[ 0.000000] Linux version 6.10.0-rc6+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Mon Jul 1 17:55:39 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/rimava0--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000095fff] usable [ 0.000000] Xen: [mem 0x0000000000096000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020069fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SCM/H8SCM, BIOS 3.5 11/25/2013 [ 0.000000] DMI: Memory slots populated: 1/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000015] Xen PV: Detected 6 vCPUS [ 0.038020] tsc: Fast TSC calibration using PIT [ 0.038021] tsc: Detected 3101.475 MHz processor [ 0.038023] tsc: Detected 3101.122 MHz TSC [ 0.038235] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.038238] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.038245] last_pfn = 0x2006a max_arch_pfn = 0x400000000 [ 0.038248] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.038250] MTRRs set to read-only [ 0.038252] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.063091] RAMDISK: [mem 0x04000000-0x0546efff] [ 0.063122] ACPI: Early table checksum verification disabled [ 0.064600] ACPI: RSDP 0x00000000000FA1D0 000024 (v02 ACPIAM) [ 0.064618] ACPI: XSDT 0x00000000DFEA0100 000084 (v01 SMCI 20131125 MSFT 00000097) [ 0.064661] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.064723] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20240322/tbfadt-560) [ 0.064738] ACPI: DSDT 0x00000000DFEA0600 005699 (v01 1BA11 1BA11000 00000000 INTL 20051117) [ 0.064749] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.064759] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.064771] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.064782] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.064794] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.064805] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.064817] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.064829] ACPI: SRAT 0x00000000DFEAA6F0 000108 (v02 AMD AGESA 00000001 AMD 00000001) [ 0.064840] ACPI: SSDT 0x00000000DFEAA800 001158 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.064850] ACPI: EINJ 0x00000000DFEAB960 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.064862] ACPI: BERT 0x00000000DFEABAF0 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.064874] ACPI: ERST 0x00000000DFEABB20 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.064886] ACPI: HEST 0x00000000DFEABD30 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.064891] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.064893] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c98] [ 0.064894] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.064896] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.064897] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.064898] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.064899] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.064900] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.064902] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.064903] ACPI: Reserving SRAT table memory at [mem 0xdfeaa6f0-0xdfeaa7f7] [ 0.064904] ACPI: Reserving SSDT table memory at [mem 0xdfeaa800-0xdfeab957] [ 0.064905] ACPI: Reserving EINJ table memory at [mem 0xdfeab960-0xdfeaba8f] [ 0.064907] ACPI: Reserving BERT table memory at [mem 0xdfeabaf0-0xdfeabb1f] [ 0.064908] ACPI: Reserving ERST table memory at [mem 0xdfeabb20-0xdfeabd2f] [ 0.064909] ACPI: Reserving HEST table memory at [mem 0xdfeabd30-0xdfeabdd7] [ 0.065051] APIC: Switched APIC routing to: Xen PV [ 0.067440] Zone ranges: [ 0.067442] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.067445] DMA32 [mem 0x0000000001000000-0x0000000020069fff] [ 0.067447] Normal empty [ 0.067449] Movable zone start for each node [ 0.067450] Early memory node ranges [ 0.067451] node 0: [mem 0x0000000000001000-0x0000000000095fff] [ 0.067454] node 0: [mem 0x0000000000100000-0x0000000020069fff] [ 0.067456] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020069fff] [ 0.067472] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.067607] On node 0, zone DMA: 106 pages in unavailable ranges [ 0.073201] On node 0, zone DMA32: 32662 pages in unavailable ranges [ 0.073223] p2m virtual area at (____ptrval____), size is 40000000 [ 0.280855] Remapped 106 page(s) [ 0.281397] ACPI: PM-Timer IO Port: 0x808 [ 0.281440] CPU topo: CPU limit of 6 reached. Ignoring further CPUs [ 0.281474] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.281480] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.281509] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.281518] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.281531] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.281537] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.281563] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.281568] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.281583] CPU topo: Max. logical packages: 1 [ 0.281585] CPU topo: Max. logical dies: 1 [ 0.281586] CPU topo: Max. dies per package: 1 [ 0.281594] CPU topo: Max. threads per core: 1 [ 0.281596] CPU topo: Num. cores per package: 6 [ 0.281597] CPU topo: Num. threads per package: 6 [ 0.281598] CPU topo: Allowing 6 present CPUs plus 0 hotplug CPUs [ 0.281599] CPU topo: Rejected CPUs 2 [ 0.281619] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.281622] PM: hibernation: Registered nosave memory: [mem 0x00096000-0x000fffff] [ 0.281625] [mem 0x2006a000-0xdfe9dfff] available for PCI devices [ 0.281642] Booting kernel on Xen [ 0.281643] Xen version: 4.19-unstable (preserve-AD) [ 0.281651] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.288083] setup_percpu: NR_CPUS:64 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1 [ 0.289417] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u262144 [ 0.289428] pcpu-alloc: s194408 r8192 d30872 u262144 alloc=1*2097152 [ 0.289435] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.289534] xen: PV spinlocks enabled [ 0.289539] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.289543] Kernel command line: placeholder root=/dev/mapper/rimava0--vg-root ro console=hvc0 [ 0.289641] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.289710] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.289837] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.290118] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.290124] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.290128] software IO TLB: area num 8. [ 0.429965] Memory: 385256K/524284K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 138776K reserved, 0K cma-reserved) [ 0.430123] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.433335] Dynamic Preempt: voluntary [ 0.433486] rcu: Preemptible hierarchical RCU implementation. [ 0.433487] rcu: RCU event tracing is enabled. [ 0.433488] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.433491] Trampoline variant of Tasks RCU enabled. [ 0.433492] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.433494] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.433521] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.440291] NR_IRQS: 4352, nr_irqs: 1016, preallocated irqs: 16 [ 0.440482] xen:events: Using FIFO-based ABI [ 0.440538] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.440544] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.440550] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.440559] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.440564] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.440570] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.440575] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.440581] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.440586] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.440592] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.440597] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.440603] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.440609] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.440615] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.440620] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.440635] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.446696] Console: colour VGA+ 80x25 [ 0.446701] printk: legacy console [tty0] enabled [ 0.460198] printk: legacy console [hvc0] enabled [ 0.460871] ACPI: Core revision 20240322 [ 0.466591] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.466748] Xen: using vcpuop timer interface [ 0.466754] installing Xen timer for CPU 0 [ 0.467011] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cb36b87b28, max_idle_ns: 440795230167 ns [ 0.467170] Calibrating delay loop (skipped), value calculated using timer frequency.. 6202.24 BogoMIPS (lpj=3101122) [ 0.467390] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.467607] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.467717] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.467833] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.468184] Spectre V2 : Mitigation: Retpolines [ 0.468287] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.468429] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.468539] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.468648] RETBleed: Mitigation: untrained return thunk [ 0.468758] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.468917] Speculative Store Bypass: Vulnerable [ 0.469048] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.469174] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.469282] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.469393] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.469502] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.497449] Freeing SMP alternatives memory: 40K [ 0.497622] pid_max: default: 32768 minimum: 301 [ 0.497803] LSM: initializing lsm=capability,selinux [ 0.497926] SELinux: Initializing. [ 0.498096] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.498177] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.499311] cpu 0 spinlock event irq 57 [ 0.499425] VPMU disabled by hypervisor. [ 0.499923] Performance Events: PMU not available due to virtualization, using software events only. [ 0.500083] signal: max sigframe size: 1776 [ 0.500243] rcu: Hierarchical SRCU implementation. [ 0.500354] rcu: Max phase no-delay instances is 400. [ 0.506673] smp: Bringing up secondary CPUs ... [ 0.507023] installing Xen timer for CPU 1 [ 0.507469] installing Xen timer for CPU 2 [ 0.508826] installing Xen timer for CPU 3 [ 0.510991] installing Xen timer for CPU 4 [ 0.513277] installing Xen timer for CPU 5 [ 0.027525] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0011 [ 0.514284] cpu 1 spinlock event irq 87 [ 0.027525] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0012 [ 0.514492] cpu 2 spinlock event irq 88 [ 0.027525] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0013 [ 0.516408] cpu 3 spinlock event irq 89 [ 0.027525] [Firmware Bug]: CPU 4: APIC ID mismatch. CPUID: 0x0004 APIC: 0x0014 [ 0.517229] cpu 4 spinlock event irq 90 [ 0.027525] [Firmware Bug]: CPU 5: APIC ID mismatch. CPUID: 0x0005 APIC: 0x0015 [ 0.518463] cpu 5 spinlock event irq 91 [ 0.519373] smp: Brought up 1 node, 6 CPUs [ 0.520287] devtmpfs: initialized [ 0.520958] x86/mm: Memory block size: 128MB [ 0.526499] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.527722] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.528213] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.529195] PM: RTC time: 18:25:14, date: 2024-07-01 [ 0.530548] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.531071] xen:grant_table: Grant tables using version 1 layout [ 0.531508] Grant table initialized [ 0.534513] audit: initializing netlink subsys (disabled) [ 0.535337] audit: type=2000 audit(1719858314.880:1): state=initialized audit_enabled=0 res=1 [ 0.535397] thermal_sys: Registered thermal governor 'step_wise' [ 0.535397] thermal_sys: Registered thermal governor 'user_space' [ 0.536529] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.537322] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.617926] PCI: Using configuration type 1 for base access [ 0.618308] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.622290] ACPI: Added _OSI(Module Device) [ 0.622290] ACPI: Added _OSI(Processor Device) [ 0.622495] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.622984] ACPI: Added _OSI(Processor Aggregator Device) [ 0.649153] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.650645] xen: registering gsi 9 triggering 0 polarity 1 [ 0.658425] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.658431] ACPI: Interpreter enabled [ 0.658561] ACPI: PM: (supports S0 S1 S4 S5) [ 0.658666] ACPI: Using IOAPIC for interrupt routing [ 0.658842] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.658995] PCI: Using E820 reservations for host bridge windows [ 0.660635] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.697756] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.697906] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.698063] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.698172] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.698317] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.698797] PCI host bridge to bus 0000:00 [ 0.698897] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.699011] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.699123] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.699172] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.699315] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.699457] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.699633] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.700344] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.700864] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.701082] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.701186] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.701301] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.701466] pci 0000:00:09.0: enabling Extended Tags [ 0.701694] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.701999] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.702229] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.702362] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.702494] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.702656] pci 0000:00:0a.0: enabling Extended Tags [ 0.702879] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.703190] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 conventional PCI endpoint [ 0.703379] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.703509] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.703641] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.703772] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.703911] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.704041] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.704432] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.704632] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.705019] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.705212] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.705625] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.705814] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.706150] pci 0000:00:12.2: supports D1 D2 [ 0.706172] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.706476] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.706682] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.707064] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.707215] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.707621] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.707818] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.708155] pci 0000:00:13.2: supports D1 D2 [ 0.708172] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.708461] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.708981] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.709215] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.709358] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.709493] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.709626] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.709754] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.709916] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.710027] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.710138] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.710171] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.710516] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.711018] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.711257] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.711385] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.711509] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.711798] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.711987] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.712394] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.712787] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.713097] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.713346] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.713710] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.714092] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.714536] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.714728] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.714891] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.715026] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.715397] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.719249] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.719583] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.719815] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.719979] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.720113] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.720450] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.724251] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.724444] pci_bus 0000:03: extended config space not accessible [ 0.724636] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.724828] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.724968] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.726199] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.726456] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.726931] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.727068] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.727172] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.727318] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.727503] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.727652] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.727873] pci_bus 0000:00: on NUMA node 0 [ 0.728498] xen: registering gsi 13 triggering 1 polarity 0 [ 0.728984] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.729183] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.729367] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.729561] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.729754] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.730005] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.730291] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.730465] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.730706] xen:balloon: Initialising balloon driver [ 0.731273] iommu: Default domain type: Translated [ 0.731345] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.731624] SCSI subsystem initialized [ 0.732274] libata version 3.00 loaded. [ 0.732274] ACPI: bus type USB registered [ 0.732402] usbcore: registered new interface driver usbfs [ 0.732402] usbcore: registered new interface driver hub [ 0.732402] usbcore: registered new device driver usb [ 0.732474] pps_core: LinuxPPS API ver. 1 registered [ 0.732582] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.732733] PTP clock support registered [ 0.733252] Advanced Linux Sound Architecture Driver Initialized. [ 0.733761] NetLabel: Initializing [ 0.733864] NetLabel: domain hash size = 128 [ 0.733978] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.734118] NetLabel: unlabeled traffic allowed by default [ 0.735191] PCI: Using ACPI for IRQ routing [ 0.788043] PCI: pci_cache_line_size set to 64 bytes [ 0.790227] e820: reserve RAM buffer [mem 0x00096000-0x0009ffff] [ 0.790251] e820: reserve RAM buffer [mem 0x2006a000-0x23ffffff] [ 0.790548] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.790788] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.791163] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.791210] vgaarb: loaded [ 0.794952] clocksource: Switched to clocksource tsc-early [ 0.796197] VFS: Disk quotas dquot_6.6.0 [ 0.796311] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.796491] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.796660] pnp: PnP ACPI init [ 0.797190] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.797457] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.797958] xen: registering gsi 8 triggering 1 polarity 0 [ 0.798242] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.798615] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.798733] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.799278] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.799392] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.799505] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.799623] system 00:05: [io 0x040b] has been reserved [ 0.799759] system 00:05: [io 0x04d6] has been reserved [ 0.799865] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.799975] system 00:05: [io 0x0c14] has been reserved [ 0.800081] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.800206] system 00:05: [io 0x0c52] has been reserved [ 0.800314] system 00:05: [io 0x0c6c] has been reserved [ 0.800421] system 00:05: [io 0x0c6f] has been reserved [ 0.800528] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.800637] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.800746] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.800854] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.800963] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.801078] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.801197] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.801308] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.801418] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.801529] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.801638] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.801746] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.801858] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.801969] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.802375] xen: registering gsi 4 triggering 1 polarity 0 [ 0.802379] Already setup the GSI :4 [ 0.802491] pnp 00:06: [dma 0 disabled] [ 0.802825] xen: registering gsi 3 triggering 1 polarity 0 [ 0.802831] pnp 00:07: [dma 0 disabled] [ 0.803003] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.803448] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.803638] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.803752] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.803900] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.804013] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.804320] pnp: PnP ACPI: found 10 devices [ 0.828632] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.828892] NET: Registered PF_INET protocol family [ 0.829133] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.829632] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.829786] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.829930] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.830134] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.830361] TCP: Hash tables configured (established 4096 bind 4096) [ 0.830551] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.830669] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.830840] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.831456] RPC: Registered named UNIX socket transport module. [ 0.831573] RPC: Registered udp transport module. [ 0.831676] RPC: Registered tcp transport module. [ 0.831780] RPC: Registered tcp-with-tls transport module. [ 0.831885] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.832593] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.832989] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.833252] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.833383] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.833492] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.833608] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.833740] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.833855] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.833974] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.834133] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.834266] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.834377] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.834489] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.834600] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.834712] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.834819] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.834930] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.835037] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.835148] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.835271] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.835382] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.835492] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.835604] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.835730] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.835841] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.836203] xen: registering gsi 16 triggering 0 polarity 1 [ 0.836280] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.486474] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 635172 usecs [ 1.486742] xen: registering gsi 16 triggering 0 polarity 1 [ 1.486758] Already setup the GSI :16 [ 1.511989] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 24710 usecs [ 1.512472] xen: registering gsi 17 triggering 0 polarity 1 [ 1.512547] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.512743] xen: registering gsi 18 triggering 0 polarity 1 [ 1.512764] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.536419] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 23179 usecs [ 1.536706] xen: registering gsi 18 triggering 0 polarity 1 [ 1.536741] Already setup the GSI :18 [ 1.562500] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 25252 usecs [ 1.562777] xen: registering gsi 19 triggering 0 polarity 1 [ 1.562855] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.563064] xen: registering gsi 18 triggering 0 polarity 1 [ 1.563068] Already setup the GSI :18 [ 1.587416] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 23836 usecs [ 1.587639] PCI: CLS 64 bytes, default 64 [ 1.587847] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.587960] software IO TLB: mapped [mem 0x000000001b200000-0x000000001f200000] (64MB) [ 1.588008] Unpacking initramfs... [ 1.588231] kvm_intel: VMX not supported by CPU 5 [ 1.588372] kvm_amd: SVM not supported by CPU 5 [ 1.588481] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cb36b87b28, max_idle_ns: 440795230167 ns [ 1.588692] clocksource: Switched to clocksource tsc [ 1.595771] Initialise system trusted keyrings [ 1.596194] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.596845] NFS: Registering the id_resolver key type [ 1.596969] Key type id_resolver registered [ 1.597071] Key type id_legacy registered [ 1.597289] 9p: Installing v9fs 9p2000 file system support [ 1.627053] Key type asymmetric registered [ 1.627602] Asymmetric key parser 'x509' registered [ 1.628180] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.628832] io scheduler mq-deadline registered [ 1.629252] io scheduler kyber registered [ 1.631862] xen: registering gsi 53 triggering 0 polarity 1 [ 1.632110] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.634902] xen: registering gsi 54 triggering 0 polarity 1 [ 1.635088] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.638650] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.639461] ACPI: button: Power Button [PWRB] [ 1.640319] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.641506] ACPI: button: Power Button [PWRF] [ 1.645468] ACPI: \_PR_.P001: Found 2 idle states [ 1.646185] ACPI: \_PR_.P002: Found 2 idle states [ 1.648957] ACPI: \_PR_.P003: Found 2 idle states [ 1.649963] ACPI: \_PR_.P004: Found 2 idle states [ 1.650956] ACPI: \_PR_.P005: Found 2 idle states [ 1.651970] ACPI: \_PR_.P006: Found 2 idle states [ 1.654683] xen:xen_evtchn: Event-channel device installed [ 1.654944] xen_pciback: backend is vpci [ 1.656978] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.657605] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.659107] hpet_acpi_add: no address or irqs in _CRS [ 1.659442] Non-volatile memory driver v1.3 [ 1.663500] loop: module loaded [ 1.674812] ahci 0000:00:11.0: version 3.0 [ 1.675005] xen: registering gsi 22 triggering 0 polarity 1 [ 1.675068] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.675342] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.675525] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.675653] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.677486] scsi host0: ahci [ 1.678055] scsi host1: ahci [ 1.678578] scsi host2: ahci [ 1.679056] scsi host3: ahci [ 1.679230] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 0 [ 1.679377] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 0 [ 1.679529] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 0 [ 1.679688] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 0 [ 1.680398] tun: Universal TUN/TAP device driver, 1.6 [ 1.680730] e100: Intel(R) PRO/100 Network Driver [ 1.680838] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.680959] sky2: driver version 1.30 [ 1.681121] xen_netfront: Initialising Xen virtual ethernet driver [ 1.681678] xen: registering gsi 16 triggering 0 polarity 1 [ 1.681700] Already setup the GSI :16 [ 1.681787] xen: registering gsi 17 triggering 0 polarity 1 [ 1.681827] Already setup the GSI :17 [ 1.681915] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.681952] xen: registering gsi 19 triggering 0 polarity 1 [ 1.682054] Already setup the GSI :19 [ 1.682187] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.682407] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.738682] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.739063] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.739746] usb usb1: Product: OHCI PCI host controller [ 1.740188] usb usb1: Manufacturer: Linux 6.10.0-rc6+ ohci_hcd [ 1.740696] usb usb1: SerialNumber: 0000:00:12.0 [ 1.742410] hub 1-0:1.0: USB hub found [ 1.742999] hub 1-0:1.0: 3 ports detected [ 1.745010] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.745168] xen: registering gsi 16 triggering 0 polarity 1 [ 1.745183] Already setup the GSI :16 [ 1.745360] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2 [ 1.745558] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.746408] ehci-pci 0000:00:12.2: debug port 1 [ 1.747452] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.754666] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.755434] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 1.755641] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.755782] usb usb2: Product: EHCI Host Controller [ 1.755888] usb usb2: Manufacturer: Linux 6.10.0-rc6+ ehci_hcd [ 1.756037] usb usb2: SerialNumber: 0000:00:12.2 [ 1.756873] hub 2-0:1.0: USB hub found [ 1.757023] hub 2-0:1.0: 6 ports detected [ 1.809738] hub 1-0:1.0: USB hub found [ 1.809999] hub 1-0:1.0: 3 ports detected [ 1.810678] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.811317] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 1.811477] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.811674] ehci-pci 0000:00:13.2: debug port 1 [ 1.811940] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 1.818710] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.819734] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 1.820217] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.820787] usb usb3: Product: EHCI Host Controller [ 1.821188] usb usb3: Manufacturer: Linux 6.10.0-rc6+ ehci_hcd [ 1.821701] usb usb3: SerialNumber: 0000:00:13.2 [ 1.823235] hub 3-0:1.0: USB hub found [ 1.823482] hub 3-0:1.0: 6 ports detected [ 1.825411] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.826353] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.827239] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 1.872228] Freeing initrd memory: 20924K [ 1.884264] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.884456] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.884629] usb usb4: Product: OHCI PCI host controller [ 1.884737] usb usb4: Manufacturer: Linux 6.10.0-rc6+ ohci_hcd [ 1.884846] usb usb4: SerialNumber: 0000:00:12.1 [ 1.885274] hub 4-0:1.0: USB hub found [ 1.885389] hub 4-0:1.0: 3 ports detected [ 1.885919] xen: registering gsi 18 triggering 0 polarity 1 [ 1.885934] Already setup the GSI :18 [ 1.886201] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.886477] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.886727] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 1.942756] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.942941] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.943082] usb usb5: Product: OHCI PCI host controller [ 1.943189] usb usb5: Manufacturer: Linux 6.10.0-rc6+ ohci_hcd [ 1.943296] usb usb5: SerialNumber: 0000:00:13.0 [ 1.943714] hub 5-0:1.0: USB hub found [ 1.943827] hub 5-0:1.0: 3 ports detected [ 1.944239] xen: registering gsi 18 triggering 0 polarity 1 [ 1.944254] Already setup the GSI :18 [ 1.944430] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.944655] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.944864] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 1.985164] ata3: SATA link down (SStatus 0 SControl 300) [ 1.985822] ata4: SATA link down (SStatus 0 SControl 300) [ 2.000841] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 2.001024] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.001165] usb usb6: Product: OHCI PCI host controller [ 2.001271] usb usb6: Manufacturer: Linux 6.10.0-rc6+ ohci_hcd [ 2.001379] usb usb6: SerialNumber: 0000:00:13.1 [ 2.001837] hub 6-0:1.0: USB hub found [ 2.001952] hub 6-0:1.0: 3 ports detected [ 2.002372] xen: registering gsi 18 triggering 0 polarity 1 [ 2.002381] Already setup the GSI :18 [ 2.002556] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.002776] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.002991] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 2.058839] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 2.059038] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.059179] usb usb7: Product: OHCI PCI host controller [ 2.059285] usb usb7: Manufacturer: Linux 6.10.0-rc6+ ohci_hcd [ 2.059394] usb usb7: SerialNumber: 0000:00:14.5 [ 2.059835] hub 7-0:1.0: USB hub found [ 2.059948] hub 7-0:1.0: 2 ports detected [ 2.060359] usbcore: registered new interface driver usblp [ 2.060493] usbcore: registered new interface driver usb-storage [ 2.060671] i8042: PNP: No PS/2 controller found. [ 2.060775] i8042: Probing ports directly. [ 2.063801] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.063911] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.064288] rtc_cmos 00:02: RTC can wake from S4 [ 2.064918] rtc_cmos 00:02: registered as rtc0 [ 2.065082] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 2.065250] device-mapper: uevent: version 1.0.3 [ 2.065857] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 2.066017] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 2.066179] hid: raw HID events driver (C) Jiri Kosina [ 2.066541] usbcore: registered new interface driver usbhid [ 2.066648] usbhid: USB HID core driver [ 2.067516] Initializing XFRM netlink socket [ 2.067697] NET: Registered PF_INET6 protocol family [ 2.068670] Segment Routing with IPv6 [ 2.068804] In-situ OAM (IOAM) with IPv6 [ 2.068959] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.069385] NET: Registered PF_PACKET protocol family [ 2.069560] 9pnet: Installing 9P2000 support [ 2.069702] Key type dns_resolver registered [ 2.069828] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 2.071292] IPI shorthand broadcast: enabled [ 2.075979] sched_clock: Marking stable (2049003917, 26525318)->(2085472127, -9942892) [ 2.076682] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 2.077332] registered taskstats version 1 [ 2.077436] Loading compiled-in X.509 certificates [ 2.079886] PM: Magic number: 0:365:442 [ 2.081656] printk: legacy console [netcon0] enabled [ 2.081763] netconsole: network logging started [ 2.082047] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.095156] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.095627] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 2.095792] ALSA device list: [ 2.095890] No soundcards found. [ 2.096890] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 2.146691] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.146851] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.148564] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 2.149003] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.149889] ata2.00: ATAPI: ATAPI iHAS124 E, 4L07, max UDMA/100 [ 2.150783] ata1.00: configured for UDMA/133 [ 2.150921] ata2.00: configured for UDMA/100 [ 2.151813] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.152661] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.152815] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.152837] sd 0:0:0:0: [sda] Write Protect is off [ 2.153074] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.153100] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.153434] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.154017] scsi 1:0:0:0: CD-ROM ATAPI iHAS124 E 4L07 PQ: 0 ANSI: 5 [ 2.175426] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.175641] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.184231] sda: sda1 sda2 < sda5 > [ 2.185340] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.188726] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.189167] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.192420] Freeing unused kernel image (initmem) memory: 2680K [ 2.192608] Write protecting the kernel read-only data: 24576k [ 2.239785] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 2.306574] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.366400] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.366885] Run /init as init process [ 2.367210] with arguments: [ 2.367221] /init [ 2.367233] placeholder [ 2.367246] with environment: [ 2.367256] HOME=/ [ 2.367266] TERM=linux [ 2.468796] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.468981] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.469099] usb 6-2: Product: Hermon USB hidmouse Device [ 2.469206] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.475305] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.475751] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.479228] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.531510] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.747053] e1000e: Intel(R) PRO/1000 Network Driver [ 2.747181] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.747442] xen: registering gsi 48 triggering 0 polarity 1 [ 2.748247] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.748491] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.792377] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.836339] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0a:49:2e [ 2.836490] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.836693] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 2.836898] xen: registering gsi 47 triggering 0 polarity 1 [ 2.836926] xen: --> pirq=47 -> irq=47 (gsi=47) [ 2.837111] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.884699] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.931644] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0a:49:2f [ 2.931801] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.931989] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 2.933833] e1000e 0000:01:00.0 enx0cc47a0a492e: renamed from eth0 [ 2.934327] e1000e 0000:02:00.0 enx0cc47a0a492f: renamed from eth1 [ 3.099158] random: crng init done [ 3.642451] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.652834] EXT4-fs (dm-0): mounted filesystem bd9903a7-cd11-42a6-ac49-9f0bf935f5f4 ro with ordered data mode. Quota mode: none. [ 7.677607] EXT4-fs (dm-0): re-mounted bd9903a7-cd11-42a6-ac49-9f0bf935f5f4 r/w. Quota mode: none. [ 8.733546] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 8.757015] EXT4-fs (sda1): mounted filesystem 2c2a0182-a315-40c0-af55-5fa85009b600 r/w with ordered data mode. Quota mode: none. [ 8.833625] Adding 1949692k swap on /dev/mapper/rimava0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 10.329026] xenbr0: port 1(enx0cc47a0a492e) entered blocking state [ 10.329170] xenbr0: port 1(enx0cc47a0a492e) entered disabled state [ 10.329297] e1000e 0000:01:00.0 enx0cc47a0a492e: entered allmulticast mode [ 10.329452] e1000e 0000:01:00.0 enx0cc47a0a492e: entered promiscuous mode [ 13.432599] e1000e 0000:01:00.0 enx0cc47a0a492e: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 13.433129] xenbr0: port 1(enx0cc47a0a492e) entered blocking state [ 13.433239] xenbr0: port 1(enx0cc47a0a492e) entered forwarding state