[ 0.000000] Linux version 6.11.0+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Tue Sep 17 06:56:35 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/pinot0--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000f6000000-0x00000000f6003fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SML/H8SML, BIOS 3.5 11/25/2013 [ 0.000000] DMI: Memory slots populated: 2/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000012] Xen PV: Detected 4 vCPUS [ 0.039303] tsc: Fast TSC calibration using PIT [ 0.039304] tsc: Detected 2800.090 MHz processor [ 0.039306] tsc: Detected 2799.998 MHz TSC [ 0.039526] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.039530] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.039537] last_pfn = 0xdfeb2 max_arch_pfn = 0x400000000 [ 0.039541] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.039543] MTRRs set to read-only [ 0.039546] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.065882] RAMDISK: [mem 0x04000000-0x05472fff] [ 0.065903] ACPI: Early table checksum verification disabled [ 0.067029] ACPI: RSDP 0x00000000000FA1C0 000024 (v02 ACPIAM) [ 0.067040] ACPI: XSDT 0x00000000DFEA0100 00007C (v01 SMCI 20131125 MSFT 00000097) [ 0.067076] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.067126] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20240827/tbfadt-560) [ 0.067138] ACPI: DSDT 0x00000000DFEA0600 00562B (v01 1CF11 1CF11000 00000000 INTL 20051117) [ 0.067149] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.067159] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.067169] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.067180] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.067190] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.067200] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.067210] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.067220] ACPI: SSDT 0x00000000DFEAA6F0 000B9C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.067231] ACPI: EINJ 0x00000000DFEAB290 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.067241] ACPI: BERT 0x00000000DFEAB420 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.067252] ACPI: ERST 0x00000000DFEAB450 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.067263] ACPI: HEST 0x00000000DFEAB660 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.067269] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.067271] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c2a] [ 0.067272] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.067273] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.067275] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.067276] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.067277] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.067278] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.067280] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.067281] ACPI: Reserving SSDT table memory at [mem 0xdfeaa6f0-0xdfeab28b] [ 0.067282] ACPI: Reserving EINJ table memory at [mem 0xdfeab290-0xdfeab3bf] [ 0.067284] ACPI: Reserving BERT table memory at [mem 0xdfeab420-0xdfeab44f] [ 0.067285] ACPI: Reserving ERST table memory at [mem 0xdfeab450-0xdfeab65f] [ 0.067286] ACPI: Reserving HEST table memory at [mem 0xdfeab660-0xdfeab707] [ 0.067402] APIC: Switched APIC routing to: Xen PV [ 0.069751] Zone ranges: [ 0.069752] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.069755] DMA32 [mem 0x0000000001000000-0x00000000dfeb1fff] [ 0.069757] Normal empty [ 0.069759] Movable zone start for each node [ 0.069760] Early memory node ranges [ 0.069761] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.069763] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.069765] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.069777] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.069869] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.074012] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.074026] p2m virtual area at (____ptrval____), size is 40000000 [ 0.337635] Remapped 102 page(s) [ 0.338162] ACPI: PM-Timer IO Port: 0x808 [ 0.338195] CPU topo: CPU limit of 4 reached. Ignoring further CPUs [ 0.338226] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.338230] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.338252] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.338260] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.338272] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.338277] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.338299] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.338304] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.338317] CPU topo: Max. logical packages: 1 [ 0.338319] CPU topo: Max. logical dies: 1 [ 0.338319] CPU topo: Max. dies per package: 1 [ 0.338326] CPU topo: Max. threads per core: 1 [ 0.338328] CPU topo: Num. cores per package: 4 [ 0.338328] CPU topo: Num. threads per package: 4 [ 0.338329] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.338330] CPU topo: Rejected CPUs 4 [ 0.338348] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.338351] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.338353] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.338354] PM: hibernation: Registered nosave memory: [mem 0x20066000-0xdfe9dfff] [ 0.338356] PM: hibernation: Registered nosave memory: [mem 0xdfe9e000-0xdfe9ffff] [ 0.338357] PM: hibernation: Registered nosave memory: [mem 0xdfea0000-0xdfeb1fff] [ 0.338359] [mem 0x20066000-0xdfe9dfff] available for PCI devices [ 0.338364] Booting kernel on Xen [ 0.338365] Xen version: 4.20-unstable (preserve-AD) [ 0.338369] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.344846] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.345769] percpu: Embedded 57 pages/cpu s193816 r8192 d31464 u524288 [ 0.345779] pcpu-alloc: s193816 r8192 d31464 u524288 alloc=1*2097152 [ 0.345785] pcpu-alloc: [0] 0 1 2 3 [ 0.345870] xen: PV spinlocks enabled [ 0.345874] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.345878] Kernel command line: placeholder root=/dev/mapper/pinot0--vg-root ro console=hvc0 [ 0.345959] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.346162] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.346260] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.346471] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.346474] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.346478] software IO TLB: area num 4. [ 0.451599] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.454419] Dynamic Preempt: voluntary [ 0.454531] rcu: Preemptible hierarchical RCU implementation. [ 0.454533] rcu: RCU event tracing is enabled. [ 0.454534] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.454536] Trampoline variant of Tasks RCU enabled. [ 0.454537] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.454539] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.454557] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.461565] NR_IRQS: 4352, nr_irqs: 1000, preallocated irqs: 16 [ 0.461721] xen:events: Using FIFO-based ABI [ 0.461750] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.461763] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.461768] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.461774] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.461779] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.461785] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.461790] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.461795] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.461801] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.461806] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.461811] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.461817] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.461822] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.461827] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.461833] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.461845] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.467997] Console: colour VGA+ 80x25 [ 0.468003] printk: legacy console [tty0] enabled [ 0.482133] printk: legacy console [hvc0] enabled [ 0.482814] ACPI: Core revision 20240827 [ 0.486757] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.486914] Xen: using vcpuop timer interface [ 0.486920] installing Xen timer for CPU 0 [ 0.487168] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c3ee517e, max_idle_ns: 440795257231 ns [ 0.487328] Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.99 BogoMIPS (lpj=2799998) [ 0.487520] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.487724] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.487839] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.487968] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.488337] Spectre V2 : Mitigation: Retpolines [ 0.488441] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.488584] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.488694] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.488805] RETBleed: Mitigation: untrained return thunk [ 0.488912] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.489056] Speculative Store Bypass: Vulnerable [ 0.489180] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.489329] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.489454] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.489565] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.489675] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.515153] Freeing SMP alternatives memory: 40K [ 0.515292] pid_max: default: 32768 minimum: 301 [ 0.515368] LSM: initializing lsm=capability,selinux [ 0.515503] SELinux: Initializing. [ 0.515843] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.516004] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.517457] cpu 0 spinlock event irq 57 [ 0.518348] VPMU disabled by hypervisor. [ 0.518938] Performance Events: PMU not available due to virtualization, using software events only. [ 0.519120] signal: max sigframe size: 1776 [ 0.519280] rcu: Hierarchical SRCU implementation. [ 0.519330] rcu: Max phase no-delay instances is 400. [ 0.519546] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.529346] smp: Bringing up secondary CPUs ... [ 0.529675] installing Xen timer for CPU 1 [ 0.530108] installing Xen timer for CPU 2 [ 0.530487] installing Xen timer for CPU 3 [ 0.026475] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0011 [ 0.530718] cpu 1 spinlock event irq 77 [ 0.026475] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0012 [ 0.531560] cpu 2 spinlock event irq 78 [ 0.026475] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0013 [ 0.532386] cpu 3 spinlock event irq 79 [ 0.533507] smp: Brought up 1 node, 4 CPUs [ 0.533684] Memory: 381940K/524284K available (16384K kernel code, 2774K rwdata, 6276K rodata, 2688K init, 1780K bss, 138296K reserved, 0K cma-reserved) [ 0.534330] devtmpfs: initialized [ 0.534490] x86/mm: Memory block size: 128MB [ 0.535388] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.535610] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.535772] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.535993] PM: RTC time: 08:10:03, date: 2024-09-17 [ 0.536325] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.536480] xen:grant_table: Grant tables using version 1 layout [ 0.536607] Grant table initialized [ 0.537029] audit: initializing netlink subsys (disabled) [ 0.537353] audit: type=2000 audit(1726560603.672:1): state=initialized audit_enabled=0 res=1 [ 0.538479] thermal_sys: Registered thermal governor 'step_wise' [ 0.538491] thermal_sys: Registered thermal governor 'user_space' [ 0.540323] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.541046] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.732461] PCI: Using configuration type 1 for base access [ 0.732741] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.733447] ACPI: Added _OSI(Module Device) [ 0.733528] ACPI: Added _OSI(Processor Device) [ 0.733638] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.734335] ACPI: Added _OSI(Processor Aggregator Device) [ 0.740587] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.741194] xen: registering gsi 9 triggering 0 polarity 1 [ 0.742375] ACPI: Interpreter enabled [ 0.742510] ACPI: PM: (supports S0 S1 S4 S5) [ 0.742621] ACPI: Using IOAPIC for interrupt routing [ 0.742804] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.742960] PCI: Using E820 reservations for host bridge windows [ 0.743267] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.755154] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.755281] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.755335] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.755455] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.755605] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.756075] PCI host bridge to bus 0000:00 [ 0.756187] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.756306] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.756329] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.756480] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.756630] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.756782] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.756953] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.757637] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.758242] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.758453] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.758580] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.758703] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.758882] pci 0000:00:09.0: enabling Extended Tags [ 0.759137] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.759463] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.759697] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.759828] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.759950] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.760127] pci 0000:00:0a.0: enabling Extended Tags [ 0.760377] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.760747] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f conventional PCI endpoint [ 0.760952] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.761091] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.761240] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.761356] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.761494] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.761632] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.761838] pci 0000:00:11.0: set SATA to AHCI mode [ 0.762196] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.762378] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.762813] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.763040] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.763487] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.763691] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.764070] pci 0000:00:12.2: supports D1 D2 [ 0.764202] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.764493] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.764697] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.765121] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.765329] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.765807] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.766009] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.766382] pci 0000:00:13.2: supports D1 D2 [ 0.766491] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.766834] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.767408] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.767610] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.767749] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.767914] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.768089] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.768226] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.768392] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.768509] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.768624] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.768744] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.769072] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.769659] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.769912] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.770049] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.770178] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.770486] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.770693] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.771152] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.771550] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.771900] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.772259] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.772572] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.772921] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.773457] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.773664] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.773863] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.774006] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.774408] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.774860] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.775206] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.775386] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.775563] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.775705] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.776115] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.778378] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.778579] pci_bus 0000:03: extended config space not accessible [ 0.778765] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.779037] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.779177] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.779357] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.779634] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.780111] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.780277] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.780329] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.780510] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.780678] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.780826] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.781047] pci_bus 0000:00: on NUMA node 0 [ 0.781654] xen: registering gsi 13 triggering 1 polarity 0 [ 0.782200] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.782393] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.782618] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.782846] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.783055] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.783278] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.783404] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.783627] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.783890] xen:balloon: Initialising balloon driver [ 0.784811] iommu: Default domain type: Translated [ 0.785116] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.785743] SCSI subsystem initialized [ 0.786351] libata version 3.00 loaded. [ 0.786538] ACPI: bus type USB registered [ 0.786947] usbcore: registered new interface driver usbfs [ 0.787163] usbcore: registered new interface driver hub [ 0.787399] usbcore: registered new device driver usb [ 0.787816] pps_core: LinuxPPS API ver. 1 registered [ 0.788029] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.788358] PTP clock support registered [ 0.789367] Advanced Linux Sound Architecture Driver Initialized. [ 0.791137] NetLabel: Initializing [ 0.791346] NetLabel: domain hash size = 128 [ 0.791629] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.791997] NetLabel: unlabeled traffic allowed by default [ 0.792498] PCI: Using ACPI for IRQ routing [ 0.827637] PCI: pci_cache_line_size set to 64 bytes [ 0.827827] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.827833] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.827891] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.827891] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.827891] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.828329] vgaarb: loaded [ 0.831232] clocksource: Switched to clocksource tsc-early [ 0.831232] VFS: Disk quotas dquot_6.6.0 [ 0.831232] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.831232] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.831381] pnp: PnP ACPI init [ 0.831689] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.831689] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.832598] xen: registering gsi 8 triggering 1 polarity 0 [ 0.832853] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.833225] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.833369] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.833868] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.833985] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.834101] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.834217] system 00:05: [io 0x040b] has been reserved [ 0.834341] system 00:05: [io 0x04d6] has been reserved [ 0.834484] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.834642] system 00:05: [io 0x0c14] has been reserved [ 0.834755] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.834870] system 00:05: [io 0x0c52] has been reserved [ 0.834983] system 00:05: [io 0x0c6c] has been reserved [ 0.835095] system 00:05: [io 0x0c6f] has been reserved [ 0.835208] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.835324] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.835448] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.835565] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.835706] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.835822] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.835979] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.836095] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.836210] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.836333] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.836450] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.836566] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.836684] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.836803] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.837231] xen: registering gsi 4 triggering 1 polarity 0 [ 0.837236] Already setup the GSI :4 [ 0.837389] pnp 00:06: [dma 0 disabled] [ 0.837728] xen: registering gsi 3 triggering 1 polarity 0 [ 0.837740] pnp 00:07: [dma 0 disabled] [ 0.837916] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.838324] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.838533] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.838665] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.838808] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.838927] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.839223] pnp: PnP ACPI: found 10 devices [ 0.863222] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.863417] NET: Registered PF_INET protocol family [ 0.863613] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.864142] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.864299] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.864485] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.864676] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.864872] TCP: Hash tables configured (established 4096 bind 4096) [ 0.865022] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.865172] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.865353] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.865684] RPC: Registered named UNIX socket transport module. [ 0.865801] RPC: Registered udp transport module. [ 0.865912] RPC: Registered tcp transport module. [ 0.866022] RPC: Registered tcp-with-tls transport module. [ 0.866134] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.866889] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.867012] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.867142] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.867281] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.867404] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.867554] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.867695] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.867858] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.867984] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.868152] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.868269] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.868392] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.868512] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.868631] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.868775] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.868888] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.869005] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.869119] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.869274] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.869397] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.869515] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.869631] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.869747] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.869866] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.870011] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.870344] xen: registering gsi 16 triggering 0 polarity 1 [ 0.870381] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.532526] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 646775 usecs [ 1.532786] xen: registering gsi 16 triggering 0 polarity 1 [ 1.532819] Already setup the GSI :16 [ 1.555523] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 22265 usecs [ 1.555789] xen: registering gsi 17 triggering 0 polarity 1 [ 1.555855] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.556060] xen: registering gsi 18 triggering 0 polarity 1 [ 1.556085] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.579521] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 22968 usecs [ 1.579841] xen: registering gsi 18 triggering 0 polarity 1 [ 1.579852] Already setup the GSI :18 [ 1.603542] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 23210 usecs [ 1.603808] xen: registering gsi 19 triggering 0 polarity 1 [ 1.603867] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.604123] xen: registering gsi 18 triggering 0 polarity 1 [ 1.604127] Already setup the GSI :18 [ 1.627519] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 22906 usecs [ 1.627763] PCI: CLS 64 bytes, default 64 [ 1.627923] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.628038] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 1.628107] Unpacking initramfs... [ 1.628248] kvm_intel: VMX not supported by CPU 0 [ 1.628435] kvm_amd: SVM not supported by CPU 0 [ 1.628572] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c3ee517e, max_idle_ns: 440795257231 ns [ 1.629900] clocksource: Switched to clocksource tsc [ 1.694737] Initialise system trusted keyrings [ 1.695162] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.695625] NFS: Registering the id_resolver key type [ 1.695813] Key type id_resolver registered [ 1.695922] Key type id_legacy registered [ 1.696178] 9p: Installing v9fs 9p2000 file system support [ 1.716825] Key type asymmetric registered [ 1.716977] Asymmetric key parser 'x509' registered [ 1.717158] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.717328] io scheduler mq-deadline registered [ 1.717439] io scheduler kyber registered [ 1.718068] xen: registering gsi 53 triggering 0 polarity 1 [ 1.718124] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.718519] xen: registering gsi 54 triggering 0 polarity 1 [ 1.718541] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.718998] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.719213] ACPI: button: Power Button [PWRB] [ 1.719394] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.720099] ACPI: button: Power Button [PWRF] [ 1.724219] xen:xen_evtchn: Event-channel device installed [ 1.724634] xen_pciback: backend is vpci [ 1.727932] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.728424] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.729303] hpet_acpi_add: no address or irqs in _CRS [ 1.729513] Non-volatile memory driver v1.3 [ 1.742768] loop: module loaded [ 1.763835] ahci 0000:00:11.0: version 3.0 [ 1.763978] xen: registering gsi 22 triggering 0 polarity 1 [ 1.764016] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.764203] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.764358] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.764470] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.766313] scsi host0: ahci [ 1.767283] scsi host1: ahci [ 1.768146] scsi host2: ahci [ 1.769014] scsi host3: ahci [ 1.769180] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 4 [ 1.769328] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 4 [ 1.769473] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 4 [ 1.769866] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 4 [ 1.770846] tun: Universal TUN/TAP device driver, 1.6 [ 1.771124] e100: Intel(R) PRO/100 Network Driver [ 1.771228] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.771348] sky2: driver version 1.30 [ 1.771689] xen_netfront: Initialising Xen virtual ethernet driver [ 1.772673] xen: registering gsi 16 triggering 0 polarity 1 [ 1.772685] Already setup the GSI :16 [ 1.772860] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.772961] xen: registering gsi 19 triggering 0 polarity 1 [ 1.773044] xen: registering gsi 17 triggering 0 polarity 1 [ 1.773045] Already setup the GSI :19 [ 1.773159] Already setup the GSI :17 [ 1.773196] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.773674] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.828719] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.828908] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.829051] usb usb1: Product: OHCI PCI host controller [ 1.829157] usb usb1: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.829263] usb usb1: SerialNumber: 0000:00:12.0 [ 1.829641] hub 1-0:1.0: USB hub found [ 1.829760] hub 1-0:1.0: 3 ports detected [ 1.830093] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.830294] xen: registering gsi 16 triggering 0 polarity 1 [ 1.830303] Already setup the GSI :16 [ 1.830504] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.830929] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.831509] ehci-pci 0000:00:13.2: debug port 1 [ 1.832494] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 1.835270] Freeing initrd memory: 20940K [ 1.839515] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.839906] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 1.840284] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.840766] usb usb2: Product: EHCI Host Controller [ 1.841086] usb usb2: Manufacturer: Linux 6.11.0+ ehci_hcd [ 1.841372] usb usb2: SerialNumber: 0000:00:13.2 [ 1.842599] hub 2-0:1.0: USB hub found [ 1.842957] hub 2-0:1.0: 6 ports detected [ 1.893832] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.894221] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3 [ 1.894369] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.894604] ehci-pci 0000:00:12.2: debug port 1 [ 1.894856] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.900513] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.900741] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 1.900914] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.901056] usb usb3: Product: EHCI Host Controller [ 1.901161] usb usb3: Manufacturer: Linux 6.11.0+ ehci_hcd [ 1.901267] usb usb3: SerialNumber: 0000:00:12.2 [ 1.901803] hub 3-0:1.0: USB hub found [ 1.901916] hub 3-0:1.0: 6 ports detected [ 1.950663] hub 1-0:1.0: USB hub found [ 1.950810] hub 1-0:1.0: 3 ports detected [ 1.951190] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.952021] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.952605] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 2.007760] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 2.007923] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.008064] usb usb4: Product: OHCI PCI host controller [ 2.008173] usb usb4: Manufacturer: Linux 6.11.0+ ohci_hcd [ 2.008312] usb usb4: SerialNumber: 0000:00:12.1 [ 2.008694] hub 4-0:1.0: USB hub found [ 2.008807] hub 4-0:1.0: 3 ports detected [ 2.009185] xen: registering gsi 18 triggering 0 polarity 1 [ 2.009192] Already setup the GSI :18 [ 2.009338] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.009618] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 2.009830] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 2.064634] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 2.064787] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.064928] usb usb5: Product: OHCI PCI host controller [ 2.065071] usb usb5: Manufacturer: Linux 6.11.0+ ohci_hcd [ 2.065176] usb usb5: SerialNumber: 0000:00:13.0 [ 2.065495] hub 5-0:1.0: USB hub found [ 2.065609] hub 5-0:1.0: 3 ports detected [ 2.065940] xen: registering gsi 18 triggering 0 polarity 1 [ 2.065945] Already setup the GSI :18 [ 2.066080] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 2.066256] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 2.066433] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 2.077697] ata4: SATA link down (SStatus 0 SControl 300) [ 2.077886] ata3: SATA link down (SStatus 0 SControl 300) [ 2.121624] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 2.121777] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.121957] usb usb6: Product: OHCI PCI host controller [ 2.122086] usb usb6: Manufacturer: Linux 6.11.0+ ohci_hcd [ 2.122191] usb usb6: SerialNumber: 0000:00:13.1 [ 2.122514] hub 6-0:1.0: USB hub found [ 2.122630] hub 6-0:1.0: 3 ports detected [ 2.122985] xen: registering gsi 18 triggering 0 polarity 1 [ 2.122991] Already setup the GSI :18 [ 2.123126] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.123353] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.123539] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 2.178633] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 2.178827] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.178967] usb usb7: Product: OHCI PCI host controller [ 2.179072] usb usb7: Manufacturer: Linux 6.11.0+ ohci_hcd [ 2.179177] usb usb7: SerialNumber: 0000:00:14.5 [ 2.179534] hub 7-0:1.0: USB hub found [ 2.179654] hub 7-0:1.0: 2 ports detected [ 2.179958] usbcore: registered new interface driver usblp [ 2.180089] usbcore: registered new interface driver usb-storage [ 2.180339] i8042: PNP: No PS/2 controller found. [ 2.180442] i8042: Probing ports directly. [ 2.183665] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.183779] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.184155] rtc_cmos 00:02: RTC can wake from S4 [ 2.184795] rtc_cmos 00:02: registered as rtc0 [ 2.184942] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 2.185098] device-mapper: uevent: version 1.0.3 [ 2.185287] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 2.185439] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 2.185630] hid: raw HID events driver (C) Jiri Kosina [ 2.185984] usbcore: registered new interface driver usbhid [ 2.186090] usbhid: USB HID core driver [ 2.186768] Initializing XFRM netlink socket [ 2.186888] NET: Registered PF_INET6 protocol family [ 2.187649] Segment Routing with IPv6 [ 2.187764] In-situ OAM (IOAM) with IPv6 [ 2.187902] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.188186] NET: Registered PF_PACKET protocol family [ 2.188320] 9pnet: Installing 9P2000 support [ 2.188502] Key type dns_resolver registered [ 2.188621] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 2.189146] IPI shorthand broadcast: enabled [ 2.193851] sched_clock: Marking stable (2168003891, 25475084)->(2207347448, -13868473) [ 2.194315] registered taskstats version 1 [ 2.194418] Loading compiled-in X.509 certificates [ 2.196624] PM: Magic number: 8:758:169 [ 2.196823] printk: legacy console [netcon0] enabled [ 2.196929] netconsole: network logging started [ 2.197171] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.207915] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.208305] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 2.208466] ALSA device list: [ 2.210828] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 2.210994] No soundcards found. [ 2.231538] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.231679] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.232262] ata2.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133 [ 2.232868] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.233345] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 2.233757] ata2.00: configured for UDMA/133 [ 2.233908] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.235749] ata1.00: configured for UDMA/133 [ 2.246067] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.246626] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.246627] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.246923] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5 [ 2.246942] sd 0:0:0:0: [sda] Write Protect is off [ 2.247202] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.247226] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.247411] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.247524] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.247697] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.247889] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 2.248027] sd 1:0:0:0: [sdb] Write Protect is off [ 2.248165] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.248194] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.248409] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 2.287866] sda: sda1 sda2 < sda5 > [ 2.288224] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.288650] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.290245] Freeing unused kernel image (initmem) memory: 2688K [ 2.290381] Write protecting the kernel read-only data: 24576k [ 2.302549] Freeing unused kernel image (rodata/data gap) memory: 1916K [ 2.364517] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.416791] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.416910] Run /init as init process [ 2.417010] with arguments: [ 2.417011] /init [ 2.417012] placeholder [ 2.417014] with environment: [ 2.417015] HOME=/ [ 2.417016] TERM=linux [ 2.524593] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.524755] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.524869] usb 6-2: Product: Hermon USB hidmouse Device [ 2.524975] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.532020] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.539814] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.543089] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.688376] e1000e: Intel(R) PRO/1000 Network Driver [ 2.688528] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.689308] xen: registering gsi 48 triggering 0 polarity 1 [ 2.689344] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.689580] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.717622] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.731378] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.774345] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e8:ac [ 2.774511] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.774703] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.774908] xen: registering gsi 47 triggering 0 polarity 1 [ 2.774935] xen: --> pirq=47 -> irq=47 (gsi=47) [ 2.775169] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.820565] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.864439] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e8:ad [ 2.864611] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.864828] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.866667] e1000e 0000:01:00.0 enx002590aee8ac: renamed from eth0 [ 2.867499] random: crng init done [ 2.867502] e1000e 0000:02:00.0 enx002590aee8ad: renamed from eth1 [ 3.501048] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.506676] EXT4-fs (dm-0): mounted filesystem dd7e71a8-0d5e-40a5-a9fe-b4342ea04f00 ro with ordered data mode. Quota mode: none. [ 8.062313] EXT4-fs (dm-0): re-mounted dd7e71a8-0d5e-40a5-a9fe-b4342ea04f00 r/w. Quota mode: none. [ 9.620396] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.645003] EXT4-fs (sda1): mounted filesystem 3af66f09-16e5-4f67-8e21-5fc1bb061097 r/w with ordered data mode. Quota mode: none. [ 9.716912] Adding 1949692k swap on /dev/mapper/pinot0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.281665] xenbr0: port 1(enx002590aee8ac) entered blocking state [ 11.281845] xenbr0: port 1(enx002590aee8ac) entered disabled state [ 11.281962] e1000e 0000:01:00.0 enx002590aee8ac: entered allmulticast mode [ 11.282120] e1000e 0000:01:00.0 enx002590aee8ac: entered promiscuous mode [ 14.461547] e1000e 0000:01:00.0 enx002590aee8ac: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 14.461935] xenbr0: port 1(enx002590aee8ac) entered blocking state [ 14.462063] xenbr0: port 1(enx002590aee8ac) entered forwarding state