[ 0.000000] microcode: microcode updated early to revision 0x42e, date = 2019-03-14 [ 0.000000] Linux version 6.1.0-25-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.106-3 (2024-08-26) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007de2bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1800.035 MHz processor [ 0.000921] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000926] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000936] last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.001077] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001725] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved [ 0.001735] last_pfn = 0x7de2c max_arch_pfn = 0x400000000 [ 0.018542] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] [ 0.018568] Using GB pages for direct mapping [ 0.018960] RAMDISK: [mem 0x3310b000-0x3587cfff] [ 0.018968] ACPI: Early table checksum verification disabled [ 0.018973] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.018979] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.018987] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.018996] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.019001] ACPI: FACS 0x000000007E1D8080 000040 [ 0.019006] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.019011] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.019016] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.019021] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.019026] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.019031] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.019037] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.019042] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.019047] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.019052] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.019057] ACPI: DMAR 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.019062] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.019066] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.019069] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.019070] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.019071] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.019073] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.019074] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.019076] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.019077] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.019078] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.019080] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.019081] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.019082] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.019084] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.019085] ACPI: Reserving DMAR table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.019086] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.019156] No NUMA configuration found [ 0.019157] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] [ 0.019173] NODE_DATA(0) allocated [mem 0x27ffd5000-0x27fffffff] [ 0.019633] Zone ranges: [ 0.019635] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.019638] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.019640] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.019642] Device empty [ 0.019644] Movable zone start for each node [ 0.019649] Early memory node ranges [ 0.019649] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.019652] node 0: [mem 0x0000000000100000-0x000000007de2bfff] [ 0.019654] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.019657] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.019665] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.019722] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.027959] On node 0, zone Normal: 8660 pages in unavailable ranges [ 0.028253] ACPI: PM-Timer IO Port: 0x408 [ 0.028266] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.028268] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.028270] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.028271] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.028283] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.028290] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.028293] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028297] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.028304] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028305] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.028312] TSC deadline timer available [ 0.028313] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.028334] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028337] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.028339] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.028340] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.028341] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.028343] PM: hibernation: Registered nosave memory: [mem 0x7de2c000-0x7debafff] [ 0.028345] PM: hibernation: Registered nosave memory: [mem 0x7debb000-0x7dfc3fff] [ 0.028346] PM: hibernation: Registered nosave memory: [mem 0x7dfc4000-0x7e1e0fff] [ 0.028347] PM: hibernation: Registered nosave memory: [mem 0x7e1e1000-0x7f36afff] [ 0.028349] PM: hibernation: Registered nosave memory: [mem 0x7f36b000-0x7f7fffff] [ 0.028350] PM: hibernation: Registered nosave memory: [mem 0x7f800000-0x7fffffff] [ 0.028351] PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff] [ 0.028352] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.028353] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff] [ 0.028355] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff] [ 0.028356] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.028358] [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.028360] Booting paravirtualized kernel on bare hardware [ 0.028364] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.035646] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.036040] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.036049] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.036053] pcpu-alloc: [0] 0 1 2 3 [ 0.036093] Fallback order for Node 0: 0 [ 0.036097] Built 1 zonelists, mobility grouping on. Total pages: 2055603 [ 0.036099] Policy zone: Normal [ 0.036101] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.036171] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64", will be passed to user space. [ 0.036185] random: crng init done [ 0.037235] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.037804] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.037892] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.037904] software IO TLB: area num 4. [ 0.079608] Memory: 2086372K/8353556K available (14342K kernel code, 2335K rwdata, 9072K rodata, 2796K init, 17396K bss, 305204K reserved, 0K cma-reserved) [ 0.079820] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.079842] Kernel/User page tables isolation: enabled [ 0.079895] ftrace: allocating 40246 entries in 158 pages [ 0.090246] ftrace: allocated 158 pages with 5 groups [ 0.091195] Dynamic Preempt: voluntary [ 0.091239] rcu: Preemptible hierarchical RCU implementation. [ 0.091240] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.091242] Trampoline variant of Tasks RCU enabled. [ 0.091243] Rude variant of Tasks RCU enabled. [ 0.091244] Tracing variant of Tasks RCU enabled. [ 0.091245] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.091246] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.098660] NR_IRQS: 524544, nr_irqs: 864, preallocated irqs: 16 [ 0.098868] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.103514] Console: colour VGA+ 80x25 [ 1.027962] printk: console [ttyS0] enabled [ 1.032167] ACPI: Core revision 20220331 [ 1.036819] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 1.045954] APIC: Switch to symmetric I/O mode setup [ 1.050937] DMAR: Host address width 46 [ 1.054786] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 1.060113] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de [ 1.068034] DMAR: RMRR base: 0x0000007de91000 end: 0x0000007de9dfff [ 1.074308] DMAR: ATSR flags: 0x0 [ 1.077618] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 1.083885] DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0 [ 1.090245] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0 [ 1.096598] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 1.101996] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 1.111126] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 1.116524] x2apic enabled [ 1.119252] Switched APIC routing to cluster x2apic. [ 1.124759] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.149952] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f24ab110c, max_idle_ns: 440795234679 ns [ 1.160467] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.07 BogoMIPS (lpj=7200140) [ 1.164497] CPU0: Thermal monitoring enabled (TM1) [ 1.168550] process: using mwait in idle threads [ 1.172468] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 1.176465] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 1.180468] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.184466] Spectre V2 : Mitigation: Retpolines [ 1.188465] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.192465] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.196465] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 1.200466] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.204466] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 1.208466] MDS: Mitigation: Clear CPU buffers [ 1.212465] MMIO Stale Data: Unknown: No mitigations [ 1.216470] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.220465] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.224465] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.228465] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.232465] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.261017] Freeing SMP alternatives memory: 36K [ 1.264466] pid_max: default: 32768 minimum: 301 [ 1.268499] LSM: Security Framework initializing [ 1.272483] landlock: Up and running. [ 1.276465] Yama: disabled by default; enable with sysctl kernel.yama.* [ 1.280497] AppArmor: AppArmor initialized [ 1.284467] TOMOYO Linux initialized [ 1.288472] LSM support for eBPF active [ 1.292511] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.296481] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.304998] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2403 v2 @ 1.80GHz (family: 0x6, model: 0x3e, stepping: 0x4) [ 1.308655] cblist_init_generic: Setting adjustable number of callback queues. [ 1.312466] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.316495] cblist_init_generic: Setting adjustable number of callback queues. [ 1.320466] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.324488] cblist_init_generic: Setting adjustable number of callback queues. [ 1.328465] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.332486] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 1.336467] ... version: 3 [ 1.340465] ... bit width: 48 [ 1.344465] ... generic registers: 8 [ 1.348465] ... value mask: 0000ffffffffffff [ 1.352465] ... max period: 00007fffffffffff [ 1.356465] ... fixed-purpose events: 3 [ 1.360465] ... event mask: 00000007000000ff [ 1.364698] signal: max sigframe size: 1776 [ 1.368489] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 1.372497] rcu: Hierarchical SRCU implementation. [ 1.376466] rcu: Max phase no-delay instances is 1000. [ 1.381139] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.384560] smp: Bringing up secondary CPUs ... [ 1.388614] x86: Booting SMP configuration: [ 1.392471] .... node #0, CPUs: #1 #2 #3 [ 1.407823] smp: Brought up 1 node, 4 CPUs [ 1.412466] smpboot: Max logical packages: 1 [ 1.416465] smpboot: Total of 4 processors activated (14400.28 BogoMIPS) [ 1.442272] node 0 deferred pages initialised in 20ms [ 1.444928] devtmpfs: initialized [ 1.448547] x86/mm: Memory block size: 128MB [ 1.453505] ACPI: PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 1.456518] ACPI: PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 1.460622] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.464478] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.468526] pinctrl core: initialized pinctrl subsystem [ 1.473371] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.476744] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 1.480618] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.484617] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.488475] audit: initializing netlink subsys (disabled) [ 1.492481] audit: type=2000 audit(1726083763.404:1): state=initialized audit_enabled=0 res=1 [ 1.492616] thermal_sys: Registered thermal governor 'fair_share' [ 1.496469] thermal_sys: Registered thermal governor 'bang_bang' [ 1.500466] thermal_sys: Registered thermal governor 'step_wise' [ 1.504465] thermal_sys: Registered thermal governor 'user_space' [ 1.508465] thermal_sys: Registered thermal governor 'power_allocator' [ 1.512482] cpuidle: using governor ladder [ 1.520471] cpuidle: using governor menu [ 1.524440] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 1.524467] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.528568] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 1.532468] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 1.536475] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 1.540886] PCI: Using configuration type 1 for base access [ 1.544563] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 1.549780] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.552495] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 1.556468] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 1.564466] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 1.572465] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 1.576934] ACPI: Added _OSI(Module Device) [ 1.580470] ACPI: Added _OSI(Processor Device) [ 1.584466] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.592466] ACPI: Added _OSI(Processor Aggregator Device) [ 1.712614] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.742126] ACPI: Interpreter enabled [ 1.744488] ACPI: PM: (supports S0 S1 S4 S5) [ 1.748466] ACPI: Using IOAPIC for interrupt routing [ 1.756577] HEST: Table parsing has been initialized. [ 1.760590] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 1.764469] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.776465] PCI: Using E820 reservations for host bridge windows [ 1.781018] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.788574] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PRAD], AE_NOT_FOUND (20220331/psargs-330) [ 1.792469] ACPI Error: Aborting method \_GPE._L24 due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 1.796469] ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_L24] (20220331/evgpe-511) [ 1.800464] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.804464] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.812557] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR] [ 1.820617] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability] [ 1.828466] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.836824] PCI host bridge to bus 0000:00 [ 1.840468] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.848466] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.856465] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.860466] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.868466] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 1.876466] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.884466] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.892466] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.900466] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.904496] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.908549] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.916590] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.924565] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.928634] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.936564] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.940633] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.948504] pci 0000:00:03.0: enabling Extended Tags [ 1.952530] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.956619] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.964483] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.972610] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.976482] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.984601] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 1.992482] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 1.996600] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 2.004482] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 2.008602] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 2.016482] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 2.024600] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 2.028482] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 2.036602] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 2.040484] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 2.048601] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 2.056482] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 2.060601] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 2.068595] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 2.072589] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 2.080477] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 2.088616] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 2.092586] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 2.100609] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 2.104485] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 2.112540] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 2.116557] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 2.124485] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 2.132540] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 2.136569] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 2.144482] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 2.148556] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.156575] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 2.160564] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.168495] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 2.172467] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 2.180570] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 2.184564] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.192490] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 2.196467] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 2.204589] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 2.208482] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 2.216556] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.220568] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.228611] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 2.232681] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 2.240478] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 2.244472] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 2.252472] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 2.256472] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 2.264472] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 2.268472] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 2.272510] pci 0000:00:1f.2: PME# supported from D3hot [ 2.280556] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 2.284483] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 2.292489] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 2.296541] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 2.304486] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 2.312627] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.316517] pci 0000:00:01.1: PCI bridge to [bus 02] [ 2.320516] pci 0000:00:03.0: PCI bridge to [bus 03] [ 2.324548] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 2.332488] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 2.340480] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 2.348474] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 2.352491] pci 0000:04:00.0: enabling Extended Tags [ 2.356571] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 2.364466] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 2.376720] pci 0000:00:11.0: PCI bridge to [bus 04] [ 2.380469] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 2.384473] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 2.392563] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 2.400500] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 2.404502] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 2.412484] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 2.416654] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 2.424688] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 2.428469] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 2.436468] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 2.444566] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 2.448500] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 2.456502] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 2.460484] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 2.468650] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 2.472680] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 2.476469] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 2.484468] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 2.492488] pci_bus 0000:07: extended config space not accessible [ 2.496491] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 2.504482] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 2.508474] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 2.516474] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 2.524512] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.532576] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 2.536470] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 2.544472] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 2.552466] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 2.560466] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 2.568466] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 2.576466] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 2.588466] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 2.596466] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 2.604465] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 2.612466] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 2.625255] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 2.628470] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.640484] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 2.648466] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 2.656532] PCI host bridge to bus 0000:ff [ 2.660467] pci_bus 0000:ff: root bus resource [bus ff] [ 2.664479] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 2.672545] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 2.676534] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 2.684525] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 2.688528] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 2.696526] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 2.700531] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 2.708522] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 2.716524] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 2.720524] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 2.728526] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 2.732523] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 2.740525] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 2.744528] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 2.752541] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 2.756553] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 2.764547] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 2.768548] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 2.776547] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 2.780551] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 2.788550] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 2.792548] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 2.800555] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 2.804549] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 2.812547] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 2.816549] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 2.824550] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 2.828547] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 2.836546] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 2.840524] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 2.848530] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 2.852525] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 2.860528] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 2.864524] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 2.872523] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 2.880684] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 2.884518] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 2.892516] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 2.896515] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 2.904515] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 2.908516] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 2.916527] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 2.920516] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 2.930092] iommu: Default domain type: Translated [ 2.932466] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.940566] pps_core: LinuxPPS API ver. 1 registered [ 2.944466] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.952468] PTP clock support registered [ 2.956406] EDAC MC: Ver: 3.0.0 [ 2.960723] NetLabel: Initializing [ 2.964129] NetLabel: domain hash size = 128 [ 2.968467] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 2.976487] NetLabel: unlabeled traffic allowed by default [ 2.980466] PCI: Using ACPI for IRQ routing [ 2.991420] PCI: pci_cache_line_size set to 64 bytes [ 2.991546] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] [ 2.991549] e820: reserve RAM buffer [mem 0x7de2c000-0x7fffffff] [ 2.992504] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 2.996464] pci 0000:07:01.0: vgaarb: bridge control possible [ 2.996464] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.012473] vgaarb: loaded [ 3.017184] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 3.024466] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 3.032465] clocksource: Switched to clocksource tsc-early [ 3.038165] VFS: Disk quotas dquot_6.6.0 [ 3.042113] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.049174] AppArmor: AppArmor Filesystem Enabled [ 3.053910] pnp: PnP ACPI init [ 3.057119] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 3.063736] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 3.070346] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 3.076957] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 3.083697] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 3.090800] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 3.096720] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 3.104000] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 3.110123] pnp 00:07: [dma 0 disabled] [ 3.110362] pnp 00:08: [dma 0 disabled] [ 3.110639] system 00:09: [io 0x0400-0x0453] has been reserved [ 3.116566] system 00:09: [io 0x0458-0x047f] has been reserved [ 3.122482] system 00:09: [io 0x1180-0x119f] has been reserved [ 3.128402] system 00:09: [io 0x0500-0x057f] has been reserved [ 3.134321] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 3.140932] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 3.147893] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 3.154613] system 00:0a: [io 0x0454-0x0457] has been reserved [ 3.160814] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 3.168043] pnp: PnP ACPI: found 12 devices [ 3.178742] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.187702] NET: Registered PF_INET protocol family [ 3.192769] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 3.203097] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 3.211666] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.219496] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 3.227798] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 3.235587] TCP: Hash tables configured (established 65536 bind 65536) [ 3.242213] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 3.249767] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.256596] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.263889] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.269563] NET: Registered PF_XDP protocol family [ 3.274381] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.279355] pci 0000:00:01.1: PCI bridge to [bus 02] [ 3.284329] pci 0000:00:03.0: PCI bridge to [bus 03] [ 3.289303] pci 0000:00:11.0: PCI bridge to [bus 04] [ 3.294270] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 3.300369] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.308120] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 3.313084] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 3.319179] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 3.325969] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 3.330937] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 3.337032] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 3.343823] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 3.348793] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 3.355576] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.363319] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 3.369500] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 3.375680] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 3.381860] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 3.388040] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.394910] pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.401783] pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.408744] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.415704] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 3.421274] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.428493] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 3.434067] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 3.440333] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 3.445905] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 3.452171] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 3.458437] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.465655] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 3.471834] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 3.478014] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 3.484192] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 3.490372] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.497244] pci_bus 0000:07: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.504117] pci_bus 0000:07: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.511076] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.518129] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 3.549679] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 23908 usecs [ 3.577666] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 20088 usecs [ 3.585170] PCI: CLS 64 bytes, default 64 [ 3.589222] DMAR: No SATC found [ 3.589266] Trying to unpack rootfs image as initramfs... [ 3.592368] DMAR: dmar0: Using Queued invalidation [ 3.592446] pci 0000:00:00.0: Adding to iommu group 0 [ 3.607673] pci 0000:00:01.0: Adding to iommu group 1 [ 3.612753] pci 0000:00:01.1: Adding to iommu group 2 [ 3.617832] pci 0000:00:03.0: Adding to iommu group 3 [ 3.622913] pci 0000:00:04.0: Adding to iommu group 4 [ 3.628000] pci 0000:00:04.1: Adding to iommu group 5 [ 3.633086] pci 0000:00:04.2: Adding to iommu group 6 [ 3.638165] pci 0000:00:04.3: Adding to iommu group 7 [ 3.643242] pci 0000:00:04.4: Adding to iommu group 8 [ 3.648318] pci 0000:00:04.5: Adding to iommu group 9 [ 3.653403] pci 0000:00:04.6: Adding to iommu group 10 [ 3.658575] pci 0000:00:04.7: Adding to iommu group 11 [ 3.663736] pci 0000:00:05.0: Adding to iommu group 12 [ 3.668906] pci 0000:00:05.2: Adding to iommu group 13 [ 3.674083] pci 0000:00:05.4: Adding to iommu group 14 [ 3.679249] pci 0000:00:11.0: Adding to iommu group 15 [ 3.684438] pci 0000:00:16.0: Adding to iommu group 16 [ 3.689610] pci 0000:00:16.1: Adding to iommu group 16 [ 3.694788] pci 0000:00:1a.0: Adding to iommu group 17 [ 3.699961] pci 0000:00:1c.0: Adding to iommu group 18 [ 3.705133] pci 0000:00:1c.1: Adding to iommu group 19 [ 3.710302] pci 0000:00:1d.0: Adding to iommu group 20 [ 3.715474] pci 0000:00:1e.0: Adding to iommu group 21 [ 3.720685] pci 0000:00:1f.0: Adding to iommu group 22 [ 3.725852] pci 0000:00:1f.2: Adding to iommu group 22 [ 3.731016] pci 0000:00:1f.3: Adding to iommu group 22 [ 3.736181] pci 0000:00:1f.6: Adding to iommu group 22 [ 3.741357] pci 0000:04:00.0: Adding to iommu group 23 [ 3.746523] pci 0000:05:00.0: Adding to iommu group 24 [ 3.751698] pci 0000:06:00.0: Adding to iommu group 25 [ 3.756851] pci 0000:07:01.0: Adding to iommu group 21 [ 3.762035] pci 0000:ff:08.0: Adding to iommu group 26 [ 3.767210] pci 0000:ff:09.0: Adding to iommu group 27 [ 3.772425] pci 0000:ff:0a.0: Adding to iommu group 28 [ 3.777598] pci 0000:ff:0a.1: Adding to iommu group 28 [ 3.782768] pci 0000:ff:0a.2: Adding to iommu group 28 [ 3.787941] pci 0000:ff:0a.3: Adding to iommu group 28 [ 3.793136] pci 0000:ff:0b.0: Adding to iommu group 29 [ 3.798308] pci 0000:ff:0b.3: Adding to iommu group 29 [ 3.803497] pci 0000:ff:0c.0: Adding to iommu group 30 [ 3.808672] pci 0000:ff:0c.1: Adding to iommu group 30 [ 3.813868] pci 0000:ff:0d.0: Adding to iommu group 31 [ 3.819036] pci 0000:ff:0d.1: Adding to iommu group 31 [ 3.824232] pci 0000:ff:0e.0: Adding to iommu group 32 [ 3.829405] pci 0000:ff:0e.1: Adding to iommu group 32 [ 3.834575] pci 0000:ff:0f.0: Adding to iommu group 33 [ 3.839747] pci 0000:ff:0f.1: Adding to iommu group 34 [ 3.844910] pci 0000:ff:0f.2: Adding to iommu group 35 [ 3.850076] pci 0000:ff:0f.3: Adding to iommu group 36 [ 3.855244] pci 0000:ff:0f.4: Adding to iommu group 37 [ 3.860414] pci 0000:ff:0f.5: Adding to iommu group 38 [ 3.865587] pci 0000:ff:10.0: Adding to iommu group 39 [ 3.870756] pci 0000:ff:10.1: Adding to iommu group 40 [ 3.875930] pci 0000:ff:10.2: Adding to iommu group 41 [ 3.881103] pci 0000:ff:10.3: Adding to iommu group 42 [ 3.886270] pci 0000:ff:10.4: Adding to iommu group 43 [ 3.891448] pci 0000:ff:10.5: Adding to iommu group 44 [ 3.896616] pci 0000:ff:10.6: Adding to iommu group 45 [ 3.901795] pci 0000:ff:10.7: Adding to iommu group 46 [ 3.907008] pci 0000:ff:13.0: Adding to iommu group 47 [ 3.912181] pci 0000:ff:13.1: Adding to iommu group 47 [ 3.917349] pci 0000:ff:13.4: Adding to iommu group 47 [ 3.922526] pci 0000:ff:13.5: Adding to iommu group 47 [ 3.927730] pci 0000:ff:16.0: Adding to iommu group 48 [ 3.932907] pci 0000:ff:16.1: Adding to iommu group 48 [ 3.938086] pci 0000:ff:16.2: Adding to iommu group 48 [ 3.947101] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 3.953555] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.959991] software IO TLB: mapped [mem 0x0000000079e2c000-0x000000007de2c000] (64MB) [ 3.968482] Initialise system trusted keyrings [ 3.972945] Key type blacklist registered [ 3.977039] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 3.985315] zbud: loaded [ 3.988174] integrity: Platform Keyring initialized [ 3.993066] integrity: Machine keyring initialized [ 3.997857] Key type asymmetric registered [ 4.001956] Asymmetric key parser 'x509' registered [ 4.034933] Freeing initrd memory: 40392K [ 4.046203] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 4.051986] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 4.059423] io scheduler mq-deadline registered [ 4.066394] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.073213] Monitor-Mwait will be used to enter C-1 state [ 4.073227] Monitor-Mwait will be used to enter C-2 state [ 4.073233] ACPI: \_SB_.SCK0.C000: Found 2 idle states [ 4.083353] ERST: Error Record Serialization Table (ERST) support is initialized. [ 4.090846] pstore: Registered erst as persistent store backend [ 4.096908] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.103346] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.111446] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.119665] Linux agpgart interface v0.103 [ 4.123911] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 4.133050] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 4.139926] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 4.149971] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.154947] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.160163] mousedev: PS/2 mouse device common for all mice [ 4.165773] rtc_cmos 00:02: RTC can wake from S4 [ 4.170672] rtc_cmos 00:02: registered as rtc0 [ 4.175155] rtc_cmos 00:02: setting system clock to 2024-09-11T19:42:48 UTC (1726083768) [ 4.183278] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.191103] intel_pstate: Intel P-state driver initializing [ 4.197004] ledtrig-cpu: registered to indicate activity on CPUs [ 4.221478] NET: Registered PF_INET6 protocol family [ 4.234912] Segment Routing with IPv6 [ 4.238607] In-situ OAM (IOAM) with IPv6 [ 4.242570] mip6: Mobile IPv6 [ 4.245543] NET: Registered PF_PACKET protocol family [ 4.250692] mpls_gso: MPLS GSO support [ 4.254950] microcode: sig=0x306e4, pf=0x8, revision=0x42e [ 4.260495] microcode: Microcode Update Driver: v2.2. [ 4.260503] IPI shorthand broadcast: enabled [ 4.269856] sched_clock: Marking stable (3280258399, 989563756)->(4638015460, -368193305) [ 4.278285] registered taskstats version 1 [ 4.282397] Loading compiled-in X.509 certificates [ 4.330004] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.338755] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 4.349387] zswap: loaded using pool lzo/zbud [ 4.353970] Key type .fscrypt registered [ 4.357898] Key type fscrypt-provisioning registered [ 4.363180] pstore: Using crash dump compression: deflate [ 4.377322] Key type encrypted registered [ 4.381368] AppArmor: AppArmor sha1 policy hashing enabled [ 4.386869] ima: No TPM chip found, activating TPM-bypass! [ 4.392351] ima: Allocated hash algorithm: sha256 [ 4.397076] ima: No architecture policies found [ 4.401620] evm: Initialising EVM extended attributes: [ 4.406755] evm: security.selinux [ 4.410073] evm: security.SMACK64 (disabled) [ 4.414346] evm: security.SMACK64EXEC (disabled) [ 4.418966] evm: security.SMACK64TRANSMUTE (disabled) [ 4.424018] evm: security.SMACK64MMAP (disabled) [ 4.428638] evm: security.apparmor [ 4.432044] evm: security.ima [ 4.435016] evm: security.capability [ 4.438595] evm: HMAC attrs: 0x1 [ 4.617198] clk: Disabling unused clocks [ 4.622825] Freeing unused decrypted memory: 2036K [ 4.628317] Freeing unused kernel image (initmem) memory: 2796K [ 4.634339] Write protecting the kernel read-only data: 26624k [ 4.640931] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 4.647885] Freeing unused kernel image (rodata/data gap) memory: 1168K [ 4.741303] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.747746] x86/mm: Checking user space page tables [ 4.828018] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.834459] Run /init as init process [ 4.838128] with arguments: [ 4.838130] /init [ 4.838132] with environment: [ 4.838133] HOME=/ [ 4.838134] TERM=linux [ 4.838135] BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 [ 4.989580] tsc: Refined TSC clocksource calibration: 1799.999 MHz [ 4.995801] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 5.006080] clocksource: Switched to clocksource tsc [ 5.067514] e1000e: Intel(R) PRO/1000 Network Driver [ 5.068120] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 5.072496] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 5.072750] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.093837] i2c i2c-0: 1/6 memory slots populated (from DMI) [ 5.099509] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 5.115721] SCSI subsystem initialized [ 5.135820] ACPI: bus type USB registered [ 5.139870] usbcore: registered new interface driver usbfs [ 5.145463] usbcore: registered new interface driver hub [ 5.149604] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 5.150905] usbcore: registered new device driver usb [ 5.172260] libata version 3.00 loaded. [ 5.173235] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.178490] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.185905] ehci-pci 0000:00:1a.0: debug port 2 [ 5.194148] ahci 0000:00:1f.2: version 3.0 [ 5.194410] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 5.204449] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 5.212642] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 5.217903] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a6 [ 5.221601] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.228566] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 5.234369] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.241281] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.249439] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.256386] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.263352] usb usb1: Product: EHCI Host Controller [ 5.263355] usb usb1: Manufacturer: Linux 6.1.0-25-amd64 ehci_hcd [ 5.283628] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.286214] scsi host0: ahci [ 5.288425] hub 1-0:1.0: USB hub found [ 5.291508] scsi host1: ahci [ 5.294907] hub 1-0:1.0: 2 ports detected [ 5.298085] scsi host2: ahci [ 5.302148] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.305099] scsi host3: ahci [ 5.309921] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.312951] scsi host4: ahci [ 5.320205] ehci-pci 0000:00:1d.0: debug port 2 [ 5.323345] scsi host5: ahci [ 5.327744] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 5.330792] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 32 [ 5.331605] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 5.345587] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.345923] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 5.345945] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 5.351246] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 32 [ 5.357642] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.364117] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 32 [ 5.364120] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 32 [ 5.364354] isci 0000:04:00.0: OEM parameter table found in OROM [ 5.364357] isci 0000:04:00.0: OEM SAS parameters (version: 1.0) loaded (platform) [ 5.370386] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.377778] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 32 [ 5.378015] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 5.380806] scsi host6: isci [ 5.386042] usb usb2: Product: EHCI Host Controller [ 5.390949] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a7 [ 5.390954] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 5.391040] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.393437] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 32 [ 5.400832] usb usb2: Manufacturer: Linux 6.1.0-25-amd64 ehci_hcd [ 5.480261] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.485135] hub 2-0:1.0: USB hub found [ 5.488914] hub 2-0:1.0: 2 ports detected [ 5.609622] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.720571] ata3: SATA link down (SStatus 0 SControl 300) [ 5.726009] ata2: SATA link down (SStatus 0 SControl 300) [ 5.731441] ata4: SATA link down (SStatus 0 SControl 300) [ 5.736865] ata6: SATA link down (SStatus 0 SControl 300) [ 5.742297] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.745602] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.748533] ata5: SATA link down (SStatus 0 SControl 300) [ 5.760522] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 5.767716] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.775004] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.775596] ata1.00: configured for UDMA/133 [ 5.783197] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.787661] hub 1-1:1.0: USB hub found [ 5.797890] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 5.798524] hub 1-1:1.0: 6 ports detected [ 5.814323] e1000e 0000:06:00.0 enx002590eb25a7: renamed from eth1 [ 5.833747] e1000e 0000:05:00.0 enx002590eb25a6: renamed from eth0 [ 5.840663] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.848338] sd 0:0:0:0: [sda] Write Protect is off [ 5.853137] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.853157] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.862224] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 5.897532] sda: sda1 sda2 < sda5 > [ 5.901410] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.914127] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.922323] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.929832] hub 2-1:1.0: USB hub found [ 5.933756] hub 2-1:1.0: 8 ports detected [ 6.105611] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 6.206276] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.218516] device-mapper: uevent: version 1.0.3 [ 6.223246] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 6.232623] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 6.240983] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.248292] usb 1-1.1: Product: Hermon USB hidmouse Device [ 6.253776] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 6.269906] hid: raw HID events driver (C) Jiri Kosina [ 6.280629] usbcore: registered new interface driver usbhid [ 6.286262] usbhid: USB HID core driver [ 6.292593] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input3 [ 6.307487] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 6.322418] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input4 [ 6.461735] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 6.893514] PM: Image not found (code -22) [ 7.241367] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 7.252793] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 7.448369] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 9.085738] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 9.109642] ACPI: button: Power Button [PWRB] [ 9.114100] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 9.121551] ACPI: button: Power Button [PWRF] [ 9.239269] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 9.401453] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 9.413867] IPMI message handler: version 39.2 [ 9.450402] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.518878] ipmi device interface [ 9.568596] dca service started, version 1.12.1 [ 9.593490] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 9.601451] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 9.607238] RAPL PMU: hw unit of domain package 2^-16 Joules [ 9.612934] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 9.619226] iTCO_vendor_support: vendor-support=0 [ 9.619245] ipmi_si: IPMI System Interface driver [ 9.628709] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 9.635080] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 9.642346] ipmi_si: Adding SMBIOS-specified kcs state machine [ 9.648250] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 9.648338] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 9.666351] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 9.674754] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 9.675027] cryptd: max_cpu_qlen set to 1000 [ 9.706365] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 9.715084] ipmi_si: Adding ACPI-specified kcs state machine [ 9.720831] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 9.776342] ACPI: bus type drm_connector registered [ 9.782220] AVX version of gcm_enc/dec engaged. [ 9.786823] AES CTR mode by8 optimization enabled [ 10.025611] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 10.066813] mgag200 0000:07:01.0: vgaarb: deactivate vga console [ 10.078006] Console: switching to colour dummy device 80x25 [ 10.089757] [drm] Initialized mgag200 1.0.0 20110418 for 0000:07:01.0 on minor 0 [ 10.099261] fbcon: mgag200drmfb (fb0) is primary device [ 10.106390] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x0703, dev_id: 0x20) [ 10.121013] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 10.181549] ipmi_ssif: IPMI SSIF Interface driver [ 10.472432] Console: switching to colour frame buffer device 128x48 [ 10.569323] mgag200 0000:07:01.0: [drm] fb0: mgag200drmfb frame buffer device [ 10.642558] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.642577] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.642582] EDAC sbridge: Seeking for: PCI ID 8086:0e60 [ 10.642601] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.642609] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.642613] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.642620] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.642624] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.642631] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.642635] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.642642] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.642646] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.642653] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.642657] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.642664] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.642668] EDAC sbridge: Seeking for: PCI ID 8086:0e68 [ 10.642675] EDAC sbridge: Seeking for: PCI ID 8086:0e79 [ 10.642682] EDAC sbridge: Seeking for: PCI ID 8086:0e6a [ 10.642689] EDAC sbridge: Seeking for: PCI ID 8086:0e6b [ 10.642696] EDAC sbridge: Seeking for: PCI ID 8086:0e6c [ 10.642703] EDAC sbridge: Seeking for: PCI ID 8086:0e6d [ 10.642710] EDAC sbridge: Seeking for: PCI ID 8086:0eb8 [ 10.642717] EDAC sbridge: Seeking for: PCI ID 8086:0ebc [ 10.642724] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.642732] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.642734] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.642743] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.642745] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.642754] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.642880] EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT) [ 10.653949] EDAC sbridge: Ver: 1.1.2 [ 10.729483] intel_rapl_common: Found RAPL domain package [ 10.734818] intel_rapl_common: Found RAPL domain core [ 10.739897] intel_rapl_common: Found RAPL domain dram [ 11.840014] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 13.108613] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 13.139371] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 13.187944] Adding 1949692k swap on /dev/mapper/fiano1--vg-swap_1. Priority:-2 extents:1 across:1949692k FS [ 13.752199] audit: type=1400 audit(1726083777.756:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1066 comm="apparmor_parser" [ 13.767597] audit: type=1400 audit(1726083777.756:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1066 comm="apparmor_parser" [ 13.783655] audit: type=1400 audit(1726083777.780:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1065 comm="apparmor_parser" [ 13.812325] audit: type=1400 audit(1726083777.816:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1068 comm="apparmor_parser" [ 13.827466] audit: type=1400 audit(1726083777.816:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1068 comm="apparmor_parser" [ 13.842405] audit: type=1400 audit(1726083777.820:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1068 comm="apparmor_parser" [ 13.967258] audit: type=1400 audit(1726083777.972:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=1077 comm="apparmor_parser" [ 14.018057] audit: type=1400 audit(1726083778.024:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1067 comm="apparmor_parser" [ 14.036041] audit: type=1400 audit(1726083778.024:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1067 comm="apparmor_parser" [ 14.053490] audit: type=1400 audit(1726083778.028:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1067 comm="apparmor_parser" [ 17.126668] e1000e 0000:05:00.0 enx002590eb25a6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 17.136428] IPv6: ADDRCONF(NETDEV_CHANGE): enx002590eb25a6: link becomes ready