[ 0.000000] Linux version 6.1.109+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Thu Sep 12 16:25:22 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000460] tsc: Detected 2199.996 MHz processor [ 0.000899] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000902] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000909] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000911] Disabled [ 0.000912] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000916] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000955] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027696] RAMDISK: [mem 0x04000000-0x05424fff] [ 0.027704] ACPI: Early table checksum verification disabled [ 0.028307] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028319] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028356] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028405] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028421] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028437] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028453] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028470] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028486] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028502] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028519] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028535] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028551] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028568] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028584] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028600] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028617] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028633] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028653] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028669] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028686] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028702] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028710] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028712] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028713] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028714] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028715] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028716] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028717] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028718] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028719] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028720] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028721] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028722] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028723] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028724] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028725] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028726] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028727] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028728] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028729] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028730] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028777] Setting APIC routing to Xen PV. [ 0.032818] Zone ranges: [ 0.032819] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032822] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032824] Normal empty [ 0.032825] Movable zone start for each node [ 0.032826] Early memory node ranges [ 0.032826] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032828] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032829] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032834] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032869] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034419] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034424] p2m virtual area at (____ptrval____), size is 40000000 [ 0.222030] Remapped 102 page(s) [ 0.223461] ACPI: PM-Timer IO Port: 0x408 [ 0.223515] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223517] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223519] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223521] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223522] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223524] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223525] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223527] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223555] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223569] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223572] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223598] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223603] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223673] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223688] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223690] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223692] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223693] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223703] Booting kernel on Xen [ 0.223703] Xen version: 4.20-unstable (preserve-AD) [ 0.223707] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229943] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.230225] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.230232] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.230235] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230313] xen: PV spinlocks enabled [ 0.230316] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230321] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230323] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230362] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230371] random: crng init done [ 0.230420] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230445] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231784] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231786] software IO TLB: area num 8. [ 0.291527] Memory: 389288K/524284K available (14349K kernel code, 2686K rwdata, 4576K rodata, 1580K init, 1288K bss, 134744K reserved, 0K cma-reserved) [ 0.291695] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.294201] Dynamic Preempt: voluntary [ 0.294302] rcu: Preemptible hierarchical RCU implementation. [ 0.294303] rcu: RCU event tracing is enabled. [ 0.294304] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.294306] Trampoline variant of Tasks RCU enabled. [ 0.294307] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.294308] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.304890] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.305015] xen:events: Using FIFO-based ABI [ 0.305046] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.305055] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.305062] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.305070] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.305078] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.305085] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.305093] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.305100] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.305108] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.305115] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.305123] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.305131] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.305139] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.305146] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.305156] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.305166] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.310518] Console: colour VGA+ 80x25 [ 0.325248] printk: console [tty0] enabled [ 0.326587] printk: console [hvc0] enabled [ 0.326723] ACPI: Core revision 20220331 [ 0.342199] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.342364] Xen: using vcpuop timer interface [ 0.342372] installing Xen timer for CPU 0 [ 0.342523] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.342682] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199996) [ 0.343011] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.343128] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.343255] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.343404] Spectre V2 : Mitigation: Retpolines [ 0.343688] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.343846] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.343965] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.344086] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.344233] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.344351] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.344502] MDS: Mitigation: Clear CPU buffers [ 0.344615] TAA: Mitigation: Clear CPU buffers [ 0.344686] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.344851] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.344995] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.345120] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.345239] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.345358] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.362996] Freeing SMP alternatives memory: 40K [ 0.363123] pid_max: default: 32768 minimum: 301 [ 0.363703] LSM: Security Framework initializing [ 0.363826] SELinux: Initializing. [ 0.363964] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364144] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364773] cpu 0 spinlock event irq 25 [ 0.364893] VPMU disabled by hypervisor. [ 0.365333] cblist_init_generic: Setting adjustable number of callback queues. [ 0.365479] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.365635] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.365687] signal: max sigframe size: 1776 [ 0.365850] rcu: Hierarchical SRCU implementation. [ 0.365970] rcu: Max phase no-delay instances is 400. [ 0.366466] smp: Bringing up secondary CPUs ... [ 0.366804] installing Xen timer for CPU 1 [ 0.367273] cpu 1 spinlock event irq 35 [ 0.367826] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.367994] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.368181] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.368943] installing Xen timer for CPU 2 [ 0.369413] cpu 2 spinlock event irq 41 [ 0.369823] installing Xen timer for CPU 3 [ 0.370288] cpu 3 spinlock event irq 47 [ 0.370694] installing Xen timer for CPU 4 [ 0.371163] cpu 4 spinlock event irq 53 [ 0.371163] installing Xen timer for CPU 5 [ 0.371975] cpu 5 spinlock event irq 59 [ 0.371975] installing Xen timer for CPU 6 [ 0.372860] cpu 6 spinlock event irq 65 [ 0.372941] installing Xen timer for CPU 7 [ 0.373713] cpu 7 spinlock event irq 71 [ 0.373887] smp: Brought up 1 node, 8 CPUs [ 0.374006] smpboot: Max logical packages: 1 [ 0.374222] devtmpfs: initialized [ 0.374719] x86/mm: Memory block size: 128MB [ 0.375059] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.375059] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.375132] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.375819] PM: RTC time: 17:24:43, date: 2024-09-12 [ 0.376083] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.376230] xen:grant_table: Grant tables using version 1 layout [ 0.376372] Grant table initialized [ 0.376699] audit: initializing netlink subsys (disabled) [ 0.376841] audit: type=2000 audit(1726161884.066:1): state=initialized audit_enabled=0 res=1 [ 0.376841] thermal_sys: Registered thermal governor 'step_wise' [ 0.376841] thermal_sys: Registered thermal governor 'user_space' [ 0.376882] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.377766] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.377920] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.506656] PCI: Using configuration type 1 for base access [ 0.509263] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.509753] ACPI: Added _OSI(Module Device) [ 0.509849] ACPI: Added _OSI(Processor Device) [ 0.509962] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.510076] ACPI: Added _OSI(Processor Aggregator Device) [ 0.540668] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.542670] xen: registering gsi 9 triggering 0 polarity 0 [ 0.545249] ACPI: Dynamic OEM Table Load: [ 0.554102] ACPI: Interpreter enabled [ 0.554236] ACPI: PM: (supports S0 S4 S5) [ 0.554356] ACPI: Using IOAPIC for interrupt routing [ 0.554503] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.554653] PCI: Using E820 reservations for host bridge windows [ 0.555167] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.588708] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.588838] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.589074] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.589337] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.589458] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.589634] PCI host bridge to bus 0000:ff [ 0.589686] pci_bus 0000:ff: root bus resource [bus ff] [ 0.589913] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.590374] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.590813] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.591248] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.591705] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.592139] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.592572] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.592998] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.593459] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.593907] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.594339] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.594779] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.595216] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.595663] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.596012] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.596445] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.596883] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.597320] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.597577] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.598039] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.598522] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.599004] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.599484] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.599965] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.600445] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.600920] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.601356] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.601803] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.602282] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.602761] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.603241] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.603721] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.604156] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.604591] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.605000] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.605442] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.605923] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.606401] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.606884] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.607414] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.607859] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.608292] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.608736] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.608994] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.609443] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.609882] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.610321] pci_bus 0000:ff: on NUMA node 0 [ 0.614625] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.614688] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.614966] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.615310] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.615430] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.615914] PCI host bridge to bus 0000:00 [ 0.616029] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.616150] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.616271] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.616415] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.616559] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.616738] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.617397] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.617938] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.618313] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.618859] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.619255] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.619787] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.620169] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.620700] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.621083] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.621629] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.622937] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.623471] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.623862] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.624453] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.625094] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.625781] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.626002] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.626481] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.626834] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.627055] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.627529] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.627846] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.628067] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.628546] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.628915] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.629121] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.629669] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.629890] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.630454] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.630656] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.630693] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.637861] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.638430] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.638628] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.639694] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.639990] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.640566] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.640764] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.640886] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.641176] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.641747] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.641945] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.642066] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.642396] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.642596] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.643125] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.643455] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.644234] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.644431] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.644590] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.644728] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.644887] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.645046] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.645204] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.645525] pci 0000:00:1f.2: PME# supported from D3hot [ 0.645813] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.646033] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.646281] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.646665] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.646791] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.647523] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.647824] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.648170] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.648385] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.649158] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.649375] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.650102] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.650318] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.651049] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.651265] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.651982] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.652118] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.652465] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.652680] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.652972] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.653157] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.653516] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.653740] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.653862] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.654068] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.654188] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.654782] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.654999] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.655316] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.655501] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.655861] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.656067] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.656188] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.656393] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.656545] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.657105] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.657241] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.657380] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.657675] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.657990] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.658362] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.658482] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.658693] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.658912] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.659079] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.659629] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.660036] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.660162] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.660291] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.660653] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.660685] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.660894] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.661112] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.661279] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.661818] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.662290] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.662416] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.662545] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.662895] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.663300] pci 0000:09:00.0: enabling Extended Tags [ 0.663647] pci 0000:09:00.0: supports D1 D2 [ 0.663684] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.664047] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.664174] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.664304] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.664619] pci_bus 0000:0a: extended config space not accessible [ 0.664739] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.664946] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.665115] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.665283] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.665642] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.665832] pci 0000:0a:00.0: supports D1 D2 [ 0.665944] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.666389] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.666528] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.666658] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.666962] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.667165] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.667381] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.667543] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.668065] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.668307] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.668455] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.668675] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.668817] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.669384] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.669587] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.669777] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.669940] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.670462] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.670696] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.670841] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.671066] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.671210] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.671735] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.671938] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.672149] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.672311] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.672839] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.673072] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.673216] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.673435] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.673579] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.674065] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.674268] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.674480] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.674645] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.675089] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.675321] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.675465] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.675684] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.675828] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.676417] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.676543] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.676672] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.676815] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.677299] pci_bus 0000:00: on NUMA node 0 [ 0.677394] xen: registering gsi 13 triggering 1 polarity 0 [ 0.678390] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.678588] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.678761] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.678952] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.679146] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.679264] ACPI: PCI: Interrupt link LNKE disabled [ 0.679449] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.679568] ACPI: PCI: Interrupt link LNKF disabled [ 0.679758] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.679877] ACPI: PCI: Interrupt link LNKG disabled [ 0.680062] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.680180] ACPI: PCI: Interrupt link LNKH disabled [ 0.680445] xen:balloon: Initialising balloon driver [ 0.680772] iommu: Default domain type: Translated [ 0.687688] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.687874] SCSI subsystem initialized [ 0.688720] libata version 3.00 loaded. [ 0.688722] ACPI: bus type USB registered [ 0.688850] usbcore: registered new interface driver usbfs [ 0.688972] usbcore: registered new interface driver hub [ 0.689093] usbcore: registered new device driver usb [ 0.689219] pps_core: LinuxPPS API ver. 1 registered [ 0.689219] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.689219] PTP clock support registered [ 0.689729] Advanced Linux Sound Architecture Driver Initialized. [ 0.689976] NetLabel: Initializing [ 0.690088] NetLabel: domain hash size = 128 [ 0.690200] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.690200] NetLabel: unlabeled traffic allowed by default [ 0.690711] PCI: Using ACPI for IRQ routing [ 0.726594] PCI: pci_cache_line_size set to 64 bytes [ 0.727403] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.727405] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.727723] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.727844] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.727964] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.727964] vgaarb: loaded [ 0.729683] clocksource: Switched to clocksource tsc-early [ 0.729932] VFS: Disk quotas dquot_6.6.0 [ 0.730057] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.730201] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.730357] pnp: PnP ACPI init [ 0.730840] xen: registering gsi 8 triggering 1 polarity 0 [ 0.731035] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.731162] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.731281] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.731399] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.731517] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.731635] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.731780] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.731904] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.732024] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.732144] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.732271] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.732391] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.732511] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.732945] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.733071] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.733189] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.733307] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.733425] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.733862] xen: registering gsi 4 triggering 1 polarity 0 [ 0.733867] Already setup the GSI :4 [ 0.733980] pnp 00:03: [dma 0 disabled] [ 0.734291] xen: registering gsi 3 triggering 1 polarity 0 [ 0.734302] pnp 00:04: [dma 0 disabled] [ 0.734920] pnp: PnP ACPI: found 5 devices [ 0.766320] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.766478] NET: Registered PF_INET protocol family [ 0.766637] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.767025] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.767178] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.767324] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.767475] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.767643] TCP: Hash tables configured (established 4096 bind 4096) [ 0.767840] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.767990] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.768143] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.768567] RPC: Registered named UNIX socket transport module. [ 0.768709] RPC: Registered udp transport module. [ 0.768830] RPC: Registered tcp transport module. [ 0.768943] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.769495] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.769678] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.769865] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.770026] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.770173] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.770350] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.770525] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.770660] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.770847] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.770972] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.771123] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.771266] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.771411] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.771533] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.771676] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.771838] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.771986] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.772108] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.772253] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.772396] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.772545] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.772667] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.772832] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.772978] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.773123] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.773258] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.773392] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.773563] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.773760] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.773955] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.774076] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.774215] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.774377] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.774496] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.774635] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.774824] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.774947] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.775088] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.775260] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.775380] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.775519] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.775695] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.775866] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.776021] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.776174] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.776326] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.776478] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.776638] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.776805] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.776959] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.777078] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.777218] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.777352] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.777525] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.777674] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.777810] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.777931] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.778058] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.778178] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.778297] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.778416] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.778560] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.778676] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.778817] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.778936] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.779054] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.779171] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.779290] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.779414] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.779533] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.779648] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.779782] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.780338] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.780559] xen: registering gsi 19 triggering 0 polarity 1 [ 0.780588] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.789462] xen: registering gsi 18 triggering 0 polarity 1 [ 0.789482] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.804999] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 15224 usecs [ 0.805245] xen: registering gsi 18 triggering 0 polarity 1 [ 0.805251] Already setup the GSI :18 [ 0.821912] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 16329 usecs [ 0.822128] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.822304] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.822376] Unpacking initramfs... [ 0.822432] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.822782] kvm: no hardware support for 'kvm_intel' [ 0.830552] has_svm: not amd or hygon [ 0.830668] kvm: no hardware support for 'kvm_amd' [ 0.830802] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.831255] clocksource: Switched to clocksource tsc [ 0.833635] Initialise system trusted keyrings [ 0.833894] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.835464] NFS: Registering the id_resolver key type [ 0.835601] Key type id_resolver registered [ 0.835718] Key type id_legacy registered [ 0.835906] 9p: Installing v9fs 9p2000 file system support [ 0.850379] Key type asymmetric registered [ 0.850505] Asymmetric key parser 'x509' registered [ 0.850652] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.850807] io scheduler mq-deadline registered [ 0.850920] io scheduler kyber registered [ 0.851803] xen: registering gsi 16 triggering 0 polarity 1 [ 0.851832] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.852374] xen: registering gsi 16 triggering 0 polarity 1 [ 0.852380] Already setup the GSI :16 [ 0.853080] xen: registering gsi 16 triggering 0 polarity 1 [ 0.853086] Already setup the GSI :16 [ 0.853413] xen: registering gsi 16 triggering 0 polarity 1 [ 0.853418] Already setup the GSI :16 [ 0.853760] xen: registering gsi 16 triggering 0 polarity 1 [ 0.853764] Already setup the GSI :16 [ 0.854389] xen: registering gsi 16 triggering 0 polarity 1 [ 0.854394] Already setup the GSI :16 [ 0.854989] xen: registering gsi 16 triggering 0 polarity 1 [ 0.854994] Already setup the GSI :16 [ 0.855440] xen: registering gsi 17 triggering 0 polarity 1 [ 0.855457] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.855854] xen: registering gsi 19 triggering 0 polarity 1 [ 0.855859] Already setup the GSI :19 [ 0.856304] xen: registering gsi 16 triggering 0 polarity 1 [ 0.856308] Already setup the GSI :16 [ 0.856991] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.857206] ACPI: button: Power Button [PWRB] [ 0.857351] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.857619] ACPI: button: Power Button [PWRF] [ 0.857921] Monitor-Mwait will be used to enter C-1 state [ 0.857959] Monitor-Mwait will be used to enter C-2 state [ 0.857975] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.858370] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.858813] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.859166] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.859506] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.859990] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.860351] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.860684] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.861454] xen:xen_evtchn: Event-channel device installed [ 0.861707] xen_pciback: backend is vpci [ 0.862485] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.862849] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.863575] hpet_acpi_add: no address or irqs in _CRS [ 0.863768] Non-volatile memory driver v1.3 [ 0.863883] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.866560] loop: module loaded [ 0.872641] ahci 0000:00:1f.2: version 3.0 [ 0.872743] xen: registering gsi 16 triggering 0 polarity 1 [ 0.872753] Already setup the GSI :16 [ 0.873080] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.873230] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.889181] scsi host0: ahci [ 0.889667] scsi host1: ahci [ 0.890033] scsi host2: ahci [ 0.890367] scsi host3: ahci [ 0.890752] scsi host4: ahci [ 0.891098] scsi host5: ahci [ 0.891250] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 0.891396] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 0.891554] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 0.891700] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 0.891876] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 0.892020] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 0.892450] tun: Universal TUN/TAP device driver, 1.6 [ 0.892739] e100: Intel(R) PRO/100 Network Driver [ 0.892873] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.893012] sky2: driver version 1.30 [ 0.893233] xen_netfront: Initialising Xen virtual ethernet driver [ 0.893614] xen: registering gsi 18 triggering 0 polarity 1 [ 0.893624] Already setup the GSI :18 [ 0.893835] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.894059] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.894236] ehci-pci 0000:00:1a.0: debug port 2 [ 0.898388] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.904552] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.904781] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.904929] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.905073] usb usb1: Product: EHCI Host Controller [ 0.905187] usb usb1: Manufacturer: Linux 6.1.109+ ehci_hcd [ 0.905302] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.905631] hub 1-0:1.0: USB hub found [ 0.905755] hub 1-0:1.0: 2 ports detected [ 0.906116] xen: registering gsi 18 triggering 0 polarity 1 [ 0.906125] Already setup the GSI :18 [ 0.906319] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.906524] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.906701] ehci-pci 0000:00:1d.0: debug port 2 [ 0.910795] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.917568] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.917792] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.917940] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.918115] usb usb2: Product: EHCI Host Controller [ 0.918230] usb usb2: Manufacturer: Linux 6.1.109+ ehci_hcd [ 0.918345] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.918625] hub 2-0:1.0: USB hub found [ 0.918750] hub 2-0:1.0: 2 ports detected [ 0.919178] xen: registering gsi 19 triggering 0 polarity 1 [ 0.919188] Already setup the GSI :19 [ 0.919398] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.919616] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.920864] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.921336] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.921545] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.921693] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.921896] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.922043] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.922187] usb usb3: Product: xHCI Host Controller [ 0.922334] usb usb3: Manufacturer: Linux 6.1.109+ xhci-hcd [ 0.922449] usb usb3: SerialNumber: 0000:00:14.0 [ 0.922738] hub 3-0:1.0: USB hub found [ 0.922870] hub 3-0:1.0: 8 ports detected [ 0.923992] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.924164] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.924311] usb usb4: Product: xHCI Host Controller [ 0.924425] usb usb4: Manufacturer: Linux 6.1.109+ xhci-hcd [ 0.924553] usb usb4: SerialNumber: 0000:00:14.0 [ 0.924812] hub 4-0:1.0: USB hub found [ 0.924944] hub 4-0:1.0: 6 ports detected [ 0.926101] usbcore: registered new interface driver usblp [ 0.926241] usbcore: registered new interface driver usb-storage [ 0.928610] Freeing initrd memory: 20628K [ 0.928791] i8042: PNP: No PS/2 controller found. [ 0.929147] rtc_cmos 00:00: RTC can wake from S4 [ 0.929796] rtc_cmos 00:00: registered as rtc0 [ 0.929953] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.930159] device-mapper: uevent: version 1.0.3 [ 0.930260] xen: registering gsi 18 triggering 0 polarity 1 [ 0.930283] Already setup the GSI :18 [ 0.930369] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.930431] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.930561] intel_pstate: CPU model not supported [ 0.930616] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.930717] hid: raw HID events driver (C) Jiri Kosina [ 0.931175] usbcore: registered new interface driver usbhid [ 0.931246] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.931292] usbhid: USB HID core driver [ 0.931952] Initializing XFRM netlink socket [ 0.932186] NET: Registered PF_INET6 protocol family [ 0.932719] Segment Routing with IPv6 [ 0.932838] In-situ OAM (IOAM) with IPv6 [ 0.932979] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.933219] NET: Registered PF_PACKET protocol family [ 0.933376] 9pnet: Installing 9P2000 support [ 0.933502] Key type dns_resolver registered [ 0.934242] IPI shorthand broadcast: enabled [ 0.934381] sched_clock: Marking stable (896688401, 37511750)->(1779326480, -845126329) [ 0.934959] registered taskstats version 1 [ 0.935074] Loading compiled-in X.509 certificates [ 0.938004] PM: Magic number: 8:99:441 [ 0.938234] printk: console [netcon0] enabled [ 0.938350] netconsole: network logging started [ 0.938745] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.951036] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.951375] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.951605] ALSA device list: [ 0.951734] No soundcards found. [ 0.952058] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 1.145620] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.161663] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.161867] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.198447] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.198749] ata6: SATA link down (SStatus 0 SControl 300) [ 1.198969] ata2: SATA link down (SStatus 0 SControl 300) [ 1.199125] ata5: SATA link down (SStatus 0 SControl 300) [ 1.199265] ata1: SATA link down (SStatus 0 SControl 300) [ 1.199419] ata4: SATA link down (SStatus 0 SControl 300) [ 1.199711] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.281087] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.281243] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.281618] hub 1-1:1.0: USB hub found [ 1.281836] hub 1-1:1.0: 4 ports detected [ 1.285221] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.285351] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.289453] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.289618] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.289748] usb 3-3: Product: USB2.0 Hub [ 1.290335] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.290486] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.290749] hub 3-3:1.0: USB hub found [ 1.290896] hub 2-1:1.0: USB hub found [ 1.291089] hub 2-1:1.0: 4 ports detected [ 1.291342] hub 3-3:1.0: 4 ports detected [ 1.313118] ata3.00: configured for UDMA/133 [ 1.313476] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.314332] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.314431] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.314645] sd 2:0:0:0: [sda] Write Protect is off [ 1.314790] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.314859] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.315093] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.334261] sda: sda1 sda2 < sda5 > [ 1.334763] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.335967] Freeing unused kernel image (initmem) memory: 1580K [ 1.336096] Write protecting the kernel read-only data: 22528k [ 1.354478] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.355783] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.814288] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.814469] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.814480] Run /init as init process [ 1.814726] with arguments: [ 1.814727] /init [ 1.814729] placeholder [ 1.814730] with environment: [ 1.814731] HOME=/ [ 1.814732] TERM=linux [ 1.940833] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.940995] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.941704] hub 3-4:1.0: USB hub found [ 1.941934] hub 3-4:1.0: 4 ports detected [ 2.004610] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 2.083033] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 2.083192] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.083337] usb 3-3.2: Product: USB2.0 Hub [ 2.084216] hub 3-3.2:1.0: USB hub found [ 2.084658] hub 3-3.2:1.0: 4 ports detected [ 2.236557] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 2.257569] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.257756] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.258175] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.258396] xen: registering gsi 16 triggering 0 polarity 1 [ 2.258407] Already setup the GSI :16 [ 2.262259] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.262384] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.262606] xen: registering gsi 16 triggering 0 polarity 1 [ 2.262615] Already setup the GSI :16 [ 2.289046] pps pps0: new PPS source ptp0 [ 2.289252] igb 0000:07:00.0: added PHC on eth0 [ 2.289386] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.289553] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.289719] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.289834] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.290067] xen: registering gsi 17 triggering 0 polarity 1 [ 2.290076] Already setup the GSI :17 [ 2.319639] pps pps1: new PPS source ptp1 [ 2.319818] igb 0000:08:00.0: added PHC on eth1 [ 2.319952] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.320104] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.320269] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.320384] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.320624] xen: registering gsi 16 triggering 0 polarity 1 [ 2.320631] Already setup the GSI :16 [ 2.342966] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 2.343128] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.348986] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 2.378520] igb 0000:0b:00.0: added PHC on eth2 [ 2.378674] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.378796] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.378999] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.379114] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.379340] xen: registering gsi 17 triggering 0 polarity 1 [ 2.379350] Already setup the GSI :17 [ 2.432745] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 2.434019] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 2.434365] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.437489] igb 0000:0b:00.1: added PHC on eth3 [ 2.437656] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.437778] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.437987] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.438102] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.438325] xen: registering gsi 18 triggering 0 polarity 1 [ 2.438333] Already setup the GSI :18 [ 2.496184] igb 0000:0b:00.2: added PHC on eth4 [ 2.496328] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.496449] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.496667] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.496786] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.497036] xen: registering gsi 19 triggering 0 polarity 1 [ 2.497046] Already setup the GSI :19 [ 2.554678] igb 0000:0b:00.3: added PHC on eth5 [ 2.554821] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.554942] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.555145] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.555260] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.558820] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.572968] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.585718] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.600263] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 2.608730] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.620858] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.994318] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.123847] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.123976] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.413800] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.414115] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.414333] xen: registering gsi 17 triggering 0 polarity 1 [ 3.414344] Already setup the GSI :17 [ 4.155032] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.284642] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.284900] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.581507] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.583875] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 4.591988] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.994694] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.002775] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.605683] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.800130] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.821258] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.908177] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.458792] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.458967] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.459142] device enx0cc47a9f87be entered promiscuous mode [ 15.006070] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 15.111859] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 15.112143] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 15.112267] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 15.112572] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready