[ 0.000000] Linux version 6.1.109+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Wed Sep 11 21:09:28 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/godello1--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] Xen: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020060fff] usable [ 0.000000] Xen: [mem 0x000000009573f000-0x0000000095bbefff] reserved [ 0.000000] Xen: [mem 0x0000000095bbf000-0x0000000095fbefff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000095fbf000-0x0000000095ffefff] ACPI data [ 0.000000] Xen: [mem 0x0000000096000000-0x000000009fffffff] reserved [ 0.000000] Xen: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] Xen: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed90fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. PowerEdge R220/081N4V, BIOS 1.1.4 05/06/2014 [ 0.000000] Hypervisor detected: Xen PV [ 0.000463] tsc: Detected 3092.836 MHz processor [ 0.000790] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000793] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000799] last_pfn = 0x20061 max_arch_pfn = 0x400000000 [ 0.000801] Disabled [ 0.000803] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000807] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000852] Kernel/User page tables isolation: disabled on XEN PV. [ 0.021116] RAMDISK: [mem 0x04000000-0x05424fff] [ 0.021129] ACPI: Early table checksum verification disabled [ 0.022761] ACPI: RSDP 0x00000000000FE020 000024 (v02 DELL ) [ 0.022774] ACPI: XSDT 0x0000000095FCF188 0000E4 (v01 DELL PE_SC3 00000001 01000013) [ 0.022833] ACPI: FACP 0x0000000095FF7000 00010C (v05 DELL PE_SC3 00000001 DELL 00040000) [ 0.022913] ACPI: DSDT 0x0000000095FDF000 012335 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.022928] ACPI: FACS 0x0000000095FBD000 000040 [ 0.022942] ACPI: UEFI 0x0000000095FFD000 000236 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.022956] ACPI: UEFI 0x0000000095FFC000 000042 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.022969] ACPI: ASF! 0x0000000095FFB000 0000A5 (v32 DELL PE_SC3 00000001 DELL 00040000) [ 0.022983] ACPI: ASPT 0x0000000095FFA000 000034 (v07 DELL PE_SC3 00000001 DELL 00040000) [ 0.022997] ACPI: BOOT 0x0000000095FF9000 000028 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023011] ACPI: DBGP 0x0000000095FF8000 000034 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023025] ACPI: HPET 0x0000000095FF6000 000038 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023039] ACPI: APIC 0x0000000095FF5000 000092 (v03 DELL PE_SC3 00000001 DELL 00040000) [ 0.023052] ACPI: MCFG 0x0000000095FF4000 00003C (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023066] ACPI: SLIC 0x0000000095FF3000 000176 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023079] ACPI: SSDT 0x0000000095FDC000 002028 (v01 DELL PE_SC3 00001000 DELL 00040000) [ 0.023094] ACPI: SPMI 0x0000000095FDA000 000040 (v05 DELL PE_SC3 00000001 DELL 00040000) [ 0.023107] ACPI: SSDT 0x0000000095FD9000 000533 (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.023120] ACPI: SSDT 0x0000000095FD8000 000ACE (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.023133] ACPI: SSDT 0x0000000095FD4000 003492 (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.023147] ACPI: SPCR 0x0000000095FF2000 000050 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023161] ACPI: RMAD 0x0000000095FD3000 000080 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023174] ACPI: SSDT 0x0000000095FD2000 000514 (v01 DELL PE_SC3 00001000 DELL 00040000) [ 0.023188] ACPI: FPDT 0x0000000095FD1000 000044 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023202] ACPI: HEST 0x0000000095FD0000 0000A8 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023215] ACPI: ERST 0x0000000095FCE000 000230 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023228] ACPI: BERT 0x0000000095FCD000 000030 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023243] ACPI: EINJ 0x0000000095FCC000 000150 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023250] ACPI: Reserving FACP table memory at [mem 0x95ff7000-0x95ff710b] [ 0.023251] ACPI: Reserving DSDT table memory at [mem 0x95fdf000-0x95ff1334] [ 0.023253] ACPI: Reserving FACS table memory at [mem 0x95fbd000-0x95fbd03f] [ 0.023254] ACPI: Reserving UEFI table memory at [mem 0x95ffd000-0x95ffd235] [ 0.023255] ACPI: Reserving UEFI table memory at [mem 0x95ffc000-0x95ffc041] [ 0.023256] ACPI: Reserving ASF! table memory at [mem 0x95ffb000-0x95ffb0a4] [ 0.023256] ACPI: Reserving ASPT table memory at [mem 0x95ffa000-0x95ffa033] [ 0.023257] ACPI: Reserving BOOT table memory at [mem 0x95ff9000-0x95ff9027] [ 0.023258] ACPI: Reserving DBGP table memory at [mem 0x95ff8000-0x95ff8033] [ 0.023259] ACPI: Reserving HPET table memory at [mem 0x95ff6000-0x95ff6037] [ 0.023260] ACPI: Reserving APIC table memory at [mem 0x95ff5000-0x95ff5091] [ 0.023260] ACPI: Reserving MCFG table memory at [mem 0x95ff4000-0x95ff403b] [ 0.023261] ACPI: Reserving SLIC table memory at [mem 0x95ff3000-0x95ff3175] [ 0.023262] ACPI: Reserving SSDT table memory at [mem 0x95fdc000-0x95fde027] [ 0.023263] ACPI: Reserving SPMI table memory at [mem 0x95fda000-0x95fda03f] [ 0.023263] ACPI: Reserving SSDT table memory at [mem 0x95fd9000-0x95fd9532] [ 0.023264] ACPI: Reserving SSDT table memory at [mem 0x95fd8000-0x95fd8acd] [ 0.023265] ACPI: Reserving SSDT table memory at [mem 0x95fd4000-0x95fd7491] [ 0.023265] ACPI: Reserving SPCR table memory at [mem 0x95ff2000-0x95ff204f] [ 0.023266] ACPI: Reserving RMAD table memory at [mem 0x95fd3000-0x95fd307f] [ 0.023267] ACPI: Reserving SSDT table memory at [mem 0x95fd2000-0x95fd2513] [ 0.023268] ACPI: Reserving FPDT table memory at [mem 0x95fd1000-0x95fd1043] [ 0.023269] ACPI: Reserving HEST table memory at [mem 0x95fd0000-0x95fd00a7] [ 0.023269] ACPI: Reserving ERST table memory at [mem 0x95fce000-0x95fce22f] [ 0.023270] ACPI: Reserving BERT table memory at [mem 0x95fcd000-0x95fcd02f] [ 0.023271] ACPI: Reserving EINJ table memory at [mem 0x95fcc000-0x95fcc14f] [ 0.023332] Setting APIC routing to Xen PV. [ 0.026373] Zone ranges: [ 0.026376] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.026378] DMA32 [mem 0x0000000001000000-0x0000000020060fff] [ 0.026380] Normal empty [ 0.026382] Movable zone start for each node [ 0.026382] Early memory node ranges [ 0.026383] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.026384] node 0: [mem 0x0000000000100000-0x0000000020060fff] [ 0.026386] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020060fff] [ 0.026394] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.026473] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.029857] On node 0, zone DMA32: 32671 pages in unavailable ranges [ 0.029862] p2m virtual area at (____ptrval____), size is 40000000 [ 0.166009] Remapped 97 page(s) [ 0.166710] ACPI: PM-Timer IO Port: 0x1808 [ 0.166768] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.166807] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.166822] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.166828] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.166857] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.166862] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.166872] ACPI: SPCR: SPCR table version 1 [ 0.166875] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.166930] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.166950] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.166952] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.166954] [mem 0x20061000-0x9573efff] available for PCI devices [ 0.166959] Booting kernel on Xen [ 0.166960] Xen version: 4.20-unstable (preserve-AD) [ 0.166965] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.172322] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.172833] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u524288 [ 0.172840] pcpu-alloc: s180520 r8192 d32472 u524288 alloc=1*2097152 [ 0.172843] pcpu-alloc: [0] 0 1 2 3 [ 0.172925] xen: PV spinlocks enabled [ 0.172932] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.172940] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.172943] Kernel command line: placeholder root=/dev/mapper/godello1--vg-root ro console=hvc0 [ 0.173011] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.173032] random: crng init done [ 0.173109] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.173149] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.173751] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.173757] software IO TLB: area num 4. [ 0.248977] Memory: 390152K/524284K available (14349K kernel code, 2686K rwdata, 4576K rodata, 1580K init, 1288K bss, 133880K reserved, 0K cma-reserved) [ 0.249111] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.251427] Dynamic Preempt: voluntary [ 0.251498] rcu: Preemptible hierarchical RCU implementation. [ 0.251499] rcu: RCU event tracing is enabled. [ 0.251500] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.251501] Trampoline variant of Tasks RCU enabled. [ 0.251503] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.251504] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.259212] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.259325] xen:events: Using FIFO-based ABI [ 0.259351] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.259357] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.259362] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.259368] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.259373] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.259383] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.259388] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.259393] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.259399] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.259404] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.259409] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.259414] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.259420] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.259425] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.259431] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.259441] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.268557] Console: colour VGA+ 80x25 [ 0.287862] printk: console [tty0] enabled [ 0.288907] printk: console [hvc0] enabled [ 0.289062] ACPI: Core revision 20220331 [ 0.309330] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.309535] Xen: using vcpuop timer interface [ 0.309547] installing Xen timer for CPU 0 [ 0.309736] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c94d83b270, max_idle_ns: 440795286026 ns [ 0.309928] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.67 BogoMIPS (lpj=3092836) [ 0.310262] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.310409] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.310564] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.310938] Spectre V2 : Mitigation: Retpolines [ 0.311079] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.311256] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.311401] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.311548] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.311725] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.311867] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.311933] MDS: Mitigation: Clear CPU buffers [ 0.312072] MMIO Stale Data: Unknown: No mitigations [ 0.312294] SRBDS: Unknown: Dependent on hypervisor status [ 0.312456] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.312629] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.312774] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.312914] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.312929] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.330700] Freeing SMP alternatives memory: 40K [ 0.330867] pid_max: default: 32768 minimum: 301 [ 0.330957] LSM: Security Framework initializing [ 0.331105] SELinux: Initializing. [ 0.331282] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.331458] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.332040] cpu 0 spinlock event irq 25 [ 0.332180] VPMU disabled by hypervisor. [ 0.332587] cblist_init_generic: Setting adjustable number of callback queues. [ 0.332763] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.332942] Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only. [ 0.333124] signal: max sigframe size: 1776 [ 0.333305] rcu: Hierarchical SRCU implementation. [ 0.333450] rcu: Max phase no-delay instances is 400. [ 0.333908] smp: Bringing up secondary CPUs ... [ 0.334103] installing Xen timer for CPU 1 [ 0.334529] cpu 1 spinlock event irq 35 [ 0.335043] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.335409] installing Xen timer for CPU 2 [ 0.336079] cpu 2 spinlock event irq 41 [ 0.336113] installing Xen timer for CPU 3 [ 0.336519] cpu 3 spinlock event irq 47 [ 0.337038] smp: Brought up 1 node, 4 CPUs [ 0.337179] smpboot: Max logical packages: 1 [ 0.337429] devtmpfs: initialized [ 0.337429] x86/mm: Memory block size: 128MB [ 0.338095] ACPI: PM: Registering ACPI NVS region [mem 0x95bbf000-0x95fbefff] (4194304 bytes) [ 0.338221] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.338499] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.338998] PM: RTC time: 22:21:03, date: 2024-09-11 [ 0.339238] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.339400] xen:grant_table: Grant tables using version 1 layout [ 0.339560] Grant table initialized [ 0.339798] audit: initializing netlink subsys (disabled) [ 0.339950] audit: type=2000 audit(1726093263.915:1): state=initialized audit_enabled=0 res=1 [ 0.339983] thermal_sys: Registered thermal governor 'step_wise' [ 0.339983] thermal_sys: Registered thermal governor 'user_space' [ 0.340143] Simple Boot Flag at 0x44 set to 0x1 [ 0.340445] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.341003] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.341190] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 0.386046] PCI: Using configuration type 1 for base access [ 0.386368] PCI: Dell System detected, enabling pci=bfsort. [ 0.388596] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.389019] ACPI: Added _OSI(Module Device) [ 0.389120] ACPI: Added _OSI(Processor Device) [ 0.389258] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.389932] ACPI: Added _OSI(Processor Aggregator Device) [ 0.403833] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.404557] xen: registering gsi 9 triggering 0 polarity 0 [ 0.405024] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.409386] ACPI: Dynamic OEM Table Load: [ 0.409534] ACPI: SSDT 0xFFFF88800358A800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120816) [ 0.410647] ACPI: Dynamic OEM Table Load: [ 0.410791] ACPI: SSDT 0xFFFF8880036F6000 0005AA (v01 PmRef ApIst 00003000 INTL 20120816) [ 0.411562] ACPI: Dynamic OEM Table Load: [ 0.411704] ACPI: SSDT 0xFFFF888003552C00 000119 (v01 PmRef ApCst 00003000 INTL 20120816) [ 0.412987] ACPI: Interpreter enabled [ 0.413143] ACPI: PM: (supports S0 S4 S5) [ 0.413279] ACPI: Using IOAPIC for interrupt routing [ 0.413439] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.413619] PCI: Using E820 reservations for host bridge windows [ 0.414018] ACPI: Enabled 11 GPEs in block 00 to 3F [ 0.419935] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1) [ 0.427806] ACPI: PM: Power Resource [FN00] [ 0.427969] ACPI: PM: Power Resource [FN01] [ 0.428143] ACPI: PM: Power Resource [FN02] [ 0.428315] ACPI: PM: Power Resource [FN03] [ 0.428487] ACPI: PM: Power Resource [FN04] [ 0.429324] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) [ 0.429474] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.430497] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability LTR] [ 0.430645] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.431300] PCI host bridge to bus 0000:00 [ 0.431445] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.431594] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.431735] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.431908] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff window] [ 0.431930] pci_bus 0000:00: root bus resource [bus 00-7e] [ 0.432108] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000 [ 0.432637] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.432855] pci 0000:00:14.0: reg 0x10: [mem 0xa2b00000-0xa2b0ffff 64bit] [ 0.433200] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.433564] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.433763] pci 0000:00:1a.0: reg 0x10: [mem 0xa2b12000-0xa2b123ff] [ 0.434216] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.434542] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.435048] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.435265] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.435404] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.435896] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 [ 0.436286] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.436505] pci 0000:00:1c.2: Enabling MPC IRBNCE [ 0.436648] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled [ 0.437153] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.437359] pci 0000:00:1d.0: reg 0x10: [mem 0xa2b11000-0xa2b113ff] [ 0.437819] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.438124] pci 0000:00:1f.0: [8086:8c52] type 00 class 0x060100 [ 0.438773] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.438968] pci 0000:00:1f.2: reg 0x10: [io 0x3048-0x304f] [ 0.439138] pci 0000:00:1f.2: reg 0x14: [io 0x3054-0x3057] [ 0.439308] pci 0000:00:1f.2: reg 0x18: [io 0x3040-0x3047] [ 0.439480] pci 0000:00:1f.2: reg 0x1c: [io 0x3050-0x3053] [ 0.439650] pci 0000:00:1f.2: reg 0x20: [io 0x3020-0x303f] [ 0.439821] pci 0000:00:1f.2: reg 0x24: [mem 0xa2b10000-0xa2b107ff] [ 0.440099] pci 0000:00:1f.2: PME# supported from D3hot [ 0.440393] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.440609] pci 0000:00:1f.3: reg 0x10: [mem 0xa2b13000-0xa2b130ff 64bit] [ 0.440843] pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f] [ 0.441364] pci 0000:01:00.0: [14e4:165f] type 00 class 0x020000 [ 0.441663] pci 0000:01:00.0: reg 0x10: [mem 0xa2a30000-0xa2a3ffff 64bit pref] [ 0.441955] pci 0000:01:00.0: reg 0x18: [mem 0xa2a40000-0xa2a4ffff 64bit pref] [ 0.442240] pci 0000:01:00.0: reg 0x20: [mem 0xa2a50000-0xa2a5ffff 64bit pref] [ 0.442498] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 0.443167] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.444017] pci 0000:01:00.1: [14e4:165f] type 00 class 0x020000 [ 0.444316] pci 0000:01:00.1: reg 0x10: [mem 0xa2a00000-0xa2a0ffff 64bit pref] [ 0.444614] pci 0000:01:00.1: reg 0x18: [mem 0xa2a10000-0xa2a1ffff 64bit pref] [ 0.444909] pci 0000:01:00.1: reg 0x20: [mem 0xa2a20000-0xa2a2ffff 64bit pref] [ 0.445025] pci 0000:01:00.1: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 0.445636] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold [ 0.446511] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.446686] pci 0000:00:1c.0: bridge window [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.447407] pci 0000:02:00.0: [1912:0013] type 01 class 0x060400 [ 0.450508] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.452125] pci 0000:00:1c.2: PCI bridge to [bus 02-06] [ 0.452284] pci 0000:00:1c.2: bridge window [mem 0xa2000000-0xa29fffff] [ 0.452450] pci 0000:00:1c.2: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.453929] pci 0000:03:00.0: [1912:0013] type 01 class 0x060400 [ 0.457399] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.459230] pci 0000:03:01.0: [1912:0013] type 01 class 0x060400 [ 0.462920] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold [ 0.466537] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 0.466875] pci 0000:02:00.0: bridge window [mem 0xa2000000-0xa29fffff] [ 0.467067] pci 0000:02:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.468560] pci 0000:04:00.0: [1912:0012] type 01 class 0x060400 [ 0.473319] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 0.473680] pci 0000:03:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.473971] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.475225] pci_bus 0000:05: extended config space not accessible [ 0.475610] pci 0000:05:00.0: [102b:0534] type 00 class 0x030000 [ 0.476225] pci 0000:05:00.0: reg 0x10: [mem 0xa1000000-0xa1ffffff pref] [ 0.477187] pci 0000:05:00.0: reg 0x14: [mem 0xa2800000-0xa2803fff] [ 0.477592] pci 0000:05:00.0: reg 0x18: [mem 0xa2000000-0xa27fffff] [ 0.479050] pci 0000:05:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.482522] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.482880] pci 0000:04:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.483084] pci 0000:04:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.484866] pci 0000:06:00.0: [1912:0011] type 00 class 0x050000 [ 0.485435] pci 0000:06:00.0: reg 0x10: [mem 0xa2901000-0xa2901fff] [ 0.485846] pci 0000:06:00.0: reg 0x14: [mem 0xa2900000-0xa290007f] [ 0.488240] pci 0000:06:00.0: PME# supported from D3hot [ 0.489086] pci 0000:03:01.0: PCI bridge to [bus 06] [ 0.489444] pci 0000:03:01.0: bridge window [mem 0xa2900000-0xa29fffff] [ 0.490716] pci_bus 0000:00: on NUMA node 0 [ 0.490914] xen: registering gsi 13 triggering 1 polarity 0 [ 0.491912] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.492011] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.492226] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.492447] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.492661] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.492798] ACPI: PCI: Interrupt link LNKE disabled [ 0.493008] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.493151] ACPI: PCI: Interrupt link LNKF disabled [ 0.493350] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.493492] ACPI: PCI: Interrupt link LNKG disabled [ 0.493706] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.495437] xen:balloon: Initialising balloon driver [ 0.495593] iommu: Default domain type: Translated [ 0.495593] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.495980] SCSI subsystem initialized [ 0.496127] libata version 3.00 loaded. [ 0.496127] ACPI: bus type USB registered [ 0.496127] usbcore: registered new interface driver usbfs [ 0.496259] usbcore: registered new interface driver hub [ 0.496402] usbcore: registered new device driver usb [ 0.496550] pps_core: LinuxPPS API ver. 1 registered [ 0.496932] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.497129] PTP clock support registered [ 0.497283] Advanced Linux Sound Architecture Driver Initialized. [ 0.497283] NetLabel: Initializing [ 0.497335] NetLabel: domain hash size = 128 [ 0.497478] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.497945] NetLabel: unlabeled traffic allowed by default [ 0.498103] PCI: Using ACPI for IRQ routing [ 0.514408] PCI: pci_cache_line_size set to 64 bytes [ 0.515027] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.515030] e820: reserve RAM buffer [mem 0x20061000-0x23ffffff] [ 0.515093] pci 0000:05:00.0: vgaarb: setting as boot VGA device [ 0.515238] pci 0000:05:00.0: vgaarb: bridge control possible [ 0.515380] pci 0000:05:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.515556] vgaarb: loaded [ 0.517208] clocksource: Switched to clocksource tsc-early [ 0.517402] VFS: Disk quotas dquot_6.6.0 [ 0.517544] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.517705] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.517909] pnp: PnP ACPI init [ 0.517909] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.518048] system 00:00: [io 0xffff] has been reserved [ 0.518185] system 00:00: [io 0xffff] has been reserved [ 0.518324] system 00:00: [io 0xffff] has been reserved [ 0.518463] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.518605] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.518773] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.518963] xen: registering gsi 8 triggering 1 polarity 0 [ 0.519015] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.519464] xen: registering gsi 3 triggering 1 polarity 0 [ 0.519735] xen: registering gsi 4 triggering 1 polarity 0 [ 0.519738] Already setup the GSI :4 [ 0.520068] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.520215] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.520361] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.520506] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.520656] system 00:06: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.520801] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.520955] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.521096] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved [ 0.521242] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.521393] system 00:06: [mem 0xa0000000-0xa0000fff] has been reserved [ 0.521537] system 00:06: [mem 0xa0020000-0xa002ffff] has been reserved [ 0.522548] pnp: PnP ACPI: found 7 devices [ 0.544253] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.544420] NET: Registered PF_INET protocol family [ 0.544588] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.544916] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.545103] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.545290] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.545487] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.545676] TCP: Hash tables configured (established 4096 bind 4096) [ 0.545835] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.545989] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.546154] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.546477] RPC: Registered named UNIX socket transport module. [ 0.546627] RPC: Registered udp transport module. [ 0.546765] RPC: Registered tcp transport module. [ 0.546904] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.547329] clipped [mem size 0x00020000] to [mem size 0xfffffffffffc0000] for e820 entry [mem 0x0009f000-0x000fffff] [ 0.547511] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0100000-0xa01fffff] [ 0.547659] pci 0000:01:00.0: BAR 6: assigned [mem 0xa0100000-0xa013ffff pref] [ 0.547833] pci 0000:01:00.1: BAR 6: assigned [mem 0xa0140000-0xa017ffff pref] [ 0.548012] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.548160] pci 0000:00:1c.0: bridge window [mem 0xa0100000-0xa01fffff] [ 0.548314] pci 0000:00:1c.0: bridge window [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.548538] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.548822] pci 0000:04:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.549070] pci 0000:04:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.549442] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 0.549723] pci 0000:03:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.549968] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.550372] pci 0000:03:01.0: PCI bridge to [bus 06] [ 0.550652] pci 0000:03:01.0: bridge window [mem 0xa2900000-0xa29fffff] [ 0.551159] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 0.551440] pci 0000:02:00.0: bridge window [mem 0xa2000000-0xa29fffff] [ 0.551735] pci 0000:02:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.552168] pci 0000:00:1c.2: PCI bridge to [bus 02-06] [ 0.552322] pci 0000:00:1c.2: bridge window [mem 0xa2000000-0xa29fffff] [ 0.552477] pci 0000:00:1c.2: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.552669] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.552811] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.552959] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.553098] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff window] [ 0.553279] pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa01fffff] [ 0.553423] pci_bus 0000:01: resource 2 [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.553595] pci_bus 0000:02: resource 1 [mem 0xa2000000-0xa29fffff] [ 0.553738] pci_bus 0000:02: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.553906] pci_bus 0000:03: resource 1 [mem 0xa2000000-0xa29fffff] [ 0.554053] pci_bus 0000:03: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.554220] pci_bus 0000:04: resource 1 [mem 0xa2000000-0xa28fffff] [ 0.554363] pci_bus 0000:04: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.554534] pci_bus 0000:05: resource 1 [mem 0xa2000000-0xa28fffff] [ 0.554712] pci_bus 0000:05: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.554884] pci_bus 0000:06: resource 1 [mem 0xa2900000-0xa29fffff] [ 0.555161] xen: registering gsi 16 triggering 0 polarity 1 [ 0.555179] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.556662] xen: registering gsi 16 triggering 0 polarity 1 [ 0.556666] Already setup the GSI :16 [ 0.570059] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 13131 usecs [ 0.570346] xen: registering gsi 23 triggering 0 polarity 1 [ 0.570361] xen: --> pirq=23 -> irq=23 (gsi=23) [ 0.583022] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 12462 usecs [ 0.583507] PCI: CLS 64 bytes, default 64 [ 0.583679] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.583723] Unpacking initramfs... [ 0.583825] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.584227] kvm: no hardware support for 'kvm_intel' [ 0.584404] has_svm: not amd or hygon [ 0.584538] kvm: no hardware support for 'kvm_amd' [ 0.584679] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c94d83b270, max_idle_ns: 440795286026 ns [ 0.584908] clocksource: Switched to clocksource tsc [ 0.594741] Initialise system trusted keyrings [ 0.594964] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.596093] NFS: Registering the id_resolver key type [ 0.596243] Key type id_resolver registered [ 0.596382] Key type id_legacy registered [ 0.596583] 9p: Installing v9fs 9p2000 file system support [ 0.606914] Key type asymmetric registered [ 0.607057] Asymmetric key parser 'x509' registered [ 0.607211] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.607392] io scheduler mq-deadline registered [ 0.607574] io scheduler kyber registered [ 0.608075] xen: registering gsi 16 triggering 0 polarity 1 [ 0.608082] Already setup the GSI :16 [ 0.608412] pcieport 0000:00:1c.0: PME: Signaling with IRQ 50 [ 0.608803] xen: registering gsi 18 triggering 0 polarity 1 [ 0.608818] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.608997] pcieport 0000:00:1c.2: PME: Signaling with IRQ 51 [ 0.613497] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.613777] ACPI: button: Power Button [PWRF] [ 0.614313] Monitor-Mwait will be used to enter C-1 state [ 0.614347] Monitor-Mwait will be used to enter C-2 state [ 0.614361] ACPI: \_PR_.CPU0: Found 2 idle states [ 0.614718] ACPI: \_PR_.CPU1: Found 2 idle states [ 0.626727] ACPI: \_PR_.CPU2: Found 2 idle states [ 0.627091] ACPI: \_PR_.CPU3: Found 2 idle states [ 0.627649] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.627832] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.628188] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.628333] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.628769] xen:xen_evtchn: Event-channel device installed [ 0.628982] xen_pciback: backend is vpci [ 0.629553] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.629796] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.630430] hpet_acpi_add: no address or irqs in _CRS [ 0.630631] Non-volatile memory driver v1.3 [ 0.630771] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.632273] loop: module loaded [ 0.635802] ahci 0000:00:1f.2: version 3.0 [ 0.635893] xen: registering gsi 19 triggering 0 polarity 1 [ 0.635913] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.636074] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.636259] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode [ 0.636437] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 0.642940] scsi host0: ahci [ 0.643299] scsi host1: ahci [ 0.643589] scsi host2: ahci [ 0.643865] scsi host3: ahci [ 0.644121] scsi host4: ahci [ 0.644380] scsi host5: ahci [ 0.644558] ata1: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10100 irq 53 [ 0.644733] ata2: DUMMY [ 0.644867] ata3: DUMMY [ 0.644996] ata4: DUMMY [ 0.645126] ata5: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10300 irq 53 [ 0.645301] ata6: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10380 irq 53 [ 0.645652] tun: Universal TUN/TAP device driver, 1.6 [ 0.645966] xen: registering gsi 16 triggering 0 polarity 1 [ 0.645972] Already setup the GSI :16 [ 0.654738] Freeing initrd memory: 20628K [ 0.680049] tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 54:9f:35:05:fd:88 [ 0.680238] tg3 0000:01:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 0.680421] tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 0.680609] tg3 0000:01:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 0.681160] xen: registering gsi 17 triggering 0 polarity 1 [ 0.681183] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.728272] tg3 0000:01:00.1 eth1: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 54:9f:35:05:fd:8a [ 0.728462] tg3 0000:01:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 0.728653] tg3 0000:01:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 0.728828] tg3 0000:01:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit] [ 0.729281] e100: Intel(R) PRO/100 Network Driver [ 0.729424] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.729579] sky2: driver version 1.30 [ 0.729743] xen_netfront: Initialising Xen virtual ethernet driver [ 0.730051] xen: registering gsi 16 triggering 0 polarity 1 [ 0.730056] Already setup the GSI :16 [ 0.730248] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.730455] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.730673] ehci-pci 0000:00:1a.0: debug port 2 [ 0.734802] ehci-pci 0000:00:1a.0: irq 16, io mem 0xa2b12000 [ 0.741507] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.741714] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.741883] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.742050] usb usb1: Product: EHCI Host Controller [ 0.742189] usb usb1: Manufacturer: Linux 6.1.109+ ehci_hcd [ 0.742331] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.742646] hub 1-0:1.0: USB hub found [ 0.742797] hub 1-0:1.0: 2 ports detected [ 0.743166] xen: registering gsi 23 triggering 0 polarity 1 [ 0.743171] Already setup the GSI :23 [ 0.743359] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.743599] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.743804] ehci-pci 0000:00:1d.0: debug port 2 [ 0.747920] ehci-pci 0000:00:1d.0: irq 23, io mem 0xa2b11000 [ 0.754542] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.754795] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.754973] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.755141] usb usb2: Product: EHCI Host Controller [ 0.755284] usb usb2: Manufacturer: Linux 6.1.109+ ehci_hcd [ 0.755420] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.755718] hub 2-0:1.0: USB hub found [ 0.755868] hub 2-0:1.0: 2 ports detected [ 0.756251] xen: registering gsi 16 triggering 0 polarity 1 [ 0.756255] Already setup the GSI :16 [ 0.756453] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.756707] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.757974] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.758417] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.758634] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.758810] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.759019] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.759196] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.759368] usb usb3: Product: xHCI Host Controller [ 0.759517] usb usb3: Manufacturer: Linux 6.1.109+ xhci-hcd [ 0.759658] usb usb3: SerialNumber: 0000:00:14.0 [ 0.759942] hub 3-0:1.0: USB hub found [ 0.760102] hub 3-0:1.0: 10 ports detected [ 0.763438] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.763626] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.763799] usb usb4: Product: xHCI Host Controller [ 0.763938] usb usb4: Manufacturer: Linux 6.1.109+ xhci-hcd [ 0.764080] usb usb4: SerialNumber: 0000:00:14.0 [ 0.764404] hub 4-0:1.0: USB hub found [ 0.764578] hub 4-0:1.0: 2 ports detected [ 0.765125] usbcore: registered new interface driver usblp [ 0.765280] usbcore: registered new interface driver usb-storage [ 0.765463] i8042: PNP: No PS/2 controller found. [ 0.765721] rtc_cmos 00:02: RTC can wake from S4 [ 0.766309] rtc_cmos 00:02: registered as rtc0 [ 0.766511] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram [ 0.766695] device-mapper: uevent: version 1.0.3 [ 0.766758] xen: registering gsi 18 triggering 0 polarity 1 [ 0.766838] Already setup the GSI :18 [ 0.766923] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.767086] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.767149] intel_pstate: CPU model not supported [ 0.767434] hid: raw HID events driver (C) Jiri Kosina [ 0.767680] usbcore: registered new interface driver usbhid [ 0.767821] usbhid: USB HID core driver [ 0.768284] Initializing XFRM netlink socket [ 0.768515] NET: Registered PF_INET6 protocol family [ 0.769014] Segment Routing with IPv6 [ 0.769163] In-situ OAM (IOAM) with IPv6 [ 0.769338] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.769573] NET: Registered PF_PACKET protocol family [ 0.769746] 9pnet: Installing 9P2000 support [ 0.769890] Key type dns_resolver registered [ 0.770234] IPI shorthand broadcast: enabled [ 0.770390] sched_clock: Marking stable (719721820, 50481433)->(789000387, -18797134) [ 0.770850] registered taskstats version 1 [ 0.770989] Loading compiled-in X.509 certificates [ 0.771882] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.772537] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.772584] PM: Magic number: 8:4:401 [ 0.772885] printk: console [netcon0] enabled [ 0.773025] netconsole: network logging started [ 0.773351] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.781618] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.781926] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.782478] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.782692] ALSA device list: [ 0.782833] No soundcards found. [ 0.956874] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.984544] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.992542] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.000535] usb 3-9: new high-speed USB device number 2 using xhci_hcd [ 1.004950] ata1.00: ATA-8: TOSHIBA MG03ACA100, FL1D, max UDMA/100 [ 1.005803] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.006998] ata1.00: configured for UDMA/100 [ 1.007288] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MG03ACA1 FL1D PQ: 0 ANSI: 5 [ 1.007964] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.007990] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.008301] sd 0:0:0:0: [sda] Write Protect is off [ 1.008445] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.008499] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.008746] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.113235] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.113405] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.113879] hub 1-1:1.0: USB hub found [ 1.114193] hub 1-1:1.0: 4 ports detected [ 1.125740] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.125916] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.126276] hub 2-1:1.0: USB hub found [ 1.126501] hub 2-1:1.0: 6 ports detected [ 1.137533] usb 3-9: New USB device found, idVendor=0624, idProduct=0248, bcdDevice= 0.00 [ 1.137708] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.137850] usb 3-9: Product: Gadget USB HUB [ 1.137985] usb 3-9: Manufacturer: no manufacturer [ 1.138116] usb 3-9: SerialNumber: 0123456789 [ 1.139071] hub 3-9:1.0: USB hub found [ 1.139302] hub 3-9:1.0: 6 ports detected [ 1.196818] sda: sda1 sda2 < sda5 > [ 1.197311] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.316542] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.319371] ata5.00: ATAPI: HL-DT-ST DVD+/-RW GTA0N, A3B0, max UDMA/100 [ 1.324151] ata5.00: configured for UDMA/100 [ 1.329314] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD+-RW GTA0N A3B0 PQ: 0 ANSI: 5 [ 1.369058] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.369241] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.388906] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.389010] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 1.432541] usb 3-9.1: new high-speed USB device number 3 using xhci_hcd [ 1.519786] usb 3-9.1: New USB device found, idVendor=0624, idProduct=0249, bcdDevice= 0.00 [ 1.519968] usb 3-9.1: New USB device strings: Mfr=4, Product=5, SerialNumber=6 [ 1.520142] usb 3-9.1: Product: Keyboard/Mouse Function [ 1.520278] usb 3-9.1: Manufacturer: Avocent [ 1.520420] usb 3-9.1: SerialNumber: 20120917 [ 1.527358] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/0003:0624:0249.0001/input/input1 [ 1.579642] hid-generic 0003:0624:0249.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input0 [ 1.580840] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/0003:0624:0249.0002/input/input2 [ 1.581088] hid-generic 0003:0624:0249.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input1 [ 1.582170] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.2/0003:0624:0249.0003/input/input3 [ 1.582412] hid-generic 0003:0624:0249.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input2 [ 1.700692] ata6: SATA link down (SStatus 0 SControl 300) [ 1.701621] Freeing unused kernel image (initmem) memory: 1580K [ 1.701768] Write protecting the kernel read-only data: 22528k [ 1.714742] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.715659] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.915274] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.915423] Run /init as init process [ 1.915565] with arguments: [ 1.915565] /init [ 1.915566] placeholder [ 1.915567] with environment: [ 1.915568] HOME=/ [ 1.915568] TERM=linux [ 2.144019] tg3 0000:01:00.1 enx549f3505fd8a: renamed from eth1 [ 2.146882] tg3 0000:01:00.0 enx549f3505fd88: renamed from eth0 [ 2.904527] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.146873] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 6.535926] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 7.531955] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 7.540339] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 7.597574] Adding 1949692k swap on /dev/mapper/godello1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 9.112832] xenbr0: port 1(enx549f3505fd88) entered blocking state [ 9.113020] xenbr0: port 1(enx549f3505fd88) entered disabled state [ 9.113199] device enx549f3505fd88 entered promiscuous mode [ 12.800580] tg3 0000:01:00.0 enx549f3505fd88: Link is up at 1000 Mbps, full duplex [ 12.800795] tg3 0000:01:00.0 enx549f3505fd88: Flow control is off for TX and off for RX [ 12.800970] tg3 0000:01:00.0 enx549f3505fd88: EEE is disabled [ 12.801193] IPv6: ADDRCONF(NETDEV_CHANGE): enx549f3505fd88: link becomes ready [ 12.801386] xenbr0: port 1(enx549f3505fd88) entered blocking state [ 12.801550] xenbr0: port 1(enx549f3505fd88) entered forwarding state [ 12.801719] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready