 enx0cc47a93a89f: renamed from eth1 [ 4.546062] ixgbe 0000:04:00.0 enx0cc47a93a89e: renamed from eth0 [ 4.965822] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 4.973483] EXT4-fs (dm-0): mounted filesystem 6e0370fc-afac-4f77-9f47-4bac410726f9 ro with ordered data mode. Quota mode: none. [ 8.502734] EXT4-fs (dm-0): re-mounted 6e0370fc-afac-4f77-9f47-4bac410726f9 r/w. Quota mode: none. [ 9.651488] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.672711] EXT4-fs (sda1): mounted filesystem 4b42adcf-d6d6-4bc0-b125-b7cfa2fa4b5a r/w with ordered data mode. Quota mode: none. [ 9.765062] Adding 1949692k swap on /dev/mapper/debina1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.236636] xenbr0: port 1(enx0cc47a93a4c8) entered blocking state [ 11.236813] xenbr0: port 1(enx0cc47a93a4c8) entered disabled state [ 11.236945] igb 0000:07:00.0 enx0cc47a93a4c8: entered allmulticast mode [ 11.237114] igb 0000:07:00.0 enx0cc47a93a4c8: entered promiscuous mode [ 14.528159] igb 0000:07:00.0 enx0cc47a93a4c8: igb: enx0cc47a93a4c8 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 14.737936] xenbr0: port 1(enx0cc47a93a4c8) entered blocking state [ 14.738101] xenbr0: port 1(enx0cc47a93a4c8) entered forwarding state