[ 0.000000] microcode: microcode updated early to revision 0x42e, date = 2019-03-14 [ 0.000000] Linux version 6.1.0-25-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.106-3 (2024-08-26) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 root=/dev/mapper/fiano0--vg-root ro console=ttyS0,115200n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007de2bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1800.080 MHz processor [ 0.000921] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000925] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000936] last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.001076] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001722] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved [ 0.001731] last_pfn = 0x7de2c max_arch_pfn = 0x400000000 [ 0.018538] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] [ 0.018564] Using GB pages for direct mapping [ 0.018858] RAMDISK: [mem 0x3310b000-0x3587cfff] [ 0.018867] ACPI: Early table checksum verification disabled [ 0.018871] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.018878] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.018887] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.018895] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.018901] ACPI: FACS 0x000000007E1D8080 000040 [ 0.018905] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.018911] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.018916] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.018921] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.018926] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.018931] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.018936] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.018942] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.018947] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.018952] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.018957] ACPI: DMAR 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.018962] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.018966] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.018968] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.018970] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.018971] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.018973] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.018974] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.018975] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.018977] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.018978] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.018980] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.018981] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.018982] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.018984] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.018985] ACPI: Reserving DMAR table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.018986] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.019056] No NUMA configuration found [ 0.019058] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] [ 0.019074] NODE_DATA(0) allocated [mem 0x27ffd5000-0x27fffffff] [ 0.019534] Zone ranges: [ 0.019535] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.019538] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.019541] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.019543] Device empty [ 0.019545] Movable zone start for each node [ 0.019549] Early memory node ranges [ 0.019550] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.019552] node 0: [mem 0x0000000000100000-0x000000007de2bfff] [ 0.019554] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.019557] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.019565] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.019624] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.027858] On node 0, zone Normal: 8660 pages in unavailable ranges [ 0.028152] ACPI: PM-Timer IO Port: 0x408 [ 0.028165] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.028167] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.028168] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.028170] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.028182] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.028188] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.028192] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028195] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.028202] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028204] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.028210] TSC deadline timer available [ 0.028212] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.028233] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028236] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.028238] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.028239] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.028240] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.028243] PM: hibernation: Registered nosave memory: [mem 0x7de2c000-0x7debafff] [ 0.028244] PM: hibernation: Registered nosave memory: [mem 0x7debb000-0x7dfc3fff] [ 0.028245] PM: hibernation: Registered nosave memory: [mem 0x7dfc4000-0x7e1e0fff] [ 0.028247] PM: hibernation: Registered nosave memory: [mem 0x7e1e1000-0x7f36afff] [ 0.028248] PM: hibernation: Registered nosave memory: [mem 0x7f36b000-0x7f7fffff] [ 0.028249] PM: hibernation: Registered nosave memory: [mem 0x7f800000-0x7fffffff] [ 0.028250] PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff] [ 0.028251] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.028253] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff] [ 0.028254] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff] [ 0.028255] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.028258] [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.028259] Booting paravirtualized kernel on bare hardware [ 0.028263] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.035541] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.035937] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.035946] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.035951] pcpu-alloc: [0] 0 1 2 3 [ 0.035991] Fallback order for Node 0: 0 [ 0.035996] Built 1 zonelists, mobility grouping on. Total pages: 2055603 [ 0.035998] Policy zone: Normal [ 0.036000] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 root=/dev/mapper/fiano0--vg-root ro console=ttyS0,115200n8 [ 0.036070] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64", will be passed to user space. [ 0.036084] random: crng init done [ 0.037133] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.037703] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.037791] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.037803] software IO TLB: area num 4. [ 0.079484] Memory: 2086372K/8353556K available (14342K kernel code, 2335K rwdata, 9072K rodata, 2796K init, 17396K bss, 305204K reserved, 0K cma-reserved) [ 0.079698] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.079719] Kernel/User page tables isolation: enabled [ 0.079773] ftrace: allocating 40246 entries in 158 pages [ 0.090115] ftrace: allocated 158 pages with 5 groups [ 0.091062] Dynamic Preempt: voluntary [ 0.091105] rcu: Preemptible hierarchical RCU implementation. [ 0.091107] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.091109] Trampoline variant of Tasks RCU enabled. [ 0.091110] Rude variant of Tasks RCU enabled. [ 0.091110] Tracing variant of Tasks RCU enabled. [ 0.091111] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.091113] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.098530] NR_IRQS: 524544, nr_irqs: 864, preallocated irqs: 16 [ 0.098737] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.103272] Console: colour VGA+ 80x25 [ 1.027704] printk: console [ttyS0] enabled [ 1.031902] ACPI: Core revision 20220331 [ 1.036556] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 1.045691] APIC: Switch to symmetric I/O mode setup [ 1.050671] DMAR: Host address width 46 [ 1.054522] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 1.059848] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de [ 1.067769] DMAR: RMRR base: 0x0000007de91000 end: 0x0000007de9dfff [ 1.074043] DMAR: ATSR flags: 0x0 [ 1.077355] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 1.083630] DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0 [ 1.089990] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0 [ 1.096350] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 1.101750] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 1.110877] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 1.116276] x2apic enabled [ 1.119004] Switched APIC routing to cluster x2apic. [ 1.124511] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.149686] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f275430f9, max_idle_ns: 440795270106 ns [ 1.160203] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.16 BogoMIPS (lpj=7200320) [ 1.164233] CPU0: Thermal monitoring enabled (TM1) [ 1.168286] process: using mwait in idle threads [ 1.172203] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 1.176201] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 1.180204] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.184202] Spectre V2 : Mitigation: Retpolines [ 1.188200] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.192200] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.196200] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 1.200202] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.204201] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 1.208201] MDS: Mitigation: Clear CPU buffers [ 1.212201] MMIO Stale Data: Unknown: No mitigations [ 1.216206] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.220201] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.224200] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.228201] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.232201] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.260761] Freeing SMP alternatives memory: 36K [ 1.264202] pid_max: default: 32768 minimum: 301 [ 1.268234] LSM: Security Framework initializing [ 1.272219] landlock: Up and running. [ 1.276200] Yama: disabled by default; enable with sysctl kernel.yama.* [ 1.280233] AppArmor: AppArmor initialized [ 1.284203] TOMOYO Linux initialized [ 1.288207] LSM support for eBPF active [ 1.292247] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.296216] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.304763] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2403 v2 @ 1.80GHz (family: 0x6, model: 0x3e, stepping: 0x4) [ 1.308389] cblist_init_generic: Setting adjustable number of callback queues. [ 1.312202] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.316231] cblist_init_generic: Setting adjustable number of callback queues. [ 1.320201] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.324224] cblist_init_generic: Setting adjustable number of callback queues. [ 1.328201] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.332221] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 1.336202] ... version: 3 [ 1.340201] ... bit width: 48 [ 1.344201] ... generic registers: 8 [ 1.348201] ... value mask: 0000ffffffffffff [ 1.352201] ... max period: 00007fffffffffff [ 1.356201] ... fixed-purpose events: 3 [ 1.360201] ... event mask: 00000007000000ff [ 1.364433] signal: max sigframe size: 1776 [ 1.368225] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 1.372233] rcu: Hierarchical SRCU implementation. [ 1.376201] rcu: Max phase no-delay instances is 1000. [ 1.380873] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.384294] smp: Bringing up secondary CPUs ... [ 1.388351] x86: Booting SMP configuration: [ 1.392206] .... node #0, CPUs: #1 #2 #3 [ 1.407551] smp: Brought up 1 node, 4 CPUs [ 1.412202] smpboot: Max logical packages: 1 [ 1.416201] smpboot: Total of 4 processors activated (14400.64 BogoMIPS) [ 1.441898] node 0 deferred pages initialised in 20ms [ 1.444663] devtmpfs: initialized [ 1.448282] x86/mm: Memory block size: 128MB [ 1.453237] ACPI: PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 1.456254] ACPI: PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 1.460357] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.464213] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.468263] pinctrl core: initialized pinctrl subsystem [ 1.473108] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.476480] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 1.480354] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.484353] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.488211] audit: initializing netlink subsys (disabled) [ 1.492216] audit: type=2000 audit(1726559217.404:1): state=initialized audit_enabled=0 res=1 [ 1.492351] thermal_sys: Registered thermal governor 'fair_share' [ 1.496204] thermal_sys: Registered thermal governor 'bang_bang' [ 1.500202] thermal_sys: Registered thermal governor 'step_wise' [ 1.504201] thermal_sys: Registered thermal governor 'user_space' [ 1.508201] thermal_sys: Registered thermal governor 'power_allocator' [ 1.512218] cpuidle: using governor ladder [ 1.520206] cpuidle: using governor menu [ 1.524175] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 1.524203] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.528304] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 1.532204] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 1.536210] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 1.540621] PCI: Using configuration type 1 for base access [ 1.544299] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 1.549517] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.552230] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 1.556204] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 1.564202] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 1.572201] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 1.576560] ACPI: Added _OSI(Module Device) [ 1.580206] ACPI: Added _OSI(Processor Device) [ 1.584202] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.592202] ACPI: Added _OSI(Processor Aggregator Device) [ 1.712379] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.743413] ACPI: Interpreter enabled [ 1.744223] ACPI: PM: (supports S0 S1 S4 S5) [ 1.748202] ACPI: Using IOAPIC for interrupt routing [ 1.756312] HEST: Table parsing has been initialized. [ 1.760328] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 1.764205] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.776201] PCI: Using E820 reservations for host bridge windows [ 1.780755] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.788309] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PRAD], AE_NOT_FOUND (20220331/psargs-330) [ 1.792205] ACPI Error: Aborting method \_GPE._L24 due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 1.796209] ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_L24] (20220331/evgpe-511) [ 1.800200] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.804200] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.812293] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR] [ 1.820354] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability] [ 1.828202] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.836559] PCI host bridge to bus 0000:00 [ 1.840204] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.848202] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.856201] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.860201] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.868202] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 1.876201] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.884201] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.892201] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.900202] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.904232] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.908285] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.916326] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.924301] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.928369] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.936299] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.940369] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.948239] pci 0000:00:03.0: enabling Extended Tags [ 1.952266] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.956356] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.964219] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.972346] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.976218] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.984337] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 1.992217] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 1.996336] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 2.004217] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 2.008337] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 2.016217] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 2.024335] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 2.028217] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 2.036338] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 2.040220] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 2.048336] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 2.056217] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 2.060336] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 2.068331] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 2.072325] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 2.080213] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 2.088351] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 2.092321] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 2.100344] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 2.104221] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 2.112276] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 2.116292] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 2.124221] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 2.132276] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 2.136304] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 2.144217] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 2.148292] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.156311] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 2.160300] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.168231] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 2.172203] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 2.180305] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 2.184300] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.192225] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 2.196203] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 2.204324] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 2.208218] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 2.216292] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.220304] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.228346] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 2.232416] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 2.240214] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 2.244208] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 2.252208] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 2.256208] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 2.264208] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 2.268208] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 2.272245] pci 0000:00:1f.2: PME# supported from D3hot [ 2.280292] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 2.284219] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 2.292224] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 2.296277] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 2.304222] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 2.312363] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.316253] pci 0000:00:01.1: PCI bridge to [bus 02] [ 2.320251] pci 0000:00:03.0: PCI bridge to [bus 03] [ 2.324284] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 2.332224] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 2.340215] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 2.348210] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 2.352227] pci 0000:04:00.0: enabling Extended Tags [ 2.356307] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 2.364202] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 2.376457] pci 0000:00:11.0: PCI bridge to [bus 04] [ 2.380205] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 2.384209] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 2.392299] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 2.400236] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 2.404238] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 2.412220] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 2.416390] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 2.424424] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 2.428204] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 2.436204] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 2.444302] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 2.448236] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 2.456238] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 2.460220] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 2.468387] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 2.472417] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 2.476204] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 2.484203] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 2.492224] pci_bus 0000:07: extended config space not accessible [ 2.496227] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 2.504217] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 2.508210] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 2.516210] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 2.524248] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.532312] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 2.536206] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 2.544208] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 2.552202] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 2.560201] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 2.568201] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 2.576201] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 2.588201] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 2.596201] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 2.604201] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 2.612201] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 2.624995] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 2.628206] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.640220] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 2.648202] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 2.656268] PCI host bridge to bus 0000:ff [ 2.660203] pci_bus 0000:ff: root bus resource [bus ff] [ 2.664215] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 2.672280] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 2.676270] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 2.684261] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 2.688265] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 2.696262] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 2.700267] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 2.708258] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 2.716260] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 2.720261] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 2.728262] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 2.732258] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 2.740262] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 2.744264] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 2.752277] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 2.756291] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 2.764284] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 2.768284] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 2.776283] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 2.780288] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 2.788286] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 2.792284] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 2.800292] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 2.804285] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 2.812283] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 2.816285] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 2.824284] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 2.828283] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 2.836282] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 2.840261] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 2.848266] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 2.852261] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 2.860264] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 2.864260] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 2.872259] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 2.880420] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 2.884255] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 2.892252] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 2.896252] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 2.904251] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 2.908251] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 2.916263] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 2.920252] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 2.929824] iommu: Default domain type: Translated [ 2.932202] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.940302] pps_core: LinuxPPS API ver. 1 registered [ 2.944202] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.952204] PTP clock support registered [ 2.956140] EDAC MC: Ver: 3.0.0 [ 2.960461] NetLabel: Initializing [ 2.963866] NetLabel: domain hash size = 128 [ 2.968203] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 2.976223] NetLabel: unlabeled traffic allowed by default [ 2.980202] PCI: Using ACPI for IRQ routing [ 2.991140] PCI: pci_cache_line_size set to 64 bytes [ 2.991266] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] [ 2.991269] e820: reserve RAM buffer [mem 0x7de2c000-0x7fffffff] [ 2.992241] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 2.996200] pci 0000:07:01.0: vgaarb: bridge control possible [ 2.996200] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.012209] vgaarb: loaded [ 3.016913] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 3.024202] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 3.030262] clocksource: Switched to clocksource tsc-early [ 3.033906] VFS: Disk quotas dquot_6.6.0 [ 3.037856] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.044920] AppArmor: AppArmor Filesystem Enabled [ 3.049656] pnp: PnP ACPI init [ 3.052864] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 3.059483] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 3.066097] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 3.072710] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 3.079452] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 3.086556] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 3.092481] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 3.099762] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 3.105884] pnp 00:07: [dma 0 disabled] [ 3.106124] pnp 00:08: [dma 0 disabled] [ 3.106403] system 00:09: [io 0x0400-0x0453] has been reserved [ 3.112326] system 00:09: [io 0x0458-0x047f] has been reserved [ 3.118244] system 00:09: [io 0x1180-0x119f] has been reserved [ 3.124161] system 00:09: [io 0x0500-0x057f] has been reserved [ 3.130081] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 3.136694] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 3.143655] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 3.150373] system 00:0a: [io 0x0454-0x0457] has been reserved [ 3.156576] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 3.163815] pnp: PnP ACPI: found 12 devices [ 3.174490] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.183457] NET: Registered PF_INET protocol family [ 3.188519] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 3.198853] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 3.207424] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.215255] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 3.223557] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 3.231347] TCP: Hash tables configured (established 65536 bind 65536) [ 3.237975] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 3.245528] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.252356] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.259646] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.265313] NET: Registered PF_XDP protocol family [ 3.270122] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.275095] pci 0000:00:01.1: PCI bridge to [bus 02] [ 3.280069] pci 0000:00:03.0: PCI bridge to [bus 03] [ 3.285043] pci 0000:00:11.0: PCI bridge to [bus 04] [ 3.290011] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 3.296107] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.303858] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 3.308827] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 3.314919] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 3.321708] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 3.326676] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 3.332771] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 3.339564] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 3.344532] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 3.351317] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.359057] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 3.365232] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 3.371411] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 3.377590] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 3.383769] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.390642] pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.397515] pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.404473] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.411435] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 3.417005] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.424226] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 3.429799] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 3.436062] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 3.441635] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 3.447900] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 3.454167] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.461385] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 3.467565] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 3.473744] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 3.479921] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 3.486102] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.492974] pci_bus 0000:07: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.499846] pci_bus 0000:07: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.506807] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.513858] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 3.545544] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 24040 usecs [ 3.577532] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 23994 usecs [ 3.585041] PCI: CLS 64 bytes, default 64 [ 3.589095] DMAR: No SATC found [ 3.589127] Trying to unpack rootfs image as initramfs... [ 3.592241] DMAR: dmar0: Using Queued invalidation [ 3.592319] pci 0000:00:00.0: Adding to iommu group 0 [ 3.607554] pci 0000:00:01.0: Adding to iommu group 1 [ 3.612631] pci 0000:00:01.1: Adding to iommu group 2 [ 3.617715] pci 0000:00:03.0: Adding to iommu group 3 [ 3.622799] pci 0000:00:04.0: Adding to iommu group 4 [ 3.627879] pci 0000:00:04.1: Adding to iommu group 5 [ 3.632956] pci 0000:00:04.2: Adding to iommu group 6 [ 3.638035] pci 0000:00:04.3: Adding to iommu group 7 [ 3.643112] pci 0000:00:04.4: Adding to iommu group 8 [ 3.648191] pci 0000:00:04.5: Adding to iommu group 9 [ 3.653271] pci 0000:00:04.6: Adding to iommu group 10 [ 3.658443] pci 0000:00:04.7: Adding to iommu group 11 [ 3.663608] pci 0000:00:05.0: Adding to iommu group 12 [ 3.668776] pci 0000:00:05.2: Adding to iommu group 13 [ 3.673948] pci 0000:00:05.4: Adding to iommu group 14 [ 3.679114] pci 0000:00:11.0: Adding to iommu group 15 [ 3.684299] pci 0000:00:16.0: Adding to iommu group 16 [ 3.689468] pci 0000:00:16.1: Adding to iommu group 16 [ 3.694638] pci 0000:00:1a.0: Adding to iommu group 17 [ 3.699811] pci 0000:00:1c.0: Adding to iommu group 18 [ 3.704992] pci 0000:00:1c.1: Adding to iommu group 19 [ 3.710153] pci 0000:00:1d.0: Adding to iommu group 20 [ 3.715325] pci 0000:00:1e.0: Adding to iommu group 21 [ 3.720539] pci 0000:00:1f.0: Adding to iommu group 22 [ 3.725705] pci 0000:00:1f.2: Adding to iommu group 22 [ 3.730875] pci 0000:00:1f.3: Adding to iommu group 22 [ 3.736041] pci 0000:00:1f.6: Adding to iommu group 22 [ 3.741216] pci 0000:04:00.0: Adding to iommu group 23 [ 3.746385] pci 0000:05:00.0: Adding to iommu group 24 [ 3.751559] pci 0000:06:00.0: Adding to iommu group 25 [ 3.756709] pci 0000:07:01.0: Adding to iommu group 21 [ 3.761893] pci 0000:ff:08.0: Adding to iommu group 26 [ 3.767070] pci 0000:ff:09.0: Adding to iommu group 27 [ 3.772285] pci 0000:ff:0a.0: Adding to iommu group 28 [ 3.777454] pci 0000:ff:0a.1: Adding to iommu group 28 [ 3.782626] pci 0000:ff:0a.2: Adding to iommu group 28 [ 3.787800] pci 0000:ff:0a.3: Adding to iommu group 28 [ 3.792997] pci 0000:ff:0b.0: Adding to iommu group 29 [ 3.798166] pci 0000:ff:0b.3: Adding to iommu group 29 [ 3.803358] pci 0000:ff:0c.0: Adding to iommu group 30 [ 3.808532] pci 0000:ff:0c.1: Adding to iommu group 30 [ 3.813731] pci 0000:ff:0d.0: Adding to iommu group 31 [ 3.818909] pci 0000:ff:0d.1: Adding to iommu group 31 [ 3.824097] pci 0000:ff:0e.0: Adding to iommu group 32 [ 3.829271] pci 0000:ff:0e.1: Adding to iommu group 32 [ 3.834444] pci 0000:ff:0f.0: Adding to iommu group 33 [ 3.839613] pci 0000:ff:0f.1: Adding to iommu group 34 [ 3.844776] pci 0000:ff:0f.2: Adding to iommu group 35 [ 3.849946] pci 0000:ff:0f.3: Adding to iommu group 36 [ 3.855117] pci 0000:ff:0f.4: Adding to iommu group 37 [ 3.860282] pci 0000:ff:0f.5: Adding to iommu group 38 [ 3.865456] pci 0000:ff:10.0: Adding to iommu group 39 [ 3.870625] pci 0000:ff:10.1: Adding to iommu group 40 [ 3.875794] pci 0000:ff:10.2: Adding to iommu group 41 [ 3.880959] pci 0000:ff:10.3: Adding to iommu group 42 [ 3.886127] pci 0000:ff:10.4: Adding to iommu group 43 [ 3.891292] pci 0000:ff:10.5: Adding to iommu group 44 [ 3.896457] pci 0000:ff:10.6: Adding to iommu group 45 [ 3.901620] pci 0000:ff:10.7: Adding to iommu group 46 [ 3.906845] pci 0000:ff:13.0: Adding to iommu group 47 [ 3.912027] pci 0000:ff:13.1: Adding to iommu group 47 [ 3.917203] pci 0000:ff:13.4: Adding to iommu group 47 [ 3.922376] pci 0000:ff:13.5: Adding to iommu group 47 [ 3.927577] pci 0000:ff:16.0: Adding to iommu group 48 [ 3.932750] pci 0000:ff:16.1: Adding to iommu group 48 [ 3.937924] pci 0000:ff:16.2: Adding to iommu group 48 [ 3.946952] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 3.953411] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.959849] software IO TLB: mapped [mem 0x0000000079e2c000-0x000000007de2c000] (64MB) [ 3.968333] Initialise system trusted keyrings [ 3.972798] Key type blacklist registered [ 3.976893] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 3.985171] zbud: loaded [ 3.988029] integrity: Platform Keyring initialized [ 3.992923] integrity: Machine keyring initialized [ 3.997716] Key type asymmetric registered [ 4.001819] Asymmetric key parser 'x509' registered [ 4.034923] Freeing initrd memory: 40392K [ 4.046213] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 4.052000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 4.059434] io scheduler mq-deadline registered [ 4.066412] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.073222] Monitor-Mwait will be used to enter C-1 state [ 4.073235] Monitor-Mwait will be used to enter C-2 state [ 4.073242] ACPI: \_SB_.SCK0.C000: Found 2 idle states [ 4.083339] ERST: Error Record Serialization Table (ERST) support is initialized. [ 4.090834] pstore: Registered erst as persistent store backend [ 4.096909] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.103341] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.111455] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.119680] Linux agpgart interface v0.103 [ 4.123923] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 4.133032] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 4.139913] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 4.149501] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.154471] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.159681] mousedev: PS/2 mouse device common for all mice [ 4.165298] rtc_cmos 00:02: RTC can wake from S4 [ 4.170197] rtc_cmos 00:02: registered as rtc0 [ 4.174680] rtc_cmos 00:02: setting system clock to 2024-09-17T07:47:02 UTC (1726559222) [ 4.182813] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.190636] intel_pstate: Intel P-state driver initializing [ 4.196534] ledtrig-cpu: registered to indicate activity on CPUs [ 4.221027] NET: Registered PF_INET6 protocol family [ 4.234400] Segment Routing with IPv6 [ 4.238090] In-situ OAM (IOAM) with IPv6 [ 4.242049] mip6: Mobile IPv6 [ 4.245024] NET: Registered PF_PACKET protocol family [ 4.250177] mpls_gso: MPLS GSO support [ 4.254467] microcode: sig=0x306e4, pf=0x8, revision=0x42e [ 4.260007] microcode: Microcode Update Driver: v2.2. [ 4.260016] IPI shorthand broadcast: enabled [ 4.269371] sched_clock: Marking stable (3279906723, 989430563)->(4641369262, -372031976) [ 4.277777] registered taskstats version 1 [ 4.281897] Loading compiled-in X.509 certificates [ 4.322568] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.331293] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 4.341948] zswap: loaded using pool lzo/zbud [ 4.346531] Key type .fscrypt registered [ 4.350460] Key type fscrypt-provisioning registered [ 4.355740] pstore: Using crash dump compression: deflate [ 4.367715] Key type encrypted registered [ 4.371744] AppArmor: AppArmor sha1 policy hashing enabled [ 4.377239] ima: No TPM chip found, activating TPM-bypass! [ 4.382723] ima: Allocated hash algorithm: sha256 [ 4.387440] ima: No architecture policies found [ 4.391982] evm: Initialising EVM extended attributes: [ 4.397116] evm: security.selinux [ 4.400433] evm: security.SMACK64 (disabled) [ 4.404708] evm: security.SMACK64EXEC (disabled) [ 4.409325] evm: security.SMACK64TRANSMUTE (disabled) [ 4.414379] evm: security.SMACK64MMAP (disabled) [ 4.418999] evm: security.apparmor [ 4.422403] evm: security.ima [ 4.425375] evm: security.capability [ 4.428956] evm: HMAC attrs: 0x1 [ 4.609206] clk: Disabling unused clocks [ 4.614918] Freeing unused decrypted memory: 2036K [ 4.620358] Freeing unused kernel image (initmem) memory: 2796K [ 4.626357] Write protecting the kernel read-only data: 26624k [ 4.632890] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 4.639826] Freeing unused kernel image (rodata/data gap) memory: 1168K [ 4.729343] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.735781] x86/mm: Checking user space page tables [ 4.816044] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.822490] Run /init as init process [ 4.826152] with arguments: [ 4.826154] /init [ 4.826155] with environment: [ 4.826156] HOME=/ [ 4.826158] TERM=linux [ 4.826159] BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 [ 4.993446] tsc: Refined TSC clocksource calibration: 1799.999 MHz [ 4.999642] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 5.009871] clocksource: Switched to clocksource tsc [ 5.046001] SCSI subsystem initialized [ 5.069429] ACPI: bus type USB registered [ 5.073513] usbcore: registered new interface driver usbfs [ 5.079062] e1000e: Intel(R) PRO/1000 Network Driver [ 5.084056] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 5.084448] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 5.087939] usbcore: registered new interface driver hub [ 5.087957] usbcore: registered new device driver usb [ 5.090250] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.095890] i2c i2c-0: 1/6 memory slots populated (from DMI) [ 5.121165] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 5.140988] libata version 3.00 loaded. [ 5.145762] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.151026] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.151309] ahci 0000:00:1f.2: version 3.0 [ 5.158434] ehci-pci 0000:00:1a.0: debug port 2 [ 5.161566] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 5.166991] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 5.173573] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 5.184381] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 5.192740] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.198673] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.206945] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.214168] usb usb1: Product: EHCI Host Controller [ 5.219051] usb usb1: Manufacturer: Linux 6.1.0-25-amd64 ehci_hcd [ 5.221921] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:13:33:8c [ 5.225144] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.233064] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 5.237864] hub 1-0:1.0: USB hub found [ 5.244634] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.248319] hub 1-0:1.0: 2 ports detected [ 5.255323] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.259357] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.268447] scsi host0: ahci [ 5.273709] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.276646] scsi host1: ahci [ 5.283881] ehci-pci 0000:00:1d.0: debug port 2 [ 5.286877] scsi host2: ahci [ 5.294307] scsi host3: ahci [ 5.294648] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 5.295204] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 5.297365] scsi host4: ahci [ 5.303660] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 5.309471] scsi host5: ahci [ 5.313508] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.318645] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 32 [ 5.321713] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.327881] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 32 [ 5.330815] isci 0000:04:00.0: OEM parameter table found in OROM [ 5.330819] isci 0000:04:00.0: OEM SAS parameters (version: 1.0) loaded (platform) [ 5.331186] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 5.331244] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 5.334018] scsi host6: isci [ 5.335324] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.343583] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 32 [ 5.350975] usb usb2: Product: EHCI Host Controller [ 5.350978] usb usb2: Manufacturer: Linux 6.1.0-25-amd64 ehci_hcd [ 5.350979] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.356980] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 32 [ 5.364737] hub 2-0:1.0: USB hub found [ 5.372104] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 32 [ 5.372106] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 32 [ 5.386933] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:13:33:8d [ 5.393470] hub 2-0:1.0: 2 ports detected [ 5.398127] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 5.458523] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.533506] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.657488] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.684314] ata3: SATA link down (SStatus 0 SControl 300) [ 5.689759] ata6: SATA link down (SStatus 0 SControl 300) [ 5.695193] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.701409] ata2: SATA link down (SStatus 0 SControl 300) [ 5.701750] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.706888] ata5: SATA link down (SStatus 0 SControl 300) [ 5.714988] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.715329] hub 1-1:1.0: USB hub found [ 5.720412] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 5.727751] hub 1-1:1.0: 6 ports detected [ 5.731326] ata4: SATA link down (SStatus 0 SControl 300) [ 5.747825] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.756654] ata1.00: configured for UDMA/133 [ 5.761253] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 5.771642] e1000e 0000:05:00.0 enx0cc47a13338c: renamed from eth0 [ 5.793890] e1000e 0000:06:00.0 enx0cc47a13338d: renamed from eth1 [ 5.800804] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.808487] sd 0:0:0:0: [sda] Write Protect is off [ 5.813281] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.813301] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.822375] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 5.828871] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.837059] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.844576] hub 2-1:1.0: USB hub found [ 5.848374] hub 2-1:1.0: 8 ports detected [ 5.862130] sda: sda1 sda2 < sda5 > [ 5.866008] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.029483] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 6.143313] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 6.151684] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.159004] usb 1-1.1: Product: Hermon USB hidmouse Device [ 6.164495] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 6.183122] hid: raw HID events driver (C) Jiri Kosina [ 6.195587] usbcore: registered new interface driver usbhid [ 6.201208] usbhid: USB HID core driver [ 6.208188] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input3 [ 6.223083] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 6.237998] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input4 [ 6.278875] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.291171] device-mapper: uevent: version 1.0.3 [ 6.295917] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 6.425587] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 6.916516] PM: Image not found (code -22) [ 7.344316] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 7.355603] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 7.527359] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 9.170653] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 9.193842] ACPI: button: Power Button [PWRB] [ 9.198354] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 9.206160] ACPI: button: Power Button [PWRF] [ 9.251500] dca service started, version 1.12.1 [ 9.347481] IPMI message handler: version 39.2 [ 9.353656] ipmi device interface [ 9.407211] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.454759] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 9.503860] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 9.537625] ipmi_si: IPMI System Interface driver [ 9.537636] ACPI: bus type drm_connector registered [ 9.545478] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 9.553643] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 9.561196] ipmi_si: Adding SMBIOS-specified kcs state machine [ 9.568309] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 9.574348] iTCO_vendor_support: vendor-support=0 [ 9.577590] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 9.601394] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 9.615915] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 9.623856] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 9.629600] RAPL PMU: hw unit of domain package 2^-16 Joules [ 9.635258] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 9.647174] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 9.655879] ipmi_si: Adding ACPI-specified kcs state machine [ 9.661632] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 9.671736] cryptd: max_cpu_qlen set to 1000 [ 9.709101] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 9.738809] mgag200 0000:07:01.0: vgaarb: deactivate vga console [ 9.749804] Console: switching to colour dummy device 80x25 [ 9.757743] AVX version of gcm_enc/dec engaged. [ 9.762336] AES CTR mode by8 optimization enabled [ 9.762643] [drm] Initialized mgag200 1.0.0 20110418 for 0000:07:01.0 on minor 0 [ 9.776251] fbcon: mgag200drmfb (fb0) is primary device [ 9.797621] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 9.849008] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x0703, dev_id: 0x20) [ 9.888432] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 9.956365] ipmi_ssif: IPMI SSIF Interface driver [ 10.139404] Console: switching to colour frame buffer device 128x48 [ 10.279489] mgag200 0000:07:01.0: [drm] fb0: mgag200drmfb frame buffer device [ 10.629327] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.629353] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.629361] EDAC sbridge: Seeking for: PCI ID 8086:0e60 [ 10.629368] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.629376] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.629380] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.629387] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.629391] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.629398] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.629401] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.629409] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.629412] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.629420] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.629423] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.629446] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.629450] EDAC sbridge: Seeking for: PCI ID 8086:0e68 [ 10.629457] EDAC sbridge: Seeking for: PCI ID 8086:0e79 [ 10.629464] EDAC sbridge: Seeking for: PCI ID 8086:0e6a [ 10.629471] EDAC sbridge: Seeking for: PCI ID 8086:0e6b [ 10.629478] EDAC sbridge: Seeking for: PCI ID 8086:0e6c [ 10.629485] EDAC sbridge: Seeking for: PCI ID 8086:0e6d [ 10.629492] EDAC sbridge: Seeking for: PCI ID 8086:0eb8 [ 10.629499] EDAC sbridge: Seeking for: PCI ID 8086:0ebc [ 10.629506] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.629515] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.629517] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.629526] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.629528] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.629537] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.629671] EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT) [ 10.640737] EDAC sbridge: Ver: 1.1.2 [ 10.710113] intel_rapl_common: Found RAPL domain package [ 10.715445] intel_rapl_common: Found RAPL domain core [ 10.720539] intel_rapl_common: Found RAPL domain dram [ 11.967070] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 13.166373] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 13.191897] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 13.239757] Adding 1949692k swap on /dev/mapper/fiano0--vg-swap_1. Priority:-2 extents:1 across:1949692k FS [ 13.862613] audit: type=1400 audit(1726559232.096:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1065 comm="apparmor_parser" [ 13.877788] audit: type=1400 audit(1726559232.096:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1066 comm="apparmor_parser" [ 13.893169] audit: type=1400 audit(1726559232.096:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1066 comm="apparmor_parser" [ 13.921236] audit: type=1400 audit(1726559232.152:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1068 comm="apparmor_parser" [ 13.936385] audit: type=1400 audit(1726559232.152:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1068 comm="apparmor_parser" [ 13.951326] audit: type=1400 audit(1726559232.152:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1068 comm="apparmor_parser" [ 14.087075] audit: type=1400 audit(1726559232.320:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=1076 comm="apparmor_parser" [ 14.122757] audit: type=1400 audit(1726559232.356:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1067 comm="apparmor_parser" [ 14.140741] audit: type=1400 audit(1726559232.356:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1067 comm="apparmor_parser" [ 14.158200] audit: type=1400 audit(1726559232.356:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1067 comm="apparmor_parser" [ 17.390537] e1000e 0000:05:00.0 enx0cc47a13338c: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 17.400266] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a13338c: link becomes ready