[ 0.000000] Linux version 6.10.0-rc6+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Mon Jul 1 17:55:39 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/pinot0--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000f6000000-0x00000000f6003fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SML/H8SML, BIOS 3.5 11/25/2013 [ 0.000000] DMI: Memory slots populated: 2/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000012] Xen PV: Detected 4 vCPUS [ 0.038657] tsc: Fast TSC calibration using PIT [ 0.038659] tsc: Detected 2799.905 MHz processor [ 0.038660] tsc: Detected 2799.992 MHz TSC [ 0.038881] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.038886] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.038893] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.038897] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.038899] MTRRs set to read-only [ 0.038902] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.065010] RAMDISK: [mem 0x04000000-0x0546efff] [ 0.065031] ACPI: Early table checksum verification disabled [ 0.066125] ACPI: RSDP 0x00000000000FA1C0 000024 (v02 ACPIAM) [ 0.066136] ACPI: XSDT 0x00000000DFEA0100 00007C (v01 SMCI 20131125 MSFT 00000097) [ 0.066170] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.066220] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20240322/tbfadt-560) [ 0.066232] ACPI: DSDT 0x00000000DFEA0600 00562B (v01 1CF11 1CF11000 00000000 INTL 20051117) [ 0.066243] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.066253] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.066263] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.066274] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.066285] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.066296] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.066307] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.066318] ACPI: SSDT 0x00000000DFEAA6F0 000B9C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.066328] ACPI: EINJ 0x00000000DFEAB290 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.066339] ACPI: BERT 0x00000000DFEAB420 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.066350] ACPI: ERST 0x00000000DFEAB450 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.066361] ACPI: HEST 0x00000000DFEAB660 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.066366] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.066368] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c2a] [ 0.066370] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.066371] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.066373] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.066374] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.066375] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.066377] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.066378] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.066379] ACPI: Reserving SSDT table memory at [mem 0xdfeaa6f0-0xdfeab28b] [ 0.066380] ACPI: Reserving EINJ table memory at [mem 0xdfeab290-0xdfeab3bf] [ 0.066382] ACPI: Reserving BERT table memory at [mem 0xdfeab420-0xdfeab44f] [ 0.066383] ACPI: Reserving ERST table memory at [mem 0xdfeab450-0xdfeab65f] [ 0.066384] ACPI: Reserving HEST table memory at [mem 0xdfeab660-0xdfeab707] [ 0.066501] APIC: Switched APIC routing to: Xen PV [ 0.068861] Zone ranges: [ 0.068863] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.068865] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.068868] Normal empty [ 0.068869] Movable zone start for each node [ 0.068870] Early memory node ranges [ 0.068871] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.068873] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.068875] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.068886] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.068981] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.073002] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.073014] p2m virtual area at (____ptrval____), size is 40000000 [ 0.293365] Remapped 102 page(s) [ 0.293902] ACPI: PM-Timer IO Port: 0x808 [ 0.293936] CPU topo: CPU limit of 4 reached. Ignoring further CPUs [ 0.293968] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.293972] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.293994] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.294003] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.294014] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.294019] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.294041] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.294045] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.294059] CPU topo: Max. logical packages: 1 [ 0.294060] CPU topo: Max. logical dies: 1 [ 0.294061] CPU topo: Max. dies per package: 1 [ 0.294067] CPU topo: Max. threads per core: 1 [ 0.294069] CPU topo: Num. cores per package: 4 [ 0.294070] CPU topo: Num. threads per package: 4 [ 0.294071] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.294072] CPU topo: Rejected CPUs 4 [ 0.294091] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.294094] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.294095] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.294098] [mem 0x20066000-0xdfe9dfff] available for PCI devices [ 0.294102] Booting kernel on Xen [ 0.294104] Xen version: 4.19-unstable (preserve-AD) [ 0.294109] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.300548] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.301473] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u524288 [ 0.301482] pcpu-alloc: s194408 r8192 d30872 u524288 alloc=1*2097152 [ 0.301487] pcpu-alloc: [0] 0 1 2 3 [ 0.301563] xen: PV spinlocks enabled [ 0.301568] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.301572] Kernel command line: placeholder root=/dev/mapper/pinot0--vg-root ro console=hvc0 [ 0.301650] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.301858] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.301953] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.302165] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.302170] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.302173] software IO TLB: area num 4. [ 0.408354] Memory: 385712K/524284K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 138320K reserved, 0K cma-reserved) [ 0.408480] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.411286] Dynamic Preempt: voluntary [ 0.411403] rcu: Preemptible hierarchical RCU implementation. [ 0.411405] rcu: RCU event tracing is enabled. [ 0.411406] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.411408] Trampoline variant of Tasks RCU enabled. [ 0.411409] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.411411] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.411430] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.418291] NR_IRQS: 4352, nr_irqs: 1000, preallocated irqs: 16 [ 0.418447] xen:events: Using FIFO-based ABI [ 0.418476] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.418488] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.418494] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.418500] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.418505] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.418511] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.418516] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.418522] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.418527] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.418532] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.418538] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.418543] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.418549] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.418554] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.418560] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.418573] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.424683] Console: colour VGA+ 80x25 [ 0.424688] printk: legacy console [tty0] enabled [ 0.438466] printk: legacy console [hvc0] enabled [ 0.439135] ACPI: Core revision 20240322 [ 0.443080] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.443260] Xen: using vcpuop timer interface [ 0.443266] installing Xen timer for CPU 0 [ 0.443507] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c3953c26, max_idle_ns: 440795321272 ns [ 0.443666] Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.98 BogoMIPS (lpj=2799992) [ 0.443860] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.444104] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.444213] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.444327] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.444676] Spectre V2 : Mitigation: Retpolines [ 0.444779] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.444923] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.445033] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.445143] RETBleed: Mitigation: untrained return thunk [ 0.445249] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.445393] Speculative Store Bypass: Vulnerable [ 0.445517] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.445668] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.445803] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.445913] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.446022] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.471468] Freeing SMP alternatives memory: 40K [ 0.471607] pid_max: default: 32768 minimum: 301 [ 0.471705] LSM: initializing lsm=capability,selinux [ 0.471854] SELinux: Initializing. [ 0.472008] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.472153] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.472798] cpu 0 spinlock event irq 57 [ 0.472912] VPMU disabled by hypervisor. [ 0.473411] Performance Events: PMU not available due to virtualization, using software events only. [ 0.473572] signal: max sigframe size: 1776 [ 0.473730] rcu: Hierarchical SRCU implementation. [ 0.473835] rcu: Max phase no-delay instances is 400. [ 0.479896] smp: Bringing up secondary CPUs ... [ 0.480219] installing Xen timer for CPU 1 [ 0.480648] installing Xen timer for CPU 2 [ 0.480945] installing Xen timer for CPU 3 [ 0.026085] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0011 [ 0.481150] cpu 1 spinlock event irq 77 [ 0.026085] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0012 [ 0.481863] cpu 2 spinlock event irq 78 [ 0.026085] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0013 [ 0.482743] cpu 3 spinlock event irq 79 [ 0.483811] smp: Brought up 1 node, 4 CPUs [ 0.484957] devtmpfs: initialized [ 0.484967] x86/mm: Memory block size: 128MB [ 0.485818] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.485931] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.485931] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.485941] PM: RTC time: 18:55:18, date: 2024-07-01 [ 0.486282] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.486458] xen:grant_table: Grant tables using version 1 layout [ 0.486588] Grant table initialized [ 0.486910] audit: initializing netlink subsys (disabled) [ 0.487729] audit: type=2000 audit(1719860118.378:1): state=initialized audit_enabled=0 res=1 [ 0.488154] thermal_sys: Registered thermal governor 'step_wise' [ 0.488170] thermal_sys: Registered thermal governor 'user_space' [ 0.490600] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.492075] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.838055] PCI: Using configuration type 1 for base access [ 0.838919] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.840751] ACPI: Added _OSI(Module Device) [ 0.840829] ACPI: Added _OSI(Processor Device) [ 0.840970] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.841074] ACPI: Added _OSI(Processor Aggregator Device) [ 0.846903] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.847464] xen: registering gsi 9 triggering 0 polarity 1 [ 0.852935] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.853716] ACPI: Interpreter enabled [ 0.853846] ACPI: PM: (supports S0 S1 S4 S5) [ 0.853977] ACPI: Using IOAPIC for interrupt routing [ 0.854172] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.854322] PCI: Using E820 reservations for host bridge windows [ 0.854599] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.866677] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.866798] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.866951] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.867069] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.867259] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.867744] PCI host bridge to bus 0000:00 [ 0.867850] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.867962] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.868074] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.868248] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.868397] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.868606] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.868718] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.869296] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.869878] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.870092] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.870242] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.870360] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.870556] pci 0000:00:09.0: enabling Extended Tags [ 0.870807] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.871140] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.871385] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.871536] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.871653] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.871718] pci 0000:00:0a.0: enabling Extended Tags [ 0.871970] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.872361] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f conventional PCI endpoint [ 0.872583] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.872691] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.872819] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.872947] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.873103] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.873264] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.873432] pci 0000:00:11.0: set SATA to AHCI mode [ 0.873827] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.874017] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.874442] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.874667] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.875127] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.875349] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.875743] pci 0000:00:12.2: supports D1 D2 [ 0.875847] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.876124] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.876314] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.876799] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.876989] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.877429] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.877618] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.877919] pci 0000:00:13.2: supports D1 D2 [ 0.878023] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.878346] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.878872] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.879083] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.879213] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.879347] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.879475] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.879602] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.879724] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.879837] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.879946] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.880057] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.880449] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.880985] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.881218] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.881396] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.881521] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.881880] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.882072] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.882509] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.882913] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.883269] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.883626] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.883881] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.884195] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.884751] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.884971] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.885135] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.885268] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.885691] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.888708] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.889040] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.889235] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.889400] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.889566] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.889972] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.892708] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.892911] pci_bus 0000:03: extended config space not accessible [ 0.893085] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.893301] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.893437] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.893571] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.893871] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.894289] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.894447] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.894624] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.894671] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.894821] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.895008] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.895286] pci_bus 0000:00: on NUMA node 0 [ 0.895861] xen: registering gsi 13 triggering 1 polarity 0 [ 0.896438] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.896625] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.896744] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.896926] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.897111] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.897334] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.897519] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.897716] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.897969] xen:balloon: Initialising balloon driver [ 0.898131] iommu: Default domain type: Translated [ 0.898131] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.898789] SCSI subsystem initialized [ 0.898949] libata version 3.00 loaded. [ 0.898949] ACPI: bus type USB registered [ 0.898949] usbcore: registered new interface driver usbfs [ 0.898989] usbcore: registered new interface driver hub [ 0.899111] usbcore: registered new device driver usb [ 0.899793] pps_core: LinuxPPS API ver. 1 registered [ 0.899928] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.900085] PTP clock support registered [ 0.900220] Advanced Linux Sound Architecture Driver Initialized. [ 0.900930] NetLabel: Initializing [ 0.901061] NetLabel: domain hash size = 128 [ 0.901168] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.901308] NetLabel: unlabeled traffic allowed by default [ 0.901702] PCI: Using ACPI for IRQ routing [ 0.931782] PCI: pci_cache_line_size set to 64 bytes [ 0.932021] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.932026] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.932051] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.932051] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.932051] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.932106] vgaarb: loaded [ 0.933455] clocksource: Switched to clocksource tsc-early [ 0.933577] VFS: Disk quotas dquot_6.6.0 [ 0.933577] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.933577] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.933577] pnp: PnP ACPI init [ 0.933812] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.933888] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.933888] xen: registering gsi 8 triggering 1 polarity 0 [ 0.934865] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.935189] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.935309] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.935842] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.935960] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.936077] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.936193] system 00:05: [io 0x040b] has been reserved [ 0.936307] system 00:05: [io 0x04d6] has been reserved [ 0.936419] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.936534] system 00:05: [io 0x0c14] has been reserved [ 0.936689] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.936804] system 00:05: [io 0x0c52] has been reserved [ 0.936916] system 00:05: [io 0x0c6c] has been reserved [ 0.937028] system 00:05: [io 0x0c6f] has been reserved [ 0.937139] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.937255] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.937370] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.937485] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.937600] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.937723] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.937864] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.937981] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.938110] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.938225] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.938341] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.938456] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.938575] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.938729] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.939143] xen: registering gsi 4 triggering 1 polarity 0 [ 0.939148] Already setup the GSI :4 [ 0.939254] pnp 00:06: [dma 0 disabled] [ 0.939585] xen: registering gsi 3 triggering 1 polarity 0 [ 0.939597] pnp 00:07: [dma 0 disabled] [ 0.939784] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.940192] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.940414] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.940534] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.940653] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.940819] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.941113] pnp: PnP ACPI: found 10 devices [ 0.963923] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.964108] NET: Registered PF_INET protocol family [ 0.964345] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.964810] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.964967] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.965119] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.965283] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.965479] TCP: Hash tables configured (established 4096 bind 4096) [ 0.965644] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.965813] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.966004] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.966386] RPC: Registered named UNIX socket transport module. [ 0.966532] RPC: Registered udp transport module. [ 0.966641] RPC: Registered tcp transport module. [ 0.966768] RPC: Registered tcp-with-tls transport module. [ 0.966880] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.967631] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.967763] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.967891] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.968030] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.968145] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.968271] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.968475] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.968598] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.968732] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.968899] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.969015] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.969131] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.969249] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.969367] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.969485] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.969598] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.969740] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.969891] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.970007] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.970123] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.970240] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.970356] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.970472] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.970590] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.970715] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.971068] xen: registering gsi 16 triggering 0 polarity 1 [ 0.971111] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.633877] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 647379 usecs [ 1.634137] xen: registering gsi 16 triggering 0 polarity 1 [ 1.634148] Already setup the GSI :16 [ 1.659880] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 25200 usecs [ 1.660145] xen: registering gsi 17 triggering 0 polarity 1 [ 1.660212] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.660417] xen: registering gsi 18 triggering 0 polarity 1 [ 1.660443] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.683878] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 22967 usecs [ 1.684149] xen: registering gsi 18 triggering 0 polarity 1 [ 1.684161] Already setup the GSI :18 [ 1.709883] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 25192 usecs [ 1.710151] xen: registering gsi 19 triggering 0 polarity 1 [ 1.710210] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.710439] xen: registering gsi 18 triggering 0 polarity 1 [ 1.710443] Already setup the GSI :18 [ 1.735115] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 24154 usecs [ 1.735729] PCI: CLS 64 bytes, default 64 [ 1.735886] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.735999] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 1.736218] kvm_intel: VMX not supported by CPU 1 [ 1.736322] kvm_amd: SVM not supported by CPU 1 [ 1.736430] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c3953c26, max_idle_ns: 440795321272 ns [ 1.738016] clocksource: Switched to clocksource tsc [ 1.738132] Unpacking initramfs... [ 1.796611] Initialise system trusted keyrings [ 1.797018] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.797468] NFS: Registering the id_resolver key type [ 1.797608] Key type id_resolver registered [ 1.797717] Key type id_legacy registered [ 1.797987] 9p: Installing v9fs 9p2000 file system support [ 1.829285] Key type asymmetric registered [ 1.829666] Asymmetric key parser 'x509' registered [ 1.830083] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.830592] io scheduler mq-deadline registered [ 1.830935] io scheduler kyber registered [ 1.832725] xen: registering gsi 53 triggering 0 polarity 1 [ 1.832872] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.834699] xen: registering gsi 54 triggering 0 polarity 1 [ 1.834828] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.836993] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.837566] ACPI: button: Power Button [PWRB] [ 1.838223] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.838978] ACPI: button: Power Button [PWRF] [ 1.841944] ACPI: \_PR_.P001: Found 2 idle states [ 1.842189] ACPI: \_PR_.P002: Found 2 idle states [ 1.842351] ACPI: \_PR_.P003: Found 2 idle states [ 1.842520] ACPI: \_PR_.P004: Found 2 idle states [ 1.843579] xen:xen_evtchn: Event-channel device installed [ 1.844362] xen_pciback: backend is vpci [ 1.846183] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.846616] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.849099] hpet_acpi_add: no address or irqs in _CRS [ 1.849305] Non-volatile memory driver v1.3 [ 1.852263] loop: module loaded [ 1.868722] ahci 0000:00:11.0: version 3.0 [ 1.868881] xen: registering gsi 22 triggering 0 polarity 1 [ 1.868929] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.869139] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.869310] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.869434] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.871135] scsi host0: ahci [ 1.871521] scsi host1: ahci [ 1.872072] scsi host2: ahci [ 1.872575] scsi host3: ahci [ 1.872759] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 0 [ 1.872917] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 0 [ 1.873078] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 0 [ 1.873244] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 0 [ 1.873963] tun: Universal TUN/TAP device driver, 1.6 [ 1.874393] e100: Intel(R) PRO/100 Network Driver [ 1.874504] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.874637] sky2: driver version 1.30 [ 1.874828] xen_netfront: Initialising Xen virtual ethernet driver [ 1.875340] xen: registering gsi 16 triggering 0 polarity 1 [ 1.875352] Already setup the GSI :16 [ 1.875523] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.875749] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.875846] xen: registering gsi 17 triggering 0 polarity 1 [ 1.875927] Already setup the GSI :17 [ 1.876018] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.877319] xen: registering gsi 19 triggering 0 polarity 1 [ 1.877342] Already setup the GSI :19 [ 1.932832] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.933357] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.933778] usb usb1: Product: OHCI PCI host controller [ 1.934156] usb usb1: Manufacturer: Linux 6.10.0-rc6+ ohci_hcd [ 1.934489] usb usb1: SerialNumber: 0000:00:12.0 [ 1.935823] hub 1-0:1.0: USB hub found [ 1.936383] hub 1-0:1.0: 3 ports detected [ 1.938370] xen: registering gsi 16 triggering 0 polarity 1 [ 1.938382] Already setup the GSI :16 [ 1.938434] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.939025] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2 [ 1.939213] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.939394] ehci-pci 0000:00:12.2: debug port 1 [ 1.939655] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.946176] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.946953] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 1.947229] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.947393] usb usb2: Product: EHCI Host Controller [ 1.947497] usb usb2: Manufacturer: Linux 6.10.0-rc6+ ehci_hcd [ 1.947605] usb usb2: SerialNumber: 0000:00:12.2 [ 1.947986] hub 2-0:1.0: USB hub found [ 1.948126] hub 2-0:1.0: 6 ports detected [ 1.970013] Freeing initrd memory: 20924K [ 2.001607] hub 1-0:1.0: USB hub found [ 2.002060] hub 1-0:1.0: 3 ports detected [ 2.002924] ehci-pci 0000:00:13.2: EHCI Host Controller [ 2.003250] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 2.003401] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.003572] ehci-pci 0000:00:13.2: debug port 1 [ 2.003806] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 2.010142] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.010759] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 2.010925] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.011130] usb usb3: Product: EHCI Host Controller [ 2.011239] usb usb3: Manufacturer: Linux 6.10.0-rc6+ ehci_hcd [ 2.011346] usb usb3: SerialNumber: 0000:00:13.2 [ 2.011879] hub 3-0:1.0: USB hub found [ 2.011992] hub 3-0:1.0: 6 ports detected [ 2.012825] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 2.013483] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 2.013982] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 2.070375] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 2.070538] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.070680] usb usb4: Product: OHCI PCI host controller [ 2.070798] usb usb4: Manufacturer: Linux 6.10.0-rc6+ ohci_hcd [ 2.070904] usb usb4: SerialNumber: 0000:00:12.1 [ 2.071290] hub 4-0:1.0: USB hub found [ 2.071433] hub 4-0:1.0: 3 ports detected [ 2.071948] xen: registering gsi 18 triggering 0 polarity 1 [ 2.071956] Already setup the GSI :18 [ 2.072196] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.072412] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 2.072623] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 2.128396] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 2.128549] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.128688] usb usb5: Product: OHCI PCI host controller [ 2.128792] usb usb5: Manufacturer: Linux 6.10.0-rc6+ ohci_hcd [ 2.128968] usb usb5: SerialNumber: 0000:00:13.0 [ 2.129282] hub 5-0:1.0: USB hub found [ 2.129418] hub 5-0:1.0: 3 ports detected [ 2.129866] xen: registering gsi 18 triggering 0 polarity 1 [ 2.129872] Already setup the GSI :18 [ 2.130006] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 2.130226] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 2.130407] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 2.185142] ata3: SATA link down (SStatus 0 SControl 300) [ 2.185292] ata4: SATA link down (SStatus 0 SControl 300) [ 2.186334] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 2.186484] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.186643] usb usb6: Product: OHCI PCI host controller [ 2.186750] usb usb6: Manufacturer: Linux 6.10.0-rc6+ ohci_hcd [ 2.186857] usb usb6: SerialNumber: 0000:00:13.1 [ 2.187286] hub 6-0:1.0: USB hub found [ 2.187453] hub 6-0:1.0: 3 ports detected [ 2.188010] xen: registering gsi 18 triggering 0 polarity 1 [ 2.188017] Already setup the GSI :18 [ 2.188171] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.188358] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.188568] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 2.244423] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 2.244575] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.244715] usb usb7: Product: OHCI PCI host controller [ 2.244819] usb usb7: Manufacturer: Linux 6.10.0-rc6+ ohci_hcd [ 2.244925] usb usb7: SerialNumber: 0000:00:14.5 [ 2.245272] hub 7-0:1.0: USB hub found [ 2.245446] hub 7-0:1.0: 2 ports detected [ 2.245841] usbcore: registered new interface driver usblp [ 2.245971] usbcore: registered new interface driver usb-storage [ 2.246130] i8042: PNP: No PS/2 controller found. [ 2.246259] i8042: Probing ports directly. [ 2.249238] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.249351] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.249696] rtc_cmos 00:02: RTC can wake from S4 [ 2.250280] rtc_cmos 00:02: registered as rtc0 [ 2.250424] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 2.250580] device-mapper: uevent: version 1.0.3 [ 2.250768] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 2.250920] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 2.251120] hid: raw HID events driver (C) Jiri Kosina [ 2.251438] usbcore: registered new interface driver usbhid [ 2.251543] usbhid: USB HID core driver [ 2.252038] Initializing XFRM netlink socket [ 2.252193] NET: Registered PF_INET6 protocol family [ 2.252944] Segment Routing with IPv6 [ 2.253059] In-situ OAM (IOAM) with IPv6 [ 2.253244] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.253506] NET: Registered PF_PACKET protocol family [ 2.253638] 9pnet: Installing 9P2000 support [ 2.253794] Key type dns_resolver registered [ 2.253910] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 2.254508] IPI shorthand broadcast: enabled [ 2.258979] sched_clock: Marking stable (2233018944, 25085315)->(2281435823, -23331564) [ 2.259468] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 2.259794] registered taskstats version 1 [ 2.259895] Loading compiled-in X.509 certificates [ 2.262117] PM: Magic number: 0:880:947 [ 2.262264] cpuid cpu2: hash matches [ 2.262368] tty tty4: hash matches [ 2.262484] processor cpu2: hash matches [ 2.262583] memory memory0: hash matches [ 2.262690] printk: legacy console [netcon0] enabled [ 2.262797] netconsole: network logging started [ 2.263015] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.273487] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.275415] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 2.276228] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 2.276402] ALSA device list: [ 2.276522] No soundcards found. [ 2.339150] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.339292] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.339841] ata2.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133 [ 2.340352] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.341022] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 2.341370] ata2.00: configured for UDMA/133 [ 2.341642] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.343526] ata1.00: configured for UDMA/133 [ 2.343762] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.344379] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.344503] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.344710] sd 0:0:0:0: [sda] Write Protect is off [ 2.344825] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.344905] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.344908] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5 [ 2.345149] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.346073] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.346106] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.346371] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 2.346554] sd 1:0:0:0: [sdb] Write Protect is off [ 2.346702] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.346759] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.346997] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 2.370842] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.374331] sda: sda1 sda2 < sda5 > [ 2.374768] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.376403] Freeing unused kernel image (initmem) memory: 2680K [ 2.376538] Write protecting the kernel read-only data: 24576k [ 2.389547] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 2.504142] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.504259] Run /init as init process [ 2.504357] with arguments: [ 2.504359] /init [ 2.504360] placeholder [ 2.504362] with environment: [ 2.504363] HOME=/ [ 2.504364] TERM=linux [ 2.507124] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.671258] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.671424] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.671537] usb 6-2: Product: Hermon USB hidmouse Device [ 2.671643] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.677646] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.678242] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.681808] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.733727] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.770180] e1000e: Intel(R) PRO/1000 Network Driver [ 2.770332] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.770557] xen: registering gsi 48 triggering 0 polarity 1 [ 2.770598] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.770835] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.815196] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.858975] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e8:ac [ 2.859136] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.859327] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.859560] xen: registering gsi 47 triggering 0 polarity 1 [ 2.859587] xen: --> pirq=47 -> irq=47 (gsi=47) [ 2.859777] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.907166] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.952095] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e8:ad [ 2.952272] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.952462] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.954614] e1000e 0000:02:00.0 enx002590aee8ad: renamed from eth1 [ 2.954932] e1000e 0000:01:00.0 enx002590aee8ac: renamed from eth0 [ 2.956108] random: crng init done [ 3.654694] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.661304] EXT4-fs (dm-0): mounted filesystem 71f07592-9469-42ca-a2b9-d398087d2ce4 ro with ordered data mode. Quota mode: none. [ 7.973795] EXT4-fs (dm-0): re-mounted 71f07592-9469-42ca-a2b9-d398087d2ce4 r/w. Quota mode: none. [ 9.568716] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.589977] EXT4-fs (sda1): mounted filesystem dbeefdf1-b1bf-4e87-a014-d89180a4ae4d r/w with ordered data mode. Quota mode: none. [ 9.661704] Adding 1949692k swap on /dev/mapper/pinot0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.276405] xenbr0: port 1(enx002590aee8ac) entered blocking state [ 11.276581] xenbr0: port 1(enx002590aee8ac) entered disabled state [ 11.276699] e1000e 0000:01:00.0 enx002590aee8ac: entered allmulticast mode [ 11.276857] e1000e 0000:01:00.0 enx002590aee8ac: entered promiscuous mode [ 14.450160] e1000e 0000:01:00.0 enx002590aee8ac: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 14.450720] xenbr0: port 1(enx002590aee8ac) entered blocking state [ 14.450831] xenbr0: port 1(enx002590aee8ac) entered forwarding state