[ 0.000000] Linux version 6.1.110+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Mon Sep 16 02:23:26 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000458] tsc: Detected 2200.000 MHz processor [ 0.000891] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000894] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000901] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000903] Disabled [ 0.000903] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000907] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000947] Kernel/User page tables isolation: disabled on XEN PV. [ 0.028155] RAMDISK: [mem 0x04000000-0x05424fff] [ 0.028164] ACPI: Early table checksum verification disabled [ 0.028762] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028774] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028811] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028865] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028881] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028897] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028913] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028929] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028945] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028960] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028977] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028993] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.029009] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.029027] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.029043] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.029059] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.029075] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.029091] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.029107] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.029123] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.029139] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.029155] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.029163] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.029165] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.029166] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.029167] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.029168] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.029169] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.029170] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.029171] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.029172] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.029173] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.029174] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.029175] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.029176] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.029177] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.029178] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.029179] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.029180] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.029181] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.029182] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.029183] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.029228] Setting APIC routing to Xen PV. [ 0.033146] Zone ranges: [ 0.033147] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.033150] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.033151] Normal empty [ 0.033153] Movable zone start for each node [ 0.033153] Early memory node ranges [ 0.033154] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.033155] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.033157] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.033162] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.033198] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034757] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034762] p2m virtual area at (____ptrval____), size is 40000000 [ 0.222285] Remapped 102 page(s) [ 0.223651] ACPI: PM-Timer IO Port: 0x408 [ 0.223704] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223707] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223709] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223710] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223711] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223713] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223714] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223716] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223745] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223758] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223761] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223787] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223792] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223860] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223875] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223877] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223878] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223880] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223885] Booting kernel on Xen [ 0.223886] Xen version: 4.19.1-pre (preserve-AD) [ 0.223889] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.230148] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.230432] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.230438] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.230442] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230520] xen: PV spinlocks enabled [ 0.230523] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230528] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230530] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230568] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230577] random: crng init done [ 0.230626] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230651] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231968] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231971] software IO TLB: area num 8. [ 0.291390] Memory: 389288K/524284K available (14349K kernel code, 2686K rwdata, 4584K rodata, 1580K init, 1288K bss, 134744K reserved, 0K cma-reserved) [ 0.291558] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.294072] Dynamic Preempt: voluntary [ 0.294171] rcu: Preemptible hierarchical RCU implementation. [ 0.294172] rcu: RCU event tracing is enabled. [ 0.294172] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.294174] Trampoline variant of Tasks RCU enabled. [ 0.294175] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.294176] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.304644] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.304768] xen:events: Using FIFO-based ABI [ 0.304791] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.304799] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.304807] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.304814] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.304821] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.304829] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.304836] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.304843] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.304851] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.304858] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.304866] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.304873] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.304881] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.304890] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.304897] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.304908] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.310263] Console: colour VGA+ 80x25 [ 0.325022] printk: console [tty0] enabled [ 0.326354] printk: console [hvc0] enabled [ 0.326493] ACPI: Core revision 20220331 [ 0.341978] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.342142] Xen: using vcpuop timer interface [ 0.342150] installing Xen timer for CPU 0 [ 0.342299] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb633008a4, max_idle_ns: 440795292230 ns [ 0.342459] Calibrating delay loop (skipped), value calculated using timer frequency.. 4400.00 BogoMIPS (lpj=2200000) [ 0.342787] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.342904] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.343032] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.343181] Spectre V2 : Mitigation: Retpolines [ 0.343465] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.343622] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.343741] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.343862] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.344010] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.344128] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.344281] MDS: Mitigation: Clear CPU buffers [ 0.344394] TAA: Mitigation: Clear CPU buffers [ 0.344462] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.344628] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.344774] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.344926] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.345045] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.345164] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.362866] Freeing SMP alternatives memory: 40K [ 0.362993] pid_max: default: 32768 minimum: 301 [ 0.363480] LSM: Security Framework initializing [ 0.363602] SELinux: Initializing. [ 0.363744] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363891] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364550] cpu 0 spinlock event irq 25 [ 0.364670] VPMU disabled by hypervisor. [ 0.365104] cblist_init_generic: Setting adjustable number of callback queues. [ 0.365250] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.365407] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.365463] signal: max sigframe size: 1776 [ 0.365625] rcu: Hierarchical SRCU implementation. [ 0.365759] rcu: Max phase no-delay instances is 400. [ 0.366248] smp: Bringing up secondary CPUs ... [ 0.366580] installing Xen timer for CPU 1 [ 0.367046] cpu 1 spinlock event irq 35 [ 0.367599] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.367768] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.367957] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.368682] installing Xen timer for CPU 2 [ 0.369151] cpu 2 spinlock event irq 41 [ 0.369550] installing Xen timer for CPU 3 [ 0.369999] cpu 3 spinlock event irq 47 [ 0.369999] installing Xen timer for CPU 4 [ 0.370798] cpu 4 spinlock event irq 53 [ 0.370798] installing Xen timer for CPU 5 [ 0.371629] cpu 5 spinlock event irq 59 [ 0.371664] installing Xen timer for CPU 6 [ 0.372501] cpu 6 spinlock event irq 65 [ 0.372710] installing Xen timer for CPU 7 [ 0.373138] cpu 7 spinlock event irq 71 [ 0.373655] smp: Brought up 1 node, 8 CPUs [ 0.373780] smpboot: Max logical packages: 1 [ 0.373997] devtmpfs: initialized [ 0.373997] x86/mm: Memory block size: 128MB [ 0.374690] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.374724] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.374884] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.375136] PM: RTC time: 02:49:29, date: 2024-09-16 [ 0.375700] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.375846] xen:grant_table: Grant tables using version 1 layout [ 0.375983] Grant table initialized [ 0.376285] audit: initializing netlink subsys (disabled) [ 0.376482] audit: type=2000 audit(1726454969.968:1): state=initialized audit_enabled=0 res=1 [ 0.376533] thermal_sys: Registered thermal governor 'step_wise' [ 0.376533] thermal_sys: Registered thermal governor 'user_space' [ 0.376666] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.377092] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.377469] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.503808] PCI: Using configuration type 1 for base access [ 0.506510] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.506684] ACPI: Added _OSI(Module Device) [ 0.507464] ACPI: Added _OSI(Processor Device) [ 0.507578] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.507692] ACPI: Added _OSI(Processor Aggregator Device) [ 0.537658] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.539649] xen: registering gsi 9 triggering 0 polarity 0 [ 0.542225] ACPI: Dynamic OEM Table Load: [ 0.549441] ACPI: Interpreter enabled [ 0.549482] ACPI: PM: (supports S0 S4 S5) [ 0.549596] ACPI: Using IOAPIC for interrupt routing [ 0.549744] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.549895] PCI: Using E820 reservations for host bridge windows [ 0.550689] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.576087] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.576217] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.576454] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.576720] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.576841] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.577016] PCI host bridge to bus 0000:ff [ 0.577129] pci_bus 0000:ff: root bus resource [bus ff] [ 0.577322] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.577784] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.578404] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.578766] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.579203] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.579628] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.580057] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.580480] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.581126] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.581565] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.582186] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.582612] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.583037] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.583456] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.583894] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.584314] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.584737] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.585160] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.585412] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.585999] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.586480] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.586946] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.587413] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.587809] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.588273] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.588936] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.589359] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.589954] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.590420] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.590834] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.591302] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.591760] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.592204] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.592629] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.593051] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.593532] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.593998] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.594462] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.594928] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.595441] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.595764] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.596382] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.596772] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.597020] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.597651] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.598077] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.598505] pci_bus 0000:ff: on NUMA node 0 [ 0.601991] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.602119] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.602396] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.602457] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.602457] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.603534] PCI host bridge to bus 0000:00 [ 0.603649] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.603771] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.603891] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.604036] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.604375] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.604525] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.605172] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.605693] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.606093] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.606611] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.606999] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.607515] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.607865] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.608578] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.608956] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.609480] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.609843] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.610361] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.610712] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.611478] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.612293] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.612960] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.613178] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.613636] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.613979] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.614197] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.614670] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.614971] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.615188] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.615652] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.616183] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.616381] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.616876] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.617201] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.617632] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.617836] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.617963] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.625646] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.626201] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.626398] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.626470] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.626763] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.627315] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.627510] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.627632] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.627919] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.628477] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.628671] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.628792] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.629115] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.629312] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.629851] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.630172] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.630929] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.631123] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.631281] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.631438] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.631503] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.631660] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.631817] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.632130] pci 0000:00:1f.2: PME# supported from D3hot [ 0.632411] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.632559] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.632803] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.633181] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.633403] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.634050] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.634344] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.634678] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.634890] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.635640] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.635853] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.636561] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.636773] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.637479] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.637692] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.638386] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.638480] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.638819] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.639032] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.639316] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.639501] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.639850] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.640071] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.640225] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.640429] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.640461] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.641031] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.641244] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.641536] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.641720] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.642067] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.642269] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.642390] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.642511] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.642632] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.643193] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.643327] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.643466] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.643756] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.644048] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.644428] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.644462] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.644668] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.644884] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.645049] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.645578] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.646039] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.646165] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.646293] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.646645] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.646771] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.646982] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.647198] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.647363] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.647871] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.648340] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.648466] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.648595] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.648932] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.649323] pci 0000:09:00.0: enabling Extended Tags [ 0.649668] pci 0000:09:00.0: supports D1 D2 [ 0.649782] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.650135] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.650262] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.650390] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.650643] pci_bus 0000:0a: extended config space not accessible [ 0.650814] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.651019] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.651186] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.651353] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.651697] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.651987] pci 0000:0a:00.0: supports D1 D2 [ 0.652100] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.652541] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.652679] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.652809] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.653194] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.653394] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.653555] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.653716] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.654230] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.654461] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.654606] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.654824] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.655002] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.655541] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.655742] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.655951] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.656112] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.656627] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.656859] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.657004] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.657222] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.657366] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.657851] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.658051] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.658260] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.658421] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.658876] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.659105] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.659249] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.659468] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.659613] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.660129] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.660336] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.660546] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.660707] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.661215] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.661443] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.661461] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.661692] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.661837] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.662416] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.662472] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.662600] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.662740] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.663213] pci_bus 0000:00: on NUMA node 0 [ 0.663308] xen: registering gsi 13 triggering 1 polarity 0 [ 0.664260] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.664455] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.664645] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.664835] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.665025] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.665143] ACPI: PCI: Interrupt link LNKE disabled [ 0.665326] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.665444] ACPI: PCI: Interrupt link LNKF disabled [ 0.665533] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.665651] ACPI: PCI: Interrupt link LNKG disabled [ 0.665835] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.665952] ACPI: PCI: Interrupt link LNKH disabled [ 0.666218] xen:balloon: Initialising balloon driver [ 0.666553] iommu: Default domain type: Translated [ 0.674463] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.674646] SCSI subsystem initialized [ 0.674773] libata version 3.00 loaded. [ 0.674773] ACPI: bus type USB registered [ 0.674773] usbcore: registered new interface driver usbfs [ 0.674773] usbcore: registered new interface driver hub [ 0.674883] usbcore: registered new device driver usb [ 0.675009] pps_core: LinuxPPS API ver. 1 registered [ 0.675461] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.675613] PTP clock support registered [ 0.675748] Advanced Linux Sound Architecture Driver Initialized. [ 0.675753] NetLabel: Initializing [ 0.675865] NetLabel: domain hash size = 128 [ 0.675977] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.676478] NetLabel: unlabeled traffic allowed by default [ 0.676618] PCI: Using ACPI for IRQ routing [ 0.711765] PCI: pci_cache_line_size set to 64 bytes [ 0.712540] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.712543] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.712566] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.712652] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.712770] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.712918] vgaarb: loaded [ 0.715044] clocksource: Switched to clocksource tsc-early [ 0.722872] VFS: Disk quotas dquot_6.6.0 [ 0.723007] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.723154] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.723317] pnp: PnP ACPI init [ 0.723822] xen: registering gsi 8 triggering 1 polarity 0 [ 0.723985] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.724110] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.724229] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.724347] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.724477] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.724612] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.724740] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.724861] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.724981] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.725101] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.725221] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.725341] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.725474] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.725892] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.726023] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.726141] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.726259] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.726377] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.726820] xen: registering gsi 4 triggering 1 polarity 0 [ 0.726824] Already setup the GSI :4 [ 0.726937] pnp 00:03: [dma 0 disabled] [ 0.727249] xen: registering gsi 3 triggering 1 polarity 0 [ 0.727260] pnp 00:04: [dma 0 disabled] [ 0.727837] pnp: PnP ACPI: found 5 devices [ 0.759883] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.760038] NET: Registered PF_INET protocol family [ 0.760198] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.760600] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.760794] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.760940] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.761091] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.761260] TCP: Hash tables configured (established 4096 bind 4096) [ 0.761402] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.761573] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.761755] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.762188] RPC: Registered named UNIX socket transport module. [ 0.762314] RPC: Registered udp transport module. [ 0.762428] RPC: Registered tcp transport module. [ 0.762570] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.763093] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.763262] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.763430] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.763619] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.763766] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.763941] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.764114] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.764248] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.764409] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.764557] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.764705] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.764854] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.764999] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.765121] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.765266] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.765410] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.765582] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.765706] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.765851] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.765994] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.766139] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.766267] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.766412] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.766567] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.766712] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.766847] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.766980] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.767151] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.767323] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.767510] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.767648] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.767788] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.767949] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.768068] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.768206] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.768368] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.768507] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.768664] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.768831] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.768951] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.769121] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.769285] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.769443] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.769618] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.769772] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.769925] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.770078] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.770231] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.770392] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.770556] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.770676] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.770815] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.770949] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.771121] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.771271] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.771390] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.771529] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.771653] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.771782] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.771901] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.772020] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.772164] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.772279] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.772398] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.772536] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.772666] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.772782] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.772901] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.773017] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.773141] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.773267] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.773386] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.773942] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.774157] xen: registering gsi 19 triggering 0 polarity 1 [ 0.774183] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.782961] xen: registering gsi 18 triggering 0 polarity 1 [ 0.782983] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.798675] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 15397 usecs [ 0.798918] xen: registering gsi 18 triggering 0 polarity 1 [ 0.798924] Already setup the GSI :18 [ 0.815647] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 16389 usecs [ 0.815858] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.816031] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.816106] Unpacking initramfs... [ 0.816151] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.816496] kvm: no hardware support for 'kvm_intel' [ 0.824351] has_svm: not amd or hygon [ 0.824474] kvm: no hardware support for 'kvm_amd' [ 0.824603] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb633008a4, max_idle_ns: 440795292230 ns [ 0.824833] clocksource: Switched to clocksource tsc [ 0.827415] Initialise system trusted keyrings [ 0.827777] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.829253] NFS: Registering the id_resolver key type [ 0.829381] Key type id_resolver registered [ 0.829493] Key type id_legacy registered [ 0.829707] 9p: Installing v9fs 9p2000 file system support [ 0.843713] Key type asymmetric registered [ 0.843839] Asymmetric key parser 'x509' registered [ 0.843977] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.844134] io scheduler mq-deadline registered [ 0.844248] io scheduler kyber registered [ 0.845184] xen: registering gsi 16 triggering 0 polarity 1 [ 0.845214] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.845796] xen: registering gsi 16 triggering 0 polarity 1 [ 0.845802] Already setup the GSI :16 [ 0.846413] xen: registering gsi 16 triggering 0 polarity 1 [ 0.846418] Already setup the GSI :16 [ 0.846761] xen: registering gsi 16 triggering 0 polarity 1 [ 0.846766] Already setup the GSI :16 [ 0.847083] xen: registering gsi 16 triggering 0 polarity 1 [ 0.847087] Already setup the GSI :16 [ 0.847701] xen: registering gsi 16 triggering 0 polarity 1 [ 0.847706] Already setup the GSI :16 [ 0.848299] xen: registering gsi 16 triggering 0 polarity 1 [ 0.848304] Already setup the GSI :16 [ 0.848763] xen: registering gsi 17 triggering 0 polarity 1 [ 0.848779] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.849114] xen: registering gsi 19 triggering 0 polarity 1 [ 0.849119] Already setup the GSI :19 [ 0.849569] xen: registering gsi 16 triggering 0 polarity 1 [ 0.849574] Already setup the GSI :16 [ 0.850235] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.850409] ACPI: button: Power Button [PWRB] [ 0.850569] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.850800] ACPI: button: Power Button [PWRF] [ 0.851087] Monitor-Mwait will be used to enter C-1 state [ 0.851124] Monitor-Mwait will be used to enter C-2 state [ 0.851140] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.851537] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.851859] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.852280] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.852798] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.853328] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.853799] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.854333] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.855083] xen:xen_evtchn: Event-channel device installed [ 0.855282] xen_pciback: backend is vpci [ 0.856009] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.856316] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.857057] hpet_acpi_add: no address or irqs in _CRS [ 0.857268] Non-volatile memory driver v1.3 [ 0.857382] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.860069] loop: module loaded [ 0.866306] ahci 0000:00:1f.2: version 3.0 [ 0.866408] xen: registering gsi 16 triggering 0 polarity 1 [ 0.866418] Already setup the GSI :16 [ 0.866785] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.866936] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.882221] scsi host0: ahci [ 0.882592] scsi host1: ahci [ 0.882899] scsi host2: ahci [ 0.883230] scsi host3: ahci [ 0.883619] scsi host4: ahci [ 0.883948] scsi host5: ahci [ 0.884095] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 74 [ 0.884241] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 74 [ 0.884386] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 74 [ 0.884538] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 74 [ 0.884700] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 74 [ 0.884845] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 74 [ 0.885312] tun: Universal TUN/TAP device driver, 1.6 [ 0.885590] e100: Intel(R) PRO/100 Network Driver [ 0.885740] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.885882] sky2: driver version 1.30 [ 0.886076] xen_netfront: Initialising Xen virtual ethernet driver [ 0.886418] xen: registering gsi 18 triggering 0 polarity 1 [ 0.886427] Already setup the GSI :18 [ 0.886646] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.886843] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.887019] ehci-pci 0000:00:1a.0: debug port 2 [ 0.891163] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.897604] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.897826] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.897974] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.898118] usb usb1: Product: EHCI Host Controller [ 0.898233] usb usb1: Manufacturer: Linux 6.1.110+ ehci_hcd [ 0.898349] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.898684] hub 1-0:1.0: USB hub found [ 0.898809] hub 1-0:1.0: 2 ports detected [ 0.899171] xen: registering gsi 18 triggering 0 polarity 1 [ 0.899180] Already setup the GSI :18 [ 0.899370] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.899592] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.899772] ehci-pci 0000:00:1d.0: debug port 2 [ 0.903845] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.910604] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.910824] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.910979] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.911123] usb usb2: Product: EHCI Host Controller [ 0.911237] usb usb2: Manufacturer: Linux 6.1.110+ ehci_hcd [ 0.911353] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.911648] hub 2-0:1.0: USB hub found [ 0.911773] hub 2-0:1.0: 2 ports detected [ 0.912199] xen: registering gsi 19 triggering 0 polarity 1 [ 0.912208] Already setup the GSI :19 [ 0.912421] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.912623] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.913841] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.914308] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.914510] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.914666] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.914872] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.915029] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.915173] usb usb3: Product: xHCI Host Controller [ 0.915287] usb usb3: Manufacturer: Linux 6.1.110+ xhci-hcd [ 0.915403] usb usb3: SerialNumber: 0000:00:14.0 [ 0.915726] hub 3-0:1.0: USB hub found [ 0.915859] hub 3-0:1.0: 8 ports detected [ 0.916974] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.917126] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.917270] usb usb4: Product: xHCI Host Controller [ 0.917405] usb usb4: Manufacturer: Linux 6.1.110+ xhci-hcd [ 0.917525] usb usb4: SerialNumber: 0000:00:14.0 [ 0.917794] hub 4-0:1.0: USB hub found [ 0.917926] hub 4-0:1.0: 6 ports detected [ 0.919000] usbcore: registered new interface driver usblp [ 0.919134] usbcore: registered new interface driver usb-storage [ 0.919639] i8042: PNP: No PS/2 controller found. [ 0.919964] rtc_cmos 00:00: RTC can wake from S4 [ 0.920645] rtc_cmos 00:00: registered as rtc0 [ 0.920807] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.921035] device-mapper: uevent: version 1.0.3 [ 0.921236] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.921260] xen: registering gsi 18 triggering 0 polarity 1 [ 0.921391] intel_pstate: CPU model not supported [ 0.921398] Already setup the GSI :18 [ 0.921518] hid: raw HID events driver (C) Jiri Kosina [ 0.921670] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.921889] usbcore: registered new interface driver usbhid [ 0.921891] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.921898] usbhid: USB HID core driver [ 0.921906] Freeing initrd memory: 20628K [ 0.922365] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.922957] Initializing XFRM netlink socket [ 0.923187] NET: Registered PF_INET6 protocol family [ 0.923687] Segment Routing with IPv6 [ 0.923808] In-situ OAM (IOAM) with IPv6 [ 0.923952] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.924196] NET: Registered PF_PACKET protocol family [ 0.924349] 9pnet: Installing 9P2000 support [ 0.924474] Key type dns_resolver registered [ 0.925234] IPI shorthand broadcast: enabled [ 0.925372] sched_clock: Marking stable (887646118, 37546432)->(1773319510, -848126960) [ 0.925962] registered taskstats version 1 [ 0.926081] Loading compiled-in X.509 certificates [ 0.928537] PM: Magic number: 8:218:814 [ 0.928733] acpi device:a3: hash matches [ 0.928916] printk: console [netcon0] enabled [ 0.929031] netconsole: network logging started [ 0.929368] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.940992] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.941329] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.941664] ALSA device list: [ 0.941792] No soundcards found. [ 0.942049] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 1.135688] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.151701] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.159687] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.196442] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.196777] ata1: SATA link down (SStatus 0 SControl 300) [ 1.196934] ata6: SATA link down (SStatus 0 SControl 300) [ 1.197076] ata2: SATA link down (SStatus 0 SControl 300) [ 1.197209] ata4: SATA link down (SStatus 0 SControl 300) [ 1.197364] ata5: SATA link down (SStatus 0 SControl 300) [ 1.197799] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.264226] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.264381] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.264907] hub 1-1:1.0: USB hub found [ 1.265097] hub 1-1:1.0: 4 ports detected [ 1.279974] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.280127] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.280517] hub 2-1:1.0: USB hub found [ 1.280725] hub 2-1:1.0: 4 ports detected [ 1.283505] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.283654] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.287038] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.287189] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.287312] usb 3-3: Product: USB2.0 Hub [ 1.288089] hub 3-3:1.0: USB hub found [ 1.288504] hub 3-3:1.0: 4 ports detected [ 1.311244] ata3.00: configured for UDMA/133 [ 1.311576] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.312488] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.312570] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.312813] sd 2:0:0:0: [sda] Write Protect is off [ 1.312935] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.313002] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.313228] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.332581] sda: sda1 sda2 < sda5 > [ 1.333066] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.334263] Freeing unused kernel image (initmem) memory: 1580K [ 1.334390] Write protecting the kernel read-only data: 22528k [ 1.352238] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.353515] Freeing unused kernel image (rodata/data gap) memory: 1560K [ 1.404592] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.530833] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.530986] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.531606] hub 3-4:1.0: USB hub found [ 1.531827] hub 3-4:1.0: 4 ports detected [ 1.594592] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.671984] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.672146] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.672294] usb 3-3.2: Product: USB2.0 Hub [ 1.672931] hub 3-3.2:1.0: USB hub found [ 1.673340] hub 3-3.2:1.0: 4 ports detected [ 1.815941] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.816067] Run /init as init process [ 1.816178] with arguments: [ 1.816179] /init [ 1.816180] placeholder [ 1.816181] with environment: [ 1.816182] HOME=/ [ 1.816183] TERM=linux [ 1.826583] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.932790] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.932977] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.938515] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 2.266383] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.266573] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.266982] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.267269] xen: registering gsi 16 triggering 0 polarity 1 [ 2.267282] Already setup the GSI :16 [ 2.270791] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.270916] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.271113] xen: registering gsi 16 triggering 0 polarity 1 [ 2.271121] Already setup the GSI :16 [ 2.296936] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 2.297370] pps pps0: new PPS source ptp0 [ 2.297616] igb 0000:07:00.0: added PHC on eth0 [ 2.297752] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.297874] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.298040] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.298155] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.298203] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 2.298401] xen: registering gsi 17 triggering 0 polarity 1 [ 2.298471] Already setup the GSI :17 [ 2.298653] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.328121] pps pps1: new PPS source ptp1 [ 2.328300] igb 0000:08:00.0: added PHC on eth1 [ 2.328434] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.328570] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.328736] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.328851] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.329078] xen: registering gsi 16 triggering 0 polarity 1 [ 2.329085] Already setup the GSI :16 [ 2.386639] igb 0000:0b:00.0: added PHC on eth2 [ 2.386777] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.386898] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.387102] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.387217] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.387442] xen: registering gsi 17 triggering 0 polarity 1 [ 2.387450] Already setup the GSI :17 [ 2.445318] igb 0000:0b:00.1: added PHC on eth3 [ 2.445455] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.445588] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.445790] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.445948] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.446174] xen: registering gsi 18 triggering 0 polarity 1 [ 2.446182] Already setup the GSI :18 [ 2.504097] igb 0000:0b:00.2: added PHC on eth4 [ 2.504256] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.504377] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.504580] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.504696] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.504936] xen: registering gsi 19 triggering 0 polarity 1 [ 2.504945] Already setup the GSI :19 [ 2.563002] igb 0000:0b:00.3: added PHC on eth5 [ 2.563141] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.563262] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.563465] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.563595] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.566857] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.585116] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.589846] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.599095] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.607927] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.616048] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 3.002152] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.130933] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.131142] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.427482] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.427977] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.428196] xen: registering gsi 17 triggering 0 polarity 1 [ 3.428205] Already setup the GSI :17 [ 4.168990] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.298928] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.299252] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.595407] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.598037] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.607042] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 5.017787] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.025778] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.741441] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.942865] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.969656] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 10.047766] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.576356] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.576524] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.576766] device enx0cc47a9f87be entered promiscuous mode [ 15.067195] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 15.173948] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 15.174239] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 15.174361] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 15.174665] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready