[ 0.000000] Linux version 6.11.0+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Tue Sep 17 18:10:33 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/pinot0--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000f6000000-0x00000000f6003fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SML/H8SML, BIOS 3.5 11/25/2013 [ 0.000000] DMI: Memory slots populated: 2/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000011] Xen PV: Detected 4 vCPUS [ 0.038870] tsc: Fast TSC calibration using PIT [ 0.038871] tsc: Detected 2799.884 MHz processor [ 0.038873] tsc: Detected 2799.986 MHz TSC [ 0.039093] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.039096] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.039103] last_pfn = 0xdfeb2 max_arch_pfn = 0x400000000 [ 0.039106] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.039108] MTRRs set to read-only [ 0.039111] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.065434] RAMDISK: [mem 0x04000000-0x05472fff] [ 0.065453] ACPI: Early table checksum verification disabled [ 0.066574] ACPI: RSDP 0x00000000000FA1C0 000024 (v02 ACPIAM) [ 0.066585] ACPI: XSDT 0x00000000DFEA0100 00007C (v01 SMCI 20131125 MSFT 00000097) [ 0.066619] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.066668] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20240827/tbfadt-560) [ 0.066680] ACPI: DSDT 0x00000000DFEA0600 00562B (v01 1CF11 1CF11000 00000000 INTL 20051117) [ 0.066690] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.066699] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.066709] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.066718] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.066728] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.066738] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.066747] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.066757] ACPI: SSDT 0x00000000DFEAA6F0 000B9C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.066767] ACPI: EINJ 0x00000000DFEAB290 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.066778] ACPI: BERT 0x00000000DFEAB420 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.066788] ACPI: ERST 0x00000000DFEAB450 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.066798] ACPI: HEST 0x00000000DFEAB660 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.066803] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.066805] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c2a] [ 0.066806] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.066808] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.066809] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.066810] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.066811] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.066812] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.066813] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.066814] ACPI: Reserving SSDT table memory at [mem 0xdfeaa6f0-0xdfeab28b] [ 0.066815] ACPI: Reserving EINJ table memory at [mem 0xdfeab290-0xdfeab3bf] [ 0.066817] ACPI: Reserving BERT table memory at [mem 0xdfeab420-0xdfeab44f] [ 0.066818] ACPI: Reserving ERST table memory at [mem 0xdfeab450-0xdfeab65f] [ 0.066819] ACPI: Reserving HEST table memory at [mem 0xdfeab660-0xdfeab707] [ 0.066935] APIC: Switched APIC routing to: Xen PV [ 0.069252] Zone ranges: [ 0.069253] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.069256] DMA32 [mem 0x0000000001000000-0x00000000dfeb1fff] [ 0.069258] Normal empty [ 0.069259] Movable zone start for each node [ 0.069260] Early memory node ranges [ 0.069261] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.069263] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.069265] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.069276] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.069371] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.073551] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.073564] p2m virtual area at (____ptrval____), size is 40000000 [ 0.337172] Remapped 102 page(s) [ 0.337701] ACPI: PM-Timer IO Port: 0x808 [ 0.337732] CPU topo: CPU limit of 4 reached. Ignoring further CPUs [ 0.337762] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.337766] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.337789] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.337797] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.337809] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.337814] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.337836] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.337840] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.337852] CPU topo: Max. logical packages: 1 [ 0.337854] CPU topo: Max. logical dies: 1 [ 0.337854] CPU topo: Max. dies per package: 1 [ 0.337861] CPU topo: Max. threads per core: 1 [ 0.337862] CPU topo: Num. cores per package: 4 [ 0.337863] CPU topo: Num. threads per package: 4 [ 0.337864] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.337865] CPU topo: Rejected CPUs 4 [ 0.337883] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.337886] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.337887] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.337889] PM: hibernation: Registered nosave memory: [mem 0x20066000-0xdfe9dfff] [ 0.337890] PM: hibernation: Registered nosave memory: [mem 0xdfe9e000-0xdfe9ffff] [ 0.337891] PM: hibernation: Registered nosave memory: [mem 0xdfea0000-0xdfeb1fff] [ 0.337893] [mem 0x20066000-0xdfe9dfff] available for PCI devices [ 0.337898] Booting kernel on Xen [ 0.337899] Xen version: 4.20-unstable (preserve-AD) [ 0.337903] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.344369] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.345299] percpu: Embedded 57 pages/cpu s193816 r8192 d31464 u524288 [ 0.345309] pcpu-alloc: s193816 r8192 d31464 u524288 alloc=1*2097152 [ 0.345314] pcpu-alloc: [0] 0 1 2 3 [ 0.345398] xen: PV spinlocks enabled [ 0.345402] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.345405] Kernel command line: placeholder root=/dev/mapper/pinot0--vg-root ro console=hvc0 [ 0.345492] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.345700] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.345800] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.346010] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.346013] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.346017] software IO TLB: area num 4. [ 0.452398] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.455228] Dynamic Preempt: voluntary [ 0.455339] rcu: Preemptible hierarchical RCU implementation. [ 0.455340] rcu: RCU event tracing is enabled. [ 0.455342] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.455344] Trampoline variant of Tasks RCU enabled. [ 0.455345] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.455347] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.455366] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.462387] NR_IRQS: 4352, nr_irqs: 1000, preallocated irqs: 16 [ 0.462543] xen:events: Using FIFO-based ABI [ 0.462571] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.462583] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.462589] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.462594] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.462599] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.462605] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.462610] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.462615] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.462620] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.462625] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.462631] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.462636] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.462641] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.462647] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.462652] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.462663] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.468796] Console: colour VGA+ 80x25 [ 0.468802] printk: legacy console [tty0] enabled [ 0.482870] printk: legacy console [hvc0] enabled [ 0.483553] ACPI: Core revision 20240827 [ 0.487543] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.487701] Xen: using vcpuop timer interface [ 0.487707] installing Xen timer for CPU 0 [ 0.487953] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c335c9f5, max_idle_ns: 440795236380 ns [ 0.488112] Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.97 BogoMIPS (lpj=2799986) [ 0.488327] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.488550] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.488661] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.488776] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.489122] Spectre V2 : Mitigation: Retpolines [ 0.489225] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.489369] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.489479] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.489590] RETBleed: Mitigation: untrained return thunk [ 0.489712] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.489857] Speculative Store Bypass: Vulnerable [ 0.489983] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.490114] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.490225] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.490335] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.490445] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.516045] Freeing SMP alternatives memory: 40K [ 0.516119] pid_max: default: 32768 minimum: 301 [ 0.516263] LSM: initializing lsm=capability,selinux [ 0.516428] SELinux: Initializing. [ 0.516748] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.516894] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.518243] cpu 0 spinlock event irq 57 [ 0.519134] VPMU disabled by hypervisor. [ 0.519749] Performance Events: PMU not available due to virtualization, using software events only. [ 0.519917] signal: max sigframe size: 1776 [ 0.520077] rcu: Hierarchical SRCU implementation. [ 0.520114] rcu: Max phase no-delay instances is 400. [ 0.520329] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.530192] smp: Bringing up secondary CPUs ... [ 0.530519] installing Xen timer for CPU 1 [ 0.530931] installing Xen timer for CPU 2 [ 0.531296] installing Xen timer for CPU 3 [ 0.026441] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0011 [ 0.531528] cpu 1 spinlock event irq 77 [ 0.026441] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0012 [ 0.532342] cpu 2 spinlock event irq 78 [ 0.026441] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0013 [ 0.533283] cpu 3 spinlock event irq 79 [ 0.534297] smp: Brought up 1 node, 4 CPUs [ 0.535498] Memory: 381940K/524284K available (16384K kernel code, 2776K rwdata, 6280K rodata, 2692K init, 1772K bss, 138296K reserved, 0K cma-reserved) [ 0.536572] devtmpfs: initialized [ 0.537346] x86/mm: Memory block size: 128MB [ 0.538172] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.538388] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.538547] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.538798] PM: RTC time: 19:55:17, date: 2024-09-17 [ 0.539291] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.539439] xen:grant_table: Grant tables using version 1 layout [ 0.539569] Grant table initialized [ 0.539930] audit: initializing netlink subsys (disabled) [ 0.540199] audit: type=2000 audit(1726602917.756:1): state=initialized audit_enabled=0 res=1 [ 0.541542] thermal_sys: Registered thermal governor 'step_wise' [ 0.541557] thermal_sys: Registered thermal governor 'user_space' [ 0.543911] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.544119] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.625563] PCI: Using configuration type 1 for base access [ 0.625786] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.628210] ACPI: Added _OSI(Module Device) [ 0.628546] ACPI: Added _OSI(Processor Device) [ 0.628769] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.629002] ACPI: Added _OSI(Processor Aggregator Device) [ 0.648118] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.651580] xen: registering gsi 9 triggering 0 polarity 1 [ 0.661985] ACPI: Interpreter enabled [ 0.662214] ACPI: PM: (supports S0 S1 S4 S5) [ 0.662507] ACPI: Using IOAPIC for interrupt routing [ 0.662967] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.663140] PCI: Using E820 reservations for host bridge windows [ 0.664367] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.699335] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.699470] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.699626] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.699740] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.699884] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.700403] PCI host bridge to bus 0000:00 [ 0.700509] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.700648] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.700761] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.700903] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.701051] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.701114] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.701273] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.701902] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.702429] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.702645] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.702804] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.702945] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.703116] pci 0000:00:09.0: enabling Extended Tags [ 0.703345] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.703640] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.703856] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.703975] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.704095] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.704165] pci 0000:00:0a.0: enabling Extended Tags [ 0.704390] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.704703] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f conventional PCI endpoint [ 0.704897] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.705031] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.705163] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.705293] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.705426] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.705555] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.705720] pci 0000:00:11.0: set SATA to AHCI mode [ 0.706056] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.706158] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.706574] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.706770] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.707188] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.707379] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.707741] pci 0000:00:12.2: supports D1 D2 [ 0.707845] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.708162] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.708351] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.708747] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.708942] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.709393] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.709583] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.709955] pci 0000:00:13.2: supports D1 D2 [ 0.710059] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.710294] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.710856] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.711052] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.711137] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.711266] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.711395] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.711524] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.711686] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.711799] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.711913] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.712064] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.712336] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.712847] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.713080] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.713131] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.713318] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.713606] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.713801] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.714209] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.714570] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.714935] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.715272] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.715626] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.715970] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.716446] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.716641] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.716814] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.716975] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.717350] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.717798] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.718088] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.718166] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.718331] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.718465] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.718881] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.721164] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.721374] pci_bus 0000:03: extended config space not accessible [ 0.721639] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.721837] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.721975] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.722142] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.722389] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.722862] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.723025] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.723114] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.723292] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.723442] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.723619] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.723876] pci_bus 0000:00: on NUMA node 0 [ 0.724416] xen: registering gsi 13 triggering 1 polarity 0 [ 0.724898] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.725126] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.725355] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.725544] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.725728] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.725910] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.726164] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.726388] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.726636] xen:balloon: Initialising balloon driver [ 0.727151] iommu: Default domain type: Translated [ 0.727275] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.727824] SCSI subsystem initialized [ 0.728202] libata version 3.00 loaded. [ 0.728391] ACPI: bus type USB registered [ 0.728788] usbcore: registered new interface driver usbfs [ 0.729137] usbcore: registered new interface driver hub [ 0.729525] usbcore: registered new device driver usb [ 0.729942] pps_core: LinuxPPS API ver. 1 registered [ 0.730114] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.730427] PTP clock support registered [ 0.731391] Advanced Linux Sound Architecture Driver Initialized. [ 0.733595] NetLabel: Initializing [ 0.733896] NetLabel: domain hash size = 128 [ 0.734094] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.734253] NetLabel: unlabeled traffic allowed by default [ 0.734717] PCI: Using ACPI for IRQ routing [ 0.767951] PCI: pci_cache_line_size set to 64 bytes [ 0.768140] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.768146] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.768213] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.768280] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.768390] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.768536] vgaarb: loaded [ 0.771666] clocksource: Switched to clocksource tsc-early [ 0.772021] VFS: Disk quotas dquot_6.6.0 [ 0.772021] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.772489] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.772721] pnp: PnP ACPI init [ 0.774422] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.775381] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.777178] xen: registering gsi 8 triggering 1 polarity 0 [ 0.778239] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.779321] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.779644] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.781229] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.781546] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.781923] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.782169] system 00:05: [io 0x040b] has been reserved [ 0.782460] system 00:05: [io 0x04d6] has been reserved [ 0.782744] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.783126] system 00:05: [io 0x0c14] has been reserved [ 0.783324] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.783624] system 00:05: [io 0x0c52] has been reserved [ 0.783914] system 00:05: [io 0x0c6c] has been reserved [ 0.784167] system 00:05: [io 0x0c6f] has been reserved [ 0.784512] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.784801] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.785106] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.785398] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.785692] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.786004] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.786257] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.786569] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.786858] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.787139] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.787380] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.787677] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.787988] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.788247] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.789656] xen: registering gsi 4 triggering 1 polarity 0 [ 0.789678] Already setup the GSI :4 [ 0.789975] pnp 00:06: [dma 0 disabled] [ 0.791298] xen: registering gsi 3 triggering 1 polarity 0 [ 0.791348] pnp 00:07: [dma 0 disabled] [ 0.792208] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.793609] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.794205] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.794509] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.794801] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.795132] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.796078] pnp: PnP ACPI: found 10 devices [ 0.887952] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.888188] NET: Registered PF_INET protocol family [ 0.888817] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.889496] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.889651] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.889796] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.889981] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.890223] TCP: Hash tables configured (established 4096 bind 4096) [ 0.890428] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.890546] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.890711] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.891433] RPC: Registered named UNIX socket transport module. [ 0.891563] RPC: Registered udp transport module. [ 0.891694] RPC: Registered tcp transport module. [ 0.891798] RPC: Registered tcp-with-tls transport module. [ 0.891904] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.893617] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.893741] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.893862] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.893996] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.894172] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.894296] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.894427] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.894543] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.894662] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.894820] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.894931] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.895042] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.895168] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.895307] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.895424] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.895533] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.895644] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.895752] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.895863] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.895973] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.896085] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.896236] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.896350] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.896463] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.896600] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.896907] xen: registering gsi 16 triggering 0 polarity 1 [ 0.896950] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.559812] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 647468 usecs [ 1.560273] xen: registering gsi 16 triggering 0 polarity 1 [ 1.560283] Already setup the GSI :16 [ 1.583342] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 22589 usecs [ 1.583586] xen: registering gsi 17 triggering 0 polarity 1 [ 1.583654] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.583842] xen: registering gsi 18 triggering 0 polarity 1 [ 1.583860] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.606364] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 22046 usecs [ 1.606600] xen: registering gsi 18 triggering 0 polarity 1 [ 1.606612] Already setup the GSI :18 [ 1.629383] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 22303 usecs [ 1.629648] xen: registering gsi 19 triggering 0 polarity 1 [ 1.629698] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.629904] xen: registering gsi 18 triggering 0 polarity 1 [ 1.629908] Already setup the GSI :18 [ 1.653365] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 22963 usecs [ 1.653633] PCI: CLS 64 bytes, default 64 [ 1.653782] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.653909] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 1.654124] kvm_intel: VMX not supported by CPU 1 [ 1.654139] Unpacking initramfs... [ 1.654356] kvm_amd: SVM not supported by CPU 1 [ 1.655048] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c335c9f5, max_idle_ns: 440795236380 ns [ 1.655589] clocksource: Switched to clocksource tsc [ 1.662197] Initialise system trusted keyrings [ 1.662513] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.662867] NFS: Registering the id_resolver key type [ 1.663004] Key type id_resolver registered [ 1.663116] Key type id_legacy registered [ 1.663348] 9p: Installing v9fs 9p2000 file system support [ 1.684031] Key type asymmetric registered [ 1.684180] Asymmetric key parser 'x509' registered [ 1.684357] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.684564] io scheduler mq-deadline registered [ 1.684675] io scheduler kyber registered [ 1.686092] xen: registering gsi 53 triggering 0 polarity 1 [ 1.686139] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.686469] xen: registering gsi 54 triggering 0 polarity 1 [ 1.686589] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.689000] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.689679] ACPI: button: Power Button [PWRB] [ 1.690273] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.691221] ACPI: button: Power Button [PWRF] [ 1.697124] xen:xen_evtchn: Event-channel device installed [ 1.697605] xen_pciback: backend is vpci [ 1.701542] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.702001] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.704323] hpet_acpi_add: no address or irqs in _CRS [ 1.704688] Non-volatile memory driver v1.3 [ 1.708493] loop: module loaded [ 1.723622] ahci 0000:00:11.0: version 3.0 [ 1.723789] xen: registering gsi 22 triggering 0 polarity 1 [ 1.723834] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.724062] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.724231] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.724360] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.726235] scsi host0: ahci [ 1.726649] scsi host1: ahci [ 1.727211] scsi host2: ahci [ 1.727671] scsi host3: ahci [ 1.727851] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 4 [ 1.728008] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 4 [ 1.728175] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 4 [ 1.728359] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 4 [ 1.729069] tun: Universal TUN/TAP device driver, 1.6 [ 1.729292] e100: Intel(R) PRO/100 Network Driver [ 1.729410] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.729560] sky2: driver version 1.30 [ 1.729790] xen_netfront: Initialising Xen virtual ethernet driver [ 1.730280] xen: registering gsi 16 triggering 0 polarity 1 [ 1.730296] Already setup the GSI :16 [ 1.730494] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.730689] xen: registering gsi 17 triggering 0 polarity 1 [ 1.730705] Already setup the GSI :17 [ 1.730720] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.731332] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.731899] xen: registering gsi 19 triggering 0 polarity 1 [ 1.731924] Already setup the GSI :19 [ 1.786688] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.786864] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.787006] usb usb1: Product: OHCI PCI host controller [ 1.787130] usb usb1: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.787237] usb usb1: SerialNumber: 0000:00:12.0 [ 1.787761] hub 1-0:1.0: USB hub found [ 1.787913] hub 1-0:1.0: 3 ports detected [ 1.788475] xen: registering gsi 16 triggering 0 polarity 1 [ 1.788485] Already setup the GSI :16 [ 1.789191] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.789658] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2 [ 1.789808] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.789976] ehci-pci 0000:00:12.2: debug port 1 [ 1.790212] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.795545] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.795789] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 1.795935] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.796077] usb usb2: Product: EHCI Host Controller [ 1.796222] usb usb2: Manufacturer: Linux 6.11.0+ ehci_hcd [ 1.796328] usb usb2: SerialNumber: 0000:00:12.2 [ 1.797234] hub 2-0:1.0: USB hub found [ 1.797544] hub 2-0:1.0: 6 ports detected [ 1.846711] hub 1-0:1.0: USB hub found [ 1.846856] hub 1-0:1.0: 3 ports detected [ 1.847243] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.847576] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 1.847734] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.847928] ehci-pci 0000:00:13.2: debug port 1 [ 1.848195] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 1.853472] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.853747] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 1.853895] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.854038] usb usb3: Product: EHCI Host Controller [ 1.854143] usb usb3: Manufacturer: Linux 6.11.0+ ehci_hcd [ 1.854263] usb usb3: SerialNumber: 0000:00:13.2 [ 1.854806] hub 3-0:1.0: USB hub found [ 1.855187] hub 3-0:1.0: 6 ports detected [ 1.855813] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.856210] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.856439] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 1.911767] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.911940] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.912082] usb usb4: Product: OHCI PCI host controller [ 1.912188] usb usb4: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.912295] usb usb4: SerialNumber: 0000:00:12.1 [ 1.913074] hub 4-0:1.0: USB hub found [ 1.913469] hub 4-0:1.0: 3 ports detected [ 1.913962] xen: registering gsi 18 triggering 0 polarity 1 [ 1.913974] Already setup the GSI :18 [ 1.914193] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.914416] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.914667] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 1.934136] Freeing initrd memory: 20940K [ 1.969721] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 1.969901] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.970044] usb usb5: Product: OHCI PCI host controller [ 1.970149] usb usb5: Manufacturer: Linux 6.11.0+ ohci_hcd [ 1.970282] usb usb5: SerialNumber: 0000:00:13.0 [ 1.970962] hub 5-0:1.0: USB hub found [ 1.971305] hub 5-0:1.0: 3 ports detected [ 1.972875] xen: registering gsi 18 triggering 0 polarity 1 [ 1.972885] Already setup the GSI :18 [ 1.973051] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.973491] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.973684] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 2.028602] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 2.028780] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.028947] usb usb6: Product: OHCI PCI host controller [ 2.029054] usb usb6: Manufacturer: Linux 6.11.0+ ohci_hcd [ 2.029282] usb usb6: SerialNumber: 0000:00:13.1 [ 2.029838] hub 6-0:1.0: USB hub found [ 2.029954] hub 6-0:1.0: 3 ports detected [ 2.031390] xen: registering gsi 18 triggering 0 polarity 1 [ 2.031418] Already setup the GSI :18 [ 2.031972] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.032676] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.033214] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 2.039489] ata4: SATA link down (SStatus 0 SControl 300) [ 2.039702] ata3: SATA link down (SStatus 0 SControl 300) [ 2.088726] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11 [ 2.088932] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.089073] usb usb7: Product: OHCI PCI host controller [ 2.089178] usb usb7: Manufacturer: Linux 6.11.0+ ohci_hcd [ 2.089285] usb usb7: SerialNumber: 0000:00:14.5 [ 2.089603] hub 7-0:1.0: USB hub found [ 2.089717] hub 7-0:1.0: 2 ports detected [ 2.090079] usbcore: registered new interface driver usblp [ 2.090248] usbcore: registered new interface driver usb-storage [ 2.090494] i8042: PNP: No PS/2 controller found. [ 2.090597] i8042: Probing ports directly. [ 2.093597] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.093737] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.094056] rtc_cmos 00:02: RTC can wake from S4 [ 2.094667] rtc_cmos 00:02: registered as rtc0 [ 2.094818] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 2.095001] device-mapper: uevent: version 1.0.3 [ 2.095243] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 2.095396] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 2.095573] hid: raw HID events driver (C) Jiri Kosina [ 2.095924] usbcore: registered new interface driver usbhid [ 2.096031] usbhid: USB HID core driver [ 2.096702] Initializing XFRM netlink socket [ 2.096822] NET: Registered PF_INET6 protocol family [ 2.097397] Segment Routing with IPv6 [ 2.097537] In-situ OAM (IOAM) with IPv6 [ 2.097682] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.097952] NET: Registered PF_PACKET protocol family [ 2.098089] 9pnet: Installing 9P2000 support [ 2.098209] Key type dns_resolver registered [ 2.098324] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 2.098872] IPI shorthand broadcast: enabled [ 2.103616] sched_clock: Marking stable (2078004266, 25441598)->(2114229291, -10783427) [ 2.104124] registered taskstats version 1 [ 2.104227] Loading compiled-in X.509 certificates [ 2.106353] PM: Magic number: 8:204:951 [ 2.106500] tty tty8: hash matches [ 2.106618] memory memory4: hash matches [ 2.106724] printk: legacy console [netcon0] enabled [ 2.106870] netconsole: network logging started [ 2.107156] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.117558] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.117948] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 2.119656] ALSA device list: [ 2.119756] No soundcards found. [ 2.120592] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 2.192512] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.192671] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.193222] ata2.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133 [ 2.193848] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.194745] ata2.00: configured for UDMA/133 [ 2.195013] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 2.195474] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.197295] ata1.00: configured for UDMA/133 [ 2.207691] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.208218] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.208293] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.208546] sd 0:0:0:0: [sda] Write Protect is off [ 2.208693] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.208722] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.208745] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5 [ 2.208910] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.209499] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.209500] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.209794] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 2.209913] sd 1:0:0:0: [sdb] Write Protect is off [ 2.210019] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.210041] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.210225] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 2.252963] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.265647] sda: sda1 sda2 < sda5 > [ 2.266004] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.267559] Freeing unused kernel image (initmem) memory: 2692K [ 2.267733] Write protecting the kernel read-only data: 24576k [ 2.280007] Freeing unused kernel image (rodata/data gap) memory: 1912K [ 2.395325] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.395506] Run /init as init process [ 2.395617] with arguments: [ 2.395618] /init [ 2.395620] placeholder [ 2.395621] with environment: [ 2.395623] HOME=/ [ 2.395624] TERM=linux [ 2.446604] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.607615] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.607777] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.607891] usb 6-2: Product: Hermon USB hidmouse Device [ 2.608023] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.614052] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.614453] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.618056] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.660508] e1000e: Intel(R) PRO/1000 Network Driver [ 2.660632] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.660862] xen: registering gsi 48 triggering 0 polarity 1 [ 2.660899] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.661126] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.704357] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.723599] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.747321] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e8:ac [ 2.747529] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.747721] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.747927] xen: registering gsi 47 triggering 0 polarity 1 [ 2.747952] xen: --> pirq=47 -> irq=47 (gsi=47) [ 2.748147] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.794526] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.840421] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e8:ad [ 2.840584] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.840775] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.842344] random: crng init done [ 2.842704] e1000e 0000:01:00.0 enx002590aee8ac: renamed from eth0 [ 2.844099] e1000e 0000:02:00.0 enx002590aee8ad: renamed from eth1 [ 3.528165] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.534893] EXT4-fs (dm-0): mounted filesystem 6c84bd4f-35d0-4e84-8590-05d51d8b52c7 ro with ordered data mode. Quota mode: none. [ 7.865091] EXT4-fs (dm-0): re-mounted 6c84bd4f-35d0-4e84-8590-05d51d8b52c7 r/w. Quota mode: none. [ 9.668409] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.698043] EXT4-fs (sda1): mounted filesystem aea95a62-654a-4d05-9b82-889998ab5574 r/w with ordered data mode. Quota mode: none. [ 9.769886] Adding 1949692k swap on /dev/mapper/pinot0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.369339] xenbr0: port 1(enx002590aee8ac) entered blocking state [ 11.369506] xenbr0: port 1(enx002590aee8ac) entered disabled state [ 11.369624] e1000e 0000:01:00.0 enx002590aee8ac: entered allmulticast mode [ 11.369782] e1000e 0000:01:00.0 enx002590aee8ac: entered promiscuous mode [ 14.474519] e1000e 0000:01:00.0 enx002590aee8ac: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 14.474911] xenbr0: port 1(enx002590aee8ac) entered blocking state [ 14.475037] xenbr0: port 1(enx002590aee8ac) entered forwarding state