[ 0.000000] Linux version 6.1.109+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Thu Sep 12 09:47:08 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000459] tsc: Detected 2199.998 MHz processor [ 0.000899] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000902] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000909] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000911] Disabled [ 0.000912] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000916] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000955] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027685] RAMDISK: [mem 0x04000000-0x05423fff] [ 0.027692] ACPI: Early table checksum verification disabled [ 0.028292] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028303] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028340] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028389] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028405] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028420] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028436] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028452] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028468] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028484] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028500] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028516] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028532] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028549] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028565] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028581] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028597] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028613] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028629] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028645] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028661] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028676] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028685] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028687] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028688] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028689] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028690] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028691] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028692] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028693] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028693] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028694] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028695] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028696] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028697] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028705] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028707] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028708] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028709] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028710] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028711] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028712] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028757] Setting APIC routing to Xen PV. [ 0.032703] Zone ranges: [ 0.032704] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032707] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032709] Normal empty [ 0.032710] Movable zone start for each node [ 0.032711] Early memory node ranges [ 0.032711] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032713] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032715] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032719] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032755] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034311] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034316] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221854] Remapped 102 page(s) [ 0.223230] ACPI: PM-Timer IO Port: 0x408 [ 0.223282] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223285] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223287] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223288] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223289] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223291] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223292] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223294] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223322] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223335] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223338] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223364] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223369] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223438] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223453] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223455] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223456] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223458] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223463] Booting kernel on Xen [ 0.223464] Xen version: 4.20-unstable (preserve-AD) [ 0.223467] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229724] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.230006] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.230013] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.230017] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230097] xen: PV spinlocks enabled [ 0.230100] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230106] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230108] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230145] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230154] random: crng init done [ 0.230203] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230229] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231544] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231547] software IO TLB: area num 8. [ 0.294081] Memory: 389292K/524284K available (14349K kernel code, 2686K rwdata, 4576K rodata, 1580K init, 1288K bss, 134740K reserved, 0K cma-reserved) [ 0.294248] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.296725] Dynamic Preempt: voluntary [ 0.296824] rcu: Preemptible hierarchical RCU implementation. [ 0.296825] rcu: RCU event tracing is enabled. [ 0.296826] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.296827] Trampoline variant of Tasks RCU enabled. [ 0.296828] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.296830] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.307364] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.307485] xen:events: Using FIFO-based ABI [ 0.307511] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.307520] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.307527] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.307534] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.307542] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.307549] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.307556] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.307563] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.307570] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.307578] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.307585] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.307592] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.307600] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.307607] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.307614] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.307625] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.312994] Console: colour VGA+ 80x25 [ 0.327792] printk: console [tty0] enabled [ 0.329067] printk: console [hvc0] enabled [ 0.329188] ACPI: Core revision 20220331 [ 0.343169] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.343335] Xen: using vcpuop timer interface [ 0.343340] installing Xen timer for CPU 0 [ 0.343485] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.343644] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199998) [ 0.343970] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.344087] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.344215] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.344364] Spectre V2 : Mitigation: Retpolines [ 0.344650] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.344796] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.344923] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.345045] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.345193] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.345311] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.345464] MDS: Mitigation: Clear CPU buffers [ 0.345577] TAA: Mitigation: Clear CPU buffers [ 0.345648] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.345813] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.345959] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.346078] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.346204] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.346328] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.363996] Freeing SMP alternatives memory: 40K [ 0.364129] pid_max: default: 32768 minimum: 301 [ 0.364665] LSM: Security Framework initializing [ 0.364788] SELinux: Initializing. [ 0.364926] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.365073] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.365735] cpu 0 spinlock event irq 25 [ 0.365856] VPMU disabled by hypervisor. [ 0.366293] cblist_init_generic: Setting adjustable number of callback queues. [ 0.366440] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.366597] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.366649] signal: max sigframe size: 1776 [ 0.366813] rcu: Hierarchical SRCU implementation. [ 0.366933] rcu: Max phase no-delay instances is 400. [ 0.367423] smp: Bringing up secondary CPUs ... [ 0.367762] installing Xen timer for CPU 1 [ 0.368684] cpu 1 spinlock event irq 35 [ 0.369395] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.369650] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.369839] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.370258] installing Xen timer for CPU 2 [ 0.370709] cpu 2 spinlock event irq 41 [ 0.370854] installing Xen timer for CPU 3 [ 0.371339] cpu 3 spinlock event irq 47 [ 0.371859] installing Xen timer for CPU 4 [ 0.372368] cpu 4 spinlock event irq 53 [ 0.372856] installing Xen timer for CPU 5 [ 0.373334] cpu 5 spinlock event irq 59 [ 0.373731] installing Xen timer for CPU 6 [ 0.374177] cpu 6 spinlock event irq 65 [ 0.374663] installing Xen timer for CPU 7 [ 0.375177] cpu 7 spinlock event irq 71 [ 0.375177] smp: Brought up 1 node, 8 CPUs [ 0.375648] smpboot: Max logical packages: 1 [ 0.375866] devtmpfs: initialized [ 0.375866] x86/mm: Memory block size: 128MB [ 0.376159] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.376882] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.377038] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.377289] PM: RTC time: 10:08:43, date: 2024-09-12 [ 0.377549] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.377688] xen:grant_table: Grant tables using version 1 layout [ 0.377827] Grant table initialized [ 0.378130] audit: initializing netlink subsys (disabled) [ 0.378265] audit: type=2000 audit(1726135723.345:1): state=initialized audit_enabled=0 res=1 [ 0.378674] thermal_sys: Registered thermal governor 'step_wise' [ 0.378682] thermal_sys: Registered thermal governor 'user_space' [ 0.378834] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.379267] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.379423] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.507446] PCI: Using configuration type 1 for base access [ 0.510164] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.510727] ACPI: Added _OSI(Module Device) [ 0.510846] ACPI: Added _OSI(Processor Device) [ 0.510978] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.511110] ACPI: Added _OSI(Processor Aggregator Device) [ 0.557112] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.560424] xen: registering gsi 9 triggering 0 polarity 0 [ 0.564539] ACPI: Dynamic OEM Table Load: [ 0.572218] ACPI: Interpreter enabled [ 0.572382] ACPI: PM: (supports S0 S4 S5) [ 0.572494] ACPI: Using IOAPIC for interrupt routing [ 0.572642] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.572807] PCI: Using E820 reservations for host bridge windows [ 0.573386] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.606758] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.606888] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.607126] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.607421] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.607541] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.608683] PCI host bridge to bus 0000:ff [ 0.608797] pci_bus 0000:ff: root bus resource [bus ff] [ 0.608992] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.609441] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.609888] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.610313] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.610767] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.611199] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.611622] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.611955] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.612404] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.612855] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.613279] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.613716] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.614144] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.614577] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.614967] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.615392] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.615832] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.616268] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.616527] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.616992] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.617467] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.617953] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.618425] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.618908] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.619382] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.619856] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.620281] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.620733] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.621202] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.621684] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.622175] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.622647] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.623075] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.623530] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.623956] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.624390] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.624880] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.625348] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.625859] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.626377] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.626817] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.627256] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.627702] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.627952] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.628391] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.628831] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.629259] pci_bus 0000:ff: on NUMA node 0 [ 0.633633] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.633763] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.634041] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.634391] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.634512] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.634987] PCI host bridge to bus 0000:00 [ 0.635102] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.635224] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.635345] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.635502] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.635647] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.635828] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.636467] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.637003] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.637376] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.637906] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.638302] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.638834] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.639193] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.639723] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.640105] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.640642] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.641028] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.641549] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.641903] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.642479] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.643121] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.643799] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.644018] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.644480] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.644838] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.645061] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.645532] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.645837] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.646056] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.646520] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.646889] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.647087] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.647633] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.647851] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.648399] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.648610] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.648655] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.655832] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.656389] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.656589] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.656656] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.656954] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.657509] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.657707] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.657840] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.658156] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.658716] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.658919] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.659041] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.659369] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.659567] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.660075] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.660401] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.661180] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.661375] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.661533] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.661694] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.661859] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.662023] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.662180] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.662493] pci 0000:00:1f.2: PME# supported from D3hot [ 0.662792] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.663010] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.663255] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.663640] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.663860] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.664583] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.665836] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.666169] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.666382] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.667149] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.667363] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.668083] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.668297] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.669019] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.669232] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.669232] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.669232] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.669422] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.669635] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.669930] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.670115] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.670466] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.670699] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.670821] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.671025] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.671147] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.672724] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.672939] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.673224] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.673409] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.673757] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.673969] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.674090] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.674294] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.674415] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.674982] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.675118] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.675270] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.675561] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.675827] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.676190] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.676310] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.676517] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.676744] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.676910] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.677441] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.677924] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.678050] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.678179] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.678533] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.678647] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.678855] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.679072] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.679238] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.679805] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.680269] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.680395] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.680524] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.680868] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.681262] pci 0000:09:00.0: enabling Extended Tags [ 0.681611] pci 0000:09:00.0: supports D1 D2 [ 0.681647] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.682022] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.682149] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.682278] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.682591] pci_bus 0000:0a: extended config space not accessible [ 0.682701] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.682907] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.683074] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.683247] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.683611] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.683790] pci 0000:0a:00.0: supports D1 D2 [ 0.683903] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.684353] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.684492] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.684628] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.684922] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.685123] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.685341] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.685503] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.686026] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.686272] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.686418] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.686636] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.686780] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.687353] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.687555] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.687737] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.687899] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.688419] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.688661] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.688807] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.689025] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.689170] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.689701] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.689907] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.690117] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.690288] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.690798] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.691028] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.691173] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.691396] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.691541] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.692017] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.692229] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.692439] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.692604] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.693039] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.693277] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.693422] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.693640] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.693780] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.694382] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.694509] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.694647] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.694788] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.695272] pci_bus 0000:00: on NUMA node 0 [ 0.695367] xen: registering gsi 13 triggering 1 polarity 0 [ 0.696357] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.696552] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.696722] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.696915] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.697120] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.697240] ACPI: PCI: Interrupt link LNKE disabled [ 0.697426] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.697545] ACPI: PCI: Interrupt link LNKF disabled [ 0.697719] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.697838] ACPI: PCI: Interrupt link LNKG disabled [ 0.698030] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.698151] ACPI: PCI: Interrupt link LNKH disabled [ 0.698412] xen:balloon: Initialising balloon driver [ 0.698738] iommu: Default domain type: Translated [ 0.706648] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.706834] SCSI subsystem initialized [ 0.706961] libata version 3.00 loaded. [ 0.706961] ACPI: bus type USB registered [ 0.706961] usbcore: registered new interface driver usbfs [ 0.706961] usbcore: registered new interface driver hub [ 0.707071] usbcore: registered new device driver usb [ 0.707659] pps_core: LinuxPPS API ver. 1 registered [ 0.707779] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.707931] PTP clock support registered [ 0.708067] Advanced Linux Sound Architecture Driver Initialized. [ 0.708067] NetLabel: Initializing [ 0.708067] NetLabel: domain hash size = 128 [ 0.708647] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.708783] NetLabel: unlabeled traffic allowed by default [ 0.708923] PCI: Using ACPI for IRQ routing [ 0.745679] PCI: pci_cache_line_size set to 64 bytes [ 0.746467] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.746470] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.746686] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.746810] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.746928] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.746928] vgaarb: loaded [ 0.748664] clocksource: Switched to clocksource tsc-early [ 0.748876] VFS: Disk quotas dquot_6.6.0 [ 0.749007] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.749153] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.749311] pnp: PnP ACPI init [ 0.749790] xen: registering gsi 8 triggering 1 polarity 0 [ 0.749987] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.750118] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.750237] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.750356] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.750475] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.750593] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.750738] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.750861] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.750982] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.751102] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.751227] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.751348] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.751501] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.751915] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.752038] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.752156] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.752275] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.752394] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.752825] xen: registering gsi 4 triggering 1 polarity 0 [ 0.752829] Already setup the GSI :4 [ 0.752941] pnp 00:03: [dma 0 disabled] [ 0.753250] xen: registering gsi 3 triggering 1 polarity 0 [ 0.753261] pnp 00:04: [dma 0 disabled] [ 0.753851] pnp: PnP ACPI: found 5 devices [ 0.785539] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.785712] NET: Registered PF_INET protocol family [ 0.785874] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.786243] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.786395] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.786542] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.786737] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.786914] TCP: Hash tables configured (established 4096 bind 4096) [ 0.787080] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.787204] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.787355] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.787789] RPC: Registered named UNIX socket transport module. [ 0.787917] RPC: Registered udp transport module. [ 0.788031] RPC: Registered tcp transport module. [ 0.788144] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.788730] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.788936] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.789100] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.789262] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.789410] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.789585] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.789784] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.789919] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.790081] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.790245] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.790391] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.790535] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.790701] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.790824] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.790969] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.791113] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.791259] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.791382] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.791527] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.791718] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.791863] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.791986] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.792131] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.792275] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.792420] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.792555] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.792708] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.792880] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.793078] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.793252] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.793372] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.793512] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.793692] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.793812] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.793952] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.794114] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.794234] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.794408] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.794574] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.794714] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.794853] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.795017] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.795175] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.795329] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.795482] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.795635] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.795825] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.795979] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.796132] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.796285] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.796405] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.796544] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.796697] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.796871] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.797021] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.797172] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.797291] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.797411] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.797532] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.797668] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.797788] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.797933] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.798049] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.798168] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.798291] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.798410] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.798558] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.798696] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.798813] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.798932] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.799048] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.799167] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.799730] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.799976] xen: registering gsi 19 triggering 0 polarity 1 [ 0.800003] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.808868] xen: registering gsi 18 triggering 0 polarity 1 [ 0.808887] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.824927] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 15733 usecs [ 0.825171] xen: registering gsi 18 triggering 0 polarity 1 [ 0.825177] Already setup the GSI :18 [ 0.843020] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 17481 usecs [ 0.843257] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.843432] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.843522] Unpacking initramfs... [ 0.843552] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.843910] kvm: no hardware support for 'kvm_intel' [ 0.851781] has_svm: not amd or hygon [ 0.851894] kvm: no hardware support for 'kvm_amd' [ 0.852011] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.852407] clocksource: Switched to clocksource tsc [ 0.855082] Initialise system trusted keyrings [ 0.855352] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.856840] NFS: Registering the id_resolver key type [ 0.856967] Key type id_resolver registered [ 0.857087] Key type id_legacy registered [ 0.857279] 9p: Installing v9fs 9p2000 file system support [ 0.871233] Key type asymmetric registered [ 0.871359] Asymmetric key parser 'x509' registered [ 0.871495] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.871660] io scheduler mq-deadline registered [ 0.871791] io scheduler kyber registered [ 0.872632] xen: registering gsi 16 triggering 0 polarity 1 [ 0.872662] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.873321] xen: registering gsi 16 triggering 0 polarity 1 [ 0.873327] Already setup the GSI :16 [ 0.873949] xen: registering gsi 16 triggering 0 polarity 1 [ 0.873955] Already setup the GSI :16 [ 0.874331] xen: registering gsi 16 triggering 0 polarity 1 [ 0.874336] Already setup the GSI :16 [ 0.874697] xen: registering gsi 16 triggering 0 polarity 1 [ 0.874701] Already setup the GSI :16 [ 0.875312] xen: registering gsi 16 triggering 0 polarity 1 [ 0.875317] Already setup the GSI :16 [ 0.875941] xen: registering gsi 16 triggering 0 polarity 1 [ 0.875946] Already setup the GSI :16 [ 0.876415] xen: registering gsi 17 triggering 0 polarity 1 [ 0.876431] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.876774] xen: registering gsi 19 triggering 0 polarity 1 [ 0.876779] Already setup the GSI :19 [ 0.877283] xen: registering gsi 16 triggering 0 polarity 1 [ 0.877288] Already setup the GSI :16 [ 0.877955] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.878198] ACPI: button: Power Button [PWRB] [ 0.878360] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.878741] ACPI: button: Power Button [PWRF] [ 0.879020] Monitor-Mwait will be used to enter C-1 state [ 0.879075] Monitor-Mwait will be used to enter C-2 state [ 0.879102] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.879606] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.880105] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.880488] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.880878] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.881237] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.881584] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.881953] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.882766] xen:xen_evtchn: Event-channel device installed [ 0.882968] xen_pciback: backend is vpci [ 0.883785] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.884128] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.884924] hpet_acpi_add: no address or irqs in _CRS [ 0.885168] Non-volatile memory driver v1.3 [ 0.885284] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.888263] loop: module loaded [ 0.894370] ahci 0000:00:1f.2: version 3.0 [ 0.894471] xen: registering gsi 16 triggering 0 polarity 1 [ 0.894481] Already setup the GSI :16 [ 0.894807] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.894958] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.911664] scsi host0: ahci [ 0.912110] scsi host1: ahci [ 0.912498] scsi host2: ahci [ 0.912854] scsi host3: ahci [ 0.913237] scsi host4: ahci [ 0.913573] scsi host5: ahci [ 0.913718] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 0.913865] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 0.914010] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 0.914195] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 0.914340] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 0.914485] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 0.914983] tun: Universal TUN/TAP device driver, 1.6 [ 0.915279] e100: Intel(R) PRO/100 Network Driver [ 0.915398] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.915537] sky2: driver version 1.30 [ 0.915724] xen_netfront: Initialising Xen virtual ethernet driver [ 0.916110] xen: registering gsi 18 triggering 0 polarity 1 [ 0.916120] Already setup the GSI :18 [ 0.916329] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.916518] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.916695] ehci-pci 0000:00:1a.0: debug port 2 [ 0.920843] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.927082] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.927315] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.927464] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.927609] usb usb1: Product: EHCI Host Controller [ 0.927723] usb usb1: Manufacturer: Linux 6.1.109+ ehci_hcd [ 0.927840] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.928140] hub 1-0:1.0: USB hub found [ 0.928266] hub 1-0:1.0: 2 ports detected [ 0.928631] xen: registering gsi 18 triggering 0 polarity 1 [ 0.928641] Already setup the GSI :18 [ 0.928833] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.929067] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.929244] ehci-pci 0000:00:1d.0: debug port 2 [ 0.933338] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.940076] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.940299] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.940448] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.940592] usb usb2: Product: EHCI Host Controller [ 0.940707] usb usb2: Manufacturer: Linux 6.1.109+ ehci_hcd [ 0.940823] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.941126] hub 2-0:1.0: USB hub found [ 0.941252] hub 2-0:1.0: 2 ports detected [ 0.941685] xen: registering gsi 19 triggering 0 polarity 1 [ 0.941694] Already setup the GSI :19 [ 0.941900] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.942110] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.943330] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.943807] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.944016] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.944190] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.944404] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.944553] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.944697] usb usb3: Product: xHCI Host Controller [ 0.944812] usb usb3: Manufacturer: Linux 6.1.109+ xhci-hcd [ 0.944928] usb usb3: SerialNumber: 0000:00:14.0 [ 0.945247] hub 3-0:1.0: USB hub found [ 0.945381] hub 3-0:1.0: 8 ports detected [ 0.946507] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.946686] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.946833] usb usb4: Product: xHCI Host Controller [ 0.946948] usb usb4: Manufacturer: Linux 6.1.109+ xhci-hcd [ 0.947073] usb usb4: SerialNumber: 0000:00:14.0 [ 0.947342] hub 4-0:1.0: USB hub found [ 0.947475] hub 4-0:1.0: 6 ports detected [ 0.948614] usbcore: registered new interface driver usblp [ 0.948754] usbcore: registered new interface driver usb-storage [ 0.951123] Freeing initrd memory: 20624K [ 0.951398] i8042: PNP: No PS/2 controller found. [ 0.951746] rtc_cmos 00:00: RTC can wake from S4 [ 0.952423] rtc_cmos 00:00: registered as rtc0 [ 0.952581] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.952789] device-mapper: uevent: version 1.0.3 [ 0.952907] xen: registering gsi 18 triggering 0 polarity 1 [ 0.952917] Already setup the GSI :18 [ 0.953025] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.953108] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.953234] intel_pstate: CPU model not supported [ 0.953366] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.953468] hid: raw HID events driver (C) Jiri Kosina [ 0.953829] usbcore: registered new interface driver usbhid [ 0.953946] usbhid: USB HID core driver [ 0.954002] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.954584] Initializing XFRM netlink socket [ 0.954791] NET: Registered PF_INET6 protocol family [ 0.955379] Segment Routing with IPv6 [ 0.955499] In-situ OAM (IOAM) with IPv6 [ 0.955642] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.955879] NET: Registered PF_PACKET protocol family [ 0.956055] 9pnet: Installing 9P2000 support [ 0.956183] Key type dns_resolver registered [ 0.956956] IPI shorthand broadcast: enabled [ 0.957121] sched_clock: Marking stable (921061913, 36014878)->(1801023063, -843946272) [ 0.957683] registered taskstats version 1 [ 0.957799] Loading compiled-in X.509 certificates [ 0.960707] PM: Magic number: 8:45:123 [ 0.960882] acpi LNXSYBUS:01: hash matches [ 0.961062] printk: console [netcon0] enabled [ 0.961178] netconsole: network logging started [ 0.961516] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.973821] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.974185] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.974849] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.975057] ALSA device list: [ 0.975179] No soundcards found. [ 1.169122] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.185128] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.185395] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.221872] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.222177] ata5: SATA link down (SStatus 0 SControl 300) [ 1.222335] ata1: SATA link down (SStatus 0 SControl 300) [ 1.222479] ata4: SATA link down (SStatus 0 SControl 300) [ 1.222664] ata2: SATA link down (SStatus 0 SControl 300) [ 1.222806] ata6: SATA link down (SStatus 0 SControl 300) [ 1.223138] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.297665] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.297823] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.298212] hub 1-1:1.0: USB hub found [ 1.298411] hub 1-1:1.0: 4 ports detected [ 1.311510] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.311647] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.312718] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.312875] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.313000] usb 3-3: Product: USB2.0 Hub [ 1.313665] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.313819] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.314080] hub 3-3:1.0: USB hub found [ 1.314333] hub 2-1:1.0: USB hub found [ 1.314522] hub 3-3:1.0: 4 ports detected [ 1.314662] hub 2-1:1.0: 4 ports detected [ 1.339616] ata3.00: configured for UDMA/133 [ 1.340096] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.341096] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.341210] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.341427] sd 2:0:0:0: [sda] Write Protect is off [ 1.341555] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.341628] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.341891] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.360666] sda: sda1 sda2 < sda5 > [ 1.361088] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.362351] Freeing unused kernel image (initmem) memory: 1580K [ 1.362481] Write protecting the kernel read-only data: 22528k [ 1.380683] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.382000] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.431046] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.562818] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.563057] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.564041] hub 3-4:1.0: USB hub found [ 1.564299] hub 3-4:1.0: 4 ports detected [ 1.627045] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.704496] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.704697] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.704890] usb 3-3.2: Product: USB2.0 Hub [ 1.705721] hub 3-3.2:1.0: USB hub found [ 1.706194] hub 3-3.2:1.0: 4 ports detected [ 1.843300] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.843431] Run /init as init process [ 1.843542] with arguments: [ 1.843543] /init [ 1.843544] placeholder [ 1.843545] with environment: [ 1.843545] HOME=/ [ 1.843547] TERM=linux [ 2.287932] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.288134] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.289404] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.289713] xen: registering gsi 16 triggering 0 polarity 1 [ 2.289726] Already setup the GSI :16 [ 2.293823] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.293987] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.294270] xen: registering gsi 16 triggering 0 polarity 1 [ 2.294280] Already setup the GSI :16 [ 2.320917] pps pps0: new PPS source ptp0 [ 2.321199] igb 0000:07:00.0: added PHC on eth0 [ 2.321372] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.321531] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.321737] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.321872] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.322147] xen: registering gsi 17 triggering 0 polarity 1 [ 2.322158] Already setup the GSI :17 [ 2.352001] pps pps1: new PPS source ptp1 [ 2.352289] igb 0000:08:00.0: added PHC on eth1 [ 2.352460] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.352623] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.352845] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.352984] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.353248] xen: registering gsi 16 triggering 0 polarity 1 [ 2.353256] Already setup the GSI :16 [ 2.411505] igb 0000:0b:00.0: added PHC on eth2 [ 2.411682] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.411841] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.412086] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.412212] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.412461] xen: registering gsi 17 triggering 0 polarity 1 [ 2.412470] Already setup the GSI :17 [ 2.468406] igb 0000:0b:00.1: added PHC on eth3 [ 2.468581] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.468741] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.468978] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.469150] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.469405] xen: registering gsi 18 triggering 0 polarity 1 [ 2.469414] Already setup the GSI :18 [ 2.526804] igb 0000:0b:00.2: added PHC on eth4 [ 2.526986] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.527168] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.527413] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.527569] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.527837] xen: registering gsi 19 triggering 0 polarity 1 [ 2.527850] Already setup the GSI :19 [ 2.586202] igb 0000:0b:00.3: added PHC on eth5 [ 2.586384] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.586544] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.586786] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.586939] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.615862] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.623511] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.633283] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.641282] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.653384] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.661510] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 2.907124] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 3.011517] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 3.011675] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.017934] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 3.024006] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.094415] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 3.095999] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 3.096385] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 3.153168] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.153422] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.445461] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.445881] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.446153] xen: registering gsi 17 triggering 0 polarity 1 [ 3.446164] Already setup the GSI :17 [ 4.187997] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.318365] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.318585] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.613956] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.616929] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.624484] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 5.029778] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.037115] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.546879] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.650781] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.680897] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.761706] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.441961] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.442207] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.442419] device enx0cc47a9f87be entered promiscuous mode [ 14.953668] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 15.167269] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 15.167531] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 15.167655] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 15.167938] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready