[ 0.000000] microcode: microcode updated early to revision 0x42e, date = 2019-03-14 [ 0.000000] Linux version 6.1.0-25-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.106-3 (2024-08-26) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 root=/dev/mapper/fiano0--vg-root ro console=ttyS0,115200n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007de2bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1799.927 MHz processor [ 0.000921] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000926] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000936] last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.001077] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001726] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved [ 0.001736] last_pfn = 0x7de2c max_arch_pfn = 0x400000000 [ 0.018544] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] [ 0.018569] Using GB pages for direct mapping [ 0.019040] RAMDISK: [mem 0x3310b000-0x3587cfff] [ 0.019048] ACPI: Early table checksum verification disabled [ 0.019053] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.019059] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019068] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019076] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.019082] ACPI: FACS 0x000000007E1D8080 000040 [ 0.019086] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.019091] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.019096] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.019102] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.019107] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.019112] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.019117] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.019122] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.019128] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.019133] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.019138] ACPI: DMAR 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.019143] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.019147] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.019149] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.019151] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.019152] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.019154] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.019155] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.019156] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.019158] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.019159] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.019161] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.019162] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.019163] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.019165] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.019166] ACPI: Reserving DMAR table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.019167] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.019237] No NUMA configuration found [ 0.019238] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] [ 0.019254] NODE_DATA(0) allocated [mem 0x27ffd3000-0x27fffdfff] [ 0.019715] Zone ranges: [ 0.019716] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.019719] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.019722] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.019724] Device empty [ 0.019725] Movable zone start for each node [ 0.019730] Early memory node ranges [ 0.019731] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.019733] node 0: [mem 0x0000000000100000-0x000000007de2bfff] [ 0.019735] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.019738] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.019746] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.019804] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.028042] On node 0, zone Normal: 8660 pages in unavailable ranges [ 0.028337] ACPI: PM-Timer IO Port: 0x408 [ 0.028349] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.028351] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.028353] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.028354] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.028366] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.028373] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.028376] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028380] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.028387] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028388] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.028395] TSC deadline timer available [ 0.028397] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.028419] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028422] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.028423] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.028425] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.028426] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.028428] PM: hibernation: Registered nosave memory: [mem 0x7de2c000-0x7debafff] [ 0.028430] PM: hibernation: Registered nosave memory: [mem 0x7debb000-0x7dfc3fff] [ 0.028431] PM: hibernation: Registered nosave memory: [mem 0x7dfc4000-0x7e1e0fff] [ 0.028432] PM: hibernation: Registered nosave memory: [mem 0x7e1e1000-0x7f36afff] [ 0.028433] PM: hibernation: Registered nosave memory: [mem 0x7f36b000-0x7f7fffff] [ 0.028435] PM: hibernation: Registered nosave memory: [mem 0x7f800000-0x7fffffff] [ 0.028436] PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff] [ 0.028437] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.028438] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff] [ 0.028439] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff] [ 0.028441] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.028443] [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.028445] Booting paravirtualized kernel on bare hardware [ 0.028448] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.035740] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.036135] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.036144] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.036148] pcpu-alloc: [0] 0 1 2 3 [ 0.036190] Fallback order for Node 0: 0 [ 0.036195] Built 1 zonelists, mobility grouping on. Total pages: 2055603 [ 0.036197] Policy zone: Normal [ 0.036198] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 root=/dev/mapper/fiano0--vg-root ro console=ttyS0,115200n8 [ 0.036268] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64", will be passed to user space. [ 0.036281] random: crng init done [ 0.037333] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.037903] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.037992] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.038004] software IO TLB: area num 4. [ 0.078876] Memory: 2033056K/8353556K available (14342K kernel code, 2335K rwdata, 9072K rodata, 2796K init, 17396K bss, 305212K reserved, 0K cma-reserved) [ 0.079089] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.079110] Kernel/User page tables isolation: enabled [ 0.079165] ftrace: allocating 40246 entries in 158 pages [ 0.089523] ftrace: allocated 158 pages with 5 groups [ 0.090470] Dynamic Preempt: voluntary [ 0.090514] rcu: Preemptible hierarchical RCU implementation. [ 0.090515] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.090517] Trampoline variant of Tasks RCU enabled. [ 0.090518] Rude variant of Tasks RCU enabled. [ 0.090519] Tracing variant of Tasks RCU enabled. [ 0.090520] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.090521] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.097951] NR_IRQS: 524544, nr_irqs: 864, preallocated irqs: 16 [ 0.098151] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.102688] Console: colour VGA+ 80x25 [ 1.027200] printk: console [ttyS0] enabled [ 1.031407] ACPI: Core revision 20220331 [ 1.036058] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 1.045195] APIC: Switch to symmetric I/O mode setup [ 1.050176] DMAR: Host address width 46 [ 1.054024] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 1.059353] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de [ 1.067275] DMAR: RMRR base: 0x0000007de91000 end: 0x0000007de9dfff [ 1.073549] DMAR: ATSR flags: 0x0 [ 1.076860] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 1.083128] DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0 [ 1.089488] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0 [ 1.095842] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 1.101249] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 1.110374] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 1.115769] x2apic enabled [ 1.118496] Switched APIC routing to cluster x2apic. [ 1.124006] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.149199] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f1e4a1587, max_idle_ns: 440795292121 ns [ 1.159715] Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.85 BogoMIPS (lpj=7199708) [ 1.163746] CPU0: Thermal monitoring enabled (TM1) [ 1.167799] process: using mwait in idle threads [ 1.171716] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 1.175713] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 1.179716] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.183715] Spectre V2 : Mitigation: Retpolines [ 1.187713] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.191713] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.195713] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 1.199715] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.203714] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 1.207714] MDS: Mitigation: Clear CPU buffers [ 1.211713] MMIO Stale Data: Unknown: No mitigations [ 1.215719] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.219713] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.223713] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.227714] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.231713] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.260260] Freeing SMP alternatives memory: 36K [ 1.263714] pid_max: default: 32768 minimum: 301 [ 1.267747] LSM: Security Framework initializing [ 1.271732] landlock: Up and running. [ 1.275713] Yama: disabled by default; enable with sysctl kernel.yama.* [ 1.279747] AppArmor: AppArmor initialized [ 1.283715] TOMOYO Linux initialized [ 1.287720] LSM support for eBPF active [ 1.291760] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.295729] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.304264] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2403 v2 @ 1.80GHz (family: 0x6, model: 0x3e, stepping: 0x4) [ 1.307903] cblist_init_generic: Setting adjustable number of callback queues. [ 1.311714] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.315745] cblist_init_generic: Setting adjustable number of callback queues. [ 1.319714] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.323736] cblist_init_generic: Setting adjustable number of callback queues. [ 1.327714] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.331736] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 1.335715] ... version: 3 [ 1.339713] ... bit width: 48 [ 1.343713] ... generic registers: 8 [ 1.347713] ... value mask: 0000ffffffffffff [ 1.351713] ... max period: 00007fffffffffff [ 1.355713] ... fixed-purpose events: 3 [ 1.359713] ... event mask: 00000007000000ff [ 1.363954] signal: max sigframe size: 1776 [ 1.367738] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 1.371745] rcu: Hierarchical SRCU implementation. [ 1.375714] rcu: Max phase no-delay instances is 1000. [ 1.380385] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.383811] smp: Bringing up secondary CPUs ... [ 1.387861] x86: Booting SMP configuration: [ 1.391719] .... node #0, CPUs: #1 #2 #3 [ 1.407075] smp: Brought up 1 node, 4 CPUs [ 1.411714] smpboot: Max logical packages: 1 [ 1.415714] smpboot: Total of 4 processors activated (14399.41 BogoMIPS) [ 1.439827] node 0 deferred pages initialised in 20ms [ 1.444173] devtmpfs: initialized [ 1.447795] x86/mm: Memory block size: 128MB [ 1.452754] ACPI: PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 1.455766] ACPI: PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 1.459870] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.463727] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.467775] pinctrl core: initialized pinctrl subsystem [ 1.472605] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.475996] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 1.479873] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.483874] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.487723] audit: initializing netlink subsys (disabled) [ 1.491728] audit: type=2000 audit(1726345402.404:1): state=initialized audit_enabled=0 res=1 [ 1.491865] thermal_sys: Registered thermal governor 'fair_share' [ 1.495717] thermal_sys: Registered thermal governor 'bang_bang' [ 1.499714] thermal_sys: Registered thermal governor 'step_wise' [ 1.503713] thermal_sys: Registered thermal governor 'user_space' [ 1.507713] thermal_sys: Registered thermal governor 'power_allocator' [ 1.511731] cpuidle: using governor ladder [ 1.519718] cpuidle: using governor menu [ 1.523688] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 1.523715] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.527816] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 1.531716] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 1.535723] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 1.540136] PCI: Using configuration type 1 for base access [ 1.543812] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 1.549033] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.551776] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 1.555716] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 1.563714] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 1.571713] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 1.575872] ACPI: Added _OSI(Module Device) [ 1.579717] ACPI: Added _OSI(Processor Device) [ 1.583714] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.591714] ACPI: Added _OSI(Processor Aggregator Device) [ 1.712239] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.741367] ACPI: Interpreter enabled [ 1.743736] ACPI: PM: (supports S0 S1 S4 S5) [ 1.747714] ACPI: Using IOAPIC for interrupt routing [ 1.755820] HEST: Table parsing has been initialized. [ 1.759837] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 1.763718] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.775714] PCI: Using E820 reservations for host bridge windows [ 1.780266] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.787822] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PRAD], AE_NOT_FOUND (20220331/psargs-330) [ 1.791717] ACPI Error: Aborting method \_GPE._L24 due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 1.795749] ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_L24] (20220331/evgpe-511) [ 1.799712] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.803712] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.811806] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR] [ 1.819866] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability] [ 1.827714] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.836074] PCI host bridge to bus 0000:00 [ 1.839716] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.847714] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.855714] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.859714] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.867714] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 1.875714] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.883714] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.891714] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.899714] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.903745] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.907798] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.915839] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.923814] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.927882] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.935812] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.939881] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.947752] pci 0000:00:03.0: enabling Extended Tags [ 1.951778] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.959869] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.963731] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.971859] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.975730] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.983852] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 1.991730] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 1.995849] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 2.003730] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 2.007850] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 2.015730] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 2.023848] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 2.027730] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 2.035849] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 2.039732] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 2.047849] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 2.055730] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 2.059847] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 2.067843] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 2.071837] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 2.079725] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 2.087864] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 2.091834] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 2.099856] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 2.103732] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 2.111782] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 2.115803] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 2.123732] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 2.131782] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 2.135816] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 2.143730] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 2.147805] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.155819] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 2.159813] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.167744] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 2.171715] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 2.179831] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 2.183813] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.191740] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 2.195715] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 2.203830] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 2.207730] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 2.215805] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.219816] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.227864] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 2.231930] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 2.239727] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 2.243720] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 2.251720] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 2.255720] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 2.263720] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 2.267720] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 2.271758] pci 0000:00:1f.2: PME# supported from D3hot [ 2.279804] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 2.283732] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 2.291737] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 2.295789] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 2.303734] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 2.311876] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.315765] pci 0000:00:01.1: PCI bridge to [bus 02] [ 2.319764] pci 0000:00:03.0: PCI bridge to [bus 03] [ 2.323797] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 2.331736] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 2.339728] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 2.347723] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 2.351740] pci 0000:04:00.0: enabling Extended Tags [ 2.355820] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 2.363714] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 2.375969] pci 0000:00:11.0: PCI bridge to [bus 04] [ 2.379717] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 2.383722] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 2.391812] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 2.399749] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 2.403751] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 2.411732] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 2.415903] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 2.423935] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 2.427717] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 2.435716] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 2.443815] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 2.447749] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 2.455751] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 2.459732] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 2.467900] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 2.471929] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 2.475717] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 2.483716] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 2.491736] pci_bus 0000:07: extended config space not accessible [ 2.495740] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 2.503730] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 2.507722] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 2.515722] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 2.523760] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.531825] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 2.535718] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 2.543720] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 2.551714] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 2.559714] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 2.567714] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 2.575714] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 2.587714] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 2.595714] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 2.603714] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 2.611714] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 2.624507] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 2.627718] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.639732] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 2.647714] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 2.655780] PCI host bridge to bus 0000:ff [ 2.659715] pci_bus 0000:ff: root bus resource [bus ff] [ 2.663727] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 2.671793] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 2.675783] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 2.683774] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 2.687773] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 2.695776] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 2.699780] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 2.707771] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 2.715772] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 2.719772] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 2.727774] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 2.731771] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 2.739774] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 2.743776] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 2.751791] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 2.755803] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 2.763797] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 2.767797] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 2.775796] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 2.779795] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 2.787798] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 2.791798] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 2.799804] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 2.803797] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 2.811796] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 2.815796] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 2.823802] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 2.827796] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 2.835794] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 2.839773] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 2.847779] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 2.851774] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 2.859776] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 2.867773] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 2.871771] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 2.879933] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 2.883767] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 2.891764] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 2.895764] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 2.903764] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 2.907764] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 2.915775] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 2.919764] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 2.929339] iommu: Default domain type: Translated [ 2.931714] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.939806] pps_core: LinuxPPS API ver. 1 registered [ 2.943714] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.951716] PTP clock support registered [ 2.955653] EDAC MC: Ver: 3.0.0 [ 2.959976] NetLabel: Initializing [ 2.963380] NetLabel: domain hash size = 128 [ 2.967716] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 2.975736] NetLabel: unlabeled traffic allowed by default [ 2.979714] PCI: Using ACPI for IRQ routing [ 2.990714] PCI: pci_cache_line_size set to 64 bytes [ 2.990840] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] [ 2.990843] e820: reserve RAM buffer [mem 0x7de2c000-0x7fffffff] [ 2.991758] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 2.995712] pci 0000:07:01.0: vgaarb: bridge control possible [ 2.995712] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.011721] vgaarb: loaded [ 3.016430] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 3.023714] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 3.031713] clocksource: Switched to clocksource tsc-early [ 3.037409] VFS: Disk quotas dquot_6.6.0 [ 3.041358] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.048426] AppArmor: AppArmor Filesystem Enabled [ 3.053167] pnp: PnP ACPI init [ 3.056383] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 3.063000] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 3.069612] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 3.076225] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 3.082966] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 3.090071] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 3.095996] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 3.103275] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 3.109391] pnp 00:07: [dma 0 disabled] [ 3.109643] pnp 00:08: [dma 0 disabled] [ 3.109923] system 00:09: [io 0x0400-0x0453] has been reserved [ 3.115845] system 00:09: [io 0x0458-0x047f] has been reserved [ 3.121762] system 00:09: [io 0x1180-0x119f] has been reserved [ 3.127680] system 00:09: [io 0x0500-0x057f] has been reserved [ 3.133601] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 3.140213] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 3.147172] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 3.153891] system 00:0a: [io 0x0454-0x0457] has been reserved [ 3.160086] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 3.167317] pnp: PnP ACPI: found 12 devices [ 3.178017] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.186982] NET: Registered PF_INET protocol family [ 3.192045] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 3.202370] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 3.210943] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.218776] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 3.227084] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 3.234873] TCP: Hash tables configured (established 65536 bind 65536) [ 3.241503] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 3.249055] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.255883] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.263171] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.268842] NET: Registered PF_XDP protocol family [ 3.273654] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.278627] pci 0000:00:01.1: PCI bridge to [bus 02] [ 3.283600] pci 0000:00:03.0: PCI bridge to [bus 03] [ 3.288576] pci 0000:00:11.0: PCI bridge to [bus 04] [ 3.293544] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 3.299646] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.307390] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 3.312358] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 3.318455] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 3.325245] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 3.330213] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 3.336307] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 3.343101] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 3.348070] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 3.354855] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.362598] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 3.368782] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 3.374961] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 3.381140] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 3.387320] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.394193] pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.401066] pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.408026] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.414987] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 3.420557] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.427778] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 3.433350] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 3.439616] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 3.445189] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 3.451456] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 3.457722] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.464942] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 3.471121] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 3.477300] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 3.483481] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 3.489661] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.496534] pci_bus 0000:07: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.503407] pci_bus 0000:07: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.510366] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.517419] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 3.545645] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 20661 usecs [ 3.577631] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 23997 usecs [ 3.585134] PCI: CLS 64 bytes, default 64 [ 3.589195] DMAR: No SATC found [ 3.589253] Trying to unpack rootfs image as initramfs... [ 3.592342] DMAR: dmar0: Using Queued invalidation [ 3.592419] pci 0000:00:00.0: Adding to iommu group 0 [ 3.607647] pci 0000:00:01.0: Adding to iommu group 1 [ 3.612724] pci 0000:00:01.1: Adding to iommu group 2 [ 3.617809] pci 0000:00:03.0: Adding to iommu group 3 [ 3.622894] pci 0000:00:04.0: Adding to iommu group 4 [ 3.627973] pci 0000:00:04.1: Adding to iommu group 5 [ 3.633055] pci 0000:00:04.2: Adding to iommu group 6 [ 3.638143] pci 0000:00:04.3: Adding to iommu group 7 [ 3.643224] pci 0000:00:04.4: Adding to iommu group 8 [ 3.648305] pci 0000:00:04.5: Adding to iommu group 9 [ 3.653385] pci 0000:00:04.6: Adding to iommu group 10 [ 3.658547] pci 0000:00:04.7: Adding to iommu group 11 [ 3.663716] pci 0000:00:05.0: Adding to iommu group 12 [ 3.668880] pci 0000:00:05.2: Adding to iommu group 13 [ 3.674050] pci 0000:00:05.4: Adding to iommu group 14 [ 3.679222] pci 0000:00:11.0: Adding to iommu group 15 [ 3.684405] pci 0000:00:16.0: Adding to iommu group 16 [ 3.689569] pci 0000:00:16.1: Adding to iommu group 16 [ 3.694745] pci 0000:00:1a.0: Adding to iommu group 17 [ 3.699922] pci 0000:00:1c.0: Adding to iommu group 18 [ 3.705092] pci 0000:00:1c.1: Adding to iommu group 19 [ 3.710256] pci 0000:00:1d.0: Adding to iommu group 20 [ 3.715422] pci 0000:00:1e.0: Adding to iommu group 21 [ 3.720635] pci 0000:00:1f.0: Adding to iommu group 22 [ 3.725804] pci 0000:00:1f.2: Adding to iommu group 22 [ 3.730973] pci 0000:00:1f.3: Adding to iommu group 22 [ 3.736137] pci 0000:00:1f.6: Adding to iommu group 22 [ 3.741313] pci 0000:04:00.0: Adding to iommu group 23 [ 3.746478] pci 0000:05:00.0: Adding to iommu group 24 [ 3.751643] pci 0000:06:00.0: Adding to iommu group 25 [ 3.756789] pci 0000:07:01.0: Adding to iommu group 21 [ 3.761972] pci 0000:ff:08.0: Adding to iommu group 26 [ 3.767151] pci 0000:ff:09.0: Adding to iommu group 27 [ 3.772365] pci 0000:ff:0a.0: Adding to iommu group 28 [ 3.777540] pci 0000:ff:0a.1: Adding to iommu group 28 [ 3.782706] pci 0000:ff:0a.2: Adding to iommu group 28 [ 3.787877] pci 0000:ff:0a.3: Adding to iommu group 28 [ 3.793071] pci 0000:ff:0b.0: Adding to iommu group 29 [ 3.798240] pci 0000:ff:0b.3: Adding to iommu group 29 [ 3.803431] pci 0000:ff:0c.0: Adding to iommu group 30 [ 3.808604] pci 0000:ff:0c.1: Adding to iommu group 30 [ 3.813797] pci 0000:ff:0d.0: Adding to iommu group 31 [ 3.818970] pci 0000:ff:0d.1: Adding to iommu group 31 [ 3.824157] pci 0000:ff:0e.0: Adding to iommu group 32 [ 3.829332] pci 0000:ff:0e.1: Adding to iommu group 32 [ 3.834503] pci 0000:ff:0f.0: Adding to iommu group 33 [ 3.839673] pci 0000:ff:0f.1: Adding to iommu group 34 [ 3.844839] pci 0000:ff:0f.2: Adding to iommu group 35 [ 3.850007] pci 0000:ff:0f.3: Adding to iommu group 36 [ 3.855170] pci 0000:ff:0f.4: Adding to iommu group 37 [ 3.860334] pci 0000:ff:0f.5: Adding to iommu group 38 [ 3.865504] pci 0000:ff:10.0: Adding to iommu group 39 [ 3.870669] pci 0000:ff:10.1: Adding to iommu group 40 [ 3.875832] pci 0000:ff:10.2: Adding to iommu group 41 [ 3.880998] pci 0000:ff:10.3: Adding to iommu group 42 [ 3.886164] pci 0000:ff:10.4: Adding to iommu group 43 [ 3.891334] pci 0000:ff:10.5: Adding to iommu group 44 [ 3.896507] pci 0000:ff:10.6: Adding to iommu group 45 [ 3.901691] pci 0000:ff:10.7: Adding to iommu group 46 [ 3.906907] pci 0000:ff:13.0: Adding to iommu group 47 [ 3.912086] pci 0000:ff:13.1: Adding to iommu group 47 [ 3.917260] pci 0000:ff:13.4: Adding to iommu group 47 [ 3.922434] pci 0000:ff:13.5: Adding to iommu group 47 [ 3.927638] pci 0000:ff:16.0: Adding to iommu group 48 [ 3.932822] pci 0000:ff:16.1: Adding to iommu group 48 [ 3.938004] pci 0000:ff:16.2: Adding to iommu group 48 [ 3.947063] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 3.953514] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.959955] software IO TLB: mapped [mem 0x0000000079e2c000-0x000000007de2c000] (64MB) [ 3.968431] Initialise system trusted keyrings [ 3.972892] Key type blacklist registered [ 3.976988] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 3.985270] zbud: loaded [ 3.988131] integrity: Platform Keyring initialized [ 3.993024] integrity: Machine keyring initialized [ 3.997823] Key type asymmetric registered [ 4.001919] Asymmetric key parser 'x509' registered [ 4.035001] Freeing initrd memory: 40392K [ 4.046381] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 4.052161] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 4.059600] io scheduler mq-deadline registered [ 4.066574] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.073394] Monitor-Mwait will be used to enter C-1 state [ 4.073408] Monitor-Mwait will be used to enter C-2 state [ 4.073415] ACPI: \_SB_.SCK0.C000: Found 2 idle states [ 4.083531] ERST: Error Record Serialization Table (ERST) support is initialized. [ 4.091016] pstore: Registered erst as persistent store backend [ 4.097108] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.103546] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.111641] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.119864] Linux agpgart interface v0.103 [ 4.124103] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 4.133238] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 4.140120] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 4.150236] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.155211] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.160456] mousedev: PS/2 mouse device common for all mice [ 4.166072] rtc_cmos 00:02: RTC can wake from S4 [ 4.170971] rtc_cmos 00:02: registered as rtc0 [ 4.175453] rtc_cmos 00:02: setting system clock to 2024-09-14T20:23:26 UTC (1726345406) [ 4.183578] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.191378] intel_pstate: Intel P-state driver initializing [ 4.197227] ledtrig-cpu: registered to indicate activity on CPUs [ 4.221730] NET: Registered PF_INET6 protocol family [ 4.235795] Segment Routing with IPv6 [ 4.239489] In-situ OAM (IOAM) with IPv6 [ 4.243454] mip6: Mobile IPv6 [ 4.246432] NET: Registered PF_PACKET protocol family [ 4.251579] mpls_gso: MPLS GSO support [ 4.255825] microcode: sig=0x306e4, pf=0x8, revision=0x42e [ 4.261356] microcode: Microcode Update Driver: v2.2. [ 4.261364] IPI shorthand broadcast: enabled [ 4.270718] sched_clock: Marking stable (3281154810, 989528864)->(4638875328, -368191654) [ 4.279159] registered taskstats version 1 [ 4.283277] Loading compiled-in X.509 certificates [ 4.330511] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.339240] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 4.349892] zswap: loaded using pool lzo/zbud [ 4.354503] Key type .fscrypt registered [ 4.358435] Key type fscrypt-provisioning registered [ 4.363713] pstore: Using crash dump compression: deflate [ 4.375664] Key type encrypted registered [ 4.379703] AppArmor: AppArmor sha1 policy hashing enabled [ 4.385199] ima: No TPM chip found, activating TPM-bypass! [ 4.390681] ima: Allocated hash algorithm: sha256 [ 4.395402] ima: No architecture policies found [ 4.399951] evm: Initialising EVM extended attributes: [ 4.405084] evm: security.selinux [ 4.408405] evm: security.SMACK64 (disabled) [ 4.412677] evm: security.SMACK64EXEC (disabled) [ 4.417298] evm: security.SMACK64TRANSMUTE (disabled) [ 4.422349] evm: security.SMACK64MMAP (disabled) [ 4.426970] evm: security.apparmor [ 4.430375] evm: security.ima [ 4.433345] evm: security.capability [ 4.436920] evm: HMAC attrs: 0x1 [ 4.615548] clk: Disabling unused clocks [ 4.621156] Freeing unused decrypted memory: 2036K [ 4.626587] Freeing unused kernel image (initmem) memory: 2796K [ 4.632595] Write protecting the kernel read-only data: 26624k [ 4.639144] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 4.646075] Freeing unused kernel image (rodata/data gap) memory: 1168K [ 4.735527] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.741971] x86/mm: Checking user space page tables [ 4.822260] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.828704] Run /init as init process [ 4.832373] with arguments: [ 4.832375] /init [ 4.832376] with environment: [ 4.832378] HOME=/ [ 4.832379] TERM=linux [ 4.832380] BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 [ 4.989554] tsc: Refined TSC clocksource calibration: 1799.999 MHz [ 4.995745] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 5.006048] clocksource: Switched to clocksource tsc [ 5.050563] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 5.062477] i2c i2c-0: 1/6 memory slots populated (from DMI) [ 5.068155] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 5.087662] ACPI: bus type USB registered [ 5.091880] usbcore: registered new interface driver usbfs [ 5.094936] SCSI subsystem initialized [ 5.095896] e1000e: Intel(R) PRO/1000 Network Driver [ 5.095898] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 5.096179] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.097399] usbcore: registered new interface driver hub [ 5.131055] usbcore: registered new device driver usb [ 5.145082] libata version 3.00 loaded. [ 5.146093] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.151337] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.152649] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 5.158751] ehci-pci 0000:00:1a.0: debug port 2 [ 5.174796] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 5.180790] ahci 0000:00:1f.2: version 3.0 [ 5.191075] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 5.199272] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 5.201557] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.213117] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.218004] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:13:33:8c [ 5.221380] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.229298] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 5.236509] usb usb1: Product: EHCI Host Controller [ 5.243463] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.248260] usb usb1: Manufacturer: Linux 6.1.0-25-amd64 ehci_hcd [ 5.255268] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.261057] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.274592] scsi host0: ahci [ 5.275147] hub 1-0:1.0: USB hub found [ 5.278039] scsi host1: ahci [ 5.281612] hub 1-0:1.0: 2 ports detected [ 5.284701] scsi host2: ahci [ 5.288858] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.291533] scsi host3: ahci [ 5.296619] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.299646] scsi host4: ahci [ 5.306908] ehci-pci 0000:00:1d.0: debug port 2 [ 5.309939] scsi host5: ahci [ 5.317271] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 32 [ 5.317673] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 5.318285] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 5.324671] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 32 [ 5.331130] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 5.335851] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 5.335874] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.335944] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.335948] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.335950] usb usb2: Product: EHCI Host Controller [ 5.335952] usb usb2: Manufacturer: Linux 6.1.0-25-amd64 ehci_hcd [ 5.335954] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.336257] hub 2-0:1.0: USB hub found [ 5.336267] hub 2-0:1.0: 2 ports detected [ 5.336771] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 32 [ 5.362615] isci 0000:04:00.0: OEM parameter table found in OROM [ 5.364680] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 32 [ 5.372933] isci 0000:04:00.0: OEM SAS parameters (version: 1.0) loaded (platform) [ 5.380154] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 32 [ 5.391069] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:13:33:8d [ 5.391124] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 32 [ 5.395748] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 5.399825] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 5.403594] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.413680] scsi host6: isci [ 5.549594] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.589587] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.709924] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.712452] ata3: SATA link down (SStatus 0 SControl 300) [ 5.718122] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.723559] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.736884] ata4: SATA link down (SStatus 0 SControl 300) [ 5.738306] hub 1-1:1.0: USB hub found [ 5.742329] ata6: SATA link down (SStatus 0 SControl 300) [ 5.751531] ata2: SATA link down (SStatus 0 SControl 300) [ 5.756981] hub 1-1:1.0: 6 ports detected [ 5.757011] ata5: SATA link down (SStatus 0 SControl 300) [ 5.765880] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.766579] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 5.774600] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.774963] hub 2-1:1.0: USB hub found [ 5.781742] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.789008] hub 2-1:1.0: 8 ports detected [ 5.793971] ata1.00: configured for UDMA/133 [ 5.807673] scsi: waiting for bus probes to complete ... [ 5.909799] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 5.920039] e1000e 0000:05:00.0 enx0cc47a13338c: renamed from eth0 [ 5.948131] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.955807] sd 0:0:0:0: [sda] Write Protect is off [ 5.960603] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.960623] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.961077] e1000e 0000:06:00.0 enx0cc47a13338d: renamed from eth1 [ 5.969691] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 6.003603] sda: sda1 sda2 < sda5 > [ 6.007486] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.093595] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 6.207668] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 6.216037] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.223351] usb 1-1.1: Product: Hermon USB hidmouse Device [ 6.228849] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 6.250194] hid: raw HID events driver (C) Jiri Kosina [ 6.263143] usbcore: registered new interface driver usbhid [ 6.268732] usbhid: USB HID core driver [ 6.276208] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input3 [ 6.291105] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 6.306148] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input4 [ 6.433517] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.445741] device-mapper: uevent: version 1.0.3 [ 6.450482] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 6.485742] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 6.975227] PM: Image not found (code -22) [ 7.397768] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 7.409334] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 7.595873] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 9.478715] dca service started, version 1.12.1 [ 9.483489] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 9.505594] ACPI: button: Power Button [PWRB] [ 9.510096] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 9.517556] ACPI: button: Power Button [PWRF] [ 9.533689] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 9.551804] iTCO_vendor_support: vendor-support=0 [ 9.551818] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 9.564014] IPMI message handler: version 39.2 [ 9.575311] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.580772] ipmi device interface [ 9.642432] ipmi_si: IPMI System Interface driver [ 9.642450] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 9.647175] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 9.660066] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 9.668278] ipmi_si: Adding SMBIOS-specified kcs state machine [ 9.674364] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 9.674481] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 9.690122] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 9.761440] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 9.770147] ipmi_si: Adding ACPI-specified kcs state machine [ 9.775884] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 9.864916] ACPI: bus type drm_connector registered [ 9.920282] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 9.928210] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 9.933955] RAPL PMU: hw unit of domain package 2^-16 Joules [ 9.939620] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 9.997889] cryptd: max_cpu_qlen set to 1000 [ 10.068605] mgag200 0000:07:01.0: vgaarb: deactivate vga console [ 10.079850] Console: switching to colour dummy device 80x25 [ 10.091597] [drm] Initialized mgag200 1.0.0 20110418 for 0000:07:01.0 on minor 0 [ 10.101063] fbcon: mgag200drmfb (fb0) is primary device [ 10.101607] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 10.136371] AVX version of gcm_enc/dec engaged. [ 10.136414] AES CTR mode by8 optimization enabled [ 10.146301] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x0703, dev_id: 0x20) [ 10.184804] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 10.206555] ipmi_ssif: IPMI SSIF Interface driver [ 10.473008] Console: switching to colour frame buffer device 128x48 [ 10.595906] mgag200 0000:07:01.0: [drm] fb0: mgag200drmfb frame buffer device [ 10.984630] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.984657] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.984664] EDAC sbridge: Seeking for: PCI ID 8086:0e60 [ 10.984672] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.984681] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.984684] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.984693] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.984696] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.984705] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.984708] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.984717] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.984720] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.984728] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.984732] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.984741] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.984744] EDAC sbridge: Seeking for: PCI ID 8086:0e68 [ 10.984752] EDAC sbridge: Seeking for: PCI ID 8086:0e79 [ 10.984759] EDAC sbridge: Seeking for: PCI ID 8086:0e6a [ 10.984767] EDAC sbridge: Seeking for: PCI ID 8086:0e6b [ 10.984774] EDAC sbridge: Seeking for: PCI ID 8086:0e6c [ 10.984782] EDAC sbridge: Seeking for: PCI ID 8086:0e6d [ 10.984790] EDAC sbridge: Seeking for: PCI ID 8086:0eb8 [ 10.984797] EDAC sbridge: Seeking for: PCI ID 8086:0ebc [ 10.984805] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.984815] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.984817] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.984827] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.984829] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.984839] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.984976] EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT) [ 10.996042] EDAC sbridge: Ver: 1.1.2 [ 11.101412] intel_rapl_common: Found RAPL domain package [ 11.106740] intel_rapl_common: Found RAPL domain core [ 11.111796] intel_rapl_common: Found RAPL domain dram [ 12.250101] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 13.026948] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 13.041184] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 13.097796] Adding 1949692k swap on /dev/mapper/fiano0--vg-swap_1. Priority:-2 extents:1 across:1949692k FS [ 14.251531] audit: type=1400 audit(1726345416.548:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1067 comm="apparmor_parser" [ 14.267105] audit: type=1400 audit(1726345416.548:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1067 comm="apparmor_parser" [ 14.283017] audit: type=1400 audit(1726345416.552:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1066 comm="apparmor_parser" [ 14.315225] audit: type=1400 audit(1726345416.612:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1069 comm="apparmor_parser" [ 14.330661] audit: type=1400 audit(1726345416.612:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1069 comm="apparmor_parser" [ 14.345628] audit: type=1400 audit(1726345416.616:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1069 comm="apparmor_parser" [ 14.503303] audit: type=1400 audit(1726345416.800:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=1105 comm="apparmor_parser" [ 14.524897] audit: type=1400 audit(1726345416.820:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1068 comm="apparmor_parser" [ 14.542883] audit: type=1400 audit(1726345416.824:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1068 comm="apparmor_parser" [ 14.560327] audit: type=1400 audit(1726345416.824:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1068 comm="apparmor_parser" [ 17.558629] e1000e 0000:05:00.0 enx0cc47a13338c: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 17.568389] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a13338c: link becomes ready