[ 0.000000] microcode: microcode updated early to revision 0x42e, date = 2019-03-14 [ 0.000000] Linux version 6.1.0-25-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.106-3 (2024-08-26) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007de2bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1799.968 MHz processor [ 0.000921] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000926] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000936] last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.001076] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001725] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved [ 0.001734] last_pfn = 0x7de2c max_arch_pfn = 0x400000000 [ 0.018542] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] [ 0.018568] Using GB pages for direct mapping [ 0.018812] RAMDISK: [mem 0x3310b000-0x3587cfff] [ 0.018821] ACPI: Early table checksum verification disabled [ 0.018825] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.018831] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.018840] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.018849] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.018854] ACPI: FACS 0x000000007E1D8080 000040 [ 0.018859] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.018864] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.018869] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.018874] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.018879] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.018884] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.018890] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.018895] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.018901] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.018906] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.018911] ACPI: DMAR 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.018916] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.018920] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.018922] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.018924] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.018925] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.018927] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.018928] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.018930] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.018931] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.018932] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.018934] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.018935] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.018936] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.018938] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.018939] ACPI: Reserving DMAR table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.018940] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.019010] No NUMA configuration found [ 0.019011] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] [ 0.019027] NODE_DATA(0) allocated [mem 0x27ffd3000-0x27fffdfff] [ 0.019488] Zone ranges: [ 0.019489] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.019492] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.019494] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.019497] Device empty [ 0.019498] Movable zone start for each node [ 0.019502] Early memory node ranges [ 0.019503] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.019505] node 0: [mem 0x0000000000100000-0x000000007de2bfff] [ 0.019507] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.019511] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.019519] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.019577] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.027815] On node 0, zone Normal: 8660 pages in unavailable ranges [ 0.028110] ACPI: PM-Timer IO Port: 0x408 [ 0.028122] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.028125] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.028126] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.028127] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.028139] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.028146] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.028149] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028152] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.028159] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028161] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.028168] TSC deadline timer available [ 0.028169] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.028191] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028194] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.028195] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.028196] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.028198] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.028200] PM: hibernation: Registered nosave memory: [mem 0x7de2c000-0x7debafff] [ 0.028201] PM: hibernation: Registered nosave memory: [mem 0x7debb000-0x7dfc3fff] [ 0.028203] PM: hibernation: Registered nosave memory: [mem 0x7dfc4000-0x7e1e0fff] [ 0.028204] PM: hibernation: Registered nosave memory: [mem 0x7e1e1000-0x7f36afff] [ 0.028205] PM: hibernation: Registered nosave memory: [mem 0x7f36b000-0x7f7fffff] [ 0.028206] PM: hibernation: Registered nosave memory: [mem 0x7f800000-0x7fffffff] [ 0.028208] PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff] [ 0.028209] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.028210] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff] [ 0.028211] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff] [ 0.028212] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.028215] [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.028217] Booting paravirtualized kernel on bare hardware [ 0.028220] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.035507] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.035902] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.035910] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.035915] pcpu-alloc: [0] 0 1 2 3 [ 0.035956] Fallback order for Node 0: 0 [ 0.035960] Built 1 zonelists, mobility grouping on. Total pages: 2055603 [ 0.035962] Policy zone: Normal [ 0.035964] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.036034] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64", will be passed to user space. [ 0.036048] random: crng init done [ 0.037093] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.037663] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.037751] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.037763] software IO TLB: area num 4. [ 0.078663] Memory: 2033056K/8353556K available (14342K kernel code, 2335K rwdata, 9072K rodata, 2796K init, 17396K bss, 305212K reserved, 0K cma-reserved) [ 0.078878] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.078899] Kernel/User page tables isolation: enabled [ 0.078954] ftrace: allocating 40246 entries in 158 pages [ 0.089310] ftrace: allocated 158 pages with 5 groups [ 0.090260] Dynamic Preempt: voluntary [ 0.090305] rcu: Preemptible hierarchical RCU implementation. [ 0.090306] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.090308] Trampoline variant of Tasks RCU enabled. [ 0.090309] Rude variant of Tasks RCU enabled. [ 0.090310] Tracing variant of Tasks RCU enabled. [ 0.090311] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.090312] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.097732] NR_IRQS: 524544, nr_irqs: 864, preallocated irqs: 16 [ 0.097932] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.102469] Console: colour VGA+ 80x25 [ 1.026955] printk: console [ttyS0] enabled [ 1.031163] ACPI: Core revision 20220331 [ 1.035812] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 1.044950] APIC: Switch to symmetric I/O mode setup [ 1.049931] DMAR: Host address width 46 [ 1.053780] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 1.059106] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de [ 1.067020] DMAR: RMRR base: 0x0000007de91000 end: 0x0000007de9dfff [ 1.073288] DMAR: ATSR flags: 0x0 [ 1.076607] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 1.082883] DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0 [ 1.089242] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0 [ 1.095596] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 1.101003] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 1.110135] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 1.115530] x2apic enabled [ 1.118251] Switched APIC routing to cluster x2apic. [ 1.123757] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.148952] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f20b6a59e, max_idle_ns: 440795250954 ns [ 1.159469] Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.93 BogoMIPS (lpj=7199872) [ 1.163500] CPU0: Thermal monitoring enabled (TM1) [ 1.167551] process: using mwait in idle threads [ 1.171469] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 1.175466] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 1.179470] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.183468] Spectre V2 : Mitigation: Retpolines [ 1.187466] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.191466] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.195466] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 1.199468] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.203467] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 1.207467] MDS: Mitigation: Clear CPU buffers [ 1.211466] MMIO Stale Data: Unknown: No mitigations [ 1.215472] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.219466] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.223466] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.227467] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.231466] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.260015] Freeing SMP alternatives memory: 36K [ 1.263468] pid_max: default: 32768 minimum: 301 [ 1.267501] LSM: Security Framework initializing [ 1.271485] landlock: Up and running. [ 1.275466] Yama: disabled by default; enable with sysctl kernel.yama.* [ 1.279500] AppArmor: AppArmor initialized [ 1.283468] TOMOYO Linux initialized [ 1.287473] LSM support for eBPF active [ 1.291513] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.295482] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.304004] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2403 v2 @ 1.80GHz (family: 0x6, model: 0x3e, stepping: 0x4) [ 1.307656] cblist_init_generic: Setting adjustable number of callback queues. [ 1.311468] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.315497] cblist_init_generic: Setting adjustable number of callback queues. [ 1.319467] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.323489] cblist_init_generic: Setting adjustable number of callback queues. [ 1.327467] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.331488] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 1.335468] ... version: 3 [ 1.339467] ... bit width: 48 [ 1.343466] ... generic registers: 8 [ 1.347466] ... value mask: 0000ffffffffffff [ 1.351466] ... max period: 00007fffffffffff [ 1.355467] ... fixed-purpose events: 3 [ 1.359466] ... event mask: 00000007000000ff [ 1.363699] signal: max sigframe size: 1776 [ 1.367491] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 1.371498] rcu: Hierarchical SRCU implementation. [ 1.375467] rcu: Max phase no-delay instances is 1000. [ 1.380137] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.383565] smp: Bringing up secondary CPUs ... [ 1.387616] x86: Booting SMP configuration: [ 1.391472] .... node #0, CPUs: #1 #2 #3 [ 1.406821] smp: Brought up 1 node, 4 CPUs [ 1.411468] smpboot: Max logical packages: 1 [ 1.415467] smpboot: Total of 4 processors activated (14399.74 BogoMIPS) [ 1.439704] node 0 deferred pages initialised in 20ms [ 1.443931] devtmpfs: initialized [ 1.447547] x86/mm: Memory block size: 128MB [ 1.452506] ACPI: PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 1.455519] ACPI: PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 1.459623] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.463480] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.467528] pinctrl core: initialized pinctrl subsystem [ 1.472359] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.475747] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 1.479627] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.483626] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.487477] audit: initializing netlink subsys (disabled) [ 1.491482] audit: type=2000 audit(1726135713.404:1): state=initialized audit_enabled=0 res=1 [ 1.491619] thermal_sys: Registered thermal governor 'fair_share' [ 1.495471] thermal_sys: Registered thermal governor 'bang_bang' [ 1.499468] thermal_sys: Registered thermal governor 'step_wise' [ 1.503467] thermal_sys: Registered thermal governor 'user_space' [ 1.507467] thermal_sys: Registered thermal governor 'power_allocator' [ 1.511484] cpuidle: using governor ladder [ 1.519471] cpuidle: using governor menu [ 1.523443] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 1.523468] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.527570] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 1.531470] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 1.535476] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 1.539890] PCI: Using configuration type 1 for base access [ 1.543565] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 1.548781] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.551527] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 1.555470] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 1.563468] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 1.571467] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 1.575625] ACPI: Added _OSI(Module Device) [ 1.579470] ACPI: Added _OSI(Processor Device) [ 1.583467] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.591468] ACPI: Added _OSI(Processor Aggregator Device) [ 1.711752] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.741121] ACPI: Interpreter enabled [ 1.743489] ACPI: PM: (supports S0 S1 S4 S5) [ 1.747467] ACPI: Using IOAPIC for interrupt routing [ 1.755575] HEST: Table parsing has been initialized. [ 1.759589] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 1.763471] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.775467] PCI: Using E820 reservations for host bridge windows [ 1.780014] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.787575] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PRAD], AE_NOT_FOUND (20220331/psargs-330) [ 1.791470] ACPI Error: Aborting method \_GPE._L24 due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 1.795477] ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_L24] (20220331/evgpe-511) [ 1.799465] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.803465] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.811560] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR] [ 1.819620] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability] [ 1.827468] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.835825] PCI host bridge to bus 0000:00 [ 1.839469] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.847467] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.855467] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.859467] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.867468] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 1.875467] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.883467] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.891467] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.899467] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.903498] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.907551] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.915593] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.923567] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.927635] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.935565] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.939635] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.947505] pci 0000:00:03.0: enabling Extended Tags [ 1.951532] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.959621] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.963484] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.971613] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.975483] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.983604] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 1.991483] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 1.995601] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 2.003483] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 2.007603] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 2.015483] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 2.023601] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 2.027483] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 2.035602] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 2.039486] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 2.047602] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 2.055483] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 2.059601] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 2.067597] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 2.071591] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 2.079479] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 2.087618] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 2.091588] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 2.099609] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 2.103485] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 2.111536] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 2.115556] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 2.123485] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 2.131535] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 2.135570] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 2.143483] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 2.147558] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.155573] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 2.159567] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.167498] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 2.171468] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 2.179583] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 2.183567] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.191494] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 2.195468] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 2.203583] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 2.207484] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 2.215558] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.219570] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.227617] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 2.231683] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 2.239480] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 2.243474] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 2.251474] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 2.255473] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 2.263474] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 2.267474] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 2.271511] pci 0000:00:1f.2: PME# supported from D3hot [ 2.279557] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 2.283485] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 2.291491] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 2.295543] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 2.303488] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 2.311629] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.315518] pci 0000:00:01.1: PCI bridge to [bus 02] [ 2.319517] pci 0000:00:03.0: PCI bridge to [bus 03] [ 2.323550] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 2.331490] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 2.339481] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 2.347476] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 2.351493] pci 0000:04:00.0: enabling Extended Tags [ 2.355573] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 2.363468] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 2.375722] pci 0000:00:11.0: PCI bridge to [bus 04] [ 2.379470] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 2.383475] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 2.391564] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 2.399502] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 2.403504] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 2.411486] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 2.415656] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 2.423688] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 2.427470] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 2.435469] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 2.443568] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 2.447502] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 2.455504] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 2.459486] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 2.467654] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 2.471683] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 2.475470] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 2.483469] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 2.491489] pci_bus 0000:07: extended config space not accessible [ 2.495493] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 2.503483] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 2.507475] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 2.515475] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 2.523513] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.531578] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 2.535471] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 2.543474] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 2.551468] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 2.559467] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 2.567467] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 2.575467] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 2.587467] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 2.595467] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 2.603467] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 2.611467] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 2.624265] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 2.627472] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.639486] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 2.647467] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 2.655534] PCI host bridge to bus 0000:ff [ 2.659469] pci_bus 0000:ff: root bus resource [bus ff] [ 2.663481] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 2.671547] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 2.675536] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 2.683527] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 2.687526] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 2.695530] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 2.699533] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 2.707524] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 2.715525] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 2.719525] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 2.727528] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 2.731524] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 2.739528] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 2.743530] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 2.751543] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 2.755556] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 2.763550] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 2.767550] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 2.775550] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 2.779550] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 2.787552] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 2.791550] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 2.799558] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 2.803551] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 2.811549] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 2.815549] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 2.823554] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 2.827550] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 2.835547] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 2.839527] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 2.847532] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 2.851527] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 2.859530] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 2.867526] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 2.871525] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 2.879687] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 2.883520] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 2.891518] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 2.895518] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 2.903518] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 2.907518] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 2.915529] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 2.919518] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 2.929096] iommu: Default domain type: Translated [ 2.931468] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.939560] pps_core: LinuxPPS API ver. 1 registered [ 2.943468] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.951470] PTP clock support registered [ 2.955406] EDAC MC: Ver: 3.0.0 [ 2.959728] NetLabel: Initializing [ 2.963132] NetLabel: domain hash size = 128 [ 2.967469] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 2.975489] NetLabel: unlabeled traffic allowed by default [ 2.979467] PCI: Using ACPI for IRQ routing [ 2.990466] PCI: pci_cache_line_size set to 64 bytes [ 2.990592] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] [ 2.990595] e820: reserve RAM buffer [mem 0x7de2c000-0x7fffffff] [ 2.991511] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 2.995465] pci 0000:07:01.0: vgaarb: bridge control possible [ 2.995465] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.011475] vgaarb: loaded [ 3.016197] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 3.023467] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 3.031467] clocksource: Switched to clocksource tsc-early [ 3.037164] VFS: Disk quotas dquot_6.6.0 [ 3.041113] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.048178] AppArmor: AppArmor Filesystem Enabled [ 3.052911] pnp: PnP ACPI init [ 3.056121] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 3.062737] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 3.069347] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 3.075960] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 3.082703] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 3.089805] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 3.095732] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 3.103010] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 3.109130] pnp 00:07: [dma 0 disabled] [ 3.109369] pnp 00:08: [dma 0 disabled] [ 3.109656] system 00:09: [io 0x0400-0x0453] has been reserved [ 3.115578] system 00:09: [io 0x0458-0x047f] has been reserved [ 3.121497] system 00:09: [io 0x1180-0x119f] has been reserved [ 3.127414] system 00:09: [io 0x0500-0x057f] has been reserved [ 3.133334] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 3.139947] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 3.146906] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 3.153625] system 00:0a: [io 0x0454-0x0457] has been reserved [ 3.159821] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 3.167053] pnp: PnP ACPI: found 12 devices [ 3.177749] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.186714] NET: Registered PF_INET protocol family [ 3.191778] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 3.202108] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 3.210679] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.218506] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 3.226810] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 3.234605] TCP: Hash tables configured (established 65536 bind 65536) [ 3.241231] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 3.248786] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.255613] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.262900] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.268571] NET: Registered PF_XDP protocol family [ 3.273384] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.278364] pci 0000:00:01.1: PCI bridge to [bus 02] [ 3.283338] pci 0000:00:03.0: PCI bridge to [bus 03] [ 3.288314] pci 0000:00:11.0: PCI bridge to [bus 04] [ 3.293280] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 3.299383] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.307128] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 3.312096] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 3.318192] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 3.324981] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 3.329950] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 3.336045] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 3.342835] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 3.347804] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 3.354589] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.362333] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 3.368515] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 3.374696] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 3.380874] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 3.387052] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.393927] pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.400799] pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.407758] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.414719] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 3.420292] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.427511] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 3.433082] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 3.439348] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 3.444921] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 3.451188] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 3.457454] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.464674] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 3.470853] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 3.477031] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 3.483212] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 3.489390] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.496264] pci_bus 0000:07: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.503136] pci_bus 0000:07: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.510096] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.517148] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 3.545618] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 20898 usecs [ 3.577603] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 23997 usecs [ 3.585111] PCI: CLS 64 bytes, default 64 [ 3.589163] DMAR: No SATC found [ 3.589221] Trying to unpack rootfs image as initramfs... [ 3.592310] DMAR: dmar0: Using Queued invalidation [ 3.592388] pci 0000:00:00.0: Adding to iommu group 0 [ 3.607626] pci 0000:00:01.0: Adding to iommu group 1 [ 3.612702] pci 0000:00:01.1: Adding to iommu group 2 [ 3.617785] pci 0000:00:03.0: Adding to iommu group 3 [ 3.622859] pci 0000:00:04.0: Adding to iommu group 4 [ 3.627941] pci 0000:00:04.1: Adding to iommu group 5 [ 3.633021] pci 0000:00:04.2: Adding to iommu group 6 [ 3.638100] pci 0000:00:04.3: Adding to iommu group 7 [ 3.643184] pci 0000:00:04.4: Adding to iommu group 8 [ 3.648260] pci 0000:00:04.5: Adding to iommu group 9 [ 3.653344] pci 0000:00:04.6: Adding to iommu group 10 [ 3.658507] pci 0000:00:04.7: Adding to iommu group 11 [ 3.663672] pci 0000:00:05.0: Adding to iommu group 12 [ 3.668838] pci 0000:00:05.2: Adding to iommu group 13 [ 3.674006] pci 0000:00:05.4: Adding to iommu group 14 [ 3.679178] pci 0000:00:11.0: Adding to iommu group 15 [ 3.684365] pci 0000:00:16.0: Adding to iommu group 16 [ 3.689538] pci 0000:00:16.1: Adding to iommu group 16 [ 3.694720] pci 0000:00:1a.0: Adding to iommu group 17 [ 3.699897] pci 0000:00:1c.0: Adding to iommu group 18 [ 3.705066] pci 0000:00:1c.1: Adding to iommu group 19 [ 3.710231] pci 0000:00:1d.0: Adding to iommu group 20 [ 3.715398] pci 0000:00:1e.0: Adding to iommu group 21 [ 3.720606] pci 0000:00:1f.0: Adding to iommu group 22 [ 3.725770] pci 0000:00:1f.2: Adding to iommu group 22 [ 3.730935] pci 0000:00:1f.3: Adding to iommu group 22 [ 3.736101] pci 0000:00:1f.6: Adding to iommu group 22 [ 3.741275] pci 0000:04:00.0: Adding to iommu group 23 [ 3.746440] pci 0000:05:00.0: Adding to iommu group 24 [ 3.751607] pci 0000:06:00.0: Adding to iommu group 25 [ 3.756753] pci 0000:07:01.0: Adding to iommu group 21 [ 3.761935] pci 0000:ff:08.0: Adding to iommu group 26 [ 3.767115] pci 0000:ff:09.0: Adding to iommu group 27 [ 3.772327] pci 0000:ff:0a.0: Adding to iommu group 28 [ 3.777494] pci 0000:ff:0a.1: Adding to iommu group 28 [ 3.782662] pci 0000:ff:0a.2: Adding to iommu group 28 [ 3.787839] pci 0000:ff:0a.3: Adding to iommu group 28 [ 3.793034] pci 0000:ff:0b.0: Adding to iommu group 29 [ 3.798203] pci 0000:ff:0b.3: Adding to iommu group 29 [ 3.803398] pci 0000:ff:0c.0: Adding to iommu group 30 [ 3.808568] pci 0000:ff:0c.1: Adding to iommu group 30 [ 3.813766] pci 0000:ff:0d.0: Adding to iommu group 31 [ 3.818940] pci 0000:ff:0d.1: Adding to iommu group 31 [ 3.824125] pci 0000:ff:0e.0: Adding to iommu group 32 [ 3.829302] pci 0000:ff:0e.1: Adding to iommu group 32 [ 3.834472] pci 0000:ff:0f.0: Adding to iommu group 33 [ 3.839642] pci 0000:ff:0f.1: Adding to iommu group 34 [ 3.844806] pci 0000:ff:0f.2: Adding to iommu group 35 [ 3.849975] pci 0000:ff:0f.3: Adding to iommu group 36 [ 3.855138] pci 0000:ff:0f.4: Adding to iommu group 37 [ 3.860305] pci 0000:ff:0f.5: Adding to iommu group 38 [ 3.865473] pci 0000:ff:10.0: Adding to iommu group 39 [ 3.870644] pci 0000:ff:10.1: Adding to iommu group 40 [ 3.875811] pci 0000:ff:10.2: Adding to iommu group 41 [ 3.880975] pci 0000:ff:10.3: Adding to iommu group 42 [ 3.886139] pci 0000:ff:10.4: Adding to iommu group 43 [ 3.891308] pci 0000:ff:10.5: Adding to iommu group 44 [ 3.896480] pci 0000:ff:10.6: Adding to iommu group 45 [ 3.901658] pci 0000:ff:10.7: Adding to iommu group 46 [ 3.906874] pci 0000:ff:13.0: Adding to iommu group 47 [ 3.912056] pci 0000:ff:13.1: Adding to iommu group 47 [ 3.917225] pci 0000:ff:13.4: Adding to iommu group 47 [ 3.922401] pci 0000:ff:13.5: Adding to iommu group 47 [ 3.927602] pci 0000:ff:16.0: Adding to iommu group 48 [ 3.932776] pci 0000:ff:16.1: Adding to iommu group 48 [ 3.937950] pci 0000:ff:16.2: Adding to iommu group 48 [ 3.946990] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 3.953445] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.959884] software IO TLB: mapped [mem 0x0000000079e2c000-0x000000007de2c000] (64MB) [ 3.968359] Initialise system trusted keyrings [ 3.972824] Key type blacklist registered [ 3.976919] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 3.985210] zbud: loaded [ 3.988066] integrity: Platform Keyring initialized [ 3.992961] integrity: Machine keyring initialized [ 3.997752] Key type asymmetric registered [ 4.001849] Asymmetric key parser 'x509' registered [ 4.034901] Freeing initrd memory: 40392K [ 4.046288] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 4.052073] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 4.059511] io scheduler mq-deadline registered [ 4.066496] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.073304] Monitor-Mwait will be used to enter C-1 state [ 4.073318] Monitor-Mwait will be used to enter C-2 state [ 4.073324] ACPI: \_SB_.SCK0.C000: Found 2 idle states [ 4.083444] ERST: Error Record Serialization Table (ERST) support is initialized. [ 4.090935] pstore: Registered erst as persistent store backend [ 4.097026] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.103461] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.111564] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.119780] Linux agpgart interface v0.103 [ 4.124018] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 4.133158] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 4.140037] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 4.149906] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.154875] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.160122] mousedev: PS/2 mouse device common for all mice [ 4.165736] rtc_cmos 00:02: RTC can wake from S4 [ 4.170634] rtc_cmos 00:02: registered as rtc0 [ 4.175117] rtc_cmos 00:02: setting system clock to 2024-09-12T10:08:38 UTC (1726135718) [ 4.183241] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.191043] intel_pstate: Intel P-state driver initializing [ 4.196892] ledtrig-cpu: registered to indicate activity on CPUs [ 4.221381] NET: Registered PF_INET6 protocol family [ 4.235299] Segment Routing with IPv6 [ 4.238994] In-situ OAM (IOAM) with IPv6 [ 4.242958] mip6: Mobile IPv6 [ 4.245937] NET: Registered PF_PACKET protocol family [ 4.251081] mpls_gso: MPLS GSO support [ 4.255330] microcode: sig=0x306e4, pf=0x8, revision=0x42e [ 4.260874] microcode: Microcode Update Driver: v2.2. [ 4.260882] IPI shorthand broadcast: enabled [ 4.270249] sched_clock: Marking stable (3280712983, 989501278)->(4638203426, -367989165) [ 4.278689] registered taskstats version 1 [ 4.282806] Loading compiled-in X.509 certificates [ 4.326947] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.335673] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 4.346308] zswap: loaded using pool lzo/zbud [ 4.350923] Key type .fscrypt registered [ 4.354849] Key type fscrypt-provisioning registered [ 4.360128] pstore: Using crash dump compression: deflate [ 4.372962] Key type encrypted registered [ 4.376994] AppArmor: AppArmor sha1 policy hashing enabled [ 4.382492] ima: No TPM chip found, activating TPM-bypass! [ 4.387983] ima: Allocated hash algorithm: sha256 [ 4.392699] ima: No architecture policies found [ 4.397239] evm: Initialising EVM extended attributes: [ 4.402374] evm: security.selinux [ 4.405695] evm: security.SMACK64 (disabled) [ 4.409967] evm: security.SMACK64EXEC (disabled) [ 4.414585] evm: security.SMACK64TRANSMUTE (disabled) [ 4.419639] evm: security.SMACK64MMAP (disabled) [ 4.424257] evm: security.apparmor [ 4.427665] evm: security.ima [ 4.430637] evm: security.capability [ 4.434216] evm: HMAC attrs: 0x1 [ 4.618724] clk: Disabling unused clocks [ 4.624321] Freeing unused decrypted memory: 2036K [ 4.629761] Freeing unused kernel image (initmem) memory: 2796K [ 4.635760] Write protecting the kernel read-only data: 26624k [ 4.642311] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 4.649252] Freeing unused kernel image (rodata/data gap) memory: 1168K [ 4.738635] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.745078] x86/mm: Checking user space page tables [ 4.825369] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.831810] Run /init as init process [ 4.835472] with arguments: [ 4.835474] /init [ 4.835475] with environment: [ 4.835476] HOME=/ [ 4.835477] TERM=linux [ 4.835478] BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 [ 4.989532] tsc: Refined TSC clocksource calibration: 1800.000 MHz [ 4.995729] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f2297dd97, max_idle_ns: 440795236593 ns [ 5.005741] clocksource: Switched to clocksource tsc [ 5.042023] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 5.049256] i2c i2c-0: 1/6 memory slots populated (from DMI) [ 5.054940] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 5.086413] e1000e: Intel(R) PRO/1000 Network Driver [ 5.091169] SCSI subsystem initialized [ 5.091385] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 5.101314] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.111375] ACPI: bus type USB registered [ 5.115437] usbcore: registered new interface driver usbfs [ 5.120947] usbcore: registered new interface driver hub [ 5.126624] usbcore: registered new device driver usb [ 5.140595] libata version 3.00 loaded. [ 5.141582] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.146827] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.154241] ehci-pci 0000:00:1a.0: debug port 2 [ 5.162536] ahci 0000:00:1f.2: version 3.0 [ 5.162757] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 5.162848] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 5.164537] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 5.181530] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.184180] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 5.189993] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.206182] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.213403] usb usb1: Product: EHCI Host Controller [ 5.218283] usb usb1: Manufacturer: Linux 6.1.0-25-amd64 ehci_hcd [ 5.224373] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.233059] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a6 [ 5.240981] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 5.241730] hub 1-0:1.0: USB hub found [ 5.247931] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.251623] hub 1-0:1.0: 2 ports detected [ 5.258562] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.258938] scsi host0: ahci [ 5.262667] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.271700] scsi host1: ahci [ 5.274514] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.280508] scsi host2: ahci [ 5.282642] ehci-pci 0000:00:1d.0: debug port 2 [ 5.290517] scsi host3: ahci [ 5.296897] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 5.297943] scsi host4: ahci [ 5.309375] scsi host5: ahci [ 5.309377] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 5.312429] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 32 [ 5.313530] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.313599] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.313603] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.313605] usb usb2: Product: EHCI Host Controller [ 5.313607] usb usb2: Manufacturer: Linux 6.1.0-25-amd64 ehci_hcd [ 5.313609] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.313774] hub 2-0:1.0: USB hub found [ 5.313783] hub 2-0:1.0: 2 ports detected [ 5.318723] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 5.326100] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 32 [ 5.338163] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 5.340386] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 32 [ 5.351430] isci 0000:04:00.0: OEM parameter table found in OROM [ 5.353023] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 32 [ 5.359128] isci 0000:04:00.0: OEM SAS parameters (version: 1.0) loaded (platform) [ 5.363734] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 32 [ 5.371676] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 5.377761] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 32 [ 5.398881] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a7 [ 5.402930] scsi host6: isci [ 5.406133] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 5.462142] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.593552] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.600124] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.691722] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.697948] ata6: SATA link down (SStatus 0 SControl 300) [ 5.703380] ata3: SATA link down (SStatus 0 SControl 300) [ 5.708805] ata4: SATA link down (SStatus 0 SControl 300) [ 5.714235] ata2: SATA link down (SStatus 0 SControl 300) [ 5.719664] ata5: SATA link down (SStatus 0 SControl 300) [ 5.725170] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 5.732339] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.741247] ata1.00: configured for UDMA/133 [ 5.745579] scsi: waiting for bus probes to complete ... [ 5.766344] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.774531] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.781666] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.789845] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.797283] hub 2-1:1.0: USB hub found [ 5.801103] hub 1-1:1.0: USB hub found [ 5.804866] hub 2-1:1.0: 8 ports detected [ 5.808881] hub 1-1:1.0: 6 ports detected [ 5.849787] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 5.861113] e1000e 0000:06:00.0 enx002590eb25a7: renamed from eth1 [ 5.885609] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.885879] e1000e 0000:05:00.0 enx002590eb25a6: renamed from eth0 [ 5.893293] sd 0:0:0:0: [sda] Write Protect is off [ 5.904262] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.904292] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.913373] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 5.945334] sda: sda1 sda2 < sda5 > [ 5.949217] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.101564] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 6.223644] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 6.232022] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.239333] usb 1-1.1: Product: Hermon USB hidmouse Device [ 6.244826] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 6.253997] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.266223] device-mapper: uevent: version 1.0.3 [ 6.266986] hid: raw HID events driver (C) Jiri Kosina [ 6.270945] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 6.289864] usbcore: registered new interface driver usbhid [ 6.295445] usbhid: USB HID core driver [ 6.301688] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input3 [ 6.316553] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 6.331429] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input4 [ 6.481664] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 6.814087] PM: Image not found (code -22) [ 7.171795] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 7.183333] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 7.378785] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 9.107957] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 9.133583] ACPI: button: Power Button [PWRB] [ 9.138071] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 9.145754] ACPI: button: Power Button [PWRF] [ 9.186803] dca service started, version 1.12.1 [ 9.239827] iTCO_vendor_support: vendor-support=0 [ 9.245553] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 9.377235] IPMI message handler: version 39.2 [ 9.389338] ipmi device interface [ 9.396375] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 9.412102] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 9.455301] ipmi_si: IPMI System Interface driver [ 9.460125] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 9.466497] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 9.473800] ipmi_si: Adding SMBIOS-specified kcs state machine [ 9.479717] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 9.485784] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 9.496662] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.583959] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 9.592684] ipmi_si: Adding ACPI-specified kcs state machine [ 9.598591] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 9.610227] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 9.618153] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 9.623897] RAPL PMU: hw unit of domain package 2^-16 Joules [ 9.629555] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 9.636499] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 9.727375] cryptd: max_cpu_qlen set to 1000 [ 9.795889] ACPI: bus type drm_connector registered [ 9.888028] AVX version of gcm_enc/dec engaged. [ 9.892630] AES CTR mode by8 optimization enabled [ 9.905532] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 9.988186] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x0703, dev_id: 0x20) [ 10.038728] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 10.062223] mgag200 0000:07:01.0: vgaarb: deactivate vga console [ 10.073219] ipmi_ssif: IPMI SSIF Interface driver [ 10.073252] Console: switching to colour dummy device 80x25 [ 10.089453] [drm] Initialized mgag200 1.0.0 20110418 for 0000:07:01.0 on minor 0 [ 10.098917] fbcon: mgag200drmfb (fb0) is primary device [ 10.468648] Console: switching to colour frame buffer device 128x48 [ 10.544839] mgag200 0000:07:01.0: [drm] fb0: mgag200drmfb frame buffer device [ 10.864702] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.864729] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.864735] EDAC sbridge: Seeking for: PCI ID 8086:0e60 [ 10.864743] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.864752] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.864756] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.864764] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.864768] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.864776] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.864780] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.864788] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.864792] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.864800] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.864804] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.864812] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.864816] EDAC sbridge: Seeking for: PCI ID 8086:0e68 [ 10.864823] EDAC sbridge: Seeking for: PCI ID 8086:0e79 [ 10.864831] EDAC sbridge: Seeking for: PCI ID 8086:0e6a [ 10.864838] EDAC sbridge: Seeking for: PCI ID 8086:0e6b [ 10.864846] EDAC sbridge: Seeking for: PCI ID 8086:0e6c [ 10.864854] EDAC sbridge: Seeking for: PCI ID 8086:0e6d [ 10.864861] EDAC sbridge: Seeking for: PCI ID 8086:0eb8 [ 10.864869] EDAC sbridge: Seeking for: PCI ID 8086:0ebc [ 10.864876] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.864886] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.864888] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.864898] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.864900] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.864910] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.865048] EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT) [ 10.876124] EDAC sbridge: Ver: 1.1.2 [ 11.092616] intel_rapl_common: Found RAPL domain package [ 11.098054] intel_rapl_common: Found RAPL domain core [ 11.103114] intel_rapl_common: Found RAPL domain dram [ 12.204489] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 13.233700] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 13.262028] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 13.310756] Adding 1949692k swap on /dev/mapper/fiano1--vg-swap_1. Priority:-2 extents:1 across:1949692k FS [ 13.894078] audit: type=1400 audit(1726135727.864:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1066 comm="apparmor_parser" [ 13.909307] audit: type=1400 audit(1726135727.864:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1067 comm="apparmor_parser" [ 13.924686] audit: type=1400 audit(1726135727.864:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1067 comm="apparmor_parser" [ 13.954147] audit: type=1400 audit(1726135727.924:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1069 comm="apparmor_parser" [ 13.969288] audit: type=1400 audit(1726135727.924:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1069 comm="apparmor_parser" [ 13.984221] audit: type=1400 audit(1726135727.924:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1069 comm="apparmor_parser" [ 14.123084] audit: type=1400 audit(1726135728.092:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=1079 comm="apparmor_parser" [ 14.159397] audit: type=1400 audit(1726135728.128:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1068 comm="apparmor_parser" [ 14.177377] audit: type=1400 audit(1726135728.128:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1068 comm="apparmor_parser" [ 14.194829] audit: type=1400 audit(1726135728.132:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1068 comm="apparmor_parser" [ 17.246611] e1000e 0000:05:00.0 enx002590eb25a6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 17.256327] IPv6: ADDRCONF(NETDEV_CHANGE): enx002590eb25a6: link becomes ready