[ 0.000000] Linux version 6.11.0-rc7+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Sat Sep 14 05:02:53 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/pinot1--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000f6000000-0x00000000f6003fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SML/H8SML, BIOS 3.5 11/25/2013 [ 0.000000] DMI: Memory slots populated: 2/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000010] Xen PV: Detected 4 vCPUS [ 0.000461] tsc: Detected 2800.008 MHz processor [ 0.000673] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000677] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000684] last_pfn = 0xdfeb2 max_arch_pfn = 0x400000000 [ 0.000687] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.000689] MTRRs set to read-only [ 0.000692] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.026541] RAMDISK: [mem 0x04000000-0x05471fff] [ 0.026554] ACPI: Early table checksum verification disabled [ 0.027307] ACPI: RSDP 0x00000000000FA1C0 000024 (v02 ACPIAM) [ 0.027315] ACPI: XSDT 0x00000000DFEA0100 00007C (v01 SMCI 20131125 MSFT 00000097) [ 0.027341] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.027374] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20240322/tbfadt-560) [ 0.027385] ACPI: DSDT 0x00000000DFEA0600 00562B (v01 1CF11 1CF11000 00000000 INTL 20051117) [ 0.027395] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.027404] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.027414] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.027424] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.027434] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.027444] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.027454] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.027464] ACPI: SSDT 0x00000000DFEAA6F0 000B9C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.027474] ACPI: EINJ 0x00000000DFEAB290 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.027484] ACPI: BERT 0x00000000DFEAB420 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.027493] ACPI: ERST 0x00000000DFEAB450 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.027503] ACPI: HEST 0x00000000DFEAB660 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.027508] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.027510] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c2a] [ 0.027512] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.027513] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.027514] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.027516] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.027517] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.027518] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.027519] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.027521] ACPI: Reserving SSDT table memory at [mem 0xdfeaa6f0-0xdfeab28b] [ 0.027522] ACPI: Reserving EINJ table memory at [mem 0xdfeab290-0xdfeab3bf] [ 0.027523] ACPI: Reserving BERT table memory at [mem 0xdfeab420-0xdfeab44f] [ 0.027524] ACPI: Reserving ERST table memory at [mem 0xdfeab450-0xdfeab65f] [ 0.027525] ACPI: Reserving HEST table memory at [mem 0xdfeab660-0xdfeab707] [ 0.027613] APIC: Switched APIC routing to: Xen PV [ 0.029942] Zone ranges: [ 0.029943] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.029946] DMA32 [mem 0x0000000001000000-0x00000000dfeb1fff] [ 0.029948] Normal empty [ 0.029949] Movable zone start for each node [ 0.029950] Early memory node ranges [ 0.029951] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.029953] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.029955] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.029963] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.030022] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.032428] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.032435] p2m virtual area at (____ptrval____), size is 40000000 [ 0.252504] Remapped 102 page(s) [ 0.253043] ACPI: PM-Timer IO Port: 0x808 [ 0.253067] CPU topo: CPU limit of 4 reached. Ignoring further CPUs [ 0.253090] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.253093] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.253112] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.253119] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.253129] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.253133] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.253151] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.253154] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.253165] CPU topo: Max. logical packages: 1 [ 0.253166] CPU topo: Max. logical dies: 1 [ 0.253167] CPU topo: Max. dies per package: 1 [ 0.253173] CPU topo: Max. threads per core: 1 [ 0.253175] CPU topo: Num. cores per package: 4 [ 0.253175] CPU topo: Num. threads per package: 4 [ 0.253176] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.253177] CPU topo: Rejected CPUs 4 [ 0.253192] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.253195] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.253196] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.253198] PM: hibernation: Registered nosave memory: [mem 0x20066000-0xdfe9dfff] [ 0.253199] PM: hibernation: Registered nosave memory: [mem 0xdfe9e000-0xdfe9ffff] [ 0.253200] PM: hibernation: Registered nosave memory: [mem 0xdfea0000-0xdfeb1fff] [ 0.253202] [mem 0x20066000-0xdfe9dfff] available for PCI devices [ 0.253206] Booting kernel on Xen [ 0.253207] Xen version: 4.20-unstable (preserve-AD) [ 0.253210] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.259511] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.260079] percpu: Embedded 57 pages/cpu s194200 r8192 d31080 u524288 [ 0.260087] pcpu-alloc: s194200 r8192 d31080 u524288 alloc=1*2097152 [ 0.260091] pcpu-alloc: [0] 0 1 2 3 [ 0.260148] xen: PV spinlocks enabled [ 0.260152] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.260155] Kernel command line: placeholder root=/dev/mapper/pinot1--vg-root ro console=hvc0 [ 0.260206] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.260329] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.260391] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.260573] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.260577] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.260579] software IO TLB: area num 4. [ 0.329986] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.332502] Dynamic Preempt: voluntary [ 0.332599] rcu: Preemptible hierarchical RCU implementation. [ 0.332601] rcu: RCU event tracing is enabled. [ 0.332601] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.332603] Trampoline variant of Tasks RCU enabled. [ 0.332604] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.332606] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.332621] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.339324] NR_IRQS: 4352, nr_irqs: 1000, preallocated irqs: 16 [ 0.339448] xen:events: Using FIFO-based ABI [ 0.339470] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.339479] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.339484] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.339490] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.339495] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.339500] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.339506] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.339511] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.339516] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.339521] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.339527] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.339532] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.339538] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.339543] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.339548] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.339557] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.345623] Console: colour VGA+ 80x25 [ 0.345626] printk: legacy console [tty0] enabled [ 0.359331] printk: legacy console [hvc0] enabled [ 0.360015] ACPI: Core revision 20240322 [ 0.364056] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.364214] Xen: using vcpuop timer interface [ 0.364220] installing Xen timer for CPU 0 [ 0.364466] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c480aba0, max_idle_ns: 440795211062 ns [ 0.364626] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.01 BogoMIPS (lpj=2800008) [ 0.364819] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.365051] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.365161] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.365277] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.365635] Spectre V2 : Mitigation: Retpolines [ 0.365738] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.365881] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.365990] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.366100] RETBleed: Mitigation: untrained return thunk [ 0.366206] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.366350] Speculative Store Bypass: Vulnerable [ 0.366499] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.366628] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.366737] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.366848] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.366956] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.390308] Freeing SMP alternatives memory: 40K [ 0.390430] pid_max: default: 32768 minimum: 301 [ 0.390560] LSM: initializing lsm=capability,selinux [ 0.390628] SELinux: Initializing. [ 0.390762] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.390905] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.391746] cpu 0 spinlock event irq 57 [ 0.391860] VPMU disabled by hypervisor. [ 0.392398] Performance Events: PMU not available due to virtualization, using software events only. [ 0.392630] signal: max sigframe size: 1776 [ 0.392810] rcu: Hierarchical SRCU implementation. [ 0.392919] rcu: Max phase no-delay instances is 400. [ 0.393144] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.398650] smp: Bringing up secondary CPUs ... [ 0.398946] installing Xen timer for CPU 1 [ 0.399327] installing Xen timer for CPU 2 [ 0.399690] installing Xen timer for CPU 3 [ 0.026062] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0011 [ 0.399920] cpu 1 spinlock event irq 77 [ 0.026062] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0012 [ 0.399953] cpu 2 spinlock event irq 78 [ 0.026062] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0013 [ 0.400674] cpu 3 spinlock event irq 79 [ 0.400948] smp: Brought up 1 node, 4 CPUs [ 0.401682] Memory: 381944K/524284K available (16384K kernel code, 2763K rwdata, 6196K rodata, 2688K init, 1808K bss, 138292K reserved, 0K cma-reserved) [ 0.401998] devtmpfs: initialized [ 0.401998] x86/mm: Memory block size: 128MB [ 0.402857] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.402858] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.403011] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.403226] PM: RTC time: 06:33:53, date: 2024-09-14 [ 0.403837] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.404014] xen:grant_table: Grant tables using version 1 layout [ 0.404135] Grant table initialized [ 0.404454] audit: initializing netlink subsys (disabled) [ 0.404661] audit: type=2000 audit(1726295633.529:1): state=initialized audit_enabled=0 res=1 [ 0.404759] thermal_sys: Registered thermal governor 'step_wise' [ 0.404759] thermal_sys: Registered thermal governor 'user_space' [ 0.404879] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.405769] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.486390] PCI: Using configuration type 1 for base access [ 0.486682] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.486845] ACPI: Added _OSI(Module Device) [ 0.486845] ACPI: Added _OSI(Processor Device) [ 0.486886] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.487629] ACPI: Added _OSI(Processor Aggregator Device) [ 0.492399] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.492940] xen: registering gsi 9 triggering 0 polarity 1 [ 0.493867] ACPI: Interpreter enabled [ 0.493990] ACPI: PM: (supports S0 S1 S4 S5) [ 0.494092] ACPI: Using IOAPIC for interrupt routing [ 0.494232] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.494384] PCI: Using E820 reservations for host bridge windows [ 0.494666] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.504639] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.504755] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.504907] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.505018] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.505159] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.505583] PCI host bridge to bus 0000:00 [ 0.505629] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.505746] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.505867] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.506008] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.506150] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.506292] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.506449] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.507007] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.507535] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.507698] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.507842] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.507955] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.508116] pci 0000:00:09.0: enabling Extended Tags [ 0.508342] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.508671] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.508884] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.509024] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.509138] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.509299] pci 0000:00:0a.0: enabling Extended Tags [ 0.509525] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.509864] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f conventional PCI endpoint [ 0.510052] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.510205] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.510332] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.510464] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.510592] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.510650] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.510815] pci 0000:00:11.0: set SATA to AHCI mode [ 0.511135] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.511350] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.511741] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.511929] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.512332] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.512555] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.512852] pci 0000:00:12.2: supports D1 D2 [ 0.512953] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.513222] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.513414] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.513839] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.514026] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.514432] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.514620] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.514977] pci 0000:00:13.2: supports D1 D2 [ 0.515079] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.515373] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.515892] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.516078] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.516233] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.516366] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.516496] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.516630] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.516790] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.516900] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.517008] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.517118] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.517421] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.517922] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.518158] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.518284] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.518410] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.518725] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.518911] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.519348] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.519707] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.520033] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.520352] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.520748] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.521058] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.521531] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.521678] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.521840] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.521972] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.522367] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.525671] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.525996] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.526234] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.526431] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.526568] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.526916] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.529671] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.529839] pci_bus 0000:03: extended config space not accessible [ 0.530008] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.530270] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.530410] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.530599] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.530757] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.531917] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.532085] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.532231] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.532375] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.532522] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.532627] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.532845] pci_bus 0000:00: on NUMA node 0 [ 0.533328] xen: registering gsi 13 triggering 1 polarity 0 [ 0.533846] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.534026] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.534201] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.534375] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.534615] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.534729] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.534914] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.535089] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.535302] xen:balloon: Initialising balloon driver [ 0.535637] iommu: Default domain type: Translated [ 0.535748] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.535923] SCSI subsystem initialized [ 0.536039] libata version 3.00 loaded. [ 0.536039] ACPI: bus type USB registered [ 0.536039] usbcore: registered new interface driver usbfs [ 0.536039] usbcore: registered new interface driver hub [ 0.536039] usbcore: registered new device driver usb [ 0.536149] pps_core: LinuxPPS API ver. 1 registered [ 0.536628] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.536779] PTP clock support registered [ 0.536905] Advanced Linux Sound Architecture Driver Initialized. [ 0.537039] NetLabel: Initializing [ 0.537137] NetLabel: domain hash size = 128 [ 0.537628] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.537754] NetLabel: unlabeled traffic allowed by default [ 0.537897] PCI: Using ACPI for IRQ routing [ 0.564615] PCI: pci_cache_line_size set to 64 bytes [ 0.564791] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.564794] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.564817] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.564817] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.564865] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.565010] vgaarb: loaded [ 0.567524] clocksource: Switched to clocksource tsc-early [ 0.567524] VFS: Disk quotas dquot_6.6.0 [ 0.567524] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.567524] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.567524] pnp: PnP ACPI init [ 0.567683] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.567747] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.567747] xen: registering gsi 8 triggering 1 polarity 0 [ 0.567747] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.568913] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.569034] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.569481] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.569597] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.569737] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.569852] system 00:05: [io 0x040b] has been reserved [ 0.569963] system 00:05: [io 0x04d6] has been reserved [ 0.570075] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.570190] system 00:05: [io 0x0c14] has been reserved [ 0.570301] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.570415] system 00:05: [io 0x0c52] has been reserved [ 0.570528] system 00:05: [io 0x0c6c] has been reserved [ 0.570649] system 00:05: [io 0x0c6f] has been reserved [ 0.570774] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.570915] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.571030] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.571144] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.571258] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.571373] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.571487] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.571602] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.571726] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.571841] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.571955] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.572070] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.572253] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.572370] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.572755] xen: registering gsi 4 triggering 1 polarity 0 [ 0.572759] Already setup the GSI :4 [ 0.572863] pnp 00:06: [dma 0 disabled] [ 0.573175] xen: registering gsi 3 triggering 1 polarity 0 [ 0.573185] pnp 00:07: [dma 0 disabled] [ 0.573348] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.573766] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.573959] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.574079] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.574198] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.574316] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.574616] pnp: PnP ACPI: found 10 devices [ 0.597240] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.597386] NET: Registered PF_INET protocol family [ 0.597551] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.597975] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.598130] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.598280] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.598437] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.598621] TCP: Hash tables configured (established 4096 bind 4096) [ 0.598793] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.598935] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.599119] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.599399] RPC: Registered named UNIX socket transport module. [ 0.599513] RPC: Registered udp transport module. [ 0.599622] RPC: Registered tcp transport module. [ 0.599739] RPC: Registered tcp-with-tls transport module. [ 0.599857] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.600498] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.600614] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.600752] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.600888] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.601001] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.601125] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.601271] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.601392] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.601543] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.601714] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.601830] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.601946] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.602064] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.602182] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.602300] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.602412] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.602528] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.602689] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.602805] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.602920] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.603036] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.603151] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.603265] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.603382] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.603499] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.603774] xen: registering gsi 16 triggering 0 polarity 1 [ 0.603799] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.266773] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 647527 usecs [ 1.267015] xen: registering gsi 16 triggering 0 polarity 1 [ 1.267024] Already setup the GSI :16 [ 1.290773] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 23261 usecs [ 1.291016] xen: registering gsi 17 triggering 0 polarity 1 [ 1.291060] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.291246] xen: registering gsi 18 triggering 0 polarity 1 [ 1.291266] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.314774] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 23033 usecs [ 1.315034] xen: registering gsi 18 triggering 0 polarity 1 [ 1.315042] Already setup the GSI :18 [ 1.338774] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 23242 usecs [ 1.339018] xen: registering gsi 19 triggering 0 polarity 1 [ 1.339059] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.339268] xen: registering gsi 18 triggering 0 polarity 1 [ 1.339272] Already setup the GSI :18 [ 1.362773] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 23010 usecs [ 1.362998] PCI: CLS 64 bytes, default 64 [ 1.363145] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.363261] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 1.363309] Unpacking initramfs... [ 1.363453] kvm_intel: VMX not supported by CPU 0 [ 1.363649] kvm_amd: SVM not supported by CPU 0 [ 1.363786] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c480aba0, max_idle_ns: 440795211062 ns [ 1.368059] clocksource: Switched to clocksource tsc [ 1.440680] Initialise system trusted keyrings [ 1.440987] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.441404] NFS: Registering the id_resolver key type [ 1.441533] Key type id_resolver registered [ 1.441680] Key type id_legacy registered [ 1.441889] 9p: Installing v9fs 9p2000 file system support [ 1.462866] Key type asymmetric registered [ 1.462988] Asymmetric key parser 'x509' registered [ 1.463145] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.463312] io scheduler mq-deadline registered [ 1.463422] io scheduler kyber registered [ 1.464181] xen: registering gsi 53 triggering 0 polarity 1 [ 1.464217] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.464490] xen: registering gsi 54 triggering 0 polarity 1 [ 1.464507] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.464836] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.465016] ACPI: button: Power Button [PWRB] [ 1.465202] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.465603] ACPI: button: Power Button [PWRF] [ 1.467883] ACPI: \_PR_.P001: Found 2 idle states [ 1.468160] ACPI: \_PR_.P002: Found 2 idle states [ 1.468359] ACPI: \_PR_.P003: Found 2 idle states [ 1.468624] ACPI: \_PR_.P004: Found 2 idle states [ 1.470873] xen:xen_evtchn: Event-channel device installed [ 1.471098] xen_pciback: backend is vpci [ 1.471910] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.472319] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.473107] hpet_acpi_add: no address or irqs in _CRS [ 1.473280] Non-volatile memory driver v1.3 [ 1.478151] loop: module loaded [ 1.484353] ahci 0000:00:11.0: version 3.0 [ 1.484488] xen: registering gsi 22 triggering 0 polarity 1 [ 1.484516] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.484687] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.484836] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.484945] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.486211] scsi host0: ahci [ 1.486518] scsi host1: ahci [ 1.486813] scsi host2: ahci [ 1.487161] scsi host3: ahci [ 1.487353] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 4 [ 1.487499] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 4 [ 1.487642] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 4 [ 1.487785] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 4 [ 1.488373] tun: Universal TUN/TAP device driver, 1.6 [ 1.488622] e100: Intel(R) PRO/100 Network Driver [ 1.488726] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.488844] sky2: driver version 1.30 [ 1.488995] xen_netfront: Initialising Xen virtual ethernet driver [ 1.489358] xen: registering gsi 16 triggering 0 polarity 1 [ 1.489365] Already setup the GSI :16 [ 1.489541] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.489638] xen: registering gsi 19 triggering 0 polarity 1 [ 1.489661] Already setup the GSI :19 [ 1.489666] xen: registering gsi 17 triggering 0 polarity 1 [ 1.489671] Already setup the GSI :17 [ 1.489711] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.489811] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.525066] Freeing initrd memory: 20936K [ 1.546277] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.546431] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.546572] usb usb1: Product: OHCI PCI host controller [ 1.546677] usb usb1: Manufacturer: Linux 6.11.0-rc7+ ohci_hcd [ 1.546783] usb usb1: SerialNumber: 0000:00:12.0 [ 1.547120] hub 1-0:1.0: USB hub found [ 1.547234] hub 1-0:1.0: 3 ports detected [ 1.547603] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.547666] xen: registering gsi 16 triggering 0 polarity 1 [ 1.547725] Already setup the GSI :16 [ 1.547820] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.547972] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.548257] ehci-pci 0000:00:13.2: debug port 1 [ 1.548470] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 1.555239] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.555450] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 1.555621] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.555761] usb usb2: Product: EHCI Host Controller [ 1.555864] usb usb2: Manufacturer: Linux 6.11.0-rc7+ ehci_hcd [ 1.555971] usb usb2: SerialNumber: 0000:00:13.2 [ 1.556293] hub 2-0:1.0: USB hub found [ 1.556405] hub 2-0:1.0: 6 ports detected [ 1.615275] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.615503] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3 [ 1.615647] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.615812] ehci-pci 0000:00:12.2: debug port 1 [ 1.616003] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.623113] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.623298] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 1.623443] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.623583] usb usb3: Product: EHCI Host Controller [ 1.623686] usb usb3: Manufacturer: Linux 6.11.0-rc7+ ehci_hcd [ 1.623792] usb usb3: SerialNumber: 0000:00:12.2 [ 1.624092] hub 3-0:1.0: USB hub found [ 1.624202] hub 3-0:1.0: 6 ports detected [ 1.676143] hub 1-0:1.0: USB hub found [ 1.676262] hub 1-0:1.0: 3 ports detected [ 1.676515] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.676767] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.676948] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 1.732180] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.732332] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.732472] usb usb4: Product: OHCI PCI host controller [ 1.732577] usb usb4: Manufacturer: Linux 6.11.0-rc7+ ohci_hcd [ 1.732750] usb usb4: SerialNumber: 0000:00:12.1 [ 1.733016] hub 4-0:1.0: USB hub found [ 1.733182] hub 4-0:1.0: 3 ports detected [ 1.733588] xen: registering gsi 18 triggering 0 polarity 1 [ 1.733593] Already setup the GSI :18 [ 1.733728] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.733945] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.734181] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 1.790210] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.790362] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.790502] usb usb5: Product: OHCI PCI host controller [ 1.790607] usb usb5: Manufacturer: Linux 6.11.0-rc7+ ohci_hcd [ 1.790714] usb usb5: SerialNumber: 0000:00:13.0 [ 1.791021] hub 5-0:1.0: USB hub found [ 1.791145] hub 5-0:1.0: 3 ports detected [ 1.791504] xen: registering gsi 18 triggering 0 polarity 1 [ 1.791510] Already setup the GSI :18 [ 1.791645] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.791819] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.791993] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 1.794273] ata4: SATA link down (SStatus 0 SControl 300) [ 1.794451] ata3: SATA link down (SStatus 0 SControl 300) [ 1.848197] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.848349] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.848489] usb usb6: Product: OHCI PCI host controller [ 1.848593] usb usb6: Manufacturer: Linux 6.11.0-rc7+ ohci_hcd [ 1.848714] usb usb6: SerialNumber: 0000:00:13.1 [ 1.848993] hub 6-0:1.0: USB hub found [ 1.849119] hub 6-0:1.0: 3 ports detected [ 1.849527] xen: registering gsi 18 triggering 0 polarity 1 [ 1.849532] Already setup the GSI :18 [ 1.849667] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.849860] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.850053] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 1.906186] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.906335] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.906474] usb usb7: Product: OHCI PCI host controller [ 1.906578] usb usb7: Manufacturer: Linux 6.11.0-rc7+ ohci_hcd [ 1.906685] usb usb7: SerialNumber: 0000:00:14.5 [ 1.906990] hub 7-0:1.0: USB hub found [ 1.907115] hub 7-0:1.0: 2 ports detected [ 1.907483] usbcore: registered new interface driver usblp [ 1.907614] usbcore: registered new interface driver usb-storage [ 1.907828] i8042: PNP: No PS/2 controller found. [ 1.907930] i8042: Probing ports directly. [ 1.910996] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.911113] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.911471] rtc_cmos 00:02: RTC can wake from S4 [ 1.911983] rtc_cmos 00:02: registered as rtc0 [ 1.912145] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 1.912327] device-mapper: uevent: version 1.0.3 [ 1.912507] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 1.912664] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.912820] hid: raw HID events driver (C) Jiri Kosina [ 1.913233] usbcore: registered new interface driver usbhid [ 1.913342] usbhid: USB HID core driver [ 1.913939] Initializing XFRM netlink socket [ 1.914057] NET: Registered PF_INET6 protocol family [ 1.914736] Segment Routing with IPv6 [ 1.914854] In-situ OAM (IOAM) with IPv6 [ 1.914994] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.915309] NET: Registered PF_PACKET protocol family [ 1.915444] 9pnet: Installing 9P2000 support [ 1.915564] Key type dns_resolver registered [ 1.915704] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.916251] IPI shorthand broadcast: enabled [ 1.920949] sched_clock: Marking stable (1895003660, 25062716)->(1926719455, -6653079) [ 1.921437] registered taskstats version 1 [ 1.921541] Loading compiled-in X.509 certificates [ 1.923773] PM: Magic number: 8:733:569 [ 1.923931] printk: legacy console [netcon0] enabled [ 1.924086] netconsole: network logging started [ 1.924357] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.934711] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.935118] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 1.936834] ALSA device list: [ 1.936931] No soundcards found. [ 1.937724] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 1.949133] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.949277] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.949781] ata2.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133 [ 1.950289] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.950739] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 1.951097] ata2.00: configured for UDMA/133 [ 1.951298] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.953004] ata1.00: configured for UDMA/133 [ 1.963396] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 1.963986] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.964055] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.964319] sd 0:0:0:0: [sda] Write Protect is off [ 1.964462] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.964495] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.964541] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5 [ 1.964802] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.965349] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.965368] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.965627] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 1.965764] sd 1:0:0:0: [sdb] Write Protect is off [ 1.965870] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.965892] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.966145] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 2.004631] sda: sda1 sda2 < sda5 > [ 2.004988] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.017912] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.019537] Freeing unused kernel image (initmem) memory: 2688K [ 2.019672] Write protecting the kernel read-only data: 24576k [ 2.032103] Freeing unused kernel image (rodata/data gap) memory: 1996K [ 2.092093] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.149542] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.149660] Run /init as init process [ 2.149758] with arguments: [ 2.149760] /init [ 2.149761] placeholder [ 2.149762] with environment: [ 2.149763] HOME=/ [ 2.149765] TERM=linux [ 2.257158] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.257327] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.257452] usb 6-2: Product: Hermon USB hidmouse Device [ 2.257567] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.263762] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.264127] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.267892] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.417274] e1000e: Intel(R) PRO/1000 Network Driver [ 2.417402] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.417815] xen: registering gsi 48 triggering 0 polarity 1 [ 2.417851] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.418117] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.456327] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.465898] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.510177] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e9:2a [ 2.510424] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.510670] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.510981] xen: registering gsi 47 triggering 0 polarity 1 [ 2.511014] xen: --> pirq=47 -> irq=47 (gsi=47) [ 2.511222] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.558179] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.603022] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e9:2b [ 2.603185] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.603375] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.605386] e1000e 0000:01:00.0 enx002590aee92a: renamed from eth0 [ 2.606719] e1000e 0000:02:00.0 enx002590aee92b: renamed from eth1 [ 2.614157] random: crng init done [ 3.285677] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.296413] EXT4-fs (dm-0): mounted filesystem 56ddcd27-94d8-44e6-b378-6cfe133fa4db ro with ordered data mode. Quota mode: none. [ 7.558229] EXT4-fs (dm-0): re-mounted 56ddcd27-94d8-44e6-b378-6cfe133fa4db r/w. Quota mode: none. [ 9.008536] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.032571] EXT4-fs (sda1): mounted filesystem 272b1030-8842-4af9-90db-d76abae2e6d1 r/w with ordered data mode. Quota mode: none. [ 9.106371] Adding 1949692k swap on /dev/mapper/pinot1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 10.633907] xenbr0: port 1(enx002590aee92a) entered blocking state [ 10.634107] xenbr0: port 1(enx002590aee92a) entered disabled state [ 10.634258] e1000e 0000:01:00.0 enx002590aee92a: entered allmulticast mode [ 10.634420] e1000e 0000:01:00.0 enx002590aee92a: entered promiscuous mode [ 13.788138] e1000e 0000:01:00.0 enx002590aee92a: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 13.788492] xenbr0: port 1(enx002590aee92a) entered blocking state [ 13.788639] xenbr0: port 1(enx002590aee92a) entered forwarding state