[ 0.000000] Linux version 6.1.110+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Fri Sep 13 21:24:17 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/godello0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] Xen: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020060fff] usable [ 0.000000] Xen: [mem 0x000000009573f000-0x0000000095bbefff] reserved [ 0.000000] Xen: [mem 0x0000000095bbf000-0x0000000095fbefff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000095fbf000-0x0000000095ffefff] ACPI data [ 0.000000] Xen: [mem 0x0000000096000000-0x000000009fffffff] reserved [ 0.000000] Xen: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] Xen: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed90fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. PowerEdge R220/081N4V, BIOS 1.1.4 05/06/2014 [ 0.000000] Hypervisor detected: Xen PV [ 0.000462] tsc: Detected 3092.840 MHz processor [ 0.000766] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000769] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000774] last_pfn = 0x20061 max_arch_pfn = 0x400000000 [ 0.000775] Disabled [ 0.000776] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000779] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000809] Kernel/User page tables isolation: disabled on XEN PV. [ 0.020400] RAMDISK: [mem 0x04000000-0x05424fff] [ 0.020406] ACPI: Early table checksum verification disabled [ 0.021122] ACPI: RSDP 0x00000000000FE020 000024 (v02 DELL ) [ 0.021131] ACPI: XSDT 0x0000000095FCF188 0000E4 (v01 DELL PE_SC3 00000001 01000013) [ 0.021161] ACPI: FACP 0x0000000095FF7000 00010C (v05 DELL PE_SC3 00000001 DELL 00040000) [ 0.021199] ACPI: DSDT 0x0000000095FDF000 012335 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.021210] ACPI: FACS 0x0000000095FBD000 000040 [ 0.021222] ACPI: UEFI 0x0000000095FFD000 000236 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.021233] ACPI: UEFI 0x0000000095FFC000 000042 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.021245] ACPI: ASF! 0x0000000095FFB000 0000A5 (v32 DELL PE_SC3 00000001 DELL 00040000) [ 0.021256] ACPI: ASPT 0x0000000095FFA000 000034 (v07 DELL PE_SC3 00000001 DELL 00040000) [ 0.021268] ACPI: BOOT 0x0000000095FF9000 000028 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.021279] ACPI: DBGP 0x0000000095FF8000 000034 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.021291] ACPI: HPET 0x0000000095FF6000 000038 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.021302] ACPI: APIC 0x0000000095FF5000 000092 (v03 DELL PE_SC3 00000001 DELL 00040000) [ 0.021314] ACPI: MCFG 0x0000000095FF4000 00003C (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.021325] ACPI: SLIC 0x0000000095FF3000 000176 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.021337] ACPI: SSDT 0x0000000095FDC000 002028 (v01 DELL PE_SC3 00001000 DELL 00040000) [ 0.021349] ACPI: SPMI 0x0000000095FDA000 000040 (v05 DELL PE_SC3 00000001 DELL 00040000) [ 0.021360] ACPI: SSDT 0x0000000095FD9000 000533 (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.021372] ACPI: SSDT 0x0000000095FD8000 000ACE (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.021383] ACPI: SSDT 0x0000000095FD4000 003492 (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.021395] ACPI: SPCR 0x0000000095FF2000 000050 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.021407] ACPI: RMAD 0x0000000095FD3000 000080 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.021418] ACPI: SSDT 0x0000000095FD2000 000514 (v01 DELL PE_SC3 00001000 DELL 00040000) [ 0.021429] ACPI: FPDT 0x0000000095FD1000 000044 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.021441] ACPI: HEST 0x0000000095FD0000 0000A8 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.021453] ACPI: ERST 0x0000000095FCE000 000230 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.021464] ACPI: BERT 0x0000000095FCD000 000030 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.021476] ACPI: EINJ 0x0000000095FCC000 000150 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.021482] ACPI: Reserving FACP table memory at [mem 0x95ff7000-0x95ff710b] [ 0.021483] ACPI: Reserving DSDT table memory at [mem 0x95fdf000-0x95ff1334] [ 0.021484] ACPI: Reserving FACS table memory at [mem 0x95fbd000-0x95fbd03f] [ 0.021485] ACPI: Reserving UEFI table memory at [mem 0x95ffd000-0x95ffd235] [ 0.021486] ACPI: Reserving UEFI table memory at [mem 0x95ffc000-0x95ffc041] [ 0.021486] ACPI: Reserving ASF! table memory at [mem 0x95ffb000-0x95ffb0a4] [ 0.021487] ACPI: Reserving ASPT table memory at [mem 0x95ffa000-0x95ffa033] [ 0.021488] ACPI: Reserving BOOT table memory at [mem 0x95ff9000-0x95ff9027] [ 0.021488] ACPI: Reserving DBGP table memory at [mem 0x95ff8000-0x95ff8033] [ 0.021489] ACPI: Reserving HPET table memory at [mem 0x95ff6000-0x95ff6037] [ 0.021490] ACPI: Reserving APIC table memory at [mem 0x95ff5000-0x95ff5091] [ 0.021490] ACPI: Reserving MCFG table memory at [mem 0x95ff4000-0x95ff403b] [ 0.021491] ACPI: Reserving SLIC table memory at [mem 0x95ff3000-0x95ff3175] [ 0.021492] ACPI: Reserving SSDT table memory at [mem 0x95fdc000-0x95fde027] [ 0.021492] ACPI: Reserving SPMI table memory at [mem 0x95fda000-0x95fda03f] [ 0.021493] ACPI: Reserving SSDT table memory at [mem 0x95fd9000-0x95fd9532] [ 0.021494] ACPI: Reserving SSDT table memory at [mem 0x95fd8000-0x95fd8acd] [ 0.021494] ACPI: Reserving SSDT table memory at [mem 0x95fd4000-0x95fd7491] [ 0.021495] ACPI: Reserving SPCR table memory at [mem 0x95ff2000-0x95ff204f] [ 0.021496] ACPI: Reserving RMAD table memory at [mem 0x95fd3000-0x95fd307f] [ 0.021497] ACPI: Reserving SSDT table memory at [mem 0x95fd2000-0x95fd2513] [ 0.021497] ACPI: Reserving FPDT table memory at [mem 0x95fd1000-0x95fd1043] [ 0.021498] ACPI: Reserving HEST table memory at [mem 0x95fd0000-0x95fd00a7] [ 0.021499] ACPI: Reserving ERST table memory at [mem 0x95fce000-0x95fce22f] [ 0.021499] ACPI: Reserving BERT table memory at [mem 0x95fcd000-0x95fcd02f] [ 0.021500] ACPI: Reserving EINJ table memory at [mem 0x95fcc000-0x95fcc14f] [ 0.021543] Setting APIC routing to Xen PV. [ 0.024329] Zone ranges: [ 0.024330] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.024332] DMA32 [mem 0x0000000001000000-0x0000000020060fff] [ 0.024333] Normal empty [ 0.024334] Movable zone start for each node [ 0.024335] Early memory node ranges [ 0.024335] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.024336] node 0: [mem 0x0000000000100000-0x0000000020060fff] [ 0.024337] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020060fff] [ 0.024342] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.024384] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.026088] On node 0, zone DMA32: 32671 pages in unavailable ranges [ 0.026090] p2m virtual area at (____ptrval____), size is 40000000 [ 0.159465] Remapped 97 page(s) [ 0.159976] ACPI: PM-Timer IO Port: 0x1808 [ 0.160012] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.160042] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.160051] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.160053] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.160070] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.160074] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.160081] ACPI: SPCR: SPCR table version 1 [ 0.160082] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.160130] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.160143] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.160145] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.160146] [mem 0x20061000-0x9573efff] available for PCI devices [ 0.160150] Booting kernel on Xen [ 0.160150] Xen version: 4.20-unstable (preserve-AD) [ 0.160153] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.164634] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.164890] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u524288 [ 0.164895] pcpu-alloc: s180520 r8192 d32472 u524288 alloc=1*2097152 [ 0.164898] pcpu-alloc: [0] 0 1 2 3 [ 0.164944] xen: PV spinlocks enabled [ 0.164946] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.164949] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.164951] Kernel command line: placeholder root=/dev/mapper/godello0--vg-root ro console=hvc0 [ 0.164981] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.164996] random: crng init done [ 0.165032] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.165056] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.165571] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.165574] software IO TLB: area num 4. [ 0.216104] Memory: 390152K/524284K available (14349K kernel code, 2686K rwdata, 4584K rodata, 1580K init, 1288K bss, 133880K reserved, 0K cma-reserved) [ 0.216221] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.218120] Dynamic Preempt: voluntary [ 0.218177] rcu: Preemptible hierarchical RCU implementation. [ 0.218178] rcu: RCU event tracing is enabled. [ 0.218179] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.218180] Trampoline variant of Tasks RCU enabled. [ 0.218181] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.218181] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.225526] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.225613] xen:events: Using FIFO-based ABI [ 0.225631] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.225638] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.225643] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.225648] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.225653] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.225661] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.225666] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.225671] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.225676] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.225681] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.225687] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.225692] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.225697] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.225702] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.225707] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.225715] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.234902] Console: colour VGA+ 80x25 [ 0.253900] printk: console [tty0] enabled [ 0.254972] printk: console [hvc0] enabled [ 0.255149] ACPI: Core revision 20220331 [ 0.265907] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.266094] Xen: using vcpuop timer interface [ 0.266102] installing Xen timer for CPU 0 [ 0.266273] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c94dc1ce7d, max_idle_ns: 440795323863 ns [ 0.266459] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.68 BogoMIPS (lpj=3092840) [ 0.266769] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.266912] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.267062] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.267240] Spectre V2 : Mitigation: Retpolines [ 0.267464] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.267637] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.267781] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.267921] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.268096] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.268244] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.268462] MDS: Mitigation: Clear CPU buffers [ 0.268600] MMIO Stale Data: Unknown: No mitigations [ 0.268739] SRBDS: Unknown: Dependent on hypervisor status [ 0.268894] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.269076] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.269214] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.269361] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.269460] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.282380] Freeing SMP alternatives memory: 40K [ 0.282462] pid_max: default: 32768 minimum: 301 [ 0.282615] LSM: Security Framework initializing [ 0.282758] SELinux: Initializing. [ 0.282916] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.283089] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.283526] cpu 0 spinlock event irq 25 [ 0.283668] VPMU disabled by hypervisor. [ 0.284027] cblist_init_generic: Setting adjustable number of callback queues. [ 0.284201] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.284371] Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only. [ 0.284462] signal: max sigframe size: 1776 [ 0.284634] rcu: Hierarchical SRCU implementation. [ 0.284772] rcu: Max phase no-delay instances is 400. [ 0.285154] smp: Bringing up secondary CPUs ... [ 0.285445] installing Xen timer for CPU 1 [ 0.285735] cpu 1 spinlock event irq 35 [ 0.286530] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.286880] installing Xen timer for CPU 2 [ 0.287299] cpu 2 spinlock event irq 41 [ 0.287607] installing Xen timer for CPU 3 [ 0.288010] cpu 3 spinlock event irq 47 [ 0.288010] smp: Brought up 1 node, 4 CPUs [ 0.288462] smpboot: Max logical packages: 1 [ 0.288669] devtmpfs: initialized [ 0.288669] x86/mm: Memory block size: 128MB [ 0.288901] ACPI: PM: Registering ACPI NVS region [mem 0x95bbf000-0x95fbefff] (4194304 bytes) [ 0.289530] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.289711] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.289957] PM: RTC time: 22:22:10, date: 2024-09-13 [ 0.290170] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.290332] xen:grant_table: Grant tables using version 1 layout [ 0.290474] Grant table initialized [ 0.290702] audit: initializing netlink subsys (disabled) [ 0.290860] audit: type=2000 audit(1726266130.870:1): state=initialized audit_enabled=0 res=1 [ 0.290860] thermal_sys: Registered thermal governor 'step_wise' [ 0.290860] thermal_sys: Registered thermal governor 'user_space' [ 0.290860] Simple Boot Flag at 0x44 set to 0x1 [ 0.291486] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.291762] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.291945] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 0.336216] PCI: Using configuration type 1 for base access [ 0.336424] PCI: Dell System detected, enabling pci=bfsort. [ 0.338261] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.338504] ACPI: Added _OSI(Module Device) [ 0.338630] ACPI: Added _OSI(Processor Device) [ 0.338772] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.338913] ACPI: Added _OSI(Processor Aggregator Device) [ 0.349079] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.349851] xen: registering gsi 9 triggering 0 polarity 0 [ 0.350318] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.352457] ACPI: Dynamic OEM Table Load: [ 0.352457] ACPI: SSDT 0xFFFF888003C49000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120816) [ 0.352997] ACPI: Dynamic OEM Table Load: [ 0.353140] ACPI: SSDT 0xFFFF888003CA2000 0005AA (v01 PmRef ApIst 00003000 INTL 20120816) [ 0.353946] ACPI: Dynamic OEM Table Load: [ 0.354089] ACPI: SSDT 0xFFFF888003658800 000119 (v01 PmRef ApCst 00003000 INTL 20120816) [ 0.355378] ACPI: Interpreter enabled [ 0.355479] ACPI: PM: (supports S0 S4 S5) [ 0.355615] ACPI: Using IOAPIC for interrupt routing [ 0.355775] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.355956] PCI: Using E820 reservations for host bridge windows [ 0.356350] ACPI: Enabled 11 GPEs in block 00 to 3F [ 0.362192] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1) [ 0.369960] ACPI: PM: Power Resource [FN00] [ 0.370136] ACPI: PM: Power Resource [FN01] [ 0.370305] ACPI: PM: Power Resource [FN02] [ 0.370476] ACPI: PM: Power Resource [FN03] [ 0.370648] ACPI: PM: Power Resource [FN04] [ 0.371484] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) [ 0.371634] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.372636] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability LTR] [ 0.372783] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.373435] PCI host bridge to bus 0000:00 [ 0.373462] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.373608] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.373753] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.373926] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff window] [ 0.374099] pci_bus 0000:00: root bus resource [bus 00-7e] [ 0.374273] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000 [ 0.374817] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.375032] pci 0000:00:14.0: reg 0x10: [mem 0xa2b00000-0xa2b0ffff 64bit] [ 0.375447] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.376685] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.376884] pci 0000:00:1a.0: reg 0x10: [mem 0xa2b12000-0xa2b123ff] [ 0.377340] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.377646] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.378150] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.378365] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.378470] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.378954] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 [ 0.379450] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.379530] pci 0000:00:1c.2: Enabling MPC IRBNCE [ 0.379672] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled [ 0.380166] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.380365] pci 0000:00:1d.0: reg 0x10: [mem 0xa2b11000-0xa2b113ff] [ 0.380779] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.381112] pci 0000:00:1f.0: [8086:8c52] type 00 class 0x060100 [ 0.381774] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.381977] pci 0000:00:1f.2: reg 0x10: [io 0x3048-0x304f] [ 0.382146] pci 0000:00:1f.2: reg 0x14: [io 0x3054-0x3057] [ 0.382317] pci 0000:00:1f.2: reg 0x18: [io 0x3040-0x3047] [ 0.382491] pci 0000:00:1f.2: reg 0x1c: [io 0x3050-0x3053] [ 0.382667] pci 0000:00:1f.2: reg 0x20: [io 0x3020-0x303f] [ 0.382835] pci 0000:00:1f.2: reg 0x24: [mem 0xa2b10000-0xa2b107ff] [ 0.383147] pci 0000:00:1f.2: PME# supported from D3hot [ 0.383433] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.383537] pci 0000:00:1f.3: reg 0x10: [mem 0xa2b13000-0xa2b130ff 64bit] [ 0.383770] pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f] [ 0.384336] pci 0000:01:00.0: [14e4:165f] type 00 class 0x020000 [ 0.384621] pci 0000:01:00.0: reg 0x10: [mem 0xa2a30000-0xa2a3ffff 64bit pref] [ 0.384912] pci 0000:01:00.0: reg 0x18: [mem 0xa2a40000-0xa2a4ffff 64bit pref] [ 0.385201] pci 0000:01:00.0: reg 0x20: [mem 0xa2a50000-0xa2a5ffff 64bit pref] [ 0.385466] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 0.386032] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.386823] pci 0000:01:00.1: [14e4:165f] type 00 class 0x020000 [ 0.387125] pci 0000:01:00.1: reg 0x10: [mem 0xa2a00000-0xa2a0ffff 64bit pref] [ 0.387410] pci 0000:01:00.1: reg 0x18: [mem 0xa2a10000-0xa2a1ffff 64bit pref] [ 0.387581] pci 0000:01:00.1: reg 0x20: [mem 0xa2a20000-0xa2a2ffff 64bit pref] [ 0.387846] pci 0000:01:00.1: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 0.388484] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold [ 0.389264] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.389438] pci 0000:00:1c.0: bridge window [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.390011] pci 0000:02:00.0: [1912:0013] type 01 class 0x060400 [ 0.393077] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.394637] pci 0000:00:1c.2: PCI bridge to [bus 02-06] [ 0.394799] pci 0000:00:1c.2: bridge window [mem 0xa2000000-0xa29fffff] [ 0.394956] pci 0000:00:1c.2: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.396425] pci 0000:03:00.0: [1912:0013] type 01 class 0x060400 [ 0.399757] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.401572] pci 0000:03:01.0: [1912:0013] type 01 class 0x060400 [ 0.405269] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold [ 0.408898] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 0.409240] pci 0000:02:00.0: bridge window [mem 0xa2000000-0xa29fffff] [ 0.409494] pci 0000:02:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.410985] pci 0000:04:00.0: [1912:0012] type 01 class 0x060400 [ 0.416579] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 0.416940] pci 0000:03:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.417238] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.418460] pci_bus 0000:05: extended config space not accessible [ 0.418848] pci 0000:05:00.0: [102b:0534] type 00 class 0x030000 [ 0.419460] pci 0000:05:00.0: reg 0x10: [mem 0xa1000000-0xa1ffffff pref] [ 0.430728] pci 0000:05:00.0: reg 0x14: [mem 0xa2800000-0xa2803fff] [ 0.431129] pci 0000:05:00.0: reg 0x18: [mem 0xa2000000-0xa27fffff] [ 0.432614] pci 0000:05:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.436122] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.436460] pci 0000:04:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.436750] pci 0000:04:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.438535] pci 0000:06:00.0: [1912:0011] type 00 class 0x050000 [ 0.439171] pci 0000:06:00.0: reg 0x10: [mem 0xa2901000-0xa2901fff] [ 0.439573] pci 0000:06:00.0: reg 0x14: [mem 0xa2900000-0xa290007f] [ 0.441993] pci 0000:06:00.0: PME# supported from D3hot [ 0.442940] pci 0000:03:01.0: PCI bridge to [bus 06] [ 0.443295] pci 0000:03:01.0: bridge window [mem 0xa2900000-0xa29fffff] [ 0.444507] pci_bus 0000:00: on NUMA node 0 [ 0.444701] xen: registering gsi 13 triggering 1 polarity 0 [ 0.445696] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.445916] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.446127] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.446337] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.446529] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.446678] ACPI: PCI: Interrupt link LNKE disabled [ 0.446881] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.447019] ACPI: PCI: Interrupt link LNKF disabled [ 0.447228] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.447370] ACPI: PCI: Interrupt link LNKG disabled [ 0.447534] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.449255] xen:balloon: Initialising balloon driver [ 0.449507] iommu: Default domain type: Translated [ 0.449648] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.449831] SCSI subsystem initialized [ 0.450479] libata version 3.00 loaded. [ 0.450485] ACPI: bus type USB registered [ 0.450651] usbcore: registered new interface driver usbfs [ 0.450797] usbcore: registered new interface driver hub [ 0.450797] usbcore: registered new device driver usb [ 0.450797] pps_core: LinuxPPS API ver. 1 registered [ 0.450797] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.450953] PTP clock support registered [ 0.451485] Advanced Linux Sound Architecture Driver Initialized. [ 0.451720] NetLabel: Initializing [ 0.451720] NetLabel: domain hash size = 128 [ 0.451720] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.451767] NetLabel: unlabeled traffic allowed by default [ 0.452481] PCI: Using ACPI for IRQ routing [ 0.469030] PCI: pci_cache_line_size set to 64 bytes [ 0.469664] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.469666] e820: reserve RAM buffer [mem 0x20061000-0x23ffffff] [ 0.469684] pci 0000:05:00.0: vgaarb: setting as boot VGA device [ 0.469767] pci 0000:05:00.0: vgaarb: bridge control possible [ 0.469913] pci 0000:05:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.470091] vgaarb: loaded [ 0.471709] clocksource: Switched to clocksource tsc-early [ 0.471905] VFS: Disk quotas dquot_6.6.0 [ 0.472050] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.472210] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.472389] pnp: PnP ACPI init [ 0.472406] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.472550] system 00:00: [io 0xffff] has been reserved [ 0.472690] system 00:00: [io 0xffff] has been reserved [ 0.472831] system 00:00: [io 0xffff] has been reserved [ 0.472970] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.473113] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.473282] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.473463] xen: registering gsi 8 triggering 1 polarity 0 [ 0.473521] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.473946] xen: registering gsi 3 triggering 1 polarity 0 [ 0.474204] xen: registering gsi 4 triggering 1 polarity 0 [ 0.474207] Already setup the GSI :4 [ 0.474537] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.474684] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.474828] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.474974] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.475117] system 00:06: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.475263] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.475408] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.475559] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved [ 0.475703] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.475850] system 00:06: [mem 0xa0000000-0xa0000fff] has been reserved [ 0.476017] system 00:06: [mem 0xa0020000-0xa002ffff] has been reserved [ 0.477030] pnp: PnP ACPI: found 7 devices [ 0.498704] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.498871] NET: Registered PF_INET protocol family [ 0.499042] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.499372] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.499557] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.499745] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.500030] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.500219] TCP: Hash tables configured (established 4096 bind 4096) [ 0.500378] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.500528] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.500690] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.501009] RPC: Registered named UNIX socket transport module. [ 0.501152] RPC: Registered udp transport module. [ 0.501290] RPC: Registered tcp transport module. [ 0.501428] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.501826] clipped [mem size 0x00020000] to [mem size 0xfffffffffffc0000] for e820 entry [mem 0x0009f000-0x000fffff] [ 0.502009] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0100000-0xa01fffff] [ 0.502156] pci 0000:01:00.0: BAR 6: assigned [mem 0xa0100000-0xa013ffff pref] [ 0.502331] pci 0000:01:00.1: BAR 6: assigned [mem 0xa0140000-0xa017ffff pref] [ 0.502514] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.502667] pci 0000:00:1c.0: bridge window [mem 0xa0100000-0xa01fffff] [ 0.502820] pci 0000:00:1c.0: bridge window [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.503012] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.503300] pci 0000:04:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.503545] pci 0000:04:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.503913] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 0.504211] pci 0000:03:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.504450] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.504821] pci 0000:03:01.0: PCI bridge to [bus 06] [ 0.505103] pci 0000:03:01.0: bridge window [mem 0xa2900000-0xa29fffff] [ 0.505606] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 0.505887] pci 0000:02:00.0: bridge window [mem 0xa2000000-0xa29fffff] [ 0.506116] pci 0000:02:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.506535] pci 0000:00:1c.2: PCI bridge to [bus 02-06] [ 0.506683] pci 0000:00:1c.2: bridge window [mem 0xa2000000-0xa29fffff] [ 0.506831] pci 0000:00:1c.2: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.507020] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.507162] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.507306] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.507451] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff window] [ 0.507603] pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa01fffff] [ 0.507741] pci_bus 0000:01: resource 2 [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.507912] pci_bus 0000:02: resource 1 [mem 0xa2000000-0xa29fffff] [ 0.508056] pci_bus 0000:02: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.508228] pci_bus 0000:03: resource 1 [mem 0xa2000000-0xa29fffff] [ 0.508370] pci_bus 0000:03: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.508549] pci_bus 0000:04: resource 1 [mem 0xa2000000-0xa28fffff] [ 0.508690] pci_bus 0000:04: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.508863] pci_bus 0000:05: resource 1 [mem 0xa2000000-0xa28fffff] [ 0.509002] pci_bus 0000:05: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.509174] pci_bus 0000:06: resource 1 [mem 0xa2900000-0xa29fffff] [ 0.509450] xen: registering gsi 16 triggering 0 polarity 1 [ 0.509482] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.510910] xen: registering gsi 16 triggering 0 polarity 1 [ 0.510914] Already setup the GSI :16 [ 0.523577] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 12417 usecs [ 0.523824] xen: registering gsi 23 triggering 0 polarity 1 [ 0.523837] xen: --> pirq=23 -> irq=23 (gsi=23) [ 0.536582] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 12504 usecs [ 0.537070] PCI: CLS 64 bytes, default 64 [ 0.537257] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.537306] Unpacking initramfs... [ 0.537405] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.537791] kvm: no hardware support for 'kvm_intel' [ 0.537932] has_svm: not amd or hygon [ 0.538069] kvm: no hardware support for 'kvm_amd' [ 0.538211] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c94dc1ce7d, max_idle_ns: 440795323863 ns [ 0.538435] clocksource: Switched to clocksource tsc [ 0.542582] Initialise system trusted keyrings [ 0.542811] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.543905] NFS: Registering the id_resolver key type [ 0.544051] Key type id_resolver registered [ 0.544191] Key type id_legacy registered [ 0.544368] 9p: Installing v9fs 9p2000 file system support [ 0.554266] Key type asymmetric registered [ 0.554415] Asymmetric key parser 'x509' registered [ 0.554574] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.554764] io scheduler mq-deadline registered [ 0.554903] io scheduler kyber registered [ 0.555379] xen: registering gsi 16 triggering 0 polarity 1 [ 0.555386] Already setup the GSI :16 [ 0.555723] pcieport 0000:00:1c.0: PME: Signaling with IRQ 50 [ 0.556118] xen: registering gsi 18 triggering 0 polarity 1 [ 0.556134] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.556307] pcieport 0000:00:1c.2: PME: Signaling with IRQ 51 [ 0.560681] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.560936] ACPI: button: Power Button [PWRF] [ 0.561489] Monitor-Mwait will be used to enter C-1 state [ 0.561533] Monitor-Mwait will be used to enter C-2 state [ 0.561544] ACPI: \_PR_.CPU0: Found 2 idle states [ 0.561860] ACPI: \_PR_.CPU1: Found 2 idle states [ 0.573854] ACPI: \_PR_.CPU2: Found 2 idle states [ 0.574227] ACPI: \_PR_.CPU3: Found 2 idle states [ 0.574903] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.575049] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.575406] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.575550] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.575947] xen:xen_evtchn: Event-channel device installed [ 0.576157] xen_pciback: backend is vpci [ 0.576704] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.576958] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.577579] hpet_acpi_add: no address or irqs in _CRS [ 0.577785] Non-volatile memory driver v1.3 [ 0.577928] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.579550] loop: module loaded [ 0.583091] ahci 0000:00:1f.2: version 3.0 [ 0.583179] xen: registering gsi 19 triggering 0 polarity 1 [ 0.583199] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.583355] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.583540] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode [ 0.583718] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 0.590178] scsi host0: ahci [ 0.590526] scsi host1: ahci [ 0.590797] scsi host2: ahci [ 0.591082] scsi host3: ahci [ 0.591353] scsi host4: ahci [ 0.591612] scsi host5: ahci [ 0.591785] ata1: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10100 irq 53 [ 0.591961] ata2: DUMMY [ 0.592091] ata3: DUMMY [ 0.592222] ata4: DUMMY [ 0.592353] ata5: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10300 irq 53 [ 0.592527] ata6: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10380 irq 53 [ 0.592887] tun: Universal TUN/TAP device driver, 1.6 [ 0.593197] xen: registering gsi 16 triggering 0 polarity 1 [ 0.593202] Already setup the GSI :16 [ 0.611552] Freeing initrd memory: 20628K [ 0.627002] tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 54:9f:35:05:fd:58 [ 0.627195] tg3 0000:01:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 0.627380] tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 0.627555] tg3 0000:01:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 0.628166] xen: registering gsi 17 triggering 0 polarity 1 [ 0.628188] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.677084] tg3 0000:01:00.1 eth1: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 54:9f:35:05:fd:5a [ 0.677271] tg3 0000:01:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 0.677452] tg3 0000:01:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 0.677626] tg3 0000:01:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit] [ 0.678081] e100: Intel(R) PRO/100 Network Driver [ 0.678219] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.678372] sky2: driver version 1.30 [ 0.678536] xen_netfront: Initialising Xen virtual ethernet driver [ 0.678855] xen: registering gsi 16 triggering 0 polarity 1 [ 0.678860] Already setup the GSI :16 [ 0.679050] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.679263] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.679465] ehci-pci 0000:00:1a.0: debug port 2 [ 0.683594] ehci-pci 0000:00:1a.0: irq 16, io mem 0xa2b12000 [ 0.690763] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.690971] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.691145] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.691317] usb usb1: Product: EHCI Host Controller [ 0.691452] usb usb1: Manufacturer: Linux 6.1.110+ ehci_hcd [ 0.691593] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.691892] hub 1-0:1.0: USB hub found [ 0.692041] hub 1-0:1.0: 2 ports detected [ 0.692399] xen: registering gsi 23 triggering 0 polarity 1 [ 0.692403] Already setup the GSI :23 [ 0.692589] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.692805] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.693010] ehci-pci 0000:00:1d.0: debug port 2 [ 0.697138] ehci-pci 0000:00:1d.0: irq 23, io mem 0xa2b11000 [ 0.703800] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.704051] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.704227] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.704403] usb usb2: Product: EHCI Host Controller [ 0.704542] usb usb2: Manufacturer: Linux 6.1.110+ ehci_hcd [ 0.704683] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.704995] hub 2-0:1.0: USB hub found [ 0.705147] hub 2-0:1.0: 2 ports detected [ 0.705527] xen: registering gsi 16 triggering 0 polarity 1 [ 0.705531] Already setup the GSI :16 [ 0.705727] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.705994] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.707248] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.707688] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.707909] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.708085] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.708294] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.708470] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.708642] usb usb3: Product: xHCI Host Controller [ 0.708790] usb usb3: Manufacturer: Linux 6.1.110+ xhci-hcd [ 0.708932] usb usb3: SerialNumber: 0000:00:14.0 [ 0.709216] hub 3-0:1.0: USB hub found [ 0.709373] hub 3-0:1.0: 10 ports detected [ 0.712658] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.712850] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.713023] usb usb4: Product: xHCI Host Controller [ 0.713162] usb usb4: Manufacturer: Linux 6.1.110+ xhci-hcd [ 0.713302] usb usb4: SerialNumber: 0000:00:14.0 [ 0.713678] hub 4-0:1.0: USB hub found [ 0.713843] hub 4-0:1.0: 2 ports detected [ 0.714385] usbcore: registered new interface driver usblp [ 0.714539] usbcore: registered new interface driver usb-storage [ 0.714721] i8042: PNP: No PS/2 controller found. [ 0.714976] rtc_cmos 00:02: RTC can wake from S4 [ 0.715532] rtc_cmos 00:02: registered as rtc0 [ 0.715707] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram [ 0.715908] device-mapper: uevent: version 1.0.3 [ 0.715970] xen: registering gsi 18 triggering 0 polarity 1 [ 0.716053] Already setup the GSI :18 [ 0.716151] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.716298] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.716363] intel_pstate: CPU model not supported [ 0.716646] hid: raw HID events driver (C) Jiri Kosina [ 0.716887] usbcore: registered new interface driver usbhid [ 0.717034] usbhid: USB HID core driver [ 0.717483] Initializing XFRM netlink socket [ 0.717686] NET: Registered PF_INET6 protocol family [ 0.718164] Segment Routing with IPv6 [ 0.718307] In-situ OAM (IOAM) with IPv6 [ 0.718468] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.718690] NET: Registered PF_PACKET protocol family [ 0.718878] 9pnet: Installing 9P2000 support [ 0.719029] Key type dns_resolver registered [ 0.719367] IPI shorthand broadcast: enabled [ 0.719523] sched_clock: Marking stable (678597123, 40740215)->(726853301, -7515963) [ 0.719938] registered taskstats version 1 [ 0.720075] Loading compiled-in X.509 certificates [ 0.721104] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.721588] PM: Magic number: 8:154:401 [ 0.721799] printk: console [netcon0] enabled [ 0.721804] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.721805] netconsole: network logging started [ 0.722009] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.730484] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.730798] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.730980] ALSA device list: [ 0.731110] No soundcards found. [ 0.731655] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.905019] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.932795] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.940795] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.948784] usb 3-9: new high-speed USB device number 2 using xhci_hcd [ 0.968343] ata1.00: ATA-8: TOSHIBA MG03ACA100, FL1D, max UDMA/100 [ 0.969296] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.970625] ata1.00: configured for UDMA/100 [ 0.970917] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MG03ACA1 FL1D PQ: 0 ANSI: 5 [ 0.971737] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.971777] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.972091] sd 0:0:0:0: [sda] Write Protect is off [ 0.972237] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.972306] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.972579] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.061500] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.061668] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.062137] hub 1-1:1.0: USB hub found [ 1.062487] hub 1-1:1.0: 4 ports detected [ 1.074158] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.074330] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.074691] hub 2-1:1.0: USB hub found [ 1.074913] hub 2-1:1.0: 6 ports detected [ 1.086804] usb 3-9: New USB device found, idVendor=0624, idProduct=0248, bcdDevice= 0.00 [ 1.086987] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.087124] usb 3-9: Product: Gadget USB HUB [ 1.087255] usb 3-9: Manufacturer: no manufacturer [ 1.087386] usb 3-9: SerialNumber: 0123456789 [ 1.088390] hub 3-9:1.0: USB hub found [ 1.088600] hub 3-9:1.0: 6 ports detected [ 1.159312] sda: sda1 sda2 < sda5 > [ 1.159797] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.280876] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.283714] ata5.00: ATAPI: HL-DT-ST DVD+/-RW GTA0N, A3B0, max UDMA/100 [ 1.288537] ata5.00: configured for UDMA/100 [ 1.292224] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD+-RW GTA0N A3B0 PQ: 0 ANSI: 5 [ 1.332302] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.332488] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.352237] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.352313] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 1.380798] usb 3-9.1: new high-speed USB device number 3 using xhci_hcd [ 1.468034] usb 3-9.1: New USB device found, idVendor=0624, idProduct=0249, bcdDevice= 0.00 [ 1.468217] usb 3-9.1: New USB device strings: Mfr=4, Product=5, SerialNumber=6 [ 1.468390] usb 3-9.1: Product: Keyboard/Mouse Function [ 1.468530] usb 3-9.1: Manufacturer: Avocent [ 1.468674] usb 3-9.1: SerialNumber: 20120917 [ 1.475778] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/0003:0624:0249.0001/input/input1 [ 1.528051] hid-generic 0003:0624:0249.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input0 [ 1.529326] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/0003:0624:0249.0002/input/input2 [ 1.529719] hid-generic 0003:0624:0249.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input1 [ 1.530824] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.2/0003:0624:0249.0003/input/input3 [ 1.531144] hid-generic 0003:0624:0249.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input2 [ 1.657044] ata6: SATA link down (SStatus 0 SControl 300) [ 1.658004] Freeing unused kernel image (initmem) memory: 1580K [ 1.658153] Write protecting the kernel read-only data: 22528k [ 1.671140] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.672091] Freeing unused kernel image (rodata/data gap) memory: 1560K [ 1.874757] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.874906] Run /init as init process [ 1.875070] with arguments: [ 1.875070] /init [ 1.875071] placeholder [ 1.875072] with environment: [ 1.875073] HOME=/ [ 1.875073] TERM=linux [ 2.100667] tg3 0000:01:00.1 enx549f3505fd5a: renamed from eth1 [ 2.107268] tg3 0000:01:00.0 enx549f3505fd58: renamed from eth0 [ 2.767328] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 2.771926] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 6.383353] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 7.504105] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 7.517137] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 7.574606] Adding 1949692k swap on /dev/mapper/godello0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 9.042648] xenbr0: port 1(enx549f3505fd58) entered blocking state [ 9.042845] xenbr0: port 1(enx549f3505fd58) entered disabled state [ 9.043030] device enx549f3505fd58 entered promiscuous mode [ 12.730928] tg3 0000:01:00.0 enx549f3505fd58: Link is up at 1000 Mbps, full duplex [ 12.730981] IPv6: ADDRCONF(NETDEV_CHANGE): enx549f3505fd58: link becomes ready [ 12.731138] tg3 0000:01:00.0 enx549f3505fd58: Flow control is off for TX and off for RX [ 12.731171] xenbr0: port 1(enx549f3505fd58) entered blocking state [ 12.731319] tg3 0000:01:00.0 enx549f3505fd58: EEE is disabled [ 12.731330] xenbr0: port 1(enx549f3505fd58) entered forwarding state [ 12.731991] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready