[ 0.000000] microcode: microcode updated early to revision 0x42e, date = 2019-03-14 [ 0.000000] Linux version 6.1.0-25-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.106-3 (2024-08-26) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007de2bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1799.977 MHz processor [ 0.000921] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000925] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000936] last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.001076] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001721] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved [ 0.001731] last_pfn = 0x7de2c max_arch_pfn = 0x400000000 [ 0.018538] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] [ 0.018563] Using GB pages for direct mapping [ 0.018817] RAMDISK: [mem 0x3310b000-0x3587cfff] [ 0.018825] ACPI: Early table checksum verification disabled [ 0.018829] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.018836] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.018844] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.018853] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.018859] ACPI: FACS 0x000000007E1D8080 000040 [ 0.018863] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.018868] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.018873] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.018879] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.018884] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.018889] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.018894] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.018900] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.018905] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.018910] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.018916] ACPI: DMAR 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.018921] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.018925] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.018927] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.018929] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.018930] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.018932] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.018933] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.018934] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.018936] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.018937] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.018938] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.018940] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.018941] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.018943] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.018944] ACPI: Reserving DMAR table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.018945] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.019015] No NUMA configuration found [ 0.019016] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] [ 0.019032] NODE_DATA(0) allocated [mem 0x27ffd5000-0x27fffffff] [ 0.019492] Zone ranges: [ 0.019494] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.019497] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.019499] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.019501] Device empty [ 0.019503] Movable zone start for each node [ 0.019507] Early memory node ranges [ 0.019508] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.019510] node 0: [mem 0x0000000000100000-0x000000007de2bfff] [ 0.019512] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.019516] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.019523] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.019581] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.027817] On node 0, zone Normal: 8660 pages in unavailable ranges [ 0.028113] ACPI: PM-Timer IO Port: 0x408 [ 0.028125] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.028127] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.028129] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.028130] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.028143] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.028149] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.028153] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028156] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.028163] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028164] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.028171] TSC deadline timer available [ 0.028172] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.028193] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028196] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.028198] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.028199] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.028200] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.028202] PM: hibernation: Registered nosave memory: [mem 0x7de2c000-0x7debafff] [ 0.028204] PM: hibernation: Registered nosave memory: [mem 0x7debb000-0x7dfc3fff] [ 0.028205] PM: hibernation: Registered nosave memory: [mem 0x7dfc4000-0x7e1e0fff] [ 0.028206] PM: hibernation: Registered nosave memory: [mem 0x7e1e1000-0x7f36afff] [ 0.028207] PM: hibernation: Registered nosave memory: [mem 0x7f36b000-0x7f7fffff] [ 0.028209] PM: hibernation: Registered nosave memory: [mem 0x7f800000-0x7fffffff] [ 0.028210] PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff] [ 0.028211] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.028212] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff] [ 0.028214] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff] [ 0.028215] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.028217] [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.028219] Booting paravirtualized kernel on bare hardware [ 0.028222] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.035513] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.035909] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.035918] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.035922] pcpu-alloc: [0] 0 1 2 3 [ 0.035962] Fallback order for Node 0: 0 [ 0.035967] Built 1 zonelists, mobility grouping on. Total pages: 2055603 [ 0.035969] Policy zone: Normal [ 0.035971] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.036040] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64", will be passed to user space. [ 0.036053] random: crng init done [ 0.037102] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.037671] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.037760] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.037772] software IO TLB: area num 4. [ 0.079432] Memory: 2086372K/8353556K available (14342K kernel code, 2335K rwdata, 9072K rodata, 2796K init, 17396K bss, 305204K reserved, 0K cma-reserved) [ 0.079644] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.079666] Kernel/User page tables isolation: enabled [ 0.079719] ftrace: allocating 40246 entries in 158 pages [ 0.090069] ftrace: allocated 158 pages with 5 groups [ 0.091018] Dynamic Preempt: voluntary [ 0.091063] rcu: Preemptible hierarchical RCU implementation. [ 0.091064] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.091066] Trampoline variant of Tasks RCU enabled. [ 0.091067] Rude variant of Tasks RCU enabled. [ 0.091068] Tracing variant of Tasks RCU enabled. [ 0.091069] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.091070] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.098501] NR_IRQS: 524544, nr_irqs: 864, preallocated irqs: 16 [ 0.098708] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.103218] Console: colour VGA+ 80x25 [ 1.027689] printk: console [ttyS0] enabled [ 1.031896] ACPI: Core revision 20220331 [ 1.036546] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 1.045685] APIC: Switch to symmetric I/O mode setup [ 1.050665] DMAR: Host address width 46 [ 1.054514] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 1.059841] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de [ 1.067762] DMAR: RMRR base: 0x0000007de91000 end: 0x0000007de9dfff [ 1.074029] DMAR: ATSR flags: 0x0 [ 1.077342] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 1.083617] DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0 [ 1.089977] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0 [ 1.096336] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 1.101736] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 1.110867] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 1.116263] x2apic enabled [ 1.118984] Switched APIC routing to cluster x2apic. [ 1.124490] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.149686] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f213cc15e, max_idle_ns: 440795245209 ns [ 1.160202] Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.95 BogoMIPS (lpj=7199908) [ 1.164232] CPU0: Thermal monitoring enabled (TM1) [ 1.168285] process: using mwait in idle threads [ 1.172203] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 1.176200] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 1.180203] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.184201] Spectre V2 : Mitigation: Retpolines [ 1.188200] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.192200] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.196200] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 1.200201] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.204201] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 1.208201] MDS: Mitigation: Clear CPU buffers [ 1.212200] MMIO Stale Data: Unknown: No mitigations [ 1.216206] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.220200] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.224200] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.228201] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.232200] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.260764] Freeing SMP alternatives memory: 36K [ 1.264201] pid_max: default: 32768 minimum: 301 [ 1.268234] LSM: Security Framework initializing [ 1.272218] landlock: Up and running. [ 1.276200] Yama: disabled by default; enable with sysctl kernel.yama.* [ 1.280231] AppArmor: AppArmor initialized [ 1.284202] TOMOYO Linux initialized [ 1.288207] LSM support for eBPF active [ 1.292247] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.296216] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.304752] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2403 v2 @ 1.80GHz (family: 0x6, model: 0x3e, stepping: 0x4) [ 1.308391] cblist_init_generic: Setting adjustable number of callback queues. [ 1.312201] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.316231] cblist_init_generic: Setting adjustable number of callback queues. [ 1.320201] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.324223] cblist_init_generic: Setting adjustable number of callback queues. [ 1.328201] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.332221] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 1.336202] ... version: 3 [ 1.340200] ... bit width: 48 [ 1.344200] ... generic registers: 8 [ 1.348200] ... value mask: 0000ffffffffffff [ 1.352200] ... max period: 00007fffffffffff [ 1.356200] ... fixed-purpose events: 3 [ 1.360200] ... event mask: 00000007000000ff [ 1.364433] signal: max sigframe size: 1776 [ 1.368225] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 1.372233] rcu: Hierarchical SRCU implementation. [ 1.376201] rcu: Max phase no-delay instances is 1000. [ 1.380875] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.384293] smp: Bringing up secondary CPUs ... [ 1.388349] x86: Booting SMP configuration: [ 1.392206] .... node #0, CPUs: #1 #2 #3 [ 1.407556] smp: Brought up 1 node, 4 CPUs [ 1.412201] smpboot: Max logical packages: 1 [ 1.416201] smpboot: Total of 4 processors activated (14399.81 BogoMIPS) [ 1.440840] node 0 deferred pages initialised in 20ms [ 1.444666] devtmpfs: initialized [ 1.448282] x86/mm: Memory block size: 128MB [ 1.453242] ACPI: PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 1.456252] ACPI: PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 1.460356] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.464213] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.468262] pinctrl core: initialized pinctrl subsystem [ 1.473107] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.476478] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 1.480353] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.484354] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.488210] audit: initializing netlink subsys (disabled) [ 1.492215] audit: type=2000 audit(1726421799.404:1): state=initialized audit_enabled=0 res=1 [ 1.492350] thermal_sys: Registered thermal governor 'fair_share' [ 1.496204] thermal_sys: Registered thermal governor 'bang_bang' [ 1.500201] thermal_sys: Registered thermal governor 'step_wise' [ 1.504201] thermal_sys: Registered thermal governor 'user_space' [ 1.508201] thermal_sys: Registered thermal governor 'power_allocator' [ 1.512219] cpuidle: using governor ladder [ 1.520205] cpuidle: using governor menu [ 1.524175] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 1.524202] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.528303] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 1.532203] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 1.536210] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 1.540623] PCI: Using configuration type 1 for base access [ 1.544299] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 1.549523] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.552261] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 1.556203] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 1.564203] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 1.572201] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 1.576625] ACPI: Added _OSI(Module Device) [ 1.580204] ACPI: Added _OSI(Processor Device) [ 1.584201] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.592202] ACPI: Added _OSI(Processor Aggregator Device) [ 1.713913] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.741861] ACPI: Interpreter enabled [ 1.744223] ACPI: PM: (supports S0 S1 S4 S5) [ 1.748201] ACPI: Using IOAPIC for interrupt routing [ 1.756307] HEST: Table parsing has been initialized. [ 1.760327] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 1.764205] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.776201] PCI: Using E820 reservations for host bridge windows [ 1.780754] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.788310] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PRAD], AE_NOT_FOUND (20220331/psargs-330) [ 1.792204] ACPI Error: Aborting method \_GPE._L24 due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 1.796204] ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_L24] (20220331/evgpe-511) [ 1.800199] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.804199] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.812293] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR] [ 1.820354] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability] [ 1.828201] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.836561] PCI host bridge to bus 0000:00 [ 1.840203] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.848201] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.856201] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.860201] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.868201] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 1.876201] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.884201] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.892201] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.900201] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.904231] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.908284] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.916325] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.924301] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.928369] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.936299] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.940369] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.948239] pci 0000:00:03.0: enabling Extended Tags [ 1.952265] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.960355] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.964218] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.972346] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.976217] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.984336] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 1.992217] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 1.996335] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 2.004217] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 2.008337] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 2.016217] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 2.024335] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 2.028217] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 2.036337] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 2.040220] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 2.048336] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 2.056217] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 2.060334] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 2.068331] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 2.072326] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 2.080212] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 2.088351] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 2.092321] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 2.100342] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 2.104219] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 2.112269] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 2.116289] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 2.124219] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 2.132269] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 2.136303] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 2.144217] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 2.148291] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.156306] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 2.160300] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.168231] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 2.172202] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 2.180304] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 2.184300] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.192225] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 2.196202] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 2.204328] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 2.208217] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 2.216292] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.220304] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.228346] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 2.232416] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 2.240214] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 2.244207] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 2.252207] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 2.256207] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 2.264207] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 2.268208] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 2.272245] pci 0000:00:1f.2: PME# supported from D3hot [ 2.280291] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 2.284218] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 2.292224] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 2.296277] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 2.304221] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 2.312364] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.316252] pci 0000:00:01.1: PCI bridge to [bus 02] [ 2.320251] pci 0000:00:03.0: PCI bridge to [bus 03] [ 2.324284] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 2.332223] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 2.340215] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 2.348210] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 2.352227] pci 0000:04:00.0: enabling Extended Tags [ 2.356307] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 2.364201] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 2.376456] pci 0000:00:11.0: PCI bridge to [bus 04] [ 2.380204] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 2.384209] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 2.392298] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 2.400236] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 2.404238] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 2.412219] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 2.416391] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 2.424425] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 2.428204] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 2.436203] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 2.444302] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 2.448236] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 2.456238] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 2.460219] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 2.468386] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 2.472416] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 2.476204] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 2.484203] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 2.492223] pci_bus 0000:07: extended config space not accessible [ 2.496226] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 2.504217] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 2.508209] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 2.516209] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 2.524247] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.532312] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 2.536205] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 2.544207] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 2.552201] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 2.560201] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 2.568201] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 2.576201] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 2.588201] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 2.596201] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 2.604201] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 2.612201] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 2.624997] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 2.628205] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.640219] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 2.648201] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 2.656268] PCI host bridge to bus 0000:ff [ 2.660202] pci_bus 0000:ff: root bus resource [bus ff] [ 2.664214] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 2.672280] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 2.676269] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 2.684260] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 2.688264] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 2.696262] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 2.700267] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 2.708258] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 2.716259] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 2.720260] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 2.728261] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 2.732257] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 2.740261] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 2.744263] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 2.752277] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 2.756289] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 2.764283] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 2.768283] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 2.776284] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 2.780282] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 2.788285] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 2.792283] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 2.800295] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 2.804284] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 2.812283] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 2.816285] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 2.824284] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 2.828283] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 2.836281] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 2.840260] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 2.848265] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 2.852261] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 2.860263] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 2.864260] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 2.872258] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 2.880421] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 2.884255] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 2.892252] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 2.896251] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 2.904252] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 2.908251] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 2.916262] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 2.920252] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 2.929834] iommu: Default domain type: Translated [ 2.932201] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.940302] pps_core: LinuxPPS API ver. 1 registered [ 2.944201] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.952203] PTP clock support registered [ 2.956139] EDAC MC: Ver: 3.0.0 [ 2.960460] NetLabel: Initializing [ 2.963868] NetLabel: domain hash size = 128 [ 2.968203] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 2.976223] NetLabel: unlabeled traffic allowed by default [ 2.980201] PCI: Using ACPI for IRQ routing [ 2.991169] PCI: pci_cache_line_size set to 64 bytes [ 2.991295] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] [ 2.991298] e820: reserve RAM buffer [mem 0x7de2c000-0x7fffffff] [ 2.992239] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 2.996199] pci 0000:07:01.0: vgaarb: bridge control possible [ 2.996199] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.012209] vgaarb: loaded [ 3.016918] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 3.024201] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 3.032200] clocksource: Switched to clocksource tsc-early [ 3.037895] VFS: Disk quotas dquot_6.6.0 [ 3.041839] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.048906] AppArmor: AppArmor Filesystem Enabled [ 3.053644] pnp: PnP ACPI init [ 3.056844] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 3.063463] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 3.070072] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 3.076685] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 3.083425] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 3.090529] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 3.096455] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 3.103737] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 3.109864] pnp 00:07: [dma 0 disabled] [ 3.110106] pnp 00:08: [dma 0 disabled] [ 3.110386] system 00:09: [io 0x0400-0x0453] has been reserved [ 3.116313] system 00:09: [io 0x0458-0x047f] has been reserved [ 3.122229] system 00:09: [io 0x1180-0x119f] has been reserved [ 3.128148] system 00:09: [io 0x0500-0x057f] has been reserved [ 3.134068] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 3.140680] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 3.147641] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 3.154361] system 00:0a: [io 0x0454-0x0457] has been reserved [ 3.160562] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 3.167798] pnp: PnP ACPI: found 12 devices [ 3.178496] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.187458] NET: Registered PF_INET protocol family [ 3.192516] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 3.202851] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 3.211422] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.219254] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 3.227554] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 3.235349] TCP: Hash tables configured (established 65536 bind 65536) [ 3.241973] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 3.249528] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.256356] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.263649] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.269322] NET: Registered PF_XDP protocol family [ 3.274134] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.279114] pci 0000:00:01.1: PCI bridge to [bus 02] [ 3.284088] pci 0000:00:03.0: PCI bridge to [bus 03] [ 3.289064] pci 0000:00:11.0: PCI bridge to [bus 04] [ 3.294031] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 3.300127] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.307879] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 3.312846] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 3.318941] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 3.325731] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 3.330698] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 3.336793] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 3.343586] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 3.348553] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 3.355338] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.363081] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 3.369264] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 3.375445] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 3.381623] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 3.387803] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.394674] pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.401548] pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.408507] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.415468] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 3.421040] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.428260] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 3.433834] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 3.440098] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 3.445670] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 3.451936] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 3.458202] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.465421] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 3.471602] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 3.477780] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 3.483960] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 3.490140] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.497011] pci_bus 0000:07: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.503884] pci_bus 0000:07: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.510843] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.517896] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 3.549575] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 24034 usecs [ 3.581561] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 23991 usecs [ 3.589065] PCI: CLS 64 bytes, default 64 [ 3.593119] DMAR: No SATC found [ 3.593178] Trying to unpack rootfs image as initramfs... [ 3.596265] DMAR: dmar0: Using Queued invalidation [ 3.596343] pci 0000:00:00.0: Adding to iommu group 0 [ 3.611579] pci 0000:00:01.0: Adding to iommu group 1 [ 3.616657] pci 0000:00:01.1: Adding to iommu group 2 [ 3.621743] pci 0000:00:03.0: Adding to iommu group 3 [ 3.626823] pci 0000:00:04.0: Adding to iommu group 4 [ 3.631903] pci 0000:00:04.1: Adding to iommu group 5 [ 3.636985] pci 0000:00:04.2: Adding to iommu group 6 [ 3.642073] pci 0000:00:04.3: Adding to iommu group 7 [ 3.647156] pci 0000:00:04.4: Adding to iommu group 8 [ 3.652234] pci 0000:00:04.5: Adding to iommu group 9 [ 3.657315] pci 0000:00:04.6: Adding to iommu group 10 [ 3.662480] pci 0000:00:04.7: Adding to iommu group 11 [ 3.667645] pci 0000:00:05.0: Adding to iommu group 12 [ 3.672811] pci 0000:00:05.2: Adding to iommu group 13 [ 3.677977] pci 0000:00:05.4: Adding to iommu group 14 [ 3.683140] pci 0000:00:11.0: Adding to iommu group 15 [ 3.688329] pci 0000:00:16.0: Adding to iommu group 16 [ 3.693499] pci 0000:00:16.1: Adding to iommu group 16 [ 3.698669] pci 0000:00:1a.0: Adding to iommu group 17 [ 3.703847] pci 0000:00:1c.0: Adding to iommu group 18 [ 3.709016] pci 0000:00:1c.1: Adding to iommu group 19 [ 3.714184] pci 0000:00:1d.0: Adding to iommu group 20 [ 3.719355] pci 0000:00:1e.0: Adding to iommu group 21 [ 3.724570] pci 0000:00:1f.0: Adding to iommu group 22 [ 3.729734] pci 0000:00:1f.2: Adding to iommu group 22 [ 3.734899] pci 0000:00:1f.3: Adding to iommu group 22 [ 3.740063] pci 0000:00:1f.6: Adding to iommu group 22 [ 3.745240] pci 0000:04:00.0: Adding to iommu group 23 [ 3.750414] pci 0000:05:00.0: Adding to iommu group 24 [ 3.755577] pci 0000:06:00.0: Adding to iommu group 25 [ 3.760725] pci 0000:07:01.0: Adding to iommu group 21 [ 3.765910] pci 0000:ff:08.0: Adding to iommu group 26 [ 3.771092] pci 0000:ff:09.0: Adding to iommu group 27 [ 3.776300] pci 0000:ff:0a.0: Adding to iommu group 28 [ 3.781472] pci 0000:ff:0a.1: Adding to iommu group 28 [ 3.786644] pci 0000:ff:0a.2: Adding to iommu group 28 [ 3.791818] pci 0000:ff:0a.3: Adding to iommu group 28 [ 3.797013] pci 0000:ff:0b.0: Adding to iommu group 29 [ 3.802183] pci 0000:ff:0b.3: Adding to iommu group 29 [ 3.807375] pci 0000:ff:0c.0: Adding to iommu group 30 [ 3.812547] pci 0000:ff:0c.1: Adding to iommu group 30 [ 3.817746] pci 0000:ff:0d.0: Adding to iommu group 31 [ 3.822912] pci 0000:ff:0d.1: Adding to iommu group 31 [ 3.828106] pci 0000:ff:0e.0: Adding to iommu group 32 [ 3.833281] pci 0000:ff:0e.1: Adding to iommu group 32 [ 3.838449] pci 0000:ff:0f.0: Adding to iommu group 33 [ 3.843615] pci 0000:ff:0f.1: Adding to iommu group 34 [ 3.848779] pci 0000:ff:0f.2: Adding to iommu group 35 [ 3.853947] pci 0000:ff:0f.3: Adding to iommu group 36 [ 3.859111] pci 0000:ff:0f.4: Adding to iommu group 37 [ 3.864276] pci 0000:ff:0f.5: Adding to iommu group 38 [ 3.869445] pci 0000:ff:10.0: Adding to iommu group 39 [ 3.874617] pci 0000:ff:10.1: Adding to iommu group 40 [ 3.879782] pci 0000:ff:10.2: Adding to iommu group 41 [ 3.884946] pci 0000:ff:10.3: Adding to iommu group 42 [ 3.890113] pci 0000:ff:10.4: Adding to iommu group 43 [ 3.895282] pci 0000:ff:10.5: Adding to iommu group 44 [ 3.900453] pci 0000:ff:10.6: Adding to iommu group 45 [ 3.905636] pci 0000:ff:10.7: Adding to iommu group 46 [ 3.910846] pci 0000:ff:13.0: Adding to iommu group 47 [ 3.916026] pci 0000:ff:13.1: Adding to iommu group 47 [ 3.921195] pci 0000:ff:13.4: Adding to iommu group 47 [ 3.926371] pci 0000:ff:13.5: Adding to iommu group 47 [ 3.931576] pci 0000:ff:16.0: Adding to iommu group 48 [ 3.936754] pci 0000:ff:16.1: Adding to iommu group 48 [ 3.941931] pci 0000:ff:16.2: Adding to iommu group 48 [ 3.950951] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 3.957407] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.963848] software IO TLB: mapped [mem 0x0000000079e2c000-0x000000007de2c000] (64MB) [ 3.972330] Initialise system trusted keyrings [ 3.976796] Key type blacklist registered [ 3.980887] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 3.989163] zbud: loaded [ 3.992022] integrity: Platform Keyring initialized [ 3.996914] integrity: Machine keyring initialized [ 4.001707] Key type asymmetric registered [ 4.005802] Asymmetric key parser 'x509' registered [ 4.039195] Freeing initrd memory: 40392K [ 4.050716] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 4.056500] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 4.063939] io scheduler mq-deadline registered [ 4.070917] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.077732] Monitor-Mwait will be used to enter C-1 state [ 4.077746] Monitor-Mwait will be used to enter C-2 state [ 4.077753] ACPI: \_SB_.SCK0.C000: Found 2 idle states [ 4.087928] ERST: Error Record Serialization Table (ERST) support is initialized. [ 4.095416] pstore: Registered erst as persistent store backend [ 4.101512] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.107953] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.116054] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.124282] Linux agpgart interface v0.103 [ 4.128527] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 4.137662] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 4.144543] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 4.154340] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.159312] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.164547] mousedev: PS/2 mouse device common for all mice [ 4.170163] rtc_cmos 00:02: RTC can wake from S4 [ 4.175059] rtc_cmos 00:02: registered as rtc0 [ 4.179546] rtc_cmos 00:02: setting system clock to 2024-09-15T17:36:43 UTC (1726421803) [ 4.187669] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.195492] intel_pstate: Intel P-state driver initializing [ 4.201384] ledtrig-cpu: registered to indicate activity on CPUs [ 4.225901] NET: Registered PF_INET6 protocol family [ 4.239522] Segment Routing with IPv6 [ 4.243215] In-situ OAM (IOAM) with IPv6 [ 4.247180] mip6: Mobile IPv6 [ 4.250156] NET: Registered PF_PACKET protocol family [ 4.255291] mpls_gso: MPLS GSO support [ 4.259567] microcode: sig=0x306e4, pf=0x8, revision=0x42e [ 4.265116] microcode: Microcode Update Driver: v2.2. [ 4.265125] IPI shorthand broadcast: enabled [ 4.274483] sched_clock: Marking stable (3284991514, 989458406)->(4644317462, -369867542) [ 4.282936] registered taskstats version 1 [ 4.287054] Loading compiled-in X.509 certificates [ 4.331620] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.340353] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 4.351021] zswap: loaded using pool lzo/zbud [ 4.355635] Key type .fscrypt registered [ 4.359565] Key type fscrypt-provisioning registered [ 4.364840] pstore: Using crash dump compression: deflate [ 4.378313] Key type encrypted registered [ 4.382359] AppArmor: AppArmor sha1 policy hashing enabled [ 4.387853] ima: No TPM chip found, activating TPM-bypass! [ 4.393336] ima: Allocated hash algorithm: sha256 [ 4.398056] ima: No architecture policies found [ 4.402602] evm: Initialising EVM extended attributes: [ 4.407738] evm: security.selinux [ 4.411057] evm: security.SMACK64 (disabled) [ 4.415330] evm: security.SMACK64EXEC (disabled) [ 4.419948] evm: security.SMACK64TRANSMUTE (disabled) [ 4.425003] evm: security.SMACK64MMAP (disabled) [ 4.429622] evm: security.apparmor [ 4.433025] evm: security.ima [ 4.435992] evm: security.capability [ 4.439570] evm: HMAC attrs: 0x1 [ 4.620363] clk: Disabling unused clocks [ 4.625968] Freeing unused decrypted memory: 2036K [ 4.631402] Freeing unused kernel image (initmem) memory: 2796K [ 4.637407] Write protecting the kernel read-only data: 26624k [ 4.643933] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 4.650868] Freeing unused kernel image (rodata/data gap) memory: 1168K [ 4.740389] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.746825] x86/mm: Checking user space page tables [ 4.827096] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.833542] Run /init as init process [ 4.837208] with arguments: [ 4.837210] /init [ 4.837211] with environment: [ 4.837213] HOME=/ [ 4.837214] TERM=linux [ 4.837215] BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 [ 4.989488] tsc: Refined TSC clocksource calibration: 1799.999 MHz [ 4.995682] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 5.005692] clocksource: Switched to clocksource tsc [ 5.064371] e1000e: Intel(R) PRO/1000 Network Driver [ 5.069344] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 5.075594] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.075719] SCSI subsystem initialized [ 5.089057] ACPI: bus type USB registered [ 5.093115] usbcore: registered new interface driver usbfs [ 5.098613] usbcore: registered new interface driver hub [ 5.103949] usbcore: registered new device driver usb [ 5.113536] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 5.119446] i2c i2c-0: 1/6 memory slots populated (from DMI) [ 5.125112] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 5.138925] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.148939] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.156496] ehci-pci 0000:00:1a.0: debug port 2 [ 5.156691] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 5.161510] libata version 3.00 loaded. [ 5.168394] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 5.181557] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.187383] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.187661] ahci 0000:00:1f.2: version 3.0 [ 5.195654] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.195658] usb usb1: Product: EHCI Host Controller [ 5.207756] usb usb1: Manufacturer: Linux 6.1.0-25-amd64 ehci_hcd [ 5.213223] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 5.213848] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.214039] hub 1-0:1.0: USB hub found [ 5.222030] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 5.226384] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a6 [ 5.226668] hub 1-0:1.0: 2 ports detected [ 5.230411] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 5.230494] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.238781] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.246575] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.250361] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.285914] ehci-pci 0000:00:1d.0: debug port 2 [ 5.290584] scsi host0: ahci [ 5.290986] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 5.293951] scsi host1: ahci [ 5.294425] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 5.299934] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 5.303125] scsi host2: ahci [ 5.317512] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.320654] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 5.324246] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.327518] isci 0000:04:00.0: OEM parameter table found in OROM [ 5.327523] isci 0000:04:00.0: OEM SAS parameters (version: 1.0) loaded (platform) [ 5.332079] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 5.332530] scsi host3: ahci [ 5.333031] scsi host5: ahci [ 5.333504] scsi host6: ahci [ 5.333665] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 32 [ 5.333669] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 32 [ 5.333672] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 32 [ 5.333674] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 32 [ 5.333677] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 32 [ 5.333679] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 32 [ 5.340167] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.340170] usb usb2: Product: EHCI Host Controller [ 5.348932] scsi host4: isci [ 5.353743] usb usb2: Manufacturer: Linux 6.1.0-25-amd64 ehci_hcd [ 5.353745] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.353937] hub 2-0:1.0: USB hub found [ 5.382829] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a7 [ 5.385775] hub 2-0:1.0: 2 ports detected [ 5.393169] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 5.393251] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.525530] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.648543] ata4: SATA link down (SStatus 0 SControl 300) [ 5.653977] ata2: SATA link down (SStatus 0 SControl 300) [ 5.659405] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.665624] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.665627] ata3: SATA link down (SStatus 0 SControl 300) [ 5.677606] ata6: SATA link down (SStatus 0 SControl 300) [ 5.683024] ata5: SATA link down (SStatus 0 SControl 300) [ 5.688520] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 5.695629] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.702947] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.711140] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.718392] ata1.00: configured for UDMA/133 [ 5.722739] scsi: waiting for bus probes to complete ... [ 5.722913] hub 1-1:1.0: USB hub found [ 5.731958] hub 1-1:1.0: 6 ports detected [ 5.789765] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 5.800161] e1000e 0000:05:00.0 enx002590eb25a6: renamed from eth0 [ 5.824151] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.825918] e1000e 0000:06:00.0 enx002590eb25a7: renamed from eth1 [ 5.831854] sd 0:0:0:0: [sda] Write Protect is off [ 5.842795] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.842975] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.852057] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 5.858267] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.866448] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.873897] hub 2-1:1.0: USB hub found [ 5.877844] hub 2-1:1.0: 8 ports detected [ 5.887004] sda: sda1 sda2 < sda5 > [ 5.890850] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.065514] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 6.186982] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 6.195392] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.202721] usb 1-1.1: Product: Hermon USB hidmouse Device [ 6.208214] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 6.221061] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.233278] device-mapper: uevent: version 1.0.3 [ 6.237988] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 6.238698] hid: raw HID events driver (C) Jiri Kosina [ 6.257931] usbcore: registered new interface driver usbhid [ 6.263514] usbhid: USB HID core driver [ 6.269855] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input3 [ 6.284683] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 6.299625] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input4 [ 6.437621] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 6.776049] PM: Image not found (code -22) [ 7.148883] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 7.160418] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 7.341574] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 8.934046] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 8.957525] ACPI: button: Power Button [PWRB] [ 8.961984] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 8.969431] ACPI: button: Power Button [PWRF] [ 9.106653] dca service started, version 1.12.1 [ 9.212995] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 9.236869] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 9.263074] IPMI message handler: version 39.2 [ 9.299291] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.304799] ipmi device interface [ 9.456861] iTCO_vendor_support: vendor-support=0 [ 9.465841] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 9.509624] ipmi_si: IPMI System Interface driver [ 9.514387] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 9.520772] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 9.528011] ipmi_si: Adding SMBIOS-specified kcs state machine [ 9.533927] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 9.540008] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 9.550554] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 9.582928] ACPI: bus type drm_connector registered [ 9.589601] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 9.597538] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 9.603286] RAPL PMU: hw unit of domain package 2^-16 Joules [ 9.608945] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 9.629673] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 9.638392] ipmi_si: Adding ACPI-specified kcs state machine [ 9.644370] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 9.654520] cryptd: max_cpu_qlen set to 1000 [ 9.745151] mgag200 0000:07:01.0: vgaarb: deactivate vga console [ 9.756217] Console: switching to colour dummy device 80x25 [ 9.762980] AVX version of gcm_enc/dec engaged. [ 9.767699] AES CTR mode by8 optimization enabled [ 9.769411] [drm] Initialized mgag200 1.0.0 20110418 for 0000:07:01.0 on minor 0 [ 9.781708] fbcon: mgag200drmfb (fb0) is primary device [ 9.813655] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 9.868709] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x0703, dev_id: 0x20) [ 9.908221] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 9.965032] ipmi_ssif: IPMI SSIF Interface driver [ 10.152707] Console: switching to colour frame buffer device 128x48 [ 10.265403] mgag200 0000:07:01.0: [drm] fb0: mgag200drmfb frame buffer device [ 10.474402] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.474430] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.474438] EDAC sbridge: Seeking for: PCI ID 8086:0e60 [ 10.474446] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.474454] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.474458] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.474466] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.474470] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.474478] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.474482] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.474490] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.474493] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.474502] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.474505] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.474514] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.474517] EDAC sbridge: Seeking for: PCI ID 8086:0e68 [ 10.474525] EDAC sbridge: Seeking for: PCI ID 8086:0e79 [ 10.474532] EDAC sbridge: Seeking for: PCI ID 8086:0e6a [ 10.474540] EDAC sbridge: Seeking for: PCI ID 8086:0e6b [ 10.474548] EDAC sbridge: Seeking for: PCI ID 8086:0e6c [ 10.474555] EDAC sbridge: Seeking for: PCI ID 8086:0e6d [ 10.474563] EDAC sbridge: Seeking for: PCI ID 8086:0eb8 [ 10.474570] EDAC sbridge: Seeking for: PCI ID 8086:0ebc [ 10.474578] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.474587] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.474590] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.474599] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.474602] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.474611] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.474752] EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT) [ 10.485802] EDAC sbridge: Ver: 1.1.2 [ 10.550725] intel_rapl_common: Found RAPL domain package [ 10.556052] intel_rapl_common: Found RAPL domain core [ 10.561199] intel_rapl_common: Found RAPL domain dram [ 11.504568] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 12.689626] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 12.720721] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 12.777596] Adding 1949692k swap on /dev/mapper/fiano1--vg-swap_1. Priority:-2 extents:1 across:1949692k FS [ 13.372978] audit: type=1400 audit(1726421812.720:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1068 comm="apparmor_parser" [ 13.388199] audit: type=1400 audit(1726421812.720:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1069 comm="apparmor_parser" [ 13.403591] audit: type=1400 audit(1726421812.724:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1069 comm="apparmor_parser" [ 13.433278] audit: type=1400 audit(1726421812.780:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1071 comm="apparmor_parser" [ 13.448404] audit: type=1400 audit(1726421812.784:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1071 comm="apparmor_parser" [ 13.463336] audit: type=1400 audit(1726421812.784:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1071 comm="apparmor_parser" [ 13.622750] audit: type=1400 audit(1726421812.972:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=1079 comm="apparmor_parser" [ 13.638045] audit: type=1400 audit(1726421812.984:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1070 comm="apparmor_parser" [ 13.656015] audit: type=1400 audit(1726421812.984:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1070 comm="apparmor_parser" [ 13.673465] audit: type=1400 audit(1726421812.988:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1070 comm="apparmor_parser" [ 16.806562] e1000e 0000:05:00.0 enx002590eb25a6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 16.816282] IPv6: ADDRCONF(NETDEV_CHANGE): enx002590eb25a6: link becomes ready