[ 0.000000] Linux version 6.10.0-rc6+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Mon Jul 1 17:55:39 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/pinot0--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000f6000000-0x00000000f6003fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SML/H8SML, BIOS 3.5 11/25/2013 [ 0.000000] DMI: Memory slots populated: 2/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000011] Xen PV: Detected 4 vCPUS [ 0.038656] tsc: Fast TSC calibration using PIT [ 0.038657] tsc: Detected 2799.848 MHz processor [ 0.038658] tsc: Detected 2800.000 MHz TSC [ 0.038874] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.038878] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.038886] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.038888] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.038890] MTRRs set to read-only [ 0.038893] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.064542] RAMDISK: [mem 0x04000000-0x0546efff] [ 0.064553] ACPI: Early table checksum verification disabled [ 0.065307] ACPI: RSDP 0x00000000000FA1C0 000024 (v02 ACPIAM) [ 0.065316] ACPI: XSDT 0x00000000DFEA0100 00007C (v01 SMCI 20131125 MSFT 00000097) [ 0.065342] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.065374] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20240322/tbfadt-560) [ 0.065384] ACPI: DSDT 0x00000000DFEA0600 00562B (v01 1CF11 1CF11000 00000000 INTL 20051117) [ 0.065394] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.065404] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.065414] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.065424] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.065434] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.065444] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.065454] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.065465] ACPI: SSDT 0x00000000DFEAA6F0 000B9C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.065475] ACPI: EINJ 0x00000000DFEAB290 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.065485] ACPI: BERT 0x00000000DFEAB420 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.065494] ACPI: ERST 0x00000000DFEAB450 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.065504] ACPI: HEST 0x00000000DFEAB660 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.065510] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.065512] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c2a] [ 0.065513] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.065515] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.065516] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.065518] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.065519] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.065520] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.065521] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.065522] ACPI: Reserving SSDT table memory at [mem 0xdfeaa6f0-0xdfeab28b] [ 0.065524] ACPI: Reserving EINJ table memory at [mem 0xdfeab290-0xdfeab3bf] [ 0.065525] ACPI: Reserving BERT table memory at [mem 0xdfeab420-0xdfeab44f] [ 0.065526] ACPI: Reserving ERST table memory at [mem 0xdfeab450-0xdfeab65f] [ 0.065527] ACPI: Reserving HEST table memory at [mem 0xdfeab660-0xdfeab707] [ 0.065615] APIC: Switched APIC routing to: Xen PV [ 0.067947] Zone ranges: [ 0.067948] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.067951] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.067953] Normal empty [ 0.067954] Movable zone start for each node [ 0.067955] Early memory node ranges [ 0.067956] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.067958] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.067960] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.067967] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.068027] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.070361] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.070368] p2m virtual area at (____ptrval____), size is 40000000 [ 0.290262] Remapped 102 page(s) [ 0.290774] ACPI: PM-Timer IO Port: 0x808 [ 0.290799] CPU topo: CPU limit of 4 reached. Ignoring further CPUs [ 0.290823] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.290826] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.290845] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.290853] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.290863] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.290866] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.290884] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.290888] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.290898] CPU topo: Max. logical packages: 1 [ 0.290900] CPU topo: Max. logical dies: 1 [ 0.290901] CPU topo: Max. dies per package: 1 [ 0.290906] CPU topo: Max. threads per core: 1 [ 0.290908] CPU topo: Num. cores per package: 4 [ 0.290909] CPU topo: Num. threads per package: 4 [ 0.290909] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.290911] CPU topo: Rejected CPUs 4 [ 0.290926] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.290928] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.290930] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.290932] [mem 0x20066000-0xdfe9dfff] available for PCI devices [ 0.290935] Booting kernel on Xen [ 0.290936] Xen version: 4.19-unstable (preserve-AD) [ 0.290940] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.297199] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.297767] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u524288 [ 0.297775] pcpu-alloc: s194408 r8192 d30872 u524288 alloc=1*2097152 [ 0.297779] pcpu-alloc: [0] 0 1 2 3 [ 0.297833] xen: PV spinlocks enabled [ 0.297836] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.297840] Kernel command line: placeholder root=/dev/mapper/pinot0--vg-root ro console=hvc0 [ 0.297895] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.298020] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.298080] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.298270] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.298274] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.298276] software IO TLB: area num 4. [ 0.367406] Memory: 385712K/524284K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 138320K reserved, 0K cma-reserved) [ 0.367515] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.369995] Dynamic Preempt: voluntary [ 0.370094] rcu: Preemptible hierarchical RCU implementation. [ 0.370095] rcu: RCU event tracing is enabled. [ 0.370096] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.370098] Trampoline variant of Tasks RCU enabled. [ 0.370099] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.370100] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.370116] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.376787] NR_IRQS: 4352, nr_irqs: 1000, preallocated irqs: 16 [ 0.376912] xen:events: Using FIFO-based ABI [ 0.376934] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.376943] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.376948] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.376954] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.376959] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.376965] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.376970] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.376975] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.376981] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.376986] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.376991] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.376997] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.377002] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.377007] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.377012] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.377021] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.383095] Console: colour VGA+ 80x25 [ 0.383099] printk: legacy console [tty0] enabled [ 0.396669] printk: legacy console [hvc0] enabled [ 0.397334] ACPI: Core revision 20240322 [ 0.401470] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.401627] Xen: using vcpuop timer interface [ 0.401633] installing Xen timer for CPU 0 [ 0.401875] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c40e2248, max_idle_ns: 440795340634 ns [ 0.402035] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.00 BogoMIPS (lpj=2800000) [ 0.402255] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.402466] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.402576] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.402691] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.403044] Spectre V2 : Mitigation: Retpolines [ 0.403146] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.403289] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.403399] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.403508] RETBleed: Mitigation: untrained return thunk [ 0.403640] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.403785] Speculative Store Bypass: Vulnerable [ 0.403907] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.404037] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.404147] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.404256] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.404365] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.427818] Freeing SMP alternatives memory: 40K [ 0.427953] pid_max: default: 32768 minimum: 301 [ 0.428063] LSM: initializing lsm=capability,selinux [ 0.428172] SELinux: Initializing. [ 0.428304] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.428447] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.429158] cpu 0 spinlock event irq 57 [ 0.429271] VPMU disabled by hypervisor. [ 0.429764] Performance Events: PMU not available due to virtualization, using software events only. [ 0.429924] signal: max sigframe size: 1776 [ 0.430091] rcu: Hierarchical SRCU implementation. [ 0.430194] rcu: Max phase no-delay instances is 400. [ 0.435908] smp: Bringing up secondary CPUs ... [ 0.436214] installing Xen timer for CPU 1 [ 0.436594] installing Xen timer for CPU 2 [ 0.436944] installing Xen timer for CPU 3 [ 0.026007] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0011 [ 0.437198] cpu 1 spinlock event irq 77 [ 0.026007] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0012 [ 0.437361] cpu 2 spinlock event irq 78 [ 0.026007] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0013 [ 0.438083] cpu 3 spinlock event irq 79 [ 0.438367] smp: Brought up 1 node, 4 CPUs [ 0.439095] devtmpfs: initialized [ 0.439183] x86/mm: Memory block size: 128MB [ 0.439766] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.440099] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.440252] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.440468] PM: RTC time: 19:13:35, date: 2024-07-01 [ 0.440771] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.440905] xen:grant_table: Grant tables using version 1 layout [ 0.441027] Grant table initialized [ 0.441273] audit: initializing netlink subsys (disabled) [ 0.441418] audit: type=2000 audit(1719861215.449:1): state=initialized audit_enabled=0 res=1 [ 0.441418] thermal_sys: Registered thermal governor 'step_wise' [ 0.441418] thermal_sys: Registered thermal governor 'user_space' [ 0.442304] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.442561] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.523789] PCI: Using configuration type 1 for base access [ 0.524046] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.524235] ACPI: Added _OSI(Module Device) [ 0.524235] ACPI: Added _OSI(Processor Device) [ 0.524292] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.524397] ACPI: Added _OSI(Processor Aggregator Device) [ 0.529902] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.530440] xen: registering gsi 9 triggering 0 polarity 1 [ 0.531139] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.531511] ACPI: Interpreter enabled [ 0.531633] ACPI: PM: (supports S0 S1 S4 S5) [ 0.531734] ACPI: Using IOAPIC for interrupt routing [ 0.531910] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.532036] PCI: Using E820 reservations for host bridge windows [ 0.532313] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.542400] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.542516] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.542669] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.542783] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.542963] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.543312] PCI host bridge to bus 0000:00 [ 0.543413] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.543548] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.543662] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.543803] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.543943] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.544036] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.544229] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.544771] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.545283] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.545499] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.545656] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.545770] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.545957] pci 0000:00:09.0: enabling Extended Tags [ 0.546155] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.546442] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.546660] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.546777] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.546893] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.547089] pci 0000:00:0a.0: enabling Extended Tags [ 0.547309] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.547620] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f conventional PCI endpoint [ 0.547809] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.547937] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.548059] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.548187] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.548348] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.548475] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.548644] pci 0000:00:11.0: set SATA to AHCI mode [ 0.548962] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.549079] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.549474] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.549705] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.550109] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.550296] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.550657] pci 0000:00:12.2: supports D1 D2 [ 0.550761] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.551072] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.551259] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.551641] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.551832] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.552260] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.552487] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.552826] pci 0000:00:13.2: supports D1 D2 [ 0.552927] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.553237] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.553790] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.553977] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.554059] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.554186] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.554339] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.554466] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.554624] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.554738] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.554846] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.554956] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.555227] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.555749] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.555979] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.556053] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.556174] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.556494] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.556711] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.557115] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.557466] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.557784] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.558102] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.558449] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.558765] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.559237] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.559430] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.559592] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.559729] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.560097] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.563116] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.563444] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.563642] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.563862] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.563995] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.564333] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.567073] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.567276] pci_bus 0000:03: extended config space not accessible [ 0.567490] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.567684] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.567851] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.567985] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.568165] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.568636] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.568778] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.568925] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.569038] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.569188] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.569335] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.569575] pci_bus 0000:00: on NUMA node 0 [ 0.570113] xen: registering gsi 13 triggering 1 polarity 0 [ 0.570606] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.570783] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.570957] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.571104] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.571284] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.571457] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.571632] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.571870] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.572086] xen:balloon: Initialising balloon driver [ 0.572228] iommu: Default domain type: Translated [ 0.572263] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.572435] SCSI subsystem initialized [ 0.572549] libata version 3.00 loaded. [ 0.572549] ACPI: bus type USB registered [ 0.573056] usbcore: registered new interface driver usbfs [ 0.573170] usbcore: registered new interface driver hub [ 0.573288] usbcore: registered new device driver usb [ 0.573411] pps_core: LinuxPPS API ver. 1 registered [ 0.573514] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.573662] PTP clock support registered [ 0.573826] Advanced Linux Sound Architecture Driver Initialized. [ 0.574296] NetLabel: Initializing [ 0.574396] NetLabel: domain hash size = 128 [ 0.574497] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.574620] NetLabel: unlabeled traffic allowed by default [ 0.574752] PCI: Using ACPI for IRQ routing [ 0.601544] PCI: pci_cache_line_size set to 64 bytes [ 0.601706] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.601709] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.601732] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.601732] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.601732] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.602036] vgaarb: loaded [ 0.605073] clocksource: Switched to clocksource tsc-early [ 0.605331] VFS: Disk quotas dquot_6.6.0 [ 0.605445] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.605625] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.605785] pnp: PnP ACPI init [ 0.606115] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.606360] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.606863] xen: registering gsi 8 triggering 1 polarity 0 [ 0.607095] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.607396] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.607516] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.607963] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.608125] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.608240] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.608354] system 00:05: [io 0x040b] has been reserved [ 0.608467] system 00:05: [io 0x04d6] has been reserved [ 0.608578] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.608692] system 00:05: [io 0x0c14] has been reserved [ 0.608802] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.608916] system 00:05: [io 0x0c52] has been reserved [ 0.609028] system 00:05: [io 0x0c6c] has been reserved [ 0.609148] system 00:05: [io 0x0c6f] has been reserved [ 0.609286] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.609437] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.609551] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.609666] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.609780] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.609894] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.610008] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.610131] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.610245] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.610359] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.610498] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.610612] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.610729] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.610856] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.611239] xen: registering gsi 4 triggering 1 polarity 0 [ 0.611243] Already setup the GSI :4 [ 0.611348] pnp 00:06: [dma 0 disabled] [ 0.611681] xen: registering gsi 3 triggering 1 polarity 0 [ 0.611692] pnp 00:07: [dma 0 disabled] [ 0.611857] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.612236] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.612429] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.612549] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.612667] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.612785] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.613095] pnp: PnP ACPI: found 10 devices [ 0.635419] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.635564] NET: Registered PF_INET protocol family [ 0.635769] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.636195] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.636349] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.636499] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.636655] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.636824] TCP: Hash tables configured (established 4096 bind 4096) [ 0.636962] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.637147] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.637350] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.637627] RPC: Registered named UNIX socket transport module. [ 0.637741] RPC: Registered udp transport module. [ 0.637849] RPC: Registered tcp transport module. [ 0.637956] RPC: Registered tcp-with-tls transport module. [ 0.638077] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.638742] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.638859] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.638984] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.639128] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.639242] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.639367] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.639503] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.639624] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.639772] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.639971] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.640096] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.640211] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.640329] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.640446] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.640563] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.640675] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.640789] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.640901] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.641050] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.641165] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.641322] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.641436] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.641550] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.641667] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.641783] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.642056] xen: registering gsi 16 triggering 0 polarity 1 [ 0.642082] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.305181] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 647659 usecs [ 1.305422] xen: registering gsi 16 triggering 0 polarity 1 [ 1.305430] Already setup the GSI :16 [ 1.329184] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 23265 usecs [ 1.329427] xen: registering gsi 17 triggering 0 polarity 1 [ 1.329473] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.329660] xen: registering gsi 18 triggering 0 polarity 1 [ 1.329678] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.353208] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 23052 usecs [ 1.353447] xen: registering gsi 18 triggering 0 polarity 1 [ 1.353455] Already setup the GSI :18 [ 1.377181] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 23237 usecs [ 1.377426] xen: registering gsi 19 triggering 0 polarity 1 [ 1.377467] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.377703] xen: registering gsi 18 triggering 0 polarity 1 [ 1.377708] Already setup the GSI :18 [ 1.402181] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 23960 usecs [ 1.402404] PCI: CLS 64 bytes, default 64 [ 1.402590] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.402706] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 1.402749] Unpacking initramfs... [ 1.402904] kvm_intel: VMX not supported by CPU 0 [ 1.403095] kvm_amd: SVM not supported by CPU 0 [ 1.403232] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c40e2248, max_idle_ns: 440795340634 ns [ 1.403930] clocksource: Switched to clocksource tsc [ 1.472979] Initialise system trusted keyrings [ 1.473278] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.473579] NFS: Registering the id_resolver key type [ 1.473708] Key type id_resolver registered [ 1.473818] Key type id_legacy registered [ 1.473962] 9p: Installing v9fs 9p2000 file system support [ 1.491431] Key type asymmetric registered [ 1.491535] Asymmetric key parser 'x509' registered [ 1.491658] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.491809] io scheduler mq-deadline registered [ 1.491911] io scheduler kyber registered [ 1.492258] xen: registering gsi 53 triggering 0 polarity 1 [ 1.492286] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.492573] xen: registering gsi 54 triggering 0 polarity 1 [ 1.492589] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.492950] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.493149] ACPI: button: Power Button [PWRB] [ 1.493295] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.493496] ACPI: button: Power Button [PWRF] [ 1.495773] ACPI: \_PR_.P001: Found 2 idle states [ 1.495993] ACPI: \_PR_.P002: Found 2 idle states [ 1.496199] ACPI: \_PR_.P003: Found 2 idle states [ 1.496364] ACPI: \_PR_.P004: Found 2 idle states [ 1.496990] xen:xen_evtchn: Event-channel device installed [ 1.497254] xen_pciback: backend is vpci [ 1.498043] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.498427] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.500737] hpet_acpi_add: no address or irqs in _CRS [ 1.500909] Non-volatile memory driver v1.3 [ 1.503204] loop: module loaded [ 1.510194] ahci 0000:00:11.0: version 3.0 [ 1.510323] xen: registering gsi 22 triggering 0 polarity 1 [ 1.510355] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.510523] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.510718] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.510836] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.512196] scsi host0: ahci [ 1.512545] scsi host1: ahci [ 1.512868] scsi host2: ahci [ 1.513230] scsi host3: ahci [ 1.513390] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 0 [ 1.513544] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 0 [ 1.513712] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 0 [ 1.513864] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 0 [ 1.514451] tun: Universal TUN/TAP device driver, 1.6 [ 1.514689] e100: Intel(R) PRO/100 Network Driver [ 1.514797] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.514921] sky2: driver version 1.30 [ 1.515109] xen_netfront: Initialising Xen virtual ethernet driver [ 1.515454] xen: registering gsi 16 triggering 0 polarity 1 [ 1.515460] Already setup the GSI :16 [ 1.515528] xen: registering gsi 17 triggering 0 polarity 1 [ 1.515569] Already setup the GSI :17 [ 1.515665] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.515883] xen: registering gsi 19 triggering 0 polarity 1 [ 1.515888] Already setup the GSI :19 [ 1.516075] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.516290] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.565772] Freeing initrd memory: 20924K [ 1.572211] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.572365] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.572505] usb usb1: Product: OHCI PCI host controller [ 1.572610] usb usb1: Manufacturer: Linux 6.10.0-rc6+ ohci_hcd [ 1.572716] usb usb1: SerialNumber: 0000:00:12.0 [ 1.573064] hub 1-0:1.0: USB hub found [ 1.573203] hub 1-0:1.0: 3 ports detected [ 1.573615] xen: registering gsi 16 triggering 0 polarity 1 [ 1.573622] Already setup the GSI :16 [ 1.573766] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.573975] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2 [ 1.574138] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.574318] ehci-pci 0000:00:12.2: debug port 1 [ 1.574522] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.581133] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.581317] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 1.581463] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.581665] usb usb2: Product: EHCI Host Controller [ 1.581768] usb usb2: Manufacturer: Linux 6.10.0-rc6+ ehci_hcd [ 1.581875] usb usb2: SerialNumber: 0000:00:12.2 [ 1.582248] hub 2-0:1.0: USB hub found [ 1.582366] hub 2-0:1.0: 6 ports detected [ 1.634110] hub 1-0:1.0: USB hub found [ 1.634228] hub 1-0:1.0: 3 ports detected [ 1.634520] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.634724] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 1.634869] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.635055] ehci-pci 0000:00:13.2: debug port 1 [ 1.635250] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 1.642060] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.642303] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 1.642457] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.642597] usb usb3: Product: EHCI Host Controller [ 1.642768] usb usb3: Manufacturer: Linux 6.10.0-rc6+ ehci_hcd [ 1.642874] usb usb3: SerialNumber: 0000:00:13.2 [ 1.643175] hub 3-0:1.0: USB hub found [ 1.643285] hub 3-0:1.0: 6 ports detected [ 1.643608] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.643817] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.644096] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 1.700180] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.700332] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.700472] usb usb4: Product: OHCI PCI host controller [ 1.700576] usb usb4: Manufacturer: Linux 6.10.0-rc6+ ohci_hcd [ 1.700682] usb usb4: SerialNumber: 0000:00:12.1 [ 1.700950] hub 4-0:1.0: USB hub found [ 1.701084] hub 4-0:1.0: 3 ports detected [ 1.701423] xen: registering gsi 18 triggering 0 polarity 1 [ 1.701429] Already setup the GSI :18 [ 1.701565] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.701753] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.701953] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 1.758138] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.758292] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.758432] usb usb5: Product: OHCI PCI host controller [ 1.758536] usb usb5: Manufacturer: Linux 6.10.0-rc6+ ohci_hcd [ 1.758647] usb usb5: SerialNumber: 0000:00:13.0 [ 1.758984] hub 5-0:1.0: USB hub found [ 1.759111] hub 5-0:1.0: 3 ports detected [ 1.759567] xen: registering gsi 18 triggering 0 polarity 1 [ 1.759573] Already setup the GSI :18 [ 1.759712] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.759909] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.760096] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 1.816255] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.816408] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.816547] usb usb6: Product: OHCI PCI host controller [ 1.816651] usb usb6: Manufacturer: Linux 6.10.0-rc6+ ohci_hcd [ 1.816758] usb usb6: SerialNumber: 0000:00:13.1 [ 1.817070] hub 6-0:1.0: USB hub found [ 1.817205] hub 6-0:1.0: 3 ports detected [ 1.817721] xen: registering gsi 18 triggering 0 polarity 1 [ 1.817727] Already setup the GSI :18 [ 1.817862] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.818058] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.818232] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 1.824076] ata4: SATA link down (SStatus 0 SControl 300) [ 1.824219] ata3: SATA link down (SStatus 0 SControl 300) [ 1.874312] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.874464] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.874604] usb usb7: Product: OHCI PCI host controller [ 1.874708] usb usb7: Manufacturer: Linux 6.10.0-rc6+ ohci_hcd [ 1.874839] usb usb7: SerialNumber: 0000:00:14.5 [ 1.875149] hub 7-0:1.0: USB hub found [ 1.875284] hub 7-0:1.0: 2 ports detected [ 1.875728] usbcore: registered new interface driver usblp [ 1.875858] usbcore: registered new interface driver usb-storage [ 1.876079] i8042: PNP: No PS/2 controller found. [ 1.876185] i8042: Probing ports directly. [ 1.879164] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.879277] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.879676] rtc_cmos 00:02: RTC can wake from S4 [ 1.880216] rtc_cmos 00:02: registered as rtc0 [ 1.880360] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 1.880516] device-mapper: uevent: version 1.0.3 [ 1.880706] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 1.880886] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.881082] hid: raw HID events driver (C) Jiri Kosina [ 1.881412] usbcore: registered new interface driver usbhid [ 1.881518] usbhid: USB HID core driver [ 1.882027] Initializing XFRM netlink socket [ 1.882199] NET: Registered PF_INET6 protocol family [ 1.882884] Segment Routing with IPv6 [ 1.882999] In-situ OAM (IOAM) with IPv6 [ 1.883180] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.883472] NET: Registered PF_PACKET protocol family [ 1.883604] 9pnet: Installing 9P2000 support [ 1.883725] Key type dns_resolver registered [ 1.883841] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.884495] IPI shorthand broadcast: enabled [ 1.889005] sched_clock: Marking stable (1863006521, 25007865)->(1894834929, -6820543) [ 1.889554] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 1.889847] registered taskstats version 1 [ 1.889948] Loading compiled-in X.509 certificates [ 1.892268] PM: Magic number: 0:265:242 [ 1.892433] printk: legacy console [netcon0] enabled [ 1.892538] netconsole: network logging started [ 1.892771] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.902608] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.902998] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 1.903170] ALSA device list: [ 1.903266] No soundcards found. [ 1.905563] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 1.978075] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.978225] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.978763] ata2.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133 [ 1.979264] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.980119] ata2.00: configured for UDMA/133 [ 1.980585] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 1.981136] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.983119] ata1.00: configured for UDMA/133 [ 1.983422] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 1.984004] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.984101] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.984341] sd 0:0:0:0: [sda] Write Protect is off [ 1.984458] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.984461] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5 [ 1.984514] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.984886] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.985454] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.985539] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.985726] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 1.985862] sd 1:0:0:0: [sdb] Write Protect is off [ 1.985997] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.986131] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.986375] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 2.008777] sda: sda1 sda2 < sda5 > [ 2.009142] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.013357] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.015438] Freeing unused kernel image (initmem) memory: 2680K [ 2.015591] Write protecting the kernel read-only data: 24576k [ 2.028329] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 2.130041] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.144525] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.144676] Run /init as init process [ 2.144802] with arguments: [ 2.144804] /init [ 2.144805] placeholder [ 2.144806] with environment: [ 2.144808] HOME=/ [ 2.144809] TERM=linux [ 2.294188] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.294349] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.294501] usb 6-2: Product: Hermon USB hidmouse Device [ 2.294606] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.300639] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.301038] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.304644] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.356351] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.409664] e1000e: Intel(R) PRO/1000 Network Driver [ 2.409815] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.410057] xen: registering gsi 48 triggering 0 polarity 1 [ 2.410347] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.410581] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.456867] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.500807] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e8:ac [ 2.500958] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.501161] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.501369] xen: registering gsi 47 triggering 0 polarity 1 [ 2.501395] xen: --> pirq=47 -> irq=47 (gsi=47) [ 2.501586] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.548098] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.592971] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e8:ad [ 2.593173] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.593374] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.595515] e1000e 0000:02:00.0 enx002590aee8ad: renamed from eth1 [ 2.595858] e1000e 0000:01:00.0 enx002590aee8ac: renamed from eth0 [ 2.602157] random: crng init done [ 3.221877] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.227242] EXT4-fs (dm-0): mounted filesystem c059317d-65ca-427b-a7d2-bad0d250c9ab ro with ordered data mode. Quota mode: none. [ 7.308169] EXT4-fs (dm-0): re-mounted c059317d-65ca-427b-a7d2-bad0d250c9ab r/w. Quota mode: none. [ 8.872764] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 8.890966] EXT4-fs (sda1): mounted filesystem 7ebf4a30-abdf-4c1b-9d82-9795c83d6a97 r/w with ordered data mode. Quota mode: none. [ 8.971175] Adding 1949692k swap on /dev/mapper/pinot0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 10.456107] xenbr0: port 1(enx002590aee8ac) entered blocking state [ 10.456247] xenbr0: port 1(enx002590aee8ac) entered disabled state [ 10.456377] e1000e 0000:01:00.0 enx002590aee8ac: entered allmulticast mode [ 10.456534] e1000e 0000:01:00.0 enx002590aee8ac: entered promiscuous mode [ 13.798054] e1000e 0000:01:00.0 enx002590aee8ac: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 13.798611] xenbr0: port 1(enx002590aee8ac) entered blocking state [ 13.798722] xenbr0: port 1(enx002590aee8ac) entered forwarding state