[ 0.000000] Linux version 6.1.110+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Fri Sep 13 21:24:17 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000460] tsc: Detected 2199.998 MHz processor [ 0.000900] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000904] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000910] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000912] Disabled [ 0.000913] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000917] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000956] Kernel/User page tables isolation: disabled on XEN PV. [ 0.028256] RAMDISK: [mem 0x04000000-0x05424fff] [ 0.028264] ACPI: Early table checksum verification disabled [ 0.028873] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028885] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028924] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028973] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028990] ACPI: FACS 0x0000000079E59F80 000040 [ 0.029006] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.029022] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.029039] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.029055] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.029071] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.029087] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.029104] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.029120] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.029136] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.029153] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.029169] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.029185] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.029201] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.029217] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.029234] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.029250] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.029266] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.029275] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.029276] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.029277] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.029278] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.029279] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.029280] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.029281] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.029282] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.029283] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.029284] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.029285] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.029286] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.029287] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.029288] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.029289] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.029290] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.029291] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.029292] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.029293] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.029294] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.029340] Setting APIC routing to Xen PV. [ 0.033388] Zone ranges: [ 0.033389] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.033391] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.033393] Normal empty [ 0.033394] Movable zone start for each node [ 0.033395] Early memory node ranges [ 0.033396] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.033397] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.033399] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.033404] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.033439] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034989] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034994] p2m virtual area at (____ptrval____), size is 40000000 [ 0.222580] Remapped 102 page(s) [ 0.224010] ACPI: PM-Timer IO Port: 0x408 [ 0.224063] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.224066] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.224068] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.224069] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.224071] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.224072] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.224074] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.224075] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.224104] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.224117] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.224120] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.224146] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.224151] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.224221] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.224236] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.224238] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.224239] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.224241] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.224251] Booting kernel on Xen [ 0.224252] Xen version: 4.20-unstable (preserve-AD) [ 0.224255] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.230518] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.230801] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.230807] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.230810] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230894] xen: PV spinlocks enabled [ 0.230897] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230902] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230904] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230940] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230950] random: crng init done [ 0.230999] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.231024] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.232365] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.232367] software IO TLB: area num 8. [ 0.292252] Memory: 389288K/524284K available (14349K kernel code, 2686K rwdata, 4584K rodata, 1580K init, 1288K bss, 134744K reserved, 0K cma-reserved) [ 0.292421] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.294925] Dynamic Preempt: voluntary [ 0.295024] rcu: Preemptible hierarchical RCU implementation. [ 0.295025] rcu: RCU event tracing is enabled. [ 0.295026] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.295027] Trampoline variant of Tasks RCU enabled. [ 0.295028] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.295029] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.305622] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.305746] xen:events: Using FIFO-based ABI [ 0.305777] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.305786] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.305794] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.305802] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.305809] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.305817] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.305824] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.305832] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.305839] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.305847] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.305855] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.305862] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.305870] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.305878] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.305887] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.305898] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.311279] Console: colour VGA+ 80x25 [ 0.326171] printk: console [tty0] enabled [ 0.327506] printk: console [hvc0] enabled [ 0.327645] ACPI: Core revision 20220331 [ 0.343135] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.343303] Xen: using vcpuop timer interface [ 0.343311] installing Xen timer for CPU 0 [ 0.343462] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.343623] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199998) [ 0.343953] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.344071] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.344200] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.344350] Spectre V2 : Mitigation: Retpolines [ 0.344629] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.344777] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.344897] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.345019] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.345168] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.345288] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.345441] MDS: Mitigation: Clear CPU buffers [ 0.345555] TAA: Mitigation: Clear CPU buffers [ 0.345627] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.345794] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.345946] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.346076] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.346197] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.346317] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.363939] Freeing SMP alternatives memory: 40K [ 0.364066] pid_max: default: 32768 minimum: 301 [ 0.364643] LSM: Security Framework initializing [ 0.364767] SELinux: Initializing. [ 0.364906] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.365087] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.365715] cpu 0 spinlock event irq 25 [ 0.365836] VPMU disabled by hypervisor. [ 0.366278] cblist_init_generic: Setting adjustable number of callback queues. [ 0.366425] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.366582] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.366627] signal: max sigframe size: 1776 [ 0.366792] rcu: Hierarchical SRCU implementation. [ 0.366908] rcu: Max phase no-delay instances is 400. [ 0.367406] smp: Bringing up secondary CPUs ... [ 0.367746] installing Xen timer for CPU 1 [ 0.368228] cpu 1 spinlock event irq 35 [ 0.368767] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.368937] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.369131] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.369850] installing Xen timer for CPU 2 [ 0.370326] cpu 2 spinlock event irq 41 [ 0.370737] installing Xen timer for CPU 3 [ 0.371186] cpu 3 spinlock event irq 47 [ 0.371186] installing Xen timer for CPU 4 [ 0.371961] cpu 4 spinlock event irq 53 [ 0.371961] installing Xen timer for CPU 5 [ 0.372795] cpu 5 spinlock event irq 59 [ 0.372833] installing Xen timer for CPU 6 [ 0.373678] cpu 6 spinlock event irq 65 [ 0.373882] installing Xen timer for CPU 7 [ 0.374299] cpu 7 spinlock event irq 71 [ 0.374867] smp: Brought up 1 node, 8 CPUs [ 0.374986] smpboot: Max logical packages: 1 [ 0.375204] devtmpfs: initialized [ 0.375204] x86/mm: Memory block size: 128MB [ 0.375854] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.375906] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.376063] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.376319] PM: RTC time: 08:57:17, date: 2024-09-14 [ 0.376886] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.377035] xen:grant_table: Grant tables using version 1 layout [ 0.377179] Grant table initialized [ 0.377481] audit: initializing netlink subsys (disabled) [ 0.377646] audit: type=2000 audit(1726304237.562:1): state=initialized audit_enabled=0 res=1 [ 0.377705] thermal_sys: Registered thermal governor 'step_wise' [ 0.377705] thermal_sys: Registered thermal governor 'user_space' [ 0.377824] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.378254] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.378629] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.507595] PCI: Using configuration type 1 for base access [ 0.510208] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.510683] ACPI: Added _OSI(Module Device) [ 0.510787] ACPI: Added _OSI(Processor Device) [ 0.510902] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.510902] ACPI: Added _OSI(Processor Aggregator Device) [ 0.540637] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.542632] xen: registering gsi 9 triggering 0 polarity 0 [ 0.545610] ACPI: Dynamic OEM Table Load: [ 0.553745] ACPI: Interpreter enabled [ 0.553880] ACPI: PM: (supports S0 S4 S5) [ 0.553993] ACPI: Using IOAPIC for interrupt routing [ 0.554140] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.554292] PCI: Using E820 reservations for host bridge windows [ 0.554621] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.580481] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.580612] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.580853] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.581146] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.581268] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.581445] PCI host bridge to bus 0000:ff [ 0.581559] pci_bus 0000:ff: root bus resource [bus ff] [ 0.581707] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.582375] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.582812] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.583452] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.583919] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.584352] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.584787] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.585247] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.585707] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.586177] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.586646] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.587275] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.587733] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.588179] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.588626] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.589066] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.589533] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.589945] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.590388] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.590896] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.591560] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.592016] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.592495] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.592974] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.593482] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.593954] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.594389] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.594861] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.595572] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.596016] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.596503] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.596977] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.597441] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.598089] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.598525] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.599149] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.599630] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.600163] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.600660] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.601216] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.601860] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.602330] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.602964] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.603397] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.603875] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.604790] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.605238] pci_bus 0000:ff: on NUMA node 0 [ 0.609685] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.609829] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.610150] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.610496] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.610617] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.611116] PCI host bridge to bus 0000:00 [ 0.611232] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.611387] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.611508] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.611626] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.611772] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.611957] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.612615] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.613177] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.613552] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.614066] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.614463] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.615001] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.615370] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.615923] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.616307] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.616877] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.617274] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.617813] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.618230] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.618828] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.619470] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.620195] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.620417] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.620919] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.621271] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.621493] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.621967] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.622303] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.622525] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.622979] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.623345] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.623545] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.624054] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.624379] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.624973] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.625189] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.625314] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.632819] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.633391] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.633590] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.633634] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.633931] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.634533] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.634705] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.634828] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.635119] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.635718] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.635917] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.636040] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.636370] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.636570] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.637082] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.637409] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.638210] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.638407] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.638568] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.638668] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.638828] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.638987] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.639147] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.639491] pci 0000:00:1f.2: PME# supported from D3hot [ 0.639778] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.639999] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.640249] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.640636] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.640888] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.641626] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.641928] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.642296] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.642512] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.643276] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.643520] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.644239] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.644456] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.645213] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.645430] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.646148] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.646316] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.646667] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.646884] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.647175] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.647361] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.647746] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.647973] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.648095] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.648302] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.648424] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.649040] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.649258] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.649548] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.649667] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.650025] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.650231] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.650393] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.650600] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.650625] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.651197] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.651333] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.651473] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.651777] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.652078] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.652449] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.652570] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.652715] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.652968] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.653136] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.653686] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.654160] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.654312] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.654442] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.654806] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.654927] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.655136] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.655356] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.655523] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.656048] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.656520] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.656636] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.656765] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.657139] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.657541] pci 0000:09:00.0: enabling Extended Tags [ 0.657858] pci 0000:09:00.0: supports D1 D2 [ 0.657972] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.658354] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.658482] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.658612] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.658814] pci_bus 0000:0a: extended config space not accessible [ 0.658987] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.659196] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.659365] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.659561] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.659871] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.660167] pci 0000:0a:00.0: supports D1 D2 [ 0.660281] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.660726] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.660897] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.661029] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.661426] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.661633] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.661846] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.662009] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.662563] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.662744] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.662890] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.663112] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.663257] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.663857] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.664062] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.664275] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.664439] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.664992] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.665226] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.665371] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.665592] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.665625] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.666154] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.666392] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.666604] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.666672] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.667196] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.667429] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.667614] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.667832] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.667977] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.668506] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.668709] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.668955] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.669119] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.669641] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.669875] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.670021] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.670270] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.670415] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.671009] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.671137] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.671266] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.671407] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.671918] pci_bus 0000:00: on NUMA node 0 [ 0.672012] xen: registering gsi 13 triggering 1 polarity 0 [ 0.673014] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.673213] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.673406] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.673598] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.673702] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.673822] ACPI: PCI: Interrupt link LNKE disabled [ 0.674009] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.674129] ACPI: PCI: Interrupt link LNKF disabled [ 0.674345] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.674464] ACPI: PCI: Interrupt link LNKG disabled [ 0.674656] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.674776] ACPI: PCI: Interrupt link LNKH disabled [ 0.675042] xen:balloon: Initialising balloon driver [ 0.675716] iommu: Default domain type: Translated [ 0.682630] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.682817] SCSI subsystem initialized [ 0.683662] libata version 3.00 loaded. [ 0.683663] ACPI: bus type USB registered [ 0.683791] usbcore: registered new interface driver usbfs [ 0.683947] usbcore: registered new interface driver hub [ 0.684069] usbcore: registered new device driver usb [ 0.684069] pps_core: LinuxPPS API ver. 1 registered [ 0.684069] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.684069] PTP clock support registered [ 0.684669] Advanced Linux Sound Architecture Driver Initialized. [ 0.684918] NetLabel: Initializing [ 0.685031] NetLabel: domain hash size = 128 [ 0.685633] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.685780] NetLabel: unlabeled traffic allowed by default [ 0.685920] PCI: Using ACPI for IRQ routing [ 0.722454] PCI: pci_cache_line_size set to 64 bytes [ 0.723261] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.723264] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.723664] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.723786] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.723938] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.723938] vgaarb: loaded [ 0.725625] clocksource: Switched to clocksource tsc-early [ 0.725880] VFS: Disk quotas dquot_6.6.0 [ 0.726004] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.726150] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.726337] pnp: PnP ACPI init [ 0.726822] xen: registering gsi 8 triggering 1 polarity 0 [ 0.727018] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.727145] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.727265] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.727384] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.727503] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.727660] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.727796] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.727920] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.728041] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.728162] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.728283] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.728404] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.728524] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.728950] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.729099] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.729219] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.729337] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.729456] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.729903] xen: registering gsi 4 triggering 1 polarity 0 [ 0.729909] Already setup the GSI :4 [ 0.730023] pnp 00:03: [dma 0 disabled] [ 0.730336] xen: registering gsi 3 triggering 1 polarity 0 [ 0.730347] pnp 00:04: [dma 0 disabled] [ 0.730978] pnp: PnP ACPI: found 5 devices [ 0.762351] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.762512] NET: Registered PF_INET protocol family [ 0.762690] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.763056] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.763208] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.763356] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.763508] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.763702] TCP: Hash tables configured (established 4096 bind 4096) [ 0.763879] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.764029] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.764183] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.764554] RPC: Registered named UNIX socket transport module. [ 0.764695] RPC: Registered udp transport module. [ 0.764810] RPC: Registered tcp transport module. [ 0.764923] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.765442] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.765616] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.765802] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.765965] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.766113] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.766291] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.766466] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.766641] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.766806] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.766930] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.767076] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.767220] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.767366] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.767489] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.767642] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.767799] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.767954] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.768077] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.768222] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.768366] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.768512] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.768648] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.768810] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.768956] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.769102] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.769238] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.769395] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.769568] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.769767] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.769945] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.770065] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.770205] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.770368] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.770487] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.770638] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.770828] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.770951] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.771093] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.771260] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.771381] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.771520] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.771717] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.771879] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.772038] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.772198] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.772352] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.772505] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.772678] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.772849] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.773005] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.773125] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.773265] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.773401] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.773596] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.773761] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.773882] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.774001] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.774122] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.774243] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.774363] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.774482] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.774634] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.774761] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.774909] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.775029] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.775149] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.775265] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.775385] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.775501] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.775632] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.775758] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.775880] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.776435] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.776683] xen: registering gsi 19 triggering 0 polarity 1 [ 0.776718] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.785585] xen: registering gsi 18 triggering 0 polarity 1 [ 0.785605] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.801907] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 15991 usecs [ 0.802155] xen: registering gsi 18 triggering 0 polarity 1 [ 0.802161] Already setup the GSI :18 [ 0.818845] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 16353 usecs [ 0.819067] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.819243] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.819323] Unpacking initramfs... [ 0.819364] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.819730] kvm: no hardware support for 'kvm_intel' [ 0.827638] has_svm: not amd or hygon [ 0.827765] kvm: no hardware support for 'kvm_amd' [ 0.827884] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.828132] clocksource: Switched to clocksource tsc [ 0.830999] Initialise system trusted keyrings [ 0.831313] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.832933] NFS: Registering the id_resolver key type [ 0.833062] Key type id_resolver registered [ 0.833175] Key type id_legacy registered [ 0.833381] 9p: Installing v9fs 9p2000 file system support [ 0.847620] Key type asymmetric registered [ 0.847757] Asymmetric key parser 'x509' registered [ 0.847896] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.848054] io scheduler mq-deadline registered [ 0.848176] io scheduler kyber registered [ 0.849034] xen: registering gsi 16 triggering 0 polarity 1 [ 0.849062] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.849608] xen: registering gsi 16 triggering 0 polarity 1 [ 0.849614] Already setup the GSI :16 [ 0.850273] xen: registering gsi 16 triggering 0 polarity 1 [ 0.850279] Already setup the GSI :16 [ 0.850606] xen: registering gsi 16 triggering 0 polarity 1 [ 0.850611] Already setup the GSI :16 [ 0.850956] xen: registering gsi 16 triggering 0 polarity 1 [ 0.850960] Already setup the GSI :16 [ 0.851546] xen: registering gsi 16 triggering 0 polarity 1 [ 0.851551] Already setup the GSI :16 [ 0.852145] xen: registering gsi 16 triggering 0 polarity 1 [ 0.852151] Already setup the GSI :16 [ 0.852605] xen: registering gsi 17 triggering 0 polarity 1 [ 0.852621] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.852978] xen: registering gsi 19 triggering 0 polarity 1 [ 0.852984] Already setup the GSI :19 [ 0.853430] xen: registering gsi 16 triggering 0 polarity 1 [ 0.853435] Already setup the GSI :16 [ 0.854132] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.854309] ACPI: button: Power Button [PWRB] [ 0.854456] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.854700] ACPI: button: Power Button [PWRF] [ 0.854994] Monitor-Mwait will be used to enter C-1 state [ 0.855030] Monitor-Mwait will be used to enter C-2 state [ 0.855046] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.855447] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.855853] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.856235] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.856574] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.857084] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.857440] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.857996] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.858826] xen:xen_evtchn: Event-channel device installed [ 0.859041] xen_pciback: backend is vpci [ 0.859748] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.860058] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.860807] hpet_acpi_add: no address or irqs in _CRS [ 0.860998] Non-volatile memory driver v1.3 [ 0.861113] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.863858] loop: module loaded [ 0.870387] ahci 0000:00:1f.2: version 3.0 [ 0.870489] xen: registering gsi 16 triggering 0 polarity 1 [ 0.870499] Already setup the GSI :16 [ 0.870849] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.871001] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.886337] scsi host0: ahci [ 0.886784] scsi host1: ahci [ 0.887263] scsi host2: ahci [ 0.887687] scsi host3: ahci [ 0.888062] scsi host4: ahci [ 0.888386] scsi host5: ahci [ 0.888531] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 0.888679] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 0.888840] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 0.888986] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 0.889131] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 0.889276] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 0.889711] tun: Universal TUN/TAP device driver, 1.6 [ 0.889999] e100: Intel(R) PRO/100 Network Driver [ 0.890140] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.890286] sky2: driver version 1.30 [ 0.890475] xen_netfront: Initialising Xen virtual ethernet driver [ 0.890853] xen: registering gsi 18 triggering 0 polarity 1 [ 0.890863] Already setup the GSI :18 [ 0.891081] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.891272] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.891451] ehci-pci 0000:00:1a.0: debug port 2 [ 0.895590] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.901774] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.901998] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.902151] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.902314] usb usb1: Product: EHCI Host Controller [ 0.902429] usb usb1: Manufacturer: Linux 6.1.110+ ehci_hcd [ 0.902546] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.902841] hub 1-0:1.0: USB hub found [ 0.902967] hub 1-0:1.0: 2 ports detected [ 0.903333] xen: registering gsi 18 triggering 0 polarity 1 [ 0.903343] Already setup the GSI :18 [ 0.903539] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.903739] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.903917] ehci-pci 0000:00:1d.0: debug port 2 [ 0.908026] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.914778] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.914998] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.915147] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.915292] usb usb2: Product: EHCI Host Controller [ 0.915408] usb usb2: Manufacturer: Linux 6.1.110+ ehci_hcd [ 0.915524] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.915804] hub 2-0:1.0: USB hub found [ 0.915930] hub 2-0:1.0: 2 ports detected [ 0.916378] xen: registering gsi 19 triggering 0 polarity 1 [ 0.916388] Already setup the GSI :19 [ 0.916597] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.916795] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.918011] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.918480] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.918677] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.918841] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.919048] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.919197] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.919342] usb usb3: Product: xHCI Host Controller [ 0.919457] usb usb3: Manufacturer: Linux 6.1.110+ xhci-hcd [ 0.919574] usb usb3: SerialNumber: 0000:00:14.0 [ 0.919873] hub 3-0:1.0: USB hub found [ 0.920006] hub 3-0:1.0: 8 ports detected [ 0.921181] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.921335] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.921480] usb usb4: Product: xHCI Host Controller [ 0.921603] usb usb4: Manufacturer: Linux 6.1.110+ xhci-hcd [ 0.921733] usb usb4: SerialNumber: 0000:00:14.0 [ 0.921979] hub 4-0:1.0: USB hub found [ 0.922112] hub 4-0:1.0: 6 ports detected [ 0.923320] usbcore: registered new interface driver usblp [ 0.923468] usbcore: registered new interface driver usb-storage [ 0.924952] Freeing initrd memory: 20628K [ 0.925209] i8042: PNP: No PS/2 controller found. [ 0.925538] rtc_cmos 00:00: RTC can wake from S4 [ 0.926230] rtc_cmos 00:00: registered as rtc0 [ 0.926388] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.926595] device-mapper: uevent: version 1.0.3 [ 0.926713] xen: registering gsi 18 triggering 0 polarity 1 [ 0.926740] Already setup the GSI :18 [ 0.926853] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.926893] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.927010] intel_pstate: CPU model not supported [ 0.927042] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.927150] hid: raw HID events driver (C) Jiri Kosina [ 0.927611] usbcore: registered new interface driver usbhid [ 0.927687] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.927744] usbhid: USB HID core driver [ 0.928404] Initializing XFRM netlink socket [ 0.928648] NET: Registered PF_INET6 protocol family [ 0.929196] Segment Routing with IPv6 [ 0.929316] In-situ OAM (IOAM) with IPv6 [ 0.929458] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.929695] NET: Registered PF_PACKET protocol family [ 0.929867] 9pnet: Installing 9P2000 support [ 0.930012] Key type dns_resolver registered [ 0.930809] IPI shorthand broadcast: enabled [ 0.930950] sched_clock: Marking stable (893049311, 37720133)->(1778608530, -847839086) [ 0.931533] registered taskstats version 1 [ 0.931651] Loading compiled-in X.509 certificates [ 0.934250] PM: Magic number: 8:360:978 [ 0.934481] printk: console [netcon0] enabled [ 0.934597] netconsole: network logging started [ 0.934955] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.947259] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.947600] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.947820] ALSA device list: [ 0.947980] No soundcards found. [ 0.948273] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 1.144772] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.152804] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.160821] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.198014] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.198155] ata4: SATA link down (SStatus 0 SControl 300) [ 1.198314] ata1: SATA link down (SStatus 0 SControl 300) [ 1.198455] ata5: SATA link down (SStatus 0 SControl 300) [ 1.198594] ata2: SATA link down (SStatus 0 SControl 300) [ 1.198768] ata6: SATA link down (SStatus 0 SControl 300) [ 1.199202] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.281157] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.281312] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.281478] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.281627] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.281936] hub 2-1:1.0: USB hub found [ 1.282077] hub 1-1:1.0: USB hub found [ 1.282209] hub 2-1:1.0: 4 ports detected [ 1.282328] hub 1-1:1.0: 4 ports detected [ 1.286208] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.286491] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.288507] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.288756] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.288880] usb 3-3: Product: USB2.0 Hub [ 1.289695] hub 3-3:1.0: USB hub found [ 1.290154] hub 3-3:1.0: 4 ports detected [ 1.314042] ata3.00: configured for UDMA/133 [ 1.314324] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.314921] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.314990] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.315231] sd 2:0:0:0: [sda] Write Protect is off [ 1.315385] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.315450] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.315680] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.335303] sda: sda1 sda2 < sda5 > [ 1.335839] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.337063] Freeing unused kernel image (initmem) memory: 1580K [ 1.337191] Write protecting the kernel read-only data: 22528k [ 1.355455] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.356776] Freeing unused kernel image (rodata/data gap) memory: 1560K [ 1.406769] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.533093] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.533249] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.533933] hub 3-4:1.0: USB hub found [ 1.534148] hub 3-4:1.0: 4 ports detected [ 1.596770] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.674349] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.674506] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.674679] usb 3-3.2: Product: USB2.0 Hub [ 1.675363] hub 3-3.2:1.0: USB hub found [ 1.675827] hub 3-3.2:1.0: 4 ports detected [ 1.821426] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.821560] Run /init as init process [ 1.821671] with arguments: [ 1.821672] /init [ 1.821673] placeholder [ 1.821674] with environment: [ 1.821675] HOME=/ [ 1.821676] TERM=linux [ 1.826760] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.931251] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.931413] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.937245] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 2.255933] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 2.257460] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 2.257819] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.279382] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.279591] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.279996] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.280217] xen: registering gsi 16 triggering 0 polarity 1 [ 2.280226] Already setup the GSI :16 [ 2.285368] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.285531] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.285852] xen: registering gsi 16 triggering 0 polarity 1 [ 2.285870] Already setup the GSI :16 [ 2.312872] pps pps0: new PPS source ptp0 [ 2.313050] igb 0000:07:00.0: added PHC on eth0 [ 2.313184] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.313305] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.313470] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.313585] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.313841] xen: registering gsi 17 triggering 0 polarity 1 [ 2.313851] Already setup the GSI :17 [ 2.343214] pps pps1: new PPS source ptp1 [ 2.343393] igb 0000:08:00.0: added PHC on eth1 [ 2.343528] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.343650] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.343825] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.343942] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.344175] xen: registering gsi 16 triggering 0 polarity 1 [ 2.344183] Already setup the GSI :16 [ 2.401349] igb 0000:0b:00.0: added PHC on eth2 [ 2.401491] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.401613] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.401833] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.401950] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.402178] xen: registering gsi 17 triggering 0 polarity 1 [ 2.402188] Already setup the GSI :17 [ 2.459694] igb 0000:0b:00.1: added PHC on eth3 [ 2.459850] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.459972] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.460176] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.460306] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.460530] xen: registering gsi 18 triggering 0 polarity 1 [ 2.460538] Already setup the GSI :18 [ 2.518276] igb 0000:0b:00.2: added PHC on eth4 [ 2.518420] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.518542] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.518746] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.518866] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.519142] xen: registering gsi 19 triggering 0 polarity 1 [ 2.519152] Already setup the GSI :19 [ 2.575041] igb 0000:0b:00.3: added PHC on eth5 [ 2.575199] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.575337] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.575542] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.575671] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.578815] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.590157] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.602082] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.615983] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.624126] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.637193] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 3.015170] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.143790] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.144021] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.436397] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.436851] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.437095] xen: registering gsi 17 triggering 0 polarity 1 [ 3.437106] Already setup the GSI :17 [ 4.176845] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.306568] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.306781] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.596764] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.599193] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.609259] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 5.020836] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.028355] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.388695] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.639682] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.655455] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.742301] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.273339] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.273508] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.273683] device enx0cc47a9f87be entered promiscuous mode [ 14.782356] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 14.886987] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 14.887288] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 14.887413] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 14.887695] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready