[ 0.000000] Linux version 6.1.96+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Mon Jul 1 02:07:50 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000458] tsc: Detected 2199.998 MHz processor [ 0.000901] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000905] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000911] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000913] Disabled [ 0.000914] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000918] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000957] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027616] RAMDISK: [mem 0x04000000-0x05421fff] [ 0.027624] ACPI: Early table checksum verification disabled [ 0.028223] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028235] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028272] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028320] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028336] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028352] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028368] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028384] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028400] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028416] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028432] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028448] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028464] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028480] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028496] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028512] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028528] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028544] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028560] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028576] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028592] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028608] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028616] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028618] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028619] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028620] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028621] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028622] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028623] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028624] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028625] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028626] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028627] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028628] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028628] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028629] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028630] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028631] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028632] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028633] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028634] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028635] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028685] Setting APIC routing to Xen PV. [ 0.032636] Zone ranges: [ 0.032637] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032640] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032642] Normal empty [ 0.032643] Movable zone start for each node [ 0.032643] Early memory node ranges [ 0.032644] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032646] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032647] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032652] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032687] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034240] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034245] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221752] Remapped 102 page(s) [ 0.223122] ACPI: PM-Timer IO Port: 0x408 [ 0.223175] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223178] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223180] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223181] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223182] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223184] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223185] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223187] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223216] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223229] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223232] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223258] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223263] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223333] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223348] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223350] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223351] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223353] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223357] Booting kernel on Xen [ 0.223358] Xen version: 4.19-unstable (preserve-AD) [ 0.223361] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229593] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.229877] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.229883] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.229886] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.229965] xen: PV spinlocks enabled [ 0.229968] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.229973] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.229975] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230013] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230022] random: crng init done [ 0.230071] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230096] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231417] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231420] software IO TLB: area num 8. [ 0.290802] Memory: 389300K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1576K init, 1296K bss, 134732K reserved, 0K cma-reserved) [ 0.290970] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.293459] Dynamic Preempt: voluntary [ 0.293558] rcu: Preemptible hierarchical RCU implementation. [ 0.293559] rcu: RCU event tracing is enabled. [ 0.293560] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.293561] Trampoline variant of Tasks RCU enabled. [ 0.293562] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.293563] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.304057] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.304182] xen:events: Using FIFO-based ABI [ 0.304206] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.304215] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.304222] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.304230] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.304237] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.304245] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.304252] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.304260] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.304267] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.304275] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.304282] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.304290] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.304297] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.304306] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.304314] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.304325] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.309679] Console: colour VGA+ 80x25 [ 0.324442] printk: console [tty0] enabled [ 0.325773] printk: console [hvc0] enabled [ 0.325912] ACPI: Core revision 20220331 [ 0.341390] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.341557] Xen: using vcpuop timer interface [ 0.341564] installing Xen timer for CPU 0 [ 0.341713] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.341872] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199998) [ 0.342201] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.342317] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.342444] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.342593] Spectre V2 : Mitigation: Retpolines [ 0.342878] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.343044] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.343164] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.343285] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.343434] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.343552] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.343704] MDS: Mitigation: Clear CPU buffers [ 0.343817] TAA: Mitigation: Clear CPU buffers [ 0.343876] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.344041] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.344187] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.344338] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.344458] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.344577] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.362274] Freeing SMP alternatives memory: 40K [ 0.362401] pid_max: default: 32768 minimum: 301 [ 0.362893] LSM: Security Framework initializing [ 0.363016] SELinux: Initializing. [ 0.363160] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363307] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363963] cpu 0 spinlock event irq 25 [ 0.364083] VPMU disabled by hypervisor. [ 0.364518] cblist_init_generic: Setting adjustable number of callback queues. [ 0.364664] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.364819] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.364876] signal: max sigframe size: 1776 [ 0.365040] rcu: Hierarchical SRCU implementation. [ 0.365171] rcu: Max phase no-delay instances is 400. [ 0.365661] smp: Bringing up secondary CPUs ... [ 0.365993] installing Xen timer for CPU 1 [ 0.366461] cpu 1 spinlock event irq 35 [ 0.367013] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.367182] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.367371] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.368095] installing Xen timer for CPU 2 [ 0.368554] cpu 2 spinlock event irq 41 [ 0.368948] installing Xen timer for CPU 3 [ 0.369376] cpu 3 spinlock event irq 47 [ 0.369376] installing Xen timer for CPU 4 [ 0.370211] cpu 4 spinlock event irq 53 [ 0.370211] installing Xen timer for CPU 5 [ 0.371038] cpu 5 spinlock event irq 59 [ 0.371077] installing Xen timer for CPU 6 [ 0.371915] cpu 6 spinlock event irq 65 [ 0.372132] installing Xen timer for CPU 7 [ 0.372584] cpu 7 spinlock event irq 71 [ 0.373077] smp: Brought up 1 node, 8 CPUs [ 0.373203] smpboot: Max logical packages: 1 [ 0.373420] devtmpfs: initialized [ 0.373420] x86/mm: Memory block size: 128MB [ 0.374109] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.374138] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.374300] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.374549] PM: RTC time: 03:44:42, date: 2024-07-01 [ 0.375021] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.375164] xen:grant_table: Grant tables using version 1 layout [ 0.375300] Grant table initialized [ 0.375603] audit: initializing netlink subsys (disabled) [ 0.375884] audit: type=2000 audit(1719805482.849:1): state=initialized audit_enabled=0 res=1 [ 0.375961] thermal_sys: Registered thermal governor 'step_wise' [ 0.375961] thermal_sys: Registered thermal governor 'user_space' [ 0.376097] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.376534] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.376884] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.505828] PCI: Using configuration type 1 for base access [ 0.508400] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.508947] ACPI: Added _OSI(Module Device) [ 0.508947] ACPI: Added _OSI(Processor Device) [ 0.508992] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.509106] ACPI: Added _OSI(Processor Aggregator Device) [ 0.539259] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.541254] xen: registering gsi 9 triggering 0 polarity 0 [ 0.543822] ACPI: Dynamic OEM Table Load: [ 0.551993] ACPI: Interpreter enabled [ 0.552126] ACPI: PM: (supports S0 S4 S5) [ 0.552238] ACPI: Using IOAPIC for interrupt routing [ 0.552384] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.552535] PCI: Using E820 reservations for host bridge windows [ 0.553323] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.588510] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.588639] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.588880] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.589144] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.589264] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.589441] PCI host bridge to bus 0000:ff [ 0.589563] pci_bus 0000:ff: root bus resource [bus ff] [ 0.589757] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.590203] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.590628] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.591051] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.591692] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.592118] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.592544] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.592969] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.593417] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.593850] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.594365] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.594796] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.595370] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.595792] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.596191] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.596611] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.597034] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.597460] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.597719] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.598180] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.598651] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.599327] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.599793] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.600222] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.600688] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.601146] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.601569] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.602227] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.602693] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.603371] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.603839] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.604219] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.604648] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.605071] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.605494] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.605929] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.606395] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.606930] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.607397] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.607913] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.608336] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.608758] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.609183] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.609431] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.610079] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.610506] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.611143] pci_bus 0000:ff: on NUMA node 0 [ 0.615647] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.615775] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.616003] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.616003] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.616081] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.616575] PCI host bridge to bus 0000:00 [ 0.616689] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.616810] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.616870] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.616870] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.616870] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.616870] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.618073] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.618593] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.618964] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.619483] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.619869] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.620390] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.620744] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.621258] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.621632] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.622157] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.622524] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.623053] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.623422] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.623997] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.624618] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.625285] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.625508] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.625970] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.626318] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.626535] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.627004] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.627307] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.627524] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.627985] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.628350] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.628547] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.629082] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.629400] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.629953] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.630153] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.630275] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.638042] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.638595] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.638790] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.638883] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.639178] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.639730] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.639928] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.640050] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.640338] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.640894] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.641089] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.641210] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.641532] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.641733] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.642264] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.642583] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.643340] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.643534] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.643693] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.643850] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.643916] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.644074] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.644231] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.644549] pci 0000:00:1f.2: PME# supported from D3hot [ 0.644829] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.644972] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.645216] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.645594] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.645822] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.646466] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.646759] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.647093] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.647305] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.648056] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.648268] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.648980] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.649192] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.649897] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.650109] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.650804] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.650893] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.651232] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.651445] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.651729] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.651914] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.652264] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.652485] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.652606] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.652811] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.652874] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.653446] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.653659] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.653949] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.654133] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.654481] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.654683] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.654804] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.654924] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.655052] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.655613] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.655747] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.655888] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.656179] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.656470] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.656831] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.656875] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.657081] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.657297] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.657463] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.657997] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.658457] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.658582] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.658711] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.659066] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.659216] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.659422] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.659638] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.659803] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.660284] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.660755] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.660885] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.661013] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.661351] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.661742] pci 0000:09:00.0: enabling Extended Tags [ 0.662085] pci 0000:09:00.0: supports D1 D2 [ 0.662198] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.662552] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.662679] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.662807] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.663056] pci_bus 0000:0a: extended config space not accessible [ 0.663234] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.663439] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.663607] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.663774] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.664111] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.664400] pci 0000:0a:00.0: supports D1 D2 [ 0.664520] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.664953] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.665091] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.665223] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.665610] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.665810] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.665964] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.666125] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.666644] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.666882] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.667027] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.667253] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.667397] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.667955] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.668156] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.668365] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.668528] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.669046] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.669275] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.669420] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.669637] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.669782] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.670239] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.670440] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.670649] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.670810] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.671266] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.671496] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.671641] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.671858] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.671874] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.672401] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.672618] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.672827] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.672920] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.673430] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.673658] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.673808] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.673938] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.674082] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.674665] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.674791] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.674885] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.675032] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.675501] pci_bus 0000:00: on NUMA node 0 [ 0.675596] xen: registering gsi 13 triggering 1 polarity 0 [ 0.676569] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.676766] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.676949] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.677139] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.677329] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.677447] ACPI: PCI: Interrupt link LNKE disabled [ 0.677631] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.677757] ACPI: PCI: Interrupt link LNKF disabled [ 0.677946] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.678064] ACPI: PCI: Interrupt link LNKG disabled [ 0.678249] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.678367] ACPI: PCI: Interrupt link LNKH disabled [ 0.678631] xen:balloon: Initialising balloon driver [ 0.678968] iommu: Default domain type: Translated [ 0.685878] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.686064] SCSI subsystem initialized [ 0.686907] libata version 3.00 loaded. [ 0.686912] ACPI: bus type USB registered [ 0.687039] usbcore: registered new interface driver usbfs [ 0.687168] usbcore: registered new interface driver hub [ 0.687289] usbcore: registered new device driver usb [ 0.687416] pps_core: LinuxPPS API ver. 1 registered [ 0.687875] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.688027] PTP clock support registered [ 0.688163] Advanced Linux Sound Architecture Driver Initialized. [ 0.688167] NetLabel: Initializing [ 0.688278] NetLabel: domain hash size = 128 [ 0.688394] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.688892] NetLabel: unlabeled traffic allowed by default [ 0.689032] PCI: Using ACPI for IRQ routing [ 0.723271] PCI: pci_cache_line_size set to 64 bytes [ 0.724043] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.724046] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.724069] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.724069] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.724152] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.724301] vgaarb: loaded [ 0.726873] clocksource: Switched to clocksource tsc-early [ 0.726909] VFS: Disk quotas dquot_6.6.0 [ 0.726909] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.727402] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.727563] pnp: PnP ACPI init [ 0.728044] xen: registering gsi 8 triggering 1 polarity 0 [ 0.728188] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.728313] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.728432] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.728557] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.728676] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.728794] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.728934] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.729065] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.729185] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.729306] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.729425] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.729545] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.729665] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.730100] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.730224] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.730343] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.730461] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.730579] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.731024] xen: registering gsi 4 triggering 1 polarity 0 [ 0.731029] Already setup the GSI :4 [ 0.731142] pnp 00:03: [dma 0 disabled] [ 0.731455] xen: registering gsi 3 triggering 1 polarity 0 [ 0.731467] pnp 00:04: [dma 0 disabled] [ 0.732075] pnp: PnP ACPI: found 5 devices [ 0.763238] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.763396] NET: Registered PF_INET protocol family [ 0.763557] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.763949] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.764113] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.764261] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.764411] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.764584] TCP: Hash tables configured (established 4096 bind 4096) [ 0.764728] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.764850] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.765043] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.765419] RPC: Registered named UNIX socket transport module. [ 0.765545] RPC: Registered udp transport module. [ 0.765659] RPC: Registered tcp transport module. [ 0.765772] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.766384] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.766557] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.766721] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.766899] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.767063] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.767240] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.767452] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.767586] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.767749] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.767886] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.768045] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.768192] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.768337] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.768459] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.768604] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.768788] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.768960] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.769087] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.769232] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.769376] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.769521] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.769643] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.769788] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.769958] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.770146] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.770281] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.770414] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.770585] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.770758] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.770956] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.771083] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.771222] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.771383] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.771542] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.771681] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.771843] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.771990] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.772134] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.772300] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.772420] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.772558] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.772722] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.772934] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.773104] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.773258] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.773411] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.773564] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.773717] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.773882] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.774048] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.774170] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.774347] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.774481] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.774655] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.774804] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.774946] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.775074] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.775195] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.775316] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.775436] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.775555] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.775737] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.775853] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.776001] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.776119] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.776238] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.776354] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.776473] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.776589] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.776708] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.776823] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.776967] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.777554] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.777775] xen: registering gsi 19 triggering 0 polarity 1 [ 0.777802] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.786602] xen: registering gsi 18 triggering 0 polarity 1 [ 0.786623] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.804107] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 17146 usecs [ 0.804347] xen: registering gsi 18 triggering 0 polarity 1 [ 0.804353] Already setup the GSI :18 [ 0.821282] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 16589 usecs [ 0.821497] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.821671] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.821749] Unpacking initramfs... [ 0.821791] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.822163] kvm: no hardware support for 'kvm_intel' [ 0.830006] has_svm: not amd or hygon [ 0.830123] kvm: no hardware support for 'kvm_amd' [ 0.830247] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.830833] clocksource: Switched to clocksource tsc [ 0.833439] Initialise system trusted keyrings [ 0.833753] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.835274] NFS: Registering the id_resolver key type [ 0.835399] Key type id_resolver registered [ 0.835510] Key type id_legacy registered [ 0.835711] 9p: Installing v9fs 9p2000 file system support [ 0.849863] Key type asymmetric registered [ 0.849989] Asymmetric key parser 'x509' registered [ 0.850126] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.850281] io scheduler mq-deadline registered [ 0.850395] io scheduler kyber registered [ 0.851359] xen: registering gsi 16 triggering 0 polarity 1 [ 0.851389] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.851941] xen: registering gsi 16 triggering 0 polarity 1 [ 0.851947] Already setup the GSI :16 [ 0.852527] xen: registering gsi 16 triggering 0 polarity 1 [ 0.852532] Already setup the GSI :16 [ 0.852875] xen: registering gsi 16 triggering 0 polarity 1 [ 0.852879] Already setup the GSI :16 [ 0.853196] xen: registering gsi 16 triggering 0 polarity 1 [ 0.853200] Already setup the GSI :16 [ 0.853787] xen: registering gsi 16 triggering 0 polarity 1 [ 0.853792] Already setup the GSI :16 [ 0.854374] xen: registering gsi 16 triggering 0 polarity 1 [ 0.854379] Already setup the GSI :16 [ 0.854833] xen: registering gsi 17 triggering 0 polarity 1 [ 0.854850] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.855183] xen: registering gsi 19 triggering 0 polarity 1 [ 0.855187] Already setup the GSI :19 [ 0.855640] xen: registering gsi 16 triggering 0 polarity 1 [ 0.855645] Already setup the GSI :16 [ 0.856299] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.856474] ACPI: button: Power Button [PWRB] [ 0.856641] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.857001] ACPI: button: Power Button [PWRF] [ 0.857286] Monitor-Mwait will be used to enter C-1 state [ 0.857320] Monitor-Mwait will be used to enter C-2 state [ 0.857336] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.857756] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.858458] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.858847] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.859148] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.859591] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.859945] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.860430] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.861196] xen:xen_evtchn: Event-channel device installed [ 0.861388] xen_pciback: backend is vpci [ 0.862196] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.862508] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.863274] hpet_acpi_add: no address or irqs in _CRS [ 0.863510] Non-volatile memory driver v1.3 [ 0.863672] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.866112] loop: module loaded [ 0.872608] ahci 0000:00:1f.2: version 3.0 [ 0.872715] xen: registering gsi 16 triggering 0 polarity 1 [ 0.872725] Already setup the GSI :16 [ 0.873054] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.873205] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.889180] scsi host0: ahci [ 0.889573] scsi host1: ahci [ 0.889929] scsi host2: ahci [ 0.890276] scsi host3: ahci [ 0.890643] scsi host4: ahci [ 0.891087] scsi host5: ahci [ 0.891238] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 74 [ 0.891393] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 74 [ 0.891538] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 74 [ 0.891701] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 74 [ 0.891846] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 74 [ 0.891990] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 74 [ 0.892430] tun: Universal TUN/TAP device driver, 1.6 [ 0.892722] e100: Intel(R) PRO/100 Network Driver [ 0.892849] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.892987] sky2: driver version 1.30 [ 0.893175] xen_netfront: Initialising Xen virtual ethernet driver [ 0.893516] xen: registering gsi 18 triggering 0 polarity 1 [ 0.893526] Already setup the GSI :18 [ 0.893752] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.893943] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.894123] ehci-pci 0000:00:1a.0: debug port 2 [ 0.898256] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.904600] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.904823] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.904971] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.905119] usb usb1: Product: EHCI Host Controller [ 0.905251] usb usb1: Manufacturer: Linux 6.1.96+ ehci_hcd [ 0.905367] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.905655] hub 1-0:1.0: USB hub found [ 0.905779] hub 1-0:1.0: 2 ports detected [ 0.906144] xen: registering gsi 18 triggering 0 polarity 1 [ 0.906154] Already setup the GSI :18 [ 0.906345] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.906558] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.906734] ehci-pci 0000:00:1d.0: debug port 2 [ 0.910814] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.917621] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.917853] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.918002] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.918146] usb usb2: Product: EHCI Host Controller [ 0.918261] usb usb2: Manufacturer: Linux 6.1.96+ ehci_hcd [ 0.918376] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.918659] hub 2-0:1.0: USB hub found [ 0.918783] hub 2-0:1.0: 2 ports detected [ 0.919232] xen: registering gsi 19 triggering 0 polarity 1 [ 0.919242] Already setup the GSI :19 [ 0.919451] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.919649] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.920865] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.921338] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.921535] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.921691] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.921901] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.922049] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.922194] usb usb3: Product: xHCI Host Controller [ 0.922308] usb usb3: Manufacturer: Linux 6.1.96+ xhci-hcd [ 0.922424] usb usb3: SerialNumber: 0000:00:14.0 [ 0.922709] hub 3-0:1.0: USB hub found [ 0.922841] hub 3-0:1.0: 8 ports detected [ 0.923993] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.924145] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.924289] usb usb4: Product: xHCI Host Controller [ 0.924403] usb usb4: Manufacturer: Linux 6.1.96+ xhci-hcd [ 0.924520] usb usb4: SerialNumber: 0000:00:14.0 [ 0.924804] hub 4-0:1.0: USB hub found [ 0.924935] hub 4-0:1.0: 6 ports detected [ 0.926120] usbcore: registered new interface driver usblp [ 0.926264] usbcore: registered new interface driver usb-storage [ 0.926414] i8042: PNP: No PS/2 controller found. [ 0.926749] rtc_cmos 00:00: RTC can wake from S4 [ 0.927407] rtc_cmos 00:00: registered as rtc0 [ 0.927584] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.927878] device-mapper: uevent: version 1.0.3 [ 0.928035] Freeing initrd memory: 20616K [ 0.928122] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.928176] xen: registering gsi 18 triggering 0 polarity 1 [ 0.928308] intel_pstate: CPU model not supported [ 0.928313] Already setup the GSI :18 [ 0.928326] hid: raw HID events driver (C) Jiri Kosina [ 0.928466] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.928689] usbcore: registered new interface driver usbhid [ 0.928735] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.928827] usbhid: USB HID core driver [ 0.929255] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.929574] Initializing XFRM netlink socket [ 0.929843] NET: Registered PF_INET6 protocol family [ 0.930404] Segment Routing with IPv6 [ 0.930527] In-situ OAM (IOAM) with IPv6 [ 0.930693] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.930936] NET: Registered PF_PACKET protocol family [ 0.931089] 9pnet: Installing 9P2000 support [ 0.931215] Key type dns_resolver registered [ 0.932011] IPI shorthand broadcast: enabled [ 0.932150] sched_clock: Marking stable (894427233, 37542330)->(1779636106, -847666543) [ 0.932727] registered taskstats version 1 [ 0.932849] Loading compiled-in X.509 certificates [ 0.935292] PM: Magic number: 0:81:714 [ 0.935510] acpi LNXCPU:1e: hash matches [ 0.935690] printk: console [netcon0] enabled [ 0.935805] netconsole: network logging started [ 0.936139] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.948033] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.948382] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.949057] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.949234] ALSA device list: [ 0.949354] No soundcards found. [ 1.143649] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.159647] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.159915] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.204896] ata4: SATA link down (SStatus 0 SControl 300) [ 1.205033] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.205193] ata5: SATA link down (SStatus 0 SControl 300) [ 1.205348] ata1: SATA link down (SStatus 0 SControl 300) [ 1.205505] ata6: SATA link down (SStatus 0 SControl 300) [ 1.205672] ata2: SATA link down (SStatus 0 SControl 300) [ 1.206184] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.272195] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.272351] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.272722] hub 1-1:1.0: USB hub found [ 1.272942] hub 1-1:1.0: 4 ports detected [ 1.287233] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.287388] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.287512] usb 3-3: Product: USB2.0 Hub [ 1.288067] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.288220] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.288477] hub 3-3:1.0: USB hub found [ 1.288633] hub 2-1:1.0: USB hub found [ 1.288821] hub 2-1:1.0: 4 ports detected [ 1.289092] hub 3-3:1.0: 4 ports detected [ 1.289918] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.290048] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.317979] ata3.00: configured for UDMA/133 [ 1.318277] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.319233] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.319252] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.319572] sd 2:0:0:0: [sda] Write Protect is off [ 1.319715] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.319805] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.320041] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.339067] sda: sda1 sda2 < sda5 > [ 1.339466] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.340715] Freeing unused kernel image (initmem) memory: 1576K [ 1.340843] Write protecting the kernel read-only data: 22528k [ 1.358699] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.359959] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.405624] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.531869] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.532040] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.532814] hub 3-4:1.0: USB hub found [ 1.533032] hub 3-4:1.0: 4 ports detected [ 1.595628] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.673016] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.673171] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.673318] usb 3-3.2: Product: USB2.0 Hub [ 1.673995] hub 3-3.2:1.0: USB hub found [ 1.674463] hub 3-3.2:1.0: 4 ports detected [ 1.819819] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.819946] Run /init as init process [ 1.820056] with arguments: [ 1.820057] /init [ 1.820058] placeholder [ 1.820059] with environment: [ 1.820060] HOME=/ [ 1.820061] TERM=linux [ 1.826587] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.931021] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.931183] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.937031] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 1.989879] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 1.992838] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 1.993170] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.256765] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.256917] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.257288] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.257580] xen: registering gsi 16 triggering 0 polarity 1 [ 2.257591] Already setup the GSI :16 [ 2.261391] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.261518] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.261743] xen: registering gsi 16 triggering 0 polarity 1 [ 2.261752] Already setup the GSI :16 [ 2.288338] pps pps0: new PPS source ptp0 [ 2.288519] igb 0000:07:00.0: added PHC on eth0 [ 2.288668] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.288790] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.288955] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.289076] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.289310] xen: registering gsi 17 triggering 0 polarity 1 [ 2.289319] Already setup the GSI :17 [ 2.318833] pps pps1: new PPS source ptp1 [ 2.319029] igb 0000:08:00.0: added PHC on eth1 [ 2.319169] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.319290] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.319456] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.319595] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.319828] xen: registering gsi 16 triggering 0 polarity 1 [ 2.319835] Already setup the GSI :16 [ 2.377310] igb 0000:0b:00.0: added PHC on eth2 [ 2.377450] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.377591] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.377802] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.377918] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.378147] xen: registering gsi 17 triggering 0 polarity 1 [ 2.378155] Already setup the GSI :17 [ 2.435387] igb 0000:0b:00.1: added PHC on eth3 [ 2.435523] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.435659] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.435864] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.436011] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.436233] xen: registering gsi 18 triggering 0 polarity 1 [ 2.436240] Already setup the GSI :18 [ 2.494269] igb 0000:0b:00.2: added PHC on eth4 [ 2.494411] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.494533] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.494761] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.494879] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.495126] xen: registering gsi 19 triggering 0 polarity 1 [ 2.495135] Already setup the GSI :19 [ 2.552691] igb 0000:0b:00.3: added PHC on eth5 [ 2.552830] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.552951] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.553155] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.553271] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.556547] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.566079] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.575766] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.586901] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.599800] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.612422] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 2.991149] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.119870] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.120028] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.417822] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.418130] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.418349] xen: registering gsi 17 triggering 0 polarity 1 [ 3.418359] Already setup the GSI :17 [ 4.153098] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.289120] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.289360] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.579531] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.582304] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 4.591232] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.998259] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.006697] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.609892] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.788855] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.797887] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.887851] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.418521] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.418719] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.418901] device enx0cc47a9f87be entered promiscuous mode [ 14.928184] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 15.133942] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 15.134246] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 15.134372] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 15.134669] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready