[ 0.000000] Linux version 6.1.110+ (osstest@himrod0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Fri Sep 13 07:46:01 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000459] tsc: Detected 2199.998 MHz processor [ 0.000898] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000902] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000908] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000910] Disabled [ 0.000911] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000915] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000954] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027719] RAMDISK: [mem 0x04000000-0x05424fff] [ 0.027728] ACPI: Early table checksum verification disabled [ 0.028327] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028339] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028375] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028424] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028440] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028456] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028472] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028488] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028504] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028520] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028536] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028552] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028568] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028584] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028601] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028616] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028632] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028649] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028665] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028681] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028697] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028713] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028721] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028723] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028725] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028725] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028727] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028727] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028729] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028729] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028730] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028731] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028732] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028733] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028735] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028735] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028736] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028737] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028738] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028739] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028740] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028741] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028786] Setting APIC routing to Xen PV. [ 0.032742] Zone ranges: [ 0.032743] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032745] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032747] Normal empty [ 0.032748] Movable zone start for each node [ 0.032749] Early memory node ranges [ 0.032749] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032751] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032753] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032758] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032794] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034355] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034361] p2m virtual area at (____ptrval____), size is 40000000 [ 0.222011] Remapped 102 page(s) [ 0.223389] ACPI: PM-Timer IO Port: 0x408 [ 0.223445] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223448] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223450] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223451] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223453] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223454] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223456] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223458] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223486] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223500] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223503] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223530] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223535] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223605] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223620] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223622] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223623] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223625] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223630] Booting kernel on Xen [ 0.223631] Xen version: 4.20-unstable (preserve-AD) [ 0.223634] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229876] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.230162] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.230168] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.230172] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230253] xen: PV spinlocks enabled [ 0.230256] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230261] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230263] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230300] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230309] random: crng init done [ 0.230358] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230384] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231708] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231711] software IO TLB: area num 8. [ 0.291258] Memory: 389288K/524284K available (14349K kernel code, 2686K rwdata, 4584K rodata, 1580K init, 1288K bss, 134744K reserved, 0K cma-reserved) [ 0.291425] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.293916] Dynamic Preempt: voluntary [ 0.294016] rcu: Preemptible hierarchical RCU implementation. [ 0.294017] rcu: RCU event tracing is enabled. [ 0.294017] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.294019] Trampoline variant of Tasks RCU enabled. [ 0.294020] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.294021] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.304522] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.304648] xen:events: Using FIFO-based ABI [ 0.304671] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.304681] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.304689] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.304696] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.304703] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.304711] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.304718] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.304726] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.304733] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.304741] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.304748] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.304756] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.304763] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.304771] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.304778] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.304789] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.310154] Console: colour VGA+ 80x25 [ 0.324971] printk: console [tty0] enabled [ 0.326299] printk: console [hvc0] enabled [ 0.326438] ACPI: Core revision 20220331 [ 0.341932] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.342099] Xen: using vcpuop timer interface [ 0.342106] installing Xen timer for CPU 0 [ 0.342256] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.342417] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199998) [ 0.342745] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.342866] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.342994] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.343143] Spectre V2 : Mitigation: Retpolines [ 0.343423] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.343570] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.343689] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.343811] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.343959] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.344078] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.344230] MDS: Mitigation: Clear CPU buffers [ 0.344344] TAA: Mitigation: Clear CPU buffers [ 0.344420] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.344587] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.344734] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.344879] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.344999] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.345118] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.362810] Freeing SMP alternatives memory: 40K [ 0.362941] pid_max: default: 32768 minimum: 301 [ 0.363438] LSM: Security Framework initializing [ 0.363564] SELinux: Initializing. [ 0.363711] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363858] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364508] cpu 0 spinlock event irq 25 [ 0.364628] VPMU disabled by hypervisor. [ 0.365066] cblist_init_generic: Setting adjustable number of callback queues. [ 0.365213] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.365370] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.365422] signal: max sigframe size: 1776 [ 0.365585] rcu: Hierarchical SRCU implementation. [ 0.365708] rcu: Max phase no-delay instances is 400. [ 0.366198] smp: Bringing up secondary CPUs ... [ 0.366534] installing Xen timer for CPU 1 [ 0.367128] cpu 1 spinlock event irq 35 [ 0.367567] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.367738] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.367934] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.368643] installing Xen timer for CPU 2 [ 0.369099] cpu 2 spinlock event irq 41 [ 0.369506] installing Xen timer for CPU 3 [ 0.370023] cpu 3 spinlock event irq 47 [ 0.370023] installing Xen timer for CPU 4 [ 0.370863] cpu 4 spinlock event irq 53 [ 0.370863] installing Xen timer for CPU 5 [ 0.371751] cpu 5 spinlock event irq 59 [ 0.371751] installing Xen timer for CPU 6 [ 0.372683] cpu 6 spinlock event irq 65 [ 0.372699] installing Xen timer for CPU 7 [ 0.373563] cpu 7 spinlock event irq 71 [ 0.373607] smp: Brought up 1 node, 8 CPUs [ 0.373728] smpboot: Max logical packages: 1 [ 0.374459] devtmpfs: initialized [ 0.374597] x86/mm: Memory block size: 128MB [ 0.374942] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.375429] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.375586] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.375845] PM: RTC time: 08:21:05, date: 2024-09-13 [ 0.376091] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.376237] xen:grant_table: Grant tables using version 1 layout [ 0.376374] Grant table initialized [ 0.376623] audit: initializing netlink subsys (disabled) [ 0.376764] audit: type=2000 audit(1726215665.775:1): state=initialized audit_enabled=0 res=1 [ 0.376764] thermal_sys: Registered thermal governor 'step_wise' [ 0.376764] thermal_sys: Registered thermal governor 'user_space' [ 0.376764] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.377591] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.377755] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.505222] PCI: Using configuration type 1 for base access [ 0.507852] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.508479] ACPI: Added _OSI(Module Device) [ 0.508479] ACPI: Added _OSI(Processor Device) [ 0.508536] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.508650] ACPI: Added _OSI(Processor Aggregator Device) [ 0.538971] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.540987] xen: registering gsi 9 triggering 0 polarity 0 [ 0.543615] ACPI: Dynamic OEM Table Load: [ 0.551271] ACPI: Interpreter enabled [ 0.551404] ACPI: PM: (supports S0 S4 S5) [ 0.551420] ACPI: Using IOAPIC for interrupt routing [ 0.551567] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.551752] PCI: Using E820 reservations for host bridge windows [ 0.552327] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.587082] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.587218] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.587461] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.587766] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.587891] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.588071] PCI host bridge to bus 0000:ff [ 0.588184] pci_bus 0000:ff: root bus resource [bus ff] [ 0.588378] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.588780] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.589209] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.589676] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.590124] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.590571] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.591021] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.591448] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.591938] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.592377] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.592754] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.593182] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.593648] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.594075] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.594532] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.594980] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.595408] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.595877] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.596134] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.596667] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.597151] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.597671] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.598145] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.598653] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.599134] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.599634] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.600074] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.600521] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.601019] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.601497] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.602003] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.602476] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.602933] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.603359] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.603767] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.604202] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.604711] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.605193] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.605702] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.606223] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.606701] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.607133] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.607566] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.607822] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.608259] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.608696] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.609127] pci_bus 0000:ff: on NUMA node 0 [ 0.613441] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.613569] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.613846] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.614188] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.614308] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.614756] PCI host bridge to bus 0000:00 [ 0.614871] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.614993] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.615117] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.615263] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.615408] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.615591] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.616234] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.616756] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.617135] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.617658] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.618045] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.618562] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.618917] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.619433] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.619809] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.620366] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.620663] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.621186] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.621563] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.622138] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.622762] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.623430] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.623648] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.624115] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.624460] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.624679] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.625144] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.625456] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.625674] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.626137] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.626496] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.626696] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.627232] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.627553] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.628101] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.628300] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.628419] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.636615] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.637178] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.637374] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.637428] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.637717] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.638278] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.638472] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.638595] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.638879] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.639439] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.639634] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.639756] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.640078] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.640276] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.640815] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.641138] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.641889] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.642090] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.642249] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.642406] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.642461] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.642619] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.642777] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.643089] pci 0000:00:1f.2: PME# supported from D3hot [ 0.643371] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.643517] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.643762] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.644140] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.644359] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.646019] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.646313] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.646638] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.646850] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.647631] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.647845] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.648552] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.648765] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.648765] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.648765] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.649385] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.649415] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.649415] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.649415] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.649415] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.651460] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.651811] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.652032] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.652154] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.652366] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.652419] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.652990] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.653204] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.653487] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.653678] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.654027] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.654229] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.654351] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.654470] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.654591] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.655146] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.655280] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.655419] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.655711] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.656002] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.656366] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.656419] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.656626] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.656847] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.657014] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.657548] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.658016] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.658142] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.658271] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.658625] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.658745] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.658954] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.659186] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.659352] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.659830] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.660294] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.660429] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.660558] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.660897] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.661293] pci 0000:09:00.0: enabling Extended Tags [ 0.661630] pci 0000:09:00.0: supports D1 D2 [ 0.661777] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.662132] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.662259] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.662387] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.662601] pci_bus 0000:0a: extended config space not accessible [ 0.662773] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.662982] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.663150] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.663317] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.663656] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.663946] pci 0000:0a:00.0: supports D1 D2 [ 0.664060] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.664509] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.664648] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.664778] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.665168] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.665369] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.665509] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.665678] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.666193] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.666430] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.666576] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.666794] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.666941] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.667499] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.667701] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.667910] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.668073] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.668591] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.668820] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.668968] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.669186] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.669331] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.669804] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.670006] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.670215] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.670377] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.670814] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.671046] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.671191] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.671409] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.671553] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.672071] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.672272] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.672491] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.672653] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.673164] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.673393] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.673419] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.673643] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.673788] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.674367] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.674429] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.674558] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.674701] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.675169] pci_bus 0000:00: on NUMA node 0 [ 0.675262] xen: registering gsi 13 triggering 1 polarity 0 [ 0.676222] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.676426] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.676621] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.676810] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.676999] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.677118] ACPI: PCI: Interrupt link LNKE disabled [ 0.677301] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.677419] ACPI: PCI: Interrupt link LNKF disabled [ 0.677605] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.677730] ACPI: PCI: Interrupt link LNKG disabled [ 0.677914] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.678032] ACPI: PCI: Interrupt link LNKH disabled [ 0.678296] xen:balloon: Initialising balloon driver [ 0.678533] iommu: Default domain type: Translated [ 0.685423] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.685616] SCSI subsystem initialized [ 0.686457] libata version 3.00 loaded. [ 0.686479] ACPI: bus type USB registered [ 0.686609] usbcore: registered new interface driver usbfs [ 0.686753] usbcore: registered new interface driver hub [ 0.686916] usbcore: registered new device driver usb [ 0.686916] pps_core: LinuxPPS API ver. 1 registered [ 0.686916] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.686916] PTP clock support registered [ 0.687473] Advanced Linux Sound Architecture Driver Initialized. [ 0.687752] NetLabel: Initializing [ 0.687867] NetLabel: domain hash size = 128 [ 0.687867] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.687867] NetLabel: unlabeled traffic allowed by default [ 0.688457] PCI: Using ACPI for IRQ routing [ 0.725045] PCI: pci_cache_line_size set to 64 bytes [ 0.725892] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.725896] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.726477] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.726602] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.726726] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.726726] vgaarb: loaded [ 0.728438] clocksource: Switched to clocksource tsc-early [ 0.741020] VFS: Disk quotas dquot_6.6.0 [ 0.741173] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.741321] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.741502] pnp: PnP ACPI init [ 0.741989] xen: registering gsi 8 triggering 1 polarity 0 [ 0.742165] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.742289] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.742409] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.742548] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.742667] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.742786] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.742912] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.743034] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.743154] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.743275] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.743395] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.743530] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.743650] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.744047] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.744169] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.744294] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.744413] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.744552] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.744954] xen: registering gsi 4 triggering 1 polarity 0 [ 0.744958] Already setup the GSI :4 [ 0.745070] pnp 00:03: [dma 0 disabled] [ 0.745375] xen: registering gsi 3 triggering 1 polarity 0 [ 0.745386] pnp 00:04: [dma 0 disabled] [ 0.745969] pnp: PnP ACPI: found 5 devices [ 0.777545] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.777697] NET: Registered PF_INET protocol family [ 0.777858] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.778227] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.778378] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.778562] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.778741] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.778920] TCP: Hash tables configured (established 4096 bind 4096) [ 0.779062] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.779185] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.779338] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.779694] RPC: Registered named UNIX socket transport module. [ 0.779819] RPC: Registered udp transport module. [ 0.779933] RPC: Registered tcp transport module. [ 0.780046] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.780587] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.780759] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.780923] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.781085] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.781232] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.781407] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.781619] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.781770] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.781933] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.782057] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.782202] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.782346] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.782513] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.782638] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.782783] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.782927] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.783079] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.783202] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.783347] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.783501] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.783651] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.783775] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.783920] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.784065] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.784210] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.784345] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.784496] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.784669] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.784842] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.785016] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.785136] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.785275] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.785451] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.785571] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.785710] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.785881] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.786001] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.786143] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.786308] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.786442] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.786581] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.786745] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.786902] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.787056] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.787218] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.787371] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.787537] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.787691] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.787845] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.787999] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.788119] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.788258] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.788392] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.788584] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.788734] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.788853] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.788972] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.789093] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.789215] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.789334] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.789467] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.789613] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.789729] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.789848] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.789969] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.790101] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.790217] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.790336] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.790467] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.790587] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.790703] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.790822] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.791352] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.791594] xen: registering gsi 19 triggering 0 polarity 1 [ 0.791621] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.800457] xen: registering gsi 18 triggering 0 polarity 1 [ 0.800482] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.817882] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 17091 usecs [ 0.818178] xen: registering gsi 18 triggering 0 polarity 1 [ 0.818183] Already setup the GSI :18 [ 0.834790] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 16276 usecs [ 0.835003] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.835177] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.835248] Unpacking initramfs... [ 0.835297] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.835660] kvm: no hardware support for 'kvm_intel' [ 0.843517] has_svm: not amd or hygon [ 0.843633] kvm: no hardware support for 'kvm_amd' [ 0.843752] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.844123] clocksource: Switched to clocksource tsc [ 0.846894] Initialise system trusted keyrings [ 0.847207] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.848762] NFS: Registering the id_resolver key type [ 0.848888] Key type id_resolver registered [ 0.848999] Key type id_legacy registered [ 0.849196] 9p: Installing v9fs 9p2000 file system support [ 0.863325] Key type asymmetric registered [ 0.863452] Asymmetric key parser 'x509' registered [ 0.863590] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.863766] io scheduler mq-deadline registered [ 0.863883] io scheduler kyber registered [ 0.864883] xen: registering gsi 16 triggering 0 polarity 1 [ 0.864913] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.865456] xen: registering gsi 16 triggering 0 polarity 1 [ 0.865462] Already setup the GSI :16 [ 0.866095] xen: registering gsi 16 triggering 0 polarity 1 [ 0.866100] Already setup the GSI :16 [ 0.866422] xen: registering gsi 16 triggering 0 polarity 1 [ 0.866426] Already setup the GSI :16 [ 0.866775] xen: registering gsi 16 triggering 0 polarity 1 [ 0.866779] Already setup the GSI :16 [ 0.867383] xen: registering gsi 16 triggering 0 polarity 1 [ 0.867388] Already setup the GSI :16 [ 0.868041] xen: registering gsi 16 triggering 0 polarity 1 [ 0.868046] Already setup the GSI :16 [ 0.868490] xen: registering gsi 17 triggering 0 polarity 1 [ 0.868506] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.868873] xen: registering gsi 19 triggering 0 polarity 1 [ 0.868880] Already setup the GSI :19 [ 0.869450] xen: registering gsi 16 triggering 0 polarity 1 [ 0.869459] Already setup the GSI :16 [ 0.870397] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.870615] ACPI: button: Power Button [PWRB] [ 0.870818] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.871117] ACPI: button: Power Button [PWRF] [ 0.871498] Monitor-Mwait will be used to enter C-1 state [ 0.871588] Monitor-Mwait will be used to enter C-2 state [ 0.871614] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.872118] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.872678] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.873220] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.873619] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.874202] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.874870] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.875595] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.876446] xen:xen_evtchn: Event-channel device installed [ 0.876661] xen_pciback: backend is vpci [ 0.877427] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.877816] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.878703] hpet_acpi_add: no address or irqs in _CRS [ 0.878955] Non-volatile memory driver v1.3 [ 0.879092] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.882137] loop: module loaded [ 0.890033] ahci 0000:00:1f.2: version 3.0 [ 0.890161] xen: registering gsi 16 triggering 0 polarity 1 [ 0.890172] Already setup the GSI :16 [ 0.890567] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.890755] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.906531] scsi host0: ahci [ 0.907054] scsi host1: ahci [ 0.907569] scsi host2: ahci [ 0.908003] scsi host3: ahci [ 0.908385] scsi host4: ahci [ 0.908862] scsi host5: ahci [ 0.909058] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 0.909228] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 0.909399] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 0.909565] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 0.909750] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 0.909918] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 0.910553] tun: Universal TUN/TAP device driver, 1.6 [ 0.910873] e100: Intel(R) PRO/100 Network Driver [ 0.911007] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.911175] sky2: driver version 1.30 [ 0.911435] xen_netfront: Initialising Xen virtual ethernet driver [ 0.911905] xen: registering gsi 18 triggering 0 polarity 1 [ 0.911917] Already setup the GSI :18 [ 0.912188] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.912474] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.912703] ehci-pci 0000:00:1a.0: debug port 2 [ 0.916877] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.923670] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.923964] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.924136] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.924306] usb usb1: Product: EHCI Host Controller [ 0.924445] usb usb1: Manufacturer: Linux 6.1.110+ ehci_hcd [ 0.924580] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.924996] hub 1-0:1.0: USB hub found [ 0.925127] hub 1-0:1.0: 2 ports detected [ 0.925492] xen: registering gsi 18 triggering 0 polarity 1 [ 0.925501] Already setup the GSI :18 [ 0.925730] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.925943] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.926120] ehci-pci 0000:00:1d.0: debug port 2 [ 0.930214] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.936679] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.936933] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.937081] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.937226] usb usb2: Product: EHCI Host Controller [ 0.937341] usb usb2: Manufacturer: Linux 6.1.110+ ehci_hcd [ 0.937457] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.937740] hub 2-0:1.0: USB hub found [ 0.937866] hub 2-0:1.0: 2 ports detected [ 0.938310] xen: registering gsi 19 triggering 0 polarity 1 [ 0.938319] Already setup the GSI :19 [ 0.938528] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.938746] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.939967] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.940436] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.940624] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.940792] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.941030] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.941179] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.941323] usb usb3: Product: xHCI Host Controller [ 0.941438] usb usb3: Manufacturer: Linux 6.1.110+ xhci-hcd [ 0.941555] usb usb3: SerialNumber: 0000:00:14.0 [ 0.941854] hub 3-0:1.0: USB hub found [ 0.941987] hub 3-0:1.0: 8 ports detected [ 0.943133] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.943285] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.943430] usb usb4: Product: xHCI Host Controller [ 0.943545] usb usb4: Manufacturer: Linux 6.1.110+ xhci-hcd [ 0.943707] usb usb4: SerialNumber: 0000:00:14.0 [ 0.943963] hub 4-0:1.0: USB hub found [ 0.944095] hub 4-0:1.0: 6 ports detected [ 0.945207] usbcore: registered new interface driver usblp [ 0.945342] usbcore: registered new interface driver usb-storage [ 0.945559] i8042: PNP: No PS/2 controller found. [ 0.945919] rtc_cmos 00:00: RTC can wake from S4 [ 0.946560] rtc_cmos 00:00: registered as rtc0 [ 0.946732] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.946936] device-mapper: uevent: version 1.0.3 [ 0.947187] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.947238] xen: registering gsi 18 triggering 0 polarity 1 [ 0.947361] intel_pstate: CPU model not supported [ 0.947365] Already setup the GSI :18 [ 0.947387] hid: raw HID events driver (C) Jiri Kosina [ 0.947541] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.947852] usbcore: registered new interface driver usbhid [ 0.947977] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.948078] usbhid: USB HID core driver [ 0.948640] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.951251] Initializing XFRM netlink socket [ 0.951501] NET: Registered PF_INET6 protocol family [ 0.952041] Freeing initrd memory: 20628K [ 0.952242] Segment Routing with IPv6 [ 0.952364] In-situ OAM (IOAM) with IPv6 [ 0.952510] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.952805] NET: Registered PF_PACKET protocol family [ 0.952963] 9pnet: Installing 9P2000 support [ 0.953091] Key type dns_resolver registered [ 0.953875] IPI shorthand broadcast: enabled [ 0.954020] sched_clock: Marking stable (916202621, 37623849)->(1798942876, -845116406) [ 0.954622] registered taskstats version 1 [ 0.954761] Loading compiled-in X.509 certificates [ 0.957552] PM: Magic number: 8:664:371 [ 0.957819] printk: console [netcon0] enabled [ 0.957937] netconsole: network logging started [ 0.958296] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.970745] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.971088] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.971780] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.971960] ALSA device list: [ 0.972081] No soundcards found. [ 1.160738] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.176731] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.184698] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.220292] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.221648] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.221811] ata1: SATA link down (SStatus 0 SControl 300) [ 1.221948] ata6: SATA link down (SStatus 0 SControl 300) [ 1.222105] ata5: SATA link down (SStatus 0 SControl 300) [ 1.222241] ata4: SATA link down (SStatus 0 SControl 300) [ 1.222396] ata2: SATA link down (SStatus 0 SControl 300) [ 1.297304] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.297581] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.297986] hub 1-1:1.0: USB hub found [ 1.298252] hub 1-1:1.0: 4 ports detected [ 1.305336] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.305492] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.305865] hub 2-1:1.0: USB hub found [ 1.306085] hub 2-1:1.0: 4 ports detected [ 1.308477] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.308673] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.312204] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.312481] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.312730] usb 3-3: Product: USB2.0 Hub [ 1.313585] hub 3-3:1.0: USB hub found [ 1.314230] hub 3-3:1.0: 4 ports detected [ 1.336407] ata3.00: configured for UDMA/133 [ 1.336755] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.337755] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.337853] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.338077] sd 2:0:0:0: [sda] Write Protect is off [ 1.338202] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.338265] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.338498] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.357521] sda: sda1 sda2 < sda5 > [ 1.357911] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.359151] Freeing unused kernel image (initmem) memory: 1580K [ 1.359279] Write protecting the kernel read-only data: 22528k [ 1.377575] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.378975] Freeing unused kernel image (rodata/data gap) memory: 1560K [ 1.430656] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.556955] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.557111] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.557790] hub 3-4:1.0: USB hub found [ 1.557996] hub 3-4:1.0: 4 ports detected [ 1.620653] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.698006] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.698168] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.698314] usb 3-3.2: Product: USB2.0 Hub [ 1.699052] hub 3-3.2:1.0: USB hub found [ 1.699469] hub 3-3.2:1.0: 4 ports detected [ 1.846224] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.846355] Run /init as init process [ 1.846472] with arguments: [ 1.846473] /init [ 1.846474] placeholder [ 1.846475] with environment: [ 1.846476] HOME=/ [ 1.846477] TERM=linux [ 1.851692] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.958135] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.958295] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.964169] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 2.294021] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 2.296007] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.296157] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.296523] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.296883] xen: registering gsi 16 triggering 0 polarity 1 [ 2.296893] Already setup the GSI :16 [ 2.297099] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 2.297417] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.300650] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.300775] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.300983] xen: registering gsi 16 triggering 0 polarity 1 [ 2.300992] Already setup the GSI :16 [ 2.327766] pps pps0: new PPS source ptp0 [ 2.327958] igb 0000:07:00.0: added PHC on eth0 [ 2.328093] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.328218] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.328384] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.328500] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.328772] xen: registering gsi 17 triggering 0 polarity 1 [ 2.328781] Already setup the GSI :17 [ 2.358407] pps pps1: new PPS source ptp1 [ 2.358587] igb 0000:08:00.0: added PHC on eth1 [ 2.358735] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.358858] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.359024] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.359139] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.359367] xen: registering gsi 16 triggering 0 polarity 1 [ 2.359374] Already setup the GSI :16 [ 2.417412] igb 0000:0b:00.0: added PHC on eth2 [ 2.417552] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.417692] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.417912] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.418028] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.418274] xen: registering gsi 17 triggering 0 polarity 1 [ 2.418283] Already setup the GSI :17 [ 2.474817] igb 0000:0b:00.1: added PHC on eth3 [ 2.474974] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.475119] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.475348] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.475494] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.475793] xen: registering gsi 18 triggering 0 polarity 1 [ 2.475803] Already setup the GSI :18 [ 2.531648] igb 0000:0b:00.2: added PHC on eth4 [ 2.531822] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.531963] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.532188] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.532325] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.532651] xen: registering gsi 19 triggering 0 polarity 1 [ 2.532662] Already setup the GSI :19 [ 2.590460] igb 0000:0b:00.3: added PHC on eth5 [ 2.590601] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.590739] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.590944] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.591098] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.594101] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.606188] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.614123] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.622895] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.638062] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.645119] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 3.033737] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.163606] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.163828] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.452391] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.452737] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.452957] xen: registering gsi 17 triggering 0 polarity 1 [ 3.452967] Already setup the GSI :17 [ 4.193329] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.323307] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.323539] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.612391] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.614915] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 4.623129] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 5.040063] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.047337] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.551945] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.736167] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.769443] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.847813] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.434240] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.434444] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.434620] device enx0cc47a9f87be entered promiscuous mode [ 14.942224] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 15.046941] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 15.047246] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 15.047370] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 15.047673] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready