[ 0.000000] microcode: microcode updated early to revision 0x42e, date = 2019-03-14 [ 0.000000] Linux version 6.1.0-25-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.106-3 (2024-08-26) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 root=/dev/mapper/fiano0--vg-root ro console=ttyS0,115200n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007de2bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1799.933 MHz processor [ 0.000921] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000926] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000936] last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.001077] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001725] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved [ 0.001734] last_pfn = 0x7de2c max_arch_pfn = 0x400000000 [ 0.018542] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] [ 0.018568] Using GB pages for direct mapping [ 0.018773] RAMDISK: [mem 0x3310b000-0x3587cfff] [ 0.018781] ACPI: Early table checksum verification disabled [ 0.018785] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.018792] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.018800] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.018808] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.018814] ACPI: FACS 0x000000007E1D8080 000040 [ 0.018818] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.018823] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.018828] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.018833] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.018838] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.018843] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.018849] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.018854] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.018859] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.018864] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.018869] ACPI: DMAR 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.018874] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.018878] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.018881] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.018882] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.018884] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.018885] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.018887] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.018888] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.018889] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.018891] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.018892] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.018893] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.018895] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.018896] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.018898] ACPI: Reserving DMAR table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.018899] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.018968] No NUMA configuration found [ 0.018969] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] [ 0.018985] NODE_DATA(0) allocated [mem 0x27ffd3000-0x27fffdfff] [ 0.019447] Zone ranges: [ 0.019448] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.019451] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.019453] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.019455] Device empty [ 0.019457] Movable zone start for each node [ 0.019461] Early memory node ranges [ 0.019462] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.019464] node 0: [mem 0x0000000000100000-0x000000007de2bfff] [ 0.019466] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.019470] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.019478] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.019536] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.027769] On node 0, zone Normal: 8660 pages in unavailable ranges [ 0.028064] ACPI: PM-Timer IO Port: 0x408 [ 0.028076] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.028079] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.028080] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.028082] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.028094] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.028100] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.028104] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028107] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.028114] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028116] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.028123] TSC deadline timer available [ 0.028125] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.028147] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028150] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.028152] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.028153] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.028154] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.028156] PM: hibernation: Registered nosave memory: [mem 0x7de2c000-0x7debafff] [ 0.028158] PM: hibernation: Registered nosave memory: [mem 0x7debb000-0x7dfc3fff] [ 0.028159] PM: hibernation: Registered nosave memory: [mem 0x7dfc4000-0x7e1e0fff] [ 0.028160] PM: hibernation: Registered nosave memory: [mem 0x7e1e1000-0x7f36afff] [ 0.028162] PM: hibernation: Registered nosave memory: [mem 0x7f36b000-0x7f7fffff] [ 0.028163] PM: hibernation: Registered nosave memory: [mem 0x7f800000-0x7fffffff] [ 0.028164] PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff] [ 0.028165] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.028166] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff] [ 0.028168] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff] [ 0.028169] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.028172] [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.028173] Booting paravirtualized kernel on bare hardware [ 0.028177] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.035464] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.035862] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.035871] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.035876] pcpu-alloc: [0] 0 1 2 3 [ 0.035917] Fallback order for Node 0: 0 [ 0.035921] Built 1 zonelists, mobility grouping on. Total pages: 2055603 [ 0.035923] Policy zone: Normal [ 0.035925] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 root=/dev/mapper/fiano0--vg-root ro console=ttyS0,115200n8 [ 0.035995] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64", will be passed to user space. [ 0.036009] random: crng init done [ 0.037058] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.037629] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.037719] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.037731] software IO TLB: area num 4. [ 0.078663] Memory: 2033056K/8353556K available (14342K kernel code, 2335K rwdata, 9072K rodata, 2796K init, 17396K bss, 305212K reserved, 0K cma-reserved) [ 0.078876] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.078898] Kernel/User page tables isolation: enabled [ 0.078952] ftrace: allocating 40246 entries in 158 pages [ 0.089298] ftrace: allocated 158 pages with 5 groups [ 0.090246] Dynamic Preempt: voluntary [ 0.090290] rcu: Preemptible hierarchical RCU implementation. [ 0.090291] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.090293] Trampoline variant of Tasks RCU enabled. [ 0.090294] Rude variant of Tasks RCU enabled. [ 0.090295] Tracing variant of Tasks RCU enabled. [ 0.090296] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.090297] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.097725] NR_IRQS: 524544, nr_irqs: 864, preallocated irqs: 16 [ 0.097925] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.102480] Console: colour VGA+ 80x25 [ 1.026985] printk: console [ttyS0] enabled [ 1.031192] ACPI: Core revision 20220331 [ 1.035841] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 1.044980] APIC: Switch to symmetric I/O mode setup [ 1.049963] DMAR: Host address width 46 [ 1.053812] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 1.059139] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de [ 1.067061] DMAR: RMRR base: 0x0000007de91000 end: 0x0000007de9dfff [ 1.073335] DMAR: ATSR flags: 0x0 [ 1.076646] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 1.082915] DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0 [ 1.089274] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0 [ 1.095635] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 1.101036] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 1.110165] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 1.115563] x2apic enabled [ 1.118289] Switched APIC routing to cluster x2apic. [ 1.123798] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.148983] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f1ea37c47, max_idle_ns: 440795252868 ns [ 1.159503] Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.86 BogoMIPS (lpj=7199732) [ 1.163533] CPU0: Thermal monitoring enabled (TM1) [ 1.167585] process: using mwait in idle threads [ 1.171503] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 1.175500] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 1.179503] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.183502] Spectre V2 : Mitigation: Retpolines [ 1.187500] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.191500] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.195500] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 1.199502] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.203501] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 1.207501] MDS: Mitigation: Clear CPU buffers [ 1.211500] MMIO Stale Data: Unknown: No mitigations [ 1.215506] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.219500] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.223500] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.227501] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.231500] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.260075] Freeing SMP alternatives memory: 36K [ 1.263501] pid_max: default: 32768 minimum: 301 [ 1.267534] LSM: Security Framework initializing [ 1.271518] landlock: Up and running. [ 1.275500] Yama: disabled by default; enable with sysctl kernel.yama.* [ 1.279533] AppArmor: AppArmor initialized [ 1.283502] TOMOYO Linux initialized [ 1.287507] LSM support for eBPF active [ 1.291547] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.295516] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.304070] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2403 v2 @ 1.80GHz (family: 0x6, model: 0x3e, stepping: 0x4) [ 1.307690] cblist_init_generic: Setting adjustable number of callback queues. [ 1.311502] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.315531] cblist_init_generic: Setting adjustable number of callback queues. [ 1.319501] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.323523] cblist_init_generic: Setting adjustable number of callback queues. [ 1.327501] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.331522] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 1.335502] ... version: 3 [ 1.339500] ... bit width: 48 [ 1.343500] ... generic registers: 8 [ 1.347500] ... value mask: 0000ffffffffffff [ 1.351500] ... max period: 00007fffffffffff [ 1.355500] ... fixed-purpose events: 3 [ 1.359500] ... event mask: 00000007000000ff [ 1.363732] signal: max sigframe size: 1776 [ 1.367525] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 1.371532] rcu: Hierarchical SRCU implementation. [ 1.375501] rcu: Max phase no-delay instances is 1000. [ 1.380172] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.383599] smp: Bringing up secondary CPUs ... [ 1.387651] x86: Booting SMP configuration: [ 1.391506] .... node #0, CPUs: #1 #2 #3 [ 1.406858] smp: Brought up 1 node, 4 CPUs [ 1.411501] smpboot: Max logical packages: 1 [ 1.415501] smpboot: Total of 4 processors activated (14399.46 BogoMIPS) [ 1.439693] node 0 deferred pages initialised in 20ms [ 1.443964] devtmpfs: initialized [ 1.447581] x86/mm: Memory block size: 128MB [ 1.452538] ACPI: PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 1.455552] ACPI: PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 1.459655] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.463514] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.467562] pinctrl core: initialized pinctrl subsystem [ 1.472392] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.475782] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 1.479659] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.483660] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.487510] audit: initializing netlink subsys (disabled) [ 1.491516] audit: type=2000 audit(1726106640.404:1): state=initialized audit_enabled=0 res=1 [ 1.491653] thermal_sys: Registered thermal governor 'fair_share' [ 1.495504] thermal_sys: Registered thermal governor 'bang_bang' [ 1.499501] thermal_sys: Registered thermal governor 'step_wise' [ 1.503501] thermal_sys: Registered thermal governor 'user_space' [ 1.507501] thermal_sys: Registered thermal governor 'power_allocator' [ 1.511518] cpuidle: using governor ladder [ 1.519505] cpuidle: using governor menu [ 1.523477] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 1.523502] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.527604] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 1.531504] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 1.535510] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 1.539922] PCI: Using configuration type 1 for base access [ 1.543599] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 1.548816] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.551563] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 1.555504] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 1.563504] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 1.571501] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 1.575655] ACPI: Added _OSI(Module Device) [ 1.579504] ACPI: Added _OSI(Processor Device) [ 1.583501] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.591502] ACPI: Added _OSI(Processor Aggregator Device) [ 1.711804] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.742699] ACPI: Interpreter enabled [ 1.743524] ACPI: PM: (supports S0 S1 S4 S5) [ 1.747501] ACPI: Using IOAPIC for interrupt routing [ 1.755606] HEST: Table parsing has been initialized. [ 1.759625] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 1.763505] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.775501] PCI: Using E820 reservations for host bridge windows [ 1.780051] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.787610] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PRAD], AE_NOT_FOUND (20220331/psargs-330) [ 1.791504] ACPI Error: Aborting method \_GPE._L24 due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 1.795506] ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_L24] (20220331/evgpe-511) [ 1.799499] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.803499] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.811592] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR] [ 1.819653] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability] [ 1.827502] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.835859] PCI host bridge to bus 0000:00 [ 1.839503] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.847501] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.855501] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.859501] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.867502] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 1.875501] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.883501] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.891501] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.899501] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.903531] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.907585] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.915626] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.923600] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.927670] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.935599] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.939669] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.947539] pci 0000:00:03.0: enabling Extended Tags [ 1.951566] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.955655] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.963518] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.971646] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.975517] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.983637] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 1.991517] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 1.995635] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 2.003517] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 2.007637] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 2.015517] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 2.023635] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 2.027517] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 2.035638] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 2.039520] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 2.047636] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 2.055517] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 2.059634] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 2.067631] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 2.071626] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 2.079513] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 2.087651] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 2.091621] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 2.099644] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 2.103520] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 2.111576] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 2.115593] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 2.123520] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 2.131575] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 2.135605] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 2.143517] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 2.147591] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.155606] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 2.159600] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.167530] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 2.171502] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 2.179604] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 2.183600] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.191525] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 2.195502] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 2.203628] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 2.207517] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 2.215592] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.219604] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.227647] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 2.231717] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 2.239514] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 2.243507] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 2.251507] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 2.255507] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 2.263507] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 2.267508] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 2.271545] pci 0000:00:1f.2: PME# supported from D3hot [ 2.279591] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 2.283518] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 2.291524] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 2.295576] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 2.303521] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 2.311663] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.315552] pci 0000:00:01.1: PCI bridge to [bus 02] [ 2.319551] pci 0000:00:03.0: PCI bridge to [bus 03] [ 2.323584] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 2.331523] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 2.339515] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 2.347510] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 2.351527] pci 0000:04:00.0: enabling Extended Tags [ 2.355607] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 2.363501] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 2.375756] pci 0000:00:11.0: PCI bridge to [bus 04] [ 2.379504] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 2.383509] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 2.391598] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 2.399536] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 2.403538] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 2.411519] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 2.415690] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 2.423724] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 2.427504] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 2.435503] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 2.443602] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 2.447536] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 2.455538] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 2.459519] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 2.467686] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 2.471716] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 2.475504] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 2.483503] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 2.491523] pci_bus 0000:07: extended config space not accessible [ 2.495527] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 2.503517] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 2.507509] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 2.515509] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 2.523547] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.531612] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 2.535505] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 2.543507] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 2.551501] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 2.559501] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 2.567501] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 2.575501] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 2.587501] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 2.595501] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 2.603501] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 2.611501] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 2.624296] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 2.627505] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.639520] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 2.647501] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 2.655568] PCI host bridge to bus 0000:ff [ 2.659502] pci_bus 0000:ff: root bus resource [bus ff] [ 2.663515] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 2.671580] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 2.675570] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 2.683561] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 2.687564] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 2.695563] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 2.699567] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 2.707558] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 2.715559] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 2.719560] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 2.727561] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 2.731558] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 2.739562] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 2.743564] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 2.751577] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 2.755590] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 2.763584] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 2.767584] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 2.775583] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 2.779582] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 2.787585] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 2.791584] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 2.799596] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 2.803585] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 2.811583] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 2.815585] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 2.823585] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 2.827583] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 2.835582] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 2.839560] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 2.847565] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 2.851561] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 2.859564] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 2.867560] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 2.871559] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 2.879720] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 2.883554] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 2.891551] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 2.895551] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 2.903551] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 2.907551] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 2.915563] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 2.919551] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 2.929120] iommu: Default domain type: Translated [ 2.931501] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.939601] pps_core: LinuxPPS API ver. 1 registered [ 2.943501] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.951504] PTP clock support registered [ 2.955439] EDAC MC: Ver: 3.0.0 [ 2.959760] NetLabel: Initializing [ 2.963165] NetLabel: domain hash size = 128 [ 2.967503] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 2.975523] NetLabel: unlabeled traffic allowed by default [ 2.979501] PCI: Using ACPI for IRQ routing [ 2.990461] PCI: pci_cache_line_size set to 64 bytes [ 2.990586] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] [ 2.990589] e820: reserve RAM buffer [mem 0x7de2c000-0x7fffffff] [ 2.991539] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 2.995499] pci 0000:07:01.0: vgaarb: bridge control possible [ 2.995499] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.011509] vgaarb: loaded [ 3.016218] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 3.023501] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 3.031501] clocksource: Switched to clocksource tsc-early [ 3.037205] VFS: Disk quotas dquot_6.6.0 [ 3.041156] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.048218] AppArmor: AppArmor Filesystem Enabled [ 3.052954] pnp: PnP ACPI init [ 3.056170] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 3.062787] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 3.069398] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 3.076010] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 3.082752] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 3.089858] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 3.095783] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 3.103064] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 3.109188] pnp 00:07: [dma 0 disabled] [ 3.109429] pnp 00:08: [dma 0 disabled] [ 3.109717] system 00:09: [io 0x0400-0x0453] has been reserved [ 3.115640] system 00:09: [io 0x0458-0x047f] has been reserved [ 3.121558] system 00:09: [io 0x1180-0x119f] has been reserved [ 3.127477] system 00:09: [io 0x0500-0x057f] has been reserved [ 3.133397] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 3.140009] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 3.146970] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 3.153685] system 00:0a: [io 0x0454-0x0457] has been reserved [ 3.159882] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 3.167112] pnp: PnP ACPI: found 12 devices [ 3.177816] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.186773] NET: Registered PF_INET protocol family [ 3.191842] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 3.202176] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 3.210744] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.218577] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 3.226874] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 3.234671] TCP: Hash tables configured (established 65536 bind 65536) [ 3.241296] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 3.248849] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.255679] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.262974] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.268645] NET: Registered PF_XDP protocol family [ 3.273459] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.278439] pci 0000:00:01.1: PCI bridge to [bus 02] [ 3.283412] pci 0000:00:03.0: PCI bridge to [bus 03] [ 3.288389] pci 0000:00:11.0: PCI bridge to [bus 04] [ 3.293356] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 3.299458] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.307204] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 3.312170] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 3.318265] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 3.325056] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 3.330027] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 3.336121] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 3.342913] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 3.347881] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 3.354667] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.362410] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 3.368593] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 3.374772] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 3.380952] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 3.387132] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.394005] pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.400878] pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.407836] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.414797] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 3.420370] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.427590] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 3.433163] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 3.439429] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 3.445001] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 3.451267] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 3.457533] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.464754] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 3.470932] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 3.477112] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 3.483292] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 3.489471] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.496344] pci_bus 0000:07: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.503218] pci_bus 0000:07: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.510177] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.517228] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 3.545657] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 20857 usecs [ 3.577645] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 23990 usecs [ 3.585152] PCI: CLS 64 bytes, default 64 [ 3.589205] DMAR: No SATC found [ 3.589262] Trying to unpack rootfs image as initramfs... [ 3.592350] DMAR: dmar0: Using Queued invalidation [ 3.592428] pci 0000:00:00.0: Adding to iommu group 0 [ 3.607664] pci 0000:00:01.0: Adding to iommu group 1 [ 3.612742] pci 0000:00:01.1: Adding to iommu group 2 [ 3.617826] pci 0000:00:03.0: Adding to iommu group 3 [ 3.622904] pci 0000:00:04.0: Adding to iommu group 4 [ 3.627983] pci 0000:00:04.1: Adding to iommu group 5 [ 3.633061] pci 0000:00:04.2: Adding to iommu group 6 [ 3.638144] pci 0000:00:04.3: Adding to iommu group 7 [ 3.643225] pci 0000:00:04.4: Adding to iommu group 8 [ 3.648303] pci 0000:00:04.5: Adding to iommu group 9 [ 3.653386] pci 0000:00:04.6: Adding to iommu group 10 [ 3.658548] pci 0000:00:04.7: Adding to iommu group 11 [ 3.663715] pci 0000:00:05.0: Adding to iommu group 12 [ 3.668882] pci 0000:00:05.2: Adding to iommu group 13 [ 3.674050] pci 0000:00:05.4: Adding to iommu group 14 [ 3.679222] pci 0000:00:11.0: Adding to iommu group 15 [ 3.684407] pci 0000:00:16.0: Adding to iommu group 16 [ 3.689581] pci 0000:00:16.1: Adding to iommu group 16 [ 3.694750] pci 0000:00:1a.0: Adding to iommu group 17 [ 3.699925] pci 0000:00:1c.0: Adding to iommu group 18 [ 3.705097] pci 0000:00:1c.1: Adding to iommu group 19 [ 3.710266] pci 0000:00:1d.0: Adding to iommu group 20 [ 3.715437] pci 0000:00:1e.0: Adding to iommu group 21 [ 3.720651] pci 0000:00:1f.0: Adding to iommu group 22 [ 3.725815] pci 0000:00:1f.2: Adding to iommu group 22 [ 3.730982] pci 0000:00:1f.3: Adding to iommu group 22 [ 3.736146] pci 0000:00:1f.6: Adding to iommu group 22 [ 3.741322] pci 0000:04:00.0: Adding to iommu group 23 [ 3.746489] pci 0000:05:00.0: Adding to iommu group 24 [ 3.751653] pci 0000:06:00.0: Adding to iommu group 25 [ 3.756799] pci 0000:07:01.0: Adding to iommu group 21 [ 3.761984] pci 0000:ff:08.0: Adding to iommu group 26 [ 3.767162] pci 0000:ff:09.0: Adding to iommu group 27 [ 3.772375] pci 0000:ff:0a.0: Adding to iommu group 28 [ 3.777549] pci 0000:ff:0a.1: Adding to iommu group 28 [ 3.782716] pci 0000:ff:0a.2: Adding to iommu group 28 [ 3.787886] pci 0000:ff:0a.3: Adding to iommu group 28 [ 3.793081] pci 0000:ff:0b.0: Adding to iommu group 29 [ 3.798252] pci 0000:ff:0b.3: Adding to iommu group 29 [ 3.803442] pci 0000:ff:0c.0: Adding to iommu group 30 [ 3.808616] pci 0000:ff:0c.1: Adding to iommu group 30 [ 3.813816] pci 0000:ff:0d.0: Adding to iommu group 31 [ 3.818989] pci 0000:ff:0d.1: Adding to iommu group 31 [ 3.824184] pci 0000:ff:0e.0: Adding to iommu group 32 [ 3.829357] pci 0000:ff:0e.1: Adding to iommu group 32 [ 3.834531] pci 0000:ff:0f.0: Adding to iommu group 33 [ 3.839701] pci 0000:ff:0f.1: Adding to iommu group 34 [ 3.844864] pci 0000:ff:0f.2: Adding to iommu group 35 [ 3.850032] pci 0000:ff:0f.3: Adding to iommu group 36 [ 3.855200] pci 0000:ff:0f.4: Adding to iommu group 37 [ 3.860370] pci 0000:ff:0f.5: Adding to iommu group 38 [ 3.865541] pci 0000:ff:10.0: Adding to iommu group 39 [ 3.870713] pci 0000:ff:10.1: Adding to iommu group 40 [ 3.875876] pci 0000:ff:10.2: Adding to iommu group 41 [ 3.881043] pci 0000:ff:10.3: Adding to iommu group 42 [ 3.886209] pci 0000:ff:10.4: Adding to iommu group 43 [ 3.891375] pci 0000:ff:10.5: Adding to iommu group 44 [ 3.896540] pci 0000:ff:10.6: Adding to iommu group 45 [ 3.901721] pci 0000:ff:10.7: Adding to iommu group 46 [ 3.906935] pci 0000:ff:13.0: Adding to iommu group 47 [ 3.912114] pci 0000:ff:13.1: Adding to iommu group 47 [ 3.917284] pci 0000:ff:13.4: Adding to iommu group 47 [ 3.922459] pci 0000:ff:13.5: Adding to iommu group 47 [ 3.927665] pci 0000:ff:16.0: Adding to iommu group 48 [ 3.932841] pci 0000:ff:16.1: Adding to iommu group 48 [ 3.938020] pci 0000:ff:16.2: Adding to iommu group 48 [ 3.947041] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 3.953497] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.959938] software IO TLB: mapped [mem 0x0000000079e2c000-0x000000007de2c000] (64MB) [ 3.968408] Initialise system trusted keyrings [ 3.972877] Key type blacklist registered [ 3.976971] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 3.985249] zbud: loaded [ 3.988118] integrity: Platform Keyring initialized [ 3.993015] integrity: Machine keyring initialized [ 3.997814] Key type asymmetric registered [ 4.001911] Asymmetric key parser 'x509' registered [ 4.035096] Freeing initrd memory: 40392K [ 4.046509] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 4.052295] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 4.059728] io scheduler mq-deadline registered [ 4.066706] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.073521] Monitor-Mwait will be used to enter C-1 state [ 4.073535] Monitor-Mwait will be used to enter C-2 state [ 4.073547] ACPI: \_SB_.SCK0.C000: Found 2 idle states [ 4.083669] ERST: Error Record Serialization Table (ERST) support is initialized. [ 4.091156] pstore: Registered erst as persistent store backend [ 4.097213] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.103658] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.111759] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.119979] Linux agpgart interface v0.103 [ 4.124222] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 4.133362] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 4.140241] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 4.150286] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.155263] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.160507] mousedev: PS/2 mouse device common for all mice [ 4.166124] rtc_cmos 00:02: RTC can wake from S4 [ 4.171015] rtc_cmos 00:02: registered as rtc0 [ 4.175496] rtc_cmos 00:02: setting system clock to 2024-09-12T02:04:04 UTC (1726106644) [ 4.183619] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.191445] intel_pstate: Intel P-state driver initializing [ 4.197328] ledtrig-cpu: registered to indicate activity on CPUs [ 4.221791] NET: Registered PF_INET6 protocol family [ 4.235461] Segment Routing with IPv6 [ 4.239150] In-situ OAM (IOAM) with IPv6 [ 4.243108] mip6: Mobile IPv6 [ 4.246084] NET: Registered PF_PACKET protocol family [ 4.251220] mpls_gso: MPLS GSO support [ 4.255502] microcode: sig=0x306e4, pf=0x8, revision=0x42e [ 4.261121] microcode: Microcode Update Driver: v2.2. [ 4.261129] IPI shorthand broadcast: enabled [ 4.270482] sched_clock: Marking stable (3280907325, 989541639)->(4638369845, -367920881) [ 4.278931] registered taskstats version 1 [ 4.283051] Loading compiled-in X.509 certificates [ 4.327603] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.336334] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 4.346983] zswap: loaded using pool lzo/zbud [ 4.351566] Key type .fscrypt registered [ 4.355495] Key type fscrypt-provisioning registered [ 4.360772] pstore: Using crash dump compression: deflate [ 4.373029] Key type encrypted registered [ 4.377058] AppArmor: AppArmor sha1 policy hashing enabled [ 4.382557] ima: No TPM chip found, activating TPM-bypass! [ 4.388047] ima: Allocated hash algorithm: sha256 [ 4.392766] ima: No architecture policies found [ 4.397314] evm: Initialising EVM extended attributes: [ 4.402450] evm: security.selinux [ 4.405768] evm: security.SMACK64 (disabled) [ 4.410041] evm: security.SMACK64EXEC (disabled) [ 4.414661] evm: security.SMACK64TRANSMUTE (disabled) [ 4.419713] evm: security.SMACK64MMAP (disabled) [ 4.424333] evm: security.apparmor [ 4.427739] evm: security.ima [ 4.430713] evm: security.capability [ 4.434293] evm: HMAC attrs: 0x1 [ 4.615301] clk: Disabling unused clocks [ 4.620905] Freeing unused decrypted memory: 2036K [ 4.626336] Freeing unused kernel image (initmem) memory: 2796K [ 4.632332] Write protecting the kernel read-only data: 26624k [ 4.638884] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 4.645817] Freeing unused kernel image (rodata/data gap) memory: 1168K [ 4.735307] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.741748] x86/mm: Checking user space page tables [ 4.821995] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.828439] Run /init as init process [ 4.832101] with arguments: [ 4.832103] /init [ 4.832104] with environment: [ 4.832105] HOME=/ [ 4.832106] TERM=linux [ 4.832107] BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 [ 4.989570] tsc: Refined TSC clocksource calibration: 1799.999 MHz [ 4.995770] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 5.005805] clocksource: Switched to clocksource tsc [ 5.059158] e1000e: Intel(R) PRO/1000 Network Driver [ 5.064138] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 5.074282] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 5.074350] SCSI subsystem initialized [ 5.085775] i2c i2c-0: 1/6 memory slots populated (from DMI) [ 5.091441] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 5.121801] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.131524] ACPI: bus type USB registered [ 5.135592] usbcore: registered new interface driver usbfs [ 5.141095] usbcore: registered new interface driver hub [ 5.146425] usbcore: registered new device driver usb [ 5.160700] libata version 3.00 loaded. [ 5.162972] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.168217] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.175631] ehci-pci 0000:00:1a.0: debug port 2 [ 5.184132] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 5.184226] ahci 0000:00:1f.2: version 3.0 [ 5.192805] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 5.200175] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 5.208560] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 5.209574] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.222407] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.230677] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.237903] usb usb1: Product: EHCI Host Controller [ 5.242781] usb usb1: Manufacturer: Linux 6.1.0-25-amd64 ehci_hcd [ 5.248875] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.253798] hub 1-0:1.0: USB hub found [ 5.253920] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:13:33:8c [ 5.254053] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 5.254075] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 5.257602] hub 1-0:1.0: 2 ports detected [ 5.265732] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 5.272546] isci 0000:04:00.0: OEM parameter table found in OROM [ 5.272616] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.272623] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.272638] ehci-pci 0000:00:1d.0: debug port 2 [ 5.276597] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 5.278193] scsi host0: ahci [ 5.278372] scsi host1: ahci [ 5.278522] scsi host2: ahci [ 5.278620] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.278894] scsi host3: ahci [ 5.279205] scsi host4: ahci [ 5.282553] isci 0000:04:00.0: OEM SAS parameters (version: 1.0) loaded (platform) [ 5.289563] scsi host5: ahci [ 5.289564] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.289636] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.289640] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.289643] usb usb2: Product: EHCI Host Controller [ 5.289644] usb usb2: Manufacturer: Linux 6.1.0-25-amd64 ehci_hcd [ 5.289646] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.289695] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.289845] hub 2-0:1.0: USB hub found [ 5.289856] hub 2-0:1.0: 2 ports detected [ 5.300782] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 5.308125] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 32 [ 5.315357] scsi host6: isci [ 5.318252] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 32 [ 5.343724] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 5.346928] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 32 [ 5.346930] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 32 [ 5.346932] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 32 [ 5.346934] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 32 [ 5.518749] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:13:33:8d [ 5.526672] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 5.533639] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.549603] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.597593] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.664488] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.670713] ata2: SATA link down (SStatus 0 SControl 300) [ 5.676152] ata5: SATA link down (SStatus 0 SControl 300) [ 5.681586] ata4: SATA link down (SStatus 0 SControl 300) [ 5.687002] ata6: SATA link down (SStatus 0 SControl 300) [ 5.692466] ata3: SATA link down (SStatus 0 SControl 300) [ 5.697897] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 5.705067] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.713866] ata1.00: configured for UDMA/133 [ 5.717979] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.726330] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.733933] hub 2-1:1.0: USB hub found [ 5.737851] hub 2-1:1.0: 8 ports detected [ 5.766316] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.774518] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.782076] hub 1-1:1.0: USB hub found [ 5.785813] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 5.793988] hub 1-1:1.0: 6 ports detected [ 5.799552] e1000e 0000:05:00.0 enx0cc47a13338c: renamed from eth0 [ 5.822032] e1000e 0000:06:00.0 enx0cc47a13338d: renamed from eth1 [ 5.828983] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.836672] sd 0:0:0:0: [sda] Write Protect is off [ 5.841474] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.841494] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.850561] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 5.879457] sda: sda1 sda2 < sda5 > [ 5.883287] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.089603] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 6.202772] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.215026] device-mapper: uevent: version 1.0.3 [ 6.219771] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 6.229224] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 6.237610] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.244916] usb 1-1.1: Product: Hermon USB hidmouse Device [ 6.250400] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 6.266537] hid: raw HID events driver (C) Jiri Kosina [ 6.277138] usbcore: registered new interface driver usbhid [ 6.282722] usbhid: USB HID core driver [ 6.288961] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input3 [ 6.303924] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 6.318821] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input4 [ 6.453708] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 6.967408] PM: Image not found (code -22) [ 7.399071] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 7.410386] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 7.590855] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 9.255483] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 9.281639] ACPI: button: Power Button [PWRB] [ 9.286174] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 9.293722] ACPI: button: Power Button [PWRF] [ 9.371077] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 9.394934] IPMI message handler: version 39.2 [ 9.401211] ipmi device interface [ 9.454516] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.544653] dca service started, version 1.12.1 [ 9.561189] ipmi_si: IPMI System Interface driver [ 9.565952] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 9.572307] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 9.579524] ipmi_si: Adding SMBIOS-specified kcs state machine [ 9.585418] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 9.591451] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 9.617533] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 9.625454] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 9.631215] RAPL PMU: hw unit of domain package 2^-16 Joules [ 9.636873] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 9.645348] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 9.651523] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 9.660245] ipmi_si: Adding ACPI-specified kcs state machine [ 9.666032] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 9.681887] iTCO_vendor_support: vendor-support=0 [ 9.687919] cryptd: max_cpu_qlen set to 1000 [ 9.699027] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 9.716302] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 9.763113] AVX version of gcm_enc/dec engaged. [ 9.768803] AES CTR mode by8 optimization enabled [ 9.874462] ACPI: bus type drm_connector registered [ 9.965595] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 10.042859] mgag200 0000:07:01.0: vgaarb: deactivate vga console [ 10.048023] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x0703, dev_id: 0x20) [ 10.064652] Console: switching to colour dummy device 80x25 [ 10.076104] [drm] Initialized mgag200 1.0.0 20110418 for 0000:07:01.0 on minor 0 [ 10.085287] fbcon: mgag200drmfb (fb0) is primary device [ 10.090340] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 10.125753] ipmi_ssif: IPMI SSIF Interface driver [ 10.459858] Console: switching to colour frame buffer device 128x48 [ 10.545787] mgag200 0000:07:01.0: [drm] fb0: mgag200drmfb frame buffer device [ 10.717153] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.717175] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.717180] EDAC sbridge: Seeking for: PCI ID 8086:0e60 [ 10.717185] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.717191] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.717193] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.717199] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.717202] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.717208] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.717210] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.717216] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.717218] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.717224] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.717227] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.717233] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.717235] EDAC sbridge: Seeking for: PCI ID 8086:0e68 [ 10.717240] EDAC sbridge: Seeking for: PCI ID 8086:0e79 [ 10.717246] EDAC sbridge: Seeking for: PCI ID 8086:0e6a [ 10.717251] EDAC sbridge: Seeking for: PCI ID 8086:0e6b [ 10.717256] EDAC sbridge: Seeking for: PCI ID 8086:0e6c [ 10.717261] EDAC sbridge: Seeking for: PCI ID 8086:0e6d [ 10.717267] EDAC sbridge: Seeking for: PCI ID 8086:0eb8 [ 10.717272] EDAC sbridge: Seeking for: PCI ID 8086:0ebc [ 10.717277] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.717284] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.717285] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.717292] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.717293] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.717300] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.717395] EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT) [ 10.728452] EDAC sbridge: Ver: 1.1.2 [ 10.834426] intel_rapl_common: Found RAPL domain package [ 10.839761] intel_rapl_common: Found RAPL domain core [ 10.844822] intel_rapl_common: Found RAPL domain dram [ 11.909355] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 13.056182] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 13.075511] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 13.132216] Adding 1949692k swap on /dev/mapper/fiano0--vg-swap_1. Priority:-2 extents:1 across:1949692k FS [ 13.773562] audit: type=1400 audit(1726106654.408:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1065 comm="apparmor_parser" [ 13.789591] audit: type=1400 audit(1726106654.412:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1066 comm="apparmor_parser" [ 13.804994] audit: type=1400 audit(1726106654.416:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1066 comm="apparmor_parser" [ 13.833563] audit: type=1400 audit(1726106654.468:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1068 comm="apparmor_parser" [ 13.848686] audit: type=1400 audit(1726106654.468:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1068 comm="apparmor_parser" [ 13.863639] audit: type=1400 audit(1726106654.468:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1068 comm="apparmor_parser" [ 14.030968] audit: type=1400 audit(1726106654.668:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1067 comm="apparmor_parser" [ 14.048978] audit: type=1400 audit(1726106654.668:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1067 comm="apparmor_parser" [ 14.066344] audit: type=1400 audit(1726106654.672:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1067 comm="apparmor_parser" [ 14.083966] audit: type=1400 audit(1726106654.676:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=1067 comm="apparmor_parser" [ 17.122662] e1000e 0000:05:00.0 enx0cc47a13338c: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 17.132392] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a13338c: link becomes ready