[ 0.000000] Linux version 6.1.109+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Thu Sep 12 01:45:00 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000458] tsc: Detected 2199.996 MHz processor [ 0.000898] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000902] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000909] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000910] Disabled [ 0.000911] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000915] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000954] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027421] RAMDISK: [mem 0x04000000-0x05423fff] [ 0.027428] ACPI: Early table checksum verification disabled [ 0.028027] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028039] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028075] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028124] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028140] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028156] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028172] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028188] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028204] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028220] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028237] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028253] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028269] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028285] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028302] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028318] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028334] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028350] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028366] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028382] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028398] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028414] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028423] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028424] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028426] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028427] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028428] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028428] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028429] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028430] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028431] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028432] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028433] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028434] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028435] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028436] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028437] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028438] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028439] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028440] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028441] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028442] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028487] Setting APIC routing to Xen PV. [ 0.032421] Zone ranges: [ 0.032422] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032425] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032427] Normal empty [ 0.032428] Movable zone start for each node [ 0.032428] Early memory node ranges [ 0.032429] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032431] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032432] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032437] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032473] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034028] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034032] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221527] Remapped 102 page(s) [ 0.222898] ACPI: PM-Timer IO Port: 0x408 [ 0.222951] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.222954] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.222956] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.222957] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.222959] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.222960] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.222962] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.222963] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.222992] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223005] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223009] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223035] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223040] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223108] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223123] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223125] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223127] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223129] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223134] Booting kernel on Xen [ 0.223135] Xen version: 4.20-unstable (preserve-AD) [ 0.223138] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229393] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.229677] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.229683] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.229687] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.229768] xen: PV spinlocks enabled [ 0.229770] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.229776] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.229778] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.229815] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.229824] random: crng init done [ 0.229873] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.229899] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231212] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231214] software IO TLB: area num 8. [ 0.290493] Memory: 389292K/524284K available (14349K kernel code, 2686K rwdata, 4576K rodata, 1580K init, 1288K bss, 134740K reserved, 0K cma-reserved) [ 0.290659] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.293130] Dynamic Preempt: voluntary [ 0.293229] rcu: Preemptible hierarchical RCU implementation. [ 0.293230] rcu: RCU event tracing is enabled. [ 0.293230] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.293232] Trampoline variant of Tasks RCU enabled. [ 0.293233] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.293234] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.303825] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.303949] xen:events: Using FIFO-based ABI [ 0.303973] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.303981] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.303989] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.303996] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.304003] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.304010] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.304017] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.304025] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.304032] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.304039] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.304047] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.304054] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.304061] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.304070] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.304077] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.304088] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.309450] Console: colour VGA+ 80x25 [ 0.324225] printk: console [tty0] enabled [ 0.325551] printk: console [hvc0] enabled [ 0.325693] ACPI: Core revision 20220331 [ 0.341185] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.341352] Xen: using vcpuop timer interface [ 0.341359] installing Xen timer for CPU 0 [ 0.341510] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.341669] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199996) [ 0.341998] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.342115] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.342243] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.342392] Spectre V2 : Mitigation: Retpolines [ 0.342676] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.342825] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.342945] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.343066] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.343214] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.343332] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.343484] MDS: Mitigation: Clear CPU buffers [ 0.343597] TAA: Mitigation: Clear CPU buffers [ 0.343674] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.343840] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.343986] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.344134] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.344253] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.344372] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.362074] Freeing SMP alternatives memory: 40K [ 0.362202] pid_max: default: 32768 minimum: 301 [ 0.362692] LSM: Security Framework initializing [ 0.362815] SELinux: Initializing. [ 0.362953] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363106] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363763] cpu 0 spinlock event irq 25 [ 0.363883] VPMU disabled by hypervisor. [ 0.364322] cblist_init_generic: Setting adjustable number of callback queues. [ 0.364469] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.364625] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.364674] signal: max sigframe size: 1776 [ 0.364838] rcu: Hierarchical SRCU implementation. [ 0.364957] rcu: Max phase no-delay instances is 400. [ 0.365450] smp: Bringing up secondary CPUs ... [ 0.365791] installing Xen timer for CPU 1 [ 0.366260] cpu 1 spinlock event irq 35 [ 0.366810] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.366979] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.367168] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.367896] installing Xen timer for CPU 2 [ 0.368354] cpu 2 spinlock event irq 41 [ 0.368752] installing Xen timer for CPU 3 [ 0.369222] cpu 3 spinlock event irq 47 [ 0.369222] installing Xen timer for CPU 4 [ 0.370010] cpu 4 spinlock event irq 53 [ 0.370010] installing Xen timer for CPU 5 [ 0.370844] cpu 5 spinlock event irq 59 [ 0.370880] installing Xen timer for CPU 6 [ 0.371714] cpu 6 spinlock event irq 65 [ 0.371934] installing Xen timer for CPU 7 [ 0.372389] cpu 7 spinlock event irq 71 [ 0.372931] smp: Brought up 1 node, 8 CPUs [ 0.373049] smpboot: Max logical packages: 1 [ 0.373267] devtmpfs: initialized [ 0.373267] x86/mm: Memory block size: 128MB [ 0.373904] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.373941] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.374097] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.374673] PM: RTC time: 02:05:30, date: 2024-09-12 [ 0.374922] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.375068] xen:grant_table: Grant tables using version 1 layout [ 0.375205] Grant table initialized [ 0.375511] audit: initializing netlink subsys (disabled) [ 0.375691] audit: type=2000 audit(1726106730.767:1): state=initialized audit_enabled=0 res=1 [ 0.375742] thermal_sys: Registered thermal governor 'step_wise' [ 0.375742] thermal_sys: Registered thermal governor 'user_space' [ 0.375873] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.376299] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.376676] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.503091] PCI: Using configuration type 1 for base access [ 0.505735] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.506723] ACPI: Added _OSI(Module Device) [ 0.506841] ACPI: Added _OSI(Processor Device) [ 0.506954] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.507068] ACPI: Added _OSI(Processor Aggregator Device) [ 0.536710] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.538695] xen: registering gsi 9 triggering 0 polarity 0 [ 0.541259] ACPI: Dynamic OEM Table Load: [ 0.550554] ACPI: Interpreter enabled [ 0.550689] ACPI: PM: (supports S0 S4 S5) [ 0.550805] ACPI: Using IOAPIC for interrupt routing [ 0.550953] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.551103] PCI: Using E820 reservations for host bridge windows [ 0.551711] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.587792] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.587924] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.588182] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.588443] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.588564] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.588703] PCI host bridge to bus 0000:ff [ 0.588816] pci_bus 0000:ff: root bus resource [bus ff] [ 0.589010] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.589459] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.589889] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.590312] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.590753] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.591175] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.591601] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.591976] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.592432] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.592868] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.593289] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.593724] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.594150] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.594571] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.594989] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.595409] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.595833] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.596260] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.596514] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.596973] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.597445] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.597945] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.598411] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.598877] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.599344] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.599803] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.600252] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.600686] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.601158] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.601626] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.602020] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.602478] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.602907] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.603331] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.603757] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.604189] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.604662] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.605130] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.605596] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.606069] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.606492] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.606917] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.607350] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.607599] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.607991] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.608419] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.608848] pci_bus 0000:ff: on NUMA node 0 [ 0.613177] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.613305] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.613582] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.613896] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.614017] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.614495] PCI host bridge to bus 0000:00 [ 0.614610] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.614673] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.614794] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.614939] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.615091] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.615270] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.615909] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.616429] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.616829] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.617353] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.617741] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.618262] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.618617] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.619068] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.619449] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.619975] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.620342] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.620867] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.621243] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.621824] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.622450] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.623114] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.623334] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.623796] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.624140] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.624357] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.624825] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.625128] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.625346] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.625806] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.626166] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.626362] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.626892] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.627209] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.627761] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.627961] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.628083] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.635842] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.636395] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.636590] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.636681] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.636989] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.637542] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.637735] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.637858] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.638141] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.638702] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.638896] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.639017] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.639340] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.639537] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.640075] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.640398] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.641152] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.641345] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.641503] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.641661] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.641822] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.641979] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.642137] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.642450] pci 0000:00:1f.2: PME# supported from D3hot [ 0.642736] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.642953] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.643197] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.643574] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.644776] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.645500] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.645799] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.646132] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.646364] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.647122] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.647336] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.648047] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.648260] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.648260] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.648260] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.648668] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.648668] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.648668] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.648668] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.649813] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.649998] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.650353] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.650574] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.651673] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.651877] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.651998] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.652570] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.652766] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.653055] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.653239] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.653587] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.653756] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.653877] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.654081] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.654201] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.654754] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.654889] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.655027] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.655317] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.655608] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.655920] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.656040] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.656246] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.656462] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.656627] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.657088] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.657550] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.657677] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.657806] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.658159] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.658284] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.658490] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.658707] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.658872] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.659401] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.659886] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.660011] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.660140] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.660477] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.660477] pci 0000:09:00.0: enabling Extended Tags [ 0.660477] pci 0000:09:00.0: supports D1 D2 [ 0.660477] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.660668] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.660668] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.660668] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.660668] pci_bus 0000:0a: extended config space not accessible [ 0.660668] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.660668] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.661721] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.661888] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.662241] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.662530] pci 0000:0a:00.0: supports D1 D2 [ 0.662645] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.663098] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.663236] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.663365] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.663756] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.663956] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.664174] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.664335] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.664847] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.665081] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.665226] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.665449] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.665594] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.666077] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.666277] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.666486] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.666647] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.668063] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.668292] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.668436] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.668654] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.668672] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.669204] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.669404] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.669613] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.669717] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.670243] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.670478] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.670622] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.670736] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.670881] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.671399] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.671606] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.671762] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.671923] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.672432] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.672661] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.672812] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.673030] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.673174] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.673752] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.673877] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.674006] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.674147] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.674627] pci_bus 0000:00: on NUMA node 0 [ 0.674726] xen: registering gsi 13 triggering 1 polarity 0 [ 0.675706] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.675902] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.676092] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.676281] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.676470] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.676588] ACPI: PCI: Interrupt link LNKE disabled [ 0.676744] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.676863] ACPI: PCI: Interrupt link LNKF disabled [ 0.677078] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.677196] ACPI: PCI: Interrupt link LNKG disabled [ 0.677379] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.677498] ACPI: PCI: Interrupt link LNKH disabled [ 0.677765] xen:balloon: Initialising balloon driver [ 0.677903] iommu: Default domain type: Translated [ 0.685675] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.685860] SCSI subsystem initialized [ 0.685987] libata version 3.00 loaded. [ 0.685987] ACPI: bus type USB registered [ 0.685987] usbcore: registered new interface driver usbfs [ 0.685990] usbcore: registered new interface driver hub [ 0.686131] usbcore: registered new device driver usb [ 0.686259] pps_core: LinuxPPS API ver. 1 registered [ 0.686675] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.686828] PTP clock support registered [ 0.686971] Advanced Linux Sound Architecture Driver Initialized. [ 0.686974] NetLabel: Initializing [ 0.687086] NetLabel: domain hash size = 128 [ 0.687199] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.687691] NetLabel: unlabeled traffic allowed by default [ 0.687832] PCI: Using ACPI for IRQ routing [ 0.722088] PCI: pci_cache_line_size set to 64 bytes [ 0.722863] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.722866] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.722890] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.722890] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.722949] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.723098] vgaarb: loaded [ 0.725671] clocksource: Switched to clocksource tsc-early [ 0.725913] VFS: Disk quotas dquot_6.6.0 [ 0.726037] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.726182] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.726338] pnp: PnP ACPI init [ 0.726824] xen: registering gsi 8 triggering 1 polarity 0 [ 0.726990] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.727114] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.727241] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.727359] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.727478] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.727596] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.727732] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.727857] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.727977] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.728097] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.728221] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.728341] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.728461] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.728878] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.729000] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.729118] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.729236] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.729355] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.729792] xen: registering gsi 4 triggering 1 polarity 0 [ 0.729798] Already setup the GSI :4 [ 0.729915] pnp 00:03: [dma 0 disabled] [ 0.730228] xen: registering gsi 3 triggering 1 polarity 0 [ 0.730240] pnp 00:04: [dma 0 disabled] [ 0.730852] pnp: PnP ACPI: found 5 devices [ 0.762148] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.762304] NET: Registered PF_INET protocol family [ 0.762465] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.762867] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.763021] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.763168] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.763324] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.763493] TCP: Hash tables configured (established 4096 bind 4096) [ 0.763636] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.763810] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.763993] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.764385] RPC: Registered named UNIX socket transport module. [ 0.764512] RPC: Registered udp transport module. [ 0.764652] RPC: Registered tcp transport module. [ 0.764788] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.765339] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.765511] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.765688] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.765865] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.766041] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.766216] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.766390] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.766524] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.766701] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.766841] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.766989] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.767133] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.767278] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.767425] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.767570] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.767731] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.767893] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.768016] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.768161] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.768305] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.768450] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.768572] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.768750] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.768912] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.769059] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.769193] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.769327] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.769498] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.769683] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.769875] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.769997] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.770168] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.770330] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.770449] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.770587] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.770777] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.770900] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.771042] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.771207] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.771327] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.771465] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.771662] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.771839] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.771995] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.772150] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.772303] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.772455] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.772608] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.772784] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.772969] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.773089] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.773228] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.773361] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.773534] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.773695] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.773830] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.773951] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.774071] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.774192] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.774343] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.774461] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.774606] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.774743] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.774871] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.774990] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.775109] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.775225] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.775344] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.775460] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.775579] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.775746] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.775870] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.776417] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.776638] xen: registering gsi 19 triggering 0 polarity 1 [ 0.776665] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.785558] xen: registering gsi 18 triggering 0 polarity 1 [ 0.785579] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.803106] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 17185 usecs [ 0.803390] xen: registering gsi 18 triggering 0 polarity 1 [ 0.803396] Already setup the GSI :18 [ 0.819067] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 15363 usecs [ 0.819302] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.819477] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.819562] Unpacking initramfs... [ 0.819600] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.819963] kvm: no hardware support for 'kvm_intel' [ 0.827770] has_svm: not amd or hygon [ 0.827888] kvm: no hardware support for 'kvm_amd' [ 0.828005] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.828589] clocksource: Switched to clocksource tsc [ 0.831805] Initialise system trusted keyrings [ 0.832128] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.833707] NFS: Registering the id_resolver key type [ 0.833835] Key type id_resolver registered [ 0.833947] Key type id_legacy registered [ 0.834164] 9p: Installing v9fs 9p2000 file system support [ 0.848682] Key type asymmetric registered [ 0.848808] Asymmetric key parser 'x509' registered [ 0.848945] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.849101] io scheduler mq-deadline registered [ 0.849215] io scheduler kyber registered [ 0.850133] xen: registering gsi 16 triggering 0 polarity 1 [ 0.850163] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.850726] xen: registering gsi 16 triggering 0 polarity 1 [ 0.850731] Already setup the GSI :16 [ 0.851382] xen: registering gsi 16 triggering 0 polarity 1 [ 0.851388] Already setup the GSI :16 [ 0.851727] xen: registering gsi 16 triggering 0 polarity 1 [ 0.851732] Already setup the GSI :16 [ 0.852050] xen: registering gsi 16 triggering 0 polarity 1 [ 0.852054] Already setup the GSI :16 [ 0.852708] xen: registering gsi 16 triggering 0 polarity 1 [ 0.852713] Already setup the GSI :16 [ 0.853311] xen: registering gsi 16 triggering 0 polarity 1 [ 0.853316] Already setup the GSI :16 [ 0.853812] xen: registering gsi 17 triggering 0 polarity 1 [ 0.853829] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.854161] xen: registering gsi 19 triggering 0 polarity 1 [ 0.854166] Already setup the GSI :19 [ 0.854615] xen: registering gsi 16 triggering 0 polarity 1 [ 0.854620] Already setup the GSI :16 [ 0.855327] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.855503] ACPI: button: Power Button [PWRB] [ 0.855687] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.855908] ACPI: button: Power Button [PWRF] [ 0.856188] Monitor-Mwait will be used to enter C-1 state [ 0.856222] Monitor-Mwait will be used to enter C-2 state [ 0.856239] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.856623] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.856980] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.857517] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.858074] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.858678] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.859139] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.859499] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.860277] xen:xen_evtchn: Event-channel device installed [ 0.860474] xen_pciback: backend is vpci [ 0.861239] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.861549] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.862249] hpet_acpi_add: no address or irqs in _CRS [ 0.862464] Non-volatile memory driver v1.3 [ 0.862588] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.865281] loop: module loaded [ 0.872186] ahci 0000:00:1f.2: version 3.0 [ 0.872287] xen: registering gsi 16 triggering 0 polarity 1 [ 0.872297] Already setup the GSI :16 [ 0.872642] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.872793] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.888210] scsi host0: ahci [ 0.888565] scsi host1: ahci [ 0.888932] scsi host2: ahci [ 0.889254] scsi host3: ahci [ 0.889563] scsi host4: ahci [ 0.889923] scsi host5: ahci [ 0.890066] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 0.890212] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 0.890357] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 0.890501] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 0.890655] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 0.890800] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 0.891230] tun: Universal TUN/TAP device driver, 1.6 [ 0.891472] e100: Intel(R) PRO/100 Network Driver [ 0.891599] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.891737] sky2: driver version 1.30 [ 0.891920] xen_netfront: Initialising Xen virtual ethernet driver [ 0.892309] xen: registering gsi 18 triggering 0 polarity 1 [ 0.892318] Already setup the GSI :18 [ 0.892524] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.892725] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.892901] ehci-pci 0000:00:1a.0: debug port 2 [ 0.897045] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.903635] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.903870] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.904019] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.904163] usb usb1: Product: EHCI Host Controller [ 0.904277] usb usb1: Manufacturer: Linux 6.1.109+ ehci_hcd [ 0.904393] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.904698] hub 1-0:1.0: USB hub found [ 0.904823] hub 1-0:1.0: 2 ports detected [ 0.905189] xen: registering gsi 18 triggering 0 polarity 1 [ 0.905199] Already setup the GSI :18 [ 0.905390] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.905597] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.905773] ehci-pci 0000:00:1d.0: debug port 2 [ 0.909849] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.916628] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.916851] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.916999] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.917143] usb usb2: Product: EHCI Host Controller [ 0.917257] usb usb2: Manufacturer: Linux 6.1.109+ ehci_hcd [ 0.917373] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.917671] hub 2-0:1.0: USB hub found [ 0.917796] hub 2-0:1.0: 2 ports detected [ 0.918227] xen: registering gsi 19 triggering 0 polarity 1 [ 0.918236] Already setup the GSI :19 [ 0.918441] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.918647] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.919865] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.920346] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.920525] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.920681] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.920886] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.921055] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.921202] usb usb3: Product: xHCI Host Controller [ 0.921316] usb usb3: Manufacturer: Linux 6.1.109+ xhci-hcd [ 0.921432] usb usb3: SerialNumber: 0000:00:14.0 [ 0.921772] hub 3-0:1.0: USB hub found [ 0.921905] hub 3-0:1.0: 8 ports detected [ 0.923070] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.923259] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.923403] usb usb4: Product: xHCI Host Controller [ 0.923519] usb usb4: Manufacturer: Linux 6.1.109+ xhci-hcd [ 0.923648] usb usb4: SerialNumber: 0000:00:14.0 [ 0.923971] hub 4-0:1.0: USB hub found [ 0.924106] hub 4-0:1.0: 6 ports detected [ 0.925361] usbcore: registered new interface driver usblp [ 0.925498] Freeing initrd memory: 20624K [ 0.925507] usbcore: registered new interface driver usb-storage [ 0.925853] i8042: PNP: No PS/2 controller found. [ 0.926203] rtc_cmos 00:00: RTC can wake from S4 [ 0.926846] rtc_cmos 00:00: registered as rtc0 [ 0.927001] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.927202] device-mapper: uevent: version 1.0.3 [ 0.927318] xen: registering gsi 18 triggering 0 polarity 1 [ 0.927333] Already setup the GSI :18 [ 0.927404] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.927483] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.927614] intel_pstate: CPU model not supported [ 0.927645] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.927747] hid: raw HID events driver (C) Jiri Kosina [ 0.928201] usbcore: registered new interface driver usbhid [ 0.928283] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.928318] usbhid: USB HID core driver [ 0.928933] Initializing XFRM netlink socket [ 0.929167] NET: Registered PF_INET6 protocol family [ 0.929750] Segment Routing with IPv6 [ 0.929872] In-situ OAM (IOAM) with IPv6 [ 0.930016] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.930283] NET: Registered PF_PACKET protocol family [ 0.930437] 9pnet: Installing 9P2000 support [ 0.930564] Key type dns_resolver registered [ 0.931350] IPI shorthand broadcast: enabled [ 0.931496] sched_clock: Marking stable (893731286, 37577608)->(1775651592, -844342698) [ 0.932066] registered taskstats version 1 [ 0.932183] Loading compiled-in X.509 certificates [ 0.934805] PM: Magic number: 8:641:55 [ 0.935037] printk: console [netcon0] enabled [ 0.935153] netconsole: network logging started [ 0.935488] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.947382] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.947764] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.948425] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.948623] ALSA device list: [ 0.948744] No soundcards found. [ 1.144666] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.160710] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.160846] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.197784] ata2: SATA link down (SStatus 0 SControl 300) [ 1.197920] ata6: SATA link down (SStatus 0 SControl 300) [ 1.198061] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.198205] ata4: SATA link down (SStatus 0 SControl 300) [ 1.198360] ata1: SATA link down (SStatus 0 SControl 300) [ 1.198864] ata5: SATA link down (SStatus 0 SControl 300) [ 1.199281] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.280983] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.281137] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.281547] hub 1-1:1.0: USB hub found [ 1.281732] hub 1-1:1.0: 4 ports detected [ 1.282651] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.282780] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.288223] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.288375] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.288499] usb 3-3: Product: USB2.0 Hub [ 1.289108] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.289263] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.289489] hub 3-3:1.0: USB hub found [ 1.289796] hub 2-1:1.0: USB hub found [ 1.289918] hub 3-3:1.0: 4 ports detected [ 1.290054] hub 2-1:1.0: 4 ports detected [ 1.310646] ata3.00: configured for UDMA/133 [ 1.311124] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.312069] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.312098] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.312377] sd 2:0:0:0: [sda] Write Protect is off [ 1.312499] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.312563] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.312813] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.331843] sda: sda1 sda2 < sda5 > [ 1.332363] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.333571] Freeing unused kernel image (initmem) memory: 1580K [ 1.333710] Write protecting the kernel read-only data: 22528k [ 1.351538] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.352845] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.405630] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.531910] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.532062] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.532697] hub 3-4:1.0: USB hub found [ 1.532909] hub 3-4:1.0: 4 ports detected [ 1.595641] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.673026] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.673178] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.673350] usb 3-3.2: Product: USB2.0 Hub [ 1.674029] hub 3-3.2:1.0: USB hub found [ 1.674500] hub 3-3.2:1.0: 4 ports detected [ 1.808901] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.809028] Run /init as init process [ 1.809139] with arguments: [ 1.809140] /init [ 1.809141] placeholder [ 1.809142] with environment: [ 1.809143] HOME=/ [ 1.809144] TERM=linux [ 1.826630] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.931004] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.931167] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.937132] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 2.249342] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.249524] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.250156] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.250456] xen: registering gsi 16 triggering 0 polarity 1 [ 2.250471] Already setup the GSI :16 [ 2.253552] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.253694] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.253895] xen: registering gsi 16 triggering 0 polarity 1 [ 2.253902] Already setup the GSI :16 [ 2.273857] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 2.275159] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 2.275509] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.280134] pps pps0: new PPS source ptp0 [ 2.280349] igb 0000:07:00.0: added PHC on eth0 [ 2.280482] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.280614] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.280806] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.280921] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.281153] xen: registering gsi 17 triggering 0 polarity 1 [ 2.281162] Already setup the GSI :17 [ 2.310669] pps pps1: new PPS source ptp1 [ 2.311036] igb 0000:08:00.0: added PHC on eth1 [ 2.311184] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.311305] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.311470] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.311601] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.311835] xen: registering gsi 16 triggering 0 polarity 1 [ 2.311843] Already setup the GSI :16 [ 2.369465] igb 0000:0b:00.0: added PHC on eth2 [ 2.369619] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.369741] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.369945] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.370060] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.370292] xen: registering gsi 17 triggering 0 polarity 1 [ 2.370300] Already setup the GSI :17 [ 2.429053] igb 0000:0b:00.1: added PHC on eth3 [ 2.429190] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.429311] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.429514] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.429643] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.429868] xen: registering gsi 18 triggering 0 polarity 1 [ 2.429877] Already setup the GSI :18 [ 2.487159] igb 0000:0b:00.2: added PHC on eth4 [ 2.487309] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.487431] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.487635] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.487751] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.487993] xen: registering gsi 19 triggering 0 polarity 1 [ 2.488003] Already setup the GSI :19 [ 2.545689] igb 0000:0b:00.3: added PHC on eth5 [ 2.545831] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.545952] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.546155] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.546271] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.549869] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.564098] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.577008] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.589079] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.597960] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.605853] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 2.994236] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.124199] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.124329] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.420656] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.420982] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.421203] xen: registering gsi 17 triggering 0 polarity 1 [ 3.421214] Already setup the GSI :17 [ 4.162025] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.291903] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.292064] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.588594] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.591116] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 4.599082] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 5.006821] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.014674] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.417606] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.402839] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.426975] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.505335] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.329246] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.329415] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.329617] device enx0cc47a9f87be entered promiscuous mode [ 14.969192] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 15.174833] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 15.175076] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 15.175200] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 15.175482] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready