[ 0.000000] Linux version 6.10.0-rc6 (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Mon Jul 1 06:23:54 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/rimava1--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000095fff] usable [ 0.000000] Xen: [mem 0x0000000000096000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020069fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SCM/H8SCM, BIOS 3.5 11/25/2013 [ 0.000000] DMI: Memory slots populated: 1/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000013] Xen PV: Detected 6 vCPUS [ 0.037370] tsc: Fast TSC calibration using PIT [ 0.037372] tsc: Detected 3101.162 MHz processor [ 0.037374] tsc: Detected 3101.118 MHz TSC [ 0.037586] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.037591] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.037597] last_pfn = 0x2006a max_arch_pfn = 0x400000000 [ 0.037602] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.037604] MTRRs set to read-only [ 0.037608] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.062065] RAMDISK: [mem 0x04000000-0x0546efff] [ 0.062095] ACPI: Early table checksum verification disabled [ 0.063542] ACPI: RSDP 0x00000000000FA1D0 000024 (v02 ACPIAM) [ 0.063556] ACPI: XSDT 0x00000000DFEA0100 000084 (v01 SMCI 20131125 MSFT 00000097) [ 0.063599] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.063662] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20240322/tbfadt-560) [ 0.063674] ACPI: DSDT 0x00000000DFEA0600 005699 (v01 1BA11 1BA11000 00000000 INTL 20051117) [ 0.063686] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.063695] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.063707] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.063718] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.063729] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.063741] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.063753] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.063764] ACPI: SRAT 0x00000000DFEAA6F0 000108 (v02 AMD AGESA 00000001 AMD 00000001) [ 0.063775] ACPI: SSDT 0x00000000DFEAA800 001158 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.063786] ACPI: EINJ 0x00000000DFEAB960 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.063797] ACPI: BERT 0x00000000DFEABAF0 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.063808] ACPI: ERST 0x00000000DFEABB20 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.063818] ACPI: HEST 0x00000000DFEABD30 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.063824] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.063826] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c98] [ 0.063827] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.063829] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.063830] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.063832] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.063833] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.063834] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.063835] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.063837] ACPI: Reserving SRAT table memory at [mem 0xdfeaa6f0-0xdfeaa7f7] [ 0.063838] ACPI: Reserving SSDT table memory at [mem 0xdfeaa800-0xdfeab957] [ 0.063839] ACPI: Reserving EINJ table memory at [mem 0xdfeab960-0xdfeaba8f] [ 0.063840] ACPI: Reserving BERT table memory at [mem 0xdfeabaf0-0xdfeabb1f] [ 0.063841] ACPI: Reserving ERST table memory at [mem 0xdfeabb20-0xdfeabd2f] [ 0.063843] ACPI: Reserving HEST table memory at [mem 0xdfeabd30-0xdfeabdd7] [ 0.063980] APIC: Switched APIC routing to: Xen PV [ 0.066228] Zone ranges: [ 0.066231] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.066234] DMA32 [mem 0x0000000001000000-0x0000000020069fff] [ 0.066236] Normal empty [ 0.066238] Movable zone start for each node [ 0.066239] Early memory node ranges [ 0.066240] node 0: [mem 0x0000000000001000-0x0000000000095fff] [ 0.066243] node 0: [mem 0x0000000000100000-0x0000000020069fff] [ 0.066245] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020069fff] [ 0.066260] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.066397] On node 0, zone DMA: 106 pages in unavailable ranges [ 0.072112] On node 0, zone DMA32: 32662 pages in unavailable ranges [ 0.072134] p2m virtual area at (____ptrval____), size is 40000000 [ 0.279539] Remapped 106 page(s) [ 0.280056] ACPI: PM-Timer IO Port: 0x808 [ 0.280099] CPU topo: CPU limit of 6 reached. Ignoring further CPUs [ 0.280133] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.280138] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.280163] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.280172] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.280185] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.280192] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.280218] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.280223] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.280239] CPU topo: Max. logical packages: 1 [ 0.280240] CPU topo: Max. logical dies: 1 [ 0.280241] CPU topo: Max. dies per package: 1 [ 0.280249] CPU topo: Max. threads per core: 1 [ 0.280250] CPU topo: Num. cores per package: 6 [ 0.280251] CPU topo: Num. threads per package: 6 [ 0.280252] CPU topo: Allowing 6 present CPUs plus 0 hotplug CPUs [ 0.280253] CPU topo: Rejected CPUs 2 [ 0.280274] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.280277] PM: hibernation: Registered nosave memory: [mem 0x00096000-0x000fffff] [ 0.280280] [mem 0x2006a000-0xdfe9dfff] available for PCI devices [ 0.280286] Booting kernel on Xen [ 0.280287] Xen version: 4.19-unstable (preserve-AD) [ 0.280294] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.286642] setup_percpu: NR_CPUS:64 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1 [ 0.287967] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u262144 [ 0.287978] pcpu-alloc: s194408 r8192 d30872 u262144 alloc=1*2097152 [ 0.287984] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.288085] xen: PV spinlocks enabled [ 0.288091] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.288094] Kernel command line: placeholder root=/dev/mapper/rimava1--vg-root ro console=hvc0 [ 0.288191] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.288259] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.288398] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.288663] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.288669] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.288673] software IO TLB: area num 8. [ 0.427952] Memory: 385256K/524284K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 138776K reserved, 0K cma-reserved) [ 0.428108] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.431231] Dynamic Preempt: voluntary [ 0.431377] rcu: Preemptible hierarchical RCU implementation. [ 0.431379] rcu: RCU event tracing is enabled. [ 0.431380] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.431382] Trampoline variant of Tasks RCU enabled. [ 0.431384] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.431387] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.431416] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.438123] NR_IRQS: 4352, nr_irqs: 1016, preallocated irqs: 16 [ 0.438304] xen:events: Using FIFO-based ABI [ 0.438344] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.438351] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.438364] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.438369] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.438374] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.438379] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.438384] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.438389] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.438394] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.438399] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.438404] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.438409] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.438414] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.438419] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.438424] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.438439] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.444469] Console: colour VGA+ 80x25 [ 0.444476] printk: legacy console [tty0] enabled [ 0.457944] printk: legacy console [hvc0] enabled [ 0.458607] ACPI: Core revision 20240322 [ 0.464366] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.464527] Xen: using vcpuop timer interface [ 0.464535] installing Xen timer for CPU 0 [ 0.464788] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cb3681d801, max_idle_ns: 440795357179 ns [ 0.464952] Calibrating delay loop (skipped), value calculated using timer frequency.. 6202.23 BogoMIPS (lpj=3101118) [ 0.465149] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.465363] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.465473] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.465589] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.465964] Spectre V2 : Mitigation: Retpolines [ 0.466065] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.466210] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.466319] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.466428] RETBleed: Mitigation: untrained return thunk [ 0.466536] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.466692] Speculative Store Bypass: Vulnerable [ 0.466823] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.466953] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.467063] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.467172] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.467280] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.495357] Freeing SMP alternatives memory: 40K [ 0.495539] pid_max: default: 32768 minimum: 301 [ 0.495697] LSM: initializing lsm=capability,selinux [ 0.495818] SELinux: Initializing. [ 0.495992] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.496140] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.497096] cpu 0 spinlock event irq 57 [ 0.497211] VPMU disabled by hypervisor. [ 0.497702] Performance Events: PMU not available due to virtualization, using software events only. [ 0.497860] signal: max sigframe size: 1776 [ 0.498023] rcu: Hierarchical SRCU implementation. [ 0.498128] rcu: Max phase no-delay instances is 400. [ 0.504347] smp: Bringing up secondary CPUs ... [ 0.504686] installing Xen timer for CPU 1 [ 0.505178] installing Xen timer for CPU 2 [ 0.505555] installing Xen timer for CPU 3 [ 0.506884] installing Xen timer for CPU 4 [ 0.509054] installing Xen timer for CPU 5 [ 0.027502] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0011 [ 0.510075] cpu 1 spinlock event irq 87 [ 0.027502] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0012 [ 0.510948] cpu 2 spinlock event irq 88 [ 0.027502] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0013 [ 0.512163] cpu 3 spinlock event irq 89 [ 0.027502] [Firmware Bug]: CPU 4: APIC ID mismatch. CPUID: 0x0004 APIC: 0x0014 [ 0.513005] cpu 4 spinlock event irq 90 [ 0.027502] [Firmware Bug]: CPU 5: APIC ID mismatch. CPUID: 0x0005 APIC: 0x0015 [ 0.514197] cpu 5 spinlock event irq 91 [ 0.515232] smp: Brought up 1 node, 6 CPUs [ 0.516103] devtmpfs: initialized [ 0.516130] x86/mm: Memory block size: 128MB [ 0.517221] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.517221] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.517361] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.517951] PM: RTC time: 07:08:30, date: 2024-07-01 [ 0.518381] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.518541] xen:grant_table: Grant tables using version 1 layout [ 0.518713] Grant table initialized [ 0.519149] audit: initializing netlink subsys (disabled) [ 0.519312] audit: type=2000 audit(1719817710.566:1): state=initialized audit_enabled=0 res=1 [ 0.519312] thermal_sys: Registered thermal governor 'step_wise' [ 0.519312] thermal_sys: Registered thermal governor 'user_space' [ 0.520371] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.520955] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.725832] PCI: Using configuration type 1 for base access [ 0.726152] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.728193] ACPI: Added _OSI(Module Device) [ 0.728193] ACPI: Added _OSI(Processor Device) [ 0.728293] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.728403] ACPI: Added _OSI(Processor Aggregator Device) [ 0.750286] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.755215] xen: registering gsi 9 triggering 0 polarity 1 [ 0.760142] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.760542] ACPI: Interpreter enabled [ 0.760671] ACPI: PM: (supports S0 S1 S4 S5) [ 0.760853] ACPI: Using IOAPIC for interrupt routing [ 0.761194] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.761753] PCI: Using E820 reservations for host bridge windows [ 0.763395] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.801664] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.801809] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.801952] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.802065] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.802208] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.802758] PCI host bridge to bus 0000:00 [ 0.802861] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.802952] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.803065] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.803206] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.803351] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.803491] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.803662] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.804269] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.804765] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.804978] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.805096] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.805223] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.805384] pci 0000:00:09.0: enabling Extended Tags [ 0.805602] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.805897] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.806019] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.806136] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.806250] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.806416] pci 0000:00:0a.0: enabling Extended Tags [ 0.806638] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.806941] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 conventional PCI endpoint [ 0.807130] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.807259] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.807384] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.807511] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.807638] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.807764] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.808150] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.808336] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.808709] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.808896] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.809243] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.809429] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.809752] pci 0000:00:12.2: supports D1 D2 [ 0.809852] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.810109] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.810295] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.810674] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.810860] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.811240] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.811427] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.811748] pci 0000:00:13.2: supports D1 D2 [ 0.811853] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.812132] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.812633] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.812819] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.812945] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.813072] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.813239] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.813367] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.813523] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.813634] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.813742] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.813851] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.814135] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.814658] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.814888] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.814968] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.815088] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.815370] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.815556] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.815962] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.816339] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.816649] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.816960] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.817310] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.817670] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.818130] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.818321] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.818482] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.818615] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.819003] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.822016] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.822335] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.822530] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.822706] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.822841] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.823217] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.826004] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.826175] pci_bus 0000:03: extended config space not accessible [ 0.826361] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.826552] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.826693] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.826978] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.827227] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.827656] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.827788] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.827934] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.827951] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.828104] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.828252] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.828468] pci_bus 0000:00: on NUMA node 0 [ 0.829097] xen: registering gsi 13 triggering 1 polarity 0 [ 0.829596] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.829775] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.829965] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.830155] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.830336] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.830525] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.830708] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.830884] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.831127] xen:balloon: Initialising balloon driver [ 0.831255] iommu: Default domain type: Translated [ 0.831255] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.831371] SCSI subsystem initialized [ 0.832046] libata version 3.00 loaded. [ 0.832099] ACPI: bus type USB registered [ 0.832246] usbcore: registered new interface driver usbfs [ 0.832366] usbcore: registered new interface driver hub [ 0.832487] usbcore: registered new device driver usb [ 0.832618] pps_core: LinuxPPS API ver. 1 registered [ 0.832955] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.833109] PTP clock support registered [ 0.834228] Advanced Linux Sound Architecture Driver Initialized. [ 0.837059] NetLabel: Initializing [ 0.837424] NetLabel: domain hash size = 128 [ 0.837754] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.838134] NetLabel: unlabeled traffic allowed by default [ 0.838701] PCI: Using ACPI for IRQ routing [ 0.906952] PCI: pci_cache_line_size set to 64 bytes [ 0.907155] e820: reserve RAM buffer [mem 0x00096000-0x0009ffff] [ 0.907163] e820: reserve RAM buffer [mem 0x2006a000-0x23ffffff] [ 0.907265] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.907265] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.907265] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.907953] vgaarb: loaded [ 0.909181] clocksource: Switched to clocksource tsc-early [ 0.909877] VFS: Disk quotas dquot_6.6.0 [ 0.910054] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.910246] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.910408] pnp: PnP ACPI init [ 0.910735] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.911132] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.911626] xen: registering gsi 8 triggering 1 polarity 0 [ 0.911879] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.912252] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.912368] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.912896] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.913020] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.913131] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.913243] system 00:05: [io 0x040b] has been reserved [ 0.913352] system 00:05: [io 0x04d6] has been reserved [ 0.913460] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.913572] system 00:05: [io 0x0c14] has been reserved [ 0.913695] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.913809] system 00:05: [io 0x0c52] has been reserved [ 0.913917] system 00:05: [io 0x0c6c] has been reserved [ 0.914040] system 00:05: [io 0x0c6f] has been reserved [ 0.914147] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.914256] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.914364] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.914472] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.914580] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.914688] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.914796] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.914904] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.915033] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.915142] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.915251] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.915359] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.915471] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.915581] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.915983] xen: registering gsi 4 triggering 1 polarity 0 [ 0.915988] Already setup the GSI :4 [ 0.916089] pnp 00:06: [dma 0 disabled] [ 0.916413] xen: registering gsi 3 triggering 1 polarity 0 [ 0.916420] pnp 00:07: [dma 0 disabled] [ 0.916583] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.917017] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.917206] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.917320] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.917432] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.917544] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.917863] pnp: PnP ACPI: found 10 devices [ 0.942278] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.942496] NET: Registered PF_INET protocol family [ 0.942735] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.943547] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.943973] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.944474] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.944648] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.945058] TCP: Hash tables configured (established 4096 bind 4096) [ 0.945269] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.945391] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.945595] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.946656] RPC: Registered named UNIX socket transport module. [ 0.947093] RPC: Registered udp transport module. [ 0.947200] RPC: Registered tcp transport module. [ 0.947303] RPC: Registered tcp-with-tls transport module. [ 0.947409] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.948299] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.948418] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.948539] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.948669] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.948778] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.948894] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.949065] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.949183] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.949307] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.949469] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.949585] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.949702] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.949814] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.949925] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.950076] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.950183] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.950291] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.950395] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.950511] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.950634] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.950758] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.950881] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.951011] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.951121] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.951229] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.951608] xen: registering gsi 16 triggering 0 polarity 1 [ 0.951712] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.602196] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 635511 usecs [ 1.602429] xen: registering gsi 16 triggering 0 polarity 1 [ 1.602448] Already setup the GSI :16 [ 1.627811] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 24832 usecs [ 1.628184] xen: registering gsi 17 triggering 0 polarity 1 [ 1.628257] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.628436] xen: registering gsi 18 triggering 0 polarity 1 [ 1.628456] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.653209] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 24245 usecs [ 1.653457] xen: registering gsi 18 triggering 0 polarity 1 [ 1.653477] Already setup the GSI :18 [ 1.678229] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 24248 usecs [ 1.678486] xen: registering gsi 19 triggering 0 polarity 1 [ 1.678576] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.678793] xen: registering gsi 18 triggering 0 polarity 1 [ 1.678798] Already setup the GSI :18 [ 1.703209] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 23897 usecs [ 1.703437] PCI: CLS 64 bytes, default 64 [ 1.703606] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.703707] Unpacking initramfs... [ 1.703713] software IO TLB: mapped [mem 0x000000001b200000-0x000000001f200000] (64MB) [ 1.704127] kvm_intel: VMX not supported by CPU 0 [ 1.704238] kvm_amd: SVM not supported by CPU 0 [ 1.704350] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cb3681d801, max_idle_ns: 440795357179 ns [ 1.704618] clocksource: Switched to clocksource tsc [ 1.709114] Initialise system trusted keyrings [ 1.709471] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.710030] NFS: Registering the id_resolver key type [ 1.710152] Key type id_resolver registered [ 1.710255] Key type id_legacy registered [ 1.710469] 9p: Installing v9fs 9p2000 file system support [ 1.746482] Key type asymmetric registered [ 1.746702] Asymmetric key parser 'x509' registered [ 1.746879] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.747036] io scheduler mq-deadline registered [ 1.747141] io scheduler kyber registered [ 1.749639] xen: registering gsi 53 triggering 0 polarity 1 [ 1.749830] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.752405] xen: registering gsi 54 triggering 0 polarity 1 [ 1.752547] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.755650] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.756419] ACPI: button: Power Button [PWRB] [ 1.757267] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.758297] ACPI: button: Power Button [PWRF] [ 1.762254] ACPI: \_PR_.P001: Found 2 idle states [ 1.762882] ACPI: \_PR_.P002: Found 2 idle states [ 1.765400] ACPI: \_PR_.P003: Found 2 idle states [ 1.766602] ACPI: \_PR_.P004: Found 2 idle states [ 1.767595] ACPI: \_PR_.P005: Found 2 idle states [ 1.768436] ACPI: \_PR_.P006: Found 2 idle states [ 1.771282] xen:xen_evtchn: Event-channel device installed [ 1.771535] xen_pciback: backend is vpci [ 1.772757] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.773259] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.774293] hpet_acpi_add: no address or irqs in _CRS [ 1.774477] Non-volatile memory driver v1.3 [ 1.781808] loop: module loaded [ 1.792812] ahci 0000:00:11.0: version 3.0 [ 1.793024] xen: registering gsi 22 triggering 0 polarity 1 [ 1.793121] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.793430] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.793607] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.793719] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.795429] scsi host0: ahci [ 1.796024] scsi host1: ahci [ 1.796550] scsi host2: ahci [ 1.797042] scsi host3: ahci [ 1.797215] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 0 [ 1.797362] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 0 [ 1.797513] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 0 [ 1.797669] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 0 [ 1.799561] tun: Universal TUN/TAP device driver, 1.6 [ 1.799835] e100: Intel(R) PRO/100 Network Driver [ 1.799938] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.800064] sky2: driver version 1.30 [ 1.800227] xen_netfront: Initialising Xen virtual ethernet driver [ 1.801131] xen: registering gsi 16 triggering 0 polarity 1 [ 1.801149] Already setup the GSI :16 [ 1.801342] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.801496] xen: registering gsi 19 triggering 0 polarity 1 [ 1.801501] Already setup the GSI :19 [ 1.801507] xen: registering gsi 17 triggering 0 polarity 1 [ 1.801640] Already setup the GSI :17 [ 1.801713] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.802357] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.857796] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.857979] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.858121] usb usb1: Product: OHCI PCI host controller [ 1.858231] usb usb1: Manufacturer: Linux 6.10.0-rc6 ohci_hcd [ 1.858340] usb usb1: SerialNumber: 0000:00:12.0 [ 1.859683] hub 1-0:1.0: USB hub found [ 1.860340] hub 1-0:1.0: 3 ports detected [ 1.861297] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.861598] xen: registering gsi 16 triggering 0 polarity 1 [ 1.861618] Already setup the GSI :16 [ 1.861791] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.862326] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.863143] ehci-pci 0000:00:13.2: debug port 1 [ 1.864221] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 1.871644] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.872007] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 1.872180] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.872320] usb usb2: Product: EHCI Host Controller [ 1.872425] usb usb2: Manufacturer: Linux 6.10.0-rc6 ehci_hcd [ 1.872557] usb usb2: SerialNumber: 0000:00:13.2 [ 1.873035] hub 2-0:1.0: USB hub found [ 1.873151] hub 2-0:1.0: 6 ports detected [ 1.918136] Freeing initrd memory: 20924K [ 1.926032] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.926493] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3 [ 1.926667] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.926853] ehci-pci 0000:00:12.2: debug port 1 [ 1.927110] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.933545] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.933818] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 1.933964] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.934105] usb usb3: Product: EHCI Host Controller [ 1.934209] usb usb3: Manufacturer: Linux 6.10.0-rc6 ehci_hcd [ 1.934316] usb usb3: SerialNumber: 0000:00:12.2 [ 1.934730] hub 3-0:1.0: USB hub found [ 1.934841] hub 3-0:1.0: 6 ports detected [ 1.986740] hub 1-0:1.0: USB hub found [ 1.986891] hub 1-0:1.0: 3 ports detected [ 1.988037] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.989063] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.989776] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 2.046360] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 2.046577] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.046717] usb usb4: Product: OHCI PCI host controller [ 2.046836] usb usb4: Manufacturer: Linux 6.10.0-rc6 ohci_hcd [ 2.046944] usb usb4: SerialNumber: 0000:00:12.1 [ 2.047385] hub 4-0:1.0: USB hub found [ 2.047499] hub 4-0:1.0: 3 ports detected [ 2.048001] xen: registering gsi 18 triggering 0 polarity 1 [ 2.048016] Already setup the GSI :18 [ 2.048192] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.048461] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 2.048710] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 2.103527] ata4: SATA link down (SStatus 0 SControl 300) [ 2.104067] ata3: SATA link down (SStatus 0 SControl 300) [ 2.104761] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 2.104913] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.105051] usb usb5: Product: OHCI PCI host controller [ 2.105171] usb usb5: Manufacturer: Linux 6.10.0-rc6 ohci_hcd [ 2.105292] usb usb5: SerialNumber: 0000:00:13.0 [ 2.105759] hub 5-0:1.0: USB hub found [ 2.105873] hub 5-0:1.0: 3 ports detected [ 2.106388] xen: registering gsi 18 triggering 0 polarity 1 [ 2.106401] Already setup the GSI :18 [ 2.106625] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 2.106841] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 2.107054] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 2.162719] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 2.162907] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.163048] usb usb6: Product: OHCI PCI host controller [ 2.163155] usb usb6: Manufacturer: Linux 6.10.0-rc6 ohci_hcd [ 2.163305] usb usb6: SerialNumber: 0000:00:13.1 [ 2.163885] hub 6-0:1.0: USB hub found [ 2.164001] hub 6-0:1.0: 3 ports detected [ 2.164727] xen: registering gsi 18 triggering 0 polarity 1 [ 2.164751] Already setup the GSI :18 [ 2.164953] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.165428] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.165659] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 2.222333] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 2.222531] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.222711] usb usb7: Product: OHCI PCI host controller [ 2.222816] usb usb7: Manufacturer: Linux 6.10.0-rc6 ohci_hcd [ 2.222923] usb usb7: SerialNumber: 0000:00:14.5 [ 2.223438] hub 7-0:1.0: USB hub found [ 2.223674] hub 7-0:1.0: 2 ports detected [ 2.224154] usbcore: registered new interface driver usblp [ 2.224288] usbcore: registered new interface driver usb-storage [ 2.224465] i8042: PNP: No PS/2 controller found. [ 2.224578] i8042: Probing ports directly. [ 2.227623] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.227734] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.228113] rtc_cmos 00:02: RTC can wake from S4 [ 2.229215] rtc_cmos 00:02: registered as rtc0 [ 2.230070] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 2.230783] device-mapper: uevent: version 1.0.3 [ 2.231501] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 2.232059] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 2.232714] hid: raw HID events driver (C) Jiri Kosina [ 2.234932] usbcore: registered new interface driver usbhid [ 2.235306] usbhid: USB HID core driver [ 2.237867] Initializing XFRM netlink socket [ 2.238333] NET: Registered PF_INET6 protocol family [ 2.239873] Segment Routing with IPv6 [ 2.240440] In-situ OAM (IOAM) with IPv6 [ 2.241128] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.242417] NET: Registered PF_PACKET protocol family [ 2.243029] 9pnet: Installing 9P2000 support [ 2.243493] Key type dns_resolver registered [ 2.244008] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 2.246049] IPI shorthand broadcast: enabled [ 2.250747] sched_clock: Marking stable (2224004857, 26502201)->(2274416734, -23909676) [ 2.251376] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 2.251899] registered taskstats version 1 [ 2.252003] Loading compiled-in X.509 certificates [ 2.254338] PM: Magic number: 0:884:115 [ 2.256081] printk: legacy console [netcon0] enabled [ 2.256189] netconsole: network logging started [ 2.256477] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.257599] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.257791] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.259123] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 2.259603] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.261029] ata2.00: ATAPI: ATAPI iHAS124 E, 4L07, max UDMA/100 [ 2.261318] ata1.00: configured for UDMA/133 [ 2.261705] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.262029] ata2.00: configured for UDMA/100 [ 2.262807] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.263076] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.263242] sd 0:0:0:0: [sda] Write Protect is off [ 2.263351] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.263405] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.263665] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.264357] scsi 1:0:0:0: CD-ROM ATAPI iHAS124 E 4L07 PQ: 0 ANSI: 5 [ 2.276447] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.276928] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 2.277877] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 2.278071] ALSA device list: [ 2.278172] No soundcards found. [ 2.291876] sda: sda1 sda2 < sda5 > [ 2.292885] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.294653] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.294808] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.306121] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.306564] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.312754] Freeing unused kernel image (initmem) memory: 2680K [ 2.313219] Write protecting the kernel read-only data: 24576k [ 2.409550] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.432627] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 2.554661] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.554789] Run /init as init process [ 2.554885] with arguments: [ 2.554886] /init [ 2.554888] placeholder [ 2.554889] with environment: [ 2.554890] HOME=/ [ 2.554891] TERM=linux [ 2.571664] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.571841] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.571973] usb 6-2: Product: Hermon USB hidmouse Device [ 2.572086] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.578011] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.578350] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.582036] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.633889] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.809869] e1000e: Intel(R) PRO/1000 Network Driver [ 2.810001] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.810235] xen: registering gsi 48 triggering 0 polarity 1 [ 2.810273] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.810524] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.853393] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.897384] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0a:48:f6 [ 2.897546] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.897733] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 2.897936] xen: registering gsi 47 triggering 0 polarity 1 [ 2.897963] xen: --> pirq=47 -> irq=47 (gsi=47) [ 2.898144] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.945631] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.992590] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0a:48:f7 [ 2.992739] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.992927] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 2.994873] e1000e 0000:01:00.0 enx0cc47a0a48f6: renamed from eth0 [ 2.995475] e1000e 0000:02:00.0 enx0cc47a0a48f7: renamed from eth1 [ 3.092535] random: crng init done [ 3.716952] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.722020] EXT4-fs (dm-0): mounted filesystem df55e0f1-b786-4cc0-a1e3-8042015ea18c ro with ordered data mode. Quota mode: none. [ 7.388908] EXT4-fs (dm-0): re-mounted df55e0f1-b786-4cc0-a1e3-8042015ea18c r/w. Quota mode: none. [ 8.684748] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 8.709907] EXT4-fs (sda1): mounted filesystem fab6a645-1039-4694-a5d5-68e9a20801bd r/w with ordered data mode. Quota mode: none. [ 8.785773] Adding 1949692k swap on /dev/mapper/rimava1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 10.325761] xenbr0: port 1(enx0cc47a0a48f6) entered blocking state [ 10.325900] xenbr0: port 1(enx0cc47a0a48f6) entered disabled state [ 10.326027] e1000e 0000:01:00.0 enx0cc47a0a48f6: entered allmulticast mode [ 10.326183] e1000e 0000:01:00.0 enx0cc47a0a48f6: entered promiscuous mode [ 13.457559] e1000e 0000:01:00.0 enx0cc47a0a48f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 13.458063] xenbr0: port 1(enx0cc47a0a48f6) entered blocking state [ 13.458172] xenbr0: port 1(enx0cc47a0a48f6) entered forwarding state