[ 0.000000] Linux version 6.10.0-rc5+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Sun Jun 30 21:37:56 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/italia0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009afff] usable [ 0.000000] Xen: [mem 0x000000000009bc00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020064fff] usable [ 0.000000] Xen: [mem 0x00000000ab9ba000-0x00000000bba3afff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000bc60a000-0x00000000bc73ffff] reserved [ 0.000000] Xen: [mem 0x00000000beaee000-0x00000000beaf8fff] reserved [ 0.000000] Xen: [mem 0x00000000beb05000-0x00000000beb15fff] reserved [ 0.000000] Xen: [mem 0x00000000bed3a000-0x00000000beddffff] reserved [ 0.000000] Xen: [mem 0x00000000bede0000-0x00000000befdffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000befe0000-0x00000000beffefff] ACPI data [ 0.000000] Xen: [mem 0x00000000bf000000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed19000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed90fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Intel Corporation SandyBridge Platform/To be filled by O.E.M., BIOS S1200BT.86B.02.00.0042.050820141549 05/08/2014 [ 0.000000] DMI: Memory slots populated: 1/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000022] Xen PV: Detected 4 vCPUS [ 0.000485] tsc: Detected 3092.972 MHz processor [ 0.000900] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000903] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000910] last_pfn = 0x20065 max_arch_pfn = 0x400000000 [ 0.000912] MTRR map: 3 entries (0 fixed + 3 variable; max 20), built from 10 variable MTRRs [ 0.000914] MTRRs set to read-only [ 0.000917] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000954] Kernel/User page tables isolation: disabled on XEN PV. [ 0.024139] RAMDISK: [mem 0x04000000-0x0545cfff] [ 0.024146] ACPI: Early table checksum verification disabled [ 0.033807] ACPI: RSDP 0x00000000000F0410 000024 (v02 INTEL ) [ 0.033817] ACPI: XSDT 0x00000000BEFFDE18 0000BC (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033850] ACPI: FACP 0x00000000BEFFCA98 0000F4 (v04 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033889] ACPI: DSDT 0x00000000BEFEE018 00CE48 (v02 INTEL S1200BTS 00000000 INTL 20100331) [ 0.033904] ACPI: FACS 0x00000000BEFFDD40 000040 [ 0.033920] ACPI: APIC 0x00000000BEFFB018 000652 (v03 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033935] ACPI: SPMI 0x00000000BEFFEC18 000040 (v05 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033951] ACPI: MCFG 0x00000000BEFFEB98 00003C (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033966] ACPI: WDDT 0x00000000BEFFEF18 000040 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033981] ACPI: HPET 0x00000000BEFFEE98 000038 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033997] ACPI: SSDT 0x00000000BEFEB018 0010A8 (v02 INTEL S1200BTS 00001000 INTL 20100331) [ 0.034012] ACPI: BOOT 0x00000000BEFFEE18 000028 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034027] ACPI: SSDT 0x00000000BEFE7698 0005E0 (v02 INTEL S1200BTS 00003000 INTL 20100331) [ 0.034042] ACPI: SSDT 0x00000000BEFE6018 000A92 (v02 INTEL S1200BTS 00003000 INTL 20100331) [ 0.034058] ACPI: SSDT 0x00000000BEFEA598 00054D (v01 INTEL S1200BTS 00001000 INTL 20100331) [ 0.034073] ACPI: SSDT 0x00000000BEFFDB18 000069 (v01 INTEL S1200BTS 00001000 INTL 20100331) [ 0.034088] ACPI: SSDT 0x00000000BEFE9E18 00017B (v02 INTEL S1200BTS 00002000 INTL 20100331) [ 0.034103] ACPI: RMAD 0x00000000BEFE8F18 000078 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034118] ACPI: SPCR 0x00000000BEFFED98 000050 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034134] ACPI: HEST 0x00000000BEFFCF18 0000A8 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034149] ACPI: BERT 0x00000000BEFFED18 000030 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034164] ACPI: ERST 0x00000000BEFE8C98 000230 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034179] ACPI: EINJ 0x00000000BEFFC918 000130 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034187] ACPI: Reserving FACP table memory at [mem 0xbeffca98-0xbeffcb8b] [ 0.034189] ACPI: Reserving DSDT table memory at [mem 0xbefee018-0xbeffae5f] [ 0.034190] ACPI: Reserving FACS table memory at [mem 0xbeffdd40-0xbeffdd7f] [ 0.034191] ACPI: Reserving APIC table memory at [mem 0xbeffb018-0xbeffb669] [ 0.034191] ACPI: Reserving SPMI table memory at [mem 0xbeffec18-0xbeffec57] [ 0.034192] ACPI: Reserving MCFG table memory at [mem 0xbeffeb98-0xbeffebd3] [ 0.034193] ACPI: Reserving WDDT table memory at [mem 0xbeffef18-0xbeffef57] [ 0.034194] ACPI: Reserving HPET table memory at [mem 0xbeffee98-0xbeffeecf] [ 0.034195] ACPI: Reserving SSDT table memory at [mem 0xbefeb018-0xbefec0bf] [ 0.034195] ACPI: Reserving BOOT table memory at [mem 0xbeffee18-0xbeffee3f] [ 0.034196] ACPI: Reserving SSDT table memory at [mem 0xbefe7698-0xbefe7c77] [ 0.034197] ACPI: Reserving SSDT table memory at [mem 0xbefe6018-0xbefe6aa9] [ 0.034198] ACPI: Reserving SSDT table memory at [mem 0xbefea598-0xbefeaae4] [ 0.034198] ACPI: Reserving SSDT table memory at [mem 0xbeffdb18-0xbeffdb80] [ 0.034199] ACPI: Reserving SSDT table memory at [mem 0xbefe9e18-0xbefe9f92] [ 0.034200] ACPI: Reserving RMAD table memory at [mem 0xbefe8f18-0xbefe8f8f] [ 0.034201] ACPI: Reserving SPCR table memory at [mem 0xbeffed98-0xbeffede7] [ 0.034202] ACPI: Reserving HEST table memory at [mem 0xbeffcf18-0xbeffcfbf] [ 0.034202] ACPI: Reserving BERT table memory at [mem 0xbeffed18-0xbeffed47] [ 0.034203] ACPI: Reserving ERST table memory at [mem 0xbefe8c98-0xbefe8ec7] [ 0.034204] ACPI: Reserving EINJ table memory at [mem 0xbeffc918-0xbeffca47] [ 0.034296] APIC: Switched APIC routing to: Xen PV [ 0.038792] Zone ranges: [ 0.038793] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.038795] DMA32 [mem 0x0000000001000000-0x0000000020064fff] [ 0.038797] Normal empty [ 0.038798] Movable zone start for each node [ 0.038798] Early memory node ranges [ 0.038799] node 0: [mem 0x0000000000001000-0x000000000009afff] [ 0.038800] node 0: [mem 0x0000000000100000-0x0000000020064fff] [ 0.038802] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020064fff] [ 0.038806] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.038846] On node 0, zone DMA: 101 pages in unavailable ranges [ 0.040466] On node 0, zone DMA32: 32667 pages in unavailable ranges [ 0.040472] p2m virtual area at (____ptrval____), size is 40000000 [ 0.176529] Remapped 101 page(s) [ 0.177210] ACPI: PM-Timer IO Port: 0x408 [ 0.177369] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.177414] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.177441] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.177444] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.177496] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.177501] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.177510] ACPI: SPCR: SPCR table version 1 [ 0.177513] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.177522] CPU topo: Max. logical packages: 1 [ 0.177523] CPU topo: Max. logical dies: 1 [ 0.177523] CPU topo: Max. dies per package: 1 [ 0.177528] CPU topo: Max. threads per core: 1 [ 0.177529] CPU topo: Num. cores per package: 4 [ 0.177529] CPU topo: Num. threads per package: 4 [ 0.177530] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.177544] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.177546] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009bfff] [ 0.177547] PM: hibernation: Registered nosave memory: [mem 0x0009c000-0x000fffff] [ 0.177549] [mem 0x20065000-0xab9b9fff] available for PCI devices [ 0.177553] Booting kernel on Xen [ 0.177554] Xen version: 4.19-unstable (preserve-AD) [ 0.177557] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.182837] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.183273] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u524288 [ 0.183278] pcpu-alloc: s194408 r8192 d30872 u524288 alloc=1*2097152 [ 0.183281] pcpu-alloc: [0] 0 1 2 3 [ 0.183329] xen: PV spinlocks enabled [ 0.183332] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.183334] Kernel command line: placeholder root=/dev/mapper/italia0--vg-root ro console=hvc0 [ 0.183368] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.183459] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.183504] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.184161] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.184164] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.184166] software IO TLB: area num 4. [ 0.246281] Memory: 385780K/524284K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 138252K reserved, 0K cma-reserved) [ 0.246458] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.248592] Dynamic Preempt: voluntary [ 0.248760] rcu: Preemptible hierarchical RCU implementation. [ 0.248761] rcu: RCU event tracing is enabled. [ 0.248762] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.248763] Trampoline variant of Tasks RCU enabled. [ 0.248764] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.248765] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.248787] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.261038] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.261193] xen:events: Using FIFO-based ABI [ 0.261217] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.261226] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.261235] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.261243] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.261251] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.261259] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.261268] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.261276] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.261286] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.261294] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.261302] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.261311] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.261319] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.261327] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.261336] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.261346] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.266643] Console: colour VGA+ 80x25 [ 0.266646] printk: legacy console [tty0] enabled [ 0.282845] printk: legacy console [hvc0] enabled [ 0.284167] ACPI: Core revision 20240322 [ 0.288750] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.288907] Xen: using vcpuop timer interface [ 0.288912] installing Xen timer for CPU 0 [ 0.289063] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c955856658, max_idle_ns: 440795256416 ns [ 0.289220] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.94 BogoMIPS (lpj=3092972) [ 0.289523] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.289639] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.289766] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.289951] Spectre V2 : Mitigation: Retpolines [ 0.290227] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.290371] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.290489] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.290607] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.290755] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.291226] MDS: Mitigation: Clear CPU buffers [ 0.291338] MMIO Stale Data: Unknown: No mitigations [ 0.291472] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.291664] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.291782] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.291900] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.292018] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.310763] Freeing SMP alternatives memory: 40K [ 0.310940] pid_max: default: 32768 minimum: 301 [ 0.311070] LSM: initializing lsm=capability,selinux [ 0.311189] SELinux: Initializing. [ 0.311247] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.311391] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.311997] cpu 0 spinlock event irq 25 [ 0.312158] VPMU disabled by hypervisor. [ 0.312779] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.312931] signal: max sigframe size: 1776 [ 0.313118] rcu: Hierarchical SRCU implementation. [ 0.313224] rcu: Max phase no-delay instances is 400. [ 0.313847] smp: Bringing up secondary CPUs ... [ 0.314254] installing Xen timer for CPU 1 [ 0.314746] installing Xen timer for CPU 2 [ 0.315277] installing Xen timer for CPU 3 [ 0.028870] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0002 [ 0.315491] cpu 1 spinlock event irq 45 [ 0.028870] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0004 [ 0.316266] cpu 2 spinlock event irq 46 [ 0.028870] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0006 [ 0.316525] cpu 3 spinlock event irq 47 [ 0.317432] smp: Brought up 1 node, 4 CPUs [ 0.317725] devtmpfs: initialized [ 0.317725] x86/mm: Memory block size: 128MB [ 0.318477] ACPI: PM: Registering ACPI NVS region [mem 0xab9ba000-0xbba3afff] (268963840 bytes) [ 0.320587] ACPI: PM: Registering ACPI NVS region [mem 0xbede0000-0xbefdffff] (2097152 bytes) [ 0.320796] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.320949] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.321198] PM: RTC time: 22:39:58, date: 2024-06-30 [ 0.321390] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.321531] xen:grant_table: Grant tables using version 1 layout [ 0.321723] Grant table initialized [ 0.321954] audit: initializing netlink subsys (disabled) [ 0.322231] audit: type=2000 audit(1719787199.503:1): state=initialized audit_enabled=0 res=1 [ 0.322395] thermal_sys: Registered thermal governor 'step_wise' [ 0.322395] thermal_sys: Registered thermal governor 'user_space' [ 0.322417] Simple Boot Flag at 0x4f set to 0x1 [ 0.322664] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.323237] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f] [ 0.323388] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved as E820 entry [ 0.360705] PCI: Using configuration type 1 for base access [ 0.360884] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.361277] ACPI: Added _OSI(Module Device) [ 0.361367] ACPI: Added _OSI(Processor Device) [ 0.361480] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.361593] ACPI: Added _OSI(Processor Aggregator Device) [ 0.368441] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.369160] xen: registering gsi 9 triggering 0 polarity 0 [ 0.369648] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.373278] ACPI: Dynamic OEM Table Load: [ 0.373397] ACPI: SSDT 0xFFFF888003937000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20100331) [ 0.374163] ACPI: Dynamic OEM Table Load: [ 0.374234] ACPI: SSDT 0xFFFF88800399E400 000303 (v01 PmRef ApIst 00003000 INTL 20100331) [ 0.374819] ACPI: Dynamic OEM Table Load: [ 0.374935] ACPI: SSDT 0xFFFF888003980A00 000119 (v01 PmRef ApCst 00003000 INTL 20100331) [ 0.375910] ACPI: _OSC evaluated successfully for all CPUs [ 0.376165] ACPI: Interpreter enabled [ 0.376240] ACPI: PM: (supports S0 S1 S3 S5) [ 0.376354] ACPI: Using IOAPIC for interrupt routing [ 0.376548] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.376697] PCI: Using E820 reservations for host bridge windows [ 0.377045] ACPI: Enabled 10 GPEs in block 00 to 3F [ 0.385462] acpi ABCDEFGH:00: ACPI dock station (docks/bays count: 1) [ 0.388115] ACPI: \_TZ_.FN00: New power resource [ 0.388284] ACPI: \_TZ_.FN01: New power resource [ 0.388457] ACPI: \_TZ_.FN02: New power resource [ 0.388629] ACPI: \_TZ_.FN03: New power resource [ 0.388851] ACPI: \_TZ_.FN04: New power resource [ 0.389680] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.389805] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.390422] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.391090] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.391211] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.391909] PCI host bridge to bus 0000:00 [ 0.392023] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.392143] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.392225] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.392369] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000e7fff window] [ 0.392512] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window] [ 0.392655] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.392797] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.392997] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000 conventional PCI endpoint [ 0.393671] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 conventional PCI endpoint [ 0.393891] pci 0000:00:19.0: BAR 0 [mem 0xc1b00000-0xc1b1ffff] [ 0.394049] pci 0000:00:19.0: BAR 1 [mem 0xc1b70000-0xc1b70fff] [ 0.394206] pci 0000:00:19.0: BAR 2 [io 0x4040-0x405f] [ 0.394557] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.394901] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 conventional PCI endpoint [ 0.395121] pci 0000:00:1a.0: BAR 0 [mem 0xc1b60000-0xc1b603ff] [ 0.395675] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.396016] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 PCIe Root Port [ 0.396319] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.396451] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.396581] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc19fffff] [ 0.396752] pci 0000:00:1c.0: bridge window [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.397229] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.397441] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.397562] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.397876] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 PCIe Root Port [ 0.398177] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.398242] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.398373] pci 0000:00:1c.4: bridge window [mem 0xc1a00000-0xc1afffff] [ 0.398823] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.399029] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.399149] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.399467] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 conventional PCI endpoint [ 0.399687] pci 0000:00:1d.0: BAR 0 [mem 0xc1b50000-0xc1b503ff] [ 0.400214] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.400544] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 conventional PCI bridge [ 0.400878] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.401027] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc0ffffff] [ 0.401489] pci 0000:00:1f.0: [8086:1c52] type 00 class 0x060100 conventional PCI endpoint [ 0.402302] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 conventional PCI endpoint [ 0.402522] pci 0000:00:1f.2: BAR 0 [io 0x4090-0x4097] [ 0.402675] pci 0000:00:1f.2: BAR 1 [io 0x4080-0x4083] [ 0.402829] pci 0000:00:1f.2: BAR 2 [io 0x4070-0x4077] [ 0.402982] pci 0000:00:1f.2: BAR 3 [io 0x4060-0x4063] [ 0.403135] pci 0000:00:1f.2: BAR 4 [io 0x4020-0x403f] [ 0.403264] pci 0000:00:1f.2: BAR 5 [mem 0xc1b40000-0xc1b407ff] [ 0.403661] pci 0000:00:1f.2: PME# supported from D3hot [ 0.403965] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 conventional PCI endpoint [ 0.404206] pci 0000:00:1f.3: BAR 0 [mem 0xc1b30000-0xc1b300ff 64bit] [ 0.404342] pci 0000:00:1f.3: BAR 4 [io 0x4000-0x401f] [ 0.404863] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.405287] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.405528] pci 0000:02:00.0: BAR 0 [mem 0xc1a00000-0xc1a1ffff] [ 0.405750] pci 0000:02:00.0: BAR 2 [io 0x2000-0x201f] [ 0.405917] pci 0000:02:00.0: BAR 3 [mem 0xc1a20000-0xc1a23fff] [ 0.406562] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.407101] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.407360] pci_bus 0000:03: extended config space not accessible [ 0.407594] pci 0000:03:02.0: [126f:0712] type 00 class 0x030000 conventional PCI endpoint [ 0.407814] pci 0000:03:02.0: BAR 0 [mem 0xc0000000-0xc0ffffff] [ 0.408203] pci 0000:03:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.408332] pci 0000:03:02.0: supports D1 D2 [ 0.408744] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.408909] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.409058] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.409206] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.409224] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000e7fff window] (subtractive decode) [ 0.409374] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff window] (subtractive decode) [ 0.409523] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.409779] pci_bus 0000:00: on NUMA node 0 [ 0.409982] xen: registering gsi 13 triggering 1 polarity 0 [ 0.410490] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.410680] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.410867] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.410986] ACPI: PCI: Interrupt link LNKC disabled [ 0.411169] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.411294] ACPI: PCI: Interrupt link LNKE configured for IRQ 3 [ 0.411481] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 0.411667] ACPI: PCI: Interrupt link LNKG configured for IRQ 5 [ 0.411852] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.411969] ACPI: PCI: Interrupt link LNKH disabled [ 0.412405] xen:balloon: Initialising balloon driver [ 0.412578] iommu: Default domain type: Translated [ 0.412578] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.412578] SCSI subsystem initialized [ 0.413240] libata version 3.00 loaded. [ 0.413262] ACPI: bus type USB registered [ 0.413387] usbcore: registered new interface driver usbfs [ 0.413508] usbcore: registered new interface driver hub [ 0.413629] usbcore: registered new device driver usb [ 0.413756] pps_core: LinuxPPS API ver. 1 registered [ 0.413914] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.414065] PTP clock support registered [ 0.414268] Advanced Linux Sound Architecture Driver Initialized. [ 0.414561] NetLabel: Initializing [ 0.414674] NetLabel: domain hash size = 128 [ 0.414787] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.414918] NetLabel: unlabeled traffic allowed by default [ 0.415254] PCI: Using ACPI for IRQ routing [ 0.426143] PCI: pci_cache_line_size set to 64 bytes [ 0.426322] e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff] [ 0.426325] e820: reserve RAM buffer [mem 0x20065000-0x23ffffff] [ 0.426348] pci 0000:03:02.0: vgaarb: setting as boot VGA device [ 0.426367] pci 0000:03:02.0: vgaarb: bridge control possible [ 0.426484] pci 0000:03:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.426631] vgaarb: loaded [ 0.427597] clocksource: Switched to clocksource tsc-early [ 0.427778] VFS: Disk quotas dquot_6.6.0 [ 0.427895] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.428040] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.428193] pnp: PnP ACPI init [ 0.428193] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.428193] system 00:00: [io 0xffff] has been reserved [ 0.428297] system 00:00: [io 0xffff] has been reserved [ 0.428411] system 00:00: [io 0xffff] has been reserved [ 0.428525] system 00:00: [io 0x0400-0x0453] has been reserved [ 0.428689] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.428807] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.428927] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.428940] system 00:00: [io 0x0900-0x090f] has been reserved [ 0.428940] system 00:00: [io 0x0295-0x0296] has been reserved [ 0.429307] xen: registering gsi 8 triggering 1 polarity 0 [ 0.429368] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.429769] xen: registering gsi 4 triggering 1 polarity 0 [ 0.429773] Already setup the GSI :4 [ 0.430330] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.430453] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.430574] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.430694] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.430812] system 00:04: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.430932] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.431050] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.431171] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.431301] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved [ 0.431468] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.431586] system 00:04: [mem 0xc1b90000-0xc1b90fff] has been reserved [ 0.431968] system 00:05: [mem 0x00000000-0x0009cfff] could not be reserved [ 0.432135] pnp: PnP ACPI: found 6 devices [ 0.460552] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.460693] NET: Registered PF_INET protocol family [ 0.460852] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.461172] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.461336] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.461536] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.461714] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.461935] TCP: Hash tables configured (established 4096 bind 4096) [ 0.462072] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.462194] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.462353] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.462673] RPC: Registered named UNIX socket transport module. [ 0.462794] RPC: Registered udp transport module. [ 0.462907] RPC: Registered tcp transport module. [ 0.463020] RPC: Registered tcp-with-tls transport module. [ 0.463135] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.463641] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.463765] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.463902] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc19fffff] [ 0.464033] pci 0000:00:1c.0: bridge window [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.464200] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.464333] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.464467] pci 0000:00:1c.4: bridge window [mem 0xc1a00000-0xc1afffff] [ 0.464659] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 0.464790] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc0ffffff] [ 0.464944] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.465063] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.465182] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.465312] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000e7fff window] [ 0.465432] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfeafffff window] [ 0.465552] pci_bus 0000:00: resource 9 [mem 0xfed40000-0xfed44fff window] [ 0.465672] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.465788] pci_bus 0000:01: resource 1 [mem 0xc1000000-0xc19fffff] [ 0.465907] pci_bus 0000:01: resource 2 [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.466088] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.466204] pci_bus 0000:02: resource 1 [mem 0xc1a00000-0xc1afffff] [ 0.466332] pci_bus 0000:03: resource 1 [mem 0xc0000000-0xc0ffffff] [ 0.466451] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.466569] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.466688] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.466806] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000e7fff window] [ 0.466927] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xfeafffff window] [ 0.467047] pci_bus 0000:03: resource 9 [mem 0xfed40000-0xfed44fff window] [ 0.467290] xen: registering gsi 22 triggering 0 polarity 1 [ 0.467314] xen: --> pirq=22 -> irq=22 (gsi=22) [ 0.489311] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x7c0 took 21557 usecs [ 0.489531] xen: registering gsi 20 triggering 0 polarity 1 [ 0.489549] xen: --> pirq=20 -> irq=20 (gsi=20) [ 0.511357] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x7c0 took 21358 usecs [ 0.511556] PCI: CLS 64 bytes, default 64 [ 0.511706] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.511748] Unpacking initramfs... [ 0.511824] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.512140] kvm_intel: VMX not supported by CPU 0 [ 0.512270] kvm_amd: CPU 0 isn't AMD or Hygon [ 0.512443] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c955856658, max_idle_ns: 440795256416 ns [ 0.512671] clocksource: Switched to clocksource tsc [ 0.517975] Initialise system trusted keyrings [ 0.518212] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.518504] NFS: Registering the id_resolver key type [ 0.518627] Key type id_resolver registered [ 0.518738] Key type id_legacy registered [ 0.518921] 9p: Installing v9fs 9p2000 file system support [ 0.532423] Key type asymmetric registered [ 0.532550] Asymmetric key parser 'x509' registered [ 0.532692] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.532847] io scheduler mq-deadline registered [ 0.532973] io scheduler kyber registered [ 0.533523] xen: registering gsi 16 triggering 0 polarity 1 [ 0.533556] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.533783] pcieport 0000:00:1c.0: PME: Signaling with IRQ 50 [ 0.534176] xen: registering gsi 16 triggering 0 polarity 1 [ 0.534181] Already setup the GSI :16 [ 0.534538] pcieport 0000:00:1c.4: PME: Signaling with IRQ 51 [ 0.534974] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.535171] ACPI: button: Sleep Button [SLPB] [ 0.535316] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.535516] ACPI: button: Power Button [PWRF] [ 0.536063] Monitor-Mwait will be used to enter C-1 state [ 0.536079] Monitor-Mwait will be used to enter C-3 state [ 0.536087] ACPI: \_PR_.CPU0: Found 2 idle states [ 0.536450] ACPI: \_PR_.CPU1: Found 2 idle states [ 0.536802] ACPI: \_PR_.CPU2: Found 2 idle states [ 0.537476] ACPI: \_PR_.CPU3: Found 2 idle states [ 0.538039] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.538160] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.538475] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.538595] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.539075] xen:xen_evtchn: Event-channel device installed [ 0.539275] xen_pciback: backend is vpci [ 0.540069] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.540897] hpet_acpi_add: no address or irqs in _CRS [ 0.541083] Non-volatile memory driver v1.3 [ 0.542784] loop: module loaded [ 0.547675] ahci 0000:00:1f.2: version 3.0 [ 0.547780] xen: registering gsi 21 triggering 0 polarity 1 [ 0.547807] xen: --> pirq=21 -> irq=21 (gsi=21) [ 0.558162] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 3 Gbps, SATA mode [ 0.558322] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 0.560066] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 0.575639] scsi host0: ahci [ 0.576092] scsi host1: ahci [ 0.576568] scsi host2: ahci [ 0.576899] scsi host3: ahci [ 0.577213] scsi host4: ahci [ 0.577540] scsi host5: ahci [ 0.577687] ata1: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40100 irq 53 lpm-pol 0 [ 0.577837] ata2: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40180 irq 53 lpm-pol 0 [ 0.578006] ata3: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40200 irq 53 lpm-pol 0 [ 0.578153] ata4: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40280 irq 53 lpm-pol 0 [ 0.578300] ata5: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40300 irq 53 lpm-pol 0 [ 0.578447] ata6: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40380 irq 53 lpm-pol 0 [ 0.578819] tun: Universal TUN/TAP device driver, 1.6 [ 0.579060] e100: Intel(R) PRO/100 Network Driver [ 0.579180] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.579303] sky2: driver version 1.30 [ 0.579438] xen_netfront: Initialising Xen virtual ethernet driver [ 0.579720] usbcore: registered new interface driver usblp [ 0.579861] usbcore: registered new interface driver usb-storage [ 0.579918] xen: registering gsi 22 triggering 0 polarity 1 [ 0.579956] xen: registering gsi 20 triggering 0 polarity 1 [ 0.579963] Already setup the GSI :20 [ 0.580029] i8042: PNP: No PS/2 controller found. [ 0.580034] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.580091] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.580109] Already setup the GSI :22 [ 0.580129] ehci-pci 0000:00:1d.0: debug port 2 [ 0.580375] rtc_cmos 00:01: RTC can wake from S4 [ 0.581529] rtc_cmos 00:01: registered as rtc0 [ 0.581713] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram [ 0.581897] device-mapper: uevent: version 1.0.3 [ 0.582125] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.582297] intel_pstate: CPU model not supported [ 0.582437] hid: raw HID events driver (C) Jiri Kosina [ 0.582670] usbcore: registered new interface driver usbhid [ 0.582803] usbhid: USB HID core driver [ 0.583225] Initializing XFRM netlink socket [ 0.583463] NET: Registered PF_INET6 protocol family [ 0.583915] Segment Routing with IPv6 [ 0.584051] In-situ OAM (IOAM) with IPv6 [ 0.584185] xen: registering gsi 22 triggering 0 polarity 1 [ 0.584192] Already setup the GSI :22 [ 0.584197] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.584226] ehci-pci 0000:00:1d.0: irq 20, io mem 0xc1b50000 [ 0.584300] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.584448] NET: Registered PF_PACKET protocol family [ 0.584810] 9pnet: Installing 9P2000 support [ 0.584957] Key type dns_resolver registered [ 0.585962] IPI shorthand broadcast: enabled [ 0.586226] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.588328] sched_clock: Marking stable (560006305, 27870396)->(593356243, -5479542) [ 0.588834] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.589311] registered taskstats version 1 [ 0.589423] Loading compiled-in X.509 certificates [ 0.590660] PM: Magic number: 12:722:705 [ 0.590839] printk: legacy console [netcon0] enabled [ 0.590909] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.590969] netconsole: network logging started [ 0.591203] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.591436] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.591450] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.591579] usb usb1: Product: EHCI Host Controller [ 0.591836] usb usb1: Manufacturer: Linux 6.10.0-rc5+ ehci_hcd [ 0.591967] usb usb1: SerialNumber: 0000:00:1d.0 [ 0.592282] hub 1-0:1.0: USB hub found [ 0.592412] hub 1-0:1.0: 2 ports detected [ 0.592711] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.592966] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 2 [ 0.593147] ehci-pci 0000:00:1a.0: debug port 2 [ 0.597205] ehci-pci 0000:00:1a.0: irq 22, io mem 0xc1b60000 [ 0.603900] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.604159] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.604312] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.604460] usb usb2: Product: EHCI Host Controller [ 0.604577] usb usb2: Manufacturer: Linux 6.10.0-rc5+ ehci_hcd [ 0.604623] Freeing initrd memory: 20852K [ 0.604695] usb usb2: SerialNumber: 0000:00:1a.0 [ 0.605141] hub 2-0:1.0: USB hub found [ 0.605328] hub 2-0:1.0: 2 ports detected [ 0.616353] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.616664] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.617284] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.617467] ALSA device list: [ 0.617577] No soundcards found. [ 0.834979] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.842981] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.887629] ata2: SATA link down (SStatus 0 SControl 300) [ 0.887772] ata6: SATA link down (SStatus 0 SControl 300) [ 0.887928] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.888070] ata5: SATA link down (SStatus 0 SControl 300) [ 0.888209] ata4: SATA link down (SStatus 0 SControl 300) [ 0.888343] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.890081] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 0.890685] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.892291] ata1.00: configured for UDMA/133 [ 0.892425] ata3.00: ATAPI: Slimtype DVD A DS8ABSH, AP52, max UDMA/100 [ 0.892614] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 0.893740] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.893751] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.893785] sd 0:0:0:0: [sda] Write Protect is off [ 0.894133] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.894197] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.894461] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 0.899278] ata3.00: configured for UDMA/100 [ 0.911572] scsi 2:0:0:0: CD-ROM Slimtype DVD A DS8ABSH AP52 PQ: 0 ANSI: 5 [ 0.928065] sda: sda1 sda2 < sda5 > [ 0.928647] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.954205] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.954357] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.964680] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.964830] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.965335] hub 1-1:1.0: USB hub found [ 0.965679] hub 1-1:1.0: 6 ports detected [ 0.970255] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 0.970396] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 0.972237] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.972387] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.972387] Freeing unused kernel image (initmem) memory: 2680K [ 0.972643] Write protecting the kernel read-only data: 24576k [ 0.972643] hub 2-1:1.0: USB hub found [ 0.972987] hub 2-1:1.0: 6 ports detected [ 0.994371] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 1.169963] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.170091] Run /init as init process [ 1.170202] with arguments: [ 1.170203] /init [ 1.170204] placeholder [ 1.170205] with environment: [ 1.170206] HOME=/ [ 1.170206] TERM=linux [ 1.519625] e1000e: Intel(R) PRO/1000 Network Driver [ 1.519753] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.520047] xen: registering gsi 19 triggering 0 polarity 1 [ 1.520894] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.521147] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.628034] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 1.725370] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:67:96:a4:17 [ 1.725525] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.725677] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 0050FF-0FF [ 1.725931] xen: registering gsi 16 triggering 0 polarity 1 [ 1.725939] Already setup the GSI :16 [ 1.726366] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.769975] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 1.816355] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:1e:67:96:a4:16 [ 1.816508] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 1.816714] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 1000FF-0FF [ 1.819034] e1000e 0000:02:00.0 enx001e6796a416: renamed from eth1 [ 1.819408] e1000e 0000:00:19.0 enx001e6796a417: renamed from eth0 [ 1.873891] random: crng init done [ 2.632961] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 2.637905] EXT4-fs (dm-0): mounted filesystem be51a86d-7441-4273-98cd-286921744bfc ro with ordered data mode. Quota mode: none. [ 5.995195] EXT4-fs (dm-0): re-mounted be51a86d-7441-4273-98cd-286921744bfc r/w. Quota mode: none. [ 7.552402] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 7.571314] EXT4-fs (sda1): mounted filesystem 5226adce-b675-4df9-835a-363dae2a7fc2 r/w with ordered data mode. Quota mode: none. [ 7.647862] Adding 1949692k swap on /dev/mapper/italia0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 9.474902] xenbr0: port 1(enx001e6796a416) entered blocking state [ 9.475104] xenbr0: port 1(enx001e6796a416) entered disabled state [ 9.475229] e1000e 0000:02:00.0 enx001e6796a416: entered allmulticast mode [ 9.475385] e1000e 0000:02:00.0 enx001e6796a416: entered promiscuous mode [ 12.031885] e1000e 0000:02:00.0 enx001e6796a416: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 12.032438] xenbr0: port 1(enx001e6796a416) entered blocking state [ 12.032559] xenbr0: port 1(enx001e6796a416) entered forwarding state