[ 0.000000] Linux version 6.10.0-rc6+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Mon Jul 1 17:55:39 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/pinot1--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000f6000000-0x00000000f6003fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SML/H8SML, BIOS 3.5 11/25/2013 [ 0.000000] DMI: Memory slots populated: 2/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000012] Xen PV: Detected 4 vCPUS [ 0.039087] tsc: Fast TSC calibration using PIT [ 0.039089] tsc: Detected 2800.175 MHz processor [ 0.039090] tsc: Detected 2799.984 MHz TSC [ 0.039306] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.039310] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.039317] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.039320] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.039322] MTRRs set to read-only [ 0.039325] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.065238] RAMDISK: [mem 0x04000000-0x0546efff] [ 0.065250] ACPI: Early table checksum verification disabled [ 0.066006] ACPI: RSDP 0x00000000000FA1C0 000024 (v02 ACPIAM) [ 0.066015] ACPI: XSDT 0x00000000DFEA0100 00007C (v01 SMCI 20131125 MSFT 00000097) [ 0.066041] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.066074] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20240322/tbfadt-560) [ 0.066085] ACPI: DSDT 0x00000000DFEA0600 00562B (v01 1CF11 1CF11000 00000000 INTL 20051117) [ 0.066096] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.066106] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.066116] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.066126] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.066137] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.066148] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.066158] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.066169] ACPI: SSDT 0x00000000DFEAA6F0 000B9C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.066179] ACPI: EINJ 0x00000000DFEAB290 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.066190] ACPI: BERT 0x00000000DFEAB420 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.066200] ACPI: ERST 0x00000000DFEAB450 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.066210] ACPI: HEST 0x00000000DFEAB660 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.066216] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.066218] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c2a] [ 0.066219] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.066221] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.066222] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.066223] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.066225] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.066226] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.066227] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.066228] ACPI: Reserving SSDT table memory at [mem 0xdfeaa6f0-0xdfeab28b] [ 0.066230] ACPI: Reserving EINJ table memory at [mem 0xdfeab290-0xdfeab3bf] [ 0.066231] ACPI: Reserving BERT table memory at [mem 0xdfeab420-0xdfeab44f] [ 0.066232] ACPI: Reserving ERST table memory at [mem 0xdfeab450-0xdfeab65f] [ 0.066233] ACPI: Reserving HEST table memory at [mem 0xdfeab660-0xdfeab707] [ 0.066322] APIC: Switched APIC routing to: Xen PV [ 0.068782] Zone ranges: [ 0.068783] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.068786] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.068788] Normal empty [ 0.068789] Movable zone start for each node [ 0.068790] Early memory node ranges [ 0.068791] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.068793] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.068795] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.068803] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.068861] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.071132] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.071139] p2m virtual area at (____ptrval____), size is 40000000 [ 0.291280] Remapped 102 page(s) [ 0.291827] ACPI: PM-Timer IO Port: 0x808 [ 0.291854] CPU topo: CPU limit of 4 reached. Ignoring further CPUs [ 0.291878] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.291881] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.291901] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.291909] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.291919] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.291923] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.291942] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.291946] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.291957] CPU topo: Max. logical packages: 1 [ 0.291958] CPU topo: Max. logical dies: 1 [ 0.291959] CPU topo: Max. dies per package: 1 [ 0.291964] CPU topo: Max. threads per core: 1 [ 0.291966] CPU topo: Num. cores per package: 4 [ 0.291967] CPU topo: Num. threads per package: 4 [ 0.291967] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.291969] CPU topo: Rejected CPUs 4 [ 0.291984] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.291986] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.291988] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.291990] [mem 0x20066000-0xdfe9dfff] available for PCI devices [ 0.292000] Booting kernel on Xen [ 0.292001] Xen version: 4.19-unstable (preserve-AD) [ 0.292004] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.298259] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.298805] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u524288 [ 0.298813] pcpu-alloc: s194408 r8192 d30872 u524288 alloc=1*2097152 [ 0.298816] pcpu-alloc: [0] 0 1 2 3 [ 0.298869] xen: PV spinlocks enabled [ 0.298873] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.298876] Kernel command line: placeholder root=/dev/mapper/pinot1--vg-root ro console=hvc0 [ 0.298930] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.299042] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.299097] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.299291] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.299294] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.299297] software IO TLB: area num 4. [ 0.367858] Memory: 385712K/524284K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 138320K reserved, 0K cma-reserved) [ 0.367966] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.370567] Dynamic Preempt: voluntary [ 0.370666] rcu: Preemptible hierarchical RCU implementation. [ 0.370667] rcu: RCU event tracing is enabled. [ 0.370668] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.370670] Trampoline variant of Tasks RCU enabled. [ 0.370671] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.370673] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.370688] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.377388] NR_IRQS: 4352, nr_irqs: 1000, preallocated irqs: 16 [ 0.377513] xen:events: Using FIFO-based ABI [ 0.377543] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.377549] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.377555] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.377565] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.377571] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.377577] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.377582] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.377588] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.377594] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.377599] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.377605] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.377611] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.377616] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.377622] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.377628] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.377637] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.383735] Console: colour VGA+ 80x25 [ 0.383739] printk: legacy console [tty0] enabled [ 0.397467] printk: legacy console [hvc0] enabled [ 0.401377] ACPI: Core revision 20240322 [ 0.406522] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.406917] Xen: using vcpuop timer interface [ 0.406943] installing Xen timer for CPU 0 [ 0.407956] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c31c5631, max_idle_ns: 440795301911 ns [ 0.408461] Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.96 BogoMIPS (lpj=2799984) [ 0.409048] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.409745] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.410055] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.410369] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.410480] Spectre V2 : Mitigation: Retpolines [ 0.410790] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.411143] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.411446] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.411737] RETBleed: Mitigation: untrained return thunk [ 0.412052] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.412405] Speculative Store Bypass: Vulnerable [ 0.412795] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.413001] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.413133] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.413243] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.413352] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.435576] Freeing SMP alternatives memory: 40K [ 0.435697] pid_max: default: 32768 minimum: 301 [ 0.435832] LSM: initializing lsm=capability,selinux [ 0.435942] SELinux: Initializing. [ 0.436078] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.436221] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.437574] cpu 0 spinlock event irq 57 [ 0.437688] VPMU disabled by hypervisor. [ 0.438200] Performance Events: PMU not available due to virtualization, using software events only. [ 0.438363] signal: max sigframe size: 1776 [ 0.438509] rcu: Hierarchical SRCU implementation. [ 0.438614] rcu: Max phase no-delay instances is 400. [ 0.444378] smp: Bringing up secondary CPUs ... [ 0.444647] installing Xen timer for CPU 1 [ 0.445042] installing Xen timer for CPU 2 [ 0.445402] installing Xen timer for CPU 3 [ 0.030808] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0011 [ 0.445574] cpu 1 spinlock event irq 77 [ 0.030808] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0012 [ 0.445804] cpu 2 spinlock event irq 78 [ 0.030808] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0013 [ 0.446500] cpu 3 spinlock event irq 79 [ 0.446783] smp: Brought up 1 node, 4 CPUs [ 0.447503] devtmpfs: initialized [ 0.447601] x86/mm: Memory block size: 128MB [ 0.448145] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.448514] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.448668] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.448884] PM: RTC time: 18:57:40, date: 2024-07-01 [ 0.449188] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.449324] xen:grant_table: Grant tables using version 1 layout [ 0.449515] Grant table initialized [ 0.449849] audit: initializing netlink subsys (disabled) [ 0.449994] audit: type=2000 audit(1719860261.303:1): state=initialized audit_enabled=0 res=1 [ 0.449994] thermal_sys: Registered thermal governor 'step_wise' [ 0.449994] thermal_sys: Registered thermal governor 'user_space' [ 0.450715] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.450975] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.535347] PCI: Using configuration type 1 for base access [ 0.535523] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.535663] ACPI: Added _OSI(Module Device) [ 0.535663] ACPI: Added _OSI(Processor Device) [ 0.535730] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.535848] ACPI: Added _OSI(Processor Aggregator Device) [ 0.540643] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.541188] xen: registering gsi 9 triggering 0 polarity 1 [ 0.544568] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.544938] ACPI: Interpreter enabled [ 0.545080] ACPI: PM: (supports S0 S1 S4 S5) [ 0.545182] ACPI: Using IOAPIC for interrupt routing [ 0.545182] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.545182] PCI: Using E820 reservations for host bridge windows [ 0.545182] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.555657] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.555843] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.555999] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.556109] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.556251] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.556692] PCI host bridge to bus 0000:00 [ 0.556797] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.556912] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.557023] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.557163] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.557343] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.557453] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.557635] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.558191] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.558754] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.558976] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.559096] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.559210] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.559376] pci 0000:00:09.0: enabling Extended Tags [ 0.559580] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.559879] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.560147] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.560265] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.560379] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.561508] pci 0000:00:0a.0: enabling Extended Tags [ 0.561740] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.562054] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f conventional PCI endpoint [ 0.562268] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.562397] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.562478] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.562607] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.562741] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.562870] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.563037] pci 0000:00:11.0: set SATA to AHCI mode [ 0.563387] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.563505] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.563903] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.564095] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.564535] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.564728] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.565078] pci 0000:00:12.2: supports D1 D2 [ 0.565181] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.565453] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.565671] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.566065] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.566263] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.566677] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.566893] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.567236] pci 0000:00:13.2: supports D1 D2 [ 0.567338] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.567665] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.568221] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.568411] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.568478] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.568607] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.568738] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.568867] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.569069] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.569206] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.569314] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.569424] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.569654] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.570157] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.570425] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.570473] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.570598] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.570883] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.571072] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.571507] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.571885] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.572205] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.572536] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.572934] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.573252] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.573746] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.573964] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.574130] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.574267] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.574672] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.577508] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.577815] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.578011] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.578177] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.578350] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.578739] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.582533] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.582705] pci_bus 0000:03: extended config space not accessible [ 0.582875] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.583069] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.583205] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.583365] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.583625] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.584053] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.584186] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.584332] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.586455] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.586605] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.586753] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.587070] pci_bus 0000:00: on NUMA node 0 [ 0.587557] xen: registering gsi 13 triggering 1 polarity 0 [ 0.588052] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.588245] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.588421] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.588532] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.588707] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.588880] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.589072] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.589249] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.589492] xen:balloon: Initialising balloon driver [ 0.589611] iommu: Default domain type: Translated [ 0.589638] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.589826] SCSI subsystem initialized [ 0.590476] libata version 3.00 loaded. [ 0.590503] ACPI: bus type USB registered [ 0.590623] usbcore: registered new interface driver usbfs [ 0.590623] usbcore: registered new interface driver hub [ 0.590623] usbcore: registered new device driver usb [ 0.590699] pps_core: LinuxPPS API ver. 1 registered [ 0.590869] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.591021] PTP clock support registered [ 0.591501] Advanced Linux Sound Architecture Driver Initialized. [ 0.591688] NetLabel: Initializing [ 0.591787] NetLabel: domain hash size = 128 [ 0.591888] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.592016] NetLabel: unlabeled traffic allowed by default [ 0.592489] PCI: Using ACPI for IRQ routing [ 0.620279] PCI: pci_cache_line_size set to 64 bytes [ 0.620453] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.620457] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.620480] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.620586] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.620692] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.620837] vgaarb: loaded [ 0.622753] clocksource: Switched to clocksource tsc-early [ 0.623066] VFS: Disk quotas dquot_6.6.0 [ 0.623073] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.623225] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.623379] pnp: PnP ACPI init [ 0.623463] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.623732] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.624139] xen: registering gsi 8 triggering 1 polarity 0 [ 0.624186] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.624633] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.624749] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.625167] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.625277] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.625389] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.625510] system 00:05: [io 0x040b] has been reserved [ 0.625616] system 00:05: [io 0x04d6] has been reserved [ 0.625747] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.625855] system 00:05: [io 0x0c14] has been reserved [ 0.625960] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.626069] system 00:05: [io 0x0c52] has been reserved [ 0.626173] system 00:05: [io 0x0c6c] has been reserved [ 0.626279] system 00:05: [io 0x0c6f] has been reserved [ 0.626413] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.626531] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.626641] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.626750] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.626857] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.626989] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.627097] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.627204] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.627312] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.627420] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.627538] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.627647] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.627763] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.627873] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.628233] xen: registering gsi 4 triggering 1 polarity 0 [ 0.628237] Already setup the GSI :4 [ 0.628337] pnp 00:06: [dma 0 disabled] [ 0.628631] xen: registering gsi 3 triggering 1 polarity 0 [ 0.628642] pnp 00:07: [dma 0 disabled] [ 0.628789] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.629130] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.629311] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.629460] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.629576] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.629688] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.629944] pnp: PnP ACPI: found 10 devices [ 0.649298] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.649436] NET: Registered PF_INET protocol family [ 0.649602] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.649995] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.650143] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.650313] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.650490] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.650669] TCP: Hash tables configured (established 4096 bind 4096) [ 0.650816] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.650930] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.651074] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.651349] RPC: Registered named UNIX socket transport module. [ 0.651504] RPC: Registered udp transport module. [ 0.651613] RPC: Registered tcp transport module. [ 0.651715] RPC: Registered tcp-with-tls transport module. [ 0.651821] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.652322] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.652435] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.652566] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.652725] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.652832] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.652948] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.653077] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.653191] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.653309] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.653475] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.653585] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.653694] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.653805] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.653941] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.654055] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.654174] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.654282] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.654388] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.654508] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.654617] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.654727] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.654835] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.654943] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.655079] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.655189] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.655489] xen: registering gsi 16 triggering 0 polarity 1 [ 0.655513] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.318605] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 647691 usecs [ 1.318832] xen: registering gsi 16 triggering 0 polarity 1 [ 1.318840] Already setup the GSI :16 [ 1.341603] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 22292 usecs [ 1.341833] xen: registering gsi 17 triggering 0 polarity 1 [ 1.341879] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.342050] xen: registering gsi 18 triggering 0 polarity 1 [ 1.342067] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.364601] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 22074 usecs [ 1.364845] xen: registering gsi 18 triggering 0 polarity 1 [ 1.364853] Already setup the GSI :18 [ 1.387603] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 22298 usecs [ 1.387835] xen: registering gsi 19 triggering 0 polarity 1 [ 1.387876] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.388082] xen: registering gsi 18 triggering 0 polarity 1 [ 1.388086] Already setup the GSI :18 [ 1.410596] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 22037 usecs [ 1.410806] PCI: CLS 64 bytes, default 64 [ 1.410945] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.411063] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 1.411275] Unpacking initramfs... [ 1.411290] kvm_intel: VMX not supported by CPU 2 [ 1.411518] kvm_amd: SVM not supported by CPU 2 [ 1.411632] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c31c5631, max_idle_ns: 440795301911 ns [ 1.413364] clocksource: Switched to clocksource tsc [ 1.491157] Initialise system trusted keyrings [ 1.491447] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.491801] NFS: Registering the id_resolver key type [ 1.492010] Key type id_resolver registered [ 1.492111] Key type id_legacy registered [ 1.492283] 9p: Installing v9fs 9p2000 file system support [ 1.513108] Key type asymmetric registered [ 1.513229] Asymmetric key parser 'x509' registered [ 1.513371] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.513531] io scheduler mq-deadline registered [ 1.513639] io scheduler kyber registered [ 1.514158] xen: registering gsi 53 triggering 0 polarity 1 [ 1.514192] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.514475] xen: registering gsi 54 triggering 0 polarity 1 [ 1.514491] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.514885] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.515098] ACPI: button: Power Button [PWRB] [ 1.515244] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.515512] ACPI: button: Power Button [PWRF] [ 1.517754] ACPI: \_PR_.P001: Found 2 idle states [ 1.518018] ACPI: \_PR_.P002: Found 2 idle states [ 1.518175] ACPI: \_PR_.P003: Found 2 idle states [ 1.518322] ACPI: \_PR_.P004: Found 2 idle states [ 1.518980] xen:xen_evtchn: Event-channel device installed [ 1.519230] xen_pciback: backend is vpci [ 1.520020] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.520400] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.522682] hpet_acpi_add: no address or irqs in _CRS [ 1.522868] Non-volatile memory driver v1.3 [ 1.525411] loop: module loaded [ 1.531846] ahci 0000:00:11.0: version 3.0 [ 1.531952] xen: registering gsi 22 triggering 0 polarity 1 [ 1.531984] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.532159] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.532309] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.532419] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.533677] scsi host0: ahci [ 1.534020] scsi host1: ahci [ 1.534385] scsi host2: ahci [ 1.534734] scsi host3: ahci [ 1.534899] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 0 [ 1.535045] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 0 [ 1.535189] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 0 [ 1.535333] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 0 [ 1.535961] tun: Universal TUN/TAP device driver, 1.6 [ 1.536174] e100: Intel(R) PRO/100 Network Driver [ 1.536279] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.536399] sky2: driver version 1.30 [ 1.536554] xen_netfront: Initialising Xen virtual ethernet driver [ 1.536930] xen: registering gsi 16 triggering 0 polarity 1 [ 1.536938] Already setup the GSI :16 [ 1.537062] xen: registering gsi 17 triggering 0 polarity 1 [ 1.537113] Already setup the GSI :17 [ 1.537150] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.537415] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.537568] xen: registering gsi 19 triggering 0 polarity 1 [ 1.537573] Already setup the GSI :19 [ 1.537689] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.578846] Freeing initrd memory: 20924K [ 1.594166] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.594322] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.594489] usb usb1: Product: OHCI PCI host controller [ 1.594594] usb usb1: Manufacturer: Linux 6.10.0-rc6+ ohci_hcd [ 1.594703] usb usb1: SerialNumber: 0000:00:12.0 [ 1.595112] hub 1-0:1.0: USB hub found [ 1.595252] hub 1-0:1.0: 3 ports detected [ 1.595849] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.595881] xen: registering gsi 16 triggering 0 polarity 1 [ 1.595995] Already setup the GSI :16 [ 1.596129] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2 [ 1.596279] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.596449] ehci-pci 0000:00:12.2: debug port 1 [ 1.596699] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.603839] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.604093] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 1.604271] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.604412] usb usb2: Product: EHCI Host Controller [ 1.604518] usb usb2: Manufacturer: Linux 6.10.0-rc6+ ehci_hcd [ 1.604626] usb usb2: SerialNumber: 0000:00:12.2 [ 1.604902] hub 2-0:1.0: USB hub found [ 1.605017] hub 2-0:1.0: 6 ports detected [ 1.656905] hub 1-0:1.0: USB hub found [ 1.657023] hub 1-0:1.0: 3 ports detected [ 1.657336] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.657583] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 1.657768] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.657946] ehci-pci 0000:00:13.2: debug port 1 [ 1.658169] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 1.664841] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.665024] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 1.665170] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.665335] usb usb3: Product: EHCI Host Controller [ 1.665439] usb usb3: Manufacturer: Linux 6.10.0-rc6+ ehci_hcd [ 1.665547] usb usb3: SerialNumber: 0000:00:13.2 [ 1.665858] hub 3-0:1.0: USB hub found [ 1.666021] hub 3-0:1.0: 6 ports detected [ 1.666370] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.666585] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.666763] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 1.723132] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.723285] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.723426] usb usb4: Product: OHCI PCI host controller [ 1.723531] usb usb4: Manufacturer: Linux 6.10.0-rc6+ ohci_hcd [ 1.723638] usb usb4: SerialNumber: 0000:00:12.1 [ 1.724004] hub 4-0:1.0: USB hub found [ 1.724143] hub 4-0:1.0: 3 ports detected [ 1.724657] xen: registering gsi 18 triggering 0 polarity 1 [ 1.724664] Already setup the GSI :18 [ 1.724802] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.725017] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.725246] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 1.781068] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.781262] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.781427] usb usb5: Product: OHCI PCI host controller [ 1.781533] usb usb5: Manufacturer: Linux 6.10.0-rc6+ ohci_hcd [ 1.781641] usb usb5: SerialNumber: 0000:00:13.0 [ 1.781942] hub 5-0:1.0: USB hub found [ 1.782079] hub 5-0:1.0: 3 ports detected [ 1.782655] xen: registering gsi 18 triggering 0 polarity 1 [ 1.782662] Already setup the GSI :18 [ 1.782801] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.783006] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.783179] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 1.839099] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.839254] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.839399] usb usb6: Product: OHCI PCI host controller [ 1.839514] usb usb6: Manufacturer: Linux 6.10.0-rc6+ ohci_hcd [ 1.839621] usb usb6: SerialNumber: 0000:00:13.1 [ 1.839966] hub 6-0:1.0: USB hub found [ 1.840124] hub 6-0:1.0: 3 ports detected [ 1.840636] xen: registering gsi 18 triggering 0 polarity 1 [ 1.840642] Already setup the GSI :18 [ 1.840783] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.840996] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.841170] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 1.845997] ata4: SATA link down (SStatus 0 SControl 300) [ 1.846163] ata3: SATA link down (SStatus 0 SControl 300) [ 1.897070] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.897222] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.897363] usb usb7: Product: OHCI PCI host controller [ 1.897494] usb usb7: Manufacturer: Linux 6.10.0-rc6+ ohci_hcd [ 1.897640] usb usb7: SerialNumber: 0000:00:14.5 [ 1.897975] hub 7-0:1.0: USB hub found [ 1.898112] hub 7-0:1.0: 2 ports detected [ 1.898531] usbcore: registered new interface driver usblp [ 1.898688] usbcore: registered new interface driver usb-storage [ 1.898850] i8042: PNP: No PS/2 controller found. [ 1.898993] i8042: Probing ports directly. [ 1.901786] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.901903] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.902299] rtc_cmos 00:02: RTC can wake from S4 [ 1.902837] rtc_cmos 00:02: registered as rtc0 [ 1.903009] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 1.903166] device-mapper: uevent: version 1.0.3 [ 1.903389] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 1.903567] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.903722] hid: raw HID events driver (C) Jiri Kosina [ 1.904062] usbcore: registered new interface driver usbhid [ 1.904169] usbhid: USB HID core driver [ 1.904638] Initializing XFRM netlink socket [ 1.904780] NET: Registered PF_INET6 protocol family [ 1.905399] Segment Routing with IPv6 [ 1.905518] In-situ OAM (IOAM) with IPv6 [ 1.905659] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.905973] NET: Registered PF_PACKET protocol family [ 1.906106] 9pnet: Installing 9P2000 support [ 1.906225] Key type dns_resolver registered [ 1.906348] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.906862] IPI shorthand broadcast: enabled [ 1.911480] sched_clock: Marking stable (1881004157, 29808897)->(1916007840, -5194786) [ 1.911952] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 1.912270] registered taskstats version 1 [ 1.912371] Loading compiled-in X.509 certificates [ 1.914663] PM: Magic number: 0:433:998 [ 1.914805] system 00:00: hash matches [ 1.914955] printk: legacy console [netcon0] enabled [ 1.915060] netconsole: network logging started [ 1.915277] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.926233] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.926623] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 1.926894] ALSA device list: [ 1.929197] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 1.929365] No soundcards found. [ 1.999875] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.000016] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.000672] ata2.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133 [ 2.001278] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.001414] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 2.001879] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.002202] ata2.00: configured for UDMA/133 [ 2.003437] ata1.00: configured for UDMA/133 [ 2.003784] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.004444] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.004455] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.004727] sd 0:0:0:0: [sda] Write Protect is off [ 2.004839] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5 [ 2.004858] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.005034] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.005227] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.005373] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.005384] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.005526] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 2.005768] sd 1:0:0:0: [sdb] Write Protect is off [ 2.005898] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.005928] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.006119] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 2.034454] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.035905] sda: sda1 sda2 < sda5 > [ 2.036308] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.038379] Freeing unused kernel image (initmem) memory: 2680K [ 2.038533] Write protecting the kernel read-only data: 24576k [ 2.052669] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 2.152839] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.167757] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.167885] Run /init as init process [ 2.168023] with arguments: [ 2.168024] /init [ 2.168026] placeholder [ 2.168027] with environment: [ 2.168029] HOME=/ [ 2.168030] TERM=linux [ 2.317947] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.318111] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.318225] usb 6-2: Product: Hermon USB hidmouse Device [ 2.318331] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.324472] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.324844] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.328573] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.380289] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.438141] e1000e: Intel(R) PRO/1000 Network Driver [ 2.438265] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.438496] xen: registering gsi 48 triggering 0 polarity 1 [ 2.438543] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.438832] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.482855] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.526733] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e9:2a [ 2.526909] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.527100] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.527359] xen: registering gsi 47 triggering 0 polarity 1 [ 2.527387] xen: --> pirq=47 -> irq=47 (gsi=47) [ 2.527586] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.574890] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.619796] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e9:2b [ 2.619964] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.620153] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.622220] e1000e 0000:01:00.0 enx002590aee92a: renamed from eth0 [ 2.622962] e1000e 0000:02:00.0 enx002590aee92b: renamed from eth1 [ 2.634885] random: crng init done [ 3.353230] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.361603] EXT4-fs (dm-0): mounted filesystem f7373f90-5c36-4be3-99e1-43a019ee0f81 ro with ordered data mode. Quota mode: none. [ 7.597986] EXT4-fs (dm-0): re-mounted f7373f90-5c36-4be3-99e1-43a019ee0f81 r/w. Quota mode: none. [ 8.998475] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.005455] EXT4-fs (sda1): mounted filesystem 7ef70a71-9bb9-4960-a279-d0bb4842c6b8 r/w with ordered data mode. Quota mode: none. [ 9.079321] Adding 1949692k swap on /dev/mapper/pinot1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 10.706740] xenbr0: port 1(enx002590aee92a) entered blocking state [ 10.706962] xenbr0: port 1(enx002590aee92a) entered disabled state [ 10.707083] e1000e 0000:01:00.0 enx002590aee92a: entered allmulticast mode [ 10.707242] e1000e 0000:01:00.0 enx002590aee92a: entered promiscuous mode [ 13.888860] e1000e 0000:01:00.0 enx002590aee92a: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 13.889372] xenbr0: port 1(enx002590aee92a) entered blocking state [ 13.889509] xenbr0: port 1(enx002590aee92a) entered forwarding state