[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.110+ (osstest@himrod0) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Fri Sep 13 07:36:29 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Xen 4.20 support found [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 16 pages/cpu s35412 r8192 d21932 u65536 [ 0.000000] pcpu-alloc: s35412 r8192 d21932 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--lakeside--vg-root rootdelay=3 ro root=/dev/mapper/arndale--lakeside--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 416844K/524288K available (14336K kernel code, 2180K rwdata, 5600K rodata, 2048K init, 438K bss, 41908K reserved, 65536K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000012] Switching to timer-based delay loop, resolution 41ns [ 0.000502] Console: colour dummy device 80x30 [ 0.292974] printk: console [hvc0] enabled [ 0.297166] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.307566] CPU: Testing write buffer coherency: ok [ 0.312509] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.322062] CPU0: Spectre BHB: enabling loop workaround for all CPUs [ 0.328475] pid_max: default: 32768 minimum: 301 [ 0.333269] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.340543] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.348973] /cpus/cpu@0 missing clock-frequency property [ 0.353771] /cpus/cpu@1 missing clock-frequency property [ 0.359152] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.365656] xen:grant_table: Grant tables using version 1 layout [ 0.370990] Grant table initialized [ 0.374532] xen:events: Using FIFO-based ABI [ 0.378847] Xen: initializing cpu0 [ 0.382374] Setting up static identity map for 0x60300000 - 0x603000ac [ 0.390142] rcu: Hierarchical SRCU implementation. [ 0.393763] rcu: Max phase no-delay instances is 1000. [ 0.401825] EFI services will not be available. [ 0.405130] smp: Bringing up secondary CPUs ... [ 0.480250] Xen: initializing cpu1 [ 0.480407] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.480436] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.499291] smp: Brought up 1 node, 2 CPUs [ 0.503065] SMP: Total of 2 processors activated (96.00 BogoMIPS). [ 0.509369] CPU: All CPU(s) started in SVC mode. [ 0.514776] devtmpfs: initialized [ 0.527212] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.533702] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.543426] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.551439] pinctrl core: initialized pinctrl subsystem [ 0.557970] DMI not present or invalid. [ 0.561045] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.568249] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.576976] thermal_sys: Registered thermal governor 'step_wise' [ 0.577105] software IO TLB: area num 2. [ 0.585787] software IO TLB: only able to allocate 8 MB [ 0.592917] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) [ 0.598103] No ATAGs? [ 0.600429] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 0.608977] Serial: AMBA PL011 UART driver [ 0.641095] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 62 [ 0.690540] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 [ 0.715157] xen:balloon: Initialising balloon driver [ 0.722722] iommu: Default domain type: Translated [ 0.726219] iommu: DMA domain TLB invalidation policy: strict mode [ 0.733216] SCSI subsystem initialized [ 0.736586] libata version 3.00 loaded. [ 0.736789] usbcore: registered new interface driver usbfs [ 0.741965] usbcore: registered new interface driver hub [ 0.747380] usbcore: registered new device driver usb [ 0.753981] s3c-i2c 12c60000.i2c: slave address 0x66 [ 0.757605] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz [ 0.763914] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 [ 0.772349] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 [ 0.781478] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter [ 0.787005] s3c-i2c 12c90000.i2c: slave address 0x00 [ 0.791688] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz [ 0.797950] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter [ 0.803182] s3c-i2c 12ce0000.i2c: slave address 0x00 [ 0.807938] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz [ 0.814040] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter [ 0.819246] s3c-i2c 121d0000.i2c: slave address 0x00 [ 0.824151] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz [ 0.830188] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter [ 0.835975] pps_core: LinuxPPS API ver. 1 registered [ 0.840397] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.849603] PTP clock support registered [ 0.862963] EDAC MC: Ver: 3.0.0 [ 0.867073] vgaarb: loaded [ 0.872231] clocksource: Switched to clocksource arch_sys_counter [ 0.883812] NET: Registered PF_INET protocol family [ 0.887459] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.895372] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.903070] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.910840] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.918694] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.925974] TCP: Hash tables configured (established 4096 bind 4096) [ 0.932337] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.938886] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.946025] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.952074] RPC: Registered named UNIX socket transport module. [ 0.957641] RPC: Registered udp transport module. [ 0.962410] RPC: Registered tcp transport module. [ 0.967166] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.973701] PCI: CLS 0 bytes, default 64 [ 0.978232] Trying to unpack rootfs image as initramfs... [ 0.979505] Initialise system trusted keyrings [ 0.987868] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 1.000069] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.005089] NFS: Registering the id_resolver key type [ 1.009690] Key type id_resolver registered [ 1.013949] Key type id_legacy registered [ 1.018083] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.024815] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.062868] Key type asymmetric registered [ 1.065602] Asymmetric key parser 'x509' registered [ 1.070674] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.078035] io scheduler mq-deadline registered [ 1.082633] io scheduler kyber registered [ 1.108602] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc [ 1.202506] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.208708] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 1.234098] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.240304] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 1.273191] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.279391] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 1.303653] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.309857] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 1.346970] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected [ 1.417148] xen:xen_evtchn: Event-channel device installed [ 1.528875] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 1.551615] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 113, base_baud = 0) is a S3C6400/10 [ 1.565181] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 114, base_baud = 0) is a S3C6400/10 [ 1.573402] Freeing initrd memory: 11780K [ 1.585545] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 115, base_baud = 0) is a S3C6400/10 [ 1.602773] SuperH (H)SCI(F) driver initialized [ 1.606958] STMicroelectronics ASC driver initialized [ 1.612418] STM32 USART driver initialized [ 1.618815] exynos-trng 10830600.rng: Exynos True Random Number Generator. [ 1.636311] brd: module loaded [ 1.642159] loop: module loaded [ 1.676391] Invalid max_queues (4), will use default max: 2. [ 1.702623] tun: Universal TUN/TAP device driver, 1.6 [ 1.706505] CAN device driver interface [ 1.711597] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.722616] xen_netfront: Initialising Xen virtual ethernet driver [ 1.727513] pegasus: Pegasus/Pegasus II USB Ethernet driver [ 1.733148] usbcore: registered new interface driver pegasus [ 1.738844] usbcore: registered new interface driver asix [ 1.744341] usbcore: registered new interface driver ax88179_178a [ 1.750462] usbcore: registered new interface driver cdc_ether [ 1.756417] usbcore: registered new interface driver smsc75xx [ 1.762236] usbcore: registered new interface driver smsc95xx [ 1.768002] usbcore: registered new interface driver net1080 [ 1.773752] usbcore: registered new interface driver cdc_subset [ 1.779716] usbcore: registered new interface driver zaurus [ 1.785392] usbcore: registered new interface driver cdc_ncm [ 1.794900] usbcore: registered new interface driver usb-storage [ 1.829434] s5m-rtc s5m-rtc: registered as rtc0 [ 1.838274] s5m-rtc s5m-rtc: setting system clock to 2024-09-13T12:11:11 UTC (1726229471) [ 1.846813] i2c_dev: i2c /dev entries driver [ 1.857094] syscon-poweroff 10040000.system-controller:syscon-poweroff: pm_power_off already claimed for psci_sys_poweroff [ 1.866792] syscon-poweroff: probe of 10040000.system-controller:syscon-poweroff failed with error -16 [ 1.878024] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found [ 1.888840] device-mapper: uevent: version 1.0.3 [ 1.892345] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 1.901229] cpu cpu0: OPP table can't be empty [ 1.906347] failed to register cpuidle driver [ 1.909531] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver [ 1.917842] sdhci: Secure Digital Host Controller Interface driver [ 1.922908] sdhci: Copyright(c) Pierre Ossman [ 1.930881] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.938558] ledtrig-cpu: registered to indicate activity on CPUs [ 1.943906] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 1.950461] usbcore: registered new interface driver usbhid [ 1.955357] usbhid: USB HID core driver [ 1.966140] NET: Registered PF_INET6 protocol family [ 1.970781] Segment Routing with IPv6 [ 1.973558] In-situ OAM (IOAM) with IPv6 [ 1.977534] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.983949] NET: Registered PF_PACKET protocol family [ 1.988584] can: controller area network core [ 1.993086] NET: Registered PF_CAN protocol family [ 1.997851] can: raw protocol [ 2.000891] can: broadcast manager protocol [ 2.005183] can: netlink gateway - max_hops=1 [ 2.009795] Key type dns_resolver registered [ 2.014535] ThumbEE CPU extension supported. [ 2.018253] Registering SWP/SWPB emulation handler [ 2.023623] Loading compiled-in X.509 certificates [ 2.052013] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 2.058106] clk: Not disabling unused clocks [ 2.065150] Freeing unused kernel image (initmem) memory: 2048K [ 2.071290] Run /init as init process [ 2.073623] with arguments: [ 2.073629] /init [ 2.073634] with environment: [ 2.073638] HOME=/ [ 2.073643] TERM=linux [ 3.515824] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator [ 3.546455] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator [ 3.560456] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator [ 3.574934] Synopsys Designware Multimedia Card Interface Driver [ 3.575403] phy phy-12130000.phy.8: phy_power_on was called before phy_init [ 3.586640] exynos-ohci 12120000.usb: USB Host Controller [ 3.592122] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1 [ 3.621748] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator [ 3.628059] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator [ 3.635373] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator [ 3.654288] s2mps11-clk s5m8767-clk: DMA mask not set [ 3.655695] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. [ 3.659499] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. [ 3.672031] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 [ 3.705756] dwmmc_exynos 12220000.mmc: Using internal DMA controller. [ 3.710846] dwmmc_exynos 12220000.mmc: Version ID is 241a [ 3.716418] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 127,32 bit host data width,128 deep fifo [ 3.726023] dwmmc_exynos 12200000.mmc: Using internal DMA controller. [ 3.732415] dwmmc_exynos 12200000.mmc: Version ID is 241a [ 3.737933] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo [ 3.751914] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled [ 3.757656] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 3.766558] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 3.778511] hub 1-0:1.0: USB hub found [ 3.780941] hub 1-0:1.0: 3 ports detected [ 3.785320] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 3.795385] phy phy-12130000.phy.8: phy_power_on was called before phy_init [ 3.801746] exynos-ehci 12110000.usb: EHCI Host Controller [ 3.807868] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 2 [ 3.832563] mmc_host mmc1: card is polling. [ 3.848112] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 3.857143] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 [ 3.862506] scsi host0: ahci-dwc [ 3.865931] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 128 [ 3.892287] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 [ 3.902545] hub 2-0:1.0: USB hub found [ 3.904974] hub 2-0:1.0: 3 ports detected [ 3.932438] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling [ 3.937117] rtc rtc1: invalid alarm value: 1900-01-30T00:00:00 [ 3.943386] s3c-rtc 101e0000.rtc: registered as rtc1 [ 3.952025] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 3.960710] mmc0: new high speed SDHC card at address aaaa [ 3.966630] mmcblk0: mmc0:aaaa SU04G 3.69 GiB [ 3.970777] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 3.992522] mmc1: new DDR MMC card at address 0001 [ 4.002621] mmcblk1: mmc1:0001 M4G1FB 3.64 GiB [ 4.008141] mmcblk1: p1 p2 p3 p4 [ 4.012776] mmcblk1boot0: mmc1:0001 M4G1FB 1.00 MiB [ 4.023269] mmcblk1boot1: mmc1:0001 M4G1FB 1.00 MiB [ 4.033154] mmcblk1rpmb: mmc1:0001 M4G1FB 128 KiB, chardev (238:0) [ 4.372249] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.378553] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 [ 4.384017] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) [ 4.391681] ata1.00: configured for UDMA/133 [ 4.395704] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 [ 4.404729] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 4.410842] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 4.416214] sd 0:0:0:0: [sda] Write Protect is off [ 4.420997] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.421082] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.430265] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 4.474216] sda: sda1 sda2 < sda5 > [ 4.477130] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.490095] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) [ 4.685784] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host [ 4.692802] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 4.697177] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 [ 4.711692] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 [ 4.720288] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 [ 4.726038] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 4.731366] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 [ 4.739127] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed [ 4.746979] hub 3-0:1.0: USB hub found [ 4.749619] hub 3-0:1.0: 1 port detected [ 4.754367] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.762710] hub 4-0:1.0: USB hub found [ 4.765506] hub 4-0:1.0: 1 port detected [ 7.232222] random: crng init done [ 11.188512] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 11.489224] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: disabled. [ 15.112272] usb3503 usb-hub: switched to HUB mode [ 15.115622] usb3503 usb-hub: usb3503_probe: probed in hub mode [ 15.181575] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled [ 15.202420] s5p-secss 10830000.sss: s5p-sss driver registered [ 15.253827] mc: Linux media interface: v0.10 [ 15.316605] videodev: Linux video capture interface: v2.00 [ 15.462337] usb 2-3: new high-speed USB device number 2 using exynos-ehci [ 15.544768] s5p-mfc 11000000.codec: Adding to iommu group 0 [ 15.559565] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers [ 15.639745] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 [ 15.651516] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 [ 15.659189] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel [ 15.670051] s5p-mfc 11000000.codec: decoder registered as /dev/video0 [ 15.676438] s5p-mfc 11000000.codec: encoder registered as /dev/video1 [ 15.726831] hub 2-3:1.0: USB hub found [ 15.736791] hub 2-3:1.0: 3 ports detected [ 15.791692] exynos-gsc 13e00000.gsc: Adding to iommu group 1 [ 15.818341] exynos-gsc 13e10000.gsc: Adding to iommu group 2 [ 15.828404] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s [ 15.830779] exynos-gsc 13e20000.gsc: Adding to iommu group 3 [ 15.848160] exynos-gsc 13e30000.gsc: Adding to iommu group 4 [ 15.854478] wm8994 3-001a: Device is not a WM8994, ID is 0 [ 15.860275] wm8994: probe of 3-001a failed with error -22 [ 16.062290] usb 2-3.2: new high-speed USB device number 3 using exynos-ehci [ 16.247977] hub 2-3.2:1.0: USB hub found [ 16.251391] hub 2-3.2:1.0: 4 ports detected [ 16.524888] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 [ 16.532694] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 [ 16.541314] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel [ 16.553017] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 [ 16.560861] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 [ 16.569598] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel [ 16.622243] usb 2-3.2.4: new high-speed USB device number 4 using exynos-ehci [ 16.785318] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random [ 17.444068] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:004:10] driver [Asix Electronics AX88772A] (irq=POLL) [ 17.458315] Asix Electronics AX88772A usb-002:004:10: attached PHY driver (mii_bus:phy_addr=usb-002:004:10, irq=POLL) [ 17.468163] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, f6:52:9b:72:78:7c [ 17.517671] usbcore: registered new device driver onboard-usb-hub [ 17.524838] usb 2-3.2.4: USB disconnect, device number 4 [ 17.529099] asix 2-3.2.4:1.0 eth0: unregister 'asix' usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet [ 17.703004] hub 2-3.2:1.0: USB hub found [ 17.705986] hub 2-3.2:1.0: 4 ports detected [ 17.719575] hub 2-3.2:1.0: USB hub found [ 17.723265] hub 2-3.2:1.0: 4 ports detected [ 18.052282] usb 2-3.2.4: new high-speed USB device number 5 using exynos-ehci [ 18.854068] asix 2-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-002:005:10] driver [Asix Electronics AX88772A] (irq=POLL) [ 18.868315] Asix Electronics AX88772A usb-002:005:10: attached PHY driver (mii_bus:phy_addr=usb-002:005:10, irq=POLL) [ 18.878149] asix 2-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, f6:52:9b:72:78:7c [ 19.372063] EXT4-fs (dm-0): re-mounted. Quota mode: disabled. [ 21.081831] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 21.133575] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: disabled. [ 21.230127] Adding 1949692k swap on /dev/mapper/arndale--lakeside--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 23.022090] xenbr0: port 1(eth0) entered blocking state [ 23.025986] xenbr0: port 1(eth0) entered disabled state [ 23.031385] device eth0 entered promiscuous mode [ 23.041188] asix 2-3.2.4:1.0 eth0: configuring for phy/internal link mode [ 25.239571] asix 2-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off [ 25.242321] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 25.251912] xenbr0: port 1(eth0) entered blocking state [ 25.257161] xenbr0: port 1(eth0) entered forwarding state [ 25.262745] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready