[ 0.000000] microcode: microcode updated early to revision 0x42e, date = 2019-03-14 [ 0.000000] Linux version 6.1.0-25-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.106-3 (2024-08-26) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007de2bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1799.988 MHz processor [ 0.000931] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000936] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000946] last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.001087] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001736] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved [ 0.001746] last_pfn = 0x7de2c max_arch_pfn = 0x400000000 [ 0.018553] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] [ 0.018579] Using GB pages for direct mapping [ 0.018772] RAMDISK: [mem 0x3310b000-0x3587cfff] [ 0.018780] ACPI: Early table checksum verification disabled [ 0.018785] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.018791] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.018800] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.018808] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.018813] ACPI: FACS 0x000000007E1D8080 000040 [ 0.018818] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.018823] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.018828] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.018833] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.018838] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.018843] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.018849] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.018854] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.018859] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.018865] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.018870] ACPI: DMAR 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.018875] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.018879] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.018881] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.018883] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.018884] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.018885] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.018887] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.018888] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.018890] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.018891] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.018892] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.018894] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.018895] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.018896] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.018898] ACPI: Reserving DMAR table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.018899] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.018969] No NUMA configuration found [ 0.018970] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] [ 0.018986] NODE_DATA(0) allocated [mem 0x27ffd5000-0x27fffffff] [ 0.019447] Zone ranges: [ 0.019448] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.019451] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.019453] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.019455] Device empty [ 0.019457] Movable zone start for each node [ 0.019461] Early memory node ranges [ 0.019462] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.019464] node 0: [mem 0x0000000000100000-0x000000007de2bfff] [ 0.019466] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.019470] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.019478] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.019536] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.027760] On node 0, zone Normal: 8660 pages in unavailable ranges [ 0.028055] ACPI: PM-Timer IO Port: 0x408 [ 0.028067] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.028069] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.028071] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.028072] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.028085] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.028091] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.028095] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028098] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.028105] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028107] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.028113] TSC deadline timer available [ 0.028115] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.028135] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028138] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.028140] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.028141] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.028142] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.028145] PM: hibernation: Registered nosave memory: [mem 0x7de2c000-0x7debafff] [ 0.028146] PM: hibernation: Registered nosave memory: [mem 0x7debb000-0x7dfc3fff] [ 0.028147] PM: hibernation: Registered nosave memory: [mem 0x7dfc4000-0x7e1e0fff] [ 0.028149] PM: hibernation: Registered nosave memory: [mem 0x7e1e1000-0x7f36afff] [ 0.028150] PM: hibernation: Registered nosave memory: [mem 0x7f36b000-0x7f7fffff] [ 0.028151] PM: hibernation: Registered nosave memory: [mem 0x7f800000-0x7fffffff] [ 0.028152] PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff] [ 0.028153] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.028155] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff] [ 0.028156] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff] [ 0.028157] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.028159] [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.028161] Booting paravirtualized kernel on bare hardware [ 0.028164] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.035461] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.035857] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.035866] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.035870] pcpu-alloc: [0] 0 1 2 3 [ 0.035910] Fallback order for Node 0: 0 [ 0.035915] Built 1 zonelists, mobility grouping on. Total pages: 2055603 [ 0.035917] Policy zone: Normal [ 0.035919] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.035988] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64", will be passed to user space. [ 0.036001] random: crng init done [ 0.037053] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.037622] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.037710] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.037722] software IO TLB: area num 4. [ 0.079396] Memory: 2086372K/8353556K available (14342K kernel code, 2335K rwdata, 9072K rodata, 2796K init, 17396K bss, 305204K reserved, 0K cma-reserved) [ 0.079608] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.079629] Kernel/User page tables isolation: enabled [ 0.079683] ftrace: allocating 40246 entries in 158 pages [ 0.090048] ftrace: allocated 158 pages with 5 groups [ 0.090997] Dynamic Preempt: voluntary [ 0.091041] rcu: Preemptible hierarchical RCU implementation. [ 0.091043] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.091045] Trampoline variant of Tasks RCU enabled. [ 0.091046] Rude variant of Tasks RCU enabled. [ 0.091046] Tracing variant of Tasks RCU enabled. [ 0.091047] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.091049] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.098476] NR_IRQS: 524544, nr_irqs: 864, preallocated irqs: 16 [ 0.098684] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.103209] Console: colour VGA+ 80x25 [ 1.027680] printk: console [ttyS0] enabled [ 1.031887] ACPI: Core revision 20220331 [ 1.036537] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 1.045675] APIC: Switch to symmetric I/O mode setup [ 1.050656] DMAR: Host address width 46 [ 1.054504] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 1.059830] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de [ 1.067754] DMAR: RMRR base: 0x0000007de91000 end: 0x0000007de9dfff [ 1.074028] DMAR: ATSR flags: 0x0 [ 1.077339] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 1.083606] DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0 [ 1.089965] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0 [ 1.096319] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 1.101718] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 1.110851] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 1.116245] x2apic enabled [ 1.118974] Switched APIC routing to cluster x2apic. [ 1.124479] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.149676] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f21e26ba5, max_idle_ns: 440795219359 ns [ 1.160191] Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.97 BogoMIPS (lpj=7199952) [ 1.164222] CPU0: Thermal monitoring enabled (TM1) [ 1.168274] process: using mwait in idle threads [ 1.172192] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 1.176189] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 1.180192] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.184190] Spectre V2 : Mitigation: Retpolines [ 1.188189] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.192189] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.196189] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 1.200190] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.204190] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 1.208190] MDS: Mitigation: Clear CPU buffers [ 1.212189] MMIO Stale Data: Unknown: No mitigations [ 1.216195] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.220189] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.224189] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.228189] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.232189] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.260754] Freeing SMP alternatives memory: 36K [ 1.264190] pid_max: default: 32768 minimum: 301 [ 1.268223] LSM: Security Framework initializing [ 1.272207] landlock: Up and running. [ 1.276189] Yama: disabled by default; enable with sysctl kernel.yama.* [ 1.280221] AppArmor: AppArmor initialized [ 1.284191] TOMOYO Linux initialized [ 1.288195] LSM support for eBPF active [ 1.292235] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.296205] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.304737] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2403 v2 @ 1.80GHz (family: 0x6, model: 0x3e, stepping: 0x4) [ 1.308377] cblist_init_generic: Setting adjustable number of callback queues. [ 1.312190] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.316220] cblist_init_generic: Setting adjustable number of callback queues. [ 1.320190] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.324212] cblist_init_generic: Setting adjustable number of callback queues. [ 1.328189] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.332210] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 1.336191] ... version: 3 [ 1.340189] ... bit width: 48 [ 1.344189] ... generic registers: 8 [ 1.348189] ... value mask: 0000ffffffffffff [ 1.352189] ... max period: 00007fffffffffff [ 1.356189] ... fixed-purpose events: 3 [ 1.360189] ... event mask: 00000007000000ff [ 1.364421] signal: max sigframe size: 1776 [ 1.368213] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 1.372222] rcu: Hierarchical SRCU implementation. [ 1.376190] rcu: Max phase no-delay instances is 1000. [ 1.380865] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.384283] smp: Bringing up secondary CPUs ... [ 1.388339] x86: Booting SMP configuration: [ 1.392194] .... node #0, CPUs: #1 #2 #3 [ 1.407535] smp: Brought up 1 node, 4 CPUs [ 1.412190] smpboot: Max logical packages: 1 [ 1.416190] smpboot: Total of 4 processors activated (14399.90 BogoMIPS) [ 1.437786] node 0 deferred pages initialised in 20ms [ 1.444651] devtmpfs: initialized [ 1.448271] x86/mm: Memory block size: 128MB [ 1.453230] ACPI: PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 1.456241] ACPI: PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 1.460345] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.464202] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.468250] pinctrl core: initialized pinctrl subsystem [ 1.473097] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.476467] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 1.480341] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.484341] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.488199] audit: initializing netlink subsys (disabled) [ 1.492204] audit: type=2000 audit(1726265843.404:1): state=initialized audit_enabled=0 res=1 [ 1.492340] thermal_sys: Registered thermal governor 'fair_share' [ 1.496193] thermal_sys: Registered thermal governor 'bang_bang' [ 1.500190] thermal_sys: Registered thermal governor 'step_wise' [ 1.504189] thermal_sys: Registered thermal governor 'user_space' [ 1.508189] thermal_sys: Registered thermal governor 'power_allocator' [ 1.512206] cpuidle: using governor ladder [ 1.520194] cpuidle: using governor menu [ 1.524165] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 1.524191] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.528292] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 1.532192] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 1.536198] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 1.540610] PCI: Using configuration type 1 for base access [ 1.544289] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 1.549505] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.552247] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 1.556192] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 1.564192] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 1.572190] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 1.576342] ACPI: Added _OSI(Module Device) [ 1.580192] ACPI: Added _OSI(Processor Device) [ 1.584190] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.592190] ACPI: Added _OSI(Processor Aggregator Device) [ 1.712362] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.741845] ACPI: Interpreter enabled [ 1.744212] ACPI: PM: (supports S0 S1 S4 S5) [ 1.748190] ACPI: Using IOAPIC for interrupt routing [ 1.756297] HEST: Table parsing has been initialized. [ 1.760315] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 1.764193] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.776189] PCI: Using E820 reservations for host bridge windows [ 1.780747] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.788297] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PRAD], AE_NOT_FOUND (20220331/psargs-330) [ 1.792193] ACPI Error: Aborting method \_GPE._L24 due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 1.796198] ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_L24] (20220331/evgpe-511) [ 1.800188] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.804188] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.812280] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR] [ 1.820340] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability] [ 1.828190] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.836545] PCI host bridge to bus 0000:00 [ 1.840192] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.848190] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.856190] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.860189] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.868190] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 1.876190] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.884190] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.892190] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.900190] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.904220] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.908273] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.916314] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.924289] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.928358] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.936288] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.940357] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.948228] pci 0000:00:03.0: enabling Extended Tags [ 1.952254] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.956344] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.964207] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.972334] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.976206] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.984325] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 1.992206] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 1.996323] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 2.004206] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 2.008326] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 2.016206] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 2.024324] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 2.028205] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 2.036327] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 2.040208] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 2.048325] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 2.056206] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 2.060323] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 2.068319] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 2.072315] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 2.080201] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 2.088340] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 2.092310] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 2.100331] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 2.104207] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 2.112257] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 2.116278] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 2.124207] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 2.132257] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 2.136292] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 2.144206] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 2.148280] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.156295] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 2.160289] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.168219] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 2.172191] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 2.180293] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 2.184289] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.192213] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 2.196191] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 2.204316] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 2.208206] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 2.216280] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.220293] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.228335] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 2.232404] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 2.240202] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 2.244196] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 2.252196] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 2.256196] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 2.264196] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 2.268197] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 2.272233] pci 0000:00:1f.2: PME# supported from D3hot [ 2.280280] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 2.284207] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 2.292213] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 2.296265] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 2.304210] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 2.312352] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.316241] pci 0000:00:01.1: PCI bridge to [bus 02] [ 2.320240] pci 0000:00:03.0: PCI bridge to [bus 03] [ 2.324273] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 2.332212] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 2.340204] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 2.348199] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 2.352215] pci 0000:04:00.0: enabling Extended Tags [ 2.356296] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 2.364190] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 2.376444] pci 0000:00:11.0: PCI bridge to [bus 04] [ 2.380193] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 2.384197] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 2.392287] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 2.400224] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 2.404226] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 2.412208] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 2.416378] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 2.424412] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 2.428193] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 2.436192] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 2.444291] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 2.448224] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 2.456226] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 2.460208] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 2.468375] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 2.472404] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 2.476193] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 2.484192] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 2.492212] pci_bus 0000:07: extended config space not accessible [ 2.496215] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 2.504205] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 2.508198] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 2.516198] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 2.524236] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.532300] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 2.536194] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 2.544196] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 2.552190] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 2.560190] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 2.568189] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 2.576190] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 2.588190] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 2.596189] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 2.604189] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 2.612189] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 2.624978] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 2.628194] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.640208] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 2.648190] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 2.656256] PCI host bridge to bus 0000:ff [ 2.660191] pci_bus 0000:ff: root bus resource [bus ff] [ 2.664203] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 2.672270] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 2.676258] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 2.684250] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 2.688253] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 2.696251] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 2.700255] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 2.708247] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 2.716248] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 2.720249] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 2.728250] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 2.732247] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 2.740250] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 2.744252] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 2.752266] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 2.756278] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 2.764272] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 2.768273] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 2.776271] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 2.780271] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 2.788274] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 2.792272] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 2.800284] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 2.804273] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 2.812272] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 2.816273] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 2.824273] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 2.828272] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 2.836270] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 2.840249] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 2.848254] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 2.852250] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 2.860252] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 2.864248] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 2.872247] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 2.880408] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 2.884242] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 2.892240] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 2.896239] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 2.904239] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 2.908239] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 2.916251] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 2.920240] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 2.929808] iommu: Default domain type: Translated [ 2.932190] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.940290] pps_core: LinuxPPS API ver. 1 registered [ 2.944190] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.952192] PTP clock support registered [ 2.956130] EDAC MC: Ver: 3.0.0 [ 2.960448] NetLabel: Initializing [ 2.963856] NetLabel: domain hash size = 128 [ 2.968192] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 2.976212] NetLabel: unlabeled traffic allowed by default [ 2.980190] PCI: Using ACPI for IRQ routing [ 2.991144] PCI: pci_cache_line_size set to 64 bytes [ 2.991269] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] [ 2.991272] e820: reserve RAM buffer [mem 0x7de2c000-0x7fffffff] [ 2.992228] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 2.996188] pci 0000:07:01.0: vgaarb: bridge control possible [ 2.996188] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.012197] vgaarb: loaded [ 3.016897] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 3.024190] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 3.032189] clocksource: Switched to clocksource tsc-early [ 3.037880] VFS: Disk quotas dquot_6.6.0 [ 3.041825] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.048891] AppArmor: AppArmor Filesystem Enabled [ 3.053629] pnp: PnP ACPI init [ 3.056837] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 3.063456] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 3.070066] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 3.076680] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 3.083419] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 3.090523] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 3.096443] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 3.103722] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 3.109838] pnp 00:07: [dma 0 disabled] [ 3.110076] pnp 00:08: [dma 0 disabled] [ 3.110353] system 00:09: [io 0x0400-0x0453] has been reserved [ 3.116280] system 00:09: [io 0x0458-0x047f] has been reserved [ 3.122196] system 00:09: [io 0x1180-0x119f] has been reserved [ 3.128117] system 00:09: [io 0x0500-0x057f] has been reserved [ 3.134037] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 3.140649] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 3.147608] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 3.154325] system 00:0a: [io 0x0454-0x0457] has been reserved [ 3.160526] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 3.167769] pnp: PnP ACPI: found 12 devices [ 3.178476] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.187435] NET: Registered PF_INET protocol family [ 3.192495] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 3.202826] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 3.211399] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.219232] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 3.227531] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 3.235327] TCP: Hash tables configured (established 65536 bind 65536) [ 3.241949] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 3.249505] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.256332] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.263626] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.269299] NET: Registered PF_XDP protocol family [ 3.274111] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.279091] pci 0000:00:01.1: PCI bridge to [bus 02] [ 3.284064] pci 0000:00:03.0: PCI bridge to [bus 03] [ 3.289041] pci 0000:00:11.0: PCI bridge to [bus 04] [ 3.294007] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 3.300106] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.307857] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 3.312821] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 3.318916] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 3.325706] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 3.330674] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 3.336769] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 3.343560] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 3.348530] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 3.355316] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.363058] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 3.369241] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 3.375418] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 3.381598] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 3.387778] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.394651] pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.401524] pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.408483] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.415444] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 3.421014] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.428235] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 3.433809] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 3.440073] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 3.445645] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 3.451913] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 3.458178] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.465397] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 3.471576] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 3.477756] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 3.483936] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 3.490113] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.496986] pci_bus 0000:07: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.503859] pci_bus 0000:07: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.510820] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.517871] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 3.549587] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 24069 usecs [ 3.581573] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 23994 usecs [ 3.589075] PCI: CLS 64 bytes, default 64 [ 3.593129] DMAR: No SATC found [ 3.593169] Trying to unpack rootfs image as initramfs... [ 3.596274] DMAR: dmar0: Using Queued invalidation [ 3.596352] pci 0000:00:00.0: Adding to iommu group 0 [ 3.611586] pci 0000:00:01.0: Adding to iommu group 1 [ 3.616668] pci 0000:00:01.1: Adding to iommu group 2 [ 3.621751] pci 0000:00:03.0: Adding to iommu group 3 [ 3.626834] pci 0000:00:04.0: Adding to iommu group 4 [ 3.631908] pci 0000:00:04.1: Adding to iommu group 5 [ 3.636993] pci 0000:00:04.2: Adding to iommu group 6 [ 3.642071] pci 0000:00:04.3: Adding to iommu group 7 [ 3.647147] pci 0000:00:04.4: Adding to iommu group 8 [ 3.652226] pci 0000:00:04.5: Adding to iommu group 9 [ 3.657308] pci 0000:00:04.6: Adding to iommu group 10 [ 3.662477] pci 0000:00:04.7: Adding to iommu group 11 [ 3.667644] pci 0000:00:05.0: Adding to iommu group 12 [ 3.672809] pci 0000:00:05.2: Adding to iommu group 13 [ 3.677978] pci 0000:00:05.4: Adding to iommu group 14 [ 3.683148] pci 0000:00:11.0: Adding to iommu group 15 [ 3.688338] pci 0000:00:16.0: Adding to iommu group 16 [ 3.693508] pci 0000:00:16.1: Adding to iommu group 16 [ 3.698681] pci 0000:00:1a.0: Adding to iommu group 17 [ 3.703850] pci 0000:00:1c.0: Adding to iommu group 18 [ 3.709025] pci 0000:00:1c.1: Adding to iommu group 19 [ 3.714194] pci 0000:00:1d.0: Adding to iommu group 20 [ 3.719361] pci 0000:00:1e.0: Adding to iommu group 21 [ 3.724577] pci 0000:00:1f.0: Adding to iommu group 22 [ 3.729742] pci 0000:00:1f.2: Adding to iommu group 22 [ 3.734905] pci 0000:00:1f.3: Adding to iommu group 22 [ 3.740072] pci 0000:00:1f.6: Adding to iommu group 22 [ 3.745248] pci 0000:04:00.0: Adding to iommu group 23 [ 3.750414] pci 0000:05:00.0: Adding to iommu group 24 [ 3.755576] pci 0000:06:00.0: Adding to iommu group 25 [ 3.760724] pci 0000:07:01.0: Adding to iommu group 21 [ 3.765911] pci 0000:ff:08.0: Adding to iommu group 26 [ 3.771093] pci 0000:ff:09.0: Adding to iommu group 27 [ 3.776305] pci 0000:ff:0a.0: Adding to iommu group 28 [ 3.781481] pci 0000:ff:0a.1: Adding to iommu group 28 [ 3.786648] pci 0000:ff:0a.2: Adding to iommu group 28 [ 3.791820] pci 0000:ff:0a.3: Adding to iommu group 28 [ 3.797011] pci 0000:ff:0b.0: Adding to iommu group 29 [ 3.802182] pci 0000:ff:0b.3: Adding to iommu group 29 [ 3.807373] pci 0000:ff:0c.0: Adding to iommu group 30 [ 3.812546] pci 0000:ff:0c.1: Adding to iommu group 30 [ 3.817750] pci 0000:ff:0d.0: Adding to iommu group 31 [ 3.822919] pci 0000:ff:0d.1: Adding to iommu group 31 [ 3.828111] pci 0000:ff:0e.0: Adding to iommu group 32 [ 3.833292] pci 0000:ff:0e.1: Adding to iommu group 32 [ 3.838457] pci 0000:ff:0f.0: Adding to iommu group 33 [ 3.843623] pci 0000:ff:0f.1: Adding to iommu group 34 [ 3.848787] pci 0000:ff:0f.2: Adding to iommu group 35 [ 3.853953] pci 0000:ff:0f.3: Adding to iommu group 36 [ 3.859119] pci 0000:ff:0f.4: Adding to iommu group 37 [ 3.864282] pci 0000:ff:0f.5: Adding to iommu group 38 [ 3.869452] pci 0000:ff:10.0: Adding to iommu group 39 [ 3.874622] pci 0000:ff:10.1: Adding to iommu group 40 [ 3.879788] pci 0000:ff:10.2: Adding to iommu group 41 [ 3.884953] pci 0000:ff:10.3: Adding to iommu group 42 [ 3.890120] pci 0000:ff:10.4: Adding to iommu group 43 [ 3.895289] pci 0000:ff:10.5: Adding to iommu group 44 [ 3.900457] pci 0000:ff:10.6: Adding to iommu group 45 [ 3.905635] pci 0000:ff:10.7: Adding to iommu group 46 [ 3.910852] pci 0000:ff:13.0: Adding to iommu group 47 [ 3.916023] pci 0000:ff:13.1: Adding to iommu group 47 [ 3.921193] pci 0000:ff:13.4: Adding to iommu group 47 [ 3.926369] pci 0000:ff:13.5: Adding to iommu group 47 [ 3.931573] pci 0000:ff:16.0: Adding to iommu group 48 [ 3.936747] pci 0000:ff:16.1: Adding to iommu group 48 [ 3.941918] pci 0000:ff:16.2: Adding to iommu group 48 [ 3.950947] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 3.957404] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.963845] software IO TLB: mapped [mem 0x0000000079e2c000-0x000000007de2c000] (64MB) [ 3.972331] Initialise system trusted keyrings [ 3.976802] Key type blacklist registered [ 3.980897] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 3.989178] zbud: loaded [ 3.992037] integrity: Platform Keyring initialized [ 3.996932] integrity: Machine keyring initialized [ 4.001729] Key type asymmetric registered [ 4.005826] Asymmetric key parser 'x509' registered [ 4.038932] Freeing initrd memory: 40392K [ 4.050203] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 4.055989] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 4.063426] io scheduler mq-deadline registered [ 4.070403] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.077213] Monitor-Mwait will be used to enter C-1 state [ 4.077227] Monitor-Mwait will be used to enter C-2 state [ 4.077234] ACPI: \_SB_.SCK0.C000: Found 2 idle states [ 4.087367] ERST: Error Record Serialization Table (ERST) support is initialized. [ 4.094859] pstore: Registered erst as persistent store backend [ 4.100922] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.107361] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.115470] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.123683] Linux agpgart interface v0.103 [ 4.127926] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 4.137064] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 4.143943] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 4.153530] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.158501] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.163714] mousedev: PS/2 mouse device common for all mice [ 4.169329] rtc_cmos 00:02: RTC can wake from S4 [ 4.174233] rtc_cmos 00:02: registered as rtc0 [ 4.178718] rtc_cmos 00:02: setting system clock to 2024-09-13T22:17:28 UTC (1726265848) [ 4.186843] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.194662] intel_pstate: Intel P-state driver initializing [ 4.200568] ledtrig-cpu: registered to indicate activity on CPUs [ 4.225039] NET: Registered PF_INET6 protocol family [ 4.238660] Segment Routing with IPv6 [ 4.242356] In-situ OAM (IOAM) with IPv6 [ 4.246318] mip6: Mobile IPv6 [ 4.249290] NET: Registered PF_PACKET protocol family [ 4.254435] mpls_gso: MPLS GSO support [ 4.258705] microcode: sig=0x306e4, pf=0x8, revision=0x42e [ 4.264255] microcode: Microcode Update Driver: v2.2. [ 4.264263] IPI shorthand broadcast: enabled [ 4.273623] sched_clock: Marking stable (3284118017, 989470959)->(4641321464, -367732488) [ 4.282051] registered taskstats version 1 [ 4.286166] Loading compiled-in X.509 certificates [ 4.330422] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.339153] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 4.349840] zswap: loaded using pool lzo/zbud [ 4.354454] Key type .fscrypt registered [ 4.358383] Key type fscrypt-provisioning registered [ 4.363692] pstore: Using crash dump compression: deflate [ 4.376256] Key type encrypted registered [ 4.380298] AppArmor: AppArmor sha1 policy hashing enabled [ 4.385794] ima: No TPM chip found, activating TPM-bypass! [ 4.391276] ima: Allocated hash algorithm: sha256 [ 4.395997] ima: No architecture policies found [ 4.400545] evm: Initialising EVM extended attributes: [ 4.405680] evm: security.selinux [ 4.408995] evm: security.SMACK64 (disabled) [ 4.413262] evm: security.SMACK64EXEC (disabled) [ 4.417882] evm: security.SMACK64TRANSMUTE (disabled) [ 4.422933] evm: security.SMACK64MMAP (disabled) [ 4.427554] evm: security.apparmor [ 4.430959] evm: security.ima [ 4.433933] evm: security.capability [ 4.437512] evm: HMAC attrs: 0x1 [ 4.615640] clk: Disabling unused clocks [ 4.621248] Freeing unused decrypted memory: 2036K [ 4.626690] Freeing unused kernel image (initmem) memory: 2796K [ 4.632693] Write protecting the kernel read-only data: 26624k [ 4.639218] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 4.646151] Freeing unused kernel image (rodata/data gap) memory: 1168K [ 4.735699] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.742139] x86/mm: Checking user space page tables [ 4.822432] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.828878] Run /init as init process [ 4.832539] with arguments: [ 4.832541] /init [ 4.832543] with environment: [ 4.832544] HOME=/ [ 4.832545] TERM=linux [ 4.832546] BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 [ 4.989493] tsc: Refined TSC clocksource calibration: 1799.999 MHz [ 4.995693] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 5.005724] clocksource: Switched to clocksource tsc [ 5.044653] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 5.054695] i2c i2c-0: 1/6 memory slots populated (from DMI) [ 5.060382] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 5.089420] e1000e: Intel(R) PRO/1000 Network Driver [ 5.089739] ACPI: bus type USB registered [ 5.094416] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 5.098457] usbcore: registered new interface driver usbfs [ 5.106241] SCSI subsystem initialized [ 5.109839] usbcore: registered new interface driver hub [ 5.110135] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.128208] usbcore: registered new device driver usb [ 5.148991] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.154617] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.162076] ehci-pci 0000:00:1a.0: debug port 2 [ 5.167907] libata version 3.00 loaded. [ 5.168640] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 5.170601] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 5.186446] ahci 0000:00:1f.2: version 3.0 [ 5.196731] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 5.204930] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 5.204966] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.218772] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.225957] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a6 [ 5.227042] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.234955] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 5.242169] usb usb1: Product: EHCI Host Controller [ 5.249123] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.253926] usb usb1: Manufacturer: Linux 6.1.0-25-amd64 ehci_hcd [ 5.260928] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.266715] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.266929] hub 1-0:1.0: USB hub found [ 5.277178] scsi host0: ahci [ 5.280659] hub 1-0:1.0: 2 ports detected [ 5.284845] scsi host1: ahci [ 5.287651] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.291804] scsi host2: ahci [ 5.294211] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.299609] scsi host3: ahci [ 5.302348] ehci-pci 0000:00:1d.0: debug port 2 [ 5.309877] scsi host4: ahci [ 5.316619] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 5.317355] scsi host5: ahci [ 5.328659] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 32 [ 5.329047] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 5.331698] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 5.333500] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.333567] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.333571] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.333573] usb usb2: Product: EHCI Host Controller [ 5.333575] usb usb2: Manufacturer: Linux 6.1.0-25-amd64 ehci_hcd [ 5.333577] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.333762] hub 2-0:1.0: USB hub found [ 5.333770] hub 2-0:1.0: 2 ports detected [ 5.336072] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 32 [ 5.342522] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 5.350068] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 32 [ 5.374107] isci 0000:04:00.0: OEM parameter table found in OROM [ 5.376632] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 32 [ 5.382729] isci 0000:04:00.0: OEM SAS parameters (version: 1.0) loaded (platform) [ 5.382856] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a7 [ 5.382861] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 5.382953] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.387336] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 32 [ 5.392631] e1000e 0000:05:00.0 enx002590eb25a6: renamed from eth0 [ 5.395101] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 32 [ 5.396748] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 5.490789] scsi host6: isci [ 5.505653] e1000e 0000:06:00.0 enx002590eb25a7: renamed from eth1 [ 5.545547] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.589528] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.712414] ata6: SATA link down (SStatus 0 SControl 300) [ 5.717858] ata4: SATA link down (SStatus 0 SControl 300) [ 5.723285] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.729521] ata5: SATA link down (SStatus 0 SControl 300) [ 5.734965] ata2: SATA link down (SStatus 0 SControl 300) [ 5.740426] ata3: SATA link down (SStatus 0 SControl 300) [ 5.740558] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.745884] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 5.754049] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.768269] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.768726] hub 1-1:1.0: USB hub found [ 5.779190] hub 1-1:1.0: 6 ports detected [ 5.783411] ata1.00: configured for UDMA/133 [ 5.787744] scsi: waiting for bus probes to complete ... [ 5.788057] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.801250] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.808787] hub 2-1:1.0: USB hub found [ 5.812714] hub 2-1:1.0: 8 ports detected [ 5.925719] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 5.956334] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.964022] sd 0:0:0:0: [sda] Write Protect is off [ 5.968826] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.968858] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.977955] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 6.009149] sda: sda1 sda2 < sda5 > [ 6.013033] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.069536] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 6.187429] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 6.195827] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.203147] usb 1-1.1: Product: Hermon USB hidmouse Device [ 6.208648] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 6.230331] hid: raw HID events driver (C) Jiri Kosina [ 6.243299] usbcore: registered new interface driver usbhid [ 6.248909] usbhid: USB HID core driver [ 6.256134] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input3 [ 6.270969] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 6.285913] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input4 [ 6.365768] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.377972] device-mapper: uevent: version 1.0.3 [ 6.382701] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 6.445646] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 7.181877] PM: Image not found (code -22) [ 7.540638] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 7.552268] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 7.734184] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 9.419949] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 9.441523] ACPI: button: Power Button [PWRB] [ 9.445993] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 9.453445] ACPI: button: Power Button [PWRF] [ 9.665575] dca service started, version 1.12.1 [ 9.673449] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 9.680590] IPMI message handler: version 39.2 [ 9.730481] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.735944] ipmi device interface [ 9.752385] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 9.769803] ipmi_si: IPMI System Interface driver [ 9.775615] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 9.782021] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 9.789990] ipmi_si: Adding SMBIOS-specified kcs state machine [ 9.798923] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 9.805056] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 9.851337] ACPI: bus type drm_connector registered [ 9.868161] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 9.876098] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 9.881858] RAPL PMU: hw unit of domain package 2^-16 Joules [ 9.887539] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 9.896784] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 9.905519] ipmi_si: Adding ACPI-specified kcs state machine [ 9.911449] iTCO_vendor_support: vendor-support=0 [ 9.911599] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 9.926331] cryptd: max_cpu_qlen set to 1000 [ 9.932245] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 10.052988] AVX version of gcm_enc/dec engaged. [ 10.057615] AES CTR mode by8 optimization enabled [ 10.071582] mgag200 0000:07:01.0: vgaarb: deactivate vga console [ 10.082577] Console: switching to colour dummy device 80x25 [ 10.094055] [drm] Initialized mgag200 1.0.0 20110418 for 0000:07:01.0 on minor 0 [ 10.103316] fbcon: mgag200drmfb (fb0) is primary device [ 10.135506] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 10.165484] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 10.240077] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x0703, dev_id: 0x20) [ 10.344751] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 10.385934] ipmi_ssif: IPMI SSIF Interface driver [ 10.469657] Console: switching to colour frame buffer device 128x48 [ 10.586840] mgag200 0000:07:01.0: [drm] fb0: mgag200drmfb frame buffer device [ 11.125539] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 11.125568] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 11.125575] EDAC sbridge: Seeking for: PCI ID 8086:0e60 [ 11.125583] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 11.125592] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 11.125596] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 11.125604] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 11.125608] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 11.125616] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 11.125620] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 11.125628] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 11.125632] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 11.125640] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 11.125643] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 11.125652] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 11.125656] EDAC sbridge: Seeking for: PCI ID 8086:0e68 [ 11.125663] EDAC sbridge: Seeking for: PCI ID 8086:0e79 [ 11.125671] EDAC sbridge: Seeking for: PCI ID 8086:0e6a [ 11.125679] EDAC sbridge: Seeking for: PCI ID 8086:0e6b [ 11.125686] EDAC sbridge: Seeking for: PCI ID 8086:0e6c [ 11.125694] EDAC sbridge: Seeking for: PCI ID 8086:0e6d [ 11.125701] EDAC sbridge: Seeking for: PCI ID 8086:0eb8 [ 11.125709] EDAC sbridge: Seeking for: PCI ID 8086:0ebc [ 11.125717] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 11.125726] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 11.125729] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 11.125738] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 11.125740] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 11.125750] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 11.125890] EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT) [ 11.136962] EDAC sbridge: Ver: 1.1.2 [ 11.248904] intel_rapl_common: Found RAPL domain package [ 11.254241] intel_rapl_common: Found RAPL domain core [ 11.259303] intel_rapl_common: Found RAPL domain dram [ 12.368292] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 13.482698] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 13.517847] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 13.591163] Adding 1949692k swap on /dev/mapper/fiano1--vg-swap_1. Priority:-2 extents:1 across:1949692k FS [ 14.121551] audit: type=1400 audit(1726265858.108:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1067 comm="apparmor_parser" [ 14.136775] audit: type=1400 audit(1726265858.108:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1068 comm="apparmor_parser" [ 14.152167] audit: type=1400 audit(1726265858.108:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1068 comm="apparmor_parser" [ 14.184464] audit: type=1400 audit(1726265858.168:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1070 comm="apparmor_parser" [ 14.199612] audit: type=1400 audit(1726265858.168:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1070 comm="apparmor_parser" [ 14.214550] audit: type=1400 audit(1726265858.168:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1070 comm="apparmor_parser" [ 14.381385] audit: type=1400 audit(1726265858.364:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=1077 comm="apparmor_parser" [ 14.396750] audit: type=1400 audit(1726265858.372:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1069 comm="apparmor_parser" [ 14.414736] audit: type=1400 audit(1726265858.376:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1069 comm="apparmor_parser" [ 14.432195] audit: type=1400 audit(1726265858.376:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1069 comm="apparmor_parser" [ 17.454567] e1000e 0000:05:00.0 enx002590eb25a6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 17.464345] IPv6: ADDRCONF(NETDEV_CHANGE): enx002590eb25a6: link becomes ready