[ 0.000000] Linux version 6.1.110+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Wed Sep 18 17:21:48 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000459] tsc: Detected 2199.998 MHz processor [ 0.000894] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000898] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000905] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000906] Disabled [ 0.000907] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000911] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000950] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027840] RAMDISK: [mem 0x04000000-0x05424fff] [ 0.027848] ACPI: Early table checksum verification disabled [ 0.028446] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028458] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028495] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028543] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028560] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028576] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028592] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028608] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028623] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028639] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028656] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028672] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028688] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028704] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028720] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028736] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028752] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028768] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028784] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028800] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028821] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028837] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028845] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028847] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028848] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028849] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028850] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028851] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028852] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028853] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028854] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028855] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028856] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028857] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028858] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028859] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028860] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028861] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028862] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028863] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028864] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028865] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028911] Setting APIC routing to Xen PV. [ 0.032843] Zone ranges: [ 0.032844] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032846] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032848] Normal empty [ 0.032849] Movable zone start for each node [ 0.032850] Early memory node ranges [ 0.032850] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032852] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032854] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032859] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032895] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034449] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034454] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221937] Remapped 102 page(s) [ 0.223309] ACPI: PM-Timer IO Port: 0x408 [ 0.223362] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223365] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223366] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223368] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223369] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223371] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223372] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223374] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223402] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223415] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223418] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223444] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223449] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223518] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223533] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223535] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223536] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223538] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223543] Booting kernel on Xen [ 0.223544] Xen version: 4.20-unstable (preserve-AD) [ 0.223547] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229802] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.230086] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.230092] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.230095] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230173] xen: PV spinlocks enabled [ 0.230176] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230181] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230183] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230220] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230229] random: crng init done [ 0.230278] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230303] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231618] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231621] software IO TLB: area num 8. [ 0.291009] Memory: 389288K/524284K available (14349K kernel code, 2686K rwdata, 4584K rodata, 1580K init, 1288K bss, 134744K reserved, 0K cma-reserved) [ 0.291177] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.293657] Dynamic Preempt: voluntary [ 0.293757] rcu: Preemptible hierarchical RCU implementation. [ 0.293757] rcu: RCU event tracing is enabled. [ 0.293758] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.293760] Trampoline variant of Tasks RCU enabled. [ 0.293761] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.293762] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.304253] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.304378] xen:events: Using FIFO-based ABI [ 0.304402] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.304410] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.304418] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.304425] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.304433] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.304440] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.304448] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.304455] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.304462] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.304469] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.304477] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.304485] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.304492] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.304501] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.304508] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.304519] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.309874] Console: colour VGA+ 80x25 [ 0.324647] printk: console [tty0] enabled [ 0.325972] printk: console [hvc0] enabled [ 0.326112] ACPI: Core revision 20220331 [ 0.341599] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.341765] Xen: using vcpuop timer interface [ 0.341773] installing Xen timer for CPU 0 [ 0.341922] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.342081] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199998) [ 0.342409] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.342526] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.342654] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.342803] Spectre V2 : Mitigation: Retpolines [ 0.343089] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.343255] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.343375] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.343496] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.343644] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.343762] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.343914] MDS: Mitigation: Clear CPU buffers [ 0.344027] TAA: Mitigation: Clear CPU buffers [ 0.344086] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.344251] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.344396] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.344547] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.344666] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.344786] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.362446] Freeing SMP alternatives memory: 40K [ 0.362573] pid_max: default: 32768 minimum: 301 [ 0.363103] LSM: Security Framework initializing [ 0.363226] SELinux: Initializing. [ 0.363365] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363519] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364173] cpu 0 spinlock event irq 25 [ 0.364293] VPMU disabled by hypervisor. [ 0.364728] cblist_init_generic: Setting adjustable number of callback queues. [ 0.364875] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.365033] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.365086] signal: max sigframe size: 1776 [ 0.365249] rcu: Hierarchical SRCU implementation. [ 0.365373] rcu: Max phase no-delay instances is 400. [ 0.365856] smp: Bringing up secondary CPUs ... [ 0.366193] installing Xen timer for CPU 1 [ 0.366661] cpu 1 spinlock event irq 35 [ 0.367222] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.367390] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.367579] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.368304] installing Xen timer for CPU 2 [ 0.368774] cpu 2 spinlock event irq 41 [ 0.369199] installing Xen timer for CPU 3 [ 0.369647] cpu 3 spinlock event irq 47 [ 0.369647] installing Xen timer for CPU 4 [ 0.370419] cpu 4 spinlock event irq 53 [ 0.370419] installing Xen timer for CPU 5 [ 0.371248] cpu 5 spinlock event irq 59 [ 0.371287] installing Xen timer for CPU 6 [ 0.372125] cpu 6 spinlock event irq 65 [ 0.372342] installing Xen timer for CPU 7 [ 0.372772] cpu 7 spinlock event irq 71 [ 0.373335] smp: Brought up 1 node, 8 CPUs [ 0.373453] smpboot: Max logical packages: 1 [ 0.373671] devtmpfs: initialized [ 0.373671] x86/mm: Memory block size: 128MB [ 0.374313] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.374347] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.374522] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.375085] PM: RTC time: 18:29:21, date: 2024-09-18 [ 0.375339] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.375481] xen:grant_table: Grant tables using version 1 layout [ 0.375617] Grant table initialized [ 0.375922] audit: initializing netlink subsys (disabled) [ 0.376106] audit: type=2000 audit(1726684162.193:1): state=initialized audit_enabled=0 res=1 [ 0.376153] thermal_sys: Registered thermal governor 'step_wise' [ 0.376153] thermal_sys: Registered thermal governor 'user_space' [ 0.376312] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.376746] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.377090] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.506051] PCI: Using configuration type 1 for base access [ 0.508611] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.509147] ACPI: Added _OSI(Module Device) [ 0.509271] ACPI: Added _OSI(Processor Device) [ 0.509271] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.509271] ACPI: Added _OSI(Processor Aggregator Device) [ 0.539203] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.541202] xen: registering gsi 9 triggering 0 polarity 0 [ 0.543782] ACPI: Dynamic OEM Table Load: [ 0.552227] ACPI: Interpreter enabled [ 0.552365] ACPI: PM: (supports S0 S4 S5) [ 0.552477] ACPI: Using IOAPIC for interrupt routing [ 0.552624] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.552774] PCI: Using E820 reservations for host bridge windows [ 0.553369] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.578464] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.578593] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.578830] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.579097] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.579218] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.579394] PCI host bridge to bus 0000:ff [ 0.579506] pci_bus 0000:ff: root bus resource [bus ff] [ 0.579700] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.580151] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.580594] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.581016] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.581405] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.581836] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.582260] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.582681] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.583130] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.583566] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.583987] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.584391] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.584817] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.585240] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.585675] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.586098] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.586521] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.586953] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.587221] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.587679] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.588151] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.588619] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.589085] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.589552] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.590019] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.590424] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.590848] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.591280] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.591746] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.592217] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.592683] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.593142] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.593566] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.593989] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.594389] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.594821] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.595288] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.595755] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.596222] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.596741] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.597165] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.597588] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.598016] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.598215] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.598651] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.599078] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.599505] pci_bus 0000:ff: on NUMA node 0 [ 0.603759] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.603886] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.604168] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.604511] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.604631] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.605114] PCI host bridge to bus 0000:00 [ 0.605228] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.605349] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.605469] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.605614] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.605759] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.605937] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.606578] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.607099] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.607466] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.607994] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.608352] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.608868] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.609226] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.609741] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.609741] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.609741] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.610008] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.610080] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.610080] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.611478] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.612103] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.612769] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.612986] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.613429] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.613771] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.613988] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.614427] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.614733] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.614950] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.615417] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.615775] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.615972] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.616499] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.616815] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.617363] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.617591] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.617714] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.625253] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.625814] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.626009] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.626093] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.626382] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.626938] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.627133] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.627255] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.627539] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.628096] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.628311] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.628432] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.628755] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.628952] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.629490] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.629809] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.630560] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.630755] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.630921] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.631079] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.631234] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.631391] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.631549] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.631860] pci 0000:00:1f.2: PME# supported from D3hot [ 0.632145] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.632370] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.632614] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.632990] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.633183] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.633899] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.634187] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.634519] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.634735] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.635484] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.635697] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.636401] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.636614] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.637321] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.637534] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.638229] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.638363] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.638702] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.638914] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.639203] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.639387] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.639737] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.639958] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.640080] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.640286] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.640407] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.640983] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.641178] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.641463] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.641647] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.641995] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.642168] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.642289] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.642492] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.642613] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.643166] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.643300] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.643439] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.643728] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.644020] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.644332] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.644452] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.644695] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.644912] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.645077] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.645605] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.646071] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.646095] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.646223] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.646575] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.646695] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.646901] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.647121] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.647303] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.647833] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.648296] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.648422] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.648556] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.648894] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.649287] pci 0000:09:00.0: enabling Extended Tags [ 0.649627] pci 0000:09:00.0: supports D1 D2 [ 0.649740] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.650102] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.650228] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.650356] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.650658] pci_bus 0000:0a: extended config space not accessible [ 0.650829] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.651034] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.651132] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.651307] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.651661] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.651951] pci 0000:0a:00.0: supports D1 D2 [ 0.652064] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.652399] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.652545] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.652675] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.653061] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.653165] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.653375] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.653536] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.654058] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.654200] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.654345] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.654563] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.654708] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.655273] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.655474] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.655683] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.655844] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.656356] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.656593] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.656738] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.656955] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.657084] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.657603] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.657806] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.658016] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.658130] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.658640] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.658869] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.659014] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.659148] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.659293] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.659809] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.660010] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.660174] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.660337] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.660868] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.661099] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.661244] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.661462] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.661606] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.662194] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.662321] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.662449] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.662589] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.663057] pci_bus 0000:00: on NUMA node 0 [ 0.663154] xen: registering gsi 13 triggering 1 polarity 0 [ 0.664133] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.664328] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.664521] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.664710] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.664898] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.665016] ACPI: PCI: Interrupt link LNKE disabled [ 0.665156] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.665275] ACPI: PCI: Interrupt link LNKF disabled [ 0.665458] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.665576] ACPI: PCI: Interrupt link LNKG disabled [ 0.665760] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.665884] ACPI: PCI: Interrupt link LNKH disabled [ 0.666151] xen:balloon: Initialising balloon driver [ 0.666289] iommu: Default domain type: Translated [ 0.674087] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.674274] SCSI subsystem initialized [ 0.674402] libata version 3.00 loaded. [ 0.674402] ACPI: bus type USB registered [ 0.674402] usbcore: registered new interface driver usbfs [ 0.674402] usbcore: registered new interface driver hub [ 0.674493] usbcore: registered new device driver usb [ 0.674620] pps_core: LinuxPPS API ver. 1 registered [ 0.675085] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.675237] PTP clock support registered [ 0.675380] Advanced Linux Sound Architecture Driver Initialized. [ 0.675380] NetLabel: Initializing [ 0.675489] NetLabel: domain hash size = 128 [ 0.675601] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.676102] NetLabel: unlabeled traffic allowed by default [ 0.676242] PCI: Using ACPI for IRQ routing [ 0.711615] PCI: pci_cache_line_size set to 64 bytes [ 0.712393] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.712396] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.712419] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.712419] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.712419] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.712516] vgaarb: loaded [ 0.714842] clocksource: Switched to clocksource tsc-early [ 0.715069] VFS: Disk quotas dquot_6.6.0 [ 0.715069] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.715069] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.715069] pnp: PnP ACPI init [ 0.715235] xen: registering gsi 8 triggering 1 polarity 0 [ 0.715428] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.715442] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.715442] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.715442] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.715442] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.715442] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.716168] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.716298] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.716418] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.716538] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.716658] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.716778] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.716898] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.717334] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.717459] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.717577] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.717702] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.717820] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.718266] xen: registering gsi 4 triggering 1 polarity 0 [ 0.718272] Already setup the GSI :4 [ 0.718384] pnp 00:03: [dma 0 disabled] [ 0.718695] xen: registering gsi 3 triggering 1 polarity 0 [ 0.718707] pnp 00:04: [dma 0 disabled] [ 0.719299] pnp: PnP ACPI: found 5 devices [ 0.750492] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.750649] NET: Registered PF_INET protocol family [ 0.750810] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.751221] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.751375] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.751522] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.751673] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.751842] TCP: Hash tables configured (established 4096 bind 4096) [ 0.751984] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.752154] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.752349] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.752736] RPC: Registered named UNIX socket transport module. [ 0.752863] RPC: Registered udp transport module. [ 0.752977] RPC: Registered tcp transport module. [ 0.753104] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.753671] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.753869] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.754033] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.754216] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.754366] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.754542] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.754716] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.754851] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.755013] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.755172] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.755318] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.755462] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.755607] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.755730] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.755875] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.756019] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.756187] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.756312] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.756487] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.756633] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.756778] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.756900] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.757045] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.757210] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.757358] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.757493] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.757627] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.757798] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.758001] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.758204] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.758328] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.758468] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.758629] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.758749] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.758888] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.759050] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.759198] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.759374] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.759540] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.759660] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.759799] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.759963] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.760136] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.760307] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.760461] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.760643] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.760798] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.760951] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.761119] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.761292] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.761413] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.761552] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.761686] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.761860] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.762043] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.762189] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.762311] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.762431] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.762553] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.762672] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.762791] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.762936] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.763052] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.763198] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.763317] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.763466] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.763583] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.763702] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.763818] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.763937] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.764053] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.764196] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.764745] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.764998] xen: registering gsi 19 triggering 0 polarity 1 [ 0.765025] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.773917] xen: registering gsi 18 triggering 0 polarity 1 [ 0.773938] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.791299] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 17026 usecs [ 0.791539] xen: registering gsi 18 triggering 0 polarity 1 [ 0.791545] Already setup the GSI :18 [ 0.808337] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 16456 usecs [ 0.808547] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.808722] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.808800] Unpacking initramfs... [ 0.808842] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.809237] kvm: no hardware support for 'kvm_intel' [ 0.817071] has_svm: not amd or hygon [ 0.817247] kvm: no hardware support for 'kvm_amd' [ 0.817366] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.817725] clocksource: Switched to clocksource tsc [ 0.820244] Initialise system trusted keyrings [ 0.820555] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.822034] NFS: Registering the id_resolver key type [ 0.822157] Key type id_resolver registered [ 0.822269] Key type id_legacy registered [ 0.822483] 9p: Installing v9fs 9p2000 file system support [ 0.836759] Key type asymmetric registered [ 0.836885] Asymmetric key parser 'x509' registered [ 0.837022] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.837179] io scheduler mq-deadline registered [ 0.837292] io scheduler kyber registered [ 0.838228] xen: registering gsi 16 triggering 0 polarity 1 [ 0.838257] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.838840] xen: registering gsi 16 triggering 0 polarity 1 [ 0.838846] Already setup the GSI :16 [ 0.839435] xen: registering gsi 16 triggering 0 polarity 1 [ 0.839441] Already setup the GSI :16 [ 0.839782] xen: registering gsi 16 triggering 0 polarity 1 [ 0.839787] Already setup the GSI :16 [ 0.840106] xen: registering gsi 16 triggering 0 polarity 1 [ 0.840110] Already setup the GSI :16 [ 0.840701] xen: registering gsi 16 triggering 0 polarity 1 [ 0.840705] Already setup the GSI :16 [ 0.841284] xen: registering gsi 16 triggering 0 polarity 1 [ 0.841289] Already setup the GSI :16 [ 0.841741] xen: registering gsi 17 triggering 0 polarity 1 [ 0.841757] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.842090] xen: registering gsi 19 triggering 0 polarity 1 [ 0.842095] Already setup the GSI :19 [ 0.842535] xen: registering gsi 16 triggering 0 polarity 1 [ 0.842539] Already setup the GSI :16 [ 0.843217] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.843391] ACPI: button: Power Button [PWRB] [ 0.843537] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.843780] ACPI: button: Power Button [PWRF] [ 0.844060] Monitor-Mwait will be used to enter C-1 state [ 0.844094] Monitor-Mwait will be used to enter C-2 state [ 0.844110] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.844503] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.844879] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.845346] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.845658] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.846173] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.846871] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.847362] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.848178] xen:xen_evtchn: Event-channel device installed [ 0.848379] xen_pciback: backend is vpci [ 0.849157] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.849470] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.850192] hpet_acpi_add: no address or irqs in _CRS [ 0.850429] Non-volatile memory driver v1.3 [ 0.850550] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.853346] loop: module loaded [ 0.859411] ahci 0000:00:1f.2: version 3.0 [ 0.859512] xen: registering gsi 16 triggering 0 polarity 1 [ 0.859521] Already setup the GSI :16 [ 0.859873] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.860024] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.875232] scsi host0: ahci [ 0.875647] scsi host1: ahci [ 0.876005] scsi host2: ahci [ 0.876349] scsi host3: ahci [ 0.876705] scsi host4: ahci [ 0.877046] scsi host5: ahci [ 0.877199] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 0.877346] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 0.877490] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 0.877652] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 0.877797] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 0.877941] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 0.878378] tun: Universal TUN/TAP device driver, 1.6 [ 0.878623] e100: Intel(R) PRO/100 Network Driver [ 0.878739] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.878876] sky2: driver version 1.30 [ 0.879063] xen_netfront: Initialising Xen virtual ethernet driver [ 0.879443] xen: registering gsi 18 triggering 0 polarity 1 [ 0.879452] Already setup the GSI :18 [ 0.879672] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.879877] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.880054] ehci-pci 0000:00:1a.0: debug port 2 [ 0.884191] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.890611] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.890848] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.890998] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.891142] usb usb1: Product: EHCI Host Controller [ 0.891257] usb usb1: Manufacturer: Linux 6.1.110+ ehci_hcd [ 0.891373] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.891664] hub 1-0:1.0: USB hub found [ 0.891790] hub 1-0:1.0: 2 ports detected [ 0.892150] xen: registering gsi 18 triggering 0 polarity 1 [ 0.892159] Already setup the GSI :18 [ 0.892350] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.892554] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.892746] ehci-pci 0000:00:1d.0: debug port 2 [ 0.896836] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.903611] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.903835] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.903984] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.904128] usb usb2: Product: EHCI Host Controller [ 0.904242] usb usb2: Manufacturer: Linux 6.1.110+ ehci_hcd [ 0.904358] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.904652] hub 2-0:1.0: USB hub found [ 0.904778] hub 2-0:1.0: 2 ports detected [ 0.905207] xen: registering gsi 19 triggering 0 polarity 1 [ 0.905216] Already setup the GSI :19 [ 0.905419] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.905628] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.906847] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.907313] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.907516] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.907673] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.907878] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.908026] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.908170] usb usb3: Product: xHCI Host Controller [ 0.908284] usb usb3: Manufacturer: Linux 6.1.110+ xhci-hcd [ 0.908400] usb usb3: SerialNumber: 0000:00:14.0 [ 0.908726] hub 3-0:1.0: USB hub found [ 0.908884] hub 3-0:1.0: 8 ports detected [ 0.909998] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.910156] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.910308] usb usb4: Product: xHCI Host Controller [ 0.910422] usb usb4: Manufacturer: Linux 6.1.110+ xhci-hcd [ 0.910556] usb usb4: SerialNumber: 0000:00:14.0 [ 0.910833] hub 4-0:1.0: USB hub found [ 0.910964] hub 4-0:1.0: 6 ports detected [ 0.912039] usbcore: registered new interface driver usblp [ 0.912174] usbcore: registered new interface driver usb-storage [ 0.915038] Freeing initrd memory: 20628K [ 0.915250] i8042: PNP: No PS/2 controller found. [ 0.915605] rtc_cmos 00:00: RTC can wake from S4 [ 0.916289] rtc_cmos 00:00: registered as rtc0 [ 0.916446] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.916673] device-mapper: uevent: version 1.0.3 [ 0.916745] xen: registering gsi 18 triggering 0 polarity 1 [ 0.916796] Already setup the GSI :18 [ 0.916876] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.916942] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.917094] intel_pstate: CPU model not supported [ 0.917125] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.917227] hid: raw HID events driver (C) Jiri Kosina [ 0.917697] usbcore: registered new interface driver usbhid [ 0.917776] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.917815] usbhid: USB HID core driver [ 0.918496] Initializing XFRM netlink socket [ 0.918780] NET: Registered PF_INET6 protocol family [ 0.919459] Segment Routing with IPv6 [ 0.919600] In-situ OAM (IOAM) with IPv6 [ 0.919746] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.919998] NET: Registered PF_PACKET protocol family [ 0.920154] 9pnet: Installing 9P2000 support [ 0.920279] Key type dns_resolver registered [ 0.921038] IPI shorthand broadcast: enabled [ 0.921176] sched_clock: Marking stable (883439311, 37558618)->(1767897639, -846899710) [ 0.921755] registered taskstats version 1 [ 0.921871] Loading compiled-in X.509 certificates [ 0.924383] PM: Magic number: 8:208:494 [ 0.924625] printk: console [netcon0] enabled [ 0.924741] netconsole: network logging started [ 0.925075] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.936896] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.937237] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.937827] ALSA device list: [ 0.937918] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.937959] No soundcards found. [ 1.127654] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.143709] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.151628] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.187027] ata2: SATA link down (SStatus 0 SControl 300) [ 1.188893] ata6: SATA link down (SStatus 0 SControl 300) [ 1.189033] ata1: SATA link down (SStatus 0 SControl 300) [ 1.189185] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.189330] ata4: SATA link down (SStatus 0 SControl 300) [ 1.189485] ata5: SATA link down (SStatus 0 SControl 300) [ 1.190450] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.264256] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.264411] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.264810] hub 1-1:1.0: USB hub found [ 1.265003] hub 1-1:1.0: 4 ports detected [ 1.272137] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.272293] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.272694] hub 2-1:1.0: USB hub found [ 1.272881] hub 2-1:1.0: 4 ports detected [ 1.274752] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.274908] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.279407] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.279711] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.279836] usb 3-3: Product: USB2.0 Hub [ 1.280686] hub 3-3:1.0: USB hub found [ 1.281156] hub 3-3:1.0: 4 ports detected [ 1.302623] ata3.00: configured for UDMA/133 [ 1.302915] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.303503] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.303573] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.303813] sd 2:0:0:0: [sda] Write Protect is off [ 1.303940] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.304024] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.304256] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.323839] sda: sda1 sda2 < sda5 > [ 1.324204] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.325449] Freeing unused kernel image (initmem) memory: 1580K [ 1.325591] Write protecting the kernel read-only data: 22528k [ 1.343465] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.344768] Freeing unused kernel image (rodata/data gap) memory: 1560K [ 1.397615] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.523905] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.524059] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.524687] hub 3-4:1.0: USB hub found [ 1.524899] hub 3-4:1.0: 4 ports detected [ 1.587603] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.665063] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.665214] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.665359] usb 3-3.2: Product: USB2.0 Hub [ 1.666026] hub 3-3.2:1.0: USB hub found [ 1.666474] hub 3-3.2:1.0: 4 ports detected [ 1.808021] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.808148] Run /init as init process [ 1.808259] with arguments: [ 1.808260] /init [ 1.808261] placeholder [ 1.808262] with environment: [ 1.808263] HOME=/ [ 1.808264] TERM=linux [ 1.818588] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.925001] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.925202] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.931151] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 2.251728] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.251906] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.252346] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.252617] xen: registering gsi 16 triggering 0 polarity 1 [ 2.252628] Already setup the GSI :16 [ 2.255803] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.255928] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.256135] xen: registering gsi 16 triggering 0 polarity 1 [ 2.256144] Already setup the GSI :16 [ 2.282788] pps pps0: new PPS source ptp0 [ 2.282972] igb 0000:07:00.0: added PHC on eth0 [ 2.283106] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.283227] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.283392] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.283508] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.283757] xen: registering gsi 17 triggering 0 polarity 1 [ 2.283767] Already setup the GSI :17 [ 2.295803] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 2.297056] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 2.297398] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.313371] pps pps1: new PPS source ptp1 [ 2.313577] igb 0000:08:00.0: added PHC on eth1 [ 2.313711] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.313832] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.313997] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.314112] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.314345] xen: registering gsi 16 triggering 0 polarity 1 [ 2.314353] Already setup the GSI :16 [ 2.372574] igb 0000:0b:00.0: added PHC on eth2 [ 2.372714] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.372835] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.373038] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.373161] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.373393] xen: registering gsi 17 triggering 0 polarity 1 [ 2.373402] Already setup the GSI :17 [ 2.431372] igb 0000:0b:00.1: added PHC on eth3 [ 2.431512] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.431645] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.431849] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.431965] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.432202] xen: registering gsi 18 triggering 0 polarity 1 [ 2.432211] Already setup the GSI :18 [ 2.490188] igb 0000:0b:00.2: added PHC on eth4 [ 2.490352] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.490484] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.490732] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.490864] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.491110] xen: registering gsi 19 triggering 0 polarity 1 [ 2.491119] Already setup the GSI :19 [ 2.548861] igb 0000:0b:00.3: added PHC on eth5 [ 2.548999] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.549120] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.549330] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.549446] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.552931] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.560780] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.576889] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.588034] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.596726] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.604854] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 3.001963] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.132669] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.132793] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.427502] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.427932] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.428151] xen: registering gsi 17 triggering 0 polarity 1 [ 3.428161] Already setup the GSI :17 [ 4.166137] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.295997] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.296276] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.587504] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.589961] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 4.600147] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 5.009883] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.017279] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.632622] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.785372] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.802440] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.889269] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.467239] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.467408] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.467613] device enx0cc47a9f87be entered promiscuous mode [ 15.031206] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 15.133802] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 15.134086] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 15.134210] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 15.134492] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready