[ 0.000000] Linux version 6.1.109+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Wed Sep 11 21:09:28 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000460] tsc: Detected 2199.996 MHz processor [ 0.000895] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000899] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000906] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000908] Disabled [ 0.000908] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000912] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000951] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027342] RAMDISK: [mem 0x04000000-0x05423fff] [ 0.027350] ACPI: Early table checksum verification disabled [ 0.027948] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.027960] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027997] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028045] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028061] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028077] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028093] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028109] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028125] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028140] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028157] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028173] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028189] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028205] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028221] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028237] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028253] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028269] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028285] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028301] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028317] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028332] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028341] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028343] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028344] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028345] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028346] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028347] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028347] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028348] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028349] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028350] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028351] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028352] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028353] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028354] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028355] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028356] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028357] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028358] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028359] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028360] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028405] Setting APIC routing to Xen PV. [ 0.032349] Zone ranges: [ 0.032350] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032352] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032354] Normal empty [ 0.032355] Movable zone start for each node [ 0.032356] Early memory node ranges [ 0.032356] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032358] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032360] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032365] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032400] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.033956] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.033961] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221447] Remapped 102 page(s) [ 0.222821] ACPI: PM-Timer IO Port: 0x408 [ 0.222874] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.222877] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.222878] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.222880] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.222881] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.222883] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.222884] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.222886] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.222914] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.222927] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.222931] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.222957] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.222961] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223030] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223045] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223047] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223048] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223051] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223055] Booting kernel on Xen [ 0.223056] Xen version: 4.20-unstable (preserve-AD) [ 0.223059] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229295] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.229578] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.229585] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.229588] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.229671] xen: PV spinlocks enabled [ 0.229674] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.229679] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.229682] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.229719] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.229728] random: crng init done [ 0.229777] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.229802] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231116] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231118] software IO TLB: area num 8. [ 0.290452] Memory: 389292K/524284K available (14349K kernel code, 2686K rwdata, 4576K rodata, 1580K init, 1288K bss, 134740K reserved, 0K cma-reserved) [ 0.290619] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.293092] Dynamic Preempt: voluntary [ 0.293191] rcu: Preemptible hierarchical RCU implementation. [ 0.293192] rcu: RCU event tracing is enabled. [ 0.293193] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.293194] Trampoline variant of Tasks RCU enabled. [ 0.293195] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.293197] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.303719] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.303842] xen:events: Using FIFO-based ABI [ 0.303867] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.303875] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.303882] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.303889] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.303897] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.303904] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.303911] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.303918] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.303926] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.303933] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.303941] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.303948] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.303955] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.303964] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.303971] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.303982] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.309329] Console: colour VGA+ 80x25 [ 0.323995] printk: console [tty0] enabled [ 0.325320] printk: console [hvc0] enabled [ 0.325462] ACPI: Core revision 20220331 [ 0.340961] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.341127] Xen: using vcpuop timer interface [ 0.341134] installing Xen timer for CPU 0 [ 0.341284] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.341442] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199996) [ 0.341770] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.341887] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.342014] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.342161] Spectre V2 : Mitigation: Retpolines [ 0.342449] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.342603] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.342722] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.342843] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.342990] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.343107] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.343258] MDS: Mitigation: Clear CPU buffers [ 0.343370] TAA: Mitigation: Clear CPU buffers [ 0.343446] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.343610] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.343754] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.343905] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.344024] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.344143] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.361855] Freeing SMP alternatives memory: 40K [ 0.361981] pid_max: default: 32768 minimum: 301 [ 0.362464] LSM: Security Framework initializing [ 0.362586] SELinux: Initializing. [ 0.362724] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.362874] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363535] cpu 0 spinlock event irq 25 [ 0.363654] VPMU disabled by hypervisor. [ 0.364092] cblist_init_generic: Setting adjustable number of callback queues. [ 0.364238] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.364394] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.364447] signal: max sigframe size: 1776 [ 0.364611] rcu: Hierarchical SRCU implementation. [ 0.364735] rcu: Max phase no-delay instances is 400. [ 0.365224] smp: Bringing up secondary CPUs ... [ 0.365562] installing Xen timer for CPU 1 [ 0.366031] cpu 1 spinlock event irq 35 [ 0.366582] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.366750] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.366937] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.367667] installing Xen timer for CPU 2 [ 0.368163] cpu 2 spinlock event irq 41 [ 0.368540] installing Xen timer for CPU 3 [ 0.368988] cpu 3 spinlock event irq 47 [ 0.368988] installing Xen timer for CPU 4 [ 0.369784] cpu 4 spinlock event irq 53 [ 0.369784] installing Xen timer for CPU 5 [ 0.370639] cpu 5 spinlock event irq 59 [ 0.370651] installing Xen timer for CPU 6 [ 0.371485] cpu 6 spinlock event irq 65 [ 0.371705] installing Xen timer for CPU 7 [ 0.372136] cpu 7 spinlock event irq 71 [ 0.372674] smp: Brought up 1 node, 8 CPUs [ 0.372819] smpboot: Max logical packages: 1 [ 0.373035] devtmpfs: initialized [ 0.373035] x86/mm: Memory block size: 128MB [ 0.373676] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.373712] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.373866] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.374446] PM: RTC time: 23:12:57, date: 2024-09-11 [ 0.374691] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.374836] xen:grant_table: Grant tables using version 1 layout [ 0.374973] Grant table initialized [ 0.375275] audit: initializing netlink subsys (disabled) [ 0.375465] audit: type=2000 audit(1726096378.148:1): state=initialized audit_enabled=0 res=1 [ 0.375514] thermal_sys: Registered thermal governor 'step_wise' [ 0.375514] thermal_sys: Registered thermal governor 'user_space' [ 0.375641] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.376067] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.376449] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.502772] PCI: Using configuration type 1 for base access [ 0.505492] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.505667] ACPI: Added _OSI(Module Device) [ 0.505667] ACPI: Added _OSI(Processor Device) [ 0.505738] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.505854] ACPI: Added _OSI(Processor Aggregator Device) [ 0.536241] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.538232] xen: registering gsi 9 triggering 0 polarity 0 [ 0.541030] ACPI: Dynamic OEM Table Load: [ 0.549533] ACPI: Interpreter enabled [ 0.549665] ACPI: PM: (supports S0 S4 S5) [ 0.549777] ACPI: Using IOAPIC for interrupt routing [ 0.549923] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.550078] PCI: Using E820 reservations for host bridge windows [ 0.550688] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.577770] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.577915] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.578151] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.578412] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.578446] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.578622] PCI host bridge to bus 0000:ff [ 0.578734] pci_bus 0000:ff: root bus resource [bus ff] [ 0.578927] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.579374] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.579754] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.580177] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.580620] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.581042] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.581464] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.581886] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.582333] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.582762] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.583184] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.583609] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.584035] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.584460] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.584901] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.585321] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.585748] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.586176] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.586429] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.586787] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.587258] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.587728] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.588194] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.588665] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.589132] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.589591] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.590015] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.590445] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.590913] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.591378] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.591794] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.592252] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.592681] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.593104] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.593530] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.593962] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.594435] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.594902] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.595368] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.595846] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.596269] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.596695] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.597126] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.597374] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.597765] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.598192] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.598621] pci_bus 0000:ff: on NUMA node 0 [ 0.602923] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.603054] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.603330] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.603668] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.603788] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.604265] PCI host bridge to bus 0000:00 [ 0.604379] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.604445] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.604565] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.604709] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.604857] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.605047] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.605690] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.606210] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.606611] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.607130] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.607518] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.608040] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.608395] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.608841] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.609222] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.609746] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.610111] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.610633] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.611006] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.611583] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.612210] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.612879] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.613100] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.613560] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.613904] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.614121] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.614586] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.614889] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.615106] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.615575] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.615934] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.616130] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.616665] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.616983] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.617534] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.617733] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.617854] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.624615] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.625169] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.625364] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.625454] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.625756] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.626309] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.626504] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.626625] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.626909] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.627470] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.627664] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.627785] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.628108] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.628305] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.628844] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.629165] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.629917] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.630110] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.630268] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.630425] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.630487] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.630644] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.630801] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.631113] pci 0000:00:1f.2: PME# supported from D3hot [ 0.631395] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.631545] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.631789] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.632168] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.632390] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.633038] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.633331] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.633668] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.633902] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.634656] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.634869] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.635575] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.635788] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.636496] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.636708] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.637405] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.637464] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.637804] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.638016] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.638299] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.638485] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.638835] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.639055] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.639181] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.639384] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.639445] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.640016] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.640228] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.640513] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.640696] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.641043] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.641245] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.641366] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.641495] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.641616] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.642177] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.642311] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.642449] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.642739] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.643030] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.643405] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.643445] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.643651] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.643867] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.644031] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.644562] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.645025] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.645150] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.645278] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.645630] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.645749] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.645962] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.646178] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.646342] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.646856] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.647320] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.647445] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.647573] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.647911] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.648303] pci 0000:09:00.0: enabling Extended Tags [ 0.648646] pci 0000:09:00.0: supports D1 D2 [ 0.648760] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.649114] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.649240] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.649368] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.649627] pci_bus 0000:0a: extended config space not accessible [ 0.649798] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.650009] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.650176] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.650342] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.650682] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.650970] pci 0000:0a:00.0: supports D1 D2 [ 0.651083] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.651525] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.651663] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.651792] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.652179] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.652379] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.652539] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.652700] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.653220] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.653457] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.653601] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.653818] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.653968] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.654526] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.654727] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.654936] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.655096] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.655613] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.655842] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.655986] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.656202] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.656346] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.656814] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.657014] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.657223] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.657384] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.657837] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.658073] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.658217] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.658433] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.658577] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.659096] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.659296] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.659535] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.659696] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.660207] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.660435] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.660578] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.660799] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.660942] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.661525] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.661650] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.661778] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.661917] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.662387] pci_bus 0000:00: on NUMA node 0 [ 0.662487] xen: registering gsi 13 triggering 1 polarity 0 [ 0.663476] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.663672] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.663865] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.664055] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.664243] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.664360] ACPI: PCI: Interrupt link LNKE disabled [ 0.664518] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.664636] ACPI: PCI: Interrupt link LNKF disabled [ 0.664821] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.664939] ACPI: PCI: Interrupt link LNKG disabled [ 0.665122] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.665240] ACPI: PCI: Interrupt link LNKH disabled [ 0.665508] xen:balloon: Initialising balloon driver [ 0.665646] iommu: Default domain type: Translated [ 0.673447] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.673632] SCSI subsystem initialized [ 0.673760] libata version 3.00 loaded. [ 0.673760] ACPI: bus type USB registered [ 0.673760] usbcore: registered new interface driver usbfs [ 0.673760] usbcore: registered new interface driver hub [ 0.673852] usbcore: registered new device driver usb [ 0.673986] pps_core: LinuxPPS API ver. 1 registered [ 0.674446] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.674597] PTP clock support registered [ 0.674733] Advanced Linux Sound Architecture Driver Initialized. [ 0.674737] NetLabel: Initializing [ 0.674849] NetLabel: domain hash size = 128 [ 0.674961] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.675463] NetLabel: unlabeled traffic allowed by default [ 0.675603] PCI: Using ACPI for IRQ routing [ 0.710979] PCI: pci_cache_line_size set to 64 bytes [ 0.711757] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.711760] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.711783] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.711783] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.711783] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.711871] vgaarb: loaded [ 0.713444] clocksource: Switched to clocksource tsc-early [ 0.713481] VFS: Disk quotas dquot_6.6.0 [ 0.713820] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.713969] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.714127] pnp: PnP ACPI init [ 0.714608] xen: registering gsi 8 triggering 1 polarity 0 [ 0.714803] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.714928] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.715046] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.715164] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.715287] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.715411] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.715554] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.715677] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.715797] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.715917] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.716036] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.716155] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.716275] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.716708] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.716832] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.716950] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.717067] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.717185] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.717632] xen: registering gsi 4 triggering 1 polarity 0 [ 0.717637] Already setup the GSI :4 [ 0.717750] pnp 00:03: [dma 0 disabled] [ 0.718067] xen: registering gsi 3 triggering 1 polarity 0 [ 0.718079] pnp 00:04: [dma 0 disabled] [ 0.718693] pnp: PnP ACPI: found 5 devices [ 0.749949] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.750125] NET: Registered PF_INET protocol family [ 0.750286] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.750689] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.750842] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.750988] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.751138] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.751305] TCP: Hash tables configured (established 4096 bind 4096) [ 0.751509] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.751681] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.751837] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.752241] RPC: Registered named UNIX socket transport module. [ 0.752368] RPC: Registered udp transport module. [ 0.752500] RPC: Registered tcp transport module. [ 0.752613] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.753164] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.753335] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.753524] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.753688] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.753835] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.754009] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.754187] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.754321] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.754506] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.754638] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.754783] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.754925] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.755069] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.755191] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.755335] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.755497] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.755655] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.755777] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.755921] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.756064] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.756207] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.756329] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.756480] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.756638] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.756784] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.756924] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.757057] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.757227] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.757399] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.757602] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.757725] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.757863] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.758024] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.758143] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.758283] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.758463] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.758597] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.758740] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.758906] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.759025] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.759164] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.759328] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.759507] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.759680] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.759832] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.759984] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.760136] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.760288] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.760439] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.760618] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.760739] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.760878] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.761011] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.761189] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.761337] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.761470] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.761605] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.761727] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.761848] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.761966] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.762085] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.762228] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.762344] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.762487] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.762614] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.762733] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.762853] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.762971] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.763087] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.763205] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.763320] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.763439] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.764006] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.764229] xen: registering gsi 19 triggering 0 polarity 1 [ 0.764257] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.773145] xen: registering gsi 18 triggering 0 polarity 1 [ 0.773164] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.789792] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 16307 usecs [ 0.790036] xen: registering gsi 18 triggering 0 polarity 1 [ 0.790042] Already setup the GSI :18 [ 0.806837] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 16461 usecs [ 0.807052] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.807231] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.807319] Unpacking initramfs... [ 0.807353] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.807713] kvm: no hardware support for 'kvm_intel' [ 0.815477] has_svm: not amd or hygon [ 0.815616] kvm: no hardware support for 'kvm_amd' [ 0.815733] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.816146] clocksource: Switched to clocksource tsc [ 0.818800] Initialise system trusted keyrings [ 0.819129] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.820667] NFS: Registering the id_resolver key type [ 0.820795] Key type id_resolver registered [ 0.820905] Key type id_legacy registered [ 0.821119] 9p: Installing v9fs 9p2000 file system support [ 0.834737] Key type asymmetric registered [ 0.834864] Asymmetric key parser 'x509' registered [ 0.835006] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.835162] io scheduler mq-deadline registered [ 0.835275] io scheduler kyber registered [ 0.836044] xen: registering gsi 16 triggering 0 polarity 1 [ 0.836075] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.836662] xen: registering gsi 16 triggering 0 polarity 1 [ 0.836668] Already setup the GSI :16 [ 0.837257] xen: registering gsi 16 triggering 0 polarity 1 [ 0.837262] Already setup the GSI :16 [ 0.837602] xen: registering gsi 16 triggering 0 polarity 1 [ 0.837607] Already setup the GSI :16 [ 0.837933] xen: registering gsi 16 triggering 0 polarity 1 [ 0.837937] Already setup the GSI :16 [ 0.838524] xen: registering gsi 16 triggering 0 polarity 1 [ 0.838529] Already setup the GSI :16 [ 0.839101] xen: registering gsi 16 triggering 0 polarity 1 [ 0.839106] Already setup the GSI :16 [ 0.839559] xen: registering gsi 17 triggering 0 polarity 1 [ 0.839576] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.839920] xen: registering gsi 19 triggering 0 polarity 1 [ 0.839925] Already setup the GSI :19 [ 0.840364] xen: registering gsi 16 triggering 0 polarity 1 [ 0.840368] Already setup the GSI :16 [ 0.841046] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.841221] ACPI: button: Power Button [PWRB] [ 0.841365] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.841621] ACPI: button: Power Button [PWRF] [ 0.841906] Monitor-Mwait will be used to enter C-1 state [ 0.841942] Monitor-Mwait will be used to enter C-2 state [ 0.841959] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.842360] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.842746] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.843330] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.843683] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.844214] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.844608] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.845125] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.845967] xen:xen_evtchn: Event-channel device installed [ 0.846191] xen_pciback: backend is vpci [ 0.846954] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.847264] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.848044] hpet_acpi_add: no address or irqs in _CRS [ 0.848261] Non-volatile memory driver v1.3 [ 0.848374] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.850988] loop: module loaded [ 0.857655] ahci 0000:00:1f.2: version 3.0 [ 0.857756] xen: registering gsi 16 triggering 0 polarity 1 [ 0.857766] Already setup the GSI :16 [ 0.858093] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.858244] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.874093] scsi host0: ahci [ 0.874477] scsi host1: ahci [ 0.874848] scsi host2: ahci [ 0.875237] scsi host3: ahci [ 0.875614] scsi host4: ahci [ 0.875909] scsi host5: ahci [ 0.876053] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 0.876199] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 0.876342] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 0.876503] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 0.876660] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 0.876803] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 0.877287] tun: Universal TUN/TAP device driver, 1.6 [ 0.877554] e100: Intel(R) PRO/100 Network Driver [ 0.877674] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.877811] sky2: driver version 1.30 [ 0.878007] xen_netfront: Initialising Xen virtual ethernet driver [ 0.878368] xen: registering gsi 18 triggering 0 polarity 1 [ 0.878377] Already setup the GSI :18 [ 0.878606] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.878799] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.878975] ehci-pci 0000:00:1a.0: debug port 2 [ 0.883107] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.889514] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.889790] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.889938] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.890082] usb usb1: Product: EHCI Host Controller [ 0.890196] usb usb1: Manufacturer: Linux 6.1.109+ ehci_hcd [ 0.890312] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.890604] hub 1-0:1.0: USB hub found [ 0.890729] hub 1-0:1.0: 2 ports detected [ 0.891093] xen: registering gsi 18 triggering 0 polarity 1 [ 0.891102] Already setup the GSI :18 [ 0.891296] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.891510] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.891685] ehci-pci 0000:00:1d.0: debug port 2 [ 0.895788] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.902511] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.902751] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.902905] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.903048] usb usb2: Product: EHCI Host Controller [ 0.903162] usb usb2: Manufacturer: Linux 6.1.109+ ehci_hcd [ 0.903278] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.903556] hub 2-0:1.0: USB hub found [ 0.903681] hub 2-0:1.0: 2 ports detected [ 0.904111] xen: registering gsi 19 triggering 0 polarity 1 [ 0.904121] Already setup the GSI :19 [ 0.904332] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.904534] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.905751] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.906218] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.906416] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.906575] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.906781] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.906928] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.907076] usb usb3: Product: xHCI Host Controller [ 0.907190] usb usb3: Manufacturer: Linux 6.1.109+ xhci-hcd [ 0.907306] usb usb3: SerialNumber: 0000:00:14.0 [ 0.907614] hub 3-0:1.0: USB hub found [ 0.907746] hub 3-0:1.0: 8 ports detected [ 0.908907] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.909060] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.909203] usb usb4: Product: xHCI Host Controller [ 0.909316] usb usb4: Manufacturer: Linux 6.1.109+ xhci-hcd [ 0.909432] usb usb4: SerialNumber: 0000:00:14.0 [ 0.909698] hub 4-0:1.0: USB hub found [ 0.909836] hub 4-0:1.0: 6 ports detected [ 0.911010] usbcore: registered new interface driver usblp [ 0.911153] usbcore: registered new interface driver usb-storage [ 0.913137] Freeing initrd memory: 20624K [ 0.913401] i8042: PNP: No PS/2 controller found. [ 0.913744] rtc_cmos 00:00: RTC can wake from S4 [ 0.914399] rtc_cmos 00:00: registered as rtc0 [ 0.914570] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.914776] device-mapper: uevent: version 1.0.3 [ 0.914870] xen: registering gsi 18 triggering 0 polarity 1 [ 0.914898] Already setup the GSI :18 [ 0.915022] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.915047] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.915174] intel_pstate: CPU model not supported [ 0.915205] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.915307] hid: raw HID events driver (C) Jiri Kosina [ 0.915784] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.915812] usbcore: registered new interface driver usbhid [ 0.916020] usbhid: USB HID core driver [ 0.916699] Initializing XFRM netlink socket [ 0.916978] NET: Registered PF_INET6 protocol family [ 0.917578] Segment Routing with IPv6 [ 0.917701] In-situ OAM (IOAM) with IPv6 [ 0.917849] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.918125] NET: Registered PF_PACKET protocol family [ 0.918309] 9pnet: Installing 9P2000 support [ 0.918438] Key type dns_resolver registered [ 0.919170] IPI shorthand broadcast: enabled [ 0.919308] sched_clock: Marking stable (881672773, 37456144)->(1766426200, -847297283) [ 0.919867] registered taskstats version 1 [ 0.919982] Loading compiled-in X.509 certificates [ 0.922591] PM: Magic number: 8:454:251 [ 0.922774] acpi device:90: hash matches [ 0.922935] printk: console [netcon0] enabled [ 0.923049] netconsole: network logging started [ 0.923387] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.935227] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.935589] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.936251] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.936427] ALSA device list: [ 0.936567] No soundcards found. [ 1.126553] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.142618] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.150591] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.187333] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.187498] ata2: SATA link down (SStatus 0 SControl 300) [ 1.187636] ata6: SATA link down (SStatus 0 SControl 300) [ 1.187773] ata4: SATA link down (SStatus 0 SControl 300) [ 1.187927] ata1: SATA link down (SStatus 0 SControl 300) [ 1.188066] ata5: SATA link down (SStatus 0 SControl 300) [ 1.188494] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.254916] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.255074] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.255443] hub 1-1:1.0: USB hub found [ 1.255661] hub 1-1:1.0: 4 ports detected [ 1.270915] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.271068] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.271440] hub 2-1:1.0: USB hub found [ 1.271666] hub 2-1:1.0: 4 ports detected [ 1.275387] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.275628] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.278287] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.278577] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.278707] usb 3-3: Product: USB2.0 Hub [ 1.279497] hub 3-3:1.0: USB hub found [ 1.280011] hub 3-3:1.0: 4 ports detected [ 1.303318] ata3.00: configured for UDMA/133 [ 1.303753] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.304337] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.304421] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.304673] sd 2:0:0:0: [sda] Write Protect is off [ 1.304792] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.304820] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.305036] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.324420] sda: sda1 sda2 < sda5 > [ 1.324977] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.326189] Freeing unused kernel image (initmem) memory: 1580K [ 1.326317] Write protecting the kernel read-only data: 22528k [ 1.344122] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.345391] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.396519] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.522799] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.522953] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.523641] hub 3-4:1.0: USB hub found [ 1.523854] hub 3-4:1.0: 4 ports detected [ 1.586518] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.663984] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.664145] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.664289] usb 3-3.2: Product: USB2.0 Hub [ 1.664968] hub 3-3.2:1.0: USB hub found [ 1.665429] hub 3-3.2:1.0: 4 ports detected [ 1.801952] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.802078] Run /init as init process [ 1.802187] with arguments: [ 1.802188] /init [ 1.802189] placeholder [ 1.802190] with environment: [ 1.802191] HOME=/ [ 1.802192] TERM=linux [ 1.816524] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.921993] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.922180] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.928038] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 2.248166] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.248351] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.248828] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.249044] xen: registering gsi 16 triggering 0 polarity 1 [ 2.249053] Already setup the GSI :16 [ 2.252617] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.252741] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.252937] xen: registering gsi 16 triggering 0 polarity 1 [ 2.252944] Already setup the GSI :16 [ 2.272692] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 2.273970] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 2.274275] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.279627] pps pps0: new PPS source ptp0 [ 2.279841] igb 0000:07:00.0: added PHC on eth0 [ 2.279974] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.280094] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.280258] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.280373] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.280623] xen: registering gsi 17 triggering 0 polarity 1 [ 2.280632] Already setup the GSI :17 [ 2.310126] pps pps1: new PPS source ptp1 [ 2.310326] igb 0000:08:00.0: added PHC on eth1 [ 2.310478] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.310599] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.310764] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.310879] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.311145] xen: registering gsi 16 triggering 0 polarity 1 [ 2.311154] Already setup the GSI :16 [ 2.369327] igb 0000:0b:00.0: added PHC on eth2 [ 2.369480] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.369601] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.369804] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.369919] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.370178] xen: registering gsi 17 triggering 0 polarity 1 [ 2.370187] Already setup the GSI :17 [ 2.426407] igb 0000:0b:00.1: added PHC on eth3 [ 2.426562] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.426683] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.426895] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.427010] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.427240] xen: registering gsi 18 triggering 0 polarity 1 [ 2.427248] Already setup the GSI :18 [ 2.484701] igb 0000:0b:00.2: added PHC on eth4 [ 2.484843] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.484964] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.485197] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.485312] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.485571] xen: registering gsi 19 triggering 0 polarity 1 [ 2.485580] Already setup the GSI :19 [ 2.542932] igb 0000:0b:00.3: added PHC on eth5 [ 2.543073] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.543193] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.543403] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.543530] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.546249] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.556002] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.567760] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.577751] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.589832] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.599846] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 2.985159] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.113776] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.113934] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.410057] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.410449] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.410690] xen: registering gsi 17 triggering 0 polarity 1 [ 3.410701] Already setup the GSI :17 [ 4.148696] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.287085] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.287344] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.578422] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.581093] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.590156] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 5.000621] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.008843] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.692126] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.914644] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.936354] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 10.014523] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.569762] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.569934] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.570109] device enx0cc47a9f87be entered promiscuous mode [ 15.099106] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 15.308701] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 15.308949] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 15.309073] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 15.309353] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready